@serfab/cadre-core 1.9.0 → 1.11.0

package/src/strand-wake-protocol.ts

@@ -1,401 +1,401 @@
-/**
- * Control-network push-wake transport.
- *
- * Lets a same-cadre peer — typically an always-on server that participates in a
- * strand and sees new activity — signal a hibernating cadre peer to bring that
- * strand online, pull pending activity, and re-hibernate. Push-wake travels the
- * **control network** (the per-party network connecting this party's own cadre
- * nodes), which is the only network a hibernating peer keeps connected.
- *
- * Modeled directly on `seed-bootstrap.ts`: a dedicated libp2p protocol id,
- * 4-byte big-endian length-prefixed JSON frames, `node.handle` for the receiver,
- * `node.dialProtocol` for the sender, and the shared `ControlStream` primitives
- * from `control-stream.ts`. The exchange is a single request → single ack on one
- * stream (like seed delivery), so each side reads to EOF (under a read timeout)
- * and decodes one frame via the shared {@link decodeLengthPrefixedFrame} guard.
- *
- * **Authorization (v1):** a wake is low-risk — it only causes the receiver to
- * spend resources coming online for a strand it already participates in — so the
- * receiver carries no per-request signature and instead defers entirely to the
- * injected `isMember` predicate. `CadreNode` injects its AUTHORIZED-membership
- * predicate there (`isAuthorizedMember`: the sender's `CadrePeer` row must carry
- * a voucher that verifies against an owner key in the receiver's node-local
- * trusted-owner anchor), so a peer that merely published rows into the replicated
- * control DB is refused. This module stays agnostic: it enforces whatever
- * predicate it is given.
- */
-
-import debug from 'debug';
-import type { Libp2p, Connection } from '@libp2p/interface';
-import type { Multiaddr } from '@multiformats/multiaddr';
-import type { StrandInstance, WakeRequest, WakeAck } from './types.js';
-import { decodeLengthPrefixedFrame } from './seed-bootstrap.js';
-import { type ControlStream, exchangeFrame, readStreamToEnd, replyAndClose } from './control-stream.js';
-import { tryAddrsInTurn } from './peer-dial.js';
-import { relayedRequestBudgetMs } from './link-budget.js';
-
-const log = debug('sereus:cadre:strand-wake');
-
-/** Protocol id for control-network push-wake (parallel to `/sereus/seed/1.0.0`). */
-export const WAKE_PROTOCOL = '/sereus/strand-wake/1.0.0';
-
-/**
- * Maximum wake frame size. Wake messages are tiny (a strand id + short reason),
- * so this is a defensive cap — far below the 1MB seed ceiling — that bounds the
- * bytes a peer can make the receiver buffer per stream.
- */
-const MAX_WAKE_SIZE = 64 * 1024;
-
-/**
- * Default deadline for ONE wake attempt — dial, request, ack — at the default declared link
- * (ms): `relayedRequestBudgetMs` in `link-budget.ts`, because the target may be reachable
- * only through a relay and the attempt has to open that connection before the exchange.
- * {@link dialWake} derives it from {@link DialWakeOptions.linkRoundTripMs} instead when given.
- *
- * It holds only link work because the receiver acks as soon as it has DECIDED, before the
- * wake itself runs ({@link StrandWakeService.processWakeRequest}).
- *
- * NOTE: the receiver's membership check (two live control reads) runs inside this deadline and
- * is not counted. In steady state those reads touch only held blocks and do not consult the
- * cohort. If a wake or address request is seen timing out while the receiver's membership read
- * is consulting, count one membership decision in this deadline or answer the check from the
- * materialized authorized-peer snapshot. See docs/cadre-consistency.md → "Deadlines Over
- * Optimystic's Reads and Commits".
- */
-export const DEFAULT_WAKE_TIMEOUT_MS = relayedRequestBudgetMs();
-
-/**
- * Whole attempts one {@link dialWake} call budgets for: a stale signaling address, then the
- * direct address that works.
- */
-export const WAKE_DIAL_ATTEMPTS = 2;
-
-/**
- * Default budget for a WHOLE {@link dialWake} call at the default declared link, in ms —
- * every candidate address together, not each one: {@link WAKE_DIAL_ATTEMPTS} attempt
- * deadlines.
- *
- * Without it the cost of a wake is (candidate count × {@link
- * DEFAULT_WAKE_TIMEOUT_MS}), a number nothing chooses or bounds. That is not
- * hypothetical: an address behind a dropped NAT mapping, or any host that
- * blackholes rather than sending a RST, burns its full attempt timeout instead
- * of failing in milliseconds, so a five-address peer would cost five attempts.
- *
- * This makes the TARGET PEER the unit rather than the address — the same
- * decision, for the same reason, as
- * `DEFAULT_CONTROL_COHORT_DIAL_TIMEOUT_MS` in `peer-dial.ts`, though not the same
- * count: that one is sized to fit several dead addresses ahead of a working one,
- * while a wake target is expected to be awake and reachable on its first or second
- * address. Two whole attempts so a reachable peer whose signaling address is stale
- * still gets a genuine try at its direct one; a peer needing longer than that is
- * not "asleep and reachable", which is the only case a wake is for. The last
- * attempt inside the budget gets whatever remains of it, so the call returns at
- * the budget, not past it.
- *
- * Override per call with {@link DialWakeOptions.budgetMs} — tests that drive
- * dead addresses on purpose set it low so a dial's duration is a chosen number
- * rather than a transitive libp2p default stretched by machine load.
- */
-export const DEFAULT_WAKE_DIAL_BUDGET_MS = WAKE_DIAL_ATTEMPTS * DEFAULT_WAKE_TIMEOUT_MS;
-
-/** Default time the receiver waits for an inbound wake frame before aborting (ms). */
-// eslint-disable-next-line no-restricted-syntax -- link-independent: a receiver cap on one small request frame on a stream the peer already opened; it bounds a peer that opens a stream and never sends, not the dial
-const DEFAULT_WAKE_READ_TIMEOUT_MS = 10_000;
-
-/** Default cap on concurrent inbound wake streams a single peer can pin open. */
-const DEFAULT_MAX_CONCURRENT_WAKES = 100;
-
-/**
- * Read a libp2p stream to EOF and decode the single length-prefixed JSON frame
- * it carries. Bounded by `timeoutMs` (a never-half-closing peer is aborted, not
- * awaited forever) and capped at {@link MAX_WAKE_SIZE}, reusing the shared
- * {@link decodeLengthPrefixedFrame} guard for the prefix/length checks.
- */
-async function readFrame<T>(stream: ControlStream, timeoutMs: number): Promise<T> {
-  const data = await readStreamToEnd(stream, { maxBytes: MAX_WAKE_SIZE, timeoutMs, label: 'Wake' });
-  const body = decodeLengthPrefixedFrame(data, MAX_WAKE_SIZE);
-  return JSON.parse(new TextDecoder().decode(body)) as T;
-}
-
-/**
- * Dependencies the {@link StrandWakeService} receiver needs from its host
- * (`CadreNode`), injected so the service is testable without a full node.
- */
-export interface StrandWakeServiceOptions {
-  /** Membership gate: is the remote peer a `CadrePeer` member of this cadre? */
-  isMember(remotePeerId: string): Promise<boolean>;
-  /** Look up a local strand instance by id (undefined if not participated in). */
-  getStrand(strandId: string): StrandInstance | undefined;
-  /**
-   * Trigger the local wake path for a hibernating/idle strand. Wired to
-   * `CadreNode.wakeStrand` (→ `HibernationManager` → `resumeStrand`); `resumeStrand`
-   * joins any resume already in flight, so a push-wake racing a check-in shares its
-   * runtime build.
-   *
-   * Started, not awaited: the ack goes back before the strand is up, and a wake
-   * that fails afterwards is logged here rather than reported to the sender.
-   */
-  wake(strandId: string): Promise<void>;
-  /**
-   * Time to wait for the inbound wake frame before aborting the read (ms).
-   * Defaults to {@link DEFAULT_WAKE_READ_TIMEOUT_MS}. Bounds a buggy/compromised
-   * own-cadre node that opens a stream and never half-closes its write end.
-   */
-  readTimeoutMs?: number;
-  /**
-   * Cap on concurrent inbound wake streams (defaults to
-   * {@link DEFAULT_MAX_CONCURRENT_WAKES}). Over the cap, a non-accepting ack is
-   * returned without invoking the wake path.
-   *
-   * It counts streams, not wakes: a wake started after its ack is no longer
-   * counted. Those are bounded by the strands this node participates in instead,
-   * since an unknown strand is refused before any wake starts and the wake path
-   * coalesces per strand.
-   */
-  maxConcurrent?: number;
-}
-
-/**
- * Receiver side of the push-wake protocol. Registers a `WAKE_PROTOCOL` handler
- * on the control node and, for each inbound {@link WakeRequest}, gates on cadre
- * membership, replies with a {@link WakeAck}, and starts resuming the named
- * strand if it is hibernating/idle and we participate in it.
- */
-export class StrandWakeService {
-  private readonly options: StrandWakeServiceOptions;
-  private readonly readTimeoutMs: number;
-  private readonly maxConcurrent: number;
-  private node: Libp2p | null = null;
-  /** In-flight inbound wake streams, used to enforce {@link maxConcurrent}. */
-  private activeStreams = 0;
-
-  constructor(options: StrandWakeServiceOptions) {
-    this.options = options;
-    this.readTimeoutMs = options.readTimeoutMs ?? DEFAULT_WAKE_READ_TIMEOUT_MS;
-    this.maxConcurrent = options.maxConcurrent ?? DEFAULT_MAX_CONCURRENT_WAKES;
-  }
-
-  /** Number of in-flight inbound wake streams. */
-  get activeCount(): number {
-    return this.activeStreams;
-  }
-
-  /**
-   * Register the wake protocol handler on the control node. Rejects when libp2p
-   * refuses the registration; the node reference is kept only once the handler
-   * is in place.
-   */
-  async initialize(node: Libp2p): Promise<void> {
-    // `runOnLimitedConnection: true` is REQUIRED for the relay path: a NAT'd
-    // receiver is reached over a circuit-relay connection, which libp2p marks
-    // "limited" (the relay caps its data/duration). Without this the receiver
-    // would refuse the inbound wake stream on exactly the connection the
-    // protocol is designed to use (see the relay note on `dialWake`).
-    await node.handle(WAKE_PROTOCOL, async (rawStream: unknown, rawConnection: unknown) => {
-      const remotePeerId = (rawConnection as Connection).remotePeer.toString();
-      await this.handleStream(rawStream as ControlStream, remotePeerId);
-    }, { runOnLimitedConnection: true });
-    this.node = node;
-    log('StrandWakeService registered handler: %s', WAKE_PROTOCOL);
-  }
-
-  /** Unregister the handler and release the node reference. */
-  async shutdown(): Promise<void> {
-    if (this.node) {
-      await this.node.unhandle(WAKE_PROTOCOL);
-      this.node = null;
-      log('StrandWakeService shutdown');
-    }
-  }
-
-  /**
-   * Read the inbound request, decide the wake, and write the ack.
-   *
-   * Three hardening layers, all reported as a non-accepting ack rather than a
-   * dropped/hung stream: a concurrency cap (over {@link maxConcurrent}, reply
-   * without touching the wake path), a read timeout (a peer that never
-   * half-closes is aborted inside {@link readFrame}/`readStreamToEnd`), and the
-   * existing malformed/oversized-frame guard.
-   */
-  private async handleStream(stream: ControlStream, remotePeerId: string): Promise<void> {
-    log('Incoming wake request from: %s', remotePeerId);
-
-    if (this.activeStreams >= this.maxConcurrent) {
-      log('Rejecting wake from %s: %d concurrent streams at cap %d', remotePeerId, this.activeStreams, this.maxConcurrent);
-      await replyAndClose(stream, { accepted: false, reason: 'Too many concurrent wake requests' } satisfies WakeAck, 'Wake');
-      return;
-    }
-
-    this.activeStreams++;
-    try {
-      await replyAndClose(stream, await this.answerStream(stream, remotePeerId), 'Wake');
-    } finally {
-      this.activeStreams--;
-    }
-  }
-
-  /** Read and decide one inbound request; any failure becomes a non-accepting ack. */
-  private async answerStream(stream: ControlStream, remotePeerId: string): Promise<WakeAck> {
-    try {
-      const request = await readFrame<WakeRequest>(stream, this.readTimeoutMs);
-      return await this.processWakeRequest(request, remotePeerId);
-    } catch (err) {
-      log('Error handling wake request from %s: %o', remotePeerId, err);
-      return { accepted: false, reason: err instanceof Error ? err.message : 'Unknown error' };
-    }
-  }
-
-  /**
-   * Decide the wake for a decoded request and start it. Exposed (not private) so
-   * the decision matrix can be unit-tested directly.
-   *
-   * - Non-member sender → rejected (`accepted: false`).
-   * - Unknown / not-participated strand → rejected.
-   * - Hibernating or idle strand → `accepted` with that status, and a wake started.
-   * - Already-live strand → no-op, `accepted` with current status.
-   *
-   * The wake is not awaited, so the ack means "a wake was started", not "the
-   * strand is up". Awaiting it would put the whole resume — a sibling address
-   * collection, a strand node build, a relay reservation drive — inside the
-   * sender's attempt deadline, coupling that deadline to this node's own budgets.
-   */
-  async processWakeRequest(request: WakeRequest, remotePeerId: string): Promise<WakeAck> {
-    // The injected membership predicate is the whole v1 authorization (CadreNode
-    // supplies the voucher-anchored one); only a peer it admits may ask us to wake.
-    if (!(await this.options.isMember(remotePeerId))) {
-      log('Rejecting wake from non-member %s', remotePeerId);
-      return { accepted: false, reason: 'Sender is not a cadre member' };
-    }
-
-    const instance = this.options.getStrand(request.strandId);
-    if (!instance) {
-      log('Rejecting wake for unknown/unparticipated strand %s', request.strandId);
-      return { accepted: false, reason: 'Strand not found or not participated in' };
-    }
-
-    // Read before the wake starts: the wake path mutates the shared instance.
-    const status = instance.status;
-    if (status === 'hibernating' || status === 'idle') {
-      log('Waking strand %s on push from %s (reason=%s)', request.strandId, remotePeerId, request.reason ?? 'unspecified');
-      this.startWake(request.strandId);
-    } else {
-      log('Strand %s already %s; push-wake is a no-op', request.strandId, status);
-    }
-
-    return { accepted: true, status };
-  }
-
-  /**
-   * Start a wake without awaiting it — the same fire-and-forget an activity-driven
-   * local wake uses (`HibernationManager`), which also coalesces the two.
-   */
-  private startWake(strandId: string): void {
-    void this.options.wake(strandId).catch((err: unknown) => {
-      log('Push-wake of strand %s failed after it was accepted: %o', strandId, err);
-    });
-  }
-}
-
-/** Options for {@link dialWake}. */
-export interface DialWakeOptions {
-  /**
-   * The sender's declared link round trip (`NetworkConfig.linkRoundTripMs`), from which
-   * both deadlines below are derived when not given. Unset means the declared default.
-   */
-  linkRoundTripMs?: number;
-  /** Per-ATTEMPT timeout in ms (default: derived as {@link DEFAULT_WAKE_TIMEOUT_MS} is). */
-  timeoutMs?: number;
-  /**
-   * Budget for the whole call — every candidate together (default:
-   * {@link WAKE_DIAL_ATTEMPTS} × the per-attempt timeout, as {@link DEFAULT_WAKE_DIAL_BUDGET_MS}).
-   */
-  budgetMs?: number;
-  /** Override the protocol id (defaults to {@link WAKE_PROTOCOL}). */
-  protocolId?: string;
-}
-
-/**
- * Sender side: dial a target's control-network address(es), send a
- * {@link WakeRequest} over `WAKE_PROTOCOL`, and return the peer's {@link WakeAck}.
- *
- * Tries each candidate address in order (signaling/relay first, as produced by
- * `CadreNode.resolvePeerAddrs`) until one dials, so a NAT'd peer is reachable via
- * its circuit-relay address. Each attempt is bounded by `timeoutMs` and the call
- * as a whole by `budgetMs` (see {@link DEFAULT_WAKE_DIAL_BUDGET_MS}); a candidate
- * the budget leaves no room for is reported as untried rather than silently
- * dropped.
- *
- * Throws if no address is dialable — with an error naming EVERY candidate and
- * why it failed, not merely the last one ({@link tryAddrsInTurn}). That
- * distinction is not cosmetic: with only the last candidate's message the
- * failure that mattered (usually the signaling address, tried first) is
- * invisible outside a debug log, and the surfaced message points at whichever
- * address happened to be tried last.
- *
- * The candidate loop is deliberately explicit rather than one
- * `dialProtocol(addrs)` call. libp2p sorts any multi-address dial with
- * `defaultAddressSorter`, whose `circuitRelayAddressesLast` pass would demote
- * exactly the signaling address this ordering puts first — silently inverting
- * it, with no per-dial sorter override to opt out of. For the same reason this
- * does not use `dialPeerAddrs`, which puts relayed addresses last.
- *
- * NOTE: unlike `dialPeerAddrs`, this does not drop addresses that relay through this node, so a
- * relay waking a peer that holds a reservation on it tries that address and gets `Can not dial
- * self` (fast, then the next candidate). If wakes are ever sent from a relay to its own
- * reservation holders routinely, share `dialPeerAddrs`'s filter here.
- */
-export async function dialWake(
-  node: Libp2p,
-  addrs: Multiaddr[],
-  request: WakeRequest,
-  options: DialWakeOptions = {}
-): Promise<WakeAck> {
-  if (addrs.length === 0) {
-    throw new Error('No dialable address for wake target');
-  }
-  const protocolId = options.protocolId ?? WAKE_PROTOCOL;
-  const perAddressMs = options.timeoutMs ?? relayedRequestBudgetMs(options.linkRoundTripMs);
-  const budget = {
-    perAddressMs,
-    totalMs: options.budgetMs ?? WAKE_DIAL_ATTEMPTS * perAddressMs,
-  };
-  // The attempt's signal aborts the in-flight dialProtocol and resets the live
-  // stream, so neither the connect nor the ack-read leaks.
-  return await tryAddrsInTurn(addrs, budget, 'Wake dial', (addr, signal, attemptMs) =>
-    sendWake(node, addr, protocolId, request, attemptMs, signal));
-}
-
-/**
- * Open one stream, send the request, half-close, and read the ack.
- *
- * `signal` is the per-attempt deadline from {@link dialWake}: it goes to
- * `dialProtocol` so a timeout during connect aborts the dial, and into
- * {@link exchangeFrame} so a timeout after the stream is open resets it —
- * releasing the otherwise unbounded ack-read.
- */
-async function sendWake(
-  node: Libp2p,
-  addr: Multiaddr,
-  protocolId: string,
-  request: WakeRequest,
-  timeoutMs: number,
-  signal: AbortSignal,
-): Promise<WakeAck> {
-  // `runOnLimitedConnection: true`: the target may be reachable only over a
-  // circuit-relay connection (the signaling-first addr), which libp2p marks
-  // "limited". The wake exchange is a single tiny request→ack well within the
-  // relay's data/duration cap, so opening it on the limited connection is safe
-  // and is the whole point of dialing the relay address.
-  const rawStream = await node.dialProtocol(addr, protocolId, { runOnLimitedConnection: true, signal });
-
-  const ack = await exchangeFrame(
-    rawStream as unknown as ControlStream,
-    signal,
-    request,
-    (stream) => readFrame<WakeAck>(stream, timeoutMs),
-    'Wake dial aborted by timeout',
-  );
-
-  log('Wake ack from %s: accepted=%s status=%s', addr.toString(), ack.accepted, ack.status ?? '-');
-  return ack;
-}
+/**
+ * Control-network push-wake transport.
+ *
+ * Lets a same-cadre peer — typically an always-on server that participates in a
+ * strand and sees new activity — signal a hibernating cadre peer to bring that
+ * strand online, pull pending activity, and re-hibernate. Push-wake travels the
+ * **control network** (the per-party network connecting this party's own cadre
+ * nodes), which is the only network a hibernating peer keeps connected.
+ *
+ * Modeled directly on `seed-bootstrap.ts`: a dedicated libp2p protocol id,
+ * 4-byte big-endian length-prefixed JSON frames, `node.handle` for the receiver,
+ * `node.dialProtocol` for the sender, and the shared `ControlStream` primitives
+ * from `control-stream.ts`. The exchange is a single request → single ack on one
+ * stream (like seed delivery), so each side reads to EOF (under a read timeout)
+ * and decodes one frame via the shared {@link decodeLengthPrefixedFrame} guard.
+ *
+ * **Authorization (v1):** a wake is low-risk — it only causes the receiver to
+ * spend resources coming online for a strand it already participates in — so the
+ * receiver carries no per-request signature and instead defers entirely to the
+ * injected `isMember` predicate. `CadreNode` injects its AUTHORIZED-membership
+ * predicate there (`isAuthorizedMember`: the sender's `CadrePeer` row must carry
+ * a voucher that verifies against an owner key in the receiver's node-local
+ * trusted-owner anchor), so a peer that merely published rows into the replicated
+ * control DB is refused. This module stays agnostic: it enforces whatever
+ * predicate it is given.
+ */
+
+import debug from 'debug';
+import type { Libp2p, Connection } from '@libp2p/interface';
+import type { Multiaddr } from '@multiformats/multiaddr';
+import type { StrandInstance, WakeRequest, WakeAck } from './types.js';
+import { decodeLengthPrefixedFrame } from './seed-bootstrap.js';
+import { type ControlStream, exchangeFrame, readStreamToEnd, replyAndClose } from './control-stream.js';
+import { tryAddrsInTurn } from './peer-dial.js';
+import { relayedRequestBudgetMs } from './link-budget.js';
+
+const log = debug('sereus:cadre:strand-wake');
+
+/** Protocol id for control-network push-wake (parallel to `/sereus/seed/1.0.0`). */
+export const WAKE_PROTOCOL = '/sereus/strand-wake/1.0.0';
+
+/**
+ * Maximum wake frame size. Wake messages are tiny (a strand id + short reason),
+ * so this is a defensive cap — far below the 1MB seed ceiling — that bounds the
+ * bytes a peer can make the receiver buffer per stream.
+ */
+const MAX_WAKE_SIZE = 64 * 1024;
+
+/**
+ * Default deadline for ONE wake attempt — dial, request, ack — at the default declared link
+ * (ms): `relayedRequestBudgetMs` in `link-budget.ts`, because the target may be reachable
+ * only through a relay and the attempt has to open that connection before the exchange.
+ * {@link dialWake} derives it from {@link DialWakeOptions.linkRoundTripMs} instead when given.
+ *
+ * It holds only link work because the receiver acks as soon as it has DECIDED, before the
+ * wake itself runs ({@link StrandWakeService.processWakeRequest}).
+ *
+ * NOTE: the receiver's membership check (two live control reads) runs inside this deadline and
+ * is not counted. In steady state those reads touch only held blocks and do not consult the
+ * cohort. If a wake or address request is seen timing out while the receiver's membership read
+ * is consulting, count one membership decision in this deadline or answer the check from the
+ * materialized authorized-peer snapshot. See docs/cadre-consistency.md → "Deadlines Over
+ * Optimystic's Reads and Commits".
+ */
+export const DEFAULT_WAKE_TIMEOUT_MS = relayedRequestBudgetMs();
+
+/**
+ * Whole attempts one {@link dialWake} call budgets for: a stale signaling address, then the
+ * direct address that works.
+ */
+export const WAKE_DIAL_ATTEMPTS = 2;
+
+/**
+ * Default budget for a WHOLE {@link dialWake} call at the default declared link, in ms —
+ * every candidate address together, not each one: {@link WAKE_DIAL_ATTEMPTS} attempt
+ * deadlines.
+ *
+ * Without it the cost of a wake is (candidate count × {@link
+ * DEFAULT_WAKE_TIMEOUT_MS}), a number nothing chooses or bounds. That is not
+ * hypothetical: an address behind a dropped NAT mapping, or any host that
+ * blackholes rather than sending a RST, burns its full attempt timeout instead
+ * of failing in milliseconds, so a five-address peer would cost five attempts.
+ *
+ * This makes the TARGET PEER the unit rather than the address — the same
+ * decision, for the same reason, as
+ * `DEFAULT_CONTROL_COHORT_DIAL_TIMEOUT_MS` in `peer-dial.ts`, though not the same
+ * count: that one is sized to fit several dead addresses ahead of a working one,
+ * while a wake target is expected to be awake and reachable on its first or second
+ * address. Two whole attempts so a reachable peer whose signaling address is stale
+ * still gets a genuine try at its direct one; a peer needing longer than that is
+ * not "asleep and reachable", which is the only case a wake is for. The last
+ * attempt inside the budget gets whatever remains of it, so the call returns at
+ * the budget, not past it.
+ *
+ * Override per call with {@link DialWakeOptions.budgetMs} — tests that drive
+ * dead addresses on purpose set it low so a dial's duration is a chosen number
+ * rather than a transitive libp2p default stretched by machine load.
+ */
+export const DEFAULT_WAKE_DIAL_BUDGET_MS = WAKE_DIAL_ATTEMPTS * DEFAULT_WAKE_TIMEOUT_MS;
+
+/** Default time the receiver waits for an inbound wake frame before aborting (ms). */
+// eslint-disable-next-line no-restricted-syntax -- link-independent: a receiver cap on one small request frame on a stream the peer already opened; it bounds a peer that opens a stream and never sends, not the dial
+const DEFAULT_WAKE_READ_TIMEOUT_MS = 10_000;
+
+/** Default cap on concurrent inbound wake streams a single peer can pin open. */
+const DEFAULT_MAX_CONCURRENT_WAKES = 100;
+
+/**
+ * Read a libp2p stream to EOF and decode the single length-prefixed JSON frame
+ * it carries. Bounded by `timeoutMs` (a never-half-closing peer is aborted, not
+ * awaited forever) and capped at {@link MAX_WAKE_SIZE}, reusing the shared
+ * {@link decodeLengthPrefixedFrame} guard for the prefix/length checks.
+ */
+async function readFrame<T>(stream: ControlStream, timeoutMs: number): Promise<T> {
+  const data = await readStreamToEnd(stream, { maxBytes: MAX_WAKE_SIZE, timeoutMs, label: 'Wake' });
+  const body = decodeLengthPrefixedFrame(data, MAX_WAKE_SIZE);
+  return JSON.parse(new TextDecoder().decode(body)) as T;
+}
+
+/**
+ * Dependencies the {@link StrandWakeService} receiver needs from its host
+ * (`CadreNode`), injected so the service is testable without a full node.
+ */
+export interface StrandWakeServiceOptions {
+  /** Membership gate: is the remote peer a `CadrePeer` member of this cadre? */
+  isMember(remotePeerId: string): Promise<boolean>;
+  /** Look up a local strand instance by id (undefined if not participated in). */
+  getStrand(strandId: string): StrandInstance | undefined;
+  /**
+   * Trigger the local wake path for a hibernating/idle strand. Wired to
+   * `CadreNode.wakeStrand` (→ `HibernationManager` → `resumeStrand`); `resumeStrand`
+   * joins any resume already in flight, so a push-wake racing a check-in shares its
+   * runtime build.
+   *
+   * Started, not awaited: the ack goes back before the strand is up, and a wake
+   * that fails afterwards is logged here rather than reported to the sender.
+   */
+  wake(strandId: string): Promise<void>;
+  /**
+   * Time to wait for the inbound wake frame before aborting the read (ms).
+   * Defaults to {@link DEFAULT_WAKE_READ_TIMEOUT_MS}. Bounds a buggy/compromised
+   * own-cadre node that opens a stream and never half-closes its write end.
+   */
+  readTimeoutMs?: number;
+  /**
+   * Cap on concurrent inbound wake streams (defaults to
+   * {@link DEFAULT_MAX_CONCURRENT_WAKES}). Over the cap, a non-accepting ack is
+   * returned without invoking the wake path.
+   *
+   * It counts streams, not wakes: a wake started after its ack is no longer
+   * counted. Those are bounded by the strands this node participates in instead,
+   * since an unknown strand is refused before any wake starts and the wake path
+   * coalesces per strand.
+   */
+  maxConcurrent?: number;
+}
+
+/**
+ * Receiver side of the push-wake protocol. Registers a `WAKE_PROTOCOL` handler
+ * on the control node and, for each inbound {@link WakeRequest}, gates on cadre
+ * membership, replies with a {@link WakeAck}, and starts resuming the named
+ * strand if it is hibernating/idle and we participate in it.
+ */
+export class StrandWakeService {
+  private readonly options: StrandWakeServiceOptions;
+  private readonly readTimeoutMs: number;
+  private readonly maxConcurrent: number;
+  private node: Libp2p | null = null;
+  /** In-flight inbound wake streams, used to enforce {@link maxConcurrent}. */
+  private activeStreams = 0;
+
+  constructor(options: StrandWakeServiceOptions) {
+    this.options = options;
+    this.readTimeoutMs = options.readTimeoutMs ?? DEFAULT_WAKE_READ_TIMEOUT_MS;
+    this.maxConcurrent = options.maxConcurrent ?? DEFAULT_MAX_CONCURRENT_WAKES;
+  }
+
+  /** Number of in-flight inbound wake streams. */
+  get activeCount(): number {
+    return this.activeStreams;
+  }
+
+  /**
+   * Register the wake protocol handler on the control node. Rejects when libp2p
+   * refuses the registration; the node reference is kept only once the handler
+   * is in place.
+   */
+  async initialize(node: Libp2p): Promise<void> {
+    // `runOnLimitedConnection: true` is REQUIRED for the relay path: a NAT'd
+    // receiver is reached over a circuit-relay connection, which libp2p marks
+    // "limited" (the relay caps its data/duration). Without this the receiver
+    // would refuse the inbound wake stream on exactly the connection the
+    // protocol is designed to use (see the relay note on `dialWake`).
+    await node.handle(WAKE_PROTOCOL, async (rawStream: unknown, rawConnection: unknown) => {
+      const remotePeerId = (rawConnection as Connection).remotePeer.toString();
+      await this.handleStream(rawStream as ControlStream, remotePeerId);
+    }, { runOnLimitedConnection: true });
+    this.node = node;
+    log('StrandWakeService registered handler: %s', WAKE_PROTOCOL);
+  }
+
+  /** Unregister the handler and release the node reference. */
+  async shutdown(): Promise<void> {
+    if (this.node) {
+      await this.node.unhandle(WAKE_PROTOCOL);
+      this.node = null;
+      log('StrandWakeService shutdown');
+    }
+  }
+
+  /**
+   * Read the inbound request, decide the wake, and write the ack.
+   *
+   * Three hardening layers, all reported as a non-accepting ack rather than a
+   * dropped/hung stream: a concurrency cap (over {@link maxConcurrent}, reply
+   * without touching the wake path), a read timeout (a peer that never
+   * half-closes is aborted inside {@link readFrame}/`readStreamToEnd`), and the
+   * existing malformed/oversized-frame guard.
+   */
+  private async handleStream(stream: ControlStream, remotePeerId: string): Promise<void> {
+    log('Incoming wake request from: %s', remotePeerId);
+
+    if (this.activeStreams >= this.maxConcurrent) {
+      log('Rejecting wake from %s: %d concurrent streams at cap %d', remotePeerId, this.activeStreams, this.maxConcurrent);
+      await replyAndClose(stream, { accepted: false, reason: 'Too many concurrent wake requests' } satisfies WakeAck, 'Wake');
+      return;
+    }
+
+    this.activeStreams++;
+    try {
+      await replyAndClose(stream, await this.answerStream(stream, remotePeerId), 'Wake');
+    } finally {
+      this.activeStreams--;
+    }
+  }
+
+  /** Read and decide one inbound request; any failure becomes a non-accepting ack. */
+  private async answerStream(stream: ControlStream, remotePeerId: string): Promise<WakeAck> {
+    try {
+      const request = await readFrame<WakeRequest>(stream, this.readTimeoutMs);
+      return await this.processWakeRequest(request, remotePeerId);
+    } catch (err) {
+      log('Error handling wake request from %s: %o', remotePeerId, err);
+      return { accepted: false, reason: err instanceof Error ? err.message : 'Unknown error' };
+    }
+  }
+
+  /**
+   * Decide the wake for a decoded request and start it. Exposed (not private) so
+   * the decision matrix can be unit-tested directly.
+   *
+   * - Non-member sender → rejected (`accepted: false`).
+   * - Unknown / not-participated strand → rejected.
+   * - Hibernating or idle strand → `accepted` with that status, and a wake started.
+   * - Already-live strand → no-op, `accepted` with current status.
+   *
+   * The wake is not awaited, so the ack means "a wake was started", not "the
+   * strand is up". Awaiting it would put the whole resume — a sibling address
+   * collection, a strand node build, a relay reservation drive — inside the
+   * sender's attempt deadline, coupling that deadline to this node's own budgets.
+   */
+  async processWakeRequest(request: WakeRequest, remotePeerId: string): Promise<WakeAck> {
+    // The injected membership predicate is the whole v1 authorization (CadreNode
+    // supplies the voucher-anchored one); only a peer it admits may ask us to wake.
+    if (!(await this.options.isMember(remotePeerId))) {
+      log('Rejecting wake from non-member %s', remotePeerId);
+      return { accepted: false, reason: 'Sender is not a cadre member' };
+    }
+
+    const instance = this.options.getStrand(request.strandId);
+    if (!instance) {
+      log('Rejecting wake for unknown/unparticipated strand %s', request.strandId);
+      return { accepted: false, reason: 'Strand not found or not participated in' };
+    }
+
+    // Read before the wake starts: the wake path mutates the shared instance.
+    const status = instance.status;
+    if (status === 'hibernating' || status === 'idle') {
+      log('Waking strand %s on push from %s (reason=%s)', request.strandId, remotePeerId, request.reason ?? 'unspecified');
+      this.startWake(request.strandId);
+    } else {
+      log('Strand %s already %s; push-wake is a no-op', request.strandId, status);
+    }
+
+    return { accepted: true, status };
+  }
+
+  /**
+   * Start a wake without awaiting it — the same fire-and-forget an activity-driven
+   * local wake uses (`HibernationManager`), which also coalesces the two.
+   */
+  private startWake(strandId: string): void {
+    void this.options.wake(strandId).catch((err: unknown) => {
+      log('Push-wake of strand %s failed after it was accepted: %o', strandId, err);
+    });
+  }
+}
+
+/** Options for {@link dialWake}. */
+export interface DialWakeOptions {
+  /**
+   * The sender's declared link round trip (`NetworkConfig.linkRoundTripMs`), from which
+   * both deadlines below are derived when not given. Unset means the declared default.
+   */
+  linkRoundTripMs?: number;
+  /** Per-ATTEMPT timeout in ms (default: derived as {@link DEFAULT_WAKE_TIMEOUT_MS} is). */
+  timeoutMs?: number;
+  /**
+   * Budget for the whole call — every candidate together (default:
+   * {@link WAKE_DIAL_ATTEMPTS} × the per-attempt timeout, as {@link DEFAULT_WAKE_DIAL_BUDGET_MS}).
+   */
+  budgetMs?: number;
+  /** Override the protocol id (defaults to {@link WAKE_PROTOCOL}). */
+  protocolId?: string;
+}
+
+/**
+ * Sender side: dial a target's control-network address(es), send a
+ * {@link WakeRequest} over `WAKE_PROTOCOL`, and return the peer's {@link WakeAck}.
+ *
+ * Tries each candidate address in order (signaling/relay first, as produced by
+ * `CadreNode.resolvePeerAddrs`) until one dials, so a NAT'd peer is reachable via
+ * its circuit-relay address. Each attempt is bounded by `timeoutMs` and the call
+ * as a whole by `budgetMs` (see {@link DEFAULT_WAKE_DIAL_BUDGET_MS}); a candidate
+ * the budget leaves no room for is reported as untried rather than silently
+ * dropped.
+ *
+ * Throws if no address is dialable — with an error naming EVERY candidate and
+ * why it failed, not merely the last one ({@link tryAddrsInTurn}). That
+ * distinction is not cosmetic: with only the last candidate's message the
+ * failure that mattered (usually the signaling address, tried first) is
+ * invisible outside a debug log, and the surfaced message points at whichever
+ * address happened to be tried last.
+ *
+ * The candidate loop is deliberately explicit rather than one
+ * `dialProtocol(addrs)` call. libp2p sorts any multi-address dial with
+ * `defaultAddressSorter`, whose `circuitRelayAddressesLast` pass would demote
+ * exactly the signaling address this ordering puts first — silently inverting
+ * it, with no per-dial sorter override to opt out of. For the same reason this
+ * does not use `dialPeerAddrs`, which puts relayed addresses last.
+ *
+ * NOTE: unlike `dialPeerAddrs`, this does not drop addresses that relay through this node, so a
+ * relay waking a peer that holds a reservation on it tries that address and gets `Can not dial
+ * self` (fast, then the next candidate). If wakes are ever sent from a relay to its own
+ * reservation holders routinely, share `dialPeerAddrs`'s filter here.
+ */
+export async function dialWake(
+  node: Libp2p,
+  addrs: Multiaddr[],
+  request: WakeRequest,
+  options: DialWakeOptions = {}
+): Promise<WakeAck> {
+  if (addrs.length === 0) {
+    throw new Error('No dialable address for wake target');
+  }
+  const protocolId = options.protocolId ?? WAKE_PROTOCOL;
+  const perAddressMs = options.timeoutMs ?? relayedRequestBudgetMs(options.linkRoundTripMs);
+  const budget = {
+    perAddressMs,
+    totalMs: options.budgetMs ?? WAKE_DIAL_ATTEMPTS * perAddressMs,
+  };
+  // The attempt's signal aborts the in-flight dialProtocol and resets the live
+  // stream, so neither the connect nor the ack-read leaks.
+  return await tryAddrsInTurn(addrs, budget, 'Wake dial', (addr, signal, attemptMs) =>
+    sendWake(node, addr, protocolId, request, attemptMs, signal));
+}
+
+/**
+ * Open one stream, send the request, half-close, and read the ack.
+ *
+ * `signal` is the per-attempt deadline from {@link dialWake}: it goes to
+ * `dialProtocol` so a timeout during connect aborts the dial, and into
+ * {@link exchangeFrame} so a timeout after the stream is open resets it —
+ * releasing the otherwise unbounded ack-read.
+ */
+async function sendWake(
+  node: Libp2p,
+  addr: Multiaddr,
+  protocolId: string,
+  request: WakeRequest,
+  timeoutMs: number,
+  signal: AbortSignal,
+): Promise<WakeAck> {
+  // `runOnLimitedConnection: true`: the target may be reachable only over a
+  // circuit-relay connection (the signaling-first addr), which libp2p marks
+  // "limited". The wake exchange is a single tiny request→ack well within the
+  // relay's data/duration cap, so opening it on the limited connection is safe
+  // and is the whole point of dialing the relay address.
+  const rawStream = await node.dialProtocol(addr, protocolId, { runOnLimitedConnection: true, signal });
+
+  const ack = await exchangeFrame(
+    rawStream as unknown as ControlStream,
+    signal,
+    request,
+    (stream) => readFrame<WakeAck>(stream, timeoutMs),
+    'Wake dial aborted by timeout',
+  );
+
+  log('Wake ack from %s: accepted=%s status=%s', addr.toString(), ack.accepted, ack.status ?? '-');
+  return ack;
+}