@sentry/api 0.379.0 → 0.380.0

package/dist/types.gen.d.ts

@@ -1426,7 +1426,7 @@ export type CustomInboundFilter = {
      */
     dataType: 'all' | 'error' | 'log' | 'metric' | 'span';
     /**
-     * Conditions are combined with AND: an event must match every condition to be filtered out. There is no OR between conditions, so e.g. two release conditions can express a range (`>2 AND <4`). To broaden matching, widen a condition's values or add separate filters.
+     * Conditions are combined with AND: an event must match every condition to be filtered out. There is no OR between conditions, so e.g. two release conditions can express a range (`gte 2.0` and `lt 4.0`). To broaden matching, widen a condition's values or add separate filters.
      */
     conditions: Array<{
         /**
@@ -1442,7 +1442,24 @@ export type CustomInboundFilter = {
          */
         type: 'error_type' | 'error_message' | 'log_message' | 'metric_name' | 'release' | 'ip_address' | 'geo_country_code';
         /**
-         * Glob patterns the field is matched against. The condition matches when any pattern matches, so multiple values act as OR.
+         * How the field compares to `value`. `glob` matches the field against each value as a glob pattern. `equals`, `starts_with`, `contains` and `ends_with` match the field against each value case-insensitively, with every character read literally; `does_not_start_with`, `does_not_contain` and `does_not_end_with` match when no value does. `ip_address` only takes `equals`, where a value is an address or a CIDR range. `gt`, `gte`, `lt` and `lte` compare one value as a version and only apply to `release`.
+         *
+         * * `glob`
+         * * `equals`
+         * * `starts_with`
+         * * `contains`
+         * * `ends_with`
+         * * `does_not_start_with`
+         * * `does_not_contain`
+         * * `does_not_end_with`
+         * * `gt`
+         * * `gte`
+         * * `lt`
+         * * `lte`
+         */
+        operator?: 'glob' | 'equals' | 'starts_with' | 'contains' | 'ends_with' | 'does_not_start_with' | 'does_not_contain' | 'does_not_end_with' | 'gt' | 'gte' | 'lt' | 'lte';
+        /**
+         * The values the field is compared to. The condition matches when any value matches, so multiple values act as OR; a negated operator matches when none does. A version comparison takes one release with a version such as `1.2.0` or `myapp@1.2.0`. A comparison with a package only applies to releases of that package.
          */
         value: Array<string>;
     }>;
@@ -1477,7 +1494,24 @@ export type CustomInboundFilterCondition = {
      */
     type: 'error_type' | 'error_message' | 'log_message' | 'metric_name' | 'release' | 'ip_address' | 'geo_country_code';
     /**
-     * Glob patterns the field is matched against. The condition matches when any pattern matches, so multiple values act as OR.
+     * How the field compares to `value`. `glob` matches the field against each value as a glob pattern. `equals`, `starts_with`, `contains` and `ends_with` match the field against each value case-insensitively, with every character read literally; `does_not_start_with`, `does_not_contain` and `does_not_end_with` match when no value does. `ip_address` only takes `equals`, where a value is an address or a CIDR range. `gt`, `gte`, `lt` and `lte` compare one value as a version and only apply to `release`.
+     *
+     * * `glob`
+     * * `equals`
+     * * `starts_with`
+     * * `contains`
+     * * `ends_with`
+     * * `does_not_start_with`
+     * * `does_not_contain`
+     * * `does_not_end_with`
+     * * `gt`
+     * * `gte`
+     * * `lt`
+     * * `lte`
+     */
+    operator?: 'glob' | 'equals' | 'starts_with' | 'contains' | 'ends_with' | 'does_not_start_with' | 'does_not_contain' | 'does_not_end_with' | 'gt' | 'gte' | 'lt' | 'lte';
+    /**
+     * The values the field is compared to. The condition matches when any value matches, so multiple values act as OR; a negated operator matches when none does. A version comparison takes one release with a version such as `1.2.0` or `myapp@1.2.0`. A comparison with a package only applies to releases of that package.
      */
     value: Array<string>;
 };
@@ -12355,7 +12389,7 @@ export type CustomInboundFilterWritable = {
      */
     dataType: 'all' | 'error' | 'log' | 'metric' | 'span';
     /**
-     * Conditions are combined with AND: an event must match every condition to be filtered out. There is no OR between conditions, so e.g. two release conditions can express a range (`>2 AND <4`). To broaden matching, widen a condition's values or add separate filters.
+     * Conditions are combined with AND: an event must match every condition to be filtered out. There is no OR between conditions, so e.g. two release conditions can express a range (`gte 2.0` and `lt 4.0`). To broaden matching, widen a condition's values or add separate filters.
      */
     conditions: Array<{
         /**
@@ -12371,7 +12405,24 @@ export type CustomInboundFilterWritable = {
          */
         type: 'error_type' | 'error_message' | 'log_message' | 'metric_name' | 'release' | 'ip_address' | 'geo_country_code';
         /**
-         * Glob patterns the field is matched against. The condition matches when any pattern matches, so multiple values act as OR.
+         * How the field compares to `value`. `glob` matches the field against each value as a glob pattern. `equals`, `starts_with`, `contains` and `ends_with` match the field against each value case-insensitively, with every character read literally; `does_not_start_with`, `does_not_contain` and `does_not_end_with` match when no value does. `ip_address` only takes `equals`, where a value is an address or a CIDR range. `gt`, `gte`, `lt` and `lte` compare one value as a version and only apply to `release`.
+         *
+         * * `glob`
+         * * `equals`
+         * * `starts_with`
+         * * `contains`
+         * * `ends_with`
+         * * `does_not_start_with`
+         * * `does_not_contain`
+         * * `does_not_end_with`
+         * * `gt`
+         * * `gte`
+         * * `lt`
+         * * `lte`
+         */
+        operator?: 'glob' | 'equals' | 'starts_with' | 'contains' | 'ends_with' | 'does_not_start_with' | 'does_not_contain' | 'does_not_end_with' | 'gt' | 'gte' | 'lt' | 'lte';
+        /**
+         * The values the field is compared to. The condition matches when any value matches, so multiple values act as OR; a negated operator matches when none does. A version comparison takes one release with a version such as `1.2.0` or `myapp@1.2.0`. A comparison with a package only applies to releases of that package.
          */
         value: Array<string>;
     }>;
@@ -30973,7 +31024,7 @@ export type ListProjectCustomInboundFiltersResponses = {
          */
         dataType: 'all' | 'error' | 'log' | 'metric' | 'span';
         /**
-         * Conditions are combined with AND: an event must match every condition to be filtered out. There is no OR between conditions, so e.g. two release conditions can express a range (`>2 AND <4`). To broaden matching, widen a condition's values or add separate filters.
+         * Conditions are combined with AND: an event must match every condition to be filtered out. There is no OR between conditions, so e.g. two release conditions can express a range (`gte 2.0` and `lt 4.0`). To broaden matching, widen a condition's values or add separate filters.
          */
         conditions: Array<{
             /**
@@ -30989,7 +31040,24 @@ export type ListProjectCustomInboundFiltersResponses = {
              */
             type: 'error_type' | 'error_message' | 'log_message' | 'metric_name' | 'release' | 'ip_address' | 'geo_country_code';
             /**
-             * Glob patterns the field is matched against. The condition matches when any pattern matches, so multiple values act as OR.
+             * How the field compares to `value`. `glob` matches the field against each value as a glob pattern. `equals`, `starts_with`, `contains` and `ends_with` match the field against each value case-insensitively, with every character read literally; `does_not_start_with`, `does_not_contain` and `does_not_end_with` match when no value does. `ip_address` only takes `equals`, where a value is an address or a CIDR range. `gt`, `gte`, `lt` and `lte` compare one value as a version and only apply to `release`.
+             *
+             * * `glob`
+             * * `equals`
+             * * `starts_with`
+             * * `contains`
+             * * `ends_with`
+             * * `does_not_start_with`
+             * * `does_not_contain`
+             * * `does_not_end_with`
+             * * `gt`
+             * * `gte`
+             * * `lt`
+             * * `lte`
+             */
+            operator?: 'glob' | 'equals' | 'starts_with' | 'contains' | 'ends_with' | 'does_not_start_with' | 'does_not_contain' | 'does_not_end_with' | 'gt' | 'gte' | 'lt' | 'lte';
+            /**
+             * The values the field is compared to. The condition matches when any value matches, so multiple values act as OR; a negated operator matches when none does. A version comparison takes one release with a version such as `1.2.0` or `myapp@1.2.0`. A comparison with a package only applies to releases of that package.
              */
             value: Array<string>;
         }>;
@@ -31029,7 +31097,7 @@ export type CreateProjectCustomInboundFilterData = {
          */
         dataType: 'all' | 'error' | 'log' | 'metric' | 'span';
         /**
-         * Conditions are combined with AND: an event must match every condition to be filtered out. There is no OR between conditions, so e.g. two release conditions can express a range (`>2 AND <4`). To broaden matching, widen a condition's values or add separate filters.
+         * Conditions are combined with AND: an event must match every condition to be filtered out. There is no OR between conditions, so e.g. two release conditions can express a range (`gte 2.0` and `lt 4.0`). To broaden matching, widen a condition's values or add separate filters.
          */
         conditions: Array<{
             /**
@@ -31045,7 +31113,24 @@ export type CreateProjectCustomInboundFilterData = {
              */
             type: 'error_type' | 'error_message' | 'log_message' | 'metric_name' | 'release' | 'ip_address' | 'geo_country_code';
             /**
-             * Glob patterns the field is matched against. The condition matches when any pattern matches, so multiple values act as OR.
+             * How the field compares to `value`. `glob` matches the field against each value as a glob pattern. `equals`, `starts_with`, `contains` and `ends_with` match the field against each value case-insensitively, with every character read literally; `does_not_start_with`, `does_not_contain` and `does_not_end_with` match when no value does. `ip_address` only takes `equals`, where a value is an address or a CIDR range. `gt`, `gte`, `lt` and `lte` compare one value as a version and only apply to `release`.
+             *
+             * * `glob`
+             * * `equals`
+             * * `starts_with`
+             * * `contains`
+             * * `ends_with`
+             * * `does_not_start_with`
+             * * `does_not_contain`
+             * * `does_not_end_with`
+             * * `gt`
+             * * `gte`
+             * * `lt`
+             * * `lte`
+             */
+            operator?: 'glob' | 'equals' | 'starts_with' | 'contains' | 'ends_with' | 'does_not_start_with' | 'does_not_contain' | 'does_not_end_with' | 'gt' | 'gte' | 'lt' | 'lte';
+            /**
+             * The values the field is compared to. The condition matches when any value matches, so multiple values act as OR; a negated operator matches when none does. A version comparison takes one release with a version such as `1.2.0` or `myapp@1.2.0`. A comparison with a package only applies to releases of that package.
              */
             value: Array<string>;
         }>;
@@ -31110,7 +31195,7 @@ export type CreateProjectCustomInboundFilterResponses = {
          */
         dataType: 'all' | 'error' | 'log' | 'metric' | 'span';
         /**
-         * Conditions are combined with AND: an event must match every condition to be filtered out. There is no OR between conditions, so e.g. two release conditions can express a range (`>2 AND <4`). To broaden matching, widen a condition's values or add separate filters.
+         * Conditions are combined with AND: an event must match every condition to be filtered out. There is no OR between conditions, so e.g. two release conditions can express a range (`gte 2.0` and `lt 4.0`). To broaden matching, widen a condition's values or add separate filters.
          */
         conditions: Array<{
             /**
@@ -31126,7 +31211,24 @@ export type CreateProjectCustomInboundFilterResponses = {
              */
             type: 'error_type' | 'error_message' | 'log_message' | 'metric_name' | 'release' | 'ip_address' | 'geo_country_code';
             /**
-             * Glob patterns the field is matched against. The condition matches when any pattern matches, so multiple values act as OR.
+             * How the field compares to `value`. `glob` matches the field against each value as a glob pattern. `equals`, `starts_with`, `contains` and `ends_with` match the field against each value case-insensitively, with every character read literally; `does_not_start_with`, `does_not_contain` and `does_not_end_with` match when no value does. `ip_address` only takes `equals`, where a value is an address or a CIDR range. `gt`, `gte`, `lt` and `lte` compare one value as a version and only apply to `release`.
+             *
+             * * `glob`
+             * * `equals`
+             * * `starts_with`
+             * * `contains`
+             * * `ends_with`
+             * * `does_not_start_with`
+             * * `does_not_contain`
+             * * `does_not_end_with`
+             * * `gt`
+             * * `gte`
+             * * `lt`
+             * * `lte`
+             */
+            operator?: 'glob' | 'equals' | 'starts_with' | 'contains' | 'ends_with' | 'does_not_start_with' | 'does_not_contain' | 'does_not_end_with' | 'gt' | 'gte' | 'lt' | 'lte';
+            /**
+             * The values the field is compared to. The condition matches when any value matches, so multiple values act as OR; a negated operator matches when none does. A version comparison takes one release with a version such as `1.2.0` or `myapp@1.2.0`. A comparison with a package only applies to releases of that package.
              */
             value: Array<string>;
         }>;
@@ -31239,7 +31341,7 @@ export type GetProjectCustomInboundFilterResponses = {
          */
         dataType: 'all' | 'error' | 'log' | 'metric' | 'span';
         /**
-         * Conditions are combined with AND: an event must match every condition to be filtered out. There is no OR between conditions, so e.g. two release conditions can express a range (`>2 AND <4`). To broaden matching, widen a condition's values or add separate filters.
+         * Conditions are combined with AND: an event must match every condition to be filtered out. There is no OR between conditions, so e.g. two release conditions can express a range (`gte 2.0` and `lt 4.0`). To broaden matching, widen a condition's values or add separate filters.
          */
         conditions: Array<{
             /**
@@ -31255,7 +31357,24 @@ export type GetProjectCustomInboundFilterResponses = {
              */
             type: 'error_type' | 'error_message' | 'log_message' | 'metric_name' | 'release' | 'ip_address' | 'geo_country_code';
             /**
-             * Glob patterns the field is matched against. The condition matches when any pattern matches, so multiple values act as OR.
+             * How the field compares to `value`. `glob` matches the field against each value as a glob pattern. `equals`, `starts_with`, `contains` and `ends_with` match the field against each value case-insensitively, with every character read literally; `does_not_start_with`, `does_not_contain` and `does_not_end_with` match when no value does. `ip_address` only takes `equals`, where a value is an address or a CIDR range. `gt`, `gte`, `lt` and `lte` compare one value as a version and only apply to `release`.
+             *
+             * * `glob`
+             * * `equals`
+             * * `starts_with`
+             * * `contains`
+             * * `ends_with`
+             * * `does_not_start_with`
+             * * `does_not_contain`
+             * * `does_not_end_with`
+             * * `gt`
+             * * `gte`
+             * * `lt`
+             * * `lte`
+             */
+            operator?: 'glob' | 'equals' | 'starts_with' | 'contains' | 'ends_with' | 'does_not_start_with' | 'does_not_contain' | 'does_not_end_with' | 'gt' | 'gte' | 'lt' | 'lte';
+            /**
+             * The values the field is compared to. The condition matches when any value matches, so multiple values act as OR; a negated operator matches when none does. A version comparison takes one release with a version such as `1.2.0` or `myapp@1.2.0`. A comparison with a package only applies to releases of that package.
              */
             value: Array<string>;
         }>;
@@ -31295,7 +31414,7 @@ export type UpdateProjectCustomInboundFilterData = {
          */
         dataType: 'all' | 'error' | 'log' | 'metric' | 'span';
         /**
-         * Conditions are combined with AND: an event must match every condition to be filtered out. There is no OR between conditions, so e.g. two release conditions can express a range (`>2 AND <4`). To broaden matching, widen a condition's values or add separate filters.
+         * Conditions are combined with AND: an event must match every condition to be filtered out. There is no OR between conditions, so e.g. two release conditions can express a range (`gte 2.0` and `lt 4.0`). To broaden matching, widen a condition's values or add separate filters.
          */
         conditions: Array<{
             /**
@@ -31311,7 +31430,24 @@ export type UpdateProjectCustomInboundFilterData = {
              */
             type: 'error_type' | 'error_message' | 'log_message' | 'metric_name' | 'release' | 'ip_address' | 'geo_country_code';
             /**
-             * Glob patterns the field is matched against. The condition matches when any pattern matches, so multiple values act as OR.
+             * How the field compares to `value`. `glob` matches the field against each value as a glob pattern. `equals`, `starts_with`, `contains` and `ends_with` match the field against each value case-insensitively, with every character read literally; `does_not_start_with`, `does_not_contain` and `does_not_end_with` match when no value does. `ip_address` only takes `equals`, where a value is an address or a CIDR range. `gt`, `gte`, `lt` and `lte` compare one value as a version and only apply to `release`.
+             *
+             * * `glob`
+             * * `equals`
+             * * `starts_with`
+             * * `contains`
+             * * `ends_with`
+             * * `does_not_start_with`
+             * * `does_not_contain`
+             * * `does_not_end_with`
+             * * `gt`
+             * * `gte`
+             * * `lt`
+             * * `lte`
+             */
+            operator?: 'glob' | 'equals' | 'starts_with' | 'contains' | 'ends_with' | 'does_not_start_with' | 'does_not_contain' | 'does_not_end_with' | 'gt' | 'gte' | 'lt' | 'lte';
+            /**
+             * The values the field is compared to. The condition matches when any value matches, so multiple values act as OR; a negated operator matches when none does. A version comparison takes one release with a version such as `1.2.0` or `myapp@1.2.0`. A comparison with a package only applies to releases of that package.
              */
             value: Array<string>;
         }>;
@@ -31380,7 +31516,7 @@ export type UpdateProjectCustomInboundFilterResponses = {
          */
         dataType: 'all' | 'error' | 'log' | 'metric' | 'span';
         /**
-         * Conditions are combined with AND: an event must match every condition to be filtered out. There is no OR between conditions, so e.g. two release conditions can express a range (`>2 AND <4`). To broaden matching, widen a condition's values or add separate filters.
+         * Conditions are combined with AND: an event must match every condition to be filtered out. There is no OR between conditions, so e.g. two release conditions can express a range (`gte 2.0` and `lt 4.0`). To broaden matching, widen a condition's values or add separate filters.
          */
         conditions: Array<{
             /**
@@ -31396,7 +31532,24 @@ export type UpdateProjectCustomInboundFilterResponses = {
              */
             type: 'error_type' | 'error_message' | 'log_message' | 'metric_name' | 'release' | 'ip_address' | 'geo_country_code';
             /**
-             * Glob patterns the field is matched against. The condition matches when any pattern matches, so multiple values act as OR.
+             * How the field compares to `value`. `glob` matches the field against each value as a glob pattern. `equals`, `starts_with`, `contains` and `ends_with` match the field against each value case-insensitively, with every character read literally; `does_not_start_with`, `does_not_contain` and `does_not_end_with` match when no value does. `ip_address` only takes `equals`, where a value is an address or a CIDR range. `gt`, `gte`, `lt` and `lte` compare one value as a version and only apply to `release`.
+             *
+             * * `glob`
+             * * `equals`
+             * * `starts_with`
+             * * `contains`
+             * * `ends_with`
+             * * `does_not_start_with`
+             * * `does_not_contain`
+             * * `does_not_end_with`
+             * * `gt`
+             * * `gte`
+             * * `lt`
+             * * `lte`
+             */
+            operator?: 'glob' | 'equals' | 'starts_with' | 'contains' | 'ends_with' | 'does_not_start_with' | 'does_not_contain' | 'does_not_end_with' | 'gt' | 'gte' | 'lt' | 'lte';
+            /**
+             * The values the field is compared to. The condition matches when any value matches, so multiple values act as OR; a negated operator matches when none does. A version comparison takes one release with a version such as `1.2.0` or `myapp@1.2.0`. A comparison with a package only applies to releases of that package.
              */
             value: Array<string>;
         }>;

package/dist/valibot.gen.d.ts

@@ -416,6 +416,7 @@ export declare const vCustomInboundFilter: v.ObjectSchema<{
     readonly dataType: v.PicklistSchema<["all", "error", "log", "metric", "span"], undefined>;
     readonly conditions: v.ArraySchema<v.ObjectSchema<{
         readonly type: v.PicklistSchema<["error_type", "error_message", "log_message", "metric_name", "release", "ip_address", "geo_country_code"], undefined>;
+        readonly operator: v.OptionalSchema<v.PicklistSchema<["glob", "equals", "starts_with", "contains", "ends_with", "does_not_start_with", "does_not_contain", "does_not_end_with", "gt", "gte", "lt", "lte"], undefined>, undefined>;
         readonly value: v.ArraySchema<v.StringSchema<undefined>, undefined>;
     }, undefined>, undefined>;
     readonly dateCreated: v.SchemaWithPipe<readonly [v.SchemaWithPipe<readonly [v.StringSchema<undefined>, v.IsoTimestampAction<string, undefined>]>, v.ReadonlyAction<string>]>;
@@ -425,6 +426,7 @@ export declare const vCustomInboundFilter: v.ObjectSchema<{
 }, undefined>;
 export declare const vCustomInboundFilterCondition: v.ObjectSchema<{
     readonly type: v.PicklistSchema<["error_type", "error_message", "log_message", "metric_name", "release", "ip_address", "geo_country_code"], undefined>;
+    readonly operator: v.OptionalSchema<v.PicklistSchema<["glob", "equals", "starts_with", "contains", "ends_with", "does_not_start_with", "does_not_contain", "does_not_end_with", "gt", "gte", "lt", "lte"], undefined>, undefined>;
     readonly value: v.ArraySchema<v.StringSchema<undefined>, undefined>;
 }, undefined>;
 /**
@@ -7243,6 +7245,7 @@ export declare const vCustomInboundFilterWritable: v.ObjectSchema<{
     readonly dataType: v.PicklistSchema<["all", "error", "log", "metric", "span"], undefined>;
     readonly conditions: v.ArraySchema<v.ObjectSchema<{
         readonly type: v.PicklistSchema<["error_type", "error_message", "log_message", "metric_name", "release", "ip_address", "geo_country_code"], undefined>;
+        readonly operator: v.OptionalSchema<v.PicklistSchema<["glob", "equals", "starts_with", "contains", "ends_with", "does_not_start_with", "does_not_contain", "does_not_end_with", "gt", "gte", "lt", "lte"], undefined>, undefined>;
         readonly value: v.ArraySchema<v.StringSchema<undefined>, undefined>;
     }, undefined>, undefined>;
     readonly name: v.OptionalSchema<v.UnionSchema<[v.SchemaWithPipe<readonly [v.StringSchema<undefined>, v.MaxLengthAction<string, 256, undefined>]>, v.NullSchema<undefined>], undefined>, undefined>;
@@ -15248,6 +15251,7 @@ export declare const vListProjectCustomInboundFiltersResponse: v.ArraySchema<v.O
     readonly dataType: v.PicklistSchema<["all", "error", "log", "metric", "span"], undefined>;
     readonly conditions: v.ArraySchema<v.ObjectSchema<{
         readonly type: v.PicklistSchema<["error_type", "error_message", "log_message", "metric_name", "release", "ip_address", "geo_country_code"], undefined>;
+        readonly operator: v.OptionalSchema<v.PicklistSchema<["glob", "equals", "starts_with", "contains", "ends_with", "does_not_start_with", "does_not_contain", "does_not_end_with", "gt", "gte", "lt", "lte"], undefined>, undefined>;
         readonly value: v.ArraySchema<v.StringSchema<undefined>, undefined>;
     }, undefined>, undefined>;
     readonly dateCreated: v.SchemaWithPipe<readonly [v.SchemaWithPipe<readonly [v.StringSchema<undefined>, v.IsoTimestampAction<string, undefined>]>, v.ReadonlyAction<string>]>;
@@ -15261,6 +15265,7 @@ export declare const vCreateProjectCustomInboundFilterData: v.ObjectSchema<{
         readonly dataType: v.PicklistSchema<["all", "error", "log", "metric", "span"], undefined>;
         readonly conditions: v.ArraySchema<v.ObjectSchema<{
             readonly type: v.PicklistSchema<["error_type", "error_message", "log_message", "metric_name", "release", "ip_address", "geo_country_code"], undefined>;
+            readonly operator: v.OptionalSchema<v.PicklistSchema<["glob", "equals", "starts_with", "contains", "ends_with", "does_not_start_with", "does_not_contain", "does_not_end_with", "gt", "gte", "lt", "lte"], undefined>, undefined>;
             readonly value: v.ArraySchema<v.StringSchema<undefined>, undefined>;
         }, undefined>, undefined>;
         readonly dateCreated: v.SchemaWithPipe<readonly [v.SchemaWithPipe<readonly [v.StringSchema<undefined>, v.IsoTimestampAction<string, undefined>]>, v.ReadonlyAction<string>]>;
@@ -15279,6 +15284,7 @@ export declare const vCreateProjectCustomInboundFilterResponse: v.ObjectSchema<{
     readonly dataType: v.PicklistSchema<["all", "error", "log", "metric", "span"], undefined>;
     readonly conditions: v.ArraySchema<v.ObjectSchema<{
         readonly type: v.PicklistSchema<["error_type", "error_message", "log_message", "metric_name", "release", "ip_address", "geo_country_code"], undefined>;
+        readonly operator: v.OptionalSchema<v.PicklistSchema<["glob", "equals", "starts_with", "contains", "ends_with", "does_not_start_with", "does_not_contain", "does_not_end_with", "gt", "gte", "lt", "lte"], undefined>, undefined>;
         readonly value: v.ArraySchema<v.StringSchema<undefined>, undefined>;
     }, undefined>, undefined>;
     readonly dateCreated: v.SchemaWithPipe<readonly [v.SchemaWithPipe<readonly [v.StringSchema<undefined>, v.IsoTimestampAction<string, undefined>]>, v.ReadonlyAction<string>]>;
@@ -15313,6 +15319,7 @@ export declare const vGetProjectCustomInboundFilterResponse: v.ObjectSchema<{
     readonly dataType: v.PicklistSchema<["all", "error", "log", "metric", "span"], undefined>;
     readonly conditions: v.ArraySchema<v.ObjectSchema<{
         readonly type: v.PicklistSchema<["error_type", "error_message", "log_message", "metric_name", "release", "ip_address", "geo_country_code"], undefined>;
+        readonly operator: v.OptionalSchema<v.PicklistSchema<["glob", "equals", "starts_with", "contains", "ends_with", "does_not_start_with", "does_not_contain", "does_not_end_with", "gt", "gte", "lt", "lte"], undefined>, undefined>;
         readonly value: v.ArraySchema<v.StringSchema<undefined>, undefined>;
     }, undefined>, undefined>;
     readonly dateCreated: v.SchemaWithPipe<readonly [v.SchemaWithPipe<readonly [v.StringSchema<undefined>, v.IsoTimestampAction<string, undefined>]>, v.ReadonlyAction<string>]>;
@@ -15326,6 +15333,7 @@ export declare const vUpdateProjectCustomInboundFilterData: v.ObjectSchema<{
         readonly dataType: v.PicklistSchema<["all", "error", "log", "metric", "span"], undefined>;
         readonly conditions: v.ArraySchema<v.ObjectSchema<{
             readonly type: v.PicklistSchema<["error_type", "error_message", "log_message", "metric_name", "release", "ip_address", "geo_country_code"], undefined>;
+            readonly operator: v.OptionalSchema<v.PicklistSchema<["glob", "equals", "starts_with", "contains", "ends_with", "does_not_start_with", "does_not_contain", "does_not_end_with", "gt", "gte", "lt", "lte"], undefined>, undefined>;
             readonly value: v.ArraySchema<v.StringSchema<undefined>, undefined>;
         }, undefined>, undefined>;
         readonly dateCreated: v.SchemaWithPipe<readonly [v.SchemaWithPipe<readonly [v.StringSchema<undefined>, v.IsoTimestampAction<string, undefined>]>, v.ReadonlyAction<string>]>;
@@ -15345,6 +15353,7 @@ export declare const vUpdateProjectCustomInboundFilterResponse: v.ObjectSchema<{
     readonly dataType: v.PicklistSchema<["all", "error", "log", "metric", "span"], undefined>;
     readonly conditions: v.ArraySchema<v.ObjectSchema<{
         readonly type: v.PicklistSchema<["error_type", "error_message", "log_message", "metric_name", "release", "ip_address", "geo_country_code"], undefined>;
+        readonly operator: v.OptionalSchema<v.PicklistSchema<["glob", "equals", "starts_with", "contains", "ends_with", "does_not_start_with", "does_not_contain", "does_not_end_with", "gt", "gte", "lt", "lte"], undefined>, undefined>;
         readonly value: v.ArraySchema<v.StringSchema<undefined>, undefined>;
     }, undefined>, undefined>;
     readonly dateCreated: v.SchemaWithPipe<readonly [v.SchemaWithPipe<readonly [v.StringSchema<undefined>, v.IsoTimestampAction<string, undefined>]>, v.ReadonlyAction<string>]>;

package/dist/valibot.js

@@ -1037,6 +1037,20 @@ var vCustomInboundFilter = v.object({
       "ip_address",
       "geo_country_code"
     ]),
+    operator: v.optional(v.picklist([
+      "glob",
+      "equals",
+      "starts_with",
+      "contains",
+      "ends_with",
+      "does_not_start_with",
+      "does_not_contain",
+      "does_not_end_with",
+      "gt",
+      "gte",
+      "lt",
+      "lte"
+    ])),
     value: v.array(v.string())
   })),
   dateCreated: v.pipe(v.pipe(v.string(), v.isoTimestamp()), v.readonly()),
@@ -1054,6 +1068,20 @@ var vCustomInboundFilterCondition = v.object({
     "ip_address",
     "geo_country_code"
   ]),
+  operator: v.optional(v.picklist([
+    "glob",
+    "equals",
+    "starts_with",
+    "contains",
+    "ends_with",
+    "does_not_start_with",
+    "does_not_contain",
+    "does_not_end_with",
+    "gt",
+    "gte",
+    "lt",
+    "lte"
+  ])),
   value: v.array(v.string())
 });
 var vDashboard = v.object({
@@ -8995,6 +9023,20 @@ var vCustomInboundFilterWritable = v.object({
       "ip_address",
       "geo_country_code"
     ]),
+    operator: v.optional(v.picklist([
+      "glob",
+      "equals",
+      "starts_with",
+      "contains",
+      "ends_with",
+      "does_not_start_with",
+      "does_not_contain",
+      "does_not_end_with",
+      "gt",
+      "gte",
+      "lt",
+      "lte"
+    ])),
     value: v.array(v.string())
   })),
   name: v.optional(v.union([v.pipe(v.string(), v.maxLength(256)), v.null()])),
@@ -18814,6 +18856,20 @@ var vListProjectCustomInboundFiltersResponse = v.array(v.object({
       "ip_address",
       "geo_country_code"
     ]),
+    operator: v.optional(v.picklist([
+      "glob",
+      "equals",
+      "starts_with",
+      "contains",
+      "ends_with",
+      "does_not_start_with",
+      "does_not_contain",
+      "does_not_end_with",
+      "gt",
+      "gte",
+      "lt",
+      "lte"
+    ])),
     value: v.array(v.string())
   })),
   dateCreated: v.pipe(v.pipe(v.string(), v.isoTimestamp()), v.readonly()),
@@ -18841,6 +18897,20 @@ var vCreateProjectCustomInboundFilterData = v.object({
         "ip_address",
         "geo_country_code"
       ]),
+      operator: v.optional(v.picklist([
+        "glob",
+        "equals",
+        "starts_with",
+        "contains",
+        "ends_with",
+        "does_not_start_with",
+        "does_not_contain",
+        "does_not_end_with",
+        "gt",
+        "gte",
+        "lt",
+        "lte"
+      ])),
       value: v.array(v.string())
     })),
     dateCreated: v.pipe(v.pipe(v.string(), v.isoTimestamp()), v.readonly()),
@@ -18873,6 +18943,20 @@ var vCreateProjectCustomInboundFilterResponse = v.object({
       "ip_address",
       "geo_country_code"
     ]),
+    operator: v.optional(v.picklist([
+      "glob",
+      "equals",
+      "starts_with",
+      "contains",
+      "ends_with",
+      "does_not_start_with",
+      "does_not_contain",
+      "does_not_end_with",
+      "gt",
+      "gte",
+      "lt",
+      "lte"
+    ])),
     value: v.array(v.string())
   })),
   dateCreated: v.pipe(v.pipe(v.string(), v.isoTimestamp()), v.readonly()),
@@ -18918,6 +19002,20 @@ var vGetProjectCustomInboundFilterResponse = v.object({
       "ip_address",
       "geo_country_code"
     ]),
+    operator: v.optional(v.picklist([
+      "glob",
+      "equals",
+      "starts_with",
+      "contains",
+      "ends_with",
+      "does_not_start_with",
+      "does_not_contain",
+      "does_not_end_with",
+      "gt",
+      "gte",
+      "lt",
+      "lte"
+    ])),
     value: v.array(v.string())
   })),
   dateCreated: v.pipe(v.pipe(v.string(), v.isoTimestamp()), v.readonly()),
@@ -18945,6 +19043,20 @@ var vUpdateProjectCustomInboundFilterData = v.object({
         "ip_address",
         "geo_country_code"
       ]),
+      operator: v.optional(v.picklist([
+        "glob",
+        "equals",
+        "starts_with",
+        "contains",
+        "ends_with",
+        "does_not_start_with",
+        "does_not_contain",
+        "does_not_end_with",
+        "gt",
+        "gte",
+        "lt",
+        "lte"
+      ])),
       value: v.array(v.string())
     })),
     dateCreated: v.pipe(v.pipe(v.string(), v.isoTimestamp()), v.readonly()),
@@ -18978,6 +19090,20 @@ var vUpdateProjectCustomInboundFilterResponse = v.object({
       "ip_address",
       "geo_country_code"
     ]),
+    operator: v.optional(v.picklist([
+      "glob",
+      "equals",
+      "starts_with",
+      "contains",
+      "ends_with",
+      "does_not_start_with",
+      "does_not_contain",
+      "does_not_end_with",
+      "gt",
+      "gte",
+      "lt",
+      "lte"
+    ])),
     value: v.array(v.string())
   })),
   dateCreated: v.pipe(v.pipe(v.string(), v.isoTimestamp()), v.readonly()),

package/dist/zod.gen.d.ts

@@ -2126,13 +2126,16 @@ export declare const zCustomInboundFilter: z.ZodObject<{
     dataType: z.ZodEnum<["all", "error", "log", "metric", "span"]>;
     conditions: z.ZodArray<z.ZodObject<{
         type: z.ZodEnum<["error_type", "error_message", "log_message", "metric_name", "release", "ip_address", "geo_country_code"]>;
+        operator: z.ZodOptional<z.ZodEnum<["glob", "equals", "starts_with", "contains", "ends_with", "does_not_start_with", "does_not_contain", "does_not_end_with", "gt", "gte", "lt", "lte"]>>;
         value: z.ZodArray<z.ZodString, "many">;
     }, "strip", z.ZodTypeAny, {
         value: string[];
         type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+        operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
     }, {
         value: string[];
         type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+        operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
     }>, "many">;
     dateCreated: z.ZodReadonly<z.ZodString>;
     dateUpdated: z.ZodReadonly<z.ZodString>;
@@ -2143,6 +2146,7 @@ export declare const zCustomInboundFilter: z.ZodObject<{
     conditions: {
         value: string[];
         type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+        operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
     }[];
     dateCreated: string;
     dateUpdated: string;
@@ -2154,6 +2158,7 @@ export declare const zCustomInboundFilter: z.ZodObject<{
     conditions: {
         value: string[];
         type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+        operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
     }[];
     dateCreated: string;
     dateUpdated: string;
@@ -2163,13 +2168,16 @@ export declare const zCustomInboundFilter: z.ZodObject<{
 }>;
 export declare const zCustomInboundFilterCondition: z.ZodObject<{
     type: z.ZodEnum<["error_type", "error_message", "log_message", "metric_name", "release", "ip_address", "geo_country_code"]>;
+    operator: z.ZodOptional<z.ZodEnum<["glob", "equals", "starts_with", "contains", "ends_with", "does_not_start_with", "does_not_contain", "does_not_end_with", "gt", "gte", "lt", "lte"]>>;
     value: z.ZodArray<z.ZodString, "many">;
 }, "strip", z.ZodTypeAny, {
     value: string[];
     type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+    operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
 }, {
     value: string[];
     type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+    operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
 }>;
 /**
  * Allows parameters to be defined in snake case, but passed as camel case.
@@ -28644,22 +28652,22 @@ export declare const zProjectSizeStatusCheckRulesResponse: z.ZodObject<{
                 values: z.ZodArray<z.ZodString, "many">;
             }, "strip", z.ZodTypeAny, {
                 values: string[];
-                operator: "in" | "endsWith" | "startsWith" | "contains" | "equals" | "matches" | "notContains" | "notEndsWith" | "notEquals" | "notIn" | "notMatches" | "notStartsWith";
+                operator: "in" | "endsWith" | "startsWith" | "equals" | "contains" | "matches" | "notContains" | "notEndsWith" | "notEquals" | "notIn" | "notMatches" | "notStartsWith";
             }, {
                 values: string[];
-                operator: "in" | "endsWith" | "startsWith" | "contains" | "equals" | "matches" | "notContains" | "notEndsWith" | "notEquals" | "notIn" | "notMatches" | "notStartsWith";
+                operator: "in" | "endsWith" | "startsWith" | "equals" | "contains" | "matches" | "notContains" | "notEndsWith" | "notEquals" | "notIn" | "notMatches" | "notStartsWith";
             }>, "many">;
         }, "strip", z.ZodTypeAny, {
             key: "app_id" | "build_configuration_name" | "git_head_ref" | "platform_name";
             conditions: {
                 values: string[];
-                operator: "in" | "endsWith" | "startsWith" | "contains" | "equals" | "matches" | "notContains" | "notEndsWith" | "notEquals" | "notIn" | "notMatches" | "notStartsWith";
+                operator: "in" | "endsWith" | "startsWith" | "equals" | "contains" | "matches" | "notContains" | "notEndsWith" | "notEquals" | "notIn" | "notMatches" | "notStartsWith";
             }[];
         }, {
             key: "app_id" | "build_configuration_name" | "git_head_ref" | "platform_name";
             conditions: {
                 values: string[];
-                operator: "in" | "endsWith" | "startsWith" | "contains" | "equals" | "matches" | "notContains" | "notEndsWith" | "notEquals" | "notIn" | "notMatches" | "notStartsWith";
+                operator: "in" | "endsWith" | "startsWith" | "equals" | "contains" | "matches" | "notContains" | "notEndsWith" | "notEquals" | "notIn" | "notMatches" | "notStartsWith";
             }[];
         }>, "many">, z.ZodNull]>;
         artifactType: z.ZodEnum<["main_artifact", "watch_artifact", "android_dynamic_feature_artifact", "app_clip_artifact", "all_artifacts"]>;
@@ -28671,7 +28679,7 @@ export declare const zProjectSizeStatusCheckRulesResponse: z.ZodObject<{
             key: "app_id" | "build_configuration_name" | "git_head_ref" | "platform_name";
             conditions: {
                 values: string[];
-                operator: "in" | "endsWith" | "startsWith" | "contains" | "equals" | "matches" | "notContains" | "notEndsWith" | "notEquals" | "notIn" | "notMatches" | "notStartsWith";
+                operator: "in" | "endsWith" | "startsWith" | "equals" | "contains" | "matches" | "notContains" | "notEndsWith" | "notEquals" | "notIn" | "notMatches" | "notStartsWith";
             }[];
         }[] | null;
         artifactType: "main_artifact" | "watch_artifact" | "android_dynamic_feature_artifact" | "app_clip_artifact" | "all_artifacts";
@@ -28685,7 +28693,7 @@ export declare const zProjectSizeStatusCheckRulesResponse: z.ZodObject<{
             key: "app_id" | "build_configuration_name" | "git_head_ref" | "platform_name";
             conditions: {
                 values: string[];
-                operator: "in" | "endsWith" | "startsWith" | "contains" | "equals" | "matches" | "notContains" | "notEndsWith" | "notEquals" | "notIn" | "notMatches" | "notStartsWith";
+                operator: "in" | "endsWith" | "startsWith" | "equals" | "contains" | "matches" | "notContains" | "notEndsWith" | "notEquals" | "notIn" | "notMatches" | "notStartsWith";
             }[];
         }[] | null;
         artifactType: "main_artifact" | "watch_artifact" | "android_dynamic_feature_artifact" | "app_clip_artifact" | "all_artifacts";
@@ -28702,7 +28710,7 @@ export declare const zProjectSizeStatusCheckRulesResponse: z.ZodObject<{
             key: "app_id" | "build_configuration_name" | "git_head_ref" | "platform_name";
             conditions: {
                 values: string[];
-                operator: "in" | "endsWith" | "startsWith" | "contains" | "equals" | "matches" | "notContains" | "notEndsWith" | "notEquals" | "notIn" | "notMatches" | "notStartsWith";
+                operator: "in" | "endsWith" | "startsWith" | "equals" | "contains" | "matches" | "notContains" | "notEndsWith" | "notEquals" | "notIn" | "notMatches" | "notStartsWith";
             }[];
         }[] | null;
         artifactType: "main_artifact" | "watch_artifact" | "android_dynamic_feature_artifact" | "app_clip_artifact" | "all_artifacts";
@@ -28719,7 +28727,7 @@ export declare const zProjectSizeStatusCheckRulesResponse: z.ZodObject<{
             key: "app_id" | "build_configuration_name" | "git_head_ref" | "platform_name";
             conditions: {
                 values: string[];
-                operator: "in" | "endsWith" | "startsWith" | "contains" | "equals" | "matches" | "notContains" | "notEndsWith" | "notEquals" | "notIn" | "notMatches" | "notStartsWith";
+                operator: "in" | "endsWith" | "startsWith" | "equals" | "contains" | "matches" | "notContains" | "notEndsWith" | "notEquals" | "notIn" | "notMatches" | "notStartsWith";
             }[];
         }[] | null;
         artifactType: "main_artifact" | "watch_artifact" | "android_dynamic_feature_artifact" | "app_clip_artifact" | "all_artifacts";
@@ -35354,13 +35362,16 @@ export declare const zCustomInboundFilterWritable: z.ZodObject<{
     dataType: z.ZodEnum<["all", "error", "log", "metric", "span"]>;
     conditions: z.ZodArray<z.ZodObject<{
         type: z.ZodEnum<["error_type", "error_message", "log_message", "metric_name", "release", "ip_address", "geo_country_code"]>;
+        operator: z.ZodOptional<z.ZodEnum<["glob", "equals", "starts_with", "contains", "ends_with", "does_not_start_with", "does_not_contain", "does_not_end_with", "gt", "gte", "lt", "lte"]>>;
         value: z.ZodArray<z.ZodString, "many">;
     }, "strip", z.ZodTypeAny, {
         value: string[];
         type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+        operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
     }, {
         value: string[];
         type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+        operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
     }>, "many">;
     name: z.ZodOptional<z.ZodUnion<[z.ZodString, z.ZodNull]>>;
     active: z.ZodOptional<z.ZodBoolean>;
@@ -35368,6 +35379,7 @@ export declare const zCustomInboundFilterWritable: z.ZodObject<{
     conditions: {
         value: string[];
         type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+        operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
     }[];
     dataType: "error" | "all" | "log" | "metric" | "span";
     name?: string | null | undefined;
@@ -35376,6 +35388,7 @@ export declare const zCustomInboundFilterWritable: z.ZodObject<{
     conditions: {
         value: string[];
         type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+        operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
     }[];
     dataType: "error" | "all" | "log" | "metric" | "span";
     name?: string | null | undefined;
@@ -74968,13 +74981,16 @@ export declare const zListProjectCustomInboundFiltersResponse: z.ZodArray<z.ZodO
     dataType: z.ZodEnum<["all", "error", "log", "metric", "span"]>;
     conditions: z.ZodArray<z.ZodObject<{
         type: z.ZodEnum<["error_type", "error_message", "log_message", "metric_name", "release", "ip_address", "geo_country_code"]>;
+        operator: z.ZodOptional<z.ZodEnum<["glob", "equals", "starts_with", "contains", "ends_with", "does_not_start_with", "does_not_contain", "does_not_end_with", "gt", "gte", "lt", "lte"]>>;
         value: z.ZodArray<z.ZodString, "many">;
     }, "strip", z.ZodTypeAny, {
         value: string[];
         type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+        operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
     }, {
         value: string[];
         type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+        operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
     }>, "many">;
     dateCreated: z.ZodReadonly<z.ZodString>;
     dateUpdated: z.ZodReadonly<z.ZodString>;
@@ -74985,6 +75001,7 @@ export declare const zListProjectCustomInboundFiltersResponse: z.ZodArray<z.ZodO
     conditions: {
         value: string[];
         type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+        operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
     }[];
     dateCreated: string;
     dateUpdated: string;
@@ -74996,6 +75013,7 @@ export declare const zListProjectCustomInboundFiltersResponse: z.ZodArray<z.ZodO
     conditions: {
         value: string[];
         type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+        operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
     }[];
     dateCreated: string;
     dateUpdated: string;
@@ -75009,13 +75027,16 @@ export declare const zCreateProjectCustomInboundFilterData: z.ZodObject<{
         dataType: z.ZodEnum<["all", "error", "log", "metric", "span"]>;
         conditions: z.ZodArray<z.ZodObject<{
             type: z.ZodEnum<["error_type", "error_message", "log_message", "metric_name", "release", "ip_address", "geo_country_code"]>;
+            operator: z.ZodOptional<z.ZodEnum<["glob", "equals", "starts_with", "contains", "ends_with", "does_not_start_with", "does_not_contain", "does_not_end_with", "gt", "gte", "lt", "lte"]>>;
             value: z.ZodArray<z.ZodString, "many">;
         }, "strip", z.ZodTypeAny, {
             value: string[];
             type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+            operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
         }, {
             value: string[];
             type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+            operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
         }>, "many">;
         dateCreated: z.ZodReadonly<z.ZodString>;
         dateUpdated: z.ZodReadonly<z.ZodString>;
@@ -75026,6 +75047,7 @@ export declare const zCreateProjectCustomInboundFilterData: z.ZodObject<{
         conditions: {
             value: string[];
             type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+            operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
         }[];
         dateCreated: string;
         dateUpdated: string;
@@ -75037,6 +75059,7 @@ export declare const zCreateProjectCustomInboundFilterData: z.ZodObject<{
         conditions: {
             value: string[];
             type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+            operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
         }[];
         dateCreated: string;
         dateUpdated: string;
@@ -75061,6 +75084,7 @@ export declare const zCreateProjectCustomInboundFilterData: z.ZodObject<{
         conditions: {
             value: string[];
             type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+            operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
         }[];
         dateCreated: string;
         dateUpdated: string;
@@ -75079,6 +75103,7 @@ export declare const zCreateProjectCustomInboundFilterData: z.ZodObject<{
         conditions: {
             value: string[];
             type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+            operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
         }[];
         dateCreated: string;
         dateUpdated: string;
@@ -75097,13 +75122,16 @@ export declare const zCreateProjectCustomInboundFilterResponse: z.ZodObject<{
     dataType: z.ZodEnum<["all", "error", "log", "metric", "span"]>;
     conditions: z.ZodArray<z.ZodObject<{
         type: z.ZodEnum<["error_type", "error_message", "log_message", "metric_name", "release", "ip_address", "geo_country_code"]>;
+        operator: z.ZodOptional<z.ZodEnum<["glob", "equals", "starts_with", "contains", "ends_with", "does_not_start_with", "does_not_contain", "does_not_end_with", "gt", "gte", "lt", "lte"]>>;
         value: z.ZodArray<z.ZodString, "many">;
     }, "strip", z.ZodTypeAny, {
         value: string[];
         type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+        operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
     }, {
         value: string[];
         type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+        operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
     }>, "many">;
     dateCreated: z.ZodReadonly<z.ZodString>;
     dateUpdated: z.ZodReadonly<z.ZodString>;
@@ -75114,6 +75142,7 @@ export declare const zCreateProjectCustomInboundFilterResponse: z.ZodObject<{
     conditions: {
         value: string[];
         type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+        operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
     }[];
     dateCreated: string;
     dateUpdated: string;
@@ -75125,6 +75154,7 @@ export declare const zCreateProjectCustomInboundFilterResponse: z.ZodObject<{
     conditions: {
         value: string[];
         type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+        operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
     }[];
     dateCreated: string;
     dateUpdated: string;
@@ -75207,13 +75237,16 @@ export declare const zGetProjectCustomInboundFilterResponse: z.ZodObject<{
     dataType: z.ZodEnum<["all", "error", "log", "metric", "span"]>;
     conditions: z.ZodArray<z.ZodObject<{
         type: z.ZodEnum<["error_type", "error_message", "log_message", "metric_name", "release", "ip_address", "geo_country_code"]>;
+        operator: z.ZodOptional<z.ZodEnum<["glob", "equals", "starts_with", "contains", "ends_with", "does_not_start_with", "does_not_contain", "does_not_end_with", "gt", "gte", "lt", "lte"]>>;
         value: z.ZodArray<z.ZodString, "many">;
     }, "strip", z.ZodTypeAny, {
         value: string[];
         type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+        operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
     }, {
         value: string[];
         type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+        operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
     }>, "many">;
     dateCreated: z.ZodReadonly<z.ZodString>;
     dateUpdated: z.ZodReadonly<z.ZodString>;
@@ -75224,6 +75257,7 @@ export declare const zGetProjectCustomInboundFilterResponse: z.ZodObject<{
     conditions: {
         value: string[];
         type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+        operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
     }[];
     dateCreated: string;
     dateUpdated: string;
@@ -75235,6 +75269,7 @@ export declare const zGetProjectCustomInboundFilterResponse: z.ZodObject<{
     conditions: {
         value: string[];
         type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+        operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
     }[];
     dateCreated: string;
     dateUpdated: string;
@@ -75248,13 +75283,16 @@ export declare const zUpdateProjectCustomInboundFilterData: z.ZodObject<{
         dataType: z.ZodEnum<["all", "error", "log", "metric", "span"]>;
         conditions: z.ZodArray<z.ZodObject<{
             type: z.ZodEnum<["error_type", "error_message", "log_message", "metric_name", "release", "ip_address", "geo_country_code"]>;
+            operator: z.ZodOptional<z.ZodEnum<["glob", "equals", "starts_with", "contains", "ends_with", "does_not_start_with", "does_not_contain", "does_not_end_with", "gt", "gte", "lt", "lte"]>>;
             value: z.ZodArray<z.ZodString, "many">;
         }, "strip", z.ZodTypeAny, {
             value: string[];
             type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+            operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
         }, {
             value: string[];
             type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+            operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
         }>, "many">;
         dateCreated: z.ZodReadonly<z.ZodString>;
         dateUpdated: z.ZodReadonly<z.ZodString>;
@@ -75265,6 +75303,7 @@ export declare const zUpdateProjectCustomInboundFilterData: z.ZodObject<{
         conditions: {
             value: string[];
             type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+            operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
         }[];
         dateCreated: string;
         dateUpdated: string;
@@ -75276,6 +75315,7 @@ export declare const zUpdateProjectCustomInboundFilterData: z.ZodObject<{
         conditions: {
             value: string[];
             type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+            operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
         }[];
         dateCreated: string;
         dateUpdated: string;
@@ -75303,6 +75343,7 @@ export declare const zUpdateProjectCustomInboundFilterData: z.ZodObject<{
         conditions: {
             value: string[];
             type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+            operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
         }[];
         dateCreated: string;
         dateUpdated: string;
@@ -75322,6 +75363,7 @@ export declare const zUpdateProjectCustomInboundFilterData: z.ZodObject<{
         conditions: {
             value: string[];
             type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+            operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
         }[];
         dateCreated: string;
         dateUpdated: string;
@@ -75341,13 +75383,16 @@ export declare const zUpdateProjectCustomInboundFilterResponse: z.ZodObject<{
     dataType: z.ZodEnum<["all", "error", "log", "metric", "span"]>;
     conditions: z.ZodArray<z.ZodObject<{
         type: z.ZodEnum<["error_type", "error_message", "log_message", "metric_name", "release", "ip_address", "geo_country_code"]>;
+        operator: z.ZodOptional<z.ZodEnum<["glob", "equals", "starts_with", "contains", "ends_with", "does_not_start_with", "does_not_contain", "does_not_end_with", "gt", "gte", "lt", "lte"]>>;
         value: z.ZodArray<z.ZodString, "many">;
     }, "strip", z.ZodTypeAny, {
         value: string[];
         type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+        operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
     }, {
         value: string[];
         type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+        operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
     }>, "many">;
     dateCreated: z.ZodReadonly<z.ZodString>;
     dateUpdated: z.ZodReadonly<z.ZodString>;
@@ -75358,6 +75403,7 @@ export declare const zUpdateProjectCustomInboundFilterResponse: z.ZodObject<{
     conditions: {
         value: string[];
         type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+        operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
     }[];
     dateCreated: string;
     dateUpdated: string;
@@ -75369,6 +75415,7 @@ export declare const zUpdateProjectCustomInboundFilterResponse: z.ZodObject<{
     conditions: {
         value: string[];
         type: "error_type" | "error_message" | "log_message" | "metric_name" | "release" | "ip_address" | "geo_country_code";
+        operator?: "glob" | "equals" | "starts_with" | "contains" | "ends_with" | "does_not_start_with" | "does_not_contain" | "does_not_end_with" | "gt" | "gte" | "lt" | "lte" | undefined;
     }[];
     dateCreated: string;
     dateUpdated: string;
@@ -80256,22 +80303,22 @@ export declare const zGetProjectPreprodSizeAnalysisStatusCheckRulesResponse: z.Z
                 values: z.ZodArray<z.ZodString, "many">;
             }, "strip", z.ZodTypeAny, {
                 values: string[];
-                operator: "in" | "endsWith" | "startsWith" | "contains" | "equals" | "matches" | "notContains" | "notEndsWith" | "notEquals" | "notIn" | "notMatches" | "notStartsWith";
+                operator: "in" | "endsWith" | "startsWith" | "equals" | "contains" | "matches" | "notContains" | "notEndsWith" | "notEquals" | "notIn" | "notMatches" | "notStartsWith";
             }, {
                 values: string[];
-                operator: "in" | "endsWith" | "startsWith" | "contains" | "equals" | "matches" | "notContains" | "notEndsWith" | "notEquals" | "notIn" | "notMatches" | "notStartsWith";
+                operator: "in" | "endsWith" | "startsWith" | "equals" | "contains" | "matches" | "notContains" | "notEndsWith" | "notEquals" | "notIn" | "notMatches" | "notStartsWith";
             }>, "many">;
         }, "strip", z.ZodTypeAny, {
             key: "app_id" | "build_configuration_name" | "git_head_ref" | "platform_name";
             conditions: {
                 values: string[];
-                operator: "in" | "endsWith" | "startsWith" | "contains" | "equals" | "matches" | "notContains" | "notEndsWith" | "notEquals" | "notIn" | "notMatches" | "notStartsWith";
+                operator: "in" | "endsWith" | "startsWith" | "equals" | "contains" | "matches" | "notContains" | "notEndsWith" | "notEquals" | "notIn" | "notMatches" | "notStartsWith";
             }[];
         }, {
             key: "app_id" | "build_configuration_name" | "git_head_ref" | "platform_name";
             conditions: {
                 values: string[];
-                operator: "in" | "endsWith" | "startsWith" | "contains" | "equals" | "matches" | "notContains" | "notEndsWith" | "notEquals" | "notIn" | "notMatches" | "notStartsWith";
+                operator: "in" | "endsWith" | "startsWith" | "equals" | "contains" | "matches" | "notContains" | "notEndsWith" | "notEquals" | "notIn" | "notMatches" | "notStartsWith";
             }[];
         }>, "many">, z.ZodNull]>;
         artifactType: z.ZodEnum<["main_artifact", "watch_artifact", "android_dynamic_feature_artifact", "app_clip_artifact", "all_artifacts"]>;
@@ -80283,7 +80330,7 @@ export declare const zGetProjectPreprodSizeAnalysisStatusCheckRulesResponse: z.Z
             key: "app_id" | "build_configuration_name" | "git_head_ref" | "platform_name";
             conditions: {
                 values: string[];
-                operator: "in" | "endsWith" | "startsWith" | "contains" | "equals" | "matches" | "notContains" | "notEndsWith" | "notEquals" | "notIn" | "notMatches" | "notStartsWith";
+                operator: "in" | "endsWith" | "startsWith" | "equals" | "contains" | "matches" | "notContains" | "notEndsWith" | "notEquals" | "notIn" | "notMatches" | "notStartsWith";
             }[];
         }[] | null;
         artifactType: "main_artifact" | "watch_artifact" | "android_dynamic_feature_artifact" | "app_clip_artifact" | "all_artifacts";
@@ -80297,7 +80344,7 @@ export declare const zGetProjectPreprodSizeAnalysisStatusCheckRulesResponse: z.Z
             key: "app_id" | "build_configuration_name" | "git_head_ref" | "platform_name";
             conditions: {
                 values: string[];
-                operator: "in" | "endsWith" | "startsWith" | "contains" | "equals" | "matches" | "notContains" | "notEndsWith" | "notEquals" | "notIn" | "notMatches" | "notStartsWith";
+                operator: "in" | "endsWith" | "startsWith" | "equals" | "contains" | "matches" | "notContains" | "notEndsWith" | "notEquals" | "notIn" | "notMatches" | "notStartsWith";
             }[];
         }[] | null;
         artifactType: "main_artifact" | "watch_artifact" | "android_dynamic_feature_artifact" | "app_clip_artifact" | "all_artifacts";
@@ -80314,7 +80361,7 @@ export declare const zGetProjectPreprodSizeAnalysisStatusCheckRulesResponse: z.Z
             key: "app_id" | "build_configuration_name" | "git_head_ref" | "platform_name";
             conditions: {
                 values: string[];
-                operator: "in" | "endsWith" | "startsWith" | "contains" | "equals" | "matches" | "notContains" | "notEndsWith" | "notEquals" | "notIn" | "notMatches" | "notStartsWith";
+                operator: "in" | "endsWith" | "startsWith" | "equals" | "contains" | "matches" | "notContains" | "notEndsWith" | "notEquals" | "notIn" | "notMatches" | "notStartsWith";
             }[];
         }[] | null;
         artifactType: "main_artifact" | "watch_artifact" | "android_dynamic_feature_artifact" | "app_clip_artifact" | "all_artifacts";
@@ -80331,7 +80378,7 @@ export declare const zGetProjectPreprodSizeAnalysisStatusCheckRulesResponse: z.Z
             key: "app_id" | "build_configuration_name" | "git_head_ref" | "platform_name";
             conditions: {
                 values: string[];
-                operator: "in" | "endsWith" | "startsWith" | "contains" | "equals" | "matches" | "notContains" | "notEndsWith" | "notEquals" | "notIn" | "notMatches" | "notStartsWith";
+                operator: "in" | "endsWith" | "startsWith" | "equals" | "contains" | "matches" | "notContains" | "notEndsWith" | "notEquals" | "notIn" | "notMatches" | "notStartsWith";
             }[];
         }[] | null;
         artifactType: "main_artifact" | "watch_artifact" | "android_dynamic_feature_artifact" | "app_clip_artifact" | "all_artifacts";

package/dist/zod.js

@@ -1371,6 +1371,20 @@ var zCustomInboundFilter = z.object({
       "ip_address",
       "geo_country_code"
     ]),
+    operator: z.enum([
+      "glob",
+      "equals",
+      "starts_with",
+      "contains",
+      "ends_with",
+      "does_not_start_with",
+      "does_not_contain",
+      "does_not_end_with",
+      "gt",
+      "gte",
+      "lt",
+      "lte"
+    ]).optional(),
     value: z.array(z.string())
   })),
   dateCreated: z.string().datetime().readonly(),
@@ -1391,6 +1405,20 @@ var zCustomInboundFilterCondition = z.object({
     "ip_address",
     "geo_country_code"
   ]),
+  operator: z.enum([
+    "glob",
+    "equals",
+    "starts_with",
+    "contains",
+    "ends_with",
+    "does_not_start_with",
+    "does_not_contain",
+    "does_not_end_with",
+    "gt",
+    "gte",
+    "lt",
+    "lte"
+  ]).optional(),
   value: z.array(z.string())
 });
 var zDashboard = z.object({
@@ -13809,6 +13837,20 @@ var zCustomInboundFilterWritable = z.object({
       "ip_address",
       "geo_country_code"
     ]),
+    operator: z.enum([
+      "glob",
+      "equals",
+      "starts_with",
+      "contains",
+      "ends_with",
+      "does_not_start_with",
+      "does_not_contain",
+      "does_not_end_with",
+      "gt",
+      "gte",
+      "lt",
+      "lte"
+    ]).optional(),
     value: z.array(z.string())
   })),
   name: z.union([
@@ -27777,6 +27819,20 @@ var zListProjectCustomInboundFiltersResponse = z.array(z.object({
       "ip_address",
       "geo_country_code"
     ]),
+    operator: z.enum([
+      "glob",
+      "equals",
+      "starts_with",
+      "contains",
+      "ends_with",
+      "does_not_start_with",
+      "does_not_contain",
+      "does_not_end_with",
+      "gt",
+      "gte",
+      "lt",
+      "lte"
+    ]).optional(),
     value: z.array(z.string())
   })),
   dateCreated: z.string().datetime().readonly(),
@@ -27807,6 +27863,20 @@ var zCreateProjectCustomInboundFilterData = z.object({
         "ip_address",
         "geo_country_code"
       ]),
+      operator: z.enum([
+        "glob",
+        "equals",
+        "starts_with",
+        "contains",
+        "ends_with",
+        "does_not_start_with",
+        "does_not_contain",
+        "does_not_end_with",
+        "gt",
+        "gte",
+        "lt",
+        "lte"
+      ]).optional(),
       value: z.array(z.string())
     })),
     dateCreated: z.string().datetime().readonly(),
@@ -27842,6 +27912,20 @@ var zCreateProjectCustomInboundFilterResponse = z.object({
       "ip_address",
       "geo_country_code"
     ]),
+    operator: z.enum([
+      "glob",
+      "equals",
+      "starts_with",
+      "contains",
+      "ends_with",
+      "does_not_start_with",
+      "does_not_contain",
+      "does_not_end_with",
+      "gt",
+      "gte",
+      "lt",
+      "lte"
+    ]).optional(),
     value: z.array(z.string())
   })),
   dateCreated: z.string().datetime().readonly(),
@@ -27890,6 +27974,20 @@ var zGetProjectCustomInboundFilterResponse = z.object({
       "ip_address",
       "geo_country_code"
     ]),
+    operator: z.enum([
+      "glob",
+      "equals",
+      "starts_with",
+      "contains",
+      "ends_with",
+      "does_not_start_with",
+      "does_not_contain",
+      "does_not_end_with",
+      "gt",
+      "gte",
+      "lt",
+      "lte"
+    ]).optional(),
     value: z.array(z.string())
   })),
   dateCreated: z.string().datetime().readonly(),
@@ -27920,6 +28018,20 @@ var zUpdateProjectCustomInboundFilterData = z.object({
         "ip_address",
         "geo_country_code"
       ]),
+      operator: z.enum([
+        "glob",
+        "equals",
+        "starts_with",
+        "contains",
+        "ends_with",
+        "does_not_start_with",
+        "does_not_contain",
+        "does_not_end_with",
+        "gt",
+        "gte",
+        "lt",
+        "lte"
+      ]).optional(),
       value: z.array(z.string())
     })),
     dateCreated: z.string().datetime().readonly(),
@@ -27956,6 +28068,20 @@ var zUpdateProjectCustomInboundFilterResponse = z.object({
       "ip_address",
       "geo_country_code"
     ]),
+    operator: z.enum([
+      "glob",
+      "equals",
+      "starts_with",
+      "contains",
+      "ends_with",
+      "does_not_start_with",
+      "does_not_contain",
+      "does_not_end_with",
+      "gt",
+      "gte",
+      "lt",
+      "lte"
+    ]).optional(),
     value: z.array(z.string())
   })),
   dateCreated: z.string().datetime().readonly(),

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@sentry/api",
-  "version": "0.379.0",
+  "version": "0.380.0",
   "description": "Official auto-generated TypeScript client for the Sentry public REST API",
   "keywords": [
     "sentry",