@selvajs/compute 3.1.0-beta.5 → 3.1.0-beta.7

package/dist/types-C9YpTbr3.d.cts

@@ -1,121 +0,0 @@
-/**
- * Rhino model unit types supported by Rhino.Compute
- */
-type RhinoModelUnit = 'None' | 'Microns' | 'Millimeters' | 'Centimeters' | 'Meters' | 'Kilometers' | 'Microinches' | 'Mils' | 'Inches' | 'Feet' | 'Miles' | 'CustomUnits' | 'Angstroms' | 'Nanometers' | 'Decimeters' | 'Dekameters' | 'Hectometers' | 'Megameters' | 'Gigameters' | 'Yards' | 'PrinterPoints' | 'PrinterPicas' | 'NauticalMiles' | 'AstronomicalUnits' | 'LightYears' | 'Parsecs' | 'Unset';
-/**
- * Retry policy for transient errors (network, 502, 503, 504, optionally 429).
- *
- * Retries use exponential backoff with jitter, capped at `maxDelayMs`.
- * If the server returns `Retry-After`, that value is honored instead — even
- * above `maxDelayMs` (the server's stated window wins), up to an absolute
- * 60s safety cap.
- *
- * Duplicate-POST caveat: every compute request is a POST. A network error can
- * strike after the body was sent but before the response arrived — in that
- * window the server may already have executed the request, and a retry runs it
- * again. Compute solves are deterministic/idempotent so this is normally just
- * wasted work, but callers wrapping non-idempotent endpoints should keep
- * `attempts` at 0 (the default).
- */
-interface RetryPolicy {
-    /** Maximum number of retry attempts after the initial request (default: 0). */
-    attempts?: number;
-    /** Base delay in milliseconds for exponential backoff (default: 500). */
-    baseDelayMs?: number;
-    /** Upper bound for backoff delay (default: 30_000). */
-    maxDelayMs?: number;
-    /** Whether to retry on 429 responses (default: true — honors Retry-After). */
-    retryOn429?: boolean;
-}
-interface ComputeConfig {
-    /**
-     * The base URL of the Rhino Compute server (e.g., http://localhost:6500).
-     *
-     * This should point at the `rhino.compute` front (the reverse proxy), not a
-     * bare `compute.geometry` child process. `ComputeServerStats` relies on the
-     * proxy liveness root `/` and proxy-only endpoints like `/activechildren`,
-     * `/idlespan`, and the child-lifecycle controls; targeting a bare
-     * `compute.geometry` would make those 404 even though `/grasshopper` would
-     * still solve.
-     */
-    serverUrl: string;
-    /** Optional API key for authenticating with the server (RhinoComputeKey) */
-    apiKey?: string;
-    /** Optional Bearer token for authentication (e.g., when behind a proxy or API gateway) */
-    authToken?: string;
-    /**
-     * Extra headers sent on every solve / IO request to the compute server.
-     *
-     * Merged UNDER the transport's own headers (`X-Request-ID`, `Content-Type`,
-     * `Authorization`, `RhinoComputeKey`) so a caller can never accidentally
-     * override auth or the request id. Intended for routing/telemetry hints a
-     * reverse proxy or load balancer reads — e.g. a definition-affinity key so a
-     * pool routes repeat solves of one definition to the same VM (its per-VM
-     * definition/solve caches then hit). A single-node server ignores unknown
-     * headers, so this is inert until a router exists.
-     */
-    headers?: Record<string, string>;
-    /** Enable debug logging to the console */
-    debug?: boolean;
-    /** Suppress browser security warnings in the console */
-    suppressBrowserWarning?: boolean;
-    /** @deprecated Renamed to `suppressBrowserWarning`. */
-    suppressClientSideWarning?: boolean;
-    /**
-     * Per-**attempt** timeout in milliseconds. Set to `0` to disable (useful for
-     * long solves where any timeout is the wrong answer). Default: no timeout.
-     *
-     * This is NOT a total deadline: the timeout is re-armed for every retry
-     * attempt, so with `retry: { attempts: N }` the worst-case wall clock is
-     * `(N + 1) × timeoutMs` plus backoff sleeps between attempts. Callers that
-     * need a hard overall deadline should pass their own `signal` (e.g. from
-     * `AbortSignal.timeout(totalMs)`), which wins over any pending retry.
-     *
-     * Uses `AbortSignal.timeout` so the timer is not throttled when the tab is hidden.
-     */
-    timeoutMs?: number;
-    /**
-     * Retry policy for transient errors. Default: no retries.
-     */
-    retry?: RetryPolicy;
-    /**
-     * Optional caller-supplied AbortSignal. Composes with the internal timeout —
-     * whichever fires first wins. Lets callers cancel in-flight requests
-     * (e.g. on component unmount or when superseding a stale solve).
-     */
-    signal?: AbortSignal;
-    /**
-     * Optional callback invoked with the server's per-request `Server-Timing`
-     * breakdown when the response carries one (the `/grasshopper` solve endpoint
-     * emits `decode;dur=N, solve;dur=N, encode;dur=N` on every response).
-     *
-     * Fires once per request, before the parsed body is returned — on success
-     * and on the HTTP-500 partial-success path (a solve that completed with
-     * Grasshopper errors still carries real timings, often the slowest ones).
-     * The transport stays response-type-agnostic — this is a side
-     * channel for telemetry, it does not change what a call returns. Use it to
-     * feed a perf monitor or surface "solve took Nms" without server log access.
-     *
-     * `requestId` is the same id sent as the `X-Request-ID` header and used in
-     * this library's own debug logs — use it to correlate a timing entry with
-     * a specific request when multiple solves are in flight concurrently.
-     */
-    onServerTiming?: (timing: ServerTiming, requestId: string) => void;
-}
-/**
- * Parsed `Server-Timing` metrics from a Compute response. Durations are in
- * milliseconds. Any metric the server omits is `undefined`. `raw` is the
- * original header value, preserved so callers can read non-standard metrics.
- */
-interface ServerTiming {
-    /** Time the server spent decoding the request (deserialize + load definition). */
-    decode?: number;
-    /** Time spent actually solving the Grasshopper definition. */
-    solve?: number;
-    /** Time spent encoding the response (serialize geometry). */
-    encode?: number;
-    /** The raw `Server-Timing` header value, e.g. `decode;dur=3, solve;dur=120, encode;dur=8`. */
-    raw: string;
-}
-
-export type { ComputeConfig as C, RetryPolicy as R, ServerTiming as S, RhinoModelUnit as a };

package/dist/types-C9YpTbr3.d.ts

@@ -1,121 +0,0 @@
-/**
- * Rhino model unit types supported by Rhino.Compute
- */
-type RhinoModelUnit = 'None' | 'Microns' | 'Millimeters' | 'Centimeters' | 'Meters' | 'Kilometers' | 'Microinches' | 'Mils' | 'Inches' | 'Feet' | 'Miles' | 'CustomUnits' | 'Angstroms' | 'Nanometers' | 'Decimeters' | 'Dekameters' | 'Hectometers' | 'Megameters' | 'Gigameters' | 'Yards' | 'PrinterPoints' | 'PrinterPicas' | 'NauticalMiles' | 'AstronomicalUnits' | 'LightYears' | 'Parsecs' | 'Unset';
-/**
- * Retry policy for transient errors (network, 502, 503, 504, optionally 429).
- *
- * Retries use exponential backoff with jitter, capped at `maxDelayMs`.
- * If the server returns `Retry-After`, that value is honored instead — even
- * above `maxDelayMs` (the server's stated window wins), up to an absolute
- * 60s safety cap.
- *
- * Duplicate-POST caveat: every compute request is a POST. A network error can
- * strike after the body was sent but before the response arrived — in that
- * window the server may already have executed the request, and a retry runs it
- * again. Compute solves are deterministic/idempotent so this is normally just
- * wasted work, but callers wrapping non-idempotent endpoints should keep
- * `attempts` at 0 (the default).
- */
-interface RetryPolicy {
-    /** Maximum number of retry attempts after the initial request (default: 0). */
-    attempts?: number;
-    /** Base delay in milliseconds for exponential backoff (default: 500). */
-    baseDelayMs?: number;
-    /** Upper bound for backoff delay (default: 30_000). */
-    maxDelayMs?: number;
-    /** Whether to retry on 429 responses (default: true — honors Retry-After). */
-    retryOn429?: boolean;
-}
-interface ComputeConfig {
-    /**
-     * The base URL of the Rhino Compute server (e.g., http://localhost:6500).
-     *
-     * This should point at the `rhino.compute` front (the reverse proxy), not a
-     * bare `compute.geometry` child process. `ComputeServerStats` relies on the
-     * proxy liveness root `/` and proxy-only endpoints like `/activechildren`,
-     * `/idlespan`, and the child-lifecycle controls; targeting a bare
-     * `compute.geometry` would make those 404 even though `/grasshopper` would
-     * still solve.
-     */
-    serverUrl: string;
-    /** Optional API key for authenticating with the server (RhinoComputeKey) */
-    apiKey?: string;
-    /** Optional Bearer token for authentication (e.g., when behind a proxy or API gateway) */
-    authToken?: string;
-    /**
-     * Extra headers sent on every solve / IO request to the compute server.
-     *
-     * Merged UNDER the transport's own headers (`X-Request-ID`, `Content-Type`,
-     * `Authorization`, `RhinoComputeKey`) so a caller can never accidentally
-     * override auth or the request id. Intended for routing/telemetry hints a
-     * reverse proxy or load balancer reads — e.g. a definition-affinity key so a
-     * pool routes repeat solves of one definition to the same VM (its per-VM
-     * definition/solve caches then hit). A single-node server ignores unknown
-     * headers, so this is inert until a router exists.
-     */
-    headers?: Record<string, string>;
-    /** Enable debug logging to the console */
-    debug?: boolean;
-    /** Suppress browser security warnings in the console */
-    suppressBrowserWarning?: boolean;
-    /** @deprecated Renamed to `suppressBrowserWarning`. */
-    suppressClientSideWarning?: boolean;
-    /**
-     * Per-**attempt** timeout in milliseconds. Set to `0` to disable (useful for
-     * long solves where any timeout is the wrong answer). Default: no timeout.
-     *
-     * This is NOT a total deadline: the timeout is re-armed for every retry
-     * attempt, so with `retry: { attempts: N }` the worst-case wall clock is
-     * `(N + 1) × timeoutMs` plus backoff sleeps between attempts. Callers that
-     * need a hard overall deadline should pass their own `signal` (e.g. from
-     * `AbortSignal.timeout(totalMs)`), which wins over any pending retry.
-     *
-     * Uses `AbortSignal.timeout` so the timer is not throttled when the tab is hidden.
-     */
-    timeoutMs?: number;
-    /**
-     * Retry policy for transient errors. Default: no retries.
-     */
-    retry?: RetryPolicy;
-    /**
-     * Optional caller-supplied AbortSignal. Composes with the internal timeout —
-     * whichever fires first wins. Lets callers cancel in-flight requests
-     * (e.g. on component unmount or when superseding a stale solve).
-     */
-    signal?: AbortSignal;
-    /**
-     * Optional callback invoked with the server's per-request `Server-Timing`
-     * breakdown when the response carries one (the `/grasshopper` solve endpoint
-     * emits `decode;dur=N, solve;dur=N, encode;dur=N` on every response).
-     *
-     * Fires once per request, before the parsed body is returned — on success
-     * and on the HTTP-500 partial-success path (a solve that completed with
-     * Grasshopper errors still carries real timings, often the slowest ones).
-     * The transport stays response-type-agnostic — this is a side
-     * channel for telemetry, it does not change what a call returns. Use it to
-     * feed a perf monitor or surface "solve took Nms" without server log access.
-     *
-     * `requestId` is the same id sent as the `X-Request-ID` header and used in
-     * this library's own debug logs — use it to correlate a timing entry with
-     * a specific request when multiple solves are in flight concurrently.
-     */
-    onServerTiming?: (timing: ServerTiming, requestId: string) => void;
-}
-/**
- * Parsed `Server-Timing` metrics from a Compute response. Durations are in
- * milliseconds. Any metric the server omits is `undefined`. `raw` is the
- * original header value, preserved so callers can read non-standard metrics.
- */
-interface ServerTiming {
-    /** Time the server spent decoding the request (deserialize + load definition). */
-    decode?: number;
-    /** Time spent actually solving the Grasshopper definition. */
-    solve?: number;
-    /** Time spent encoding the response (serialize geometry). */
-    encode?: number;
-    /** The raw `Server-Timing` header value, e.g. `decode;dur=3, solve;dur=120, encode;dur=8`. */
-    raw: string;
-}
-
-export type { ComputeConfig as C, RetryPolicy as R, ServerTiming as S, RhinoModelUnit as a };

package/dist/visualization-C3YOGQTW.js

@@ -1,2 +0,0 @@
-import{A as j,B as R,C as I,D,E as B,F as G,G as L,H as P,I as u,J as F,K as b,L as N,M as V,a as e,b as r,c as t,d as o,e as a,f as s,g as p,h as i,i as n,j as l,k as m,l as y,m as f,n as d,o as C,p as x,q as h,r as E,s as M,t as _,u as c,v as A,w as g,x as O,y as S,z as T}from"./chunk-ORGJSKR4.js";import"./chunk-54O6BO24.js";export{g as BINARY_MESH_MAGIC,S as BINARY_MESH_VERSION,O as COMPRESSED_MESH_MAGIC,n as EDGE_USERDATA_KIND,I as FLAG_DELTA_ENCODED,j as FLAG_FLOAT32,D as FLAG_HAS_UVS,B as FLAG_HAS_VERTEX_COLORS,R as FLAG_UINT16_INDICES,T as MIN_SUPPORTED_VERSION,e as Materials,N as SCALE_FACTORS,h as TEXTURE_CACHE_MAX_ENTRIES,L as UV_FORMAT_FLOAT32,G as UV_FORMAT_UINT16,l as addEdges,o as applyOffset,M as clearTextureCache,a as computeCombinedBoundingBox,s as createCameraController,p as createGrid,d as createLabelLayer,x as createMeasureTool,f as createRenderPipeline,i as createViewGizmo,V as getThreeMeshesFromComputeResponse,c as initThree,m as isEdgeOverlay,_ as materialAppearanceForStyle,P as parseBinaryMeshBatch,t as parseColor,A as parseDisplayItems,u as parseMeshBatch,b as parseMeshBatchBlob,F as parseMeshBatchObject,y as removeEdges,E as setTextureAnisotropy,C as snapToVertex,r as updateScene};
-//# sourceMappingURL=visualization-C3YOGQTW.js.map

package/dist/visualization-CERJ6XDX.cjs

@@ -1,2 +0,0 @@
-"use strict";Object.defineProperty(exports, "__esModule", {value: true});var _chunkEZRBMUXTcjs = require('./chunk-EZRBMUXT.cjs');require('./chunk-GF6ZIJWX.cjs');exports.BINARY_MESH_MAGIC = _chunkEZRBMUXTcjs.w; exports.BINARY_MESH_VERSION = _chunkEZRBMUXTcjs.y; exports.COMPRESSED_MESH_MAGIC = _chunkEZRBMUXTcjs.x; exports.EDGE_USERDATA_KIND = _chunkEZRBMUXTcjs.i; exports.FLAG_DELTA_ENCODED = _chunkEZRBMUXTcjs.C; exports.FLAG_FLOAT32 = _chunkEZRBMUXTcjs.A; exports.FLAG_HAS_UVS = _chunkEZRBMUXTcjs.D; exports.FLAG_HAS_VERTEX_COLORS = _chunkEZRBMUXTcjs.E; exports.FLAG_UINT16_INDICES = _chunkEZRBMUXTcjs.B; exports.MIN_SUPPORTED_VERSION = _chunkEZRBMUXTcjs.z; exports.Materials = _chunkEZRBMUXTcjs.a; exports.SCALE_FACTORS = _chunkEZRBMUXTcjs.L; exports.TEXTURE_CACHE_MAX_ENTRIES = _chunkEZRBMUXTcjs.q; exports.UV_FORMAT_FLOAT32 = _chunkEZRBMUXTcjs.G; exports.UV_FORMAT_UINT16 = _chunkEZRBMUXTcjs.F; exports.addEdges = _chunkEZRBMUXTcjs.j; exports.applyOffset = _chunkEZRBMUXTcjs.d; exports.clearTextureCache = _chunkEZRBMUXTcjs.s; exports.computeCombinedBoundingBox = _chunkEZRBMUXTcjs.e; exports.createCameraController = _chunkEZRBMUXTcjs.f; exports.createGrid = _chunkEZRBMUXTcjs.g; exports.createLabelLayer = _chunkEZRBMUXTcjs.n; exports.createMeasureTool = _chunkEZRBMUXTcjs.p; exports.createRenderPipeline = _chunkEZRBMUXTcjs.m; exports.createViewGizmo = _chunkEZRBMUXTcjs.h; exports.getThreeMeshesFromComputeResponse = _chunkEZRBMUXTcjs.M; exports.initThree = _chunkEZRBMUXTcjs.u; exports.isEdgeOverlay = _chunkEZRBMUXTcjs.k; exports.materialAppearanceForStyle = _chunkEZRBMUXTcjs.t; exports.parseBinaryMeshBatch = _chunkEZRBMUXTcjs.H; exports.parseColor = _chunkEZRBMUXTcjs.c; exports.parseDisplayItems = _chunkEZRBMUXTcjs.v; exports.parseMeshBatch = _chunkEZRBMUXTcjs.I; exports.parseMeshBatchBlob = _chunkEZRBMUXTcjs.K; exports.parseMeshBatchObject = _chunkEZRBMUXTcjs.J; exports.removeEdges = _chunkEZRBMUXTcjs.l; exports.setTextureAnisotropy = _chunkEZRBMUXTcjs.r; exports.snapToVertex = _chunkEZRBMUXTcjs.o; exports.updateScene = _chunkEZRBMUXTcjs.b;
-//# sourceMappingURL=visualization-CERJ6XDX.cjs.map

package/dist/visualization-CERJ6XDX.cjs.map

@@ -1 +0,0 @@
-{"version":3,"sources":["/home/runner/work/selva-compute/selva-compute/dist/visualization-CERJ6XDX.cjs"],"names":[],"mappings":"AAAA,iIAA6S,gCAA6B,82DAAi4B","file":"/home/runner/work/selva-compute/selva-compute/dist/visualization-CERJ6XDX.cjs"}