@seamapi/types 1.765.0 → 1.767.0

package/dist/connect.cjs

@@ -149,6 +149,18 @@ var lock_capability_properties = zod.z.object({
           property_group_key: locks
           ---
           Indicates whether the door is open.
+          `),
+  auto_lock_enabled: zod.z.boolean().optional().describe(`
+          ---
+          property_group_key: locks
+          ---
+          Indicates whether automatic locking is enabled.
+          `),
+  auto_lock_delay_seconds: zod.z.number().optional().describe(`
+          ---
+          property_group_key: locks
+          ---
+          The delay in seconds before the lock automatically locks after being unlocked.
           `)
 });
 var hvac_mode_setting = zod.z.enum([
@@ -958,7 +970,10 @@ var device_metadata = zod.z.object({
       incomplete_keyboard_passcode: zod.z.boolean().describe(
         `Indicates whether a TTLock device supports an incomplete keyboard passcode.`
       ),
-      wifi: zod.z.boolean().describe(`Indicates whether a TTLock device supports Wi-Fi.`)
+      wifi: zod.z.boolean().describe(`Indicates whether a TTLock device supports Wi-Fi.`),
+      auto_lock_time_config: zod.z.boolean().describe(
+        `Indicates whether a TTLock device supports auto-lock time configuration.`
+      )
     }).describe(`Features for a TTLock device.`),
     has_gateway: zod.z.boolean().optional().describe(`Indicates whether a TTLock device has a gateway.`),
     wireless_keypads: zod.z.array(
@@ -1242,7 +1257,8 @@ var device_capability_flags = zod.z.object({
   can_program_thermostat_programs_as_same_each_day: zod.z.boolean(),
   can_simulate_hub_connection: zod.z.boolean(),
   can_simulate_hub_disconnection: zod.z.boolean(),
-  can_simulate_paid_subscription: zod.z.boolean()
+  can_simulate_paid_subscription: zod.z.boolean(),
+  can_configure_auto_lock: zod.z.boolean()
 }).partial();
 var battery_status = zod.z.enum(["critical", "low", "good", "full"]).describe(`Represents the current status of the battery charge level. Values are \`critical\`, which indicates an extremely low level, suggesting imminent shutdown or an urgent need for charging; \`low\`, which signifies that the battery is under the preferred threshold and should be charged soon; \`good\`, which denotes a satisfactory charge level, adequate for normal use without the immediate need for recharging; and \`full\`, which represents a battery that is fully charged, providing the maximum duration of usage.
           `);
@@ -4168,6 +4184,9 @@ var activate_climate_preset_action_attempt = zod.z.discriminatedUnion(
     common_failed_action_attempt.extend({ action_type, error }).describe("Activating a climate preset failed.")
   ]
 );
+var action_type2 = zod.z.literal("CONFIGURE_AUTO_LOCK").describe(
+  "Action attempt to track the status of configuring the auto-lock on a lock."
+);
 var error2 = zod.z.object({
   type: zod.z.string().describe("Type of the error."),
   message: zod.z.string().describe(
@@ -4175,17 +4194,37 @@ var error2 = zod.z.object({
   )
 }).describe("Error associated with the action.");
 var result2 = zod.z.object({}).describe("Result of the action.");
+var configure_auto_lock_action_attempt = zod.z.discriminatedUnion(
+  "status",
+  [
+    common_pending_action_attempt.extend({
+      action_type: action_type2
+    }).describe("Configuring the auto-lock is pending."),
+    common_succeeded_action_attempt.extend({
+      action_type: action_type2,
+      result: result2
+    }).describe("Configuring the auto-lock succeeded."),
+    common_failed_action_attempt.extend({ action_type: action_type2, error: error2 }).describe("Configuring the auto-lock failed.")
+  ]
+);
+var error3 = zod.z.object({
+  type: zod.z.string().describe("Type of the error."),
+  message: zod.z.string().describe(
+    "Detailed description of the error. Provides insights into the issue and potentially how to rectify it."
+  )
+}).describe("Error associated with the action.");
+var result3 = zod.z.object({}).describe("Result of the action.");
 var sync_access_codes_action_attempt = zod.z.discriminatedUnion("status", [
   common_pending_action_attempt.extend({
     action_type: zod.z.literal("SYNC_ACCESS_CODES").describe("Syncing access codes is pending.")
   }),
   common_succeeded_action_attempt.extend({
     action_type: zod.z.literal("SYNC_ACCESS_CODES").describe("Syncing access codes succeeded."),
-    result: result2
+    result: result3
   }),
   common_failed_action_attempt.extend({
     action_type: zod.z.literal("SYNC_ACCESS_CODES").describe("Syncing access codes failed."),
-    error: error2
+    error: error3
   })
 ]).describe("Action attempt to track the status of syncing access codes.");
 var create_access_code_action_attempt = zod.z.discriminatedUnion("status", [
@@ -4200,7 +4239,7 @@ var create_access_code_action_attempt = zod.z.discriminatedUnion("status", [
   }),
   common_failed_action_attempt.extend({
     action_type: zod.z.literal("CREATE_ACCESS_CODE").describe("Creating an access code failed."),
-    error: error2
+    error: error3
   })
 ]).describe("Action attempt to track the status of creating an access code.");
 var delete_access_code_action_attempt = zod.z.discriminatedUnion("status", [
@@ -4209,11 +4248,11 @@ var delete_access_code_action_attempt = zod.z.discriminatedUnion("status", [
   }),
   common_succeeded_action_attempt.extend({
     action_type: zod.z.literal("DELETE_ACCESS_CODE").describe("Deleting an access code succeeded."),
-    result: result2
+    result: result3
   }),
   common_failed_action_attempt.extend({
     action_type: zod.z.literal("DELETE_ACCESS_CODE").describe("Deleting an access code failed."),
-    error: error2
+    error: error3
   })
 ]).describe("Action attempt to track the status of deleting an access code.");
 var update_access_code_action_attempt = zod.z.discriminatedUnion("status", [
@@ -4228,7 +4267,7 @@ var update_access_code_action_attempt = zod.z.discriminatedUnion("status", [
   }),
   common_failed_action_attempt.extend({
     action_type: zod.z.literal("UPDATE_ACCESS_CODE").describe("Updating an access code failed."),
-    error: error2
+    error: error3
   })
 ]).describe("Action attempt to track the status of updating an access code.");
 var create_noise_threshold_action_attempt = zod.z.discriminatedUnion("status", [
@@ -4243,7 +4282,7 @@ var create_noise_threshold_action_attempt = zod.z.discriminatedUnion("status", [
   }),
   common_failed_action_attempt.extend({
     action_type: zod.z.literal("CREATE_NOISE_THRESHOLD").describe("Creating a noise threshold failed."),
-    error: error2
+    error: error3
   })
 ]).describe("Action attempt to track the status of creating a noise threshold.");
 var delete_noise_threshold_action_attempt = zod.z.discriminatedUnion("status", [
@@ -4252,11 +4291,11 @@ var delete_noise_threshold_action_attempt = zod.z.discriminatedUnion("status", [
   }),
   common_succeeded_action_attempt.extend({
     action_type: zod.z.literal("DELETE_NOISE_THRESHOLD").describe("Deleting a noise threshold succeeded."),
-    result: result2
+    result: result3
   }),
   common_failed_action_attempt.extend({
     action_type: zod.z.literal("DELETE_NOISE_THRESHOLD").describe("Deleting a noise threshold failed."),
-    error: error2
+    error: error3
   })
 ]).describe("Action attempt to track the status of deleting a noise threshold.");
 var update_noise_threshold_action_attempt = zod.z.discriminatedUnion("status", [
@@ -4271,7 +4310,7 @@ var update_noise_threshold_action_attempt = zod.z.discriminatedUnion("status", [
   }),
   common_failed_action_attempt.extend({
     action_type: zod.z.literal("UPDATE_NOISE_THRESHOLD").describe("Updating a noise threshold failed."),
-    error: error2
+    error: error3
   })
 ]).describe("Action attempt to track the status of updating a noise threshold.");
 var deprecated_action_attempts = [
@@ -4283,7 +4322,7 @@ var deprecated_action_attempts = [
   ...delete_noise_threshold_action_attempt.options,
   ...update_noise_threshold_action_attempt.options
 ];
-var action_type2 = zod.z.literal("ENCODE_CREDENTIAL").describe(
+var action_type3 = zod.z.literal("ENCODE_CREDENTIAL").describe(
   "Action attempt to track the status of encoding credential data from the physical encoder onto a card."
 );
 var no_credential_on_encoder_error = zod.z.object({
@@ -4316,104 +4355,104 @@ var encoder_not_online_error = zod.z.object({
     "Detailed description of the error. Provides insights into the issue and potentially how to rectify it."
   )
 }).describe("Error to indicate that the encoder is not online.");
-var error3 = zod.z.union([
+var error4 = zod.z.union([
   ...common_action_attempt_errors,
   no_credential_on_encoder_error,
   incompatible_card_format_error,
   credential_cannot_be_reissued,
   encoder_not_online_error
 ]);
-var result3 = acs_credential.or(unmanaged_acs_credential).describe(
+var result4 = acs_credential.or(unmanaged_acs_credential).describe(
   "Result of an encoding attempt. If the attempt was successful, includes the credential data that was encoded onto the card."
 );
 var encode_credential_action_attempt = zod.z.discriminatedUnion("status", [
   common_pending_action_attempt.extend({
-    action_type: action_type2
+    action_type: action_type3
   }).describe(
     "Encoding credential data from the physical encoder onto a card is pending."
   ),
   common_succeeded_action_attempt.extend({
-    action_type: action_type2,
-    result: result3
+    action_type: action_type3,
+    result: result4
   }).describe(
     "Encoding credential data from the physical encoder onto a card succeeded."
   ),
-  common_failed_action_attempt.extend({ action_type: action_type2, error: error3 }).describe(
+  common_failed_action_attempt.extend({ action_type: action_type3, error: error4 }).describe(
     "Encoding credential data from the physical encoder onto a card failed."
   )
 ]);
-var action_type3 = zod.z.literal("LOCK_DOOR").describe("Action attempt to track the status of locking a door.");
-var error4 = zod.z.object({
+var action_type4 = zod.z.literal("LOCK_DOOR").describe("Action attempt to track the status of locking a door.");
+var error5 = zod.z.object({
   type: zod.z.string().describe("Type of the error."),
   message: zod.z.string().describe(
     "Detailed description of the error. Provides insights into the issue and potentially how to rectify it."
   )
 }).describe("Error associated with the action.");
-var result4 = zod.z.object({
+var result5 = zod.z.object({
   was_confirmed_by_device: zod.z.boolean().optional().describe(
     "Indicates whether the device confirmed that the lock action occurred."
   )
 }).describe("Result of the action.");
 var lock_door_action_attempt = zod.z.discriminatedUnion("status", [
   common_pending_action_attempt.extend({
-    action_type: action_type3
+    action_type: action_type4
   }).describe("Locking a door is pending."),
   common_succeeded_action_attempt.extend({
-    action_type: action_type3,
-    result: result4
+    action_type: action_type4,
+    result: result5
   }).describe("Locking a door succeeded."),
-  common_failed_action_attempt.extend({ action_type: action_type3, error: error4 }).describe("Locking a door failed.")
+  common_failed_action_attempt.extend({ action_type: action_type4, error: error5 }).describe("Locking a door failed.")
 ]);
-var action_type4 = zod.z.literal("PUSH_THERMOSTAT_PROGRAMS").describe(
+var action_type5 = zod.z.literal("PUSH_THERMOSTAT_PROGRAMS").describe(
   "Action attempt to track the status of pushing thermostat programs."
 );
-var error5 = zod.z.object({
+var error6 = zod.z.object({
   type: zod.z.string().describe("Type of the error."),
   message: zod.z.string().describe(
     "Detailed description of the error. Provides insights into the issue and potentially how to rectify it."
   )
 }).describe("Error associated with the action.");
-var result5 = zod.z.object({}).describe("Result of the action.");
+var result6 = zod.z.object({}).describe("Result of the action.");
 var push_thermostat_programs_action_attempt = zod.z.discriminatedUnion(
   "status",
   [
     common_pending_action_attempt.extend({
-      action_type: action_type4
+      action_type: action_type5
     }).describe("Pushing thermostat weekly programs is pending."),
     common_succeeded_action_attempt.extend({
-      action_type: action_type4,
-      result: result5
+      action_type: action_type5,
+      result: result6
     }).describe("Pushing thermostat weekly programs succeeded."),
-    common_failed_action_attempt.extend({ action_type: action_type4, error: error5 }).describe("Pushing thermostat weekly programs failed.")
+    common_failed_action_attempt.extend({ action_type: action_type5, error: error6 }).describe("Pushing thermostat weekly programs failed.")
   ]
 );
-var action_type5 = zod.z.literal("RESET_SANDBOX_WORKSPACE").describe(
+var action_type6 = zod.z.literal("RESET_SANDBOX_WORKSPACE").describe(
   "Action attempt to track the status of resetting a sandbox workspace."
 );
-var error6 = zod.z.object({
+var error7 = zod.z.object({
   type: zod.z.string().describe("Type of the error."),
   message: zod.z.string().describe(
     "Detailed description of the error. Provides insights into the issue and potentially how to rectify it."
   )
 }).describe("Error associated with the action.");
-var result6 = zod.z.object({}).describe("Result of the action.");
+var result7 = zod.z.object({}).describe("Result of the action.");
 var reset_sandbox_workspace_action_attempt = zod.z.discriminatedUnion(
   "status",
   [
     common_pending_action_attempt.extend({
-      action_type: action_type5
+      action_type: action_type6
     }).describe("Resetting a sandbox workspace is pending."),
     common_succeeded_action_attempt.extend({
-      action_type: action_type5,
-      result: result6
+      action_type: action_type6,
+      result: result7
     }).describe("Resetting a sandbox workspace succeeded."),
     common_failed_action_attempt.extend({
-      action_type: action_type5,
-      error: error6
+      action_type: action_type6,
+      error: error7
     }).describe("Resetting a sandbox workspace failed.")
   ]
 );
-var action_type6 = zod.z.literal("SCAN_CREDENTIAL").describe("Action attempt to track the status of scanning a credential.");
+var action_type7 = zod.z.literal("SCAN_CREDENTIAL").describe("Action attempt to track the status of scanning a credential.");
 var no_credential_on_encoder_error2 = zod.z.object({
   type: zod.z.literal("no_credential_on_encoder").describe(
     "Error type to indicate that there is no credential on the encoder."
@@ -4428,7 +4467,7 @@ var encoder_not_online_error2 = zod.z.object({
     "Detailed description of the error. Provides insights into the issue and potentially how to rectify it."
   )
 }).describe("Error to indicate that the encoder is not online.");
-var error7 = zod.z.union([
+var error8 = zod.z.union([
   ...common_action_attempt_errors,
   no_credential_on_encoder_error2,
   encoder_not_online_error2
@@ -4443,7 +4482,7 @@ var warning = zod.z.object({
   )
 }).describe("Warning related to scanning a credential.");
 var acs_credential_on_seam = acs_credential.or(unmanaged_acs_credential);
-var result7 = zod.z.object({
+var result8 = zod.z.object({
   acs_credential_on_encoder: acs_credential_on_encoder.nullable().describe("Snapshot of credential data read from the physical encoder."),
   acs_credential_on_seam: acs_credential_on_seam.nullable().describe(
     "Corresponding credential data as stored on Seam and the access system."
@@ -4456,124 +4495,124 @@ var result7 = zod.z.object({
 );
 var scan_credential_action_attempt = zod.z.discriminatedUnion("status", [
   common_pending_action_attempt.extend({
-    action_type: action_type6
+    action_type: action_type7
   }).describe("Reading credential data from the physical encoder is pending."),
   common_succeeded_action_attempt.extend({
-    action_type: action_type6,
-    result: result7
+    action_type: action_type7,
+    result: result8
   }).describe("Reading credential data from physical encoder succeeded."),
-  common_failed_action_attempt.extend({ action_type: action_type6, error: error7 }).describe("Reading credential data from physical encoder failed.")
+  common_failed_action_attempt.extend({ action_type: action_type7, error: error8 }).describe("Reading credential data from physical encoder failed.")
 ]);
-var action_type7 = zod.z.literal("SET_FAN_MODE").describe(
+var action_type8 = zod.z.literal("SET_FAN_MODE").describe(
   "Action attempt to track the status of setting the fan mode on a thermostat."
 );
-var error8 = zod.z.object({
+var error9 = zod.z.object({
   type: zod.z.string().describe("Type of the error."),
   message: zod.z.string().describe(
     "Detailed description of the error. Provides insights into the issue and potentially how to rectify it."
   )
 }).describe("Error associated with the action.");
-var result8 = zod.z.object({}).describe("Result of the action.");
+var result9 = zod.z.object({}).describe("Result of the action.");
 var set_fan_mode_action_attempt = zod.z.discriminatedUnion("status", [
   common_pending_action_attempt.extend({
-    action_type: action_type7
+    action_type: action_type8
   }).describe("Setting the fan mode is pending."),
   common_succeeded_action_attempt.extend({
-    action_type: action_type7,
-    result: result8
+    action_type: action_type8,
+    result: result9
   }).describe("Setting the fan mode succeeded."),
-  common_failed_action_attempt.extend({ action_type: action_type7, error: error8 }).describe("Setting the fan mode failed.")
+  common_failed_action_attempt.extend({ action_type: action_type8, error: error9 }).describe("Setting the fan mode failed.")
 ]);
-var action_type8 = zod.z.literal("SET_HVAC_MODE").describe(
+var action_type9 = zod.z.literal("SET_HVAC_MODE").describe(
   "Action attempt to track the status of setting the HVAC mode on a thermostat."
 );
-var error9 = zod.z.object({
+var error10 = zod.z.object({
   type: zod.z.string().describe("Type of the error."),
   message: zod.z.string().describe(
     "Detailed description of the error. Provides insights into the issue and potentially how to rectify it."
   )
 }).describe("Error associated with the action.");
-var result9 = zod.z.object({}).describe("Result of the action.");
+var result10 = zod.z.object({}).describe("Result of the action.");
 var set_hvac_mode_action_attempt = zod.z.discriminatedUnion("status", [
   common_pending_action_attempt.extend({
-    action_type: action_type8
+    action_type: action_type9
   }).describe("Setting the HVAC mode is pending."),
   common_succeeded_action_attempt.extend({
-    action_type: action_type8,
-    result: result9
+    action_type: action_type9,
+    result: result10
   }).describe("Setting the HVAC mode succeeded."),
-  common_failed_action_attempt.extend({ action_type: action_type8, error: error9 }).describe("Setting the HVAC mode failed.")
+  common_failed_action_attempt.extend({ action_type: action_type9, error: error10 }).describe("Setting the HVAC mode failed.")
 ]);
-var action_type9 = zod.z.literal("SIMULATE_KEYPAD_CODE_ENTRY").describe(
+var action_type10 = zod.z.literal("SIMULATE_KEYPAD_CODE_ENTRY").describe(
   "Action attempt to track the status of simulating a keypad code entry."
 );
-var error10 = zod.z.object({
+var error11 = zod.z.object({
   type: zod.z.string().describe("Type of the error."),
   message: zod.z.string().describe(
     "Detailed description of the error. Provides insights into the issue and potentially how to rectify it."
   )
 }).describe("Error associated with the action.");
-var result10 = zod.z.object({}).describe("Result of the action.");
+var result11 = zod.z.object({}).describe("Result of the action.");
 var simulate_keypad_code_entry_action_attempt = zod.z.discriminatedUnion(
   "status",
   [
     common_pending_action_attempt.extend({
-      action_type: action_type9
+      action_type: action_type10
     }).describe("Simulating a keypad code entry is pending."),
     common_succeeded_action_attempt.extend({
-      action_type: action_type9,
-      result: result10
+      action_type: action_type10,
+      result: result11
     }).describe("Simulating a keypad code entry succeeded."),
     common_failed_action_attempt.extend({
-      action_type: action_type9,
-      error: error10
+      action_type: action_type10,
+      error: error11
     }).describe("Simulating a keypad code entry failed.")
   ]
 );
-var action_type10 = zod.z.literal("SIMULATE_MANUAL_LOCK_VIA_KEYPAD").describe(
+var action_type11 = zod.z.literal("SIMULATE_MANUAL_LOCK_VIA_KEYPAD").describe(
   "Action attempt to track the status of simulating a manual lock action using a keypad."
 );
-var error11 = zod.z.object({
+var error12 = zod.z.object({
   type: zod.z.string().describe("Type of the error."),
   message: zod.z.string().describe(
     "Detailed description of the error. Provides insights into the issue and potentially how to rectify it."
   )
 }).describe("Error associated with the action.");
-var result11 = zod.z.object({}).describe("Result of the action.");
+var result12 = zod.z.object({}).describe("Result of the action.");
 var simulate_manual_lock_via_keypad_action_attempt = zod.z.discriminatedUnion("status", [
   common_pending_action_attempt.extend({
-    action_type: action_type10
+    action_type: action_type11
   }).describe("Simulating a manual lock action using a keypad is pending."),
   common_succeeded_action_attempt.extend({
-    action_type: action_type10,
-    result: result11
+    action_type: action_type11,
+    result: result12
   }).describe("Simulating a manual lock action using a keypad succeeded."),
   common_failed_action_attempt.extend({
-    action_type: action_type10,
-    error: error11
+    action_type: action_type11,
+    error: error12
   }).describe("Simulating a manual lock action using a keypad failed.")
 ]);
-var action_type11 = zod.z.literal("UNLOCK_DOOR").describe("Action attempt to track the status of unlocking a door.");
-var error12 = zod.z.object({
+var action_type12 = zod.z.literal("UNLOCK_DOOR").describe("Action attempt to track the status of unlocking a door.");
+var error13 = zod.z.object({
   type: zod.z.string().describe("Type of the error."),
   message: zod.z.string().describe(
     "Detailed description of the error. Provides insights into the issue and potentially how to rectify it."
   )
 }).describe("Error associated with the action.");
-var result12 = zod.z.object({
+var result13 = zod.z.object({
   was_confirmed_by_device: zod.z.boolean().optional().describe(
     "Indicates whether the device confirmed that the unlock action occurred."
   )
 }).describe("Result of the action.");
 var unlock_door_action_attempt = zod.z.discriminatedUnion("status", [
   common_pending_action_attempt.extend({
-    action_type: action_type11
+    action_type: action_type12
   }).describe("Unlocking a door is pending."),
   common_succeeded_action_attempt.extend({
-    action_type: action_type11,
-    result: result12
+    action_type: action_type12,
+    result: result13
   }).describe("Unlocking a door succeeded."),
-  common_failed_action_attempt.extend({ action_type: action_type11, error: error12 }).describe("Unlocking a door failed.")
+  common_failed_action_attempt.extend({ action_type: action_type12, error: error13 }).describe("Unlocking a door failed.")
 ]);
 
 // src/lib/seam/connect/models/action-attempts/action-attempt.ts
@@ -4589,6 +4628,7 @@ var action_attempt = zod.z.union([
   ...simulate_keypad_code_entry_action_attempt.options,
   ...simulate_manual_lock_via_keypad_action_attempt.options,
   ...push_thermostat_programs_action_attempt.options,
+  ...configure_auto_lock_action_attempt.options,
   ...deprecated_action_attempts
 ]).describe(`
   ---
@@ -14349,6 +14389,111 @@ var openapi_default = {
             ],
             type: "object"
           },
+          {
+            description: "Configuring the auto-lock is pending.",
+            properties: {
+              action_attempt_id: {
+                description: "ID of the action attempt.",
+                format: "uuid",
+                type: "string"
+              },
+              action_type: {
+                description: "Action attempt to track the status of configuring the auto-lock on a lock.",
+                enum: ["CONFIGURE_AUTO_LOCK"],
+                type: "string"
+              },
+              error: {
+                description: "Errors associated with the action attempt. Null for pending action attempts.",
+                nullable: true
+              },
+              result: {
+                description: "Result of the action attempt. Null for pending action attempts.",
+                nullable: true
+              },
+              status: { enum: ["pending"], type: "string" }
+            },
+            required: [
+              "action_attempt_id",
+              "status",
+              "result",
+              "error",
+              "action_type"
+            ],
+            type: "object"
+          },
+          {
+            description: "Configuring the auto-lock succeeded.",
+            properties: {
+              action_attempt_id: {
+                description: "ID of the action attempt.",
+                format: "uuid",
+                type: "string"
+              },
+              action_type: {
+                description: "Action attempt to track the status of configuring the auto-lock on a lock.",
+                enum: ["CONFIGURE_AUTO_LOCK"],
+                type: "string"
+              },
+              error: {
+                description: "Errors associated with the action attempt. Null for successful action attempts.",
+                nullable: true
+              },
+              result: {
+                description: "Result of the action.",
+                properties: {},
+                type: "object"
+              },
+              status: { enum: ["success"], type: "string" }
+            },
+            required: [
+              "action_attempt_id",
+              "status",
+              "error",
+              "action_type",
+              "result"
+            ],
+            type: "object"
+          },
+          {
+            description: "Configuring the auto-lock failed.",
+            properties: {
+              action_attempt_id: {
+                description: "ID of the action attempt.",
+                format: "uuid",
+                type: "string"
+              },
+              action_type: {
+                description: "Action attempt to track the status of configuring the auto-lock on a lock.",
+                enum: ["CONFIGURE_AUTO_LOCK"],
+                type: "string"
+              },
+              error: {
+                description: "Error associated with the action.",
+                properties: {
+                  message: {
+                    description: "Detailed description of the error. Provides insights into the issue and potentially how to rectify it.",
+                    type: "string"
+                  },
+                  type: { description: "Type of the error.", type: "string" }
+                },
+                required: ["type", "message"],
+                type: "object"
+              },
+              result: {
+                description: "Result of the action attempt. Null for failed action attempts.",
+                nullable: true
+              },
+              status: { enum: ["error"], type: "string" }
+            },
+            required: [
+              "action_attempt_id",
+              "status",
+              "result",
+              "action_type",
+              "error"
+            ],
+            type: "object"
+          },
           {
             properties: {
               action_attempt_id: {
@@ -16109,6 +16254,7 @@ var openapi_default = {
       device: {
         description: "Represents a [device](https://docs.seam.co/latest/core-concepts/devices) that has been connected to Seam.",
         properties: {
+          can_configure_auto_lock: { type: "boolean" },
           can_hvac_cool: { type: "boolean" },
           can_hvac_heat: { type: "boolean" },
           can_hvac_heat_cool: { type: "boolean" },
@@ -18097,6 +18243,10 @@ var openapi_default = {
                           features: {
                             description: "Features for a TTLock device.",
                             properties: {
+                              auto_lock_time_config: {
+                                description: "Indicates whether a TTLock device supports auto-lock time configuration.",
+                                type: "boolean"
+                              },
                               incomplete_keyboard_passcode: {
                                 description: "Indicates whether a TTLock device supports an incomplete keyboard passcode.",
                                 type: "boolean"
@@ -18128,7 +18278,8 @@ var openapi_default = {
                               "unlock_via_gateway",
                               "lock_command",
                               "incomplete_keyboard_passcode",
-                              "wifi"
+                              "wifi",
+                              "auto_lock_time_config"
                             ],
                             type: "object"
                           },
@@ -18294,6 +18445,17 @@ var openapi_default = {
                         type: "array",
                         "x-undocumented": "Marked as experimental."
                       },
+                      auto_lock_delay_seconds: {
+                        description: "The delay in seconds before the lock automatically locks after being unlocked.",
+                        format: "float",
+                        type: "number",
+                        "x-property-group-key": "locks"
+                      },
+                      auto_lock_enabled: {
+                        description: "Indicates whether automatic locking is enabled.",
+                        type: "boolean",
+                        "x-property-group-key": "locks"
+                      },
                       code_constraints: {
                         description: "Constraints on access codes for the device. Seam represents each constraint as an object with a `constraint_type` property. Depending on the constraint type, there may also be additional properties. Note that some constraints are manufacturer- or device-specific.",
                         items: {
@@ -19739,6 +19901,7 @@ var openapi_default = {
       },
       device_provider: {
         properties: {
+          can_configure_auto_lock: { type: "boolean" },
           can_hvac_cool: { type: "boolean" },
           can_hvac_heat: { type: "boolean" },
           can_hvac_heat_cool: { type: "boolean" },
@@ -32510,6 +32673,7 @@ var openapi_default = {
       unmanaged_device: {
         description: "Represents an [unmanaged device](https://docs.seam.co/latest/core-concepts/devices/managed-and-unmanaged-devices). An unmanaged device has a limited set of visible properties and a subset of supported events. You cannot control an unmanaged device. Any [access codes](https://docs.seam.co/latest/capability-guides/smart-locks/access-codes/migrating-existing-access-codes) on an unmanaged device are unmanaged. To control an unmanaged device with Seam, [convert it to a managed device](https://docs.seam.co/latest/core-concepts/devices/managed-and-unmanaged-devices#convert-an-unmanaged-device-to-managed).",
         properties: {
+          can_configure_auto_lock: { type: "boolean" },
           can_hvac_cool: { type: "boolean" },
           can_hvac_heat: { type: "boolean" },
           can_hvac_heat_cool: { type: "boolean" },
@@ -51504,6 +51668,7 @@ var openapi_default = {
                         manage: {
                           exclude: false,
                           exclude_reservation_management: false,
+                          exclude_reservation_technical_details: false,
                           exclude_staff_management: false
                         },
                         manage_devices: { exclude: false },
@@ -51647,6 +51812,11 @@ var openapi_default = {
                                 description: "Indicates whether the customer can manage reservations for their properties.",
                                 type: "boolean"
                               },
+                              exclude_reservation_technical_details: {
+                                default: false,
+                                description: "Indicates whether to exclude technical details from reservation views.",
+                                type: "boolean"
+                              },
                               exclude_staff_management: {
                                 default: false,
                                 description: "Indicates whether the customer can manage staff for their properties.",
@@ -54307,7 +54477,8 @@ var openapi_default = {
                   "can_program_thermostat_programs_as_same_each_day",
                   "can_simulate_hub_connection",
                   "can_simulate_hub_disconnection",
-                  "can_simulate_paid_subscription"
+                  "can_simulate_paid_subscription",
+                  "can_configure_auto_lock"
                 ],
                 type: "string"
               },
@@ -54339,7 +54510,8 @@ var openapi_default = {
                   "can_program_thermostat_programs_as_same_each_day",
                   "can_simulate_hub_connection",
                   "can_simulate_hub_disconnection",
-                  "can_simulate_paid_subscription"
+                  "can_simulate_paid_subscription",
+                  "can_configure_auto_lock"
                 ],
                 type: "string"
               },
@@ -54623,7 +54795,8 @@ var openapi_default = {
                         "can_program_thermostat_programs_as_same_each_day",
                         "can_simulate_hub_connection",
                         "can_simulate_hub_disconnection",
-                        "can_simulate_paid_subscription"
+                        "can_simulate_paid_subscription",
+                        "can_configure_auto_lock"
                       ],
                       type: "string"
                     },
@@ -54651,7 +54824,8 @@ var openapi_default = {
                         "can_program_thermostat_programs_as_same_each_day",
                         "can_simulate_hub_connection",
                         "can_simulate_hub_disconnection",
-                        "can_simulate_paid_subscription"
+                        "can_simulate_paid_subscription",
+                        "can_configure_auto_lock"
                       ],
                       type: "string"
                     },
@@ -56138,7 +56312,8 @@ var openapi_default = {
                   "can_program_thermostat_programs_as_same_each_day",
                   "can_simulate_hub_connection",
                   "can_simulate_hub_disconnection",
-                  "can_simulate_paid_subscription"
+                  "can_simulate_paid_subscription",
+                  "can_configure_auto_lock"
                 ],
                 type: "string"
               },
@@ -56170,7 +56345,8 @@ var openapi_default = {
                   "can_program_thermostat_programs_as_same_each_day",
                   "can_simulate_hub_connection",
                   "can_simulate_hub_disconnection",
-                  "can_simulate_paid_subscription"
+                  "can_simulate_paid_subscription",
+                  "can_configure_auto_lock"
                 ],
                 type: "string"
               },
@@ -56463,7 +56639,8 @@ var openapi_default = {
                         "can_program_thermostat_programs_as_same_each_day",
                         "can_simulate_hub_connection",
                         "can_simulate_hub_disconnection",
-                        "can_simulate_paid_subscription"
+                        "can_simulate_paid_subscription",
+                        "can_configure_auto_lock"
                       ],
                       type: "string"
                     },
@@ -56491,7 +56668,8 @@ var openapi_default = {
                         "can_program_thermostat_programs_as_same_each_day",
                         "can_simulate_hub_connection",
                         "can_simulate_hub_disconnection",
-                        "can_simulate_paid_subscription"
+                        "can_simulate_paid_subscription",
+                        "can_configure_auto_lock"
                       ],
                       type: "string"
                     },
@@ -58285,6 +58463,75 @@ var openapi_default = {
         "x-title": "List Instant Keys"
       }
     },
+    "/locks/configure_auto_lock": {
+      post: {
+        description: "Configures the auto-lock setting for a specified [lock](https://docs.seam.co/latest/capability-guides/smart-locks).",
+        operationId: "locksConfigureAutoLockPost",
+        requestBody: {
+          content: {
+            "application/json": {
+              schema: {
+                properties: {
+                  auto_lock_delay_seconds: {
+                    description: "Delay in seconds before the lock automatically locks. Required when enabling auto-lock. Must be between 1 and 60.",
+                    format: "float",
+                    maximum: 60,
+                    minimum: 1,
+                    type: "number"
+                  },
+                  auto_lock_enabled: {
+                    description: "Whether to enable or disable auto-lock.",
+                    type: "boolean"
+                  },
+                  device_id: {
+                    description: "ID of the lock for which you want to configure the auto-lock.",
+                    format: "uuid",
+                    type: "string"
+                  }
+                },
+                required: ["device_id", "auto_lock_enabled"],
+                type: "object"
+              }
+            }
+          }
+        },
+        responses: {
+          200: {
+            content: {
+              "application/json": {
+                schema: {
+                  properties: {
+                    action_attempt: {
+                      $ref: "#/components/schemas/action_attempt"
+                    },
+                    ok: { type: "boolean" }
+                  },
+                  required: ["action_attempt", "ok"],
+                  type: "object"
+                }
+              }
+            },
+            description: "OK"
+          },
+          400: { description: "Bad Request" },
+          401: { description: "Unauthorized" }
+        },
+        security: [
+          { client_session: [] },
+          { pat_with_workspace: [] },
+          { console_session_with_workspace: [] },
+          { api_key: [] }
+        ],
+        summary: "/locks/configure_auto_lock",
+        tags: ["/locks"],
+        "x-action-attempt-type": "CONFIGURE_AUTO_LOCK",
+        "x-fern-sdk-group-name": ["locks"],
+        "x-fern-sdk-method-name": "configure_auto_lock",
+        "x-fern-sdk-return-value": "action_attempt",
+        "x-response-key": "action_attempt",
+        "x-title": "Configure Auto-Lock"
+      }
+    },
     "/locks/get": {
       get: {
         description: "Returns a specified [lock](https://docs.seam.co/latest/capability-guides/smart-locks).",
@@ -58639,7 +58886,8 @@ var openapi_default = {
                   "can_program_thermostat_programs_as_same_each_day",
                   "can_simulate_hub_connection",
                   "can_simulate_hub_disconnection",
-                  "can_simulate_paid_subscription"
+                  "can_simulate_paid_subscription",
+                  "can_configure_auto_lock"
                 ],
                 type: "string"
               },
@@ -58671,7 +58919,8 @@ var openapi_default = {
                   "can_program_thermostat_programs_as_same_each_day",
                   "can_simulate_hub_connection",
                   "can_simulate_hub_disconnection",
-                  "can_simulate_paid_subscription"
+                  "can_simulate_paid_subscription",
+                  "can_configure_auto_lock"
                 ],
                 type: "string"
               },
@@ -58884,7 +59133,8 @@ var openapi_default = {
                         "can_program_thermostat_programs_as_same_each_day",
                         "can_simulate_hub_connection",
                         "can_simulate_hub_disconnection",
-                        "can_simulate_paid_subscription"
+                        "can_simulate_paid_subscription",
+                        "can_configure_auto_lock"
                       ],
                       type: "string"
                     },
@@ -58912,7 +59162,8 @@ var openapi_default = {
                         "can_program_thermostat_programs_as_same_each_day",
                         "can_simulate_hub_connection",
                         "can_simulate_hub_disconnection",
-                        "can_simulate_paid_subscription"
+                        "can_simulate_paid_subscription",
+                        "can_configure_auto_lock"
                       ],
                       type: "string"
                     },
@@ -59430,7 +59681,8 @@ var openapi_default = {
                   "can_program_thermostat_programs_as_same_each_day",
                   "can_simulate_hub_connection",
                   "can_simulate_hub_disconnection",
-                  "can_simulate_paid_subscription"
+                  "can_simulate_paid_subscription",
+                  "can_configure_auto_lock"
                 ],
                 type: "string"
               },
@@ -59462,7 +59714,8 @@ var openapi_default = {
                   "can_program_thermostat_programs_as_same_each_day",
                   "can_simulate_hub_connection",
                   "can_simulate_hub_disconnection",
-                  "can_simulate_paid_subscription"
+                  "can_simulate_paid_subscription",
+                  "can_configure_auto_lock"
                 ],
                 type: "string"
               },
@@ -59619,7 +59872,8 @@ var openapi_default = {
                         "can_program_thermostat_programs_as_same_each_day",
                         "can_simulate_hub_connection",
                         "can_simulate_hub_disconnection",
-                        "can_simulate_paid_subscription"
+                        "can_simulate_paid_subscription",
+                        "can_configure_auto_lock"
                       ],
                       type: "string"
                     },
@@ -59647,7 +59901,8 @@ var openapi_default = {
                         "can_program_thermostat_programs_as_same_each_day",
                         "can_simulate_hub_connection",
                         "can_simulate_hub_disconnection",
-                        "can_simulate_paid_subscription"
+                        "can_simulate_paid_subscription",
+                        "can_configure_auto_lock"
                       ],
                       type: "string"
                     },
@@ -67362,6 +67617,11 @@ var openapi_default = {
                                   description: "Indicates whether the customer can manage reservations for their properties.",
                                   type: "boolean"
                                 },
+                                exclude_reservation_technical_details: {
+                                  default: false,
+                                  description: "Indicates whether to exclude technical details from reservation views.",
+                                  type: "boolean"
+                                },
                                 exclude_staff_management: {
                                   default: false,
                                   description: "Indicates whether the customer can manage staff for their properties.",
@@ -67730,6 +67990,11 @@ var openapi_default = {
                                   description: "Indicates whether the customer can manage reservations for their properties.",
                                   type: "boolean"
                                 },
+                                exclude_reservation_technical_details: {
+                                  default: false,
+                                  description: "Indicates whether to exclude technical details from reservation views.",
+                                  type: "boolean"
+                                },
                                 exclude_staff_management: {
                                   default: false,
                                   description: "Indicates whether the customer can manage staff for their properties.",
@@ -73877,7 +74142,8 @@ var openapi_default = {
                   "can_program_thermostat_programs_as_same_each_day",
                   "can_simulate_hub_connection",
                   "can_simulate_hub_disconnection",
-                  "can_simulate_paid_subscription"
+                  "can_simulate_paid_subscription",
+                  "can_configure_auto_lock"
                 ],
                 type: "string"
               },
@@ -73909,7 +74175,8 @@ var openapi_default = {
                   "can_program_thermostat_programs_as_same_each_day",
                   "can_simulate_hub_connection",
                   "can_simulate_hub_disconnection",
-                  "can_simulate_paid_subscription"
+                  "can_simulate_paid_subscription",
+                  "can_configure_auto_lock"
                 ],
                 type: "string"
               },
@@ -74080,7 +74347,8 @@ var openapi_default = {
                         "can_program_thermostat_programs_as_same_each_day",
                         "can_simulate_hub_connection",
                         "can_simulate_hub_disconnection",
-                        "can_simulate_paid_subscription"
+                        "can_simulate_paid_subscription",
+                        "can_configure_auto_lock"
                       ],
                       type: "string"
                     },
@@ -74108,7 +74376,8 @@ var openapi_default = {
                         "can_program_thermostat_programs_as_same_each_day",
                         "can_simulate_hub_connection",
                         "can_simulate_hub_disconnection",
-                        "can_simulate_paid_subscription"
+                        "can_simulate_paid_subscription",
+                        "can_configure_auto_lock"
                       ],
                       type: "string"
                     },