@sealant/mend 0.27.5 → 0.28.0

package/dist/main.js

@@ -17,7 +17,7 @@ import {
   repositoryCloneUrlIssue,
   sessionDisplayName,
   trackBracketedPaste
-} from "./chunk-A5I5EW2Y.js";
+} from "./chunk-7JPOKREB.js";
 
 // src/main.ts
 import { spawn as spawn3, spawnSync as spawnSync2 } from "node:child_process";
@@ -648,7 +648,9 @@ var COMMANDS = [
     summary: "the dashboard: every project and session, live",
     synopsis: [],
     description: [
-      "A full-screen view of every project and session, updating live. Pick a session to attach, stop, or take over. Bare mend with no command opens the same thing.",
+      "A full-screen view of every project and session, updating live. The session pane takes three quarters of the screen: a read-only detail for the selected session with the conversation record it has written so far. The remaining quarter is a sidebar of three stacked sections, projects then worktrees then sessions, where the section you are in stands open and the other two fold to the line that says what is selected. Bare mend with no command opens the same thing.",
+      "Moving the selection only ever navigates: arrows or j/k move inside the open section, enter and the arrows move between the sidebar and the session pane, and nothing takes this terminal until you ask. Reading the record leaves the sidebar as it was. The verbs are a to attach a live session, r to resume a settled one, n for another session in the selected worktree, w for a new worktree, e to rename, v to review the change, o to open it in the browser, Shift+K to stop, Shift+D to remove, and Shift+R to refresh.",
+      "Nothing is ever squeezed. A terminal too narrow for both gives the whole width to the side you are on, a terminal too short for three drawn panes shows the open section alone, and a one-line breadcrumb states whatever did not fit.",
       "The dashboard needs Node 26 or newer for its terminal. Every other command works on Node 22."
     ],
     see: ["sessions", "attach"]
@@ -7187,7 +7189,7 @@ var dashboard = async (config) => {
     );
     process.exit(rerun.status ?? 0);
   }
-  const { runDashboard } = await import("./dashboard-G52NHJCZ.js");
+  const { runDashboard } = await import("./dashboard-4WQC5MZ4.js");
   const agentShare = await startShareIfBridge(config);
   try {
     await runDashboard({

package/man/mend-accounts.1

@@ -1,4 +1,4 @@
-.TH MEND-ACCOUNTS 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-ACCOUNTS 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-accounts \- your connected accounts on the platform
 .SH SYNOPSIS

package/man/mend-adopt.1

@@ -1,4 +1,4 @@
-.TH MEND-ADOPT 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-ADOPT 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-adopt \- adopt a repository into the store
 .SH SYNOPSIS

package/man/mend-attach.1

@@ -1,4 +1,4 @@
-.TH MEND-ATTACH 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-ATTACH 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-attach \- reattach this terminal to a running session
 .SH SYNOPSIS

package/man/mend-codex.1

@@ -1,4 +1,4 @@
-.TH MEND-CODEX 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-CODEX 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-codex \- launch codex, claude, or opencode in a recorded worktree
 .SH SYNOPSIS

package/man/mend-completions.1

@@ -1,4 +1,4 @@
-.TH MEND-COMPLETIONS 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-COMPLETIONS 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-completions \- print the TAB\-completion hook
 .SH SYNOPSIS

package/man/mend-connect.1

@@ -1,4 +1,4 @@
-.TH MEND-CONNECT 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-CONNECT 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-connect \- send this machine's provider credential to the platform
 .SH SYNOPSIS

package/man/mend-continue.1

@@ -1,4 +1,4 @@
-.TH MEND-CONTINUE 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-CONTINUE 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-continue \- resume a session with its pending review follow\-up
 .SH SYNOPSIS

package/man/mend-doctor.1

@@ -1,4 +1,4 @@
-.TH MEND-DOCTOR 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-DOCTOR 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-doctor \- check this machine's setup
 .SH SYNOPSIS

package/man/mend-dotfiles-sync.1

@@ -1,4 +1,4 @@
-.TH MEND-DOTFILES-SYNC 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-DOTFILES-SYNC 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-dotfiles\-sync \- capture config files from this machine into your store
 .SH SYNOPSIS

package/man/mend-dotfiles.1

@@ -1,4 +1,4 @@
-.TH MEND-DOTFILES 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-DOTFILES 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-dotfiles \- your dotfiles on the server: repo and synced files
 .SH SYNOPSIS

package/man/mend-env-cluster.1

@@ -1,4 +1,4 @@
-.TH MEND-ENV-CLUSTER 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-ENV-CLUSTER 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-env\-cluster \- bind Kubernetes secrets and configmaps to the workspaces
 .SH SYNOPSIS

package/man/mend-env-load.1

@@ -1,4 +1,4 @@
-.TH MEND-ENV-LOAD 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-ENV-LOAD 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-env\-load \- load a .env into the project
 .SH SYNOPSIS

package/man/mend-env-show.1

@@ -1,4 +1,4 @@
-.TH MEND-ENV-SHOW 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-ENV-SHOW 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-env\-show \- what the project store holds: names only, never values
 .SH SYNOPSIS

package/man/mend-help.1

@@ -1,4 +1,4 @@
-.TH MEND-HELP 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-HELP 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-help \- this index, or one command's page
 .SH SYNOPSIS

package/man/mend-keys-init.1

@@ -1,4 +1,4 @@
-.TH MEND-KEYS-INIT 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-KEYS-INIT 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-keys\-init \- create your Mend key (ed25519) on the server
 .SH SYNOPSIS

package/man/mend-keys-mode.1

@@ -1,4 +1,4 @@
-.TH MEND-KEYS-MODE 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-KEYS-MODE 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-keys\-mode \- how your remotes are reached: mend\-key or bridge
 .SH SYNOPSIS

package/man/mend-keys-share.1

@@ -1,4 +1,4 @@
-.TH MEND-KEYS-SHARE 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-KEYS-SHARE 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-keys\-share \- relay this machine's ssh\-agent to the server
 .SH SYNOPSIS

package/man/mend-keys-show.1

@@ -1,4 +1,4 @@
-.TH MEND-KEYS-SHOW 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-KEYS-SHOW 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-keys\-show \- print your Mend public key
 .SH SYNOPSIS

package/man/mend-login.1

@@ -1,4 +1,4 @@
-.TH MEND-LOGIN 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-LOGIN 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-login \- sign this terminal in through the browser
 .SH SYNOPSIS

package/man/mend-logout.1

@@ -1,4 +1,4 @@
-.TH MEND-LOGOUT 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-LOGOUT 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-logout \- revoke this terminal's device token and forget it
 .SH SYNOPSIS

package/man/mend-man.1

@@ -1,4 +1,4 @@
-.TH MEND-MAN 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-MAN 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-man \- one command's page, or the whole manual, in man
 .SH SYNOPSIS

package/man/mend-pair.1

@@ -1,4 +1,4 @@
-.TH MEND-PAIR 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-PAIR 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-pair \- pair a phone or a second machine
 .SH SYNOPSIS

package/man/mend-projects.1

@@ -1,4 +1,4 @@
-.TH MEND-PROJECTS 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-PROJECTS 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-projects \- adopted projects and their live sessions
 .SH SYNOPSIS

package/man/mend-refresh.1

@@ -1,4 +1,4 @@
-.TH MEND-REFRESH 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-REFRESH 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-refresh \- fetch origin's branches into the store
 .SH SYNOPSIS

package/man/mend-rejoin.1

@@ -1,4 +1,4 @@
-.TH MEND-REJOIN 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-REJOIN 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-rejoin \- attach if live, otherwise resume
 .SH SYNOPSIS

package/man/mend-resume.1

@@ -1,4 +1,4 @@
-.TH MEND-RESUME 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-RESUME 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-resume \- rejoin a settled session with its state restored
 .SH SYNOPSIS

package/man/mend-run.1

@@ -1,4 +1,4 @@
-.TH MEND-RUN 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-RUN 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-run \- run any command as a session
 .SH SYNOPSIS

package/man/mend-server-logs.1

@@ -1,4 +1,4 @@
-.TH MEND-SERVER-LOGS 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-SERVER-LOGS 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-server\-logs \- print a bounded tail of the installation's container logs
 .SH SYNOPSIS

package/man/mend-server-restart.1

@@ -1,4 +1,4 @@
-.TH MEND-SERVER-RESTART 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-SERVER-RESTART 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-server\-restart \- restart Mend using the same generation and pin
 .SH SYNOPSIS

package/man/mend-server-setup.1

@@ -1,4 +1,4 @@
-.TH MEND-SERVER-SETUP 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-SERVER-SETUP 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-server\-setup \- install or repair the local Mend server
 .SH SYNOPSIS

package/man/mend-server-start.1

@@ -1,4 +1,4 @@
-.TH MEND-SERVER-START 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-SERVER-START 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-server\-start \- start the selected server generation
 .SH SYNOPSIS

package/man/mend-server-status.1

@@ -1,4 +1,4 @@
-.TH MEND-SERVER-STATUS 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-SERVER-STATUS 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-server\-status \- show the saved pin, generation and container state
 .SH SYNOPSIS

package/man/mend-server-stop.1

@@ -1,4 +1,4 @@
-.TH MEND-SERVER-STOP 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-SERVER-STOP 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-server\-stop \- stop Mend, Postgres and Garage without deleting data
 .SH SYNOPSIS

package/man/mend-server-upgrade.1

@@ -1,4 +1,4 @@
-.TH MEND-SERVER-UPGRADE 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-SERVER-UPGRADE 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-server\-upgrade \- upgrade to an explicit version with a database backup
 .SH SYNOPSIS

package/man/mend-server.1

@@ -1,4 +1,4 @@
-.TH MEND-SERVER 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-SERVER 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-server \- install and manage this machine's Mend server
 .SH SYNOPSIS

package/man/mend-service-add.1

@@ -1,4 +1,4 @@
-.TH MEND-SERVICE-ADD 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-SERVICE-ADD 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-service\-add \- adopt a port something in the workspace already listens on
 .SH SYNOPSIS

package/man/mend-service-connect.1

@@ -1,4 +1,4 @@
-.TH MEND-SERVICE-CONNECT 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-SERVICE-CONNECT 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-service\-connect \- bring live Services to this machine's loopback
 .SH SYNOPSIS

package/man/mend-service-init.1

@@ -1,4 +1,4 @@
-.TH MEND-SERVICE-INIT 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-SERVICE-INIT 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-service\-init \- scaffold mend.toml from package.json and compose ports
 .SH SYNOPSIS

package/man/mend-service-list.1

@@ -1,4 +1,4 @@
-.TH MEND-SERVICE-LIST 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-SERVICE-LIST 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-service\-list \- every live service and its observed state
 .SH SYNOPSIS

package/man/mend-service-logs.1

@@ -1,4 +1,4 @@
-.TH MEND-SERVICE-LOGS 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-SERVICE-LOGS 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-service\-logs \- follow a supervised service's output
 .SH SYNOPSIS

package/man/mend-service-restart.1

@@ -1,4 +1,4 @@
-.TH MEND-SERVICE-RESTART 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-SERVICE-RESTART 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-service\-restart \- re\-run a service's recorded command, same URL
 .SH SYNOPSIS

package/man/mend-service-run.1

@@ -1,4 +1,4 @@
-.TH MEND-SERVICE-RUN 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-SERVICE-RUN 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-service\-run \- start and supervise a server in the session's workspace
 .SH SYNOPSIS

package/man/mend-service-stop.1

@@ -1,4 +1,4 @@
-.TH MEND-SERVICE-STOP 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-SERVICE-STOP 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-service\-stop \- stop a service and close its host port
 .SH SYNOPSIS

package/man/mend-sessions.1

@@ -1,4 +1,4 @@
-.TH MEND-SESSIONS 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-SESSIONS 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-sessions \- sessions with their review facts
 .SH SYNOPSIS

package/man/mend-shell.1

@@ -1,4 +1,4 @@
-.TH MEND-SHELL 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-SHELL 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-shell \- open a shell in a live session's workspace
 .SH SYNOPSIS

package/man/mend-skills-push.1

@@ -1,4 +1,4 @@
-.TH MEND-SKILLS-PUSH 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-SKILLS-PUSH 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-skills\-push \- upload ~/.agents/skills into the library
 .SH SYNOPSIS

package/man/mend-skills.1

@@ -1,4 +1,4 @@
-.TH MEND-SKILLS 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-SKILLS 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-skills \- your skill library on the server, or a project's
 .SH SYNOPSIS

package/man/mend-ssh-setup.1

@@ -1,4 +1,4 @@
-.TH MEND-SSH-SETUP 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-SSH-SETUP 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-ssh\-setup \- make this machine ready to ssh into workspaces, once
 .SH SYNOPSIS

package/man/mend-ssh.1

@@ -1,4 +1,4 @@
-.TH MEND-SSH 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-SSH 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-ssh \- workspace SSH status: gateway, registered keys, ssh config
 .SH SYNOPSIS

package/man/mend-stop.1

@@ -1,4 +1,4 @@
-.TH MEND-STOP 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-STOP 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-stop \- stop the agent; the record and the review remain
 .SH SYNOPSIS

package/man/mend-ui.1

@@ -1,4 +1,4 @@
-.TH MEND-UI 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-UI 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-ui \- the dashboard: every project and session, live
 .SH SYNOPSIS
@@ -6,7 +6,11 @@ mend\-ui \- the dashboard: every project and session, live
 .br
 .SH DESCRIPTION
 .PP
-A full\-screen view of every project and session, updating live. Pick a session to attach, stop, or take over. Bare mend with no command opens the same thing.
+A full\-screen view of every project and session, updating live. The session pane takes three quarters of the screen: a read\-only detail for the selected session with the conversation record it has written so far. The remaining quarter is a sidebar of three stacked sections, projects then worktrees then sessions, where the section you are in stands open and the other two fold to the line that says what is selected. Bare mend with no command opens the same thing.
+.PP
+Moving the selection only ever navigates: arrows or j/k move inside the open section, enter and the arrows move between the sidebar and the session pane, and nothing takes this terminal until you ask. Reading the record leaves the sidebar as it was. The verbs are a to attach a live session, r to resume a settled one, n for another session in the selected worktree, w for a new worktree, e to rename, v to review the change, o to open it in the browser, Shift+K to stop, Shift+D to remove, and Shift+R to refresh.
+.PP
+Nothing is ever squeezed. A terminal too narrow for both gives the whole width to the side you are on, a terminal too short for three drawn panes shows the open section alone, and a one\-line breadcrumb states whatever did not fit.
 .PP
 The dashboard needs Node 26 or newer for its terminal. Every other command works on Node 22.
 .SH SEE ALSO

package/man/mend-uninstall.1

@@ -1,4 +1,4 @@
-.TH MEND-UNINSTALL 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-UNINSTALL 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-uninstall \- remove the server, this machine's Mend files, or both
 .SH SYNOPSIS

package/man/mend-version.1

@@ -1,4 +1,4 @@
-.TH MEND-VERSION 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-VERSION 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-version \- this CLI's version, and the server's when it answers
 .SH SYNOPSIS

package/man/mend-worktrees.1

@@ -1,4 +1,4 @@
-.TH MEND-WORKTREES 1 "" "mend 0.27.5" "mend manual"
+.TH MEND-WORKTREES 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend\-worktrees \- every worktree and the sessions inside it
 .SH SYNOPSIS

package/man/mend.1

@@ -1,4 +1,4 @@
-.TH MEND 1 "" "mend 0.27.5" "mend manual"
+.TH MEND 1 "" "mend 0.28.0" "mend manual"
 .SH NAME
 mend \- the agent workbench
 .SH SYNOPSIS

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@sealant/mend",
-  "version": "0.27.5",
+  "version": "0.28.0",
   "description": "The mend CLI: adopt a repository into Mend's store, launch your coding agent in a recorded session worktree, detach and reattach from any terminal",
   "keywords": [
     "claude-code",