@scrypted/libav 1.0.180 → 1.0.181

package/openh264/run_Test.sh

@@ -0,0 +1,91 @@
+#!/bin/bash
+#**********************************************************************************
+#    This script is for test on travis.Currently there are 5 jobs running on
+#    travis in parallel status which are listed as below:
+#        1.Unit test with gcc compiler;
+#        2.Unit test with clang compiler;
+#        3.Binary comparison test for test bit stream A;
+#        4.Binary comparison test for test bit stream B;
+#        5.Binary comparison test for test bit stream C.
+#    For binary comparison test,before running all test cases, it need to prepare
+#    the test space.On travis,as those parallel jobs are running on different VMs,
+#    so each job need to prepare for its test space for itself.
+#
+#   --usage:
+#             ./runTest.sh  UnitTest
+#         or  ./runTest.sh  BinaryCompare  ${TestBitStreamName}
+#
+# date:  10/06/2014 Created
+#**********************************************************************************
+#usage: runInputParamCheck  ${TestType}  ${TestBitStream}
+runInputParamCheck()
+{
+  local ParameterFlag=""
+  if [  $# -eq 1 -a   "$1" = "UnitTest" ]
+  then
+    let "ParameterFlag=0"
+  elif [  $# -eq 2 -a   "$1" = "BinaryCompare" ]
+  then
+    let "ParameterFlag=0"
+  else
+    let "ParameterFlag=1"
+  fi
+  return ${ParameterFlag}
+}
+#usage: runUnitTest
+runUnitTest()
+{
+  CFLAGS=-Werror make -B ENABLE64BIT=Yes BUILDTYPE=Release all plugin test
+  CFLAGS=-Werror make -B ENABLE64BIT=Yes BUILDTYPE=Debug   all plugin test
+  CFLAGS=-Werror make -B ENABLE64BIT=No  BUILDTYPE=Release all plugin test
+  CFLAGS=-Werror make -B ENABLE64BIT=No  BUILDTYPE=Debug   all plugin test
+  return $?
+}
+#usage: runBinaryTest $TestBitStream
+runBinaryTest()
+{
+  if [ ! $# -eq 2  ]
+  then
+    echo "usage: runPrepareAndBinaryTest  \$TestBitStream"
+    exit 1
+  fi
+  local TestBitStream=$1
+  local TestType=$2
+  local WorkingDir=`pwd`
+  local BinaryTestDir="test/encoder_binary_comparison"
+  cd ${WorkingDir}
+  echo ""
+  echo " binary compare test, test bit stream is ${TestBitStream}"
+  echo ""
+  ${BinaryTestDir}/run_OneBitStream.sh  ${TestBitStream} ${TestType}
+  return $?
+}
+#usage:runMain  ${TestType}  ${TestBitStream}
+runMain()
+{
+  local TestType=$1
+  local TestBitStream=$2
+  runInputParamCheck  ${TestType}  ${TestBitStream}
+  if [  ! $?  -eq 0  ]
+  then
+    echo "usage:     ./runTest.sh  UnitTest  \${PrepareFlag}"
+    echo "       or  ./runTest.sh  BinaryCompare  \${TestBitStreamName} \${PrepareFlag} "
+    exit 1
+  fi
+  if [ "${TestType}"  = "UnitTest"  ]
+  then
+    set -e
+    runUnitTest
+    return $?
+  fi
+  if [  "${TestType}"  = "BinaryCompare" ]
+  then
+    set -e
+    runBinaryTest ${TestBitStream} TravisTest
+    return $?
+  fi
+}
+TestType=$1
+TestBitStream=$2
+runMain  ${TestType}  ${TestBitStream}
+

package/openh264/settings.gradle

@@ -0,0 +1,4 @@
+include ':test-dec', ':test-enc', ':unittest'
+project(':test-dec').projectDir = new File('codec/build/android/dec')
+project(':test-enc').projectDir = new File('codec/build/android/enc')
+project(':unittest').projectDir = new File('test/build/android')

package/openh264/subprojects/gtest.wrap

@@ -0,0 +1,10 @@
+[wrap-file]
+directory = googletest-release-1.8.0
+
+source_url = https://github.com/google/googletest/archive/release-1.8.0.zip
+source_filename = gtest-1.8.0.zip
+source_hash = f3ed3b58511efd272eb074a3a6d6fb79d7c2e6a0e374323d1e6bcbcc1ef141bf
+
+patch_url = https://wrapdb.mesonbuild.com/v1/projects/gtest/1.8.0/4/get_zip
+patch_filename = gtest-1.8.0-4-wrap.zip
+patch_hash = 0b90fe055acbdb002a37dfb035184b306008b763931158497ef5dbaa8c7925af

package/openh264/testbin/AutoBuild_Windows_VS2008.bat

@@ -0,0 +1,59 @@
+echo off
+SET usage="this file must located in ..\testbin\ based on our code structure  "
+echo %usage%
+
+echo "Auto build of openH264 by VS2008"
+
+SET VCBUILDEXE="C:\Program Files (x86)\Microsoft Visual Studio 9.0\VC\vcpackages\vcbuild.exe"
+
+SET CurDir=%~dp0
+SET EncoderProjectDir="..\codec\build\win32\enc\"
+SET DecoderProjectDir="..\codec\build\win32\dec\"
+SET VPProjectDir="..\codec\processing\build\win32\"
+
+SET CodecBinDir="..\codec\build\win32\bin\"
+SET VPBinDir="..\processing\bin\"
+
+SET EncoderBuildFlag=1
+SET DecoderBuildFlag=1
+SET VPBuildFlag=1
+SET MakefileLogFile="${CurDir}\CodecVPBuild.log"
+
+rem ************************************************
+rem call VP build
+echo "Welsvp Building....."
+cd %VPProjectDir%
+rem vcclean
+%VCBUILDEXE% WelsVP.vcproj
+
+
+rem ************************************************
+rem call WelsEncoder build
+echo "WelsEncoder Building....."
+
+cd %CurDir%
+cd %EncoderProjectDir%
+rem vcclean
+%VCBUILDEXE% WelsEncCore.vcproj
+%VCBUILDEXE% WelsEncPlus.vcproj
+%VCBUILDEXE% encConsole.vcproj
+
+rem ************************************************
+rem call WelsDecoder build
+echo "WelsDecoder Building....."
+
+cd %CurDir%
+cd %DecoderProjectDir%
+rem vcclean
+%VCBUILDEXE% WelsDecCore.vcproj
+%VCBUILDEXE% WelsDecPlus.vcproj
+%VCBUILDEXE% decConsole.vcproj
+
+cd %CurDir%
+echo "this is the end of auto build..."
+pause
+
+rem TBD
+
+
+

package/openh264/testbin/CmdLineExample.sh

@@ -0,0 +1,7 @@
+../h264enc welsenc_vd_1d.cfg
+../h264enc welsenc_vd_rc.cfg
+../h264enc welsenc_arbitrary_res.cfg
+
+../h264dec ../res/test_vd_1d.264 test_vd_1d.yuv
+../h264dec ../res/test_vd_rc.264 test_vd_rc.yuv
+../h264dec ../res/Static.264 Static.yuv

package/openh264/testbin/CmdLineReadMe

@@ -0,0 +1,22 @@
+/* Instant Runable Configurations */
+//for encoder configure files
+welsenc_vd_1d.cfg
+welsenc_vd_rc.cfg
+welsenc_arbitrary_res.cfg
+
+//the actual generated decoder EXE files are in folder ../bin/win32/release/ with Release build
+//user may copy "decConsole.exe" and "welsdec.dll" into ../bin
+//Now assume the generated EXE files are in folder ../bin
+
+Example Command Line for encoding in Windows:
+../bin/encConsole.exe welsenc_vd_1d.cfg
+../bin/encConsole.exe welsenc_vd_rc.cfg
+../bin/encConsole.exe welsenc_arbitrary_res.cfg
+
+Example Command Line for decoding in Windows
+../bin/decConsole.exe ../res/test_vd_1d.264 test_vd_1d.yuv
+../bin/decConsole.exe ../res/test_vd_rc.264 test_vd_rc.yuv
+../bin/decConsole.exe ../res/Static.264 Static.yuv
+
+Example shell script for Linux for encoder & decoder:
+CmdLineExample.sh

package/openh264/testbin/layer2.cfg

@@ -0,0 +1,37 @@
+# Layer Configuration File
+
+
+#============================== OUTPUT ==============================
+FrameWidth     320                     # Output  frame width
+FrameHeight    192                     # Output  frame height
+FrameRateOut    12                     # Output frame rate [Hz]
+ReconFile       rec_layer2.yuv          # Reconstructed file
+
+#============================== CODING ==============================
+ProfileIdc      66          # value of profile_idc (or 0 for auto detection)
+
+InitialQP       24			# Quantization parameters for base quality layer
+#================================ RATE CONTROL ===============================
+SpatialBitrate		600		# Unit: kbps, controled by DisableRC also
+MaxSpatialBitrate   0     # Unit: kbps, max bitrate for current layer, 0 - unspecified
+#============================== MultiSlice Slice Argument ==============================
+# for S/M Slice(s) mode settings
+SliceMode			0		# 0: sigle slice mode; >0: multiple slices mode, see below;
+SliceSize			1500
+SliceNum			1		# multiple slices number specified
+
+SlicesAssign0		960		# count number of MBs in slice #0
+SlicesAssign1		0		# count number of MBs in slice #1
+SlicesAssign2		0		# count number of MBs in slice #2
+SlicesAssign3		0		# count number of MBs in slice #3 -- seting here is for better testing
+SlicesAssign4		0		# count number of MBs in slice #4
+SlicesAssign5		0		# count number of MBs in slice #5
+SlicesAssign6		0		# count number of MBs in slice #6
+SlicesAssign7		0		# count number of MBs in slice #7
+
+### DESIGN OF SLICE MODE ####
+# 0 SM_SINGLE_SLICE         | SliceNum==1
+# 1 SM_FIXEDSLCNUM_SLICE    | according to SliceNum        | enabled dynamic slicing for multi-thread
+# 2 SM_RASTER_SLICE         | according to SlicesAssign    | need input of MB numbers each slice. In addition, if other constraint in SSliceArgument is presented, need to follow the constraints. Typically if MB num and slice size are both constrained, re-encoding may be involved.
+# 3 SM_SIZELIMITED_SLICE    | according to SliceSize       | slicing according to size, the slicing will be dynamic(have no idea about slice_nums until encoding current frame)
+# 4 SM_RESERVED             | reserved

package/openh264/testbin/layer2_arbitrary_res.cfg

@@ -0,0 +1,37 @@
+# Layer Configuration File
+
+
+#============================== OUTPUT ==============================
+FrameWidth     320                     # Output  frame width
+FrameHeight    192                     # Output  frame height
+FrameRateOut    12                     # Output frame rate [Hz]
+ReconFile       rec_layer2.yuv          # Reconstructed file
+
+#============================== CODING ==============================
+ProfileIdc      66          # value of profile_idc (or 0 for auto detection)
+
+InitialQP       24			# Quantization parameters for base quality layer
+#================================ RATE CONTROL ===============================
+SpatialBitrate		600		# Unit: kbps, controled by DisableRC also
+MaxSpatialBitrate   800     # Unit: kbps, max bitrate for current layer
+#============================== MultiSlice Slice Argument ==============================
+# for S/M Slice(s) mode settings
+SliceMode			0		# 0: sigle slice mode; >0: multiple slices mode, see below;
+SliceSize			1500
+SliceNum			1		# multiple slices number specified
+
+SlicesAssign0		960		# count number of MBs in slice #0
+SlicesAssign1		0		# count number of MBs in slice #1
+SlicesAssign2		0		# count number of MBs in slice #2
+SlicesAssign3		0		# count number of MBs in slice #3 -- seting here is for better testing
+SlicesAssign4		0		# count number of MBs in slice #4
+SlicesAssign5		0		# count number of MBs in slice #5
+SlicesAssign6		0		# count number of MBs in slice #6
+SlicesAssign7		0		# count number of MBs in slice #7
+
+### DESIGN OF SLICE MODE ####
+# 0 SM_SINGLE_SLICE         | SliceNum==1
+# 1 SM_FIXEDSLCNUM_SLICE    | according to SliceNum        | enabled dynamic slicing for multi-thread
+# 2 SM_RASTER_SLICE         | according to SlicesAssign    | need input of MB numbers each slice. In addition, if other constraint in SSliceArgument is presented, need to follow the constraints. Typically if MB num and slice size are both constrained, re-encoding may be involved.
+# 3 SM_SIZELIMITED_SLICE    | according to SliceSize       | slicing according to size, the slicing will be dynamic(have no idea about slice_nums until encoding current frame)
+# 4 SM_RESERVED             | reserved

package/openh264/testbin/layer2_vd.cfg

@@ -0,0 +1,38 @@
+# Layer Configuration File
+
+
+#============================== OUTPUT ==============================
+FrameWidth     320                     # Output  frame width
+FrameHeight    192                     # Output  frame height
+FrameRateOut    12                     # Output frame rate [Hz]
+ReconFile       rec_layer2.yuv          # Reconstructed file
+
+#============================== CODING ==============================
+ProfileIdc      66          # value of profile_idc (or 0 for auto detection)
+
+InitialQP       24			# Quantization parameters for base quality layer
+#================================ RATE CONTROL ===============================
+SpatialBitrate		600		# Unit: kbps, controled by DisableRC also
+MaxSpatialBitrate   800     # Unit: kbps, max bitrate for current layer
+#============================== MultiSlice Slice Argument ==============================
+# for S/M Slice(s) mode settings
+SliceMode			0		# 0: sigle slice mode; >0: multiple slices mode, see below;
+SliceSize			1500
+SliceNum			1		# multiple slices number specified
+
+SlicesAssign0		960		# count number of MBs in slice #0
+SlicesAssign1		0		# count number of MBs in slice #1
+SlicesAssign2		0		# count number of MBs in slice #2
+SlicesAssign3		0		# count number of MBs in slice #3 -- seting here is for better testing
+SlicesAssign4		0		# count number of MBs in slice #4
+SlicesAssign5		0		# count number of MBs in slice #5
+SlicesAssign6		0		# count number of MBs in slice #6
+SlicesAssign7		0		# count number of MBs in slice #7
+
+### DESIGN OF SLICE MODE ####
+# 0 SM_SINGLE_SLICE         | SliceNum==1
+# 1 SM_FIXEDSLCNUM_SLICE    | according to SliceNum        | enabled dynamic slicing for multi-thread
+# 2 SM_RASTER_SLICE         | according to SlicesAssign    | need input of MB numbers each slice. In addition, if other constraint in SSliceArgument is presented, need to follow the constraints. Typically if MB num and slice size are both constrained, re-encoding may be involved.
+# 3 SM_SIZELIMITED_SLICE    | according to SliceSize       | slicing according to size, the slicing will be dynamic(have no idea about slice_nums until encoding current frame)
+# 4 SM_RESERVED             | reserved
+

package/openh264/testbin/layer2_vd_rc.cfg

@@ -0,0 +1,38 @@
+# Layer Configuration File
+
+
+#============================== OUTPUT ==============================
+FrameWidth     320                     # Output  frame width
+FrameHeight    192                     # Output  frame height
+FrameRateOut    12                     # Output frame rate [Hz]
+ReconFile       rec_layer2.yuv          # Reconstructed file
+
+#============================== CODING ==============================
+ProfileIdc      66          # value of profile_idc (or 0 for auto detection)
+
+InitialQP       24			# Quantization parameters for base quality layer
+#================================ RATE CONTROL ===============================
+SpatialBitrate		600		# Unit: kbps, controled by DisableRC also
+MaxSpatialBitrate   800     # Unit: kbps, max bitrate for current layer
+#============================== MultiSlice Slice Argument ==============================
+# for S/M Slice(s) mode settings
+SliceMode			0		# 0: sigle slice mode; >0: multiple slices mode, see below;
+SliceSize			1500
+SliceNum			1		# multiple slices number specified
+
+SlicesAssign0		960		# count number of MBs in slice #0
+SlicesAssign1		0		# count number of MBs in slice #1
+SlicesAssign2		0		# count number of MBs in slice #2
+SlicesAssign3		0		# count number of MBs in slice #3 -- seting here is for better testing
+SlicesAssign4		0		# count number of MBs in slice #4
+SlicesAssign5		0		# count number of MBs in slice #5
+SlicesAssign6		0		# count number of MBs in slice #6
+SlicesAssign7		0		# count number of MBs in slice #7
+
+### DESIGN OF SLICE MODE ####
+# 0 SM_SINGLE_SLICE         | SliceNum==1
+# 1 SM_FIXEDSLCNUM_SLICE    | according to SliceNum        | enabled dynamic slicing for multi-thread
+# 2 SM_RASTER_SLICE         | according to SlicesAssign    | need input of MB numbers each slice. In addition, if other constraint in SSliceArgument is presented, need to follow the constraints. Typically if MB num and slice size are both constrained, re-encoding may be involved.
+# 3 SM_SIZELIMITED_SLICE    | according to SliceSize       | slicing according to size, the slicing will be dynamic(have no idea about slice_nums until encoding current frame)
+# 4 SM_RESERVED             | reserved
+

package/openh264/testbin/welsenc.cfg

@@ -0,0 +1,71 @@
+# Cisco Scalable H.264/AVC Extension Encoder Configuration File
+
+#============================== GENERAL ==============================
+UsageType                        0              # 0: camera video 1:screen content
+SimulcastAVC                     0              # 0: use SVC syntax for higher layers; 1: use Simulcast AVC
+SourceWidth                      320            # input video width
+SourceHeight                     192            # input video height
+InputFile       ../res/CiscoVT2people_320x192_12fps.yuv # Input  file
+OutputFile                       test.264       # Bitstream file
+MaxFrameRate                     30             # Maximum frame rate [Hz]
+FramesToBeEncoded                -1             # Number of frames (at input frame rate)
+
+TemporalLayerNum                 2              # temporal layer number(1--4)
+IntraPeriod                      0              # Intra Period ( multipler of GoP size or -1)
+SpsPpsIDStrategy                 1              # sps/pps id strategy(0-4):
+                                                #   0: const id, 1: increasing id, 2: sps list,
+                                                #   3: sps list & pps increase, 4: sps/pps list
+
+EnableFrameCropping              1              # enable frame cropping flag
+EntropyCodingModeFlag            0              # 0:cavlc 1:cabac
+MaxNalSize                       0              # Unit:Byte, Maximum Nal size
+ComplexityMode                   0              # 0:low complexity mode 1:medium complexity mode
+                                                # 2:high complexity mode
+#============================== LOOP FILTER ==============================
+LoopFilterDisableIDC             0              # Loop filter idc (0: on, 1: off,
+                                                # 2: on except for slice boundaries,
+                                                # 3: two stage. slice boundries on in second stage
+                                                # 4: Luma on but Chroma off (w.r.t. idc=0)
+                                                # 5: Luma on except on slice boundaries, but Chroma off in enh. layer (w.r.t. idc=2)
+                                                # 6: Luma on in two stage. slice boundries on in second stage, but Chroma off (w.r.t. idc=3)
+LoopFilterAlphaC0Offset          0              # AlphaOffset(-6..+6): valid range
+LoopFilterBetaOffset             0              # BetaOffset (-6..+6): valid range
+#============================== SOFTWARE IMPLEMENTATION ==============================
+MultipleThreadIdc                1              # 0: auto(dynamic imp. internal encoder),
+                                                # 1: multiple threads imp. disabled,
+                                                # >1: count number of threads
+UseLoadBalancing                 1              # under particular slice mode, when multi-threading is used, whether apply dynamic slicing for load balancing
+
+#============================== RATE CONTROL ==============================
+RCMode                           0              # -1: rc off mode, 0: quality mode, 1: bitrate mode,
+                                                # 2: buffer based mode,can't control bitrate,
+                                                # 3: bitrate mode based on timestamp input
+TargetBitrate                    5000           # Unit: kbps, controled by EnableRC also
+MaxOverallBitrate                0              # Unit: kbps, max bitrate overall, 0 - unspecified
+EnableFrameSkip                  1              # Enable Frame Skip
+MaxQp                            51             # maximum quant
+MinQp                            0              # minimum quant
+#============================== DENOISE CONTROL ==============================
+EnableDenoise                    0              # Enable Denoise (1: enable, 0: disable)
+
+#============================== SCENE CHANGE DETECTION CONTROL =======================
+EnableSceneChangeDetection       1              # Enable Scene Change Detection (1: enable, 0: disable)
+
+#============================== BACKGROUND DETECTION CONTROL ==============================
+EnableBackgroundDetection        1              # BGD control(1: enable, 0: disable)
+
+#============================== ADAPTIVE QUANTIZATION CONTROL =======================
+EnableAdaptiveQuantization       1              # Enable Adaptive Quantization (1: enable, 0: disable)
+
+#============================== LONG TERM REFERENCE CONTROL ==============================
+EnableLongTermReference          1              # Enable Long Term Reference (1: enable, 0: disable)
+LtrMarkPeriod                    30             # Long Term Reference Marking Period
+
+#============================== LAYER DEFINITION ==============================
+PrefixNALAddingCtrl              0              # Control flag of adding prefix unit (0: off, 1: on)
+                                                # It shall always be on in SVC contexts (i.e. when there are CGS/MGS/spatial enhancement layers)
+                                                # Can be disabled when no inter spatial layer prediction in case of its value as 0
+NumLayers                        1              # Number of layers
+//LayerCfg                         layer0.cfg     # Layer 0 configuration file
+//LayerCfg                         layer1.cfg     # Layer 1 configuration file
+LayerCfg                         layer2.cfg     # Layer 2 configuration file

package/openh264/testbin/welsenc_arbitrary_res.cfg

@@ -0,0 +1,70 @@
+# Cisco Scalable H.264/AVC Extension Encoder Configuration File
+
+#============================== GENERAL ==============================
+UsageType                        0              # 0: camera video 1:screen content
+SimulcastAVC                     0              # 0: use SVC syntax for higher layers; 1: use Simulcast AVC
+SourceWidth                      152            # Input  frame width
+SourceHeight                     100            # Input  frame height
+InputFile       ../res/Static_152_100.yuv       # Input  file
+OutputFile                       Static.264     # Bitstream file
+MaxFrameRate                     30             # Maximum frame rate [Hz]
+FramesToBeEncoded                -1             # Number of frames (at input frame rate)
+
+TemporalLayerNum                 3              # temporal layer number(1--4
+IntraPeriod                      0              # Intra Period ( multiple of GoP size or -1)
+SpsPpsIDStrategy                 1              # sps/pps id strategy(0-4):
+                                                #   0: const id, 1: increasing id, 2: sps list,
+                                                #   3: sps list & pps increase, 4: sps/pps list
+
+EnableFrameCropping              1              # enable frame cropping flag
+EntropyCodingModeFlag            0              # 0:cavlc 1:cabac
+MaxNalSize                       0              # Unit:Byte, Maximum Nal size
+ComplexityMode                   0              # 0:low complexity mode 1:medium complexity mode
+                                                # 2:high complexity mode
+#============================== LOOP FILTER ==============================
+LoopFilterDisableIDC             0              # Loop filter idc (0: on, 1: off,
+                                                # 2: on except for slice boundaries,
+                                                # 3: two stage. slice boundries on in second stage
+                                                # 4: Luma on but Chroma off (w.r.t. idc=0)
+                                                # 5: Luma on except on slice boundaries, but Chroma off in enh. layer (w.r.t. idc=2)
+                                                # 6: Luma on in two stage. slice boundries on in second stage, but Chroma off (w.r.t. idc=3)
+LoopFilterAlphaC0Offset          0              # AlphaOffset(-6..+6): valid range
+LoopFilterBetaOffset             0              # BetaOffset (-6..+6): valid range
+
+#============================== SOFTWARE IMPLEMENTATION ==============================
+MultipleThreadIdc                1              # 0: auto(dynamic imp. internal encoder),
+                                                # 1: multiple threads imp. disabled,
+                                                # >1: count number of threads
+
+#============================== RATE CONTROL ==============================
+RCMode                           0              # -1: rc off mode, 0: quality mode, 1: bitrate mode,
+                                                # 2: buffer based mode,can't control bitrate
+                                                # 3: bitrate mode based on timestamp input
+TargetBitrate                    5000           # Unit: kbps, controled by EnableRC also
+MaxOverallBitrate                6000           # Unit: kbps, max bitrate overall
+MaxQp                            51             # maximum quant
+MinQp                            0              # minimum quant
+#============================== DENOISE CONTROL ==============================
+EnableDenoise                    0              # Enable Denoise (1: enable, 0: disable)
+
+#============================== SCENE CHANGE DETECTION CONTROL =======================
+EnableSceneChangeDetection       1              # Enable Scene Change Detection (1: enable, 0: disable)
+
+#============================== BACKGROUND DETECTION CONTROL ==============================
+EnableBackgroundDetection        1              # BGD control(1: enable, 0: disable)
+
+#============================== ADAPTIVE QUANTIZATION CONTROL =======================
+EnableAdaptiveQuantization       1              # Enable Adaptive Quantization (1: enable, 0: disable)
+
+#============================== LONG TERM REFERENCE CONTROL ==============================
+EnableLongTermReference          0              # Enable Long Term Reference (1: enable, 0: disable)
+LtrMarkPeriod                    30             # Long Term Reference Marking Period
+
+#============================== LAYER DEFINITION ==============================
+PrefixNALAddingCtrl              0              # Control flag of adding prefix unit (0: off, 1: on)
+                                                # It shall always be on in SVC contexts (i.e. when there are CGS/MGS/spatial enhancement layers)
+                                                # Can be disabled when no inter spatial layer prediction in case of its value as 0
+NumLayers                        1              # Number of layers
+//LayerCfg                         layer0.cfg     # Layer 0 configuration file
+//LayerCfg                         layer1.cfg     # Layer 1 configuration file
+LayerCfg                         layer2_arbitrary_res.cfg        # Layer 2 configuration file

package/openh264/testbin/welsenc_ios.cfg

@@ -0,0 +1,71 @@
+# Cisco Scalable H.264/AVC Extension Encoder Configuration File
+
+#============================== GENERAL ==============================
+UsageType                        0              # 0: camera video 1:screen content
+SimulcastAVC                     0              # 0: use SVC syntax for higher layers; 1: use Simulcast AVC
+SourceWidth                      320            # input video width
+SourceHeight                     192            # input video height
+InputFile       ../res/CiscoVT2people_320x192_12fps.yuv # Input  file
+OutputFile                       test.264       # Bitstream file
+MaxFrameRate                     30             # Maximum frame rate [Hz]
+FramesToBeEncoded                -1             # Number of frames (at input frame rate)
+
+TemporalLayerNum                 3              # temporal layer number(1--4)
+IntraPeriod                      0              # Intra Period ( multipler of GoP size or -1)
+SpsPpsIDStrategy                 1              # sps/pps id strategy(0-4):
+                                                #   0: const id, 1: increasing id, 2: sps list,
+                                                #   3: sps list & pps increase, 4: sps/pps list
+
+EnableFrameCropping              1              # enable frame cropping flag
+EntropyCodingModeFlag            0              # 0:cavlc 1:cabac
+MaxNalSize                       0              # Unit:Byte, Maximum Nal size
+ComplexityMode                   0              # 0:low complexity mode 1:medium complexity mode
+                                                # 2:high complexity mode
+#============================== LOOP FILTER ==============================
+LoopFilterDisableIDC             0              # Loop filter idc (0: on, 1: off,
+                                                # 2: on except for slice boundaries,
+                                                # 3: two stage. slice boundries on in second stage
+                                                # 4: Luma on but Chroma off (w.r.t. idc=0)
+                                                # 5: Luma on except on slice boundaries, but Chroma off in enh. layer (w.r.t. idc=2)
+                                                # 6: Luma on in two stage. slice boundries on in second stage, but Chroma off (w.r.t. idc=3)
+LoopFilterAlphaC0Offset          0              # AlphaOffset(-6..+6): valid range
+LoopFilterBetaOffset             0              # BetaOffset (-6..+6): valid range
+
+#============================== SOFTWARE IMPLEMENTATION ==============================
+MultipleThreadIdc                1              # 0: auto(dynamic imp. internal encoder),
+                                                # 1: multiple threads imp. disabled,
+                                                # >1: count number of threads
+
+#============================== RATE CONTROL ==============================
+RCMode                           0              # -1: rc off mode, 0: quality mode, 1: bitrate mode,
+                                                # 2: buffer based mode,can't control bitrate,
+                                                # 3: bitrate mode based on timestamp input
+TargetBitrate                    5000           # Unit: kbps, controled by EnableRC also
+MaxOverallBitrate                6000           # Unit: kbps, max bitrate overall
+EnableFrameSkip                  1              # Enable Frame Skip
+MaxQp                            51             # maximum quant
+MinQp                            0              # minimum quant
+#============================== DENOISE CONTROL ==============================
+EnableDenoise                    0              # Enable Denoise (1: enable, 0: disable)
+
+#============================== SCENE CHANGE DETECTION CONTROL =======================
+EnableSceneChangeDetection       1              # Enable Scene Change Detection (1: enable, 0: disable)
+
+#============================== BACKGROUND DETECTION CONTROL ==============================
+EnableBackgroundDetection        1              # BGD control(1: enable, 0: disable)
+
+#============================== ADAPTIVE QUANTIZATION CONTROL =======================
+EnableAdaptiveQuantization       1              # Enable Adaptive Quantization (1: enable, 0: disable)
+
+#============================== LONG TERM REFERENCE CONTROL ==============================
+EnableLongTermReference          0              # Enable Long Term Reference (1: enable, 0: disable)
+LtrMarkPeriod                    30             # Long Term Reference Marking Period
+
+#============================== LAYER DEFINITION ==============================
+PrefixNALAddingCtrl              0              # Control flag of adding prefix unit (0: off, 1: on)
+                                                # It shall always be on in SVC contexts (i.e. when there are CGS/MGS/spatial enhancement layers)
+                                                # Can be disabled when no inter spatial layer prediction in case of its value as 0
+//NumLayers                        1              # Number of layers
+//LayerCfg                         layer0.cfg     # Layer 0 configuration file
+//LayerCfg                         layer1.cfg     # Layer 1 configuration file
+//LayerCfg                         layer2.cfg     # Layer 2 configuration file