@scrypted/arlo 0.11.24 → 0.11.26

package/venv/lib/python3.10/site-packages/cffi/_embedding.h

@@ -0,0 +1,550 @@
+
+/***** Support code for embedding *****/
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+#if defined(_WIN32)
+#  define CFFI_DLLEXPORT  __declspec(dllexport)
+#elif defined(__GNUC__)
+#  define CFFI_DLLEXPORT  __attribute__((visibility("default")))
+#else
+#  define CFFI_DLLEXPORT  /* nothing */
+#endif
+
+
+/* There are two global variables of type _cffi_call_python_fnptr:
+
+   * _cffi_call_python, which we declare just below, is the one called
+     by ``extern "Python"`` implementations.
+
+   * _cffi_call_python_org, which on CPython is actually part of the
+     _cffi_exports[] array, is the function pointer copied from
+     _cffi_backend.  If _cffi_start_python() fails, then this is set
+     to NULL; otherwise, it should never be NULL.
+
+   After initialization is complete, both are equal.  However, the
+   first one remains equal to &_cffi_start_and_call_python until the
+   very end of initialization, when we are (or should be) sure that
+   concurrent threads also see a completely initialized world, and
+   only then is it changed.
+*/
+#undef _cffi_call_python
+typedef void (*_cffi_call_python_fnptr)(struct _cffi_externpy_s *, char *);
+static void _cffi_start_and_call_python(struct _cffi_externpy_s *, char *);
+static _cffi_call_python_fnptr _cffi_call_python = &_cffi_start_and_call_python;
+
+
+#ifndef _MSC_VER
+   /* --- Assuming a GCC not infinitely old --- */
+# define cffi_compare_and_swap(l,o,n)  __sync_bool_compare_and_swap(l,o,n)
+# define cffi_write_barrier()          __sync_synchronize()
+# if !defined(__amd64__) && !defined(__x86_64__) &&   \
+     !defined(__i386__) && !defined(__i386)
+#   define cffi_read_barrier()         __sync_synchronize()
+# else
+#   define cffi_read_barrier()         (void)0
+# endif
+#else
+   /* --- Windows threads version --- */
+# include <Windows.h>
+# define cffi_compare_and_swap(l,o,n) \
+                               (InterlockedCompareExchangePointer(l,n,o) == (o))
+# define cffi_write_barrier()       InterlockedCompareExchange(&_cffi_dummy,0,0)
+# define cffi_read_barrier()           (void)0
+static volatile LONG _cffi_dummy;
+#endif
+
+#ifdef WITH_THREAD
+# ifndef _MSC_VER
+#  include <pthread.h>
+   static pthread_mutex_t _cffi_embed_startup_lock;
+# else
+   static CRITICAL_SECTION _cffi_embed_startup_lock;
+# endif
+  static char _cffi_embed_startup_lock_ready = 0;
+#endif
+
+static void _cffi_acquire_reentrant_mutex(void)
+{
+    static void *volatile lock = NULL;
+
+    while (!cffi_compare_and_swap(&lock, NULL, (void *)1)) {
+        /* should ideally do a spin loop instruction here, but
+           hard to do it portably and doesn't really matter I
+           think: pthread_mutex_init() should be very fast, and
+           this is only run at start-up anyway. */
+    }
+
+#ifdef WITH_THREAD
+    if (!_cffi_embed_startup_lock_ready) {
+# ifndef _MSC_VER
+        pthread_mutexattr_t attr;
+        pthread_mutexattr_init(&attr);
+        pthread_mutexattr_settype(&attr, PTHREAD_MUTEX_RECURSIVE);
+        pthread_mutex_init(&_cffi_embed_startup_lock, &attr);
+# else
+        InitializeCriticalSection(&_cffi_embed_startup_lock);
+# endif
+        _cffi_embed_startup_lock_ready = 1;
+    }
+#endif
+
+    while (!cffi_compare_and_swap(&lock, (void *)1, NULL))
+        ;
+
+#ifndef _MSC_VER
+    pthread_mutex_lock(&_cffi_embed_startup_lock);
+#else
+    EnterCriticalSection(&_cffi_embed_startup_lock);
+#endif
+}
+
+static void _cffi_release_reentrant_mutex(void)
+{
+#ifndef _MSC_VER
+    pthread_mutex_unlock(&_cffi_embed_startup_lock);
+#else
+    LeaveCriticalSection(&_cffi_embed_startup_lock);
+#endif
+}
+
+
+/**********  CPython-specific section  **********/
+#ifndef PYPY_VERSION
+
+#include "_cffi_errors.h"
+
+
+#define _cffi_call_python_org  _cffi_exports[_CFFI_CPIDX]
+
+PyMODINIT_FUNC _CFFI_PYTHON_STARTUP_FUNC(void);   /* forward */
+
+static void _cffi_py_initialize(void)
+{
+    /* XXX use initsigs=0, which "skips initialization registration of
+       signal handlers, which might be useful when Python is
+       embedded" according to the Python docs.  But review and think
+       if it should be a user-controllable setting.
+
+       XXX we should also give a way to write errors to a buffer
+       instead of to stderr.
+
+       XXX if importing 'site' fails, CPython (any version) calls
+       exit().  Should we try to work around this behavior here?
+    */
+    Py_InitializeEx(0);
+}
+
+static int _cffi_initialize_python(void)
+{
+    /* This initializes Python, imports _cffi_backend, and then the
+       present .dll/.so is set up as a CPython C extension module.
+    */
+    int result;
+    PyGILState_STATE state;
+    PyObject *pycode=NULL, *global_dict=NULL, *x;
+    PyObject *builtins;
+
+    state = PyGILState_Ensure();
+
+    /* Call the initxxx() function from the present module.  It will
+       create and initialize us as a CPython extension module, instead
+       of letting the startup Python code do it---it might reimport
+       the same .dll/.so and get maybe confused on some platforms.
+       It might also have troubles locating the .dll/.so again for all
+       I know.
+    */
+    (void)_CFFI_PYTHON_STARTUP_FUNC();
+    if (PyErr_Occurred())
+        goto error;
+
+    /* Now run the Python code provided to ffi.embedding_init_code().
+     */
+    pycode = Py_CompileString(_CFFI_PYTHON_STARTUP_CODE,
+                              "<init code for '" _CFFI_MODULE_NAME "'>",
+                              Py_file_input);
+    if (pycode == NULL)
+        goto error;
+    global_dict = PyDict_New();
+    if (global_dict == NULL)
+        goto error;
+    builtins = PyEval_GetBuiltins();
+    if (builtins == NULL)
+        goto error;
+    if (PyDict_SetItemString(global_dict, "__builtins__", builtins) < 0)
+        goto error;
+    x = PyEval_EvalCode(
+#if PY_MAJOR_VERSION < 3
+                        (PyCodeObject *)
+#endif
+                        pycode, global_dict, global_dict);
+    if (x == NULL)
+        goto error;
+    Py_DECREF(x);
+
+    /* Done!  Now if we've been called from
+       _cffi_start_and_call_python() in an ``extern "Python"``, we can
+       only hope that the Python code did correctly set up the
+       corresponding @ffi.def_extern() function.  Otherwise, the
+       general logic of ``extern "Python"`` functions (inside the
+       _cffi_backend module) will find that the reference is still
+       missing and print an error.
+     */
+    result = 0;
+ done:
+    Py_XDECREF(pycode);
+    Py_XDECREF(global_dict);
+    PyGILState_Release(state);
+    return result;
+
+ error:;
+    {
+        /* Print as much information as potentially useful.
+           Debugging load-time failures with embedding is not fun
+        */
+        PyObject *ecap;
+        PyObject *exception, *v, *tb, *f, *modules, *mod;
+        PyErr_Fetch(&exception, &v, &tb);
+        ecap = _cffi_start_error_capture();
+        f = PySys_GetObject((char *)"stderr");
+        if (f != NULL && f != Py_None) {
+            PyFile_WriteString(
+                "Failed to initialize the Python-CFFI embedding logic:\n\n", f);
+        }
+
+        if (exception != NULL) {
+            PyErr_NormalizeException(&exception, &v, &tb);
+            PyErr_Display(exception, v, tb);
+        }
+        Py_XDECREF(exception);
+        Py_XDECREF(v);
+        Py_XDECREF(tb);
+
+        if (f != NULL && f != Py_None) {
+            PyFile_WriteString("\nFrom: " _CFFI_MODULE_NAME
+                               "\ncompiled with cffi version: 1.17.1"
+                               "\n_cffi_backend module: ", f);
+            modules = PyImport_GetModuleDict();
+            mod = PyDict_GetItemString(modules, "_cffi_backend");
+            if (mod == NULL) {
+                PyFile_WriteString("not loaded", f);
+            }
+            else {
+                v = PyObject_GetAttrString(mod, "__file__");
+                PyFile_WriteObject(v, f, 0);
+                Py_XDECREF(v);
+            }
+            PyFile_WriteString("\nsys.path: ", f);
+            PyFile_WriteObject(PySys_GetObject((char *)"path"), f, 0);
+            PyFile_WriteString("\n\n", f);
+        }
+        _cffi_stop_error_capture(ecap);
+    }
+    result = -1;
+    goto done;
+}
+
+#if PY_VERSION_HEX < 0x03080000
+PyAPI_DATA(char *) _PyParser_TokenNames[];  /* from CPython */
+#endif
+
+static int _cffi_carefully_make_gil(void)
+{
+    /* This does the basic initialization of Python.  It can be called
+       completely concurrently from unrelated threads.  It assumes
+       that we don't hold the GIL before (if it exists), and we don't
+       hold it afterwards.
+
+       (What it really does used to be completely different in Python 2
+       and Python 3, with the Python 2 solution avoiding the spin-lock
+       around the Py_InitializeEx() call.  However, after recent changes
+       to CPython 2.7 (issue #358) it no longer works.  So we use the
+       Python 3 solution everywhere.)
+
+       This initializes Python by calling Py_InitializeEx().
+       Important: this must not be called concurrently at all.
+       So we use a global variable as a simple spin lock.  This global
+       variable must be from 'libpythonX.Y.so', not from this
+       cffi-based extension module, because it must be shared from
+       different cffi-based extension modules.
+
+       In Python < 3.8, we choose
+       _PyParser_TokenNames[0] as a completely arbitrary pointer value
+       that is never written to.  The default is to point to the
+       string "ENDMARKER".  We change it temporarily to point to the
+       next character in that string.  (Yes, I know it's REALLY
+       obscure.)
+
+       In Python >= 3.8, this string array is no longer writable, so
+       instead we pick PyCapsuleType.tp_version_tag.  We can't change
+       Python < 3.8 because someone might use a mixture of cffi
+       embedded modules, some of which were compiled before this file
+       changed.
+
+       In Python >= 3.12, this stopped working because that particular
+       tp_version_tag gets modified during interpreter startup.  It's
+       arguably a bad idea before 3.12 too, but again we can't change
+       that because someone might use a mixture of cffi embedded
+       modules, and no-one reported a bug so far.  In Python >= 3.12
+       we go instead for PyCapsuleType.tp_as_buffer, which is supposed
+       to always be NULL.  We write to it temporarily a pointer to
+       a struct full of NULLs, which is semantically the same.
+    */
+
+#ifdef WITH_THREAD
+# if PY_VERSION_HEX < 0x03080000
+    char *volatile *lock = (char *volatile *)_PyParser_TokenNames;
+    char *old_value, *locked_value;
+
+    while (1) {    /* spin loop */
+        old_value = *lock;
+        locked_value = old_value + 1;
+        if (old_value[0] == 'E') {
+            assert(old_value[1] == 'N');
+            if (cffi_compare_and_swap(lock, old_value, locked_value))
+                break;
+        }
+        else {
+            assert(old_value[0] == 'N');
+            /* should ideally do a spin loop instruction here, but
+               hard to do it portably and doesn't really matter I
+               think: PyEval_InitThreads() should be very fast, and
+               this is only run at start-up anyway. */
+        }
+    }
+# else
+#  if PY_VERSION_HEX < 0x030C0000
+    int volatile *lock = (int volatile *)&PyCapsule_Type.tp_version_tag;
+    int old_value, locked_value = -42;
+    assert(!(PyCapsule_Type.tp_flags & Py_TPFLAGS_HAVE_VERSION_TAG));
+#  else
+    static struct ebp_s { PyBufferProcs buf; int mark; } empty_buffer_procs;
+    empty_buffer_procs.mark = -42;
+    PyBufferProcs *volatile *lock = (PyBufferProcs *volatile *)
+        &PyCapsule_Type.tp_as_buffer;
+    PyBufferProcs *old_value, *locked_value = &empty_buffer_procs.buf;
+#  endif
+
+    while (1) {    /* spin loop */
+        old_value = *lock;
+        if (old_value == 0) {
+            if (cffi_compare_and_swap(lock, old_value, locked_value))
+                break;
+        }
+        else {
+#  if PY_VERSION_HEX < 0x030C0000
+            assert(old_value == locked_value);
+#  else
+            /* The pointer should point to a possibly different
+               empty_buffer_procs from another C extension module */
+            assert(((struct ebp_s *)old_value)->mark == -42);
+#  endif
+            /* should ideally do a spin loop instruction here, but
+               hard to do it portably and doesn't really matter I
+               think: PyEval_InitThreads() should be very fast, and
+               this is only run at start-up anyway. */
+        }
+    }
+# endif
+#endif
+
+    /* call Py_InitializeEx() */
+    if (!Py_IsInitialized()) {
+        _cffi_py_initialize();
+#if PY_VERSION_HEX < 0x03070000
+        PyEval_InitThreads();
+#endif
+        PyEval_SaveThread();  /* release the GIL */
+        /* the returned tstate must be the one that has been stored into the
+           autoTLSkey by _PyGILState_Init() called from Py_Initialize(). */
+    }
+    else {
+#if PY_VERSION_HEX < 0x03070000
+        /* PyEval_InitThreads() is always a no-op from CPython 3.7 */
+        PyGILState_STATE state = PyGILState_Ensure();
+        PyEval_InitThreads();
+        PyGILState_Release(state);
+#endif
+    }
+
+#ifdef WITH_THREAD
+    /* release the lock */
+    while (!cffi_compare_and_swap(lock, locked_value, old_value))
+        ;
+#endif
+
+    return 0;
+}
+
+/**********  end CPython-specific section  **********/
+
+
+#else
+
+
+/**********  PyPy-specific section  **********/
+
+PyMODINIT_FUNC _CFFI_PYTHON_STARTUP_FUNC(const void *[]);   /* forward */
+
+static struct _cffi_pypy_init_s {
+    const char *name;
+    void *func;    /* function pointer */
+    const char *code;
+} _cffi_pypy_init = {
+    _CFFI_MODULE_NAME,
+    _CFFI_PYTHON_STARTUP_FUNC,
+    _CFFI_PYTHON_STARTUP_CODE,
+};
+
+extern int pypy_carefully_make_gil(const char *);
+extern int pypy_init_embedded_cffi_module(int, struct _cffi_pypy_init_s *);
+
+static int _cffi_carefully_make_gil(void)
+{
+    return pypy_carefully_make_gil(_CFFI_MODULE_NAME);
+}
+
+static int _cffi_initialize_python(void)
+{
+    return pypy_init_embedded_cffi_module(0xB011, &_cffi_pypy_init);
+}
+
+/**********  end PyPy-specific section  **********/
+
+
+#endif
+
+
+#ifdef __GNUC__
+__attribute__((noinline))
+#endif
+static _cffi_call_python_fnptr _cffi_start_python(void)
+{
+    /* Delicate logic to initialize Python.  This function can be
+       called multiple times concurrently, e.g. when the process calls
+       its first ``extern "Python"`` functions in multiple threads at
+       once.  It can also be called recursively, in which case we must
+       ignore it.  We also have to consider what occurs if several
+       different cffi-based extensions reach this code in parallel
+       threads---it is a different copy of the code, then, and we
+       can't have any shared global variable unless it comes from
+       'libpythonX.Y.so'.
+
+       Idea:
+
+       * _cffi_carefully_make_gil(): "carefully" call
+         PyEval_InitThreads() (possibly with Py_InitializeEx() first).
+
+       * then we use a (local) custom lock to make sure that a call to this
+         cffi-based extension will wait if another call to the *same*
+         extension is running the initialization in another thread.
+         It is reentrant, so that a recursive call will not block, but
+         only one from a different thread.
+
+       * then we grab the GIL and (Python 2) we call Py_InitializeEx().
+         At this point, concurrent calls to Py_InitializeEx() are not
+         possible: we have the GIL.
+
+       * do the rest of the specific initialization, which may
+         temporarily release the GIL but not the custom lock.
+         Only release the custom lock when we are done.
+    */
+    static char called = 0;
+
+    if (_cffi_carefully_make_gil() != 0)
+        return NULL;
+
+    _cffi_acquire_reentrant_mutex();
+
+    /* Here the GIL exists, but we don't have it.  We're only protected
+       from concurrency by the reentrant mutex. */
+
+    /* This file only initializes the embedded module once, the first
+       time this is called, even if there are subinterpreters. */
+    if (!called) {
+        called = 1;  /* invoke _cffi_initialize_python() only once,
+                        but don't set '_cffi_call_python' right now,
+                        otherwise concurrent threads won't call
+                        this function at all (we need them to wait) */
+        if (_cffi_initialize_python() == 0) {
+            /* now initialization is finished.  Switch to the fast-path. */
+
+            /* We would like nobody to see the new value of
+               '_cffi_call_python' without also seeing the rest of the
+               data initialized.  However, this is not possible.  But
+               the new value of '_cffi_call_python' is the function
+               'cffi_call_python()' from _cffi_backend.  So:  */
+            cffi_write_barrier();
+            /* ^^^ we put a write barrier here, and a corresponding
+               read barrier at the start of cffi_call_python().  This
+               ensures that after that read barrier, we see everything
+               done here before the write barrier.
+            */
+
+            assert(_cffi_call_python_org != NULL);
+            _cffi_call_python = (_cffi_call_python_fnptr)_cffi_call_python_org;
+        }
+        else {
+            /* initialization failed.  Reset this to NULL, even if it was
+               already set to some other value.  Future calls to
+               _cffi_start_python() are still forced to occur, and will
+               always return NULL from now on. */
+            _cffi_call_python_org = NULL;
+        }
+    }
+
+    _cffi_release_reentrant_mutex();
+
+    return (_cffi_call_python_fnptr)_cffi_call_python_org;
+}
+
+static
+void _cffi_start_and_call_python(struct _cffi_externpy_s *externpy, char *args)
+{
+    _cffi_call_python_fnptr fnptr;
+    int current_err = errno;
+#ifdef _MSC_VER
+    int current_lasterr = GetLastError();
+#endif
+    fnptr = _cffi_start_python();
+    if (fnptr == NULL) {
+        fprintf(stderr, "function %s() called, but initialization code "
+                        "failed.  Returning 0.\n", externpy->name);
+        memset(args, 0, externpy->size_of_result);
+    }
+#ifdef _MSC_VER
+    SetLastError(current_lasterr);
+#endif
+    errno = current_err;
+
+    if (fnptr != NULL)
+        fnptr(externpy, args);
+}
+
+
+/* The cffi_start_python() function makes sure Python is initialized
+   and our cffi module is set up.  It can be called manually from the
+   user C code.  The same effect is obtained automatically from any
+   dll-exported ``extern "Python"`` function.  This function returns
+   -1 if initialization failed, 0 if all is OK.  */
+_CFFI_UNUSED_FN
+static int cffi_start_python(void)
+{
+    if (_cffi_call_python == &_cffi_start_and_call_python) {
+        if (_cffi_start_python() == NULL)
+            return -1;
+    }
+    cffi_read_barrier();
+    return 0;
+}
+
+#undef cffi_compare_and_swap
+#undef cffi_write_barrier
+#undef cffi_read_barrier
+
+#ifdef __cplusplus
+}
+#endif

package/venv/lib/python3.10/site-packages/cffi/_imp_emulation.py

@@ -0,0 +1,83 @@
+
+try:
+    # this works on Python < 3.12
+    from imp import *
+
+except ImportError:
+    # this is a limited emulation for Python >= 3.12.
+    # Note that this is used only for tests or for the old ffi.verify().
+    # This is copied from the source code of Python 3.11.
+
+    from _imp import (acquire_lock, release_lock,
+                      is_builtin, is_frozen)
+
+    from importlib._bootstrap import _load
+
+    from importlib import machinery
+    import os
+    import sys
+    import tokenize
+
+    SEARCH_ERROR = 0
+    PY_SOURCE = 1
+    PY_COMPILED = 2
+    C_EXTENSION = 3
+    PY_RESOURCE = 4
+    PKG_DIRECTORY = 5
+    C_BUILTIN = 6
+    PY_FROZEN = 7
+    PY_CODERESOURCE = 8
+    IMP_HOOK = 9
+
+    def get_suffixes():
+        extensions = [(s, 'rb', C_EXTENSION)
+                      for s in machinery.EXTENSION_SUFFIXES]
+        source = [(s, 'r', PY_SOURCE) for s in machinery.SOURCE_SUFFIXES]
+        bytecode = [(s, 'rb', PY_COMPILED) for s in machinery.BYTECODE_SUFFIXES]
+        return extensions + source + bytecode
+
+    def find_module(name, path=None):
+        if not isinstance(name, str):
+            raise TypeError("'name' must be a str, not {}".format(type(name)))
+        elif not isinstance(path, (type(None), list)):
+            # Backwards-compatibility
+            raise RuntimeError("'path' must be None or a list, "
+                               "not {}".format(type(path)))
+
+        if path is None:
+            if is_builtin(name):
+                return None, None, ('', '', C_BUILTIN)
+            elif is_frozen(name):
+                return None, None, ('', '', PY_FROZEN)
+            else:
+                path = sys.path
+
+        for entry in path:
+            package_directory = os.path.join(entry, name)
+            for suffix in ['.py', machinery.BYTECODE_SUFFIXES[0]]:
+                package_file_name = '__init__' + suffix
+                file_path = os.path.join(package_directory, package_file_name)
+                if os.path.isfile(file_path):
+                    return None, package_directory, ('', '', PKG_DIRECTORY)
+            for suffix, mode, type_ in get_suffixes():
+                file_name = name + suffix
+                file_path = os.path.join(entry, file_name)
+                if os.path.isfile(file_path):
+                    break
+            else:
+                continue
+            break  # Break out of outer loop when breaking out of inner loop.
+        else:
+            raise ImportError(name, name=name)
+
+        encoding = None
+        if 'b' not in mode:
+            with open(file_path, 'rb') as file:
+                encoding = tokenize.detect_encoding(file.readline)[0]
+        file = open(file_path, mode, encoding=encoding)
+        return file, file_path, (suffix, mode, type_)
+
+    def load_dynamic(name, path, file=None):
+        loader = machinery.ExtensionFileLoader(name, path)
+        spec = machinery.ModuleSpec(name=name, loader=loader, origin=path)
+        return _load(spec)

package/venv/lib/python3.10/site-packages/cffi/_shimmed_dist_utils.py

@@ -0,0 +1,45 @@
+"""
+Temporary shim module to indirect the bits of distutils we need from setuptools/distutils while providing useful
+error messages beyond `No module named 'distutils' on Python >= 3.12, or when setuptools' vendored distutils is broken.
+
+This is a compromise to avoid a hard-dep on setuptools for Python >= 3.12, since many users don't need runtime compilation support from CFFI.
+"""
+import sys
+
+try:
+    # import setuptools first; this is the most robust way to ensure its embedded distutils is available
+    # (the .pth shim should usually work, but this is even more robust)
+    import setuptools
+except Exception as ex:
+    if sys.version_info >= (3, 12):
+        # Python 3.12 has no built-in distutils to fall back on, so any import problem is fatal
+        raise Exception("This CFFI feature requires setuptools on Python >= 3.12. The setuptools module is missing or non-functional.") from ex
+
+    # silently ignore on older Pythons (support fallback to stdlib distutils where available)
+else:
+    del setuptools
+
+try:
+    # bring in just the bits of distutils we need, whether they really came from setuptools or stdlib-embedded distutils
+    from distutils import log, sysconfig
+    from distutils.ccompiler import CCompiler
+    from distutils.command.build_ext import build_ext
+    from distutils.core import Distribution, Extension
+    from distutils.dir_util import mkpath
+    from distutils.errors import DistutilsSetupError, CompileError, LinkError
+    from distutils.log import set_threshold, set_verbosity
+
+    if sys.platform == 'win32':
+        try:
+            # FUTURE: msvc9compiler module was removed in setuptools 74; consider removing, as it's only used by an ancient patch in `recompiler`
+            from distutils.msvc9compiler import MSVCCompiler
+        except ImportError:
+            MSVCCompiler = None
+except Exception as ex:
+    if sys.version_info >= (3, 12):
+        raise Exception("This CFFI feature requires setuptools on Python >= 3.12. Please install the setuptools package.") from ex
+
+    # anything older, just let the underlying distutils import error fly
+    raise Exception("This CFFI feature requires distutils. Please install the distutils or setuptools package.") from ex
+
+del sys