@scriptc/cli-darwin-x64 0.0.0 → 0.2.0

package/dist/lib/runtime-sources/vendor/mbedtls/library/mps_reader.c

@@ -0,0 +1,538 @@
+/*
+ *  Message Processing Stack, Reader implementation
+ *
+ *  Copyright The Mbed TLS Contributors
+ *  SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
+ */
+
+#include "common.h"
+
+#if defined(MBEDTLS_SSL_PROTO_TLS1_3)
+
+#include "mps_reader.h"
+#include "mps_common.h"
+#include "mps_trace.h"
+
+#include <string.h>
+
+#if defined(MBEDTLS_MPS_ENABLE_TRACE)
+static int mbedtls_mps_trace_id = MBEDTLS_MPS_TRACE_BIT_READER;
+#endif /* MBEDTLS_MPS_ENABLE_TRACE */
+
+/*
+ * GENERAL NOTE ON CODING STYLE
+ *
+ * The following code intentionally separates memory loads
+ * and stores from other operations (arithmetic or branches).
+ * This leads to the introduction of many local variables
+ * and significantly increases the C-code line count, but
+ * should not increase the size of generated assembly.
+ *
+ * The reason for this is twofold:
+ * (1) It will ease verification efforts using the VST
+ *     (Verified Software Toolchain)
+ *     whose program logic cannot directly reason
+ *     about instructions containing a load or store in
+ *     addition to other operations (e.g. *p = *q or
+ *     tmp = *p + 42).
+ * (2) Operating on local variables and writing the results
+ *     back to the target contexts on success only
+ *     allows to maintain structure invariants even
+ *     on failure - this in turn has two benefits:
+ *     (2.a) If for some reason an error code is not caught
+ *           and operation continues, functions are nonetheless
+ *           called with sane contexts, reducing the risk
+ *           of dangerous behavior.
+ *     (2.b) Randomized testing is easier if structures
+ *           remain intact even in the face of failing
+ *           and/or non-sensical calls.
+ *     Moreover, it might even reduce code-size because
+ *     the compiler need not write back temporary results
+ *     to memory in case of failure.
+ *
+ */
+
+static inline int mps_reader_is_accumulating(
+    mbedtls_mps_reader const *rd)
+{
+    mbedtls_mps_size_t acc_remaining;
+    if (rd->acc == NULL) {
+        return 0;
+    }
+
+    acc_remaining = rd->acc_share.acc_remaining;
+    return acc_remaining > 0;
+}
+
+static inline int mps_reader_is_producing(
+    mbedtls_mps_reader const *rd)
+{
+    unsigned char *frag = rd->frag;
+    return frag == NULL;
+}
+
+static inline int mps_reader_is_consuming(
+    mbedtls_mps_reader const *rd)
+{
+    return !mps_reader_is_producing(rd);
+}
+
+static inline mbedtls_mps_size_t mps_reader_get_fragment_offset(
+    mbedtls_mps_reader const *rd)
+{
+    unsigned char *acc = rd->acc;
+    mbedtls_mps_size_t frag_offset;
+
+    if (acc == NULL) {
+        return 0;
+    }
+
+    frag_offset = rd->acc_share.frag_offset;
+    return frag_offset;
+}
+
+static inline mbedtls_mps_size_t mps_reader_serving_from_accumulator(
+    mbedtls_mps_reader const *rd)
+{
+    mbedtls_mps_size_t frag_offset, end;
+
+    frag_offset = mps_reader_get_fragment_offset(rd);
+    end = rd->end;
+
+    return end < frag_offset;
+}
+
+static inline void mps_reader_zero(mbedtls_mps_reader *rd)
+{
+    /* A plain memset() would likely be more efficient,
+     * but the current way of zeroing makes it harder
+     * to overlook fields which should not be zero-initialized.
+     * It's also more suitable for FV efforts since it
+     * doesn't require reasoning about structs being
+     * interpreted as unstructured binary blobs. */
+    static mbedtls_mps_reader const zero =
+    { .frag          = NULL,
+      .frag_len      = 0,
+      .commit        = 0,
+      .end           = 0,
+      .pending       = 0,
+      .acc           = NULL,
+      .acc_len       = 0,
+      .acc_available = 0,
+      .acc_share     = { .acc_remaining = 0 } };
+    *rd = zero;
+}
+
+int mbedtls_mps_reader_init(mbedtls_mps_reader *rd,
+                            unsigned char *acc,
+                            mbedtls_mps_size_t acc_len)
+{
+    MBEDTLS_MPS_TRACE_INIT("mbedtls_mps_reader_init");
+    MBEDTLS_MPS_TRACE(MBEDTLS_MPS_TRACE_TYPE_COMMENT,
+                      "* Accumulator size: %u bytes", (unsigned) acc_len);
+    mps_reader_zero(rd);
+    rd->acc = acc;
+    rd->acc_len = acc_len;
+    MBEDTLS_MPS_TRACE_RETURN(0);
+}
+
+int mbedtls_mps_reader_free(mbedtls_mps_reader *rd)
+{
+    MBEDTLS_MPS_TRACE_INIT("mbedtls_mps_reader_free");
+    mps_reader_zero(rd);
+    MBEDTLS_MPS_TRACE_RETURN(0);
+}
+
+int mbedtls_mps_reader_feed(mbedtls_mps_reader *rd,
+                            unsigned char *new_frag,
+                            mbedtls_mps_size_t new_frag_len)
+{
+    mbedtls_mps_size_t copy_to_acc;
+    MBEDTLS_MPS_TRACE_INIT("mbedtls_mps_reader_feed");
+    MBEDTLS_MPS_TRACE(MBEDTLS_MPS_TRACE_TYPE_COMMENT,
+                      "* Fragment length: %u bytes", (unsigned) new_frag_len);
+
+    if (new_frag == NULL) {
+        MBEDTLS_MPS_TRACE_RETURN(MBEDTLS_ERR_MPS_READER_INVALID_ARG);
+    }
+
+    MBEDTLS_MPS_STATE_VALIDATE_RAW(mps_reader_is_producing(
+                                       rd),
+                                   "mbedtls_mps_reader_feed() requires reader to be in producing mode");
+
+    if (mps_reader_is_accumulating(rd)) {
+        unsigned char *acc    = rd->acc;
+        mbedtls_mps_size_t acc_remaining = rd->acc_share.acc_remaining;
+        mbedtls_mps_size_t acc_available = rd->acc_available;
+
+        /* Skip over parts of the accumulator that have already been filled. */
+        acc += acc_available;
+
+        copy_to_acc = acc_remaining;
+        if (copy_to_acc > new_frag_len) {
+            copy_to_acc = new_frag_len;
+        }
+
+        /* Copy new contents to accumulator. */
+        memcpy(acc, new_frag, copy_to_acc);
+
+        MBEDTLS_MPS_TRACE(MBEDTLS_MPS_TRACE_TYPE_COMMENT,
+                          "Copy new data of size %u of %u into accumulator at offset %u",
+                          (unsigned) copy_to_acc, (unsigned) new_frag_len,
+                          (unsigned) acc_available);
+
+        /* Check if, with the new fragment, we have enough data. */
+        acc_remaining -= copy_to_acc;
+        if (acc_remaining > 0) {
+            /* We need to accumulate more data. Stay in producing mode. */
+            acc_available += copy_to_acc;
+            rd->acc_share.acc_remaining = acc_remaining;
+            rd->acc_available = acc_available;
+            MBEDTLS_MPS_TRACE_RETURN(MBEDTLS_ERR_MPS_READER_NEED_MORE);
+        }
+
+        /* We have filled the accumulator: Move to consuming mode. */
+
+        MBEDTLS_MPS_TRACE(MBEDTLS_MPS_TRACE_TYPE_COMMENT,
+                          "Enough data available to serve user request");
+
+        /* Remember overlap of accumulator and fragment. */
+        rd->acc_share.frag_offset = acc_available;
+        acc_available += copy_to_acc;
+        rd->acc_available = acc_available;
+    } else { /* Not accumulating */
+        rd->acc_share.frag_offset = 0;
+    }
+
+    rd->frag = new_frag;
+    rd->frag_len = new_frag_len;
+    rd->commit = 0;
+    rd->end = 0;
+    MBEDTLS_MPS_TRACE_RETURN(0);
+}
+
+
+int mbedtls_mps_reader_get(mbedtls_mps_reader *rd,
+                           mbedtls_mps_size_t desired,
+                           unsigned char **buffer,
+                           mbedtls_mps_size_t *buflen)
+{
+    unsigned char *frag;
+    mbedtls_mps_size_t frag_len, frag_offset, end, frag_fetched, frag_remaining;
+    MBEDTLS_MPS_TRACE_INIT("mbedtls_mps_reader_get");
+    MBEDTLS_MPS_TRACE(MBEDTLS_MPS_TRACE_TYPE_COMMENT,
+                      "* Bytes requested: %u", (unsigned) desired);
+
+    MBEDTLS_MPS_STATE_VALIDATE_RAW(mps_reader_is_consuming(
+                                       rd),
+                                   "mbedtls_mps_reader_get() requires reader to be in consuming mode");
+
+    end = rd->end;
+    frag_offset = mps_reader_get_fragment_offset(rd);
+
+    /* Check if we're still serving from the accumulator. */
+    if (mps_reader_serving_from_accumulator(rd)) {
+        /* Illustration of supported and unsupported cases:
+         *
+         * - Allowed #1
+         *
+         *                          +-----------------------------------+
+         *                          |               frag                |
+         *                          +-----------------------------------+
+         *
+         *             end end+desired
+         *              |       |
+         *        +-----v-------v-------------+
+         *        |          acc              |
+         *        +---------------------------+
+         *                          |         |
+         *                     frag_offset  acc_available
+         *
+         * - Allowed #2
+         *
+         *                          +-----------------------------------+
+         *                          |               frag                |
+         *                          +-----------------------------------+
+         *
+         *                  end          end+desired
+         *                   |                |
+         *        +----------v----------------v
+         *        |          acc              |
+         *        +---------------------------+
+         *                          |         |
+         *                   frag_offset acc_available
+         *
+         * - Not allowed #1 (could be served, but we don't actually use it):
+         *
+         *                      +-----------------------------------+
+         *                      |               frag                |
+         *                      +-----------------------------------+
+         *
+         *              end        end+desired
+         *               |             |
+         *        +------v-------------v------+
+         *        |          acc              |
+         *        +---------------------------+
+         *                      |             |
+         *                frag_offset   acc_available
+         *
+         *
+         * - Not allowed #2 (can't be served with a contiguous buffer):
+         *
+         *                      +-----------------------------------+
+         *                      |               frag                |
+         *                      +-----------------------------------+
+         *
+         *              end                 end + desired
+         *               |                        |
+         *        +------v--------------------+   v
+         *        |            acc            |
+         *        +---------------------------+
+         *                      |             |
+         *                frag_offset   acc_available
+         *
+         * In case of Allowed #2 we're switching to serve from
+         * `frag` starting from the next call to mbedtls_mps_reader_get().
+         */
+
+        unsigned char *acc;
+
+        MBEDTLS_MPS_TRACE(MBEDTLS_MPS_TRACE_TYPE_COMMENT,
+                          "Serve the request from the accumulator");
+        if (frag_offset - end < desired) {
+            mbedtls_mps_size_t acc_available;
+            acc_available = rd->acc_available;
+            if (acc_available - end != desired) {
+                /* It might be possible to serve some of these situations by
+                 * making additional space in the accumulator, removing those
+                 * parts that have already been committed.
+                 * On the other hand, this brings additional complexity and
+                 * enlarges the code size, while there doesn't seem to be a use
+                 * case where we don't attempt exactly the same `get` calls when
+                 * resuming on a reader than what we tried before pausing it.
+                 * If we believe we adhere to this restricted usage throughout
+                 * the library, this check is a good opportunity to
+                 * validate this. */
+                MBEDTLS_MPS_TRACE_RETURN(
+                    MBEDTLS_ERR_MPS_READER_INCONSISTENT_REQUESTS);
+            }
+        }
+
+        acc = rd->acc;
+        acc += end;
+
+        *buffer = acc;
+        if (buflen != NULL) {
+            *buflen = desired;
+        }
+
+        end += desired;
+        rd->end = end;
+        rd->pending = 0;
+
+        MBEDTLS_MPS_TRACE_RETURN(0);
+    }
+
+    /* Attempt to serve the request from the current fragment */
+    MBEDTLS_MPS_TRACE(MBEDTLS_MPS_TRACE_TYPE_COMMENT,
+                      "Serve the request from the current fragment.");
+
+    frag_len = rd->frag_len;
+    frag_fetched = end - frag_offset; /* The amount of data from the current
+                                       * fragment that has already been passed
+                                       * to the user. */
+    frag_remaining = frag_len - frag_fetched; /* Remaining data in fragment */
+
+    /* Check if we can serve the read request from the fragment. */
+    if (frag_remaining < desired) {
+        MBEDTLS_MPS_TRACE(MBEDTLS_MPS_TRACE_TYPE_COMMENT,
+                          "There's not enough data in the current fragment "
+                          "to serve the request.");
+        /* There's not enough data in the current fragment,
+         * so either just RETURN what we have or fail. */
+        if (buflen == NULL) {
+            if (frag_remaining > 0) {
+                rd->pending = desired - frag_remaining;
+                MBEDTLS_MPS_TRACE(MBEDTLS_MPS_TRACE_TYPE_COMMENT,
+                                  "Remember to collect %u bytes before re-opening",
+                                  (unsigned) rd->pending);
+            }
+            MBEDTLS_MPS_TRACE_RETURN(MBEDTLS_ERR_MPS_READER_OUT_OF_DATA);
+        }
+
+        desired = frag_remaining;
+    }
+
+    /* There's enough data in the current fragment to serve the
+     * (potentially modified) read request. */
+
+    frag = rd->frag;
+    frag += frag_fetched;
+
+    *buffer = frag;
+    if (buflen != NULL) {
+        *buflen = desired;
+    }
+
+    end += desired;
+    rd->end = end;
+    rd->pending = 0;
+    MBEDTLS_MPS_TRACE_RETURN(0);
+}
+
+int mbedtls_mps_reader_commit(mbedtls_mps_reader *rd)
+{
+    mbedtls_mps_size_t end;
+    MBEDTLS_MPS_TRACE_INIT("mbedtls_mps_reader_commit");
+    MBEDTLS_MPS_STATE_VALIDATE_RAW(mps_reader_is_consuming(
+                                       rd),
+                                   "mbedtls_mps_reader_commit() requires reader to be in consuming mode");
+
+    end = rd->end;
+    rd->commit = end;
+
+    MBEDTLS_MPS_TRACE_RETURN(0);
+}
+
+int mbedtls_mps_reader_reclaim(mbedtls_mps_reader *rd,
+                               int *paused)
+{
+    unsigned char *frag, *acc;
+    mbedtls_mps_size_t pending, commit;
+    mbedtls_mps_size_t acc_len, frag_offset, frag_len;
+    MBEDTLS_MPS_TRACE_INIT("mbedtls_mps_reader_reclaim");
+
+    if (paused != NULL) {
+        *paused = 0;
+    }
+
+    MBEDTLS_MPS_STATE_VALIDATE_RAW(mps_reader_is_consuming(
+                                       rd),
+                                   "mbedtls_mps_reader_reclaim() requires reader to be in consuming mode");
+
+    frag     = rd->frag;
+    acc      = rd->acc;
+    pending  = rd->pending;
+    commit   = rd->commit;
+    frag_len = rd->frag_len;
+
+    frag_offset = mps_reader_get_fragment_offset(rd);
+
+    if (pending == 0) {
+        MBEDTLS_MPS_TRACE(MBEDTLS_MPS_TRACE_TYPE_COMMENT,
+                          "No unsatisfied read-request has been logged.");
+
+        /* Check if there's data left to be consumed. */
+        if (commit < frag_offset || commit - frag_offset < frag_len) {
+            MBEDTLS_MPS_TRACE(MBEDTLS_MPS_TRACE_TYPE_COMMENT,
+                              "There is data left to be consumed.");
+            rd->end = commit;
+            MBEDTLS_MPS_TRACE_RETURN(MBEDTLS_ERR_MPS_READER_DATA_LEFT);
+        }
+
+        rd->acc_available = 0;
+        rd->acc_share.acc_remaining = 0;
+
+        MBEDTLS_MPS_TRACE(MBEDTLS_MPS_TRACE_TYPE_COMMENT,
+                          "Fragment has been fully processed and committed.");
+    } else {
+        int overflow;
+
+        mbedtls_mps_size_t acc_backup_offset;
+        mbedtls_mps_size_t acc_backup_len;
+        mbedtls_mps_size_t frag_backup_offset;
+        mbedtls_mps_size_t frag_backup_len;
+
+        mbedtls_mps_size_t backup_len;
+        mbedtls_mps_size_t acc_len_needed;
+
+        MBEDTLS_MPS_TRACE(MBEDTLS_MPS_TRACE_TYPE_COMMENT,
+                          "There has been an unsatisfied read with %u bytes overhead.",
+                          (unsigned) pending);
+
+        if (acc == NULL) {
+            MBEDTLS_MPS_TRACE(MBEDTLS_MPS_TRACE_TYPE_COMMENT,
+                              "No accumulator present");
+            MBEDTLS_MPS_TRACE_RETURN(
+                MBEDTLS_ERR_MPS_READER_NEED_ACCUMULATOR);
+        }
+        acc_len = rd->acc_len;
+
+        /* Check if the upper layer has already fetched
+         * and committed the contents of the accumulator. */
+        if (commit < frag_offset) {
+            /* No, accumulator is still being processed. */
+            frag_backup_offset = 0;
+            frag_backup_len = frag_len;
+            acc_backup_offset = commit;
+            acc_backup_len = frag_offset - commit;
+        } else {
+            /* Yes, the accumulator is already processed. */
+            frag_backup_offset = commit - frag_offset;
+            frag_backup_len = frag_len - frag_backup_offset;
+            acc_backup_offset = 0;
+            acc_backup_len = 0;
+        }
+
+        backup_len = acc_backup_len + frag_backup_len;
+        acc_len_needed = backup_len + pending;
+
+        overflow  = 0;
+        overflow |= (backup_len     < acc_backup_len);
+        overflow |= (acc_len_needed < backup_len);
+
+        if (overflow || acc_len < acc_len_needed) {
+            /* Except for the different return code, we behave as if
+             * there hadn't been a call to mbedtls_mps_reader_get()
+             * since the last commit. */
+            rd->end = commit;
+            rd->pending = 0;
+            MBEDTLS_MPS_TRACE(MBEDTLS_MPS_TRACE_TYPE_ERROR,
+                              "The accumulator is too small to handle the backup.");
+            MBEDTLS_MPS_TRACE(MBEDTLS_MPS_TRACE_TYPE_ERROR,
+                              "* Size: %u", (unsigned) acc_len);
+            MBEDTLS_MPS_TRACE(MBEDTLS_MPS_TRACE_TYPE_ERROR,
+                              "* Needed: %u (%u + %u)",
+                              (unsigned) acc_len_needed,
+                              (unsigned) backup_len, (unsigned) pending);
+            MBEDTLS_MPS_TRACE_RETURN(
+                MBEDTLS_ERR_MPS_READER_ACCUMULATOR_TOO_SMALL);
+        }
+
+        MBEDTLS_MPS_TRACE(MBEDTLS_MPS_TRACE_TYPE_COMMENT,
+                          "Fragment backup: %u", (unsigned) frag_backup_len);
+        MBEDTLS_MPS_TRACE(MBEDTLS_MPS_TRACE_TYPE_COMMENT,
+                          "Accumulator backup: %u", (unsigned) acc_backup_len);
+
+        /* Move uncommitted parts from the accumulator to the front
+         * of the accumulator. */
+        memmove(acc, acc + acc_backup_offset, acc_backup_len);
+
+        /* Copy uncommitted parts of the current fragment to the
+         * accumulator. */
+        memcpy(acc + acc_backup_len,
+               frag + frag_backup_offset, frag_backup_len);
+
+        rd->acc_available = backup_len;
+        rd->acc_share.acc_remaining = pending;
+
+        if (paused != NULL) {
+            *paused = 1;
+        }
+    }
+
+    rd->frag     = NULL;
+    rd->frag_len = 0;
+
+    rd->commit  = 0;
+    rd->end     = 0;
+    rd->pending = 0;
+
+    MBEDTLS_MPS_TRACE(MBEDTLS_MPS_TRACE_TYPE_COMMENT,
+                      "Final state: aa %u, al %u, ar %u",
+                      (unsigned) rd->acc_available, (unsigned) rd->acc_len,
+                      (unsigned) rd->acc_share.acc_remaining);
+    MBEDTLS_MPS_TRACE_RETURN(0);
+}
+
+#endif /* MBEDTLS_SSL_PROTO_TLS1_3 */