@salsita-ai/sdk 0.50.0-develop.ca72986c39 → 0.50.0-develop.cba048b0d7

package/dist/docs/phoenix/layout-slots.mdx

@@ -26,36 +26,57 @@ export const Toolbar = () => (
 
 - A slot takes no props unless its row names them, and reads what it shows from the spec and the configurator's state. It renders inside the configurator only, under a `ConfiguratorLayout`.
 - A slot brings its own look but not its place: it adds no padding or scrolling around itself, so the layout puts it in a container. Two members differ: `SharedCanvas` fills its nearest positioned ancestor, and `DesktopSidebar` brings the sidebar's spacing and scrolling with it.
-- Read mode means `useAccessService().accessInfo.viewMode` is `true`: a configuration shared for viewing is open, or the host sets the `readonly` property. "No change" in the read-mode column means the slot renders the same for a viewer, so the layout decides whether a viewer sees it.
-- `Desktop*` and `Mobile*` members are twins that differ in size and arrangement; [Phone layout](#phone-layout) lists the phone ones. The container's width, not the window's, decides which one fits: `useActiveViewports()` from `@salsita-ai/sdk/react` returns the breakpoints the container satisfies. The built-in layout uses the `Desktop*` members while `desktop` is active, for a container wider than 768 pixels, and the `Mobile*` members otherwise, while `mobile` is active; `phone` means narrower than 480 pixels and `tablet` between 480 and 1024.
+- Read mode means `phx.frontend.useAccessService().accessInfo.viewMode` is `true`: a configuration shared for viewing is open, or the host sets the `readonly` property. "No change" in the read-mode column means the slot renders the same for a viewer, so the layout decides whether a viewer sees it.
+- `Desktop*` and `Mobile*` members are twins that differ in size and arrangement; [Phone layout](#phone-layout) lists the phone ones. The container's width, not the window's, decides which one fits: `phx.frontend.useActiveViewports()`, also exported from `@salsita-ai/sdk/react`, returns the breakpoints the container satisfies. The built-in layout uses the `Desktop*` members while `desktop` is active, for a container wider than 768 pixels, and the `Mobile*` members otherwise, while `mobile` is active; `phone` means narrower than 480 pixels and `tablet` between 480 and 1024.
 
 ## Canvas and services
 
-| Member                 | Shows                                                                                                                                                                                                                                                                                                                        | Fed by                                                        | With nothing configured | Read mode |
-| ---------------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ------------------------------------------------------------- | ----------------------- | --------- |
-| `SharedCanvas`         | The 3D scene, in a container that is `position: absolute; inset: 0` with the scene's background colour. The scene is hidden for a moment while the preview expands or collapses.                                                                                                                                             | The scene of the spec, through `Canvas`                       | Always renders          | No change |
-| `Canvas`               | The WebGL canvas alone, or `GPUIssuePage` when the browser has no WebGL or no GPU acceleration. It reports the scene-assets loading phase the app loader waits for.                                                                                                                                                          | The scene, the canvas settings and the `CanvasLoader` element | Always renders          | No change |
-| `Services`             | Nothing visible: it mounts `InvariantViolations` and `SideEffects`, which show the messages of `useConfiguratorMessages()` as snackbars                                                                                                                                                                                      | The configurator's state                                      | Always mounted          | No change |
-| `InvariantViolations`  | When a change is rejected, a snackbar for each violation of the rejected state, including notices and warnings already present, as `<entity id>: <message>` (a `notice` as info, a `warning` as warning, `fixable` and `fatal` as error), and "Oops, something went wrong" for an error thrown while the state was validated | The spec's invariants                                         | Nothing                 | No change |
-| `SideEffects`          | An info snackbar for each committed update that carries a hint                                                                                                                                                                                                                                                               | The hints of committed updates                                | Nothing                 | No change |
-| `DesktopSnackbarsRoot` | The element the snackbars are rendered into: a stack anchored to its bottom edge, at most 320 pixels wide                                                                                                                                                                                                                    | Every snackbar the configurator raises                        | An empty element        | No change |
+| Member                 | Shows                                                                                                                                                                                                                                                                                                                        | Fed by                                                        | With nothing configured | Read mode                                                                                                            |
+| ---------------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ------------------------------------------------------------- | ----------------------- | -------------------------------------------------------------------------------------------------------------------- |
+| `SharedCanvas`         | The 3D scene, in a container that is `position: absolute; inset: 0` with the scene's background colour. The scene is hidden for a moment while the preview expands or collapses.                                                                                                                                             | The scene of the spec, through `Canvas`                       | Always renders          | No change                                                                                                            |
+| `Canvas`               | The WebGL canvas alone, or `GPUIssuePage` when the browser has no WebGL or no GPU acceleration. It reports the scene-assets loading phase the app loader waits for.                                                                                                                                                          | The scene, the canvas settings and the `CanvasLoader` element | Always renders          | No change                                                                                                            |
+| `Services`             | Nothing visible: it mounts `InvariantViolations` and `SideEffects`, which show the messages of `useConfiguratorMessages()` as snackbars, and shows a failed save of the configuration as a persistent error snackbar with **Dismiss**, followed by "Configuration updated" when a later save succeeds                        | The configurator's state                                      | Always mounted          | No change; the save-failure and "Configuration updated" snackbars are not shown, and one left from owner mode closes |
+| `InvariantViolations`  | When a change is rejected, a snackbar for each violation of the rejected state, including notices and warnings already present, as `<entity id>: <message>` (a `notice` as info, a `warning` as warning, `fixable` and `fatal` as error), and "Oops, something went wrong" for an error thrown while the state was validated | The spec's invariants                                         | Nothing                 | No change                                                                                                            |
+| `SideEffects`          | An info snackbar for each committed update that carries a hint                                                                                                                                                                                                                                                               | The hints of committed updates                                | Nothing                 | No change                                                                                                            |
+| `DesktopSnackbarsRoot` | The element the snackbars are rendered into: a stack anchored to its bottom edge, at most 320 pixels wide                                                                                                                                                                                                                    | Every snackbar the configurator raises                        | An empty element        | No change                                                                                                            |
 
-- Mount `SharedCanvas`, not `Canvas`: `Canvas` suspends while it probes the GPU on its first mount, and `SharedCanvas` holds the boundary that catches it. Without either, the app loader stays on screen unless the project sets `appLoader: legacy`.
+- Mount `SharedCanvas`, not `Canvas`: `Canvas` suspends while it probes the GPU on its first mount, and `SharedCanvas` holds the boundary that catches it. `SharedCanvas` also tells the app loader to wait for the scene from the moment it mounts; `Canvas` alone does so only once the probe is done, so the loader can leave and come back. A layout with neither is not held by the loader for a scene.
 - `SharedCanvas` fills its nearest positioned ancestor and paints an opaque background, so the layout positions its own UI after it in the markup.
-- Snackbars are raised by `Services`, and also by the built-in finalize and footer actions when their handler fails and when saving the configuration fails. A layout that shows violations, side-effect hints and validation errors its own way calls `phx.frontend.useConfiguratorMessages(onMessage)` instead of mounting `Services`, see [Configurator Interface → Hooks for a Project Layout](?path=/docs/phoenix-configurator-interface--docs#hooks-for-a-project-layout); the other snackbars still need a root. They render into the snackbar root the layout mounts; with no root mounted they render into the page's `document.body`, outside the configurator. The desktop root is a zero-height element the snackbars stack upwards from, so the layout places it where their bottom edge belongs. The phone root leaves them fixed to the viewport, see `MobileSnackbarsRoot`. A finalize action the layout runs with `phx.frontend.useFinalizeAction` raises no snackbar; its error is the hook's `error`.
+- Snackbars are raised by `Services`, for violations, side-effect hints, validation errors and a failed save, and also by the built-in finalize and footer actions when their handler fails. A layout that shows these messages its own way calls `phx.frontend.useConfiguratorMessages(onMessage)` instead of mounting `Services`, and then shows the failed save too, see [Configurator Interface → Hooks for a Project Layout](?path=/docs/phoenix-configurator-interface--docs#hooks-for-a-project-layout); the other snackbars still need a root. They render into the snackbar root the layout mounts; with no root mounted they render into the page's `document.body`, outside the configurator. The desktop root is a zero-height element the snackbars stack upwards from, so the layout places it where their bottom edge belongs. The phone root leaves them fixed to the viewport, see `MobileSnackbarsRoot`. A finalize action the layout runs with `phx.frontend.useFinalizeActions` or `phx.frontend.useFinalizeAction` raises no snackbar; its error is the action's `error`.
+
+### Styling the snackbars
+
+Every snackbar of the configurator and the admin, raised by `Services`, a failed save, a failed preset creation or a built-in action, renders as `PhxSnackbar` from `@salsita-ai/sdk/ui`: an MUI `Alert` with the snackbar's variant as its severity, inside notistack's `SnackbarContent`. A project restyles the configurator's snackbars in its theme, from [`createGetThemeHandler`](?path=/docs/layouts-custom-theme-handler--docs), under `components.PhxSnackbar` (the admin's snackbars follow the admin's own theme, which ignores the theme handler):
+
+```ts
+// Part of the ThemeOptions a theme handler returns
+const components: ThemeOptions['components'] = {
+  PhxSnackbar: {
+    styleOverrides: {
+      alert: ({ theme }) => ({ borderRadius: 0, boxShadow: theme.shadows[3] }),
+      actionButton: { fontWeight: 600, textTransform: 'none' },
+    },
+  },
+}
+```
+
+- `styleOverrides` styles three slots: `content`, notistack's outer element; `alert`, the `Alert` with the message; and `actionButton`, a button such as **Dismiss**.
+- `defaultProps.slotProps` passes props to the slots, such as `{ alert: { variant: 'filled' } }`, and `defaultProps.slots` replaces a slot's component. The `MuiAlert` and `MuiButton` overrides of the theme reach the snackbars too.
+- A snackbar's button is described as data, not as an element: the code that raises it passes `actionButton: { label, onClick }` to notistack's `enqueueSnackbar`, and `PhxSnackbar` renders it in the `actionButton` slot, an MUI `Button` with `color="inherit"` and `size="small"`, after the snackbar's notistack `action` if it has one. `onClick` receives the snackbar's key, to close it with `closeSnackbar`. A project's own snackbars take the same option, typed by `SnackbarActionButton` from `@salsita-ai/sdk/react`, so their buttons follow the theme; an element passed as `action` renders as it is.
+- Where the snackbars appear is the snackbar root's job, see `DesktopSnackbarsRoot` and `MobileSnackbarsRoot`.
 
 ## Desktop sidebar
 
-| Member                        | Shows                                                                                                                                                                                                                                                                                            | Fed by                                                                                                                                                                                                                                                                                                     | With nothing configured                                                                                                                                                                                                                                                                                                          | Read mode                                                                                                                                                                                                  |
-| ----------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
-| `DesktopSidebar`              | The whole built-in desktop sidebar: tabs, back button, property pages and sidebar footer with their spacing, scrolling and empty states, and the assistant panel. Props: `width`, and `side` (`'start'` or `'end'`, typed `DesktopSidebarSide`; `DesktopSidebarProps` types both)                | The members below                                                                                                                                                                                                                                                                                          | As its parts                                                                                                                                                                                                                                                                                                                     | As its parts. In fullscreen it stays in place, transparent and inert                                                                                                                                       |
-| `DesktopSidebarTabs`          | Tabs that switch the navigation state                                                                                                                                                                                                                                                            | The `sidebarTabs` components of the selected entity; the `horizontalTabs` component is not shown here                                                                                                                                                                                                      | Nothing; also nothing while the summary is shown                                                                                                                                                                                                                                                                                 | No change                                                                                                                                                                                                  |
-| `useSidebarTabs()`            | A hook, `{ tabs, activeTab, onChange }`: each tab is `{ label, icon, value, isActive }`, `activeTab` is the active tab's value or `'none'`, and `onChange(value)` switches to that tab's first navigation state                                                                                  | As `DesktopSidebarTabs`                                                                                                                                                                                                                                                                                    | `tabs` is empty                                                                                                                                                                                                                                                                                                                  | No change                                                                                                                                                                                                  |
-| `DesktopSidebarBackButton`    | A "Back" button. Props: the MUI `Button` props and `icon`, also settable in the theme as `PhxDesktopSidebarBackButton`; the application config's `sidebarBackIcon` takes precedence over both                                                                                                    | The sidebar's way back: a navigation state to pop, a stacked property page, or a selected entity other than the root, unless the application config sets `showSelectionBackButton` to `false` or sets `ignoreSelectionInSidebar`                                                                           | Nothing while there is no way back                                                                                                                                                                                                                                                                                               | No change                                                                                                                                                                                                  |
-| `DesktopSidebarContent`       | The property pages of the selected entity with its entity header, a stacked page opened from them, or the summary page while the summary is shown. With the application config's `ignoreSelectionInSidebar` set, every `propertyPage` of every entity shows under the root, whatever is selected | `propertyPage`, `entityHeader`, `simpleSummary` and `customSummaryPage` components, and `ignoreSelectionInSidebar`                                                                                                                                                                                         | Nothing                                                                                                                                                                                                                                                                                                                          | **No change: the controls stay editable.** Limit them with `$filter.modes`, or render something else in read mode                                                                                          |
-| `useSidebarContent(options?)` | A hook, `{ content, goBack, hasMiniSidebar, hasSplitSidebar }`: `content` is what `DesktopSidebarContent` shows, `goBack` is the back action or `null`. `options` sets the `HeaderContainer` and `BodyContainer` components the content is wrapped in                                            | As `DesktopSidebarContent`                                                                                                                                                                                                                                                                                 | `content` is empty                                                                                                                                                                                                                                                                                                               | No change                                                                                                                                                                                                  |
-| `EntityHeader`                | An entity's title, subtitle, description and thumbnail, with its primary and secondary buttons, such as delete or replace. Props, typed `EntityHeaderProps`: `entityId` and `headerComponent`                                                                                                    | The texts and thumbnail from the entity's `detail` component (the title falls back to the entity type); the buttons from the `entityHeader` component passed in                                                                                                                                            | —                                                                                                                                                                                                                                                                                                                                | No change                                                                                                                                                                                                  |
-| `DesktopSidebarFooter`        | The price and the actions                                                                                                                                                                                                                                                                        | `basicSidebarFooter`, `universalSidebarFooter`, `readSidebarFooter`, `hiddenSidebarFooter` or `customSidebarFooter`. The basic footer offers a `finalizeButton`, else a button for a `finalizePage`, else a disabled button; the universal footer offers the `finalizeAction` and `otherAction` components | The basic footer: the price and a finalize button. With a `navigationSteps` component of two or more steps, previous and next step buttons and the finalize button only on the last step; with a summary and no steps, a **Summary** button until the summary is shown; in a preset embed, **Save Template** instead of finalize | With nothing configured, the read footer: price only. The basic footer hides its buttons. **The universal footer still shows its finalize and other actions to a viewer**; limit them with `$filter.modes` |
+| Member                        | Shows                                                                                                                                                                                                                                                                                                                                                                                                                                   | Fed by                                                                                                                                                                                                                                                                                                     | With nothing configured                                                                                                                                                                                                                                                                                                          | Read mode                                                                                                                                                                                                  |
+| ----------------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
+| `DesktopSidebar`              | The whole built-in desktop sidebar: tabs, back button, property pages and sidebar footer with their spacing, scrolling and empty states, and the assistant panel. Props: `width`, and `side` (`'start'` or `'end'`, typed `DesktopSidebarSide`; `DesktopSidebarProps` types both)                                                                                                                                                       | The members below                                                                                                                                                                                                                                                                                          | As its parts                                                                                                                                                                                                                                                                                                                     | As its parts. In fullscreen it stays in place, transparent and inert                                                                                                                                       |
+| `DesktopSidebarTabs`          | Tabs that switch the navigation state                                                                                                                                                                                                                                                                                                                                                                                                   | The `sidebarTabs` components of the selected entity; the `horizontalTabs` component is not shown here                                                                                                                                                                                                      | Nothing; also nothing while the summary is shown                                                                                                                                                                                                                                                                                 | No change                                                                                                                                                                                                  |
+| `useSidebarTabs()`            | A hook, `{ tabs, activeTab, onChange }`: each tab is `{ label, icon, value, isActive }`, `activeTab` is the active tab's value or `'none'`, and `onChange(value)` switches to that tab's first navigation state. A project layout reads its tabs with `phx.frontend.useTabNavigation()` instead, see [Configurator Interface → Hooks for a Project Layout](?path=/docs/phoenix-configurator-interface--docs#hooks-for-a-project-layout) | As `DesktopSidebarTabs`                                                                                                                                                                                                                                                                                    | `tabs` is empty                                                                                                                                                                                                                                                                                                                  | No change                                                                                                                                                                                                  |
+| `DesktopSidebarBackButton`    | A "Back" button. Props: the MUI `Button` props and `icon`, also settable in the theme as `PhxDesktopSidebarBackButton`; the application config's `sidebarBackIcon` takes precedence over both                                                                                                                                                                                                                                           | The sidebar's way back: a navigation state to pop, a stacked property page, or a selected entity other than the root, unless the application config sets `showSelectionBackButton` to `false` or sets `ignoreSelectionInSidebar`                                                                           | Nothing while there is no way back                                                                                                                                                                                                                                                                                               | No change                                                                                                                                                                                                  |
+| `DesktopSidebarContent`       | The property pages of the selected entity with its entity header, a stacked page opened from them, or the summary page while the summary is shown. With the application config's `ignoreSelectionInSidebar` set, every `propertyPage` of every entity shows under the root, whatever is selected                                                                                                                                        | `propertyPage`, `entityHeader`, `simpleSummary` and `customSummaryPage` components, and `ignoreSelectionInSidebar`                                                                                                                                                                                         | Nothing                                                                                                                                                                                                                                                                                                                          | **No change: the controls stay editable.** Limit them with `$filter.modes`, or render something else in read mode                                                                                          |
+| `useSidebarContent(options?)` | A hook, `{ content, goBack, hasMiniSidebar, hasSplitSidebar }`: `content` is what `DesktopSidebarContent` shows, `goBack` is the back action or `null`. `options` sets the `HeaderContainer` and `BodyContainer` components the content is wrapped in                                                                                                                                                                                   | As `DesktopSidebarContent`                                                                                                                                                                                                                                                                                 | `content` is empty                                                                                                                                                                                                                                                                                                               | No change                                                                                                                                                                                                  |
+| `EntityHeader`                | An entity's title, subtitle, description and thumbnail, with its primary and secondary buttons, such as delete or replace. Props, typed `EntityHeaderProps`: `entityId` and `headerComponent`                                                                                                                                                                                                                                           | The texts and thumbnail from the entity's `detail` component (the title falls back to the entity type); the buttons from the `entityHeader` component passed in                                                                                                                                            | —                                                                                                                                                                                                                                                                                                                                | No change                                                                                                                                                                                                  |
+| `DesktopSidebarFooter`        | The price and the actions                                                                                                                                                                                                                                                                                                                                                                                                               | `basicSidebarFooter`, `universalSidebarFooter`, `readSidebarFooter`, `hiddenSidebarFooter` or `customSidebarFooter`. The basic footer offers a `finalizeButton`, else a button for a `finalizePage`, else a disabled button; the universal footer offers the `finalizeAction` and `otherAction` components | The basic footer: the price and a finalize button. With a `navigationSteps` component of two or more steps, previous and next step buttons and the finalize button only on the last step; with a summary and no steps, a **Summary** button until the summary is shown; in a preset embed, **Save Template** instead of finalize | With nothing configured, the read footer: price only. The basic footer hides its buttons. **The universal footer still shows its finalize and other actions to a viewer**; limit them with `$filter.modes` |
 
 A sidebar footer with `universalSidebarFooter` does not check read mode, although the component's own description says its buttons are hidden then. A viewer of a shared configuration sees its actions. The `custom` footer renders its children unchanged as well.
 
@@ -79,7 +100,7 @@ Instead of `DesktopViewControls` or `MobileViewControls`, a layout can build its
 | `DesktopReadonlyBanner`                | "You're viewing a read-only configuration" with an **Edit configuration** button that opens `CloneToEditDialog`. Props: the MUI `Alert` props and `icon`, also settable in the theme as `PhxDesktopReadonlyBanner` | `useIsCloningAllowed()`; its icon from the application config's `readonlyBannerIcon`                                                                                                                                         | Nothing unless cloning is allowed | **It does not check read mode.** The layout renders it only in read mode, as the built-in layout does while not in fullscreen |
 | `MobileReadonlyBanner`                 | An **Edit** button that opens `CloneToEditDialog`. Props: the MUI `Button` props and `icon`, also settable in the theme as `PhxMobileReadonlyBanner`                                                               | As `DesktopReadonlyBanner`                                                                                                                                                                                                   | Nothing unless cloning is allowed | As `DesktopReadonlyBanner`                                                                                                    |
 | `CloneToEditDialog`                    | The "Edit configuration" dialog that creates an editable copy of the configuration and opens it. Props, typed `CloneToEditDialogProps`: `open` and `onClose`                                                       | The open configuration                                                                                                                                                                                                       | —                                 | —                                                                                                                             |
-| `useIsCloningAllowed()`                | A hook, `boolean`: `true` when the application config sets `shareCloneToEdit` and the session's role may create configurations                                                                                     | The application config and the session                                                                                                                                                                                       | `false`                           | Does not check read mode                                                                                                      |
+| `useIsCloningAllowed()`                | A hook, also `phx.frontend.useIsCloningAllowed()`, returning a `boolean`: `true` when the application config sets `shareCloneToEdit` and the session's role may create configurations                              | The application config and the session                                                                                                                                                                                       | `false`                           | Does not check read mode                                                                                                      |
 | `DesktopPoweredBy` / `MobilePoweredBy` | The "Powered by Salsita" mark, a link                                                                                                                                                                              | Its props `visible`, `variant` (`'black'` or `'white'`), `href`, `title`, `slots` and `slotProps`. All but `href` and `title` are also settable in the theme as `PhxDesktopBrandingPoweredBy` / `PhxMobileBrandingPoweredBy` | The mark                          | No change                                                                                                                     |
 
 ## Page footer

package/dist/docs/phoenix/localization.mdx

@@ -152,6 +152,8 @@ entities:
 
 This is the way to go when you're dealing with content that might evolve over time. The message ID stays the same, so your existing translations remain valid even when you tweak the wording. Plus, you can use dot notation to create nice, organized namespaces for your translations.
 
+A `$msg` compiles to a message descriptor. When an expression that holds one also declares a schema, the schema has to accept a message descriptor, such as `$ref: 'phx:Localizable'` or `$ref: 'phx:MessageDescriptor'`; a `$msg` declared as `type: string` or `type: number` is reported as `EXPRESSION_VALUE_TYPE_MISMATCH`.
+
 You can use both approaches throughout your domain specifications. Here are some common patterns that work well:
 
 ```yaml
@@ -547,6 +549,8 @@ When you're ready to ship:
 phx build
 ```
 
+With the application-spec pipeline, `phx dev` and `phx build` compile the Lingui macros in your frontend code with the SDK's own Lingui macro plugin and the configuration in `.phoenix/.linguirc`, so the project installs no Babel macro packages for them (see [Current and legacy project tooling](?path=/docs/phoenix-phoenix-cli--docs#current-and-legacy-project-tooling)).
+
 ### Translation Files
 
 The `.po` files in `src/locales/` are standard GNU gettext format that most translation tools support:
@@ -565,7 +569,7 @@ During development, missing translations fall back to the message ID. In product
 
 ### Locale Fallback Configuration
 
-Phoenix automatically configures comprehensive locale fallbacks in the generated `.linguirc` file. When a translation is missing for a specific regional locale, it gracefully falls back to the base language before falling back to the default language (English).
+Phoenix automatically configures comprehensive locale fallbacks in the Lingui configuration it generates. When a translation is missing for a specific regional locale, it gracefully falls back to the base language before falling back to the default language (English).
 
 **Fallback Rules:**
 
@@ -595,7 +599,7 @@ User locale: de-AT (Austrian German)
 └─ Translation in en? → Use it (default fallback)
 ```
 
-The fallback configuration is generated by `phx sync` and stored in `.linguirc`. You don't need to configure this manually - it's handled automatically based on your `availableLocales` in `spec/application.yaml`.
+The fallback configuration is generated by `phx sync` and stored in `.phoenix/.linguirc` (in the project root on the legacy pipeline; see [Current and legacy project tooling](?path=/docs/phoenix-phoenix-cli--docs#current-and-legacy-project-tooling)). You don't need to configure this manually - it's handled automatically based on your `availableLocales` in `spec/application.yaml`.
 
 ## What We Learned
 

package/dist/docs/phoenix/migration-guide.mdx

@@ -264,6 +264,8 @@ With the application-spec pipeline (`phoenix.applicationFlow` in `package.json`;
 
 A root `tsconfig.json` from the old multi-folder template, or one written by hand, stays as it is and does not pick up the generated settings or the global `phx` types in `.phoenix/globals.d.ts`, so `pnpm ts:check` fails. Delete it, or replace its content with the line above, before the first sync.
 
+With the application-spec pipeline (see [Current and legacy project tooling](?path=/docs/phoenix-phoenix-cli--docs#current-and-legacy-project-tooling)), `eslint.config.js` and `prettier.config.js` are the project's. Sync replaces a file earlier SDK versions generated, the one under the "Auto-generated file. Do not modify this file manually." header that re-exports `eslintrc` or `prettierrc`, with a file that re-exports the same configuration from `@salsita-ai/sdk/common/eslint` or `@salsita-ai/sdk/common/prettier`, and writes that file into a project that has none. A file of your own stays as it is, and editors, `phoenix check` and `phoenix fix` use it; make sure it imports only packages the project still depends on, or delete it before the first sync. Without the file, `phoenix check` and `phoenix fix` use the SDK's configuration. The legacy pipeline rewrites both files on every sync.
+
 ### 10. Create Mocks (Optional)
 
 If you have mock files, move them to `mocks/`:
@@ -290,7 +292,7 @@ This will:
 
 Other useful commands:
 
-- `pnpm phoenix sync` - Sync dependencies in package.json
+- `pnpm phoenix sync` - Regenerate the generated code and project files
 - `pnpm phoenix gen` - Regenerate project files
 - `pnpm phoenix dev` - Start development server with hot reload
 - `pnpm phoenix deployment:prepare` - Prepare for deployment
@@ -438,19 +440,19 @@ Use this checklist to verify migration completeness:
 - [ ] Configurator renders correctly
 - [ ] Admin interface works
 - [ ] All imports updated to new paths
-- [ ] Node 24 and pnpm v10 installed
+- [ ] Node 24 and a package manager installed
 
 ## Removed Files
 
 The following files are no longer needed - they are auto-generated by the CLI:
 
-| File                        | Replacement                                                                                                                         |
-| --------------------------- | ----------------------------------------------------------------------------------------------------------------------------------- |
-| `src/domain/domain.ts`      | Auto-generated in `.phoenix/domain.ts`                                                                                              |
-| `src/frontend/frontend.tsx` | Auto-generated in `.phoenix/configurator.ts`                                                                                        |
-| `tsconfig.json`             | Delete before the first sync; with the application-spec pipeline, sync writes a one-line file that extends `.phoenix/tsconfig.json` |
-| `eslint.config.js`          | Auto-generated by CLI                                                                                                               |
-| `prettier.config.js`        | Auto-generated by CLI                                                                                                               |
+| File                        | Replacement                                                                                                                                                                                                                                                    |
+| --------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
+| `src/domain/domain.ts`      | Auto-generated in `.phoenix/domain.ts`                                                                                                                                                                                                                         |
+| `src/frontend/frontend.tsx` | Auto-generated in `.phoenix/configurator.ts`                                                                                                                                                                                                                   |
+| `tsconfig.json`             | Delete before the first sync; with the application-spec pipeline, sync writes a one-line file that extends `.phoenix/tsconfig.json`                                                                                                                            |
+| `eslint.config.js`          | With the application-spec pipeline, sync replaces the file earlier SDK versions generated with one that re-exports the SDK's ESLint configuration, or writes one when there is none; a file of your own stays (see [step 9](#9-remove-auto-generated-files))   |
+| `prettier.config.js`        | With the application-spec pipeline, sync replaces the file earlier SDK versions generated with one that re-exports the SDK's Prettier configuration, or writes one when there is none; a file of your own stays (see [step 9](#9-remove-auto-generated-files)) |
 
 ## Builder Options Moved to YAML
 
@@ -484,7 +486,7 @@ Update imports to use these globals instead of importing from packages directly.
 ## Environment Requirements
 
 - Node 24
-- pnpm v10
+- A package manager; the commands in this guide use pnpm
 - `RESOURCES_URL` is an optional frontend environment variable; in local development it defaults to the Vite dev server at `http://localhost:5173`
 
 ## Next Steps

package/dist/docs/phoenix/phoenix-cli.mdx

@@ -14,7 +14,9 @@ The Phoenix CLI (`phoenix` command) is the unified tool for all configurator dev
 
 ## Starting a New Project
 
-`phoenix init [folder]` starts a configurator project in `[folder]` (default: the working directory):
+The SDK and its CLI run on Node.js 22.13 or newer, the range declared in `engines.node` of `@salsita-ai/sdk`. On an older Node.js, `phoenix` stops before it runs a command, names the running version and the required range, and exits with a non-zero code. The legacy binaries run no such check; package managers warn about the range when the SDK is installed.
+
+`phoenix init [folder]` starts a configurator project in `[folder]` (default: the working directory). The project installs with any package manager. The commands on this page use pnpm; with npm, run `npm install` and `npx phoenix sync`, with Yarn `yarn phoenix sync`, with Bun `bunx phoenix sync`:
 
 ```bash
 npx -p @salsita-ai/sdk@canary phoenix init my-configurator
@@ -28,12 +30,17 @@ pnpm phoenix dev
 `phoenix init`:
 
 1. Refuses to run when a `spec/` folder already exists, so it never touches an existing project.
-2. Writes a `package.json` that depends on the CLI's SDK version when the folder has none. An existing `package.json` is kept, as long as it depends on the SDK.
+2. Writes a `package.json` when the folder has none, and an existing one is kept, as long as it depends on the SDK. Either way, `package.json` gains the entries it lacks, and an entry it already has stays as it is:
+   - the CLI's SDK version, in a new `package.json`;
+   - every package the SDK requires as a peer, at the version [`phoenix deps`](#phoenix-deps) writes: the lowest of the SDK's range, with the `@types/*` packages in `devDependencies`. A peer the project declares in any dependency field counts, whatever its version. `@clerk/clerk-react` is not among them, because the starter spec does not set `useClerk`;
+   - `eslint` and `prettier` in `devDependencies`, at the versions the SDK runs itself, so an editor formats and lints with the same versions as `phoenix check`.
+
+   With these, the install gives the project everything `phoenix dev`, `build` and `check` need. `init` writes no `packageManager` field and no package-manager settings: a project that installs with pnpm 11 adds the settings in [Package manager](?path=/docs/phoenix-project-structure--docs#package-manager) itself.
+
 3. Adds the `dev`, `build`, `deploy`, `check` and `fix` scripts to `package.json` (see [Project Scripts](#project-scripts)). A script the project already has under one of those names keeps its command.
 4. Writes a starter spec (`spec/application.yaml`, `spec/configurator.yaml`) with one resizable, recolorable box, and switches `package.json` to the application-spec pipeline.
-5. Writes `pnpm-workspace.yaml` with the pnpm settings the first install needs: the build scripts of the SDK's dependencies are allowed or denied, and `@salsita-ai/*` packages are exempt from pnpm's minimum release age. A project inside a pnpm monorepo gets no file; the workspace root holds these settings.
 
-It asks nothing, writes no `.env` and contacts no server. `phoenix sync` then generates every other project file, including the agent skills described in [Project Structure](?path=/docs/phoenix-project-structure--docs). The `.gitignore` is among them only when the folder is inside a git repository, so run `git init` before the first sync, or sync again after it.
+The next steps it prints use the package manager you ran it with, or name none when it cannot tell. It asks nothing, writes no `.env` and contacts no server. `phoenix sync` then generates every other project file, including the agent skills described in [Project Structure](?path=/docs/phoenix-project-structure--docs). The `.gitignore` is among them only when the folder is inside a git repository, so run `git init` before the first sync, or sync again after it.
 
 ### Which project `phoenix dev` develops in
 
@@ -135,15 +142,15 @@ The same streams are available in the editor's **Logs** sidebar panel with per-s
 
 ### `phoenix check`
 
-Runs all code quality checks in sequence:
+Runs all code quality checks in sequence, with the TypeScript compiler, ESLint and Prettier the SDK installs as its own dependencies, so the versions in the project's `package.json` do not decide them:
 
-1. **TypeScript** — Type checking with `tsc`, with the project's root `tsconfig.json`, or with `.phoenix/tsconfig.json` when the project has none (see [Project Structure](?path=/docs/phoenix-project-structure--docs#root-level-files))
-2. **ESLint** — Linting rules, over `src/`; a project with no files there passes
-3. **Prettier** — Code formatting
+1. **TypeScript** — Type checking with the SDK's `tsc` (TypeScript 7), with the project's root `tsconfig.json`, or with `.phoenix/tsconfig.json` when the project has none (see [Project Structure](?path=/docs/phoenix-project-structure--docs#root-level-files))
+2. **ESLint** — Linting rules, over `src/`; a project with no files there passes. ESLint uses the project's `eslint.config.js`, or the SDK's configuration when the project has none; its type-aware rules then read the same TypeScript configuration as the type check
+3. **Prettier** — Code formatting, with the project's Prettier configuration, or the SDK's when the project has none
 
 ### `phoenix fix`
 
-Auto-fixes ESLint and Prettier issues. Equivalent to running `eslint --fix` and `prettier --write` together.
+Auto-fixes ESLint and Prettier issues, with the same tools and configurations as `phoenix check`. Equivalent to running the SDK's `eslint --fix` and `prettier --write` together.
 
 ## Environment Variables
 
@@ -157,6 +164,8 @@ A project has one generated env file. Phoenix keeps it in `.phoenix/`, as `.phoe
 - The deployment and environment commands (`deployment:prepare`, `deployment:prepare-dev`, `deployment:prepare-local`, `deployment:build-envs` and the others with an `--outFile` option) write `.env.generated` in the project root unless `--outFile` or `OUT_FILE` names another file. Deploy pipelines read it there. Once one of them has written it, `phoenix dev` and `phoenix build` use it.
 - Everything that reads environment variables follows the same rule: the root `.env.generated` when it exists, otherwise `.phoenix/.env.generated`. The two files are never merged.
 - `phoenix clean` removes `.phoenix/` and with it `.phoenix/.env.generated`; the next `phoenix dev` prepares the development deployment again. A root `.env.generated` stays.
+- `phoenix dev` starts on the deployment the file names, and prepares a new one when the file was written for another project, environment or server, when the spec registers something on the server the deployment was not prepared with (the domain model, the published data schema, the auth hook, the roles that may create configurations, or the assistant), and on `--force`. A running `phoenix dev` does not prepare again after such a change: it logs an error that asks for a restart.
+- Asset contents do not trigger preparation. After changing uploaded assets, restart with `phoenix dev --force` to prepare and upload them again.
 
 This holds for a project on the application-spec pipeline. In a project on the legacy pipeline (see [Current and legacy project tooling](#current-and-legacy-project-tooling)), `phoenix dev` always reads and writes `.env.generated` in the project root.
 
@@ -178,7 +187,7 @@ spec/application.yaml → Server prepares environment → CLI writes the generat
 | `check`  | `phoenix check`  | Run all checks (TypeScript, ESLint, Prettier) |
 | `fix`    | `phoenix fix`    | Auto-fix lint and formatting issues           |
 
-The scripts are yours: change, rename or delete them, and add your own. `phoenix sync` and `phoenix clean` leave the `scripts` section of `package.json` as it is, so they add no script, restore none you removed and remove none. Every CLI command also runs without a script, as `pnpm phoenix <command>`.
+The scripts are yours: change, rename or delete them, and add your own. `phoenix sync` and `phoenix clean` leave the `scripts` section of `package.json` as it is, so they add no script, restore none you removed and remove none. Every CLI command also runs without a script, through your package manager: `pnpm phoenix <command>`, `npx phoenix <command>`, `yarn phoenix <command>` or `bunx phoenix <command>`.
 
 A project may have other scripts than these five, such as `sync`, `test` or `verify:fix`; they are its own and stay as they are. All of this holds for a project on the application-spec pipeline, which `phoenix init` selects. In a project on the legacy pipeline (see [Current and legacy project tooling](#current-and-legacy-project-tooling)), `phoenix sync` and `phoenix clean` write their own set of scripts into `package.json` on every run, over scripts of the same name.
 
@@ -298,19 +307,24 @@ Starts the full development environment: Vite dev server, development webhook tu
 | `--environmentSlug`     | `ENVIRONMENT_SLUG` | package.json name    | Environment slug                                                                |
 | `--withLingui`          | `WITH_LINGUI`      | `false`              | Enable i18n extraction/compilation and watch i18n sources during dev            |
 | `--persistence`         | `PERSISTENCE_MODE` | `server`             | Persistence mode                                                                |
-| `--force` / `-f`        | `FORCE_REBUILD`    | `false`              | Force full rebuild, skip cache                                                  |
+| `--force` / `-f`        | `FORCE_REBUILD`    | `false`              | Force full rebuild, skip cache, and prepare the development deployment again    |
 | `--serverUrl`           | `SERVER_URL`       | the region's server  | Phoenix server URL                                                              |
 | `--region`              | `PHOENIX_REGION`   | `eu`                 | Region of the signed-in workspace, used when no server URL is set               |
 | `--skipUpload` / `--su` | `SKIP_UPLOAD`      | `false`              | Skip the S3 asset upload when the development deployment is prepared at startup |
 
 With the application-spec pipeline, `phoenix dev` creates an empty `src/` folder when the project has none, so that it rebuilds when the first source file, such as `src/webhooks/index.ts`, is added.
 
+By default, with the application-spec pipeline, `phoenix dev` bootstraps missing compiled catalogs for every configured locale at startup, so a fresh project can start without a prior sync. It compiles existing `.po` translations as they are and extracts a locale only when its `.po` source is also missing. Existing compiled catalogs and `.po` sources stay unchanged. New or changed messages still need `phoenix sync` or continuous updates enabled by `--withLingui` or `WITH_LINGUI=true`.
+
+The SDK's own Lingui CLI uses the configuration generated in `.phoenix/.linguirc`, both for `--withLingui` and when `phoenix sync` and `phoenix build` extract and compile the catalogs; see [Root Level Files](?path=/docs/phoenix-project-structure--docs#root-level-files). The dev server and `phoenix build` compile the Lingui macros (`msg`, `t`, `Trans` and the others, imported from `@lingui/core/macro`, `@lingui/react/macro` or `@lingui/macro`) with the SDK's own Lingui macro plugin and the same configuration, so the project needs neither `babel-plugin-macros` nor `@lingui/macro` for them. Babel macros of other packages are not compiled.
+
 In `server` persistence mode the project comes from `--projectSlug`, `PROJECT_SLUG` or `project` in the spec, and the credential from `DEVELOPMENT_KEY` or the `phoenix login` sign-in; see [Starting a New Project](#starting-a-new-project). When signed in, the environment is always your own development environment and `--environmentSlug` is ignored.
 
 The dev server watches for changes in:
 
 - `spec/**/*.yaml` — Domain specification files
 - `src/**/*.{ts,tsx,yaml,yml,json,html,css}` — Source files
+- `package.json` — Root dependency declarations; changes recheck the SDK's peers. A mismatch is reported without stopping dev, and correcting the manifest triggers another rebuild. Install changed dependencies with your package manager; changes to installed packages can still require restarting dev.
 - `.env` — Environment file; a change restarts the Vite dev server
 - `.env.generated`, `.phoenix/.env.generated` — Generated env files; a change rebuilds the project files. Only a file that exists when `phoenix dev` starts is watched: a root `.env.generated` that a deployment command creates while dev runs is not watched; restart `phoenix dev` to use it.
 
@@ -327,7 +341,11 @@ Restart the application after fixing either failure; a subscriber or generation
 observed the attempted update.
 
 Domain-model changes are not applied live yet. Phoenix rejects them with a restart-required
-diagnostic so the mounted application cannot observe a new model with old configuration data. Other
+diagnostic so the mounted application cannot observe a new model with old configuration data. With
+server persistence, `phoenix dev` logs an error that asks for its own restart, because the
+development deployment keeps the schema it was prepared with until `phoenix dev` starts again and
+prepares it. After the restart, open the preview address it prints: a tab whose address has `?cid=`
+loads a configuration saved with the earlier model, which the new model rejects. Other
 generated bootstrap, admin, data, environment, and host-integration surfaces should also be treated
 as restart-required unless their feature documentation explicitly states live-update support.
 
@@ -394,7 +412,7 @@ Set initial values from a local production build with roughly 5–10% headroom t
 
 ### `phoenix clean`
 
-Removes all build artifacts (`.phoenix/`, `node_modules/`), reinstalls dependencies, and rebuilds all generated files from scratch. Use this when:
+Removes `.phoenix/` and regenerates all project files from scratch. It installs nothing and leaves `node_modules/` as it is; to reinstall too, delete `node_modules/` and install with your package manager. In a project on the legacy pipeline (see [Current and legacy project tooling](#current-and-legacy-project-tooling)), `phoenix clean` also removes `node_modules/` and runs `pnpm install`. Use this when:
 
 - Generated files are corrupted or out of sync
 - After major SDK version upgrades
@@ -402,10 +420,12 @@ Removes all build artifacts (`.phoenix/`, `node_modules/`), reinstalls dependenc
 
 ### `phoenix sync`
 
-Syncs project dependencies and regenerates all project files without building Vite bundles or webhooks. Faster than `clean` — use this for routine updates after changing spec files or upgrading dependencies. Before installing, it adds the pnpm settings `phoenix init` writes to a standalone project's `pnpm-workspace.yaml` when they are missing; values you set there are kept.
+Regenerates all project files without building Vite bundles or webhooks. Faster than `clean` — use this for routine updates after changing spec files or updating the SDK. It installs nothing: install with your package manager before syncing, after any change to `package.json`. It writes no package-manager settings; `pnpm-workspace.yaml` is the project's own. In a project on the legacy pipeline, `phoenix sync` runs `pnpm install` first.
 
 With the application-spec pipeline (see [Current and legacy project tooling](#current-and-legacy-project-tooling)), `.gitignore` is written only when the project is inside a git repository: the project folder or one of its parent folders holds a `.git` entry. Outside a repository, sync neither creates the file nor changes one that is already there, and the same holds for `dev`, `build` and `clean`. Run `git init` before the first sync, or sync again after it, to get the file. The legacy pipeline writes `.gitignore` in every project.
 
+With the application-spec pipeline, sync never writes `package.json`. Before it generates any file, it checks that `package.json` declares every peer of the installed SDK at a version inside the SDK's range, and stops with a non-zero exit code when it does not. The message lists each peer that fails, with the range the SDK needs and the version found, or `missing`, and names the fix: run [`phoenix deps`](#phoenix-deps), then install with your package manager. `phoenix build`, `phoenix clean` and `phoenix dev` make the same check, and so does the platform build of [`phoenix deploy`](#phoenix-deploy). `phoenix dev` stops when the check fails at start; on a rebuild it reports the failure like a spec error and keeps running. [Dependencies](?path=/docs/phoenix-project-structure--docs#dependencies) has the rules. The legacy pipeline merges the SDK's dependencies into `package.json` on every sync.
+
 | Flag             | Env Variable    | Default | Description                    |
 | ---------------- | --------------- | ------- | ------------------------------ |
 | `--force` / `-f` | `FORCE_REBUILD` | `false` | Force full rebuild, skip cache |
@@ -419,12 +439,14 @@ pnpm phoenix deps
 pnpm install
 ```
 
+Run it after every SDK update: `phoenix sync`, `dev` and `build` stop while `package.json` does not declare the SDK's peers (see [`phoenix sync`](#phoenix-sync)).
+
 - A missing peer is added at the lowest version of the SDK's range, as an exact version, in alphabetical order: type packages (`@types/*`) to `devDependencies`, the others to `dependencies`.
 - A peer declared with a version range whose lowest version falls outside the SDK's range is set to the lowest version of the SDK's range, in the field that declares it. The output says when that is a downgrade.
 - A peer declared with a specifier that is not a version range, such as `workspace:`, `npm:`, `catalog:`, `file:`, `link:` or a git URL, stays as it is.
 - `@salsita-ai/common`, `@salsita-ai/contracts`, `@salsita-ai/platform-project-sdk`, `@salsita-ai/platform-common` and `@salsita-ai/platform-contracts` are removed, because `@salsita-ai/sdk` replaces them. No other entry is removed.
 
-Every other part of `package.json` keeps its order and formatting. `phoenix deps` installs nothing: it lists each change and names `pnpm install` as the next step, or says that nothing needed to change. Running it again changes nothing. It reads the spec to learn whether the project uses Clerk, so it stops with the spec's errors when the spec does not parse.
+Every other part of `package.json` keeps its order and formatting. `phoenix deps` installs nothing: it lists each change and names the install of the package manager you ran it with as the next step, or says that nothing needed to change. Running it again changes nothing. It reads the spec to learn whether the project uses Clerk, so it stops with the spec's errors when the spec does not parse.
 
 This holds for a project on the application-spec pipeline. In a project on the legacy pipeline (see [Current and legacy project tooling](#current-and-legacy-project-tooling)), `phoenix deps` changes nothing and says that `phoenix sync` manages the dependencies.
 
@@ -596,16 +618,17 @@ Known limits:
 - Binary assets, CSS files, locale catalog changes, dependency changes and edits requiring a full application restart are unsupported.
 - Storybook `story-dev` has no variant previews. A project on the legacy pipeline has no variant previews; the command says so and exits.
 
-Generated projects carry the `phoenix-variants` agent skill, which tells coding agents when to offer options, how to write each kind and what to do with your answer.
+Generated projects carry the `phoenix` agent skill, whose linked Variants guide tells coding agents when to offer options, how to write each kind and what to do with your answer.
 
 ## SDK Development
 
 ### `phoenix link`
 
-Link a local copy of the Phoenix SDK for development. This creates symlinks so that changes to the SDK source are reflected in your project without publishing.
+An internal tool for working on the SDK itself, and pnpm only: in a project with another package manager's lockfile and no `pnpm-lock.yaml`, it stops and changes nothing. Link a local copy of the Phoenix SDK for development in a project installed with pnpm. It writes a `file:` override for each SDK package into `pnpm-workspace.yaml`, so that after the next install changes to the SDK source are reflected in your project without publishing. It installs nothing; run the install it prints next:
 
 ```bash
 phoenix link --sdk-path ../configurator-phoenix
+pnpm install --config.optimistic-repeat-install=false
 ```
 
 | Flag         | Default                   | Description                |
@@ -616,10 +639,11 @@ When linked, `phoenix dev` automatically watches for changes in the linked SDK's
 
 ### `phoenix unlink`
 
-Remove the local SDK linking and restore normal package resolution.
+Remove the local SDK linking: it deletes the overrides `phoenix link` wrote. Like `phoenix link`, it is an internal tool and pnpm only. It installs nothing; the install it prints restores normal package resolution:
 
 ```bash
 phoenix unlink
+pnpm install --config.optimistic-repeat-install=false
 ```
 
 ## Utilities
@@ -735,7 +759,7 @@ Revokes the token on the server and removes it from the credentials file. `--reg
 
 ### `phoenix deploy`
 
-Validates the spec, adds the pnpm settings `phoenix init` writes to `pnpm-workspace.yaml` when they are missing, packs and uploads the project, starts its build on the server and follows it until the configurator is live. Before the upload the server compares the domain model with the deployed one: a model that changed under an already deployed model version is refused with the reason, and needs a new model version and a [migration](?path=/docs/phoenix-migrations--docs). Once the build starts it prints `Follow the build in Studio: <url>`, the build's page in the Studio you signed in through; a sign-in stored by an older CLI has no Studio URL, so sign in again to get the link. After `Your configurator is live at <url>` it prints one line for coding agents, which tells them to offer the run evaluation of the `phoenix-feedback` skill once you have nothing more to build; you can ignore it when you run the command yourself. `--region` or `--serverUrl` selects the server, as for `login`; `--no-wait` returns as soon as the build starts.
+Validates the spec, packs and uploads the project, starts its build on the server and follows it until the configurator is live. Before the upload the server compares the domain model with the deployed one: a model that changed under an already deployed model version is refused with the reason, and needs a new model version and a [migration](?path=/docs/phoenix-migrations--docs). Once the build starts it prints `Follow the build in Studio: <url>`, the build's page in the Studio you signed in through; a sign-in stored by an older CLI has no Studio URL, so sign in again to get the link. After `Your configurator is live at <url>` it prints one line for coding agents, which tells them to offer the run evaluation in the Feedback guide linked from the `phoenix` skill once you have nothing more to build; you can ignore it when you run the command yourself. `--region` or `--serverUrl` selects the server, as for `login`; `--no-wait` returns as soon as the build starts.
 
 To keep the conversation that led to a build, place a reviewed UTF-8 transcript in `conversation.log` at the project root before deploying. Deploy automatically includes it in the private source archive. Download the build's sources from Studio to read it; access is the same as for the rest of that build's sources. The build extractor skips the log, so it is not an application build input or a public asset. Missing logs produce a warning and deployment continues. Directories, links and special files at that path are rejected.
 
@@ -764,7 +788,7 @@ Pass the message as the argument for a short note, or `--file` for a longer repo
 
 A message holds at most 100,000 characters, from the argument or from the file. Besides the message and the flags, the CLI sends only the SDK version, the operating system and the Node.js version; no file of the project is attached, and the Phoenix team reads a build's sources through the build's page in Studio. The project must belong to the signed-in workspace, otherwise the server refuses the feedback; without a project, the feedback is sent on its own.
 
-Generated projects carry the `phoenix-feedback` agent skill. It tells coding agents when to draft feedback, to show you the draft and send it only after you approve it, and how to write a report: the build id with its Studio page link, the live configurator link, what the agent was doing, what happened and what was expected, the exact error or output, the workaround and a condensed conversation log. When you say you are done, or a deploy went live and you confirm the run is finished, the agent asks you to evaluate the run, one question at a time: minutes spent, then a score from 0 to 10 for the agent's guidance, the configurator's functionality, its UX, the quality of the 3D, the UI visuals and the overall result, then your comments. It never picks a score for you and sends nothing when you decline. Secrets, credentials and personal data never go into a message; file paths, spec and code snippets and your own words may, once you approved the draft that contains them. The command needs a server with API 1.40.0 or newer; a message over 5000 characters needs API 1.43.0 or newer.
+Generated projects carry the `phoenix` agent skill. Its linked Feedback guide tells coding agents when to draft feedback, to show you the draft and send it only after you approve it, and how to write a report: the build id with its Studio page link, the live configurator link, what the agent was doing, what happened and what was expected, the exact error or output, the workaround and a condensed conversation log. When you say you are done, or a deploy went live and you confirm the run is finished, the agent asks you to evaluate the run, one question at a time: minutes spent, then a score from 0 to 10 for the agent's guidance, the configurator's functionality, its UX, the quality of the 3D, the UI visuals and the overall result, then your comments. It never picks a score for you and sends nothing when you decline. Secrets, credentials and personal data never go into a message; file paths, spec and code snippets and your own words may, once you approved the draft that contains them. The command needs a server with API 1.40.0 or newer; a message over 5000 characters needs API 1.43.0 or newer.
 
 ## Next Steps