@rulecad/shapes 0.0.0-stage → 0.1.0

package/LICENSE

@@ -0,0 +1,21 @@
+MIT License
+
+Copyright (c) 2026 JoniBach and contributors
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.

package/README.md

@@ -1,3 +1,24 @@
-# Temporary Holding Version
+# @rulecad/shapes
 
-This version is a temporary placeholder for this package. An operational version to replace this has been submitted for review and is awaiting a staged release.
+Helpers for [JSCAD](https://github.com/jscad/OpenJSCAD.org) designs that get printed. JSCAD is a peer dependency: use
+the one you already have.
+
+```js
+import jscad from '@jscad/modeling';
+import { text, anchor, cut } from '@rulecad/shapes';
+
+const line = 0.42;                                                           // your printer's line width
+const legend = text({ text: 'Esc', height: 3.5, stroke: line * 2 });         // a 2D outline
+const [x, y] = anchor({ width: 18, depth: 18 }, [8, 4], 'tl');               // where it goes on an 18 mm face
+const inlay = jscad.transforms.translate([x, y, 0], jscad.extrusions.extrudeLinear({ height: 0.6 }, legend));
+const cap = cut(body, inlay);                                                // only the faces near the legend are cut
+```
+
+- `text({ text, height, stroke, segments })` uses JSCAD's single-line font, scaled so a capital is `height` tall.
+  Every line is thickened to `stroke` wide, so make it whole print lines. Punctuation keeps its size, and the arrows
+  the font lacks (↑ ↓ ← →) are drawn in the same stroke.
+- `anchor({ width, depth }, [w, d], at)` places something `w` × `d` on a face at one of nine anchors: `tl tc tr / ml
+  mc mr / bl bc br`. The face is centred on 0, with y to the back.
+- `cut(a, b, margin)` is `subtract(a, b)`, but only the faces near `b` are cut. JSCAD's subtract splits every face of
+  `a` along `b`'s planes, however far away, and those splits can leave hairline gaps that slicers dislike.
+- `size(geom2)` gives a 2D outline's `[width, depth]`.

package/package.json

@@ -1,6 +1,38 @@
 {
   "name": "@rulecad/shapes",
-  "version": "0.0.0-stage",
-  "stub": true,
-  "description": "Temporary package placeholder for staged publishing"
-}
+  "version": "0.1.0",
+  "description": "Shape helpers for printed JSCAD designs: text that prints cleanly, anchors on a face, and clean local cuts.",
+  "type": "module",
+  "exports": "./shapes.mjs",
+  "files": [
+    "shapes.mjs",
+    "README.md",
+    "LICENSE"
+  ],
+  "license": "MIT",
+  "keywords": [
+    "jscad",
+    "3d-printing",
+    "text",
+    "engraving",
+    "cad"
+  ],
+  "engines": {
+    "node": ">=18"
+  },
+  "sideEffects": false,
+  "repository": {
+    "type": "git",
+    "url": "git+https://github.com/JoniBach/rulecad.git",
+    "directory": "packages/shapes"
+  },
+  "scripts": {
+    "test": "node --test"
+  },
+  "dependencies": {
+    "@rulecad/variables": "^0.1.0"
+  },
+  "peerDependencies": {
+    "@jscad/modeling": "^2.12.0"
+  }
+}

package/shapes.mjs

@@ -0,0 +1,70 @@
+// Shape helpers for JSCAD designs that are printed: text that prints, and placing things on a face.
+//   text({ text, height, stroke, segments }) -> a 2D outline of the text, centred on 0: JSCAD's single-line
+//     font, scaled so a capital is height tall, each line thickened to stroke wide (whole print lines, so it prints).
+//     The arrows the font lacks (up, down, left, right) are drawn in the same stroke.
+//   anchor({ width, depth }, size, at) -> [x, y]: where something size wide and deep goes on a face width ×
+//     depth (centred on 0, y to the back) at one of 9 anchors: tl tc tr / ml mc mr / bl bc br
+import jscad from '@jscad/modeling';
+import { ANCHORS } from '@rulecad/variables';
+
+const { vectorText } = jscad.text, { path2 } = jscad.geometries, { expand } = jscad.expansions, { circle } = jscad.primitives;
+const { union, subtract } = jscad.booleans, { translate, scale } = jscad.transforms, { measureBoundingBox } = jscad.measurements;
+
+// Arrows the font doesn't have, as lines in a box height tall: a shaft and a head, pointing up, then turned
+const ARROWS = { '↑': 0, '→': -90, '↓': 180, '←': 90 };
+function arrow(char, height) {
+  const h = height / 2, head = height * 0.35, turn = (ARROWS[char] * Math.PI) / 180;
+  const r = ([x, y]) => [x * Math.cos(turn) - y * Math.sin(turn), x * Math.sin(turn) + y * Math.cos(turn)];
+  return [[[0, -h], [0, h]], [[-head, h - head], [0, h], [head, h - head]]].map((l) => l.map(r));
+}
+
+export function text({ text: input, height, stroke, segments = 8 }) {
+  if (!input) throw new Error('text: nothing to write');
+  if (input in ARROWS) return union(...arrow(input, height).map((l) => expand({ delta: stroke / 2, corners: 'round', segments }, path2.fromPoints({}, l))));
+  const lines = vectorText({ height, input }).filter((l) => l.length > 1);
+  if (!lines.length) throw new Error(`text: the font has none of "${input}"`);
+  // One scale for every legend: a capital H is height tall, so a dash or a full stop stays small. Then centre the text
+  // on its own outline, and thicken the lines (after scaling, so the stroke is exactly as wide as asked)
+  const capital = measureBoundingBox(path2.fromPoints({}, vectorText({ height, input: 'H' }).flat()));
+  const k = height / (capital[1][1] - capital[0][1] || 1);
+  const [lo, hi] = measureBoundingBox(path2.fromPoints({}, lines.flat()));
+  const cx = (lo[0] + hi[0]) / 2, cy = (lo[1] + hi[1]) / 2;
+  // Each line, scaled; points closer than half a stroke are dropped (thickening them would fold the outline over itself),
+  // and a line smaller than the stroke (a full stop's tiny loop) becomes a round dot
+  const strokes = lines.map((l) => {
+    const pts = l.map(([x, y]) => [(x - cx) * k, (y - cy) * k]), kept = [pts[0]];
+    for (const p of pts.slice(1)) if (Math.hypot(p[0] - kept.at(-1)[0], p[1] - kept.at(-1)[1]) >= stroke / 2) kept.push(p);
+    const span = Math.max(...[0, 1].map((i) => Math.max(...pts.map((p) => p[i])) - Math.min(...pts.map((p) => p[i]))));
+    if (kept.length < 2 || span < stroke) {
+      const c = [0, 1].map((i) => (Math.max(...pts.map((p) => p[i])) + Math.min(...pts.map((p) => p[i]))) / 2);
+      return circle({ center: c, radius: Math.max(stroke * 0.75, (span + stroke) / 2), segments: segments * 2 });
+    }
+    // Each straight piece thickened on its own, then joined: thickening a whole line folds over itself at sharp turns
+    // (the point of an M), which leaves holes
+    return kept.slice(1).map((p, i) => expand({ delta: stroke / 2, corners: 'round', segments }, path2.fromPoints({}, [kept[i], p])));
+  }).flat();
+  return strokes.length > 1 ? union(...strokes) : strokes[0];
+}
+
+export function anchor({ width, depth }, [w, d], at = 'mc') {
+  if (!ANCHORS.includes(at)) throw new Error(`anchor: one of ${ANCHORS.join(', ')} (got "${at}")`);
+  const col = { l: -1, c: 0, r: 1 }[at[1]], row = { t: 1, m: 0, b: -1 }[at[0]];
+  return [col * Math.max(width - w, 0) / 2, row * Math.max(depth - d, 0) / 2];
+}
+
+// cut(a, b): a with b taken out, touching only a's faces near b. JSCAD's subtract splits every face of a along the
+// planes of b's faces, however far away, and the splits can leave tiny gaps (a keycap's skirt, cut by its legend 8 mm
+// above). Here the faces clear of b's box pass through unchanged, and only the rest are cut.
+export function cut(a, b, margin = 0.05) {
+  const { geom3 } = jscad.geometries, [lo, hi] = measureBoundingBox(b);
+  const near = [], far = [];
+  for (const p of geom3.toPolygons(a)) {
+    const vs = p.vertices, clear = [0, 1, 2].some((k) => Math.max(...vs.map((v) => v[k])) < lo[k] - margin || Math.min(...vs.map((v) => v[k])) > hi[k] + margin);
+    (clear ? far : near).push(p);
+  }
+  if (!near.length) return a;
+  return geom3.create([...far, ...geom3.toPolygons(subtract(geom3.create(near), b))]);
+}
+
+export const size = (g) => { const [lo, hi] = measureBoundingBox(g); return [hi[0] - lo[0], hi[1] - lo[1]]; };
+export { scale };