@rtzh/engine 0.0.3 → 0.0.5

package/Build/Workers/createCorridorOutlineGeometry.js

@@ -0,0 +1,563 @@
+/**
+ * @license
+ * Cesium - https://github.com/CesiumGS/cesium
+ * Version 0.0.5
+ *
+ * Copyright 2011-2022 Cesium Contributors
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ * Columbus View (Pat. Pend.)
+ *
+ * Portions licensed separately.
+ * See https://github.com/CesiumGS/cesium/blob/main/LICENSE.md for full licensing details.
+ */
+
+import {
+  CorridorGeometryLibrary_default
+} from "./chunk-HLIXASKN.js";
+import {
+  CornerType_default
+} from "./chunk-ZFHCP7RN.js";
+import "./chunk-HHUKBKWS.js";
+import "./chunk-324L25HV.js";
+import {
+  GeometryOffsetAttribute_default
+} from "./chunk-ZHHEFNHL.js";
+import "./chunk-4GPHI5UY.js";
+import "./chunk-GCZNJHST.js";
+import {
+  PolygonPipeline_default
+} from "./chunk-QEGQDFX2.js";
+import {
+  arrayRemoveDuplicates_default
+} from "./chunk-23CHWHW6.js";
+import "./chunk-5MCUZL44.js";
+import "./chunk-XOXF37BU.js";
+import "./chunk-CCPKBCZD.js";
+import {
+  IndexDatatype_default
+} from "./chunk-OQK27J4J.js";
+import {
+  GeometryAttributes_default
+} from "./chunk-FTHCZAWE.js";
+import {
+  GeometryAttribute_default,
+  Geometry_default,
+  PrimitiveType_default
+} from "./chunk-5T4DXPEL.js";
+import {
+  BoundingSphere_default
+} from "./chunk-UTXXZ7XH.js";
+import "./chunk-MB2ZJQR3.js";
+import "./chunk-TEZGNCXH.js";
+import "./chunk-DKJMD2HX.js";
+import {
+  ComponentDatatype_default
+} from "./chunk-DVTKM7FF.js";
+import "./chunk-XNKQLSHI.js";
+import "./chunk-DAYNPAVN.js";
+import {
+  Ellipsoid_default
+} from "./chunk-V4I3IKAK.js";
+import {
+  Cartesian3_default,
+  Frozen_default
+} from "./chunk-ZYTMDBCR.js";
+import {
+  Math_default
+} from "./chunk-IEBTKCMB.js";
+import {
+  Check_default
+} from "./chunk-RTJ6L5O4.js";
+import {
+  defined_default
+} from "./chunk-W2EK42GB.js";
+
+// packages/engine/Source/Core/CorridorOutlineGeometry.js
+var cartesian1 = new Cartesian3_default();
+var cartesian2 = new Cartesian3_default();
+var cartesian3 = new Cartesian3_default();
+function scaleToSurface(positions, ellipsoid) {
+  for (let i = 0; i < positions.length; i++) {
+    positions[i] = ellipsoid.scaleToGeodeticSurface(positions[i], positions[i]);
+  }
+  return positions;
+}
+function combine(computedPositions, cornerType) {
+  const wallIndices = [];
+  const positions = computedPositions.positions;
+  const corners = computedPositions.corners;
+  const endPositions = computedPositions.endPositions;
+  const attributes = new GeometryAttributes_default();
+  let corner;
+  let leftCount = 0;
+  let rightCount = 0;
+  let i;
+  let indicesLength = 0;
+  let length;
+  for (i = 0; i < positions.length; i += 2) {
+    length = positions[i].length - 3;
+    leftCount += length;
+    indicesLength += length / 3 * 4;
+    rightCount += positions[i + 1].length - 3;
+  }
+  leftCount += 3;
+  rightCount += 3;
+  for (i = 0; i < corners.length; i++) {
+    corner = corners[i];
+    const leftSide = corners[i].leftPositions;
+    if (defined_default(leftSide)) {
+      length = leftSide.length;
+      leftCount += length;
+      indicesLength += length / 3 * 2;
+    } else {
+      length = corners[i].rightPositions.length;
+      rightCount += length;
+      indicesLength += length / 3 * 2;
+    }
+  }
+  const addEndPositions = defined_default(endPositions);
+  let endPositionLength;
+  if (addEndPositions) {
+    endPositionLength = endPositions[0].length - 3;
+    leftCount += endPositionLength;
+    rightCount += endPositionLength;
+    endPositionLength /= 3;
+    indicesLength += endPositionLength * 4;
+  }
+  const size = leftCount + rightCount;
+  const finalPositions = new Float64Array(size);
+  let front = 0;
+  let back = size - 1;
+  let UL, LL, UR, LR;
+  let rightPos, leftPos;
+  const halfLength = endPositionLength / 2;
+  const indices = IndexDatatype_default.createTypedArray(size / 3, indicesLength + 4);
+  let index = 0;
+  indices[index++] = front / 3;
+  indices[index++] = (back - 2) / 3;
+  if (addEndPositions) {
+    wallIndices.push(front / 3);
+    leftPos = cartesian1;
+    rightPos = cartesian2;
+    const firstEndPositions = endPositions[0];
+    for (i = 0; i < halfLength; i++) {
+      leftPos = Cartesian3_default.fromArray(
+        firstEndPositions,
+        (halfLength - 1 - i) * 3,
+        leftPos
+      );
+      rightPos = Cartesian3_default.fromArray(
+        firstEndPositions,
+        (halfLength + i) * 3,
+        rightPos
+      );
+      CorridorGeometryLibrary_default.addAttribute(finalPositions, rightPos, front);
+      CorridorGeometryLibrary_default.addAttribute(
+        finalPositions,
+        leftPos,
+        void 0,
+        back
+      );
+      LL = front / 3;
+      LR = LL + 1;
+      UL = (back - 2) / 3;
+      UR = UL - 1;
+      indices[index++] = UL;
+      indices[index++] = UR;
+      indices[index++] = LL;
+      indices[index++] = LR;
+      front += 3;
+      back -= 3;
+    }
+  }
+  let posIndex = 0;
+  let rightEdge = positions[posIndex++];
+  let leftEdge = positions[posIndex++];
+  finalPositions.set(rightEdge, front);
+  finalPositions.set(leftEdge, back - leftEdge.length + 1);
+  length = leftEdge.length - 3;
+  wallIndices.push(front / 3, (back - 2) / 3);
+  for (i = 0; i < length; i += 3) {
+    LL = front / 3;
+    LR = LL + 1;
+    UL = (back - 2) / 3;
+    UR = UL - 1;
+    indices[index++] = UL;
+    indices[index++] = UR;
+    indices[index++] = LL;
+    indices[index++] = LR;
+    front += 3;
+    back -= 3;
+  }
+  for (i = 0; i < corners.length; i++) {
+    let j;
+    corner = corners[i];
+    const l = corner.leftPositions;
+    const r = corner.rightPositions;
+    let start;
+    let outsidePoint = cartesian3;
+    if (defined_default(l)) {
+      back -= 3;
+      start = UR;
+      wallIndices.push(LR);
+      for (j = 0; j < l.length / 3; j++) {
+        outsidePoint = Cartesian3_default.fromArray(l, j * 3, outsidePoint);
+        indices[index++] = start - j - 1;
+        indices[index++] = start - j;
+        CorridorGeometryLibrary_default.addAttribute(
+          finalPositions,
+          outsidePoint,
+          void 0,
+          back
+        );
+        back -= 3;
+      }
+      wallIndices.push(start - Math.floor(l.length / 6));
+      if (cornerType === CornerType_default.BEVELED) {
+        wallIndices.push((back - 2) / 3 + 1);
+      }
+      front += 3;
+    } else {
+      front += 3;
+      start = LR;
+      wallIndices.push(UR);
+      for (j = 0; j < r.length / 3; j++) {
+        outsidePoint = Cartesian3_default.fromArray(r, j * 3, outsidePoint);
+        indices[index++] = start + j;
+        indices[index++] = start + j + 1;
+        CorridorGeometryLibrary_default.addAttribute(
+          finalPositions,
+          outsidePoint,
+          front
+        );
+        front += 3;
+      }
+      wallIndices.push(start + Math.floor(r.length / 6));
+      if (cornerType === CornerType_default.BEVELED) {
+        wallIndices.push(front / 3 - 1);
+      }
+      back -= 3;
+    }
+    rightEdge = positions[posIndex++];
+    leftEdge = positions[posIndex++];
+    rightEdge.splice(0, 3);
+    leftEdge.splice(leftEdge.length - 3, 3);
+    finalPositions.set(rightEdge, front);
+    finalPositions.set(leftEdge, back - leftEdge.length + 1);
+    length = leftEdge.length - 3;
+    for (j = 0; j < leftEdge.length; j += 3) {
+      LR = front / 3;
+      LL = LR - 1;
+      UR = (back - 2) / 3;
+      UL = UR + 1;
+      indices[index++] = UL;
+      indices[index++] = UR;
+      indices[index++] = LL;
+      indices[index++] = LR;
+      front += 3;
+      back -= 3;
+    }
+    front -= 3;
+    back += 3;
+    wallIndices.push(front / 3, (back - 2) / 3);
+  }
+  if (addEndPositions) {
+    front += 3;
+    back -= 3;
+    leftPos = cartesian1;
+    rightPos = cartesian2;
+    const lastEndPositions = endPositions[1];
+    for (i = 0; i < halfLength; i++) {
+      leftPos = Cartesian3_default.fromArray(
+        lastEndPositions,
+        (endPositionLength - i - 1) * 3,
+        leftPos
+      );
+      rightPos = Cartesian3_default.fromArray(lastEndPositions, i * 3, rightPos);
+      CorridorGeometryLibrary_default.addAttribute(
+        finalPositions,
+        leftPos,
+        void 0,
+        back
+      );
+      CorridorGeometryLibrary_default.addAttribute(finalPositions, rightPos, front);
+      LR = front / 3;
+      LL = LR - 1;
+      UR = (back - 2) / 3;
+      UL = UR + 1;
+      indices[index++] = UL;
+      indices[index++] = UR;
+      indices[index++] = LL;
+      indices[index++] = LR;
+      front += 3;
+      back -= 3;
+    }
+    wallIndices.push(front / 3);
+  } else {
+    wallIndices.push(front / 3, (back - 2) / 3);
+  }
+  indices[index++] = front / 3;
+  indices[index++] = (back - 2) / 3;
+  attributes.position = new GeometryAttribute_default({
+    componentDatatype: ComponentDatatype_default.DOUBLE,
+    componentsPerAttribute: 3,
+    values: finalPositions
+  });
+  return {
+    attributes,
+    indices,
+    wallIndices
+  };
+}
+function computePositionsExtruded(params) {
+  const ellipsoid = params.ellipsoid;
+  const computedPositions = CorridorGeometryLibrary_default.computePositions(params);
+  const attr = combine(computedPositions, params.cornerType);
+  const wallIndices = attr.wallIndices;
+  const height = params.height;
+  const extrudedHeight = params.extrudedHeight;
+  const attributes = attr.attributes;
+  const indices = attr.indices;
+  let positions = attributes.position.values;
+  let length = positions.length;
+  let extrudedPositions = new Float64Array(length);
+  extrudedPositions.set(positions);
+  const newPositions = new Float64Array(length * 2);
+  positions = PolygonPipeline_default.scaleToGeodeticHeight(
+    positions,
+    height,
+    ellipsoid
+  );
+  extrudedPositions = PolygonPipeline_default.scaleToGeodeticHeight(
+    extrudedPositions,
+    extrudedHeight,
+    ellipsoid
+  );
+  newPositions.set(positions);
+  newPositions.set(extrudedPositions, length);
+  attributes.position.values = newPositions;
+  length /= 3;
+  if (defined_default(params.offsetAttribute)) {
+    let applyOffset = new Uint8Array(length * 2);
+    if (params.offsetAttribute === GeometryOffsetAttribute_default.TOP) {
+      applyOffset = applyOffset.fill(1, 0, length);
+    } else {
+      const applyOffsetValue = params.offsetAttribute === GeometryOffsetAttribute_default.NONE ? 0 : 1;
+      applyOffset = applyOffset.fill(applyOffsetValue);
+    }
+    attributes.applyOffset = new GeometryAttribute_default({
+      componentDatatype: ComponentDatatype_default.UNSIGNED_BYTE,
+      componentsPerAttribute: 1,
+      values: applyOffset
+    });
+  }
+  let i;
+  const iLength = indices.length;
+  const newIndices = IndexDatatype_default.createTypedArray(
+    newPositions.length / 3,
+    (iLength + wallIndices.length) * 2
+  );
+  newIndices.set(indices);
+  let index = iLength;
+  for (i = 0; i < iLength; i += 2) {
+    const v0 = indices[i];
+    const v1 = indices[i + 1];
+    newIndices[index++] = v0 + length;
+    newIndices[index++] = v1 + length;
+  }
+  let UL, LL;
+  for (i = 0; i < wallIndices.length; i++) {
+    UL = wallIndices[i];
+    LL = UL + length;
+    newIndices[index++] = UL;
+    newIndices[index++] = LL;
+  }
+  return {
+    attributes,
+    indices: newIndices
+  };
+}
+function CorridorOutlineGeometry(options) {
+  options = options ?? Frozen_default.EMPTY_OBJECT;
+  const positions = options.positions;
+  const width = options.width;
+  Check_default.typeOf.object("options.positions", positions);
+  Check_default.typeOf.number("options.width", width);
+  const height = options.height ?? 0;
+  const extrudedHeight = options.extrudedHeight ?? height;
+  this._positions = positions;
+  this._ellipsoid = Ellipsoid_default.clone(options.ellipsoid ?? Ellipsoid_default.default);
+  this._width = width;
+  this._height = Math.max(height, extrudedHeight);
+  this._extrudedHeight = Math.min(height, extrudedHeight);
+  this._cornerType = options.cornerType ?? CornerType_default.ROUNDED;
+  this._granularity = options.granularity ?? Math_default.RADIANS_PER_DEGREE;
+  this._offsetAttribute = options.offsetAttribute;
+  this._workerName = "createCorridorOutlineGeometry";
+  this.packedLength = 1 + positions.length * Cartesian3_default.packedLength + Ellipsoid_default.packedLength + 6;
+}
+CorridorOutlineGeometry.pack = function(value, array, startingIndex) {
+  Check_default.typeOf.object("value", value);
+  Check_default.typeOf.object("array", array);
+  startingIndex = startingIndex ?? 0;
+  const positions = value._positions;
+  const length = positions.length;
+  array[startingIndex++] = length;
+  for (let i = 0; i < length; ++i, startingIndex += Cartesian3_default.packedLength) {
+    Cartesian3_default.pack(positions[i], array, startingIndex);
+  }
+  Ellipsoid_default.pack(value._ellipsoid, array, startingIndex);
+  startingIndex += Ellipsoid_default.packedLength;
+  array[startingIndex++] = value._width;
+  array[startingIndex++] = value._height;
+  array[startingIndex++] = value._extrudedHeight;
+  array[startingIndex++] = value._cornerType;
+  array[startingIndex++] = value._granularity;
+  array[startingIndex] = value._offsetAttribute ?? -1;
+  return array;
+};
+var scratchEllipsoid = Ellipsoid_default.clone(Ellipsoid_default.UNIT_SPHERE);
+var scratchOptions = {
+  positions: void 0,
+  ellipsoid: scratchEllipsoid,
+  width: void 0,
+  height: void 0,
+  extrudedHeight: void 0,
+  cornerType: void 0,
+  granularity: void 0,
+  offsetAttribute: void 0
+};
+CorridorOutlineGeometry.unpack = function(array, startingIndex, result) {
+  Check_default.typeOf.object("array", array);
+  startingIndex = startingIndex ?? 0;
+  const length = array[startingIndex++];
+  const positions = new Array(length);
+  for (let i = 0; i < length; ++i, startingIndex += Cartesian3_default.packedLength) {
+    positions[i] = Cartesian3_default.unpack(array, startingIndex);
+  }
+  const ellipsoid = Ellipsoid_default.unpack(array, startingIndex, scratchEllipsoid);
+  startingIndex += Ellipsoid_default.packedLength;
+  const width = array[startingIndex++];
+  const height = array[startingIndex++];
+  const extrudedHeight = array[startingIndex++];
+  const cornerType = array[startingIndex++];
+  const granularity = array[startingIndex++];
+  const offsetAttribute = array[startingIndex];
+  if (!defined_default(result)) {
+    scratchOptions.positions = positions;
+    scratchOptions.width = width;
+    scratchOptions.height = height;
+    scratchOptions.extrudedHeight = extrudedHeight;
+    scratchOptions.cornerType = cornerType;
+    scratchOptions.granularity = granularity;
+    scratchOptions.offsetAttribute = offsetAttribute === -1 ? void 0 : offsetAttribute;
+    return new CorridorOutlineGeometry(scratchOptions);
+  }
+  result._positions = positions;
+  result._ellipsoid = Ellipsoid_default.clone(ellipsoid, result._ellipsoid);
+  result._width = width;
+  result._height = height;
+  result._extrudedHeight = extrudedHeight;
+  result._cornerType = cornerType;
+  result._granularity = granularity;
+  result._offsetAttribute = offsetAttribute === -1 ? void 0 : offsetAttribute;
+  return result;
+};
+CorridorOutlineGeometry.createGeometry = function(corridorOutlineGeometry) {
+  let positions = corridorOutlineGeometry._positions;
+  const width = corridorOutlineGeometry._width;
+  const ellipsoid = corridorOutlineGeometry._ellipsoid;
+  positions = scaleToSurface(positions, ellipsoid);
+  const cleanPositions = arrayRemoveDuplicates_default(
+    positions,
+    Cartesian3_default.equalsEpsilon
+  );
+  if (cleanPositions.length < 2 || width <= 0) {
+    return;
+  }
+  const height = corridorOutlineGeometry._height;
+  const extrudedHeight = corridorOutlineGeometry._extrudedHeight;
+  const extrude = !Math_default.equalsEpsilon(
+    height,
+    extrudedHeight,
+    0,
+    Math_default.EPSILON2
+  );
+  const params = {
+    ellipsoid,
+    positions: cleanPositions,
+    width,
+    cornerType: corridorOutlineGeometry._cornerType,
+    granularity: corridorOutlineGeometry._granularity,
+    saveAttributes: false
+  };
+  let attr;
+  if (extrude) {
+    params.height = height;
+    params.extrudedHeight = extrudedHeight;
+    params.offsetAttribute = corridorOutlineGeometry._offsetAttribute;
+    attr = computePositionsExtruded(params);
+  } else {
+    const computedPositions = CorridorGeometryLibrary_default.computePositions(params);
+    attr = combine(computedPositions, params.cornerType);
+    attr.attributes.position.values = PolygonPipeline_default.scaleToGeodeticHeight(
+      attr.attributes.position.values,
+      height,
+      ellipsoid
+    );
+    if (defined_default(corridorOutlineGeometry._offsetAttribute)) {
+      const length = attr.attributes.position.values.length;
+      const offsetValue = corridorOutlineGeometry._offsetAttribute === GeometryOffsetAttribute_default.NONE ? 0 : 1;
+      const applyOffset = new Uint8Array(length / 3).fill(offsetValue);
+      attr.attributes.applyOffset = new GeometryAttribute_default({
+        componentDatatype: ComponentDatatype_default.UNSIGNED_BYTE,
+        componentsPerAttribute: 1,
+        values: applyOffset
+      });
+    }
+  }
+  const attributes = attr.attributes;
+  const boundingSphere = BoundingSphere_default.fromVertices(
+    attributes.position.values,
+    void 0,
+    3
+  );
+  return new Geometry_default({
+    attributes,
+    indices: attr.indices,
+    primitiveType: PrimitiveType_default.LINES,
+    boundingSphere,
+    offsetAttribute: corridorOutlineGeometry._offsetAttribute
+  });
+};
+var CorridorOutlineGeometry_default = CorridorOutlineGeometry;
+
+// packages/engine/Source/Workers/createCorridorOutlineGeometry.js
+function createCorridorOutlineGeometry(corridorOutlineGeometry, offset) {
+  if (defined_default(offset)) {
+    corridorOutlineGeometry = CorridorOutlineGeometry_default.unpack(
+      corridorOutlineGeometry,
+      offset
+    );
+  }
+  corridorOutlineGeometry._ellipsoid = Ellipsoid_default.clone(
+    corridorOutlineGeometry._ellipsoid
+  );
+  return CorridorOutlineGeometry_default.createGeometry(corridorOutlineGeometry);
+}
+var createCorridorOutlineGeometry_default = createCorridorOutlineGeometry;
+export {
+  createCorridorOutlineGeometry_default as default
+};

package/Build/Workers/createCylinderGeometry.js

@@ -0,0 +1,60 @@
+/**
+ * @license
+ * Cesium - https://github.com/CesiumGS/cesium
+ * Version 0.0.5
+ *
+ * Copyright 2011-2022 Cesium Contributors
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ * Columbus View (Pat. Pend.)
+ *
+ * Portions licensed separately.
+ * See https://github.com/CesiumGS/cesium/blob/main/LICENSE.md for full licensing details.
+ */
+
+import {
+  CylinderGeometry_default
+} from "./chunk-LENXRROQ.js";
+import "./chunk-BHTWF7UG.js";
+import "./chunk-ZHHEFNHL.js";
+import "./chunk-D3FNWB3Q.js";
+import "./chunk-OQK27J4J.js";
+import "./chunk-FTHCZAWE.js";
+import "./chunk-5T4DXPEL.js";
+import "./chunk-UTXXZ7XH.js";
+import "./chunk-MB2ZJQR3.js";
+import "./chunk-TEZGNCXH.js";
+import "./chunk-DKJMD2HX.js";
+import "./chunk-DVTKM7FF.js";
+import "./chunk-XNKQLSHI.js";
+import "./chunk-DAYNPAVN.js";
+import "./chunk-V4I3IKAK.js";
+import "./chunk-ZYTMDBCR.js";
+import "./chunk-IEBTKCMB.js";
+import "./chunk-RTJ6L5O4.js";
+import {
+  defined_default
+} from "./chunk-W2EK42GB.js";
+
+// packages/engine/Source/Workers/createCylinderGeometry.js
+function createCylinderGeometry(cylinderGeometry, offset) {
+  if (defined_default(offset)) {
+    cylinderGeometry = CylinderGeometry_default.unpack(cylinderGeometry, offset);
+  }
+  return CylinderGeometry_default.createGeometry(cylinderGeometry);
+}
+var createCylinderGeometry_default = createCylinderGeometry;
+export {
+  createCylinderGeometry_default as default
+};