@rse/ase 0.0.42 → 0.0.43

package/plugin/node_modules/markdownlint/doc/md022.md

@@ -1,52 +0,0 @@
-# `MD022` - Headings should be surrounded by blank lines
-
-Tags: `blank_lines`, `headings`
-
-Aliases: `blanks-around-headings`
-
-Parameters:
-
-- `lines_above`: Blank lines above heading (`integer|integer[]`, default `1`)
-- `lines_below`: Blank lines below heading (`integer|integer[]`, default `1`)
-
-Fixable: Some violations can be fixed by tooling
-
-This rule is triggered when headings (any style) are either not preceded or not
-followed by at least one blank line:
-
-```markdown
-# Heading 1
-Some text
-
-Some more text
-## Heading 2
-```
-
-To fix this, ensure that all headings have a blank line both before and after
-(except where the heading is at the beginning or end of the document):
-
-```markdown
-# Heading 1
-
-Some text
-
-Some more text
-
-## Heading 2
-```
-
-The `lines_above` and `lines_below` parameters can be used to specify a
-different number of blank lines (including `0`) above or below each heading.
-If the value `-1` is used for either parameter, any number of blank lines is
-allowed. To customize the number of lines above or below each heading level
-individually, specify a `number[]` where values correspond to heading levels
-1-6 (in order).
-
-Notes: If `lines_above` or `lines_below` are configured to require more than one
-blank line, [MD012/no-multiple-blanks](md012.md) should also be customized. This
-rule checks for *at least* as many blank lines as specified; any extra blank
-lines are ignored.
-
-Rationale: Aside from aesthetic reasons, some parsers, including `kramdown`,
-will not parse headings that don't have a blank line before, and will parse them
-as regular text.

package/plugin/node_modules/markdownlint/doc/md023.md

@@ -1,33 +0,0 @@
-# `MD023` - Headings must start at the beginning of the line
-
-Tags: `headings`, `spaces`
-
-Aliases: `heading-start-left`
-
-Fixable: Some violations can be fixed by tooling
-
-This rule is triggered when a heading is indented by one or more spaces:
-
-```markdown
-Some text
-
-  # Indented heading
-```
-
-To fix this, ensure that all headings start at the beginning of the line:
-
-```markdown
-Some text
-
-# Heading
-```
-
-Note that scenarios like block quotes "indent" the start of the line, so the
-following is also correct:
-
-```markdown
-> # Heading in Block Quote
-```
-
-Rationale: Headings that don't start at the beginning of the line will not be
-parsed as headings, and will instead appear as regular text.

package/plugin/node_modules/markdownlint/doc/md024.md

@@ -1,44 +0,0 @@
-# `MD024` - Multiple headings with the same content
-
-Tags: `headings`
-
-Aliases: `no-duplicate-heading`
-
-Parameters:
-
-- `siblings_only`: Only check sibling headings (`boolean`, default `false`)
-
-This rule is triggered if there are multiple headings in the document that have
-the same text:
-
-```markdown
-# Some text
-
-## Some text
-```
-
-To fix this, ensure that the content of each heading is different:
-
-```markdown
-# Some text
-
-## Some more text
-```
-
-If the parameter `siblings_only` is set to `true`, duplication is allowed for
-headings with different parents (as is common in changelogs):
-
-```markdown
-# Change log
-
-## 1.0.0
-
-### Features
-
-## 2.0.0
-
-### Features
-```
-
-Rationale: Some Markdown parsers generate anchors for headings based on the
-heading name; headings with the same content can cause problems with that.

package/plugin/node_modules/markdownlint/doc/md025.md

@@ -1,49 +0,0 @@
-# `MD025` - Multiple top-level headings in the same document
-
-Tags: `headings`
-
-Aliases: `single-h1`, `single-title`
-
-Parameters:
-
-- `front_matter_title`: RegExp for matching title in front matter (`string`,
-  default `^\s*title\s*[:=]`)
-- `level`: Heading level (`integer`, default `1`)
-
-This rule is triggered when a top-level heading is in use (the first line of
-the file is an h1 heading), and more than one h1 heading is in use in the
-document:
-
-```markdown
-# Top level heading
-
-# Another top-level heading
-```
-
-To fix, structure your document so there is a single h1 heading that is
-the title for the document. Subsequent headings must be
-lower-level headings (h2, h3, etc.):
-
-```markdown
-# Title
-
-## Heading
-
-## Another heading
-```
-
-Note: The `level` parameter can be used to change the top-level (ex: to h2) in
-cases where an h1 is added externally.
-
-If [YAML](https://en.wikipedia.org/wiki/YAML) front matter is present and
-contains a `title` property (commonly used with blog posts), this rule treats
-that as a top level heading and will report a violation for any subsequent
-top-level headings. To use a different property name in the front matter,
-specify the text of a regular expression via the `front_matter_title` parameter.
-To disable the use of front matter by this rule, specify `""` for
-`front_matter_title`.
-
-Rationale: A top-level heading is an h1 on the first line of the file, and
-serves as the title for the document. If this convention is in use, then there
-can not be more than one title for the document, and the entire document should
-be contained within this heading.

package/plugin/node_modules/markdownlint/doc/md026.md

@@ -1,40 +0,0 @@
-# `MD026` - Trailing punctuation in heading
-
-Tags: `headings`
-
-Aliases: `no-trailing-punctuation`
-
-Parameters:
-
-- `punctuation`: Punctuation characters (`string`, default `.,;:!。，；：！`)
-
-Fixable: Some violations can be fixed by tooling
-
-This rule is triggered on any heading that has one of the specified normal or
-full-width punctuation characters as the last character in the line:
-
-```markdown
-# This is a heading.
-```
-
-To fix this, remove the trailing punctuation:
-
-```markdown
-# This is a heading
-```
-
-Note: The `punctuation` parameter can be used to specify what characters count
-as punctuation at the end of a heading. For example, you can change it to
-`".,;:"` to allow headings that end with an exclamation point. `?` is
-allowed by default because of how common it is in headings of FAQ-style
-documents. Setting the `punctuation` parameter to `""` allows all characters -
-and is equivalent to disabling the rule.
-
-Note: The trailing semicolon of [HTML entity references][html-entity-references]
-like `©`, `©`, and `©` is ignored by this rule.
-
-Rationale: Headings are not meant to be full sentences. More information:
-[Punctuation at the end of headers][end-punctuation].
-
-[end-punctuation]: https://cirosantilli.com/markdown-style-guide#punctuation-at-the-end-of-headers
-[html-entity-references]: https://en.wikipedia.org/wiki/List_of_XML_and_HTML_character_entity_references

package/plugin/node_modules/markdownlint/doc/md027.md

@@ -1,32 +0,0 @@
-# `MD027` - Multiple spaces after blockquote symbol
-
-Tags: `blockquote`, `indentation`, `whitespace`
-
-Aliases: `no-multiple-space-blockquote`
-
-Parameters:
-
-- `list_items`: Include list items (`boolean`, default `true`)
-
-Fixable: Some violations can be fixed by tooling
-
-This rule is triggered when blockquotes have more than one space after the
-blockquote (`>`) symbol:
-
-```markdown
->  This is a blockquote with bad indentation
->  there should only be one.
-```
-
-To fix, remove any extraneous space:
-
-```markdown
-> This is a blockquote with correct
-> indentation.
-```
-
-Inferring intended list indentation within a blockquote can be challenging;
-setting the `list_items` parameter to `false` disables this rule for ordered
-and unordered list items.
-
-Rationale: Consistent formatting makes it easier to understand a document.

package/plugin/node_modules/markdownlint/doc/md028.md

@@ -1,40 +0,0 @@
-# `MD028` - Blank line inside blockquote
-
-Tags: `blockquote`, `whitespace`
-
-Aliases: `no-blanks-blockquote`
-
-This rule is triggered when two blockquote blocks are separated by nothing
-except for a blank line:
-
-```markdown
-> This is a blockquote
-> which is immediately followed by
-
-> this blockquote. Unfortunately
-> In some parsers, these are treated as the same blockquote.
-```
-
-To fix this, ensure that any blockquotes that are right next to each other
-have some text in between:
-
-```markdown
-> This is a blockquote.
-
-And Jimmy also said:
-
-> This too is a blockquote.
-```
-
-Alternatively, if they are supposed to be the same quote, then add the
-blockquote symbol at the beginning of the blank line:
-
-```markdown
-> This is a blockquote.
->
-> This is the same blockquote.
-```
-
-Rationale: Some Markdown parsers will treat two blockquotes separated by one
-or more blank lines as the same blockquote, while others will treat them as
-separate blockquotes.

package/plugin/node_modules/markdownlint/doc/md029.md

@@ -1,100 +0,0 @@
-# `MD029` - Ordered list item prefix
-
-Tags: `ol`
-
-Aliases: `ol-prefix`
-
-Parameters:
-
-- `style`: List style (`string`, default `one_or_ordered`, values `one` /
-  `one_or_ordered` / `ordered` / `zero`)
-
-Fixable: Some violations can be fixed by tooling
-
-This rule is triggered for ordered lists that do not either start with '1.' or
-do not have a prefix that increases in numerical order (depending on the
-configured style). The less-common pattern of using '0.' as a first prefix or
-for all prefixes is also supported.
-
-Example valid list if the style is configured as 'one':
-
-```markdown
-1. Do this.
-1. Do that.
-1. Done.
-```
-
-Examples of valid lists if the style is configured as 'ordered':
-
-```markdown
-1. Do this.
-2. Do that.
-3. Done.
-```
-
-```markdown
-0. Do this.
-1. Do that.
-2. Done.
-```
-
-All three examples are valid when the style is configured as 'one_or_ordered'.
-
-Example valid list if the style is configured as 'zero':
-
-```markdown
-0. Do this.
-0. Do that.
-0. Done.
-```
-
-Example invalid list for all styles:
-
-```markdown
-1. Do this.
-3. Done.
-```
-
-This rule supports 0-prefixing ordered list items for uniform indentation:
-
-```markdown
-...
-08. Item
-09. Item
-10. Item
-11. Item
-...
-```
-
-Note: This rule will report violations for cases like the following where an
-improperly-indented code block (or similar) appears between two list items and
-"breaks" the list in two:
-
-<!-- markdownlint-disable code-fence-style -->
-
-~~~markdown
-1. First list
-
-```text
-Code block
-```
-
-1. Second list
-~~~
-
-The fix is to indent the code block so it becomes part of the preceding list
-item as intended:
-
-~~~markdown
-1. First list
-
-   ```text
-   Code block
-   ```
-
-2. Still first list
-~~~
-
-<!-- markdownlint-restore -->
-
-Rationale: Consistent formatting makes it easier to understand a document.

package/plugin/node_modules/markdownlint/doc/md030.md

@@ -1,82 +0,0 @@
-# `MD030` - Spaces after list markers
-
-Tags: `ol`, `ul`, `whitespace`
-
-Aliases: `list-marker-space`
-
-Parameters:
-
-- `ol_multi`: Spaces for multi-line ordered list items (`integer`, default `1`)
-- `ol_single`: Spaces for single-line ordered list items (`integer`, default
-  `1`)
-- `ul_multi`: Spaces for multi-line unordered list items (`integer`, default
-  `1`)
-- `ul_single`: Spaces for single-line unordered list items (`integer`, default
-  `1`)
-
-Fixable: Some violations can be fixed by tooling
-
-This rule checks for the number of spaces between a list marker (e.g. '`-`',
-'`*`', '`+`' or '`1.`') and the text of the list item.
-
-The number of spaces checked for depends on the document style in use, but the
-default is 1 space after any list marker:
-
-```markdown
-* Foo
-* Bar
-* Baz
-
-1. Foo
-1. Bar
-1. Baz
-
-1. Foo
-   * Bar
-1. Baz
-```
-
-A document style may change the number of spaces after unordered list items
-and ordered list items independently, as well as based on whether the content
-of every item in the list consists of a single paragraph or multiple
-paragraphs (including sub-lists and code blocks).
-
-For example, the style guide at
-<https://cirosantilli.com/markdown-style-guide#spaces-after-list-marker>
-specifies that 1 space after the list marker should be used if every item in
-the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered
-and unordered lists respectively) if there are multiple paragraphs of content
-inside the list:
-
-```markdown
-* Foo
-* Bar
-* Baz
-```
-
-vs.
-
-```markdown
-*   Foo
-
-    Second paragraph
-
-*   Bar
-```
-
-or
-
-```markdown
-1.  Foo
-
-    Second paragraph
-
-1.  Bar
-```
-
-To fix this, ensure the correct number of spaces are used after the list marker
-for your selected document style.
-
-Rationale: Violations of this rule can lead to improperly rendered content.
-
-Note: See [Prettier.md](Prettier.md) for compatibility information.

package/plugin/node_modules/markdownlint/doc/md031.md

@@ -1,50 +0,0 @@
-# `MD031` - Fenced code blocks should be surrounded by blank lines
-
-Tags: `blank_lines`, `code`
-
-Aliases: `blanks-around-fences`
-
-Parameters:
-
-- `list_items`: Include list items (`boolean`, default `true`)
-
-Fixable: Some violations can be fixed by tooling
-
-This rule is triggered when fenced code blocks are either not preceded or not
-followed by a blank line:
-
-````markdown
-Some text
-```
-Code block
-```
-
-```
-Another code block
-```
-Some more text
-````
-
-To fix this, ensure that all fenced code blocks have a blank line both before
-and after (except where the block is at the beginning or end of the document):
-
-````markdown
-Some text
-
-```
-Code block
-```
-
-```
-Another code block
-```
-
-Some more text
-````
-
-Set the `list_items` parameter to `false` to disable this rule for list items.
-Disabling this behavior for lists can be useful if it is necessary to create a
-[tight](https://spec.commonmark.org/0.29/#tight) list containing a code fence.
-
-Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will
-not parse fenced code blocks that don't have blank lines before and after them.

package/plugin/node_modules/markdownlint/doc/md032.md

@@ -1,55 +0,0 @@
-# `MD032` - Lists should be surrounded by blank lines
-
-Tags: `blank_lines`, `bullet`, `ol`, `ul`
-
-Aliases: `blanks-around-lists`
-
-Fixable: Some violations can be fixed by tooling
-
-This rule is triggered when lists (of any kind) are either not preceded or not
-followed by a blank line:
-
-```markdown
-Some text
-* List item
-* List item
-
-1. List item
-2. List item
-***
-```
-
-In the first case above, text immediately precedes the unordered list. In the
-second case above, a thematic break immediately follows the ordered list. To fix
-violations of this rule, ensure that all lists have a blank line both before and
-after (except when the list is at the very beginning or end of the document):
-
-```markdown
-Some text
-
-* List item
-* List item
-
-1. List item
-2. List item
-
-***
-```
-
-Note that the following case is **not** a violation of this rule:
-
-```markdown
-1. List item
-   More item 1
-2. List item
-More item 2
-```
-
-Although it is not indented, the text "More item 2" is referred to as a
-[lazy continuation line][lazy-continuation] and considered part of the second
-list item.
-
-Rationale: In addition to aesthetic reasons, some parsers, including kramdown,
-will not parse lists that don't have blank lines before and after them.
-
-[lazy-continuation]: https://spec.commonmark.org/0.30/#lazy-continuation-line

package/plugin/node_modules/markdownlint/doc/md033.md

@@ -1,33 +0,0 @@
-# `MD033` - Inline HTML
-
-Tags: `html`
-
-Aliases: `no-inline-html`
-
-Parameters:
-
-- `allowed_elements`: Allowed elements (`string[]`, default `[]`)
-- `table_allowed_elements`: Allowed elements in tables (`string[]`, default
-  `[]`)
-
-This rule is triggered whenever raw HTML is used in a Markdown document:
-
-```markdown
-<h1>Inline HTML heading</h1>
-```
-
-To fix this, use 'pure' Markdown instead of including raw HTML:
-
-```markdown
-# Markdown heading
-```
-
-To allow specific HTML elements anywhere in Markdown content, set the
-`allowed_elements` parameter to a list of HTML element names. To allow a
-specific set of HTML elements within Markdown tables, set the
-`table_allowed_elements` parameter to a list of HTML element names. This can be
-used to permit the use of `<br>`-style line breaks only within Markdown tables.
-
-Rationale: Raw HTML is allowed in Markdown, but this rule is included for
-those who want their documents to only include "pure" Markdown, or for those
-who are rendering Markdown documents into something other than HTML.

package/plugin/node_modules/markdownlint/doc/md034.md

@@ -1,55 +0,0 @@
-# `MD034` - Bare URL used
-
-Tags: `links`, `url`
-
-Aliases: `no-bare-urls`
-
-Fixable: Some violations can be fixed by tooling
-
-This rule is triggered whenever a URL or email address appears without
-surrounding angle brackets:
-
-```markdown
-For more info, visit https://www.example.com/ or email user@example.com.
-```
-
-To fix this, add angle brackets around the URL or email address:
-
-```markdown
-For more info, visit <https://www.example.com/> or email <user@example.com>.
-```
-
-If a URL or email address contains non-ASCII characters, it may be not be
-handled as intended even when angle brackets are present. In such cases,
-[percent-encoding](https://en.m.wikipedia.org/wiki/Percent-encoding) can be used
-to comply with the required syntax for URL and email.
-
-Note: To include a bare URL or email without it being converted into a link,
-wrap it in a code span:
-
-```markdown
-Not a clickable link: `https://www.example.com`
-```
-
-Note: The following scenario does not trigger this rule because it could be a
-shortcut link:
-
-```markdown
-[https://www.example.com]
-```
-
-Note: The following syntax triggers this rule because the nested link could be
-a shortcut link (which takes precedence):
-
-```markdown
-[text [shortcut] text](https://example.com)
-```
-
-To avoid this, escape both inner brackets:
-
-```markdown
-[link \[text\] link](https://example.com)
-```
-
-Rationale: Without angle brackets, a bare URL or email isn't converted into a
-link by some Markdown parsers.