@rsdoctor/utils 1.5.11 → 2.0.0-alpha.0

package/compiled/filesize/index.d.ts

@@ -1,58 +1,98 @@
-interface FileSizeOptionsBase {
-    base?: 10 | 2;
-    bits?: boolean;
-    exponent?: number;
-    fullform?: boolean;
-    fullforms?: string[];
-    locale?: string | boolean;
-    localeOptions?: Intl.DateTimeFormatOptions;
-    pad?: boolean;
-    precision?: number;
-    round?: number;
-    roundingMethod?: 'round' | 'floor' | 'ceil';
-    separator?: string;
-    spacer?: string;
-    standard?: 'si' | 'iec' | 'jedec';
-    symbols?: {};
-}
-
-interface FileSizeOptionsArray extends FileSizeOptionsBase {
-    output: 'array'
-}
-
-interface FileSizeOptionsExponent extends FileSizeOptionsBase {
-    output: 'exponent'
-}
-
-interface FileSizeOptionsObject extends FileSizeOptionsBase {
-    output: 'object'
-}
-
-interface FileSizeOptionsString extends FileSizeOptionsBase {
-    output: 'string'
-}
-
-interface FileSizeReturnObject {
-    value: string,
-    symbol: string,
-    exponent: number,
-    unit: string,
-}
-
-type FileSizeReturnArray = [ number, string ]
-
-type FileSizeOptionStringOrBase = FileSizeOptionsString | FileSizeOptionsBase;
-type FileSizeOptions = FileSizeOptionsArray | FileSizeOptionsExponent | FileSizeOptionsObject | FileSizeOptionStringOrBase | undefined
-type FileSizeReturnType<Options extends FileSizeOptions> =
-    Options extends FileSizeOptionsArray
-        ? FileSizeReturnArray
-        : Options extends FileSizeOptionsExponent
-        ? number
-        : Options extends FileSizeOptionsObject
-        ? FileSizeReturnObject
-        : string;
-
-declare function filesize<Options extends FileSizeOptions = undefined>(byteCount: number | string | bigint, options?: Options): FileSizeReturnType<Options> 
-declare function partial<Options extends FileSizeOptions = undefined>(options?: Options): (byteCount: number | string | bigint) => FileSizeReturnType<Options>
+/**
+ * Options interface for configuring filesize behavior
+ */
+interface FilesizeOptions {
+  /** If true, calculates bits instead of bytes */
+  bits?: boolean;
+  /** If true, pads decimal places to match round parameter */
+  pad?: boolean;
+  /** Number base (2 for binary, 10 for decimal, -1 for auto) */
+  base?: number;
+  /** Number of decimal places to round to */
+  round?: number;
+  /** Locale for number formatting, true for system locale */
+  locale?: string | boolean;
+  /** Additional options for locale formatting */
+  localeOptions?: Intl.NumberFormatOptions;
+  /** Custom decimal separator */
+  separator?: string;
+  /** String to separate value and unit */
+  spacer?: string;
+  /** Custom unit symbols */
+  symbols?: Record<string, string>;
+  /** Unit standard to use (SI, IEC, JEDEC) */
+  standard?: "si" | "iec" | "jedec" | "";
+  /** Output format: "string", "array", "object", or "exponent" */
+  output?: "string" | "array" | "object" | "exponent";
+  /** If true, uses full unit names instead of abbreviations */
+  fullform?: boolean;
+  /** Custom full unit names */
+  fullforms?: string[];
+  /** Force specific exponent (-1 for auto) */
+  exponent?: number;
+  /** Math rounding method to use */
+  roundingMethod?: "round" | "floor" | "ceil";
+  /** Number of significant digits (0 for auto) */
+  precision?: number;
+}
+
+/**
+ * Object format return type when output is "object"
+ */
+interface FilesizeObject {
+  /** The numeric value */
+  value: number | string;
+  /** The unit symbol */
+  symbol: string;
+  /** The exponent used in calculation */
+  exponent: number;
+  /** The original unit before symbol customization */
+  unit: string;
+}
+
+/**
+ * Array format return type when output is "array"
+ */
+type FilesizeArray = [number | string, string];
+
+/**
+ * Return type based on output option
+ */
+type FilesizeReturn<T extends FilesizeOptions = {}> =
+  T['output'] extends "object" ? FilesizeObject :
+  T['output'] extends "array" ? FilesizeArray :
+  T['output'] extends "exponent" ? number :
+  string;
+
+/**
+ * Converts a file size in bytes to a human-readable string with appropriate units
+ * @param arg - The file size in bytes to convert
+ * @param options - Configuration options for formatting
+ * @returns Formatted file size based on output option
+ * @throws {TypeError} When arg is not a valid number or roundingMethod is invalid
+ * @example
+ * filesize(1024) // "1.02 kB"
+ * filesize(1024, {bits: true}) // "8.19 kbit"
+ * filesize(1024, {output: "object"}) // {value: 1.02, symbol: "kB", exponent: 1, unit: "kB"}
+ */
+declare function filesize<T extends FilesizeOptions = {}>(
+  arg: number | string | bigint,
+  options?: T
+): FilesizeReturn<T>;
+
+/**
+ * Creates a partially applied version of filesize with preset options
+ * @param options - Default options to apply to the returned function
+ * @returns A function that takes a file size and returns formatted output
+ * @example
+ * const formatBytes = partial({round: 1, standard: "iec"});
+ * formatBytes(1024) // "1 KiB"
+ * formatBytes(2048) // "2 KiB"
+ * formatBytes(1536) // "1.5 KiB"
+ */
+declare function partial<T extends FilesizeOptions = {}>(
+  options?: T
+): (arg: number | string | bigint) => FilesizeReturn<T>;
 
 export { filesize, partial };
+export type { FilesizeArray, FilesizeObject, FilesizeOptions, FilesizeReturn };

package/compiled/filesize/index.js

@@ -12,237 +12,747 @@ var exports = __webpack_exports__;
 /**
  * filesize
  *
- * @copyright 2024 Jason Mulligan <jason.mulligan@avoidwork.com>
+ * @copyright 2026 Jason Mulligan <jason.mulligan@avoidwork.com>
  * @license BSD-3-Clause
- * @version 10.1.6
+ * @version 11.0.17
  */
 
 
-const ARRAY = "array";
-const BIT = "bit";
-const BITS = "bits";
-const BYTE = "byte";
-const BYTES = "bytes";
-const EMPTY = "";
-const EXPONENT = "exponent";
-const FUNCTION = "function";
-const IEC = "iec";
-const INVALID_NUMBER = "Invalid number";
-const INVALID_ROUND = "Invalid rounding method";
-const JEDEC = "jedec";
-const OBJECT = "object";
-const PERIOD = ".";
-const ROUND = "round";
-const S = "s";
-const SI = "si";
-const SI_KBIT = "kbit";
-const SI_KBYTE = "kB";
-const SPACE = " ";
-const STRING = "string";
-const ZERO = "0";
-const STRINGS = {
-	symbol: {
-		iec: {
-			bits: ["bit", "Kibit", "Mibit", "Gibit", "Tibit", "Pibit", "Eibit", "Zibit", "Yibit"],
-			bytes: ["B", "KiB", "MiB", "GiB", "TiB", "PiB", "EiB", "ZiB", "YiB"]
-		},
-		jedec: {
-			bits: ["bit", "Kbit", "Mbit", "Gbit", "Tbit", "Pbit", "Ebit", "Zbit", "Ybit"],
-			bytes: ["B", "KB", "MB", "GB", "TB", "PB", "EB", "ZB", "YB"]
-		}
-	},
-	fullform: {
-		iec: ["", "kibi", "mebi", "gibi", "tebi", "pebi", "exbi", "zebi", "yobi"],
-		jedec: ["", "kilo", "mega", "giga", "tera", "peta", "exa", "zetta", "yotta"]
-	}
+// Error Messages
+const INVALID_NUMBER = "Invalid number";
+const INVALID_ROUND = "Invalid rounding method";
+
+// Standard Types
+const IEC = "iec";
+const JEDEC = "jedec";
+const SI = "si";
+
+// Unit Types
+const BIT = "bit";
+const BITS = "bits";
+const BYTE = "byte";
+const BYTES = "bytes";
+const SI_KBIT = "kbit";
+const SI_KBYTE = "kB";
+
+// Output Format Types
+const ARRAY = "array";
+const FUNCTION = "function";
+const OBJECT = "object";
+const STRING = "string";
+
+// Processing Constants
+const EXPONENT = "exponent";
+const ROUND = "round";
+
+// Special Characters and Values
+const E = "e";
+const EMPTY = "";
+const PERIOD = ".";
+const S = "s";
+const SPACE = " ";
+const ZERO = "0";
+
+// Data Structures
+const STRINGS = {
+	symbol: {
+		iec: {
+			bits: ["bit", "Kibit", "Mibit", "Gibit", "Tibit", "Pibit", "Eibit", "Zibit", "Yibit"],
+			bytes: ["B", "KiB", "MiB", "GiB", "TiB", "PiB", "EiB", "ZiB", "YiB"],
+		},
+		jedec: {
+			bits: ["bit", "Kbit", "Mbit", "Gbit", "Tbit", "Pbit", "Ebit", "Zbit", "Ybit"],
+			bytes: ["B", "KB", "MB", "GB", "TB", "PB", "EB", "ZB", "YB"],
+		},
+	},
+	fullform: {
+		iec: ["", "kibi", "mebi", "gibi", "tebi", "pebi", "exbi", "zebi", "yobi"],
+		jedec: ["", "kilo", "mega", "giga", "tera", "peta", "exa", "zetta", "yotta"],
+	},
 };
 
-function filesize (arg, {
-	bits = false,
-	pad = false,
-	base = -1,
-	round = 2,
-	locale = EMPTY,
-	localeOptions = {},
-	separator = EMPTY,
-	spacer = SPACE,
-	symbols = {},
-	standard = EMPTY,
-	output = STRING,
-	fullform = false,
-	fullforms = [],
-	exponent = -1,
-	roundingMethod = ROUND,
-	precision = 0
-} = {}) {
-	let e = exponent,
-		num = Number(arg),
-		result = [],
-		val = 0,
-		u = EMPTY;
-
-	// Sync base & standard
-	if (standard === SI) {
-		base = 10;
-		standard = JEDEC;
-	} else if (standard === IEC || standard === JEDEC) {
-		base = 2;
-	} else if (base === 2) {
-		standard = IEC;
-	} else {
-		base = 10;
-		standard = JEDEC;
-	}
-
-	const ceil = base === 10 ? 1000 : 1024,
-		full = fullform === true,
-		neg = num < 0,
-		roundingFunc = Math[roundingMethod];
-
-	if (typeof arg !== "bigint" && isNaN(arg)) {
-		throw new TypeError(INVALID_NUMBER);
-	}
-
-	if (typeof roundingFunc !== FUNCTION) {
-		throw new TypeError(INVALID_ROUND);
-	}
-
-	// Flipping a negative number to determine the size
-	if (neg) {
-		num = -num;
-	}
-
-	// Determining the exponent
-	if (e === -1 || isNaN(e)) {
-		e = Math.floor(Math.log(num) / Math.log(ceil));
-
-		if (e < 0) {
-			e = 0;
-		}
-	}
-
-	// Exceeding supported length, time to reduce & multiply
-	if (e > 8) {
-		if (precision > 0) {
-			precision += 8 - e;
-		}
-
-		e = 8;
-	}
-
-	if (output === EXPONENT) {
-		return e;
-	}
-
-	// Zero is now a special case because bytes divide by 1
-	if (num === 0) {
-		result[0] = 0;
-		u = result[1] = STRINGS.symbol[standard][bits ? BITS : BYTES][e];
-	} else {
-		val = num / (base === 2 ? Math.pow(2, e * 10) : Math.pow(1000, e));
-
-		if (bits) {
-			val = val * 8;
-
-			if (val >= ceil && e < 8) {
-				val = val / ceil;
-				e++;
-			}
-		}
-
-		const p = Math.pow(10, e > 0 ? round : 0);
-		result[0] = roundingFunc(val * p) / p;
-
-		if (result[0] === ceil && e < 8 && exponent === -1) {
-			result[0] = 1;
-			e++;
-		}
-
-		u = result[1] = base === 10 && e === 1 ? bits ? SI_KBIT : SI_KBYTE : STRINGS.symbol[standard][bits ? BITS : BYTES][e];
-	}
-
-	// Decorating a 'diff'
-	if (neg) {
-		result[0] = -result[0];
-	}
-
-	// Setting optional precision
-	if (precision > 0) {
-		result[0] = result[0].toPrecision(precision);
-	}
-
-	// Applying custom symbol
-	result[1] = symbols[result[1]] || result[1];
-
-	if (locale === true) {
-		result[0] = result[0].toLocaleString();
-	} else if (locale.length > 0) {
-		result[0] = result[0].toLocaleString(locale, localeOptions);
-	} else if (separator.length > 0) {
-		result[0] = result[0].toString().replace(PERIOD, separator);
-	}
-
-	if (pad && round > 0) {
-		const i =  result[0].toString(),
-			x = separator || ((i.match(/(\D)/g) || []).pop() || PERIOD),
-			tmp = i.toString().split(x),
-			s = tmp[1] || EMPTY,
-			l = s.length,
-			n = round - l;
-
-		result[0] = `${tmp[0]}${x}${s.padEnd(l + n, ZERO)}`;
-	}
-
-	if (full) {
-		result[1] = fullforms[e] ? fullforms[e] : STRINGS.fullform[standard][e] + (bits ? BIT : BYTE) + (result[0] === 1 ? EMPTY : S);
-	}
-
-	// Returning Array, Object, or String (default)
-	return output === ARRAY ? result : output === OBJECT ? {
-		value: result[0],
-		symbol: result[1],
-		exponent: e,
-		unit: u
-	} : result.join(spacer);
-}
-
-// Partial application for functional programming
-function partial ({
-	bits = false,
-	pad = false,
-	base = -1,
-	round = 2,
-	locale = EMPTY,
-	localeOptions = {},
-	separator = EMPTY,
-	spacer = SPACE,
-	symbols = {},
-	standard = EMPTY,
-	output = STRING,
-	fullform = false,
-	fullforms = [],
-	exponent = -1,
-	roundingMethod = ROUND,
-	precision = 0
-} = {}) {
-	return arg => filesize(arg, {
-		bits,
-		pad,
-		base,
-		round,
-		locale,
-		localeOptions,
-		separator,
-		spacer,
-		symbols,
-		standard,
-		output,
-		fullform,
-		fullforms,
-		exponent,
-		roundingMethod,
-		precision
-	});
+// Pre-computed lookup tables for performance optimization
+const BINARY_POWERS = [
+	1, // 2^0
+	1024, // 2^10
+	1048576, // 2^20
+	1073741824, // 2^30
+	1099511627776, // 2^40
+	1125899906842624, // 2^50
+	1152921504606846976, // 2^60
+	1180591620717411303424, // 2^70
+	1208925819614629174706176, // 2^80
+];
+
+const DECIMAL_POWERS = [
+	1, // 10^0
+	1000, // 10^3
+	1000000, // 10^6
+	1000000000, // 10^9
+	1000000000000, // 10^12
+	1000000000000000, // 10^15
+	1000000000000000000, // 10^18
+	1000000000000000000000, // 10^21
+	1000000000000000000000000, // 10^24
+];
+
+// Pre-computed log values for faster exponent calculation
+const LOG_2_1024 = Math.log(1024);
+const LOG_10_1000 = Math.log(1000);
+
+// Cached configuration lookup for better performance
+const STANDARD_CONFIGS = {
+	[SI]: { isDecimal: true, ceil: 1000, actualStandard: JEDEC },
+	[IEC]: { isDecimal: false, ceil: 1024, actualStandard: IEC },
+	[JEDEC]: { isDecimal: false, ceil: 1024, actualStandard: JEDEC },
+};
+
+/**
+ * Optimized base configuration lookup
+ * @param {string} standard - Standard type
+ * @param {number} base - Base number
+ * @returns {Object} Configuration object
+ */
+function getBaseConfiguration(standard, base) {
+	// Use cached lookup table for better performance
+	if (STANDARD_CONFIGS[standard]) {
+		return STANDARD_CONFIGS[standard];
+	}
+
+	// Base override
+	if (base === 2) {
+		return { isDecimal: false, ceil: 1024, actualStandard: IEC };
+	}
+
+	// Default
+	return { isDecimal: true, ceil: 1000, actualStandard: JEDEC };
+}
+
+/**
+ * Optimized zero value handling
+ * @param {number} precision - Precision value
+ * @param {string} actualStandard - Standard to use
+ * @param {boolean} bits - Whether to use bits
+ * @param {Object} symbols - Custom symbols
+ * @param {boolean} full - Whether to use full form
+ * @param {Array} fullforms - Custom full forms
+ * @param {string} output - Output format
+ * @param {string} spacer - Spacer character
+ * @param {string} [symbol] - Symbol to use (defaults based on bits/standard)
+ * @returns {string|Array|Object|number} Formatted result
+ */
+function handleZeroValue(
+	precision,
+	actualStandard,
+	bits,
+	symbols,
+	full,
+	fullforms,
+	output,
+	spacer,
+	symbol,
+) {
+	let value;
+	if (precision > 0) {
+		value = (0).toPrecision(precision);
+	} else {
+		value = 0;
+	}
+
+	if (output === EXPONENT) {
+		return 0;
+	}
+
+	// Set default symbol if not provided
+	if (!symbol) {
+		symbol = bits
+			? STRINGS.symbol[actualStandard].bits[0]
+			: STRINGS.symbol[actualStandard].bytes[0];
+	}
+
+	// Apply symbol customization
+	if (symbols[symbol]) {
+		symbol = symbols[symbol];
+	}
+
+	// Apply full form
+	if (full) {
+		if (fullforms[0]) {
+			symbol = fullforms[0];
+		} else {
+			symbol = STRINGS.fullform[actualStandard][0];
+			if (bits) {
+				symbol += BIT;
+			} else {
+				symbol += BYTE;
+			}
+		}
+	}
+
+	// Return in requested format
+	if (output === ARRAY) {
+		return [value, symbol];
+	}
+
+	if (output === OBJECT) {
+		return { value, symbol, exponent: 0, unit: symbol };
+	}
+
+	return value + spacer + symbol;
+}
+
+/**
+ * Optimized value calculation with bits handling
+ * @param {number} num - Input number
+ * @param {number} e - Exponent
+ * @param {boolean} isDecimal - Whether to use decimal powers
+ * @param {boolean} bits - Whether to calculate bits
+ * @param {number} ceil - Ceiling value for auto-increment
+ * @param {boolean} autoExponent - Whether exponent is auto (-1 or NaN)
+ * @returns {Object} Object with result and e properties
+ */
+function calculateOptimizedValue(num, e, isDecimal, bits, ceil, autoExponent = true) {
+	let d;
+	if (isDecimal) {
+		d = DECIMAL_POWERS[e];
+	} else {
+		d = BINARY_POWERS[e];
+	}
+	let result = num / d;
+
+	if (bits) {
+		result *= 8;
+		// Handle auto-increment for bits (only when exponent is auto)
+		if (autoExponent && result >= ceil && e < 8) {
+			result /= ceil;
+			e++;
+		}
+	}
+
+	return { result, e };
+}
+
+/**
+ * Optimized precision handling with scientific notation correction
+ * @param {number} value - Current value
+ * @param {number} precision - Precision to apply
+ * @param {number} e - Current exponent
+ * @param {number} num - Original number
+ * @param {boolean} isDecimal - Whether using decimal base
+ * @param {boolean} bits - Whether calculating bits
+ * @param {number} ceil - Ceiling value
+ * @param {Function} roundingFunc - Rounding function
+ * @param {number} round - Round value
+ * @param {number} exponent - Forced exponent (-1 for auto)
+ * @returns {Object} Object with value and e properties
+ */
+function applyPrecisionHandling(
+	value,
+	precision,
+	e,
+	num,
+	isDecimal,
+	bits,
+	ceil,
+	roundingFunc,
+	round,
+	exponent,
+) {
+	if (typeof value === "string") {
+		value = parseFloat(value);
+	}
+
+	let result = value.toPrecision(precision);
+
+	const autoExponent = exponent === -1 || isNaN(exponent);
+
+	// Handle scientific notation by recalculating with incremented exponent
+	if (result.includes(E) && e < 8 && autoExponent) {
+		e++;
+		const { result: valueResult } = calculateOptimizedValue(num, e, isDecimal, bits, ceil);
+		let p;
+		if (round > 0) {
+			p = Math.pow(10, round);
+		} else {
+			p = 1;
+		}
+		let computed;
+		if (p === 1) {
+			computed = roundingFunc(valueResult);
+		} else {
+			computed = roundingFunc(valueResult * p) / p;
+		}
+		result = computed.toPrecision(precision);
+	}
+
+	return { value: result, e };
+}
+
+/**
+ * Optimized number formatting with locale, separator, and padding
+ * @param {number|string} value - Value to format
+ * @param {string|boolean} locale - Locale setting
+ * @param {Object} localeOptions - Locale options
+ * @param {string} separator - Custom separator
+ * @param {boolean} pad - Whether to pad
+ * @param {number} round - Round value
+ * @returns {string|number} Formatted value
+ */
+function applyNumberFormatting(value, locale, localeOptions, separator, pad, round) {
+	let result = value;
+
+	// Apply locale formatting
+	if (locale === true) {
+		result = result.toLocaleString();
+	} else if (locale.length > 0) {
+		result = result.toLocaleString(locale, localeOptions);
+	} else if (separator.length > 0) {
+		result = result.toString().replace(PERIOD, separator);
+	}
+
+	// Apply padding
+	if (pad && round > 0) {
+		const resultStr = result.toString();
+		const x = separator || (resultStr.slice(1).match(/[.,]/g) || []).pop() || PERIOD;
+		const tmp = resultStr.split(x);
+		const s = tmp[1] || EMPTY;
+
+		const l = s.length;
+		const n = round - l;
+
+		result = `${tmp[0]}${x}${s.padEnd(l + n, ZERO)}`;
+	}
+
+	return result;
+}
+
+/**
+ * Calculates exponent from the input value using pre-computed log values and clamps to supported range
+ * Also adjusts precision when exponent exceeds the lookup table bounds
+ * @param {number} num - Input file size in bytes
+ * @param {number} e - Current exponent value
+ * @param {number} exponent - Original user-provided exponent option (-1 for auto)
+ * @param {boolean} isDecimal - Whether to use decimal (SI) base
+ * @param {number} precision - Current precision value (modified when e > 8)
+ * @returns {Object} Object with computed e value and possibly adjusted precision
+ */
+function calculateExponent(num, e, exponent, isDecimal, precision) {
+	if (e === -1 || isNaN(e)) {
+		if (isDecimal) {
+			e = Math.floor(Math.log(num) / LOG_10_1000);
+		} else {
+			e = Math.floor(Math.log(num) / LOG_2_1024);
+		}
+		if (e < 0) {
+			e = 0;
+		}
+	}
+
+	if (e > 8) {
+		if (precision > 0) {
+			precision += 8 - e;
+		}
+		return { e: 8, precision };
+	}
+
+	return { e, precision };
+}
+
+/**
+ * Applies rounding to the raw calculated value and handles auto-increment ceiling
+ * @param {number} val - Raw value before rounding
+ * @param {number} ceil - Ceiling threshold (1000 for SI, 1024 for IEC)
+ * @param {number} e - Current exponent value
+ * @param {number} round - Number of decimal places
+ * @param {Function} roundingFunc - Rounding method (Math.round, Math.floor, Math.ceil)
+ * @param {boolean} autoExponent - Whether exponent is auto-calculated (-1 or NaN)
+ * @returns {Object} Object with rounded value and possibly incremented exponent
+ */
+function applyRounding(val, ceil, e, round, roundingFunc, autoExponent) {
+	let p;
+	if (e > 0 && round > 0) {
+		p = Math.pow(10, round);
+	} else {
+		p = 1;
+	}
+	let r;
+	if (p === 1) {
+		r = roundingFunc(val);
+	} else {
+		r = roundingFunc(val * p) / p;
+	}
+
+	if (r === ceil && e < 8 && autoExponent) {
+		r = 1;
+		e++;
+	}
+
+	return { value: r, e };
+}
+
+/**
+ * Resolves the unit symbol for the given standard, bits mode, and exponent
+ * Handles SI standard special case where exponent 1 always uses "kB" or "kbit"
+ * @param {string} actualStandard - The resolved standard (iec, jedec)
+ * @param {boolean} bits - Whether formatting bit values
+ * @param {number} e - Current exponent index
+ * @param {boolean} isDecimal - Whether using decimal (SI) base
+ * @returns {string} The resolved unit symbol string
+ */
+function resolveSymbol(actualStandard, bits, e, isDecimal) {
+	const symbolTable = STRINGS.symbol[actualStandard][bits ? BITS : BYTES];
+	let result;
+	if (isDecimal && e === 1) {
+		if (bits) {
+			result = SI_KBIT;
+		} else {
+			result = SI_KBYTE;
+		}
+	} else {
+		result = symbolTable[e];
+	}
+	return result;
+}
+
+/**
+ * Decorates the result: applies negation, custom symbols, number formatting, and full form names
+ * Mutates the result array in-place for both value (index 0) and symbol (index 1)
+ * @param {Array} result - Result array with numeric value at [0] and string symbol at [1]
+ * @param {boolean} neg - Whether the original input was negative
+ * @param {Object} symbols - Custom symbol override map
+ * @param {string|boolean} locale - Locale string for formatting
+ * @param {Object} localeOptions - Additional locale formatting options
+ * @param {string} separator - Custom decimal separator
+ * @param {boolean} pad - Whether zero-pad decimals
+ * @param {number} round - Target decimal count for padding
+ * @param {boolean} full - Whether to use full unit names
+ * @param {Array} fullforms - Custom full unit name overrides
+ * @param {string} actualStandard - Unit standard for full form lookup
+ * @param {number} e - Current exponent index
+ * @param {boolean} bits - Whether formatting bit values
+ * @returns {void} Mutates result array in place
+ */
+function decorateResult(
+	result,
+	neg,
+	symbols,
+	locale,
+	localeOptions,
+	separator,
+	pad,
+	round,
+	full,
+	fullforms,
+	actualStandard,
+	e,
+	bits,
+) {
+	if (neg) {
+		result[0] = -result[0];
+	}
+
+	if (symbols[result[1]]) {
+		result[1] = symbols[result[1]];
+	}
+
+	result[0] = applyNumberFormatting(result[0], locale, localeOptions, separator, pad, round);
+
+	if (full) {
+		let unit;
+		if (bits) {
+			unit = BIT;
+		} else {
+			unit = BYTE;
+		}
+		let val;
+		if (typeof result[0] === "string") {
+			val = parseFloat(result[0]);
+		} else {
+			val = result[0];
+		}
+		// Determine singular/plural suffix
+		let suffix;
+		if (val === 1) {
+			suffix = EMPTY;
+		} else {
+			suffix = S;
+		}
+		// Determine symbol — custom fullforms are the complete name, defaults get unit+suffix
+		if (fullforms[e]) {
+			result[1] = fullforms[e];
+		} else {
+			result[1] = STRINGS.fullform[actualStandard][e] + unit + suffix;
+		}
+	}
+}
+
+/**
+ * Formats the computed result array into the requested output type
+ * @param {Array} result - Result array with formatted value at [0] and symbol at [1]
+ * @param {number} e - Current exponent
+ * @param {string} u - Original resolved symbol (before custom override)
+ * @param {string} output - Output type (ARRAY, OBJECT, STRING)
+ * @param {string} spacer - String separator between value and unit
+ * @returns {string|Array|Object|number} Formatted result in requested type
+ */
+function formatOutput(result, e, u, output, spacer) {
+	if (output === ARRAY) {
+		return result;
+	}
+
+	if (output === OBJECT) {
+		return {
+			value: result[0],
+			symbol: result[1],
+			exponent: e,
+			unit: u,
+		};
+	}
+
+	let formatted;
+	if (spacer === SPACE) {
+		formatted = `${result[0]} ${result[1]}`;
+	} else {
+		formatted = result.join(spacer);
+	}
+	return formatted;
+}
+
+/**
+ * Converts a file size in bytes to a human-readable string with appropriate units
+ * @param {number|string|bigint} arg - The file size in bytes to convert
+ * @param {Object} [options={}] - Configuration options for formatting
+ * @param {boolean} [options.bits=false] - If true, calculates bits instead of bytes
+ * @param {boolean} [options.pad=false] - If true, pads decimal places to match round parameter
+ * @param {number} [options.base=-1] - Number base (2 for binary, 10 for decimal, -1 for auto)
+ * @param {number} [options.round=2] - Number of decimal places to round to
+ * @param {string|boolean} [options.locale=""] - Locale for number formatting, true for system locale
+ * @param {Object} [options.localeOptions={}] - Additional options for locale formatting
+ * @param {string} [options.separator=""] - Custom decimal separator
+ * @param {string} [options.spacer=" "] - String to separate value and unit
+ * @param {Object} [options.symbols={}] - Custom unit symbols
+ * @param {string} [options.standard=""] - Unit standard to use (SI, IEC, JEDEC)
+ * @param {string} [options.output="string"] - Output format: "string", "array", "object", or "exponent"
+ * @param {boolean} [options.fullform=false] - If true, uses full unit names instead of abbreviations
+ * @param {Array} [options.fullforms=[]] - Custom full unit names
+ * @param {number} [options.exponent=-1] - Force specific exponent (-1 for auto)
+ * @param {string} [options.roundingMethod="round"] - Math rounding method to use
+ * @param {number} [options.precision=0] - Number of significant digits (0 for auto)
+ * @returns {string|Array|Object|number} Formatted file size based on output option
+ * @throws {TypeError} When arg is not a valid number or roundingMethod is invalid
+ * @example
+ * filesize(1024) // "1.02 kB"
+ * filesize(1024, {bits: true}) // "8.19 kbit"
+ * filesize(1024, {output: "object"}) // {value: 1.02, symbol: "kB", exponent: 1, unit: "kB"}
+ */
+function filesize(
+	arg,
+	{
+		bits = false,
+		pad = false,
+		base = -1,
+		round = 2,
+		locale = EMPTY,
+		localeOptions = {},
+		separator = EMPTY,
+		spacer = SPACE,
+		symbols = {},
+		standard = EMPTY,
+		output = STRING,
+		fullform = false,
+		fullforms = [],
+		exponent = -1,
+		roundingMethod = ROUND,
+		precision = 0,
+	} = {},
+) {
+	let e = exponent,
+		num,
+		result = [],
+		val = 0,
+		u = EMPTY;
+
+	if (typeof arg === "bigint") {
+		num = Number(arg);
+	} else {
+		num = Number(arg);
+
+		if (isNaN(arg)) {
+			throw new TypeError(INVALID_NUMBER);
+		}
+
+		if (!isFinite(num)) {
+			throw new TypeError(INVALID_NUMBER);
+		}
+	}
+
+	const { isDecimal, ceil, actualStandard } = getBaseConfiguration(standard, base);
+
+	const full = fullform === true,
+		neg = num < 0,
+		roundingFunc = Math[roundingMethod];
+
+	if (typeof roundingFunc !== FUNCTION) {
+		throw new TypeError(INVALID_ROUND);
+	}
+
+	if (neg) {
+		num = -num;
+	}
+
+	if (num === 0) {
+		return handleZeroValue(
+			precision,
+			actualStandard,
+			bits,
+			symbols,
+			full,
+			fullforms,
+			output,
+			spacer,
+		);
+	}
+
+	// Exponent calculation + clamp + precision adjustment
+	const { e: calculatedE, precision: precisionAdjusted } = calculateExponent(
+		num,
+		e,
+		exponent,
+		isDecimal,
+		precision,
+	);
+	e = calculatedE;
+	const autoExponent = exponent === -1 || isNaN(exponent);
+
+	if (output === EXPONENT) {
+		return e;
+	}
+
+	const { result: valueResult, e: valueExponent } = calculateOptimizedValue(
+		num,
+		e,
+		isDecimal,
+		bits,
+		ceil,
+		autoExponent,
+	);
+	val = valueResult;
+	e = valueExponent;
+
+	// Rounding + auto-increment ceiling
+	const rounded = applyRounding(val, ceil, e, round, roundingFunc, autoExponent);
+	result[0] = rounded.value;
+	e = rounded.e;
+
+	// Precision handling
+	if (precisionAdjusted > 0) {
+		const precisionResult = applyPrecisionHandling(
+			result[0],
+			precisionAdjusted,
+			e,
+			num,
+			isDecimal,
+			bits,
+			ceil,
+			roundingFunc,
+			round,
+			exponent,
+		);
+		result[0] = precisionResult.value;
+		e = precisionResult.e;
+	}
+
+	u = resolveSymbol(actualStandard, bits, e, isDecimal);
+	result[1] = u;
+
+	decorateResult(
+		result,
+		neg,
+		symbols,
+		locale,
+		localeOptions,
+		separator,
+		pad,
+		round,
+		full,
+		fullforms,
+		actualStandard,
+		e,
+		bits,
+	);
+
+	return formatOutput(result, e, u, output, spacer);
+}
+
+/**
+ * Creates a partially applied version of filesize with preset options
+ * @param {Object} [options={}] - Configuration options (same as filesize)
+ * @param {boolean} [options.bits=false] - If true, calculates bits instead of bytes
+ * @param {boolean} [options.pad=false] - If true, pads decimal places to match round parameter
+ * @param {number} [options.base=-1] - Number base (2 for binary, 10 for decimal, -1 for auto)
+ * @param {number} [options.round=2] - Number of decimal places to round to
+ * @param {string|boolean} [options.locale=""] - Locale for number formatting, true for system locale
+ * @param {Object} [options.localeOptions={}] - Additional options for locale formatting
+ * @param {string} [options.separator=""] - Custom decimal separator
+ * @param {string} [options.spacer=" "] - String to separate value and unit
+ * @param {Object} [options.symbols={}] - Custom unit symbols
+ * @param {string} [options.standard=""] - Unit standard to use (SI, IEC, JEDEC)
+ * @param {string} [options.output="string"] - Output format: "string", "array", "object", or "exponent"
+ * @param {boolean} [options.fullform=false] - If true, uses full unit names instead of abbreviations
+ * @param {Array} [options.fullforms=[]] - Custom full unit names
+ * @param {number} [options.exponent=-1] - Force specific exponent (-1 for auto)
+ * @param {string} [options.roundingMethod="round"] - Math rounding method to use
+ * @param {number} [options.precision=0] - Number of significant digits (0 for auto)
+ * @returns {Function} A function that takes a file size and returns formatted output
+ * @example
+ * const formatBytes = partial({round: 1, standard: "iec"});
+ * formatBytes(1024) // "1 KiB"
+ * formatBytes(2048) // "2 KiB"
+ * formatBytes(1536) // "1.5 KiB"
+ */
+function partial({
+	bits = false,
+	pad = false,
+	base = -1,
+	round = 2,
+	locale = EMPTY,
+	separator = EMPTY,
+	spacer = SPACE,
+	standard = EMPTY,
+	output = STRING,
+	fullform = false,
+	exponent = -1,
+	roundingMethod = ROUND,
+	precision = 0,
+	localeOptions = {},
+	symbols = {},
+	fullforms = [],
+} = {}) {
+	const cloned = {
+		localeOptions: JSON.parse(JSON.stringify(localeOptions)),
+		symbols: JSON.parse(JSON.stringify(symbols)),
+		fullforms: JSON.parse(JSON.stringify(fullforms)),
+	};
+
+	return (arg) =>
+		filesize(arg, {
+			bits,
+			pad,
+			base,
+			round,
+			locale,
+			localeOptions: cloned.localeOptions,
+			separator,
+			spacer,
+			symbols: cloned.symbols,
+			standard,
+			output,
+			fullform,
+			fullforms: cloned.fullforms,
+			exponent,
+			roundingMethod,
+			precision,
+		});
 }
 
 exports.filesize = filesize;

package/compiled/filesize/license

@@ -1,28 +1,28 @@
-Copyright (c) 2024, Jason Mulligan
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright notice, this
-  list of conditions and the following disclaimer.
-
-* Redistributions in binary form must reproduce the above copyright notice,
-  this list of conditions and the following disclaimer in the documentation
-  and/or other materials provided with the distribution.
-
-* Neither the name of filesize nor the names of its
-  contributors may be used to endorse or promote products derived from
-  this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
+Copyright (c) 2026, Jason Mulligan
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+  list of conditions and the following disclaimer.
+
+* Redistributions in binary form must reproduce the above copyright notice,
+  this list of conditions and the following disclaimer in the documentation
+  and/or other materials provided with the distribution.
+
+* Neither the name of filesize nor the names of its
+  contributors may be used to endorse or promote products derived from
+  this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+

package/compiled/filesize/package.json

@@ -1 +1 @@
-{"name":"filesize","author":"Jason Mulligan <jason.mulligan@avoidwork.com>","version":"10.1.6","license":"BSD-3-Clause","types":"index.d.ts","type":"commonjs"}
+{"name":"filesize","author":"Jason Mulligan <jason.mulligan@avoidwork.com>","version":"11.0.17","license":"BSD-3-Clause","types":"index.d.ts","type":"commonjs"}

package/dist/common/rspack.d.cts

@@ -11,7 +11,7 @@ export declare enum RspackSummaryCostsDataName {
  * @param configs - Array of compiler configurations
  * @returns Object containing compiler type and source map support status
  */
-export declare function checkSourceMapSupport(configs: SDK.WebpackConfigData[]): {
+export declare function checkSourceMapSupport(configs: SDK.BundlerConfigData[]): {
     isRspack: boolean;
     hasSourceMap: boolean;
 };

package/dist/common/rspack.d.ts

@@ -11,7 +11,7 @@ export declare enum RspackSummaryCostsDataName {
  * @param configs - Array of compiler configurations
  * @returns Object containing compiler type and source map support status
  */
-export declare function checkSourceMapSupport(configs: SDK.WebpackConfigData[]): {
+export declare function checkSourceMapSupport(configs: SDK.BundlerConfigData[]): {
     isRspack: boolean;
     hasSourceMap: boolean;
 };

package/dist/common.cjs

@@ -1348,7 +1348,7 @@ for(var __rspack_i in (()=>{
                                 acc[chunk.id] || (acc[chunk.id] = []), acc[chunk.id].push(asset);
                             }), acc), {}), searchedChunksMap = new Map();
                         return moduleGraph?.modules.filter((module)=>{
-                            module.webpackId.includes(moduleName) && module.chunks.forEach((chunk)=>{
+                            module.identifier.includes(moduleName) && module.chunks.forEach((chunk)=>{
                                 searchedChunksMap.has(chunk) || (assetMap[chunk] || []).forEach((asset)=>{
                                     asset.endsWith('.js') && searchedChunksMap.set(chunk, asset);
                                 });
@@ -1361,7 +1361,7 @@ for(var __rspack_i in (()=>{
                         this.loader.loadData('root')
                     ]).then((res)=>{
                         let [moduleGraph, root] = res, { moduleName, chunk } = body;
-                        return moduleName ? moduleGraph?.modules.filter((module)=>module.webpackId.includes(moduleName) && module.chunks.includes(chunk)).map((filteredModule)=>({
+                        return moduleName ? moduleGraph?.modules.filter((module)=>module.identifier.includes(moduleName) && module.chunks.includes(chunk)).map((filteredModule)=>({
                                 id: filteredModule.id,
                                 path: filteredModule.path,
                                 relativePath: (0, external_path_.relative)(root, filteredModule.path)
@@ -1417,7 +1417,7 @@ for(var __rspack_i in (()=>{
                 case types_.SDK.ServerAPI.API.GetAllModuleGraphFilter:
                     return this.loader.loadData('moduleGraph').then((moduleGraph)=>moduleGraph?.modules.map((m)=>({
                                 id: m.id,
-                                webpackId: m.webpackId,
+                                identifier: m.identifier,
                                 path: m.path,
                                 size: m.size,
                                 chunks: m.chunks,

package/dist/common.js

@@ -1099,7 +1099,7 @@ class APIDataLoader {
                             acc[chunk.id] || (acc[chunk.id] = []), acc[chunk.id].push(asset);
                         }), acc), {}), searchedChunksMap = new Map();
                     return moduleGraph?.modules.filter((module)=>{
-                        module.webpackId.includes(moduleName) && module.chunks.forEach((chunk)=>{
+                        module.identifier.includes(moduleName) && module.chunks.forEach((chunk)=>{
                             searchedChunksMap.has(chunk) || (assetMap[chunk] || []).forEach((asset)=>{
                                 asset.endsWith('.js') && searchedChunksMap.set(chunk, asset);
                             });
@@ -1112,7 +1112,7 @@ class APIDataLoader {
                     this.loader.loadData('root')
                 ]).then((res)=>{
                     let [moduleGraph, root] = res, { moduleName, chunk } = body;
-                    return moduleName ? moduleGraph?.modules.filter((module)=>module.webpackId.includes(moduleName) && module.chunks.includes(chunk)).map((filteredModule)=>({
+                    return moduleName ? moduleGraph?.modules.filter((module)=>module.identifier.includes(moduleName) && module.chunks.includes(chunk)).map((filteredModule)=>({
                             id: filteredModule.id,
                             path: filteredModule.path,
                             relativePath: relative(root, filteredModule.path)
@@ -1168,7 +1168,7 @@ class APIDataLoader {
             case SDK.ServerAPI.API.GetAllModuleGraphFilter:
                 return this.loader.loadData('moduleGraph').then((moduleGraph)=>moduleGraph?.modules.map((m)=>({
                             id: m.id,
-                            webpackId: m.webpackId,
+                            identifier: m.identifier,
                             path: m.path,
                             size: m.size,
                             chunks: m.chunks,

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@rsdoctor/utils",
-  "version": "1.5.11",
+  "version": "2.0.0-alpha.0",
   "repository": {
     "type": "git",
     "url": "https://github.com/web-infra-dev/rsdoctor",
@@ -99,9 +99,9 @@
     "json-stream-stringify": "3.0.1",
     "lines-and-columns": "2.0.4",
     "picocolors": "^1.1.1",
-    "rslog": "^1.3.2",
+    "rslog": "^2.1.1",
     "strip-ansi": "^6.0.1",
-    "@rsdoctor/types": "1.5.11"
+    "@rsdoctor/types": "2.0.0-alpha.0"
   },
   "devDependencies": {
     "@types/babel__code-frame": "7.27.0",
@@ -109,12 +109,12 @@
     "@types/deep-eql": "4.0.2",
     "@types/envinfo": "7.8.4",
     "@types/fs-extra": "^11.0.4",
-    "@types/node": "^22.8.1",
+    "@types/node": "^24.12.3",
     "prebundle": "1.6.4",
-    "filesize": "^10.1.6",
+    "filesize": "^11.0.17",
     "connect": "3.7.0",
     "tslib": "2.8.1",
-    "typescript": "^5.9.2"
+    "typescript": "^6.0.3"
   },
   "publishConfig": {
     "access": "public",