@rpamis/comet 0.4.0-beta.1 → 0.4.0-beta.10

package/eval/local/scripts/compare_baselines.py

@@ -0,0 +1,1144 @@
+# ruff: noqa: E402
+"""Compare comet baseline treatments across the rubric dimensions.
+
+Reads experiment reports from ``local/logs/experiments/<id>/reports/*.json`` and
+emits a markdown comparison report highlighting where the workflow (0.4.0-beta.1) baseline
+scores below the 0.3.9 baseline.
+
+Usage::
+
+    uv run python local/scripts/compare_baselines.py [--experiment <id>] [--report-config <path>]
+
+If ``--experiment`` is omitted the most recent experiment directory is used.
+"""
+
+from __future__ import annotations
+
+import argparse
+import json
+import re
+import statistics
+import sys
+from collections import defaultdict
+from dataclasses import dataclass
+from pathlib import Path
+from typing import Any
+
+EVAL_ROOT = Path(__file__).resolve().parents[2]
+if str(EVAL_ROOT) not in sys.path:
+    sys.path.insert(0, str(EVAL_ROOT))
+if hasattr(sys.stdout, "reconfigure"):
+    sys.stdout.reconfigure(encoding="utf-8")
+if hasattr(sys.stderr, "reconfigure"):
+    sys.stderr.reconfigure(encoding="utf-8")
+
+from scaffold.python.aligned_comparison import build_aligned_report
+from scaffold.python.paths import get_logs_dir
+from scaffold.python.report_outputs import (
+    localize_eval_markdown,
+    load_report_output_config,
+    write_report_outputs,
+)
+from scaffold.python.pass_at_k import pass_metrics_table
+from scaffold.python.sample_quality import quality_from_report, sample_quality_dict
+from scaffold.python.validation.rubric import RUBRIC_DIMENSIONS, _DIMENSION_WEIGHTS
+
+RUBRIC_RE = re.compile(r"\[RUBRIC\]\s+(\S+):\s*([0-9.]+)")
+RUBRIC_JUDGE_RE = re.compile(r"\[RUBRIC-JUDGE\]\s+(\S+):\s*([0-9.]+)")
+RUBRIC_DERIVED_METRICS = ("weighted_score",)
+RUBRIC_DIMENSION_GUIDE = {
+    "main_flow": "Completion of the expected Comet workflow phases.",
+    "gate_guard": "Use of required guard, state transition, and apply checkpoints.",
+    "skill_invocation": "Invocation of Comet, OpenSpec, and Superpowers dependency Skills.",
+    "spec_drift": "Whether build-time spec changes were reconciled before archive.",
+    "business_completion": "Business validator pass rate for the requested task behavior.",
+    "workflow_completion": "Workflow validator pass rate for Comet workflow artifacts.",
+    "efficiency": "Runtime effort score from turns, tool calls, and duration.",
+    "decision_point_compliance": "Whether blocking decision points were surfaced instead of auto-decided.",
+    "artifact_quality": "Whether generated proposal, design, task, and test artifacts are substantive.",
+    "recovery_resilience": "Whether workflow state was preserved and recovered across interruptions.",
+}
+
+# Treatments we compare. CONTROL is included for context but not used in the
+# pass/fail decision.
+TREATMENTS = ("CONTROL", "COMET_FULL_040_BETA", "COMET_FULL_039")
+KNOWN_TREATMENTS = (*TREATMENTS, "COMET_NATIVE_PHASE1")
+WORKFLOW = "COMET_FULL_040_BETA"
+BASELINE = "COMET_FULL_039"
+
+
+@dataclass(frozen=True)
+class ReportPartitions:
+    raw: dict[str, list[dict]]
+    analysis: dict[str, list[dict]]
+    flagged: dict[str, list[dict]]
+    excluded: dict[str, list[dict]]
+
+
+def _treatment_from_report_name(raw_name: str) -> str:
+    for treatment in sorted(KNOWN_TREATMENTS, key=len, reverse=True):
+        if re.search(rf"(?:^|-){re.escape(treatment)}(?:-r\d+)?$", raw_name):
+            return treatment
+    return raw_name
+
+
+def _latest_experiment(logs: Path) -> Path | None:
+    exp_root = logs / "experiments"
+    if not exp_root.exists():
+        return None
+    dirs = sorted([d for d in exp_root.iterdir() if d.is_dir()], key=lambda p: p.stat().st_mtime)
+    return dirs[-1] if dirs else None
+
+
+def _resolve_experiment(value: str, logs: Path) -> Path:
+    """Resolve an experiment id or an explicit local/langsmith experiment path."""
+    supplied = Path(value).expanduser()
+    candidates = [
+        supplied,
+        EVAL_ROOT / supplied,
+        logs / "experiments" / value,
+        EVAL_ROOT / "local" / "logs" / "experiments" / value,
+        EVAL_ROOT / "langsmith" / "logs" / "experiments" / value,
+    ]
+    matches: list[Path] = []
+    seen: set[Path] = set()
+    for candidate in candidates:
+        try:
+            resolved = candidate.resolve()
+        except OSError:
+            continue
+        if resolved in seen or not (resolved / "reports").is_dir():
+            continue
+        seen.add(resolved)
+        matches.append(resolved)
+    if not matches:
+        raise FileNotFoundError(f"Experiment not found: {value}")
+    if len(matches) > 1:
+        rendered = ", ".join(str(path) for path in matches)
+        raise ValueError(f"Experiment id is ambiguous; pass an explicit path: {rendered}")
+    return matches[0]
+
+
+def _run_passed(report: dict) -> bool:
+    """A run 'passes' when its task-level validator has zero failures.
+
+    Rubric [RUBRIC]/[RUBRIC-JUDGE] checks are informational and never appear in
+    checks_failed, so this reflects whether the feature was actually completed.
+    """
+    return len(report.get("checks_failed", [])) == 0
+
+
+def _pass_fail_by_treatment(by_treatment: dict[str, list[dict]]) -> dict[str, list[bool]]:
+    """Per-run pass/fail booleans keyed by treatment id."""
+    return {t: [_run_passed(r) for r in reps] for t, reps in by_treatment.items()}
+
+
+def _rubric_dimension_passed(report: dict, dim: str) -> bool | None:
+    """Return True/False for a rubric dimension, or None when not applicable."""
+    scores = _scores_from_report(report)
+    if dim not in scores:
+        return None
+    return scores[dim] >= 1.0
+
+
+def _pass_fail_by_rubric_dimension(
+    by_treatment: dict[str, list[dict]],
+    dim: str,
+) -> dict[str, list[bool]]:
+    """Per-run pass/fail booleans from a rubric dimension score."""
+    by_metric: dict[str, list[bool]] = {}
+    for treatment, reports in by_treatment.items():
+        values: list[bool] = []
+        for report in reports:
+            passed = _rubric_dimension_passed(report, dim)
+            if passed is not None:
+                values.append(passed)
+        by_metric[treatment] = values
+    return by_metric
+
+
+def _load_reports(experiment_dir: Path) -> dict[str, list[dict]]:
+    """Group report JSON files by treatment name.
+
+    Report ``name`` fields carry the ``<task>-<TREATMENT>`` form (e.g.
+    ``comet-full-workflow-COMET_FULL_040_BETA``); we key by the canonical treatment id
+    (``COMET_FULL_040_BETA``) so the rest of the script can use the short names.
+    """
+    reports_dir = experiment_dir / "reports"
+    by_treatment: dict[str, list[dict]] = defaultdict(list)
+    if not reports_dir.exists():
+        return by_treatment
+    for rf in sorted(reports_dir.glob("*.json")):
+        try:
+            data = json.loads(rf.read_text(encoding="utf-8"))
+        except (json.JSONDecodeError, OSError):
+            continue
+        raw_name = data.get("name", "unknown")
+        # Match the canonical treatment id, allowing pytest repetition suffixes
+        # such as ``COMET_FULL_040_BETA-r1``.
+        name = _treatment_from_report_name(raw_name)
+        by_treatment[name].append(data)
+    return by_treatment
+
+
+def _partition_reports(
+    by_treatment: dict[str, list[dict]],
+    experiment_dir: Path,
+) -> ReportPartitions:
+    analysis: dict[str, list[dict]] = defaultdict(list)
+    flagged: dict[str, list[dict]] = defaultdict(list)
+    excluded: dict[str, list[dict]] = defaultdict(list)
+
+    for treatment, reports in by_treatment.items():
+        for report in reports:
+            quality = quality_from_report(report, experiment_dir=experiment_dir)
+            if quality.status == "excluded" or not quality.include_in_analysis:
+                excluded[treatment].append(report)
+            else:
+                analysis[treatment].append(report)
+                if quality.status == "flagged":
+                    flagged[treatment].append(report)
+
+    return ReportPartitions(
+        raw={key: list(value) for key, value in by_treatment.items()},
+        analysis={key: list(value) for key, value in analysis.items()},
+        flagged={key: list(value) for key, value in flagged.items()},
+        excluded={key: list(value) for key, value in excluded.items()},
+    )
+
+
+def _quality_counts(partitions: ReportPartitions, treatment: str) -> tuple[int, int, int, int]:
+    raw = len(partitions.raw.get(treatment, []))
+    analysis_set = len(partitions.analysis.get(treatment, []))
+    flagged = len(partitions.flagged.get(treatment, []))
+    excluded = len(partitions.excluded.get(treatment, []))
+    return raw, analysis_set, flagged, excluded
+
+
+def _report_ref(report: dict) -> str:
+    return (
+        (report.get("events_summary", {}).get("artifact_references") or {}).get("report")
+        or report.get("run_id")
+        or "none"
+    )
+
+
+def _scores_from_report(report: dict) -> dict[str, float]:
+    """Parse rubric scores from a single report's passed checks."""
+    scores: dict[str, float] = {}
+    for check in report.get("checks_passed", []):
+        m = RUBRIC_RE.search(check)
+        if m:
+            try:
+                scores[m.group(1)] = float(m.group(2))
+            except ValueError:
+                continue
+    return scores
+
+
+def _judge_scores_from_report(report: dict) -> dict[str, float]:
+    """Parse [RUBRIC-JUDGE] overlay scores (if LLM judge ran)."""
+    scores: dict[str, float] = {}
+    for check in report.get("checks_passed", []):
+        m = RUBRIC_JUDGE_RE.search(check)
+        if m:
+            try:
+                scores[m.group(1)] = float(m.group(2))
+            except ValueError:
+                continue
+    return scores
+
+
+def _aggregate_judge(reports: list[dict]) -> dict[str, dict[str, float]]:
+    """Judge-overlay distribution stats (same shape as _aggregate)."""
+    per_dim: dict[str, list[float]] = defaultdict(list)
+    for rep in reports:
+        for dim, score in _judge_scores_from_report(rep).items():
+            per_dim[dim].append(score)
+    result: dict[str, dict[str, float]] = {}
+    for dim in ("artifact_quality", "spec_drift", "main_flow"):
+        vals = per_dim.get(dim, [])
+        n = len(vals)
+        if not vals:
+            result[dim] = {
+                "mean": 0.0,
+                "stdev": 0.0,
+                "min": 0.0,
+                "max": 0.0,
+                "pass_rate": 0.0,
+                "n": 0,
+            }
+            continue
+        result[dim] = {
+            "mean": statistics.fmean(vals),
+            "stdev": statistics.pstdev(vals) if len(vals) > 1 else 0.0,
+            "min": min(vals),
+            "max": max(vals),
+            "pass_rate": sum(1 for v in vals if v >= 0.5) / n,
+            "n": n,
+        }
+    return result
+
+
+def _aggregate(reports: list[dict]) -> dict[str, dict[str, float]]:
+    """Per-dimension distribution stats across a treatment's reports.
+
+    Returns ``{dim: {mean, stdev, min, max, pass_rate, n}}`` where pass_rate is
+    the fraction of runs scoring >= 0.5 on that dimension (a "mostly passed"
+    threshold) and n is the run count with a score for that dimension.
+    """
+    per_dim: dict[str, list[float]] = defaultdict(list)
+    for rep in reports:
+        for dim, score in _scores_from_report(rep).items():
+            per_dim[dim].append(score)
+    result: dict[str, dict[str, float]] = {}
+    for dim in tuple(RUBRIC_DIMENSIONS) + RUBRIC_DERIVED_METRICS:
+        vals = per_dim.get(dim, [])
+        n = len(vals)
+        if not vals:
+            result[dim] = {
+                "mean": 0.0,
+                "stdev": 0.0,
+                "min": 0.0,
+                "max": 0.0,
+                "pass_rate": 0.0,
+                "n": 0,
+            }
+            continue
+        mean = statistics.fmean(vals)
+        stdev = statistics.pstdev(vals) if len(vals) > 1 else 0.0
+        result[dim] = {
+            "mean": mean,
+            "stdev": stdev,
+            "min": min(vals),
+            "max": max(vals),
+            "pass_rate": sum(1 for v in vals if v >= 0.5) / n,
+            "n": n,
+        }
+    return result
+
+
+def _overall(agg: dict[str, dict[str, float]]) -> float:
+    """Use weighted_score if available, otherwise fall back to unweighted mean."""
+    # weighted_score is computed by the new binary-check + weighted aggregation
+    weighted = agg.get("weighted_score", {})
+    if weighted and weighted.get("n", 0) > 0:
+        return weighted["mean"]
+    # Fallback: mean of per-dimension means (legacy behavior)
+    vals = [agg.get(d, {}).get("mean", 0.0) for d in RUBRIC_DIMENSIONS]
+    return statistics.fmean(vals) if vals else 0.0
+
+
+def _fmt_dim(stats: dict[str, float] | None, with_dist: bool = False) -> str:
+    """Format a dimension cell. With distribution: 'mean±std (pass%)'."""
+    if not stats or stats.get("n", 0) == 0:
+        return "/"
+    mean = stats["mean"]
+    if not with_dist or stats["n"] < 2:
+        return f"{mean:.2f}"
+    return f"{mean:.2f}±{stats['stdev']:.2f} ({stats['pass_rate'] * 100:.0f}%)"
+
+
+def _sum_metric(reports: list[dict], key: str) -> int | float | None:
+    values = [
+        rep.get("events_summary", {}).get(key)
+        for rep in reports
+        if rep.get("events_summary", {}).get(key) is not None
+    ]
+    return sum(values) if values else None
+
+
+def _fmt_tokens(value: int | float | None) -> str:
+    return "N/A" if value is None else f"{value:,.0f}"
+
+
+def _fmt_cost(value: int | float | None) -> str:
+    return "N/A" if value is None else f"${value:.4f}"
+
+
+def _fmt_seconds(value: int | float | None) -> str:
+    return "N/A" if value is None else f"{value:,.0f}s"
+
+
+def _fmt_average(value: int | float | None, decimals: int = 1) -> str:
+    return "N/A" if value is None else f"{value:,.{decimals}f}"
+
+
+def _quality_run_rows(
+    reports: list[dict],
+    treatment: str,
+    experiment_dir: Path,
+    *,
+    include_column: bool,
+) -> list[str]:
+    rows: list[str] = []
+    for report in reports:
+        quality = sample_quality_dict(report, experiment_dir=experiment_dir)
+        task = _task_name(report, treatment)
+        evidence = _quality_evidence_summary(quality.get("evidence", []))
+        include_text = (
+            f" | {'yes' if quality.get('include_in_analysis') else 'no'}" if include_column else ""
+        )
+        rows.append(
+            f"| `{report.get('run_id') or 'n/a'}` | {task} | {treatment} | "
+            f"{quality.get('reason_code')} | {evidence}{include_text} | {_report_ref(report)} |"
+        )
+    return rows
+
+
+def _quality_evidence_summary(evidence_items: list[Any]) -> str:
+    raw = "\n".join(str(item) for item in evidence_items if item)
+    if not raw:
+        return "none"
+
+    loop_lines = re.findall(r"^\s*\[loop\]\s+(.+)$", raw, flags=re.MULTILINE)
+    if loop_lines:
+        finished = re.search(r"\[loop\]\s+finished after\s+(\d+)\s+turns?", raw)
+        turn_numbers = [
+            int(match.group(1))
+            for match in re.finditer(r"\[loop\]\s+turn\s+(\d+)/\d+", raw)
+        ]
+        turns = int(finished.group(1)) if finished else (max(turn_numbers) if turn_numbers else 0)
+        replies = len(re.findall(r"\[loop\]\s+simulated reply", raw))
+        turn_text = f"{turns} {'turn' if turns == 1 else 'turns'}"
+        reply_text = f"{replies} simulated decision {'reply' if replies == 1 else 'replies'}"
+        return f"loop trace: {turn_text}; {reply_text}; see report JSON for full evidence"
+
+    summary = "; ".join(_collapse_table_cell_text(str(item)) for item in evidence_items[:2] if item)
+    if len(summary) > 220:
+        summary = f"{summary[:217].rstrip()}..."
+    return summary or "none"
+
+
+def _collapse_table_cell_text(value: str) -> str:
+    return re.sub(r"\s+", " ", value.replace("|", "/")).strip()
+
+
+def _overall_by_reports(reports: list[dict]) -> float | None:
+    if not reports:
+        return None
+    return _overall(_aggregate(reports))
+
+
+def _fmt_optional_score(value: float | None) -> str:
+    return "—" if value is None else f"{value:.2f}"
+
+
+def _source_summary(report: dict, quality: dict[str, Any]) -> str:
+    events = report.get("events_summary", {})
+    run_id = report.get("run_id") or "n/a"
+    profile = events.get("profile") or "n/a"
+    sources = events.get("skill_sources") or []
+    source_text = (
+        ", ".join(
+            (
+                f"{item.get('name', 'skill')}@{item.get('hash', item.get('path', 'unknown'))}"
+                if isinstance(item, dict)
+                else str(item)
+            )
+            for item in sources
+        )
+        or "none"
+    )
+    manifest = events.get("eval_manifest") or "none"
+    report_ref = (events.get("artifact_references") or {}).get("report", "none")
+    return (
+        f"| `{run_id}` | {quality.get('status')} | {quality.get('reason_code')} | "
+        f"{profile} | {source_text} | {manifest} | {report_ref} |"
+    )
+
+
+def _task_name(report: dict, treatment: str) -> str:
+    raw_name = str(report.get("name") or "unknown")
+    match = re.match(rf"^(.*)-{re.escape(treatment)}(?:-r\d+)?$", raw_name)
+    if match:
+        return match.group(1)
+    return raw_name
+
+
+def _task_outcomes(by_treatment: dict[str, list[dict]]) -> dict[str, dict[str, bool]]:
+    outcomes: dict[str, dict[str, bool]] = {}
+    for treatment in TREATMENTS:
+        for report in by_treatment.get(treatment, []):
+            task = _task_name(report, treatment)
+            outcomes.setdefault(task, {})[treatment] = _run_passed(report)
+    return outcomes
+
+
+# --- Attribution (improvement 2) -------------------------------------------
+# Classify a failed check into one of three buckets:
+#   business  - the requested business behavior did not pass validation
+#   workflow  - the skill guidance is wrong/missing (skill not invoked, guard not used)
+#   task      - the task/validator itself is ambiguous or buggy
+#   uncategorized - valid completed failure that does not match a specific bucket
+_ATTRIBUTION_RULES = [
+    # (regex on failed-check text, bucket, reason)
+    (
+        re.compile(r"business validator failed|business[_ -]?completion", re.I),
+        "business",
+        "business implementation did not pass validation",
+    ),
+    (
+        re.compile(r"workflow validator failed|workflow[_ -]?completion", re.I),
+        "workflow",
+        "workflow validation did not pass",
+    ),
+    (
+        re.compile(r"skill.*(not invoke|not found)|did not invoke", re.I),
+        "workflow",
+        "skill was not invoked — workflow guidance failed to trigger the skill",
+    ),
+    (
+        re.compile(r"guard|state|apply|transition", re.I),
+        "workflow",
+        "guard/state machinery not exercised — workflow did not drive phase transitions",
+    ),
+    (
+        re.compile(r"--sentences|sentence_feature|wordcount", re.I),
+        "business",
+        "feature implementation incomplete",
+    ),
+    (
+        re.compile(r"openspec_artifacts|not found in.*archive|directory not found", re.I),
+        "task",
+        "artifact path/layout mismatch — likely task/validator path assumption",
+    ),
+    (
+        re.compile(r"comet_state|\.comet\.yaml", re.I),
+        "workflow",
+        "comet state file missing — workflow did not initialise state machine",
+    ),
+    (
+        re.compile(r"tests_exist|no.*tests", re.I),
+        "workflow",
+        "expected tests were not written",
+    ),
+]
+
+
+def _attribute_failure(check_text: str) -> tuple[str, str]:
+    """Return (bucket, reason) for a failed check."""
+    for rx, bucket, reason in _ATTRIBUTION_RULES:
+        if rx.search(check_text):
+            return bucket, reason
+    return "uncategorized", "uncategorized valid failure"
+
+
+def _attributions(reports: list[dict]) -> dict[str, list[str]]:
+    """Bucket all failed checks across a treatment's runs by attribution."""
+    buckets: dict[str, list[str]] = defaultdict(list)
+    for rep in reports:
+        structured = rep.get("events_summary", {}).get("failure_attribution") or []
+        if structured:
+            for item in structured:
+                bucket = item.get("bucket", "uncategorized")
+                buckets[bucket].append(
+                    f"{item.get('check', '')}  ->  [{bucket}] {item.get('reason', '')}"
+                )
+            continue
+        for fail in rep.get("checks_failed", []):
+            # Skip rubric informational checks (they never fail, but be safe)
+            if "[RUBRIC]" in fail:
+                continue
+            bucket, reason = _attribute_failure(fail)
+            buckets[bucket].append(f"{fail}  →  [{bucket}] {reason}")
+    return buckets
+
+
+def _summarize_attribution_items(items: list[str]) -> list[str]:
+    """Collapse repeated failure causes while preserving first-seen order."""
+    counts: dict[str, int] = {}
+    for item in items:
+        counts[item] = counts.get(item, 0) + 1
+    summarized = []
+    for item, count in counts.items():
+        summarized.append(f"x{count} {item}" if count > 1 else item)
+    return summarized
+
+
+def build_report(experiment_dir: Path) -> str:
+    raw_by_treatment = _load_reports(experiment_dir)
+    partitions = _partition_reports(raw_by_treatment, experiment_dir)
+    by_treatment = partitions.analysis
+    aggregated = {t: _aggregate(reps) for t, reps in by_treatment.items() if reps}
+
+    lines: list[str] = []
+    lines.append("# Comet Baseline Comparison Report")
+    lines.append("")
+    lines.append(f"- Experiment: `{experiment_dir.name}`")
+    lines.append(f"- Treatments with data: {', '.join(sorted(raw_by_treatment)) or 'none'}")
+    lines.append("")
+
+    if not raw_by_treatment:
+        lines.append("No report data found. Run the eval suite first.")
+        return "\n".join(lines)
+
+    lines.append("## Metric guide")
+    lines.append("")
+    lines.append("| Metric | Meaning | Source | Report section |")
+    lines.append("|--------|---------|--------|----------------|")
+    lines.append("| `raw runs` | All discovered report JSON files before quality filtering. | report files | Data quality summary |")
+    lines.append("| `analysis set` | Runs included in comparison metrics after excluding hard infrastructure noise. | sample_quality.include_in_analysis | Data quality summary / Run counts |")
+    lines.append("| `flagged` | Completed runs kept in analysis but marked as suspicious, usually harness/task/observability risk. | sample_quality.status | Data quality summary / Flagged runs |")
+    lines.append("| `excluded` | Runs removed from headline metrics, typically API, quota, auth, network, container, or runner failures before a complete result. | sample_quality.status | Data quality summary / Excluded runs |")
+    lines.append("| `pass@k` | Probability that at least one of k attempts succeeds; capability ceiling. | pass/fail booleans | pass@k / pass^k |")
+    lines.append("| `pass^k` | Probability that all k attempts succeed; reliability floor. | pass/fail booleans | pass@k / pass^k |")
+    lines.append("| `overall` | Run passes when task-level `checks_failed == []`. | checks_failed | pass@k / Task outcomes |")
+    lines.append("| `business_completion` | Business validator pass rate; CONTROL is evaluated on this without requiring Comet workflow artifacts. | `[RUBRIC] business_completion` | Rubric dimensions / pass@k |")
+    lines.append("| `workflow_completion` | Comet workflow validator pass rate; `/` means not applicable for CONTROL. | `[RUBRIC] workflow_completion` | Rubric dimensions / pass@k |")
+    lines.append("| `weighted_score` | Weighted average across applicable rubric dimensions; N/A dimensions are skipped. | `[RUBRIC] weighted_score` | Rubric dimensions / Overall |")
+    lines.append("| `tokens` / `cost` | Total model token and USD cost telemetry for included runs. | events_summary | Spend summary |")
+    lines.append("| `turns` / `duration` / `tool calls` | Runtime effort telemetry for included runs; also feeds the `efficiency` rubric. | events_summary | Runtime summary / Rubric dimensions |")
+    lines.append("| `run-level failed checks` | Buckets sample-level `checks_failed` entries into harness, business, workflow, task, or uncategorized causes; this is not the same as the task outcome matrix. | checks_failed / events_summary.failure_attribution | Run-level failed checks |")
+    lines.append("| `source evidence` | Run id, quality status, profile, Skill source hashes, eval manifest, and raw report reference. | events_summary / sample_quality | Source evidence |")
+    lines.append("")
+
+    lines.append("## Data quality summary")
+    lines.append("")
+    lines.append("| Treatment | Raw runs | Analysis set | Flagged | Excluded |")
+    lines.append("|-----------|----------|--------------|---------|----------|")
+    for t in TREATMENTS:
+        raw, analysis_set, flagged, excluded = _quality_counts(partitions, t)
+        if raw == 0:
+            continue
+        lines.append(f"| {t} | {raw} | {analysis_set} | {flagged} | {excluded} |")
+    lines.append("")
+
+    lines.append("## Run counts")
+    lines.append("")
+    lines.append("_Analysis set only; excluded hard-noise runs are omitted._")
+    lines.append("")
+    lines.append("| Treatment | Runs |")
+    lines.append("|-----------|------|")
+    for t in TREATMENTS:
+        if t in by_treatment:
+            lines.append(f"| {t} | {len(by_treatment[t])} |")
+    lines.append("")
+
+    has_dist = any(len(by_treatment.get(t, [])) >= 2 for t in TREATMENTS)
+
+    pass_fail_metrics = {
+        "overall": _pass_fail_by_treatment(by_treatment),
+        "business": _pass_fail_by_rubric_dimension(by_treatment, "business_completion"),
+        "workflow": _pass_fail_by_rubric_dimension(by_treatment, "workflow_completion"),
+    }
+    max_n = max(
+        (len(v) for metric_values in pass_fail_metrics.values() for v in metric_values.values()),
+        default=0,
+    )
+    ks = [k for k in (1, 2, 3, 5) if k <= max_n] or [1]
+
+    lines.append("## pass@k / pass^k — capability vs reliability")
+    lines.append("")
+    lines.append("- **pass@k**: probability ≥1 of k attempts succeeds (capability ceiling)")
+    lines.append("- **pass^k**: probability all k attempts succeed (reliability floor)")
+    lines.append("- **overall**: run passes when `checks_failed == []`.")
+    lines.append("- **business**: run passes when `business_completion == 1.00`.")
+    lines.append("- **workflow**: run passes when `workflow_completion == 1.00`; `/` means not applicable.")
+    lines.append(
+        "- The gap (pass@k − pass^k) measures instability: high ceiling, low floor = unreliable."
+    )
+    lines.append("")
+    header_cells = ["Metric", "Treatment"]
+    for k in ks:
+        header_cells.append(f"pass@{k}")
+    for k in ks:
+        header_cells.append(f"pass^{k}")
+    header_cells.append("pass/fail")
+    lines.append("| " + " | ".join(header_cells) + " |")
+    lines.append("|" + "|".join(["---"] * len(header_cells)) + "|")
+    for metric_name, metric_values in pass_fail_metrics.items():
+        ptable = pass_metrics_table(metric_values, ks=ks)
+        for t in TREATMENTS:
+            values = metric_values.get(t, [])
+            if not values:
+                cells = [metric_name, t] + ["/"] * (len(ks) * 2 + 1)
+                lines.append("| " + " | ".join(cells) + " |")
+                continue
+            cells = [metric_name, t]
+            for k in ks:
+                cells.append(f"{ptable[t][k]['pass_at_k']:.2f}")
+            for k in ks:
+                cells.append(f"{ptable[t][k]['pass_pow_k']:.0f}")
+            c = ptable[t][ks[0]]["c"]
+            n = ptable[t][ks[0]]["n"]
+            cells.append(f"{c}/{n}")
+            lines.append("| " + " | ".join(cells) + " |")
+    lines.append("")
+    if max_n < 2:
+        lines.append(
+            f"_Only {max_n} run per treatment — pass@k/pass^k for k>1 need ≥2 runs "
+            "to be meaningful. Use ``--count 5``._"
+        )
+        lines.append("")
+
+    task_outcomes = _task_outcomes(by_treatment)
+    if task_outcomes:
+        lines.append("## Task outcomes")
+        lines.append("")
+        lines.append("| Task | " + " | ".join(TREATMENTS) + " |")
+        lines.append("|------|" + "|".join(["------"] * len(TREATMENTS)) + "|")
+        for task in sorted(task_outcomes):
+            cells = [task]
+            for treatment in TREATMENTS:
+                if treatment not in task_outcomes[task]:
+                    cells.append("—")
+                else:
+                    cells.append("PASS" if task_outcomes[task][treatment] else "FAIL")
+            lines.append("| " + " | ".join(cells) + " |")
+        lines.append("")
+
+    lines.append("## Spend summary")
+    lines.append("")
+    lines.append("| Treatment | Runs | Tokens | Cost | Avg Tokens/Run | Avg Cost/Run |")
+    lines.append("|-----------|------|--------|------|----------------|--------------|")
+    for t in TREATMENTS:
+        reps = by_treatment.get(t, [])
+        if not reps:
+            continue
+        total_tokens = _sum_metric(reps, "total_tokens")
+        total_cost = _sum_metric(reps, "total_cost_usd")
+        avg_tokens = (total_tokens / len(reps)) if total_tokens is not None else None
+        avg_cost = (total_cost / len(reps)) if total_cost is not None else None
+        lines.append(
+            f"| {t} | {len(reps)} | {_fmt_tokens(total_tokens)} | "
+            f"{_fmt_cost(total_cost)} | {_fmt_tokens(avg_tokens)} | "
+            f"{_fmt_cost(avg_cost)} |"
+        )
+    lines.append("")
+
+    lines.append("## Runtime summary")
+    lines.append("")
+    lines.append("| Treatment | Runs | Turns | Duration | Tool Calls | Avg Turns/Run | Avg Duration/Run | Avg Tool Calls/Run |")
+    lines.append("|-----------|------|-------|----------|------------|---------------|------------------|--------------------|")
+    for t in TREATMENTS:
+        reps = by_treatment.get(t, [])
+        if not reps:
+            continue
+        total_turns = _sum_metric(reps, "num_turns")
+        total_duration = _sum_metric(reps, "duration_seconds")
+        total_tool_calls = _sum_metric(reps, "tool_calls")
+        avg_turns = (total_turns / len(reps)) if total_turns is not None else None
+        avg_duration = (total_duration / len(reps)) if total_duration is not None else None
+        avg_tool_calls = (
+            (total_tool_calls / len(reps)) if total_tool_calls is not None else None
+        )
+        lines.append(
+            f"| {t} | {len(reps)} | {_fmt_tokens(total_turns)} | "
+            f"{_fmt_seconds(total_duration)} | {_fmt_tokens(total_tool_calls)} | "
+            f"{_fmt_average(avg_turns)} | {_fmt_seconds(avg_duration)} | "
+            f"{_fmt_average(avg_tool_calls)} |"
+        )
+    lines.append("")
+
+    lines.append("## Source evidence")
+    lines.append("")
+    lines.append("Use this section to trace each aggregate metric back to the raw run artifacts.")
+    lines.append("")
+    lines.append("- `Run` is the run id or fallback report id.")
+    lines.append("- `Quality` is the sample-quality status used by the analysis-set filter.")
+    lines.append("- `Reason` explains why the run is included, flagged, or excluded.")
+    lines.append("- `Profile` is the eval rubric/profile that scored the run.")
+    lines.append("- `Skill sources` records installed Skill identity or hash evidence when the run provides it.")
+    lines.append("- `Eval manifest` is the task manifest that defined the evaluated scenario.")
+    lines.append("- `Report` points to the raw per-run report JSON for deeper inspection.")
+    lines.append("")
+    lines.append("| Run | Quality | Reason | Profile | Skill sources | Eval manifest | Report |")
+    lines.append("|-----|---------|--------|---------|---------------|---------------|--------|")
+    for treatment in TREATMENTS:
+        for rep in raw_by_treatment.get(treatment, []):
+            quality = sample_quality_dict(rep, experiment_dir=experiment_dir)
+            lines.append(_source_summary(rep, quality))
+    lines.append("")
+
+    label = "(mean±stdev, pass-rate across runs; 0.00–1.00)" if has_dist else "(mean, 0.00–1.00)"
+    lines.append(f"## Rubric dimensions {label}")
+    lines.append("")
+    lines.append(
+        "_Scores are binary pass-rates (0.0-1.0). Overall uses the "
+        "validator-emitted weighted_score when available (see weights below)._"
+    )
+    lines.append("")
+    lines.append("### Dimension guide")
+    lines.append("")
+    lines.append("| Dimension | Meaning |")
+    lines.append("|-----------|---------|")
+    for dim in RUBRIC_DIMENSIONS:
+        lines.append(f"| {dim} | {RUBRIC_DIMENSION_GUIDE[dim]} |")
+    lines.append("")
+
+    header = "| Dimension | " + " | ".join(TREATMENTS) + " | Δ (workflow−baseline) |"
+    sep = "|-----------|" + "|".join(["------"] * len(TREATMENTS)) + "|------|"
+    lines.append(header)
+    lines.append(sep)
+
+    regressions: list[tuple[str, float, float]] = []
+    for dim in RUBRIC_DIMENSIONS:
+        row = [f"{dim}"]
+        wf_stats = aggregated.get(WORKFLOW, {}).get(dim)
+        bl_stats = aggregated.get(BASELINE, {}).get(dim)
+        for t in TREATMENTS:
+            row.append(_fmt_dim(aggregated.get(t, {}).get(dim), with_dist=has_dist))
+        if wf_stats and bl_stats:
+            delta = wf_stats["mean"] - bl_stats["mean"]
+            row.append(f"{delta:+.2f}" + (" ⚠️" if delta < -0.05 else ""))
+            if delta < -0.05:
+                regressions.append((dim, wf_stats["mean"], bl_stats["mean"]))
+        else:
+            row.append("—")
+        lines.append("| " + " | ".join(row) + " |")
+    lines.append("")
+
+    lines.append(
+        "| **Overall** | "
+        + " | ".join(
+            (f"{_overall(aggregated[t]):.2f}" if t in aggregated else "—") for t in TREATMENTS
+        )
+        + " | "
+        + (
+            f"{_overall(aggregated[WORKFLOW]) - _overall(aggregated[BASELINE]):+.2f}"
+            if WORKFLOW in aggregated and BASELINE in aggregated
+            else "—"
+        )
+        + " |"
+    )
+    lines.append("")
+
+    lines.append("### Dimension weights")
+    lines.append("")
+    lines.append("| Dimension | Weight |")
+    lines.append("|-----------|--------|")
+    for dim in RUBRIC_DIMENSIONS:
+        weight = _DIMENSION_WEIGHTS.get(dim, 1.0)
+        lines.append(f"| {dim} | {weight:.1f} |")
+    lines.append("")
+
+    excluded_total = sum(len(items) for items in partitions.excluded.values())
+    if excluded_total:
+        lines.append("## Excluded runs")
+        lines.append("")
+        lines.append("| Run | Task | Treatment | Reason | Evidence | Report |")
+        lines.append("|-----|------|-----------|--------|----------|--------|")
+        for treatment in TREATMENTS:
+            lines.extend(
+                _quality_run_rows(
+                    partitions.excluded.get(treatment, []),
+                    treatment,
+                    experiment_dir,
+                    include_column=False,
+                )
+            )
+        lines.append("")
+
+    flagged_total = sum(len(items) for items in partitions.flagged.values())
+    if flagged_total:
+        lines.append("## Flagged runs")
+        lines.append("")
+        lines.append("| Run | Task | Treatment | Reason | Evidence | Included? | Report |")
+        lines.append("|-----|------|-----------|--------|----------|-----------|--------|")
+        for treatment in TREATMENTS:
+            lines.extend(
+                _quality_run_rows(
+                    partitions.flagged.get(treatment, []),
+                    treatment,
+                    experiment_dir,
+                    include_column=True,
+                )
+            )
+        lines.append("")
+
+    lines.append("## Raw vs analysis sensitivity")
+    lines.append("")
+    lines.append("| Metric | Raw | Analysis | Delta |")
+    lines.append("|--------|-----|----------|-------|")
+    for treatment in TREATMENTS:
+        raw_value = _overall_by_reports(raw_by_treatment.get(treatment, []))
+        analysis_value = _overall_by_reports(by_treatment.get(treatment, []))
+        if raw_value is None and analysis_value is None:
+            continue
+        delta = (
+            "—"
+            if raw_value is None or analysis_value is None
+            else f"{analysis_value - raw_value:+.2f}"
+        )
+        lines.append(
+            f"| {treatment} overall | {_fmt_optional_score(raw_value)} | "
+            f"{_fmt_optional_score(analysis_value)} | {delta} |"
+        )
+    lines.append("")
+
+    lines.append("## Run-level failed checks")
+    lines.append("")
+    lines.append(
+        "These are sample-level `checks_failed` entries. They can coexist with "
+        "`workflow_completion == 1.00`, `pass@k == 1.00`, or a passing task outcome "
+        "because they describe stricter run-contract failures rather than the "
+        "workflow artifact completion score or the task outcome matrix."
+    )
+    lines.append("")
+    lines.append(
+        "Each failed baseline check is bucketed as **harness** (runner/trigger issue), "
+        "**business** (requested behavior issue), **workflow** (skill guidance or workflow "
+        "artifact issue), **task** (task/validator issue), or **uncategorized** "
+        "(valid completed failure that needs inspection)."
+    )
+    lines.append("")
+    any_failures = False
+    for t in TREATMENTS:
+        attr = _attributions(raw_by_treatment.get(t, []))
+        total = sum(len(v) for v in attr.values())
+        if total == 0:
+            continue
+        any_failures = True
+        lines.append(f"### {t} ({total} failure(s))")
+        lines.append("")
+        for bucket in ("harness", "business", "workflow", "task", "uncategorized"):
+            items = attr.get(bucket, [])
+            if not items:
+                continue
+            lines.append(f"- **{bucket}** ({len(items)}):")
+            for item in _summarize_attribution_items(items):
+                lines.append(f"  - {item}")
+        lines.append("")
+    if not any_failures:
+        lines.append("_No baseline check failures across treatments._")
+        lines.append("")
+
+    lines.append("## Verdict")
+    lines.append("")
+    key_treatments = (WORKFLOW, BASELINE)
+    missing_clean = [t for t in key_treatments if not by_treatment.get(t)]
+    noisy_majority = []
+    for t in key_treatments:
+        raw, _included, _flagged, excluded = _quality_counts(partitions, t)
+        if raw > 0 and excluded / raw > 0.5:
+            noisy_majority.append(t)
+
+    if missing_clean:
+        lines.append(
+            "⚠️ **Insufficient clean data**: analysis set has no included runs for "
+            + ", ".join(f"`{t}`" for t in missing_clean)
+            + ". Rerun the affected task/treatment pairs or inspect the excluded runs above."
+        )
+    elif noisy_majority:
+        lines.append(
+            "⚠️ **Inconclusive due to data quality**: more than half of the raw runs were "
+            "excluded for "
+            + ", ".join(f"`{t}`" for t in noisy_majority)
+            + ". The analysis metrics are shown, but the A/B verdict should not be treated as final."
+        )
+    elif WORKFLOW not in aggregated or BASELINE not in aggregated:
+        lines.append(f"Insufficient data: need both `{WORKFLOW}` and `{BASELINE}` runs.")
+    elif regressions:
+        lines.append(
+            f"❌ **Workflow regresses on {len(regressions)} dimension(s) vs 0.3.9 baseline:**"
+        )
+        lines.append("")
+        for dim, wf, bl in regressions:
+            lines.append(f"- **{dim}**: workflow {wf:.2f} < baseline {bl:.2f} (Δ {wf - bl:+.2f})")
+        lines.append("")
+        lines.append(
+            "See the run-level failed checks section above and the events/raw logs "
+            "for root-cause analysis."
+        )
+    else:
+        wf_overall = _overall(aggregated[WORKFLOW])
+        bl_overall = _overall(aggregated[BASELINE])
+        if wf_overall >= bl_overall:
+            lines.append(
+                f"✅ **Workflow is stable**: overall {wf_overall:.2f} ≥ "
+                f"baseline {bl_overall:.2f}, no dimension regresses beyond "
+                "the 0.05 tolerance."
+            )
+        else:
+            lines.append(
+                f"⚠️ **Workflow overall lower** ({wf_overall:.2f} < {bl_overall:.2f}) "
+                f"but no single dimension regresses beyond tolerance."
+            )
+
+    if (
+        not missing_clean
+        and not noisy_majority
+        and WORKFLOW in aggregated
+        and BASELINE in aggregated
+    ):
+        raw, included, flagged, excluded = _quality_counts(partitions, WORKFLOW)
+        lines.append("")
+        lines.append(
+            f"_Verdict uses analysis set: `{WORKFLOW}` included {included}/{raw} raw run(s), "
+            f"flagged {flagged}, excluded {excluded}._"
+        )
+
+    if has_dist:
+        lines.append("")
+        lines.append("_Distribution stats computed from ≥2 runs per treatment._")
+
+    judge_aggregated = {t: _aggregate_judge(reps) for t, reps in by_treatment.items() if reps}
+    has_judge = any(
+        stats.get(d, {}).get("n", 0) > 0
+        for stats in judge_aggregated.values()
+        for d in ("artifact_quality", "spec_drift", "main_flow")
+    )
+    if has_judge:
+        lines.append("")
+        lines.append("## LLM-judge overlay (rule vs judge)")
+        lines.append("")
+        lines.append(
+            "Independent LLM re-scored the three qualitative dimensions by reading "
+            "the actual artifacts. Large rule-vs-judge gaps flag heuristic weaknesses."
+        )
+        lines.append("")
+        lines.append("| Dimension | Treatment | Rule | Judge | Gap |")
+        lines.append("|-----------|-----------|------|-------|-----|")
+        for dim in ("artifact_quality", "spec_drift", "main_flow"):
+            for t in TREATMENTS:
+                rule_stats = aggregated.get(t, {}).get(dim, {})
+                judge_stats = judge_aggregated.get(t, {}).get(dim, {})
+                rule = rule_stats.get("mean") if rule_stats.get("n") else None
+                judge = judge_stats.get("mean") if judge_stats.get("n") else None
+                if rule is None and judge is None:
+                    continue
+                gap = f"{judge - rule:+.2f}" if (rule is not None and judge is not None) else "—"
+                lines.append(
+                    f"| {dim} | {t} | {_fmt_optional_score(rule)} | "
+                    f"{_fmt_optional_score(judge)} | {gap} |"
+                )
+        lines.append("")
+
+    return "\n".join(lines)
+
+
+def main(argv: list[str] | None = None) -> int:
+    parser = argparse.ArgumentParser(description=__doc__)
+    parser.add_argument("--experiment", default=None, help="Experiment id (defaults to latest)")
+    parser.add_argument(
+        "--out",
+        default=None,
+        help="Output path (defaults to <experiment>/comparison_report.md)",
+    )
+    parser.add_argument("--report-config", default=None, help="JSON/YAML config for report outputs")
+    parser.add_argument(
+        "--language",
+        choices=("en", "zh"),
+        default="en",
+        help="Language used by generated Markdown and HTML report bodies",
+    )
+    parser.add_argument(
+        "--candidate-experiment",
+        default=None,
+        help="Candidate experiment id or path for strict two-experiment alignment",
+    )
+    parser.add_argument(
+        "--baseline-experiment",
+        default=None,
+        help="Baseline experiment id or path for strict two-experiment alignment",
+    )
+    parser.add_argument(
+        "--candidate-treatment",
+        default="COMET_NATIVE_PHASE1",
+        help="Treatment selected from the candidate experiment",
+    )
+    parser.add_argument(
+        "--baseline-treatment",
+        default="COMET_FULL_040_BETA",
+        help="Treatment selected from the baseline experiment",
+    )
+    parser.add_argument(
+        "--ks",
+        default="1,2,3",
+        help="Comma-separated k values for strict task-macro pass metrics",
+    )
+    args = parser.parse_args(argv)
+
+    logs = get_logs_dir()
+    aligned_mode = bool(args.candidate_experiment or args.baseline_experiment)
+    if aligned_mode:
+        if not args.candidate_experiment or not args.baseline_experiment:
+            print(
+                "--candidate-experiment and --baseline-experiment must be provided together",
+                file=sys.stderr,
+            )
+            return 2
+        if args.experiment:
+            print(
+                "--experiment cannot be combined with two-experiment alignment",
+                file=sys.stderr,
+            )
+            return 2
+        try:
+            ks = tuple(int(item.strip()) for item in args.ks.split(",") if item.strip())
+        except ValueError:
+            print("--ks must be a comma-separated list of integers", file=sys.stderr)
+            return 2
+        if not ks or any(k < 1 for k in ks):
+            print("--ks must contain positive integers", file=sys.stderr)
+            return 2
+        try:
+            candidate_dir = _resolve_experiment(args.candidate_experiment, logs)
+            baseline_dir = _resolve_experiment(args.baseline_experiment, logs)
+        except (FileNotFoundError, ValueError) as exc:
+            print(str(exc), file=sys.stderr)
+            return 1
+        try:
+            report = build_aligned_report(
+                candidate_dir,
+                baseline_dir,
+                candidate_treatment=args.candidate_treatment,
+                baseline_treatment=args.baseline_treatment,
+                tasks_dir=EVAL_ROOT / "local" / "tasks",
+                ks=ks,
+            )
+        except ValueError as exc:
+            print(str(exc), file=sys.stderr)
+            return 1
+        html_report = report
+        if args.language == "zh":
+            report = localize_eval_markdown(report)
+        out_path = Path(args.out) if args.out else candidate_dir / "aligned_comparison_report.md"
+        outputs = write_report_outputs(
+            report,
+            out_path,
+            load_report_output_config(args.report_config),
+            title=(
+                "Comet 对齐实验对比报告"
+                if args.language == "zh"
+                else "Comet Aligned Experiment Comparison Report"
+            ),
+            html_markdown=html_report,
+        )
+        print(report)
+        if outputs:
+            print("\nWrote: " + ", ".join(str(path) for path in outputs.values()))
+        else:
+            print("\nReport outputs disabled by report config")
+        return 0
+
+    if args.experiment:
+        experiment_dir = logs / "experiments" / args.experiment
+        if not experiment_dir.exists():
+            print(f"Experiment not found: {experiment_dir}", file=sys.stderr)
+            return 1
+    else:
+        experiment_dir = _latest_experiment(logs)
+        if experiment_dir is None:
+            print("No experiments found under logs/experiments/", file=sys.stderr)
+            return 1
+
+    report = build_report(experiment_dir)
+    out_path = Path(args.out) if args.out else experiment_dir / "comparison_report.md"
+    outputs = write_report_outputs(
+        report,
+        out_path,
+        load_report_output_config(args.report_config),
+        title="Comet Baseline Comparison Report",
+    )
+    print(report)
+    if outputs:
+        print("\nWrote: " + ", ".join(str(path) for path in outputs.values()))
+    else:
+        print("\nReport outputs disabled by report config")
+    return 0
+
+
+if __name__ == "__main__":
+    raise SystemExit(main())