@rocicorp/zero 0.25.0-canary.7 → 0.25.0-canary.9

package/out/zero-cache/src/db/transaction-pool.js

@@ -1,529 +1,403 @@
-import { resolver } from '@rocicorp/resolver';
+import { resolver } from "@rocicorp/resolver";
 import { assert } from "../../../shared/src/asserts.js";
 import { stringify } from "../../../shared/src/bigint-json.js";
 import { Queue } from "../../../shared/src/queue.js";
 import { promiseVoid } from "../../../shared/src/resolved-promises.js";
-import { disableStatementTimeout, } from "../types/pg.js";
-import * as Mode from "./mode-enum.js";
-/**
- * A TransactionPool is a pool of one or more {@link postgres.TransactionSql}
- * objects that participate in processing a dynamic queue of tasks.
- *
- * This can be used for serializing a set of tasks that arrive asynchronously
- * to a single transaction (for writing) or performing parallel reads across
- * multiple connections at the same snapshot (e.g. read only snapshot transactions).
- */
-export class TransactionPool {
-    #lc;
-    #mode;
-    #init;
-    #cleanup;
-    #tasks = new Queue();
-    #workers = [];
-    #initialWorkers;
-    #maxWorkers;
-    #timeoutTask;
-    #numWorkers;
-    #numWorking = 0;
-    #db; // set when running. stored to allow adaptive pool sizing.
-    #refCount = 1;
-    #done = false;
-    #failure;
-    /**
-     * @param init A {@link Task} that is run in each Transaction before it begins
-     *             processing general tasks. This can be used to to set the transaction
-     *             mode, export/set snapshots, etc. This will be run even if
-     *             {@link fail} has been called on the pool.
-     * @param cleanup A {@link Task} that is run in each Transaction before it closes.
-     *                This will be run even if {@link fail} has been called, or if a
-     *                preceding Task threw an Error.
-     * @param initialWorkers The initial number of transaction workers to process tasks.
-     *                       This is the steady state number of workers that will be kept
-     *                       alive if the TransactionPool is long lived.
-     *                       This must be greater than 0. Defaults to 1.
-     * @param maxWorkers When specified, allows the pool to grow to `maxWorkers`. This
-     *                   must be greater than or equal to `initialWorkers`. On-demand
-     *                   workers will be shut down after an idle timeout of 5 seconds.
-     */
-    constructor(lc, mode, init, cleanup, initialWorkers = 1, maxWorkers = initialWorkers, timeoutTasks = TIMEOUT_TASKS) {
-        assert(initialWorkers > 0);
-        assert(maxWorkers >= initialWorkers);
-        this.#lc = lc;
-        this.#mode = mode;
-        this.#init = init ? this.#stmtRunner(init) : undefined;
-        this.#cleanup = cleanup ? this.#stmtRunner(cleanup) : undefined;
-        this.#initialWorkers = initialWorkers;
-        this.#numWorkers = initialWorkers;
-        this.#maxWorkers = maxWorkers;
-        this.#timeoutTask = timeoutTasks;
+import { disableStatementTimeout } from "../types/pg.js";
+class TransactionPool {
+  #lc;
+  #mode;
+  #init;
+  #cleanup;
+  #tasks = new Queue();
+  #workers = [];
+  #initialWorkers;
+  #maxWorkers;
+  #timeoutTask;
+  #numWorkers;
+  #numWorking = 0;
+  #db;
+  // set when running. stored to allow adaptive pool sizing.
+  #refCount = 1;
+  #done = false;
+  #failure;
+  /**
+   * @param init A {@link Task} that is run in each Transaction before it begins
+   *             processing general tasks. This can be used to to set the transaction
+   *             mode, export/set snapshots, etc. This will be run even if
+   *             {@link fail} has been called on the pool.
+   * @param cleanup A {@link Task} that is run in each Transaction before it closes.
+   *                This will be run even if {@link fail} has been called, or if a
+   *                preceding Task threw an Error.
+   * @param initialWorkers The initial number of transaction workers to process tasks.
+   *                       This is the steady state number of workers that will be kept
+   *                       alive if the TransactionPool is long lived.
+   *                       This must be greater than 0. Defaults to 1.
+   * @param maxWorkers When specified, allows the pool to grow to `maxWorkers`. This
+   *                   must be greater than or equal to `initialWorkers`. On-demand
+   *                   workers will be shut down after an idle timeout of 5 seconds.
+   */
+  constructor(lc, mode, init, cleanup, initialWorkers = 1, maxWorkers = initialWorkers, timeoutTasks = TIMEOUT_TASKS) {
+    assert(initialWorkers > 0);
+    assert(maxWorkers >= initialWorkers);
+    this.#lc = lc;
+    this.#mode = mode;
+    this.#init = init ? this.#stmtRunner(init) : void 0;
+    this.#cleanup = cleanup ? this.#stmtRunner(cleanup) : void 0;
+    this.#initialWorkers = initialWorkers;
+    this.#numWorkers = initialWorkers;
+    this.#maxWorkers = maxWorkers;
+    this.#timeoutTask = timeoutTasks;
+  }
+  /**
+   * Starts the pool of workers to process Tasks with transactions opened from the
+   * specified {@link db}.
+   */
+  run(db) {
+    assert(!this.#db, "already running");
+    this.#db = db;
+    for (let i = 0; i < this.#numWorkers; i++) {
+      this.#addWorker(db);
     }
-    /**
-     * Starts the pool of workers to process Tasks with transactions opened from the
-     * specified {@link db}.
-     */
-    run(db) {
-        assert(!this.#db, 'already running');
-        this.#db = db;
-        for (let i = 0; i < this.#numWorkers; i++) {
-            this.#addWorker(db);
-        }
-        return this;
+    return this;
+  }
+  /**
+   * Adds context parameters to internal LogContext. This is useful for context values that
+   * are not known when the TransactionPool is constructed (e.g. determined after a database
+   * call when the pool is running).
+   *
+   * Returns an object that can be used to add more parameters.
+   */
+  addLoggingContext(key, value) {
+    this.#lc = this.#lc.withContext(key, value);
+    return {
+      addLoggingContext: (key2, value2) => this.addLoggingContext(key2, value2)
+    };
+  }
+  /**
+   * Returns a promise that:
+   *
+   * * resolves after {@link setDone} has been called (or the the pool as been {@link unref}ed
+   *   to a 0 ref count), once all added tasks have been processed and all transactions have been
+   *   committed or closed.
+   *
+   * * rejects if processing was aborted with {@link fail} or if processing any of
+   *   the tasks resulted in an error. All uncommitted transactions will have been
+   *   rolled back.
+   *
+   * Note that partial failures are possible if processing writes with multiple workers
+   * (e.g. `setDone` is called, allowing some workers to commit, after which other
+   *  workers encounter errors). Using a TransactionPool in this manner does not make
+   * sense in terms of transactional semantics, and is thus not recommended.
+   *
+   * For reads, however, multiple workers is useful for performing parallel reads
+   * at the same snapshot. See {@link synchronizedSnapshots} for an example.
+   * Resolves or rejects when all workers are done or failed.
+   */
+  async done() {
+    const numWorkers = this.#workers.length;
+    await Promise.all(this.#workers);
+    if (numWorkers < this.#workers.length) {
+      await Promise.all(this.#workers);
     }
-    /**
-     * Adds context parameters to internal LogContext. This is useful for context values that
-     * are not known when the TransactionPool is constructed (e.g. determined after a database
-     * call when the pool is running).
-     *
-     * Returns an object that can be used to add more parameters.
-     */
-    addLoggingContext(key, value) {
-        this.#lc = this.#lc.withContext(key, value);
-        return {
-            addLoggingContext: (key, value) => this.addLoggingContext(key, value),
+    this.#lc.debug?.("transaction pool done");
+  }
+  #addWorker(db) {
+    const id = this.#workers.length + 1;
+    const lc = this.#lc.withContext("tx", id);
+    const tt = this.#workers.length < this.#initialWorkers ? this.#timeoutTask.forInitialWorkers : this.#timeoutTask.forExtraWorkers;
+    const { timeoutMs } = tt;
+    const timeoutTask = tt.task === "done" ? "done" : this.#stmtRunner(tt.task);
+    const worker = async (tx) => {
+      try {
+        lc.debug?.("started transaction");
+        disableStatementTimeout(tx);
+        let last = promiseVoid;
+        const executeTask = async (runner) => {
+          runner !== this.#init && this.#numWorking++;
+          const { pending } = await runner.run(tx, lc, () => {
+            runner !== this.#init && this.#numWorking--;
+          });
+          last = pending ?? last;
         };
-    }
-    /**
-     * Returns a promise that:
-     *
-     * * resolves after {@link setDone} has been called (or the the pool as been {@link unref}ed
-     *   to a 0 ref count), once all added tasks have been processed and all transactions have been
-     *   committed or closed.
-     *
-     * * rejects if processing was aborted with {@link fail} or if processing any of
-     *   the tasks resulted in an error. All uncommitted transactions will have been
-     *   rolled back.
-     *
-     * Note that partial failures are possible if processing writes with multiple workers
-     * (e.g. `setDone` is called, allowing some workers to commit, after which other
-     *  workers encounter errors). Using a TransactionPool in this manner does not make
-     * sense in terms of transactional semantics, and is thus not recommended.
-     *
-     * For reads, however, multiple workers is useful for performing parallel reads
-     * at the same snapshot. See {@link synchronizedSnapshots} for an example.
-     * Resolves or rejects when all workers are done or failed.
-     */
-    async done() {
-        const numWorkers = this.#workers.length;
-        await Promise.all(this.#workers);
-        if (numWorkers < this.#workers.length) {
-            // If workers were added after the initial set, they must be awaited to ensure
-            // that the results (i.e. rejections) of all workers are accounted for. This only
-            // needs to be re-done once, because the fact that the first `await` completed
-            // guarantees that the pool is in a terminal state and no new workers can be added.
-            await Promise.all(this.#workers);
-        }
-        this.#lc.debug?.('transaction pool done');
-    }
-    #addWorker(db) {
-        const id = this.#workers.length + 1;
-        const lc = this.#lc.withContext('tx', id);
-        const tt = this.#workers.length < this.#initialWorkers
-            ? this.#timeoutTask.forInitialWorkers
-            : this.#timeoutTask.forExtraWorkers;
-        const { timeoutMs } = tt;
-        const timeoutTask = tt.task === 'done' ? 'done' : this.#stmtRunner(tt.task);
-        const worker = async (tx) => {
-            try {
-                lc.debug?.('started transaction');
-                disableStatementTimeout(tx);
-                let last = promiseVoid;
-                const executeTask = async (runner) => {
-                    runner !== this.#init && this.#numWorking++;
-                    const { pending } = await runner.run(tx, lc, () => {
-                        runner !== this.#init && this.#numWorking--;
-                    });
-                    last = pending ?? last;
-                };
-                let task = this.#init ?? (await this.#tasks.dequeue(timeoutTask, timeoutMs));
-                try {
-                    while (task !== 'done') {
-                        if (task instanceof Error ||
-                            (task !== this.#init && this.#failure)) {
-                            throw this.#failure ?? task;
-                        }
-                        await executeTask(task);
-                        // await the next task.
-                        task = await this.#tasks.dequeue(timeoutTask, timeoutMs);
-                    }
-                }
-                finally {
-                    // Execute the cleanup task even on failure.
-                    if (this.#cleanup) {
-                        await executeTask(this.#cleanup);
-                    }
-                }
-                lc.debug?.('closing transaction');
-                // Given the semantics of a Postgres transaction, the last statement
-                // will only succeed if all of the preceding statements succeeded.
-                return last;
+        let task = this.#init ?? await this.#tasks.dequeue(timeoutTask, timeoutMs);
+        try {
+          while (task !== "done") {
+            if (task instanceof Error || task !== this.#init && this.#failure) {
+              throw this.#failure ?? task;
             }
-            catch (e) {
-                if (e !== this.#failure) {
-                    lc.error?.('error from worker', e);
-                    this.fail(e); // A failure in any worker should fail the pool.
-                }
-                throw e;
-            }
-        };
-        this.#workers.push(db
-            .begin(this.#mode, worker)
-            .catch(e => {
-            if (e instanceof RollbackSignal) {
-                // A RollbackSignal is used to gracefully rollback the postgres.js
-                // transaction block. It should not be thrown up to the application.
-                lc.debug?.('aborted transaction');
-            }
-            else {
-                throw e;
-            }
-        })
-            .finally(() => this.#numWorkers--));
-        // After adding the worker, enqueue a terminal signal if we are in either of the
-        // terminal states (both of which prevent more tasks from being enqueued), to ensure
-        // that the added worker eventually exits.
-        if (this.#done) {
-            this.#tasks.enqueue('done');
+            await executeTask(task);
+            task = await this.#tasks.dequeue(timeoutTask, timeoutMs);
+          }
+        } finally {
+          if (this.#cleanup) {
+            await executeTask(this.#cleanup);
+          }
         }
-        if (this.#failure) {
-            this.#tasks.enqueue(this.#failure);
+        lc.debug?.("closing transaction");
+        return last;
+      } catch (e) {
+        if (e !== this.#failure) {
+          lc.error?.("error from worker", e);
+          this.fail(e);
         }
+        throw e;
+      }
+    };
+    this.#workers.push(
+      db.begin(this.#mode, worker).catch((e) => {
+        if (e instanceof RollbackSignal) {
+          lc.debug?.("aborted transaction");
+        } else {
+          throw e;
+        }
+      }).finally(() => this.#numWorkers--)
+    );
+    if (this.#done) {
+      this.#tasks.enqueue("done");
     }
-    /**
-     * Processes the statements produced by the specified {@link Task},
-     * returning a Promise that resolves when the statements are either processed
-     * by the database or rejected.
-     *
-     * Note that statement failures will result in failing the entire
-     * TransactionPool (per transaction semantics). However, the returned Promise
-     * itself will resolve rather than reject. As such, it is fine to ignore
-     * returned Promises in order to pipeline requests to the database. It is
-     * recommended to occasionally await them (e.g. after some threshold) in
-     * order to avoid memory blowup in the case of database slowness.
-     */
-    process(task) {
-        const r = resolver();
-        this.#process(this.#stmtRunner(task, r));
-        return r.promise;
-    }
-    #start = performance.now();
-    #stmts = 0;
-    /**
-     * Implements the semantics specified in {@link process()}.
-     *
-     * Specifically:
-     * * `freeWorker()` is called as soon as the statements are produced,
-     *   allowing them to be pipelined to the database.
-     * * Statement errors result in failing the transaction pool.
-     * * The client-supplied Resolver resolves on success or failure;
-     *   it is never rejected.
-     */
-    #stmtRunner(task, r = resolver()) {
-        return {
-            run: async (tx, lc, freeWorker) => {
-                let stmts;
-                try {
-                    stmts = await task(tx, lc);
-                }
-                catch (e) {
-                    r.resolve();
-                    throw e;
-                }
-                finally {
-                    freeWorker();
-                }
-                if (stmts.length === 0) {
-                    r.resolve();
-                    return { pending: null };
-                }
-                // Execute the statements (i.e. send to the db) immediately.
-                // The last result is returned for the worker to await before
-                // closing the transaction.
-                const last = stmts.reduce((_, stmt) => stmt
-                    .execute()
-                    .then(() => {
-                    if (++this.#stmts % 1000 === 0) {
-                        const q = stmt;
-                        lc.debug?.(`executed ${this.#stmts}th statement (${(performance.now() - this.#start).toFixed(3)} ms)`, {
-                            statement: q.string,
-                            params: stringify(q.parameters),
-                        });
-                    }
-                })
-                    .catch(e => this.fail(e)), promiseVoid);
-                return { pending: last.then(r.resolve) };
-            },
-            rejected: r.resolve,
-        };
-    }
-    /**
-     * Processes and returns the result of executing the {@link ReadTask} from
-     * within the transaction. An error thrown by the task will result in
-     * rejecting the returned Promise, but will not affect the transaction pool
-     * itself.
-     */
-    processReadTask(readTask) {
-        const r = resolver();
-        this.#process(this.#readRunner(readTask, r));
-        return r.promise;
-    }
-    /**
-     * Implements the semantics specified in {@link processReadTask()}.
-     *
-     * Specifically:
-     * * `freeWorker()` is called as soon as the result is produced,
-     *   before resolving the client-supplied Resolver.
-     * * Errors result in rejecting the client-supplied Resolver but
-     *   do not affect transaction pool.
-     */
-    #readRunner(readTask, r) {
-        return {
-            run: async (tx, lc, freeWorker) => {
-                let result;
-                try {
-                    result = await readTask(tx, lc);
-                    freeWorker();
-                    r.resolve(result);
-                }
-                catch (e) {
-                    freeWorker();
-                    r.reject(e);
-                }
-                return { pending: null };
-            },
-            rejected: r.reject,
-        };
+    if (this.#failure) {
+      this.#tasks.enqueue(this.#failure);
     }
-    #process(runner) {
-        assert(!this.#done, 'already set done');
-        if (this.#failure) {
-            runner.rejected(this.#failure);
-            return;
+  }
+  /**
+   * Processes the statements produced by the specified {@link Task},
+   * returning a Promise that resolves when the statements are either processed
+   * by the database or rejected.
+   *
+   * Note that statement failures will result in failing the entire
+   * TransactionPool (per transaction semantics). However, the returned Promise
+   * itself will resolve rather than reject. As such, it is fine to ignore
+   * returned Promises in order to pipeline requests to the database. It is
+   * recommended to occasionally await them (e.g. after some threshold) in
+   * order to avoid memory blowup in the case of database slowness.
+   */
+  process(task) {
+    const r = resolver();
+    this.#process(this.#stmtRunner(task, r));
+    return r.promise;
+  }
+  #start = performance.now();
+  #stmts = 0;
+  /**
+   * Implements the semantics specified in {@link process()}.
+   *
+   * Specifically:
+   * * `freeWorker()` is called as soon as the statements are produced,
+   *   allowing them to be pipelined to the database.
+   * * Statement errors result in failing the transaction pool.
+   * * The client-supplied Resolver resolves on success or failure;
+   *   it is never rejected.
+   */
+  #stmtRunner(task, r = resolver()) {
+    return {
+      run: async (tx, lc, freeWorker) => {
+        let stmts;
+        try {
+          stmts = await task(tx, lc);
+        } catch (e) {
+          r.resolve();
+          throw e;
+        } finally {
+          freeWorker();
         }
-        this.#tasks.enqueue(runner);
-        // Check if the pool size can and should be increased.
-        if (this.#numWorkers < this.#maxWorkers) {
-            const outstanding = this.#tasks.size();
-            if (outstanding > this.#numWorkers - this.#numWorking) {
-                this.#db && this.#addWorker(this.#db);
-                this.#numWorkers++;
-                this.#lc.debug?.(`Increased pool size to ${this.#numWorkers}`);
-            }
+        if (stmts.length === 0) {
+          r.resolve();
+          return { pending: null };
         }
-    }
-    /**
-     * Ends all workers with a ROLLBACK. Throws if the pool is already done
-     * or aborted.
-     */
-    abort() {
-        this.fail(new RollbackSignal());
-    }
-    /**
-     * Signals to all workers to end their transaction once all pending tasks have
-     * been completed. Throws if the pool is already done or aborted.
-     */
-    setDone() {
-        assert(!this.#done, 'already set done');
-        this.#done = true;
-        for (let i = 0; i < this.#numWorkers; i++) {
-            this.#tasks.enqueue('done');
+        const last = stmts.reduce(
+          (_, stmt) => stmt.execute().then(() => {
+            if (++this.#stmts % 1e3 === 0) {
+              const q = stmt;
+              lc.debug?.(
+                `executed ${this.#stmts}th statement (${(performance.now() - this.#start).toFixed(3)} ms)`,
+                {
+                  statement: q.string,
+                  params: stringify(q.parameters)
+                }
+              );
+            }
+          }).catch((e) => this.fail(e)),
+          promiseVoid
+        );
+        return { pending: last.then(r.resolve) };
+      },
+      rejected: r.resolve
+    };
+  }
+  /**
+   * Processes and returns the result of executing the {@link ReadTask} from
+   * within the transaction. An error thrown by the task will result in
+   * rejecting the returned Promise, but will not affect the transaction pool
+   * itself.
+   */
+  processReadTask(readTask) {
+    const r = resolver();
+    this.#process(this.#readRunner(readTask, r));
+    return r.promise;
+  }
+  /**
+   * Implements the semantics specified in {@link processReadTask()}.
+   *
+   * Specifically:
+   * * `freeWorker()` is called as soon as the result is produced,
+   *   before resolving the client-supplied Resolver.
+   * * Errors result in rejecting the client-supplied Resolver but
+   *   do not affect transaction pool.
+   */
+  #readRunner(readTask, r) {
+    return {
+      run: async (tx, lc, freeWorker) => {
+        let result;
+        try {
+          result = await readTask(tx, lc);
+          freeWorker();
+          r.resolve(result);
+        } catch (e) {
+          freeWorker();
+          r.reject(e);
         }
+        return { pending: null };
+      },
+      rejected: r.reject
+    };
+  }
+  #process(runner) {
+    assert(!this.#done, "already set done");
+    if (this.#failure) {
+      runner.rejected(this.#failure);
+      return;
     }
-    /**
-     * An alternative to explicitly calling {@link setDone}, `ref()` increments an internal reference
-     * count, and {@link unref} decrements it. When the reference count reaches 0, {@link setDone} is
-     * automatically called. A TransactionPool is initialized with a reference count of 1.
-     *
-     * `ref()` should be called before sharing the pool with another component, and only after the
-     * pool has been started with {@link run()}. It must not be called on a TransactionPool that is
-     * already done (either via {@link unref()} or {@link setDone()}. (Doing so indicates a logical
-     * error in the code.)
-     *
-     * It follows that:
-     * * The creator of the TransactionPool is responsible for running it.
-     * * The TransactionPool should be ref'ed before being sharing.
-     * * The receiver of the TransactionPool is only responsible for unref'ing it.
-     *
-     * On the other hand, a transaction pool that fails with a runtime error can still be ref'ed;
-     * attempts to use the pool will result in the runtime error as expected.
-     */
-    // TODO: Get rid of the ref-counting stuff. It's no longer needed.
-    ref(count = 1) {
-        assert(this.#db !== undefined && !this.#done, `Cannot ref() a TransactionPool that is not running`);
-        this.#refCount += count;
+    this.#tasks.enqueue(runner);
+    if (this.#numWorkers < this.#maxWorkers) {
+      const outstanding = this.#tasks.size();
+      if (outstanding > this.#numWorkers - this.#numWorking) {
+        this.#db && this.#addWorker(this.#db);
+        this.#numWorkers++;
+        this.#lc.debug?.(`Increased pool size to ${this.#numWorkers}`);
+      }
     }
-    /**
-     * Decrements the internal reference count, automatically invoking {@link setDone} when it reaches 0.
-     */
-    unref(count = 1) {
-        assert(count <= this.#refCount);
-        this.#refCount -= count;
-        if (this.#refCount === 0) {
-            this.setDone();
-        }
+  }
+  /**
+   * Ends all workers with a ROLLBACK. Throws if the pool is already done
+   * or aborted.
+   */
+  abort() {
+    this.fail(new RollbackSignal());
+  }
+  /**
+   * Signals to all workers to end their transaction once all pending tasks have
+   * been completed. Throws if the pool is already done or aborted.
+   */
+  setDone() {
+    assert(!this.#done, "already set done");
+    this.#done = true;
+    for (let i = 0; i < this.#numWorkers; i++) {
+      this.#tasks.enqueue("done");
     }
-    isRunning() {
-        return this.#db !== undefined && !this.#done && this.#failure === undefined;
+  }
+  /**
+   * An alternative to explicitly calling {@link setDone}, `ref()` increments an internal reference
+   * count, and {@link unref} decrements it. When the reference count reaches 0, {@link setDone} is
+   * automatically called. A TransactionPool is initialized with a reference count of 1.
+   *
+   * `ref()` should be called before sharing the pool with another component, and only after the
+   * pool has been started with {@link run()}. It must not be called on a TransactionPool that is
+   * already done (either via {@link unref()} or {@link setDone()}. (Doing so indicates a logical
+   * error in the code.)
+   *
+   * It follows that:
+   * * The creator of the TransactionPool is responsible for running it.
+   * * The TransactionPool should be ref'ed before being sharing.
+   * * The receiver of the TransactionPool is only responsible for unref'ing it.
+   *
+   * On the other hand, a transaction pool that fails with a runtime error can still be ref'ed;
+   * attempts to use the pool will result in the runtime error as expected.
+   */
+  // TODO: Get rid of the ref-counting stuff. It's no longer needed.
+  ref(count = 1) {
+    assert(
+      this.#db !== void 0 && !this.#done,
+      `Cannot ref() a TransactionPool that is not running`
+    );
+    this.#refCount += count;
+  }
+  /**
+   * Decrements the internal reference count, automatically invoking {@link setDone} when it reaches 0.
+   */
+  unref(count = 1) {
+    assert(count <= this.#refCount);
+    this.#refCount -= count;
+    if (this.#refCount === 0) {
+      this.setDone();
     }
-    /**
-     * Signals all workers to fail their transactions with the given {@link err}.
-     */
-    fail(err) {
-        if (!this.#failure) {
-            this.#failure = ensureError(err); // Fail fast: this is checked in the worker loop.
-            if (this.#failure instanceof ControlFlowError) {
-                this.#lc.debug?.(this.#failure);
-            }
-            else {
-                this.#lc.error?.(this.#failure);
-            }
-            for (let i = 0; i < this.#numWorkers; i++) {
-                // Enqueue the Error to terminate any workers waiting for tasks.
-                this.#tasks.enqueue(this.#failure);
-            }
-        }
+  }
+  isRunning() {
+    return this.#db !== void 0 && !this.#done && this.#failure === void 0;
+  }
+  /**
+   * Signals all workers to fail their transactions with the given {@link err}.
+   */
+  fail(err) {
+    if (!this.#failure) {
+      this.#failure = ensureError(err);
+      if (this.#failure instanceof ControlFlowError) {
+        this.#lc.debug?.(this.#failure);
+      } else {
+        this.#lc.error?.(this.#failure);
+      }
+      for (let i = 0; i < this.#numWorkers; i++) {
+        this.#tasks.enqueue(this.#failure);
+      }
     }
+  }
 }
-/**
- * Init Tasks for Postgres snapshot synchronization across transactions.
- *
- * https://www.postgresql.org/docs/9.3/functions-admin.html#:~:text=Snapshot%20Synchronization%20Functions,identical%20content%20in%20the%20database.
- */
-export function synchronizedSnapshots() {
-    const { promise: snapshotExported, resolve: exportSnapshot, reject: failExport, } = resolver();
-    const { promise: snapshotCaptured, resolve: captureSnapshot, reject: failCapture, } = resolver();
-    // Set by the first worker to run its initTask, who becomes responsible for
-    // exporting the snapshot. TODO: Plumb the workerNum and use that instead.
-    let firstWorkerRun = false;
-    // Note: Neither init task should `await`, as processing in each pool can proceed
-    //       as soon as the statements have been sent to the db. However, the `cleanupExport`
-    //       task must `await` the result of `setSnapshot` to ensure that exporting transaction
-    //       does not close before the snapshot has been captured.
-    return {
-        exportSnapshot: tx => {
-            if (!firstWorkerRun) {
-                firstWorkerRun = true;
-                const stmt = tx `SELECT pg_export_snapshot() AS snapshot; SET TRANSACTION READ ONLY;`.simple();
-                // Intercept the promise to propagate the information to `snapshotExported`.
-                stmt.then(result => exportSnapshot(result[0].snapshot), failExport);
-                return [stmt]; // Also return the stmt so that it gets awaited (and errors handled).
-            }
-            return snapshotExported.then(snapshotID => [
-                tx.unsafe(`SET TRANSACTION SNAPSHOT '${snapshotID}'`),
-                tx `SET TRANSACTION READ ONLY`.simple(),
-            ]);
-        },
-        setSnapshot: tx => snapshotExported.then(snapshotID => {
-            const stmt = tx.unsafe(`SET TRANSACTION SNAPSHOT '${snapshotID}'`);
-            // Intercept the promise to propagate the information to `cleanupExport`.
-            stmt.then(captureSnapshot, failCapture);
-            return [stmt];
-        }),
-        cleanupExport: async () => {
-            await snapshotCaptured;
-            return [];
-        },
-        snapshotID: snapshotExported,
-    };
-}
-/**
- * Returns `init` and `cleanup` {@link Task}s for a TransactionPool that ensure its workers
- * share a single view of the database. This is used for View Notifier and View Syncer logic
- * that allows multiple entities to perform parallel reads on the same snapshot of the database.
- */
-export function sharedSnapshot() {
-    const { promise: snapshotExported, resolve: exportSnapshot, reject: failExport, } = resolver();
-    // Set by the first worker to run its initTask, who becomes responsible for
-    // exporting the snapshot.
-    let firstWorkerRun = false;
-    // Set when any worker is done, signalling that all non-sentinel Tasks have been
-    // dequeued, and thus any subsequently spawned workers should skip their initTask
-    // since the snapshot is no longer needed (and soon to become invalid).
-    let firstWorkerDone = false;
-    return {
-        init: (tx, lc) => {
-            if (!firstWorkerRun) {
-                firstWorkerRun = true;
-                const stmt = tx `SELECT pg_export_snapshot() AS snapshot;`.simple();
-                // Intercept the promise to propagate the information to `snapshotExported`.
-                stmt.then(result => exportSnapshot(result[0].snapshot), failExport);
-                return [stmt]; // Also return the stmt so that it gets awaited (and errors handled).
-            }
-            if (!firstWorkerDone) {
-                return snapshotExported.then(snapshotID => [
-                    tx.unsafe(`SET TRANSACTION SNAPSHOT '${snapshotID}'`),
-                ]);
-            }
-            lc.debug?.('All work is done. No need to set snapshot');
-            return [];
-        },
-        cleanup: () => {
-            firstWorkerDone = true;
-            return [];
-        },
-        snapshotID: snapshotExported,
-    };
-}
-/**
- * @returns An `init` Task for importing a snapshot from another transaction.
- */
-export function importSnapshot(snapshotID) {
-    const { promise: imported, resolve, reject } = resolver();
-    return {
-        init: tx => {
-            const stmt = tx.unsafe(`SET TRANSACTION SNAPSHOT '${snapshotID}'`);
-            stmt.then(() => resolve(), reject);
-            return [stmt];
-        },
-        imported,
-    };
+function importSnapshot(snapshotID) {
+  const { promise: imported, resolve, reject } = resolver();
+  return {
+    init: (tx) => {
+      const stmt = tx.unsafe(`SET TRANSACTION SNAPSHOT '${snapshotID}'`);
+      stmt.then(() => resolve(), reject);
+      return [stmt];
+    },
+    imported
+  };
 }
-/**
- * A superclass of Errors used for control flow that is needed to handle
- * another Error but does not constitute an error condition itself (e.g.
- * aborting transactions after a previous one fails). Subclassing this Error
- * will result in lowering the log level from `error` to `debug`.
- */
-export class ControlFlowError extends Error {
-    constructor(cause) {
-        super();
-        this.cause = cause;
-    }
+class ControlFlowError extends Error {
+  constructor(cause) {
+    super();
+    this.cause = cause;
+  }
 }
-/**
- * Internal error used to rollback the worker transaction. This is used
- * instead of executing a `ROLLBACK` statement because the postgres.js
- * library will otherwise try to execute an extraneous `COMMIT`, which
- * results in outputting a "no transaction in progress" warning to the
- * database logs.
- *
- * Throwing an exception, on the other hand, executes the postgres.js
- * codepath that calls `ROLLBACK` instead.
- */
 class RollbackSignal extends ControlFlowError {
-    name = 'RollbackSignal';
-    message = 'rolling back transaction';
+  name = "RollbackSignal";
+  message = "rolling back transaction";
 }
 function ensureError(err) {
-    if (err instanceof Error) {
-        return err;
-    }
-    const error = new Error();
-    error.cause = err;
-    return error;
+  if (err instanceof Error) {
+    return err;
+  }
+  const error = new Error();
+  error.cause = err;
+  return error;
 }
-// TODO: Get rid of the timeout stuff. It's no longer needed.
-const IDLE_TIMEOUT_MS = 5_000;
-const KEEPALIVE_TIMEOUT_MS = 60_000;
-const KEEPALIVE_TASK = tx => [tx `SELECT 1`.simple()];
-// Production timeout tasks. Overridden in tests.
-export const TIMEOUT_TASKS = {
-    forInitialWorkers: {
-        timeoutMs: KEEPALIVE_TIMEOUT_MS,
-        task: KEEPALIVE_TASK,
-    },
-    forExtraWorkers: {
-        timeoutMs: IDLE_TIMEOUT_MS,
-        task: 'done',
-    },
+const IDLE_TIMEOUT_MS = 5e3;
+const KEEPALIVE_TIMEOUT_MS = 6e4;
+const KEEPALIVE_TASK = (tx) => [tx`SELECT 1`.simple()];
+const TIMEOUT_TASKS = {
+  forInitialWorkers: {
+    timeoutMs: KEEPALIVE_TIMEOUT_MS,
+    task: KEEPALIVE_TASK
+  },
+  forExtraWorkers: {
+    timeoutMs: IDLE_TIMEOUT_MS,
+    task: "done"
+  }
+};
+export {
+  ControlFlowError,
+  TIMEOUT_TASKS,
+  TransactionPool,
+  importSnapshot
 };
-//# sourceMappingURL=transaction-pool.js.map
+//# sourceMappingURL=transaction-pool.js.map