@robotical/webapp-types 3.25.3 → 3.25.4
This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
package/dist-types/package.json
CHANGED
package/dist-types/src/components/oneoffs/calibration-screens/ColourSensorCalibration/messages.d.ts
CHANGED
|
@@ -8,7 +8,7 @@ declare const english: {
|
|
|
8
8
|
readonly air: "Lift Marty about 30 cm above the surface with both feet clear. Hold it steady and capture the air readings.";
|
|
9
9
|
readonly white: "Place the foot with the selected colour sensor flat on a matt white surface, with the sensor fully over it. Hold Marty steady and capture the white readings.";
|
|
10
10
|
readonly purple: "If you have a purple colour card, place the foot with the selected sensor flat on it and capture the readings. This helps the sensor tell a dark card from air. This step is optional: choose Skip and save calibration to finish using your air and white readings and keep the current ground threshold.";
|
|
11
|
-
readonly duration: "Each capture takes about
|
|
11
|
+
readonly duration: "Each capture takes about 3–4 seconds once sampling starts. Preparing or restoring sensor settings can take a few extra seconds.";
|
|
12
12
|
readonly preparing: "Preparing the sensor…";
|
|
13
13
|
readonly warmingUp: "Waking the colour sensor…";
|
|
14
14
|
readonly sensorPowerFailed: "The colour sensor did not wake up. Check its connection, reconnect Marty and try again.";
|
package/dist-types/src/components/oneoffs/calibration-screens/ColourSensorCalibration/messages.js
CHANGED
|
@@ -8,7 +8,7 @@ var english = {
|
|
|
8
8
|
air: "Lift Marty about 30 cm above the surface with both feet clear. Hold it steady and capture the air readings.",
|
|
9
9
|
white: "Place the foot with the selected colour sensor flat on a matt white surface, with the sensor fully over it. Hold Marty steady and capture the white readings.",
|
|
10
10
|
purple: "If you have a purple colour card, place the foot with the selected sensor flat on it and capture the readings. This helps the sensor tell a dark card from air. This step is optional: choose Skip and save calibration to finish using your air and white readings and keep the current ground threshold.",
|
|
11
|
-
duration: "Each capture takes about
|
|
11
|
+
duration: "Each capture takes about 3–4 seconds once sampling starts. Preparing or restoring sensor settings can take a few extra seconds.",
|
|
12
12
|
preparing: "Preparing the sensor…",
|
|
13
13
|
warmingUp: "Waking the colour sensor…",
|
|
14
14
|
sensorPowerFailed: "The colour sensor did not wake up. Check its connection, reconnect Marty and try again.",
|