@robotical/webapp-types 3.14.48 → 3.15.1

package/dist-types/src/i18n.js

@@ -141,6 +141,14 @@ var resources = {
                 "reject": "NO, I DON'T ACCEPT"
             },
             "calibration_screen": {
+                "colour_calibration": {
+                    "unplugged_modal_title": "Unplugged",
+                    "air_countdown": "Hold Marty in the air. Sampling in {{seconds}}...",
+                    "resetting_offsets": "Resetting colour sensor offsets...",
+                    "usb_required": "Please connect Marty via USB to calibrate the colour sensor.",
+                    "warming_up": "Warming up colour sensor... {{seconds}}...",
+                    "white_countdown": "Hold Marty on white. Sampling in {{seconds}}...,"
+                },
                 "arm_calibration": "ARM CALIBRATION",
                 "arms01_hint": "Press the button once his arms are straight down",
                 "arms01_title": "Move Marty's arms so they are straight down by its sides",
@@ -149,6 +157,15 @@ var resources = {
                 "colour_sensor_hint": "Place Marty on a white surface and start calibration",
                 "colour_sensor_title": "Colour Sensor Calibration",
                 "communicating": "Communicating with your Marty...",
+                "calibrating_air_initial": "Capturing air reading...",
+                "calibrating_air_hold": "Keep holding, it'll be done soon.",
+                "calibrating_white": "Calibrating on white surface...",
+                "finish_calibration": "Finish Calibration",
+                "lift_in_air": "Lift Marty about 30cm into the air, then start calibration.",
+                "lift_in_air_warning": "Robot not in the air. Please lift it up.",
+                "lift_in_air_error": "Please lift Marty into the air and try again.",
+                "place_on_white_finish": "Place Marty on a white surface and finish calibration!",
+                "start_air_calibration": "Start Air Calibration",
                 "default_hint": "Hint",
                 "default_title": "Title",
                 "done_hint": "Press the BACK button to do further calibration or finish up",
@@ -180,7 +197,8 @@ var resources = {
                 "coming_soon": "Coming Soon...",
                 "not_supported": "Cog configuration is not supported on this device.",
                 "update_cog_link": "You can update your Cog <0>here</0>.",
-                "your_cog_version": "Your Cog Version is"
+                "your_cog_version": "Your Cog Version is",
+                "up_to_date": "Cog up to date"
             },
             "configuration_screen": {
                 "addons": "Add-ons",
@@ -197,9 +215,15 @@ var resources = {
                 "manage_expansions": "Manage Marty's expansions",
                 "open": "Open",
                 "update_marty": "Update Your Marty",
-                "wifi": "Wifi"
+                "wifi": "Wifi",
+                "marty_up_to_date": "Marty up to date",
+                "update_marty_link": "You can update your Marty <0>here</0>."
             },
             "connection": {
+                "unplugged_modal_title": "Marty Unplugged",
+                "unplugged_modal_heading": "Couldn't connect to your Marty!",
+                "unplugged_modal_body": "Your Marty is currently in unplugged mode. If you want to dissconect Marty from unplugged mode, please press the \"MODE\"/\"A\" button on the back of Marty and try again!",
+                "unplugged_modal_button": "Got it!",
                 "cancel": "Cancel",
                 "connecting_loading": "This shouldn't take long!",
                 "connecting_msg": "Connecting...",
@@ -376,7 +400,7 @@ var resources = {
                 "ssid_placeholder": "SSID",
                 "step": "STEP 1a."
             }
-        }
+        },
     },
     "el": {
         "translation": {
@@ -509,6 +533,14 @@ var resources = {
                 "reject": "ΟΧΙ, ΔΕΝ ΑΠΟΔΕΧΟΜΑΙ"
             },
             "calibration_screen": {
+                "colour_calibration": {
+                    "unplugged_modal_title": "Unplugged",
+                    "air_countdown": "Hold Marty in the air. Sampling in {{seconds}}...",
+                    "resetting_offsets": "Resetting colour sensor offsets...",
+                    "usb_required": "Please connect Marty via USB to calibrate the colour sensor.",
+                    "warming_up": "Warming up colour sensor... {{seconds}}...",
+                    "white_countdown": "Hold Marty on white. Sampling in {{seconds}}...,"
+                },
                 "arm_calibration": "ΒΑΘΜΟΝΟΜΗΣΗ ΧΕΡΙΩΝ",
                 "arms01_hint": "Πατήστε το κουμπί όταν τα χέρια του είναι ίσια κάτω",
                 "arms01_title": "Τοποθετήστε τα χέρια του Marty ώστε να είναι ίσια κάτω στα πλάγια του",
@@ -517,6 +549,15 @@ var resources = {
                 "colour_sensor_hint": "Τοποθετήστε τον Marty σε μια λευκή επιφάνεια και ξεκινήστε τη βαθμονόμηση",
                 "colour_sensor_title": "ΒΑΘΜΟΝΟΜΗΣΗ ΑΙΣΘΗΤΗΡΑ ΧΡΩΜΑΤΟΣ",
                 "communicating": "Επικοινωνία με τον Marty σας...",
+                "calibrating_air_initial": "Capturing air reading...",
+                "calibrating_air_hold": "Keep holding, it'll be done soon.",
+                "calibrating_white": "Calibrating on white surface...",
+                "finish_calibration": "Finish Calibration",
+                "lift_in_air": "Lift Marty about 30cm into the air, then start calibration.",
+                "lift_in_air_warning": "Robot not in the air. Please lift it up.",
+                "lift_in_air_error": "Please lift Marty into the air and try again.",
+                "place_on_white_finish": "Place Marty on a white surface and finish calibration!",
+                "start_air_calibration": "Start Air Calibration",
                 "default_hint": "Υπόδειξη",
                 "default_title": "Τίτλος",
                 "done_hint": "Πατήστε το κουμπί ΠΙΣΩ για περαιτέρω βαθμονόμηση ή για να ολοκληρώσετε",
@@ -548,7 +589,8 @@ var resources = {
                 "coming_soon": "Έρχεται σύντομα...",
                 "not_supported": "Η διαμόρφωση Cog δεν υποστηρίζεται ακόμη. Επιστρέψτε αργότερα!",
                 "update_cog_link": "Mπορείτε να ενημερώσετε το Cog σας <0>εδώ</0>.",
-                "your_cog_version": "Η έκδοση του Cog σας είναι"
+                "your_cog_version": "Η έκδοση του Cog σας είναι",
+                "up_to_date": "Cog up to date"
             },
             "configuration_screen": {
                 "addons": "ΠΡΟΣΘΕΤΑ",
@@ -565,9 +607,15 @@ var resources = {
                 "manage_expansions": "Διαχείριση επεκτάσεων του Marty",
                 "open": "Άνοιγμα",
                 "update_marty": "ΕΝΗΜΕΡΩΣΤΕ ΤΟΝ MARTY ΣΑΣ",
-                "wifi": "Wifi"
+                "wifi": "Wifi",
+                "marty_up_to_date": "Marty up to date",
+                "update_marty_link": "You can update your Marty <0>here</0>."
             },
             "connection": {
+                "unplugged_modal_title": "Marty Unplugged",
+                "unplugged_modal_heading": "Couldn't connect to your Marty!",
+                "unplugged_modal_body": "Your Marty is currently in unplugged mode. If you want to dissconect Marty from unplugged mode, please press the \"MODE\"/\"A\" button on the back of Marty and try again!",
+                "unplugged_modal_button": "Got it!",
                 "cancel": "Ακύρωση",
                 "connecting_loading": "Αυτό δεν θα πάρει πολύ χρόνο!",
                 "connecting_msg": "Σύνδεση...",
@@ -744,7 +792,7 @@ var resources = {
                 "ssid_placeholder": "SSID",
                 "step": "ΒΗΜΑ 1α."
             }
-        }
+        },
     },
     "nl": {
         "translation": {
@@ -877,6 +925,14 @@ var resources = {
                 "reject": "NEE, IK ACCEPTEER HET NIET"
             },
             "calibration_screen": {
+                "colour_calibration": {
+                    "unplugged_modal_title": "Unplugged",
+                    "air_countdown": "Hold Marty in the air. Sampling in {{seconds}}...",
+                    "resetting_offsets": "Resetting colour sensor offsets...",
+                    "usb_required": "Please connect Marty via USB to calibrate the colour sensor.",
+                    "warming_up": "Warming up colour sensor... {{seconds}}...",
+                    "white_countdown": "Hold Marty on white. Sampling in {{seconds}}...,"
+                },
                 "arm_calibration": "ARM KALIBRATIE",
                 "arms01_hint": "Druk op de knop zodra zijn armen recht naar beneden zijn",
                 "arms01_title": "Beweeg Marty's armen zodat ze recht naar beneden langs de zijkanten zijn",
@@ -885,6 +941,15 @@ var resources = {
                 "colour_sensor_hint": "Plaats Marty op een wit oppervlak en begin met kalibreren",
                 "colour_sensor_title": "Kalibratie van de kleurensensor",
                 "communicating": "Communiceren met je Marty...",
+                "calibrating_air_initial": "Capturing air reading...",
+                "calibrating_air_hold": "Keep holding, it'll be done soon.",
+                "calibrating_white": "Calibrating on white surface...",
+                "finish_calibration": "Finish Calibration",
+                "lift_in_air": "Lift Marty about 30cm into the air, then start calibration.",
+                "lift_in_air_warning": "Robot not in the air. Please lift it up.",
+                "lift_in_air_error": "Please lift Marty into the air and try again.",
+                "place_on_white_finish": "Place Marty on a white surface and finish calibration!",
+                "start_air_calibration": "Start Air Calibration",
                 "default_hint": "Tip",
                 "default_title": "Titel",
                 "done_hint": "Druk op de BACK-knop om verdere kalibratie uit te voeren of af te ronden",
@@ -916,7 +981,8 @@ var resources = {
                 "coming_soon": "Binnenkort beschikbaar...",
                 "not_supported": "Tandwielconfiguratie wordt niet ondersteund op dit apparaat.",
                 "update_cog_link": "U kunt uw Cog <0>hier</0> bijwerken.",
-                "your_cog_version": "Uw Cog-versie is"
+                "your_cog_version": "Uw Cog-versie is",
+                "up_to_date": "Cog up to date"
             },
             "configuration_screen": {
                 "addons": "Uitbreidingen",
@@ -933,9 +999,15 @@ var resources = {
                 "manage_expansions": "Beheer de uitbreidingen van Marty",
                 "open": "Openen",
                 "update_marty": "Update je Marty",
-                "wifi": "Wifi"
+                "wifi": "Wifi",
+                "marty_up_to_date": "Marty up to date",
+                "update_marty_link": "You can update your Marty <0>here</0>."
             },
             "connection": {
+                "unplugged_modal_title": "Marty Unplugged",
+                "unplugged_modal_heading": "Couldn't connect to your Marty!",
+                "unplugged_modal_body": "Your Marty is currently in unplugged mode. If you want to dissconect Marty from unplugged mode, please press the \"MODE\"/\"A\" button on the back of Marty and try again!",
+                "unplugged_modal_button": "Got it!",
                 "cancel": "Annuleren",
                 "connecting_loading": "Dit zou niet lang moeten duren!",
                 "connecting_msg": "Aansluiten...",
@@ -1112,7 +1184,7 @@ var resources = {
                 "ssid_placeholder": "SSID",
                 "step": "STAP 1a."
             }
-        }
+        },
     },
     "it": {
         "translation": {
@@ -1245,6 +1317,14 @@ var resources = {
                 "reject": "NO, NON ACCETTO"
             },
             "calibration_screen": {
+                "colour_calibration": {
+                    "unplugged_modal_title": "Unplugged",
+                    "air_countdown": "Hold Marty in the air. Sampling in {{seconds}}...",
+                    "resetting_offsets": "Resetting colour sensor offsets...",
+                    "usb_required": "Please connect Marty via USB to calibrate the colour sensor.",
+                    "warming_up": "Warming up colour sensor... {{seconds}}...",
+                    "white_countdown": "Hold Marty on white. Sampling in {{seconds}}...,"
+                },
                 "arm_calibration": "CALIBRAZIONE DEL BRACCIO",
                 "arms01_hint": "Premere il pulsante una volta che le sue braccia sono dritte verso il basso",
                 "arms01_title": "Sposta le braccia di Marty in modo che siano dritte lungo i suoi fianchi",
@@ -1253,6 +1333,15 @@ var resources = {
                 "colour_sensor_hint": "Posiziona Marty su una superficie bianca e inizia la calibrazione",
                 "colour_sensor_title": "Calibrazione del sensore di colore",
                 "communicating": "Comunicare con il tuo Marty...",
+                "calibrating_air_initial": "Capturing air reading...",
+                "calibrating_air_hold": "Keep holding, it'll be done soon.",
+                "calibrating_white": "Calibrating on white surface...",
+                "finish_calibration": "Finish Calibration",
+                "lift_in_air": "Lift Marty about 30cm into the air, then start calibration.",
+                "lift_in_air_warning": "Robot not in the air. Please lift it up.",
+                "lift_in_air_error": "Please lift Marty into the air and try again.",
+                "place_on_white_finish": "Place Marty on a white surface and finish calibration!",
+                "start_air_calibration": "Start Air Calibration",
                 "default_hint": "Suggerimento",
                 "default_title": "Titolo",
                 "done_hint": "Premere il pulsante BACK per effettuare un'ulteriore calibrazione o terminare",
@@ -1284,7 +1373,8 @@ var resources = {
                 "coming_soon": "Prossimamente...",
                 "not_supported": "La configurazione Cog non è supportata su questo dispositivo.",
                 "update_cog_link": "Puoi aggiornare il tuo Cog <0>qui</0>.",
-                "your_cog_version": "La tua versione di Cog è"
+                "your_cog_version": "La tua versione di Cog è",
+                "up_to_date": "Cog up to date"
             },
             "configuration_screen": {
                 "addons": "Componenti aggiuntivi",
@@ -1301,9 +1391,15 @@ var resources = {
                 "manage_expansions": "Gestisci le espansioni di Marty",
                 "open": "Aprire",
                 "update_marty": "Aggiorna il tuo Marty",
-                "wifi": "Wifi"
+                "wifi": "Wifi",
+                "marty_up_to_date": "Marty up to date",
+                "update_marty_link": "You can update your Marty <0>here</0>."
             },
             "connection": {
+                "unplugged_modal_title": "Marty Unplugged",
+                "unplugged_modal_heading": "Couldn't connect to your Marty!",
+                "unplugged_modal_body": "Your Marty is currently in unplugged mode. If you want to dissconect Marty from unplugged mode, please press the \"MODE\"/\"A\" button on the back of Marty and try again!",
+                "unplugged_modal_button": "Got it!",
                 "cancel": "Cancellare",
                 "connecting_loading": "Non dovrebbe volerci molto!",
                 "connecting_msg": "Connessione in corso...",
@@ -1480,7 +1576,7 @@ var resources = {
                 "ssid_placeholder": "SSID",
                 "step": "FASE 1a."
             }
-        }
+        },
     },
     "fr": {
         "translation": {
@@ -1613,6 +1709,14 @@ var resources = {
                 "reject": "NON, JE N'ACCEPTE PAS"
             },
             "calibration_screen": {
+                "colour_calibration": {
+                    "unplugged_modal_title": "Unplugged",
+                    "air_countdown": "Hold Marty in the air. Sampling in {{seconds}}...",
+                    "resetting_offsets": "Resetting colour sensor offsets...",
+                    "usb_required": "Please connect Marty via USB to calibrate the colour sensor.",
+                    "warming_up": "Warming up colour sensor... {{seconds}}...",
+                    "white_countdown": "Hold Marty on white. Sampling in {{seconds}}...,"
+                },
                 "arm_calibration": "ÉTALONNAGE DU BRAS",
                 "arms01_hint": "Appuyez sur le bouton une fois que ses bras sont tendus vers le bas.",
                 "arms01_title": "Déplacez les bras de Marty de façon à ce qu'ils soient droits le long de ses flancs.",
@@ -1621,6 +1725,15 @@ var resources = {
                 "colour_sensor_hint": "Placez Marty sur une surface blanche et lancez l'étalonnage.",
                 "colour_sensor_title": "Calibrage du capteur de couleur",
                 "communicating": "Communiquer avec votre Marty...",
+                "calibrating_air_initial": "Capturing air reading...",
+                "calibrating_air_hold": "Keep holding, it'll be done soon.",
+                "calibrating_white": "Calibrating on white surface...",
+                "finish_calibration": "Finish Calibration",
+                "lift_in_air": "Lift Marty about 30cm into the air, then start calibration.",
+                "lift_in_air_warning": "Robot not in the air. Please lift it up.",
+                "lift_in_air_error": "Please lift Marty into the air and try again.",
+                "place_on_white_finish": "Place Marty on a white surface and finish calibration!",
+                "start_air_calibration": "Start Air Calibration",
                 "default_hint": "Indice",
                 "default_title": "Titre",
                 "done_hint": "Appuyez sur le bouton RETOUR pour effectuer un étalonnage supplémentaire ou terminer.",
@@ -1652,7 +1765,8 @@ var resources = {
                 "coming_soon": "À venir...",
                 "not_supported": "La configuration par engrenages n'est pas prise en charge sur cet appareil.",
                 "update_cog_link": "Vous pouvez mettre à jour votre Cog <0>ici</0>.",
-                "your_cog_version": "Votre version Cog est"
+                "your_cog_version": "Votre version Cog est",
+                "up_to_date": "Cog up to date"
             },
             "configuration_screen": {
                 "addons": "Modules complémentaires",
@@ -1669,9 +1783,15 @@ var resources = {
                 "manage_expansions": "Gérer les expansions de Marty",
                 "open": "Ouvrir",
                 "update_marty": "Mettez à jour votre Marty",
-                "wifi": "Wi-Fi"
+                "wifi": "Wi-Fi",
+                "marty_up_to_date": "Marty up to date",
+                "update_marty_link": "You can update your Marty <0>here</0>."
             },
             "connection": {
+                "unplugged_modal_title": "Marty Unplugged",
+                "unplugged_modal_heading": "Couldn't connect to your Marty!",
+                "unplugged_modal_body": "Your Marty is currently in unplugged mode. If you want to dissconect Marty from unplugged mode, please press the \"MODE\"/\"A\" button on the back of Marty and try again!",
+                "unplugged_modal_button": "Got it!",
                 "cancel": "Annuler",
                 "connecting_loading": "Ça ne devrait pas prendre longtemps !",
                 "connecting_msg": "De liaison...",
@@ -1848,7 +1968,7 @@ var resources = {
                 "ssid_placeholder": "SSID",
                 "step": "ÉTAPE 1a."
             }
-        }
+        },
     },
     "de": {
         "translation": {
@@ -1981,6 +2101,14 @@ var resources = {
                 "reject": "NEIN, ICH AKZEPTIERE NICHT"
             },
             "calibration_screen": {
+                "colour_calibration": {
+                    "unplugged_modal_title": "Unplugged",
+                    "air_countdown": "Hold Marty in the air. Sampling in {{seconds}}...",
+                    "resetting_offsets": "Resetting colour sensor offsets...",
+                    "usb_required": "Please connect Marty via USB to calibrate the colour sensor.",
+                    "warming_up": "Warming up colour sensor... {{seconds}}...",
+                    "white_countdown": "Hold Marty on white. Sampling in {{seconds}}...,"
+                },
                 "arm_calibration": "ARM-KALIBRIERUNG",
                 "arms01_hint": "Drücken Sie den Knopf, sobald seine Arme gerade nach unten hängen.",
                 "arms01_title": "Bewegen Sie Martys Arme so, dass sie gerade an seinen Seiten herunterhängen.",
@@ -1989,6 +2117,15 @@ var resources = {
                 "colour_sensor_hint": "Platzieren Sie Marty auf einer weißen Oberfläche und starten Sie die Kalibrierung.",
                 "colour_sensor_title": "Farbsensorkalibrierung",
                 "communicating": "Kommunikation mit Ihrem Marty...",
+                "calibrating_air_initial": "Capturing air reading...",
+                "calibrating_air_hold": "Keep holding, it'll be done soon.",
+                "calibrating_white": "Calibrating on white surface...",
+                "finish_calibration": "Finish Calibration",
+                "lift_in_air": "Lift Marty about 30cm into the air, then start calibration.",
+                "lift_in_air_warning": "Robot not in the air. Please lift it up.",
+                "lift_in_air_error": "Please lift Marty into the air and try again.",
+                "place_on_white_finish": "Place Marty on a white surface and finish calibration!",
+                "start_air_calibration": "Start Air Calibration",
                 "default_hint": "Hinweis",
                 "default_title": "Titel",
                 "done_hint": "Drücken Sie die ZURÜCK-Taste, um die Kalibrierung fortzusetzen oder den Vorgang abzuschließen.",
@@ -2020,7 +2157,8 @@ var resources = {
                 "coming_soon": "Demnächst verfügbar...",
                 "not_supported": "Die Cog-Konfiguration wird von diesem Gerät nicht unterstützt.",
                 "update_cog_link": "Sie können Ihr Cog <0>hier</0> aktualisieren.",
-                "your_cog_version": "Ihre Cog-Version ist"
+                "your_cog_version": "Ihre Cog-Version ist",
+                "up_to_date": "Cog up to date"
             },
             "configuration_screen": {
                 "addons": "Add-ons",
@@ -2037,9 +2175,15 @@ var resources = {
                 "manage_expansions": "Verwalten Sie Martys Expansionen",
                 "open": "Offen",
                 "update_marty": "Aktualisieren Sie Ihren Marty",
-                "wifi": "W-lan"
+                "wifi": "W-lan",
+                "marty_up_to_date": "Marty up to date",
+                "update_marty_link": "You can update your Marty <0>here</0>."
             },
             "connection": {
+                "unplugged_modal_title": "Marty Unplugged",
+                "unplugged_modal_heading": "Couldn't connect to your Marty!",
+                "unplugged_modal_body": "Your Marty is currently in unplugged mode. If you want to dissconect Marty from unplugged mode, please press the \"MODE\"/\"A\" button on the back of Marty and try again!",
+                "unplugged_modal_button": "Got it!",
                 "cancel": "Stornieren",
                 "connecting_loading": "Das sollte nicht lange dauern!",
                 "connecting_msg": "Verbindung wird hergestellt...",
@@ -2216,7 +2360,7 @@ var resources = {
                 "ssid_placeholder": "SSID",
                 "step": "SCHRITT 1a."
             }
-        }
+        },
     },
     "bg": {
         "translation": {
@@ -2349,6 +2493,14 @@ var resources = {
                 "reject": "НЕ, НЕ ПРИЕМАМ"
             },
             "calibration_screen": {
+                "colour_calibration": {
+                    "unplugged_modal_title": "Unplugged",
+                    "air_countdown": "Hold Marty in the air. Sampling in {{seconds}}...",
+                    "resetting_offsets": "Resetting colour sensor offsets...",
+                    "usb_required": "Please connect Marty via USB to calibrate the colour sensor.",
+                    "warming_up": "Warming up colour sensor... {{seconds}}...",
+                    "white_countdown": "Hold Marty on white. Sampling in {{seconds}}...,"
+                },
                 "arm_calibration": "КАЛИБРИРАНЕ НА РЪКАТА",
                 "arms01_hint": "Натиснете бутона, след като ръцете му са спуснати надолу",
                 "arms01_title": "Преместете ръцете на Марти, така че да са спуснати надолу, встрани от тялото",
@@ -2357,6 +2509,15 @@ var resources = {
                 "colour_sensor_hint": "Поставете Marty върху бяла повърхност и започнете калибрирането",
                 "colour_sensor_title": "Калибриране на цветен сензор",
                 "communicating": "Общуване с вашия Марти...",
+                "calibrating_air_initial": "Capturing air reading...",
+                "calibrating_air_hold": "Keep holding, it'll be done soon.",
+                "calibrating_white": "Calibrating on white surface...",
+                "finish_calibration": "Finish Calibration",
+                "lift_in_air": "Lift Marty about 30cm into the air, then start calibration.",
+                "lift_in_air_warning": "Robot not in the air. Please lift it up.",
+                "lift_in_air_error": "Please lift Marty into the air and try again.",
+                "place_on_white_finish": "Place Marty on a white surface and finish calibration!",
+                "start_air_calibration": "Start Air Calibration",
                 "default_hint": "Подсказка",
                 "default_title": "Заглавие",
                 "done_hint": "Натиснете бутона НАЗАД, за да извършите допълнително калибриране или да завършите",
@@ -2388,7 +2549,8 @@ var resources = {
                 "coming_soon": "Очаквайте скоро...",
                 "not_supported": "Конфигурацията на Cog не се поддържа на това устройство.",
                 "update_cog_link": "Можете да актуализирате своя Cog <0>тук</0>.",
-                "your_cog_version": "Вашата Cog версия е"
+                "your_cog_version": "Вашата Cog версия е",
+                "up_to_date": "Cog up to date"
             },
             "configuration_screen": {
                 "addons": "Разширения",
@@ -2405,9 +2567,15 @@ var resources = {
                 "manage_expansions": "Управлявайте разширенията на Марти",
                 "open": "отворено",
                 "update_marty": "Актуализирайте вашия Марти",
-                "wifi": "Wifi"
+                "wifi": "Wifi",
+                "marty_up_to_date": "Marty up to date",
+                "update_marty_link": "You can update your Marty <0>here</0>."
             },
             "connection": {
+                "unplugged_modal_title": "Marty Unplugged",
+                "unplugged_modal_heading": "Couldn't connect to your Marty!",
+                "unplugged_modal_body": "Your Marty is currently in unplugged mode. If you want to dissconect Marty from unplugged mode, please press the \"MODE\"/\"A\" button on the back of Marty and try again!",
+                "unplugged_modal_button": "Got it!",
                 "cancel": "Отказ",
                 "connecting_loading": "Това няма да отнеме много време!",
                 "connecting_msg": "Свързване...",
@@ -2584,7 +2752,7 @@ var resources = {
                 "ssid_placeholder": "SSID",
                 "step": "СТЪПКА 1а."
             }
-        }
+        },
     },
     "da": {
         "translation": {
@@ -2717,6 +2885,14 @@ var resources = {
                 "reject": "NEJ, JEG ACCEPTERER IKKE"
             },
             "calibration_screen": {
+                "colour_calibration": {
+                    "unplugged_modal_title": "Unplugged",
+                    "air_countdown": "Hold Marty in the air. Sampling in {{seconds}}...",
+                    "resetting_offsets": "Resetting colour sensor offsets...",
+                    "usb_required": "Please connect Marty via USB to calibrate the colour sensor.",
+                    "warming_up": "Warming up colour sensor... {{seconds}}...",
+                    "white_countdown": "Hold Marty on white. Sampling in {{seconds}}...,"
+                },
                 "arm_calibration": "ARMKALIBRERING",
                 "arms01_hint": "Tryk på knappen, når hans arme er lige nede",
                 "arms01_title": "Flyt Martys arme, så de er lige ned langs siderne.",
@@ -2725,6 +2901,15 @@ var resources = {
                 "colour_sensor_hint": "Placer Marty på en hvid overflade og start kalibreringen",
                 "colour_sensor_title": "Kalibrering af farvesensor",
                 "communicating": "Kommunikerer med din Marty...",
+                "calibrating_air_initial": "Capturing air reading...",
+                "calibrating_air_hold": "Keep holding, it'll be done soon.",
+                "calibrating_white": "Calibrating on white surface...",
+                "finish_calibration": "Finish Calibration",
+                "lift_in_air": "Lift Marty about 30cm into the air, then start calibration.",
+                "lift_in_air_warning": "Robot not in the air. Please lift it up.",
+                "lift_in_air_error": "Please lift Marty into the air and try again.",
+                "place_on_white_finish": "Place Marty on a white surface and finish calibration!",
+                "start_air_calibration": "Start Air Calibration",
                 "default_hint": "Antydning",
                 "default_title": "Titel",
                 "done_hint": "Tryk på TILBAGE-knappen for at udføre yderligere kalibrering eller afslutte",
@@ -2756,7 +2941,8 @@ var resources = {
                 "coming_soon": "Kommer snart...",
                 "not_supported": "Tandhjulskonfiguration understøttes ikke på denne enhed.",
                 "update_cog_link": "Du kan opdatere dit Cog <0>her</0>.",
-                "your_cog_version": "Din Cog-version er"
+                "your_cog_version": "Din Cog-version er",
+                "up_to_date": "Cog up to date"
             },
             "configuration_screen": {
                 "addons": "Tilføjelser",
@@ -2773,9 +2959,15 @@ var resources = {
                 "manage_expansions": "Administrer Martys udvidelser",
                 "open": "Åben",
                 "update_marty": "Opdater din Marty",
-                "wifi": "Wi-Fi"
+                "wifi": "Wi-Fi",
+                "marty_up_to_date": "Marty up to date",
+                "update_marty_link": "You can update your Marty <0>here</0>."
             },
             "connection": {
+                "unplugged_modal_title": "Marty Unplugged",
+                "unplugged_modal_heading": "Couldn't connect to your Marty!",
+                "unplugged_modal_body": "Your Marty is currently in unplugged mode. If you want to dissconect Marty from unplugged mode, please press the \"MODE\"/\"A\" button on the back of Marty and try again!",
+                "unplugged_modal_button": "Got it!",
                 "cancel": "Ophæve",
                 "connecting_loading": "Det burde ikke tage lang tid!",
                 "connecting_msg": "Forbinder...",
@@ -2952,7 +3144,7 @@ var resources = {
                 "ssid_placeholder": "SSID",
                 "step": "TRIN 1a."
             }
-        }
+        },
     },
     "no": {
         "translation": {
@@ -3085,6 +3277,14 @@ var resources = {
                 "reject": "NEI, JEG GODTAR IKKE"
             },
             "calibration_screen": {
+                "colour_calibration": {
+                    "unplugged_modal_title": "Unplugged",
+                    "air_countdown": "Hold Marty in the air. Sampling in {{seconds}}...",
+                    "resetting_offsets": "Resetting colour sensor offsets...",
+                    "usb_required": "Please connect Marty via USB to calibrate the colour sensor.",
+                    "warming_up": "Warming up colour sensor... {{seconds}}...",
+                    "white_countdown": "Hold Marty on white. Sampling in {{seconds}}...,"
+                },
                 "arm_calibration": "ARMKALIBRERING",
                 "arms01_hint": "Trykk på knappen når armene hans er rett ned",
                 "arms01_title": "Beveg Martys armer slik at de er rett ned langs sidene.",
@@ -3093,6 +3293,15 @@ var resources = {
                 "colour_sensor_hint": "Plasser Marty på en hvit overflate og start kalibreringen",
                 "colour_sensor_title": "Kalibrering av fargesensor",
                 "communicating": "Kommuniserer med Marty...",
+                "calibrating_air_initial": "Capturing air reading...",
+                "calibrating_air_hold": "Keep holding, it'll be done soon.",
+                "calibrating_white": "Calibrating on white surface...",
+                "finish_calibration": "Finish Calibration",
+                "lift_in_air": "Lift Marty about 30cm into the air, then start calibration.",
+                "lift_in_air_warning": "Robot not in the air. Please lift it up.",
+                "lift_in_air_error": "Please lift Marty into the air and try again.",
+                "place_on_white_finish": "Place Marty on a white surface and finish calibration!",
+                "start_air_calibration": "Start Air Calibration",
                 "default_hint": "Hint",
                 "default_title": "Tittel",
                 "done_hint": "Trykk på TILBAKE-knappen for å gjøre videre kalibrering eller fullføre",
@@ -3124,7 +3333,8 @@ var resources = {
                 "coming_soon": "Kommer snart...",
                 "not_supported": "Tannhjulkonfigurasjon støttes ikke på denne enheten.",
                 "update_cog_link": "Du kan oppdatere tannhjulet ditt <0>her</0>.",
-                "your_cog_version": "Din Cog-versjon er"
+                "your_cog_version": "Din Cog-versjon er",
+                "up_to_date": "Cog up to date"
             },
             "configuration_screen": {
                 "addons": "Tillegg",
@@ -3141,9 +3351,15 @@ var resources = {
                 "manage_expansions": "Administrer Martys utvidelser",
                 "open": "Åpne",
                 "update_marty": "Oppdater Marty-en din",
-                "wifi": "Wi-Fi"
+                "wifi": "Wi-Fi",
+                "marty_up_to_date": "Marty up to date",
+                "update_marty_link": "You can update your Marty <0>here</0>."
             },
             "connection": {
+                "unplugged_modal_title": "Marty Unplugged",
+                "unplugged_modal_heading": "Couldn't connect to your Marty!",
+                "unplugged_modal_body": "Your Marty is currently in unplugged mode. If you want to dissconect Marty from unplugged mode, please press the \"MODE\"/\"A\" button on the back of Marty and try again!",
+                "unplugged_modal_button": "Got it!",
                 "cancel": "Kansellere",
                 "connecting_loading": "Dette burde ikke ta lang tid!",
                 "connecting_msg": "Kobler til...",
@@ -3320,7 +3536,7 @@ var resources = {
                 "ssid_placeholder": "SSID",
                 "step": "TRINN 1a."
             }
-        }
+        },
     },
     "cs": {
         "translation": {
@@ -3453,6 +3669,14 @@ var resources = {
                 "reject": "NE, NEPŘIJÍMÁM"
             },
             "calibration_screen": {
+                "colour_calibration": {
+                    "unplugged_modal_title": "Unplugged",
+                    "air_countdown": "Hold Marty in the air. Sampling in {{seconds}}...",
+                    "resetting_offsets": "Resetting colour sensor offsets...",
+                    "usb_required": "Please connect Marty via USB to calibrate the colour sensor.",
+                    "warming_up": "Warming up colour sensor... {{seconds}}...",
+                    "white_countdown": "Hold Marty on white. Sampling in {{seconds}}...,"
+                },
                 "arm_calibration": "KALIBRACE RAMENE",
                 "arms01_hint": "Stiskněte tlačítko, jakmile má paže rovně dolů",
                 "arms01_title": "Pohni Martyho pažemi tak, aby byly přímo dolů podél těla",
@@ -3461,6 +3685,15 @@ var resources = {
                 "colour_sensor_hint": "Umístěte Martyho na bílý povrch a spusťte kalibraci.",
                 "colour_sensor_title": "Kalibrace barevného senzoru",
                 "communicating": "Komunikace s vaším Martym...",
+                "calibrating_air_initial": "Capturing air reading...",
+                "calibrating_air_hold": "Keep holding, it'll be done soon.",
+                "calibrating_white": "Calibrating on white surface...",
+                "finish_calibration": "Finish Calibration",
+                "lift_in_air": "Lift Marty about 30cm into the air, then start calibration.",
+                "lift_in_air_warning": "Robot not in the air. Please lift it up.",
+                "lift_in_air_error": "Please lift Marty into the air and try again.",
+                "place_on_white_finish": "Place Marty on a white surface and finish calibration!",
+                "start_air_calibration": "Start Air Calibration",
                 "default_hint": "Náznak",
                 "default_title": "Titul",
                 "done_hint": "Stiskněte tlačítko ZPĚT pro provedení další kalibrace nebo dokončení",
@@ -3492,7 +3725,8 @@ var resources = {
                 "coming_soon": "Již brzy...",
                 "not_supported": "Konfigurace Cog není na tomto zařízení podporována.",
                 "update_cog_link": "Svůj Cog můžete aktualizovat <0>zde</0>.",
-                "your_cog_version": "Vaše verze Cog je"
+                "your_cog_version": "Vaše verze Cog je",
+                "up_to_date": "Cog up to date"
             },
             "configuration_screen": {
                 "addons": "Doplňky",
@@ -3509,9 +3743,15 @@ var resources = {
                 "manage_expansions": "Spravujte Martyho expanze",
                 "open": "OTEVŘENO",
                 "update_marty": "Aktualizujte svého Martyho",
-                "wifi": "Wi-Fi"
+                "wifi": "Wi-Fi",
+                "marty_up_to_date": "Marty up to date",
+                "update_marty_link": "You can update your Marty <0>here</0>."
             },
             "connection": {
+                "unplugged_modal_title": "Marty Unplugged",
+                "unplugged_modal_heading": "Couldn't connect to your Marty!",
+                "unplugged_modal_body": "Your Marty is currently in unplugged mode. If you want to dissconect Marty from unplugged mode, please press the \"MODE\"/\"A\" button on the back of Marty and try again!",
+                "unplugged_modal_button": "Got it!",
                 "cancel": "Zrušit",
                 "connecting_loading": "To by nemělo trvat dlouho!",
                 "connecting_msg": "Spojovací...",
@@ -3688,7 +3928,7 @@ var resources = {
                 "ssid_placeholder": "SSID",
                 "step": "KROK 1a."
             }
-        }
+        },
     },
     "es": {
         "translation": {
@@ -3821,6 +4061,14 @@ var resources = {
                 "reject": "NO, NO ACEPTO"
             },
             "calibration_screen": {
+                "colour_calibration": {
+                    "unplugged_modal_title": "Unplugged",
+                    "air_countdown": "Hold Marty in the air. Sampling in {{seconds}}...",
+                    "resetting_offsets": "Resetting colour sensor offsets...",
+                    "usb_required": "Please connect Marty via USB to calibrate the colour sensor.",
+                    "warming_up": "Warming up colour sensor... {{seconds}}...",
+                    "white_countdown": "Hold Marty on white. Sampling in {{seconds}}...,"
+                },
                 "arm_calibration": "CALIBRACIÓN DEL BRAZO",
                 "arms01_hint": "Presione el botón una vez que sus brazos estén hacia abajo.",
                 "arms01_title": "Mueva los brazos de Marty para que queden rectos a sus costados.",
@@ -3829,6 +4077,15 @@ var resources = {
                 "colour_sensor_hint": "Coloque a Marty sobre una superficie blanca y comience la calibración.",
                 "colour_sensor_title": "Calibración del sensor de color",
                 "communicating": "Comunicándose con su Marty...",
+                "calibrating_air_initial": "Capturing air reading...",
+                "calibrating_air_hold": "Keep holding, it'll be done soon.",
+                "calibrating_white": "Calibrating on white surface...",
+                "finish_calibration": "Finish Calibration",
+                "lift_in_air": "Lift Marty about 30cm into the air, then start calibration.",
+                "lift_in_air_warning": "Robot not in the air. Please lift it up.",
+                "lift_in_air_error": "Please lift Marty into the air and try again.",
+                "place_on_white_finish": "Place Marty on a white surface and finish calibration!",
+                "start_air_calibration": "Start Air Calibration",
                 "default_hint": "Pista",
                 "default_title": "Título",
                 "done_hint": "Presione el botón ATRÁS para realizar más calibraciones o finalizar.",
@@ -3860,7 +4117,8 @@ var resources = {
                 "coming_soon": "Muy pronto...",
                 "not_supported": "La configuración de Cog no es compatible con este dispositivo.",
                 "update_cog_link": "Puedes actualizar tu Cog <0>aquí</0>.",
-                "your_cog_version": "Tu versión de Cog es"
+                "your_cog_version": "Tu versión de Cog es",
+                "up_to_date": "Cog up to date"
             },
             "configuration_screen": {
                 "addons": "Complementos",
@@ -3877,9 +4135,15 @@ var resources = {
                 "manage_expansions": "Gestionar las expansiones de Marty",
                 "open": "Abierto",
                 "update_marty": "Actualiza tu Marty",
-                "wifi": "Wifi"
+                "wifi": "Wifi",
+                "marty_up_to_date": "Marty up to date",
+                "update_marty_link": "You can update your Marty <0>here</0>."
             },
             "connection": {
+                "unplugged_modal_title": "Marty Unplugged",
+                "unplugged_modal_heading": "Couldn't connect to your Marty!",
+                "unplugged_modal_body": "Your Marty is currently in unplugged mode. If you want to dissconect Marty from unplugged mode, please press the \"MODE\"/\"A\" button on the back of Marty and try again!",
+                "unplugged_modal_button": "Got it!",
                 "cancel": "Cancelar",
                 "connecting_loading": "¡Esto no debería tomar mucho tiempo!",
                 "connecting_msg": "Conectando...",
@@ -4056,7 +4320,7 @@ var resources = {
                 "ssid_placeholder": "SSID",
                 "step": "PASO 1a."
             }
-        }
+        },
     },
     "sv": {
         "translation": {
@@ -4189,6 +4453,14 @@ var resources = {
                 "reject": "NEJ, JAG ACCEPTERAR INTE"
             },
             "calibration_screen": {
+                "colour_calibration": {
+                    "unplugged_modal_title": "Unplugged",
+                    "air_countdown": "Hold Marty in the air. Sampling in {{seconds}}...",
+                    "resetting_offsets": "Resetting colour sensor offsets...",
+                    "usb_required": "Please connect Marty via USB to calibrate the colour sensor.",
+                    "warming_up": "Warming up colour sensor... {{seconds}}...",
+                    "white_countdown": "Hold Marty on white. Sampling in {{seconds}}...,"
+                },
                 "arm_calibration": "ARMKALIBRERING",
                 "arms01_hint": "Tryck på knappen när hans armar är rakt ner",
                 "arms01_title": "Rör Martys armar så att de är rakt ner längs sidorna",
@@ -4197,6 +4469,15 @@ var resources = {
                 "colour_sensor_hint": "Placera Marty på en vit yta och starta kalibreringen",
                 "colour_sensor_title": "Kalibrering av färgsensor",
                 "communicating": "Kommunicerar med din Marty...",
+                "calibrating_air_initial": "Capturing air reading...",
+                "calibrating_air_hold": "Keep holding, it'll be done soon.",
+                "calibrating_white": "Calibrating on white surface...",
+                "finish_calibration": "Finish Calibration",
+                "lift_in_air": "Lift Marty about 30cm into the air, then start calibration.",
+                "lift_in_air_warning": "Robot not in the air. Please lift it up.",
+                "lift_in_air_error": "Please lift Marty into the air and try again.",
+                "place_on_white_finish": "Place Marty on a white surface and finish calibration!",
+                "start_air_calibration": "Start Air Calibration",
                 "default_hint": "Antydan",
                 "default_title": "Titel",
                 "done_hint": "Tryck på TILLBAKA-knappen för att göra ytterligare kalibrering eller avsluta",
@@ -4228,7 +4509,8 @@ var resources = {
                 "coming_soon": "Kommer snart...",
                 "not_supported": "Kugghjulskonfiguration stöds inte på den här enheten.",
                 "update_cog_link": "Du kan uppdatera ditt kugghjul <0>här</0>.",
-                "your_cog_version": "Din Cog-version är"
+                "your_cog_version": "Din Cog-version är",
+                "up_to_date": "Cog up to date"
             },
             "configuration_screen": {
                 "addons": "Tillägg",
@@ -4245,9 +4527,15 @@ var resources = {
                 "manage_expansions": "Hantera Martys expansioner",
                 "open": "Öppna",
                 "update_marty": "Uppdatera din Marty",
-                "wifi": "Wifi"
+                "wifi": "Wifi",
+                "marty_up_to_date": "Marty up to date",
+                "update_marty_link": "You can update your Marty <0>here</0>."
             },
             "connection": {
+                "unplugged_modal_title": "Marty Unplugged",
+                "unplugged_modal_heading": "Couldn't connect to your Marty!",
+                "unplugged_modal_body": "Your Marty is currently in unplugged mode. If you want to dissconect Marty from unplugged mode, please press the \"MODE\"/\"A\" button on the back of Marty and try again!",
+                "unplugged_modal_button": "Got it!",
                 "cancel": "Avboka",
                 "connecting_loading": "Det här borde inte ta lång tid!",
                 "connecting_msg": "Ansluter...",
@@ -4424,7 +4712,7 @@ var resources = {
                 "ssid_placeholder": "SSID",
                 "step": "STEG 1a."
             }
-        }
+        },
     },
     "fi": {
         "translation": {
@@ -4557,6 +4845,14 @@ var resources = {
                 "reject": "EI, EN HYVÄKSY"
             },
             "calibration_screen": {
+                "colour_calibration": {
+                    "unplugged_modal_title": "Unplugged",
+                    "air_countdown": "Hold Marty in the air. Sampling in {{seconds}}...",
+                    "resetting_offsets": "Resetting colour sensor offsets...",
+                    "usb_required": "Please connect Marty via USB to calibrate the colour sensor.",
+                    "warming_up": "Warming up colour sensor... {{seconds}}...",
+                    "white_countdown": "Hold Marty on white. Sampling in {{seconds}}...,"
+                },
                 "arm_calibration": "KÄDEN KALIBROINTI",
                 "arms01_hint": "Paina nappia, kun hänen kätensä ovat suorassa alhaalla",
                 "arms01_title": "Siirrä Martyn käsivarsia niin, että ne ovat suorina alaspäin sen sivuilla.",
@@ -4565,6 +4861,15 @@ var resources = {
                 "colour_sensor_hint": "Aseta Marty valkoiselle pinnalle ja aloita kalibrointi",
                 "colour_sensor_title": "Värianturin kalibrointi",
                 "communicating": "Kommunikointi Martyn kanssa...",
+                "calibrating_air_initial": "Capturing air reading...",
+                "calibrating_air_hold": "Keep holding, it'll be done soon.",
+                "calibrating_white": "Calibrating on white surface...",
+                "finish_calibration": "Finish Calibration",
+                "lift_in_air": "Lift Marty about 30cm into the air, then start calibration.",
+                "lift_in_air_warning": "Robot not in the air. Please lift it up.",
+                "lift_in_air_error": "Please lift Marty into the air and try again.",
+                "place_on_white_finish": "Place Marty on a white surface and finish calibration!",
+                "start_air_calibration": "Start Air Calibration",
                 "default_hint": "Vihje",
                 "default_title": "Otsikko",
                 "done_hint": "Jatka kalibrointia tai lopeta painamalla TAKAISIN-painiketta.",
@@ -4596,7 +4901,8 @@ var resources = {
                 "coming_soon": "Tulossa pian...",
                 "not_supported": "Cog-määritystä ei tueta tässä laitteessa.",
                 "update_cog_link": "Voit päivittää Cogisi <0>tässä</0>.",
-                "your_cog_version": "Cog-versiosi on"
+                "your_cog_version": "Cog-versiosi on",
+                "up_to_date": "Cog up to date"
             },
             "configuration_screen": {
                 "addons": "Lisäosat",
@@ -4613,9 +4919,15 @@ var resources = {
                 "manage_expansions": "Hallitse Martyn laajennuksia",
                 "open": "Avata",
                 "update_marty": "Päivitä Marty-tilisi",
-                "wifi": "Wifi"
+                "wifi": "Wifi",
+                "marty_up_to_date": "Marty up to date",
+                "update_marty_link": "You can update your Marty <0>here</0>."
             },
             "connection": {
+                "unplugged_modal_title": "Marty Unplugged",
+                "unplugged_modal_heading": "Couldn't connect to your Marty!",
+                "unplugged_modal_body": "Your Marty is currently in unplugged mode. If you want to dissconect Marty from unplugged mode, please press the \"MODE\"/\"A\" button on the back of Marty and try again!",
+                "unplugged_modal_button": "Got it!",
                 "cancel": "Peruuttaa",
                 "connecting_loading": "Tämän ei pitäisi kestää kauan!",
                 "connecting_msg": "Yhdistetään...",
@@ -4792,7 +5104,7 @@ var resources = {
                 "ssid_placeholder": "SSID",
                 "step": "VAIHE 1a."
             }
-        }
+        },
     },
     "ar": {
         "translation": {
@@ -4925,6 +5237,14 @@ var resources = {
                 "reject": "لا، لا أقبل"
             },
             "calibration_screen": {
+                "colour_calibration": {
+                    "unplugged_modal_title": "Unplugged",
+                    "air_countdown": "Hold Marty in the air. Sampling in {{seconds}}...",
+                    "resetting_offsets": "Resetting colour sensor offsets...",
+                    "usb_required": "Please connect Marty via USB to calibrate the colour sensor.",
+                    "warming_up": "Warming up colour sensor... {{seconds}}...",
+                    "white_countdown": "Hold Marty on white. Sampling in {{seconds}}...,"
+                },
                 "arm_calibration": "معايرة الذراع",
                 "arms01_hint": "اضغط على الزر بمجرد أن تصبح ذراعيه مستقيمة لأسفل",
                 "arms01_title": "حرك ذراعي مارتي بحيث تكون مستقيمة إلى أسفل على جانبيه",
@@ -4933,6 +5253,15 @@ var resources = {
                 "colour_sensor_hint": "ضع مارتي على سطح أبيض وابدأ المعايرة",
                 "colour_sensor_title": "معايرة مستشعر الألوان",
                 "communicating": "التواصل مع مارتي الخاص بك...",
+                "calibrating_air_initial": "Capturing air reading...",
+                "calibrating_air_hold": "Keep holding, it'll be done soon.",
+                "calibrating_white": "Calibrating on white surface...",
+                "finish_calibration": "Finish Calibration",
+                "lift_in_air": "Lift Marty about 30cm into the air, then start calibration.",
+                "lift_in_air_warning": "Robot not in the air. Please lift it up.",
+                "lift_in_air_error": "Please lift Marty into the air and try again.",
+                "place_on_white_finish": "Place Marty on a white surface and finish calibration!",
+                "start_air_calibration": "Start Air Calibration",
                 "default_hint": "تَلمِيح",
                 "default_title": "عنوان",
                 "done_hint": "اضغط على زر الرجوع لإجراء مزيد من المعايرة أو الانتهاء",
@@ -4964,7 +5293,8 @@ var resources = {
                 "coming_soon": "قريباً...",
                 "not_supported": "لا يتم دعم تكوين Cog على هذا الجهاز.",
                 "update_cog_link": "يمكنك تحديث Cog الخاص بك <0>هنا</0>.",
-                "your_cog_version": "إصدار Cog الخاص بك هو"
+                "your_cog_version": "إصدار Cog الخاص بك هو",
+                "up_to_date": "Cog up to date"
             },
             "configuration_screen": {
                 "addons": "الإضافات",
@@ -4981,9 +5311,15 @@ var resources = {
                 "manage_expansions": "إدارة توسعات مارتي",
                 "open": "يفتح",
                 "update_marty": "تحديث مارتي الخاص بك",
-                "wifi": "واي فاي"
+                "wifi": "واي فاي",
+                "marty_up_to_date": "Marty up to date",
+                "update_marty_link": "You can update your Marty <0>here</0>."
             },
             "connection": {
+                "unplugged_modal_title": "Marty Unplugged",
+                "unplugged_modal_heading": "Couldn't connect to your Marty!",
+                "unplugged_modal_body": "Your Marty is currently in unplugged mode. If you want to dissconect Marty from unplugged mode, please press the \"MODE\"/\"A\" button on the back of Marty and try again!",
+                "unplugged_modal_button": "Got it!",
                 "cancel": "إلغاء",
                 "connecting_loading": "هذا لا ينبغي أن يستغرق وقتا طويلا !",
                 "connecting_msg": "جاري الاتصال...",
@@ -5160,7 +5496,7 @@ var resources = {
                 "ssid_placeholder": "معرف مجموعة الخدمة  (SSID)",
                 "step": "الخطوة 1أ ."
             }
-        }
+        },
     }
 };
 var warnedMissingKeys = new Set();