@ripwords/myinvois-client 0.3.0 → 0.3.1

package/dist/index40.cjs

@@ -1,17 +1,193 @@
 
-//#region src/types/unit/8X.d.ts
+//#region src/utils/validation.ts
 /**
-* Enum representing unit type codes starting with '8'.
+* Validates TIN format based on registration type
 */
-let UnitTypeCodeEnum_8X = /* @__PURE__ */ function(UnitTypeCodeEnum_8X$1) {
-	UnitTypeCodeEnum_8X$1["PoundPerSquareInchAbsolute"] = "80";
-	UnitTypeCodeEnum_8X$1["Henry"] = "81";
-	UnitTypeCodeEnum_8X$1["FootPoundForce"] = "85";
-	UnitTypeCodeEnum_8X$1["PoundPerCubicFoot"] = "87";
-	UnitTypeCodeEnum_8X$1["Poise"] = "89";
-	return UnitTypeCodeEnum_8X$1;
-}({});
+const validateTIN = (tin, registrationType) => {
+	const errors = [];
+	if (!tin) {
+		errors.push({
+			field: "tin",
+			code: "TIN_REQUIRED",
+			message: "TIN is required",
+			severity: "error"
+		});
+		return errors;
+	}
+	if (registrationType === "BRN" && !tin.startsWith("C")) errors.push({
+		field: "tin",
+		code: "TIN_FORMAT_INVALID",
+		message: "Company TIN should start with \"C\" for BRN registration",
+		severity: "warning"
+	});
+	if (registrationType === "NRIC" && !tin.startsWith("IG")) errors.push({
+		field: "tin",
+		code: "TIN_FORMAT_INVALID",
+		message: "Individual TIN should start with \"IG\" for NRIC registration",
+		severity: "warning"
+	});
+	if (tin.length > 14) errors.push({
+		field: "tin",
+		code: "TIN_LENGTH_INVALID",
+		message: "TIN cannot exceed 14 characters",
+		severity: "error"
+	});
+	return errors;
+};
+/**
+* Validates contact number format (E.164 standard)
+*/
+const validateContactNumber = (contactNumber) => {
+	const errors = [];
+	if (!contactNumber || contactNumber === "NA") return errors;
+	const e164Regex = /^\+[1-9]\d{1,14}$/;
+	if (!e164Regex.test(contactNumber)) errors.push({
+		field: "contactNumber",
+		code: "CONTACT_FORMAT_INVALID",
+		message: "Contact number must be in E.164 format (e.g., +60123456789)",
+		severity: "error"
+	});
+	if (contactNumber.length < 8) errors.push({
+		field: "contactNumber",
+		code: "CONTACT_LENGTH_INVALID",
+		message: "Contact number must be at least 8 characters",
+		severity: "error"
+	});
+	return errors;
+};
+/**
+* Validates monetary amounts
+*/
+const validateMonetaryAmount = (amount, fieldName, maxDigits = 18, maxDecimals = 2) => {
+	const errors = [];
+	if (amount < 0) errors.push({
+		field: fieldName,
+		code: "AMOUNT_NEGATIVE",
+		message: `${fieldName} cannot be negative`,
+		severity: "error"
+	});
+	const amountStr = amount.toString();
+	const [integerPart, decimalPart] = amountStr.split(".");
+	if (integerPart && integerPart.length > maxDigits - maxDecimals) errors.push({
+		field: fieldName,
+		code: "AMOUNT_DIGITS_EXCEEDED",
+		message: `${fieldName} exceeds maximum ${maxDigits} digits`,
+		severity: "error"
+	});
+	if (decimalPart && decimalPart.length > maxDecimals) errors.push({
+		field: fieldName,
+		code: "AMOUNT_DECIMALS_EXCEEDED",
+		message: `${fieldName} exceeds maximum ${maxDecimals} decimal places`,
+		severity: "error"
+	});
+	return errors;
+};
+/**
+* Validates line item tax calculation consistency for both fixed rate and percentage taxation
+*/
+const validateLineItemTax = (item, index) => {
+	const errors = [];
+	const tolerance = .01;
+	const hasFixedRate = item.taxPerUnitAmount !== void 0 && item.baseUnitMeasure !== void 0;
+	const hasPercentageRate = item.taxRate !== void 0;
+	if (!hasFixedRate && !hasPercentageRate) {
+		errors.push({
+			field: `lineItem[${index}]`,
+			code: "TAX_METHOD_MISSING",
+			message: `Line item ${index + 1} must specify either taxRate (for percentage) or taxPerUnitAmount + baseUnitMeasure (for fixed rate)`,
+			severity: "error"
+		});
+		return errors;
+	}
+	if (hasFixedRate && hasPercentageRate) errors.push({
+		field: `lineItem[${index}]`,
+		code: "TAX_METHOD_CONFLICT",
+		message: `Line item ${index + 1} cannot have both percentage and fixed rate tax methods`,
+		severity: "error"
+	});
+	if (hasFixedRate) {
+		if (item.baseUnitMeasureCode === void 0) errors.push({
+			field: `lineItem[${index}].baseUnitMeasureCode`,
+			code: "UNIT_CODE_MISSING",
+			message: `Line item ${index + 1} with fixed rate tax must specify baseUnitMeasureCode`,
+			severity: "error"
+		});
+		const expectedTaxAmount = item.taxPerUnitAmount * item.baseUnitMeasure;
+		if (Math.abs(item.taxAmount - expectedTaxAmount) > tolerance) errors.push({
+			field: `lineItem[${index}].taxAmount`,
+			code: "FIXED_TAX_CALCULATION_MISMATCH",
+			message: `Line item ${index + 1} tax amount (${item.taxAmount}) doesn't match fixed rate calculation (${item.taxPerUnitAmount} × ${item.baseUnitMeasure} = ${expectedTaxAmount})`,
+			severity: "error"
+		});
+	}
+	if (hasPercentageRate && !hasFixedRate) {
+		const expectedTaxAmount = item.totalTaxableAmountPerLine * item.taxRate / 100;
+		if (Math.abs(item.taxAmount - expectedTaxAmount) > tolerance) errors.push({
+			field: `lineItem[${index}].taxAmount`,
+			code: "PERCENTAGE_TAX_CALCULATION_MISMATCH",
+			message: `Line item ${index + 1} tax amount (${item.taxAmount}) doesn't match percentage calculation (${item.totalTaxableAmountPerLine} × ${item.taxRate}% = ${expectedTaxAmount})`,
+			severity: "error"
+		});
+	}
+	return errors;
+};
+/**
+* Validates tax calculation consistency
+*/
+const validateTaxCalculations = (invoice) => {
+	const errors = [];
+	invoice.invoiceLineItems.forEach((item, index) => {
+		errors.push(...validateLineItemTax(item, index));
+	});
+	const expectedTaxExclusive = invoice.invoiceLineItems.reduce((sum, item) => sum + item.totalTaxableAmountPerLine, 0);
+	const expectedTaxAmount = invoice.invoiceLineItems.reduce((sum, item) => sum + item.taxAmount, 0);
+	const tolerance = .01;
+	if (Math.abs(invoice.legalMonetaryTotal.taxExclusiveAmount - expectedTaxExclusive) > tolerance) errors.push({
+		field: "legalMonetaryTotal.taxExclusiveAmount",
+		code: "TAX_EXCLUSIVE_MISMATCH",
+		message: `Tax exclusive amount (${invoice.legalMonetaryTotal.taxExclusiveAmount}) doesn't match sum of line items (${expectedTaxExclusive})`,
+		severity: "error"
+	});
+	if (Math.abs(invoice.taxTotal.taxAmount - expectedTaxAmount) > tolerance) errors.push({
+		field: "taxTotal.taxAmount",
+		code: "TAX_AMOUNT_MISMATCH",
+		message: `Tax amount (${invoice.taxTotal.taxAmount}) doesn't match sum of line item taxes (${expectedTaxAmount})`,
+		severity: "error"
+	});
+	return errors;
+};
+/**
+* Main validation function for complete invoice
+*/
+const validateInvoice = (invoice) => {
+	const allErrors = [];
+	allErrors.push(...validateTIN(invoice.supplier.tin, invoice.supplier.registrationType));
+	allErrors.push(...validateTIN(invoice.buyer.tin, invoice.buyer.registrationType));
+	allErrors.push(...validateContactNumber(invoice.supplier.contactNumber));
+	allErrors.push(...validateContactNumber(invoice.buyer.contactNumber));
+	allErrors.push(...validateMonetaryAmount(invoice.legalMonetaryTotal.taxExclusiveAmount, "taxExclusiveAmount"));
+	allErrors.push(...validateMonetaryAmount(invoice.legalMonetaryTotal.payableAmount, "payableAmount"));
+	allErrors.push(...validateMonetaryAmount(invoice.taxTotal.taxAmount, "taxAmount"));
+	invoice.invoiceLineItems.forEach((item, index) => {
+		allErrors.push(...validateMonetaryAmount(item.unitPrice, `lineItem[${index}].unitPrice`));
+		allErrors.push(...validateMonetaryAmount(item.taxAmount, `lineItem[${index}].taxAmount`));
+		allErrors.push(...validateMonetaryAmount(item.totalTaxableAmountPerLine, `lineItem[${index}].totalTaxableAmountPerLine`));
+	});
+	allErrors.push(...validateTaxCalculations(invoice));
+	const errors = allErrors.filter((e) => e.severity === "error");
+	const warnings = allErrors.filter((e) => e.severity === "warning");
+	return {
+		isValid: errors.length === 0,
+		errors,
+		warnings
+	};
+};
 
 //#endregion
-exports.UnitTypeCodeEnum_8X = UnitTypeCodeEnum_8X;
+exports.validateContactNumber = validateContactNumber;
+exports.validateInvoice = validateInvoice;
+exports.validateLineItemTax = validateLineItemTax;
+exports.validateMonetaryAmount = validateMonetaryAmount;
+exports.validateTIN = validateTIN;
+exports.validateTaxCalculations = validateTaxCalculations;
 //# sourceMappingURL=index40.cjs.map

package/dist/index40.cjs.map

@@ -1 +1 @@
-{"version":3,"file":"index40.cjs","names":[],"sources":["../src/types/unit/8X.d.ts"],"sourcesContent":["/**\n * Unit type codes starting with '8'.\n */\nexport type UnitTypeCode_8X = '80' | '81' | '85' | '87' | '89'\n\n/**\n * Enum representing unit type codes starting with '8'.\n */\nexport enum UnitTypeCodeEnum_8X {\n  PoundPerSquareInchAbsolute = '80',\n  Henry = '81',\n  FootPoundForce = '85',\n  PoundPerCubicFoot = '87',\n  Poise = '89',\n}\n"],"mappings":";;;;;AAQA,IAAY,sEAAL;AACL;AACA;AACA;AACA;AACA;;AACD"}
+{"version":3,"file":"index40.cjs","names":["tin: string","registrationType?: string","errors: ValidationError[]","contactNumber: string","amount: number","fieldName: string","item: InvoiceLineItem","index: number","invoice: InvoiceV1_1","allErrors: ValidationError[]"],"sources":["../src/utils/validation.ts"],"sourcesContent":["import type { InvoiceV1_1, InvoiceLineItem } from '../types'\n\n/**\n * MyInvois Invoice Validation Utilities\n *\n * Provides comprehensive validation for invoice data before document generation\n * and submission to ensure compliance with MyInvois business rules and format requirements.\n */\n\nexport interface ValidationResult {\n  isValid: boolean\n  errors: ValidationError[]\n  warnings: ValidationWarning[]\n}\n\nexport interface ValidationError {\n  field: string\n  code: string\n  message: string\n  severity: 'error' | 'warning'\n}\n\nexport interface ValidationWarning extends ValidationError {\n  severity: 'warning'\n}\n\n/**\n * Validates TIN format based on registration type\n */\nexport const validateTIN = (\n  tin: string,\n  registrationType?: string,\n): ValidationError[] => {\n  const errors: ValidationError[] = []\n\n  if (!tin) {\n    errors.push({\n      field: 'tin',\n      code: 'TIN_REQUIRED',\n      message: 'TIN is required',\n      severity: 'error',\n    })\n    return errors\n  }\n\n  // TIN format validation based on type\n  if (registrationType === 'BRN' && !tin.startsWith('C')) {\n    errors.push({\n      field: 'tin',\n      code: 'TIN_FORMAT_INVALID',\n      message: 'Company TIN should start with \"C\" for BRN registration',\n      severity: 'warning',\n    })\n  }\n\n  if (registrationType === 'NRIC' && !tin.startsWith('IG')) {\n    errors.push({\n      field: 'tin',\n      code: 'TIN_FORMAT_INVALID',\n      message: 'Individual TIN should start with \"IG\" for NRIC registration',\n      severity: 'warning',\n    })\n  }\n\n  // Length validation\n  if (tin.length > 14) {\n    errors.push({\n      field: 'tin',\n      code: 'TIN_LENGTH_INVALID',\n      message: 'TIN cannot exceed 14 characters',\n      severity: 'error',\n    })\n  }\n\n  return errors\n}\n\n/**\n * Validates contact number format (E.164 standard)\n */\nexport const validateContactNumber = (\n  contactNumber: string,\n): ValidationError[] => {\n  const errors: ValidationError[] = []\n\n  if (!contactNumber || contactNumber === 'NA') {\n    return errors // Allow NA for consolidated e-invoices\n  }\n\n  // E.164 format validation\n  const e164Regex = /^\\+[1-9]\\d{1,14}$/\n  if (!e164Regex.test(contactNumber)) {\n    errors.push({\n      field: 'contactNumber',\n      code: 'CONTACT_FORMAT_INVALID',\n      message: 'Contact number must be in E.164 format (e.g., +60123456789)',\n      severity: 'error',\n    })\n  }\n\n  if (contactNumber.length < 8) {\n    errors.push({\n      field: 'contactNumber',\n      code: 'CONTACT_LENGTH_INVALID',\n      message: 'Contact number must be at least 8 characters',\n      severity: 'error',\n    })\n  }\n\n  return errors\n}\n\n/**\n * Validates monetary amounts\n */\nexport const validateMonetaryAmount = (\n  amount: number,\n  fieldName: string,\n  maxDigits = 18,\n  maxDecimals = 2,\n): ValidationError[] => {\n  const errors: ValidationError[] = []\n\n  if (amount < 0) {\n    errors.push({\n      field: fieldName,\n      code: 'AMOUNT_NEGATIVE',\n      message: `${fieldName} cannot be negative`,\n      severity: 'error',\n    })\n  }\n\n  // Check total digits\n  const amountStr = amount.toString()\n  const [integerPart, decimalPart] = amountStr.split('.')\n\n  if (integerPart && integerPart.length > maxDigits - maxDecimals) {\n    errors.push({\n      field: fieldName,\n      code: 'AMOUNT_DIGITS_EXCEEDED',\n      message: `${fieldName} exceeds maximum ${maxDigits} digits`,\n      severity: 'error',\n    })\n  }\n\n  if (decimalPart && decimalPart.length > maxDecimals) {\n    errors.push({\n      field: fieldName,\n      code: 'AMOUNT_DECIMALS_EXCEEDED',\n      message: `${fieldName} exceeds maximum ${maxDecimals} decimal places`,\n      severity: 'error',\n    })\n  }\n\n  return errors\n}\n\n/**\n * Validates line item tax calculation consistency for both fixed rate and percentage taxation\n */\nexport const validateLineItemTax = (\n  item: InvoiceLineItem,\n  index: number,\n): ValidationError[] => {\n  const errors: ValidationError[] = []\n  const tolerance = 0.01\n\n  // Check if tax calculation method is specified\n  const hasFixedRate =\n    item.taxPerUnitAmount !== undefined && item.baseUnitMeasure !== undefined\n  const hasPercentageRate = item.taxRate !== undefined\n\n  if (!hasFixedRate && !hasPercentageRate) {\n    errors.push({\n      field: `lineItem[${index}]`,\n      code: 'TAX_METHOD_MISSING',\n      message: `Line item ${index + 1} must specify either taxRate (for percentage) or taxPerUnitAmount + baseUnitMeasure (for fixed rate)`,\n      severity: 'error',\n    })\n    return errors\n  }\n\n  if (hasFixedRate && hasPercentageRate) {\n    errors.push({\n      field: `lineItem[${index}]`,\n      code: 'TAX_METHOD_CONFLICT',\n      message: `Line item ${index + 1} cannot have both percentage and fixed rate tax methods`,\n      severity: 'error',\n    })\n  }\n\n  // Validate fixed rate tax calculation\n  if (hasFixedRate) {\n    if (item.baseUnitMeasureCode === undefined) {\n      errors.push({\n        field: `lineItem[${index}].baseUnitMeasureCode`,\n        code: 'UNIT_CODE_MISSING',\n        message: `Line item ${index + 1} with fixed rate tax must specify baseUnitMeasureCode`,\n        severity: 'error',\n      })\n    }\n\n    const expectedTaxAmount = item.taxPerUnitAmount! * item.baseUnitMeasure!\n    if (Math.abs(item.taxAmount - expectedTaxAmount) > tolerance) {\n      errors.push({\n        field: `lineItem[${index}].taxAmount`,\n        code: 'FIXED_TAX_CALCULATION_MISMATCH',\n        message: `Line item ${index + 1} tax amount (${item.taxAmount}) doesn't match fixed rate calculation (${item.taxPerUnitAmount} × ${item.baseUnitMeasure} = ${expectedTaxAmount})`,\n        severity: 'error',\n      })\n    }\n  }\n\n  // Validate percentage tax calculation\n  if (hasPercentageRate && !hasFixedRate) {\n    const expectedTaxAmount =\n      (item.totalTaxableAmountPerLine * item.taxRate!) / 100\n    if (Math.abs(item.taxAmount - expectedTaxAmount) > tolerance) {\n      errors.push({\n        field: `lineItem[${index}].taxAmount`,\n        code: 'PERCENTAGE_TAX_CALCULATION_MISMATCH',\n        message: `Line item ${index + 1} tax amount (${item.taxAmount}) doesn't match percentage calculation (${item.totalTaxableAmountPerLine} × ${item.taxRate}% = ${expectedTaxAmount})`,\n        severity: 'error',\n      })\n    }\n  }\n\n  return errors\n}\n\n/**\n * Validates tax calculation consistency\n */\nexport const validateTaxCalculations = (\n  invoice: InvoiceV1_1,\n): ValidationError[] => {\n  const errors: ValidationError[] = []\n\n  // Validate individual line item tax calculations\n  invoice.invoiceLineItems.forEach((item, index) => {\n    errors.push(...validateLineItemTax(item, index))\n  })\n\n  // Calculate expected totals from line items\n  const expectedTaxExclusive = invoice.invoiceLineItems.reduce(\n    (sum, item) => sum + item.totalTaxableAmountPerLine,\n    0,\n  )\n  const expectedTaxAmount = invoice.invoiceLineItems.reduce(\n    (sum, item) => sum + item.taxAmount,\n    0,\n  )\n\n  // Allow small rounding differences (0.01)\n  const tolerance = 0.01\n\n  if (\n    Math.abs(\n      invoice.legalMonetaryTotal.taxExclusiveAmount - expectedTaxExclusive,\n    ) > tolerance\n  ) {\n    errors.push({\n      field: 'legalMonetaryTotal.taxExclusiveAmount',\n      code: 'TAX_EXCLUSIVE_MISMATCH',\n      message: `Tax exclusive amount (${invoice.legalMonetaryTotal.taxExclusiveAmount}) doesn't match sum of line items (${expectedTaxExclusive})`,\n      severity: 'error',\n    })\n  }\n\n  if (Math.abs(invoice.taxTotal.taxAmount - expectedTaxAmount) > tolerance) {\n    errors.push({\n      field: 'taxTotal.taxAmount',\n      code: 'TAX_AMOUNT_MISMATCH',\n      message: `Tax amount (${invoice.taxTotal.taxAmount}) doesn't match sum of line item taxes (${expectedTaxAmount})`,\n      severity: 'error',\n    })\n  }\n\n  return errors\n}\n\n/**\n * Main validation function for complete invoice\n */\nexport const validateInvoice = (invoice: InvoiceV1_1): ValidationResult => {\n  const allErrors: ValidationError[] = []\n\n  // Core field validations\n  allErrors.push(\n    ...validateTIN(invoice.supplier.tin, invoice.supplier.registrationType),\n  )\n  allErrors.push(\n    ...validateTIN(invoice.buyer.tin, invoice.buyer.registrationType),\n  )\n\n  allErrors.push(...validateContactNumber(invoice.supplier.contactNumber))\n  allErrors.push(...validateContactNumber(invoice.buyer.contactNumber))\n\n  // Monetary validations\n  allErrors.push(\n    ...validateMonetaryAmount(\n      invoice.legalMonetaryTotal.taxExclusiveAmount,\n      'taxExclusiveAmount',\n    ),\n  )\n  allErrors.push(\n    ...validateMonetaryAmount(\n      invoice.legalMonetaryTotal.payableAmount,\n      'payableAmount',\n    ),\n  )\n  allErrors.push(\n    ...validateMonetaryAmount(invoice.taxTotal.taxAmount, 'taxAmount'),\n  )\n\n  // Line item validations\n  invoice.invoiceLineItems.forEach((item, index) => {\n    allErrors.push(\n      ...validateMonetaryAmount(item.unitPrice, `lineItem[${index}].unitPrice`),\n    )\n    allErrors.push(\n      ...validateMonetaryAmount(item.taxAmount, `lineItem[${index}].taxAmount`),\n    )\n    allErrors.push(\n      ...validateMonetaryAmount(\n        item.totalTaxableAmountPerLine,\n        `lineItem[${index}].totalTaxableAmountPerLine`,\n      ),\n    )\n  })\n\n  // Business rule validations\n  allErrors.push(...validateTaxCalculations(invoice))\n\n  // Separate errors and warnings\n  const errors = allErrors.filter(e => e.severity === 'error')\n  const warnings = allErrors.filter(\n    e => e.severity === 'warning',\n  ) as ValidationWarning[]\n\n  return {\n    isValid: errors.length === 0,\n    errors,\n    warnings,\n  }\n}\n"],"mappings":";;;;;AA6BA,MAAa,cAAc,CACzBA,KACAC,qBACsB;CACtB,MAAMC,SAA4B,CAAE;AAEpC,MAAK,KAAK;AACR,SAAO,KAAK;GACV,OAAO;GACP,MAAM;GACN,SAAS;GACT,UAAU;EACX,EAAC;AACF,SAAO;CACR;AAGD,KAAI,qBAAqB,UAAU,IAAI,WAAW,IAAI,CACpD,QAAO,KAAK;EACV,OAAO;EACP,MAAM;EACN,SAAS;EACT,UAAU;CACX,EAAC;AAGJ,KAAI,qBAAqB,WAAW,IAAI,WAAW,KAAK,CACtD,QAAO,KAAK;EACV,OAAO;EACP,MAAM;EACN,SAAS;EACT,UAAU;CACX,EAAC;AAIJ,KAAI,IAAI,SAAS,GACf,QAAO,KAAK;EACV,OAAO;EACP,MAAM;EACN,SAAS;EACT,UAAU;CACX,EAAC;AAGJ,QAAO;AACR;;;;AAKD,MAAa,wBAAwB,CACnCC,kBACsB;CACtB,MAAMD,SAA4B,CAAE;AAEpC,MAAK,iBAAiB,kBAAkB,KACtC,QAAO;CAIT,MAAM,YAAY;AAClB,MAAK,UAAU,KAAK,cAAc,CAChC,QAAO,KAAK;EACV,OAAO;EACP,MAAM;EACN,SAAS;EACT,UAAU;CACX,EAAC;AAGJ,KAAI,cAAc,SAAS,EACzB,QAAO,KAAK;EACV,OAAO;EACP,MAAM;EACN,SAAS;EACT,UAAU;CACX,EAAC;AAGJ,QAAO;AACR;;;;AAKD,MAAa,yBAAyB,CACpCE,QACAC,WACA,YAAY,IACZ,cAAc,MACQ;CACtB,MAAMH,SAA4B,CAAE;AAEpC,KAAI,SAAS,EACX,QAAO,KAAK;EACV,OAAO;EACP,MAAM;EACN,UAAU,EAAE,UAAU;EACtB,UAAU;CACX,EAAC;CAIJ,MAAM,YAAY,OAAO,UAAU;CACnC,MAAM,CAAC,aAAa,YAAY,GAAG,UAAU,MAAM,IAAI;AAEvD,KAAI,eAAe,YAAY,SAAS,YAAY,YAClD,QAAO,KAAK;EACV,OAAO;EACP,MAAM;EACN,UAAU,EAAE,UAAU,mBAAmB,UAAU;EACnD,UAAU;CACX,EAAC;AAGJ,KAAI,eAAe,YAAY,SAAS,YACtC,QAAO,KAAK;EACV,OAAO;EACP,MAAM;EACN,UAAU,EAAE,UAAU,mBAAmB,YAAY;EACrD,UAAU;CACX,EAAC;AAGJ,QAAO;AACR;;;;AAKD,MAAa,sBAAsB,CACjCI,MACAC,UACsB;CACtB,MAAML,SAA4B,CAAE;CACpC,MAAM,YAAY;CAGlB,MAAM,eACJ,KAAK,+BAAkC,KAAK;CAC9C,MAAM,oBAAoB,KAAK;AAE/B,MAAK,iBAAiB,mBAAmB;AACvC,SAAO,KAAK;GACV,QAAQ,WAAW,MAAM;GACzB,MAAM;GACN,UAAU,YAAY,QAAQ,EAAE;GAChC,UAAU;EACX,EAAC;AACF,SAAO;CACR;AAED,KAAI,gBAAgB,kBAClB,QAAO,KAAK;EACV,QAAQ,WAAW,MAAM;EACzB,MAAM;EACN,UAAU,YAAY,QAAQ,EAAE;EAChC,UAAU;CACX,EAAC;AAIJ,KAAI,cAAc;AAChB,MAAI,KAAK,+BACP,QAAO,KAAK;GACV,QAAQ,WAAW,MAAM;GACzB,MAAM;GACN,UAAU,YAAY,QAAQ,EAAE;GAChC,UAAU;EACX,EAAC;EAGJ,MAAM,oBAAoB,KAAK,mBAAoB,KAAK;AACxD,MAAI,KAAK,IAAI,KAAK,YAAY,kBAAkB,GAAG,UACjD,QAAO,KAAK;GACV,QAAQ,WAAW,MAAM;GACzB,MAAM;GACN,UAAU,YAAY,QAAQ,EAAE,eAAe,KAAK,UAAU,0CAA0C,KAAK,iBAAiB,KAAK,KAAK,gBAAgB,KAAK,kBAAkB;GAC/K,UAAU;EACX,EAAC;CAEL;AAGD,KAAI,sBAAsB,cAAc;EACtC,MAAM,oBACH,KAAK,4BAA4B,KAAK,UAAY;AACrD,MAAI,KAAK,IAAI,KAAK,YAAY,kBAAkB,GAAG,UACjD,QAAO,KAAK;GACV,QAAQ,WAAW,MAAM;GACzB,MAAM;GACN,UAAU,YAAY,QAAQ,EAAE,eAAe,KAAK,UAAU,0CAA0C,KAAK,0BAA0B,KAAK,KAAK,QAAQ,MAAM,kBAAkB;GACjL,UAAU;EACX,EAAC;CAEL;AAED,QAAO;AACR;;;;AAKD,MAAa,0BAA0B,CACrCM,YACsB;CACtB,MAAMN,SAA4B,CAAE;AAGpC,SAAQ,iBAAiB,QAAQ,CAAC,MAAM,UAAU;AAChD,SAAO,KAAK,GAAG,oBAAoB,MAAM,MAAM,CAAC;CACjD,EAAC;CAGF,MAAM,uBAAuB,QAAQ,iBAAiB,OACpD,CAAC,KAAK,SAAS,MAAM,KAAK,2BAC1B,EACD;CACD,MAAM,oBAAoB,QAAQ,iBAAiB,OACjD,CAAC,KAAK,SAAS,MAAM,KAAK,WAC1B,EACD;CAGD,MAAM,YAAY;AAElB,KACE,KAAK,IACH,QAAQ,mBAAmB,qBAAqB,qBACjD,GAAG,UAEJ,QAAO,KAAK;EACV,OAAO;EACP,MAAM;EACN,UAAU,wBAAwB,QAAQ,mBAAmB,mBAAmB,qCAAqC,qBAAqB;EAC1I,UAAU;CACX,EAAC;AAGJ,KAAI,KAAK,IAAI,QAAQ,SAAS,YAAY,kBAAkB,GAAG,UAC7D,QAAO,KAAK;EACV,OAAO;EACP,MAAM;EACN,UAAU,cAAc,QAAQ,SAAS,UAAU,0CAA0C,kBAAkB;EAC/G,UAAU;CACX,EAAC;AAGJ,QAAO;AACR;;;;AAKD,MAAa,kBAAkB,CAACM,YAA2C;CACzE,MAAMC,YAA+B,CAAE;AAGvC,WAAU,KACR,GAAG,YAAY,QAAQ,SAAS,KAAK,QAAQ,SAAS,iBAAiB,CACxE;AACD,WAAU,KACR,GAAG,YAAY,QAAQ,MAAM,KAAK,QAAQ,MAAM,iBAAiB,CAClE;AAED,WAAU,KAAK,GAAG,sBAAsB,QAAQ,SAAS,cAAc,CAAC;AACxE,WAAU,KAAK,GAAG,sBAAsB,QAAQ,MAAM,cAAc,CAAC;AAGrE,WAAU,KACR,GAAG,uBACD,QAAQ,mBAAmB,oBAC3B,qBACD,CACF;AACD,WAAU,KACR,GAAG,uBACD,QAAQ,mBAAmB,eAC3B,gBACD,CACF;AACD,WAAU,KACR,GAAG,uBAAuB,QAAQ,SAAS,WAAW,YAAY,CACnE;AAGD,SAAQ,iBAAiB,QAAQ,CAAC,MAAM,UAAU;AAChD,YAAU,KACR,GAAG,uBAAuB,KAAK,YAAY,WAAW,MAAM,aAAa,CAC1E;AACD,YAAU,KACR,GAAG,uBAAuB,KAAK,YAAY,WAAW,MAAM,aAAa,CAC1E;AACD,YAAU,KACR,GAAG,uBACD,KAAK,4BACJ,WAAW,MAAM,6BACnB,CACF;CACF,EAAC;AAGF,WAAU,KAAK,GAAG,wBAAwB,QAAQ,CAAC;CAGnD,MAAM,SAAS,UAAU,OAAO,OAAK,EAAE,aAAa,QAAQ;CAC5D,MAAM,WAAW,UAAU,OACzB,OAAK,EAAE,aAAa,UACrB;AAED,QAAO;EACL,SAAS,OAAO,WAAW;EAC3B;EACA;CACD;AACF"}

package/dist/index41.cjs

@@ -1,13 +1,18 @@
 
-//#region src/types/unit/9X.d.ts
+//#region src/types/unit/1X.d.ts
 /**
-* Enum representing unit type codes starting with '9'.
+* Enum representing unit type codes starting with '1'.
 */
-let UnitTypeCodeEnum_9X = /* @__PURE__ */ function(UnitTypeCodeEnum_9X$1) {
-	UnitTypeCodeEnum_9X$1["Stokes"] = "91";
-	return UnitTypeCodeEnum_9X$1;
+let UnitTypeCodeEnum_1X = /* @__PURE__ */ function(UnitTypeCodeEnum_1X$1) {
+	UnitTypeCodeEnum_1X$1["Group"] = "10";
+	UnitTypeCodeEnum_1X$1["Outfit"] = "11";
+	UnitTypeCodeEnum_1X$1["Ration"] = "13";
+	UnitTypeCodeEnum_1X$1["Shot"] = "14";
+	UnitTypeCodeEnum_1X$1["StickMilitary"] = "15";
+	UnitTypeCodeEnum_1X$1["FixedRate"] = "1I";
+	return UnitTypeCodeEnum_1X$1;
 }({});
 
 //#endregion
-exports.UnitTypeCodeEnum_9X = UnitTypeCodeEnum_9X;
+exports.UnitTypeCodeEnum_1X = UnitTypeCodeEnum_1X;
 //# sourceMappingURL=index41.cjs.map

package/dist/index41.cjs.map

@@ -1 +1 @@
-{"version":3,"file":"index41.cjs","names":[],"sources":["../src/types/unit/9X.d.ts"],"sourcesContent":["/**\n * Unit type codes starting with '9'.\n */\nexport type UnitTypeCode_9X = '91'\n\n/**\n * Enum representing unit type codes starting with '9'.\n */\nexport enum UnitTypeCodeEnum_9X {\n  Stokes = '91',\n}\n"],"mappings":";;;;;AAQA,IAAY,sEAAL;AACL;;AACD"}
+{"version":3,"file":"index41.cjs","names":[],"sources":["../src/types/unit/1X.d.ts"],"sourcesContent":["/**\n * Unit type codes starting with '1'.\n */\nexport type UnitTypeCode_1X = '10' | '11' | '13' | '14' | '15' | '1I'\n\n/**\n * Enum representing unit type codes starting with '1'.\n */\nexport enum UnitTypeCodeEnum_1X {\n  Group = '10',\n  Outfit = '11',\n  Ration = '13',\n  Shot = '14',\n  StickMilitary = '15',\n  FixedRate = '1I',\n}\n"],"mappings":";;;;;AAQA,IAAY,sEAAL;AACL;AACA;AACA;AACA;AACA;AACA;;AACD"}

package/dist/index42.cjs

@@ -1,108 +1,38 @@
 
-//#region src/types/unit/AX.d.ts
+//#region src/types/unit/2X.d.ts
 /**
-* Enum representing unit type codes starting with 'A'.
+* Enum representing unit type codes starting with '2'.
 */
-let UnitTypeCodeEnum_AX = /* @__PURE__ */ function(UnitTypeCodeEnum_AX$1) {
-	UnitTypeCodeEnum_AX$1["AmpereSquareMetrePerJouleSecond"] = "A10";
-	UnitTypeCodeEnum_AX$1["Angstrom"] = "A11";
-	UnitTypeCodeEnum_AX$1["AstronomicalUnit"] = "A12";
-	UnitTypeCodeEnum_AX$1["Attojoule"] = "A13";
-	UnitTypeCodeEnum_AX$1["Barn"] = "A14";
-	UnitTypeCodeEnum_AX$1["BarnPerElectronvolt"] = "A15";
-	UnitTypeCodeEnum_AX$1["BarnPerSteradianElectronvolt"] = "A16";
-	UnitTypeCodeEnum_AX$1["BarnPerSteradian"] = "A17";
-	UnitTypeCodeEnum_AX$1["BecquerelPerKilogram"] = "A18";
-	UnitTypeCodeEnum_AX$1["BecquerelPerCubicMetre"] = "A19";
-	UnitTypeCodeEnum_AX$1["AmperePerCentimetre"] = "A2";
-	UnitTypeCodeEnum_AX$1["BritishThermalUnitInternationalTablePerSecondSquareFootDegreeRankine"] = "A20";
-	UnitTypeCodeEnum_AX$1["BritishThermalUnitInternationalTablePerPoundDegreeRankine"] = "A21";
-	UnitTypeCodeEnum_AX$1["BritishThermalUnitInternationalTablePerSecondFootDegreeRankine"] = "A22";
-	UnitTypeCodeEnum_AX$1["BritishThermalUnitInternationalTablePerHourSquareFootDegreeRankine"] = "A23";
-	UnitTypeCodeEnum_AX$1["CandelaPerSquareMetre"] = "A24";
-	UnitTypeCodeEnum_AX$1["CoulombMetre"] = "A26";
-	UnitTypeCodeEnum_AX$1["CoulombMetreSquaredPerVolt"] = "A27";
-	UnitTypeCodeEnum_AX$1["CoulombPerCubicCentimetre"] = "A28";
-	UnitTypeCodeEnum_AX$1["CoulombPerCubicMetre"] = "A29";
-	UnitTypeCodeEnum_AX$1["AmperePerMillimetre"] = "A3";
-	UnitTypeCodeEnum_AX$1["CoulombPerCubicMillimetre"] = "A30";
-	UnitTypeCodeEnum_AX$1["CoulombPerKilogramSecond"] = "A31";
-	UnitTypeCodeEnum_AX$1["CoulombPerMole"] = "A32";
-	UnitTypeCodeEnum_AX$1["CoulombPerSquareCentimetre"] = "A33";
-	UnitTypeCodeEnum_AX$1["CoulombPerSquareMetre"] = "A34";
-	UnitTypeCodeEnum_AX$1["CoulombPerSquareMillimetre"] = "A35";
-	UnitTypeCodeEnum_AX$1["CubicCentimetrePerMole"] = "A36";
-	UnitTypeCodeEnum_AX$1["CubicDecimetrePerMole"] = "A37";
-	UnitTypeCodeEnum_AX$1["CubicMetrePerCoulomb"] = "A38";
-	UnitTypeCodeEnum_AX$1["CubicMetrePerKilogram"] = "A39";
-	UnitTypeCodeEnum_AX$1["AmperePerSquareCentimetre"] = "A4";
-	UnitTypeCodeEnum_AX$1["CubicMetrePerMole"] = "A40";
-	UnitTypeCodeEnum_AX$1["AmperePerSquareMetre"] = "A41";
-	UnitTypeCodeEnum_AX$1["CuriePerKilogram"] = "A42";
-	UnitTypeCodeEnum_AX$1["DeadweightTonnage"] = "A43";
-	UnitTypeCodeEnum_AX$1["Decalitre"] = "A44";
-	UnitTypeCodeEnum_AX$1["Decametre"] = "A45";
-	UnitTypeCodeEnum_AX$1["Decitex"] = "A47";
-	UnitTypeCodeEnum_AX$1["DegreeRankine"] = "A48";
-	UnitTypeCodeEnum_AX$1["Denier"] = "A49";
-	UnitTypeCodeEnum_AX$1["AmpereSquareMetre"] = "A5";
-	UnitTypeCodeEnum_AX$1["Electronvolt"] = "A53";
-	UnitTypeCodeEnum_AX$1["ElectronvoltPerMetre"] = "A54";
-	UnitTypeCodeEnum_AX$1["ElectronvoltSquareMetre"] = "A55";
-	UnitTypeCodeEnum_AX$1["ElectronvoltSquareMetrePerKilogram"] = "A56";
-	UnitTypeCodeEnum_AX$1["_8PartCloudCover"] = "A59";
-	UnitTypeCodeEnum_AX$1["AmperePerSquareMetreKelvinSquared"] = "A6";
-	UnitTypeCodeEnum_AX$1["Exajoule"] = "A68";
-	UnitTypeCodeEnum_AX$1["FaradPerMetre"] = "A69";
-	UnitTypeCodeEnum_AX$1["AmperePerSquareMillimetre"] = "A7";
-	UnitTypeCodeEnum_AX$1["Femtojoule"] = "A70";
-	UnitTypeCodeEnum_AX$1["Femtometre"] = "A71";
-	UnitTypeCodeEnum_AX$1["FootPerSecondSquared"] = "A73";
-	UnitTypeCodeEnum_AX$1["FootPoundForcePerSecond"] = "A74";
-	UnitTypeCodeEnum_AX$1["FreightTon"] = "A75";
-	UnitTypeCodeEnum_AX$1["Gal"] = "A76";
-	UnitTypeCodeEnum_AX$1["AmpereSecond"] = "A8";
-	UnitTypeCodeEnum_AX$1["GigacoulombPerCubicMetre"] = "A84";
-	UnitTypeCodeEnum_AX$1["Gigaelectronvolt"] = "A85";
-	UnitTypeCodeEnum_AX$1["Gigahertz"] = "A86";
-	UnitTypeCodeEnum_AX$1["Gigaohm"] = "A87";
-	UnitTypeCodeEnum_AX$1["GigaohmMetre"] = "A88";
-	UnitTypeCodeEnum_AX$1["Gigapascal"] = "A89";
-	UnitTypeCodeEnum_AX$1["Rate"] = "A9";
-	UnitTypeCodeEnum_AX$1["Gigawatt"] = "A90";
-	UnitTypeCodeEnum_AX$1["Gon"] = "A91";
-	UnitTypeCodeEnum_AX$1["GramPerCubicMetre"] = "A93";
-	UnitTypeCodeEnum_AX$1["GramPerMole"] = "A94";
-	UnitTypeCodeEnum_AX$1["Gray"] = "A95";
-	UnitTypeCodeEnum_AX$1["GrayPerSecond"] = "A96";
-	UnitTypeCodeEnum_AX$1["Hectopascal"] = "A97";
-	UnitTypeCodeEnum_AX$1["HenryPerMetre"] = "A98";
-	UnitTypeCodeEnum_AX$1["Bit"] = "A99";
-	UnitTypeCodeEnum_AX$1["Ball"] = "AA";
-	UnitTypeCodeEnum_AX$1["BulkPack"] = "AB";
-	UnitTypeCodeEnum_AX$1["Acre"] = "ACR";
-	UnitTypeCodeEnum_AX$1["Activity"] = "ACT";
-	UnitTypeCodeEnum_AX$1["Byte"] = "AD";
-	UnitTypeCodeEnum_AX$1["AmperePerMetre"] = "AE";
-	UnitTypeCodeEnum_AX$1["AdditionalMinute"] = "AH";
-	UnitTypeCodeEnum_AX$1["AverageMinutePerCall"] = "AI";
-	UnitTypeCodeEnum_AX$1["Fathom"] = "AK";
-	UnitTypeCodeEnum_AX$1["AccessLine"] = "AL";
-	UnitTypeCodeEnum_AX$1["AmpereHour"] = "AMH";
-	UnitTypeCodeEnum_AX$1["Ampere"] = "AMP";
-	UnitTypeCodeEnum_AX$1["Year"] = "ANN";
-	UnitTypeCodeEnum_AX$1["TroyOunceOrApothecaryOunce"] = "APZ";
-	UnitTypeCodeEnum_AX$1["AntiHemophilicFactorAHFUnit"] = "AQ";
-	UnitTypeCodeEnum_AX$1["Assortment"] = "AS";
-	UnitTypeCodeEnum_AX$1["AlcoholicStrengthByMass"] = "ASM";
-	UnitTypeCodeEnum_AX$1["AlcoholicStrengthByVolume"] = "ASU";
-	UnitTypeCodeEnum_AX$1["StandardAtmosphere"] = "ATM";
-	UnitTypeCodeEnum_AX$1["AmericanWireGauge"] = "AWG";
-	UnitTypeCodeEnum_AX$1["Assembly"] = "AY";
-	UnitTypeCodeEnum_AX$1["BritishThermalUnitInternationalTablePerPound"] = "AZ";
-	return UnitTypeCodeEnum_AX$1;
+let UnitTypeCodeEnum_2X = /* @__PURE__ */ function(UnitTypeCodeEnum_2X$1) {
+	UnitTypeCodeEnum_2X$1["TwentyFootContainer"] = "20";
+	UnitTypeCodeEnum_2X$1["FortyFootContainer"] = "21";
+	UnitTypeCodeEnum_2X$1["DecilitrePerGram"] = "22";
+	UnitTypeCodeEnum_2X$1["GramPerCubicCentimetre"] = "23";
+	UnitTypeCodeEnum_2X$1["TheoreticalPound"] = "24";
+	UnitTypeCodeEnum_2X$1["GramPerSquareCentimetre"] = "25";
+	UnitTypeCodeEnum_2X$1["TheoreticalTon"] = "27";
+	UnitTypeCodeEnum_2X$1["KilogramPerSquareMetre"] = "28";
+	UnitTypeCodeEnum_2X$1["RadianPerSecond"] = "2A";
+	UnitTypeCodeEnum_2X$1["RadianPerSecondSquared"] = "2B";
+	UnitTypeCodeEnum_2X$1["Roentgen"] = "2C";
+	UnitTypeCodeEnum_2X$1["VoltAC"] = "2G";
+	UnitTypeCodeEnum_2X$1["VoltDC"] = "2H";
+	UnitTypeCodeEnum_2X$1["BritishThermalUnitInternationalTablePerHour"] = "2I";
+	UnitTypeCodeEnum_2X$1["CubicCentimetrePerSecond"] = "2J";
+	UnitTypeCodeEnum_2X$1["CubicFootPerHour"] = "2K";
+	UnitTypeCodeEnum_2X$1["CubicFootPerMinute"] = "2L";
+	UnitTypeCodeEnum_2X$1["CentimetrePerSecond"] = "2M";
+	UnitTypeCodeEnum_2X$1["Decibel"] = "2N";
+	UnitTypeCodeEnum_2X$1["Kilobyte"] = "2P";
+	UnitTypeCodeEnum_2X$1["Kilobecquerel"] = "2Q";
+	UnitTypeCodeEnum_2X$1["Kilocurie"] = "2R";
+	UnitTypeCodeEnum_2X$1["Megagram"] = "2U";
+	UnitTypeCodeEnum_2X$1["MetrePerMinute"] = "2X";
+	UnitTypeCodeEnum_2X$1["Milliroentgen"] = "2Y";
+	UnitTypeCodeEnum_2X$1["Millivolt"] = "2Z";
+	return UnitTypeCodeEnum_2X$1;
 }({});
 
 //#endregion
-exports.UnitTypeCodeEnum_AX = UnitTypeCodeEnum_AX;
+exports.UnitTypeCodeEnum_2X = UnitTypeCodeEnum_2X;
 //# sourceMappingURL=index42.cjs.map

package/dist/index42.cjs.map

@@ -1 +1 @@
-{"version":3,"file":"index42.cjs","names":[],"sources":["../src/types/unit/AX.d.ts"],"sourcesContent":["/**\n * Unit type codes starting with 'A'.\n */\nexport type UnitTypeCode_AX =\n  | 'A10'\n  | 'A11'\n  | 'A12'\n  | 'A13'\n  | 'A14'\n  | 'A15'\n  | 'A16'\n  | 'A17'\n  | 'A18'\n  | 'A19'\n  | 'A2'\n  | 'A20'\n  | 'A21'\n  | 'A22'\n  | 'A23'\n  | 'A24'\n  | 'A26'\n  | 'A27'\n  | 'A28'\n  | 'A29'\n  | 'A3'\n  | 'A30'\n  | 'A31'\n  | 'A32'\n  | 'A33'\n  | 'A34'\n  | 'A35'\n  | 'A36'\n  | 'A37'\n  | 'A38'\n  | 'A39'\n  | 'A4'\n  | 'A40'\n  | 'A41'\n  | 'A42'\n  | 'A43'\n  | 'A44'\n  | 'A45'\n  | 'A47'\n  | 'A48'\n  | 'A49'\n  | 'A5'\n  | 'A53'\n  | 'A54'\n  | 'A55'\n  | 'A56'\n  | 'A59'\n  | 'A6'\n  | 'A68'\n  | 'A69'\n  | 'A7'\n  | 'A70'\n  | 'A71'\n  | 'A73'\n  | 'A74'\n  | 'A75'\n  | 'A76'\n  | 'A8'\n  | 'A84'\n  | 'A85'\n  | 'A86'\n  | 'A87'\n  | 'A88'\n  | 'A89'\n  | 'A9'\n  | 'A90'\n  | 'A91'\n  | 'A93'\n  | 'A94'\n  | 'A95'\n  | 'A96'\n  | 'A97'\n  | 'A98'\n  | 'A99'\n  | 'AA'\n  | 'AB'\n  | 'ACR'\n  | 'ACT'\n  | 'AD'\n  | 'AE'\n  | 'AH'\n  | 'AI'\n  | 'AK'\n  | 'AL'\n  | 'AMH'\n  | 'AMP'\n  | 'ANN'\n  | 'APZ'\n  | 'AQ'\n  | 'AS'\n  | 'ASM'\n  | 'ASU'\n  | 'ATM'\n  | 'AWG'\n  | 'AY'\n  | 'AZ'\n\n/**\n * Enum representing unit type codes starting with 'A'.\n */\nexport enum UnitTypeCodeEnum_AX {\n  AmpereSquareMetrePerJouleSecond = 'A10',\n  Angstrom = 'A11',\n  AstronomicalUnit = 'A12',\n  Attojoule = 'A13',\n  Barn = 'A14',\n  BarnPerElectronvolt = 'A15',\n  BarnPerSteradianElectronvolt = 'A16',\n  BarnPerSteradian = 'A17',\n  BecquerelPerKilogram = 'A18',\n  BecquerelPerCubicMetre = 'A19',\n  AmperePerCentimetre = 'A2',\n  BritishThermalUnitInternationalTablePerSecondSquareFootDegreeRankine = 'A20',\n  BritishThermalUnitInternationalTablePerPoundDegreeRankine = 'A21',\n  BritishThermalUnitInternationalTablePerSecondFootDegreeRankine = 'A22',\n  BritishThermalUnitInternationalTablePerHourSquareFootDegreeRankine = 'A23',\n  CandelaPerSquareMetre = 'A24',\n  CoulombMetre = 'A26',\n  CoulombMetreSquaredPerVolt = 'A27',\n  CoulombPerCubicCentimetre = 'A28',\n  CoulombPerCubicMetre = 'A29',\n  AmperePerMillimetre = 'A3',\n  CoulombPerCubicMillimetre = 'A30',\n  CoulombPerKilogramSecond = 'A31',\n  CoulombPerMole = 'A32',\n  CoulombPerSquareCentimetre = 'A33',\n  CoulombPerSquareMetre = 'A34',\n  CoulombPerSquareMillimetre = 'A35',\n  CubicCentimetrePerMole = 'A36',\n  CubicDecimetrePerMole = 'A37',\n  CubicMetrePerCoulomb = 'A38',\n  CubicMetrePerKilogram = 'A39',\n  AmperePerSquareCentimetre = 'A4',\n  CubicMetrePerMole = 'A40',\n  AmperePerSquareMetre = 'A41',\n  CuriePerKilogram = 'A42',\n  DeadweightTonnage = 'A43',\n  Decalitre = 'A44',\n  Decametre = 'A45',\n  Decitex = 'A47',\n  DegreeRankine = 'A48',\n  Denier = 'A49',\n  AmpereSquareMetre = 'A5',\n  Electronvolt = 'A53',\n  ElectronvoltPerMetre = 'A54',\n  ElectronvoltSquareMetre = 'A55',\n  ElectronvoltSquareMetrePerKilogram = 'A56',\n  _8PartCloudCover = 'A59', // Enum member names cannot start with a number\n  AmperePerSquareMetreKelvinSquared = 'A6',\n  Exajoule = 'A68',\n  FaradPerMetre = 'A69',\n  AmperePerSquareMillimetre = 'A7',\n  Femtojoule = 'A70',\n  Femtometre = 'A71',\n  FootPerSecondSquared = 'A73',\n  FootPoundForcePerSecond = 'A74',\n  FreightTon = 'A75',\n  Gal = 'A76',\n  AmpereSecond = 'A8',\n  GigacoulombPerCubicMetre = 'A84',\n  Gigaelectronvolt = 'A85',\n  Gigahertz = 'A86',\n  Gigaohm = 'A87',\n  GigaohmMetre = 'A88',\n  Gigapascal = 'A89',\n  Rate = 'A9',\n  Gigawatt = 'A90',\n  Gon = 'A91',\n  GramPerCubicMetre = 'A93',\n  GramPerMole = 'A94',\n  Gray = 'A95',\n  GrayPerSecond = 'A96',\n  Hectopascal = 'A97',\n  HenryPerMetre = 'A98',\n  Bit = 'A99',\n  Ball = 'AA',\n  BulkPack = 'AB',\n  Acre = 'ACR',\n  Activity = 'ACT',\n  Byte = 'AD',\n  AmperePerMetre = 'AE',\n  AdditionalMinute = 'AH',\n  AverageMinutePerCall = 'AI',\n  Fathom = 'AK',\n  AccessLine = 'AL',\n  AmpereHour = 'AMH',\n  Ampere = 'AMP',\n  Year = 'ANN',\n  TroyOunceOrApothecaryOunce = 'APZ',\n  AntiHemophilicFactorAHFUnit = 'AQ',\n  Assortment = 'AS',\n  AlcoholicStrengthByMass = 'ASM',\n  AlcoholicStrengthByVolume = 'ASU',\n  StandardAtmosphere = 'ATM',\n  AmericanWireGauge = 'AWG',\n  Assembly = 'AY',\n  BritishThermalUnitInternationalTablePerPound = 'AZ',\n}\n"],"mappings":";;;;;AAwGA,IAAY,sEAAL;AACL;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;;AACD"}
+{"version":3,"file":"index42.cjs","names":[],"sources":["../src/types/unit/2X.d.ts"],"sourcesContent":["/**\n * Unit type codes starting with '2'.\n */\nexport type UnitTypeCode_2X =\n  | '20'\n  | '21'\n  | '22'\n  | '23'\n  | '24'\n  | '25'\n  | '27'\n  | '28'\n  | '2A'\n  | '2B'\n  | '2C'\n  | '2G'\n  | '2H'\n  | '2I'\n  | '2J'\n  | '2K'\n  | '2L'\n  | '2M'\n  | '2N'\n  | '2P'\n  | '2Q'\n  | '2R'\n  | '2U'\n  | '2X'\n  | '2Y'\n  | '2Z'\n\n/**\n * Enum representing unit type codes starting with '2'.\n */\nexport enum UnitTypeCodeEnum_2X {\n  TwentyFootContainer = '20',\n  FortyFootContainer = '21',\n  DecilitrePerGram = '22',\n  GramPerCubicCentimetre = '23',\n  TheoreticalPound = '24',\n  GramPerSquareCentimetre = '25',\n  TheoreticalTon = '27',\n  KilogramPerSquareMetre = '28',\n  RadianPerSecond = '2A',\n  RadianPerSecondSquared = '2B',\n  Roentgen = '2C',\n  VoltAC = '2G',\n  VoltDC = '2H',\n  BritishThermalUnitInternationalTablePerHour = '2I',\n  CubicCentimetrePerSecond = '2J',\n  CubicFootPerHour = '2K',\n  CubicFootPerMinute = '2L',\n  CentimetrePerSecond = '2M',\n  Decibel = '2N',\n  Kilobyte = '2P',\n  Kilobecquerel = '2Q',\n  Kilocurie = '2R',\n  Megagram = '2U',\n  MetrePerMinute = '2X',\n  Milliroentgen = '2Y',\n  Millivolt = '2Z',\n}\n"],"mappings":";;;;;AAkCA,IAAY,sEAAL;AACL;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;;AACD"}

package/dist/index43.cjs

@@ -1,113 +1,19 @@
 
-//#region src/types/unit/BX.d.ts
+//#region src/types/unit/3X.d.ts
 /**
-* Enum representing unit type codes starting with 'B'.
+* Enum representing unit type codes starting with '3'.
 */
-let UnitTypeCodeEnum_BX = /* @__PURE__ */ function(UnitTypeCodeEnum_BX$1) {
-	UnitTypeCodeEnum_BX$1["BarrelUSPerDay"] = "B1";
-	UnitTypeCodeEnum_BX$1["BitPerSecond"] = "B10";
-	UnitTypeCodeEnum_BX$1["JoulePerKilogramKelvin"] = "B11";
-	UnitTypeCodeEnum_BX$1["JoulePerMetre"] = "B12";
-	UnitTypeCodeEnum_BX$1["JoulePerSquareMetre"] = "B13";
-	UnitTypeCodeEnum_BX$1["JoulePerMetreToTheFourthPower"] = "B14";
-	UnitTypeCodeEnum_BX$1["JoulePerMole"] = "B15";
-	UnitTypeCodeEnum_BX$1["JoulePerMoleKelvin"] = "B16";
-	UnitTypeCodeEnum_BX$1["Credit"] = "B17";
-	UnitTypeCodeEnum_BX$1["JouleSecond"] = "B18";
-	UnitTypeCodeEnum_BX$1["Digit"] = "B19";
-	UnitTypeCodeEnum_BX$1["JouleSquareMetrePerKilogram"] = "B20";
-	UnitTypeCodeEnum_BX$1["KelvinPerWatt"] = "B21";
-	UnitTypeCodeEnum_BX$1["Kiloampere"] = "B22";
-	UnitTypeCodeEnum_BX$1["KiloamperePerSquareMetre"] = "B23";
-	UnitTypeCodeEnum_BX$1["KiloamperePerMetre"] = "B24";
-	UnitTypeCodeEnum_BX$1["KilobecquerelPerKilogram"] = "B25";
-	UnitTypeCodeEnum_BX$1["Kilocoulomb"] = "B26";
-	UnitTypeCodeEnum_BX$1["KilocoulombPerCubicMetre"] = "B27";
-	UnitTypeCodeEnum_BX$1["KilocoulombPerSquareMetre"] = "B28";
-	UnitTypeCodeEnum_BX$1["Kiloelectronvolt"] = "B29";
-	UnitTypeCodeEnum_BX$1["BattingPound"] = "B3";
-	UnitTypeCodeEnum_BX$1["Gibibit"] = "B30";
-	UnitTypeCodeEnum_BX$1["KilogramMetrePerSecond"] = "B31";
-	UnitTypeCodeEnum_BX$1["KilogramMetreSquared"] = "B32";
-	UnitTypeCodeEnum_BX$1["KilogramMetreSquaredPerSecond"] = "B33";
-	UnitTypeCodeEnum_BX$1["KilogramPerCubicDecimetre"] = "B34";
-	UnitTypeCodeEnum_BX$1["KilogramPerLitre"] = "B35";
-	UnitTypeCodeEnum_BX$1["BarrelImperial"] = "B4";
-	UnitTypeCodeEnum_BX$1["KilojoulePerKelvin"] = "B41";
-	UnitTypeCodeEnum_BX$1["KilojoulePerKilogram"] = "B42";
-	UnitTypeCodeEnum_BX$1["KilojoulePerKilogramKelvin"] = "B43";
-	UnitTypeCodeEnum_BX$1["KilojoulePerMole"] = "B44";
-	UnitTypeCodeEnum_BX$1["Kilomole"] = "B45";
-	UnitTypeCodeEnum_BX$1["KilomolePerCubicMetre"] = "B46";
-	UnitTypeCodeEnum_BX$1["Kilonewton"] = "B47";
-	UnitTypeCodeEnum_BX$1["KilonewtonMetre"] = "B48";
-	UnitTypeCodeEnum_BX$1["Kiloohm"] = "B49";
-	UnitTypeCodeEnum_BX$1["KiloohmMetre"] = "B50";
-	UnitTypeCodeEnum_BX$1["Kilosecond"] = "B52";
-	UnitTypeCodeEnum_BX$1["Kilosiemens"] = "B53";
-	UnitTypeCodeEnum_BX$1["KilosiemensPerMetre"] = "B54";
-	UnitTypeCodeEnum_BX$1["KilovoltPerMetre"] = "B55";
-	UnitTypeCodeEnum_BX$1["KiloweberPerMetre"] = "B56";
-	UnitTypeCodeEnum_BX$1["LightYear"] = "B57";
-	UnitTypeCodeEnum_BX$1["LitrePerMole"] = "B58";
-	UnitTypeCodeEnum_BX$1["LumenHour"] = "B59";
-	UnitTypeCodeEnum_BX$1["LumenPerSquareMetre"] = "B60";
-	UnitTypeCodeEnum_BX$1["LumenPerWatt"] = "B61";
-	UnitTypeCodeEnum_BX$1["LumenSecond"] = "B62";
-	UnitTypeCodeEnum_BX$1["LuxHour"] = "B63";
-	UnitTypeCodeEnum_BX$1["LuxSecond"] = "B64";
-	UnitTypeCodeEnum_BX$1["MegaamperePerSquareMetre"] = "B66";
-	UnitTypeCodeEnum_BX$1["MegabecquerelPerKilogram"] = "B67";
-	UnitTypeCodeEnum_BX$1["Gigabit"] = "B68";
-	UnitTypeCodeEnum_BX$1["MegacoulombPerCubicMetre"] = "B69";
-	UnitTypeCodeEnum_BX$1["Cycle"] = "B7";
-	UnitTypeCodeEnum_BX$1["MegacoulombPerSquareMetre"] = "B70";
-	UnitTypeCodeEnum_BX$1["Megaelectronvolt"] = "B71";
-	UnitTypeCodeEnum_BX$1["MegagramPerCubicMetre"] = "B72";
-	UnitTypeCodeEnum_BX$1["Meganewton"] = "B73";
-	UnitTypeCodeEnum_BX$1["MeganewtonMetre"] = "B74";
-	UnitTypeCodeEnum_BX$1["Megaohm"] = "B75";
-	UnitTypeCodeEnum_BX$1["MegaohmMetre"] = "B76";
-	UnitTypeCodeEnum_BX$1["MegasiemensPerMetre"] = "B77";
-	UnitTypeCodeEnum_BX$1["Megavolt"] = "B78";
-	UnitTypeCodeEnum_BX$1["MegavoltPerMetre"] = "B79";
-	UnitTypeCodeEnum_BX$1["JoulePerCubicMetre"] = "B8";
-	UnitTypeCodeEnum_BX$1["GigabitPerSecond"] = "B80";
-	UnitTypeCodeEnum_BX$1["ReciprocalMetreSquaredReciprocalSecond"] = "B81";
-	UnitTypeCodeEnum_BX$1["InchPerLinearFoot"] = "B82";
-	UnitTypeCodeEnum_BX$1["MetreToTheFourthPower"] = "B83";
-	UnitTypeCodeEnum_BX$1["Microampere"] = "B84";
-	UnitTypeCodeEnum_BX$1["Microbar"] = "B85";
-	UnitTypeCodeEnum_BX$1["Microcoulomb"] = "B86";
-	UnitTypeCodeEnum_BX$1["MicrocoulombPerCubicMetre"] = "B87";
-	UnitTypeCodeEnum_BX$1["MicrocoulombPerSquareMetre"] = "B88";
-	UnitTypeCodeEnum_BX$1["MicrofaradPerMetre"] = "B89";
-	UnitTypeCodeEnum_BX$1["Microhenry"] = "B90";
-	UnitTypeCodeEnum_BX$1["MicrohenryPerMetre"] = "B91";
-	UnitTypeCodeEnum_BX$1["Micronewton"] = "B92";
-	UnitTypeCodeEnum_BX$1["MicronewtonMetre"] = "B93";
-	UnitTypeCodeEnum_BX$1["Microohm"] = "B94";
-	UnitTypeCodeEnum_BX$1["MicroohmMetre"] = "B95";
-	UnitTypeCodeEnum_BX$1["Micropascal"] = "B96";
-	UnitTypeCodeEnum_BX$1["Microradian"] = "B97";
-	UnitTypeCodeEnum_BX$1["Microsecond"] = "B98";
-	UnitTypeCodeEnum_BX$1["Microsiemens"] = "B99";
-	UnitTypeCodeEnum_BX$1["Bar"] = "BAR";
-	UnitTypeCodeEnum_BX$1["BaseBox"] = "BB";
-	UnitTypeCodeEnum_BX$1["BoardFoot"] = "BFT";
-	UnitTypeCodeEnum_BX$1["BrakeHorsePower"] = "BHP";
-	UnitTypeCodeEnum_BX$1["BillionEUR"] = "BIL";
-	UnitTypeCodeEnum_BX$1["DryBarrelUS"] = "BLD";
-	UnitTypeCodeEnum_BX$1["BarrelUS"] = "BLL";
-	UnitTypeCodeEnum_BX$1["HundredBoardFoot"] = "BP";
-	UnitTypeCodeEnum_BX$1["BeatsPerMinute"] = "BPM";
-	UnitTypeCodeEnum_BX$1["Becquerel"] = "BQL";
-	UnitTypeCodeEnum_BX$1["BritishThermalUnit"] = "BTU";
-	UnitTypeCodeEnum_BX$1["BushelUS"] = "BUA";
-	UnitTypeCodeEnum_BX$1["BushelUK"] = "BUI";
-	return UnitTypeCodeEnum_BX$1;
+let UnitTypeCodeEnum_3X = /* @__PURE__ */ function(UnitTypeCodeEnum_3X$1) {
+	UnitTypeCodeEnum_3X$1["KilopascalSquareMetrePerGram"] = "33";
+	UnitTypeCodeEnum_3X$1["KilopascalPerMillimetre"] = "34";
+	UnitTypeCodeEnum_3X$1["MillilitrePerSquareCentimetreSecond"] = "35";
+	UnitTypeCodeEnum_3X$1["OuncePerSquareFoot"] = "37";
+	UnitTypeCodeEnum_3X$1["OuncePerSquareFootPer0_01inch"] = "38";
+	UnitTypeCodeEnum_3X$1["Megajoule"] = "3B";
+	UnitTypeCodeEnum_3X$1["Manmonth"] = "3C";
+	return UnitTypeCodeEnum_3X$1;
 }({});
 
 //#endregion
-exports.UnitTypeCodeEnum_BX = UnitTypeCodeEnum_BX;
+exports.UnitTypeCodeEnum_3X = UnitTypeCodeEnum_3X;
 //# sourceMappingURL=index43.cjs.map

package/dist/index43.cjs.map

@@ -1 +1 @@
-{"version":3,"file":"index43.cjs","names":[],"sources":["../src/types/unit/BX.d.ts"],"sourcesContent":["/**\n * Unit type codes starting with 'B'.\n */\nexport type UnitTypeCode_BX =\n  | 'B1'\n  | 'B10'\n  | 'B11'\n  | 'B12'\n  | 'B13'\n  | 'B14'\n  | 'B15'\n  | 'B16'\n  | 'B17'\n  | 'B18'\n  | 'B19'\n  | 'B20'\n  | 'B21'\n  | 'B22'\n  | 'B23'\n  | 'B24'\n  | 'B25'\n  | 'B26'\n  | 'B27'\n  | 'B28'\n  | 'B29'\n  | 'B3'\n  | 'B30'\n  | 'B31'\n  | 'B32'\n  | 'B33'\n  | 'B34'\n  | 'B35'\n  | 'B4'\n  | 'B41'\n  | 'B42'\n  | 'B43'\n  | 'B44'\n  | 'B45'\n  | 'B46'\n  | 'B47'\n  | 'B48'\n  | 'B49'\n  | 'B50'\n  | 'B52'\n  | 'B53'\n  | 'B54'\n  | 'B55'\n  | 'B56'\n  | 'B57'\n  | 'B58'\n  | 'B59'\n  | 'B60'\n  | 'B61'\n  | 'B62'\n  | 'B63'\n  | 'B64'\n  | 'B66'\n  | 'B67'\n  | 'B68'\n  | 'B69'\n  | 'B7'\n  | 'B70'\n  | 'B71'\n  | 'B72'\n  | 'B73'\n  | 'B74'\n  | 'B75'\n  | 'B76'\n  | 'B77'\n  | 'B78'\n  | 'B79'\n  | 'B8'\n  | 'B80'\n  | 'B81'\n  | 'B82'\n  | 'B83'\n  | 'B84'\n  | 'B85'\n  | 'B86'\n  | 'B87'\n  | 'B88'\n  | 'B89'\n  | 'B90'\n  | 'B91'\n  | 'B92'\n  | 'B93'\n  | 'B94'\n  | 'B95'\n  | 'B96'\n  | 'B97'\n  | 'B98'\n  | 'B99'\n  | 'BAR'\n  | 'BB'\n  | 'BFT'\n  | 'BHP'\n  | 'BIL'\n  | 'BLD'\n  | 'BLL'\n  | 'BP'\n  | 'BPM'\n  | 'BQL'\n  | 'BTU'\n  | 'BUA'\n  | 'BUI'\n\n/**\n * Enum representing unit type codes starting with 'B'.\n */\nexport enum UnitTypeCodeEnum_BX {\n  BarrelUSPerDay = 'B1',\n  BitPerSecond = 'B10',\n  JoulePerKilogramKelvin = 'B11',\n  JoulePerMetre = 'B12',\n  JoulePerSquareMetre = 'B13',\n  JoulePerMetreToTheFourthPower = 'B14',\n  JoulePerMole = 'B15',\n  JoulePerMoleKelvin = 'B16',\n  Credit = 'B17',\n  JouleSecond = 'B18',\n  Digit = 'B19',\n  JouleSquareMetrePerKilogram = 'B20',\n  KelvinPerWatt = 'B21',\n  Kiloampere = 'B22',\n  KiloamperePerSquareMetre = 'B23',\n  KiloamperePerMetre = 'B24',\n  KilobecquerelPerKilogram = 'B25',\n  Kilocoulomb = 'B26',\n  KilocoulombPerCubicMetre = 'B27',\n  KilocoulombPerSquareMetre = 'B28',\n  Kiloelectronvolt = 'B29',\n  BattingPound = 'B3',\n  Gibibit = 'B30',\n  KilogramMetrePerSecond = 'B31',\n  KilogramMetreSquared = 'B32',\n  KilogramMetreSquaredPerSecond = 'B33',\n  KilogramPerCubicDecimetre = 'B34',\n  KilogramPerLitre = 'B35',\n  BarrelImperial = 'B4',\n  KilojoulePerKelvin = 'B41',\n  KilojoulePerKilogram = 'B42',\n  KilojoulePerKilogramKelvin = 'B43',\n  KilojoulePerMole = 'B44',\n  Kilomole = 'B45',\n  KilomolePerCubicMetre = 'B46',\n  Kilonewton = 'B47',\n  KilonewtonMetre = 'B48',\n  Kiloohm = 'B49',\n  KiloohmMetre = 'B50',\n  Kilosecond = 'B52',\n  Kilosiemens = 'B53',\n  KilosiemensPerMetre = 'B54',\n  KilovoltPerMetre = 'B55',\n  KiloweberPerMetre = 'B56',\n  LightYear = 'B57',\n  LitrePerMole = 'B58',\n  LumenHour = 'B59',\n  LumenPerSquareMetre = 'B60',\n  LumenPerWatt = 'B61',\n  LumenSecond = 'B62',\n  LuxHour = 'B63',\n  LuxSecond = 'B64',\n  MegaamperePerSquareMetre = 'B66',\n  MegabecquerelPerKilogram = 'B67',\n  Gigabit = 'B68',\n  MegacoulombPerCubicMetre = 'B69',\n  Cycle = 'B7',\n  MegacoulombPerSquareMetre = 'B70',\n  Megaelectronvolt = 'B71',\n  MegagramPerCubicMetre = 'B72',\n  Meganewton = 'B73',\n  MeganewtonMetre = 'B74',\n  Megaohm = 'B75',\n  MegaohmMetre = 'B76',\n  MegasiemensPerMetre = 'B77',\n  Megavolt = 'B78',\n  MegavoltPerMetre = 'B79',\n  JoulePerCubicMetre = 'B8',\n  GigabitPerSecond = 'B80',\n  ReciprocalMetreSquaredReciprocalSecond = 'B81',\n  InchPerLinearFoot = 'B82',\n  MetreToTheFourthPower = 'B83',\n  Microampere = 'B84',\n  Microbar = 'B85',\n  Microcoulomb = 'B86',\n  MicrocoulombPerCubicMetre = 'B87',\n  MicrocoulombPerSquareMetre = 'B88',\n  MicrofaradPerMetre = 'B89',\n  Microhenry = 'B90',\n  MicrohenryPerMetre = 'B91',\n  Micronewton = 'B92',\n  MicronewtonMetre = 'B93',\n  Microohm = 'B94',\n  MicroohmMetre = 'B95',\n  Micropascal = 'B96',\n  Microradian = 'B97',\n  Microsecond = 'B98',\n  Microsiemens = 'B99',\n  Bar = 'BAR',\n  BaseBox = 'BB',\n  BoardFoot = 'BFT',\n  BrakeHorsePower = 'BHP',\n  BillionEUR = 'BIL',\n  DryBarrelUS = 'BLD',\n  BarrelUS = 'BLL',\n  HundredBoardFoot = 'BP',\n  BeatsPerMinute = 'BPM',\n  Becquerel = 'BQL',\n  BritishThermalUnit = 'BTU',\n  BushelUS = 'BUA',\n  BushelUK = 'BUI',\n}\n"],"mappings":";;;;;AA6GA,IAAY,s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}
+{"version":3,"file":"index43.cjs","names":[],"sources":["../src/types/unit/3X.d.ts"],"sourcesContent":["/**\n * Unit type codes starting with '3'.\n */\nexport type UnitTypeCode_3X = '33' | '34' | '35' | '37' | '38' | '3B' | '3C'\n\n/**\n * Enum representing unit type codes starting with '3'.\n */\nexport enum UnitTypeCodeEnum_3X {\n  KilopascalSquareMetrePerGram = '33',\n  KilopascalPerMillimetre = '34',\n  MillilitrePerSquareCentimetreSecond = '35',\n  OuncePerSquareFoot = '37',\n  OuncePerSquareFootPer0_01inch = '38',\n  Megajoule = '3B',\n  Manmonth = '3C',\n}\n"],"mappings":";;;;;AAQA,IAAY,sEAAL;AACL;AACA;AACA;AACA;AACA;AACA;AACA;;AACD"}