@rio-cloud/cdk-v2-constructs 7.13.10 → 7.13.12-alpha.0

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/DeleteExpressGatewayServiceCommand.d.ts

@@ -27,14 +27,7 @@ declare const DeleteExpressGatewayServiceCommand_base: {
     getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
 };
 /**
- * <p>Deletes an Express service and removes all associated Amazon Web Services resources. This operation
- * 			stops service tasks, removes the Application Load Balancer, target groups, security groups,
- * 			auto-scaling policies, and other managed infrastructure components.</p>
- *          <p>The service enters a <code>DRAINING</code> state where existing tasks complete current
- * 			requests without starting new tasks. After all tasks stop, the service and infrastructure
- * 			are permanently removed.</p>
- *          <p>This operation cannot be reversed. Back up important data and verify the service is no
- * 			longer needed before deletion.</p>
+ * <p>Deletes an Express service and removes all associated Amazon Web Services resources. This operation stops service tasks, removes the Application Load Balancer, target groups, security groups, auto-scaling policies, and other managed infrastructure components.</p> <p>The service enters a <code>DRAINING</code> state where existing tasks complete current requests without starting new tasks. After all tasks stop, the service and infrastructure are permanently removed.</p> <p>This operation cannot be reversed. Back up important data and verify the service is no longer needed before deletion.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -139,29 +132,22 @@ declare const DeleteExpressGatewayServiceCommand_base: {
  *  <p>You don't have authorization to perform the requested action.</p>
  *
  * @throws {@link ClientException} (client fault)
- *  <p>These errors are usually caused by a client action. This client action might be using
- * 			an action or resource on behalf of a user that doesn't have permissions to use the
- * 			action or resource. Or, it might be specifying an identifier that isn't valid.</p>
+ *  <p>These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.</p>
  *
  * @throws {@link ClusterNotFoundException} (client fault)
  *  <p>The specified cluster wasn't found. You can view your available clusters with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListClusters.html">ListClusters</a>. Amazon ECS clusters are Region specific.</p>
  *
  * @throws {@link InvalidParameterException} (client fault)
- *  <p>The specified parameter isn't valid. Review the available parameters for the API
- * 			request.</p>
- *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS
- * 				service event messages</a>. </p>
+ *  <p>The specified parameter isn't valid. Review the available parameters for the API request.</p> <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service event messages</a>. </p>
  *
  * @throws {@link ServerException} (server fault)
  *  <p>These errors are usually caused by a server issue.</p>
  *
  * @throws {@link ServiceNotActiveException} (client fault)
- *  <p>The specified service isn't active. You can't update a service that's inactive. If you
- * 			have previously deleted a service, you can re-create it with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_CreateService.html">CreateService</a>.</p>
+ *  <p>The specified service isn't active. You can't update a service that's inactive. If you have previously deleted a service, you can re-create it with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_CreateService.html">CreateService</a>.</p>
  *
  * @throws {@link ServiceNotFoundException} (client fault)
- *  <p>The specified service wasn't found. You can view your available services with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListServices.html">ListServices</a>. Amazon ECS services are cluster specific and Region
- * 			specific.</p>
+ *  <p>The specified service wasn't found. You can view your available services with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListServices.html">ListServices</a>. Amazon ECS services are cluster specific and Region specific.</p>
  *
  * @throws {@link UnsupportedFeatureException} (client fault)
  *  <p>The specified task isn't supported in this Region.</p>

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/DeleteServiceCommand.d.ts

@@ -27,27 +27,7 @@ declare const DeleteServiceCommand_base: {
     getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
 };
 /**
- * <p>Deletes a specified service within a cluster. You can delete a service if you have no
- * 			running tasks in it and the desired task count is zero. If the service is actively
- * 			maintaining tasks, you can't delete it, and you must update the service to a desired
- * 			task count of zero. For more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_UpdateService.html">UpdateService</a>.</p>
- *          <note>
- *             <p>When you delete a service, if there are still running tasks that require cleanup,
- * 				the service status moves from <code>ACTIVE</code> to <code>DRAINING</code>, and the
- * 				service is no longer visible in the console or in the <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListServices.html">ListServices</a>
- * 				API operation. After all tasks have transitioned to either <code>STOPPING</code> or
- * 					<code>STOPPED</code> status, the service status moves from <code>DRAINING</code>
- * 				to <code>INACTIVE</code>. Services in the <code>DRAINING</code> or
- * 					<code>INACTIVE</code> status can still be viewed with the <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_DescribeServices.html">DescribeServices</a> API operation. However, in the future,
- * 					<code>INACTIVE</code> services may be cleaned up and purged from Amazon ECS
- * 				record keeping, and <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_DescribeServices.html">DescribeServices</a> calls on those services return a
- * 					<code>ServiceNotFoundException</code> error.</p>
- *          </note>
- *          <important>
- *             <p>If you attempt to create a new service with the same name as an existing service
- * 				in either <code>ACTIVE</code> or <code>DRAINING</code> status, you receive an
- * 				error.</p>
- *          </important>
+ * <p>Deletes a specified service within a cluster. You can delete a service if you have no running tasks in it and the desired task count is zero. If the service is actively maintaining tasks, you can't delete it, and you must update the service to a desired task count of zero. For more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_UpdateService.html">UpdateService</a>.</p> <note> <p>When you delete a service, if there are still running tasks that require cleanup, the service status moves from <code>ACTIVE</code> to <code>DRAINING</code>, and the service is no longer visible in the console or in the <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListServices.html">ListServices</a> API operation. After all tasks have transitioned to either <code>STOPPING</code> or <code>STOPPED</code> status, the service status moves from <code>DRAINING</code> to <code>INACTIVE</code>. Services in the <code>DRAINING</code> or <code>INACTIVE</code> status can still be viewed with the <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_DescribeServices.html">DescribeServices</a> API operation. However, in the future, <code>INACTIVE</code> services may be cleaned up and purged from Amazon ECS record keeping, and <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_DescribeServices.html">DescribeServices</a> calls on those services return a <code>ServiceNotFoundException</code> error.</p> </note> <important> <p>If you attempt to create a new service with the same name as an existing service in either <code>ACTIVE</code> or <code>DRAINING</code> status, you receive an error.</p> </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -409,25 +389,19 @@ declare const DeleteServiceCommand_base: {
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
  *
  * @throws {@link ClientException} (client fault)
- *  <p>These errors are usually caused by a client action. This client action might be using
- * 			an action or resource on behalf of a user that doesn't have permissions to use the
- * 			action or resource. Or, it might be specifying an identifier that isn't valid.</p>
+ *  <p>These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.</p>
  *
  * @throws {@link ClusterNotFoundException} (client fault)
  *  <p>The specified cluster wasn't found. You can view your available clusters with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListClusters.html">ListClusters</a>. Amazon ECS clusters are Region specific.</p>
  *
  * @throws {@link InvalidParameterException} (client fault)
- *  <p>The specified parameter isn't valid. Review the available parameters for the API
- * 			request.</p>
- *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS
- * 				service event messages</a>. </p>
+ *  <p>The specified parameter isn't valid. Review the available parameters for the API request.</p> <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service event messages</a>. </p>
  *
  * @throws {@link ServerException} (server fault)
  *  <p>These errors are usually caused by a server issue.</p>
  *
  * @throws {@link ServiceNotFoundException} (client fault)
- *  <p>The specified service wasn't found. You can view your available services with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListServices.html">ListServices</a>. Amazon ECS services are cluster specific and Region
- * 			specific.</p>
+ *  <p>The specified service wasn't found. You can view your available services with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListServices.html">ListServices</a>. Amazon ECS services are cluster specific and Region specific.</p>
  *
  * @throws {@link ECSServiceException}
  * <p>Base exception class for all service exceptions from ECS service.</p>

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/DeleteTaskDefinitionsCommand.d.ts

@@ -27,26 +27,7 @@ declare const DeleteTaskDefinitionsCommand_base: {
     getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
 };
 /**
- * <p>Deletes one or more task definitions.</p>
- *          <p>You must deregister a task definition revision before you delete it. For more
- * 			information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_DeregisterTaskDefinition.html">DeregisterTaskDefinition</a>.</p>
- *          <p>When you delete a task definition revision, it is immediately transitions from the
- * 				<code>INACTIVE</code> to <code>DELETE_IN_PROGRESS</code>. Existing tasks and
- * 			services that reference a <code>DELETE_IN_PROGRESS</code> task definition revision
- * 			continue to run without disruption. Existing services that reference a
- * 				<code>DELETE_IN_PROGRESS</code> task definition revision can still scale up or down
- * 			by modifying the service's desired count.</p>
- *          <p>You can't use a <code>DELETE_IN_PROGRESS</code> task definition revision to run new
- * 			tasks or create new services. You also can't update an existing service to reference a
- * 				<code>DELETE_IN_PROGRESS</code> task definition revision.</p>
- *          <p> A task definition revision will stay in <code>DELETE_IN_PROGRESS</code> status until
- * 			all the associated tasks and services have been terminated.</p>
- *          <p>When you delete all <code>INACTIVE</code> task definition revisions, the task
- * 			definition name is not displayed in the console and not returned in the API. If a task
- * 			definition revisions are in the <code>DELETE_IN_PROGRESS</code> state, the task
- * 			definition name is displayed in the console and returned in the API. The task definition
- * 			name is retained by Amazon ECS and the revision is incremented the next time you create
- * 			a task definition with that name.</p>
+ * <p>Deletes one or more task definitions.</p> <p>You must deregister a task definition revision before you delete it. For more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_DeregisterTaskDefinition.html">DeregisterTaskDefinition</a>.</p> <p>When you delete a task definition revision, it is immediately transitions from the <code>INACTIVE</code> to <code>DELETE_IN_PROGRESS</code>. Existing tasks and services that reference a <code>DELETE_IN_PROGRESS</code> task definition revision continue to run without disruption. Existing services that reference a <code>DELETE_IN_PROGRESS</code> task definition revision can still scale up or down by modifying the service's desired count.</p> <p>You can't use a <code>DELETE_IN_PROGRESS</code> task definition revision to run new tasks or create new services. You also can't update an existing service to reference a <code>DELETE_IN_PROGRESS</code> task definition revision.</p> <p> A task definition revision will stay in <code>DELETE_IN_PROGRESS</code> status until all the associated tasks and services have been terminated.</p> <p>When you delete all <code>INACTIVE</code> task definition revisions, the task definition name is not displayed in the console and not returned in the API. If a task definition revisions are in the <code>DELETE_IN_PROGRESS</code> state, the task definition name is displayed in the console and returned in the API. The task definition name is retained by Amazon ECS and the revision is incremented the next time you create a task definition with that name.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -358,15 +339,10 @@ declare const DeleteTaskDefinitionsCommand_base: {
  *  <p>You don't have authorization to perform the requested action.</p>
  *
  * @throws {@link ClientException} (client fault)
- *  <p>These errors are usually caused by a client action. This client action might be using
- * 			an action or resource on behalf of a user that doesn't have permissions to use the
- * 			action or resource. Or, it might be specifying an identifier that isn't valid.</p>
+ *  <p>These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.</p>
  *
  * @throws {@link InvalidParameterException} (client fault)
- *  <p>The specified parameter isn't valid. Review the available parameters for the API
- * 			request.</p>
- *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS
- * 				service event messages</a>. </p>
+ *  <p>The specified parameter isn't valid. Review the available parameters for the API request.</p> <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service event messages</a>. </p>
  *
  * @throws {@link ServerException} (server fault)
  *  <p>These errors are usually caused by a server issue.</p>

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/DeleteTaskSetCommand.d.ts

@@ -27,9 +27,7 @@ declare const DeleteTaskSetCommand_base: {
     getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
 };
 /**
- * <p>Deletes a specified task set within a service. This is used when a service uses the
- * 				<code>EXTERNAL</code> deployment controller type. For more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/deployment-types.html">Amazon ECS deployment types</a> in the <i>Amazon Elastic Container
- * 				Service Developer Guide</i>.</p>
+ * <p>Deletes a specified task set within a service. This is used when a service uses the <code>EXTERNAL</code> deployment controller type. For more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/deployment-types.html">Amazon ECS deployment types</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -134,33 +132,25 @@ declare const DeleteTaskSetCommand_base: {
  *  <p>You don't have authorization to perform the requested action.</p>
  *
  * @throws {@link ClientException} (client fault)
- *  <p>These errors are usually caused by a client action. This client action might be using
- * 			an action or resource on behalf of a user that doesn't have permissions to use the
- * 			action or resource. Or, it might be specifying an identifier that isn't valid.</p>
+ *  <p>These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.</p>
  *
  * @throws {@link ClusterNotFoundException} (client fault)
  *  <p>The specified cluster wasn't found. You can view your available clusters with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListClusters.html">ListClusters</a>. Amazon ECS clusters are Region specific.</p>
  *
  * @throws {@link InvalidParameterException} (client fault)
- *  <p>The specified parameter isn't valid. Review the available parameters for the API
- * 			request.</p>
- *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS
- * 				service event messages</a>. </p>
+ *  <p>The specified parameter isn't valid. Review the available parameters for the API request.</p> <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service event messages</a>. </p>
  *
  * @throws {@link ServerException} (server fault)
  *  <p>These errors are usually caused by a server issue.</p>
  *
  * @throws {@link ServiceNotActiveException} (client fault)
- *  <p>The specified service isn't active. You can't update a service that's inactive. If you
- * 			have previously deleted a service, you can re-create it with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_CreateService.html">CreateService</a>.</p>
+ *  <p>The specified service isn't active. You can't update a service that's inactive. If you have previously deleted a service, you can re-create it with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_CreateService.html">CreateService</a>.</p>
  *
  * @throws {@link ServiceNotFoundException} (client fault)
- *  <p>The specified service wasn't found. You can view your available services with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListServices.html">ListServices</a>. Amazon ECS services are cluster specific and Region
- * 			specific.</p>
+ *  <p>The specified service wasn't found. You can view your available services with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListServices.html">ListServices</a>. Amazon ECS services are cluster specific and Region specific.</p>
  *
  * @throws {@link TaskSetNotFoundException} (client fault)
- *  <p>The specified task set wasn't found. You can view your available task sets with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_DescribeTaskSets.html">DescribeTaskSets</a>. Task sets are specific to each cluster, service and
- * 			Region.</p>
+ *  <p>The specified task set wasn't found. You can view your available task sets with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_DescribeTaskSets.html">DescribeTaskSets</a>. Task sets are specific to each cluster, service and Region.</p>
  *
  * @throws {@link UnsupportedFeatureException} (client fault)
  *  <p>The specified task isn't supported in this Region.</p>

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/DeregisterContainerInstanceCommand.d.ts

@@ -27,20 +27,7 @@ declare const DeregisterContainerInstanceCommand_base: {
     getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
 };
 /**
- * <p>Deregisters an Amazon ECS container instance from the specified cluster. This instance
- * 			is no longer available to run tasks.</p>
- *          <p>If you intend to use the container instance for some other purpose after
- * 			deregistration, we recommend that you stop all of the tasks running on the container
- * 			instance before deregistration. That prevents any orphaned tasks from consuming
- * 			resources.</p>
- *          <p>Deregistering a container instance removes the instance from a cluster, but it doesn't
- * 			terminate the EC2 instance. If you are finished using the instance, be sure to terminate
- * 			it in the Amazon EC2 console to stop billing.</p>
- *          <note>
- *             <p>If you terminate a running container instance, Amazon ECS automatically
- * 				deregisters the instance from your cluster (stopped container instances or instances
- * 				with disconnected agents aren't automatically deregistered when terminated).</p>
- *          </note>
+ * <p>Deregisters an Amazon ECS container instance from the specified cluster. This instance is no longer available to run tasks.</p> <p>If you intend to use the container instance for some other purpose after deregistration, we recommend that you stop all of the tasks running on the container instance before deregistration. That prevents any orphaned tasks from consuming resources.</p> <p>Deregistering a container instance removes the instance from a cluster, but it doesn't terminate the EC2 instance. If you are finished using the instance, be sure to terminate it in the Amazon EC2 console to stop billing.</p> <note> <p>If you terminate a running container instance, Amazon ECS automatically deregisters the instance from your cluster (stopped container instances or instances with disconnected agents aren't automatically deregistered when terminated).</p> </note>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -148,18 +135,13 @@ declare const DeregisterContainerInstanceCommand_base: {
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
  *
  * @throws {@link ClientException} (client fault)
- *  <p>These errors are usually caused by a client action. This client action might be using
- * 			an action or resource on behalf of a user that doesn't have permissions to use the
- * 			action or resource. Or, it might be specifying an identifier that isn't valid.</p>
+ *  <p>These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.</p>
  *
  * @throws {@link ClusterNotFoundException} (client fault)
  *  <p>The specified cluster wasn't found. You can view your available clusters with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListClusters.html">ListClusters</a>. Amazon ECS clusters are Region specific.</p>
  *
  * @throws {@link InvalidParameterException} (client fault)
- *  <p>The specified parameter isn't valid. Review the available parameters for the API
- * 			request.</p>
- *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS
- * 				service event messages</a>. </p>
+ *  <p>The specified parameter isn't valid. Review the available parameters for the API request.</p> <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service event messages</a>. </p>
  *
  * @throws {@link ServerException} (server fault)
  *  <p>These errors are usually caused by a server issue.</p>

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/DeregisterTaskDefinitionCommand.d.ts

@@ -27,24 +27,7 @@ declare const DeregisterTaskDefinitionCommand_base: {
     getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
 };
 /**
- * <p>Deregisters the specified task definition by family and revision. Upon deregistration,
- * 			the task definition is marked as <code>INACTIVE</code>. Existing tasks and services that
- * 			reference an <code>INACTIVE</code> task definition continue to run without disruption.
- * 			Existing services that reference an <code>INACTIVE</code> task definition can still
- * 			scale up or down by modifying the service's desired count. If you want to delete a task
- * 			definition revision, you must first deregister the task definition revision.</p>
- *          <p>You can't use an <code>INACTIVE</code> task definition to run new tasks or create new
- * 			services, and you can't update an existing service to reference an <code>INACTIVE</code>
- * 			task definition. However, there may be up to a 10-minute window following deregistration
- * 			where these restrictions have not yet taken effect.</p>
- *          <note>
- *             <p>At this time, <code>INACTIVE</code> task definitions remain discoverable in your
- * 				account indefinitely. However, this behavior is subject to change in the future. We
- * 				don't recommend that you rely on <code>INACTIVE</code> task definitions persisting
- * 				beyond the lifecycle of any associated tasks and services.</p>
- *          </note>
- *          <p>You must deregister a task definition revision before you delete it. For more
- * 			information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_DeleteTaskDefinitions.html">DeleteTaskDefinitions</a>.</p>
+ * <p>Deregisters the specified task definition by family and revision. Upon deregistration, the task definition is marked as <code>INACTIVE</code>. Existing tasks and services that reference an <code>INACTIVE</code> task definition continue to run without disruption. Existing services that reference an <code>INACTIVE</code> task definition can still scale up or down by modifying the service's desired count. If you want to delete a task definition revision, you must first deregister the task definition revision.</p> <p>You can't use an <code>INACTIVE</code> task definition to run new tasks or create new services, and you can't update an existing service to reference an <code>INACTIVE</code> task definition. However, there may be up to a 10-minute window following deregistration where these restrictions have not yet taken effect.</p> <note> <p>At this time, <code>INACTIVE</code> task definitions remain discoverable in your account indefinitely. However, this behavior is subject to change in the future. We don't recommend that you rely on <code>INACTIVE</code> task definitions persisting beyond the lifecycle of any associated tasks and services.</p> </note> <p>You must deregister a task definition revision before you delete it. For more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_DeleteTaskDefinitions.html">DeleteTaskDefinitions</a>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -342,15 +325,10 @@ declare const DeregisterTaskDefinitionCommand_base: {
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
  *
  * @throws {@link ClientException} (client fault)
- *  <p>These errors are usually caused by a client action. This client action might be using
- * 			an action or resource on behalf of a user that doesn't have permissions to use the
- * 			action or resource. Or, it might be specifying an identifier that isn't valid.</p>
+ *  <p>These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.</p>
  *
  * @throws {@link InvalidParameterException} (client fault)
- *  <p>The specified parameter isn't valid. Review the available parameters for the API
- * 			request.</p>
- *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS
- * 				service event messages</a>. </p>
+ *  <p>The specified parameter isn't valid. Review the available parameters for the API request.</p> <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service event messages</a>. </p>
  *
  * @throws {@link ServerException} (server fault)
  *  <p>These errors are usually caused by a server issue.</p>

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/DescribeCapacityProvidersCommand.d.ts

@@ -84,7 +84,7 @@ declare const DescribeCapacityProvidersCommand_base: {
  * //             storageSizeGiB: Number("int"),
  * //           },
  * //           monitoring: "BASIC" || "DETAILED",
- * //           capacityOptionType: "ON_DEMAND" || "SPOT",
+ * //           capacityOptionType: "ON_DEMAND" || "SPOT" || "RESERVED",
  * //           instanceRequirements: { // InstanceRequirementsRequest
  * //             vCpuCount: { // VCpuCountRangeRequest
  * //               min: Number("int"), // required
@@ -155,6 +155,10 @@ declare const DescribeCapacityProvidersCommand_base: {
  * //             maxSpotPriceAsPercentageOfOptimalOnDemandPrice: Number("int"),
  * //           },
  * //           fipsEnabled: true || false,
+ * //           capacityReservations: { // CapacityReservationRequest
+ * //             reservationGroupArn: "STRING_VALUE",
+ * //             reservationPreference: "RESERVATIONS_ONLY" || "RESERVATIONS_FIRST" || "RESERVATIONS_EXCLUDED",
+ * //           },
  * //         },
  * //         propagateTags: "CAPACITY_PROVIDER" || "NONE",
  * //         infrastructureOptimization: { // InfrastructureOptimization
@@ -191,18 +195,13 @@ declare const DescribeCapacityProvidersCommand_base: {
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
  *
  * @throws {@link ClientException} (client fault)
- *  <p>These errors are usually caused by a client action. This client action might be using
- * 			an action or resource on behalf of a user that doesn't have permissions to use the
- * 			action or resource. Or, it might be specifying an identifier that isn't valid.</p>
+ *  <p>These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.</p>
  *
  * @throws {@link ClusterNotFoundException} (client fault)
  *  <p>The specified cluster wasn't found. You can view your available clusters with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListClusters.html">ListClusters</a>. Amazon ECS clusters are Region specific.</p>
  *
  * @throws {@link InvalidParameterException} (client fault)
- *  <p>The specified parameter isn't valid. Review the available parameters for the API
- * 			request.</p>
- *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS
- * 				service event messages</a>. </p>
+ *  <p>The specified parameter isn't valid. Review the available parameters for the API request.</p> <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service event messages</a>. </p>
  *
  * @throws {@link ServerException} (server fault)
  *  <p>These errors are usually caused by a server issue.</p>
@@ -214,17 +213,10 @@ declare const DescribeCapacityProvidersCommand_base: {
  * <p>Base exception class for all service exceptions from ECS service.</p>
  *
  *
- * @example To describe a specific capacity provider
+ * @example To describe all capacity providers
  * ```javascript
- * // This example retrieves details about the capacity provider MyCapacityProvider
- * const input = {
- *   capacityProviders: [
- *     "MyCapacityProvider"
- *   ],
- *   include: [
- *     "TAGS"
- *   ]
- * };
+ * // This example retrieves details about all capacity providers.
+ * const input = { /* empty *\/ };
  * const command = new DescribeCapacityProvidersCommand(input);
  * const response = await client.send(command);
  * /* response is
@@ -244,22 +236,36 @@ declare const DescribeCapacityProvidersCommand_base: {
  *       capacityProviderArn: "arn:aws:ecs:us-west-2:123456789012:capacity-provider/MyCapacityProvider",
  *       name: "MyCapacityProvider",
  *       status: "ACTIVE",
- *       tags: [
- *         {
- *           key: "environment",
- *           value: "production"
- *         }
- *       ]
+ *       tags:       []
+ *     },
+ *     {
+ *       capacityProviderArn: "arn:aws:ecs:us-west-2:123456789012:capacity-provider/FARGATE",
+ *       name: "FARGATE",
+ *       status: "ACTIVE",
+ *       tags:       []
+ *     },
+ *     {
+ *       capacityProviderArn: "arn:aws:ecs:us-west-2:123456789012:capacity-provider/FARGATE_SPOT",
+ *       name: "FARGATE_SPOT",
+ *       status: "ACTIVE",
+ *       tags:       []
  *     }
  *   ]
  * }
  * *\/
  * ```
  *
- * @example To describe all capacity providers
+ * @example To describe a specific capacity provider
  * ```javascript
- * // This example retrieves details about all capacity providers.
- * const input = { /* empty *\/ };
+ * // This example retrieves details about the capacity provider MyCapacityProvider
+ * const input = {
+ *   capacityProviders: [
+ *     "MyCapacityProvider"
+ *   ],
+ *   include: [
+ *     "TAGS"
+ *   ]
+ * };
  * const command = new DescribeCapacityProvidersCommand(input);
  * const response = await client.send(command);
  * /* response is
@@ -279,19 +285,12 @@ declare const DescribeCapacityProvidersCommand_base: {
  *       capacityProviderArn: "arn:aws:ecs:us-west-2:123456789012:capacity-provider/MyCapacityProvider",
  *       name: "MyCapacityProvider",
  *       status: "ACTIVE",
- *       tags:       []
- *     },
- *     {
- *       capacityProviderArn: "arn:aws:ecs:us-west-2:123456789012:capacity-provider/FARGATE",
- *       name: "FARGATE",
- *       status: "ACTIVE",
- *       tags:       []
- *     },
- *     {
- *       capacityProviderArn: "arn:aws:ecs:us-west-2:123456789012:capacity-provider/FARGATE_SPOT",
- *       name: "FARGATE_SPOT",
- *       status: "ACTIVE",
- *       tags:       []
+ *       tags: [
+ *         {
+ *           key: "environment",
+ *           value: "production"
+ *         }
+ *       ]
  *     }
  *   ]
  * }

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/DescribeClustersCommand.d.ts

@@ -27,9 +27,7 @@ declare const DescribeClustersCommand_base: {
     getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
 };
 /**
- * <p>Describes one or more of your clusters.</p>
- *          <p> For CLI
- * 			examples, see <a href="https://github.com/aws/aws-cli/blob/develop/awscli/examples/ecs/describe-clusters.rst">describe-clusters.rst</a> on GitHub.</p>
+ * <p>Describes one or more of your clusters.</p> <p> For CLI examples, see <a href="https://github.com/aws/aws-cli/blob/develop/awscli/examples/ecs/describe-clusters.rst">describe-clusters.rst</a> on GitHub.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -140,15 +138,10 @@ declare const DescribeClustersCommand_base: {
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
  *
  * @throws {@link ClientException} (client fault)
- *  <p>These errors are usually caused by a client action. This client action might be using
- * 			an action or resource on behalf of a user that doesn't have permissions to use the
- * 			action or resource. Or, it might be specifying an identifier that isn't valid.</p>
+ *  <p>These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.</p>
  *
  * @throws {@link InvalidParameterException} (client fault)
- *  <p>The specified parameter isn't valid. Review the available parameters for the API
- * 			request.</p>
- *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS
- * 				service event messages</a>. </p>
+ *  <p>The specified parameter isn't valid. Review the available parameters for the API request.</p> <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service event messages</a>. </p>
  *
  * @throws {@link ServerException} (server fault)
  *  <p>These errors are usually caused by a server issue.</p>

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/DescribeContainerInstancesCommand.d.ts

@@ -27,8 +27,7 @@ declare const DescribeContainerInstancesCommand_base: {
     getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
 };
 /**
- * <p>Describes one or more container instances. Returns metadata about each container
- * 			instance requested.</p>
+ * <p>Describes one or more container instances. Returns metadata about each container instance requested.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -149,18 +148,13 @@ declare const DescribeContainerInstancesCommand_base: {
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
  *
  * @throws {@link ClientException} (client fault)
- *  <p>These errors are usually caused by a client action. This client action might be using
- * 			an action or resource on behalf of a user that doesn't have permissions to use the
- * 			action or resource. Or, it might be specifying an identifier that isn't valid.</p>
+ *  <p>These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.</p>
  *
  * @throws {@link ClusterNotFoundException} (client fault)
  *  <p>The specified cluster wasn't found. You can view your available clusters with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListClusters.html">ListClusters</a>. Amazon ECS clusters are Region specific.</p>
  *
  * @throws {@link InvalidParameterException} (client fault)
- *  <p>The specified parameter isn't valid. Review the available parameters for the API
- * 			request.</p>
- *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS
- * 				service event messages</a>. </p>
+ *  <p>The specified parameter isn't valid. Review the available parameters for the API request.</p> <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service event messages</a>. </p>
  *
  * @throws {@link ServerException} (server fault)
  *  <p>These errors are usually caused by a server issue.</p>

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/DescribeExpressGatewayServiceCommand.d.ts

@@ -27,13 +27,7 @@ declare const DescribeExpressGatewayServiceCommand_base: {
     getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
 };
 /**
- * <p>Retrieves detailed information about an Express service, including current status,
- * 			configuration, managed infrastructure, and service revisions.</p>
- *          <p>Returns comprehensive service details, active service revisions, ingress paths with
- * 			endpoints, and managed Amazon Web Services resource status including load balancers and auto-scaling
- * 			policies.</p>
- *          <p>Use the <code>include</code> parameter to retrieve additional information such as
- * 			resource tags.</p>
+ * <p>Retrieves detailed information about an Express service, including current status, configuration, managed infrastructure, and service revisions.</p> <p>Returns comprehensive service details, active service revisions, ingress paths with endpoints, and managed Amazon Web Services resource status including load balancers and auto-scaling policies.</p> <p>Use the <code>include</code> parameter to retrieve additional information such as resource tags.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -141,18 +135,13 @@ declare const DescribeExpressGatewayServiceCommand_base: {
  *  <p>You don't have authorization to perform the requested action.</p>
  *
  * @throws {@link ClientException} (client fault)
- *  <p>These errors are usually caused by a client action. This client action might be using
- * 			an action or resource on behalf of a user that doesn't have permissions to use the
- * 			action or resource. Or, it might be specifying an identifier that isn't valid.</p>
+ *  <p>These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.</p>
  *
  * @throws {@link ClusterNotFoundException} (client fault)
  *  <p>The specified cluster wasn't found. You can view your available clusters with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListClusters.html">ListClusters</a>. Amazon ECS clusters are Region specific.</p>
  *
  * @throws {@link InvalidParameterException} (client fault)
- *  <p>The specified parameter isn't valid. Review the available parameters for the API
- * 			request.</p>
- *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS
- * 				service event messages</a>. </p>
+ *  <p>The specified parameter isn't valid. Review the available parameters for the API request.</p> <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service event messages</a>. </p>
  *
  * @throws {@link ResourceNotFoundException} (client fault)
  *  <p>The specified resource wasn't found.</p>