@rig-c/parts 1.60.1 → 1.61.0
This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
- package/README.md +4 -1
- package/cli.ts +7 -22
- package/docs/AUTHORING.md +265 -27
- package/docs/STABILITY.md +43 -4
- package/package.json +4 -2
- package/src/alternatelayers.ts +115 -0
- package/src/assemble.ts +71 -20
- package/src/build.ts +58 -15
- package/src/check.ts +1049 -135
- package/src/comfy/painting.ts +2 -1
- package/src/config.ts +86 -14
- package/src/configwrite.ts +56 -18
- package/src/diagnostics.ts +3 -2
- package/src/limblayout.ts +6 -4
- package/src/limbs.ts +18 -3
- package/src/limbslots.ts +17 -6
- package/src/propose.ts +4 -3
- package/src/remesh.ts +31 -7
- package/src/retune.ts +10 -8
- package/src/rig.ts +11 -5
- package/src/structure.ts +2 -1
- package/tools/alternate-cli.ts +25 -0
- package/tools/build-process.ts +206 -0
package/docs/AUTHORING.md
CHANGED
|
@@ -118,17 +118,17 @@ read by no CPU stage).
|
|
|
118
118
|
| `assemble.extend_below_crop` | assemble | **proposed** with the plan: `{part, run, tag}` — a head-run part that reaches the bottom of the head crop is continued from a full-run layer, whole connected components |
|
|
119
119
|
| `assemble.patches` | assemble; `meshes`/`regions` keys may name them too | **authored**, optional: `[{name, box, alpha, draw}]` — an extra part cut from the **painting** itself, for figure no See-through layer holds (a hem both runs dropped). `box` is `[x0, y0, x1, y1]` in **rig** pixels, `x1`/`y1` exclusive — the space of `parts.json` and `recomposite_rig.png`, where the hole is found; `alpha` is `"silhouette"` (the painting's figure silhouette inside the box, the one `--seam silhouette` uses) or `"box"` (the whole box); `draw` is `"back"`, `"front"` or `{"before": "<plan part>"}`. A patch is always a region: its bone is `regions.<name>`, in the one place every region's bone lives, and a `meshes` entry for it is refused. `draw` sets assembled part order; an exclusively bound limb rider's final rig slot joins that limb's block (see the limbs subsection). See §5 for how to place one |
|
|
120
120
|
| `assemble.cuts` | assemble; `meshes`/`regions` keys may name the new parts too, and must (each is a part like any other) | **authored**, optional (issue #170): `[{from, into, polygon, draw, overlap, under, under_fill}]`, `under` and `under_fill` optional — a plan part's layer cut by a polygon the author draws: the pixels of plan part `from` whose **centre** lies inside `polygon` (even-odd; a centre exactly on an edge is outside) leave `from` and make the new part `into`, colour and alpha, so every pixel of the layer ends in exactly one of the two. `polygon` is `[[x, y], …]`, at least three points, non-negative integer **rig** pixels — the space of `parts.json` and of the patches' boxes. The file that shows the layer in those coordinates is `assemble`'s own `rig/parts/<from>.png`, placed at its `parts.json` `x`, `y` (the PNG's pixel `(i, j)` is rig pixel `(x + i, y + j)`), or `render/recomposite_rig.png`, the whole rig 1:1; the contact sheets (`sheet`) are scaled and carry no coordinates. `draw` is `"back"`, `"front"` or `{"before": "<plan part>"}`, as for a patch (to keep the setup pose, draw the piece immediately in front of `from` — `{"before": "<the plan part after from>"}`, or `"front"` when `from` is the last plan part; `{"before": "<from>"}` draws it behind `from`, which `under` refuses as `ASSEMBLE_UNDER_DRAW` because the fill would hide it). `from` must be a plan part (`CONFIG_NAME_RESOLVES`; a patch or another cut's piece is refused; a part a limb takes may be cut where no segment of the limb holds it, issue #564, §5 *Limbs*), `into` a new name (`CONFIG_PART_UNIQUE`), the polygon three or more integer points (`CONFIG_FIELD_TYPE`). The piece's `parts.json` record carries `from`'s `<run>:<tag>` and its own counts, each split from the layer's by where the pixel lies; it is a mesh or a region under its own name, and the coverage rule holds it like a plan part. What the config cannot know the stage refuses: a polygon point past the rig (`ASSEMBLE_CUT_INSIDE`), two cuts of one part sharing a pixel (`ASSEMBLE_CUT_OVERLAP`), a cut that takes none of the layer's opaque pixels or leaves `from` none (`ASSEMBLE_CUT_PIXELS`), a cut of a part a limb takes that takes a pixel a segment of the limb holds (`ASSEMBLE_CUT_CROSSES_LIMB`). `overlap` is required, a non-negative integer of rig pixels with no default (`CONFIG_FIELD_TYPE`): the **band** — the polygon's pixels within `overlap` px of its edge by Chebyshev distance (the polygon's mask less its erosion by a `2 * overlap + 1` square) — stays in `from` as well as going to the piece, so the piece's resampled edge has art under it; the counts stay a strict partition and the band is the base's extra copy, printed on the `cut:` line. At `0` the two abut and `check`'s seam bar judges the edge between them (`CHECK_SEAM_WITHIN_BAR`, §5). A band only covers the edge at rest: a piece that swings well clear of where it was painted shows the hole it leaves, and a thin piece's band shows a ghost of the piece. `under` (issue #193), optional, is the author's image of what lies under the piece: a PNG path relative to the config's directory (`CONFIG_FIELD_TYPE` unless a non-empty string), in rig pixels over the polygon's **bounding box** — the least and greatest polygon x and y, so the image is `max x − min x` by `max y − min y` and its pixel `(i, j)` is rig pixel `(min x + i, min y + j)`. Where the cut removed pixels from `from` — the piece's pixels (alpha above 0) less the band — `from` takes the image's pixel, colour and alpha wherever the image's alpha is at least the alpha the cut removed there (**filled**); elsewhere `from` stays empty there (**left empty**): a transparent pixel is the author's statement that nothing lies under it (the background, or a part drawn behind), and a less opaque one is not half-filled. The image is read nowhere else, so its pixels over the band, over the box outside the polygon or where the layer had no art never change `from`. The `cut:` line then ends `; under <n> px filled, <m> px left empty` (`n + m` is every removed pixel), so an unintended hole is a number in the log, not a guess; the filled pixels count in `from`'s `opaque_px` and `occluded_px` (the piece is drawn over them), never as visible or projected. The stage refuses: a file that is not there (`ASSEMBLE_UNDER_PRESENT`) or not a PNG (`ASSEMBLE_UNDER_DECODES`), an image not exactly the box's size (`ASSEMBLE_UNDER_SIZE`, both sizes given), an image that fills none of the removed pixels — all transparent there, or another file (`ASSEMBLE_UNDER_EMPTY`; to leave the whole hole, drop `under`), and a piece drawn behind `from` (`ASSEMBLE_UNDER_DRAW`: the fill would hide it; draw it `"front"` or `{"before": "<the plan part after from>"}`). Producing the image is the author's, by whatever means; absent, `from` keeps only its band. `under_fill` (issue #360), optional, is the one value `"colour"` (`CONFIG_FIELD_TYPE` on any other): the same pixels are filled and left empty, and a filled pixel takes the image's **colour** at the alpha the cut removed there instead of the image's alpha, so `from`'s alpha is the uncut layer's wherever the image fills and its silhouette does not grow — an opaque image over a soft edge leaves the edge soft. It applies to the part's hidden-art layer as well as to a file; a cut with neither is refused (`ASSEMBLE_UNDER_FILL_SOURCE`). The `cut:` line's filled count then says how many took the colour only: `; under 190 px filled (190 colour only, at the alpha the cut removed), 0 px left empty`. Absent, a filled pixel takes the image's colour and alpha, as above |
|
|
121
|
-
| `assemble.alternates` | assemble, rig, check (`--set`, `--all-sets`) | **authored**, optional (issues #454, #465, #472, #473, #476): `[{name, source?, full?, head?, head_box?, parts?, hides?, cuts?, skeleton?, drawn?, tips?, front?}]` — alternate painting sets assembled into `<out>/rig/parts/<set>_<part>.png` (`parts.json` `alternates`), attached on each covered slot in `rig.json` as `<set>_<part>` beside the base attachment, and indexed in `<out>/rig/sets.json` (`rig-parts-sets/1`: `sets.<set>.slots`, `.hides`, `.drawn` when present, and `.threshold: {yaw: 15, pitch: 12}` when the set replaces `face` on a rig with `turn` or `turn`/`tilt` slider animations). `source`, `full` and `head` may instead be given on the CLI with `--alt <name>=<source>:<full>[:<head>]`. `parts` lists the subset of parts the set replaces (default: every part not in `hides`); a **subset set** (issue #473, e.g. mouth visemes `a`, `i`, `u` with `"parts": ["mouth"]`) cuts only its covered parts from the alternate runs (refusing with `ASSEMBLE_ALT_INPUT_PRESENT` if a covered part's layer is missing or empty), writes only `{slot: "<set>_<slot>"}` in `sets.json` so `@rig-c/play`'s `setSet(name)` switches those slots while leaving every other slot on its base attachment (and `setSet(null)` restores the base pose), may be keyed on a slot attachment track in `motion.animations_from` as `{"t": …, "set": "<name>" \| null}` (`CONFIG_SET_COVERS_SLOT` if `"set"` is undeclared or does not cover the track's slot), and under `check --set <name>` counts `ANIMATIONS_DO_NOT_FOLD` only on its own covered slots; `hides` lists slots the set hides (`null` in `sets.json`). A **gesture subset set** (issue #476) covers a limb chain declared in `config.limbs.<limb>` (all of its segment `part`s; with `drawn` alone, cut at the base's joints posed to the set's own `drawn` angles by `poseBoneEntriesForDrawn`, each segment keeping the base's length; with `skeleton` (issue #539), cut at the skeleton's own joint positions by `placeBoneEntriesForSkeleton` — each covered bone the body-18 table names (`sleeve_*`, `arm_*0`/`arm_*1`, `leg_*0`/`leg_*1`) at its skeleton origin with the skeleton segment's own length and direction (`drawn` overriding the direction of a bone it names), and a covered bone the table does not name (a hand link `arm_r2`, a single `foot_r`) placed from its parent's new place — its base offset from the parent, stretched along the parent by the parent's length change and turned by its turn, so a link or a foot at the parent's end lands on the skeleton's end — with its base length and the drawn or base direction, so a foreshortened shin or forearm is cut where it is painted; naming the unsplit `from` layer, covering only some segments of the limb, or declaring polygon `cuts` on a limb set is refused with `CONFIG_LIMB_SET_JOINTS`) and carries `drawn` (or `skeleton`) for the covered bones only (giving `drawn` for an uncovered bone is refused with `CONFIG_SET_COVERS_BONE` / `RIG_SET_COVERS_BONE`; uncovered bones keep the base's `drawn`). A subset set's limb part takes no pixel that a base part drawn after it, which the set neither covers nor hides, covers at setup (issue #587): the set's attachment is drawn in the base slot's place, so that base part is drawn over it and what the set's painting shows there is that base part (shorts over a leg set's thigh top, which See-through synthesised in the set's leg layer); `assemble` clears those pixels — the base part's PNG at alpha above 8, at its `parts.json` x, y, on the shared canvas — from the set's part once its limbs are cut, before any count — its `merged_px` and its cap's record too (issue #603): a cap pixel it clears leaves the count it was in (`layer_px`, `image_px`, `upper_px`, `lower_px`, `lower_kept_px`) for the cap's `excluded_px`, written only when above 0, so every count is the written PNG's — and prints `LINT set "<set>" <part>: <n> px under <base part> excluded` per part and base part that took a pixel (n counts alpha above 8); a set that carries that base part itself (`"parts": ["thigh_l", "shin_l", "bottomwear"]`) excludes nothing and writes what it wrote before. A subset set that names one limb side of a layer more limbs take (issue #588: `"parts": ["thigh_r", "shin_r"]` where `leg_r` and `leg_l` both take the one `legs` layer) would put every pixel of that layer on its one limb, so each of its parts would hold a piece of both legs; when the set's layer holds more than one island (8-connected pixels with alpha above 8) of at least 1 % of its largest (issue #608: the ghost clean-up's own share; a smaller island is a speck, which goes with the island nearest it — the one holding the pixel centre nearest one of the speck's, none when two are equally near — and is never an island of its own), each segment part keeps the island its joints fall on — its bone's origin and the next segment's bone's origin, at the set's own bones, a joint on the island of a pixel whose square holds the point, and a joint on no island on the one island whose nearest pixel centre lies within the radius of the cap cut at that joint (`cap.radius`: an ankle just past the legwear's edge, on the shoe) — and drops the rest, once its limbs are cut and before the exclusion above, and `assemble` prints `LINT set "<set>" <part>: <layer part> holds <n> islands (8-connected, alpha above 8)[, and <s> speck(s) under 1 % of the largest (<f> px), each with the island nearest it], kept the one under <bone> [x, y] and <bone> [x, y][ (<e> px off it, within its cap's radius <r>)] (<k> px), dropped <m> (<d> px)` per part (k and d count the part's pixels above alpha 8, m the islands it lost one from, and `dropped none` when it lost none); a joint on no island with none or two within that radius, or with no cap cut at it (a limb's first joint), and a segment whose joints fall on two, are refused with `ASSEMBLE_ALT_LIMB_ISLAND` rather than guessed. A layer of one island — specks aside — may hold both legs over each other (a folded shin across the standing leg; issue #609): each of the set's segment parts then keeps the pixels nearer its own limb's segment line — the polyline of only its segments taking that source, their bone origins and the last segment's supplied tip or following segment's joint (issue #638) — than the other limb's, both in the set's pose, and gives the rest away, once its limbs are cut and before the exclusion above; a pixel whose two distances differ by 0.5 px or less (the overlap band: half a pixel, the reach by which a pixel centre is read as on a line) goes to the limb whose part there is drawn later in the base's draw order, and the `LINT set` line above counts what each part kept, gave and held in the band. The other limb stands where the set's `skeleton` places it — its keypoints place every limb bone of the body-18 table, the other leg's as well as the set's own (its `drawn` and `drawnLength` stay the covered bones') — and never at the base's place: a set that does not place it (a `drawn` set, which may not name a bone it does not cover, or a set with neither) is refused with `ASSEMBLE_ALT_LIMB_POSE` when its layer has art where the base draws that limb, and when it has none nothing says the layer holds it and the layer is cut as before; two limbs whose segment lines run closer than the limb's half-width over most of where their art can meet are refused with `ASSEMBLE_ALT_LIMB_OVERLAP`. A set that carries every limb of the layer is cut as before. For a subset set, where a limb's own source layer holds art (`alpha > 8`) under another layer of that run drawn in front (`alpha > 8`, by the projection's plan/depth order), the limb keeps its own layer pixels through projection, limb cutting, island/nearest-line assignment, base-footprint exclusion, fringe clearing and seam correction (issue #637). Those pixels are occluded, never counted as painting projection; no base footprint or painting colour replaces them. After source-art island/nearest-line assignment, a source-transparent cap pixel is assigned before protection, in both doors: its centre is compared against only the segments taking the recipient's source, at the set's supplied bones (ankle-to-toe for a separate foot source), with the existing 0.5 px overlap band and base draw order. A missing last endpoint is refused with `ASSEMBLE_ALT_LIMB_POSE`; an actual following joint may supply that endpoint, never a guessed point. An unposed other limb with base art beneath these cap pixels is likewise refused; without such overlap the existing compatible path retains the cap without inventing the other limb's pose. A pixel cleared by this assignment is never restored. `CAP_FROM_UPPER` records a copy made before assignment and alone proves no ownership: only a retained copy is protected beneath the upper segment, which is drawn over it. The source-art island selection itself is unchanged. Other retained cap pixels (from the layer or a supplied cap image) are protected under an actual front layer even where the lower source is transparent. Protection follows each assigned piece through exclusion, fringe clearing and seam correction; it never restores a pixel ownership removed. Cap pixels removed during ownership leave their original counts for `excluded_px`, just as excluded pixels do, so the cap ledger describes the written PNG. Target assignment reconciles this ledger even when there are no source-transparent cap candidates and when a direct caller does not request cover protection. Unprotected source pixels still obey the base-footprint exclusion. Missing limb/cap art is never extended or guessed. Base builds and uncovered, unexcluded sets keep their existing bytes. `skeleton` (a pose file path relative to the config's directory, `{"width": W, "height": H, "points": {…}}` with all 18 body-18 keypoints on the canvas, validated by the same rules as `generation.control.skeleton`: `CONFIG_FILE_PRESENT`, `CONFIG_IS_JSON`, `CONFIG_FIELD_TYPE`, `CONFIG_KEY_KNOWN`, `CONFIG_KEY_UNIQUE`, `CONFIG_POSE_CANVAS`, `CONFIG_POSE_KEYPOINTS`, `CONFIG_POSE_IN_CANVAS`) or `drawn` (`{<bone>: <worldDegrees>}`, each bone resolved against `bones`, `CONFIG_NAME_RESOLVES`) declares the posed angles the alternate was painted at (issue #465); when `skeleton` is given, `assemble` derives `drawn` from its 18 keypoints (filtered to covered bones on a subset set, with `drawn` overriding any bone named in both), records both `skeleton` (scaled by `assemble.rig_scale` to rig px) and `drawn` in `parts.json` `alternates` — and, when the skeleton placed the set's limb bones (issue #539), `drawnLength` (`{<bone>: <ratio>}`, each covered table bone's skeleton segment length over its base length, 6 places) and `registration` (`{offset: [dx, dy], scale}`: the similarity without rotation, about the canvas origin, that maps the skeleton's torso — the mean of its shoulders `r_shoulder`/`l_shoulder` to the mean of its hips `r_hip`/`l_hip`, read where the base declares the bone rooted there, `sleeve_*0`/`arm_*0` and `leg_*0` — onto those base bones' origins, 6 places), both also written to `sets.json`; the set's painting must be registered, its torso within 1 rig px and 1 % in scale of the base's, or the set is refused by name before any joint is cut (`ASSEMBLE_ALT_SKELETON_REGISTERED`, with the offset and scale the painting would need) — and the `rig` stage writes `<set>_*` region and mesh attachments in the bone-local frame of `poseRigBonesForDrawn(bones, drawn)` (weighting limb segments directly from `skeleton`'s joint endpoints when `skeleton` is present) and emits `drawn` in `sets.json` so `rig-pose` and `check --set <name>` / `--all-sets` pose the bones at `drawn` without rotating the already-posed art a second time. `front` (issue #664) lists covered limb segment parts the set draws on their **front slot** instead of the base slot: each must be in the set's `parts` and not its `hides`, and listed in some `config.limbs.<limb>.front.parts` (`CONFIG_SET_FRONT`); the set then maps `<part>_front` (never `<part>`) to `<set>_<part>` in `parts.json` and `sets.json` and hides `<part>` (and `<part>_still`), its #587 exclusion counts only base parts drawn after the front slot's target, and keying that part's set on a slot track is refused (`CONFIG_SET_FRONT_KEYED`) — *Front slots (issue #664)* below |
|
|
121
|
+
| `assemble.alternates` | assemble, rig, check (`--set`, `--all-sets`) | **authored**, optional (issues #454, #465, #472, #473, #476): `[{name, source?, full?, head?, head_box?, parts?, hides?, cuts?, skeleton?, anchor?, drawn?, tips?, front?}]` — alternate painting sets assembled into `<out>/rig/parts/<set>_<part>.png` (`parts.json` `alternates`), attached on each covered slot in `rig.json` as `<set>_<part>` beside the base attachment, and indexed in `<out>/rig/sets.json` (`rig-parts-sets/1`: `sets.<set>.slots`, `.hides`, `.drawn` when present, and `.threshold: {yaw: 15, pitch: 12}` when the set replaces `face` on a rig with `turn` or `turn`/`tilt` slider animations). `source`, `full` and `head` may instead be given on the CLI with `--alt <name>=<source>:<full>[:<head>]`. Windows absolute drive paths such as `C:\paint\painting.png` are accepted as written; each segment's leading drive colon belongs to that path, while other colons still separate `source`, `full` and `head`. `parts` lists the subset of parts the set replaces (default: every part not in `hides`); a **subset set** (issue #473, e.g. mouth visemes `a`, `i`, `u` with `"parts": ["mouth"]`) cuts only its covered parts from the alternate runs (refusing with `ASSEMBLE_ALT_INPUT_PRESENT` if a covered part's layer is missing or empty), writes only `{slot: "<set>_<slot>"}` in `sets.json` so `@rig-c/play`'s `setSet(name)` switches those slots while leaving every other slot on its base attachment (and `setSet(null)` restores the base pose), may be keyed on a slot attachment track in `motion.animations_from` as `{"t": …, "set": "<name>" \| null}` (`CONFIG_SET_COVERS_SLOT` if `"set"` is undeclared or does not cover the track's slot), and under `check --set <name>` counts `ANIMATIONS_DO_NOT_FOLD` only on its own covered slots; `hides` lists slots the set hides (`null` in `sets.json`). A **gesture subset set** (issue #476) covers a limb chain declared in `config.limbs.<limb>` (all of its segment `part`s; with `drawn` alone, cut at the base's joints posed to the set's own `drawn` angles by `poseBoneEntriesForDrawn`, each segment keeping the base's length; with `skeleton` (issue #539), cut at the skeleton's own joint positions by `placeBoneEntriesForSkeleton` — each covered bone the body-18 table names (`sleeve_*`, `arm_*0`/`arm_*1`, `leg_*0`/`leg_*1`) at its skeleton origin with the skeleton segment's own length and direction (`drawn` overriding the direction of a bone it names), and a covered bone the table does not name (a hand link `arm_r2`, a single `foot_r`) placed from its parent's new place — its base offset from the parent, stretched along the parent by the parent's length change and turned by its turn, so a link or a foot at the parent's end lands on the skeleton's end — with its base length and the drawn or base direction, so a foreshortened shin or forearm is cut where it is painted; naming the unsplit `from` layer, covering only some segments of the limb, or declaring polygon `cuts` on a limb set is refused with `CONFIG_LIMB_SET_JOINTS`) and carries `drawn` (or `skeleton`) for the covered bones only (giving `drawn` for an uncovered bone is refused with `CONFIG_SET_COVERS_BONE` / `RIG_SET_COVERS_BONE`; uncovered bones keep the base's `drawn`). A subset set's limb part takes no pixel that a base part drawn after it, which the set neither covers nor hides, covers at setup (issue #587): the set's attachment is drawn in the base slot's place, so that base part is drawn over it and what the set's painting shows there is that base part (shorts over a leg set's thigh top, which See-through synthesised in the set's leg layer); `assemble` clears those pixels — the base part's PNG at alpha above 8, at its `parts.json` x, y, on the shared canvas — from the set's part once its limbs are cut, before any count — its `merged_px` and its cap's record too (issue #603): a cap pixel it clears leaves the count it was in (`layer_px`, `image_px`, `upper_px`, `lower_px`, `lower_kept_px`) for the cap's `excluded_px`, written only when above 0, so every count is the written PNG's — and prints `LINT set "<set>" <part>: <n> px under <base part> excluded` per part and base part that took a pixel (n counts alpha above 8); a set that carries that base part itself (`"parts": ["thigh_l", "shin_l", "bottomwear"]`) excludes nothing and writes what it wrote before. A subset set that names one limb side of a layer more limbs take (issue #588: `"parts": ["thigh_r", "shin_r"]` where `leg_r` and `leg_l` both take the one `legs` layer) would put every pixel of that layer on its one limb, so each of its parts would hold a piece of both legs; when the set's layer holds more than one island (8-connected pixels with alpha above 8) of at least 1 % of its largest (issue #608: the ghost clean-up's own share; a smaller island is a speck, which goes with the island nearest it — the one holding the pixel centre nearest one of the speck's, none when two are equally near — and is never an island of its own), each segment part keeps the island its joints fall on — its bone's origin and the next segment's bone's origin, at the set's own bones, a joint on the island of a pixel whose square holds the point, and a joint on no island on the one island whose nearest pixel centre lies within the radius of the cap cut at that joint (`cap.radius`: an ankle just past the legwear's edge, on the shoe) — and drops the rest, once its limbs are cut and before the exclusion above, and `assemble` prints `LINT set "<set>" <part>: <layer part> holds <n> islands (8-connected, alpha above 8)[, and <s> speck(s) under 1 % of the largest (<f> px), each with the island nearest it], kept the one under <bone> [x, y] and <bone> [x, y][ (<e> px off it, within its cap's radius <r>)] (<k> px), dropped <m> (<d> px)` per part (k and d count the part's pixels above alpha 8, m the islands it lost one from, and `dropped none` when it lost none); a joint on no island with none or two within that radius, or with no cap cut at it (a limb's first joint), and a segment whose joints fall on two, are refused with `ASSEMBLE_ALT_LIMB_ISLAND` rather than guessed. A layer of one island — specks aside — may hold both legs over each other (a folded shin across the standing leg; issue #609): each of the set's segment parts then keeps the pixels nearer its own limb's segment line — the polyline of only its segments taking that source, their bone origins and the last segment's supplied tip or following segment's joint (issue #638) — than the other limb's, both in the set's pose, and gives the rest away, once its limbs are cut and before the exclusion above; a pixel whose two distances differ by 0.5 px or less (the overlap band: half a pixel, the reach by which a pixel centre is read as on a line) goes to the limb whose part there is drawn later in the base's draw order, and the `LINT set` line above counts what each part kept, gave and held in the band. The other limb stands where the set's `skeleton` places it — its keypoints place every limb bone of the body-18 table, the other leg's as well as the set's own (its `drawn` and `drawnLength` stay the covered bones') — and never at the base's place: a set that does not place it (a `drawn` set, which may not name a bone it does not cover, or a set with neither) is refused with `ASSEMBLE_ALT_LIMB_POSE` when its layer has art where the base draws that limb, and when it has none nothing says the layer holds it and the layer is cut as before; two limbs whose segment lines run closer than the limb's half-width over most of where their art can meet are refused with `ASSEMBLE_ALT_LIMB_OVERLAP`. A set that carries every limb of the layer is cut as before. For a subset set, where a limb's own source layer holds art (`alpha > 8`) under another layer of that run drawn in front (`alpha > 8`, by the projection's plan/depth order), the limb keeps its own layer pixels through projection, limb cutting, island/nearest-line assignment, base-footprint exclusion, fringe clearing and seam correction (issue #637). Those pixels are occluded, never counted as painting projection; no base footprint or painting colour replaces them. After source-art island/nearest-line assignment, a source-transparent cap pixel is assigned before protection, in both doors: its centre is compared against only the segments taking the recipient's source, at the set's supplied bones (ankle-to-toe for a separate foot source), with the existing 0.5 px overlap band and base draw order. A missing last endpoint is refused with `ASSEMBLE_ALT_LIMB_POSE`; an actual following joint may supply that endpoint, never a guessed point. An unposed other limb with base art beneath these cap pixels is likewise refused; without such overlap the existing compatible path retains the cap without inventing the other limb's pose. A pixel cleared by this assignment is never restored. `CAP_FROM_UPPER` records a copy made before assignment and alone proves no ownership: only a retained copy is protected beneath the upper segment, which is drawn over it. The source-art island selection itself is unchanged. Other retained cap pixels (from the layer or a supplied cap image) are protected under an actual front layer even where the lower source is transparent. Protection follows each assigned piece through exclusion, fringe clearing and seam correction; it never restores a pixel ownership removed. Cap pixels removed during ownership leave their original counts for `excluded_px`, just as excluded pixels do, so the cap ledger describes the written PNG. Target assignment reconciles this ledger even when there are no source-transparent cap candidates and when a direct caller does not request cover protection. Unprotected source pixels still obey the base-footprint exclusion. Missing limb/cap art is never extended or guessed. Base builds and uncovered, unexcluded sets keep their existing bytes. `skeleton` (a pose file path relative to the config's directory, `{"width": W, "height": H, "points": {…}}` with all 18 body-18 keypoints on the canvas, validated by the same rules as `generation.control.skeleton`: `CONFIG_FILE_PRESENT`, `CONFIG_IS_JSON`, `CONFIG_FIELD_TYPE`, `CONFIG_KEY_KNOWN`, `CONFIG_KEY_UNIQUE`, `CONFIG_POSE_CANVAS`, `CONFIG_POSE_KEYPOINTS`, `CONFIG_POSE_IN_CANVAS`) or `drawn` (`{<bone>: <worldDegrees>}`, each bone resolved against `bones`, `CONFIG_NAME_RESOLVES`) declares the posed angles the alternate was painted at (issue #465); when `skeleton` is given, `assemble` derives `drawn` from its 18 keypoints (filtered to covered bones on a subset set, with `drawn` overriding any bone named in both), records both `skeleton` (scaled by `assemble.rig_scale` to rig px) and `drawn` in `parts.json` `alternates` — and, when the skeleton placed the set's limb bones (issue #539), `drawnLength` (`{<bone>: <ratio>}`, each covered table bone's skeleton segment length over its base length, 6 places) and `registration` (`{offset: [dx, dy], scale}`: the similarity without rotation, about the canvas origin, that maps the skeleton's torso — the mean of its shoulders `r_shoulder`/`l_shoulder` to the mean of its hips `r_hip`/`l_hip`, read where the base declares the bone rooted there, `sleeve_*0`/`arm_*0` and `leg_*0` — onto those base bones' origins, 6 places), both also written to `sets.json`; the set's painting must be registered, its torso within 1 rig px and 1 % in scale of the base's, or the set is refused by name before any joint is cut (`ASSEMBLE_ALT_SKELETON_REGISTERED`, with the offset and scale the painting would need) — and the `rig` stage writes `<set>_*` region and mesh attachments in the bone-local frame of `poseRigBonesForDrawn(bones, drawn)` (weighting limb segments directly from `skeleton`'s joint endpoints when `skeleton` is present) and emits `drawn` in `sets.json` so `rig-pose` and `check --set <name>` / `--all-sets` pose the bones at `drawn` without rotating the already-posed art a second time. `front` (issue #664) lists covered limb segment parts the set draws on their **front slot** instead of the base slot: each must be in the set's `parts` and not its `hides`, and listed in some `config.limbs.<limb>.front.parts` (`CONFIG_SET_FRONT`); the set then maps `<part>_front` (never `<part>`) to `<set>_<part>` in `parts.json` and `sets.json` and hides `<part>` (and `<part>_still`), its #587 exclusion counts only base parts drawn after the front slot's target, and keying that part's set on a slot track is refused (`CONFIG_SET_FRONT_KEYED`) — *Front slots (issue #664)* below `layers` optionally maps covered, nonhidden output part names to layer names in their existing source run (issue #666); for example `"layers": {"upperarm_r": "author:raised", "forearm_r": "author:raised"}`. Limb cuts, caps, islands and base exclusions read the selected layer; the base plan stays unchanged. |
|
|
122
122
|
| `assemble.head_face_underfill` | assemble, `assemble --propose-plan` | **authored**, optional (issue #492): `boolean` (`CONFIG_FIELD_TYPE` on any other). When both runs exist and `full:face` has at least `200` opaque run px (`PROPOSE_MIN_PX`), the stage maps `full:face` into the head canvas via `fullLayerToHead` and measures how much of its hole-filled silhouette (`alpha > 8`) is covered by `head:face` (`alpha > 8`). A head-run `face` covering less than `75 %` (`HEAD_FACE_COVERAGE_FLOOR`, measured `0.0 %..48.6 %` on hollow/omitted head runs vs `84.8 %..99.6 %` on clean head runs across the 4 public examples and 9-standee corpus) is refused with `SEETHROUGH_HEAD_RUN_HOLLOW` unless `head_face_underfill: true` is declared. When `head_face_underfill: true` is declared and `head:face` exists (`opaqueRunPx >= 200`), `fullLayerToHead(full:face)` is composited under `head:face` on the head canvas (`alpha = max(headAlpha, fullAlpha)`, RGB blended by `headAlpha / 255`) before `head:face` is placed in rig space (`underfill=<N>px(full:face)` on the `face` part log line and a `face: head_face_underfill composited …` note in `assemble --propose-plan`). The fill restores transparent pixels only and leaves the cut's own edge where it is — a hollow whose edge is not under hair stays visible, and that is the author's to fix at the cut. When `head:face` has fewer than `200` opaque pixels, `SEETHROUGH_HEAD_RUN_HOLLOW` still fires even under `head_face_underfill: true` because the head run omitted the face layer and cannot supply a jawline |
|
|
123
123
|
| `limbs` | assemble (the cut and the caps), rig (through `regions`), check (`LIMB_ONE_BONE`) | **proposed** by `propose --keypoints` (issue #349), then checked: `{<limb>: {segments: [{part, from, bone}, {part, from, bone, joint, range?, cap?, edge?, cap_shape?, cut_band?}, …], split?, layout?, front?}}`, the upper segment first. The rule is *Limbs: cut at their joints* below the table. `part` is a new part (`CONFIG_PART_NAME`, `CONFIG_PART_UNIQUE` against the plan, patches, cuts and every other limb part); `from` a plan part or a cut's piece (`CONFIG_NAME_RESOLVES`) — the layer the segment's pixels come from, which is cut into the limb parts and is not itself made: a `meshes` or `regions` entry for it is `CONFIG_NAME_RESOLVES`, and the segments of one limb that take one part are consecutive (`CONFIG_LIMB_FROM_RUN`); `bone` a declared bone, each segment's the child of the one before (`CONFIG_LIMB_BONES_CHAIN`); the upper segment names no `joint`, `range`, `cap`, `edge`, `cap_shape` or `cut_band` (`CONFIG_KEY_KNOWN`), every other names its `joint` (`CONFIG_FIELD_PRESENT`) — the joint is its bone's origin; `range` is `[min, max]` degrees from rest with `min <= 0 <= max` (`CONFIG_LIMB_RANGE`), which `assemble` writes into the lower part's `parts.json` record and `check` poses the joint at — its two ends and its middle — reading the seam there (`SEAM_OVER_RANGE`, issue #360; rig-c needs no rotation limit); `cap` a PNG path relative to the config's directory (`CONFIG_FIELD_TYPE`); `edge` `"feather"` (issue #360), the one value it takes, and `cap_shape` `"disc"` (issue #360) or `"ball"` (issue #579) (`CONFIG_FIELD_TYPE` on any other) — the cut's geometry at that joint, *Limbs: cut at their joints* below; absent, the cut is hard and the cap the layer's half-disc of half the limb's width; `cut_band` a whole number of px, 1 or more (`CONFIG_FIELD_TYPE`), on a segment that takes the segment above's part — between two layers nothing is cut, so a band there is `CONFIG_KEY_KNOWN` — places the cut within that many px of the joint line (issue #360, *Limbs: cut at their joints*); absent, the cut is the joint line. Each limb part is attached like any part — `regions.<part>`, which must be the segment's `bone` (`CONFIG_LIMB_BONE`), or a mesh, which `check` holds to that bone alone (`LIMB_ONE_BONE`). With `limbs`, `assemble` reads `bones` too (`CONFIG_FIELD_PRESENT` without it). Absent, nothing is cut at a joint and no byte of any output moves. Optional `front` (issue #664), `{parts: [<own segment part>, …], after: "<produced part>"}`, gives each named segment a second slot `<part>_front`, empty at setup, placed after `after`'s slot family, for a gesture set to draw on (`CONFIG_FRONT_SCOPE`, `CONFIG_FRONT_NAME`, `CONFIG_FRONT_LAYOUT`; *Front slots (issue #664)* below) |
|
|
124
124
|
| `bones` | rig; `propose --from-config` | **proposed** by `propose`, then corrected. A single bone `{name, parent, at, tip?}` or a chain `{chain, parent, points, tip, link_inherit?}` whose links are named `<chain>0 … <chain>n`. Parents come before children. In `rig.json` each link is **turned along its chain** — `rotation` is the direction from its origin to the next link's (the last link's to `tip`) and `length` that distance (issue #73), so a physics constraint added downstream finds a lever; under `--idle-keys ctl` the link's `<link>_ctl` carries the turn and the length and the link sits at local rotation 0 beneath it. A single bone with a `tip` is turned the same way, towards its tip, with that distance as its length (issue #239); a tip on the bone's own origin is refused (`RIG_TIP_DISTINCT`). The five face bones `eye_r`, `eye_l`, `brow_r`, `brow_l` and `mouth` (by name, when one has no tip of its own) are turned to the eye line — the line through the origins of `eye_r` and `eye_l` as `bones` writes them, read image-left to image-right, drawn when parts.json holds both an `eyewhite-r` and an `eyewhite-l` part — so the blink's `scaley` squashes across the eye line on a tilted head; move an eye bone and the line moves with it. With one eyewhite or none, or an eye bone missing, the rig stage's `face axis:` line says so and they keep the page's axes. A bone under a face bone keeps the face's axis. With the line, `rig.json` also declares `invariants.axes` — one entry, `"face"`, through `eye_r` and `eye_l`, holding the turned face bones (and their controls) — so rig-c's gate holds the build to the line; the line is the one rigc draws through the same two bones, so the tolerance is only the float floor — the largest gap the emitted (float32) bones have to it, rounded up to 6 places plus one 6-place unit — and the `face axis:` line prints it. With the line the rig stage also adds `head_up` (issue #250): a slotless bone under `head`, at head's origin, turned to the eye line + 90 degrees and as long as the eye midpoint lies from head's origin along that axis — the head's frame, which a rule that needs it reads; `head` keeps its own frame, so no key on it or under it changes meaning, and a config bone of that name is refused (`RIG_HEAD_UP_NAME_FREE`). A face bone with its own `tip` is held too (issue #258), in a second entry, `"face_tips"`, when its tip lies along the line within whole-pixel rounding — a tip written in whole pixels sits at most sqrt(2)/2 px off the point of the line it stands for, so its direction may sit up to asin((sqrt(2)/2) / length) degrees off — with its tolerance measured the same way; a tip further off is the bone's own axis, and the `face axis:` line names it with its gap and that bound. A failure is rig-c's `A51_BONES_LIE_ALONG_THEIR_DECLARED_AXIS` line, which names the bone and the fix (rig-c's `docs/AUTHORING.md` §3.7 and §5.2); with no line no entry is written and A51 reports SKIP. Every region on a turned bone is turned back, so the setup pose does not move. Any other single bone keeps world rotation 0; one whose parent is a link is turned back upright. A single bone may declare `inherit` (issue #348): what it takes from its parent's transform, one of rig-c's own mode names exactly as rig-c's table spells them — `normal`, `onlyTranslation`, `noRotationOrReflection`, `noScale`, `noScaleOrReflection` (rig-c's `RigBone.inherit`) — written to that bone in `rig.json` as declared; any other spelling, `"NoScale"` included (the runtime would fold its first letter; nothing here folds or maps), is refused (`CONFIG_BONE_INHERIT`), and a chain takes no `inherit` (`CONFIG_KEY_KNOWN`). A chain may instead declare `link_inherit` (issue #369), an object mapping its own expanded link names to those same modes, for example `"link_inherit": {"leg_r1": "noScale"}`. Only the named link changes; omitted links inherit normally. A key outside this chain is `CONFIG_NAME_RESOLVES`, with this chain's valid link names in the detail; a non-object or non-string mode is `CONFIG_FIELD_TYPE`, and another mode spelling is `CONFIG_BONE_INHERIT`. The mode is forwarded to the expanded link, or to its control under `--idle-keys ctl`, by the same rule as a single bone. This is an authored opt-in: `propose` does not add it. Its setup rotation is the turn from where rig-c's own poser puts the bone with no rotation of its own under that mode, so it still stands upright (or along its tip) at the setup pose. Where the idle gives the bone a `<bone>_ctl`, the mode goes on the control: the control is the bone the parent's rotation reaches, and the bone under it inherits normally, so the idle's keys moved onto the control still turn it. A foot that does not take its shin's rotation (`noRotationOrReflection` or `onlyTranslation`) keeps its shoe level while the leg is posed (`FEET_STAY_LEVEL`, §7); which mode is the author's. `noScale` keeps a shin or shoe's shape under a scaled parent but still takes the parent's rotation: a shoe that must also stay level needs a separate rotation constraint, for example a transform constraint from an unrotated bone. This does not change the proposed feet's existing inheritance or `FEET_STAY_LEVEL` default. An automatic mesh weighted through a bone with a mode other than `normal` gets no derived amplitude (its row names the bone) and no residual envelope (rig-c's `SKINNING_RANGE_UNSUPPORTED`). Absent, `rig.json` carries no `inherit` and no byte moves |
|
|
125
|
-
| `meshes.<part>` | rig | **proposed**, then corrected. Exactly one of `grid` (the lattice: cell size, px — what `propose` writes: by default one spacing for the figure, round(H / 37) rig px with H the height of every part's box together, a part whose tenth of its short side is already coarser keeping that, and under `propose --grid-rule part` the reference's tenth of the part's short side clamped to 5..36, issue #265), `contour` (the outline mode, authored; the next row and "A contour mesh" below) or `auto` (the automatic mode, authored; "An automatic mesh" below) — two, or none, is `CONFIG_MESH_MODE`. In every mode: `r` (added to every distance before weighting: `w = 1/(d + r)²`), `segments` (a chain name, a bone name with a `tip`, or `[bone, [x0,y0], [x1,y1]]`), and, **authored**, optional, `exponent` (issue #161): a number above 0 that replaces the 2 in that rule, `w = 1/(d + r)^exponent` — a larger one hands each vertex more fully to its nearest bone; absent is 2 and changes no byte, a value that is not a number above 0 is `CONFIG_FIELD_TYPE` at `meshes.<part>.exponent`, and a declared one is echoed as `exponent` in the mesh's `mesh_report.json` row; the exponent is the distance rule's, so declared beside `rule: "heat"` it is refused (`CONFIG_FIELD_TYPE` at `meshes.<part>.exponent`). The segment list is the one authored decision about a layer: which bones may pull it. The slot's bone is the first segment's. Optional `rule` (issue #161): `"distance"` — the rule above, and what an absent `rule` means (every byte is the same) — or `"heat"`, bone heat over the part's own silhouette, in every mode: the lattice's art (alpha above 8, less any island a declared `stray` left out) with holes filled, or for `contour` and `auto` the silhouette their outline is traced from (that mode's art — alpha above 8 for `contour`, alpha 1 and above for `auto` — less any island a declared `stray` left out, holes filled, grown by its `margin`); each bound bone's sources are the silhouette pixels whose centre lies within 0.75 px of its segment (a pixel two bones reach goes to the nearer, a tie to the first listed), held at 1 for that bone and 0 for the others; the field is solved by row-major Gauss–Seidel over-relaxation to a sweep change under 1e-7 within 20000 sweeps; a vertex reads the nearest silhouette pixel and takes the same cap and floor (and `regions`) as the distance rule; `r` is not read. The mesh's `mesh_report.json` row gains `heat` (the constants, each bone's sources and sweeps, the residual). Any other value is `CONFIG_FIELD_TYPE`; a bound bone with no source pixel is `RIG_HEAT_BONE_SOURCE`, an island no bone has a source in `RIG_HEAT_ISLAND_SOURCE`, a solve past its sweep bound `RIG_HEAT_CONVERGED` — none is weighted 0. The rule is chosen per mesh, so `RIG_HEAT_BONE_SOURCE` names three remedies: move the segment onto the art, take the bone out of `segments`, or keep this part on the distance rule — the one to take when the bone anchors the part from outside its art (a torso bone under a neck), since the first moves a bone another part placed and the second drops the anchor (issue #303). On a lattice, `RIG_HEAT_ISLAND_SOURCE` on an island that is dust — at most 4 px and at most 0.1 % of the part's art px, `mesh-draft`'s line — names `meshes.<part>.stray` and the figure that leaves it out, with the value declared; an island above that line keeps the segment remedy, a real piece being a real authoring question. In every mode the mesh's `mesh_report.json` row's `bones` names the bones the emitted model binds for the attachment — the sorted set its weights in the written `rig.json` name, so a `turn` twin (`turn_<part>_<bone>`) or a stopped link's `<link>_d` where those rebind it, never the segment bone it stands for — the same list in every mode, `remesh --delta`'s included (issue #536) |
|
|
125
|
+
| `meshes.<part>` | rig | **proposed**, then corrected. Exactly one of `grid` (the lattice: cell size, px — what `propose` writes: by default one spacing for the figure, round(H / 37) rig px with H the height of every part's box together, a part whose tenth of its short side is already coarser keeping that, and under `propose --grid-rule part` the reference's tenth of the part's short side clamped to 5..36, issue #265), `contour` (the outline mode, authored; the next row and "A contour mesh" below) or `auto` (the automatic mode, authored; "An automatic mesh" below) — two, or none, is `CONFIG_MESH_MODE`. In every mode: `r` (added to every distance before weighting: `w = 1/(d + r)²`), `segments` (a chain name, a bone name with a `tip`, or `[bone, [x0,y0], [x1,y1]]`), and, **authored**, optional, `exponent` (issue #161): a number above 0 that replaces the 2 in that rule, `w = 1/(d + r)^exponent` — a larger one hands each vertex more fully to its nearest bone; absent is 2 and changes no byte, a value that is not a number above 0 is `CONFIG_FIELD_TYPE` at `meshes.<part>.exponent`, and a declared one is echoed as `exponent` in the mesh's `mesh_report.json` row; the exponent is the distance rule's, so declared beside `rule: "heat"` it is refused (`CONFIG_FIELD_TYPE` at `meshes.<part>.exponent`). The segment list is the one authored decision about a layer: which bones may pull it. The slot's bone is the first segment's. Optional `rule` (issue #161): `"distance"` — the rule above, and what an absent `rule` means (every byte is the same) — or `"heat"`, bone heat over the part's own silhouette, in every mode: the lattice's art (alpha above 8, less any island a declared `stray` left out) with holes filled, or for `contour` and `auto` the silhouette their outline is traced from (that mode's art — alpha above 8 for `contour`, alpha 1 and above for `auto` — less any island a declared `stray` left out, holes filled, grown by its `margin`); each bound bone's sources are the silhouette pixels whose centre lies within 0.75 px of its segment (a pixel two bones reach goes to the nearer, a tie to the first listed), held at 1 for that bone and 0 for the others; the field is solved by row-major Gauss–Seidel over-relaxation to a sweep change under 1e-7 within 20000 sweeps; a vertex reads the nearest silhouette pixel and takes the same cap and floor (and `regions`) as the distance rule; `r` is not read. The mesh's `mesh_report.json` row gains `heat` (the constants, each bone's sources and sweeps, the residual). Any other value is `CONFIG_FIELD_TYPE`; a bound bone with no source pixel is `RIG_HEAT_BONE_SOURCE`, an island no bone has a source in `RIG_HEAT_ISLAND_SOURCE`, a solve past its sweep bound `RIG_HEAT_CONVERGED` — none is weighted 0. The rule is chosen per mesh, so `RIG_HEAT_BONE_SOURCE` names three remedies: move the segment onto the art, take the bone out of `segments`, or keep this part on the distance rule — the one to take when the bone anchors the part from outside its art (a torso bone under a neck), since the first moves a bone another part placed and the second drops the anchor (issue #303). On a lattice, `RIG_HEAT_ISLAND_SOURCE` on an island that is dust — at most 4 px and at most 0.1 % of the part's art px, `mesh-draft`'s line — names `meshes.<part>.stray` and the figure that leaves it out, with the value declared; an island above that line keeps the segment remedy, a real piece being a real authoring question. In every mode the mesh's `mesh_report.json` row's `bones` names the bones the emitted model binds for the attachment — the sorted set its weights in the written `rig.json` name, so a `turn` twin (`turn_<part>_<bone>`) or a stopped link's `<link>_d` where those rebind it, never the segment bone it stands for — the same list in every mode, `remesh --delta`'s included (issue #536) Optional `gather: false` keeps an exclusively bound non-segment limb rider at its authored draw position (issue #680); its binding and mesh geometry are unchanged. Remove the key for normal gathering; a non-rider is refused as `RIG_GATHER_RIDER`. |
|
|
126
126
|
| `meshes.<part>.influence` | rig | **authored**, optional (issue #378), a mode beside `grid`, `contour` and `auto`: `{cell, radius, across, max, shape, hold_tip?}`, every field but `hold_tip` required, none defaulted. rig-c's `segments` lattice over the part at `cell` px, each vertex pulled by every link of the mesh's `segments` within `radius` px of it — a pull that falls to exactly 0 at `radius` (`shape` `"linear"` or `"smooth"`), across the `segments` entries or only within the nearest one (`across`), the strongest `max` kept. The lattice and the shares are computed by rig-c's own promised functions (`buildSegmentsLattice`, `segmentDistance`, `influenceShares`), so the rule is rig-c's (its AUTHORING §3.4.7), and the mesh is written with explicit weights like every other mode. `radius` is a length on this part: the rig stage measures the farthest lattice vertex's distance to its nearest link and refuses a radius at or under it (`RIG_INFLUENCE_REACH`), naming the distance. `propose --cloth` drafts it when a recipe declares `influence` and no `radius` (issue #518): the farthest vertex's distance plus 3 of the part's lattice cells, printed on a `LINT` line with both figures. Measured on the cloth fixture and the public `wind` example (#513: 8 covered parts, `render --folds` with the physics on under wind and a hip sway of 8° and 30°): a radius just above the floor folds **more** than the lattice (one skirt went from 0 to 55 folded frames), and a larger one is **not** safer (one fringe folded again at about 3–4× its farthest distance); +2 to +6 cells read 0 on every part, +2 at the edge. That reading counted folds only; read against `check` as well (the rig as built, under the wind schedule +1 → −1 → calm, `build --environment`, the three covered `wind` parts at the same number of cells), the window that holds is **+2 to +3 cells**, and +4 is the ceiling: `wind` `bottomwear`'s `CHECK_TIP_OVER_ROOT` ratio is 1.898 on the lattice, 1.801 at +2 cells, 1.590 at +3 and **1.471 at +4**, under the floor 1.4725, so the build fails there, and 1.351 at +6 (#513, rig-parts 1.52.0, rigc 2.60.0; the lattice, +3 and +4 read again on rig-parts 1.54.0, rigc 2.60.0, the same figures, #599). The drafted +3 sits in that window, one cell under the ceiling (no radius between +3 and +4 was read), and the window is a hypothesis until a third subject — each edge rests on one part — so state `radius` in the recipe to keep your own. `r`, `exponent`, `rule`, `influences`, `stray` and `ribs` belong to the distance rule or another mode and are refused beside it (`CONFIG_INFLUENCE_MODE`). `hold_tip` (issue #615) — `true` only, or absent: the pulled shares are smoothed by the lattice's held-fork passes (the cloth recipe's `split.hold_tip` sentence below: four passes of 1-ring mesh-edge averaging, self weight 0.5, floor 0.005) capped at the declared `max`, so no vertex binds more than `max` bones; absent, the shares are rig-c's as pulled and every byte is the one written before the field existed (`false`, a second spelling of absent, is `CONFIG_FIELD_TYPE`). The mesh's `mesh_report.json` row echoes it in `influence`. `propose --cloth` writes it, with `max` raised to at least 8 (the lattice's smoothing cap), on the parts a recipe with `influence` and `split.hold_tip: true` meshes; the rig stage reads it off the mesh and never the recipe. Measured on `wind` `bottomwear` and the cloth fixture's skirt under a 60° hip sway (#615, `render --folds`, physics on): `wind` `bottomwear` folds 41 frames as drafted before the field (max 6) and **0** with `hold_tip` and max 8, against its lattice's 5; with `hold_tip` at max 6 it reads 23, and at max 8 without `hold_tip` 3; the fixture skirt (recipe given `split.hold_tip`) reads 20 before and 0 with it, against its lattice's 0, and 0 at max 8 without it. So the raised `max` carries most of the gap and the smoothing the rest on `wind` (rig-parts 1.54.0, rigc 2.60.0; a split skirt without `hold_tip` is not smoothed and reads its 44 as before). For cloth and hair that should bend as one surface across its chains |
|
|
127
127
|
| `meshes.<part>.contour` | rig | **authored**, optional (issue #84): `{tolerance, margin, spacing, maxEdge?, budget?, stray?, bridges?, regions?, bust?}`. `tolerance` — rig-c's Douglas–Peucker tolerance on the traced outline, px, 0 or more; `margin` — how far the silhouette grows before it is traced, px: 0, or 1 or more (a pixel joins when its centre lies within `margin` of an art pixel's centre; a value above 0 and below 1 adds nothing and is refused, `CONFIG_FIELD_TYPE`); `spacing` — the background interior spacing, px, above 0; `maxEdge` (issue #265) — the longest outline edge, px, above 0: every simplified edge longer than it is cut into `ceil(length / maxEdge)` equal pieces, each cut point on the 1/256 px grid, before any region or rib touches the outline (absent: nothing is cut, and no byte moves; under 2/256 px the rig stage refuses it, `CONTOUR_PARAMETER`, because two cut points could snap together); the row echoes it in `params` and counts the points it added in `contour.outlineCut`, both only when declared; `budget` — the most vertices the mesh may have (refused above it, nothing thinned); `stray` — the largest island, in art pixels, that may be left out of the mesh (absent: none is); `bridges` (issue #326) — `true`, its one value: islands are read in this order — **dust first** (those `stray` leaves out), **then faint islands** (every pixel's alpha under 64, a quarter of full opacity: left out the same way, their pixels kept in the image but not meshed, so not drawn, and named in the row's `contour.bridges.faint` with their px, brightest alpha and box), **then every visible island is meshed and bridged, whatever the bridge costs** — overdraw is reported, never a reason to drop art; the largest island, or a tie for it, is never left out, faint or not: dropping it would draft the part without its art, and a part whose main body is faint is a question about the layer, which the plan and the author own, not one for the mesh — and the pieces are joined into the one outline rig-c takes by bridges — the kept islands, holes filled, grow together by `margin`, so islands closer than about twice the margin are one grown silhouette, traced as one; each silhouette is traced, simplified, capped, refined and triangulated as a one-island mesh is; then, starting from the silhouette with the most art, the nearest pair of a vertex on the joined outline and one on a silhouette still apart whose quad holds (wound as the mesh, crossing no outline, holding no other vertex, one closed outline after) is joined by that quad, two triangles over no art, until none is apart. Coverage and overshoot read the silhouettes' triangles; a bridge's area is in `meshArea` and in the row's `contour.bridges` (`islands`, `units`, and per join `unit`, `span` — its two crossing edges, px — `area`, `vertices`, `pair`; and `faint`, only when an island was left out as faint), and the row's `params` echoes `bridges`, both only when declared; `art_coverage` counts a faint island's pixels as art not covered. Absent, a second island is refused as below and no byte moves; on one island it writes the mesh the undeclared entry writes. Any other value is `CONFIG_FIELD_TYPE`; beside `ribs` it is `CONTOUR_PARAMETER` (a rib runs across one outline); a join no pair makes is `CONTOUR_BRIDGE`. A bridge stretches with whatever pulls its two ends apart, so it belongs on a part whose pieces ride one bone — the only case `mesh-draft` drafts; a bridge adds no vertex (issue #570): its four corners, `contour.bridges.joins[].vertices`, are outline vertices of the two silhouettes it joins, and they are weighted as every vertex of the mesh is, by distance to every bone the mesh's `segments` name — no step of the weighting reads which island a vertex lies on, so where two islands ride two bones (two legs in one `legwear` on `leg_r` and `leg_l`) each island's vertices, the corners among them, take weight from the other island's bones too (selftest `CW100`: on its fixture the left island's two corners each take 0.35821 from the right island's bone, and none of its vertices less than 0.30431), and a part whose pieces must not pull each other is split into one part per piece; `regions` — local deformation regions, each `{name, shape, bone, spacing, band}` with `shape` `"circle"` (`cx, cy, r`) or `"polygon"` (`points`, 3 or more): `bone` is the region's control bone (any bone `bones` declares), `spacing` the interior spacing inside the region and its band, `band` the width the bone's weight falls across. Every length and position is **rig px**, like every other in the config; the part image is the rig less `(x − 4, y − 4)` (its box less the pad), a translation, so a length is the same number in both. A region's `cx`, `cy`, `r`, `band` and `points` are multiples of 1/256 px (`CONFIG_FIELD_TYPE` otherwise); region names are unique per mesh (`CONFIG_REGION_NAME_UNIQUE`). `bust` (issue #475) — `{apex_r, apex_l, cleavage, alpha?: 0.22, clearance?: 3.8, bone_r?: "boob_r", bone_l?: "boob_l", spacing?: 14}`: derives the two circular regions `bust_r` and `bust_l` from the three rig-px landmarks `apex_r`, `apex_l` and `cleavage` (multiples of 1/256 px, `CONFIG_FIELD_TYPE` otherwise; projecting the torso midline `neck → chest → hip` onto `apex_r → apex_l` misses the cleavage by 14–93 px across all five calibrated 3/4-yaw characters, so all three points are required). With `d_s = \|cleavage − apex_s\|` and `D = \|apex_r − apex_l\|`, each side `s ∈ {r, l}` is placed at `cx = apex_s[0]`, `cy = apex_s[1]` with outer radius `R_s = d_s − clearance`, core radius `r_s = round(alpha × R_s)` and `band_s = round(R_s) − r_s` (`alpha` = 0.22, `clearance` = 3.8 px, `spacing` = 14 px, `bone_r` = `"boob_r"`, `bone_l` = `"boob_l"` by default, reproducing the five calibrated example characters within `<= 6 px`, max `\|ΔR\| = 5 px`, max `\|Δr\| = 3 px`). Refused when `clearance <= 0`, `R_r + R_l >= D`, or a derived `r_s` or `band_s` is not positive (`CONFIG_BUST_CLEARANCE`), when `bone_r` or `bone_l` is not declared in `bones` (`CONFIG_NAME_RESOLVES`), or when `contour.regions` also names `bust_r` or `bust_l` (`CONFIG_REGION_NAME_UNIQUE`). Both `propose` and `rig` read `contour.bust` through `contourRegionsOf` (`deriveBustRegions`), and hand-written `contour.regions` entries build byte-identically when `bust` is absent. The alpha threshold is not a field: art is alpha above 8, the lattice's and `check`'s |
|
|
128
128
|
| `meshes.<part>.ribs` | rig | **authored**, optional (issue #188), in the `contour` and `auto` modes: `{<chain>: {stations}, …}`, each key a chain this mesh's `segments` name. Each link of the chain gets a row of vertices across the part at its origin and at `stations` points evenly between its origin and its end (`stations`, a whole number, 0 or more, required; a chain of L links carries L × (stations + 1) ribs), each rib a row of vertices across the part, kept as a row of locked edges; the rule is "Ribs along a chain" under "A contour mesh". Absent places none and changes no byte. Refused: a lattice mesh with ribs (`CONFIG_RIBS_MODE` — its vertices are its grid's corners), a key that is not one of the mesh's chains (`CONFIG_NAME_RESOLVES`), an object naming no chain or a `stations` that is not a whole number from 0 (`CONFIG_FIELD_TYPE`); at the rig stage `CONTOUR_RIB_ART`, `CONTOUR_RIB_LINK`, `CONTOUR_RIB_CROSSING`, `CONTOUR_RIB_EDGE` (the contour refusals). The mesh's `mesh_report.json` row gains `ribs` — the declaration, the ribs placed and the vertices they hold — and its contour report (the source's, in `auto`) lists each rib's vertices |
|
|
129
129
|
| `meshes.<part>.influences` | rig | **authored**, optional (issue #284), in the `grid` and `contour` modes: `{maxInfluences?, floor?}`, at least one. `maxInfluences` — the most bones that pull one vertex, a whole number 1 or more, or `null`, no cap (every bone the mesh's `segments` name; `null` is the config's spelling of a bound declared absent, as in `maxOvershoot` and `weightJump`); absent is 4. `floor` — `"cut"` (the capped shares normalised, any under 0.03 dropped, the rest normalised again; what an absent `floor` means) or `"continuous"` (0.03 subtracted from every capped share, those at or below 0 dropped, the rest normalised again, so a bone fades out of a vertex instead of leaving it in one step). Absent, the mesh is weighted at 4 and the cut and every byte is the one written before the field existed; declared, it applies under either `rule`, and is echoed as `influences` in the mesh's `mesh_report.json` row. `propose` never writes it, and `mesh-draft` carries a lattice's declaration to the contour candidate it drafts. A cap that is not a whole number 1 or more or `null` (the string `"none"` included), another `floor`, or an object naming neither is `CONFIG_FIELD_TYPE`; a vertex the declared cut leaves with no bone is `RIG_INFLUENCES_KEPT`; beside `auto` it is `CONFIG_INFLUENCES_MODE` (that mode's cap and floor are `auto.influences`). What each setting trades is "The weight cut" below |
|
|
130
130
|
| `meshes.<part>.stray` | rig | **authored**, optional (issue #303), in the `grid` mode: the largest island, in art pixels, that may be left out of the lattice — the contour mode's `contour.stray`, with the same meaning, over the same islands (the 4-connected islands of the art, alpha above 8): every island of `stray` art px or fewer is cleared from the art the lattice and, under `rule: "heat"`, its silhouette are built over, except an island as large as the largest, which is never left out (two equal largest pieces both stay). Unlike the contour mode an island above the figure is not refused — the lattice bridges every island it keeps, as it always has. An island that sits in a cell the lattice keeps for other art leaves the lattice unchanged: there `stray` changes only the silhouette `rule: "heat"` reads, and gives back no triangle (demo `bottomwear`'s 2 px island, in the cell kept for the hem's tip, is that case). Absent, nothing is left out and every byte is the one written before the field existed; a figure that leaves nothing out changes no byte of `rig.json` or `motion.json`. The part's image is not touched: a pixel left out stays in it, and is drawn only where a cell kept for other art happens to cover it; `art_coverage` is over all the art, the islands left out included. Declared, the mesh's `mesh_report.json` row echoes `stray` and adds `stray_cleared` (`islands`, `pixels`, `art_pixels`, after `influences`), and the rig stage's mesh line ends `stray <n> left out <i> island(s), <p> of <a> art px`. A value that is not a whole number from 0 is `CONFIG_FIELD_TYPE`; beside `contour` or `auto` it is `CONFIG_STRAY_MODE` (those modes state it in `contour.stray` and `auto.source.stray`). `propose` and `mesh-draft` never write it |
|
|
131
|
-
| `regions.<part>` | rig | **proposed**: the bone a rigid part rides. Every plan part is exactly one of a mesh or a region (`CONFIG_PART_ATTACHED`) |
|
|
131
|
+
| `regions.<part>` | rig | **proposed**: the bone a rigid part rides. Every plan part is exactly one of a mesh or a region (`CONFIG_PART_ATTACHED`) Also accepts `{bone, gather?}`: `bone` is the same required bone name and `gather: false` keeps an exclusive non-segment limb rider at its authored draw position without changing its binding (issue #680). Remove `gather` for normal gathering; other values are refused and a non-rider is `RIG_GATHER_RIDER`. |
|
|
132
132
|
| `motion.duration` | rig; check (the loop is measured at this time) | proposed as 40 frames at 12 fps, `40/12` s, written `3.3333333333333335` (issue #252; the reference proposed 4 s, and every period it drafted is scaled with it so each track keeps its cycles per idle); a whole number of 1/12 s ticks, because `check` renders at 12 fps and compares frame 0 with the frame at this time — read within 10^-9 s (`TIME_SLACK`, issue #244), since a whole number of frames is often not exact in binary: rigc's 40th frame sits at `40 × (1/12)` = `3.333333333333333`. Half a frame off is `CHECK_LOOP_LAST_FRAME_AT_DURATION` |
|
|
133
133
|
| `motion.tracks` | rig | **proposed**, then tuned. Single `{bone, prop, amp, period, phase, base?}` or chain `{chain, amps, period, phase, lag}` — one amplitude per link, link `i` at phase `phase + lag·i`. Every `period` must divide `duration` (`CONFIG_PERIOD_DIVIDES_DURATION`). A bone property is keyed by one track (`CONFIG_BONE_PROPERTY_KEYED_ONCE`): a chain keys `rotate` on every link, the blink's `eyes` group `scaley` and its `brows` group `translatey` on every member, so a single track on any of those is a second track on it — rigc would refuse it one stage later, `animation "idle" has two tracks on eye.scaley`. The proposed breath (issues #252, #270) is `chest` `translatey` travelling 2.5 % of the torso's length peak to peak — the distance from the `neck` bone to the `hip` bone as the proposal writes them, the run the chest sits half way along, whichever rule placed them — (amplitude half of it to two decimals, `base` the amplitude, so the chest rises from the setup pose and returns); the `breath:` note prints the fraction, the length, the two bones and the pixels. Until #270 it was 2.5 % of the `topwear` part's height, and a sweater to the thighs (`scarf`, 690 px) breathed 2.9 times as deep as `demo`; on neck → hip `scarf` reads 431 px (10.78 px) and `demo` 192 px (4.80 px). Neck and hip on one point: no length to scale by, so the breath keeps the reference's amplitude 1.3 (2.6 px peak to peak) and the note says so — scale it to the figure. `chest` `scalex` and the `head` and `neck` rolls are a ratio and angles and are proposed the same on every figure. A chain link is turned along its chain (the `bones` row), so a `translatex`/`translatey` key on a bone whose parent is a turned link, or a `scale`/`shear` key on a turned link, would move or stretch along the link and not along the picture's axis: the rig stage refuses it (`RIG_KEY_FRAME_UNTURNED`); `rotate` is keyed on any bone |
|
|
134
134
|
| `motion.blink` | rig | **proposed**: `{t, eyes, brows, squash, brow_drop}`; the whole blink, `t` to `t + 0.364` s (`t + 0.314` s without brows: the brows' keys are the ones that end last), must fit inside the idle (`RIG_BLINK_INSIDE_IDLE`). The `eyes` group's `scaley` squashes every part on the eye bones about the bone's origin, the eyewhite's centre. Optional: a figure with no `eyewhite-r`/`-l` part has no eye bone, so `propose` writes no `blink` and notes `no blink: no eyewhite part (looked for: eyewhite-r, eyewhite-l), …`; with eyes and no `eyebrow-r`/`-l` part it writes the blink without `brows` and `brow_drop` and notes `blink without brows: …`. `brows` and `brow_drop` are stated together or not at all (`CONFIG_BLINK_BROWS_PAIRED`), and a group that names no bone is refused (`CONFIG_BLINK_GROUP_MEMBERS`) — rigc would refuse it one stage later, `group "eyes" declares no members` — as is a group that names one bone twice (`CONFIG_BLINK_GROUP_UNIQUE`; rigc: `group "eyes" names member "eye" twice`). An `irides-*` or `eyelash-*` part on a side with no eyewhite has no eye bone to ride: `propose` places it on `head` as a region, which the blink does not move, and notes `no eyewhite part for eye_r (looked for: eyewhite-r): iris (head:irides-r) is placed on head as a region, …`. The timing is fixed, not a field (table below) |
|
|
@@ -142,6 +142,19 @@ read by no CPU stage).
|
|
|
142
142
|
| `proposed_rig_scale` | assemble, rig, build, `propose --from-config`/`--compare` | **proposed** by `propose` (issue #354): `parts.json`'s `scale_rig_per_source`, the `assemble.rig_scale` the rig sections (`bones`, `meshes`, `limbs`, `motion`) were drafted at. Held equal to `assemble.rig_scale` when present (`CONFIG_PROPOSED_RIG_SCALE`; 0, negative or not a number: `CONFIG_FIELD_TYPE`). Absent on a hand-authored config, where no byte of any output moves |
|
|
143
143
|
| `requirements` | build (read in place of `--requirements` when the flag is not given), and so its check | **authored**, optional, never proposed (issue #556): a path, relative to the config file's directory, to the `spine-parts-requirements/1` file the build's check reads (§7, *Declared requirements*) — so a rig that needs one (a `not_swinging` part, a `may_fold`) rebuilds from its config alone. `build` reads it before assemble, as it reads the flag's file, and `check.json`'s `requirements.file` records it with `path` as declared. Given beside `--requirements`, the two must name the same file once resolved, or a file of the same bytes, and the declaration is read and recorded (a build given both writes what the config alone writes); otherwise `BUILD_REQUIREMENTS_CONFLICT`, naming both. Not a non-empty string: `CONFIG_FIELD_TYPE`; no such file, where the config is read from a path: `CONFIG_FILE_PRESENT`. `check`, `compose`, `mesh-draft`, `remesh` and `retune` do not read it: their `--requirements` is the only door. Absent, nothing is read and no byte of any output moves |
|
|
144
144
|
|
|
145
|
+
A skeleton alternate may declare `anchor: {neck: "head"}` (issue #543):
|
|
146
|
+
one or two body-18 keypoints mapped to declared base-bone origins, in rig pixels.
|
|
147
|
+
One pair reads offset with scale held at 1; two read scale and offset without
|
|
148
|
+
rotation, in canonical keypoint order. The existing registration bars stay
|
|
149
|
+
1 rig pixel for offset and 1 % for scale. `sets.json.registration` records the
|
|
150
|
+
result; an offset or scale over the bar refuses with
|
|
151
|
+
`ASSEMBLE_ALT_SKELETON_REGISTERED` and the required transform. No painting pixels
|
|
152
|
+
are resized or moved. With no `anchor`, the existing torso registration is
|
|
153
|
+
unchanged, including its refusal when a torso end has no declared bone.
|
|
154
|
+
The loader requires `skeleton`, one or two known keypoints, and known bone names
|
|
155
|
+
(`CONFIG_FIELD_PRESENT`, `CONFIG_FIELD_TYPE`, `CONFIG_KEY_KNOWN`,
|
|
156
|
+
`CONFIG_NAME_RESOLVES`).
|
|
157
|
+
|
|
145
158
|
**One drawing, one band; beyond it, another drawing (issue #472).** A single front-facing
|
|
146
159
|
`face` plate has one painted outline, one nose ridge, and two eyes in front-view topology.
|
|
147
160
|
Within the rated single-plate band (`FACE_RATED_BAND`: `yaw ±15°`, `pitch ±12°`),
|
|
@@ -536,6 +549,39 @@ top edge instead would close the eye upward onto the upper lid and still move wh
|
|
|
536
549
|
above it by (1 − squash) × its height above the pivot, so the cut, not the pivot, is what
|
|
537
550
|
holds the crease.
|
|
538
551
|
|
|
552
|
+
### Alternate part layers (`assemble.alternates[i].layers`, issue #666)
|
|
553
|
+
|
|
554
|
+
A gesture run may hold a raised arm only in a layer the author added, while
|
|
555
|
+
`handwear-r` holds an incorrect hanging arm. Select the author layer for each
|
|
556
|
+
covered output part without replacing the run's tag PNG or changing the base plan:
|
|
557
|
+
|
|
558
|
+
```json
|
|
559
|
+
"layers": {"upperarm_r": "author:raised", "forearm_r": "author:raised"}
|
|
560
|
+
```
|
|
561
|
+
|
|
562
|
+
Keys are output part names in this set's coverage, excluding `hides`; a limb
|
|
563
|
+
uses its segment part names, not the consumed unsplit plan name. Values use the
|
|
564
|
+
same layer-name grammar as the plan: a See-through tag or `author:<label>`.
|
|
565
|
+
The run (`full` or `head`) remains the source part's planned run; a single-run
|
|
566
|
+
set takes `full`. A missing or empty selected layer is
|
|
567
|
+
`ASSEMBLE_ALT_INPUT_PRESENT`, naming the set and layer. An unknown or hidden
|
|
568
|
+
part is `CONFIG_SET_LAYERS`; an invalid layer name is `CONFIG_TAG_KNOWN`.
|
|
569
|
+
A painting patch has no run layer and cannot be a selection target; use a
|
|
570
|
+
layer-backed plan part. A cut-backed part extracts its polygon from its own
|
|
571
|
+
selected layer. The same polygon is subtracted from the parent's own selected
|
|
572
|
+
layer, retaining its overlap band and applying any `under` there using the
|
|
573
|
+
removed parent's pixels. Selecting a piece never changes its parent's layer
|
|
574
|
+
or output name, including when only the parent selects another layer.
|
|
575
|
+
|
|
576
|
+
Each limb segment reads its own selection, including when adjacent segments
|
|
577
|
+
select different layers. The joint bounds remain those of their original logical
|
|
578
|
+
source: selecting a full-arm author layer for the forearm does not emit the whole
|
|
579
|
+
arm as the forearm. Caps, island ownership and base-cover exclusions run on the
|
|
580
|
+
selected pixels with their existing rules and thresholds. `parts.json` records
|
|
581
|
+
`full:author:raised` (or the selected head layer) in each selected part's `from`;
|
|
582
|
+
no layer is relabelled as See-through output. With `layers` absent or `{}`, the
|
|
583
|
+
assembly keeps its previous bytes.
|
|
584
|
+
|
|
539
585
|
### Explicit alternate endpoints (`assemble.alternates[i].tips`, issue #652)
|
|
540
586
|
|
|
541
587
|
An alternate may declare a non-empty map of bone names to `[x, y]` endpoints:
|
|
@@ -614,7 +660,8 @@ the torso.
|
|
|
614
660
|
**Assembled order and final rig slot order are distinct** (issue #646). Assembly keeps
|
|
615
661
|
`parts.json` and its recomposite in the authored part order, including each patch's
|
|
616
662
|
`draw`. At rig time, each declared limb gathers its exclusively bound rider slots
|
|
617
|
-
locally into its existing segment block
|
|
663
|
+
locally into its existing segment block, unless its own `regions` or `meshes`
|
|
664
|
+
entry declares `gather: false` (issue #680). The block's anchor is its first segment
|
|
618
665
|
slot in the original setup draw order; block-anchor order and each limb's owned
|
|
619
666
|
slots' internal relative order are stable. This applies to every declared limb,
|
|
620
667
|
without inferring an anatomical pair or a torso target. A front painting patch
|
|
@@ -631,6 +678,23 @@ whose pixels overlap them, so setup RGBA equality must be measured on the author
|
|
|
631
678
|
input. Public generated setup comparisons are evidence for those inputs, not a
|
|
632
679
|
universal promise that all art keeps its compositing order.
|
|
633
680
|
|
|
681
|
+
An exclusive rider may keep its authored draw position while still following the
|
|
682
|
+
limb: write `"shawl": {"bone": "drape0", "gather": false}` in `regions`, or
|
|
683
|
+
`"gather": false` beside a mesh's existing fields. This excludes that part's slot
|
|
684
|
+
family from gathering and from a limb layout's inherited riders, including mesh
|
|
685
|
+
replay. It does not change the bone binding, weights, transforms, art, or the
|
|
686
|
+
shared-target layout rule. A named part targeted explicitly by a layout still
|
|
687
|
+
serves as that declared target. With no key, every existing gathering rule and
|
|
688
|
+
output byte is unchanged; a region may still use its historical bone string.
|
|
689
|
+
Only `false` is admitted; remove the key for normal gathering.
|
|
690
|
+
|
|
691
|
+
| rule | Found | Required |
|
|
692
|
+
| --- | --- | --- |
|
|
693
|
+
| <a id="RIG_GATHER_RIDER"></a>`RIG_GATHER_RIDER` | An opt-out on a declared limb segment, a part outside the limbs, or a nonexclusive/unbound part | Remove `gather` or bind a non-segment rider exclusively to one declared limb; actual base and alternate attachment bindings must all belong to that limb, reading every listed mesh weight reference, even zero weights |
|
|
694
|
+
|
|
695
|
+
Generated still pieces keep their authored family position; they do not acquire
|
|
696
|
+
a new binding.
|
|
697
|
+
|
|
634
698
|
**Explicit adjacency** (issue #647) is optional and takes effect at **rig time**,
|
|
635
699
|
after every base and alternate attachment has been built. For example, on an
|
|
636
700
|
existing limb named `unit_a`:
|
|
@@ -695,6 +759,9 @@ and a config without `limbs` builds as it always did. Then `assemble` with the b
|
|
|
695
759
|
layers, as follows; every step is arithmetic on the declared bones and the layer's pixels
|
|
696
760
|
(`src/limbs.ts`):
|
|
697
761
|
|
|
762
|
+
For an alternate with `layers`, these same steps read each segment's selected
|
|
763
|
+
layer; the original logical source still determines its joint cut bounds.
|
|
764
|
+
|
|
698
765
|
- **Which limb.** A part a limb takes (`from`) goes wholly to the limbs that take it. With two —
|
|
699
766
|
See-through's one `legwear` holding both legs — each pixel goes to the limb whose polyline (its
|
|
700
767
|
bones' origins in order, then the last bone's end) passes nearest the pixel's centre, a tie to
|
|
@@ -930,6 +997,13 @@ and drawn on by a set that names the part in its own `front`:
|
|
|
930
997
|
family; then only the set's #587 exclusion and recomposite figures read the
|
|
931
998
|
parts order, and the render and its seam bar follow the rig.
|
|
932
999
|
|
|
1000
|
+
Two alternative runtime sets may register different attachments on the same
|
|
1001
|
+
front slot, one attachment per set. This is allowed registration, not concurrent
|
|
1002
|
+
activation: the current player's `setSet(name)` clears the previous selection,
|
|
1003
|
+
and `setSets(names)` rejects overlapping touched slots. Existing same-set
|
|
1004
|
+
base-plus-front and keyed-front refusals still apply. This states the producer
|
|
1005
|
+
and player-source selection contracts, not a newly executed playback test.
|
|
1006
|
+
|
|
933
1007
|
### The weight cut (`meshes.<part>.influences`, issue #284)
|
|
934
1008
|
|
|
935
1009
|
This section and the mesh sections after it are for parts with no joints; a limb is cut at
|
|
@@ -1092,6 +1166,12 @@ holes), `grownPixels` (added by the margin), `pinchFilledPixels` (added by the p
|
|
|
1092
1166
|
`grownHolePixels` (transparent pixels the grown silhouette encloses — a notch whose mouth grew
|
|
1093
1167
|
shut))
|
|
1094
1168
|
and, per region, the vertices its bone reaches (`g > 0`) and holds alone (`g = 1`).
|
|
1169
|
+
Across contour, automatic and influence reports, `regions[].bone` and `reach.nearest`
|
|
1170
|
+
name the authored template bones used to calculate the regions and reach. Stops and turn
|
|
1171
|
+
can rebind the emitted attachment after those calculations; these diagnostic names are
|
|
1172
|
+
not rewritten. The row's `bones` lists the final attachment bindings after rebinding.
|
|
1173
|
+
Use that list (or the emitted attachment), rather than a region or reach name, when
|
|
1174
|
+
resolving the bones the resulting rig actually binds (issue #560).
|
|
1095
1175
|
`art_coverage` is over all the part's art, stray islands included (in the automatic mode it is
|
|
1096
1176
|
not: there the islands `source.stray` leaves out are cleared from every reader's art, see
|
|
1097
1177
|
`source.stray` below). A lattice mesh's row is
|
|
@@ -1658,7 +1738,7 @@ same shape over the face bones, and `examples/demo/animations.json` holds seven
|
|
|
1658
1738
|
"animations": {
|
|
1659
1739
|
"sway": { "duration": 2, "loop": true, "tracks": [
|
|
1660
1740
|
{ "bone": "chest", "property": "rotate", "keys": [
|
|
1661
|
-
{ "t": 0, "v": [0] }, { "t": 0.5, "v": [3] }, { "t": 1.5, "v": [-3] }, { "t": 2, "v": [0] } ] },
|
|
1741
|
+
{ "t": 0, "v": [0], "curve": [0.15, 0, 0.35, 3] }, { "t": 0.5, "v": [3] }, { "t": 1.5, "v": [-3] }, { "t": 2, "v": [0] } ] },
|
|
1662
1742
|
{ "bone": "head", "property": "rotate", "keys": [
|
|
1663
1743
|
{ "t": 0, "v": [0] }, { "t": 1, "v": [-2] }, { "t": 2, "v": [0] } ] } ] } } }
|
|
1664
1744
|
```
|
|
@@ -1667,6 +1747,14 @@ same shape over the face bones, and `examples/demo/animations.json` holds seven
|
|
|
1667
1747
|
`CONFIG_FIELD_PRESENT: config.motion.animations_from (<file>).spec — is absent and required:
|
|
1668
1748
|
write "spec": "rigc-motion/1" beside "animations", …`, and another value is `CONFIG_FIELD_TYPE`
|
|
1669
1749
|
naming the value found and `"rigc-motion/1"`.
|
|
1750
|
+
- **Keys keep rig-c's motion fields, including `curve`.** The loader carries the named
|
|
1751
|
+
animations as written; rig-c gates them, as it gates this example in selftest `CF514`.
|
|
1752
|
+
[The core key format](https://github.com/rig-c/core/blob/main/docs/AUTHORING.md#45-keys--times-values-curves)
|
|
1753
|
+
defines `curve` as four numbers per value channel: absolute control-point
|
|
1754
|
+
`[time, value, time, value]`, not normalized graph handles. The first chest key above
|
|
1755
|
+
shapes its span to the next key. A key carries `ease` or `curve`, never both, and
|
|
1756
|
+
the final key carries neither. Top-level motion fields are a separate contract:
|
|
1757
|
+
`animations_from` supplies `spec` and `animations`, not a second setup or easing table.
|
|
1670
1758
|
- **Key times strictly increase within a track, and the last is at `duration`** — rig-c's rule
|
|
1671
1759
|
(its AUTHORING §4.5, "`t` is in seconds and must strictly increase"; R7: no key past the
|
|
1672
1760
|
declared duration, and a duration more than a frame longer than the last key is refused).
|
|
@@ -1675,8 +1763,9 @@ same shape over the face bones, and `examples/demo/animations.json` holds seven
|
|
|
1675
1763
|
close the loop without a jump give it the value of the key at `t = 0`, as both tracks above do.
|
|
1676
1764
|
Writing that boundary key twice (`t: 2` and `t: 2` here) is a duplicate time, and it is rigc's
|
|
1677
1765
|
verdict at the rig stage's gate, not this loader's: `RIG_RIGC_GREEN` quotes rigc's
|
|
1678
|
-
`CE_COMPILE_KEY_TIMES_NOT_INCREASING` line
|
|
1679
|
-
times must strictly increase
|
|
1766
|
+
`CE_COMPILE_KEY_TIMES_NOT_INCREASING` line. In rig-c 2.69.0 this example prints
|
|
1767
|
+
`animation "sway" bone "head" rotate: key times must strictly increase — key 3 at t=2 does not come after key 2 at t=2 (keys counted from 0)`.
|
|
1768
|
+
That line names the animation, the track and both key times,
|
|
1680
1769
|
and the file it came from is the one the rig stage's line just above it names
|
|
1681
1770
|
(`animations beside the idle, from <file> as written: …`) — rigc reads the merged `motion.json`
|
|
1682
1771
|
in a scratch directory, so its own path is not yours. Remove the second key.
|
|
@@ -1895,6 +1984,55 @@ and the total, `mesh-stats: total 1908 triangles over 6 mesh(es)`, the counts th
|
|
|
1895
1984
|
`mesh_report.json` will hold (§4, *Counting the triangles before a build*). On `reference-sample`
|
|
1896
1985
|
it runs in under a second; the build it saves runs the render and `check` as well.
|
|
1897
1986
|
|
|
1987
|
+
**Choose region spacing against the triangle budget.** Interior grid density grows
|
|
1988
|
+
roughly as area / spacing², including the transition band: for a circle that area
|
|
1989
|
+
extends to `r + band`, not just `r`. The outline, background grid and sampled region
|
|
1990
|
+
rings also contribute, so multiplying the *whole* triangle count by that ratio
|
|
1991
|
+
incorrectly scales the fixed part. Read the part's `mesh_report.json` row first, and use
|
|
1992
|
+
`mesh-stats` for the candidate rather than waiting for a rendered build.
|
|
1993
|
+
|
|
1994
|
+
A bounded calibration on the public [family office config](https://github.com/rig-c/examples/blob/d5a1768ce4a2d1e3f5726d1739cd0da4a63b0e13/family/roa/config.json)
|
|
1995
|
+
uses both `topwear` bust regions at spacing 14. Its pinned
|
|
1996
|
+
[mesh report](https://github.com/rig-c/examples/blob/d5a1768ce4a2d1e3f5726d1739cd0da4a63b0e13/family/roa/out/rig/mesh_report.json)
|
|
1997
|
+
has 500 vertices, 883 triangles, 115 hull vertices, 53 background interior vertices
|
|
1998
|
+
and 332 regional interior vertices. For this topology, `T = 2V - H - 2`; separating
|
|
1999
|
+
those contributions gives `T_fixed = 2(115 + 53) - 115 - 2 = 219` and a regional
|
|
2000
|
+
term of `2 × 332 = 664`. Freeze the local estimate before trying other spacings:
|
|
2001
|
+
|
|
2002
|
+
`T_est(s) = 219 + 664 × (14 / s)²`
|
|
2003
|
+
|
|
2004
|
+
Measured with Bun 1.4.2 and rig-c 2.60.0, changing **only both region spacings** in
|
|
2005
|
+
that pinned config, through the same `mesh-stats` reader (no repair application):
|
|
2006
|
+
|
|
2007
|
+
| Region spacing (px) | Estimated triangles | Actual triangles | Absolute relative error |
|
|
2008
|
+
| --- | ---: | ---: | ---: |
|
|
2009
|
+
| 14 (calibration) | 883.00 | 883 | 0% |
|
|
2010
|
+
| 10 | 1520.44 | 1470 | 3.43% |
|
|
2011
|
+
| 18 | 620.68 | 624 | 0.53% |
|
|
2012
|
+
| 22 | 487.89 | 491 | 0.63% |
|
|
2013
|
+
|
|
2014
|
+
The three held-out spacings stayed within 15%; this is a local planning rule,
|
|
2015
|
+
not a guarantee for another silhouette, band, overlap or meshing mode. Ring samples
|
|
2016
|
+
scale with perimeter / spacing, and point rejection and boundary splits change the
|
|
2017
|
+
counts too. Recalibrate when those inputs change; do not refit the estimate to the
|
|
2018
|
+
same points and call them validation.
|
|
2019
|
+
|
|
2020
|
+
For a per-mesh budget `B > T_fixed`, start at
|
|
2021
|
+
`s >= s0 × sqrt((T0 - T_fixed) / (B - T_fixed))`, then count the candidate.
|
|
2022
|
+
An author choosing 700 triangles here gets about 16.45 px; spacing 18 actually
|
|
2023
|
+
counts 624. If `B <= T_fixed`, coarsening the soft region alone is not the remedy.
|
|
2024
|
+
Core's `A13_MESH_BUDGET` reads
|
|
2025
|
+
[`invariants.meshTriangles`](https://github.com/rig-c/core/blob/main/docs/AUTHORING.md#37-invariants--what-the-artifact-cannot-say-about-itself)
|
|
2026
|
+
from the rig spec; this is not an additional parts-config field, and a dry count
|
|
2027
|
+
is not a compiler or appearance verdict. Use the actual count for the budget decision.
|
|
2028
|
+
|
|
2029
|
+
To repeat the table, check out that public example pin, copy its config to
|
|
2030
|
+
`work/spacing18.json`, change both
|
|
2031
|
+
`meshes.topwear.contour.regions[].spacing` values to 18, and run from the example
|
|
2032
|
+
repository root (repeat with 10, 14 and 22):
|
|
2033
|
+
|
|
2034
|
+
`rig-parts mesh-stats --config work/spacing18.json --parts family/roa/out`
|
|
2035
|
+
|
|
1898
2036
|
`build` on `reference-sample` as tracked (PR #187; the values above are the ones tuned for its `hop`, issue #183):
|
|
1899
2037
|
|
|
1900
2038
|
```
|
|
@@ -2501,6 +2639,13 @@ the fields the block holds, and a missing `assemble.plan` names
|
|
|
2501
2639
|
`assemble --propose-plan`, which prints one. `build` runs `rig`, so it asks the
|
|
2502
2640
|
full loader before its assemble stage writes anything.
|
|
2503
2641
|
|
|
2642
|
+
`comfy paint` records each seed in `painting_<seed>_meta.json` beside the PNG:
|
|
2643
|
+
|
|
2644
|
+
| meta field | what the graph used |
|
|
2645
|
+
| --- | --- |
|
|
2646
|
+
| `checkpoint`, `loras`, `sampler` | the selected checkpoint and resolved LoRA and sampler fields |
|
|
2647
|
+
| `upscale` | `{ model, then }`: `UPSCALE_MODEL` and `UPSCALE_THEN` from `src/graphs.ts`, the model loader and subsequent scale factor (issue #698); automatic model selection is unchanged |
|
|
2648
|
+
|
|
2504
2649
|
0. **The painting (optional).** `rig-parts comfy paint --config config.json --out inputs --host <url>`
|
|
2505
2650
|
generates `painting_<seed>.png` on a ComfyUI box; any other route to a painting
|
|
2506
2651
|
skips this step and leaves `generation` out. Config: the `paint` row.
|
|
@@ -2888,7 +3033,7 @@ valued destination path. Its modes have different ownership:
|
|
|
2888
3033
|
| `propose --head-box` | existing regular config | `seethrough.head_box` |
|
|
2889
3034
|
| `assemble --propose-plan` | existing regular config; must name `--config` itself | `assemble.plan`, `assemble.extend_below_crop` |
|
|
2890
3035
|
| ordinary `propose --parts` without `--cloth` | existing regular config | each present `PROPOSAL_CONFIG_SECTIONS` value: `bones`, `meshes`, `regions`, `limbs`, `motion`, `constraints`, `turn`, `proposed_rig_scale` |
|
|
2891
|
-
| ordinary `propose --parts … --only-missing` (
|
|
3036
|
+
| ordinary `propose --parts … --only-missing` (issues #671, #679) | existing regular config | only resolvable `meshes.<part>` or `regions.<part>` for an unattached part: attached covers existing `meshes` and `regions`, source parts consumed by the config's own `limbs.<name>.segments[].from`, and `assemble.patches` (always regions), with or without `--keypoints`. Entries are checked against the config's bones and chains, including mesh and `auto` bone/region references; an unresolved entry is never written. Each skipped part gets a note naming its attachment or the unresolved reference and why. An accepted split part from `full:drape-<s>` / `full:hand-<s>` also gains its missing `assemble.plan` row (drape before the full run's `handwear-<s>` row, hand after it); added row by row and entry by entry, every existing byte as read |
|
|
2892
3037
|
| `propose --cloth <input.json>` | new file | the recipe's edits spliced into the cloth config; §3, *The config written*, gives entry ownership, hand-edit conflicts and `--from <previous.json>` |
|
|
2893
3038
|
|
|
2894
3039
|
For the first three modes (not `--only-missing`), each selected field replaces its whole value; other
|
|
@@ -2907,8 +3052,8 @@ and refuses this flag; `--from` belongs to the cloth mode only.
|
|
|
2907
3052
|
`--only-missing` (issue #671) is the upgrade path for a config proposed before a stage
|
|
2908
3053
|
made a part it never named — the 1.37.0 arm split's `drape_<s>` and `hand_<s>`
|
|
2909
3054
|
([MIGRATION](MIGRATION.md#after-1370-merged-arm-layers-are-split-issue-490)): the same
|
|
2910
|
-
loader validates the candidate
|
|
2911
|
-
|
|
3055
|
+
loader validates the candidate after unresolved entries have been skipped with a note
|
|
3056
|
+
naming the part, reference and reason; a skipped entry gets no plan row, and a part of any
|
|
2912
3057
|
other origin gets no plan row; nothing missing keeps the bytes and mtime; stderr names each added row and entry. It is a usage error with `--head-box`, `--cloth`
|
|
2913
3058
|
or `--from-config`, or without `--parts` or `--write-config`.
|
|
2914
3059
|
All four modes use one file-writing adapter. Fresh cloth output keeps its
|
|
@@ -2935,7 +3080,7 @@ existing hardlinks are refused before artifact output; the ordinary mode names
|
|
|
2935
3080
|
| `propose` | `note:` lines, `LINT` lines, the `coverage` lines, `landmarks.png`, `basis.json` | no LINT line: every chain link lies on its mesh's art, and the hip is below the chest and the figure's top quarter; the `coverage:` summary says how many bones that verdict covers — a `not checked` bone was read by no check (its line says why), and a `ratio` or `fallback` bone in `basis.json` is a guess | a link off the art (a bone on the background) — move it onto the layer; `LINT <link> at … runs to … N degrees off the head's down axis …` — a fringe link that does not lean with the head (§3, the fringe in the head's frame): move it along the lock it drives; `LINT <bone> under <parent>: amplitude <a> below the link above's <b> in the keyed chain …` — under `--cloth`, a keyed sibling the recipe left the only keyed child of its parent, which `CHAIN_LAG` would refuse (issue #572, §3 *A keyed sibling left behind*): raise the field it names to `<b>` or more in size; `LINT hairback_… on mesh '<part>' (side <r\|l>): <N> tree(s) for <M> visible hair mass(es) (mass 0 columns x=<minX>..<maxX>, y=<minY>..<maxY>; …)` — back-hair cloth trees whose count does not match the side's visible hair masses (`max(1, floor(w / (4 * grid)) + 1)` per mass) or whose link or tip leaves its mass's column range (issues #445, #461): omit `chains` on `cloth."back hair"` or draft trees per visible hair mass inside its columns; `LINT <a_limb> and <b_limb> on <part> (<from>) cross at [x, y] with no per-limb split: …` — two limbs sharing one layer cross in an X without a per-limb split (issue #446): declare `config.limbs.<covering>.split` (`{ "line": [[x, y], …] }` or `{ "edge": "painting" }`, §3 *Which limb*); `LINT foot_<s> at [x, y], the <s>_ankle joint and leg_<s>1's tip, lies on none of leg_<s>'s art within 1 px along its joint line (the nearest of it on that line is the pixel [x, y], D px from the joint): …` — an ankle keypoint off its leg's art on the line `assemble` sizes the ankle's cap by (issue #517): `propose` drafts every leg without its ankle cut, the shoe layer stays one part, and nothing is moved onto the art; move that ankle keypoint onto the leg's or the shoe's art and re-run `propose` (`(the line crosses none of it)` when no art lies on that line at all); `LINT stop on <chain> (<firstLink> at [x0, y0]) against <against> (at [ax, ay]) places <chain>_touch at [tx, ty], above <firstLink>'s root (rest R deg, \|rest\| + outward B deg): …` — a stop's contact point `<chain>_touch` lies above `links[0]`'s root in rig px or pushes `\|rest\| + outward` past `180°` (issue #447, §2 `stops`): stop against the descending limb bone below `firstLink`, set `links` to start at a link below `<chain>_touch`, or omit the stop on a rising limb; `LINT hip at [x, y] is not below chest at [x, y]: …` or `LINT hip at [x, y] is above 0.25 of the figure height (figure y T..B, so hip y must be at least L): a hip at the shoulders` — move `hip` down to the waist (and `chest` between it and the neck); a `hanging strand … -- no chain proposed` note — that strand hangs stiff until you add a chain down the x and rows it names (§3); a `no blink: …` or `blink without brows: …` note — the idle will not blink (or its brows will not drop), because no part came from an `eyewhite` (or `eyebrow`) layer; the note names the tags looked for; a `no eyewhite part for eye_<s> …` note — the iris and lash parts it names ride `head` and do not blink, because no `eyewhite-<s>` part made that side's eye bone: take the eyewhite from the other run, or keep them on `head`; a `no face part: face box derived from …` note (always the first) — `head`, `neck` and every face-height scale come from a box guessed off the hair and neck (§3): check `head` and `neck` on `landmarks_head.png` and move them; when it adds `the blink shuts the eyes over no face part`, read `BLINK_NO_HOLE` after `check` — an eye with no face under it can open a hole (the `reference-sample` with only its face removed: 587 px). Under `--keypoints`: the `lint rule set:` line first (joints, or screen and why), then the joint notes — `missing: the rule "…" placed bone X instead` is a bone still guessed; `not used — …` names why an arm's joints did not place its sleeve (for a wrist on no part, the nearest part and the `--wrist-snap` that would bind it); a `wrist snap: …` note is a wrist bound past 15 px by the flag — check that chain's tip on `landmarks.png`; a `one handwear part holds both wrists` note is two chains on one mesh — cut the part with `assemble.cuts` to separate them; `LINT chest at … is not between the neck joint …`, `LINT hip at … is not past chest …`, `LINT hip at … is nearer the neck joint …` and `LINT <chain><i> at … does not advance from <s>_shoulder toward <s>_wrist` are the joint-frame lines: move that bone between, past or along the joints they name |
|
|
2936
3081
|
| `compare` | one line per pair (origin, parent, tip, length, direction — or SKIP and why), then the per-row summary, the unmapped bones of each side, `required:`, each side's roles and the `controls:` line | proposal against the config you corrected: the rows you changed and no others. Config against the `rig.json` `build` writes for it: measured on both examples, every origin within 6.19e-7 px (the rig's offsets are written to 6 places) and every chain link's tip and length within 4.99e-4 px (`length` is written to 3), printed to three places as `0.000` (a signed figure as `+0.000` or `-0.000`); `parent … is the right's ancestor at depth 2, <bone>_ctl between` for every keyed mesh bone, no `DIFFERENT` and no `NOT MAPPED` | `parent DIFFERENT: left a, right b` — a bone hangs from another parent than the other side's; `frames not related` — a rig with no stage (`skeleton.width`/`height`), two configs at different `rig_scale`: the distance rows SKIP, so declare the frame in a `--map` file if the author knows it; `FAIL STRUCTURE_REQUIRED_PRESENT` — a bone the map requires is missing through its pairs |
|
|
2937
3082
|
| `rig` (inside `build`) | one line per mesh: vertices, triangles, bones, influences, `cover`; the `bones` line; the `idle keys` line; then rigc's gate lines (with A15's declared SKIP under `--idle-keys direct`); in `rig.json`, each chain link's (or its `_ctl`'s) `length` and `rotation` | `cover 1.00000` on every mesh, both gate summaries `0 failed` (the compile and the packed pages); every link's `length` the distance to the next link and `rotation` its direction (Spine degrees, counter-clockwise, y up, local to the parent), every offset under it — a child bone's `x, y`, a weight's bind `x, y`, a region's `x, y` — in that turned frame, and a region on a link carrying `rotation` that turns it back upright. Nothing moved: `flattenRig` (`src/rig.ts`) turns every offset back and gives the unturned numbers | `RIG_LATTICE_ONE_LOOP`: change that mesh's `grid` |
|
|
2938
|
-
| `check` (inside `build`) | the gate lines verbatim, the pack line, `loop:` (and `loop physics:` when the rig declares a physics constraint, §7), `seam:`, the six judgement lines, then — when `motion.json` holds an animation, the idle included — `ANIMATIONS_DO_NOT_FOLD` and one `folds` line per folding mesh, rigc's own (issues #320, #333), then — where a `footwear` part rides a bone that hangs from another — `FEET_STAY_LEVEL` and one `foot` line per such part (issue #348), then — when `parts.json` names a `handwear` part and there is an idle — `STRESS_OFF_CHAIN` (issue #347), then — where `parts.json` holds a limb segment's part — `LIMB_ONE_BONE` and one `limb` line per such part (issue #349), then — where a limb record carries a `range` — `SEAM_OVER_RANGE` and one `joint` line per joint and angle (issue #360), then `SEAM_OVER_MOTION` — a SKIP naming why on a rig that declares no neighbour pair, else the pairs read in every animation and
|
|
3083
|
+
| `check` (inside `build`) | the gate lines verbatim, the pack line, `loop:` (and `loop physics:` when the rig declares a physics constraint, §7), `seam:`, the six judgement lines, then — when `motion.json` holds an animation, the idle included — `ANIMATIONS_DO_NOT_FOLD` and one `folds` line per folding mesh, rigc's own (issues #320, #333), then — where a `footwear` part rides a bone that hangs from another — `FEET_STAY_LEVEL` and one `foot` line per such part (issue #348), then — when `parts.json` names a `handwear` part and there is an idle — `STRESS_OFF_CHAIN` (issue #347), then — where `parts.json` holds a limb segment's part — `LIMB_ONE_BONE` and one `limb` line per such part (issue #349), then — where a limb record carries a `range` — `SEAM_OVER_RANGE` and one `joint` line per joint and angle (issue #360), then `SEAM_OVER_MOTION` — a SKIP naming why on a rig that declares no neighbour pair, else the pairs read in every animation; existing internal-joint and explicit-seam pairs retain their `WARN seam` policy (issue #493), while proven body-root tears print `FAIL seam` and fail a counted bar (issue #686), then `CLOTH_SETTLES` — a SKIP naming why on a rig with no physics constraint, else the chains read and one `WARN chain` line per chain whose tip comes to rest before the idle's loop length (issue #501, a warning and never a bar), `RECOMPOSITE_HOLES` and, under `--source`, `SETUP_POSE_VS_SOURCE` (§7), `check.json`; the last line says how many of the bars measured — nine, ten with the fold bar, one more each with the feet-level bar, the stress bar, the limb bar, the range bar and, where proven body-root pairs exist, the body-root seam bar — and names the ones that said SKIP, then — where `SEAM_OVER_MOTION` read a pair — how many warnings it printed, `; N warning(s) (SEAM_OVER_MOTION, not a bar)` — with `CLOTH_SETTLES` named beside it, and N their sum, where the rig declares a physics constraint — which no bar counts | `check: PASS; 11 of 11 bar(s) measured, 0 skipped` on `demo` and `scarf`, whose sleeves each ride one chain; `check: PASS; 10 of 11 bar(s) measured, 1 skipped (STRESS_OFF_CHAIN)` on `reference-demo` and `reference-sample`, whose one `sleeves` mesh rides both sleeve chains (issue #347) — no example writes `FEET_STAY_LEVEL`, every shoe riding `root`; a judgement line SKIP only where the character lacks what it reads; on a rig spec with no `parts.json` or no `idle` (a merged rig, §7 *Measuring a rig rig-parts did not assemble*), PASS with the skipped bars named | `CHECK_SEAM_WITHIN_BAR` or `CHECK_LOOP_CLOSES` (§6); `CHECK_ANIMATIONS_DO_NOT_FOLD` — a clip turns a mesh over (§6); `CHECK_STRESS_OFF_CHAIN` — a sleeve weighted off its chain (§6); `CHECK_LIMB_ONE_BONE` — a limb part on a second bone (§6); `CHECK_SEAM_OVER_RANGE` — a joint that opens when bent (§6); `CHECK_SEAM_OVER_MOTION` — a proven body-root seam opens over the existing floor (§6) |
|
|
2939
3084
|
| `check --requirements` (and `build --requirements`) | after the lines above, one line per declared requirement, `NAME: PASS`, `FAIL` or `NOT MEASURABLE — …` with its figures, the bar as declared and the worst frame; then `requirements: N declared — M measured (P PASS, F FAIL), K NOT MEASURABLE; not declared: <kinds>`; `check.json`'s `requirements` block, first its `file` record (issue #556); the renders under `requirements/` (§7, *Declared requirements*) — `build` reads `config.requirements` in place of the flag when it is not given | every line PASS and `0 NOT MEASURABLE`; a follow's `released_copy` says whether rigc's consumer-driven door was taken on the throwaway copy; a `stretch` line's `held_by` (issue #321), right after `worst`, names the bones the worst edge's two vertices hang on and their idle chains, in `CHECK_TEXTURE_STRETCH`'s words (§6) and by the same function, on a PASS as on a FAIL | `CHECK_REQUIREMENT_MET` (a figure past its bar; the line names the frame) or `CHECK_REQUIREMENT_MEASURABLE` (the quantity is undefined in the frames: a tip or an axis on a bone of length 0, an aim with no line, a follow no frame of which reaches its least drive); the last line then reads `check: FAIL — B bar(s) not met, R declared requirement(s) not PASS` |
|
|
2940
3085
|
| `compose` | the `[compose]` lines: one per character (its offset, its scale, its placed bounds, the shift and how many first-level bones, regions on `root` and weights bound to `root` it moved, its bone, slot, track and constraint counts, its `rig_scale` and idle), the declared order and the slot count it expands to, rigc's gate lines; then the `[check]` lines as for `check`, and `scene.json` | both gate summaries `0 failed`, `check: PASS` with the bars that measured and the ones that said SKIP named — on a composed rig `4 of 9`: the gate, the loop, `CHAIN_LAG` and `TEXTURE_STRETCH` (there is no `parts.json`; each character's own `build` measured all nine). `scene.json`'s `order.slots` is the order the compiled skeleton draws | a `SCENE_*` refusal (§6, *compose*) — the scene file, a build, or the order; `COMPOSE_RIGC_GREEN` — rigc's own line, quoted |
|
|
2941
3086
|
| `loop` (inside `build --loop`, or `loop --frames … --out …`) | the dropped-duplicate line, or, when the end frame is not frame 0, the jump line: its max \|d\| and px over 40, then why — under `build`, `the rig holds N physics constraint(s), and rigc's render starts every one at rest at frame 0` with the remedy `build --loop --lead-in <n>`, or `the rig holds no physics constraint, so the idle itself does not close` (`CHECK_LOOP_CLOSES`); under `loop --frames`, which reads frames alone, both causes (issue #325); under `build --lead-in`, the lead-in line in its place (the frames kept and the jump at the wrap); each file's line, then `loop: idle.png N B (lossless); idle-indexed.png N B (max …, mean …); idle.gif N B (max …, mean …)` | `f0048.png equals f0000.png byte for byte, so it is dropped` | `LOOP_ENCODE` (§6) |
|
|
@@ -3243,7 +3388,9 @@ note says how to take the head run's too); `assemble` records it as
|
|
|
3243
3388
|
(<run>:author:<label>) — …` line after the part lines; and `propose` gives it no role
|
|
3244
3389
|
— no rule reads it, it rides the nearest trunk bone as a region, and the note says the
|
|
3245
3390
|
bone is `regions.<part>`'s to name (or give it a mesh in `meshes`). Its draw position is
|
|
3246
|
-
its place in `assemble.plan`, like any part's.
|
|
3391
|
+
its place in `assemble.plan`, like any part's. A gesture set can select this layer
|
|
3392
|
+
for its covered parts with `assemble.alternates[i].layers`, without changing that
|
|
3393
|
+
base plan or overwriting a See-through tag (issue #666).
|
|
3247
3394
|
|
|
3248
3395
|
Do not borrow an unused See-through tag for it instead (`tail`, `wings`): `layers`
|
|
3249
3396
|
prints it as a body layer, `parts.json` records it as See-through's `tail`, and
|
|
@@ -3439,6 +3586,7 @@ See-through with another seed.
|
|
|
3439
3586
|
| <a id="CONFIG_ANIMATION_NAME_FREE"></a>`CONFIG_ANIMATION_NAME_FREE` | the `motion.animations_from` file holds an animation named `idle`, the animation `config.motion` writes | rename that animation |
|
|
3440
3587
|
| <a id="CONFIG_HEAD_BOX_SQUARE"></a>`CONFIG_HEAD_BOX_SQUARE` | `seethrough.head_box` is not a non-empty square | `head_box` — take `propose --head-box`'s |
|
|
3441
3588
|
| <a id="CONFIG_TAG_KNOWN"></a><a id="CONFIG_PART_NAME"></a><a id="CONFIG_PART_UNIQUE"></a>`CONFIG_TAG_KNOWN`, `CONFIG_PART_NAME`, `CONFIG_PART_UNIQUE` | a plan or extend entry names neither a v3 tag nor `author:<label>` (an `author:` tag with a malformed label says what the label must be), a part name that is not a file name, or a part or layer twice — a patch named like a plan part or another patch, and a cut's `into` named like a plan part, a patch or another cut's, included | `assemble.plan`, `assemble.patches`, `assemble.cuts` |
|
|
3589
|
+
| <a id="CONFIG_SET_LAYERS"></a>`CONFIG_SET_LAYERS` | `assemble.alternates[i].layers` names an unknown, uncovered or hidden part, or a painting patch with no run-layer source | name a covered layer-backed output part (a limb segment name, not its consumed source); use `author:<label>` for author art |
|
|
3442
3590
|
| <a id="CONFIG_NAME_RESOLVES"></a>`CONFIG_NAME_RESOLVES` | a parent, segment, region, track, blink member, blink still part or bone, extend part, patch or cut `draw.before`, or cut `from` names nothing declared above it (a cut's `from` must be a plan part); or a constraint's `bones`, `target`, `source` or `bone` names a bone `bones` does not declare (the detail names the constraint and lists the bones that exist); in `meshes.<part>.auto`, a bone or region name nothing declares; or `bones[i].link_inherit` names a link outside its own chain (the detail lists that chain's expanded links) | the named reference, or the declaration it needs |
|
|
3443
3591
|
| <a id="CONFIG_BONE_UNIQUE"></a>`CONFIG_BONE_UNIQUE` | a bone or chain declared twice, or `root` declared | `bones` |
|
|
3444
3592
|
| <a id="CONFIG_BONE_INHERIT"></a>`CONFIG_BONE_INHERIT` | a single bone's `inherit`, or a chain's `link_inherit.<link>`, is a string that is not one of rig-c's five mode names as its table spells them (issue #348); the line lists all five. `"NoScale"` is refused too: the runtime would fold the first letter, and this loader folds and maps nothing | `bones[i].inherit` or `bones[i].link_inherit.<link>` — `normal`, `onlyTranslation`, `noRotationOrReflection`, `noScale` or `noScaleOrReflection` (§3, `bones`) |
|
|
@@ -3474,7 +3622,7 @@ See-through with another seed.
|
|
|
3474
3622
|
| <a id="CONFIG_TURN_REQUIRED"></a>`CONFIG_TURN_REQUIRED` | `motion.animations_from` carries `turn` or `tilt` `derive` keys while `config.turn` is absent, or an attached head part (`face`, `hair_front`, `hair_back`) is missing from `config.turn.depths` (issue #478): without `turn.depths` the head pivot and back-of-head counter-parallax cannot be derived | run `propose --full` (or `--head`) to draft `config.turn`, or declare `config.turn` with `pivot` and `depths` covering `face`, `hair_front` and `hair_back` |
|
|
3475
3623
|
| <a id="CONFIG_FACE_BAND_EXCEEDED"></a>`CONFIG_FACE_BAND_EXCEEDED` | `turn.band` or a `motion.animations_from` `turn`/`tilt` `derive.degrees` exceeds the single-plate rated band (`FACE_RATED_BAND`: `yaw <= 15°`, `pitch <= 12°`, issue #472) while no `assemble.alternates` entry replaces `face`; the detail gives the requested angle, the rated limit and both remedies | clamp the angle to `±15°` yaw / `±12°` pitch, or declare an `assemble.alternates` entry covering `face` for the 3/4 or profile plate |
|
|
3476
3624
|
| <a id="CONFIG_PROPOSED_RIG_SCALE"></a>`CONFIG_PROPOSED_RIG_SCALE` | `proposed_rig_scale` (the `scale_rig_per_source` `propose` drafted the rig sections at, issue #354) differs from `assemble.rig_scale`: the coordinates in `bones`, `meshes`, `limbs` and `motion` are in that rig canvas's pixels and do not scale when `assemble.rig_scale` changes | re-run `assemble` and `propose` at the new `assemble.rig_scale`, or restore `assemble.rig_scale` to `proposed_rig_scale` |
|
|
3477
|
-
| <a id="CONFIG_BUST_CLEARANCE"></a>`CONFIG_BUST_CLEARANCE` | `meshes.<part>.contour.bust
|
|
3625
|
+
| <a id="CONFIG_BUST_CLEARANCE"></a>`CONFIG_BUST_CLEARANCE` | `meshes.<part>.contour.bust`: `clearance <= 0`, `R_r + R_l >= D` where `R_s = round(d_s - clearance)` and `D = \|apex_r − apex_l\|`, a non-positive core `r_s = round(alpha × R_s)`, or a negative band `R_s − r_s`; the detail names the rounded values found | use the detail's first passing clearance on 0.01 px steps, checked against the same rounded rules (not the unrounded distance bound); if no such value exists, move `cleavage` or the apices, or change `alpha`, then retry. A larger clearance can also erase a core, so do not keep increasing it blindly |
|
|
3478
3626
|
| <a id="CONFIG_SET_COVERS_SLOT"></a>`CONFIG_SET_COVERS_SLOT` | `motion.animations_from` (issue #473): a track key carries `"set": "<name>" \| null` on a track other than `property: "attachment"`, names an alternate set not declared in `assemble.alternates`, or names an alternate set that does not cover the track's `slot` (neither in `slots` nor in `hides`); the detail names the set, the slot and the slots that set covers | declare the set in `assemble.alternates`, add the slot to that set's `parts` (or `hides`), or key `"set"` on a slot the set covers |
|
|
3479
3627
|
| <a id="CONFIG_SET_COVERS_BONE"></a>`CONFIG_SET_COVERS_BONE` | `assemble.alternates[i].drawn.<bone>` (issue #476): a subset set (`parts` present) states a `drawn` world angle for a bone none of its covered parts ride; the detail names the bone, the set, and the bones its covered parts ride | remove the uncovered bone from that set's `drawn`, or add the part that rides it to `parts` |
|
|
3480
3628
|
| <a id="CONFIG_LIMB_SET_JOINTS"></a>`CONFIG_LIMB_SET_JOINTS` | `assemble.alternates[i]` (issue #476): a gesture set over a limb chain declared in `config.limbs.<limb>` names the unsplit `from` layer instead of the limb's segment `part`s, covers (or hides) only a subset of the limb chain's segments, or declares custom polygon `cuts` on the limb; the detail names the limb and its segment parts | cover all segment `part`s of `config.limbs.<limb>` in `parts` with no custom `cuts`, so `assemble` cuts the set at the base's joints |
|
|
@@ -3550,6 +3698,7 @@ says why each requirement exists and what breaks without it.
|
|
|
3550
3698
|
| <a id="ASSEMBLE_LIMB_CUT_BAND"></a>`ASSEMBLE_LIMB_CUT_BAND` | a segment's `cut_band` reaches past the limb: a line of its band, the detail names the one nearest the joint and a point it passes through, crosses none of the limb's art within 1 px of that point, so a cut placed there would cut nothing (issue #360) | `cut_band`: the widest band whose every line crosses the limb, which the detail gives |
|
|
3551
3699
|
| <a id="ASSEMBLE_LIMB_CAP_PRESENT"></a><a id="ASSEMBLE_LIMB_CAP_DECODES"></a><a id="ASSEMBLE_LIMB_CAP_SIZE"></a><a id="ASSEMBLE_LIMB_CAP_EMPTY"></a>`ASSEMBLE_LIMB_CAP_PRESENT`, `ASSEMBLE_LIMB_CAP_DECODES`, `ASSEMBLE_LIMB_CAP_SIZE`, `ASSEMBLE_LIMB_CAP_EMPTY` | a segment's `cap` names no file (relative to the config's directory) or one that is not a PNG; an image not the size of the cap's box (the detail gives both, and the box's corner); or one transparent over every cap pixel (issue #349) — under `cap_shape: "ball"`, over the upper half and over every lower-half pixel where the lower piece is transparent (issue #579) | the image: the box the `limb cap:` line prints, `w`x`h`, its pixel `(i, j)` rig pixel `(x + i, y + j)`; to keep the layer's cap, drop `cap` |
|
|
3552
3700
|
| <a id="ASSEMBLE_HIDDEN_ONE_SOURCE"></a>`ASSEMBLE_HIDDEN_ONE_SOURCE` | a cut's `under`, or a limb segment's `cap`, names a file, and the part it reads also has a hidden-art layer (`<layer>:hidden`, issue #359): reading either would be a guess | remove the file from the config, or the hidden-art layer from the input |
|
|
3701
|
+
| <a id="ASSEMBLE_ALT_LAYER_SOURCE"></a>`ASSEMBLE_ALT_LAYER_SOURCE` | a direct alternate-layer selection has no planned source (for example a painting patch) | use a layer-backed covered plan part; a painting patch reads the painting, not a run layer |
|
|
3553
3702
|
| <a id="ASSEMBLE_ALT_INPUT_PRESENT"></a>`ASSEMBLE_ALT_INPUT_PRESENT` | an alternate painting set (`assemble.alternates` or `--alt`, issue #454) is missing `source` or `full`, names a file or directory that is not on disk, or lacks a covered part's layer in its runs | give `source` and `full` on the alternate set, or list an occluded part in `hides` |
|
|
3554
3703
|
| <a id="ASSEMBLE_ALT_CANVAS_SIZE"></a>`ASSEMBLE_ALT_CANVAS_SIZE` | an alternate painting's canvas size differs from the primary painting's (issue #454; the detail gives both sizes) | the alternate painting: the primary painting's canvas size, so its parts land in the same rig frame |
|
|
3555
3704
|
| <a id="ASSEMBLE_ALT_SKELETON"></a>`ASSEMBLE_ALT_SKELETON` | an alternate set's `skeleton` file (`assemble.alternates[i].skeleton`, issue #465) is not JSON or does not hold `{"width": W, "height": H, "points": {…the 18 body-18 keypoints}}` | that set's `skeleton` file |
|
|
@@ -3674,6 +3823,17 @@ exits 0, and `mesh_draft.json` and the console name the reading and the amount.
|
|
|
3674
3823
|
| <a id="REMESH_INPUT_CHECK_MOVED"></a>`REMESH_INPUT_CHECK_MOVED` | under `--record-input-check`, a file under `--rig` or `--parts` (or the requirements file) is not the same bytes after check-input read it as when the input was first hashed; the file and both digests are named. The check may have measured bytes the record's rows do not name, so neither the record nor the revision is written | leave the input alone while the run measures it, and run again |
|
|
3675
3824
|
| <a id="REMESH_BONES_POSED"></a>`REMESH_BONES_POSED` | rig-c cannot pose the input's bones at the setup pose — its expansion of the rig's `stops`, or its evaluation of the bones (a bone `inherit` the runtime resolves to no mode), refuses with the sentence quoted; nothing was written | read rig-c's sentence; rigc's gate over the input passed, so report it with the line |
|
|
3676
3825
|
|
|
3826
|
+
**Revision ancestry (issue #531).** Both `remesh` and `retune` keep every prior
|
|
3827
|
+
root `remesh.json` / `retune.json` byte for byte at
|
|
3828
|
+
`provenance/<command>-<sha256>.json`. The new record's optional `input.provenance`
|
|
3829
|
+
rows name each parent (`source`, `path`, `bytes`, `sha256`), so a revision of a
|
|
3830
|
+
revision keeps its earlier records recoverable, including mixed commands. Existing
|
|
3831
|
+
history is carried forward unchanged. A conflicting history path is refused by
|
|
3832
|
+
`REMESH_PRESERVED` / `RETUNE_PRESERVED`. `revision` hashes the files actually
|
|
3833
|
+
written, excluding only the new root provenance itself (a file cannot hash itself);
|
|
3834
|
+
a newly recorded `input-check.json` is hashed with its new bytes. The rig splice
|
|
3835
|
+
and hold rules are unchanged; a first revision has no parent rows.
|
|
3836
|
+
|
|
3677
3837
|
A remesh changes one part's mesh and nothing else: every file of the input but
|
|
3678
3838
|
`rig.json` and `mesh_report.json` is copied as bytes, `rig.json` keeps every byte
|
|
3679
3839
|
outside the part's attachment, and the parts the config does not reproduce — repairs
|
|
@@ -3849,10 +4009,25 @@ documents do not ship). Each is an input this package built; none is an author's
|
|
|
3849
4009
|
| <a id="CHECK_STRESS_OFF_CHAIN"></a>`CHECK_STRESS_OFF_CHAIN` | a mesh from a See-through `handwear` layer that rides one chain of the idle does not turn rigidly with it: with the chain's first link turned 90°, −90° or 180° on a throwaway copy (physics left out, posed by rigc, issue #347), its worst edge reads above 1.0000 as max(ratio, 1/ratio) against the setup pose. The object names the mesh, the link and the turn; the detail quotes the edge and names each bone the mesh is weighted to off the chain, with how many vertices carry it and the largest weight. Or the turned render shows no mesh on the slot: not read is not a pass | the mesh's `segments`: drop the segment on the bone the line names (a 16 px `chest` stub at the shoulder, as `propose` drafted until issue #347), so the sleeve rides its chain alone. Measured (rigc 2.47.1): `demo`'s sleeves read 2.46 to 254.7 with the stub and 1.0000 without it, and the setup-pose seam does not move (mean 0.147, 0 px over 40, both ways) |
|
|
3850
4010
|
| <a id="CHECK_LIMB_ONE_BONE"></a>`CHECK_LIMB_ONE_BONE` | a part a `config.limbs` segment made is bound in `rig.json` to a bone besides its segment's — a mesh weighted to a second bone, or a slot on another bone — or to none (issue #349); the object names the part, its limb and its bone, the detail every other bone | `regions.<part>` the segment's bone, or a mesh whose `segments` name that bone alone: a bend is a rotation at the joint |
|
|
3851
4011
|
| <a id="CHECK_SEAM_OVER_RANGE"></a>`CHECK_SEAM_OVER_RANGE` | a limb joint with a declared `range` (issue #360), bent to one of its range's ends or its middle, fails the rest-pose seam's bar against the same pose with the joint's own art drawn under the limb — the bend uncovers the joint; the object names the joint, its limb and segment, the part, the bone and the angle. Under `cap_shape: "disc"` (issue #360, unit B) or `"ball"` (issue #598), also any pixel of the disc over 40 at a pose, under the seam's bar or not. Also a joint the line cannot read (its bone has no parent in `rig.json`, no slot shows its limb, or its cap's disc holds no opaque art), and, refused, two renders of the bent copy that rigc did not put on one grid | a cap that covers the turn: the layer's art within the cap's radius on the upper side of the joint line, or a `cap` image painting what the layer lacks (`limb cap:` names the missing pixels); or a narrower `range` |
|
|
3852
|
-
| <a id="SEAM_OVER_MOTION"></a>`SEAM_OVER_MOTION` | **
|
|
4012
|
+
| <a id="SEAM_OVER_MOTION"></a>`SEAM_OVER_MOTION` | **Existing internal-joint and explicit-seam pairs remain warnings** (issue #493; a seam that opens in motion may be intended). **Proven body-root pairs are a bar** (issue #686): an above-floor opening adds `CHECK_SEAM_OVER_MOTION`, sets `PASS` false and exits 1. Every declared neighbour pair — each limb's two segments at a joint, the upper and the one below (`parts.json`'s limb records, `config.limbs`), and under `--requirements` each `seam`'s `part` and `neighbour`, one pair however many declare it — read in every animation `motion.json` holds, the idle included, by rig-c's seam reading: one `rigc render --seam <a>:<b>,… --fps 12` over the packed build as played (physics on), whose `seam.json` (`rigc-seam/1`, rig-c's AUTHORING §8.8) names per pair and frame a **gap** (background inside the joint) or a **ghost** (one piece's overlap band swung clear of its partner), each frame's cells (`px`, one texel of the coarser drawing — a rig px on a build at scale 1), its cell size and its world box. Printed for existing warning pairs and animations with a frame over the floor: `WARN seam "<a>\|<b>" opens on N frame(s) [<frames>] max <px> px in "<animation>" — over the one-cell floor`, then how many more frames rigc named that were under it. **The floor**: a frame's gap or ghost is reported when it holds more cells than its box is long (its longer side, in cells) — thicker than one cell. A cell is drawn when the renderer paints its centre at half opacity, so an outline that moves by less than a cell flips the cells along it: a line one cell deep, joined or scattered, holds at most as many cells as its box is long, and a hole of any area more. The rule types no number; measured on `examples/wind`'s idle, rigc names 43 openings over its six limb pairs (the two elbows, 1 to 5 cells, boxes up to 17 cells long), every one one cell thick, and on rig-c's `gallery/walk` 13 joint cracks of 1 to 3 cells, all one cell thick. `check.json`'s `SEAM_OVER_MOTION` holds `status` (`WARN`, `CLEAR`, `SKIP`, or `FAIL` for a new root tear), `fps`, `floor`, `pairs`, `animations`, `warnings` and one row per pair and animation (`opens` and `px` over the floor, `max_px`, `under_floor`, rigc's `status`, `drawn` and `banded`); for existing warning pairs it moves no exit status, no `check: PASS` and no bar count — the summary ends `; N warning(s) (SEAM_OVER_MOTION, not a bar)`. **SKIP**, named: no pair declared (no limb segment, no `seam`; then `check.json` has no key), no `parts.json`, no animation, every pair naming a slot `rig.json` lacks (each printed `not read`), or rigc reading no band on any frame of any pair (rigc's own `skip`: the two drawings share no cell at rest) — nothing measured, never a pass | if the opening is not intended: a cap that covers the turn (`config.limbs`, *Limbs: cut at their joints*; `limb cap:` names the pixels the layer lacks), or a motion that bends that joint less; if it is intended, nothing |
|
|
4013
|
+
| <a id="CHECK_MOTION_SEAM_ROOT"></a>`CHECK_MOTION_SEAM_ROOT` | a body-root declaration has missing or ambiguous segment0, bone, parent, slot or default-skin attachment; the refusal names the part and candidates | supply the declared one-to-one hierarchy/slot/provenance binding; no nearest or mesh-influence fallback |
|
|
4014
|
+
| <a id="CHECK_SEAM_OVER_MOTION"></a>`CHECK_SEAM_OVER_MOTION` | a proven body-root pair has an active animation GAP above the unchanged one-cell floor (gap-only); mixed ghost remains INFO with unavailable ownership; the refusal names pair, animation, frame, cells, cell size and world box | repair the declared rest overlap or authored motion; the existing internal-joint warning policy and physics reference worlds are unchanged |
|
|
3853
4015
|
| <a id="CLOTH_SETTLES"></a>`CLOTH_SETTLES` | **a warning, never a refusal** (issue #501; the owner's ruling: cloth at rest while the character stands may be intended). Every physics chain, read by its tip on the idle `check` renders — `rigc render --animation idle --fps 12 --geometry`, physics on, rigc's default environment. A chain is a **physics leaf** — a bone a physics constraint names (`rig.json`'s `constraints` or `motion.json`'s `physics`) with no such bone under it — and the run of physics bones above it; its tip is the leaf's end (origin plus `length` along its world x axis), or its origin when the leaf has no length; its speed between frames is the tip's distance over their time, from the idle's `geometry.json`. A chain **settles** at the first frame from which every speed to the idle's last frame is under the floor, and each one that does — before the loop's length is out — prints `WARN chain "<root>" .. "<tip>" (N physics link(s)) settles at <t> s of the <d> s idle — its tip's end under 0.01694 rig px/s from there to the last frame (fastest on the idle <v> rig px/s)`. **The floor**, 0.01694 rig px/s, is derived, not chosen: half the slowest tip an idle key drives on the public examples (the repository's floor rule, half the weaker figure) — measured with this port's build of each (rig-c 2.60.0), over the 31 chains a keyed bone at or above the leaf drives (`demo` 12, `reference-sample` 1, `scarf` 11, `wind` 7) the slowest frame-to-frame tip speed is `scarf`'s `skirt_l2`, 0.03388 rig px/s; the ten no key drives — `wind`'s skirt, eight trees and the swing, hung from a `hip` its idle never keys, and `reference-sample`'s `hip_jiggle` — fall under it from 1.5 to 2.75 s on a 3.333 s idle (`hip_jiggle` at 0 s: it never moves) and end at 0.0025 rig px/s or less. `check.json`'s `CLOTH_SETTLES` holds `status` (`WARN`, `CLEAR`), `fps`, `frames`, `duration`, `floor_rig_px_per_s`, `floor`, `levers`, `warnings` and one row per chain (`tip`, `root`, `links`, `point` — `end` or `origin` — `settles_at`, null when it does not, `max_rig_px_per_s`, `min_rig_px_per_s`); it moves no exit status, no `check: PASS` and no bar count — the summary's warning clause names it, `; N warning(s) (CLOTH_SETTLES, not a bar)` (with `SEAM_OVER_MOTION` before it, and N their sum, where that read a pair). It reads the idle alone, one loop from rigc's physics reset at frame 0: a chain that settles later than the idle is long is not seen. **SKIP**, named: no physics constraint (then `check.json` has no key), or no idle — nothing measured, never a pass | if the chain should move while the character stands, one of the consumer's two levers: an environment at render (`rigc render --environment`, wind and gravity in time — rig-c's AUTHORING §8.4), or a consumer's animation that moves the bone the chain hangs from. The drafted idle keys no hip, by measurement: a hip turn at the idle's period fails a bar on all five public examples (issue #502, §3 *What moves them*). A `cloth` recipe's skirt hangs from `hip`, which the drafted idle never keys (§3, *Recipe: cloth and hair that answer the world*, *What moves them*, which has a worked schedule for `wind`). If it is intended, nothing |
|
|
3854
4016
|
| <a id="CHECK_FOLDS_READ"></a>`CHECK_FOLDS_READ` | the fold render's `frames.json` names no set for an animation, a `folds.json` is missing, not `rigc-folds/1`, another animation's or another rate's, or a folding mesh has no line rigc printed for it | a rigc problem; report it, with `rigc --version` |
|
|
3855
4017
|
| <a id="CHECK_SEAM_FRAME_SIZE"></a><a id="FRAMES_SIDECAR"></a><a id="CHECK_GEOMETRY_FILE"></a>`CHECK_SEAM_FRAME_SIZE`, `FRAMES_SIDECAR`, `CHECK_GEOMETRY_FILE` | rigc's render is not what its `frames.json` says, or its `geometry.json` is not a whole `rigc-geometry/1` export of the frames beside it (a frame count, a mesh whose vertex count differs from its rest entry; for the face half, another viewport than `frames.json`'s, other frame indices, the head bone or a feature's bone missing from a frame, a non-finite transform or time) | a rigc problem; report it |
|
|
4018
|
+
| <a id="CHECK_SEAM_DOMAIN"></a>`CHECK_SEAM_DOMAIN` | the source-relative common union U cannot prove finite, bounded, exactly representable scale1 coverage of every actual drawn setup state, or official pinned.outside is not empty; U is the enlarged render and A remains the fixed authored denominator | retain the named evidence and report the unavailable or outside-art boundary; do not shrink art, pad the measured domain or infer transparency from geometry alone |
|
|
4019
|
+
| <a id="CHECK_SEAM_SUPPORT"></a>`CHECK_SEAM_SUPPORT` | the affected-set effect mask does not match the fixed source grid, or the declared source cells leave no mean denominator | report the named support mismatch; no alternate denominator or successful zero is substituted |
|
|
4020
|
+
| <a id="RENDERER_API_UNAVAILABLE"></a>`RENDERER_API_UNAVAILABLE` | the official renderer read API needed to identify a set's semantic support is unavailable | all cells remain conservatively affected; this is an informational capability reason, not an inherited-PASS proof |
|
|
4021
|
+
| <a id="SOURCE_RIG_UNREADABLE"></a>`SOURCE_RIG_UNREADABLE` | the original selected rig or its image-root declaration cannot be read for semantic support | retain the named unavailable reason; the set includes all cells conservatively |
|
|
4022
|
+
| <a id="SOURCE_SKIN_UNSUPPORTED"></a>`SOURCE_SKIN_UNSUPPORTED` | the source rig has no supported default-skin attachment mapping for the selected drawing | provide the exact supported mapping or report it; no skin or attachment is guessed, and all cells remain affected |
|
|
4023
|
+
| <a id="SOURCE_ATTACHMENT_MISSING"></a>`SOURCE_ATTACHMENT_MISSING` | no source attachment matches the actual selected slot and attachment identity | report those names; no suffix, nearest drawing or filename fallback is used, and all cells remain affected |
|
|
4024
|
+
| <a id="SOURCE_ATTACHMENT_AMBIGUOUS"></a>`SOURCE_ATTACHMENT_AMBIGUOUS` | more than one source attachment matches the actual selected slot and attachment identity | resolve the named source ambiguity; all cells remain conservatively affected meanwhile |
|
|
4025
|
+
| <a id="SOURCE_MAPPING_UNSUPPORTED"></a>`SOURCE_MAPPING_UNSUPPORTED` | the actual drawing mapping cannot be proven by this reader, including clipping or a sequence/non-image attachment | retain the named feature and include all cells conservatively; unsupported is not unchanged |
|
|
4026
|
+
| <a id="SOURCE_IMAGE_UNREADABLE"></a>`SOURCE_IMAGE_UNREADABLE` | the image resolved from the exact selected source attachment cannot be read | retain the named slot and attachment and report the missing image evidence; all cells remain affected |
|
|
4027
|
+
| <a id="POSE_EXPORT_UNREADABLE"></a>`POSE_EXPORT_UNREADABLE` | the setup geometry export needed to bind semantic support to the rendered pose cannot be read | retain the unavailable reason and all affected cells; no successful empty support is fabricated |
|
|
4028
|
+
| <a id="POSE_MISMATCH"></a>`POSE_MISMATCH` | the official sampled setup pose and captured geometry disagree in index, actual time or attachment roster | report the mismatch; the set includes all cells conservatively rather than inheriting an unproven drawing |
|
|
4029
|
+
| <a id="POSE_ATTACHMENT_MISSING"></a>`POSE_ATTACHMENT_MISSING` | a rendered piece does not resolve to exactly one attachment in the actual posed roster | report the named slot; no attachment identity is invented and all cells remain affected |
|
|
4030
|
+
| <a id="RASTER_READ_UNAVAILABLE"></a>`RASTER_READ_UNAVAILABLE` | the official posed-piece raster/page reading needed for semantic support is unavailable | retain the named capability reason; the set includes all cells conservatively, never an unmeasured inherited PASS |
|
|
3856
4031
|
| <a id="LOOP_ENCODE"></a>`LOOP_ENCODE` | the loop encoder refused a frame (translucent pixel in a GIF, a size change) | the frames; for a translucent frame write the lossless or the indexed APNG, which keep alpha |
|
|
3857
4032
|
| <a id="LOOP_LEAD_IN_IDLE"></a>`LOOP_LEAD_IN_IDLE` | `build --lead-in`: the idle cannot be repeated without inventing a value (a track not keyed from 0 to the duration, or ending where it does not start; a field besides `duration`, `loop`, `note`, `tracks`), the motion already has an `idle_lead_in`, or the render did not write whole periods | the refusal names the track or field; the demo's idle, as the rig stage writes it, repeats as written |
|
|
3858
4033
|
| <a id="CHECK_PACK_LINE_READS"></a>`CHECK_PACK_LINE_READS` | rigc printed a `pack:` line that is not `pack: <page> <W>x<H>, <N> region(s), <P>% covered, padding <D>`, then `, page edges free` or nothing, then `, shape rect`, `, shape polygon` or nothing (rig-c 2.1 prints the shape; 1.5–2.0 printed none, read as `rect`); an unknown shape is this refusal; the line is quoted | a rigc this package does not know the output of; report it, with `rigc --version` |
|
|
@@ -3860,6 +4035,7 @@ documents do not ship). Each is an input this package built; none is an author's
|
|
|
3860
4035
|
| <a id="CHECK_PACK_SHAPE"></a>`CHECK_PACK_SHAPE` | the pack line disagrees with the `--pack-shape` the build was run with — it ends `, shape rect` under `polygon` or `, shape polygon` under `rect`, or it has no shape clause (the 1.5–2.0 form, read as `rect`) under `polygon` | a rigc older than 2.1.0 on `PATH`: rigc 2.0.3 takes `--pack-shape` without a word, packs by rectangles and prints the form with no shape clause, so this refusal is what catches it — `bun install` (this package depends on rig-c ^2.20.4); otherwise a rigc problem, report it with `rigc --version` |
|
|
3861
4036
|
| <a id="BUILD_ARTIFACT_PRESENT"></a>`BUILD_ARTIFACT_PRESENT` | the packed build lacks its `.json`, `.atlas` or page | a rigc problem; report it |
|
|
3862
4037
|
| <a id="BUILD_REQUIREMENTS_CONFLICT"></a>`BUILD_REQUIREMENTS_CONFLICT` | `build --requirements <file>` names a file with other bytes than the one `config.requirements` declares (issue #556): the detail names both, each resolved (the flag against the working directory, the declaration against the config's) with its sha256 — or `no such file`. Refused before assemble writes anything. The same file by both, or a copy of its bytes, is not refused: the declaration is read and recorded | drop the flag to build from the config's file, or point `config.requirements` at the flag's |
|
|
4038
|
+
| <a id="BUILD_STAGE_REQUEST"></a>`BUILD_STAGE_REQUEST` | an internal build worker was given a missing or malformed request, an unknown stage, or incomplete runner, input, output or scratch paths; the worker refuses before running a stage. This is the internal process protocol, not a public command or option | invoke `rig-parts build` with its documented flags; if that command produces this refusal, report the named request defect rather than constructing or modifying a worker request |
|
|
3863
4039
|
| <a id="REQUIREMENTS_FILE"></a>`REQUIREMENTS_FILE` | `--requirements` names no file, or one that does not parse as a JSON object. Refused before anything is built (by `build`, before assemble) | the path of a `spine-parts-requirements/1` file |
|
|
3864
4040
|
| <a id="REQUIREMENTS_FIELD"></a>`REQUIREMENTS_FIELD` | a field of the file is missing, of the wrong type, or not one the format reads: `spec`, `fps` (no default), `requirements`, each requirement's `name` (letters, digits, underscores; once each), `kind`, `animation` and its kind's fields — every bar among them (`within_px`, `fraction`, `tolerance`, `least_drive` above 0, `within_degrees` from 0 to 180, `lo_degrees` ≤ `hi_degrees`, `within_ratio` ≥ 1) — and each target's `bone`, `animation` and exactly one of `at` and `keys` (times strictly increasing), and `not_planted`, `not_swinging`, `rises` and `rests` when given (each a non-empty list of part names, each once; no part both in `not_swinging` and in `rises` or `rests`), and `may_fold` when given (a non-empty list of `{ "slot", "animation", "why" }`, every one a non-blank string, each pair once; issue #320). `note`, `*_note` (strings) and `x-…` (any value) are read by nothing, as in the config | write the field; the bar is yours |
|
|
3865
4041
|
| <a id="REQUIREMENTS_RESOLVES"></a>`REQUIREMENTS_RESOLVES` | a bone, an `ik` or `transform` constraint (by name and `constraint_type`, as rig-c resolves it), a slot, a mesh attachment or an animation the file names is not in `rig.json` or `motion.json`, or a seam's part or a `not_planted`, `not_swinging`, `rises` or `rests` name is not in `parts.json` — the detail lists the ones that are; or an animation whose name cannot be a directory. Refused before anything is built | the name as the rig spells it |
|
|
@@ -3908,7 +4084,14 @@ wind (1, 0), then (40, 0) from 0.5 s, reads `TEXTURE_STRETCH` 32.181 (FAIL, `hai
|
|
|
3908
4084
|
triangle 258), two meshes folding under `ANIMATIONS_DO_NOT_FOLD` (FAIL; none without the
|
|
3909
4085
|
flag) and 8 `CLOTH_SETTLES` warnings for 9 (selftest `CK515`).
|
|
3910
4086
|
|
|
3911
|
-
**Physics seam environments** (issue #591). Default: wind [1, 0], gravity [0, 1]. Still: wind [0, 0], gravity [0, 1]. In rig-play, environment(null) returns to Default; still air requires an explicit wind [0, 0]. For a physics rig with readable declared pairs and animations, SEAM_OVER_MOTION adds optional `worlds.default` and `worlds.still` readings. They are informational raw gap/ghost cell counts (including cells below the warning floor), never new bars or warnings; neither changes PASS, exit status or the bar count. Each world records its vectors, status and rows; each row names its pair, animation, drawn/banded frames and gap/ghost maximum and worst frame, cell size and world box. Per-frame hits are not embedded in check.json. A rendered world's `dir` is relative to check.json (`seam_motion/default` or `seam_motion/still`): it retains the complete rigc render, including frames.json, frame images and each animation's seam.json with all raw hits. The directories are published with check.json only after the readings are validated; scratch is removed, and an unrendered SKIP has no directory reference. The original reading and any custom `--environment` schedule keep their existing meaning; the two reference worlds are independent of that schedule. A rig with no wind response reports Still as SKIP with its reason; no band is SKIP, never a measured zero. With no readable declared pair or animation no worlds block is written.
|
|
4087
|
+
**Physics seam environments** (issue #591). Default: wind [1, 0], gravity [0, 1]. Still: wind [0, 0], gravity [0, 1]. In rig-play, environment(null) returns to Default; still air requires an explicit wind [0, 0]. For a physics rig with readable declared pairs and animations, SEAM_OVER_MOTION adds optional `worlds.default` and `worlds.still` readings. They are informational raw gap/ghost cell counts (including cells below the warning floor), never new bars or warnings; neither changes PASS, exit status or the bar count. Each world records its vectors, status and rows; each row names its pair, animation, drawn/banded frames and gap/ghost maximum and worst frame, cell size and world box. Per-frame hits are not embedded in check.json. A rendered world's `dir` is relative to check.json (`seam_motion/default` or `seam_motion/still`): it retains the complete rigc render, including frames.json, frame images and each animation's seam.json with all raw hits. The directories are published with check.json only after the readings are validated; scratch is removed, and an unrendered SKIP has no directory reference. The original reading and any custom `--environment` schedule keep their existing meaning; the two reference worlds are independent of that schedule. A rig with no wind response reports Still as SKIP with its reason; no band is SKIP, never a measured zero. With no readable declared pair or animation no worlds block is written. The same declared pair list is used for both reference worlds: neighbouring limb segments, explicit seam requirements and the proven body-root declarations described below. Thigh/hem pairs are not inferred. Adding reference worlds to a nonphysics reading stays byte-identical, with no extra key, line or render; issue #686 separately adds body-root declarations and their active-reading bar. Reference renders start physics at frame 0 at 12 fps; they do not certify a composed player scene or another sampling rate. Malformed sidecars or renderer failures remain named refusals.
|
|
4088
|
+
|
|
4089
|
+
|
|
4090
|
+
**Body-root seam identity** (issue #686). A limb must have exactly one segment0 part. Its declared bone must have one named immediate parent; the root slot must bind that bone (or its declared turn child). Non-limb parts with `topwear` or `bottomwear` source provenance, a slot on that parent (directly or through its verified generated turn child) and a named default-skin drawing are candidates. The body-side child must match `applyTurn`'s exact generated name, unique identity bone and parent, control and per-part transform binding; a similarly named bone alone is not proof (issue #708). The original carrier and pair slot names do not change under turn; stock setup pose `render --seam` selects all matching drawings with `banded > 0` (its existing alpha-overlap band, without dilation), so one selects one pair and two select both pairs. When eligible candidates all return valid setup banded 0, that limb has no selected root pair: `unmeasuredRoots` retains its limb, bone, parent, segment0 part, candidates and named reason, reported as SKIP, not measured PASS. Part spelling, nearest geometry and shared mesh influences select nothing. On `wind` the pairs are `topwear|upperarm_r`, `topwear|upperarm_l`, `bottomwear|thigh_r` and `bottomwear|thigh_l`; “trunk” is not a part name. Existing pairs keep their order; a reversed explicit declaration deduplicates with the root pair and retains both declarations. An ambiguous/missing named binding, no eligible candidate, or unreadable/undrawn setup data is `CHECK_MOTION_SEAM_ROOT`, naming the part and candidates. Valid zero-band metadata is carried separately as optional `roots.unmeasured`, never as a fabricated measured pair. The all-zero root block remains present and its bar is skipped; measured FAIL takes precedence over SKIP, while measured PASS plus any unmeasured root stays SKIP. No body provenance leaves legacy pair selection unchanged and supplies no body-root coverage.
|
|
4091
|
+
|
|
4092
|
+
Renderer metadata and exact raster reads use the promised `rig-c/render-shared` entry (rig-c >=2.69.0 <3.0.0). It registers no Spine runtime; where that runtime resolves from rig-c's own package root, the existing `rig-c/render` entry registers the official Spine side explicitly. An install without Spine keeps rig-c's own candidate chooser and gate; candidate or loader failures never select a guessed fallback.
|
|
4093
|
+
|
|
4094
|
+
The same rig-c band and strict floor `px > round(max(box width, box height) / cell)` apply. A root GAP hit is exempt only when every cell centre of its whole world-cell box has full-frame composite alpha at least 128 (rig-c DRAWN_ALPHA), on the same rendered frame and cell grid. This whole-box exemption is a sufficient proof: the unknown GAP-cell subset is contained in that box. Any uncovered box cell retains the entire original GAP count, not a partially subtracted or exact visible count; this is the conservative branch. The same full-count rule applies to unavailable geometry, clipping, attachment metadata or an exact RGBA replay mismatch, with a named unavailable reason. The existing active render requests geometry only for roots; no extra render is made for this exemption and root-free calls load no compositor. Each examined root row adds `coverage` evidence with raw frame/count/cell/box, status (`exempt`, `conservative`, `unavailable`), whole-box cell/covered counts when available and a relative `root_gap_coverage/` JSON path; the sidecar retains the alpha grid, actual frame time and replay result. Exempted hits are not relabelled under-floor. Raw GAP/reference-world readings and the unchanged floor remain intact. Exact GAP-open/GAP-covered partitioning is deferred to rig-c/core#1556; this sufficient proof does not claim that API's complete visibility semantics. The root metric mode is `gap-only`: only a GAP in the active rendered environment fails `CHECK_SEAM_OVER_MOTION`, naming pair, animation, frame, GAP cells, cell size and world box. A mixed ghost is INFO: `owner unavailable in this rigc-seam/1 reading; see rig-c/core#1555`. A ghost is alpha drawn by one pair member from the rest overlap band; it is not proof that background shows. This mixed-ghost reader carries no proven drawing-owner binding, so root PASS does not certify UNDER-owned ghost coverage. That follow-up requires the released per-owner core API; no owner is inferred from a slot name or aggregate count. `SEAM_OVER_MOTION.roots` records `status` (`PASS`, `FAIL`, `SKIP`), `mode` (`gap-only`), `ghost_owner` (`unavailable`), `ghost_followup` (`rig-c/core#1555`), pair names, failed pair/animation count and an unavailable `reason`; root rows use GAP only for `opens`, `px`, `max_px`, `under_floor` and worst above-floor hit (`kind: gap`, `index`, `px`, `cell`, `box`). Their separate `ghost_info` preserves mixed ghost `max_px`, `worst`, frame count and unavailable owner; complete per-frame hits remain in rigc raw sidecars, not embedded here. `warnings` counts only existing warning pairs. The new root bar is counted once where declared, including named SKIP when any required root/animation has no band or reading; absence is not a zero or a PASS. A failed active root sets overall PASS false and exits 1. Existing internal-joint and explicit-only pairs remain warnings: their PASS, exit status and bar count are unchanged. The line can now be `FAIL`; reference worlds remain informational. No inferred thigh/hem or other geometric neighbours are added. This gate samples the supplied animations at12fps; it does not certify another motion or a player scene.
|
|
3912
4095
|
|
|
3913
4096
|
### compose
|
|
3914
4097
|
|
|
@@ -3967,16 +4150,71 @@ assemble*, at the end of this section):
|
|
|
3967
4150
|
max-channel |d| ≤ 1.0 of 255, and at most 50 **rig** pixels over 40 — the
|
|
3968
4151
|
frame pixels over 40 divided by s², `s` the frame scale the `seam:` line
|
|
3969
4152
|
prints and `check.json`'s `seam_frame_scale` holds (issue #216). The frame
|
|
3970
|
-
|
|
3971
|
-
|
|
3972
|
-
|
|
3973
|
-
|
|
3974
|
-
|
|
3975
|
-
|
|
3976
|
-
|
|
3977
|
-
|
|
3978
|
-
|
|
3979
|
-
|
|
4153
|
+
count is still divided by s². Since issue #705 its acceptance frame is instead
|
|
4154
|
+
pinned to a common source-relative integer **scale1** lattice. U includes the
|
|
4155
|
+
authored stage and every final drawn/posed vertex (transparent margins included)
|
|
4156
|
+
of base and all actually checked sets, over every still frame. It is computed
|
|
4157
|
+
once, state by state from official selected/clipped pieces; atlas/poser closures
|
|
4158
|
+
are released per state, retaining only finite bounds and identities. Odd-width
|
|
4159
|
+
source origins retain their half-integer phase. The public disjoint-third-part
|
|
4160
|
+
baseline read4.64,4.80,8.87 with unchanged original geometry; those are historical
|
|
4161
|
+
observations, not expectations or the consumer's private figures. Source,
|
|
4162
|
+
blink, physics and motion-root readings retain their original frames.
|
|
4163
|
+
|
|
4164
|
+
Write D for authored width x height cells, B for its original declared scene
|
|
4165
|
+
border, A=|D minus B|>0 (B empty for non-scenes). **A never grows with U.** A
|
|
4166
|
+
non-scene numerator counts the entire U, including opaque art outside the
|
|
4167
|
+
authored canvas compared with reference background. A scene excludes its
|
|
4168
|
+
original border and everything outside its authored canvas, preserving its
|
|
4169
|
+
intentional-frame-edge contract. Base mean is the included maxRGB residual sum
|
|
4170
|
+
divided by A; a set applies its semantic effect selector to that same numerator
|
|
4171
|
+
and denominator. Counts over40/80 use the same inclusion. Existing rounded mean
|
|
4172
|
+
<=1.0 and one aggregate<=50 rig pixels over40 remain; no per-pair allowance,
|
|
4173
|
+
mask-size denominator or padding dilution. Base failure remains overall failure.
|
|
4174
|
+
|
|
4175
|
+
All states reuse existing gated builds: one extra stock seam render per state,
|
|
4176
|
+
plus official in-process bound/semantic-support work. U dimensions are reported;
|
|
4177
|
+
a larger U costs more pixels, not a free operation. Strict pinned.outside=[]
|
|
4178
|
+
proves complete drawn geometry within U; it does not claim alpha outside D is
|
|
4179
|
+
zero. Finite source-relative offsets must be exactly representable in the
|
|
4180
|
+
float32 warp map. An unavailable, unrepresentable or oversized union refuses
|
|
4181
|
+
CHECK_SEAM_DOMAIN before union allocation, never a guessed/fallback box. The
|
|
4182
|
+
known minimum two RGBA frames plus Float32 RGB warp/source require20U+12D bytes;
|
|
4183
|
+
if that alone exceeds the existing6GiB execution budget it refuses. This is a
|
|
4184
|
+
preflight lower bound, not proof of total memory acceptance.
|
|
4185
|
+
|
|
4186
|
+
Effect selection compares exact ordered source alpha-gather stacks and the
|
|
4187
|
+
official renderer's posed contributor stacks, before observing residuals. Source
|
|
4188
|
+
signatures retain the selected original rig/skin attachment mapping (including
|
|
4189
|
+
source UVs, triangles and weights), its own resolved image content and actual
|
|
4190
|
+
posed vertices/colour. Packed page bytes, atlas UV/page coordinates and global
|
|
4191
|
+
piece indices do not define a drawing change. Unsupported mapping or missing
|
|
4192
|
+
binding carries a deterministic named `unavailable` cause and includes the
|
|
4193
|
+
whole set conservatively.
|
|
4194
|
+
Replacement, hide, front placement, posed descendants, order/gather changes
|
|
4195
|
+
and third-drawing occlusion can affect an otherwise unnamed base pair. Equal
|
|
4196
|
+
known stacks inherit the base reading; set names alone cannot exclude a pair.
|
|
4197
|
+
Singleton/no-art reference support or unavailable posed provenance includes
|
|
4198
|
+
the cells conservatively. Complete contributing stacks retain translucent
|
|
4199
|
+
dependencies, including lower drawings; inclusion is conservative, not an
|
|
4200
|
+
assertion that every included drawing is visibly exposed.
|
|
4201
|
+
|
|
4202
|
+
The top-level seam fields are the canonical base verdict, and `sets.<name>`
|
|
4203
|
+
uses the canonical **affected** numerator. `seam_scope` states that scope,
|
|
4204
|
+
fixed `denominator_px`, full canonical `whole` residual and diagnostic
|
|
4205
|
+
`auto_frame_raw` with its own viewport, unrounded mean and counts. Public
|
|
4206
|
+
`domain.states` records each state name, frame/piece counts, world bounds and
|
|
4207
|
+
`pose_sha256`. Each set
|
|
4208
|
+
also records effect/inheritance reasons and every raw pair's whole, affected
|
|
4209
|
+
and inherited counts. `whole_pairs` preserves full canonical raw rows, including
|
|
4210
|
+
frame/rig boxes and cut metadata, but omits `picture` rather than naming an
|
|
4211
|
+
unwritten image; an inherited failure is retained by the base, not
|
|
4212
|
+
silently blessed or judged again for the set. `barsNotMet`, named failures
|
|
4213
|
+
and the console's seam figures use these same canonical acceptance fields.
|
|
4214
|
+
`--keep-stills` retains those seam frames under `setup_still/`, and the original
|
|
4215
|
+
auto-fitted diagnostic frames separately under `setup_still_auto/`.
|
|
4216
|
+
|
|
4217
|
+
The bar reads one
|
|
3980
4218
|
frame, the setup-pose still, never the idle. When it fails (or when `check
|
|
3981
4219
|
--seam-pairs` asks, or `build --seam-pairs`, which forwards it, pass or fail), the pixels over 40 are split by the pair of
|
|
3982
4220
|
parts that answers for each (issue #202): the two parts drawn last among those
|
|
@@ -4406,7 +4644,7 @@ it reads is there, and says SKIP with the reason when it is not:
|
|
|
4406
4644
|
| `ANIMATIONS_DO_NOT_FOLD` | every animation, the idle included, through `rigc render --folds` | never SKIP: written when `motion.json` holds an animation, the idle alone included (issue #333), absent when it holds none (with or without a `parts.json`) |
|
|
4407
4645
|
| `STRESS_OFF_CHAIN` | `parts.json`'s tags, the idle's chains, `rig.json`'s weights, and a turned copy rigc poses | written only when `parts.json` names a `handwear` part and there is an idle (absent on a rig with no `parts.json`); SKIP when no such part rides exactly one chain, each part's reason |
|
|
4408
4646
|
| `SEAM_OVER_RANGE` | `parts.json`'s limb records with a `range`, and a bent copy rigc renders | written only when a limb record carries a `range` (absent on a rig with no `parts.json`); never SKIP — a joint it cannot read is a FAIL naming why |
|
|
4409
|
-
| `SEAM_OVER_MOTION` | `parts.json`
|
|
4647
|
+
| `SEAM_OVER_MOTION` | `parts.json` limb records, proven body-root bindings in `rig.json`, `--requirements` seams, and every animation through `rigc render --seam` | body-root GAP alone gates (gap-only); mixed ghost is informational until per-owner core data is available; existing pairs stay warnings. SKIP names absent parts, pairs, animations or bands; unavailable is never measured zero |
|
|
4410
4648
|
| `RECOMPOSITE_HOLES` | `parts.json`'s `recomposite` block | no `parts.json`, or no block |
|
|
4411
4649
|
| `SETUP_POSE_VS_SOURCE` | the rig spec and the painting | no `--source` |
|
|
4412
4650
|
|
|
@@ -4442,7 +4680,7 @@ single-character path (§4, steps 0–9) on its own, already isolated input to a
|
|
|
4442
4680
|
| `characters[].build` | a `build --out` directory (relative to the scene file) whose own `check/check.json` is green |
|
|
4443
4681
|
| `characters[].offset` | `[x, y]`, a translation from the build's rig px to canvas px. Every character is built at one `assemble.rig_scale`, so its rig px are canvas px at scale 1 |
|
|
4444
4682
|
| `characters[].scale` | optional, a positive number; absent is 1, and 1 composes to the bytes a scene without the key writes. The character's size on the canvas, about its stage's top-left corner: a rig px `p` lands at canvas px `scale * p + offset` (issue #197). A character scaled up past its art is drawn soft — the art is not resampled; rebuild it at a higher `assemble.rig_scale` if that matters |
|
|
4445
|
-
| `characters[].accept` | optional, a list of bar names: the bars this character's own check may have failed and still be composed (issue #203). `compose --accept <bar>[,<bar>…]` is the same list for every character; the two are joined, so the command line applies to every character and a character's list adds to it. Each name is one of the bars `check`'s summary names, less the gate — `loop`, `seam`, `BREATH_VISIBLE`, `BLINK_NO_HOLE`, `CHAIN_LAG`, `TIP_OVER_ROOT`, `STILL_REGIONS_DARK`, `TEXTURE_STRETCH`, `ANIMATIONS_DO_NOT_FOLD` (issue #320), `STRESS_OFF_CHAIN` (issue #347); anything else is `SCENE_ACCEPT_KNOWN`. A build is taken when every bar its `check.json` failed is named; its gate red, a declared requirement not PASS, or a bar not named is `SCENE_BUILD_GREEN` as before. **It is for looking, not for shipping:** the `[compose]` line says which failing bars were accepted, `scene.json` records them as the character's `accepted`, the composed rig's own check measures them again and reports them as it finds them, and the run exits 1 even when that check is PASS (a composed rig has no `parts.json`, so the seam and four judgement lines say SKIP there). A list that accepts nothing — every build green — composes to the bytes a scene without one writes |
|
|
4683
|
+
| `characters[].accept` | optional, a list of bar names: the bars this character's own check may have failed and still be composed (issue #203). `compose --accept <bar>[,<bar>…]` is the same list for every character; the two are joined, so the command line applies to every character and a character's list adds to it. Each name is one of the bars `check`'s summary names, less the gate — `loop`, `seam`, `BREATH_VISIBLE`, `BLINK_NO_HOLE`, `CHAIN_LAG`, `TIP_OVER_ROOT`, `STILL_REGIONS_DARK`, `TEXTURE_STRETCH`, `ANIMATIONS_DO_NOT_FOLD` (issue #320), `STRESS_OFF_CHAIN` (issue #347), `SEAM_OVER_MOTION` (the body-root bar, issue #686); anything else is `SCENE_ACCEPT_KNOWN`. A build is taken when every bar its `check.json` failed is named; its gate red, a declared requirement not PASS, or a bar not named is `SCENE_BUILD_GREEN` as before. **It is for looking, not for shipping:** the `[compose]` line says which failing bars were accepted, `scene.json` records them as the character's `accepted`, the composed rig's own check measures them again and reports them as it finds them, and the run exits 1 even when that check is PASS (a composed rig has no `parts.json`, so the seam and four judgement lines say SKIP there). A list that accepts nothing — every build green — composes to the bytes a scene without one writes |
|
|
4446
4684
|
| `order` | the draw order, back to front: a character id (its slots not named elsewhere, in its own order) or one `<id>:<slot>`. Every slot of every character is drawn exactly once. Interleaving is written by naming slots: `["a", "b:arm_l", "b"]` draws `b`'s left arm between `a` and the rest of `b` |
|
|
4447
4685
|
|
|
4448
4686
|
What is composed:
|