@rig-c/parts 1.36.0 → 1.38.0

package/cli.ts

@@ -168,7 +168,11 @@ usage:
       the neck -> hips line and each sleeve chain along shoulder -> wrist
       instead of by screen y, and prints the rule set it used first. Without
       --keypoints nothing changes. A wrist holds a part when it lies within
-      ${WRIST_ON_PART_PX} px of its art (the larger of the x and y gaps);
+      ${WRIST_ON_PART_PX} px of its art (the larger of the x and y gaps); when a hanging
+      arm's wrist lands off its arm layer (e.g. on a skirt below the hand), the
+      sleeve chain's tip is placed at the bottom extent of the arm layer, the
+      elbow cut comes from the limb chain, and a PROPOSE_WRIST_OFF_LAYER note
+      names the layer it landed on (issue #491).
       --wrist-snap <px>, an integer above ${WRIST_ON_PART_PX}, binds a wrist on no
       part to the one nearest part within <px>, said in a "wrist snap:" note
       (with --keypoints, not with --from-config). Without it nothing changes.

package/docs/AUTHORING.md

@@ -104,11 +104,12 @@ read by no CPU stage).
 | `seethrough.head_box` | inputs (cuts the head image there; optional at the first call); assemble — where the head run sits on the painting | **proposed** by `propose --head-box` from the full run, square, source pixels, shifted inside the painting when needed; the head run must then be fed exactly that crop. With one run (no `--head`, issue #359: an artist's own file, §4 *For artists*) it is left out — there is no crop to place — and a config that sets it is refused (`ASSEMBLE_SINGLE_RUN_HEAD_BOX`) |
 | `seethrough.arm_split` | assemble, `assemble --propose-plan` — separates a single full-run `handwear-r` or `handwear-l` layer that holds both overlapping arms into both arm tags | **authored**, optional (issue #439): `{x?: number, line?: [[x, y], …], order: ["handwear-r", "handwear-l"] \| ["handwear-l", "handwear-r"]}` in `seethrough.resolution` full-run pixels. Exactly one of `x` (image column, `0 <= x <= resolution`) or `line` (a polyline of two or more `[x, y]` points in `[0, resolution]`, interpolated in x along y and clamped above/below its endpoints) is required (`CONFIG_FIELD_PRESENT`, `CONFIG_FIELD_TYPE`), and `order` is `[back_tag, front_tag]`, the draw order of the two separated arm layers (`CONFIG_FIELD_PRESENT`, `CONFIG_FIELD_TYPE`). Pixels at `< splitX(y)` go to `handwear-r` (image left, the subject's right arm) and pixels at `>= splitX(y)` go to `handwear-l` (image right, the subject's left arm). A split line that cuts a horizontal opaque run of the arm layer into more than two segments is refused (`ASSEMBLE_ARM_SPLIT_CUTS_ARM`). Without the declaration, when one arm layer's 8-connected component reaches both wrists under `propose --keypoints`, `propose` emits an `overlapping-arms` `LINT` naming the part, both wrists and `seethrough.arm_split`; absent, no byte of any output moves |
 | `assemble.rig_scale` | assemble — the rig is `trunc(w × rig_scale)` x `trunc(h × rig_scale)`, and every rig-px value after it (`bones`, `meshes`, `motion`, `patches`, `cuts`) is in that rig's pixels; `check --source` (`CHECK_SOURCE_SIZE`) and `compose` (`SCENE_RIG_SCALE_AGREES`) read it back off `parts.json` | authored; rig pixels per source pixel. 0.5 in both examples (a 1664x2432 painting makes an 832x1216 rig). **Keep the figure about 1,100 to 1,200 rig px tall** — the `H` of `propose`'s `mesh spacing:` note, the height of the parts' boxes together — so for another painting, about 1,150 over the figure's height in painting px: that is the size the proposer's spacing divisor was calibrated at (H 1106–1185, the `mesh spacing` note says so) and the size of the two examples `check`'s bars are derived from, and the proposer and `check` also hold fixed rig-px values that do not scale with it (the fringe's 10 px step, the trunk segments' 18, 20, 30 and 100 px, the 15 px wrist tolerance, the 10-row pendant floor, the seam bar's 50 rig px over 40). What else it trades, measured on `demo` with the README loop from a fresh config at 0.25, 0.5 and 1 (issue #345, rig-c 2.47.1): the same plan and the same ten chains; every bar but the one the uncorrected `demo` always fails (`bottomwear` `TIP_OVER_ROOT`, the README loop's `RL01`) passing at all three; the atlas page 418x606, 832x1205 and 1825x2047; the figure's mesh spacing 16, 32 and 64, so 830, 868 and 932 triangles; the breath 2.5 % of a torso that scales with it; and the proposed bones, scaled to 0.5, off the 0.5 proposal's by up to 38 px at 0.25 and 22.5 px at 1 (the hairpin's origin; the skirt roots 20 and 10.5) — the fixed-px values above. `propose` records it on the proposal as `proposed_rig_scale` (issue #354), and changing `assemble.rig_scale` after the rig sections are written is refused (`CONFIG_PROPOSED_RIG_SCALE`): without that refusal `demo`'s tracked config built at 0.25 gated green and `check` failed only `TIP_OVER_ROOT` on both sleeves (`propose --from-config` named 54 `LINT` lines, links off the art) — re-run `assemble` and `propose` at the new scale. Absent: `CONFIG_FIELD_PRESENT`; 0, negative or not a number: `CONFIG_FIELD_TYPE`; a rig under 1x1: `ASSEMBLE_RIG_SIZE` |
-| `assemble.plan` | assemble; also the list every `meshes`/`regions` key must come from | **proposed** by `assemble --propose-plan`. `[part name, "full" \| "head", See-through tag]`, in draw order back to front. Names are free; roles come from the tag. A layer the author made and added to a run takes `author:<label>` in the tag's place, and has no role (§5, *A layer the author made*) |
+| `assemble.plan` | assemble; also the list every `meshes`/`regions` key must come from | **proposed** by `assemble --propose-plan`. `[part name, "full" \| "head", See-through tag]`, in draw order back to front. Names are free; roles come from the tag. A layer the author made and added to a run takes `author:<label>` in the tag's place, and has no role (§5, *A layer the author made*). When `generation.control.skeleton` is present and a full-run `handwear-r` or `handwear-l` layer merges sleeve, bare hand and overgarment drape into one layer — a skin-coloured hand cluster (`>= 40` run px, `GHOST_MIN_AREA`, measured `516..4,787` run px across the 9-standee corpus) lies within `0.35` forearm lengths of `<s>_wrist` and non-skin pixels reach more than `1.0x` the forearm length (`<s>_elbow -> <s>_wrist`) below `<s>_wrist` (issue #490; measured `-0.15x..0.45x` on the 6 clean standees vs `1.25x..2.02x` on the 3 merged standees, placing `1.0x` inside the `0.45x..1.25x` gap) — the layer is split into `drape-<s>`, `handwear-<s>` and `hand-<s>` (back to front) when the Euclidean RGB distance between the sleeve median colour above `<s>_wrist` and the drape median colour below `<s>_wrist` is at least `80` (`ARM_DRAPE_COLOR_DISTANCE`, measured `103.6..236.0` on the two distinct-colour merged standees vs `20.8..28.2` on the same-colour merged standee, placing `80` between `28.2` and `103.6`), or refused with `SEETHROUGH_ARM_RUN_MERGED` when the distance is under `80` |
 | `assemble.extend_below_crop` | assemble | **proposed** with the plan: `{part, run, tag}` — a head-run part that reaches the bottom of the head crop is continued from a full-run layer, whole connected components |
 | `assemble.patches` | assemble; `meshes`/`regions` keys may name them too | **authored**, optional: `[{name, box, alpha, draw}]` — an extra part cut from the **painting** itself, for figure no See-through layer holds (a hem both runs dropped). `box` is `[x0, y0, x1, y1]` in **rig** pixels, `x1`/`y1` exclusive — the space of `parts.json` and `recomposite_rig.png`, where the hole is found; `alpha` is `"silhouette"` (the painting's figure silhouette inside the box, the one `--seam silhouette` uses) or `"box"` (the whole box); `draw` is `"back"`, `"front"` or `{"before": "<plan part>"}`. A patch is always a region: its bone is `regions.<name>`, in the one place every region's bone lives, and a `meshes` entry for it is refused. See §5 for how to place one |
 | `assemble.cuts` | assemble; `meshes`/`regions` keys may name the new parts too, and must (each is a part like any other) | **authored**, optional (issue #170): `[{from, into, polygon, draw, overlap, under, under_fill}]`, `under` and `under_fill` optional — a plan part's layer cut by a polygon the author draws: the pixels of plan part `from` whose **centre** lies inside `polygon` (even-odd; a centre exactly on an edge is outside) leave `from` and make the new part `into`, colour and alpha, so every pixel of the layer ends in exactly one of the two. `polygon` is `[[x, y], …]`, at least three points, non-negative integer **rig** pixels — the space of `parts.json` and of the patches' boxes. The file that shows the layer in those coordinates is `assemble`'s own `rig/parts/<from>.png`, placed at its `parts.json` `x`, `y` (the PNG's pixel `(i, j)` is rig pixel `(x + i, y + j)`), or `render/recomposite_rig.png`, the whole rig 1:1; the contact sheets (`sheet`) are scaled and carry no coordinates. `draw` is `"back"`, `"front"` or `{"before": "<plan part>"}`, as for a patch (to keep the setup pose, draw the piece immediately in front of `from` — `{"before": "<the plan part after from>"}`, or `"front"` when `from` is the last plan part; `{"before": "<from>"}` draws it behind `from`, which `under` refuses as `ASSEMBLE_UNDER_DRAW` because the fill would hide it). `from` must be a plan part (`CONFIG_NAME_RESOLVES`; a patch or another cut's piece is refused), `into` a new name (`CONFIG_PART_UNIQUE`), the polygon three or more integer points (`CONFIG_FIELD_TYPE`). The piece's `parts.json` record carries `from`'s `<run>:<tag>` and its own counts, each split from the layer's by where the pixel lies; it is a mesh or a region under its own name, and the coverage rule holds it like a plan part. What the config cannot know the stage refuses: a polygon point past the rig (`ASSEMBLE_CUT_INSIDE`), two cuts of one part sharing a pixel (`ASSEMBLE_CUT_OVERLAP`), a cut that takes none of the layer's opaque pixels or leaves `from` none (`ASSEMBLE_CUT_PIXELS`). `overlap` is required, a non-negative integer of rig pixels with no default (`CONFIG_FIELD_TYPE`): the **band** — the polygon's pixels within `overlap` px of its edge by Chebyshev distance (the polygon's mask less its erosion by a `2 * overlap + 1` square) — stays in `from` as well as going to the piece, so the piece's resampled edge has art under it; the counts stay a strict partition and the band is the base's extra copy, printed on the `cut:` line. At `0` the two abut and `check`'s seam bar judges the edge between them (`CHECK_SEAM_WITHIN_BAR`, §5). A band only covers the edge at rest: a piece that swings well clear of where it was painted shows the hole it leaves, and a thin piece's band shows a ghost of the piece. `under` (issue #193), optional, is the author's image of what lies under the piece: a PNG path relative to the config's directory (`CONFIG_FIELD_TYPE` unless a non-empty string), in rig pixels over the polygon's **bounding box** — the least and greatest polygon x and y, so the image is `max x − min x` by `max y − min y` and its pixel `(i, j)` is rig pixel `(min x + i, min y + j)`. Where the cut removed pixels from `from` — the piece's pixels (alpha above 0) less the band — `from` takes the image's pixel, colour and alpha wherever the image's alpha is at least the alpha the cut removed there (**filled**); elsewhere `from` stays empty there (**left empty**): a transparent pixel is the author's statement that nothing lies under it (the background, or a part drawn behind), and a less opaque one is not half-filled. The image is read nowhere else, so its pixels over the band, over the box outside the polygon or where the layer had no art never change `from`. The `cut:` line then ends `; under <n> px filled, <m> px left empty` (`n + m` is every removed pixel), so an unintended hole is a number in the log, not a guess; the filled pixels count in `from`'s `opaque_px` and `occluded_px` (the piece is drawn over them), never as visible or projected. The stage refuses: a file that is not there (`ASSEMBLE_UNDER_PRESENT`) or not a PNG (`ASSEMBLE_UNDER_DECODES`), an image not exactly the box's size (`ASSEMBLE_UNDER_SIZE`, both sizes given), an image that fills none of the removed pixels — all transparent there, or another file (`ASSEMBLE_UNDER_EMPTY`; to leave the whole hole, drop `under`), and a piece drawn behind `from` (`ASSEMBLE_UNDER_DRAW`: the fill would hide it; draw it `"front"` or `{"before": "<the plan part after from>"}`). Producing the image is the author's, by whatever means; absent, `from` keeps only its band. `under_fill` (issue #360), optional, is the one value `"colour"` (`CONFIG_FIELD_TYPE` on any other): the same pixels are filled and left empty, and a filled pixel takes the image's **colour** at the alpha the cut removed there instead of the image's alpha, so `from`'s alpha is the uncut layer's wherever the image fills and its silhouette does not grow — an opaque image over a soft edge leaves the edge soft. It applies to the part's hidden-art layer as well as to a file; a cut with neither is refused (`ASSEMBLE_UNDER_FILL_SOURCE`). The `cut:` line's filled count then says how many took the colour only: `; under 190 px filled (190 colour only, at the alpha the cut removed), 0 px left empty`. Absent, a filled pixel takes the image's colour and alpha, as above |
 | `assemble.alternates` | assemble, rig, check (`--set`, `--all-sets`) | **authored**, optional (issues #454, #465, #472, #473, #476): `[{name, source?, full?, head?, head_box?, parts?, hides?, cuts?, skeleton?, drawn?}]` — alternate painting sets assembled into `<out>/rig/parts/<set>_<part>.png` (`parts.json` `alternates`), attached on each covered slot in `rig.json` as `<set>_<part>` beside the base attachment, and indexed in `<out>/rig/sets.json` (`rig-parts-sets/1`: `sets.<set>.slots`, `.hides`, `.drawn` when present, and `.threshold: {yaw: 15, pitch: 12}` when the set replaces `face` on a rig with `turn` or `turn`/`tilt` slider animations). `source`, `full` and `head` may instead be given on the CLI with `--alt <name>=<source>:<full>[:<head>]`. `parts` lists the subset of parts the set replaces (default: every part not in `hides`); a **subset set** (issue #473, e.g. mouth visemes `a`, `i`, `u` with `"parts": ["mouth"]`) cuts only its covered parts from the alternate runs (refusing with `ASSEMBLE_ALT_INPUT_PRESENT` if a covered part's layer is missing or empty), writes only `{slot: "<set>_<slot>"}` in `sets.json` so `@rig-c/play`'s `setSet(name)` switches those slots while leaving every other slot on its base attachment (and `setSet(null)` restores the base pose), may be keyed on a slot attachment track in `motion.animations_from` as `{"t": …, "set": "<name>" \| null}` (`CONFIG_SET_COVERS_SLOT` if `"set"` is undeclared or does not cover the track's slot), and under `check --set <name>` counts `ANIMATIONS_DO_NOT_FOLD` only on its own covered slots; `hides` lists slots the set hides (`null` in `sets.json`). A **gesture subset set** (issue #476) covers a limb chain declared in `config.limbs.<limb>` (all of its segment `part`s, cut at the base's joints posed to the set's own `drawn` angles by `poseBoneEntriesForDrawn`; naming the unsplit `from` layer, covering only some segments of the limb, or declaring polygon `cuts` on a limb set is refused with `CONFIG_LIMB_SET_JOINTS`) and carries `drawn` (or `skeleton`) for the covered bones only (giving `drawn` for an uncovered bone is refused with `CONFIG_SET_COVERS_BONE` / `RIG_SET_COVERS_BONE`; uncovered bones keep the base's `drawn`). `skeleton` (a pose file path relative to the config's directory, `{"width": W, "height": H, "points": {…}}` with all 18 body-18 keypoints on the canvas, validated by the same rules as `generation.control.skeleton`: `CONFIG_FILE_PRESENT`, `CONFIG_IS_JSON`, `CONFIG_FIELD_TYPE`, `CONFIG_KEY_KNOWN`, `CONFIG_KEY_UNIQUE`, `CONFIG_POSE_CANVAS`, `CONFIG_POSE_KEYPOINTS`, `CONFIG_POSE_IN_CANVAS`) or `drawn` (`{<bone>: <worldDegrees>}`, each bone resolved against `bones`, `CONFIG_NAME_RESOLVES`) declares the posed angles the alternate was painted at (issue #465); when `skeleton` is given, `assemble` derives `drawn` from its 18 keypoints (filtered to covered bones on a subset set, with `drawn` overriding any bone named in both), records both `skeleton` (scaled by `assemble.rig_scale` to rig px) and `drawn` in `parts.json` `alternates`, and the `rig` stage writes `<set>_*` region and mesh attachments in the bone-local frame of `poseRigBonesForDrawn(bones, drawn)` (weighting limb segments directly from `skeleton`'s joint endpoints when `skeleton` is present) and emits `drawn` in `sets.json` so `rig-pose` and `check --set <name>` / `--all-sets` pose the bones at `drawn` without rotating the already-posed art a second time |
+| `assemble.head_face_underfill` | assemble, `assemble --propose-plan` | **authored**, optional (issue #492): `boolean` (`CONFIG_FIELD_TYPE` on any other). When both runs exist and `full:face` has at least `200` opaque run px (`PROPOSE_MIN_PX`), the stage maps `full:face` into the head canvas via `fullLayerToHead` and measures how much of its hole-filled silhouette (`alpha > 8`) is covered by `head:face` (`alpha > 8`). A head-run `face` covering less than `75 %` (`HEAD_FACE_COVERAGE_FLOOR`, measured `0.0 %..48.6 %` on hollow/omitted head runs vs `84.8 %..99.6 %` on clean head runs across the 4 public examples and 9-standee corpus) is refused with `SEETHROUGH_HEAD_RUN_HOLLOW` unless `head_face_underfill: true` is declared. When `head_face_underfill: true` is declared and `head:face` exists (`opaqueRunPx >= 200`), `fullLayerToHead(full:face)` is composited under `head:face` on the head canvas (`alpha = max(headAlpha, fullAlpha)`, RGB blended by `headAlpha / 255`) before `head:face` is placed in rig space (`underfill=<N>px(full:face)` on the `face` part log line and a `face: head_face_underfill composited …` note in `assemble --propose-plan`). The fill restores transparent pixels only and leaves the cut's own edge where it is — a hollow whose edge is not under hair stays visible, and that is the author's to fix at the cut. When `head:face` has fewer than `200` opaque pixels, `SEETHROUGH_HEAD_RUN_HOLLOW` still fires even under `head_face_underfill: true` because the head run omitted the face layer and cannot supply a jawline |
 | `limbs` | assemble (the cut and the caps), rig (through `regions`), check (`LIMB_ONE_BONE`) | **proposed** by `propose --keypoints` (issue #349), then checked: `{<limb>: {segments: [{part, from, bone}, {part, from, bone, joint, range?, cap?, edge?, cap_shape?, cut_band?}, …]}}`, the upper segment first. The rule is *Limbs: cut at their joints* below the table. `part` is a new part (`CONFIG_PART_NAME`, `CONFIG_PART_UNIQUE` against the plan, patches, cuts and every other limb part); `from` a plan part or a cut's piece (`CONFIG_NAME_RESOLVES`) — the layer the segment's pixels come from, which is cut into the limb parts and is not itself made: a `meshes` or `regions` entry for it is `CONFIG_NAME_RESOLVES`, and the segments of one limb that take one part are consecutive (`CONFIG_LIMB_FROM_RUN`); `bone` a declared bone, each segment's the child of the one before (`CONFIG_LIMB_BONES_CHAIN`); the upper segment names no `joint`, `range`, `cap`, `edge`, `cap_shape` or `cut_band` (`CONFIG_KEY_KNOWN`), every other names its `joint` (`CONFIG_FIELD_PRESENT`) — the joint is its bone's origin; `range` is `[min, max]` degrees from rest with `min <= 0 <= max` (`CONFIG_LIMB_RANGE`), which `assemble` writes into the lower part's `parts.json` record and `check` poses the joint at — its two ends and its middle — reading the seam there (`SEAM_OVER_RANGE`, issue #360; rig-c needs no rotation limit); `cap` a PNG path relative to the config's directory (`CONFIG_FIELD_TYPE`); `edge` `"feather"` and `cap_shape` `"disc"` (issue #360), each the one value its field takes (`CONFIG_FIELD_TYPE` on any other) — the cut's geometry at that joint, *Limbs: cut at their joints* below; absent, the cut is hard and the cap the layer's half-disc of half the limb's width; `cut_band` a whole number of px, 1 or more (`CONFIG_FIELD_TYPE`), on a segment that takes the segment above's part — between two layers nothing is cut, so a band there is `CONFIG_KEY_KNOWN` — places the cut within that many px of the joint line (issue #360, *Limbs: cut at their joints*); absent, the cut is the joint line. Each limb part is attached like any part — `regions.<part>`, which must be the segment's `bone` (`CONFIG_LIMB_BONE`), or a mesh, which `check` holds to that bone alone (`LIMB_ONE_BONE`). With `limbs`, `assemble` reads `bones` too (`CONFIG_FIELD_PRESENT` without it). Absent, nothing is cut at a joint and no byte of any output moves |
 | `bones` | rig; `propose --from-config` | **proposed** by `propose`, then corrected. A single bone `{name, parent, at, tip?}` or a chain `{chain, parent, points, tip, link_inherit?}` whose links are named `<chain>0 … <chain>n`. Parents come before children. In `rig.json` each link is **turned along its chain** — `rotation` is the direction from its origin to the next link's (the last link's to `tip`) and `length` that distance (issue #73), so a physics constraint added downstream finds a lever; under `--idle-keys ctl` the link's `<link>_ctl` carries the turn and the length and the link sits at local rotation 0 beneath it. A single bone with a `tip` is turned the same way, towards its tip, with that distance as its length (issue #239); a tip on the bone's own origin is refused (`RIG_TIP_DISTINCT`). The five face bones `eye_r`, `eye_l`, `brow_r`, `brow_l` and `mouth` (by name, when one has no tip of its own) are turned to the eye line — the line through the origins of `eye_r` and `eye_l` as `bones` writes them, read image-left to image-right, drawn when parts.json holds both an `eyewhite-r` and an `eyewhite-l` part — so the blink's `scaley` squashes across the eye line on a tilted head; move an eye bone and the line moves with it. With one eyewhite or none, or an eye bone missing, the rig stage's `face axis:` line says so and they keep the page's axes. A bone under a face bone keeps the face's axis. With the line, `rig.json` also declares `invariants.axes` — one entry, `"face"`, through `eye_r` and `eye_l`, holding the turned face bones (and their controls) — so rig-c's gate holds the build to the line; the line is the one rigc draws through the same two bones, so the tolerance is only the float floor — the largest gap the emitted (float32) bones have to it, rounded up to 6 places plus one 6-place unit — and the `face axis:` line prints it. With the line the rig stage also adds `head_up` (issue #250): a slotless bone under `head`, at head's origin, turned to the eye line + 90 degrees and as long as the eye midpoint lies from head's origin along that axis — the head's frame, which a rule that needs it reads; `head` keeps its own frame, so no key on it or under it changes meaning, and a config bone of that name is refused (`RIG_HEAD_UP_NAME_FREE`). A face bone with its own `tip` is held too (issue #258), in a second entry, `"face_tips"`, when its tip lies along the line within whole-pixel rounding — a tip written in whole pixels sits at most sqrt(2)/2 px off the point of the line it stands for, so its direction may sit up to asin((sqrt(2)/2) / length) degrees off — with its tolerance measured the same way; a tip further off is the bone's own axis, and the `face axis:` line names it with its gap and that bound. A failure is rig-c's `A51_BONES_LIE_ALONG_THEIR_DECLARED_AXIS` line, which names the bone and the fix (rig-c's `docs/AUTHORING.md` §3.7 and §5.2); with no line no entry is written and A51 reports SKIP. Every region on a turned bone is turned back, so the setup pose does not move. Any other single bone keeps world rotation 0; one whose parent is a link is turned back upright. A single bone may declare `inherit` (issue #348): what it takes from its parent's transform, one of rig-c's own mode names exactly as rig-c's table spells them — `normal`, `onlyTranslation`, `noRotationOrReflection`, `noScale`, `noScaleOrReflection` (rig-c's `RigBone.inherit`) — written to that bone in `rig.json` as declared; any other spelling, `"NoScale"` included (the runtime would fold its first letter; nothing here folds or maps), is refused (`CONFIG_BONE_INHERIT`), and a chain takes no `inherit` (`CONFIG_KEY_KNOWN`). A chain may instead declare `link_inherit` (issue #369), an object mapping its own expanded link names to those same modes, for example `"link_inherit": {"leg_r1": "noScale"}`. Only the named link changes; omitted links inherit normally. A key outside this chain is `CONFIG_NAME_RESOLVES`, with this chain's valid link names in the detail; a non-object or non-string mode is `CONFIG_FIELD_TYPE`, and another mode spelling is `CONFIG_BONE_INHERIT`. The mode is forwarded to the expanded link, or to its control under `--idle-keys ctl`, by the same rule as a single bone. This is an authored opt-in: `propose` does not add it. Its setup rotation is the turn from where rig-c's own poser puts the bone with no rotation of its own under that mode, so it still stands upright (or along its tip) at the setup pose. Where the idle gives the bone a `<bone>_ctl`, the mode goes on the control: the control is the bone the parent's rotation reaches, and the bone under it inherits normally, so the idle's keys moved onto the control still turn it. A foot that does not take its shin's rotation (`noRotationOrReflection` or `onlyTranslation`) keeps its shoe level while the leg is posed (`FEET_STAY_LEVEL`, §7); which mode is the author's. `noScale` keeps a shin or shoe's shape under a scaled parent but still takes the parent's rotation: a shoe that must also stay level needs a separate rotation constraint, for example a transform constraint from an unrotated bone. This does not change the proposed feet's existing inheritance or `FEET_STAY_LEVEL` default. An automatic mesh weighted through a bone with a mode other than `normal` gets no derived amplitude (its row names the bone) and no residual envelope (rig-c's `SKINNING_RANGE_UNSUPPORTED`). Absent, `rig.json` carries no `inherit` and no byte moves |
 | `meshes.<part>` | rig | **proposed**, then corrected. Exactly one of `grid` (the lattice: cell size, px — what `propose` writes: by default one spacing for the figure, round(H / 37) rig px with H the height of every part's box together, a part whose tenth of its short side is already coarser keeping that, and under `propose --grid-rule part` the reference's tenth of the part's short side clamped to 5..36, issue #265), `contour` (the outline mode, authored; the next row and "A contour mesh" below) or `auto` (the automatic mode, authored; "An automatic mesh" below) — two, or none, is `CONFIG_MESH_MODE`. In every mode: `r` (added to every distance before weighting: `w = 1/(d + r)²`), `segments` (a chain name, a bone name with a `tip`, or `[bone, [x0,y0], [x1,y1]]`), and, **authored**, optional, `exponent` (issue #161): a number above 0 that replaces the 2 in that rule, `w = 1/(d + r)^exponent` — a larger one hands each vertex more fully to its nearest bone; absent is 2 and changes no byte, a value that is not a number above 0 is `CONFIG_FIELD_TYPE` at `meshes.<part>.exponent`, and a declared one is echoed as `exponent` in the mesh's `mesh_report.json` row; the exponent is the distance rule's, so declared beside `rule: "heat"` it is refused (`CONFIG_FIELD_TYPE` at `meshes.<part>.exponent`). The segment list is the one authored decision about a layer: which bones may pull it. The slot's bone is the first segment's. Optional `rule` (issue #161): `"distance"` — the rule above, and what an absent `rule` means (every byte is the same) — or `"heat"`, bone heat over the part's own silhouette, in every mode: the lattice's art (alpha above 8, less any island a declared `stray` left out) with holes filled, or for `contour` and `auto` the silhouette their outline is traced from (that mode's art — alpha above 8 for `contour`, alpha 1 and above for `auto` — less any island a declared `stray` left out, holes filled, grown by its `margin`); each bound bone's sources are the silhouette pixels whose centre lies within 0.75 px of its segment (a pixel two bones reach goes to the nearer, a tie to the first listed), held at 1 for that bone and 0 for the others; the field is solved by row-major Gauss–Seidel over-relaxation to a sweep change under 1e-7 within 20000 sweeps; a vertex reads the nearest silhouette pixel and takes the same cap and floor (and `regions`) as the distance rule; `r` is not read. The mesh's `mesh_report.json` row gains `heat` (the constants, each bone's sources and sweeps, the residual). Any other value is `CONFIG_FIELD_TYPE`; a bound bone with no source pixel is `RIG_HEAT_BONE_SOURCE`, an island no bone has a source in `RIG_HEAT_ISLAND_SOURCE`, a solve past its sweep bound `RIG_HEAT_CONVERGED` — none is weighted 0. The rule is chosen per mesh, so `RIG_HEAT_BONE_SOURCE` names three remedies: move the segment onto the art, take the bone out of `segments`, or keep this part on the distance rule — the one to take when the bone anchors the part from outside its art (a torso bone under a neck), since the first moves a bone another part placed and the second drops the anchor (issue #303). On a lattice, `RIG_HEAT_ISLAND_SOURCE` on an island that is dust — at most 4 px and at most 0.1 % of the part's art px, `mesh-draft`'s line — names `meshes.<part>.stray` and the figure that leaves it out, with the value declared; an island above that line keeps the segment remedy, a real piece being a real authoring question |
@@ -311,7 +312,7 @@ What a joint with a position places, as given — no ratio is applied over it:
 | `neck` | `neck` | the rule: half way from the chin to the neck part's bottom (or 0.12 face heights below the chin), on the eye axis |
 | `hip` | the midpoint of `r_hip` and `l_hip` — a point between two joints, said as that | the hip rule (bottomwear top, the waist, or 0.32 of the figure); one hip alone is said to be unused |
 | `chest` | its rule, half way from neck to hip, taken along the line between the placed ends | the rule as before when neither end is a joint |
-| `sleeve_<s>` | `<s>_shoulder` → `<s>_elbow` (two links), tip at `<s>_wrist`, with the two-blob rule's first two amplitudes; the arm is a limb (issue #349), `arm_<s>`: its handwear part is cut at the elbow into `upperarm_<s>` on link 0 and `forearm_<s>` on link 1, each a region — no mesh, no chest stub — when every handwear part over 500 px holds one such wrist within 15 px of its art (the larger of the x and y gaps, the LINT's own tolerance), or is bound one by `--wrist-snap` (below); when pre-separated `handwear-r` and `handwear-l` parts cross so that `<s>_wrist` lies on the opaque art of its own side's `handwear-<s>` part and also within 15 px of the opposite side's `handwear-<other>` part, it resolves to its own side (issue #458) | the sleeve rule places every sleeve chain, and each arm joint's note says why: for a wrist on no part, `… lies on the art of no handwear part within 15 px, so it does not say which sleeve it ends; the nearest is <part>, <d> px from its art by the larger of the x and y gaps (--wrist-snap <d> would bind it)` — `(beyond --wrist-snap <px>)` when the flag was given and fell short, and `the nearest are <a> and <b>, each <d> px …, so no tolerance says which` when two parts tie |
+| `sleeve_<s>` | `<s>_shoulder` → `<s>_elbow` (two links), tip at `<s>_wrist`, with the two-blob rule's first two amplitudes; the arm is a limb (issue #349), `arm_<s>`: its handwear part is cut at the elbow into `upperarm_<s>` on link 0 and `forearm_<s>` on link 1, each a region — no mesh, no chest stub — when every handwear part over 500 px holds one such wrist within 15 px of its art (the larger of the x and y gaps, the LINT's own tolerance), is bound one by `--wrist-snap` (below), or is that side's hanging arm whose wrist drifted off the arm layer onto another layer (issue #491, below); when pre-separated `handwear-r` and `handwear-l` parts cross so that `<s>_wrist` lies on the opaque art of its own side's `handwear-<s>` part and also within 15 px of the opposite side's `handwear-<other>` part, it resolves to its own side (issue #458) | the sleeve rule places every sleeve chain, and each arm joint's note says why: for a wrist on no part, `… lies on the art of no handwear part within 15 px, so it does not say which sleeve it ends; the nearest is <part>, <d> px from its art by the larger of the x and y gaps (--wrist-snap <d> would bind it)` — `(beyond --wrist-snap <px>)` when the flag was given and fell short, and `the nearest are <a> and <b>, each <d> px …, so no tolerance says which` when two parts tie |
 | `eye_<s>`, `head`, the face box | not moved: they are measured off the parts | the note prints the eye joint's distance from the eye bone, with no bar |
 | `leg_<s>` (issue #241), `foot_<s>` | on a `legwear` part over 500 px: `<s>_hip` → `<s>_knee` (two links), tip at `<s>_ankle`, parent `hip` — when every such part holds the ankle of a leg whose three joints are given, within 15 px of its art; a part holding both ankles gets a chain per leg. The leg is a limb (issue #349), `leg_<s>`: the part is cut at the knee into `thigh_<s>` on link 0 and `shin_<s>` on link 1, each a region — no mesh, no `hip` stub (until #349 the thigh was meshed with one, which pinned it to the hip as the chest stub pinned a sleeve); two legs on one part are split between the two limbs by the cut. When every leg's ankle lies within 15 px of the art of exactly one `footwear` part over 500 px, each leg gets `foot_<s>`, a single bone at the ankle under `leg_<s>1` with `inherit` `"noRotationOrReflection"`, and the footwear part is cut between the feet as `foot_<s>`, the limb's third segment; otherwise no foot is drafted and the note gives each ankle's distance to the nearest footwear art. No idle track: the chain is drafted whatever the pose, and whether the legs move is the scene's. A note per limb says what was cut and why | no leg with all three joints: no chain, and the part is the trunk rule's region with the note it always had, byte for byte. A complete leg whose ankle lies on no legwear part, or on two: no chain, and a note `<parts>: no leg chain — <why>; the trunk rule places it` |
 | the trunk parts' segments (issue #243) | on the `neck` (head run), `topwear` and `bottomwear` meshes, each `[bone, from, to]` segment the rule drafts down the screen is laid along neck → hip, the line the chest is placed on — `neck` + 18 px along it to `chest`; a topwear part's `chest` segment from its art's nearest reach toward the neck end to 20 px short of `hip`, and its `hip` segment from there to 100 px past `hip`; a bottomwear part's `chest` segment, when it has one (issue #262: only when its art reaches above `chest`), from 30 px short of `chest` to 20 px short of `hip` — and the bottomwear waist segment runs across that line, 5 px past `hip`, over 0.09 to 0.91 of the art's width across it. The `head` segment on the neck mesh and the one-blob sleeve rule's chest segment are not moved. A note, `trunk segments (<parts>): laid along neck -> hip …`, gives the line's angle | neither end a joint: the vertical draft, byte for byte. Neck and hip on one point: no line, the vertical draft, and a note says so. An upright line over boxes tight on their art writes the vertical draft's bytes |
@@ -334,6 +335,19 @@ A wrist already on a part is not moved by the flag, and without the flag nothing
 changes, byte for byte. Choosing the tolerance automatically is not done: the note
 for an unbound wrist prints the distance that would have bound it.
 
+**A hanging arm's wrist off its arm layer (`PROPOSE_WRIST_OFF_LAYER`, issue #491)** —
+when an arm hangs (`elbow.y > shoulder.y` and `wrist.y > elbow.y`) on its side's
+handwear part (`handwear-<s>`, or that side's sleeve of a two-part handwear pair
+whose shoulder and elbow both lie within 15 px of the part and whose art reaches at
+least 18 px below the elbow) and the keypoint detector's `<s>_wrist` lands off the
+arm layer (for example on a warm-toned skirt or dress below the hand), the elbow
+cut comes from the limb chain (`<s>_shoulder` → `<s>_elbow` → the bottom extent of
+the arm layer), not from the off-layer wrist read, and a `PROPOSE_WRIST_OFF_LAYER`
+note names the arm layer, the layer the wrist landed on, the chain tip, and the
+chain-derived elbow cut:
+
+    PROPOSE_WRIST_OFF_LAYER: r_wrist at [x, y] lies outside <part> (<from>)'s mask (<d> px from its art by the larger of the x and y gaps, on <other>); chain sleeve_r places its tip at <part>'s bottom extent [tx, ty] instead of r_wrist, and limb arm_r places the elbow cut at [ex, ey] ([ex.x, ey.y]) from the limb chain (r_shoulder [sx, sy] -> r_elbow [ex, ey] -> [tx, ty])
+
 **One handwear part holding both wrists** — two sleeves and the hands decomposed as
 one piece, not clasped at the midline — gets both arms' limbs on its one part, and a note says so:
 
@@ -2161,7 +2175,7 @@ move off it (`AS245`).
 | `propose` | `note:` lines, `LINT` lines, the `coverage` lines, `landmarks.png`, `basis.json` | no LINT line: every chain link lies on its mesh's art, and the hip is below the chest and the figure's top quarter; the `coverage:` summary says how many bones that verdict covers — a `not checked` bone was read by no check (its line says why), and a `ratio` or `fallback` bone in `basis.json` is a guess | a link off the art (a bone on the background) — move it onto the layer; `LINT <link> at … runs to … N degrees off the head's down axis …` — a fringe link that does not lean with the head (§3, the fringe in the head's frame): move it along the lock it drives; `LINT hairback_… on mesh '<part>' (side <r\|l>): <N> tree(s) for <M> visible hair mass(es) (mass 0 columns x=<minX>..<maxX>, y=<minY>..<maxY>; …)` — back-hair cloth trees whose count does not match the side's visible hair masses (`max(1, floor(w / (4 * grid)) + 1)` per mass) or whose link or tip leaves its mass's column range (issues #445, #461): omit `chains` on `cloth."back hair"` or draft trees per visible hair mass inside its columns; `LINT <a_limb> and <b_limb> on <part> (<from>) cross at [x, y] with no per-limb split: …` — two limbs sharing one layer cross in an X without a per-limb split (issue #446): declare `config.limbs.<covering>.split` (`{ "line": [[x, y], …] }` or `{ "edge": "painting" }`, §3 *Which limb*); `LINT stop on <chain> (<firstLink> at [x0, y0]) against <against> (at [ax, ay]) places <chain>_touch at [tx, ty], above <firstLink>'s root (rest R deg, \|rest\| + outward B deg): …` — a stop's contact point `<chain>_touch` lies above `links[0]`'s root in rig px or pushes `\|rest\| + outward` past `180°` (issue #447, §2 `stops`): stop against the descending limb bone below `firstLink`, set `links` to start at a link below `<chain>_touch`, or omit the stop on a rising limb; `LINT hip at [x, y] is not below chest at [x, y]: …` or `LINT hip at [x, y] is above 0.25 of the figure height (figure y T..B, so hip y must be at least L): a hip at the shoulders` — move `hip` down to the waist (and `chest` between it and the neck); a `hanging strand … -- no chain proposed` note — that strand hangs stiff until you add a chain down the x and rows it names (§3); a `no blink: …` or `blink without brows: …` note — the idle will not blink (or its brows will not drop), because no part came from an `eyewhite` (or `eyebrow`) layer; the note names the tags looked for; a `no eyewhite part for eye_<s> …` note — the iris and lash parts it names ride `head` and do not blink, because no `eyewhite-<s>` part made that side's eye bone: take the eyewhite from the other run, or keep them on `head`; a `no face part: face box derived from …` note (always the first) — `head`, `neck` and every face-height scale come from a box guessed off the hair and neck (§3): check `head` and `neck` on `landmarks_head.png` and move them; when it adds `the blink shuts the eyes over no face part`, read `BLINK_NO_HOLE` after `check` — an eye with no face under it can open a hole (the `reference-sample` with only its face removed: 587 px). Under `--keypoints`: the `lint rule set:` line first (joints, or screen and why), then the joint notes — `missing: the rule "…" placed bone X instead` is a bone still guessed; `not used — …` names why an arm's joints did not place its sleeve (for a wrist on no part, the nearest part and the `--wrist-snap` that would bind it); a `wrist snap: …` note is a wrist bound past 15 px by the flag — check that chain's tip on `landmarks.png`; a `one handwear part holds both wrists` note is two chains on one mesh — cut the part with `assemble.cuts` to separate them; `LINT chest at … is not between the neck joint …`, `LINT hip at … is not past chest …`, `LINT hip at … is nearer the neck joint …` and `LINT <chain><i> at … does not advance from <s>_shoulder toward <s>_wrist` are the joint-frame lines: move that bone between, past or along the joints they name |
 | `compare` | one line per pair (origin, parent, tip, length, direction — or SKIP and why), then the per-row summary, the unmapped bones of each side, `required:`, each side's roles and the `controls:` line | proposal against the config you corrected: the rows you changed and no others. Config against the `rig.json` `build` writes for it: measured on both examples, every origin within 6.19e-7 px (the rig's offsets are written to 6 places) and every chain link's tip and length within 4.99e-4 px (`length` is written to 3), printed to three places as `0.000` (a signed figure as `+0.000` or `-0.000`); `parent … is the right's ancestor at depth 2, <bone>_ctl between` for every keyed mesh bone, no `DIFFERENT` and no `NOT MAPPED` | `parent DIFFERENT: left a, right b` — a bone hangs from another parent than the other side's; `frames not related` — a rig with no stage (`skeleton.width`/`height`), two configs at different `rig_scale`: the distance rows SKIP, so declare the frame in a `--map` file if the author knows it; `FAIL  STRUCTURE_REQUIRED_PRESENT` — a bone the map requires is missing through its pairs |
 | `rig` (inside `build`) | one line per mesh: vertices, triangles, bones, influences, `cover`; the `bones` line; the `idle keys` line; then rigc's gate lines (with A15's declared SKIP under `--idle-keys direct`); in `rig.json`, each chain link's (or its `_ctl`'s) `length` and `rotation` | `cover 1.00000` on every mesh, both gate summaries `0 failed` (the compile and the packed pages); every link's `length` the distance to the next link and `rotation` its direction (Spine degrees, counter-clockwise, y up, local to the parent), every offset under it — a child bone's `x, y`, a weight's bind `x, y`, a region's `x, y` — in that turned frame, and a region on a link carrying `rotation` that turns it back upright. Nothing moved: `flattenRig` (`src/rig.ts`) turns every offset back and gives the unturned numbers | `RIG_LATTICE_ONE_LOOP`: change that mesh's `grid` |
-| `check` (inside `build`) | the gate lines verbatim, the pack line, `loop:` (and `loop physics:` when the rig declares a physics constraint, §7), `seam:`, the six judgement lines, then — when `motion.json` holds an animation, the idle included — `ANIMATIONS_DO_NOT_FOLD` and one `folds` line per folding mesh, rigc's own (issues #320, #333), then — where a `footwear` part rides a bone that hangs from another — `FEET_STAY_LEVEL` and one `foot` line per such part (issue #348), then — when `parts.json` names a `handwear` part and there is an idle — `STRESS_OFF_CHAIN` (issue #347), then — where `parts.json` holds a limb segment's part — `LIMB_ONE_BONE` and one `limb` line per such part (issue #349), then — where a limb record carries a `range` — `SEAM_OVER_RANGE` and one `joint` line per joint and angle (issue #360), `RECOMPOSITE_HOLES` and, under `--source`, `SETUP_POSE_VS_SOURCE` (§7), `check.json`; the last line says how many of the bars measured — nine, ten with the fold bar, one more each with the feet-level bar, the stress bar, the limb bar and the range bar — and names the ones that said SKIP | `check: PASS; 11 of 11 bar(s) measured, 0 skipped` on `demo` and `scarf`, whose sleeves each ride one chain; `check: PASS; 10 of 11 bar(s) measured, 1 skipped (STRESS_OFF_CHAIN)` on `reference-demo` and `reference-sample`, whose one `sleeves` mesh rides both sleeve chains (issue #347) — no example writes `FEET_STAY_LEVEL`, every shoe riding `root`; a judgement line SKIP only where the character lacks what it reads; on a rig spec with no `parts.json` or no `idle` (a merged rig, §7 *Measuring a rig rig-parts did not assemble*), PASS with the skipped bars named | `CHECK_SEAM_WITHIN_BAR` or `CHECK_LOOP_CLOSES` (§6); `CHECK_ANIMATIONS_DO_NOT_FOLD` — a clip turns a mesh over (§6); `CHECK_STRESS_OFF_CHAIN` — a sleeve weighted off its chain (§6); `CHECK_LIMB_ONE_BONE` — a limb part on a second bone (§6); `CHECK_SEAM_OVER_RANGE` — a joint that opens when bent (§6) |
+| `check` (inside `build`) | the gate lines verbatim, the pack line, `loop:` (and `loop physics:` when the rig declares a physics constraint, §7), `seam:`, the six judgement lines, then — when `motion.json` holds an animation, the idle included — `ANIMATIONS_DO_NOT_FOLD` and one `folds` line per folding mesh, rigc's own (issues #320, #333), then — where a `footwear` part rides a bone that hangs from another — `FEET_STAY_LEVEL` and one `foot` line per such part (issue #348), then — when `parts.json` names a `handwear` part and there is an idle — `STRESS_OFF_CHAIN` (issue #347), then — where `parts.json` holds a limb segment's part — `LIMB_ONE_BONE` and one `limb` line per such part (issue #349), then — where a limb record carries a `range` — `SEAM_OVER_RANGE` and one `joint` line per joint and angle (issue #360), then `SEAM_OVER_MOTION` — a SKIP naming why on a rig that declares no neighbour pair, else the pairs read in every animation and one `WARN seam` line per pair and animation over the one-cell floor (issue #493, a warning and never a bar), `RECOMPOSITE_HOLES` and, under `--source`, `SETUP_POSE_VS_SOURCE` (§7), `check.json`; the last line says how many of the bars measured — nine, ten with the fold bar, one more each with the feet-level bar, the stress bar, the limb bar and the range bar — and names the ones that said SKIP, then — where `SEAM_OVER_MOTION` read a pair — how many warnings it printed, `; N warning(s) (SEAM_OVER_MOTION, not a bar)`, which no bar counts | `check: PASS; 11 of 11 bar(s) measured, 0 skipped` on `demo` and `scarf`, whose sleeves each ride one chain; `check: PASS; 10 of 11 bar(s) measured, 1 skipped (STRESS_OFF_CHAIN)` on `reference-demo` and `reference-sample`, whose one `sleeves` mesh rides both sleeve chains (issue #347) — no example writes `FEET_STAY_LEVEL`, every shoe riding `root`; a judgement line SKIP only where the character lacks what it reads; on a rig spec with no `parts.json` or no `idle` (a merged rig, §7 *Measuring a rig rig-parts did not assemble*), PASS with the skipped bars named | `CHECK_SEAM_WITHIN_BAR` or `CHECK_LOOP_CLOSES` (§6); `CHECK_ANIMATIONS_DO_NOT_FOLD` — a clip turns a mesh over (§6); `CHECK_STRESS_OFF_CHAIN` — a sleeve weighted off its chain (§6); `CHECK_LIMB_ONE_BONE` — a limb part on a second bone (§6); `CHECK_SEAM_OVER_RANGE` — a joint that opens when bent (§6) |
 | `check --requirements` (and `build --requirements`) | after the lines above, one line per declared requirement, `NAME: PASS`, `FAIL` or `NOT MEASURABLE — …` with its figures, the bar as declared and the worst frame; then `requirements: N declared — M measured (P PASS, F FAIL), K NOT MEASURABLE; not declared: <kinds>`; `check.json`'s `requirements` block; the renders under `requirements/` (§7, *Declared requirements*) | every line PASS and `0 NOT MEASURABLE`; a follow's `released_copy` says whether rigc's consumer-driven door was taken on the throwaway copy; a `stretch` line's `held_by` (issue #321), right after `worst`, names the bones the worst edge's two vertices hang on and their idle chains, in `CHECK_TEXTURE_STRETCH`'s words (§6) and by the same function, on a PASS as on a FAIL | `CHECK_REQUIREMENT_MET` (a figure past its bar; the line names the frame) or `CHECK_REQUIREMENT_MEASURABLE` (the quantity is undefined in the frames: a tip or an axis on a bone of length 0, an aim with no line, a follow no frame of which reaches its least drive); the last line then reads `check: FAIL — B bar(s) not met, R declared requirement(s) not PASS` |
 | `compose` | the `[compose]` lines: one per character (its offset, its scale, its placed bounds, the shift and how many first-level bones, regions on `root` and weights bound to `root` it moved, its bone, slot, track and constraint counts, its `rig_scale` and idle), the declared order and the slot count it expands to, rigc's gate lines; then the `[check]` lines as for `check`, and `scene.json` | both gate summaries `0 failed`, `check: PASS` with the bars that measured and the ones that said SKIP named — on a composed rig `4 of 9`: the gate, the loop, `CHAIN_LAG` and `TEXTURE_STRETCH` (there is no `parts.json`; each character's own `build` measured all nine). `scene.json`'s `order.slots` is the order the compiled skeleton draws | a `SCENE_*` refusal (§6, *compose*) — the scene file, a build, or the order; `COMPOSE_RIGC_GREEN` — rigc's own line, quoted |
 | `loop` (inside `build --loop`, or `loop --frames … --out …`) | the dropped-duplicate line, or, when the end frame is not frame 0, the jump line: its max \|d\| and px over 40, then why — under `build`, `the rig holds N physics constraint(s), and rigc's render starts every one at rest at frame 0` with the remedy `build --loop --lead-in <n>`, or `the rig holds no physics constraint, so the idle itself does not close` (`CHECK_LOOP_CLOSES`); under `loop --frames`, which reads frames alone, both causes (issue #325); under `build --lead-in`, the lead-in line in its place (the frames kept and the jump at the wrap); each file's line, then `loop: idle.png N B (lossless); idle-indexed.png N B (max …, mean …); idle.gif N B (max …, mean …)` | `f0048.png equals f0000.png byte for byte, so it is dropped` | `LOOP_ENCODE` (§6) |
@@ -2735,6 +2749,8 @@ says why each requirement exists and what breaks without it.
 | <a id="ASSEMBLE_SINGLE_RUN_PLAN"></a>`ASSEMBLE_SINGLE_RUN_PLAN` | with no `--head`, a plan row takes `"head"`, or an `extend_below_crop` entry continues a part below a crop there is not | `"full"` in the row; remove the entry |
 | <a id="ASSEMBLE_SINGLE_RUN_HEAD_BOX"></a>`ASSEMBLE_SINGLE_RUN_HEAD_BOX` | with no `--head`, the config sets `seethrough.head_box`, which places a head run there is not | remove `head_box`, or give the head run with `--head` |
 | <a id="ASSEMBLE_ARM_SPLIT_CUTS_ARM"></a>`ASSEMBLE_ARM_SPLIT_CUTS_ARM` | `seethrough.arm_split` cuts a horizontal opaque run of the arm layer into more than two segments (issue #439; the detail gives the row, the run and the split x) | `seethrough.arm_split`: move `x` or `line` so each horizontal opaque run of the arm layer is split at most once |
+| <a id="SEETHROUGH_ARM_RUN_MERGED"></a>`SEETHROUGH_ARM_RUN_MERGED` | a full-run `handwear-r` or `handwear-l` layer merges sleeve, bare hand (`>= 40` skin run px around `<s>_wrist`, `GHOST_MIN_AREA`) and overgarment into one arm layer with non-skin pixels reaching more than `1.0x` the forearm length (`<s>_elbow -> <s>_wrist`) below `<s>_wrist` (measured `-0.15x..0.45x` on the 6 clean standees vs `1.25x..2.02x` on the 3 merged standees), and the sleeve above `<s>_wrist` and the drape below `<s>_wrist` have Euclidean RGB distance `< 80` (`ARM_DRAPE_COLOR_DISTANCE`, measured `20.8..28.2` when same-coloured vs `103.6..236.0` when distinct) so the stage cannot split them by colour (issue #490; the detail gives the hand px, the non-skin span, the forearm length and both RGB medians) | re-seed `config.seethrough.seed`, split the merged layer into `author:` layers in the full run, or cut the overgarment from the sleeve in `config.assemble.cuts` |
+| <a id="SEETHROUGH_HEAD_RUN_HOLLOW"></a>`SEETHROUGH_HEAD_RUN_HOLLOW` | `full:face` has at least `200` opaque run px (`PROPOSE_MIN_PX`) and `head:face` covers less than `75 %` (`HEAD_FACE_COVERAGE_FLOOR`, measured `0.0 %..48.6 %` on hollow/omitted head runs vs `84.8 %..99.6 %` on clean head runs across the 4 public examples and 9-standee corpus) of `fullLayerToHead(full:face)`'s hole-filled silhouette (`alpha > 8`) in the head canvas while `config.assemble.head_face_underfill: true` is not declared, or `head:face` has fewer than `200` opaque pixels so there is no head-run `face` layer to under-fill (issue #492; the detail gives the full-run mapped count, the head-run overlap and upper/lower half shares) | re-seed `config.seethrough.seed`, or set `config.assemble.head_face_underfill: true` when `head:face` exists so the stage composites `fullLayerToHead(full:face)` under `head:face` on the head canvas (the fill restores transparent pixels only and leaves the cut's own edge where it is — a hollow whose edge is not under hair stays visible, and that is the author's to fix at the cut) |
 | <a id="ASSEMBLE_PLAN_TAG_IN_RUN"></a><a id="ASSEMBLE_EXTEND_TAG_IN_RUN"></a>`ASSEMBLE_PLAN_TAG_IN_RUN`, `ASSEMBLE_EXTEND_TAG_IN_RUN` | an entry takes a tag its run does not hold (the detail lists what it does hold) | that entry's run or tag |
 | <a id="ASSEMBLE_PART_OPAQUE"></a>`ASSEMBLE_PART_OPAQUE` | a part ended with no opaque pixel | drop the entry, or take the tag from the other run |
 | <a id="ASSEMBLE_PATCH_BOX_INSIDE"></a>`ASSEMBLE_PATCH_BOX_INSIDE` | a patch's box reaches past the rig (the painting times `rig_scale`; the detail gives the size) | that patch's `box` — it is in rig pixels, not painting pixels |
@@ -2877,6 +2893,7 @@ documents do not ship). Each is an input this package built; none is an author's
 | <a id="CHECK_STRESS_OFF_CHAIN"></a>`CHECK_STRESS_OFF_CHAIN` | a mesh from a See-through `handwear` layer that rides one chain of the idle does not turn rigidly with it: with the chain's first link turned 90°, −90° or 180° on a throwaway copy (physics left out, posed by rigc, issue #347), its worst edge reads above 1.0000 as max(ratio, 1/ratio) against the setup pose. The object names the mesh, the link and the turn; the detail quotes the edge and names each bone the mesh is weighted to off the chain, with how many vertices carry it and the largest weight. Or the turned render shows no mesh on the slot: not read is not a pass | the mesh's `segments`: drop the segment on the bone the line names (a 16 px `chest` stub at the shoulder, as `propose` drafted until issue #347), so the sleeve rides its chain alone. Measured (rigc 2.47.1): `demo`'s sleeves read 2.46 to 254.7 with the stub and 1.0000 without it, and the setup-pose seam does not move (mean 0.147, 0 px over 40, both ways) |
 | <a id="CHECK_LIMB_ONE_BONE"></a>`CHECK_LIMB_ONE_BONE` | a part a `config.limbs` segment made is bound in `rig.json` to a bone besides its segment's — a mesh weighted to a second bone, or a slot on another bone — or to none (issue #349); the object names the part, its limb and its bone, the detail every other bone | `regions.<part>` the segment's bone, or a mesh whose `segments` name that bone alone: a bend is a rotation at the joint |
 | <a id="CHECK_SEAM_OVER_RANGE"></a>`CHECK_SEAM_OVER_RANGE` | a limb joint with a declared `range` (issue #360), bent to one of its range's ends or its middle, fails the rest-pose seam's bar against the same pose with the joint's own art drawn under the limb — the bend uncovers the joint; the object names the joint, its limb and segment, the part, the bone and the angle. Under `cap_shape: "disc"` (issue #360, unit B), also any pixel of the disc over 40 at a pose, under the seam's bar or not. Also a joint the line cannot read (its bone has no parent in `rig.json`, no slot shows its limb, or its cap's disc holds no opaque art), and, refused, two renders of the bent copy that rigc did not put on one grid | a cap that covers the turn: the layer's art within the cap's radius on the upper side of the joint line, or a `cap` image painting what the layer lacks (`limb cap:` names the missing pixels); or a narrower `range` |
+| <a id="SEAM_OVER_MOTION"></a>`SEAM_OVER_MOTION` | **a warning, never a refusal** (issue #493; the owner's ruling, 2026-10-18: a seam that opens in motion may be intended). Every declared neighbour pair — each limb's two segments at a joint, the upper and the one below (`parts.json`'s limb records, `config.limbs`), and under `--requirements` each `seam`'s `part` and `neighbour`, one pair however many declare it — read in every animation `motion.json` holds, the idle included, by rig-c's seam reading: one `rigc render --seam <a>:<b>,… --fps 12` over the packed build as played (physics on), whose `seam.json` (`rigc-seam/1`, rig-c's AUTHORING §8.8) names per pair and frame a **gap** (background inside the joint) or a **ghost** (one piece's overlap band swung clear of its partner), each frame's cells (`px`, one texel of the coarser drawing — a rig px on a build at scale 1), its cell size and its world box. Printed per pair and animation with a frame over the floor: `WARN seam "<a>\|<b>" opens on N frame(s) [<frames>] max <px> px in "<animation>" — over the one-cell floor`, then how many more frames rigc named that were under it. **The floor**: a frame's gap or ghost is reported when it holds more cells than its box is long (its longer side, in cells) — thicker than one cell. A cell is drawn when the renderer paints its centre at half opacity, so an outline that moves by less than a cell flips the cells along it: a line one cell deep, joined or scattered, holds at most as many cells as its box is long, and a hole of any area more. The rule types no number; measured on `examples/wind`'s idle, rigc names 43 openings over its six limb pairs (the two elbows, 1 to 5 cells, boxes up to 17 cells long), every one one cell thick, and on rig-c's `gallery/walk` 13 joint cracks of 1 to 3 cells, all one cell thick. `check.json`'s `SEAM_OVER_MOTION` holds `status` (`WARN`, `CLEAR`), `fps`, `floor`, `pairs`, `animations`, `warnings` and one row per pair and animation (`opens` and `px` over the floor, `max_px`, `under_floor`, rigc's `status`, `drawn` and `banded`); it moves no exit status, no `check: PASS` and no bar count — the summary ends `; N warning(s) (SEAM_OVER_MOTION, not a bar)`. **SKIP**, named: no pair declared (no limb segment, no `seam`; then `check.json` has no key), no `parts.json`, no animation, every pair naming a slot `rig.json` lacks (each printed `not read`), or rigc reading no band on any frame of any pair (rigc's own `skip`: the two drawings share no cell at rest) — nothing measured, never a pass | if the opening is not intended: a cap that covers the turn (`config.limbs`, *Limbs: cut at their joints*; `limb cap:` names the pixels the layer lacks), or a motion that bends that joint less; if it is intended, nothing |
 | <a id="CHECK_FOLDS_READ"></a>`CHECK_FOLDS_READ` | the fold render's `frames.json` names no set for an animation, a `folds.json` is missing, not `rigc-folds/1`, another animation's or another rate's, or a folding mesh has no line rigc printed for it | a rigc problem; report it, with `rigc --version` |
 | <a id="CHECK_SEAM_FRAME_SIZE"></a><a id="FRAMES_SIDECAR"></a><a id="CHECK_GEOMETRY_FILE"></a>`CHECK_SEAM_FRAME_SIZE`, `FRAMES_SIDECAR`, `CHECK_GEOMETRY_FILE` | rigc's render is not what its `frames.json` says, or its `geometry.json` is not a whole `rigc-geometry/1` export of the frames beside it (a frame count, a mesh whose vertex count differs from its rest entry; for the face half, another viewport than `frames.json`'s, other frame indices, the head bone or a feature's bone missing from a frame, a non-finite transform or time) | a rigc problem; report it |
 | <a id="LOOP_ENCODE"></a>`LOOP_ENCODE` | the loop encoder refused a frame (translucent pixel in a GIF, a size change) | the frames; for a translucent frame write the lossless or the indexed APNG, which keep alpha |
@@ -3393,6 +3410,7 @@ it reads is there, and says SKIP with the reason when it is not:
 | `ANIMATIONS_DO_NOT_FOLD` | every animation, the idle included, through `rigc render --folds` | never SKIP: written when `motion.json` holds an animation, the idle alone included (issue #333), absent when it holds none (with or without a `parts.json`) |
 | `STRESS_OFF_CHAIN` | `parts.json`'s tags, the idle's chains, `rig.json`'s weights, and a turned copy rigc poses | written only when `parts.json` names a `handwear` part and there is an idle (absent on a rig with no `parts.json`); SKIP when no such part rides exactly one chain, each part's reason |
 | `SEAM_OVER_RANGE` | `parts.json`'s limb records with a `range`, and a bent copy rigc renders | written only when a limb record carries a `range` (absent on a rig with no `parts.json`); never SKIP — a joint it cannot read is a FAIL naming why |
+| `SEAM_OVER_MOTION` | `parts.json`'s limb records and `--requirements` seams, and every animation through `rigc render --seam` | a warning, not a bar: SKIP, printed and named, with no `parts.json` (absent from `check.json`), no pair declared, or no animation |
 | `RECOMPOSITE_HOLES` | `parts.json`'s `recomposite` block | no `parts.json`, or no block |
 | `SETUP_POSE_VS_SOURCE` | the rig spec and the painting | no `--source` |
 

package/docs/MIGRATION.md

@@ -322,3 +322,22 @@ their `parts.json` and `check.json` to `expected/`).
 
 What to do: nothing. To have a joint read, declare its `range`; a joint that opens when
 bent wants a cap that covers the turn.
+
+## After 1.37.0: the seam in motion
+
+Issue #493 reads every declared neighbour pair — each limb's two segments at a joint
+(`config.limbs`), and each `--requirements` `seam`'s two parts — in every animation
+`motion.json` holds, the idle included, by rig-c's seam reading (`rigc render --seam`,
+rig-c 2.60.0, now the dependency's floor). It is a warning, never a bar: a seam that
+opens in motion may be intended, so no exit status, no `check: PASS` and no bar count
+moves (AUTHORING §6, `SEAM_OVER_MOTION`).
+
+| change | before | after |
+| --- | --- | --- |
+| the `rig-c` dependency | `^2.59.0` | `^2.60.0`, the first with `render --seam` |
+| `check` on a rig whose `parts.json` holds a limb segment, or under a `--requirements` with a `seam` | not read | `SEAM_OVER_MOTION` in `check.json` after `SEAM_OVER_RANGE`, its console lines after the range lines, one `WARN seam` line per pair and animation over the one-cell floor, and `; N warning(s) (SEAM_OVER_MOTION, not a bar)` at the end of the summary |
+| `check` on any other rig | — | one console line, `SEAM_OVER_MOTION: SKIP — …`, naming why; no key in `check.json`, nothing more rendered |
+
+What to do: nothing. A warning names the pair, the animation, the frames and the cells;
+an opening that is not intended wants a cap that covers the turn, or a motion that bends
+less.

package/docs/STABILITY.md

@@ -120,7 +120,7 @@ part name, `[i]` an entry of a list):
 - **generation.control.skeleton**, the pose file it names when it is no built-in — required: `width`, `height`, `points`
 - **seethrough** — required: `resolution`, `steps`, `seed`, `offload`; optional: `head_box`, `arm_split`
 - **seethrough.arm_split** — required: `order`, and one of `x` or `line` (issue #439)
-- **assemble** — required: `rig_scale`, `plan` (from plain `assemble` on); optional: `extend_below_crop`, `patches`, `cuts`, `alternates`
+- **assemble** — required: `rig_scale`, `plan` (from plain `assemble` on); optional: `extend_below_crop`, `patches`, `cuts`, `alternates`, `head_face_underfill`
 - **assemble.alternates[i]** — required: `name`; optional: `source`, `full`, `head`, `parts`, `hides`, `head_box`, `cuts`, `skeleton`, `drawn` (issues #454, #465)
 - **assemble.extend_below_crop[i]** — required: `part`, `run`, `tag`
 - **assemble.patches[i]** — required: `name`, `box`, `alpha`, `draw`
@@ -190,7 +190,7 @@ every number) are AUTHORING §3's tables, and the loader refuses any other by na
 | `parts.json`, `parts/<name>.png` | `assemble`, `build` | one record per part: `from` (`<run>:<tag>` with a See-through v3 tag, `<run>:author:<label>` for a layer the author made — issue #256, read by no role rule — or `painting:<name>` for a patch), `cut_from` on a cut's piece only (the plan part it was cut from, issue #230), `limb` on a limb segment's part only (issue #349: `name`, `segment`, `of`, `bone`, and below a joint `joint`, `range` when the config segment declares one (issue #360), and `cap` — `at`, `width`, `radius`, `box`, `layer_px`, `image_px` with a cap image, `image_layer` after it when that image was a hidden-art layer — issue #359, `<run>:<layer>:hidden` — `missing_px`, then `shape` and `upper_px` under the segment's `cap_shape`, and `edge`, `feather_radius` and `feathered_px` under its `edge`, and `cut_band`, `cut_offset`, `cut_at`, `cut_crossed`, `joint_crossed`, `band_px` and `stroke_luma_max` (when the band has a split) under its `cut_band`, issue #360), the box `x`, `y`, `w`, `h` (rig px), the pixel counts `src/parts.ts` documents (`opaque_px`, `visible_px`, `occluded_px`, `projected_core_px`, `source_px_taken`, `visible_not_projected_px`, `refused_drift_px`, `merged_px`, `seam_override_px`, and `fringe_pushed_back` when not empty); `rig_size`, `scale_rig_per_source`, `ghost_px`, `recomposite`, and `scene` (`figure_alpha_above`, `figure_px`, `figure_mask`) under `config.scene` only, with the figure's mask `figure_rig.png` beside the recomposite (issue #242); `single_run_pad` (`file_size`, `side`, `left`, `top`) last, only for one run whose file is not the `seethrough.resolution` square (issue #366) |
 | `rig/rig.json`, `rig/motion.json`, `rig/images/` | `rig`, `build`, `compose` | rig-c's rig spec and motion spec, `spec` `rigc-rig/1` and `rigc-motion/1`: the format is rig-c's, and this package writes only what rig-c's parser accepts; a bone carries `inherit` only where config.bones declares one, rig-c's mode name as written (issue #348) |
 | `rig/mesh_report.json` | `rig`, `build` | one row per mesh: `part`, `vertices`, `triangles`, `hull`, `bones`, `max_influences`, `mean_influences`, `art_coverage`, then `grid` (a lattice); `mode` "contour" with `params`, `contour`, `regions` (`params.maxEdge` and `contour.outlineCut` only when the mesh declares `contour.maxEdge`; `params.bridges` and `contour.bridges` — `islands`, `units`, `joins`, and `faint` only when an island was left out as faint — only when it declares `contour.bridges`); or `mode` "auto" with `settings`, `source`, `result`, `residuals`, `worst_residual`, `worst_region`, `motion_amplitude`, `termination`, `weights`, `regions`, `deformation`, `quality_report` (rig-c's `mesh-quality-report/1` document whole), `motion_report`, and, only when they apply, `stray_cleared` (after `source`, when `source.stray` is declared), `skinning_residual` and `replay` (`AutoMeshReport` in `src/rig.ts`); in every mode, `exponent` when the mesh declares one (after `grid`, or after `mode`); `influences`, as declared, when a lattice or contour mesh declares it (after `exponent`, or where `exponent` would be); `stray` and `stray_cleared` when a lattice mesh declares `stray` (after `influences`, or where `influences` would be); `ribs` when a contour or auto mesh declares them (after `exponent`, or after `mode`), and then `contour.ribs` (`source.contour.ribs` in the automatic mode) |
-| `check/check.json` and the rest of `check/` | `check`, `build`, `compose` | the reference's fields in its order (`gate_spine_html_green`, `rigc_entry`, `pack_mode`, `loop_max_diff`, the seam figures — `seam_mean`, `seam_px_over_40`, `seam_px_over_80` and, from issue #216, `seam_frame_scale`, the frame scale the bar divides the count by), `loop_physics` after `loop_max_diff` when the rig declares a physics constraint, `seam_border` after the seam figures when `parts.json` declares a scene (issue #242), `seam_pairs` after the seam figures when the seam bar fails or `--seam-pairs` asks (each row's picture under `check/seam/`; `--keep-stills` leaves the setup-pose still and its `frames.json` under `check/setup_still/`), then the judgement lines (`BREATH_VISIBLE`, `BLINK_NO_HOLE`, `CHAIN_LAG`, `TIP_OVER_ROOT`, `STILL_REGIONS_DARK`, `TEXTURE_STRETCH`), `ANIMATIONS_DO_NOT_FOLD` after them when `motion.json` holds an animation, the idle included — on every rig with an idle since issue #333 (issues #320, #363: `status`, `animations`, `fps`, `physics_left_out`, `folding` — each `animation`, `slot`, `attachment`, `frames`, `worst_frame`, `worst_triangles`, `triangles`, `physics_on`, `physics_off`, `physics_constraints`, `declared`, `line` — `folding_undeclared`, `declared_not_folding`, `bar`), `FEET_STAY_LEVEL` after it when a `footwear` part rides a bone that hangs from another and `motion.json` holds an animation (issue #348: `status`, `reason` on a SKIP only, `animations`, `fps`, `physics_left_out`, `bar_degrees`, `bar`, `feet` — each `part`, `bone`, `hangs_from`, `status`, `frames_posed`, `worst`), `LIMB_ONE_BONE` after it (and after `STRESS_OFF_CHAIN` where that is written) when `parts.json` holds a limb segment's part (issue #349: `status`, `parts` — each `part`, `limb`, `bone`, `status`, `others`), `SEAM_OVER_RANGE` after it when a limb record carries a `range` (issue #360: `status`, `frame_scale`, `physics_left_out`, `bar` — `mean`, `rig_px_over_40`, `level` — and `joints`, each `part`, `limb`, `segment`, `joint`, `bone`, `range`, `at`, `radius`, `under_px`, `status`, `poses` — each `degrees`, `status`, `mean`, `px_over_40`, `px_over_80`, `rig_px_over_40` — and `unread` on a joint not read), `RECOMPOSITE_HOLES` (its first figure `declared_scene` when `parts.json` declares a scene), `SETUP_POSE_VS_SOURCE`, `skipped`, a `requirements` block under `--requirements`, and `PASS`; `check/build/skeleton.json`, `.atlas` and `.png` are the packed artifact rig-c writes |
+| `check/check.json` and the rest of `check/` | `check`, `build`, `compose` | the reference's fields in its order (`gate_spine_html_green`, `rigc_entry`, `pack_mode`, `loop_max_diff`, the seam figures — `seam_mean`, `seam_px_over_40`, `seam_px_over_80` and, from issue #216, `seam_frame_scale`, the frame scale the bar divides the count by), `loop_physics` after `loop_max_diff` when the rig declares a physics constraint, `seam_border` after the seam figures when `parts.json` declares a scene (issue #242), `seam_pairs` after the seam figures when the seam bar fails or `--seam-pairs` asks (each row's picture under `check/seam/`; `--keep-stills` leaves the setup-pose still and its `frames.json` under `check/setup_still/`), then the judgement lines (`BREATH_VISIBLE`, `BLINK_NO_HOLE`, `CHAIN_LAG`, `TIP_OVER_ROOT`, `STILL_REGIONS_DARK`, `TEXTURE_STRETCH`), `ANIMATIONS_DO_NOT_FOLD` after them when `motion.json` holds an animation, the idle included — on every rig with an idle since issue #333 (issues #320, #363: `status`, `animations`, `fps`, `physics_left_out`, `folding` — each `animation`, `slot`, `attachment`, `frames`, `worst_frame`, `worst_triangles`, `triangles`, `physics_on`, `physics_off`, `physics_constraints`, `declared`, `line` — `folding_undeclared`, `declared_not_folding`, `bar`), `FEET_STAY_LEVEL` after it when a `footwear` part rides a bone that hangs from another and `motion.json` holds an animation (issue #348: `status`, `reason` on a SKIP only, `animations`, `fps`, `physics_left_out`, `bar_degrees`, `bar`, `feet` — each `part`, `bone`, `hangs_from`, `status`, `frames_posed`, `worst`), `LIMB_ONE_BONE` after it (and after `STRESS_OFF_CHAIN` where that is written) when `parts.json` holds a limb segment's part (issue #349: `status`, `parts` — each `part`, `limb`, `bone`, `status`, `others`), `SEAM_OVER_RANGE` after it when a limb record carries a `range` (issue #360: `status`, `frame_scale`, `physics_left_out`, `bar` — `mean`, `rig_px_over_40`, `level` — and `joints`, each `part`, `limb`, `segment`, `joint`, `bone`, `range`, `at`, `radius`, `under_px`, `status`, `poses` — each `degrees`, `status`, `mean`, `px_over_40`, `px_over_80`, `rig_px_over_40` — and `unread` on a joint not read), `SEAM_OVER_MOTION` after it when `parts.json` holds a limb segment or `--requirements` a `seam` (issue #493, a warning and not a bar: `status` — `WARN`, `CLEAR` or `SKIP` — `reason` on a SKIP only, `fps`, `floor`, `pairs` — each `pair`, `a`, `b`, `declared`, and `unread` on a pair not read — `animations`, `warnings`, `rows` — each `pair`, `animation`, `status`, `drawn`, `banded`, `opens`, `px`, `max_px`, `under_floor`), `RECOMPOSITE_HOLES` (its first figure `declared_scene` when `parts.json` declares a scene), `SETUP_POSE_VS_SOURCE`, `skipped`, a `requirements` block under `--requirements`, and `PASS`; `check/build/skeleton.json`, `.atlas` and `.png` are the packed artifact rig-c writes |
 | `layers.json`, `<index>_<name>.png` | `layers --export` | the wrapper form `layers` reads (issue #359): `width`, `height`, then `layers` — each `name`, `filename`, `left`, `top`, `right`, `bottom`, `depth_median` (the input's own; `null` for a PSD, the manifest's order then being the draw order) — drawn layers in draw order, then the hidden-art layers; a PNG's name is its index and its layer's name, and the manifest, not the file name, says which layer it is |
 | the template `.psd` | `layers --template` | one empty layer per name `templateLayerNames` (`src/layers.ts`) holds, bottom first; the same canvas writes the same bytes |
 | `proposal.json`, `render/landmarks*.png` | `propose` | the config's four rig sections, `constraints` with `--cloth` (issue #364: a physics constraint per tree link named `<bone>_physics`, a dangling end's `<bone>_translate`, and a skirt swing's transforms `<swing>_<tree>`), `turn` with `--full`/`--head`, `proposed_rig_scale` (issue #354), and `notes` |

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@rig-c/parts",
-  "version": "1.36.0",
+  "version": "1.38.0",
   "description": "AI-authored 2D character parts from one anime painting and its See-through layer decomposition: measured parts, weighted-mesh rig specs, verified through rig-c before anything is written. A CLI for agents that cannot see the image.",
   "type": "module",
   "bin": {
@@ -61,7 +61,7 @@
   },
   "dependencies": {
     "ag-psd": "^31.0.2",
-    "rig-c": "^2.59.0"
+    "rig-c": "^2.60.0"
   },
   "devDependencies": {
     "@esotericsoftware/spine-core": "4.3.13",