@retikz/core 0.0.1-rc.3 → 0.1.0-alpha.1

package/dist/es/geometry/diamond.js

@@ -0,0 +1,87 @@
+//#region src/geometry/diamond.ts
+var localToWorld = (d, local) => {
+	const angle = d.rotate ?? 0;
+	if (angle === 0) return [d.x + local[0], d.y + local[1]];
+	const cos = Math.cos(angle);
+	const sin = Math.sin(angle);
+	return [d.x + local[0] * cos - local[1] * sin, d.y + local[0] * sin + local[1] * cos];
+};
+var worldToLocal = (d, world) => {
+	const tx = world[0] - d.x;
+	const ty = world[1] - d.y;
+	const angle = d.rotate ?? 0;
+	if (angle === 0) return [tx, ty];
+	const cos = Math.cos(angle);
+	const sin = Math.sin(angle);
+	return [tx * cos + ty * sin, -tx * sin + ty * cos];
+};
+/** 菱形相关基础工具 */
+var diamond = {
+	/** 中心 */
+	center: (d) => [d.x, d.y],
+	/**
+	* 判断点是否在菱形内（含边界，考虑旋转）。
+	* 菱形方程：|x|/halfA + |y|/halfB ≤ 1。
+	*/
+	contains: (d, p) => {
+		const [lx, ly] = worldToLocal(d, p);
+		return Math.abs(lx) / d.halfA + Math.abs(ly) / d.halfB <= 1.000000001;
+	},
+	/**
+	* 9 个标准 anchor 的世界坐标。
+	* - N/S/E/W：四个顶点
+	* - NE/NW/SE/SW：四条边的中点
+	* - center：几何中心
+	*/
+	anchor: (d, name) => {
+		let lx = 0;
+		let ly = 0;
+		switch (name) {
+			case "center": break;
+			case "north":
+				ly = -d.halfB;
+				break;
+			case "south":
+				ly = d.halfB;
+				break;
+			case "east":
+				lx = d.halfA;
+				break;
+			case "west":
+				lx = -d.halfA;
+				break;
+			case "north-east":
+				lx = d.halfA / 2;
+				ly = -d.halfB / 2;
+				break;
+			case "north-west":
+				lx = -d.halfA / 2;
+				ly = -d.halfB / 2;
+				break;
+			case "south-east":
+				lx = d.halfA / 2;
+				ly = d.halfB / 2;
+				break;
+			case "south-west":
+				lx = -d.halfA / 2;
+				ly = d.halfB / 2;
+				break;
+		}
+		return localToWorld(d, [lx, ly]);
+	},
+	/**
+	* 从中心向 toward 方向画射线，求与菱形 4 条边之一的交点。
+	* 菱形方程：|x|/halfA + |y|/halfB = 1。
+	* 沿方向 (lx, ly) 缩放 t 倍命中：t × (|lx|/halfA + |ly|/halfB) = 1
+	* → t = 1 / (|lx|/halfA + |ly|/halfB)。
+	*/
+	boundaryPoint: (d, toward) => {
+		const [lx, ly] = worldToLocal(d, toward);
+		const denom = Math.abs(lx) / d.halfA + Math.abs(ly) / d.halfB;
+		if (denom === 0) return [d.x, d.y];
+		const t = 1 / denom;
+		return localToWorld(d, [lx * t, ly * t]);
+	}
+};
+//#endregion
+export { diamond };

package/dist/es/geometry/ellipse.d.ts

@@ -0,0 +1,38 @@
+import { Position } from './point';
+/** 椭圆：几何中心 (x, y) + 半长轴 rx / 半短轴 ry + 可选旋转（弧度） */
+export type Ellipse = {
+    /** 中心横坐标 */
+    x: number;
+    /** 中心纵坐标 */
+    y: number;
+    /** 半长轴（沿本地 +x 方向） */
+    rx: number;
+    /** 半短轴（沿本地 +y 方向） */
+    ry: number;
+    /** 绕几何中心旋转弧度；省略或 0 表示不旋转 */
+    rotate?: number;
+};
+/** 椭圆 9 个标准 anchor 名（含义与 RECT_ANCHORS 一致） */
+export type EllipseAnchor = 'center' | 'north' | 'south' | 'east' | 'west' | 'north-east' | 'north-west' | 'south-east' | 'south-west';
+/** 椭圆相关基础工具 */
+export declare const ellipse: {
+    /** 中心 */
+    center: (e: Ellipse) => Position;
+    /** 判断点是否在椭圆内（含边界，考虑旋转） */
+    contains: (e: Ellipse, p: Position) => boolean;
+    /**
+     * 9 个标准 anchor 的世界坐标。
+     * 对角 anchor（NE/NW/SE/SW）取参数曲线 t=π/4 处的点：
+     * (rx·cos(π/4), ry·sin(π/4)) = (rx/√2, ry/√2)。
+     * 这与 TikZ 椭圆对角 anchor 的"参数等分"约定一致。
+     */
+    anchor: (e: Ellipse, name: EllipseAnchor) => Position;
+    /**
+     * 从中心向 toward 方向画射线，求与椭圆的交点。
+     * 椭圆方程：(x/rx)² + (y/ry)² = 1。
+     * 沿方向 (lx, ly) 缩放 t 倍命中：t² × ((lx/rx)² + (ly/ry)²) = 1
+     * → t = 1 / √((lx/rx)² + (ly/ry)²)。
+     */
+    boundaryPoint: (e: Ellipse, toward: Position) => Position;
+};
+//# sourceMappingURL=ellipse.d.ts.map

package/dist/es/geometry/ellipse.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"ellipse.d.ts","sourceRoot":"","sources":["../../../src/geometry/ellipse.ts"],"names":[],"mappings":"AAAA,OAAO,KAAK,EAAE,QAAQ,EAAE,MAAM,SAAS,CAAC;AAExC,kDAAkD;AAClD,MAAM,MAAM,OAAO,GAAG;IACpB,YAAY;IACZ,CAAC,EAAE,MAAM,CAAC;IACV,YAAY;IACZ,CAAC,EAAE,MAAM,CAAC;IACV,qBAAqB;IACrB,EAAE,EAAE,MAAM,CAAC;IACX,qBAAqB;IACrB,EAAE,EAAE,MAAM,CAAC;IACX,4BAA4B;IAC5B,MAAM,CAAC,EAAE,MAAM,CAAC;CACjB,CAAC;AAIF,6CAA6C;AAC7C,MAAM,MAAM,aAAa,GACrB,QAAQ,GACR,OAAO,GACP,OAAO,GACP,MAAM,GACN,MAAM,GACN,YAAY,GACZ,YAAY,GACZ,YAAY,GACZ,YAAY,CAAC;AAoBjB,eAAe;AACf,eAAO,MAAM,OAAO;IAClB,SAAS;gBACG,OAAO,KAAG,QAAQ;IAC9B,0BAA0B;kBACZ,OAAO,KAAK,QAAQ,KAAG,OAAO;IAI5C;;;;;OAKG;gBACS,OAAO,QAAQ,aAAa,KAAG,QAAQ;IAqCnD;;;;;OAKG;uBACgB,OAAO,UAAU,QAAQ,KAAG,QAAQ;CAQxD,CAAC"}

package/dist/es/geometry/ellipse.js

@@ -0,0 +1,86 @@
+//#region src/geometry/ellipse.ts
+var SQRT_HALF = Math.SQRT1_2;
+var localToWorld = (e, local) => {
+	const angle = e.rotate ?? 0;
+	if (angle === 0) return [e.x + local[0], e.y + local[1]];
+	const cos = Math.cos(angle);
+	const sin = Math.sin(angle);
+	return [e.x + local[0] * cos - local[1] * sin, e.y + local[0] * sin + local[1] * cos];
+};
+var worldToLocal = (e, world) => {
+	const tx = world[0] - e.x;
+	const ty = world[1] - e.y;
+	const angle = e.rotate ?? 0;
+	if (angle === 0) return [tx, ty];
+	const cos = Math.cos(angle);
+	const sin = Math.sin(angle);
+	return [tx * cos + ty * sin, -tx * sin + ty * cos];
+};
+/** 椭圆相关基础工具 */
+var ellipse = {
+	/** 中心 */
+	center: (e) => [e.x, e.y],
+	/** 判断点是否在椭圆内（含边界，考虑旋转） */
+	contains: (e, p) => {
+		const [lx, ly] = worldToLocal(e, p);
+		return lx * lx / (e.rx * e.rx) + ly * ly / (e.ry * e.ry) <= 1;
+	},
+	/**
+	* 9 个标准 anchor 的世界坐标。
+	* 对角 anchor（NE/NW/SE/SW）取参数曲线 t=π/4 处的点：
+	* (rx·cos(π/4), ry·sin(π/4)) = (rx/√2, ry/√2)。
+	* 这与 TikZ 椭圆对角 anchor 的"参数等分"约定一致。
+	*/
+	anchor: (e, name) => {
+		let lx = 0;
+		let ly = 0;
+		switch (name) {
+			case "center": break;
+			case "north":
+				ly = -e.ry;
+				break;
+			case "south":
+				ly = e.ry;
+				break;
+			case "east":
+				lx = e.rx;
+				break;
+			case "west":
+				lx = -e.rx;
+				break;
+			case "north-east":
+				lx = e.rx * SQRT_HALF;
+				ly = -e.ry * SQRT_HALF;
+				break;
+			case "north-west":
+				lx = -e.rx * SQRT_HALF;
+				ly = -e.ry * SQRT_HALF;
+				break;
+			case "south-east":
+				lx = e.rx * SQRT_HALF;
+				ly = e.ry * SQRT_HALF;
+				break;
+			case "south-west":
+				lx = -e.rx * SQRT_HALF;
+				ly = e.ry * SQRT_HALF;
+				break;
+		}
+		return localToWorld(e, [lx, ly]);
+	},
+	/**
+	* 从中心向 toward 方向画射线，求与椭圆的交点。
+	* 椭圆方程：(x/rx)² + (y/ry)² = 1。
+	* 沿方向 (lx, ly) 缩放 t 倍命中：t² × ((lx/rx)² + (ly/ry)²) = 1
+	* → t = 1 / √((lx/rx)² + (ly/ry)²)。
+	*/
+	boundaryPoint: (e, toward) => {
+		const [lx, ly] = worldToLocal(e, toward);
+		if (lx === 0 && ly === 0) return [e.x, e.y];
+		const a = lx / e.rx;
+		const b = ly / e.ry;
+		const t = 1 / Math.sqrt(a * a + b * b);
+		return localToWorld(e, [lx * t, ly * t]);
+	}
+};
+//#endregion
+export { ellipse };

package/dist/es/geometry/index.d.ts

@@ -0,0 +1,7 @@
+export * from './point';
+export * from './rect';
+export * from './circle';
+export * from './ellipse';
+export * from './diamond';
+export * from './polar';
+//# sourceMappingURL=index.d.ts.map

package/dist/es/geometry/index.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"index.d.ts","sourceRoot":"","sources":["../../../src/geometry/index.ts"],"names":[],"mappings":"AAAA,cAAc,SAAS,CAAC;AACxB,cAAc,QAAQ,CAAC;AACvB,cAAc,UAAU,CAAC;AACzB,cAAc,WAAW,CAAC;AAC1B,cAAc,WAAW,CAAC;AAC1B,cAAc,SAAS,CAAC"}

package/dist/es/geometry/point.d.ts

@@ -0,0 +1,25 @@
+import { PolarPosition } from './polar';
+/** 笛卡尔坐标点 [x, y] */
+export type Position = [number, number];
+/** 二维向量 / 坐标的基础运算工具集 */
+export declare const point: {
+    /** 两点相加（向量加法）：a + b */
+    add: (a: Position, b: Position) => Position;
+    /** 两点相减（向量减法）：a - b */
+    sub: (a: Position, b: Position) => Position;
+    /** 等比缩放：a * k */
+    scale: (a: Position, k: number) => Position;
+    /** 判断两点坐标是否完全相等（精确比较，不带容差） */
+    equal: (a: Position, b: Position) => boolean;
+    /** 笛卡尔点 → 极坐标（angle 落在 (-180, 180]，origin 取默认 [0, 0]） */
+    toPolar: (p: Position) => PolarPosition;
+    /**
+     * 判断两个点是否相同（跨坐标系）。每个参数可以是笛卡尔 [x, y] 或 PolarPosition；
+     * 极坐标先转为笛卡尔，再按 precision 指定的小数位数四舍五入比较。
+     * `polar.equal` 委托到本方法。
+     * @param precision 小数点后位数；默认 2
+     * @throws 当 PolarPosition 的 origin 是节点 id 字符串时——字符串解析需 Scene 上下文
+     */
+    equalPolar: (a: Position | PolarPosition, b: Position | PolarPosition, precision?: number) => boolean;
+};
+//# sourceMappingURL=point.d.ts.map

package/dist/es/geometry/point.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"point.d.ts","sourceRoot":"","sources":["../../../src/geometry/point.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,KAAK,aAAa,EAAS,MAAM,SAAS,CAAC;AAEpD,oBAAoB;AACpB,MAAM,MAAM,QAAQ,GAAG,CAAC,MAAM,EAAE,MAAM,CAAC,CAAC;AAIxC,wBAAwB;AACxB,eAAO,MAAM,KAAK;IAChB,uBAAuB;aACd,QAAQ,KAAK,QAAQ,KAAG,QAAQ;IACzC,uBAAuB;aACd,QAAQ,KAAK,QAAQ,KAAG,QAAQ;IACzC,iBAAiB;eACN,QAAQ,KAAK,MAAM,KAAG,QAAQ;IACzC,8BAA8B;eACnB,QAAQ,KAAK,QAAQ,KAAG,OAAO;IAC1C,yDAAyD;iBAC5C,QAAQ,KAAG,aAAa;IAIrC;;;;;;OAMG;oBAEE,QAAQ,GAAG,aAAa,KACxB,QAAQ,GAAG,aAAa,yBAE1B,OAAO;CASX,CAAC"}

package/dist/es/geometry/point.js

@@ -0,0 +1,34 @@
+import { polar } from "./polar.js";
+//#region src/geometry/point.ts
+var RAD_TO_DEG = 180 / Math.PI;
+/** 二维向量 / 坐标的基础运算工具集 */
+var point = {
+	/** 两点相加（向量加法）：a + b */
+	add: (a, b) => [a[0] + b[0], a[1] + b[1]],
+	/** 两点相减（向量减法）：a - b */
+	sub: (a, b) => [a[0] - b[0], a[1] - b[1]],
+	/** 等比缩放：a * k */
+	scale: (a, k) => [a[0] * k, a[1] * k],
+	/** 判断两点坐标是否完全相等（精确比较，不带容差） */
+	equal: (a, b) => a[0] === b[0] && a[1] === b[1],
+	/** 笛卡尔点 → 极坐标（angle 落在 (-180, 180]，origin 取默认 [0, 0]） */
+	toPolar: (p) => ({
+		angle: Math.atan2(p[1], p[0]) * RAD_TO_DEG,
+		radius: Math.hypot(p[0], p[1])
+	}),
+	/**
+	* 判断两个点是否相同（跨坐标系）。每个参数可以是笛卡尔 [x, y] 或 PolarPosition；
+	* 极坐标先转为笛卡尔，再按 precision 指定的小数位数四舍五入比较。
+	* `polar.equal` 委托到本方法。
+	* @param precision 小数点后位数；默认 2
+	* @throws 当 PolarPosition 的 origin 是节点 id 字符串时——字符串解析需 Scene 上下文
+	*/
+	equalPolar: (a, b, precision = 2) => {
+		const aCart = Array.isArray(a) ? a : polar.toPosition(a);
+		const bCart = Array.isArray(b) ? b : polar.toPosition(b);
+		const factor = 10 ** precision;
+		return Math.round(aCart[0] * factor) === Math.round(bCart[0] * factor) && Math.round(aCart[1] * factor) === Math.round(bCart[1] * factor);
+	}
+};
+//#endregion
+export { point };

package/dist/es/geometry/polar.d.ts

@@ -0,0 +1,44 @@
+import { Position } from './point';
+/**
+ * 极坐标点：相对 origin 的角度 + 半径偏移。
+ * - 可进 IR；Scene 编译时统一解析为笛卡尔
+ * - 不直接参与几何计算，参与时先转为 Position（见本文件顶部说明）
+ * - origin 可嵌套（PolarPosition），可引用节点 id（string），可直接给坐标（Position），省略表示原点 [0, 0]
+ */
+export type PolarPosition = {
+    /** 极坐标原点：节点 id / 笛卡尔位置 / 嵌套极坐标；省略表示 [0, 0] */
+    origin?: string | Position | PolarPosition;
+    /** 角度（度数，逆时针为正，与 TikZ / 数学习惯一致） */
+    angle: number;
+    /** 半径（user units，应为非负） */
+    radius: number;
+};
+/**
+ * 极坐标 ↔ 笛卡尔坐标 转换工具集。
+ *
+ * 注意 polar 不参与几何计算——参与计算时一律先用 `polar.toPosition` 转成 Position。
+ * 详见本文件顶部的整体说明。
+ */
+export declare const polar: {
+    /**
+     * 极坐标 → 笛卡尔位置（递归处理 origin）。
+     * **限制**：origin 为字符串（节点 id）时本方法无法解析，会抛错——
+     * 字符串解析依赖 Scene 编译器的 nodeIndex 上下文。
+     */
+    toPosition: (p: PolarPosition) => Position;
+    /** 笛卡尔位置 → 极坐标（angle 落在 (-180, 180]，origin 取默认 [0, 0]） */
+    fromPosition: (p: Position) => PolarPosition;
+    /** 在某个原点附近按极坐标偏移；返回结果点的世界笛卡尔坐标 */
+    offsetFrom: (origin: Position, offset: {
+        angle: number;
+        radius: number;
+    }) => Position;
+    /**
+     * 判断两个点是否相同（跨坐标系）。每个参数可以是笛卡尔 [x, y] 或 PolarPosition；
+     * 极坐标先转为笛卡尔，再按 precision 指定的小数位数四舍五入比较。
+     * 实际是 `point.equalPolar` 的别名（同一份实现，两处可发现）。
+     * @param precision 小数点后位数；默认 2
+     */
+    equal: (a: Position | PolarPosition, b: Position | PolarPosition, precision?: number) => boolean;
+};
+//# sourceMappingURL=polar.d.ts.map

package/dist/es/geometry/polar.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"polar.d.ts","sourceRoot":"","sources":["../../../src/geometry/polar.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,KAAK,QAAQ,EAAS,MAAM,SAAS,CAAC;AAkB/C;;;;;GAKG;AACH,MAAM,MAAM,aAAa,GAAG;IAC1B,8CAA8C;IAC9C,MAAM,CAAC,EAAE,MAAM,GAAG,QAAQ,GAAG,aAAa,CAAC;IAC3C,mCAAmC;IACnC,KAAK,EAAE,MAAM,CAAC;IACd,0BAA0B;IAC1B,MAAM,EAAE,MAAM,CAAC;CAChB,CAAC;AAKF;;;;;GAKG;AACH,eAAO,MAAM,KAAK;IAChB;;;;OAIG;oBACa,aAAa,KAAG,QAAQ;IAmBxC,0DAA0D;sBACxC,QAAQ,KAAG,aAAa;IAI1C,kCAAkC;yBAExB,QAAQ,UACR;QAAE,KAAK,EAAE,MAAM,CAAC;QAAC,MAAM,EAAE,MAAM,CAAA;KAAE,KACxC,QAAQ;IAOX;;;;;OAKG;eAEE,QAAQ,GAAG,aAAa,KACxB,QAAQ,GAAG,aAAa,yBAE1B,OAAO;CACX,CAAC"}

package/dist/es/geometry/polar.js

@@ -0,0 +1,45 @@
+import { point } from "./point.js";
+//#region src/geometry/polar.ts
+var DEG_TO_RAD = Math.PI / 180;
+var RAD_TO_DEG = 180 / Math.PI;
+/**
+* 极坐标 ↔ 笛卡尔坐标 转换工具集。
+*
+* 注意 polar 不参与几何计算——参与计算时一律先用 `polar.toPosition` 转成 Position。
+* 详见本文件顶部的整体说明。
+*/
+var polar = {
+	/**
+	* 极坐标 → 笛卡尔位置（递归处理 origin）。
+	* **限制**：origin 为字符串（节点 id）时本方法无法解析，会抛错——
+	* 字符串解析依赖 Scene 编译器的 nodeIndex 上下文。
+	*/
+	toPosition: (p) => {
+		let origin;
+		if (!p.origin) origin = [0, 0];
+		else if (typeof p.origin === "string") throw new Error("polar.toPosition: cannot resolve string origin (node id) without node context; use the Scene compiler");
+		else if (Array.isArray(p.origin)) origin = p.origin;
+		else origin = polar.toPosition(p.origin);
+		const rad = p.angle * DEG_TO_RAD;
+		return [origin[0] + Math.cos(rad) * p.radius, origin[1] + Math.sin(rad) * p.radius];
+	},
+	/** 笛卡尔位置 → 极坐标（angle 落在 (-180, 180]，origin 取默认 [0, 0]） */
+	fromPosition: (p) => ({
+		angle: Math.atan2(p[1], p[0]) * RAD_TO_DEG,
+		radius: Math.hypot(p[0], p[1])
+	}),
+	/** 在某个原点附近按极坐标偏移；返回结果点的世界笛卡尔坐标 */
+	offsetFrom: (origin, offset) => {
+		const rad = offset.angle * DEG_TO_RAD;
+		return [origin[0] + Math.cos(rad) * offset.radius, origin[1] + Math.sin(rad) * offset.radius];
+	},
+	/**
+	* 判断两个点是否相同（跨坐标系）。每个参数可以是笛卡尔 [x, y] 或 PolarPosition；
+	* 极坐标先转为笛卡尔，再按 precision 指定的小数位数四舍五入比较。
+	* 实际是 `point.equalPolar` 的别名（同一份实现，两处可发现）。
+	* @param precision 小数点后位数；默认 2
+	*/
+	equal: (a, b, precision = 2) => point.equalPolar(a, b, precision)
+};
+//#endregion
+export { polar };

package/dist/es/geometry/rect.d.ts

@@ -0,0 +1,59 @@
+import { Position } from './point';
+/** 轴对齐矩形：几何中心 (x, y) + 宽高 + 可选绕中心旋转 */
+export type Rect = {
+    /** 矩形几何中心横坐标 */
+    x: number;
+    /** 矩形几何中心纵坐标 */
+    y: number;
+    /** 矩形宽度（user units） */
+    width: number;
+    /** 矩形高度（user units） */
+    height: number;
+    /** 绕几何中心的旋转角（弧度）；省略或 0 表示不旋转 */
+    rotate?: number;
+};
+/**
+ * 矩形 9 个标准 anchor 名常量集合，对应 TikZ 节点的 9 个标准 anchor。
+ * 与 `RectAnchor` 类型配对使用——值用 `RECT_ANCHORS.NORTH` 避免拼错，
+ * 类型位置用 `RectAnchor`。
+ */
+export declare const RECT_ANCHORS: {
+    /** 几何中心 */
+    readonly CENTER: "center";
+    /** 上边中点 */
+    readonly NORTH: "north";
+    /** 下边中点 */
+    readonly SOUTH: "south";
+    /** 右边中点 */
+    readonly EAST: "east";
+    /** 左边中点 */
+    readonly WEST: "west";
+    /** 右上角 */
+    readonly NORTH_EAST: "north-east";
+    /** 左上角 */
+    readonly NORTH_WEST: "north-west";
+    /** 右下角 */
+    readonly SOUTH_EAST: "south-east";
+    /** 左下角 */
+    readonly SOUTH_WEST: "south-west";
+};
+/** 矩形 anchor 名（与 TikZ 命名约定一致），由 `RECT_ANCHORS` 常量集合派生 */
+export type RectAnchor = (typeof RECT_ANCHORS)[keyof typeof RECT_ANCHORS];
+/** 矩形相关基础工具 */
+export declare const rect: {
+    /** 矩形几何中心点 */
+    center: (r: Rect) => Position;
+    /** 判断点是否落在矩形范围内（含边界，考虑旋转） */
+    contains: (r: Rect, p: Position) => boolean;
+    /**
+     * 取矩形 9 个标准 anchor 之一的世界坐标，考虑旋转。
+     * 名字与 TikZ 节点 anchor 一致（north / south / east / west / north-east / ... / center）。
+     */
+    anchor: (r: Rect, name: RectAnchor) => Position;
+    /**
+     * 从矩形中心向 toward 方向画射线，求与矩形边界的交点（考虑旋转）。
+     * 用于把 Path 端点贴到 Node 边界（避免线段穿过节点内部）。
+     */
+    boundaryPoint: (r: Rect, toward: Position) => Position;
+};
+//# sourceMappingURL=rect.d.ts.map

package/dist/es/geometry/rect.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"rect.d.ts","sourceRoot":"","sources":["../../../src/geometry/rect.ts"],"names":[],"mappings":"AAAA,OAAO,KAAK,EAAE,QAAQ,EAAE,MAAM,SAAS,CAAC;AAExC,uCAAuC;AACvC,MAAM,MAAM,IAAI,GAAG;IACjB,gBAAgB;IAChB,CAAC,EAAE,MAAM,CAAC;IACV,gBAAgB;IAChB,CAAC,EAAE,MAAM,CAAC;IACV,uBAAuB;IACvB,KAAK,EAAE,MAAM,CAAC;IACd,uBAAuB;IACvB,MAAM,EAAE,MAAM,CAAC;IACf,gCAAgC;IAChC,MAAM,CAAC,EAAE,MAAM,CAAC;CACjB,CAAC;AAEF;;;;GAIG;AACH,eAAO,MAAM,YAAY;IACvB,WAAW;;IAEX,WAAW;;IAEX,WAAW;;IAEX,WAAW;;IAEX,WAAW;;IAEX,UAAU;;IAEV,UAAU;;IAEV,UAAU;;IAEV,UAAU;;CAEF,CAAC;AAEX,yDAAyD;AACzD,MAAM,MAAM,UAAU,GAAG,CAAC,OAAO,YAAY,CAAC,CAAC,MAAM,OAAO,YAAY,CAAC,CAAC;AAgC1E,eAAe;AACf,eAAO,MAAM,IAAI;IACf,cAAc;gBACF,IAAI,KAAG,QAAQ;IAC3B,6BAA6B;kBACf,IAAI,KAAK,QAAQ,KAAG,OAAO;IAMzC;;;OAGG;gBACS,IAAI,QAAQ,UAAU,KAAG,QAAQ;IAuC7C;;;OAGG;uBACgB,IAAI,UAAU,QAAQ,KAAG,QAAQ;CAUrD,CAAC"}

package/dist/es/geometry/rect.js

@@ -0,0 +1,120 @@
+//#region src/geometry/rect.ts
+/**
+* 矩形 9 个标准 anchor 名常量集合，对应 TikZ 节点的 9 个标准 anchor。
+* 与 `RectAnchor` 类型配对使用——值用 `RECT_ANCHORS.NORTH` 避免拼错，
+* 类型位置用 `RectAnchor`。
+*/
+var RECT_ANCHORS = {
+	/** 几何中心 */
+	CENTER: "center",
+	/** 上边中点 */
+	NORTH: "north",
+	/** 下边中点 */
+	SOUTH: "south",
+	/** 右边中点 */
+	EAST: "east",
+	/** 左边中点 */
+	WEST: "west",
+	/** 右上角 */
+	NORTH_EAST: "north-east",
+	/** 左上角 */
+	NORTH_WEST: "north-west",
+	/** 右下角 */
+	SOUTH_EAST: "south-east",
+	/** 左下角 */
+	SOUTH_WEST: "south-west"
+};
+/**
+* 把"以矩形中心为原点的本地坐标"转换为世界坐标。
+* 考虑 rect.rotate（弧度）的旋转。
+*/
+var localToWorld = (r, local) => {
+	const angle = r.rotate ?? 0;
+	if (angle === 0) return [r.x + local[0], r.y + local[1]];
+	const cos = Math.cos(angle);
+	const sin = Math.sin(angle);
+	return [r.x + local[0] * cos - local[1] * sin, r.y + local[0] * sin + local[1] * cos];
+};
+/**
+* 把世界坐标转换为"以矩形中心为原点的本地坐标"。
+* 与 localToWorld 互为逆变换。
+*/
+var worldToLocal = (r, world) => {
+	const tx = world[0] - r.x;
+	const ty = world[1] - r.y;
+	const angle = r.rotate ?? 0;
+	if (angle === 0) return [tx, ty];
+	const cos = Math.cos(angle);
+	const sin = Math.sin(angle);
+	return [tx * cos + ty * sin, -tx * sin + ty * cos];
+};
+/** 矩形相关基础工具 */
+var rect = {
+	/** 矩形几何中心点 */
+	center: (r) => [r.x, r.y],
+	/** 判断点是否落在矩形范围内（含边界，考虑旋转） */
+	contains: (r, p) => {
+		const [lx, ly] = worldToLocal(r, p);
+		const halfW = r.width / 2;
+		const halfH = r.height / 2;
+		return lx >= -halfW && lx <= halfW && ly >= -halfH && ly <= halfH;
+	},
+	/**
+	* 取矩形 9 个标准 anchor 之一的世界坐标，考虑旋转。
+	* 名字与 TikZ 节点 anchor 一致（north / south / east / west / north-east / ... / center）。
+	*/
+	anchor: (r, name) => {
+		const halfW = r.width / 2;
+		const halfH = r.height / 2;
+		let lx = 0;
+		let ly = 0;
+		switch (name) {
+			case "center": break;
+			case "north":
+				ly = -halfH;
+				break;
+			case "south":
+				ly = halfH;
+				break;
+			case "east":
+				lx = halfW;
+				break;
+			case "west":
+				lx = -halfW;
+				break;
+			case "north-east":
+				lx = halfW;
+				ly = -halfH;
+				break;
+			case "north-west":
+				lx = -halfW;
+				ly = -halfH;
+				break;
+			case "south-east":
+				lx = halfW;
+				ly = halfH;
+				break;
+			case "south-west":
+				lx = -halfW;
+				ly = halfH;
+				break;
+		}
+		return localToWorld(r, [lx, ly]);
+	},
+	/**
+	* 从矩形中心向 toward 方向画射线，求与矩形边界的交点（考虑旋转）。
+	* 用于把 Path 端点贴到 Node 边界（避免线段穿过节点内部）。
+	*/
+	boundaryPoint: (r, toward) => {
+		const [localX, localY] = worldToLocal(r, toward);
+		if (localX === 0 && localY === 0) return [r.x, r.y];
+		const halfW = r.width / 2;
+		const halfH = r.height / 2;
+		const tx = localX === 0 ? Infinity : halfW / Math.abs(localX);
+		const ty = localY === 0 ? Infinity : halfH / Math.abs(localY);
+		const t = Math.min(tx, ty);
+		return localToWorld(r, [localX * t, localY * t]);
+	}
+};
+//#endregion
+export { RECT_ANCHORS, rect };

package/dist/es/index.d.ts

@@ -1,10 +1,20 @@
-export { default as Draw } from './components/draw';
-export type { DrawProps } from './components/draw';
-export { default as Node } from './components/node';
-export type { NodeProps } from './components/node';
-export { default as PathNode } from './components/path-node';
-export type { PathNodeProps } from './components/path-node';
-export { default as Scope } from './components/Scope';
-export type { ScopeProps } from './components/Scope';
-export { default as TikZ } from './components/TikZ';
-export type { TikZProps } from './components/TikZ';
+/**
+ * @retikz/core 公开 API
+ *
+ * 任何 framework adapter（@retikz/react、@retikz/vue、@retikz/canvas、@retikz/ssr）
+ * 只能 import 本文件导出的内容，不准走子路径。
+ *
+ * 本包零 React、零 DOM 依赖。
+ */
+export { PositionSchema, PolarPositionSchema, TargetSchema, MoveStepSchema, LineStepSchema, FoldStepSchema, CycleStepSchema, StepSchema, NodeSchema, PathSchema, ChildSchema, SceneSchema, CURRENT_IR_VERSION, } from './ir';
+export type { IRPosition, IRTarget, IRMoveStep, IRLineStep, IRFoldStep, IRCycleStep, IRStep, IRNode, IRPath, IRChild, IR, ArrowShape, NodeShape, } from './ir';
+export { ARROW_SHAPES, NODE_SHAPES } from './ir';
+export type { ScenePrimitive, RectPrim, EllipsePrim, TextPrim, PathPrim, GroupPrim, ViewBox, Scene, } from './primitive';
+export type { FontSpec, TextMetrics, TextMeasurer, CompileOptions, } from './compile';
+export { fallbackMeasurer, compileToScene } from './compile';
+export type { WayItem, WayDSL, WayCycle, WayVia } from './parsers';
+export { parseWay, DrawWay } from './parsers';
+export type { Position, Rect, RectAnchor, Circle, CircleAnchor, Ellipse, EllipseAnchor, Diamond, DiamondAnchor, PolarPosition, } from './geometry';
+export { point, rect, circle, ellipse, diamond, RECT_ANCHORS, polar } from './geometry';
+export type { ValueOf } from './types';
+//# sourceMappingURL=index.d.ts.map

package/dist/es/index.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"index.d.ts","sourceRoot":"","sources":["../../src/index.ts"],"names":[],"mappings":"AAAA;;;;;;;GAOG;AAGH,OAAO,EACL,cAAc,EACd,mBAAmB,EACnB,YAAY,EACZ,cAAc,EACd,cAAc,EACd,cAAc,EACd,eAAe,EACf,UAAU,EACV,UAAU,EACV,UAAU,EACV,WAAW,EACX,WAAW,EACX,kBAAkB,GACnB,MAAM,MAAM,CAAC;AACd,YAAY,EACV,UAAU,EACV,QAAQ,EACR,UAAU,EACV,UAAU,EACV,UAAU,EACV,WAAW,EACX,MAAM,EACN,MAAM,EACN,MAAM,EACN,OAAO,EACP,EAAE,EACF,UAAU,EACV,SAAS,GACV,MAAM,MAAM,CAAC;AACd,OAAO,EAAE,YAAY,EAAE,WAAW,EAAE,MAAM,MAAM,CAAC;AAGjD,YAAY,EACV,cAAc,EACd,QAAQ,EACR,WAAW,EACX,QAAQ,EACR,QAAQ,EACR,SAAS,EACT,OAAO,EACP,KAAK,GACN,MAAM,aAAa,CAAC;AAGrB,YAAY,EACV,QAAQ,EACR,WAAW,EACX,YAAY,EACZ,cAAc,GACf,MAAM,WAAW,CAAC;AACnB,OAAO,EAAE,gBAAgB,EAAE,cAAc,EAAE,MAAM,WAAW,CAAC;AAG7D,YAAY,EAAE,OAAO,EAAE,MAAM,EAAE,QAAQ,EAAE,MAAM,EAAE,MAAM,WAAW,CAAC;AACnE,OAAO,EAAE,QAAQ,EAAE,OAAO,EAAE,MAAM,WAAW,CAAC;AAI9C,YAAY,EACV,QAAQ,EACR,IAAI,EACJ,UAAU,EACV,MAAM,EACN,YAAY,EACZ,OAAO,EACP,aAAa,EACb,OAAO,EACP,aAAa,EACb,aAAa,GACd,MAAM,YAAY,CAAC;AACpB,OAAO,EAAE,KAAK,EAAE,IAAI,EAAE,MAAM,EAAE,OAAO,EAAE,OAAO,EAAE,YAAY,EAAE,KAAK,EAAE,MAAM,YAAY,CAAC;AAGxF,YAAY,EAAE,OAAO,EAAE,MAAM,SAAS,CAAC"}

package/dist/es/index.js

@@ -1,12 +1,18 @@
-import { default as default2 } from "./components/draw/Draw.js";
-import { default as default3 } from "./components/node/Node.js";
-import { default as default4 } from "./components/path-node/PathNode.js";
-import { default as default5 } from "./components/Scope.js";
-import { default as default6 } from "./components/TikZ.js";
-export {
-  default2 as Draw,
-  default3 as Node,
-  default4 as PathNode,
-  default5 as Scope,
-  default6 as TikZ
-};
+import { PositionSchema } from "./ir/position/position.js";
+import { PolarPositionSchema } from "./ir/position/polar-position.js";
+import { ARROW_SHAPES } from "./ir/path/arrow.js";
+import { TargetSchema } from "./ir/path/target.js";
+import { CycleStepSchema, FoldStepSchema, LineStepSchema, MoveStepSchema, StepSchema } from "./ir/path/step.js";
+import { PathSchema } from "./ir/path/path.js";
+import { NODE_SHAPES, NodeSchema } from "./ir/node.js";
+import { CURRENT_IR_VERSION, ChildSchema, SceneSchema } from "./ir/scene.js";
+import { RECT_ANCHORS, rect } from "./geometry/rect.js";
+import { circle } from "./geometry/circle.js";
+import { diamond } from "./geometry/diamond.js";
+import { ellipse } from "./geometry/ellipse.js";
+import { fallbackMeasurer } from "./compile/text-metrics.js";
+import { compileToScene } from "./compile/compile.js";
+import { DrawWay, parseWay } from "./parsers/parseWay.js";
+import { polar } from "./geometry/polar.js";
+import { point } from "./geometry/point.js";
+export { ARROW_SHAPES, CURRENT_IR_VERSION, ChildSchema, CycleStepSchema, DrawWay, FoldStepSchema, LineStepSchema, MoveStepSchema, NODE_SHAPES, NodeSchema, PathSchema, PolarPositionSchema, PositionSchema, RECT_ANCHORS, SceneSchema, StepSchema, TargetSchema, circle, compileToScene, diamond, ellipse, fallbackMeasurer, parseWay, point, polar, rect };

package/dist/es/ir/index.d.ts

@@ -0,0 +1,5 @@
+export * from './position';
+export * from './path';
+export * from './node';
+export * from './scene';
+//# sourceMappingURL=index.d.ts.map

package/dist/es/ir/index.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"index.d.ts","sourceRoot":"","sources":["../../../src/ir/index.ts"],"names":[],"mappings":"AAAA,cAAc,YAAY,CAAC;AAC3B,cAAc,QAAQ,CAAC;AACvB,cAAc,QAAQ,CAAC;AACvB,cAAc,SAAS,CAAC"}