@recallai/desktop-sdk 2024.10.16-348bb0a1cdf9c002fa25ef93373a09667bd4e463 → 2024.10.16-453fae05e0e4b90869a62e06a4c266ed53f681b6

package/desktop_sdk_macos.framework/Versions/A/Frameworks/GStreamer.framework/Versions/1.0/include/FLAC/stream_encoder.h

@@ -1,1790 +0,0 @@
-/* libFLAC - Free Lossless Audio Codec library
- * Copyright (C) 2000-2009  Josh Coalson
- * Copyright (C) 2011-2016  Xiph.Org Foundation
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * - Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- *
- * - Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * - Neither the name of the Xiph.org Foundation nor the names of its
- * contributors may be used to endorse or promote products derived from
- * this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef FLAC__STREAM_ENCODER_H
-#define FLAC__STREAM_ENCODER_H
-
-#include <stdio.h> /* for FILE */
-#include "export.h"
-#include "format.h"
-#include "stream_decoder.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-/** \file include/FLAC/stream_encoder.h
- *
- *  \brief
- *  This module contains the functions which implement the stream
- *  encoder.
- *
- *  See the detailed documentation in the
- *  \link flac_stream_encoder stream encoder \endlink module.
- */
-
-/** \defgroup flac_encoder FLAC/ \*_encoder.h: encoder interfaces
- *  \ingroup flac
- *
- *  \brief
- *  This module describes the encoder layers provided by libFLAC.
- *
- * The stream encoder can be used to encode complete streams either to the
- * client via callbacks, or directly to a file, depending on how it is
- * initialized.  When encoding via callbacks, the client provides a write
- * callback which will be called whenever FLAC data is ready to be written.
- * If the client also supplies a seek callback, the encoder will also
- * automatically handle the writing back of metadata discovered while
- * encoding, like stream info, seek points offsets, etc.  When encoding to
- * a file, the client needs only supply a filename or open \c FILE* and an
- * optional progress callback for periodic notification of progress; the
- * write and seek callbacks are supplied internally.  For more info see the
- * \link flac_stream_encoder stream encoder \endlink module.
- */
-
-/** \defgroup flac_stream_encoder FLAC/stream_encoder.h: stream encoder interface
- *  \ingroup flac_encoder
- *
- *  \brief
- *  This module contains the functions which implement the stream
- *  encoder.
- *
- * The stream encoder can encode to native FLAC, and optionally Ogg FLAC
- * (check FLAC_API_SUPPORTS_OGG_FLAC) streams and files.
- *
- * The basic usage of this encoder is as follows:
- * - The program creates an instance of an encoder using
- *   FLAC__stream_encoder_new().
- * - The program overrides the default settings using
- *   FLAC__stream_encoder_set_*() functions.  At a minimum, the following
- *   functions should be called:
- *   - FLAC__stream_encoder_set_channels()
- *   - FLAC__stream_encoder_set_bits_per_sample()
- *   - FLAC__stream_encoder_set_sample_rate()
- *   - FLAC__stream_encoder_set_ogg_serial_number() (if encoding to Ogg FLAC)
- *   - FLAC__stream_encoder_set_total_samples_estimate() (if known)
- * - If the application wants to control the compression level or set its own
- *   metadata, then the following should also be called:
- *   - FLAC__stream_encoder_set_compression_level()
- *   - FLAC__stream_encoder_set_verify()
- *   - FLAC__stream_encoder_set_metadata()
- * - The rest of the set functions should only be called if the client needs
- *   exact control over how the audio is compressed; thorough understanding
- *   of the FLAC format is necessary to achieve good results.
- * - The program initializes the instance to validate the settings and
- *   prepare for encoding using
- *   - FLAC__stream_encoder_init_stream() or FLAC__stream_encoder_init_FILE()
- *     or FLAC__stream_encoder_init_file() for native FLAC
- *   - FLAC__stream_encoder_init_ogg_stream() or FLAC__stream_encoder_init_ogg_FILE()
- *     or FLAC__stream_encoder_init_ogg_file() for Ogg FLAC
- * - The program calls FLAC__stream_encoder_process() or
- *   FLAC__stream_encoder_process_interleaved() to encode data, which
- *   subsequently calls the callbacks when there is encoder data ready
- *   to be written.
- * - The program finishes the encoding with FLAC__stream_encoder_finish(),
- *   which causes the encoder to encode any data still in its input pipe,
- *   update the metadata with the final encoding statistics if output
- *   seeking is possible, and finally reset the encoder to the
- *   uninitialized state.
- * - The instance may be used again or deleted with
- *   FLAC__stream_encoder_delete().
- *
- * In more detail, the stream encoder functions similarly to the
- * \link flac_stream_decoder stream decoder \endlink, but has fewer
- * callbacks and more options.  Typically the client will create a new
- * instance by calling FLAC__stream_encoder_new(), then set the necessary
- * parameters with FLAC__stream_encoder_set_*(), and initialize it by
- * calling one of the FLAC__stream_encoder_init_*() functions.
- *
- * Unlike the decoders, the stream encoder has many options that can
- * affect the speed and compression ratio.  When setting these parameters
- * you should have some basic knowledge of the format (see the
- * <A HREF="../documentation_format_overview.html">user-level documentation</A>
- * or the <A HREF="../format.html">formal description</A>).  The
- * FLAC__stream_encoder_set_*() functions themselves do not validate the
- * values as many are interdependent.  The FLAC__stream_encoder_init_*()
- * functions will do this, so make sure to pay attention to the state
- * returned by FLAC__stream_encoder_init_*() to make sure that it is
- * FLAC__STREAM_ENCODER_INIT_STATUS_OK.  Any parameters that are not set
- * before FLAC__stream_encoder_init_*() will take on the defaults from
- * the constructor.
- *
- * There are three initialization functions for native FLAC, one for
- * setting up the encoder to encode FLAC data to the client via
- * callbacks, and two for encoding directly to a file.
- *
- * For encoding via callbacks, use FLAC__stream_encoder_init_stream().
- * You must also supply a write callback which will be called anytime
- * there is raw encoded data to write.  If the client can seek the output
- * it is best to also supply seek and tell callbacks, as this allows the
- * encoder to go back after encoding is finished to write back
- * information that was collected while encoding, like seek point offsets,
- * frame sizes, etc.
- *
- * For encoding directly to a file, use FLAC__stream_encoder_init_FILE()
- * or FLAC__stream_encoder_init_file().  Then you must only supply a
- * filename or open \c FILE*; the encoder will handle all the callbacks
- * internally.  You may also supply a progress callback for periodic
- * notification of the encoding progress.
- *
- * There are three similarly-named init functions for encoding to Ogg
- * FLAC streams.  Check \c FLAC_API_SUPPORTS_OGG_FLAC to find out if the
- * library has been built with Ogg support.
- *
- * The call to FLAC__stream_encoder_init_*() currently will also immediately
- * call the write callback several times, once with the \c fLaC signature,
- * and once for each encoded metadata block.  Note that for Ogg FLAC
- * encoding you will usually get at least twice the number of callbacks than
- * with native FLAC, one for the Ogg page header and one for the page body.
- *
- * After initializing the instance, the client may feed audio data to the
- * encoder in one of two ways:
- *
- * - Channel separate, through FLAC__stream_encoder_process() - The client
- *   will pass an array of pointers to buffers, one for each channel, to
- *   the encoder, each of the same length.  The samples need not be
- *   block-aligned, but each channel should have the same number of samples.
- * - Channel interleaved, through
- *   FLAC__stream_encoder_process_interleaved() - The client will pass a single
- *   pointer to data that is channel-interleaved (i.e. channel0_sample0,
- *   channel1_sample0, ... , channelN_sample0, channel0_sample1, ...).
- *   Again, the samples need not be block-aligned but they must be
- *   sample-aligned, i.e. the first value should be channel0_sample0 and
- *   the last value channelN_sampleM.
- *
- * Note that for either process call, each sample in the buffers should be a
- * signed integer, right-justified to the resolution set by
- * FLAC__stream_encoder_set_bits_per_sample().  For example, if the resolution
- * is 16 bits per sample, the samples should all be in the range [-32768,32767].
- *
- * When the client is finished encoding data, it calls
- * FLAC__stream_encoder_finish(), which causes the encoder to encode any
- * data still in its input pipe, and call the metadata callback with the
- * final encoding statistics.  Then the instance may be deleted with
- * FLAC__stream_encoder_delete() or initialized again to encode another
- * stream.
- *
- * For programs that write their own metadata, but that do not know the
- * actual metadata until after encoding, it is advantageous to instruct
- * the encoder to write a PADDING block of the correct size, so that
- * instead of rewriting the whole stream after encoding, the program can
- * just overwrite the PADDING block.  If only the maximum size of the
- * metadata is known, the program can write a slightly larger padding
- * block, then split it after encoding.
- *
- * Make sure you understand how lengths are calculated.  All FLAC metadata
- * blocks have a 4 byte header which contains the type and length.  This
- * length does not include the 4 bytes of the header.  See the format page
- * for the specification of metadata blocks and their lengths.
- *
- * \note
- * If you are writing the FLAC data to a file via callbacks, make sure it
- * is open for update (e.g. mode "w+" for stdio streams).  This is because
- * after the first encoding pass, the encoder will try to seek back to the
- * beginning of the stream, to the STREAMINFO block, to write some data
- * there.  (If using FLAC__stream_encoder_init*_file() or
- * FLAC__stream_encoder_init*_FILE(), the file is managed internally.)
- *
- * \note
- * The "set" functions may only be called when the encoder is in the
- * state FLAC__STREAM_ENCODER_UNINITIALIZED, i.e. after
- * FLAC__stream_encoder_new() or FLAC__stream_encoder_finish(), but
- * before FLAC__stream_encoder_init_*().  If this is the case they will
- * return \c true, otherwise \c false.
- *
- * \note
- * FLAC__stream_encoder_finish() resets all settings to the constructor
- * defaults.
- *
- * \{
- */
-
-
-/** State values for a FLAC__StreamEncoder.
- *
- * The encoder's state can be obtained by calling FLAC__stream_encoder_get_state().
- *
- * If the encoder gets into any other state besides \c FLAC__STREAM_ENCODER_OK
- * or \c FLAC__STREAM_ENCODER_UNINITIALIZED, it becomes invalid for encoding and
- * must be deleted with FLAC__stream_encoder_delete().
- */
-typedef enum {
-
-	FLAC__STREAM_ENCODER_OK = 0,
-	/**< The encoder is in the normal OK state and samples can be processed. */
-
-	FLAC__STREAM_ENCODER_UNINITIALIZED,
-	/**< The encoder is in the uninitialized state; one of the
-	 * FLAC__stream_encoder_init_*() functions must be called before samples
-	 * can be processed.
-	 */
-
-	FLAC__STREAM_ENCODER_OGG_ERROR,
-	/**< An error occurred in the underlying Ogg layer.  */
-
-	FLAC__STREAM_ENCODER_VERIFY_DECODER_ERROR,
-	/**< An error occurred in the underlying verify stream decoder;
-	 * check FLAC__stream_encoder_get_verify_decoder_state().
-	 */
-
-	FLAC__STREAM_ENCODER_VERIFY_MISMATCH_IN_AUDIO_DATA,
-	/**< The verify decoder detected a mismatch between the original
-	 * audio signal and the decoded audio signal.
-	 */
-
-	FLAC__STREAM_ENCODER_CLIENT_ERROR,
-	/**< One of the callbacks returned a fatal error. */
-
-	FLAC__STREAM_ENCODER_IO_ERROR,
-	/**< An I/O error occurred while opening/reading/writing a file.
-	 * Check \c errno.
-	 */
-
-	FLAC__STREAM_ENCODER_FRAMING_ERROR,
-	/**< An error occurred while writing the stream; usually, the
-	 * write_callback returned an error.
-	 */
-
-	FLAC__STREAM_ENCODER_MEMORY_ALLOCATION_ERROR
-	/**< Memory allocation failed. */
-
-} FLAC__StreamEncoderState;
-
-/** Maps a FLAC__StreamEncoderState to a C string.
- *
- *  Using a FLAC__StreamEncoderState as the index to this array
- *  will give the string equivalent.  The contents should not be modified.
- */
-extern FLAC_API const char * const FLAC__StreamEncoderStateString[];
-
-
-/** Possible return values for the FLAC__stream_encoder_init_*() functions.
- */
-typedef enum {
-
-	FLAC__STREAM_ENCODER_INIT_STATUS_OK = 0,
-	/**< Initialization was successful. */
-
-	FLAC__STREAM_ENCODER_INIT_STATUS_ENCODER_ERROR,
-	/**< General failure to set up encoder; call FLAC__stream_encoder_get_state() for cause. */
-
-	FLAC__STREAM_ENCODER_INIT_STATUS_UNSUPPORTED_CONTAINER,
-	/**< The library was not compiled with support for the given container
-	 * format.
-	 */
-
-	FLAC__STREAM_ENCODER_INIT_STATUS_INVALID_CALLBACKS,
-	/**< A required callback was not supplied. */
-
-	FLAC__STREAM_ENCODER_INIT_STATUS_INVALID_NUMBER_OF_CHANNELS,
-	/**< The encoder has an invalid setting for number of channels. */
-
-	FLAC__STREAM_ENCODER_INIT_STATUS_INVALID_BITS_PER_SAMPLE,
-	/**< The encoder has an invalid setting for bits-per-sample.
-	 * FLAC supports 4-32 bps but the reference encoder currently supports
-	 * only up to 24 bps.
-	 */
-
-	FLAC__STREAM_ENCODER_INIT_STATUS_INVALID_SAMPLE_RATE,
-	/**< The encoder has an invalid setting for the input sample rate. */
-
-	FLAC__STREAM_ENCODER_INIT_STATUS_INVALID_BLOCK_SIZE,
-	/**< The encoder has an invalid setting for the block size. */
-
-	FLAC__STREAM_ENCODER_INIT_STATUS_INVALID_MAX_LPC_ORDER,
-	/**< The encoder has an invalid setting for the maximum LPC order. */
-
-	FLAC__STREAM_ENCODER_INIT_STATUS_INVALID_QLP_COEFF_PRECISION,
-	/**< The encoder has an invalid setting for the precision of the quantized linear predictor coefficients. */
-
-	FLAC__STREAM_ENCODER_INIT_STATUS_BLOCK_SIZE_TOO_SMALL_FOR_LPC_ORDER,
-	/**< The specified block size is less than the maximum LPC order. */
-
-	FLAC__STREAM_ENCODER_INIT_STATUS_NOT_STREAMABLE,
-	/**< The encoder is bound to the <A HREF="../format.html#subset">Subset</A> but other settings violate it. */
-
-	FLAC__STREAM_ENCODER_INIT_STATUS_INVALID_METADATA,
-	/**< The metadata input to the encoder is invalid, in one of the following ways:
-	 * - FLAC__stream_encoder_set_metadata() was called with a null pointer but a block count > 0
-	 * - One of the metadata blocks contains an undefined type
-	 * - It contains an illegal CUESHEET as checked by FLAC__format_cuesheet_is_legal()
-	 * - It contains an illegal SEEKTABLE as checked by FLAC__format_seektable_is_legal()
-	 * - It contains more than one SEEKTABLE block or more than one VORBIS_COMMENT block
-	 */
-
-	FLAC__STREAM_ENCODER_INIT_STATUS_ALREADY_INITIALIZED
-	/**< FLAC__stream_encoder_init_*() was called when the encoder was
-	 * already initialized, usually because
-	 * FLAC__stream_encoder_finish() was not called.
-	 */
-
-} FLAC__StreamEncoderInitStatus;
-
-/** Maps a FLAC__StreamEncoderInitStatus to a C string.
- *
- *  Using a FLAC__StreamEncoderInitStatus as the index to this array
- *  will give the string equivalent.  The contents should not be modified.
- */
-extern FLAC_API const char * const FLAC__StreamEncoderInitStatusString[];
-
-
-/** Return values for the FLAC__StreamEncoder read callback.
- */
-typedef enum {
-
-	FLAC__STREAM_ENCODER_READ_STATUS_CONTINUE,
-	/**< The read was OK and decoding can continue. */
-
-	FLAC__STREAM_ENCODER_READ_STATUS_END_OF_STREAM,
-	/**< The read was attempted at the end of the stream. */
-
-	FLAC__STREAM_ENCODER_READ_STATUS_ABORT,
-	/**< An unrecoverable error occurred. */
-
-	FLAC__STREAM_ENCODER_READ_STATUS_UNSUPPORTED
-	/**< Client does not support reading back from the output. */
-
-} FLAC__StreamEncoderReadStatus;
-
-/** Maps a FLAC__StreamEncoderReadStatus to a C string.
- *
- *  Using a FLAC__StreamEncoderReadStatus as the index to this array
- *  will give the string equivalent.  The contents should not be modified.
- */
-extern FLAC_API const char * const FLAC__StreamEncoderReadStatusString[];
-
-
-/** Return values for the FLAC__StreamEncoder write callback.
- */
-typedef enum {
-
-	FLAC__STREAM_ENCODER_WRITE_STATUS_OK = 0,
-	/**< The write was OK and encoding can continue. */
-
-	FLAC__STREAM_ENCODER_WRITE_STATUS_FATAL_ERROR
-	/**< An unrecoverable error occurred.  The encoder will return from the process call. */
-
-} FLAC__StreamEncoderWriteStatus;
-
-/** Maps a FLAC__StreamEncoderWriteStatus to a C string.
- *
- *  Using a FLAC__StreamEncoderWriteStatus as the index to this array
- *  will give the string equivalent.  The contents should not be modified.
- */
-extern FLAC_API const char * const FLAC__StreamEncoderWriteStatusString[];
-
-
-/** Return values for the FLAC__StreamEncoder seek callback.
- */
-typedef enum {
-
-	FLAC__STREAM_ENCODER_SEEK_STATUS_OK,
-	/**< The seek was OK and encoding can continue. */
-
-	FLAC__STREAM_ENCODER_SEEK_STATUS_ERROR,
-	/**< An unrecoverable error occurred. */
-
-	FLAC__STREAM_ENCODER_SEEK_STATUS_UNSUPPORTED
-	/**< Client does not support seeking. */
-
-} FLAC__StreamEncoderSeekStatus;
-
-/** Maps a FLAC__StreamEncoderSeekStatus to a C string.
- *
- *  Using a FLAC__StreamEncoderSeekStatus as the index to this array
- *  will give the string equivalent.  The contents should not be modified.
- */
-extern FLAC_API const char * const FLAC__StreamEncoderSeekStatusString[];
-
-
-/** Return values for the FLAC__StreamEncoder tell callback.
- */
-typedef enum {
-
-	FLAC__STREAM_ENCODER_TELL_STATUS_OK,
-	/**< The tell was OK and encoding can continue. */
-
-	FLAC__STREAM_ENCODER_TELL_STATUS_ERROR,
-	/**< An unrecoverable error occurred. */
-
-	FLAC__STREAM_ENCODER_TELL_STATUS_UNSUPPORTED
-	/**< Client does not support seeking. */
-
-} FLAC__StreamEncoderTellStatus;
-
-/** Maps a FLAC__StreamEncoderTellStatus to a C string.
- *
- *  Using a FLAC__StreamEncoderTellStatus as the index to this array
- *  will give the string equivalent.  The contents should not be modified.
- */
-extern FLAC_API const char * const FLAC__StreamEncoderTellStatusString[];
-
-
-/***********************************************************************
- *
- * class FLAC__StreamEncoder
- *
- ***********************************************************************/
-
-struct FLAC__StreamEncoderProtected;
-struct FLAC__StreamEncoderPrivate;
-/** The opaque structure definition for the stream encoder type.
- *  See the \link flac_stream_encoder stream encoder module \endlink
- *  for a detailed description.
- */
-typedef struct {
-	struct FLAC__StreamEncoderProtected *protected_; /* avoid the C++ keyword 'protected' */
-	struct FLAC__StreamEncoderPrivate *private_; /* avoid the C++ keyword 'private' */
-} FLAC__StreamEncoder;
-
-/** Signature for the read callback.
- *
- *  A function pointer matching this signature must be passed to
- *  FLAC__stream_encoder_init_ogg_stream() if seeking is supported.
- *  The supplied function will be called when the encoder needs to read back
- *  encoded data.  This happens during the metadata callback, when the encoder
- *  has to read, modify, and rewrite the metadata (e.g. seekpoints) gathered
- *  while encoding.  The address of the buffer to be filled is supplied, along
- *  with the number of bytes the buffer can hold.  The callback may choose to
- *  supply less data and modify the byte count but must be careful not to
- *  overflow the buffer.  The callback then returns a status code chosen from
- *  FLAC__StreamEncoderReadStatus.
- *
- * Here is an example of a read callback for stdio streams:
- * \code
- * FLAC__StreamEncoderReadStatus read_cb(const FLAC__StreamEncoder *encoder, FLAC__byte buffer[], size_t *bytes, void *client_data)
- * {
- *   FILE *file = ((MyClientData*)client_data)->file;
- *   if(*bytes > 0) {
- *     *bytes = fread(buffer, sizeof(FLAC__byte), *bytes, file);
- *     if(ferror(file))
- *       return FLAC__STREAM_ENCODER_READ_STATUS_ABORT;
- *     else if(*bytes == 0)
- *       return FLAC__STREAM_ENCODER_READ_STATUS_END_OF_STREAM;
- *     else
- *       return FLAC__STREAM_ENCODER_READ_STATUS_CONTINUE;
- *   }
- *   else
- *     return FLAC__STREAM_ENCODER_READ_STATUS_ABORT;
- * }
- * \endcode
- *
- * \note In general, FLAC__StreamEncoder functions which change the
- * state should not be called on the \a encoder while in the callback.
- *
- * \param  encoder  The encoder instance calling the callback.
- * \param  buffer   A pointer to a location for the callee to store
- *                  data to be encoded.
- * \param  bytes    A pointer to the size of the buffer.  On entry
- *                  to the callback, it contains the maximum number
- *                  of bytes that may be stored in \a buffer.  The
- *                  callee must set it to the actual number of bytes
- *                  stored (0 in case of error or end-of-stream) before
- *                  returning.
- * \param  client_data  The callee's client data set through
- *                      FLAC__stream_encoder_set_client_data().
- * \retval FLAC__StreamEncoderReadStatus
- *    The callee's return status.
- */
-typedef FLAC__StreamEncoderReadStatus (*FLAC__StreamEncoderReadCallback)(const FLAC__StreamEncoder *encoder, FLAC__byte buffer[], size_t *bytes, void *client_data);
-
-/** Signature for the write callback.
- *
- *  A function pointer matching this signature must be passed to
- *  FLAC__stream_encoder_init*_stream().  The supplied function will be called
- *  by the encoder anytime there is raw encoded data ready to write.  It may
- *  include metadata mixed with encoded audio frames and the data is not
- *  guaranteed to be aligned on frame or metadata block boundaries.
- *
- *  The only duty of the callback is to write out the \a bytes worth of data
- *  in \a buffer to the current position in the output stream.  The arguments
- *  \a samples and \a current_frame are purely informational.  If \a samples
- *  is greater than \c 0, then \a current_frame will hold the current frame
- *  number that is being written; otherwise it indicates that the write
- *  callback is being called to write metadata.
- *
- * \note
- * Unlike when writing to native FLAC, when writing to Ogg FLAC the
- * write callback will be called twice when writing each audio
- * frame; once for the page header, and once for the page body.
- * When writing the page header, the \a samples argument to the
- * write callback will be \c 0.
- *
- * \note In general, FLAC__StreamEncoder functions which change the
- * state should not be called on the \a encoder while in the callback.
- *
- * \param  encoder  The encoder instance calling the callback.
- * \param  buffer   An array of encoded data of length \a bytes.
- * \param  bytes    The byte length of \a buffer.
- * \param  samples  The number of samples encoded by \a buffer.
- *                  \c 0 has a special meaning; see above.
- * \param  current_frame  The number of the current frame being encoded.
- * \param  client_data  The callee's client data set through
- *                      FLAC__stream_encoder_init_*().
- * \retval FLAC__StreamEncoderWriteStatus
- *    The callee's return status.
- */
-typedef FLAC__StreamEncoderWriteStatus (*FLAC__StreamEncoderWriteCallback)(const FLAC__StreamEncoder *encoder, const FLAC__byte buffer[], size_t bytes, uint32_t samples, uint32_t current_frame, void *client_data);
-
-/** Signature for the seek callback.
- *
- *  A function pointer matching this signature may be passed to
- *  FLAC__stream_encoder_init*_stream().  The supplied function will be called
- *  when the encoder needs to seek the output stream.  The encoder will pass
- *  the absolute byte offset to seek to, 0 meaning the beginning of the stream.
- *
- * Here is an example of a seek callback for stdio streams:
- * \code
- * FLAC__StreamEncoderSeekStatus seek_cb(const FLAC__StreamEncoder *encoder, FLAC__uint64 absolute_byte_offset, void *client_data)
- * {
- *   FILE *file = ((MyClientData*)client_data)->file;
- *   if(file == stdin)
- *     return FLAC__STREAM_ENCODER_SEEK_STATUS_UNSUPPORTED;
- *   else if(fseeko(file, (off_t)absolute_byte_offset, SEEK_SET) < 0)
- *     return FLAC__STREAM_ENCODER_SEEK_STATUS_ERROR;
- *   else
- *     return FLAC__STREAM_ENCODER_SEEK_STATUS_OK;
- * }
- * \endcode
- *
- * \note In general, FLAC__StreamEncoder functions which change the
- * state should not be called on the \a encoder while in the callback.
- *
- * \param  encoder  The encoder instance calling the callback.
- * \param  absolute_byte_offset  The offset from the beginning of the stream
- *                               to seek to.
- * \param  client_data  The callee's client data set through
- *                      FLAC__stream_encoder_init_*().
- * \retval FLAC__StreamEncoderSeekStatus
- *    The callee's return status.
- */
-typedef FLAC__StreamEncoderSeekStatus (*FLAC__StreamEncoderSeekCallback)(const FLAC__StreamEncoder *encoder, FLAC__uint64 absolute_byte_offset, void *client_data);
-
-/** Signature for the tell callback.
- *
- *  A function pointer matching this signature may be passed to
- *  FLAC__stream_encoder_init*_stream().  The supplied function will be called
- *  when the encoder needs to know the current position of the output stream.
- *
- * \warning
- * The callback must return the true current byte offset of the output to
- * which the encoder is writing.  If you are buffering the output, make
- * sure and take this into account.  If you are writing directly to a
- * FILE* from your write callback, ftell() is sufficient.  If you are
- * writing directly to a file descriptor from your write callback, you
- * can use lseek(fd, SEEK_CUR, 0).  The encoder may later seek back to
- * these points to rewrite metadata after encoding.
- *
- * Here is an example of a tell callback for stdio streams:
- * \code
- * FLAC__StreamEncoderTellStatus tell_cb(const FLAC__StreamEncoder *encoder, FLAC__uint64 *absolute_byte_offset, void *client_data)
- * {
- *   FILE *file = ((MyClientData*)client_data)->file;
- *   off_t pos;
- *   if(file == stdin)
- *     return FLAC__STREAM_ENCODER_TELL_STATUS_UNSUPPORTED;
- *   else if((pos = ftello(file)) < 0)
- *     return FLAC__STREAM_ENCODER_TELL_STATUS_ERROR;
- *   else {
- *     *absolute_byte_offset = (FLAC__uint64)pos;
- *     return FLAC__STREAM_ENCODER_TELL_STATUS_OK;
- *   }
- * }
- * \endcode
- *
- * \note In general, FLAC__StreamEncoder functions which change the
- * state should not be called on the \a encoder while in the callback.
- *
- * \param  encoder  The encoder instance calling the callback.
- * \param  absolute_byte_offset  The address at which to store the current
- *                               position of the output.
- * \param  client_data  The callee's client data set through
- *                      FLAC__stream_encoder_init_*().
- * \retval FLAC__StreamEncoderTellStatus
- *    The callee's return status.
- */
-typedef FLAC__StreamEncoderTellStatus (*FLAC__StreamEncoderTellCallback)(const FLAC__StreamEncoder *encoder, FLAC__uint64 *absolute_byte_offset, void *client_data);
-
-/** Signature for the metadata callback.
- *
- *  A function pointer matching this signature may be passed to
- *  FLAC__stream_encoder_init*_stream().  The supplied function will be called
- *  once at the end of encoding with the populated STREAMINFO structure.  This
- *  is so the client can seek back to the beginning of the file and write the
- *  STREAMINFO block with the correct statistics after encoding (like
- *  minimum/maximum frame size and total samples).
- *
- * \note In general, FLAC__StreamEncoder functions which change the
- * state should not be called on the \a encoder while in the callback.
- *
- * \param  encoder      The encoder instance calling the callback.
- * \param  metadata     The final populated STREAMINFO block.
- * \param  client_data  The callee's client data set through
- *                      FLAC__stream_encoder_init_*().
- */
-typedef void (*FLAC__StreamEncoderMetadataCallback)(const FLAC__StreamEncoder *encoder, const FLAC__StreamMetadata *metadata, void *client_data);
-
-/** Signature for the progress callback.
- *
- *  A function pointer matching this signature may be passed to
- *  FLAC__stream_encoder_init*_file() or FLAC__stream_encoder_init*_FILE().
- *  The supplied function will be called when the encoder has finished
- *  writing a frame.  The \c total_frames_estimate argument to the
- *  callback will be based on the value from
- *  FLAC__stream_encoder_set_total_samples_estimate().
- *
- * \note In general, FLAC__StreamEncoder functions which change the
- * state should not be called on the \a encoder while in the callback.
- *
- * \param  encoder          The encoder instance calling the callback.
- * \param  bytes_written    Bytes written so far.
- * \param  samples_written  Samples written so far.
- * \param  frames_written   Frames written so far.
- * \param  total_frames_estimate  The estimate of the total number of
- *                                frames to be written.
- * \param  client_data      The callee's client data set through
- *                          FLAC__stream_encoder_init_*().
- */
-typedef void (*FLAC__StreamEncoderProgressCallback)(const FLAC__StreamEncoder *encoder, FLAC__uint64 bytes_written, FLAC__uint64 samples_written, uint32_t frames_written, uint32_t total_frames_estimate, void *client_data);
-
-
-/***********************************************************************
- *
- * Class constructor/destructor
- *
- ***********************************************************************/
-
-/** Create a new stream encoder instance.  The instance is created with
- *  default settings; see the individual FLAC__stream_encoder_set_*()
- *  functions for each setting's default.
- *
- * \retval FLAC__StreamEncoder*
- *    \c NULL if there was an error allocating memory, else the new instance.
- */
-FLAC_API FLAC__StreamEncoder *FLAC__stream_encoder_new(void);
-
-/** Free an encoder instance.  Deletes the object pointed to by \a encoder.
- *
- * \param encoder  A pointer to an existing encoder.
- * \assert
- *    \code encoder != NULL \endcode
- */
-FLAC_API void FLAC__stream_encoder_delete(FLAC__StreamEncoder *encoder);
-
-
-/***********************************************************************
- *
- * Public class method prototypes
- *
- ***********************************************************************/
-
-/** Set the serial number for the FLAC stream to use in the Ogg container.
- *
- * \note
- * This does not need to be set for native FLAC encoding.
- *
- * \note
- * It is recommended to set a serial number explicitly as the default of '0'
- * may collide with other streams.
- *
- * \default \c 0
- * \param  encoder        An encoder instance to set.
- * \param  serial_number  See above.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__bool
- *    \c false if the encoder is already initialized, else \c true.
- */
-FLAC_API FLAC__bool FLAC__stream_encoder_set_ogg_serial_number(FLAC__StreamEncoder *encoder, long serial_number);
-
-/** Set the "verify" flag.  If \c true, the encoder will verify it's own
- *  encoded output by feeding it through an internal decoder and comparing
- *  the original signal against the decoded signal.  If a mismatch occurs,
- *  the process call will return \c false.  Note that this will slow the
- *  encoding process by the extra time required for decoding and comparison.
- *
- * \default \c false
- * \param  encoder  An encoder instance to set.
- * \param  value    Flag value (see above).
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__bool
- *    \c false if the encoder is already initialized, else \c true.
- */
-FLAC_API FLAC__bool FLAC__stream_encoder_set_verify(FLAC__StreamEncoder *encoder, FLAC__bool value);
-
-/** Set the <A HREF="../format.html#subset">Subset</A> flag.  If \c true,
- *  the encoder will comply with the Subset and will check the
- *  settings during FLAC__stream_encoder_init_*() to see if all settings
- *  comply.  If \c false, the settings may take advantage of the full
- *  range that the format allows.
- *
- *  Make sure you know what it entails before setting this to \c false.
- *
- * \default \c true
- * \param  encoder  An encoder instance to set.
- * \param  value    Flag value (see above).
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__bool
- *    \c false if the encoder is already initialized, else \c true.
- */
-FLAC_API FLAC__bool FLAC__stream_encoder_set_streamable_subset(FLAC__StreamEncoder *encoder, FLAC__bool value);
-
-/** Set the number of channels to be encoded.
- *
- * \default \c 2
- * \param  encoder  An encoder instance to set.
- * \param  value    See above.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__bool
- *    \c false if the encoder is already initialized, else \c true.
- */
-FLAC_API FLAC__bool FLAC__stream_encoder_set_channels(FLAC__StreamEncoder *encoder, uint32_t value);
-
-/** Set the sample resolution of the input to be encoded.
- *
- * \warning
- * Do not feed the encoder data that is wider than the value you
- * set here or you will generate an invalid stream.
- *
- * \default \c 16
- * \param  encoder  An encoder instance to set.
- * \param  value    See above.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__bool
- *    \c false if the encoder is already initialized, else \c true.
- */
-FLAC_API FLAC__bool FLAC__stream_encoder_set_bits_per_sample(FLAC__StreamEncoder *encoder, uint32_t value);
-
-/** Set the sample rate (in Hz) of the input to be encoded.
- *
- * \default \c 44100
- * \param  encoder  An encoder instance to set.
- * \param  value    See above.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__bool
- *    \c false if the encoder is already initialized, else \c true.
- */
-FLAC_API FLAC__bool FLAC__stream_encoder_set_sample_rate(FLAC__StreamEncoder *encoder, uint32_t value);
-
-/** Set the compression level
- *
- * The compression level is roughly proportional to the amount of effort
- * the encoder expends to compress the file.  A higher level usually
- * means more computation but higher compression.  The default level is
- * suitable for most applications.
- *
- * Currently the levels range from \c 0 (fastest, least compression) to
- * \c 8 (slowest, most compression).  A value larger than \c 8 will be
- * treated as \c 8.
- *
- * This function automatically calls the following other \c _set_
- * functions with appropriate values, so the client does not need to
- * unless it specifically wants to override them:
- * - FLAC__stream_encoder_set_do_mid_side_stereo()
- * - FLAC__stream_encoder_set_loose_mid_side_stereo()
- * - FLAC__stream_encoder_set_apodization()
- * - FLAC__stream_encoder_set_max_lpc_order()
- * - FLAC__stream_encoder_set_qlp_coeff_precision()
- * - FLAC__stream_encoder_set_do_qlp_coeff_prec_search()
- * - FLAC__stream_encoder_set_do_escape_coding()
- * - FLAC__stream_encoder_set_do_exhaustive_model_search()
- * - FLAC__stream_encoder_set_min_residual_partition_order()
- * - FLAC__stream_encoder_set_max_residual_partition_order()
- * - FLAC__stream_encoder_set_rice_parameter_search_dist()
- *
- * The actual values set for each level are:
- * <table>
- * <tr>
- *  <td><b>level</b></td>
- *  <td>do mid-side stereo</td>
- *  <td>loose mid-side stereo</td>
- *  <td>apodization</td>
- *  <td>max lpc order</td>
- *  <td>qlp coeff precision</td>
- *  <td>qlp coeff prec search</td>
- *  <td>escape coding</td>
- *  <td>exhaustive model search</td>
- *  <td>min residual partition order</td>
- *  <td>max residual partition order</td>
- *  <td>rice parameter search dist</td>
- * </tr>
- * <tr>  <td><b>0</b></td> <td>false</td> <td>false</td> <td>tukey(0.5)<td>                                     <td>0</td>  <td>0</td> <td>false</td> <td>false</td> <td>false</td> <td>0</td> <td>3</td> <td>0</td> </tr>
- * <tr>  <td><b>1</b></td> <td>true</td>  <td>true</td>  <td>tukey(0.5)<td>                                     <td>0</td>  <td>0</td> <td>false</td> <td>false</td> <td>false</td> <td>0</td> <td>3</td> <td>0</td> </tr>
- * <tr>  <td><b>2</b></td> <td>true</td>  <td>false</td> <td>tukey(0.5)<td>                                     <td>0</td>  <td>0</td> <td>false</td> <td>false</td> <td>false</td> <td>0</td> <td>3</td> <td>0</td> </tr>
- * <tr>  <td><b>3</b></td> <td>false</td> <td>false</td> <td>tukey(0.5)<td>                                     <td>6</td>  <td>0</td> <td>false</td> <td>false</td> <td>false</td> <td>0</td> <td>4</td> <td>0</td> </tr>
- * <tr>  <td><b>4</b></td> <td>true</td>  <td>true</td>  <td>tukey(0.5)<td>                                     <td>8</td>  <td>0</td> <td>false</td> <td>false</td> <td>false</td> <td>0</td> <td>4</td> <td>0</td> </tr>
- * <tr>  <td><b>5</b></td> <td>true</td>  <td>false</td> <td>tukey(0.5)<td>                                     <td>8</td>  <td>0</td> <td>false</td> <td>false</td> <td>false</td> <td>0</td> <td>5</td> <td>0</td> </tr>
- * <tr>  <td><b>6</b></td> <td>true</td>  <td>false</td> <td>tukey(0.5);partial_tukey(2)<td>                    <td>8</td>  <td>0</td> <td>false</td> <td>false</td> <td>false</td> <td>0</td> <td>6</td> <td>0</td> </tr>
- * <tr>  <td><b>7</b></td> <td>true</td>  <td>false</td> <td>tukey(0.5);partial_tukey(2)<td>                    <td>12</td> <td>0</td> <td>false</td> <td>false</td> <td>false</td> <td>0</td> <td>6</td> <td>0</td> </tr>
- * <tr>  <td><b>8</b></td> <td>true</td>  <td>false</td> <td>tukey(0.5);partial_tukey(2);punchout_tukey(3)</td> <td>12</td> <td>0</td> <td>false</td> <td>false</td> <td>false</td> <td>0</td> <td>6</td> <td>0</td> </tr>
- * </table>
- *
- * \default \c 5
- * \param  encoder  An encoder instance to set.
- * \param  value    See above.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__bool
- *    \c false if the encoder is already initialized, else \c true.
- */
-FLAC_API FLAC__bool FLAC__stream_encoder_set_compression_level(FLAC__StreamEncoder *encoder, uint32_t value);
-
-/** Set the blocksize to use while encoding.
- *
- * The number of samples to use per frame.  Use \c 0 to let the encoder
- * estimate a blocksize; this is usually best.
- *
- * \default \c 0
- * \param  encoder  An encoder instance to set.
- * \param  value    See above.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__bool
- *    \c false if the encoder is already initialized, else \c true.
- */
-FLAC_API FLAC__bool FLAC__stream_encoder_set_blocksize(FLAC__StreamEncoder *encoder, uint32_t value);
-
-/** Set to \c true to enable mid-side encoding on stereo input.  The
- *  number of channels must be 2 for this to have any effect.  Set to
- *  \c false to use only independent channel coding.
- *
- * \default \c true
- * \param  encoder  An encoder instance to set.
- * \param  value    Flag value (see above).
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__bool
- *    \c false if the encoder is already initialized, else \c true.
- */
-FLAC_API FLAC__bool FLAC__stream_encoder_set_do_mid_side_stereo(FLAC__StreamEncoder *encoder, FLAC__bool value);
-
-/** Set to \c true to enable adaptive switching between mid-side and
- *  left-right encoding on stereo input.  Set to \c false to use
- *  exhaustive searching.  Setting this to \c true requires
- *  FLAC__stream_encoder_set_do_mid_side_stereo() to also be set to
- *  \c true in order to have any effect.
- *
- * \default \c false
- * \param  encoder  An encoder instance to set.
- * \param  value    Flag value (see above).
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__bool
- *    \c false if the encoder is already initialized, else \c true.
- */
-FLAC_API FLAC__bool FLAC__stream_encoder_set_loose_mid_side_stereo(FLAC__StreamEncoder *encoder, FLAC__bool value);
-
-/** Sets the apodization function(s) the encoder will use when windowing
- *  audio data for LPC analysis.
- *
- * The \a specification is a plain ASCII string which specifies exactly
- * which functions to use.  There may be more than one (up to 32),
- * separated by \c ';' characters.  Some functions take one or more
- * comma-separated arguments in parentheses.
- *
- * The available functions are \c bartlett, \c bartlett_hann,
- * \c blackman, \c blackman_harris_4term_92db, \c connes, \c flattop,
- * \c gauss(STDDEV), \c hamming, \c hann, \c kaiser_bessel, \c nuttall,
- * \c rectangle, \c triangle, \c tukey(P), \c partial_tukey(n[/ov[/P]]),
- * \c punchout_tukey(n[/ov[/P]]), \c welch.
- *
- * For \c gauss(STDDEV), STDDEV specifies the standard deviation
- * (0<STDDEV<=0.5).
- *
- * For \c tukey(P), P specifies the fraction of the window that is
- * tapered (0<=P<=1).  P=0 corresponds to \c rectangle and P=1
- * corresponds to \c hann.
- *
- * Specifying \c partial_tukey or \c punchout_tukey works a little
- * different. These do not specify a single apodization function, but
- * a series of them with some overlap. partial_tukey specifies a series
- * of small windows (all treated separately) while punchout_tukey
- * specifies a series of windows that have a hole in them. In this way,
- * the predictor is constructed with only a part of the block, which
- * helps in case a block consists of dissimilar parts.
- *
- * The three parameters that can be specified for the functions are
- * n, ov and P. n is the number of functions to add, ov is the overlap
- * of the windows in case of partial_tukey and the overlap in the gaps
- * in case of punchout_tukey. P is the fraction of the window that is
- * tapered, like with a regular tukey window. The function can be
- * specified with only a number, a number and an overlap, or a number
- * an overlap and a P, for example, partial_tukey(3), partial_tukey(3/0.3)
- * and partial_tukey(3/0.3/0.5) are all valid. ov should be smaller than 1
- * and can be negative.
- *
- * Example specifications are \c "blackman" or
- * \c "hann;triangle;tukey(0.5);tukey(0.25);tukey(0.125)"
- *
- * Any function that is specified erroneously is silently dropped.  Up
- * to 32 functions are kept, the rest are dropped.  If the specification
- * is empty the encoder defaults to \c "tukey(0.5)".
- *
- * When more than one function is specified, then for every subframe the
- * encoder will try each of them separately and choose the window that
- * results in the smallest compressed subframe.
- *
- * Note that each function specified causes the encoder to occupy a
- * floating point array in which to store the window. Also note that the
- * values of P, STDDEV and ov are locale-specific, so if the comma
- * separator specified by the locale is a comma, a comma should be used.
- *
- * \default \c "tukey(0.5)"
- * \param  encoder        An encoder instance to set.
- * \param  specification  See above.
- * \assert
- *    \code encoder != NULL \endcode
- *    \code specification != NULL \endcode
- * \retval FLAC__bool
- *    \c false if the encoder is already initialized, else \c true.
- */
-FLAC_API FLAC__bool FLAC__stream_encoder_set_apodization(FLAC__StreamEncoder *encoder, const char *specification);
-
-/** Set the maximum LPC order, or \c 0 to use only the fixed predictors.
- *
- * \default \c 8
- * \param  encoder  An encoder instance to set.
- * \param  value    See above.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__bool
- *    \c false if the encoder is already initialized, else \c true.
- */
-FLAC_API FLAC__bool FLAC__stream_encoder_set_max_lpc_order(FLAC__StreamEncoder *encoder, uint32_t value);
-
-/** Set the precision, in bits, of the quantized linear predictor
- *  coefficients, or \c 0 to let the encoder select it based on the
- *  blocksize.
- *
- * \note
- * In the current implementation, qlp_coeff_precision + bits_per_sample must
- * be less than 32.
- *
- * \default \c 0
- * \param  encoder  An encoder instance to set.
- * \param  value    See above.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__bool
- *    \c false if the encoder is already initialized, else \c true.
- */
-FLAC_API FLAC__bool FLAC__stream_encoder_set_qlp_coeff_precision(FLAC__StreamEncoder *encoder, uint32_t value);
-
-/** Set to \c false to use only the specified quantized linear predictor
- *  coefficient precision, or \c true to search neighboring precision
- *  values and use the best one.
- *
- * \default \c false
- * \param  encoder  An encoder instance to set.
- * \param  value    See above.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__bool
- *    \c false if the encoder is already initialized, else \c true.
- */
-FLAC_API FLAC__bool FLAC__stream_encoder_set_do_qlp_coeff_prec_search(FLAC__StreamEncoder *encoder, FLAC__bool value);
-
-/** Deprecated.  Setting this value has no effect.
- *
- * \default \c false
- * \param  encoder  An encoder instance to set.
- * \param  value    See above.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__bool
- *    \c false if the encoder is already initialized, else \c true.
- */
-FLAC_API FLAC__bool FLAC__stream_encoder_set_do_escape_coding(FLAC__StreamEncoder *encoder, FLAC__bool value);
-
-/** Set to \c false to let the encoder estimate the best model order
- *  based on the residual signal energy, or \c true to force the
- *  encoder to evaluate all order models and select the best.
- *
- * \default \c false
- * \param  encoder  An encoder instance to set.
- * \param  value    See above.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__bool
- *    \c false if the encoder is already initialized, else \c true.
- */
-FLAC_API FLAC__bool FLAC__stream_encoder_set_do_exhaustive_model_search(FLAC__StreamEncoder *encoder, FLAC__bool value);
-
-/** Set the minimum partition order to search when coding the residual.
- *  This is used in tandem with
- *  FLAC__stream_encoder_set_max_residual_partition_order().
- *
- *  The partition order determines the context size in the residual.
- *  The context size will be approximately <tt>blocksize / (2 ^ order)</tt>.
- *
- *  Set both min and max values to \c 0 to force a single context,
- *  whose Rice parameter is based on the residual signal variance.
- *  Otherwise, set a min and max order, and the encoder will search
- *  all orders, using the mean of each context for its Rice parameter,
- *  and use the best.
- *
- * \default \c 0
- * \param  encoder  An encoder instance to set.
- * \param  value    See above.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__bool
- *    \c false if the encoder is already initialized, else \c true.
- */
-FLAC_API FLAC__bool FLAC__stream_encoder_set_min_residual_partition_order(FLAC__StreamEncoder *encoder, uint32_t value);
-
-/** Set the maximum partition order to search when coding the residual.
- *  This is used in tandem with
- *  FLAC__stream_encoder_set_min_residual_partition_order().
- *
- *  The partition order determines the context size in the residual.
- *  The context size will be approximately <tt>blocksize / (2 ^ order)</tt>.
- *
- *  Set both min and max values to \c 0 to force a single context,
- *  whose Rice parameter is based on the residual signal variance.
- *  Otherwise, set a min and max order, and the encoder will search
- *  all orders, using the mean of each context for its Rice parameter,
- *  and use the best.
- *
- * \default \c 5
- * \param  encoder  An encoder instance to set.
- * \param  value    See above.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__bool
- *    \c false if the encoder is already initialized, else \c true.
- */
-FLAC_API FLAC__bool FLAC__stream_encoder_set_max_residual_partition_order(FLAC__StreamEncoder *encoder, uint32_t value);
-
-/** Deprecated.  Setting this value has no effect.
- *
- * \default \c 0
- * \param  encoder  An encoder instance to set.
- * \param  value    See above.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__bool
- *    \c false if the encoder is already initialized, else \c true.
- */
-FLAC_API FLAC__bool FLAC__stream_encoder_set_rice_parameter_search_dist(FLAC__StreamEncoder *encoder, uint32_t value);
-
-/** Set an estimate of the total samples that will be encoded.
- *  This is merely an estimate and may be set to \c 0 if unknown.
- *  This value will be written to the STREAMINFO block before encoding,
- *  and can remove the need for the caller to rewrite the value later
- *  if the value is known before encoding.
- *
- * \default \c 0
- * \param  encoder  An encoder instance to set.
- * \param  value    See above.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__bool
- *    \c false if the encoder is already initialized, else \c true.
- */
-FLAC_API FLAC__bool FLAC__stream_encoder_set_total_samples_estimate(FLAC__StreamEncoder *encoder, FLAC__uint64 value);
-
-/** Set the metadata blocks to be emitted to the stream before encoding.
- *  A value of \c NULL, \c 0 implies no metadata; otherwise, supply an
- *  array of pointers to metadata blocks.  The array is non-const since
- *  the encoder may need to change the \a is_last flag inside them, and
- *  in some cases update seek point offsets.  Otherwise, the encoder will
- *  not modify or free the blocks.  It is up to the caller to free the
- *  metadata blocks after encoding finishes.
- *
- * \note
- * The encoder stores only copies of the pointers in the \a metadata array;
- * the metadata blocks themselves must survive at least until after
- * FLAC__stream_encoder_finish() returns.  Do not free the blocks until then.
- *
- * \note
- * The STREAMINFO block is always written and no STREAMINFO block may
- * occur in the supplied array.
- *
- * \note
- * By default the encoder does not create a SEEKTABLE.  If one is supplied
- * in the \a metadata array, but the client has specified that it does not
- * support seeking, then the SEEKTABLE will be written verbatim.  However
- * by itself this is not very useful as the client will not know the stream
- * offsets for the seekpoints ahead of time.  In order to get a proper
- * seektable the client must support seeking.  See next note.
- *
- * \note
- * SEEKTABLE blocks are handled specially.  Since you will not know
- * the values for the seek point stream offsets, you should pass in
- * a SEEKTABLE 'template', that is, a SEEKTABLE object with the
- * required sample numbers (or placeholder points), with \c 0 for the
- * \a frame_samples and \a stream_offset fields for each point.  If the
- * client has specified that it supports seeking by providing a seek
- * callback to FLAC__stream_encoder_init_stream() or both seek AND read
- * callback to FLAC__stream_encoder_init_ogg_stream() (or by using
- * FLAC__stream_encoder_init*_file() or FLAC__stream_encoder_init*_FILE()),
- * then while it is encoding the encoder will fill the stream offsets in
- * for you and when encoding is finished, it will seek back and write the
- * real values into the SEEKTABLE block in the stream.  There are helper
- * routines for manipulating seektable template blocks; see metadata.h:
- * FLAC__metadata_object_seektable_template_*().  If the client does
- * not support seeking, the SEEKTABLE will have inaccurate offsets which
- * will slow down or remove the ability to seek in the FLAC stream.
- *
- * \note
- * The encoder instance \b will modify the first \c SEEKTABLE block
- * as it transforms the template to a valid seektable while encoding,
- * but it is still up to the caller to free all metadata blocks after
- * encoding.
- *
- * \note
- * A VORBIS_COMMENT block may be supplied.  The vendor string in it
- * will be ignored.  libFLAC will use it's own vendor string. libFLAC
- * will not modify the passed-in VORBIS_COMMENT's vendor string, it
- * will simply write it's own into the stream.  If no VORBIS_COMMENT
- * block is present in the \a metadata array, libFLAC will write an
- * empty one, containing only the vendor string.
- *
- * \note The Ogg FLAC mapping requires that the VORBIS_COMMENT block be
- * the second metadata block of the stream.  The encoder already supplies
- * the STREAMINFO block automatically.  If \a metadata does not contain a
- * VORBIS_COMMENT block, the encoder will supply that too.  Otherwise, if
- * \a metadata does contain a VORBIS_COMMENT block and it is not the
- * first, the init function will reorder \a metadata by moving the
- * VORBIS_COMMENT block to the front; the relative ordering of the other
- * blocks will remain as they were.
- *
- * \note The Ogg FLAC mapping limits the number of metadata blocks per
- * stream to \c 65535.  If \a num_blocks exceeds this the function will
- * return \c false.
- *
- * \default \c NULL, 0
- * \param  encoder     An encoder instance to set.
- * \param  metadata    See above.
- * \param  num_blocks  See above.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__bool
- *    \c false if the encoder is already initialized, else \c true.
- *    \c false if the encoder is already initialized, or if
- *    \a num_blocks > 65535 if encoding to Ogg FLAC, else \c true.
- */
-FLAC_API FLAC__bool FLAC__stream_encoder_set_metadata(FLAC__StreamEncoder *encoder, FLAC__StreamMetadata **metadata, uint32_t num_blocks);
-
-/** Get the current encoder state.
- *
- * \param  encoder  An encoder instance to query.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__StreamEncoderState
- *    The current encoder state.
- */
-FLAC_API FLAC__StreamEncoderState FLAC__stream_encoder_get_state(const FLAC__StreamEncoder *encoder);
-
-/** Get the state of the verify stream decoder.
- *  Useful when the stream encoder state is
- *  \c FLAC__STREAM_ENCODER_VERIFY_DECODER_ERROR.
- *
- * \param  encoder  An encoder instance to query.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__StreamDecoderState
- *    The verify stream decoder state.
- */
-FLAC_API FLAC__StreamDecoderState FLAC__stream_encoder_get_verify_decoder_state(const FLAC__StreamEncoder *encoder);
-
-/** Get the current encoder state as a C string.
- *  This version automatically resolves
- *  \c FLAC__STREAM_ENCODER_VERIFY_DECODER_ERROR by getting the
- *  verify decoder's state.
- *
- * \param  encoder  A encoder instance to query.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval const char *
- *    The encoder state as a C string.  Do not modify the contents.
- */
-FLAC_API const char *FLAC__stream_encoder_get_resolved_state_string(const FLAC__StreamEncoder *encoder);
-
-/** Get relevant values about the nature of a verify decoder error.
- *  Useful when the stream encoder state is
- *  \c FLAC__STREAM_ENCODER_VERIFY_DECODER_ERROR.  The arguments should
- *  be addresses in which the stats will be returned, or NULL if value
- *  is not desired.
- *
- * \param  encoder  An encoder instance to query.
- * \param  absolute_sample  The absolute sample number of the mismatch.
- * \param  frame_number  The number of the frame in which the mismatch occurred.
- * \param  channel       The channel in which the mismatch occurred.
- * \param  sample        The number of the sample (relative to the frame) in
- *                       which the mismatch occurred.
- * \param  expected      The expected value for the sample in question.
- * \param  got           The actual value returned by the decoder.
- * \assert
- *    \code encoder != NULL \endcode
- */
-FLAC_API void FLAC__stream_encoder_get_verify_decoder_error_stats(const FLAC__StreamEncoder *encoder, FLAC__uint64 *absolute_sample, uint32_t *frame_number, uint32_t *channel, uint32_t *sample, FLAC__int32 *expected, FLAC__int32 *got);
-
-/** Get the "verify" flag.
- *
- * \param  encoder  An encoder instance to query.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__bool
- *    See FLAC__stream_encoder_set_verify().
- */
-FLAC_API FLAC__bool FLAC__stream_encoder_get_verify(const FLAC__StreamEncoder *encoder);
-
-/** Get the <A HREF="../format.html#subset>Subset</A> flag.
- *
- * \param  encoder  An encoder instance to query.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__bool
- *    See FLAC__stream_encoder_set_streamable_subset().
- */
-FLAC_API FLAC__bool FLAC__stream_encoder_get_streamable_subset(const FLAC__StreamEncoder *encoder);
-
-/** Get the number of input channels being processed.
- *
- * \param  encoder  An encoder instance to query.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval uint32_t
- *    See FLAC__stream_encoder_set_channels().
- */
-FLAC_API uint32_t FLAC__stream_encoder_get_channels(const FLAC__StreamEncoder *encoder);
-
-/** Get the input sample resolution setting.
- *
- * \param  encoder  An encoder instance to query.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval uint32_t
- *    See FLAC__stream_encoder_set_bits_per_sample().
- */
-FLAC_API uint32_t FLAC__stream_encoder_get_bits_per_sample(const FLAC__StreamEncoder *encoder);
-
-/** Get the input sample rate setting.
- *
- * \param  encoder  An encoder instance to query.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval uint32_t
- *    See FLAC__stream_encoder_set_sample_rate().
- */
-FLAC_API uint32_t FLAC__stream_encoder_get_sample_rate(const FLAC__StreamEncoder *encoder);
-
-/** Get the blocksize setting.
- *
- * \param  encoder  An encoder instance to query.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval uint32_t
- *    See FLAC__stream_encoder_set_blocksize().
- */
-FLAC_API uint32_t FLAC__stream_encoder_get_blocksize(const FLAC__StreamEncoder *encoder);
-
-/** Get the "mid/side stereo coding" flag.
- *
- * \param  encoder  An encoder instance to query.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__bool
- *    See FLAC__stream_encoder_get_do_mid_side_stereo().
- */
-FLAC_API FLAC__bool FLAC__stream_encoder_get_do_mid_side_stereo(const FLAC__StreamEncoder *encoder);
-
-/** Get the "adaptive mid/side switching" flag.
- *
- * \param  encoder  An encoder instance to query.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__bool
- *    See FLAC__stream_encoder_set_loose_mid_side_stereo().
- */
-FLAC_API FLAC__bool FLAC__stream_encoder_get_loose_mid_side_stereo(const FLAC__StreamEncoder *encoder);
-
-/** Get the maximum LPC order setting.
- *
- * \param  encoder  An encoder instance to query.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval uint32_t
- *    See FLAC__stream_encoder_set_max_lpc_order().
- */
-FLAC_API uint32_t FLAC__stream_encoder_get_max_lpc_order(const FLAC__StreamEncoder *encoder);
-
-/** Get the quantized linear predictor coefficient precision setting.
- *
- * \param  encoder  An encoder instance to query.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval uint32_t
- *    See FLAC__stream_encoder_set_qlp_coeff_precision().
- */
-FLAC_API uint32_t FLAC__stream_encoder_get_qlp_coeff_precision(const FLAC__StreamEncoder *encoder);
-
-/** Get the qlp coefficient precision search flag.
- *
- * \param  encoder  An encoder instance to query.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__bool
- *    See FLAC__stream_encoder_set_do_qlp_coeff_prec_search().
- */
-FLAC_API FLAC__bool FLAC__stream_encoder_get_do_qlp_coeff_prec_search(const FLAC__StreamEncoder *encoder);
-
-/** Get the "escape coding" flag.
- *
- * \param  encoder  An encoder instance to query.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__bool
- *    See FLAC__stream_encoder_set_do_escape_coding().
- */
-FLAC_API FLAC__bool FLAC__stream_encoder_get_do_escape_coding(const FLAC__StreamEncoder *encoder);
-
-/** Get the exhaustive model search flag.
- *
- * \param  encoder  An encoder instance to query.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__bool
- *    See FLAC__stream_encoder_set_do_exhaustive_model_search().
- */
-FLAC_API FLAC__bool FLAC__stream_encoder_get_do_exhaustive_model_search(const FLAC__StreamEncoder *encoder);
-
-/** Get the minimum residual partition order setting.
- *
- * \param  encoder  An encoder instance to query.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval uint32_t
- *    See FLAC__stream_encoder_set_min_residual_partition_order().
- */
-FLAC_API uint32_t FLAC__stream_encoder_get_min_residual_partition_order(const FLAC__StreamEncoder *encoder);
-
-/** Get maximum residual partition order setting.
- *
- * \param  encoder  An encoder instance to query.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval uint32_t
- *    See FLAC__stream_encoder_set_max_residual_partition_order().
- */
-FLAC_API uint32_t FLAC__stream_encoder_get_max_residual_partition_order(const FLAC__StreamEncoder *encoder);
-
-/** Get the Rice parameter search distance setting.
- *
- * \param  encoder  An encoder instance to query.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval uint32_t
- *    See FLAC__stream_encoder_set_rice_parameter_search_dist().
- */
-FLAC_API uint32_t FLAC__stream_encoder_get_rice_parameter_search_dist(const FLAC__StreamEncoder *encoder);
-
-/** Get the previously set estimate of the total samples to be encoded.
- *  The encoder merely mimics back the value given to
- *  FLAC__stream_encoder_set_total_samples_estimate() since it has no
- *  other way of knowing how many samples the client will encode.
- *
- * \param  encoder  An encoder instance to set.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__uint64
- *    See FLAC__stream_encoder_get_total_samples_estimate().
- */
-FLAC_API FLAC__uint64 FLAC__stream_encoder_get_total_samples_estimate(const FLAC__StreamEncoder *encoder);
-
-/** Initialize the encoder instance to encode native FLAC streams.
- *
- *  This flavor of initialization sets up the encoder to encode to a
- *  native FLAC stream. I/O is performed via callbacks to the client.
- *  For encoding to a plain file via filename or open \c FILE*,
- *  FLAC__stream_encoder_init_file() and FLAC__stream_encoder_init_FILE()
- *  provide a simpler interface.
- *
- *  This function should be called after FLAC__stream_encoder_new() and
- *  FLAC__stream_encoder_set_*() but before FLAC__stream_encoder_process()
- *  or FLAC__stream_encoder_process_interleaved().
- *  initialization succeeded.
- *
- *  The call to FLAC__stream_encoder_init_stream() currently will also
- *  immediately call the write callback several times, once with the \c fLaC
- *  signature, and once for each encoded metadata block.
- *
- * \param  encoder            An uninitialized encoder instance.
- * \param  write_callback     See FLAC__StreamEncoderWriteCallback.  This
- *                            pointer must not be \c NULL.
- * \param  seek_callback      See FLAC__StreamEncoderSeekCallback.  This
- *                            pointer may be \c NULL if seeking is not
- *                            supported.  The encoder uses seeking to go back
- *                            and write some some stream statistics to the
- *                            STREAMINFO block; this is recommended but not
- *                            necessary to create a valid FLAC stream.  If
- *                            \a seek_callback is not \c NULL then a
- *                            \a tell_callback must also be supplied.
- *                            Alternatively, a dummy seek callback that just
- *                            returns \c FLAC__STREAM_ENCODER_SEEK_STATUS_UNSUPPORTED
- *                            may also be supplied, all though this is slightly
- *                            less efficient for the encoder.
- * \param  tell_callback      See FLAC__StreamEncoderTellCallback.  This
- *                            pointer may be \c NULL if seeking is not
- *                            supported.  If \a seek_callback is \c NULL then
- *                            this argument will be ignored.  If
- *                            \a seek_callback is not \c NULL then a
- *                            \a tell_callback must also be supplied.
- *                            Alternatively, a dummy tell callback that just
- *                            returns \c FLAC__STREAM_ENCODER_TELL_STATUS_UNSUPPORTED
- *                            may also be supplied, all though this is slightly
- *                            less efficient for the encoder.
- * \param  metadata_callback  See FLAC__StreamEncoderMetadataCallback.  This
- *                            pointer may be \c NULL if the callback is not
- *                            desired.  If the client provides a seek callback,
- *                            this function is not necessary as the encoder
- *                            will automatically seek back and update the
- *                            STREAMINFO block.  It may also be \c NULL if the
- *                            client does not support seeking, since it will
- *                            have no way of going back to update the
- *                            STREAMINFO.  However the client can still supply
- *                            a callback if it would like to know the details
- *                            from the STREAMINFO.
- * \param  client_data        This value will be supplied to callbacks in their
- *                            \a client_data argument.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__StreamEncoderInitStatus
- *    \c FLAC__STREAM_ENCODER_INIT_STATUS_OK if initialization was successful;
- *    see FLAC__StreamEncoderInitStatus for the meanings of other return values.
- */
-FLAC_API FLAC__StreamEncoderInitStatus FLAC__stream_encoder_init_stream(FLAC__StreamEncoder *encoder, FLAC__StreamEncoderWriteCallback write_callback, FLAC__StreamEncoderSeekCallback seek_callback, FLAC__StreamEncoderTellCallback tell_callback, FLAC__StreamEncoderMetadataCallback metadata_callback, void *client_data);
-
-/** Initialize the encoder instance to encode Ogg FLAC streams.
- *
- *  This flavor of initialization sets up the encoder to encode to a FLAC
- *  stream in an Ogg container.  I/O is performed via callbacks to the
- *  client.  For encoding to a plain file via filename or open \c FILE*,
- *  FLAC__stream_encoder_init_ogg_file() and FLAC__stream_encoder_init_ogg_FILE()
- *  provide a simpler interface.
- *
- *  This function should be called after FLAC__stream_encoder_new() and
- *  FLAC__stream_encoder_set_*() but before FLAC__stream_encoder_process()
- *  or FLAC__stream_encoder_process_interleaved().
- *  initialization succeeded.
- *
- *  The call to FLAC__stream_encoder_init_ogg_stream() currently will also
- *  immediately call the write callback several times to write the metadata
- *  packets.
- *
- * \param  encoder            An uninitialized encoder instance.
- * \param  read_callback      See FLAC__StreamEncoderReadCallback.  This
- *                            pointer must not be \c NULL if \a seek_callback
- *                            is non-NULL since they are both needed to be
- *                            able to write data back to the Ogg FLAC stream
- *                            in the post-encode phase.
- * \param  write_callback     See FLAC__StreamEncoderWriteCallback.  This
- *                            pointer must not be \c NULL.
- * \param  seek_callback      See FLAC__StreamEncoderSeekCallback.  This
- *                            pointer may be \c NULL if seeking is not
- *                            supported.  The encoder uses seeking to go back
- *                            and write some some stream statistics to the
- *                            STREAMINFO block; this is recommended but not
- *                            necessary to create a valid FLAC stream.  If
- *                            \a seek_callback is not \c NULL then a
- *                            \a tell_callback must also be supplied.
- *                            Alternatively, a dummy seek callback that just
- *                            returns \c FLAC__STREAM_ENCODER_SEEK_STATUS_UNSUPPORTED
- *                            may also be supplied, all though this is slightly
- *                            less efficient for the encoder.
- * \param  tell_callback      See FLAC__StreamEncoderTellCallback.  This
- *                            pointer may be \c NULL if seeking is not
- *                            supported.  If \a seek_callback is \c NULL then
- *                            this argument will be ignored.  If
- *                            \a seek_callback is not \c NULL then a
- *                            \a tell_callback must also be supplied.
- *                            Alternatively, a dummy tell callback that just
- *                            returns \c FLAC__STREAM_ENCODER_TELL_STATUS_UNSUPPORTED
- *                            may also be supplied, all though this is slightly
- *                            less efficient for the encoder.
- * \param  metadata_callback  See FLAC__StreamEncoderMetadataCallback.  This
- *                            pointer may be \c NULL if the callback is not
- *                            desired.  If the client provides a seek callback,
- *                            this function is not necessary as the encoder
- *                            will automatically seek back and update the
- *                            STREAMINFO block.  It may also be \c NULL if the
- *                            client does not support seeking, since it will
- *                            have no way of going back to update the
- *                            STREAMINFO.  However the client can still supply
- *                            a callback if it would like to know the details
- *                            from the STREAMINFO.
- * \param  client_data        This value will be supplied to callbacks in their
- *                            \a client_data argument.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__StreamEncoderInitStatus
- *    \c FLAC__STREAM_ENCODER_INIT_STATUS_OK if initialization was successful;
- *    see FLAC__StreamEncoderInitStatus for the meanings of other return values.
- */
-FLAC_API FLAC__StreamEncoderInitStatus FLAC__stream_encoder_init_ogg_stream(FLAC__StreamEncoder *encoder, FLAC__StreamEncoderReadCallback read_callback, FLAC__StreamEncoderWriteCallback write_callback, FLAC__StreamEncoderSeekCallback seek_callback, FLAC__StreamEncoderTellCallback tell_callback, FLAC__StreamEncoderMetadataCallback metadata_callback, void *client_data);
-
-/** Initialize the encoder instance to encode native FLAC files.
- *
- *  This flavor of initialization sets up the encoder to encode to a
- *  plain native FLAC file.  For non-stdio streams, you must use
- *  FLAC__stream_encoder_init_stream() and provide callbacks for the I/O.
- *
- *  This function should be called after FLAC__stream_encoder_new() and
- *  FLAC__stream_encoder_set_*() but before FLAC__stream_encoder_process()
- *  or FLAC__stream_encoder_process_interleaved().
- *  initialization succeeded.
- *
- * \param  encoder            An uninitialized encoder instance.
- * \param  file               An open file.  The file should have been opened
- *                            with mode \c "w+b" and rewound.  The file
- *                            becomes owned by the encoder and should not be
- *                            manipulated by the client while encoding.
- *                            Unless \a file is \c stdout, it will be closed
- *                            when FLAC__stream_encoder_finish() is called.
- *                            Note however that a proper SEEKTABLE cannot be
- *                            created when encoding to \c stdout since it is
- *                            not seekable.
- * \param  progress_callback  See FLAC__StreamEncoderProgressCallback.  This
- *                            pointer may be \c NULL if the callback is not
- *                            desired.
- * \param  client_data        This value will be supplied to callbacks in their
- *                            \a client_data argument.
- * \assert
- *    \code encoder != NULL \endcode
- *    \code file != NULL \endcode
- * \retval FLAC__StreamEncoderInitStatus
- *    \c FLAC__STREAM_ENCODER_INIT_STATUS_OK if initialization was successful;
- *    see FLAC__StreamEncoderInitStatus for the meanings of other return values.
- */
-FLAC_API FLAC__StreamEncoderInitStatus FLAC__stream_encoder_init_FILE(FLAC__StreamEncoder *encoder, FILE *file, FLAC__StreamEncoderProgressCallback progress_callback, void *client_data);
-
-/** Initialize the encoder instance to encode Ogg FLAC files.
- *
- *  This flavor of initialization sets up the encoder to encode to a
- *  plain Ogg FLAC file.  For non-stdio streams, you must use
- *  FLAC__stream_encoder_init_ogg_stream() and provide callbacks for the I/O.
- *
- *  This function should be called after FLAC__stream_encoder_new() and
- *  FLAC__stream_encoder_set_*() but before FLAC__stream_encoder_process()
- *  or FLAC__stream_encoder_process_interleaved().
- *  initialization succeeded.
- *
- * \param  encoder            An uninitialized encoder instance.
- * \param  file               An open file.  The file should have been opened
- *                            with mode \c "w+b" and rewound.  The file
- *                            becomes owned by the encoder and should not be
- *                            manipulated by the client while encoding.
- *                            Unless \a file is \c stdout, it will be closed
- *                            when FLAC__stream_encoder_finish() is called.
- *                            Note however that a proper SEEKTABLE cannot be
- *                            created when encoding to \c stdout since it is
- *                            not seekable.
- * \param  progress_callback  See FLAC__StreamEncoderProgressCallback.  This
- *                            pointer may be \c NULL if the callback is not
- *                            desired.
- * \param  client_data        This value will be supplied to callbacks in their
- *                            \a client_data argument.
- * \assert
- *    \code encoder != NULL \endcode
- *    \code file != NULL \endcode
- * \retval FLAC__StreamEncoderInitStatus
- *    \c FLAC__STREAM_ENCODER_INIT_STATUS_OK if initialization was successful;
- *    see FLAC__StreamEncoderInitStatus for the meanings of other return values.
- */
-FLAC_API FLAC__StreamEncoderInitStatus FLAC__stream_encoder_init_ogg_FILE(FLAC__StreamEncoder *encoder, FILE *file, FLAC__StreamEncoderProgressCallback progress_callback, void *client_data);
-
-/** Initialize the encoder instance to encode native FLAC files.
- *
- *  This flavor of initialization sets up the encoder to encode to a plain
- *  FLAC file.  If POSIX fopen() semantics are not sufficient (for example,
- *  with Unicode filenames on Windows), you must use
- *  FLAC__stream_encoder_init_FILE(), or FLAC__stream_encoder_init_stream()
- *  and provide callbacks for the I/O.
- *
- *  This function should be called after FLAC__stream_encoder_new() and
- *  FLAC__stream_encoder_set_*() but before FLAC__stream_encoder_process()
- *  or FLAC__stream_encoder_process_interleaved().
- *  initialization succeeded.
- *
- * \param  encoder            An uninitialized encoder instance.
- * \param  filename           The name of the file to encode to.  The file will
- *                            be opened with fopen().  Use \c NULL to encode to
- *                            \c stdout.  Note however that a proper SEEKTABLE
- *                            cannot be created when encoding to \c stdout since
- *                            it is not seekable.
- * \param  progress_callback  See FLAC__StreamEncoderProgressCallback.  This
- *                            pointer may be \c NULL if the callback is not
- *                            desired.
- * \param  client_data        This value will be supplied to callbacks in their
- *                            \a client_data argument.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__StreamEncoderInitStatus
- *    \c FLAC__STREAM_ENCODER_INIT_STATUS_OK if initialization was successful;
- *    see FLAC__StreamEncoderInitStatus for the meanings of other return values.
- */
-FLAC_API FLAC__StreamEncoderInitStatus FLAC__stream_encoder_init_file(FLAC__StreamEncoder *encoder, const char *filename, FLAC__StreamEncoderProgressCallback progress_callback, void *client_data);
-
-/** Initialize the encoder instance to encode Ogg FLAC files.
- *
- *  This flavor of initialization sets up the encoder to encode to a plain
- *  Ogg FLAC file.  If POSIX fopen() semantics are not sufficient (for example,
- *  with Unicode filenames on Windows), you must use
- *  FLAC__stream_encoder_init_ogg_FILE(), or FLAC__stream_encoder_init_ogg_stream()
- *  and provide callbacks for the I/O.
- *
- *  This function should be called after FLAC__stream_encoder_new() and
- *  FLAC__stream_encoder_set_*() but before FLAC__stream_encoder_process()
- *  or FLAC__stream_encoder_process_interleaved().
- *  initialization succeeded.
- *
- * \param  encoder            An uninitialized encoder instance.
- * \param  filename           The name of the file to encode to.  The file will
- *                            be opened with fopen().  Use \c NULL to encode to
- *                            \c stdout.  Note however that a proper SEEKTABLE
- *                            cannot be created when encoding to \c stdout since
- *                            it is not seekable.
- * \param  progress_callback  See FLAC__StreamEncoderProgressCallback.  This
- *                            pointer may be \c NULL if the callback is not
- *                            desired.
- * \param  client_data        This value will be supplied to callbacks in their
- *                            \a client_data argument.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__StreamEncoderInitStatus
- *    \c FLAC__STREAM_ENCODER_INIT_STATUS_OK if initialization was successful;
- *    see FLAC__StreamEncoderInitStatus for the meanings of other return values.
- */
-FLAC_API FLAC__StreamEncoderInitStatus FLAC__stream_encoder_init_ogg_file(FLAC__StreamEncoder *encoder, const char *filename, FLAC__StreamEncoderProgressCallback progress_callback, void *client_data);
-
-/** Finish the encoding process.
- *  Flushes the encoding buffer, releases resources, resets the encoder
- *  settings to their defaults, and returns the encoder state to
- *  FLAC__STREAM_ENCODER_UNINITIALIZED.  Note that this can generate
- *  one or more write callbacks before returning, and will generate
- *  a metadata callback.
- *
- *  Note that in the course of processing the last frame, errors can
- *  occur, so the caller should be sure to check the return value to
- *  ensure the file was encoded properly.
- *
- *  In the event of a prematurely-terminated encode, it is not strictly
- *  necessary to call this immediately before FLAC__stream_encoder_delete()
- *  but it is good practice to match every FLAC__stream_encoder_init_*()
- *  with a FLAC__stream_encoder_finish().
- *
- * \param  encoder  An uninitialized encoder instance.
- * \assert
- *    \code encoder != NULL \endcode
- * \retval FLAC__bool
- *    \c false if an error occurred processing the last frame; or if verify
- *    mode is set (see FLAC__stream_encoder_set_verify()), there was a
- *    verify mismatch; else \c true.  If \c false, caller should check the
- *    state with FLAC__stream_encoder_get_state() for more information
- *    about the error.
- */
-FLAC_API FLAC__bool FLAC__stream_encoder_finish(FLAC__StreamEncoder *encoder);
-
-/** Submit data for encoding.
- *  This version allows you to supply the input data via an array of
- *  pointers, each pointer pointing to an array of \a samples samples
- *  representing one channel.  The samples need not be block-aligned,
- *  but each channel should have the same number of samples.  Each sample
- *  should be a signed integer, right-justified to the resolution set by
- *  FLAC__stream_encoder_set_bits_per_sample().  For example, if the
- *  resolution is 16 bits per sample, the samples should all be in the
- *  range [-32768,32767].
- *
- *  For applications where channel order is important, channels must
- *  follow the order as described in the
- *  <A HREF="../format.html#frame_header">frame header</A>.
- *
- * \param  encoder  An initialized encoder instance in the OK state.
- * \param  buffer   An array of pointers to each channel's signal.
- * \param  samples  The number of samples in one channel.
- * \assert
- *    \code encoder != NULL \endcode
- *    \code FLAC__stream_encoder_get_state(encoder) == FLAC__STREAM_ENCODER_OK \endcode
- * \retval FLAC__bool
- *    \c true if successful, else \c false; in this case, check the
- *    encoder state with FLAC__stream_encoder_get_state() to see what
- *    went wrong.
- */
-FLAC_API FLAC__bool FLAC__stream_encoder_process(FLAC__StreamEncoder *encoder, const FLAC__int32 * const buffer[], uint32_t samples);
-
-/** Submit data for encoding.
- *  This version allows you to supply the input data where the channels
- *  are interleaved into a single array (i.e. channel0_sample0,
- *  channel1_sample0, ... , channelN_sample0, channel0_sample1, ...).
- *  The samples need not be block-aligned but they must be
- *  sample-aligned, i.e. the first value should be channel0_sample0
- *  and the last value channelN_sampleM.  Each sample should be a signed
- *  integer, right-justified to the resolution set by
- *  FLAC__stream_encoder_set_bits_per_sample().  For example, if the
- *  resolution is 16 bits per sample, the samples should all be in the
- *  range [-32768,32767].
- *
- *  For applications where channel order is important, channels must
- *  follow the order as described in the
- *  <A HREF="../format.html#frame_header">frame header</A>.
- *
- * \param  encoder  An initialized encoder instance in the OK state.
- * \param  buffer   An array of channel-interleaved data (see above).
- * \param  samples  The number of samples in one channel, the same as for
- *                  FLAC__stream_encoder_process().  For example, if
- *                  encoding two channels, \c 1000 \a samples corresponds
- *                  to a \a buffer of 2000 values.
- * \assert
- *    \code encoder != NULL \endcode
- *    \code FLAC__stream_encoder_get_state(encoder) == FLAC__STREAM_ENCODER_OK \endcode
- * \retval FLAC__bool
- *    \c true if successful, else \c false; in this case, check the
- *    encoder state with FLAC__stream_encoder_get_state() to see what
- *    went wrong.
- */
-FLAC_API FLAC__bool FLAC__stream_encoder_process_interleaved(FLAC__StreamEncoder *encoder, const FLAC__int32 buffer[], uint32_t samples);
-
-/* \} */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif