@recallai/desktop-sdk 2024.10.16-2ccd74388f861ddaabfe3e5e1f2faa9b201fe4ae → 2024.10.16-3b0c73d6f0c10a75f6d5227075453636da5ff91e

package/desktop_sdk_macos.framework/Versions/A/Frameworks/GStreamer.framework/Versions/1.0/include/srtp2/srtp.h

@@ -1,1747 +0,0 @@
-/*
- * srtp.h
- *
- * interface to libsrtp
- *
- * David A. McGrew
- * Cisco Systems, Inc.
- */
-/*
- *
- * Copyright (c) 2001-2017, Cisco Systems, Inc.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *   Redistributions of source code must retain the above copyright
- *   notice, this list of conditions and the following disclaimer.
- *
- *   Redistributions in binary form must reproduce the above
- *   copyright notice, this list of conditions and the following
- *   disclaimer in the documentation and/or other materials provided
- *   with the distribution.
- *
- *   Neither the name of the Cisco Systems, Inc. nor the names of its
- *   contributors may be used to endorse or promote products derived
- *   from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-
-#ifndef SRTP_SRTP_H
-#define SRTP_SRTP_H
-
-#include <stdint.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * @defgroup SRTP Secure RTP
- *
- * @brief libSRTP provides functions for protecting RTP and RTCP.  See
- * Section @ref Overview for an introduction to the use of the library.
- *
- * @{
- */
-
-/*
- * SRTP_MASTER_KEY_LEN is the nominal master key length supported by libSRTP
- */
-
-#define SRTP_MASTER_KEY_LEN 30
-
-/*
- * SRTP_MAX_KEY_LEN is the maximum key length supported by libSRTP
- */
-#define SRTP_MAX_KEY_LEN 64
-
-/*
- * SRTP_MAX_TAG_LEN is the maximum tag length supported by libSRTP
- */
-
-#define SRTP_MAX_TAG_LEN 16
-
-/**
- * SRTP_MAX_MKI_LEN is the maximum size the MKI could be which is
- * 128 bytes
- */
-#define SRTP_MAX_MKI_LEN 128
-
-/**
- * SRTP_MAX_TRAILER_LEN is the maximum length of the SRTP trailer
- * (authentication tag and MKI) supported by libSRTP.  This value is
- * the maximum number of octets that will be added to an RTP packet by
- * srtp_protect().
- *
- * @brief the maximum number of octets added by srtp_protect().
- */
-#define SRTP_MAX_TRAILER_LEN (SRTP_MAX_TAG_LEN + SRTP_MAX_MKI_LEN)
-
-/**
- * SRTP_MAX_NUM_MASTER_KEYS is the maximum number of Master keys for
- * MKI supported by libSRTP.
- *
- */
-#define SRTP_MAX_NUM_MASTER_KEYS 16
-
-#define SRTP_SALT_LEN 14
-
-/*
- * SRTP_AEAD_SALT_LEN is the length of the SALT values used with
- * GCM mode.  GCM mode requires an IV.  The SALT value is used
- * as part of the IV formation logic applied to each RTP packet.
- */
-#define SRTP_AEAD_SALT_LEN 12
-
-#define SRTP_AES_128_KEY_LEN 16
-#define SRTP_AES_192_KEY_LEN 24
-#define SRTP_AES_256_KEY_LEN 32
-
-#define SRTP_AES_ICM_128_KEY_LEN_WSALT (SRTP_SALT_LEN + SRTP_AES_128_KEY_LEN)
-#define SRTP_AES_ICM_192_KEY_LEN_WSALT (SRTP_SALT_LEN + SRTP_AES_192_KEY_LEN)
-#define SRTP_AES_ICM_256_KEY_LEN_WSALT (SRTP_SALT_LEN + SRTP_AES_256_KEY_LEN)
-
-#define SRTP_AES_GCM_128_KEY_LEN_WSALT                                         \
-    (SRTP_AEAD_SALT_LEN + SRTP_AES_128_KEY_LEN)
-#define SRTP_AES_GCM_192_KEY_LEN_WSALT                                         \
-    (SRTP_AEAD_SALT_LEN + SRTP_AES_192_KEY_LEN)
-#define SRTP_AES_GCM_256_KEY_LEN_WSALT                                         \
-    (SRTP_AEAD_SALT_LEN + SRTP_AES_256_KEY_LEN)
-
-/**
- *  @brief A srtp_cipher_type_id_t is an identifier for a particular cipher
- *  type.
- *
- *  A srtp_cipher_type_id_t is an integer that represents a particular
- *  cipher type, e.g. the Advanced Encryption Standard (AES).  A
- *  SRTP_NULL_CIPHER is available; this cipher leaves the data unchanged,
- *  and can be selected to indicate that no encryption is to take
- *  place.
- *
- *  @ingroup Ciphers
- */
-typedef uint32_t srtp_cipher_type_id_t;
-
-/**
- *  @brief An srtp_auth_type_id_t is an identifier for a particular
- * authentication
- *   function.
- *
- *  An srtp_auth_type_id_t is an integer that represents a particular
- *  authentication function type, e.g. HMAC-SHA1.  A SRTP_NULL_AUTH is
- *  available; this authentication function performs no computation,
- *  and can be selected to indicate that no authentication is to take
- *  place.
- *
- *  @ingroup Authentication
- */
-typedef uint32_t srtp_auth_type_id_t;
-
-/**
- * @brief srtp_err_status_t defines error codes.
- *
- * The enumeration srtp_err_status_t defines error codes.  Note that the
- * value of srtp_err_status_ok is equal to zero, which can simplify error
- * checking somewhat.
- *
- */
-typedef enum {
-    srtp_err_status_ok = 0,             /**< nothing to report               */
-    srtp_err_status_fail = 1,           /**< unspecified failure             */
-    srtp_err_status_bad_param = 2,      /**< unsupported parameter           */
-    srtp_err_status_alloc_fail = 3,     /**< couldn't allocate memory        */
-    srtp_err_status_dealloc_fail = 4,   /**< couldn't deallocate properly    */
-    srtp_err_status_init_fail = 5,      /**< couldn't initialize             */
-    srtp_err_status_terminus = 6,       /**< can't process as much data as   */
-                                        /**< requested                       */
-    srtp_err_status_auth_fail = 7,      /**< authentication failure          */
-    srtp_err_status_cipher_fail = 8,    /**< cipher failure                  */
-    srtp_err_status_replay_fail = 9,    /**< replay check failed (bad index) */
-    srtp_err_status_replay_old = 10,    /**< replay check failed (index too  */
-                                        /**< old)                            */
-    srtp_err_status_algo_fail = 11,     /**< algorithm failed test routine   */
-    srtp_err_status_no_such_op = 12,    /**< unsupported operation           */
-    srtp_err_status_no_ctx = 13,        /**< no appropriate context found    */
-    srtp_err_status_cant_check = 14,    /**< unable to perform desired       */
-                                        /**< validation                      */
-    srtp_err_status_key_expired = 15,   /**< can't use key any more          */
-    srtp_err_status_socket_err = 16,    /**< error in use of socket          */
-    srtp_err_status_signal_err = 17,    /**< error in use POSIX signals      */
-    srtp_err_status_nonce_bad = 18,     /**< nonce check failed              */
-    srtp_err_status_read_fail = 19,     /**< couldn't read data              */
-    srtp_err_status_write_fail = 20,    /**< couldn't write data             */
-    srtp_err_status_parse_err = 21,     /**< error parsing data              */
-    srtp_err_status_encode_err = 22,    /**< error encoding data             */
-    srtp_err_status_semaphore_err = 23, /**< error while using semaphores    */
-    srtp_err_status_pfkey_err = 24,     /**< error while using pfkey         */
-    srtp_err_status_bad_mki = 25,       /**< error MKI present in packet is  */
-                                        /**< invalid                         */
-    srtp_err_status_pkt_idx_old = 26,   /**< packet index is too old to      */
-                                        /**< consider                        */
-    srtp_err_status_pkt_idx_adv = 27    /**< packet index advanced, reset    */
-                                        /**< needed                          */
-} srtp_err_status_t;
-
-typedef struct srtp_ctx_t_ srtp_ctx_t;
-
-/**
- * @brief srtp_sec_serv_t describes a set of security services.
- *
- * A srtp_sec_serv_t enumeration is used to describe the particular
- * security services that will be applied by a particular crypto
- * policy (or other mechanism).
- */
-typedef enum {
-    sec_serv_none = 0,         /**< no services                        */
-    sec_serv_conf = 1,         /**< confidentiality                    */
-    sec_serv_auth = 2,         /**< authentication                     */
-    sec_serv_conf_and_auth = 3 /**< confidentiality and authentication */
-} srtp_sec_serv_t;
-
-/**
- * @brief srtp_crypto_policy_t describes a particular crypto policy that
- * can be applied to an SRTP stream.
- *
- * A srtp_crypto_policy_t describes a particular cryptographic policy that
- * can be applied to an SRTP or SRTCP stream.  An SRTP session policy
- * consists of a list of these policies, one for each SRTP stream
- * in the session.
- */
-typedef struct srtp_crypto_policy_t {
-    srtp_cipher_type_id_t cipher_type; /**< An integer representing          */
-                                       /**< the type of cipher.              */
-    int cipher_key_len;                /**< The length of the cipher key     */
-                                       /**< in octets.                       */
-    srtp_auth_type_id_t auth_type;     /**< An integer representing the      */
-                                       /**< authentication function.         */
-    int auth_key_len;                  /**< The length of the authentication */
-                                       /**< function key in octets.          */
-    int auth_tag_len;                  /**< The length of the authentication */
-                                       /**< tag in octets.                   */
-    srtp_sec_serv_t sec_serv;          /**< The flag indicating the security */
-                                       /**< services to be applied.          */
-} srtp_crypto_policy_t;
-
-/**
- * @brief srtp_ssrc_type_t describes the type of an SSRC.
- *
- * An srtp_ssrc_type_t enumeration is used to indicate a type of SSRC.  See
- * @ref srtp_policy_t for more information.
- */
-typedef enum {
-    ssrc_undefined = 0,   /**< Indicates an undefined SSRC type.    */
-    ssrc_specific = 1,    /**< Indicates a specific SSRC value      */
-    ssrc_any_inbound = 2, /**< Indicates any inbound SSRC value     */
-                          /**< (i.e. a value that is used in the    */
-                          /**< function srtp_unprotect())           */
-    ssrc_any_outbound = 3 /**< Indicates any outbound SSRC value    */
-                          /**< (i.e. a value that is used in the    */
-                          /**< function srtp_protect())             */
-} srtp_ssrc_type_t;
-
-/**
- * @brief An srtp_ssrc_t represents a particular SSRC value, or a `wildcard'
- * SSRC.
- *
- * An srtp_ssrc_t represents a particular SSRC value (if its type is
- * ssrc_specific), or a wildcard SSRC value that will match all
- * outbound SSRCs (if its type is ssrc_any_outbound) or all inbound
- * SSRCs (if its type is ssrc_any_inbound).
- */
-typedef struct {
-    srtp_ssrc_type_t type; /**< The type of this particular SSRC */
-    unsigned int value;    /**< The value of this SSRC, if it is not a */
-                           /**< wildcard */
-} srtp_ssrc_t;
-
-/**
- * @brief srtp_master_key_t represents a master key.  There will
- * be a Master Key Index and the Master Key associated with the
- * Master Key Index.  Need to also keep track of the Master Key
- * Index Size to correctly read it from a packet.
- */
-typedef struct srtp_master_key_t {
-    unsigned char *key;
-    unsigned char *mki_id;
-    unsigned int mki_size;
-} srtp_master_key_t;
-
-/**
- * @brief represents the policy for an SRTP session.
- *
- * A single srtp_policy_t struct represents the policy for a single
- * SRTP stream, and a linked list of these elements represents the
- * policy for an entire SRTP session.  Each element contains the SRTP
- * and SRTCP crypto policies for that stream, a pointer to the SRTP
- * master key for that stream, the SSRC describing that stream, or a
- * flag indicating a `wildcard' SSRC value, and a `next' field that
- * holds a pointer to the next element in the list of policy elements,
- * or NULL if it is the last element.
- *
- * The wildcard value SSRC_ANY_INBOUND matches any SSRC from an
- * inbound stream that for which there is no explicit SSRC entry in
- * another policy element.  Similarly, the value SSRC_ANY_OUTBOUND
- * will matches any SSRC from an outbound stream that does not appear
- * in another policy element.  Note that wildcard SSRCs &b cannot be
- * used to match both inbound and outbound traffic.  This restriction
- * is intentional, and it allows libSRTP to ensure that no security
- * lapses result from accidental re-use of SSRC values during key
- * sharing.
- *
- * @warning The final element of the list @b must have its `next' pointer
- *          set to NULL.
- */
-
-typedef struct srtp_policy_t {
-    srtp_ssrc_t ssrc;              /**< The SSRC value of stream, or the    */
-                                   /**< flags SSRC_ANY_INBOUND or           */
-                                   /**< SSRC_ANY_OUTBOUND if key sharing    */
-                                   /**< is used for this policy element.    */
-    srtp_crypto_policy_t rtp;      /**< SRTP crypto policy.                 */
-    srtp_crypto_policy_t rtcp;     /**< SRTCP crypto policy.                */
-    unsigned char *key;            /**< Pointer to the SRTP master key for  */
-                                   /**< this stream.                        */
-    srtp_master_key_t **keys;      /** Array of Master Key structures       */
-    unsigned long num_master_keys; /** Number of master keys                */
-    void *deprecated_ekt;          /**< DEPRECATED: pointer to the EKT      */
-                                   /**< policy structure for this stream    */
-    unsigned long window_size;     /**< The window size to use for replay   */
-                                   /**< protection.                         */
-    int allow_repeat_tx;           /**< Whether retransmissions of          */
-                                   /**< packets with the same sequence      */
-                                   /**< number are allowed.                 */
-                                   /**< (Note that such repeated            */
-                                   /**< transmissions must have the same    */
-                                   /**< RTP payload, or a severe security   */
-                                   /**< weakness is introduced!)            */
-    int *enc_xtn_hdr;              /**< List of header ids to encrypt.      */
-    int enc_xtn_hdr_count;         /**< Number of entries in list of header */
-                                   /**<  ids.                               */
-    struct srtp_policy_t *next;    /**< Pointer to next stream policy.      */
-} srtp_policy_t;
-
-/**
- * @brief An srtp_t points to an SRTP session structure.
- *
- * The typedef srtp_t is a pointer to a structure that represents
- * an SRTP session.  This datatype is intentionally opaque in
- * order to separate the interface from the implementation.
- *
- * An SRTP session consists of all of the traffic sent to the RTP and
- * RTCP destination transport addresses, using the RTP/SAVP (Secure
- * Audio/Video Profile).  A session can be viewed as a set of SRTP
- * streams, each of which originates with a different participant.
- */
-typedef srtp_ctx_t *srtp_t;
-
-/**
- * @brief srtp_init() initializes the srtp library.
- *
- * @warning This function @b must be called before any other srtp
- * functions.
- */
-srtp_err_status_t srtp_init(void);
-
-/**
- * @brief srtp_shutdown() de-initializes the srtp library.
- *
- * @warning No srtp functions may be called after calling this function.
- */
-srtp_err_status_t srtp_shutdown(void);
-
-/**
- * @brief srtp_protect() is the Secure RTP sender-side packet processing
- * function.
- *
- * The function call srtp_protect(ctx, rtp_hdr, len_ptr) applies SRTP
- * protection to the RTP packet rtp_hdr (which has length *len_ptr) using
- * the SRTP context ctx.  If srtp_err_status_ok is returned, then rtp_hdr
- * points to the resulting SRTP packet and *len_ptr is the number of
- * octets in that packet; otherwise, no assumptions should be made
- * about the value of either data elements.
- *
- * The sequence numbers of the RTP packets presented to this function
- * need not be consecutive, but they @b must be out of order by less
- * than 2^15 = 32,768 packets.
- *
- * @warning This function assumes that it can write the authentication
- * tag into the location in memory immediately following the RTP
- * packet, and assumes that the RTP packet is aligned on a 32-bit
- * boundary.
- *
- * @warning This function assumes that it can write SRTP_MAX_TRAILER_LEN
- * into the location in memory immediately following the RTP packet.
- * Callers MUST ensure that this much writable memory is available in
- * the buffer that holds the RTP packet.
- *
- * @param ctx is the SRTP context to use in processing the packet.
- *
- * @param rtp_hdr is a pointer to the RTP packet (before the call); after
- * the function returns, it points to the srtp packet.
- *
- * @param len_ptr is a pointer to the length in octets of the complete
- * RTP packet (header and body) before the function call, and of the
- * complete SRTP packet after the call, if srtp_err_status_ok was returned.
- * Otherwise, the value of the data to which it points is undefined.
- *
- * @return
- *    - srtp_err_status_ok            no problems
- *    - srtp_err_status_replay_fail   rtp sequence number was non-increasing
- *    - @e other                 failure in cryptographic mechanisms
- */
-srtp_err_status_t srtp_protect(srtp_t ctx, void *rtp_hdr, int *len_ptr);
-
-/**
- * @brief srtp_protect_mki() is the Secure RTP sender-side packet processing
- * function that can utilize MKI.
- *
- * The function call srtp_protect(ctx, rtp_hdr, len_ptr) applies SRTP
- * protection to the RTP packet rtp_hdr (which has length *len_ptr) using
- * the SRTP context ctx.  If srtp_err_status_ok is returned, then rtp_hdr
- * points to the resulting SRTP packet and *len_ptr is the number of
- * octets in that packet; otherwise, no assumptions should be made
- * about the value of either data elements.
- *
- * The sequence numbers of the RTP packets presented to this function
- * need not be consecutive, but they @b must be out of order by less
- * than 2^15 = 32,768 packets.
- *
- * @warning This function assumes that it can write the authentication
- * tag into the location in memory immediately following the RTP
- * packet, and assumes that the RTP packet is aligned on a 32-bit
- * boundary.
- *
- * @warning This function assumes that it can write SRTP_MAX_TRAILER_LEN
- * into the location in memory immediately following the RTP packet.
- * Callers MUST ensure that this much writable memory is available in
- * the buffer that holds the RTP packet.
- *
- * @param ctx is the SRTP context to use in processing the packet.
- *
- * @param rtp_hdr is a pointer to the RTP packet (before the call); after
- * the function returns, it points to the srtp packet.
- *
- * @param pkt_octet_len is a pointer to the length in octets of the complete
- * RTP packet (header and body) before the function call, and of the
- * complete SRTP packet after the call, if srtp_err_status_ok was returned.
- * Otherwise, the value of the data to which it points is undefined.
- *
- * @param use_mki is a boolean to tell the system if mki is being used.  If
- * set to false then will use the first set of session keys.  If set to true
- * will
- * use the session keys identified by the mki_index
- *
- * @param mki_index integer value specifying which set of session keys should be
- * used if use_mki is set to true.
- *
- * @return
- *    - srtp_err_status_ok            no problems
- *    - srtp_err_status_replay_fail   rtp sequence number was non-increasing
- *    - @e other                 failure in cryptographic mechanisms
- */
-srtp_err_status_t srtp_protect_mki(srtp_ctx_t *ctx,
-                                   void *rtp_hdr,
-                                   int *pkt_octet_len,
-                                   unsigned int use_mki,
-                                   unsigned int mki_index);
-
-/**
- * @brief srtp_unprotect() is the Secure RTP receiver-side packet
- * processing function.
- *
- * The function call srtp_unprotect(ctx, srtp_hdr, len_ptr) verifies
- * the Secure RTP protection of the SRTP packet pointed to by srtp_hdr
- * (which has length *len_ptr), using the SRTP context ctx.  If
- * srtp_err_status_ok is returned, then srtp_hdr points to the resulting
- * RTP packet and *len_ptr is the number of octets in that packet;
- * otherwise, no assumptions should be made about the value of either
- * data elements.
- *
- * The sequence numbers of the RTP packets presented to this function
- * need not be consecutive, but they @b must be out of order by less
- * than 2^15 = 32,768 packets.
- *
- * @warning This function assumes that the SRTP packet is aligned on a
- * 32-bit boundary.
- *
- * @param ctx is the SRTP session which applies to the particular packet.
- *
- * @param srtp_hdr is a pointer to the header of the SRTP packet
- * (before the call).  after the function returns, it points to the
- * rtp packet if srtp_err_status_ok was returned; otherwise, the value of
- * the data to which it points is undefined.
- *
- * @param len_ptr is a pointer to the length in octets of the complete
- * srtp packet (header and body) before the function call, and of the
- * complete rtp packet after the call, if srtp_err_status_ok was returned.
- * Otherwise, the value of the data to which it points is undefined.
- *
- * @return
- *    - srtp_err_status_ok          if the RTP packet is valid.
- *    - srtp_err_status_auth_fail   if the SRTP packet failed the message
- *                                  authentication check.
- *    - srtp_err_status_replay_fail if the SRTP packet is a replay (e.g. packet
- *                                  has already been processed and accepted).
- *    - [other]  if there has been an error in the cryptographic mechanisms.
- *
- */
-srtp_err_status_t srtp_unprotect(srtp_t ctx, void *srtp_hdr, int *len_ptr);
-
-/**
- * @brief srtp_unprotect_mki() is the Secure RTP receiver-side packet
- * processing function that checks for MKI.
- *
- * The function call srtp_unprotect(ctx, srtp_hdr, len_ptr) verifies
- * the Secure RTP protection of the SRTP packet pointed to by srtp_hdr
- * (which has length *len_ptr), using the SRTP context ctx.  If
- * srtp_err_status_ok is returned, then srtp_hdr points to the resulting
- * RTP packet and *len_ptr is the number of octets in that packet;
- * otherwise, no assumptions should be made about the value of either
- * data elements.
- *
- * The sequence numbers of the RTP packets presented to this function
- * need not be consecutive, but they @b must be out of order by less
- * than 2^15 = 32,768 packets.
- *
- * @warning This function assumes that the SRTP packet is aligned on a
- * 32-bit boundary.
- *
- * @param ctx is the SRTP session which applies to the particular packet.
- *
- * @param srtp_hdr is a pointer to the header of the SRTP packet
- * (before the call).  after the function returns, it points to the
- * rtp packet if srtp_err_status_ok was returned; otherwise, the value of
- * the data to which it points is undefined.
- *
- * @param len_ptr is a pointer to the length in octets of the complete
- * srtp packet (header and body) before the function call, and of the
- * complete rtp packet after the call, if srtp_err_status_ok was returned.
- * Otherwise, the value of the data to which it points is undefined.
- *
- * @param use_mki is a boolean to tell the system if mki is being used.  If
- * set to false then will use the first set of session keys.  If set to true
- * will
- * use the session keys identified by the mki_index
- *
- * @return
- *    - srtp_err_status_ok          if the RTP packet is valid.
- *    - srtp_err_status_auth_fail   if the SRTP packet failed the message
- *                                  authentication check.
- *    - srtp_err_status_replay_fail if the SRTP packet is a replay (e.g. packet
- *                                  has already been processed and accepted).
- *    - srtp_err_status_bad_mki if the MKI in the packet is not a known MKI id
- *    - [other]  if there has been an error in the cryptographic mechanisms.
- *
- */
-srtp_err_status_t srtp_unprotect_mki(srtp_t ctx,
-                                     void *srtp_hdr,
-                                     int *len_ptr,
-                                     unsigned int use_mki);
-
-/**
- * @brief srtp_create() allocates and initializes an SRTP session.
-
- * The function call srtp_create(session, policy) allocates and
- * initializes an SRTP session context, applying the given policy.
- *
- * @param session is a pointer to the SRTP session to which the policy is
- * to be added.
- *
- * @param policy is the srtp_policy_t struct that describes the policy
- * for the session.  The struct may be a single element, or it may be
- * the head of a list, in which case each element of the list is
- * processed.  It may also be NULL, in which case streams should be added
- * later using srtp_add_stream().  The final element of the list @b must
- * have its `next' field set to NULL.
- *
- * @return
- *    - srtp_err_status_ok           if creation succeeded.
- *    - srtp_err_status_alloc_fail   if allocation failed.
- *    - srtp_err_status_init_fail    if initialization failed.
- */
-srtp_err_status_t srtp_create(srtp_t *session, const srtp_policy_t *policy);
-
-/**
- * @brief srtp_add_stream() allocates and initializes an SRTP stream
- * within a given SRTP session.
- *
- * The function call srtp_add_stream(session, policy) allocates and
- * initializes a new SRTP stream within a given, previously created
- * session, applying the policy given as the other argument to that
- * stream.
- *
- * @return values:
- *    - srtp_err_status_ok           if stream creation succeeded.
- *    - srtp_err_status_alloc_fail   if stream allocation failed
- *    - srtp_err_status_init_fail    if stream initialization failed.
- */
-srtp_err_status_t srtp_add_stream(srtp_t session, const srtp_policy_t *policy);
-
-/**
- * @brief srtp_remove_stream() deallocates an SRTP stream.
- *
- * The function call srtp_remove_stream(session, ssrc) removes
- * the SRTP stream with the SSRC value ssrc from the SRTP session
- * context given by the argument session.
- *
- * @param session is the SRTP session from which the stream
- *        will be removed.
- *
- * @param ssrc is the SSRC value of the stream to be removed
- *             in network byte order.
- *
- * @warning Wildcard SSRC values cannot be removed from a
- *          session.
- *
- * @return
- *    - srtp_err_status_ok     if the stream deallocation succeeded.
- *    - [other]           otherwise.
- *
- */
-srtp_err_status_t srtp_remove_stream(srtp_t session, unsigned int ssrc);
-
-/**
- * @brief srtp_update() updates all streams in the session.
- *
- * The function call srtp_update(session, policy) updates
- * all the streams in the session applying the given policy
- * and key. The existing ROC value of all streams will be
- * preserved.
- *
- * @param session is the SRTP session that contains the streams
- *        to be updated.
- *
- * @param policy is the srtp_policy_t struct that describes the policy
- * for the session.  The struct may be a single element, or it may be
- * the head of a list, in which case each element of the list is
- * processed. The final element of the list @b must
- * have its `next' field set to NULL.
- *
- * @return
- *    - srtp_err_status_ok           if stream creation succeed.
- *    - srtp_err_status_alloc_fail   if stream allocation failed
- *    - srtp_err_status_init_fail    if stream initialization failed.
- *    - [other]                 otherwise.
- *
- */
-srtp_err_status_t srtp_update(srtp_t session, const srtp_policy_t *policy);
-
-/**
- * @brief srtp_update_stream() updates a SRTP stream.
- *
- * The function call srtp_update_stream(session, policy) updates
- * the stream(s) in the session that match applying the given
- * policy and key. The existing ROC value of all stream(s) will
- * be preserved.
- *
- * @param session is the SRTP session that contains the streams
- *        to be updated.
- *
- * @param policy is the srtp_policy_t struct that describes the policy
- * for the session.
- *
- * @return
- *    - srtp_err_status_ok           if stream creation succeeded.
- *    - srtp_err_status_alloc_fail   if stream allocation failed
- *    - srtp_err_status_init_fail    if stream initialization failed.
- *    - [other]                      otherwise.
- *
- */
-srtp_err_status_t srtp_update_stream(srtp_t session,
-                                     const srtp_policy_t *policy);
-
-/**
- * @brief srtp_crypto_policy_set_rtp_default() sets a crypto policy
- * structure to the SRTP default policy for RTP protection.
- *
- * @param p is a pointer to the policy structure to be set
- *
- * The function call srtp_crypto_policy_set_rtp_default(&p) sets the
- * srtp_crypto_policy_t at location p to the SRTP default policy for RTP
- * protection, as defined in the specification.  This function is a
- * convenience that helps to avoid dealing directly with the policy
- * data structure.  You are encouraged to initialize policy elements
- * with this function call.  Doing so may allow your code to be
- * forward compatible with later versions of libSRTP that include more
- * elements in the srtp_crypto_policy_t datatype.
- *
- * @return void.
- *
- */
-void srtp_crypto_policy_set_rtp_default(srtp_crypto_policy_t *p);
-
-/**
- * @brief srtp_crypto_policy_set_rtcp_default() sets a crypto policy
- * structure to the SRTP default policy for RTCP protection.
- *
- * @param p is a pointer to the policy structure to be set
- *
- * The function call srtp_crypto_policy_set_rtcp_default(&p) sets the
- * srtp_crypto_policy_t at location p to the SRTP default policy for RTCP
- * protection, as defined in the specification.  This function is a
- * convenience that helps to avoid dealing directly with the policy
- * data structure.  You are encouraged to initialize policy elements
- * with this function call.  Doing so may allow your code to be
- * forward compatible with later versions of libSRTP that include more
- * elements in the srtp_crypto_policy_t datatype.
- *
- * @return void.
- *
- */
-void srtp_crypto_policy_set_rtcp_default(srtp_crypto_policy_t *p);
-
-/**
- * @brief srtp_crypto_policy_set_aes_cm_128_hmac_sha1_80() sets a crypto
- * policy structure to the SRTP default policy for RTP protection.
- *
- * @param p is a pointer to the policy structure to be set
- *
- * The function srtp_crypto_policy_set_aes_cm_128_hmac_sha1_80() is a
- * synonym for srtp_crypto_policy_set_rtp_default().  It conforms to the
- * naming convention used in RFC 4568 (SDP Security Descriptions for
- * Media Streams).
- *
- * @return void.
- *
- */
-#define srtp_crypto_policy_set_aes_cm_128_hmac_sha1_80(p)                      \
-    srtp_crypto_policy_set_rtp_default(p)
-
-/**
- * @brief srtp_crypto_policy_set_aes_cm_128_hmac_sha1_32() sets a crypto
- * policy structure to a short-authentication tag policy
- *
- * @param p is a pointer to the policy structure to be set
- *
- * The function call srtp_crypto_policy_set_aes_cm_128_hmac_sha1_32(&p)
- * sets the srtp_crypto_policy_t at location p to use policy
- * AES_CM_128_HMAC_SHA1_32 as defined in RFC 4568.
- * This policy uses AES-128
- * Counter Mode encryption and HMAC-SHA1 authentication, with an
- * authentication tag that is only 32 bits long.  This length is
- * considered adequate only for protecting audio and video media that
- * use a stateless playback function.  See Section 7.5 of RFC 3711
- * (http://www.ietf.org/rfc/rfc3711.txt).
- *
- * This function is a convenience that helps to avoid dealing directly
- * with the policy data structure.  You are encouraged to initialize
- * policy elements with this function call.  Doing so may allow your
- * code to be forward compatible with later versions of libSRTP that
- * include more elements in the srtp_crypto_policy_t datatype.
- *
- * @warning This crypto policy is intended for use in SRTP, but not in
- * SRTCP.  It is recommended that a policy that uses longer
- * authentication tags be used for SRTCP.  See Section 7.5 of RFC 3711
- * (http://www.ietf.org/rfc/rfc3711.txt).
- *
- * @return void.
- *
- */
-void srtp_crypto_policy_set_aes_cm_128_hmac_sha1_32(srtp_crypto_policy_t *p);
-
-/**
- * @brief srtp_crypto_policy_set_aes_cm_128_null_auth() sets a crypto
- * policy structure to an encryption-only policy
- *
- * @param p is a pointer to the policy structure to be set
- *
- * The function call srtp_crypto_policy_set_aes_cm_128_null_auth(&p) sets
- * the srtp_crypto_policy_t at location p to use the SRTP default cipher
- * (AES-128 Counter Mode), but to use no authentication method.  This
- * policy is NOT RECOMMENDED unless it is unavoidable; see Section 7.5
- * of RFC 3711 (http://www.ietf.org/rfc/rfc3711.txt).
- *
- * This function is a convenience that helps to avoid dealing directly
- * with the policy data structure.  You are encouraged to initialize
- * policy elements with this function call.  Doing so may allow your
- * code to be forward compatible with later versions of libSRTP that
- * include more elements in the srtp_crypto_policy_t datatype.
- *
- * @warning This policy is NOT RECOMMENDED for SRTP unless it is
- * unavoidable, and it is NOT RECOMMENDED at all for SRTCP; see
- * Section 7.5 of RFC 3711 (http://www.ietf.org/rfc/rfc3711.txt).
- *
- * @return void.
- *
- */
-void srtp_crypto_policy_set_aes_cm_128_null_auth(srtp_crypto_policy_t *p);
-
-/**
- * @brief srtp_crypto_policy_set_null_cipher_hmac_sha1_80() sets a crypto
- * policy structure to an authentication-only policy
- *
- * @param p is a pointer to the policy structure to be set
- *
- * The function call srtp_crypto_policy_set_null_cipher_hmac_sha1_80(&p)
- * sets the srtp_crypto_policy_t at location p to use HMAC-SHA1 with an 80
- * bit authentication tag to provide message authentication, but to
- * use no encryption.  This policy is NOT RECOMMENDED for SRTP unless
- * there is a requirement to forgo encryption.
- *
- * This function is a convenience that helps to avoid dealing directly
- * with the policy data structure.  You are encouraged to initialize
- * policy elements with this function call.  Doing so may allow your
- * code to be forward compatible with later versions of libSRTP that
- * include more elements in the srtp_crypto_policy_t datatype.
- *
- * @warning This policy is NOT RECOMMENDED for SRTP unless there is a
- * requirement to forgo encryption.
- *
- * @return void.
- *
- */
-void srtp_crypto_policy_set_null_cipher_hmac_sha1_80(srtp_crypto_policy_t *p);
-
-/**
- * @brief srtp_crypto_policy_set_null_cipher_hmac_null() sets a crypto
- * policy structure to use no encryption or authentication.
- *
- * @param p is a pointer to the policy structure to be set
- *
- * The function call srtp_crypto_policy_set_null_cipher_hmac_null(&p)
- * sets the srtp_crypto_policy_t at location p to use no encryption and
- * no authentication.  This policy should only be used for testing and
- * troubleshooting.
- *
- * This function is a convenience that helps to avoid dealing directly
- * with the policy data structure.  You are encouraged to initialize
- * policy elements with this function call.  Doing so may allow your
- * code to be forward compatible with later versions of libSRTP that
- * include more elements in the srtp_crypto_policy_t datatype.
- *
- * @warning This policy is NOT RECOMMENDED for SRTP unless there is a
- * requirement to forgo encryption and authentication.
- *
- * @return void.
- *
- */
-void srtp_crypto_policy_set_null_cipher_hmac_null(srtp_crypto_policy_t *p);
-
-/**
- * @brief srtp_crypto_policy_set_aes_cm_256_hmac_sha1_80() sets a crypto
- * policy structure to a encryption and authentication policy using AES-256
- * for RTP protection.
- *
- * @param p is a pointer to the policy structure to be set
- *
- * The function call srtp_crypto_policy_set_aes_cm_256_hmac_sha1_80(&p)
- * sets the srtp_crypto_policy_t at location p to use policy
- * AES_CM_256_HMAC_SHA1_80 as defined in RFC 6188.  This policy uses AES-256
- * Counter Mode encryption and HMAC-SHA1 authentication, with an 80 bit
- * authentication tag.
- *
- * This function is a convenience that helps to avoid dealing directly
- * with the policy data structure.  You are encouraged to initialize
- * policy elements with this function call.  Doing so may allow your
- * code to be forward compatible with later versions of libSRTP that
- * include more elements in the srtp_crypto_policy_t datatype.
- *
- * @return void.
- *
- */
-void srtp_crypto_policy_set_aes_cm_256_hmac_sha1_80(srtp_crypto_policy_t *p);
-
-/**
- * @brief srtp_crypto_policy_set_aes_cm_256_hmac_sha1_32() sets a crypto
- * policy structure to a short-authentication tag policy using AES-256
- * encryption.
- *
- * @param p is a pointer to the policy structure to be set
- *
- * The function call srtp_crypto_policy_set_aes_cm_256_hmac_sha1_32(&p)
- * sets the srtp_crypto_policy_t at location p to use policy
- * AES_CM_256_HMAC_SHA1_32 as defined in RFC 6188.  This policy uses AES-256
- * Counter Mode encryption and HMAC-SHA1 authentication, with an
- * authentication tag that is only 32 bits long.  This length is
- * considered adequate only for protecting audio and video media that
- * use a stateless playback function.  See Section 7.5 of RFC 3711
- * (http://www.ietf.org/rfc/rfc3711.txt).
- *
- * This function is a convenience that helps to avoid dealing directly
- * with the policy data structure.  You are encouraged to initialize
- * policy elements with this function call.  Doing so may allow your
- * code to be forward compatible with later versions of libSRTP that
- * include more elements in the srtp_crypto_policy_t datatype.
- *
- * @warning This crypto policy is intended for use in SRTP, but not in
- * SRTCP.  It is recommended that a policy that uses longer
- * authentication tags be used for SRTCP.  See Section 7.5 of RFC 3711
- * (http://www.ietf.org/rfc/rfc3711.txt).
- *
- * @return void.
- *
- */
-void srtp_crypto_policy_set_aes_cm_256_hmac_sha1_32(srtp_crypto_policy_t *p);
-
-/**
- * @brief srtp_crypto_policy_set_aes_cm_256_null_auth() sets a crypto
- * policy structure to an encryption-only policy
- *
- * @param p is a pointer to the policy structure to be set
- *
- * The function call srtp_crypto_policy_set_aes_cm_256_null_auth(&p) sets
- * the srtp_crypto_policy_t at location p to use the SRTP default cipher
- * (AES-256 Counter Mode), but to use no authentication method.  This
- * policy is NOT RECOMMENDED unless it is unavoidable; see Section 7.5
- * of RFC 3711 (http://www.ietf.org/rfc/rfc3711.txt).
- *
- * This function is a convenience that helps to avoid dealing directly
- * with the policy data structure.  You are encouraged to initialize
- * policy elements with this function call.  Doing so may allow your
- * code to be forward compatible with later versions of libSRTP that
- * include more elements in the srtp_crypto_policy_t datatype.
- *
- * @warning This policy is NOT RECOMMENDED for SRTP unless it is
- * unavoidable, and it is NOT RECOMMENDED at all for SRTCP; see
- * Section 7.5 of RFC 3711 (http://www.ietf.org/rfc/rfc3711.txt).
- *
- * @return void.
- *
- */
-void srtp_crypto_policy_set_aes_cm_256_null_auth(srtp_crypto_policy_t *p);
-
-/**
- * @brief srtp_crypto_policy_set_aes_cm_192_hmac_sha1_80() sets a crypto
- * policy structure to a encryption and authentication policy using AES-192
- * for RTP protection.
- *
- * @param p is a pointer to the policy structure to be set
- *
- * The function call srtp_crypto_policy_set_aes_cm_192_hmac_sha1_80(&p)
- * sets the srtp_crypto_policy_t at location p to use policy
- * AES_CM_192_HMAC_SHA1_80 as defined in RFC 6188.  This policy uses AES-192
- * Counter Mode encryption and HMAC-SHA1 authentication, with an 80 bit
- * authentication tag.
- *
- * This function is a convenience that helps to avoid dealing directly
- * with the policy data structure.  You are encouraged to initialize
- * policy elements with this function call.  Doing so may allow your
- * code to be forward compatible with later versions of libSRTP that
- * include more elements in the srtp_crypto_policy_t datatype.
- *
- * @return void.
- *
- */
-void srtp_crypto_policy_set_aes_cm_192_hmac_sha1_80(srtp_crypto_policy_t *p);
-
-/**
- * @brief srtp_crypto_policy_set_aes_cm_192_hmac_sha1_32() sets a crypto
- * policy structure to a short-authentication tag policy using AES-192
- * encryption.
- *
- * @param p is a pointer to the policy structure to be set
- *
- * The function call srtp_crypto_policy_set_aes_cm_192_hmac_sha1_32(&p)
- * sets the srtp_crypto_policy_t at location p to use policy
- * AES_CM_192_HMAC_SHA1_32 as defined in RFC 6188.  This policy uses AES-192
- * Counter Mode encryption and HMAC-SHA1 authentication, with an
- * authentication tag that is only 32 bits long.  This length is
- * considered adequate only for protecting audio and video media that
- * use a stateless playback function.  See Section 7.5 of RFC 3711
- * (http://www.ietf.org/rfc/rfc3711.txt).
- *
- * This function is a convenience that helps to avoid dealing directly
- * with the policy data structure.  You are encouraged to initialize
- * policy elements with this function call.  Doing so may allow your
- * code to be forward compatible with later versions of libSRTP that
- * include more elements in the srtp_crypto_policy_t datatype.
- *
- * @warning This crypto policy is intended for use in SRTP, but not in
- * SRTCP.  It is recommended that a policy that uses longer
- * authentication tags be used for SRTCP.  See Section 7.5 of RFC 3711
- * (http://www.ietf.org/rfc/rfc3711.txt).
- *
- * @return void.
- *
- */
-void srtp_crypto_policy_set_aes_cm_192_hmac_sha1_32(srtp_crypto_policy_t *p);
-
-/**
- * @brief srtp_crypto_policy_set_aes_cm_192_null_auth() sets a crypto
- * policy structure to an encryption-only policy
- *
- * @param p is a pointer to the policy structure to be set
- *
- * The function call srtp_crypto_policy_set_aes_cm_192_null_auth(&p) sets
- * the srtp_crypto_policy_t at location p to use the SRTP default cipher
- * (AES-192 Counter Mode), but to use no authentication method.  This
- * policy is NOT RECOMMENDED unless it is unavoidable; see Section 7.5
- * of RFC 3711 (http://www.ietf.org/rfc/rfc3711.txt).
- *
- * This function is a convenience that helps to avoid dealing directly
- * with the policy data structure.  You are encouraged to initialize
- * policy elements with this function call.  Doing so may allow your
- * code to be forward compatible with later versions of libSRTP that
- * include more elements in the srtp_crypto_policy_t datatype.
- *
- * @warning This policy is NOT RECOMMENDED for SRTP unless it is
- * unavoidable, and it is NOT RECOMMENDED at all for SRTCP; see
- * Section 7.5 of RFC 3711 (http://www.ietf.org/rfc/rfc3711.txt).
- *
- * @return void.
- *
- */
-void srtp_crypto_policy_set_aes_cm_192_null_auth(srtp_crypto_policy_t *p);
-
-/**
- * @brief srtp_crypto_policy_set_aes_gcm_128_8_auth() sets a crypto
- * policy structure to an AEAD encryption policy.
- *
- * @param p is a pointer to the policy structure to be set
- *
- * The function call srtp_crypto_policy_set_aes_gcm_128_8_auth(&p) sets
- * the srtp_crypto_policy_t at location p to use the SRTP default cipher
- * (AES-128 Galois Counter Mode) with 8 octet auth tag.  This
- * policy applies confidentiality and authentication to both the
- * RTP and RTCP packets.
- *
- * This function is a convenience that helps to avoid dealing directly
- * with the policy data structure.  You are encouraged to initialize
- * policy elements with this function call.  Doing so may allow your
- * code to be forward compatible with later versions of libSRTP that
- * include more elements in the srtp_crypto_policy_t datatype.
- *
- * @return void.
- *
- */
-void srtp_crypto_policy_set_aes_gcm_128_8_auth(srtp_crypto_policy_t *p);
-
-/**
- * @brief srtp_crypto_policy_set_aes_gcm_256_8_auth() sets a crypto
- * policy structure to an AEAD encryption policy
- *
- * @param p is a pointer to the policy structure to be set
- *
- * The function call srtp_crypto_policy_set_aes_gcm_256_8_auth(&p) sets
- * the srtp_crypto_policy_t at location p to use the SRTP default cipher
- * (AES-256 Galois Counter Mode) with 8 octet auth tag.  This
- * policy applies confidentiality and authentication to both the
- * RTP and RTCP packets.
- *
- * This function is a convenience that helps to avoid dealing directly
- * with the policy data structure.  You are encouraged to initialize
- * policy elements with this function call.  Doing so may allow your
- * code to be forward compatible with later versions of libSRTP that
- * include more elements in the srtp_crypto_policy_t datatype.
- *
- * @return void.
- *
- */
-void srtp_crypto_policy_set_aes_gcm_256_8_auth(srtp_crypto_policy_t *p);
-
-/**
- * @brief srtp_crypto_policy_set_aes_gcm_128_8_only_auth() sets a crypto
- * policy structure to an AEAD authentication-only policy
- *
- * @param p is a pointer to the policy structure to be set
- *
- * The function call srtp_crypto_policy_set_aes_gcm_128_8_only_auth(&p) sets
- * the srtp_crypto_policy_t at location p to use the SRTP default cipher
- * (AES-128 Galois Counter Mode) with 8 octet auth tag.  This policy
- * applies confidentiality and authentication to the RTP packets,
- * but only authentication to the RTCP packets.
- *
- * This function is a convenience that helps to avoid dealing directly
- * with the policy data structure.  You are encouraged to initialize
- * policy elements with this function call.  Doing so may allow your
- * code to be forward compatible with later versions of libSRTP that
- * include more elements in the srtp_crypto_policy_t datatype.
- *
- * @return void.
- *
- */
-void srtp_crypto_policy_set_aes_gcm_128_8_only_auth(srtp_crypto_policy_t *p);
-
-/**
- * @brief srtp_crypto_policy_set_aes_gcm_256_8_only_auth() sets a crypto
- * policy structure to an AEAD authentication-only policy
- *
- * @param p is a pointer to the policy structure to be set
- *
- * The function call srtp_crypto_policy_set_aes_gcm_256_8_only_auth(&p) sets
- * the srtp_crypto_policy_t at location p to use the SRTP default cipher
- * (AES-256 Galois Counter Mode) with 8 octet auth tag.  This policy
- * applies confidentiality and authentication to the RTP packets,
- * but only authentication to the RTCP packets.
- *
- * This function is a convenience that helps to avoid dealing directly
- * with the policy data structure.  You are encouraged to initialize
- * policy elements with this function call.  Doing so may allow your
- * code to be forward compatible with later versions of libSRTP that
- * include more elements in the srtp_crypto_policy_t datatype.
- *
- * @return void.
- *
- */
-void srtp_crypto_policy_set_aes_gcm_256_8_only_auth(srtp_crypto_policy_t *p);
-
-/**
- * @brief srtp_crypto_policy_set_aes_gcm_128_16_auth() sets a crypto
- * policy structure to an AEAD encryption policy.
- *
- * @param p is a pointer to the policy structure to be set
- *
- * The function call srtp_crypto_policy_set_aes_gcm_128_16_auth(&p) sets
- * the srtp_crypto_policy_t at location p to use the SRTP default cipher
- * (AES-128 Galois Counter Mode) with 16 octet auth tag.  This
- * policy applies confidentiality and authentication to both the
- * RTP and RTCP packets.
- *
- * This function is a convenience that helps to avoid dealing directly
- * with the policy data structure.  You are encouraged to initialize
- * policy elements with this function call.  Doing so may allow your
- * code to be forward compatible with later versions of libSRTP that
- * include more elements in the srtp_crypto_policy_t datatype.
- *
- * @return void.
- *
- */
-void srtp_crypto_policy_set_aes_gcm_128_16_auth(srtp_crypto_policy_t *p);
-
-/**
- * @brief srtp_crypto_policy_set_aes_gcm_256_16_auth() sets a crypto
- * policy structure to an AEAD encryption policy
- *
- * @param p is a pointer to the policy structure to be set
- *
- * The function call srtp_crypto_policy_set_aes_gcm_256_16_auth(&p) sets
- * the srtp_crypto_policy_t at location p to use the SRTP default cipher
- * (AES-256 Galois Counter Mode) with 16 octet auth tag.  This
- * policy applies confidentiality and authentication to both the
- * RTP and RTCP packets.
- *
- * This function is a convenience that helps to avoid dealing directly
- * with the policy data structure.  You are encouraged to initialize
- * policy elements with this function call.  Doing so may allow your
- * code to be forward compatible with later versions of libSRTP that
- * include more elements in the srtp_crypto_policy_t datatype.
- *
- * @return void.
- *
- */
-void srtp_crypto_policy_set_aes_gcm_256_16_auth(srtp_crypto_policy_t *p);
-
-/**
- * @brief srtp_dealloc() deallocates storage for an SRTP session
- * context.
- *
- * The function call srtp_dealloc(s) deallocates storage for the
- * SRTP session context s.  This function should be called no more
- * than one time for each of the contexts allocated by the function
- * srtp_create().
- *
- * @param s is the srtp_t for the session to be deallocated.
- *
- * @return
- *    - srtp_err_status_ok             if there no problems.
- *    - srtp_err_status_dealloc_fail   a memory deallocation failure occurred.
- */
-srtp_err_status_t srtp_dealloc(srtp_t s);
-
-/*
- * @brief identifies a particular SRTP profile
- *
- * An srtp_profile_t enumeration is used to identify a particular SRTP
- * profile (that is, a set of algorithms and parameters).
- */
-typedef enum {
-    srtp_profile_reserved = 0,
-    srtp_profile_aes128_cm_sha1_80 = 1,
-    srtp_profile_aes128_cm_sha1_32 = 2,
-    srtp_profile_null_sha1_80 = 5,
-    srtp_profile_null_sha1_32 = 6,
-    srtp_profile_aead_aes_128_gcm = 7,
-    srtp_profile_aead_aes_256_gcm = 8,
-} srtp_profile_t;
-
-/**
- * @brief srtp_crypto_policy_set_from_profile_for_rtp() sets a crypto policy
- * structure to the appropriate value for RTP based on an srtp_profile_t
- *
- * @param policy is a pointer to the policy structure to be set
- *
- * @param profile is an enumeration for the policy to be set
- *
- * The function call srtp_crypto_policy_set_rtp_default(&policy, profile)
- * sets the srtp_crypto_policy_t at location policy to the policy for RTP
- * protection, as defined by the srtp_profile_t profile.
- *
- * This function is a convenience that helps to avoid dealing directly
- * with the policy data structure.  You are encouraged to initialize
- * policy elements with this function call.  Doing so may allow your
- * code to be forward compatible with later versions of libSRTP that
- * include more elements in the srtp_crypto_policy_t datatype.
- *
- * @return values
- *     - srtp_err_status_ok         no problems were encountered
- *     - srtp_err_status_bad_param  the profile is not supported
- *
- */
-srtp_err_status_t srtp_crypto_policy_set_from_profile_for_rtp(
-    srtp_crypto_policy_t *policy,
-    srtp_profile_t profile);
-
-/**
- * @brief srtp_crypto_policy_set_from_profile_for_rtcp() sets a crypto policy
- * structure to the appropriate value for RTCP based on an srtp_profile_t
- *
- * @param policy is a pointer to the policy structure to be set
- *
- * @param profile is an enumeration for the policy to be set
- *
- * The function call srtp_crypto_policy_set_rtcp_default(&policy, profile)
- * sets the srtp_crypto_policy_t at location policy to the policy for RTCP
- * protection, as defined by the srtp_profile_t profile.
- *
- * This function is a convenience that helps to avoid dealing directly
- * with the policy data structure.  You are encouraged to initialize
- * policy elements with this function call.  Doing so may allow your
- * code to be forward compatible with later versions of libSRTP that
- * include more elements in the srtp_crypto_policy_t datatype.
- *
- * @return values
- *     - srtp_err_status_ok         no problems were encountered
- *     - srtp_err_status_bad_param  the profile is not supported
- *
- */
-srtp_err_status_t srtp_crypto_policy_set_from_profile_for_rtcp(
-    srtp_crypto_policy_t *policy,
-    srtp_profile_t profile);
-
-/**
- * @brief returns the master key length for a given SRTP profile
- */
-unsigned int srtp_profile_get_master_key_length(srtp_profile_t profile);
-
-/**
- * @brief returns the master salt length for a given SRTP profile
- */
-unsigned int srtp_profile_get_master_salt_length(srtp_profile_t profile);
-
-/**
- * @brief appends the salt to the key
- *
- * The function call srtp_append_salt_to_key(k, klen, s, slen)
- * copies the string s to the location at klen bytes following
- * the location k.
- *
- * @warning There must be at least bytes_in_salt + bytes_in_key bytes
- *          available at the location pointed to by key.
- *
- */
-void srtp_append_salt_to_key(unsigned char *key,
-                             unsigned int bytes_in_key,
-                             unsigned char *salt,
-                             unsigned int bytes_in_salt);
-
-/**
- * @}
- */
-
-/**
- * @defgroup SRTCP Secure RTCP
- * @ingroup  SRTP
- *
- * @brief Secure RTCP functions are used to protect RTCP traffic.
- *
- * RTCP is the control protocol for RTP.  libSRTP protects RTCP
- * traffic in much the same way as it does RTP traffic.  The function
- * srtp_protect_rtcp() applies cryptographic protections to outbound
- * RTCP packets, and srtp_unprotect_rtcp() verifies the protections on
- * inbound RTCP packets.
- *
- * A note on the naming convention: srtp_protect_rtcp() has an srtp_t
- * as its first argument, and thus has `srtp_' as its prefix.  The
- * trailing `_rtcp' indicates the protocol on which it acts.
- *
- * @{
- */
-
-/**
- * @brief srtp_protect_rtcp() is the Secure RTCP sender-side packet
- * processing function.
- *
- * The function call srtp_protect_rtcp(ctx, rtp_hdr, len_ptr) applies
- * SRTCP protection to the RTCP packet rtcp_hdr (which has length
- * *len_ptr) using the SRTP session context ctx.  If srtp_err_status_ok is
- * returned, then rtp_hdr points to the resulting SRTCP packet and
- * *len_ptr is the number of octets in that packet; otherwise, no
- * assumptions should be made about the value of either data elements.
- *
- * @warning This function assumes that it can write the authentication
- * tag into the location in memory immediately following the RTCP
- * packet, and assumes that the RTCP packet is aligned on a 32-bit
- * boundary.
- *
- * @warning This function assumes that it can write SRTP_MAX_TRAILER_LEN+4
- * into the location in memory immediately following the RTCP packet.
- * Callers MUST ensure that this much writable memory is available in
- * the buffer that holds the RTCP packet.
- *
- * @param ctx is the SRTP context to use in processing the packet.
- *
- * @param rtcp_hdr is a pointer to the RTCP packet (before the call); after
- * the function returns, it points to the srtp packet.
- *
- * @param pkt_octet_len is a pointer to the length in octets of the
- * complete RTCP packet (header and body) before the function call,
- * and of the complete SRTCP packet after the call, if srtp_err_status_ok
- * was returned.  Otherwise, the value of the data to which it points
- * is undefined.
- *
- * @return
- *    - srtp_err_status_ok            if there were no problems.
- *    - [other]                  if there was a failure in
- *                               the cryptographic mechanisms.
- */
-srtp_err_status_t srtp_protect_rtcp(srtp_t ctx,
-                                    void *rtcp_hdr,
-                                    int *pkt_octet_len);
-
-/**
- * @brief srtp_protect_rtcp_mki() is the Secure RTCP sender-side packet
- * processing function that can utilize mki.
- *
- * The function call srtp_protect_rtcp(ctx, rtp_hdr, len_ptr) applies
- * SRTCP protection to the RTCP packet rtcp_hdr (which has length
- * *len_ptr) using the SRTP session context ctx.  If srtp_err_status_ok is
- * returned, then rtp_hdr points to the resulting SRTCP packet and
- * *len_ptr is the number of octets in that packet; otherwise, no
- * assumptions should be made about the value of either data elements.
- *
- * @warning This function assumes that it can write the authentication
- * tag into the location in memory immediately following the RTCP
- * packet, and assumes that the RTCP packet is aligned on a 32-bit
- * boundary.
- *
- * @warning This function assumes that it can write SRTP_MAX_TRAILER_LEN+4
- * into the location in memory immediately following the RTCP packet.
- * Callers MUST ensure that this much writable memory is available in
- * the buffer that holds the RTCP packet.
- *
- * @param ctx is the SRTP context to use in processing the packet.
- *
- * @param rtcp_hdr is a pointer to the RTCP packet (before the call); after
- * the function returns, it points to the srtp packet.
- *
- * @param pkt_octet_len is a pointer to the length in octets of the
- * complete RTCP packet (header and body) before the function call,
- * and of the complete SRTCP packet after the call, if srtp_err_status_ok
- * was returned.  Otherwise, the value of the data to which it points
- * is undefined.
- *
- * @param use_mki is a boolean to tell the system if mki is being used.  If
- * set to false then will use the first set of session keys.  If set to true
- * will
- * use the session keys identified by the mki_index
- *
- * @param mki_index integer value specifying which set of session keys should be
- * used if use_mki is set to true.
- *
- * @return
- *    - srtp_err_status_ok            if there were no problems.
- *    - [other]                  if there was a failure in
- *                               the cryptographic mechanisms.
- */
-srtp_err_status_t srtp_protect_rtcp_mki(srtp_t ctx,
-                                        void *rtcp_hdr,
-                                        int *pkt_octet_len,
-                                        unsigned int use_mki,
-                                        unsigned int mki_index);
-
-/**
- * @brief srtp_unprotect_rtcp() is the Secure RTCP receiver-side packet
- * processing function.
- *
- * The function call srtp_unprotect_rtcp(ctx, srtp_hdr, len_ptr)
- * verifies the Secure RTCP protection of the SRTCP packet pointed to
- * by srtcp_hdr (which has length *len_ptr), using the SRTP session
- * context ctx.  If srtp_err_status_ok is returned, then srtcp_hdr points
- * to the resulting RTCP packet and *len_ptr is the number of octets
- * in that packet; otherwise, no assumptions should be made about the
- * value of either data elements.
- *
- * @warning This function assumes that the SRTCP packet is aligned on a
- * 32-bit boundary.
- *
- * @param ctx is a pointer to the srtp_t which applies to the
- * particular packet.
- *
- * @param srtcp_hdr is a pointer to the header of the SRTCP packet
- * (before the call).  After the function returns, it points to the
- * rtp packet if srtp_err_status_ok was returned; otherwise, the value of
- * the data to which it points is undefined.
- *
- * @param pkt_octet_len is a pointer to the length in octets of the
- * complete SRTCP packet (header and body) before the function call,
- * and of the complete rtp packet after the call, if srtp_err_status_ok was
- * returned.  Otherwise, the value of the data to which it points is
- * undefined.
- *
- * @return
- *    - srtp_err_status_ok          if the RTCP packet is valid.
- *    - srtp_err_status_auth_fail   if the SRTCP packet failed the message
- *                             authentication check.
- *    - srtp_err_status_replay_fail if the SRTCP packet is a replay (e.g. has
- *                             already been processed and accepted).
- *    - [other]  if there has been an error in the cryptographic mechanisms.
- *
- */
-srtp_err_status_t srtp_unprotect_rtcp(srtp_t ctx,
-                                      void *srtcp_hdr,
-                                      int *pkt_octet_len);
-
-/**
- * @brief srtp_unprotect_rtcp() is the Secure RTCP receiver-side packet
- * processing function.
- *
- * The function call srtp_unprotect_rtcp(ctx, srtp_hdr, len_ptr)
- * verifies the Secure RTCP protection of the SRTCP packet pointed to
- * by srtcp_hdr (which has length *len_ptr), using the SRTP session
- * context ctx.  If srtp_err_status_ok is returned, then srtcp_hdr points
- * to the resulting RTCP packet and *len_ptr is the number of octets
- * in that packet; otherwise, no assumptions should be made about the
- * value of either data elements.
- *
- * @warning This function assumes that the SRTCP packet is aligned on a
- * 32-bit boundary.
- *
- * @param ctx is a pointer to the srtp_t which applies to the
- * particular packet.
- *
- * @param srtcp_hdr is a pointer to the header of the SRTCP packet
- * (before the call).  After the function returns, it points to the
- * rtp packet if srtp_err_status_ok was returned; otherwise, the value of
- * the data to which it points is undefined.
- *
- * @param pkt_octet_len is a pointer to the length in octets of the
- * complete SRTCP packet (header and body) before the function call,
- * and of the complete rtp packet after the call, if srtp_err_status_ok was
- * returned.  Otherwise, the value of the data to which it points is
- * undefined.
- *
- * @param use_mki is a boolean to tell the system if mki is being used.  If
- * set to false then will use the first set of session keys.  If set to true
- * will use the session keys identified by the mki_index
- *
- * @return
- *    - srtp_err_status_ok          if the RTCP packet is valid.
- *    - srtp_err_status_auth_fail   if the SRTCP packet failed the message
- *                                  authentication check.
- *    - srtp_err_status_replay_fail if the SRTCP packet is a replay (e.g. has
- *                                  already been processed and accepted).
- *    - srtp_err_status_bad_mki     if the MKI in the packet is not a known MKI
- *                                  id
- *    - [other]                     if there has been an error in the
- *                                  cryptographic mechanisms.
- *
- */
-srtp_err_status_t srtp_unprotect_rtcp_mki(srtp_t ctx,
-                                          void *srtcp_hdr,
-                                          int *pkt_octet_len,
-                                          unsigned int use_mki);
-
-/**
- * @}
- */
-
-/**
- * @defgroup User data associated to a SRTP session.
- * @ingroup  SRTP
- *
- * @brief Store custom user data within a SRTP session.
- *
- * @{
- */
-
-/**
- * @brief srtp_set_user_data() stores the given pointer into the SRTP
- * session for later retrieval.
- *
- * @param ctx is the srtp_t context in which the given data pointer is
- * stored.
- *
- * @param data is a pointer to the custom information (struct, function,
- * etc) associated with the SRTP session.
- *
- * @return void.
- *
- */
-void srtp_set_user_data(srtp_t ctx, void *data);
-
-/**
- * @brief srtp_get_user_data() retrieves the pointer to the custom data
- * previously stored with srtp_set_user_data().
- *
- * This function is mostly useful for retrieving data associated to a
- * SRTP session when an event fires. The user can then get such a custom
- * data by calling this function with the session field of the
- * srtp_event_data_t struct as argument.
- *
- * @param ctx is the srtp_t context in which the given data pointer was
- * stored.
- *
- * @return void* pointer to the user data.
- *
- */
-void *srtp_get_user_data(srtp_t ctx);
-
-/**
- * @}
- */
-
-/**
- * @defgroup SRTPevents SRTP events and callbacks
- * @ingroup  SRTP
- *
- * @brief libSRTP can use a user-provided callback function to
- * handle events.
- *
- *
- * libSRTP allows a user to provide a callback function to handle
- * events that need to be dealt with outside of the data plane (see
- * the enum srtp_event_t for a description of these events).  Dealing
- * with these events is not a strict necessity; they are not
- * security-critical, but the application may suffer if they are not
- * handled.  The function srtp_set_event_handler() is used to provide
- * the callback function.
- *
- * A default event handler that merely reports on the events as they
- * happen is included.  It is also possible to set the event handler
- * function to NULL, in which case all events will just be silently
- * ignored.
- *
- * @{
- */
-
-/**
- * @brief srtp_event_t defines events that need to be handled
- *
- * The enum srtp_event_t defines events that need to be handled
- * outside the `data plane', such as SSRC collisions and
- * key expirations.
- *
- * When a key expires or the maximum number of packets has been
- * reached, an SRTP stream will enter an `expired' state in which no
- * more packets can be protected or unprotected.  When this happens,
- * it is likely that you will want to either deallocate the stream
- * (using srtp_remove_stream()), and possibly allocate a new one.
- *
- * When an SRTP stream expires, the other streams in the same session
- * are unaffected, unless key sharing is used by that stream.  In the
- * latter case, all of the streams in the session will expire.
- */
-typedef enum {
-    event_ssrc_collision,    /**< An SSRC collision occurred.           */
-    event_key_soft_limit,    /**< An SRTP stream reached the soft key   */
-                             /**< usage limit and will expire soon.     */
-    event_key_hard_limit,    /**< An SRTP stream reached the hard       */
-                             /**< key usage limit and has expired.      */
-    event_packet_index_limit /**< An SRTP stream reached the hard       */
-                             /**< packet limit (2^48 packets).          */
-} srtp_event_t;
-
-/**
- * @brief srtp_event_data_t is the structure passed as a callback to
- * the event handler function
- *
- * The struct srtp_event_data_t holds the data passed to the event
- * handler function.
- */
-typedef struct srtp_event_data_t {
-    srtp_t session;     /**< The session in which the event happened.       */
-    uint32_t ssrc;      /**< The ssrc in host order of the stream in which  */
-                        /**< the event happened                             */
-    srtp_event_t event; /**< An enum indicating the type of event.          */
-} srtp_event_data_t;
-
-/**
- * @brief srtp_event_handler_func_t is the function prototype for
- * the event handler.
- *
- * The typedef srtp_event_handler_func_t is the prototype for the
- * event handler function.  It has as its only argument an
- * srtp_event_data_t which describes the event that needs to be handled.
- * There can only be a single, global handler for all events in
- * libSRTP.
- */
-typedef void(srtp_event_handler_func_t)(srtp_event_data_t *data);
-
-/**
- * @brief sets the event handler to the function supplied by the caller.
- *
- * The function call srtp_install_event_handler(func) sets the event
- * handler function to the value func.  The value NULL is acceptable
- * as an argument; in this case, events will be ignored rather than
- * handled.
- *
- * @param func is a pointer to a function that takes an srtp_event_data_t
- *             pointer as an argument and returns void.  This function
- *             will be used by libSRTP to handle events.
- */
-srtp_err_status_t srtp_install_event_handler(srtp_event_handler_func_t func);
-
-/**
- * @brief Returns the version string of the library.
- *
- */
-const char *srtp_get_version_string(void);
-
-/**
- * @brief Returns the numeric representation of the library version.
- *
- */
-unsigned int srtp_get_version(void);
-
-/**
- * @brief srtp_set_debug_module(mod_name, v)
- *
- * sets dynamic debugging to the value v (0 for off, 1 for on) for the
- * debug module with the name mod_name
- *
- * returns err_status_ok on success, err_status_fail otherwise
- */
-srtp_err_status_t srtp_set_debug_module(const char *mod_name, int v);
-
-/**
- * @brief srtp_list_debug_modules() outputs a list of debugging modules
- *
- */
-srtp_err_status_t srtp_list_debug_modules(void);
-
-/**
- * @brief srtp_log_level_t defines log levels.
- *
- * The enumeration srtp_log_level_t defines log levels reported
- * in the srtp_log_handler_func_t.
- *
- */
-typedef enum {
-    srtp_log_level_error,   /**< log level is reporting an error message  */
-    srtp_log_level_warning, /**< log level is reporting a warning message */
-    srtp_log_level_info,    /**< log level is reporting an info message   */
-    srtp_log_level_debug    /**< log level is reporting a debug message   */
-} srtp_log_level_t;
-
-/**
- * @brief srtp_log_handler_func_t is the function prototype for
- * the log handler.
- *
- * The typedef srtp_event_handler_func_t is the prototype for the
- * event handler function.  It has as srtp_log_level_t, log
- * message and data as arguments.
- * There can only be a single, global handler for all log messages in
- * libSRTP.
- */
-typedef void(srtp_log_handler_func_t)(srtp_log_level_t level,
-                                      const char *msg,
-                                      void *data);
-
-/**
- * @brief sets the log handler to the function supplied by the caller.
- *
- * The function call srtp_install_log_handler(func) sets the log
- * handler function to the value func.  The value NULL is acceptable
- * as an argument; in this case, log messages will be ignored.
- * This function can be called before srtp_init() in order to capture
- * any logging during start up.
- *
- * @param func is a pointer to a function of type srtp_log_handler_func_t.
- *             This function will be used by libSRTP to output log messages.
- * @param data is a user pointer that will be returned as the data argument in
- * func.
- */
-srtp_err_status_t srtp_install_log_handler(srtp_log_handler_func_t func,
-                                           void *data);
-
-/**
- * @brief srtp_get_protect_trailer_length(session, use_mki, mki_index, length)
- *
- * Determines the length of the amount of data Lib SRTP will add to the
- * packet during the protect process. The length is returned in the length
- * parameter
- *
- * returns err_status_ok on success, err_status_bad_mki if the MKI index is
- * invalid
- *
- */
-srtp_err_status_t srtp_get_protect_trailer_length(srtp_t session,
-                                                  uint32_t use_mki,
-                                                  uint32_t mki_index,
-                                                  uint32_t *length);
-
-/**
- * @brief srtp_get_protect_rtcp_trailer_length(session, use_mki, mki_index,
- * length)
- *
- * Determines the length of the amount of data Lib SRTP will add to the
- * packet during the protect process. The length is returned in the length
- * parameter
- *
- * returns err_status_ok on success, err_status_bad_mki if the MKI index is
- * invalid
- *
- */
-srtp_err_status_t srtp_get_protect_rtcp_trailer_length(srtp_t session,
-                                                       uint32_t use_mki,
-                                                       uint32_t mki_index,
-                                                       uint32_t *length);
-
-/**
- * @brief srtp_set_stream_roc(session, ssrc, roc)
- *
- * Set the roll-over-counter on a session for a given SSRC
- *
- * returns err_status_ok on success, srtp_err_status_bad_param if there is no
- * stream found
- *
- */
-srtp_err_status_t srtp_set_stream_roc(srtp_t session,
-                                      uint32_t ssrc,
-                                      uint32_t roc);
-
-/**
- * @brief srtp_get_stream_roc(session, ssrc, roc)
- *
- * Get the roll-over-counter on a session for a given SSRC
- *
- * returns err_status_ok on success, srtp_err_status_bad_param if there is no
- * stream found
- *
- */
-srtp_err_status_t srtp_get_stream_roc(srtp_t session,
-                                      uint32_t ssrc,
-                                      uint32_t *roc);
-
-/**
- * @}
- */
-
-/* in host order, so outside the #if */
-#define SRTCP_E_BIT 0x80000000
-
-/* for byte-access */
-#define SRTCP_E_BYTE_BIT 0x80
-#define SRTCP_INDEX_MASK 0x7fffffff
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* SRTP_SRTP_H */