@realsee/dnalogel 4.0.0-webgpu.14 → 4.0.0-webgpu.16

package/dist/internal/measure-BEPx6Dxe.js

@@ -0,0 +1,7 @@
+import { t as e } from "./Controller-Bt2czarX.js";
+//#region src/MeasurePlugin/index.ts
+var t = (t, n) => new e(t, n);
+//#endregion
+export { t };
+
+//# sourceMappingURL=measure-BEPx6Dxe.js.map

package/dist/internal/measure-BEPx6Dxe.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"measure-BEPx6Dxe.js","names":["MeasureController","MeasurePlugin","five","config"],"sources":["../../src/MeasurePlugin/index.ts"],"sourcesContent":["import type { Five } from '@realsee/five-webgpu'\nimport { MeasureController } from './Controller'\n\nexport type MeasurePluginConfig = {\n  unit: 'm' | 'ft' | 'mm'\n  lengthEnable?: boolean\n  /**\n   * @description Length label precision.\n   * - When unit is `m`: number of decimal places.\n   * - When unit is `ft`: inch fraction denominator (`1` | `4` | `8` | `16` for 1\" / 1/4\" / 1/8\" / 1/16\").\n   * Area measurements remain at fixed 2 decimal places.\n   * @default 2\n   */\n  precision?: number\n}\n\n// 导出测量相关类型\nexport type { MeasureEndReason, MeasurePluginEventMap, MeasureInteractionState } from './Controller'\n\n// 导出多边形验证工具函数\nexport { validatePolygon } from './utils/validatePolygon'\n\nexport const MeasurePlugin = (five: Five, config?: MeasurePluginConfig) => new MeasureController(five, config)\n"],"mappings":";;AAsBA,IAAaC,KAAiB,GAAY,MAAiC,IAAID,EAAkBE,GAAMC,CAAM"}

package/dist/internal/measure-v2-sRY76hly.js

@@ -0,0 +1,83 @@
+import { c as e } from "./PointHelper-grrf8vu1.js";
+import { t } from "./Controller-Bt2czarX.js";
+import { a as n, i as r, n as i, o as a, s as o } from "./edgeSnap-8fdFCcXB.js";
+//#region src/MeasurePluginV2/Controller.ts
+var s = class extends t {
+	lastEdgeSnapEdgeCount = 0;
+	v2Five;
+	v2Magnifier;
+	v2Attached = !1;
+	edgeSnapOptions;
+	edgeSnapCache = new i();
+	constructor(e, t) {
+		super(e, t), this.v2Five = e, this.edgeSnapOptions = r(t?.edgeSnap);
+		let n = this.measure;
+		this.measure = () => {
+			this.edgeSnapCache.clear(), this.lastEdgeSnapEdgeCount = 0, this.pointSelector.clearDynamicAdhereLine(), n();
+		};
+	}
+	get edgeSnapEnabled() {
+		return this.edgeSnapOptions.enabled;
+	}
+	setEdgeSnapEnabled(e) {
+		this.edgeSnapOptions.enabled = e, this.edgeSnapCache.clear(), this.lastEdgeSnapEdgeCount = 0, this.pointSelector.clearDynamicAdhereLine(), this.pointSelector.refresh(), this.v2Five.needsRender = !0;
+	}
+	get magnifier() {
+		return this.v2Magnifier;
+	}
+	createPointSelector() {
+		return new o(this.v2Five, {
+			mode: "cursor",
+			helper: {
+				pointHelper: "highlight",
+				...e ? { magnifierParams: {
+					width: 150,
+					height: 150,
+					dragEnabled: !1,
+					autoFixPCPosition: !1,
+					initialPosition: {
+						left: "12px",
+						top: "12px"
+					}
+				} } : {}
+			},
+			skipPanorama: !0
+		});
+	}
+	get pointSelector() {
+		let e = super.pointSelector;
+		return this.v2Attached || (this.v2Attached = !0, this.attachOverlayRenderers(e)), e;
+	}
+	attachOverlayRenderers(e) {
+		let t = e.pointSelectorHelper;
+		this.attachMagnifier(t), this.attachPointHelper(t), this.attachEdgeSnap(e), e.on("intersectionUpdate", (e) => {
+			this.v2Magnifier?.setIntersection(e ?? null);
+		});
+	}
+	attachMagnifier(e) {
+		let t = e.magnifier;
+		if (!t) return;
+		let n = new a(this.v2Five, {
+			...t.config,
+			width: t.width,
+			height: t.height,
+			scale: t.scale
+		});
+		t.containerDom && n.appendTo(t.containerDom), t.state.enabled && n.enable(), e.magnifier = n, t.dispose(), this.v2Magnifier = n;
+	}
+	attachPointHelper(e) {
+		let t = e.pointHelper;
+		e.pointHelper = new n(this.v2Five), t?.dispose(), t?.parent && t.parent.remove(t);
+	}
+	attachEdgeSnap(e) {
+		e.adhereLineProvider = ({ intersection: e }) => {
+			if (!e?.point) return [];
+			let t = this.edgeSnapCache.query(this.v2Five.model, e.point, this.edgeSnapOptions);
+			return this.lastEdgeSnapEdgeCount = t.length, t;
+		};
+	}
+}, c = (e, t) => new s(e, t);
+//#endregion
+export { s as n, c as t };
+
+//# sourceMappingURL=measure-v2-sRY76hly.js.map

package/dist/internal/measure-v2-sRY76hly.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"measure-v2-sRY76hly.js","names":["isTouchDevice","MeasurePointHelperV2","resolveEdgeSnapOptions","EdgeSnapCache","MeasureMagnifier","MeasurePointSelector","MeasureControllerV2","MeasureController","five","config","measure","enabled","pointSelector","helper","intersection","original","magnifier","edges","MeasurePluginV2"],"sources":["../../src/MeasurePluginV2/Controller.ts","../../src/MeasurePluginV2/index.ts"],"sourcesContent":["import type { Five } from '@realsee/five-webgpu'\nimport { MeasurePointSelector } from './PointSelector'\nimport { MeasureController } from '../MeasurePlugin/Controller'\nimport { isTouchDevice } from '../shared-utils/isTouchDevice'\nimport type { MeasurePluginConfig } from '../MeasurePlugin'\nimport { MeasureMagnifier } from './Magnifier'\nimport { MeasurePointHelperV2 } from './PointHelper'\nimport { EdgeSnapCache, resolveEdgeSnapOptions, type EdgeSnapOptions, type ResolvedEdgeSnapOptions } from './edgeSnap'\n\n/**\n * 量尺插件 V2：把放大镜和场景里的小光标换成带「红 / 绿 / 蓝坐标轴 + 红色截面框」的版本。\n *\n * 复用 MeasureController 的测量流程，通过工厂创建独立的 V2 选点器，并替换两个渲染组件：\n * - pointSelectorHelper.magnifier → MeasureMagnifier（多画一层叠加层）\n * - pointSelectorHelper.pointHelper → MeasurePointHelperV2（同样的红 / 绿 / 蓝 + 截面框）\n *\n * 两个替换件都沿用原实例的全部参数（宽高、缩放、autoFixPCPosition、dragEnabled、挂载容器），\n * 所以放大镜出现的位置、跟随方式、是否吃鼠标事件都和原插件一致，不会挡住在原本能选中的点位。\n */\n/** V2 配置：在原 MeasurePlugin 配置上增加模型边缘吸附 */\nexport type MeasurePluginV2Config = MeasurePluginConfig & {\n  /**\n   * @description 模型边缘吸附（试验能力）：落点靠近模型边线时自动吸到边上。\n   * 传 `false` 可关闭；不传默认开启。\n   */\n  edgeSnap?: boolean | EdgeSnapOptions\n}\n\nexport class MeasureControllerV2 extends MeasureController {\n  /** 最近一次查询到的候选边数量，示例页 / 调试用 */\n  public lastEdgeSnapEdgeCount = 0\n\n  private v2Five: Five\n  private v2Magnifier?: MeasureMagnifier\n  private v2Attached = false\n  private readonly edgeSnapOptions: ResolvedEdgeSnapOptions\n  private readonly edgeSnapCache = new EdgeSnapCache()\n\n  public constructor(five: Five, config?: MeasurePluginV2Config) {\n    super(five, config)\n    this.v2Five = five\n    this.edgeSnapOptions = resolveEdgeSnapOptions(config?.edgeSnap)\n\n    // MeasureController.measure 是实例上的箭头函数，不能用 prototype 方法覆盖，\n    // 这里在包装后的入口里清一次缓存，避免上一次测量 / 上一楼层的边残留。\n    const measure = this.measure\n    this.measure = () => {\n      this.edgeSnapCache.clear()\n      this.lastEdgeSnapEdgeCount = 0\n      this.pointSelector.clearDynamicAdhereLine()\n      measure()\n    }\n  }\n\n  public get edgeSnapEnabled() {\n    return this.edgeSnapOptions.enabled\n  }\n\n  /** 运行时开关模型边缘吸附（不需要重开测量） */\n  public setEdgeSnapEnabled(enabled: boolean) {\n    this.edgeSnapOptions.enabled = enabled\n    this.edgeSnapCache.clear()\n    this.lastEdgeSnapEdgeCount = 0\n    this.pointSelector.clearDynamicAdhereLine()\n    this.pointSelector.refresh()\n    this.v2Five.needsRender = true\n  }\n\n  /** V2 的放大镜实例；需要临时关掉叠加层做对比时，可以 magnifier.setOverlayEnabled(false) */\n  public get magnifier() {\n    return this.v2Magnifier\n  }\n\n  protected override createPointSelector() {\n    return new MeasurePointSelector(this.v2Five, { mode: 'cursor', helper: { pointHelper: 'highlight', ...(isTouchDevice ? { magnifierParams: { width: 150, height: 150, dragEnabled: false, autoFixPCPosition: false, initialPosition: { left: '12px', top: '12px' } } } : {}) }, skipPanorama: true })\n  }\n\n  public override get pointSelector(): MeasurePointSelector {\n    const pointSelector = super.pointSelector as MeasurePointSelector\n    if (!this.v2Attached) {\n      this.v2Attached = true\n      this.attachOverlayRenderers(pointSelector)\n    }\n    return pointSelector\n  }\n\n  private attachOverlayRenderers(pointSelector: MeasurePointSelector) {\n    const helper = pointSelector.pointSelectorHelper\n    this.attachMagnifier(helper)\n    this.attachPointHelper(helper)\n    this.attachEdgeSnap(pointSelector)\n\n    // 放大镜是在 renderFrame 里渲染的，而这次事件是同步抛出的，\n    // 所以放大镜真正渲染时一定已经拿到了当次的落点与法线\n    pointSelector.on('intersectionUpdate', (intersection) => {\n      this.v2Magnifier?.setIntersection(intersection ?? null)\n    })\n  }\n\n  private attachMagnifier(helper: MeasurePointSelector['pointSelectorHelper']) {\n    const original = helper.magnifier\n    if (!original) return\n\n    // 宽 / 高 / 缩放 / dragEnabled / autoFixPCPosition / skipPanorama 全部照抄原实例，\n    // 只把 render 换成「读像素之后再多画一层坐标轴 + 截面框」\n    const magnifier = new MeasureMagnifier(this.v2Five, {\n      ...original.config,\n      width: original.width,\n      height: original.height,\n      scale: (original as any).scale,\n    })\n\n    if (original.containerDom) magnifier.appendTo(original.containerDom)\n    if (original.state.enabled) magnifier.enable()\n\n    helper.magnifier = magnifier\n    // 原放大镜自己的 canvas 和 hammer 手势一并释放，避免两个 canvas 叠在一起\n    original.dispose()\n    this.v2Magnifier = magnifier\n  }\n\n  private attachPointHelper(helper: MeasurePointSelector['pointSelectorHelper']) {\n    const original = helper.pointHelper\n    const pointHelper = new MeasurePointHelperV2(this.v2Five)\n    helper.pointHelper = pointHelper\n\n    original?.dispose()\n    if (original?.parent) original.parent.remove(original)\n  }\n\n  /**\n   * 模型边缘吸附：每次选点器计算吸附前，按当前落点取附近的模型边界线。\n   * 真正的吸附判断（3D 距离 / 屏幕距离）仍在 PointSelector 里，这里只负责供线。\n   */\n  private attachEdgeSnap(pointSelector: MeasurePointSelector) {\n    pointSelector.adhereLineProvider = ({ intersection }) => {\n      if (!intersection?.point) return []\n      const edges = this.edgeSnapCache.query(this.v2Five.model, intersection.point, this.edgeSnapOptions)\n      this.lastEdgeSnapEdgeCount = edges.length\n      return edges\n    }\n  }\n}\n","import type { Five } from '@realsee/five-webgpu'\nimport { MeasureControllerV2 } from './Controller'\n\n/**\n * 量尺插件 V2 —— 点位选择可视化（对应 PRD《量尺点位选择器优化》）\n *\n * 与 MeasurePlugin 的关系：V2 是试点 fork，完全继承 MeasurePlugin 的控制器，\n * 新吸附算法、放大镜叠加层和场景光标仅在 V2 中生效，原插件继续使用原选点器。\n *\n * 使用方式（Console / 编辑器等接入方）：\n * ```ts\n * import { MeasurePluginV2 } from '@realsee/dnalogel/plugins/measure-v2'\n * const measure = MeasurePluginV2(five, { unit: 'm' })\n * ```\n */\nexport { MeasureControllerV2 } from './Controller'\nexport type { MeasurePluginV2Config } from './Controller'\nexport { MeasureMagnifier } from './Magnifier'\nexport type { MeasureMagnifierOptions } from './Magnifier'\nexport { drawMeasureOverlay, getWorldNormal, OVERLAY_STYLE } from './PointOverlay'\nexport type { MagnifierViewport } from './PointOverlay'\nexport { collectNearbyEdges, EdgeSnapCache, DEFAULT_EDGE_SNAP_OPTIONS } from './edgeSnap'\nexport type { EdgeSnapOptions, ResolvedEdgeSnapOptions } from './edgeSnap'\n\n// 与 MeasurePlugin 完全一致的类型与工具，方便接入方整体替换 import 来源\nexport { validatePolygon } from '../MeasurePlugin'\nexport type { MeasureEndReason, MeasurePluginConfig, MeasurePluginEventMap, MeasureInteractionState } from '../MeasurePlugin'\n\nexport type MeasureControllerV2Interface = InstanceType<typeof MeasureControllerV2>\nexport type MeasurePluginV2ParamsInterface = ConstructorParameters<typeof MeasureControllerV2>[1]\n\nexport const MeasurePluginV2 = (five: Five, config?: MeasurePluginV2ParamsInterface) => {\n  return new MeasureControllerV2(five, config)\n}\n\nexport default MeasurePluginV2\n"],"mappings":";;;;AA4BA,IAAaM,IAAb,cAAyCC,EAAkB;CAEzD,wBAA+B;CAE/B;CACA;CACA,aAAqB;CACrB;CACA,gBAAiC,IAAIJ,EAAc;CAEnD,YAAmB,GAAY,GAAgC;EAG7D,AAFA,MAAMK,GAAMC,CAAM,GAClB,KAAK,SAASD,GACd,KAAK,kBAAkBN,EAAuBO,GAAQ,QAAQ;EAI9D,IAAMC,IAAU,KAAK;EACrB,KAAK,gBAAgB;GAInB,AAHA,KAAK,cAAc,MAAM,GACzB,KAAK,wBAAwB,GAC7B,KAAK,cAAc,uBAAuB,GAC1CA,EAAQ;EACV;CACF;CAEA,IAAW,kBAAkB;EAC3B,OAAO,KAAK,gBAAgB;CAC9B;CAGA,mBAA0B,GAAkB;EAM1C,AALA,KAAK,gBAAgB,UAAUC,GAC/B,KAAK,cAAc,MAAM,GACzB,KAAK,wBAAwB,GAC7B,KAAK,cAAc,uBAAuB,GAC1C,KAAK,cAAc,QAAQ,GAC3B,KAAK,OAAO,cAAc;CAC5B;CAGA,IAAW,YAAY;EACrB,OAAO,KAAK;CACd;CAEA,sBAAyC;EACvC,OAAO,IAAIN,EAAqB,KAAK,QAAQ;GAAE,MAAM;GAAU,QAAQ;IAAE,aAAa;IAAa,GAAIL,IAAgB,EAAE,iBAAiB;KAAE,OAAO;KAAK,QAAQ;KAAK,aAAa;KAAO,mBAAmB;KAAO,iBAAiB;MAAE,MAAM;MAAQ,KAAK;KAAO;IAAE,EAAE,IAAI,CAAC;GAAG;GAAG,cAAc;EAAK,CAAC;CACrS;CAEA,IAAoB,gBAAsC;EACxD,IAAMY,IAAgB,MAAM;EAK5B,OAJK,KAAK,eACR,KAAK,aAAa,IAClB,KAAK,uBAAuBA,CAAa,IAEpCA;CACT;CAEA,uBAA+B,GAAqC;EAClE,IAAMC,IAASD,EAAc;EAO7B,AANA,KAAK,gBAAgBC,CAAM,GAC3B,KAAK,kBAAkBA,CAAM,GAC7B,KAAK,eAAeD,CAAa,GAIjCA,EAAc,GAAG,uBAAuB,MAAiB;GACvD,KAAK,aAAa,gBAAgBE,KAAgB,IAAI;EACxD,CAAC;CACH;CAEA,gBAAwB,GAAqD;EAC3E,IAAMC,IAAWF,EAAO;EACxB,IAAI,CAACE,GAAU;EAIf,IAAMC,IAAY,IAAIZ,EAAiB,KAAK,QAAQ;GAClD,GAAGW,EAAS;GACZ,OAAOA,EAAS;GAChB,QAAQA,EAAS;GACjB,OAAQA,EAAiB;EAC3B,CAAC;EAQD,AANIA,EAAS,gBAAcC,EAAU,SAASD,EAAS,YAAY,GAC/DA,EAAS,MAAM,WAASC,EAAU,OAAO,GAE7C,EAAO,YAAYA,GAEnBD,EAAS,QAAQ,GACjB,KAAK,cAAcC;CACrB;CAEA,kBAA0B,GAAqD;EAC7E,IAAMD,IAAWF,EAAO;EAKxB,AAHA,EAAO,cAAc,IADGZ,EAAqB,KAAK,MAC7B,GAErBc,GAAU,QAAQ,GACdA,GAAU,UAAQA,EAAS,OAAO,OAAOA,CAAQ;CACvD;CAMA,eAAuB,GAAqC;EAC1D,EAAc,sBAAsB,EAAE,sBAAmB;GACvD,IAAI,CAACD,GAAc,OAAO,OAAO,CAAC;GAClC,IAAMG,IAAQ,KAAK,cAAc,MAAM,KAAK,OAAO,OAAOH,EAAa,OAAO,KAAK,eAAe;GAElG,OADA,KAAK,wBAAwBG,EAAM,QAC5BA;EACT;CACF;AACF,GC/GaC,KAAmB,GAAY,MACnC,IAAIZ,EAAoBE,GAAMC,CAAM"}

package/dist/internal/{model-maker-tbF87kJz.js → model-maker-ggAsocXZ.js}

@@ -6,7 +6,7 @@ import { n as o, t as s } from "./isNil-CQNA0Sbe.js";
 import { t as c } from "./FiveDomEvents-DFG9hd51.js";
 import { n as l } from "./Line2-CDxLMjGj.js";
 import { i as u, n as d } from "./boundingBox-CIqXgNXW.js";
-import { t as f } from "./BasePluginWithData-Uq1cY5sC.js";
+import { t as f } from "./BasePluginWithData-BLOUilj_.js";
 import { C as p, G as m, J as h, M as g, N as _, P as ee, j as te, n as v, q as y, t as b } from "./component.svelte-D5LYqt50.js";
 import { t as x } from "./LabelItem-Cnys51gZ.js";
 import { n as S, r as ne } from "./fontSize-DMhRSrtx.js";
@@ -894,4 +894,4 @@ var pe = class extends f {
 //#endregion
 export { G as n, me as t };
 
-//# sourceMappingURL=model-maker-tbF87kJz.js.map
+//# sourceMappingURL=model-maker-ggAsocXZ.js.map