@realsee/dnalogel 3.64.23-alpha.4 → 3.64.23-ke-webgpu.1

package/dist/floorplan/MapviewFloorplanPlugin/Controller.d.ts

@@ -1,6 +1,6 @@
 import type { PartialDeep } from 'type-fest';
 import type { BaseOptions } from '../../base/BasePlugin';
-import type { Five } from '@realsee/five';
+import type { Five } from '@realsee/five-webgpu';
 import type { ShowState } from '../utils/correctFiveState';
 import type { FloorplanServerData } from '../typings/floorplanServerData';
 import type { State, Config, EventMap, ShowOptions, HideOptions, Parameters, PluginData, PluginServerData, HighlightData } from './typing';
@@ -67,10 +67,26 @@ export declare class Controller extends BasePlugin.Controller<State, EventMap, P
     changeConfigs(config: Partial<Config>, userAction?: boolean): void;
     /** 更新户型图大小 */
     updateSize: () => boolean;
+    /** 根据旋转角度计算 pxmm
+     * @description 当 longitude 大于 45° 或小于 -45°（相对于基准方向）时，使用 Z 轴计算
+     */
+    private getPxmmWithRotation;
+    /** 使用 Z 轴计算 pxmm
+     * @description 当相机旋转导致 X 轴接近垂直于屏幕时，改用 Z 轴计算
+     */
+    private getPxmmZAxis;
     /** 更新户型图位置 */
     updatePosition(): void;
     highlight: (highlightData: HighlightData) => void;
     unhighlight: () => void;
+    /** 更新展示状态
+     * @description 可以更新 longitude、latitude、offset 等参数
+     * @param showState 需要更新的状态，会与现有状态合并
+     * @example
+     * // 更新 longitude
+     * plugin.updateShowState({ longitude: Math.PI / 2 })
+     */
+    updateShowState: (showState: Partial<ShowState>) => void;
     protected formatData(serverData: PluginServerData): Promise<PluginData>;
     private _disable;
     private _enable;
@@ -95,6 +111,11 @@ export declare class Controller extends BasePlugin.Controller<State, EventMap, P
     private onFivePanoArrived;
     /** cameraUpdate 时判断户型图是否应该自动隐藏 */
     private onFiveCameraUpdate;
+    /** 获取相对于 showState 的 pose 偏差
+     * @description 将当前相机状态的 longitude 减去 showState.longitude，归一化后返回
+     * 这样自动隐藏逻辑会检查相对偏差，而不是绝对值
+     */
+    private getRelativePose;
     /** 户型图展示中，转动三维模型，结束时应该自动修复模型状态 */
     private onFiveWantsPanGesture;
     /** 阻止点击分间走点 */

package/dist/floorplan/MapviewFloorplanPlugin/index.d.ts

@@ -1,5 +1,5 @@
 import type { Parameters } from './typing';
-import type { FivePlugin } from '@realsee/five';
+import type { FivePlugin } from '@realsee/five-webgpu';
 import { Controller } from './Controller';
 export declare const MapviewFloorplanPlugin: FivePlugin<undefined | Parameters, Controller>;
 export type MapviewFloorplanPluginParameterType = Parameters | undefined;

package/dist/floorplan/ModelFloorplanPlugin/Controller.d.ts

@@ -1,6 +1,6 @@
 import type { PartialDeep } from 'type-fest';
 import type { BaseOptions } from '../../base/BasePlugin';
-import type { Five } from '@realsee/five';
+import type { Five } from '@realsee/five-webgpu';
 import type { ShowState } from '../utils/correctFiveState';
 import type { FloorplanServerData } from '../typings/floorplanServerData';
 import type { State, Config, EventMap, ShowOptions, HideOptions, Parameters, PluginData, PluginServerData, HighlightData } from './typing';
@@ -65,8 +65,24 @@ export declare class Controller extends BasePlugin.Controller<State, EventMap, P
     changeConfigs(config: Partial<Config>, userAction?: boolean): void;
     /** 更新户型图大小 */
     updateSize: () => boolean;
+    /** 根据旋转角度计算 pxmm
+     * @description 当 longitude 大于 45° 或小于 -45°（相对于基准方向）时，使用 Z 轴计算
+     */
+    private getPxmmWithRotation;
+    /** 使用 Z 轴计算 pxmm
+     * @description 当相机旋转导致 X 轴接近垂直于屏幕时，改用 Z 轴计算
+     */
+    private getPxmmZAxis;
     highlight: (highlightData: HighlightData) => void;
     unhighlight: () => void;
+    /** 更新展示状态
+     * @description 可以更新 longitude、latitude、fov 等参数
+     * @param showState 需要更新的状态，会与现有状态合并
+     * @example
+     * // 更新 longitude
+     * plugin.updateShowState({ longitude: Math.PI / 2 })
+     */
+    updateShowState: (showState: Partial<ShowState>) => void;
     protected formatData(serverData: PluginServerData): Promise<PluginData>;
     private _disable;
     private _enable;

package/dist/floorplan/ModelFloorplanPlugin/index.d.ts

@@ -1,5 +1,5 @@
 import type { Parameters } from './typing';
-import type { FivePlugin } from '@realsee/five';
+import type { FivePlugin } from '@realsee/five-webgpu';
 import { Controller } from './Controller';
 export declare const ModelFloorplanPlugin: FivePlugin<undefined | Parameters, Controller>;
 export type ModelFloorplanPluginParameterType = Parameters | undefined;

package/dist/floorplan/PanoFloorplanRadarPlugin/Controller.d.ts

@@ -1,4 +1,4 @@
-import type { Five } from '@realsee/five';
+import type { Five } from '@realsee/five-webgpu';
 import type { BaseOptions } from '../../base/BasePlugin';
 import type { FloorplanServerData } from '../typings/floorplanServerData';
 import type { FloorplanExtraObject3D } from '../typings/floorplanData';

package/dist/floorplan/PanoFloorplanRadarPlugin/index.d.ts

@@ -1,5 +1,5 @@
 import type { Parameters } from './typing';
-import type { FivePlugin } from '@realsee/five';
+import type { FivePlugin } from '@realsee/five-webgpu';
 import { Controller } from './Controller';
 export declare const PanoFloorplanRadarPlugin: FivePlugin<Parameters | undefined, Controller>;
 export type PanoFloorplanRadarPluginParameterType = Parameters | undefined;

package/dist/floorplan/TopviewFloorplanPlugin/Controller.d.ts

@@ -1,6 +1,6 @@
 import type { PartialDeep } from 'type-fest';
 import type { BaseOptions } from '../../base/BasePlugin';
-import type { Five } from '@realsee/five';
+import type { Five } from '@realsee/five-webgpu';
 import type { FloorplanServerData } from '../typings/floorplanServerData';
 import type { State, Config, EventMap, Parameters, PluginData, PluginServerData, HighlightData } from './typing';
 import * as BasePlugin from '../../base/BasePluginWithData';
@@ -56,7 +56,7 @@ export declare class Controller extends BasePlugin.Controller<State, EventMap, P
     private removeEventListener;
     /** modelLoaded 之后自动执行 append container 操作  */
     private onFiveModelLoaded;
-    /** 非 Topview 态隐藏户型图 */
+    /** 离开 Topview 时隐藏户型图；进入后的展示延迟到动画结束 */
     private onFiveModeChange;
     private onFivePanoArrived;
     private onFiveCameraUpdate;

package/dist/floorplan/TopviewFloorplanPlugin/index.d.ts

@@ -1,5 +1,5 @@
 import type { Parameters } from './typing';
-import type { FivePlugin } from '@realsee/five';
+import type { FivePlugin } from '@realsee/five-webgpu';
 import { Controller } from './Controller';
 export declare const TopviewFloorplanPlugin: FivePlugin<undefined | Parameters, Controller>;
 export type TopviewFloorplanPluginParameterType = Parameters | undefined;

package/dist/floorplan/typings/floorplanData.d.ts

@@ -100,6 +100,53 @@ export interface FloorplanFloorData {
     rules: FloorplanRuleLabels;
     items?: any[];
 }
+interface IAreas {
+    id: string;
+    direction: string;
+    directionCode: string;
+    roomType: string;
+    sharedLineItems: string[];
+    sharedLines: string[];
+    towardsRad: number;
+    type: number;
+}
+export interface IFloorplanArea {
+    attachments: {
+        areas: IAreas[];
+        lineItems: {
+            direction: string;
+            directionCode: string;
+            edge: boolean;
+            id: string;
+            is: string;
+            length: number;
+            towardsRad: number;
+        }[];
+    };
+    points: string[];
+    roomName: string;
+    roomType: string;
+    roomTypeName: number;
+    typeName: string;
+    type: number;
+    id: string;
+    empty: boolean;
+    roomTypeLabelMod: boolean;
+    labelX: number;
+    labelY: number;
+    hideName: boolean;
+    size: number;
+    customizedName: string;
+    displayName: string;
+    floorType: number;
+    hideSize: boolean;
+    nameIndex: string;
+    simpleLabelMod: false;
+    sizeWithoutLine: number;
+    subLabelX: number;
+    subLabelY: number;
+    subType: number;
+}
 /** 对 observer 做一些样式上的计算
  * @description 每一个 floorplanObserver 对应一个 observer
  * @description floorplanObserver 和 observer 在自身数组中的索引坐标应该是相同的
@@ -117,6 +164,7 @@ export interface FloorplanData {
     entrance: FloorplanEntrance | null;
     bounding: FloorplanBounding;
     observers: FloorplanObserver[];
+    areas: IFloorplanArea[][];
 }
 /** 能够映射到雷达图上的三维物体 */
 export interface FloorplanExtraObject3D {
@@ -146,3 +194,4 @@ export interface FloorplanExtraObject {
     /** 入户门在户型图上相对坐标 */
     positionInImage: FloorplanImagePosition;
 }
+export {};

package/dist/floorplan/typings/floorplanServerData.d.ts

@@ -1,3 +1,4 @@
+import type { IFloorplanArea } from "./floorplanData";
 /** 房屋数据映射表 */
 export declare const ROOM_FETILE_TYPE_MAP: ({
     type: number;
@@ -144,6 +145,7 @@ export interface FloorplanServerComputedData {
     bounding: FloorplanServerBounding;
     observers: FloorplanServerObserver[];
     doors: FloorplanServerDoorItem[];
+    areas: IFloorplanArea[][];
 }
 /** 原始输入的户型图数据 */
 export interface FloorplanServerData {

package/dist/floorplan/typings/index.d.ts

@@ -3,6 +3,7 @@ import type { FLOOR_PLAN_ATTACHED_TO } from '../constant';
 import type { FloorplanData } from '../typings/floorplanData';
 import type * as BasePlugin from '../../base/BasePluginWithData';
 import type { FloorplanServerData } from '../typings/floorplanServerData';
+import type { ShowState } from '../utils/correctFiveState';
 export interface State extends BasePlugin.State {
     visible: boolean;
     config: Config;
@@ -85,6 +86,8 @@ export interface Config {
 export interface Parameters extends Partial<Config> {
     selector?: string | Element;
     scale?: number;
+    /** 展示状态配置，可以自定义 longitude、latitude、fov 等参数 */
+    showState?: Partial<ShowState>;
 }
 export interface PluginServerData {
     version: number;

package/dist/floorplan/utils/correctFiveState.d.ts

@@ -1,5 +1,5 @@
 import type * as THREE from 'three';
-import type { Five, Mode } from '@realsee/five';
+import type { Five, Mode } from '@realsee/five-webgpu';
 export interface ShowState {
     latitude: number;
     longitude: number;

package/dist/floorplan/utils/formatData.d.ts

@@ -1,4 +1,4 @@
-import type { Five } from '@realsee/five';
+import type { Five } from '@realsee/five-webgpu';
 import type { FloorplanData, FloorplanExtraObject, FloorplanExtraObject3D } from '../typings/floorplanData';
 import type { FloorplanServerData } from '../typings/floorplanServerData';
 export default function formatData(data: FloorplanServerData): Promise<FloorplanData>;

package/dist/floorplan/utils/formatPosition.d.ts

@@ -1,4 +1,4 @@
-import type { Five } from '@realsee/five';
+import type { Five } from '@realsee/five-webgpu';
 import type { Vector2Position } from '../../typings/math.type';
 import type { FloorplanData, FloorplanBounding } from '../typings/floorplanData';
 export declare function pathD(points: Vector2Position[], options?: {