@realsee/dnalogel 2.0.0 → 2.0.2-alpha

package/dist/CruisePlugin/PanoMeasurePlugin/utils/distanceDom.d.ts

@@ -12,12 +12,12 @@ export interface UserDistanceItem {
         polyline: PolylineCompletelyJson;
     }) => void;
 }
-export interface IDistanceItemProps {
+export interface CreateDistanceItemProps {
     line: Line;
     userDistanceItem?: UserDistanceItem;
     clickCallback?: (item: DistanceItem) => unknown;
 }
-export declare function createDistanceItem(props: IDistanceItemProps): {
+export declare function createDistanceItem(props: CreateDistanceItemProps): {
     lineID: string;
     ndcPosition: Vector3;
     update: (five: Five) => void;

package/dist/CruisePlugin/PanoRulerPlugin/Plugin.d.ts

@@ -1,7 +1,9 @@
 import type { FivePlugin } from '@realsee/five';
 import type { RoomInfo, RoomRules } from './typings';
-export interface PanoRulerPluginOptions {
-    distanceText?: (distance: number) => string;
+interface PanoRulerPluginConfig {
+    distanceText: (distance: number) => string;
+}
+export interface PanoRulerPluginOptions extends Partial<PanoRulerPluginConfig> {
     className?: string;
 }
 interface PanoRulerPluginPluginState {
@@ -19,6 +21,7 @@ export interface PanoRulerPluginExportType {
     disable: () => void;
     load: (roomInfo?: RoomInfo, roomRules?: RoomRules, options?: PanoRulerPluginOptions) => Promise<boolean>;
     state: PanoRulerPluginPluginState;
+    changeConfigs: (config: Partial<PanoRulerPluginConfig>) => void;
 }
 /**
  * 全景标尺插件

package/dist/CruisePlugin/floorplan/ModelFloorplanPlugin/Controller.d.ts

@@ -1,3 +1,4 @@
+import type { PartialDeep } from 'type-fest';
 import type { BaseOptions } from '../../base/BasePlugin';
 import type { Five } from '@realsee/five';
 import type { ShowState } from '../utils/correctFiveState';
@@ -56,8 +57,8 @@ export declare class Controller extends BasePlugin.Controller<State, EventMap, P
     /** 隐藏户型图 */
     hide: (options?: Partial<HideOptions>) => Promise<void>;
     /** 更改插件 State */
-    setState(state: Partial<State>, options?: BaseOptions): void;
-    changeConfigs(_config: Partial<Config>, userAction?: boolean): void;
+    setState(state: PartialDeep<State>, options?: BaseOptions): void;
+    changeConfigs(config: Partial<Config>, userAction?: boolean): void;
     /** 更新户型图大小 */
     updateSize: () => void;
     protected formatData(serverData: PluginServerData): Promise<PluginData>;

package/dist/CruisePlugin/floorplan/ModelFloorplanPlugin/typing.d.ts

@@ -21,6 +21,12 @@ export interface Config {
     ruleLabelsEnable: boolean;
     /** 是否要启用户型图分间标签功能，默认为 true */
     roomLabelsEnable: boolean;
+    /** 是否支持房屋标签自适应展示，默认为 true
+     * @description
+     * * 标签边框超过房间边框时，自动隐藏；不超过时自动展示。
+     * * 鼠标 hover 时，自动展示。
+     * */
+    adaptiveRoomLabelVisibleEnable: boolean;
     /** 自定义「雷达」图标 */
     cameraImageUrl: string;
     /** 计算户型图大小时，以模型的哪个高度为依据，默认为 BOUNDING_CENTER
@@ -31,12 +37,14 @@ export interface Config {
     attachedTo: FLOOR_PLAN_ATTACHED_TO;
     /** 分间标签的自定义函数，通过返回自定义 DOM 替换对应分间的标签 */
     getLabelElement: undefined | ((room: FloorplanRoomItem) => Element | null);
-    /** 是否支持房屋标签自适应展示，默认为 true
-     * @description
-     * * 标签边框超过房间边框时，自动隐藏；不超过时自动展示。
-     * * 鼠标 hover 时，自动展示。
-     * */
-    adaptiveRoomLabelVisibleEnable: boolean;
+    /** 自定义分间面积文本
+     * @param area 分间原始面积，单位是 mm²
+     */
+    getRoomAreaText: (areaSize: number) => string;
+    /** 自定义标尺距离文本
+     * @param distance 原始标尺距离，单位是 mm
+     */
+    getRuleDistanceText: (distance: number) => string;
 }
 export interface Parameters extends Partial<Config> {
     selector?: string | Element;
@@ -80,7 +88,7 @@ export interface EventMap extends BasePlugin.EventMap<State, FloorplanData> {
      * 点击户型图的回调
      * @return 当返回 false 时，会阻止默认行为
      */
-    click: () => boolean | void;
+    click: () => boolean | undefined;
 }
 export interface PluginServerData extends BasePlugin.ServerData {
     version: number;

package/dist/CruisePlugin/index.js

@@ -4,9 +4,6 @@ Object.defineProperty(exports, '__esModule', { value: true });
 
 var five = require('@realsee/five');
 var THREE = require('three');
-var getNormals = require('polyline-normals');
-
-function _interopDefaultLegacy (e) { return e && typeof e === 'object' && 'default' in e ? e : { 'default': e }; }
 
 function _interopNamespace(e) {
     if (e && e.__esModule) return e;
@@ -27,7 +24,6 @@ function _interopNamespace(e) {
 }
 
 var THREE__namespace = /*#__PURE__*/_interopNamespace(THREE);
-var getNormals__default = /*#__PURE__*/_interopDefaultLegacy(getNormals);
 
 /**
  * plugin 的基本控制器
@@ -62,6 +58,193 @@ class Controller$2 {
 class Controller$1 extends Controller$2 {
 }
 
+var polylineMiterUtil = {};
+
+var add_1 = add$1;
+
+/**
+ * Adds two vec2's
+ *
+ * @param {vec2} out the receiving vector
+ * @param {vec2} a the first operand
+ * @param {vec2} b the second operand
+ * @returns {vec2} out
+ */
+function add$1(out, a, b) {
+    out[0] = a[0] + b[0];
+    out[1] = a[1] + b[1];
+    return out
+}
+
+var set_1 = set$1;
+
+/**
+ * Set the components of a vec2 to the given values
+ *
+ * @param {vec2} out the receiving vector
+ * @param {Number} x X component
+ * @param {Number} y Y component
+ * @returns {vec2} out
+ */
+function set$1(out, x, y) {
+    out[0] = x;
+    out[1] = y;
+    return out
+}
+
+var normalize_1 = normalize$1;
+
+/**
+ * Normalize a vec2
+ *
+ * @param {vec2} out the receiving vector
+ * @param {vec2} a vector to normalize
+ * @returns {vec2} out
+ */
+function normalize$1(out, a) {
+    var x = a[0],
+        y = a[1];
+    var len = x*x + y*y;
+    if (len > 0) {
+        //TODO: evaluate use of glm_invsqrt here?
+        len = 1 / Math.sqrt(len);
+        out[0] = a[0] * len;
+        out[1] = a[1] * len;
+    }
+    return out
+}
+
+var subtract_1 = subtract$1;
+
+/**
+ * Subtracts vector b from vector a
+ *
+ * @param {vec2} out the receiving vector
+ * @param {vec2} a the first operand
+ * @param {vec2} b the second operand
+ * @returns {vec2} out
+ */
+function subtract$1(out, a, b) {
+    out[0] = a[0] - b[0];
+    out[1] = a[1] - b[1];
+    return out
+}
+
+var dot_1 = dot$1;
+
+/**
+ * Calculates the dot product of two vec2's
+ *
+ * @param {vec2} a the first operand
+ * @param {vec2} b the second operand
+ * @returns {Number} dot product of a and b
+ */
+function dot$1(a, b) {
+    return a[0] * b[0] + a[1] * b[1]
+}
+
+var add = add_1;
+var set = set_1;
+var normalize = normalize_1;
+var subtract = subtract_1;
+var dot = dot_1;
+
+var tmp = [0, 0];
+
+polylineMiterUtil.computeMiter = function computeMiter(tangent, miter, lineA, lineB, halfThick) {
+    //get tangent line
+    add(tangent, lineA, lineB);
+    normalize(tangent, tangent);
+
+    //get miter as a unit vector
+    set(miter, -tangent[1], tangent[0]);
+    set(tmp, -lineA[1], lineA[0]);
+
+    //get the necessary length of our miter
+    return halfThick / dot(miter, tmp)
+};
+
+polylineMiterUtil.normal = function normal(out, dir) {
+    //get perpendicular
+    set(out, -dir[1], dir[0]);
+    return out
+};
+
+polylineMiterUtil.direction = function direction(out, a, b) {
+    //get unit dir of two lines
+    subtract(out, a, b);
+    normalize(out, out);
+    return out
+};
+
+var util = polylineMiterUtil;
+
+var lineA = [0, 0];
+var lineB = [0, 0];
+var tangent = [0, 0];
+var miter = [0, 0];
+
+var polylineNormals = function(points, closed) {
+    var curNormal = null;
+    var out = [];
+    if (closed) {
+        points = points.slice();
+        points.push(points[0]);
+    }
+
+    var total = points.length;
+    for (var i=1; i<total; i++) {
+        var last = points[i-1];
+        var cur = points[i];
+        var next = i<points.length-1 ? points[i+1] : null;
+
+        util.direction(lineA, cur, last);
+        if (!curNormal)  {
+            curNormal = [0, 0];
+            util.normal(curNormal, lineA);
+        }
+
+        if (i === 1) //add initial normals
+            addNext(out, curNormal, 1);
+
+        if (!next) { //no miter, simple segment
+            util.normal(curNormal, lineA); //reset normal
+            addNext(out, curNormal, 1);
+        } else { //miter with last
+            //get unit dir of next line
+            util.direction(lineB, next, cur);
+
+            //stores tangent & miter
+            var miterLen = util.computeMiter(tangent, miter, lineA, lineB, 1);
+            addNext(out, miter, miterLen);
+        }
+    }
+
+    //if the polyline is a closed loop, clean up the last normal
+    if (points.length > 2 && closed) {
+        var last2 = points[total-2];
+        var cur2 = points[0];
+        var next2 = points[1];
+
+        util.direction(lineA, cur2, last2);
+        util.direction(lineB, next2, cur2);
+        util.normal(curNormal, lineA);
+        
+        var miterLen2 = util.computeMiter(tangent, miter, lineA, lineB, 1);
+        out[0][0] = miter.slice();
+        out[total-1][0] = miter.slice();
+        out[0][1] = miterLen2;
+        out[total-1][1] = miterLen2;
+        out.pop();
+    }
+
+    return out
+};
+
+function addNext(out, normal, length) {
+    out.push([[normal[0], normal[1]], length]);
+}
+
 // 定义常量
 const TRIANGLE_NUMBER_OF_RECTANGLE = 2; // 每个矩形有两个三角形
 const VERTEX_NUMBER_OF_TRIANGLE = 3; // 每个三角形有三个顶点
@@ -179,7 +362,7 @@ function getLineGeometry(curvePoints, unitWidth, unitHeight) {
     const halfUnitWidth = unitWidth / 2;
     const aspect = unitHeight / unitWidth; // 纵横比 height / width
     const curvePointsLength = curvePoints.length;
-    const normals = getNormals__default["default"](curvePoints.map((p) => [p.x, p.z])); // curvePoints：每个点切线的向量「二维」
+    const normals = polylineNormals(curvePoints.map((p) => [p.x, p.z])); // curvePoints：每个点切线的向量「二维」
     const rectangleNumber = curvePoints.length - 1; // 曲线上 N 个点，构成了 N - 1 个矩形
     const indexNumber = rectangleNumber * TRIANGLE_NUMBER_OF_RECTANGLE * VERTEX_NUMBER_OF_TRIANGLE;
     const verticesNumber = 2 * curvePointsLength; // 顶点数量（包含公用）：每个曲线点对应两个顶点，N 个 点有 2N 个顶点

package/dist/GuideLinePlugin/ItemLabelPlugin/utils/isImpacted.d.ts

@@ -1,6 +1,8 @@
 import * as THREE from 'three';
 import type { Five } from "@realsee/five";
+declare const Vector3: typeof THREE.Vector3;
 /**
  * 碰撞检测可见性
  * */
 export declare const isImpacted: (five: Five, sourceVector: THREE.Vector3, targetVector: THREE.Vector3, distance: number) => boolean;
+export {};

package/dist/GuideLinePlugin/PanoMeasurePlugin/Controller/BaseController.d.ts

@@ -1,16 +1,18 @@
-import type Line from '../Model/line';
 import type Magnifier from '../Modules/Magnifier';
 import type FiveHelper from '../Modules/FiveHelper';
 import type { Group } from 'three';
 import type { Model } from '../Model';
+import type { Config } from '../typings';
 import type { PanoMeasurePluginEvent } from '../typings/event.type';
 import type { UserDistanceItem } from '../utils/distanceDom';
 import type { Five, Intersection, IntersectMeshInterface, Subscribe } from '@realsee/five';
 import type { OpenParameter } from '../typings/data';
+import Line from '../Model/line';
 export interface IControllerParams {
     five: Five;
     group: Group;
     model: Model;
+    config: Config;
     mouseGroup: Group;
     container: Element;
     magnifier: Magnifier;
@@ -19,10 +21,12 @@ export interface IControllerParams {
     hook: Subscribe<PanoMeasurePluginEvent>;
     userDistanceItemCreator?: () => UserDistanceItem;
 }
-export default abstract class BaseController {
+export default class BaseController {
+    model: Model;
     protected five: Five;
     protected group: Group;
-    protected model: Model;
+    protected config: Config;
+    protected dashed: Line;
     protected disposed: boolean;
     protected isMobile: boolean;
     protected mouseGroup: Group;
@@ -32,8 +36,8 @@ export default abstract class BaseController {
     protected magnifier: IControllerParams['magnifier'];
     protected userDistanceItemCreator: IControllerParams['userDistanceItemCreator'];
     constructor(params: IControllerParams);
+    updateDistanceUI: () => void;
     protected removeLine(line: Line): void;
-    protected updateDistanceUI: () => void;
     protected updateMouseGroup(intersection: Intersection, mesh?: IntersectMeshInterface): Group;
     protected dispose(): void;
 }

package/dist/GuideLinePlugin/PanoMeasurePlugin/Controller/EditController.d.ts

@@ -1,5 +1,4 @@
 import type { LineJson } from '../typings/data';
-import { Model } from '../Model';
 import Line from '../Model/line';
 import BaseController, { IControllerParams } from './BaseController';
 export interface EditEvent {
@@ -7,15 +6,12 @@ export interface EditEvent {
 }
 export default class EditController extends BaseController {
     type: string;
-    model: Model;
     private pressPoint?;
     private hasAppendDashed;
     private hasAppendMouseGroup;
     private fiveElement?;
     /** 上一个端点位置 */
     private lastPoint;
-    /** 鼠标点到上一个端点连接的虚线 */
-    private dashed;
     private hammer?;
     /** 根据 intersection 更新放大镜和吸附点 */
     private onIntersectionUpdate;

package/dist/GuideLinePlugin/PanoMeasurePlugin/Controller/MixedController.d.ts

@@ -15,8 +15,6 @@ export default class MixedController extends BaseController {
     private mobileNowPoint;
     private highlightedLines;
     private deleteDom;
-    /** 圆环点到上一个端点连接的虚线 */
-    private dashed;
     constructor(params: IControllerParams);
     dispose(): void;
     highlightLine(line: Line): void;

package/dist/GuideLinePlugin/PanoMeasurePlugin/Controller/index.d.ts

@@ -1,10 +1,11 @@
+import type { Config } from '../typings';
 import type { OpenParameter, PluginData } from '../typings/data';
 import type { PanoMeasurePluginEvent } from '../typings/event.type';
 import type { UserDistanceItem } from '../utils/distanceDom';
 import Magnifier, { MagnifierParameter } from '../Modules/Magnifier';
 import { Five, Subscribe } from '@realsee/five';
 export declare type Mode = 'Watch' | 'Edit' | 'Mixed' | 'View';
-export interface PanoMeasureParameterType {
+export interface PanoMeasureParameterType extends Partial<Config> {
     openParams?: OpenParameter;
     magnifierParams?: MagnifierParameter;
     useUIController?: boolean;
@@ -18,6 +19,7 @@ export default class MeasureController {
     private five;
     private model;
     private group;
+    private config;
     private fiveHelper;
     private useUIController?;
     private params;
@@ -67,4 +69,5 @@ export default class MeasureController {
      * @param isMobile true为移动端模式，false为pc端
      */
     changeIsMobile(isMobile: boolean): void;
+    changeConfigs(config: Partial<Config>): void;
 }

package/dist/GuideLinePlugin/PanoMeasurePlugin/Model/index.d.ts

@@ -1,5 +1,5 @@
+import type { Config } from '../typings';
 import type { PluginData } from '../typings/data';
-import type { UserDistanceItem } from '../utils/distanceDom';
 import Line from './line';
 import Point from './point';
 import { Subscribe, SubscribeEventMap } from '@realsee/five';
@@ -14,16 +14,13 @@ interface IModelEvent extends SubscribeEventMap {
      */
     lineRemoved: (lines: Line) => void;
 }
-export interface ModelParams {
-    userDistanceItemCreator?: () => UserDistanceItem;
-}
 export declare class Model {
     readonly lines: Line[];
     readonly points: Point[];
-    readonly params: ModelParams;
+    readonly params: Config;
     readonly polylines: Polyline[];
     readonly hook: Subscribe<IModelEvent>;
-    constructor(params: ModelParams);
+    constructor(params: Config);
     addLine(line: Line): this;
     removeLineByID(lineID: string): void;
     removeLine(line: Line): this;

package/dist/GuideLinePlugin/PanoMeasurePlugin/typings/index.d.ts

@@ -0,0 +1,8 @@
+import type { UserDistanceItem } from '../utils/distanceDom';
+export interface Config {
+    userDistanceItemCreator: undefined | (() => UserDistanceItem);
+    /** 展示 distance DOM 时，使用的转换函数
+     * @param distance 单位是 m
+     */
+    getDistanceText: (distance: number) => string;
+}

package/dist/GuideLinePlugin/PanoMeasurePlugin/utils/distanceDom.d.ts

@@ -12,12 +12,12 @@ export interface UserDistanceItem {
         polyline: PolylineCompletelyJson;
     }) => void;
 }
-export interface IDistanceItemProps {
+export interface CreateDistanceItemProps {
     line: Line;
     userDistanceItem?: UserDistanceItem;
     clickCallback?: (item: DistanceItem) => unknown;
 }
-export declare function createDistanceItem(props: IDistanceItemProps): {
+export declare function createDistanceItem(props: CreateDistanceItemProps): {
     lineID: string;
     ndcPosition: Vector3;
     update: (five: Five) => void;

package/dist/GuideLinePlugin/PanoRulerPlugin/Plugin.d.ts

@@ -1,7 +1,9 @@
 import type { FivePlugin } from '@realsee/five';
 import type { RoomInfo, RoomRules } from './typings';
-export interface PanoRulerPluginOptions {
-    distanceText?: (distance: number) => string;
+interface PanoRulerPluginConfig {
+    distanceText: (distance: number) => string;
+}
+export interface PanoRulerPluginOptions extends Partial<PanoRulerPluginConfig> {
     className?: string;
 }
 interface PanoRulerPluginPluginState {
@@ -19,6 +21,7 @@ export interface PanoRulerPluginExportType {
     disable: () => void;
     load: (roomInfo?: RoomInfo, roomRules?: RoomRules, options?: PanoRulerPluginOptions) => Promise<boolean>;
     state: PanoRulerPluginPluginState;
+    changeConfigs: (config: Partial<PanoRulerPluginConfig>) => void;
 }
 /**
  * 全景标尺插件

package/dist/GuideLinePlugin/floorplan/ModelFloorplanPlugin/Controller.d.ts

@@ -1,3 +1,4 @@
+import type { PartialDeep } from 'type-fest';
 import type { BaseOptions } from '../../base/BasePlugin';
 import type { Five } from '@realsee/five';
 import type { ShowState } from '../utils/correctFiveState';
@@ -56,8 +57,8 @@ export declare class Controller extends BasePlugin.Controller<State, EventMap, P
     /** 隐藏户型图 */
     hide: (options?: Partial<HideOptions>) => Promise<void>;
     /** 更改插件 State */
-    setState(state: Partial<State>, options?: BaseOptions): void;
-    changeConfigs(_config: Partial<Config>, userAction?: boolean): void;
+    setState(state: PartialDeep<State>, options?: BaseOptions): void;
+    changeConfigs(config: Partial<Config>, userAction?: boolean): void;
     /** 更新户型图大小 */
     updateSize: () => void;
     protected formatData(serverData: PluginServerData): Promise<PluginData>;

package/dist/GuideLinePlugin/floorplan/ModelFloorplanPlugin/typing.d.ts

@@ -21,6 +21,12 @@ export interface Config {
     ruleLabelsEnable: boolean;
     /** 是否要启用户型图分间标签功能，默认为 true */
     roomLabelsEnable: boolean;
+    /** 是否支持房屋标签自适应展示，默认为 true
+     * @description
+     * * 标签边框超过房间边框时，自动隐藏；不超过时自动展示。
+     * * 鼠标 hover 时，自动展示。
+     * */
+    adaptiveRoomLabelVisibleEnable: boolean;
     /** 自定义「雷达」图标 */
     cameraImageUrl: string;
     /** 计算户型图大小时，以模型的哪个高度为依据，默认为 BOUNDING_CENTER
@@ -31,12 +37,14 @@ export interface Config {
     attachedTo: FLOOR_PLAN_ATTACHED_TO;
     /** 分间标签的自定义函数，通过返回自定义 DOM 替换对应分间的标签 */
     getLabelElement: undefined | ((room: FloorplanRoomItem) => Element | null);
-    /** 是否支持房屋标签自适应展示，默认为 true
-     * @description
-     * * 标签边框超过房间边框时，自动隐藏；不超过时自动展示。
-     * * 鼠标 hover 时，自动展示。
-     * */
-    adaptiveRoomLabelVisibleEnable: boolean;
+    /** 自定义分间面积文本
+     * @param area 分间原始面积，单位是 mm²
+     */
+    getRoomAreaText: (areaSize: number) => string;
+    /** 自定义标尺距离文本
+     * @param distance 原始标尺距离，单位是 mm
+     */
+    getRuleDistanceText: (distance: number) => string;
 }
 export interface Parameters extends Partial<Config> {
     selector?: string | Element;
@@ -80,7 +88,7 @@ export interface EventMap extends BasePlugin.EventMap<State, FloorplanData> {
      * 点击户型图的回调
      * @return 当返回 false 时，会阻止默认行为
      */
-    click: () => boolean | void;
+    click: () => boolean | undefined;
 }
 export interface PluginServerData extends BasePlugin.ServerData {
     version: number;