@react-native-ohos/react-native-svg 15.0.2-rc.5 → 15.12.1-rc.10

package/harmony/svg/src/main/cpp/properties/PaintState.h

@@ -0,0 +1,240 @@
+/*
+ * Copyright (c) 2024 Huawei Device Co., Ltd. All rights reserved
+ * Use of this source code is governed by a MIT license that can be
+ * found in the LICENSE file.
+ *
+ * This file incorporates from the OpenHarmony project, licensed under
+ * the Apache License, Version 2.0. Specifically:
+ * - [OpenHarmony/arkui_ace_engine] (https://gitee.com/openharmony/arkui_ace_engine)
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License"); you may not
+ * use this file except in compliance with the License. You may obtain a copy
+ * of the License at:
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ */
+
+// from ArkUI "frameworks/core/components/common/properties/paint_state.h"
+#pragma once
+
+#include "properties/Color.h"
+#include "utils/SvgUtils.h"
+
+
+namespace rnoh {
+namespace svg {
+
+struct BezierCurveParam {
+    double cp1x = 0.0; // first bezier point x
+    double cp1y = 0.0; // first bezier point y
+    double cp2x = 0.0; // second bezier point x
+    double cp2y = 0.0; // second bezier point y
+    double x = 0.0;    // end point x
+    double y = 0.0;    // end point y
+};
+
+struct QuadraticCurveParam {
+    double cpx = 0.0; // bezier point x
+    double cpy = 0.0; // bezier point y
+    double x = 0.0;   // end point x
+    double y = 0.0;   // end point y
+};
+
+struct ArcParam {
+    double x = 0.0;             // point x of the circle
+    double y = 0.0;             // point y of the circle
+    double radius = 0.0;        // radius of the circle
+    double startAngle = 0.0;    // start angle of the circle
+    double endAngle = 0.0;      // end angle of the circle
+    bool anticlockwise = false; // is draw clock wise or not
+};
+
+struct ArcToParam {
+    double x1 = 0.0;     // start point x
+    double y1 = 0.0;     // start point y
+    double x2 = 0.0;     // end point x
+    double y2 = 0.0;     // end point y
+    double radius = 0.0; // radius of the circle
+};
+
+struct EllipseParam {
+    double x = 0.0;             // point x of the ellipse
+    double y = 0.0;             // point y of the ellipse
+    double radiusX = 0.0;       // x axis radius of the ellipse
+    double radiusY = 0.0;       // y axis radius of the ellipse
+    double rotation = 0.0;      // rotation angle of the ellipse
+    double startAngle = 0.0;    // start angle of the ellipse
+    double endAngle = 0.0;      // end angle of the ellipse
+    bool anticlockwise = false; // is draw clock wise or not
+};
+
+struct TransformParam {
+    double scaleX = 0.0;
+    double skewX = 0.0;
+    double skewY = 0.0;
+    double scaleY = 0.0;
+    double translateX = 0.0;
+    double translateY = 0.0;
+};
+
+struct LineDashParam {
+    std::vector<double> lineDash;
+    double dashOffset = 0.0;
+};
+
+struct CanvasImage {
+    int32_t flag = 0;
+    double sx = 0.0;
+    double sy = 0.0;
+    double sWidth = 0.0;
+    double sHeight = 0.0;
+    double dx = 0.0;
+    double dy = 0.0;
+    double dWidth = 0.0;
+    double dHeight = 0.0;
+    std::string src;
+    int32_t instanceId = 0;
+};
+
+struct TextMetrics {
+    double width = 0;
+    double height = 0;
+    double actualBoundingBoxLeft = 0;
+    double actualBoundingBoxRight = 0;
+    double actualBoundingBoxAscent = 0;
+    double actualBoundingBoxDescent = 0;
+    double alphabeticBaseline = 0;
+    double emHeightAscent = 0;
+    double emHeightDescent = 0;
+    double fontBoundingBoxAscent = 0;
+    double fontBoundingBoxDescent = 0;
+    double hangingBaseline = 0;
+    double ideographicBaseline = 0;
+};
+
+enum class ContextType {
+    RENDER_2D,
+    RENDER_3D,
+};
+
+enum class CanvasUnit {
+    DEFAULT = 0,
+    PX,
+};
+
+// following the definition of FillType in skPath
+enum class CanvasFillRule {
+    NONZERO = 0,
+    EVENODD,
+};
+
+// following the definition in skPaint
+enum class LineCapStyle {
+    BUTT = 0,
+    ROUND,
+    SQUARE,
+};
+
+enum class LineJoinStyle {
+    MITER = 0,
+    ROUND,
+    BEVEL,
+};
+
+enum class CompositeOperation {
+    SOURCE_OVER = 0,
+    SOURCE_ATOP,
+    SOURCE_IN,
+    SOURCE_OUT,
+    DESTINATION_OVER,
+    DESTINATION_ATOP,
+    DESTINATION_IN,
+    DESTINATION_OUT,
+    LIGHTER,
+    COPY,
+    XOR,
+};
+
+enum class PaintStyle { NONE = 0, Color, Gradient, ImagePattern };
+
+class PaintState {
+public:
+    const Color &GetColor() const { return color_; }
+
+    void SetColor(const Color &color) {
+        paintStyle_ = PaintStyle::Color;
+        color_ = color;
+    }
+
+    int32_t GetId() const { return id_; }
+
+    void SetId(int32_t id) { id_ = id; }
+
+    PaintStyle GetPaintStyle() const { return paintStyle_; }
+
+protected:
+    Color color_ = Color::BLACK;
+    int32_t id_ = 0;
+    PaintStyle paintStyle_ = PaintStyle::Color;
+};
+
+class StrokePaintState : public PaintState {
+public:
+    LineCapStyle GetLineCap() const { return lineCap_; }
+
+    void SetLineCap(LineCapStyle lineCap) { lineCap_ = lineCap; }
+
+    LineJoinStyle GetLineJoin() const { return lineJoin_; }
+
+    void SetLineJoin(LineJoinStyle lineJoin) { lineJoin_ = lineJoin; }
+
+    double GetLineWidth() const { return lineWidth_; }
+
+    void SetLineWidth(double lineWidth) { lineWidth_ = lineWidth; }
+
+    double GetMiterLimit() const { return miterLimit_; }
+
+    void SetMiterLimit(double miterLimit) { miterLimit_ = miterLimit; }
+
+    LineDashParam GetLineDash() const { return lineDash_; }
+
+    void SetLineDash(const LineDashParam &lineDash) { lineDash_ = lineDash; }
+
+    void SetLineDashOffset(double offset) { lineDash_.dashOffset = offset; }
+
+    void SetLineDash(const std::vector<double> &segments) { lineDash_.lineDash = segments; }
+
+private:
+    LineCapStyle lineCap_ = LineCapStyle::BUTT;
+    LineJoinStyle lineJoin_ = LineJoinStyle::MITER;
+
+    double lineWidth_ = 1.0; // default lineWidth
+
+    double miterLimit_ = 10.0; // default miterLimit
+    LineDashParam lineDash_;
+};
+
+class GlobalPaintState {
+public:
+    double GetAlpha() const { return alpha_; }
+
+    void SetAlpha(double alpha) { alpha_ = alpha; }
+
+    CompositeOperation GetType() const { return type_; }
+
+    void SetType(CompositeOperation type) { type_ = type; }
+
+    bool HasGlobalAlpha() const { return !NearEqual(alpha_, -1.0); }
+
+private:
+    double alpha_ = -1.0;
+    CompositeOperation type_ = CompositeOperation::SOURCE_OVER;
+};
+
+} // namespace svg
+} // namespace rnoh

package/harmony/svg/src/main/cpp/properties/Rect.h

@@ -0,0 +1,423 @@
+/*
+ * Copyright (c) 2024 Huawei Device Co., Ltd. All rights reserved
+ * Use of this source code is governed by a MIT license that can be
+ * found in the LICENSE file.
+ *
+ * This file incorporates from the OpenHarmony project, licensed under
+ * the Apache License, Version 2.0. Specifically:
+ * - [OpenHarmony/arkui_ace_engine] (https://gitee.com/openharmony/arkui_ace_engine)
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License"); you may not
+ * use this file except in compliance with the License. You may obtain a copy
+ * of the License at:
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ */
+
+// from ArkUI "frameworks/base/geometry/rect.h"
+#pragma once
+
+#include <algorithm>
+#include "properties/Size.h"
+#include "utils/SvgUtils.h"
+#include "properties/Offset.h"
+
+namespace rnoh {
+namespace svg {
+
+class Rect {
+public:
+    Rect() = default;
+    ~Rect() = default;
+
+    Rect(double x, double y, double width, double height)
+    {
+        SetRect(x, y, width, height);
+    }
+
+    Rect(const Offset& offset, const Size& size)
+    {
+        SetOffset(offset);
+        SetSize(size);
+    }
+
+    void SetRect(double x, double y, double width, double height)
+    {
+        x_ = x;
+        y_ = y;
+        width_ = width;
+        height_ = height;
+    }
+
+    void SetRect(const Offset& offset, const Size& size)
+    {
+        SetOffset(offset);
+        SetSize(size);
+    }
+
+    void ApplyScale(double scale)
+    {
+        x_ *= scale;
+        y_ *= scale;
+        width_ *= scale;
+        height_ *= scale;
+    }
+
+    void ApplyScaleAndRound(const Size& scale)
+    {
+        x_ = round(x_ * scale.Width());
+        y_ = round(y_ * scale.Height());
+        width_ = round(width_ * scale.Width());
+        height_ = round(height_ * scale.Height());
+    }
+
+    double Left() const
+    {
+        return GreatNotEqual(width_, 0.0) ? x_ : x_ + width_;
+    }
+
+    double Top() const
+    {
+        return GreatNotEqual(height_, 0.0) ? y_ : y_ + height_;
+    }
+
+    double Right() const
+    {
+        return GreatNotEqual(width_, 0.0) ? x_ + width_ : x_;
+    }
+
+    double Bottom() const
+    {
+        return GreatNotEqual(height_, 0.0) ? y_ + height_ : y_;
+    }
+
+    double Width() const
+    {
+        return width_;
+    }
+
+    double Height() const
+    {
+        return height_;
+    }
+
+    void SetSize(const Size& size)
+    {
+        width_ = size.Width();
+        height_ = size.Height();
+    }
+
+    Size GetSize() const
+    {
+        return Size(width_, height_);
+    }
+
+    void SetOffset(const Offset& offset)
+    {
+        x_ = offset.GetX();
+        y_ = offset.GetY();
+    }
+
+    Offset GetOffset() const
+    {
+        return Offset(x_, y_);
+    }
+
+    void SetLeft(double left)
+    {
+        x_ = left;
+    }
+
+    void SetTop(double top)
+    {
+        y_ = top;
+    }
+
+    void SetWidth(double width)
+    {
+        width_ = width;
+    }
+
+    void SetHeight(double height)
+    {
+        height_ = height;
+    }
+
+//     bool IsInRegion(const Point& point) const
+//     {
+//         return (point.GetX() >= x_) && (point.GetX() < (x_ + width_)) && (point.GetY() >= y_) &&
+//                (point.GetY() < (y_ + height_));
+//     }
+
+    bool IsWrappedBy(const Rect& other) const
+    {
+        return (Left() >= other.Left()) && (Right() <= other.Right()) && (Top() >= other.Top()) &&
+               (Bottom() <= other.Bottom());
+    }
+
+    bool IsValid() const
+    {
+        return width_ > 0.0 && height_ > 0.0;
+    }
+
+    Rect Constrain(const Rect& other)
+    {
+        double right = Right();
+        double bottom = Bottom();
+        double left = std::clamp(x_, other.Left(), other.Right());
+        double top = std::clamp(y_, other.Top(), other.Bottom());
+        right = std::clamp(right, other.Left(), other.Right()) - left;
+        bottom = std::clamp(bottom, other.Top(), other.Bottom()) - top;
+        return Rect(left, top, right, bottom);
+    }
+
+    Rect& operator+=(const Offset& offset)
+    {
+        x_ += offset.GetX();
+        y_ += offset.GetY();
+        return *this;
+    }
+
+    Rect& operator-=(const Offset& offset)
+    {
+        x_ -= offset.GetX();
+        y_ -= offset.GetY();
+        return *this;
+    }
+
+    Rect& operator+=(const Size& size)
+    {
+        width_ += size.Width();
+        height_ += size.Height();
+        return *this;
+    }
+
+    Rect& operator-=(const Size& size)
+    {
+        width_ -= size.Width();
+        height_ -= size.Height();
+        return *this;
+    }
+
+    Rect operator+(const Offset& offset) const
+    {
+        return Rect(x_ + offset.GetX(), y_ + offset.GetY(), width_, height_);
+    }
+
+    Rect operator-(const Offset& offset) const
+    {
+        return Rect(x_ - offset.GetX(), y_ - offset.GetY(), width_, height_);
+    }
+
+    Rect operator+(const Size& size) const
+    {
+        return Rect(x_, y_, width_ + size.Width(), height_ + size.Height());
+    }
+
+    Rect operator-(const Size& size) const
+    {
+        return Rect(x_, y_, width_ - size.Width(), height_ - size.Height());
+    }
+
+    Rect operator*(double scale) const
+    {
+        return Rect(x_ * scale, y_ * scale, width_ * scale, height_ * scale);
+    }
+
+    bool operator==(const Rect& rect) const
+    {
+        return (GetOffset() == rect.GetOffset()) && (GetSize() == rect.GetSize());
+    }
+
+    bool operator!=(const Rect& rect) const
+    {
+        return !operator==(rect);
+    }
+
+    bool IsIntersectWith(const Rect& other) const
+    {
+        return !(other.Right() < Left() || other.Left() > Right() || other.Bottom() < Top() || other.Top() > Bottom());
+    }
+
+    bool IsIntersectByCommonSideWith(const Rect& other) const
+    {
+        return !(
+            other.Right() <= Left() || other.Left() >= Right() || other.Bottom() <= Top() || other.Top() >= Bottom());
+    }
+
+    Rect IntersectRect(const Rect& other) const
+    {
+        double left = std::max(Left(), other.Left());
+        double right = std::min(Right(), other.Right());
+        double top = std::max(Top(), other.Top());
+        double bottom = std::min(Bottom(), other.Bottom());
+        return Rect(left, top, right - left, bottom - top);
+    }
+
+    Rect CombineRect(const Rect& other) const
+    {
+        double left = std::min(Left(), other.Left());
+        double right = std::max(Right(), other.Right());
+        double top = std::min(Top(), other.Top());
+        double bottom = std::max(Bottom(), other.Bottom());
+        return Rect(left, top, right - left, bottom - top);
+    }
+
+    /**
+     * @brief Magnetically attracted to a "magnetic" rect.
+     *
+     * Let's show some cases to illustrate how this method works:
+     *
+     * Case 1 : Inside. Rect won't be move because it is already attracted by magnet.
+     * Result: Offset(0, 0)
+     *
+     * +-----------------------------+
+     * |                             |
+     * |   Magnetical Rect           |
+     * |                             |
+     * |          +-------+          |
+     * |          |  R    |          |
+     * |          |       |          |
+     * |          +-------+          |
+     * +-----------------------------+
+     *
+     * Case 2: Outside. R will be attracted to position R'
+     * Result: Offset(-12, -3)
+     *
+     * +-----------------------+
+     * |                       |
+     * |   Magnetical Rect  +--+
+     * |                    |  |
+     * |                    |R'|        +--+
+     * +-----------------------+        |R |
+     *                                  |  |
+     *                                  +--+
+     *
+     * Case 3: Half Inside. R will be moved totally into magnet.
+     * Result: Offset(-8, 0)
+     *
+     * +-----------------------------+                  +-----------------------------+
+     * |                             |                  |                             |
+     * |   Magnetical Rect           |   +---------->   |   Magnetical Rect           |
+     * |                             |                  |                             |
+     * |                          +----------+          |                  +----------+
+     * |                          |  |   R   |          |                  |   R'     |
+     * |                          +----------+          |                  +----------+
+     * |                             |                  |                             |
+     * +-----------------------------+                  +-----------------------------+
+     *
+     * Case 4: Outside or Half Outside but space not enough. R will be moved into magnet as more as possible.
+     * Result: Offset(0, 1)
+     *
+     *                    +--+
+     *                    |  |                                     +--+
+     *                    |R |                                     |  |
+     *                    |  |                                     |R'|
+     * +---------------------------+            +---------------------------+
+     * |                  |  |     |            |                  |  |     |
+     * | Magnetical Rect  |  |     |  +----->   | Magnetical Rect  |  |     |
+     * |                  +--+     |            |                  |  |     |
+     * +---------------------------+            +------------------+--+-----+
+     *
+     * Case 5: Totally Across magnet. Nothing should happen.
+     * Result: Offset(0, 0)
+     *
+     *                    +--+
+     *                    |  |
+     *                    |R |
+     *                    |  |
+     * +---------------------------+
+     * |                  |  |     |
+     * | Magnetical Rect  |  |     |
+     * |                  |  |     |
+     * +---------------------------+
+     *                    |  |
+     *                    +--+
+     *
+     * @param[in] magnet The magnetical rectangle.
+     *
+     * @return The offset that this rect need to moving into magnet.
+     */
+    Offset MagneticAttractedBy(const Rect& magnet)
+    {
+        Offset offset = Offset::Zero();
+        if (IsWrappedBy(magnet)) {
+            return Offset::Zero();
+        }
+
+        if (Left() < magnet.Left()) {
+            offset.SetX(std::max(0.0, std::min(magnet.Left() - Left(), magnet.Right() - Right())));
+        } else if (Right() > magnet.Right()) {
+            offset.SetX(std::min(0.0, std::max(magnet.Left() - Left(), magnet.Right() - Right())));
+        }
+
+        if (Top() < magnet.Top()) {
+            offset.SetY(std::max(0.0, std::min(magnet.Top() - Top(), magnet.Bottom() - Bottom())));
+        } else if (Bottom() > magnet.Bottom()) {
+            offset.SetY(std::min(0.0, std::max(magnet.Top() - Top(), magnet.Bottom() - Bottom())));
+        }
+
+        *this += offset;
+
+        return offset;
+    }
+
+    std::string ToString() const
+    {
+        std::stringstream ss;
+        ss << "Rect (" << std::fixed << std::setprecision(2) << x_ << ", " << y_ << ") - [";
+        if (NearEqual(width_, Size::INFINITE_SIZE)) {
+            ss << "INFINITE";
+        } else {
+            ss << width_;
+        }
+        ss << " x ";
+        if (NearEqual(height_, Size::INFINITE_SIZE)) {
+            ss << "INFINITE";
+        } else {
+            ss << height_;
+        }
+        ss << "]";
+        std::string output = ss.str();
+        return output;
+    }
+
+    std::string ToBounds() const
+    {
+        std::stringstream ss;
+        ss << "[" << std::fixed << std::setprecision(2) << x_ << ", " << y_ << "][";
+        if (NearEqual(width_, Size::INFINITE_SIZE)) {
+            ss << "INFINITE";
+        } else {
+            ss << (x_ + width_);
+        }
+        ss << ",";
+        if (NearEqual(height_, Size::INFINITE_SIZE)) {
+            ss << "INFINITE";
+        } else {
+            ss << (y_ + height_);
+        }
+        ss << "]";
+        std::string output = ss.str();
+        return output;
+    }
+
+    Offset Center() const
+    {
+        return Offset(width_ / 2.0 + x_, height_ / 2.0 + y_);
+    }
+
+private:
+    double x_ = 0.0;
+    double y_ = 0.0;
+    double width_ = 0.0;
+    double height_ = 0.0;
+};
+
+} // namespace svg
+} // namespace rnoh