@rdlabo/capacitor-brotherprint 0.0.2 → 2.0.0-0

package/ios/Pods/BRLMPrinterKit/BRLMPrinterKit/BRLMPrinterKit.framework/Headers/RJ3050AiPrintSettingsViewController.h

@@ -0,0 +1,42 @@
+//
+//  RJ3050AiPrintSettingsViewController.h
+//  BMSPrinterKit
+//
+//  Created by BMS on 1/30/13.
+//  Copyright (c) 2013 Brother Mobile Solutions. All rights reserved.
+//
+
+#import "GenericMobileLabelModelPrintSettingsViewController.h"
+#import "RJ3050AiPrintSettings.h"
+
+// This is the DEFAULT popup contentSize for RJ3050AiPrintSettingsViewController.
+//
+// You can override this by setting the "popoverSize" property (defined in the
+// PrintSettingsViewController superclass) to something different
+// before showing the ViewController.
+//
+// The popoverSize setting will be propagated to all of the "child" ViewControllers
+// of the main ViewController so all of the detail views will be the SAME size as each other.
+//
+// NOTE: iPad1 and iPad2 size = 1024 x 768, iPad3 = 2048 x 1536
+//#define RJ3050AiPOPUPCONTENTSIZE CGSizeMake(400,480)
+#define RJ3050AiPOPUPCONTENTSIZE CGSizeMake(400,548)
+#define RJ3050AiPOPUPCONTENTSIZE_IOS7 CGSizeMake(400,588)
+
+
+/*
+ This class is a subclass of GenericMobileLabelModelPrintSettingsViewController,
+ which implements all the major functionality.
+ 
+ *** SDK Users:  
+ DO NOT INSTANTIATE an instance of GenericMobileLabelModelPrintSettingsViewController.
+ Always instantiate a model-specific class, e.g. RJ3050AiPrintSettingsViewController
+ */
+
+@interface RJ3050AiPrintSettingsViewController : GenericMobileLabelModelPrintSettingsViewController
+{
+}
+
+@end
+
+

package/ios/Pods/BRLMPrinterKit/BRLMPrinterKit/BRLMPrinterKit.framework/Headers/RJ3050PrintSettings.h

@@ -0,0 +1,81 @@
+//
+//  RJ3050PrintSettings.h
+//  BMSPrinterKit
+//
+//  Created by BMS on 9/12/12.
+//  Copyright (c) 2012 Brother Mobile Solutions. All rights reserved.
+//
+
+#import "GenericMobileLabelModelPrintSettings.h"
+
+
+@interface RJ3050PrintSettings : GenericMobileLabelModelPrintSettings <PrintSettingsDelegate>
+
+// These definitions are provided for information only. DO NOT MODIFY!
+// spec section 4.3.1 Resolution
+#define RJ3050_RESOLUTION_HORZ 203
+#define RJ3050_RESOLUTION_VERT 203
+// spec section 4.3.6 Raster Line
+#define RJ3050_HEADSIZEDOTS 576
+// spec section "Select compression mode" command
+// NOTE: This should be same as HEADSIZEDOTS/8. And, it should be same as the # of decompressed bytes.
+#define RJ3050_MAX_COMPRESS_LENGTH 72
+
+// NOT in spec. *** Used Windows Printer Driver as reference ***
+// NOTE: MAXPAPERWIDTH DOES exceed HEADSIZEDOTS!!
+#define RJ3050_MIN_PAPERWIDTHDOTS (0.47F * RJ3050_RESOLUTION_HORZ) // 95
+#define RJ3050_MAX_PAPERWIDTHDOTS (3.15F * RJ3050_RESOLUTION_HORZ) // 639.
+// spec section 4.3.4 Maximum and Minimum Lengths
+#define RJ3050_MIN_PAPERLENGTHDOTS 96
+#define RJ3050_MAX_PAPERLENGTHDOTS 7992
+// spec section 4.3.3 Feed Amount
+#ifdef OLD
+// IMPORTANT NOTE: For LABEL papertype ONLY, we allow the MIN marginlengthdots to be set to 0.
+// That is, this MIN value here is ignored when papertype = label is specified.
+// Consider the case of a 1.0x0.5" label. A min margin of 0.12" will take up half of the printable length!!
+// This is why we will allow the margin to be set to 0 in this case.
+// Beware that some labels might clip the top if this is set to 0. But, other settings can be tweaked to
+// make it work (such as by setting a larger paperlength and setting the top margin to non-zero.)
+#define RJ3050_MIN_MARGINLENGTHDOTS 24
+
+#else
+// Allow 0 now for continuous roll too, as the Esc iUw command generated from this can affect AirPrint.
+// However, if this is 0, then the Esc id command will send 0 too. And, the printer may not eject the page
+// enough at the end. So, I am introducing the MIN_PAGEFEEDDOTS definition now, so that if current marginLengthDots
+// is LESS than MIN_PAGEFEEDDOTS, we will send Esc id command using the MIN_PAGEFEEDDOTS value instead.
+// Otherwise, the Esc id command will use the marginLengthDots value as it has in the past.
+//
+// NOTE: If this occurs, the final paper length after tear off will be up to 1/4" longer than the
+// specified paperLengthDots, because the print data will be (up to) the entire paper length, and then the
+// PAGEFEEDDOTS will be added to the final paper length. If you need a specific paperlength, then make sure
+// that marginLengthDots is >= MIN_PAGEFEEDDOTS.
+
+#define RJ3050_MIN_MARGINLENGTHDOTS 0
+// v2.3.0 UPDATE: Instead of forcing this MIN_PAGEFEEDDOTS value on EVERY page, which essentially PREVENTS a "no gap"
+// solution if the FW actually supports it, now we only force it on the LAST page, allowing a 0-margin between pages
+// in case the FW allows it. But, we will force this on the LAST page, to assure the FW will eject the page to tear off
+// in case it doesn't automatically behave that way.
+#define RJ3050_MIN_PAGEFEEDDOTS_LASTPAGE 24
+
+#endif
+
+#define RJ3050_MAX_MARGINLENGTHDOTS 1015
+// Arbitrarily restrict extraFeed to 11" at 203 dpi. There is no reason to be larger.
+#define RJ3050_MAX_EXTRAFEEDDOTS (11*RJ3050_RESOLUTION_VERT)
+
+//*** IMPORTANT ***
+// SDK Users:
+// You should NEVER instantiate an object of the GenericMobileLabelModelPrintSettings class.
+// Instead, you should instantiate one of the model-specific subclasses (i.e. RJ3050PrintSettings).
+//
+// For a list of important properties in the settings that your application needs to set,
+// refer to the GenericMobileLabelModelPrintSettings superclass.
+
+// SDK Designers:
+// The GenericMobileLabelModelPrintSettings class handles all the important work.
+// This subclass only needs to provide the model-specific data to the generic class.
+
+//*** ADDITIONAL PROPERTIES not handled by GenericMobileLabelModelPrintSettings
+@property (nonatomic, assign) BOOL invert180degrees;
+
+@end

package/ios/Pods/BRLMPrinterKit/BRLMPrinterKit/BRLMPrinterKit.framework/Headers/RJ3050PrintSettingsViewController.h

@@ -0,0 +1,42 @@
+//
+//  RJ3050PrintSettingsViewController.h
+//  BMSPrinterKit
+//
+//  Created by BMS on 1/30/13.
+//  Copyright (c) 2013 Brother Mobile Solutions. All rights reserved.
+//
+
+#import "GenericMobileLabelModelPrintSettingsViewController.h"
+#import "RJ3050PrintSettings.h"
+
+// This is the DEFAULT popup contentSize for RJ3050PrintSettingsViewController.
+//
+// You can override this by setting the "popoverSize" property (defined in the
+// PrintSettingsViewController superclass) to something different
+// before showing the ViewController.
+//
+// The popoverSize setting will be propagated to all of the "child" ViewControllers
+// of the main ViewController so all of the detail views will be the SAME size as each other.
+//
+// NOTE: iPad1 and iPad2 size = 1024 x 768, iPad3 = 2048 x 1536
+//#define RJ3050POPUPCONTENTSIZE CGSizeMake(400,480)
+#define RJ3050POPUPCONTENTSIZE CGSizeMake(400,548)
+#define RJ3050POPUPCONTENTSIZE_IOS7 CGSizeMake(400,588)
+
+
+/*
+ This class is a subclass of GenericMobileLabelModelPrintSettingsViewController,
+ which implements all the major functionality.
+ 
+ *** SDK Users:  
+ DO NOT INSTANTIATE an instance of GenericMobileLabelModelPrintSettingsViewController.
+ Always instantiate a model-specific class, e.g. RJ3050PrintSettingsViewController
+ */
+
+@interface RJ3050PrintSettingsViewController : GenericMobileLabelModelPrintSettingsViewController
+{
+}
+
+@end
+
+

package/ios/Pods/BRLMPrinterKit/BRLMPrinterKit/BRLMPrinterKit.framework/Headers/RJ3150AiPrintSettings.h

@@ -0,0 +1,82 @@
+//
+//  RJ3150AiPrintSettings.h
+//  BMSPrinterKit
+//
+//  Created by BMS on 9/12/12.
+//  Copyright (c) 2012 Brother Mobile Solutions. All rights reserved.
+//
+
+#import "GenericMobileLabelModelPrintSettings.h"
+
+
+@interface RJ3150AiPrintSettings : GenericMobileLabelModelPrintSettings <PrintSettingsDelegate>
+
+// These definitions are provided for information only. DO NOT MODIFY!
+// spec section 4.3.1 Resolution
+#define RJ3150Ai_RESOLUTION_HORZ 203
+#define RJ3150Ai_RESOLUTION_VERT 203
+// spec section 4.3.6 Raster Line
+#define RJ3150Ai_HEADSIZEDOTS 576
+// spec section "Select compression mode" command
+// NOTE: This should be same as HEADSIZEDOTS/8. And, it should be same as the # of decompressed bytes.
+#define RJ3150Ai_MAX_COMPRESS_LENGTH 72
+
+// NOT in spec. *** Used Windows Printer Driver as reference ***
+// NOTE: MAXPAPERWIDTH DOES exceed HEADSIZEDOTS!!
+#define RJ3150Ai_MIN_PAPERWIDTHDOTS (0.47F * RJ3150Ai_RESOLUTION_HORZ) // 95
+#define RJ3150Ai_MAX_PAPERWIDTHDOTS (3.15F * RJ3150Ai_RESOLUTION_HORZ) // 639.
+// spec section 4.3.4 Maximum and Minimum Lengths
+#define RJ3150Ai_MIN_PAPERLENGTHDOTS 96
+#define RJ3150Ai_MAX_PAPERLENGTHDOTS 7992
+// spec section 4.3.3 Feed Amount
+#ifdef OLD
+// IMPORTANT NOTE: For LABEL papertype ONLY, we allow the MIN marginlengthdots to be set to 0.
+// That is, this MIN value here is ignored when papertype = label is specified.
+// Consider the case of a 1.0x0.5" label. A min margin of 0.12" will take up half of the printable length!!
+// This is why we will allow the margin to be set to 0 in this case.
+// Beware that some labels might clip the top if this is set to 0. But, other settings can be tweaked to
+// make it work (such as by setting a larger paperlength and setting the top margin to non-zero.)
+#define RJ3150Ai_MIN_MARGINLENGTHDOTS 24
+
+#else
+// Allow 0 now for continuous roll too, as the Esc iUw command generated from this can affect AirPrint.
+// However, if this is 0, then the Esc id command will send 0 too. And, the printer may not eject the page
+// enough at the end. So, I am introducing the MIN_PAGEFEEDDOTS definition now, so that if current marginLengthDots
+// is LESS than MIN_PAGEFEEDDOTS, we will send Esc id command using the MIN_PAGEFEEDDOTS value instead.
+// Otherwise, the Esc id command will use the marginLengthDots value as it has in the past.
+//
+// NOTE: If this occurs, the final paper length after tear off will be up to 1/4" longer than the
+// specified paperLengthDots, because the print data will be (up to) the entire paper length, and then the
+// PAGEFEEDDOTS will be added to the final paper length. If you need a specific paperlength, then make sure
+// that marginLengthDots is >= MIN_PAGEFEEDDOTS.
+
+#define RJ3150Ai_MIN_MARGINLENGTHDOTS 0
+// v2.3.0 UPDATE: Instead of forcing this MIN_PAGEFEEDDOTS value on EVERY page, which essentially PREVENTS a "no gap"
+// solution if the FW actually supports it, now we only force it on the LAST page, allowing a 0-margin between pages
+// in case the FW allows it. But, we will force this on the LAST page, to assure the FW will eject the page to tear off
+// in case it doesn't automatically behave that way.
+#define RJ3150Ai_MIN_PAGEFEEDDOTS_LASTPAGE 24
+
+#endif
+
+#define RJ3150Ai_MAX_MARGINLENGTHDOTS 1015
+// Arbitrarily restrict extraFeed to 11" at 203 dpi. There is no reason to be larger.
+#define RJ3150Ai_MAX_EXTRAFEEDDOTS (11*RJ3150Ai_RESOLUTION_VERT)
+
+//*** IMPORTANT ***
+// SDK Users:
+// You should NEVER instantiate an object of the GenericMobileLabelModelPrintSettings class.
+// Instead, you should instantiate one of the model-specific subclasses (i.e. RJ3150AiPrintSettings).
+//
+// For a list of important properties in the settings that your application needs to set,
+// refer to the GenericMobileLabelModelPrintSettings superclass.
+
+// SDK Designers:
+// The GenericMobileLabelModelPrintSettings class handles all the important work.
+// This subclass only needs to provide the model-specific data to the generic class.
+
+//*** ADDITIONAL PROPERTIES not handled by GenericMobileLabelModelPrintSettings
+@property (nonatomic, assign) BOOL peelerEnabled;
+@property (nonatomic, assign) BOOL invert180degrees;
+
+@end

package/ios/Pods/BRLMPrinterKit/BRLMPrinterKit/BRLMPrinterKit.framework/Headers/RJ3150AiPrintSettingsViewController.h

@@ -0,0 +1,42 @@
+//
+//  RJ3150AiPrintSettingsViewController.h
+//  BMSPrinterKit
+//
+//  Created by BMS on 1/30/13.
+//  Copyright (c) 2013 Brother Mobile Solutions. All rights reserved.
+//
+
+#import "GenericMobileLabelModelPrintSettingsViewController.h"
+#import "RJ3150AiPrintSettings.h"
+
+// This is the DEFAULT popup contentSize for RJ3150AiPrintSettingsViewController.
+//
+// You can override this by setting the "popoverSize" property (defined in the
+// PrintSettingsViewController superclass) to something different
+// before showing the ViewController.
+//
+// The popoverSize setting will be propagated to all of the "child" ViewControllers
+// of the main ViewController so all of the detail views will be the SAME size as each other.
+//
+// NOTE: iPad1 and iPad2 size = 1024 x 768, iPad3 = 2048 x 1536
+//#define RJ3150AiPOPUPCONTENTSIZE CGSizeMake(400,480)
+#define RJ3150AiPOPUPCONTENTSIZE CGSizeMake(400,548)
+#define RJ3150AiPOPUPCONTENTSIZE_IOS7 CGSizeMake(400,588)
+
+
+/*
+ This class is a subclass of GenericMobileLabelModelPrintSettingsViewController,
+ which implements all the major functionality.
+ 
+  *** SDK Users:  
+ DO NOT INSTANTIATE an instance of GenericMobileLabelModelPrintSettingsViewController.
+ Always instantiate a model-specific class, e.g. RJ3150AiPrintSettingsViewController
+ */
+
+@interface RJ3150AiPrintSettingsViewController : GenericMobileLabelModelPrintSettingsViewController
+{
+}
+
+@end
+
+

package/ios/Pods/BRLMPrinterKit/BRLMPrinterKit/BRLMPrinterKit.framework/Headers/RJ3150PrintSettings.h

@@ -0,0 +1,82 @@
+//
+//  RJ3150PrintSettings.h
+//  BMSPrinterKit
+//
+//  Created by BMS on 9/12/12.
+//  Copyright (c) 2012 Brother Mobile Solutions. All rights reserved.
+//
+
+#import "GenericMobileLabelModelPrintSettings.h"
+
+
+@interface RJ3150PrintSettings : GenericMobileLabelModelPrintSettings <PrintSettingsDelegate>
+
+// These definitions are provided for information only. DO NOT MODIFY!
+// spec section 4.3.1 Resolution
+#define RJ3150_RESOLUTION_HORZ 203
+#define RJ3150_RESOLUTION_VERT 203
+// spec section 4.3.6 Raster Line
+#define RJ3150_HEADSIZEDOTS 576
+// spec section "Select compression mode" command
+// NOTE: This should be same as HEADSIZEDOTS/8. And, it should be same as the # of decompressed bytes.
+#define RJ3150_MAX_COMPRESS_LENGTH 72
+
+// NOT in spec. *** Used Windows Printer Driver as reference ***
+// NOTE: MAXPAPERWIDTH DOES exceed HEADSIZEDOTS!!
+#define RJ3150_MIN_PAPERWIDTHDOTS (0.47F * RJ3150_RESOLUTION_HORZ) // 95
+#define RJ3150_MAX_PAPERWIDTHDOTS (3.15F * RJ3150_RESOLUTION_HORZ) // 639.
+// spec section 4.3.4 Maximum and Minimum Lengths
+#define RJ3150_MIN_PAPERLENGTHDOTS 96
+#define RJ3150_MAX_PAPERLENGTHDOTS 7992
+// spec section 4.3.3 Feed Amount
+#ifdef OLD
+// IMPORTANT NOTE: For LABEL papertype ONLY, we allow the MIN marginlengthdots to be set to 0.
+// That is, this MIN value here is ignored when papertype = label is specified.
+// Consider the case of a 1.0x0.5" label. A min margin of 0.12" will take up half of the printable length!!
+// This is why we will allow the margin to be set to 0 in this case.
+// Beware that some labels might clip the top if this is set to 0. But, other settings can be tweaked to
+// make it work (such as by setting a larger paperlength and setting the top margin to non-zero.)
+#define RJ3150_MIN_MARGINLENGTHDOTS 24
+
+#else
+// Allow 0 now for continuous roll too, as the Esc iUw command generated from this can affect AirPrint.
+// However, if this is 0, then the Esc id command will send 0 too. And, the printer may not eject the page
+// enough at the end. So, I am introducing the MIN_PAGEFEEDDOTS definition now, so that if current marginLengthDots
+// is LESS than MIN_PAGEFEEDDOTS, we will send Esc id command using the MIN_PAGEFEEDDOTS value instead.
+// Otherwise, the Esc id command will use the marginLengthDots value as it has in the past.
+//
+// NOTE: If this occurs, the final paper length after tear off will be up to 1/4" longer than the
+// specified paperLengthDots, because the print data will be (up to) the entire paper length, and then the
+// PAGEFEEDDOTS will be added to the final paper length. If you need a specific paperlength, then make sure
+// that marginLengthDots is >= MIN_PAGEFEEDDOTS.
+
+#define RJ3150_MIN_MARGINLENGTHDOTS 0
+// v2.3.0 UPDATE: Instead of forcing this MIN_PAGEFEEDDOTS value on EVERY page, which essentially PREVENTS a "no gap"
+// solution if the FW actually supports it, now we only force it on the LAST page, allowing a 0-margin between pages
+// in case the FW allows it. But, we will force this on the LAST page, to assure the FW will eject the page to tear off
+// in case it doesn't automatically behave that way.
+#define RJ3150_MIN_PAGEFEEDDOTS_LASTPAGE 24
+
+#endif
+
+#define RJ3150_MAX_MARGINLENGTHDOTS 1015
+// Arbitrarily restrict extraFeed to 11" at 203 dpi. There is no reason to be larger.
+#define RJ3150_MAX_EXTRAFEEDDOTS (11*RJ3150_RESOLUTION_VERT)
+
+//*** IMPORTANT ***
+// SDK Users:
+// You should NEVER instantiate an object of the GenericMobileLabelModelPrintSettings class.
+// Instead, you should instantiate one of the model-specific subclasses (i.e. RJ3150PrintSettings).
+//
+// For a list of important properties in the settings that your application needs to set,
+// refer to the GenericMobileLabelModelPrintSettings superclass.
+
+// SDK Designers:
+// The GenericMobileLabelModelPrintSettings class handles all the important work.
+// This subclass only needs to provide the model-specific data to the generic class.
+
+//*** ADDITIONAL PROPERTIES not handled by GenericMobileLabelModelPrintSettings
+@property (nonatomic, assign) BOOL peelerEnabled;
+@property (nonatomic, assign) BOOL invert180degrees;
+
+@end

package/ios/Pods/BRLMPrinterKit/BRLMPrinterKit/BRLMPrinterKit.framework/Headers/RJ3150PrintSettingsViewController.h

@@ -0,0 +1,42 @@
+//
+//  RJ3150PrintSettingsViewController.h
+//  BMSPrinterKit
+//
+//  Created by BMS on 1/30/13.
+//  Copyright (c) 2013 Brother Mobile Solutions. All rights reserved.
+//
+
+#import "GenericMobileLabelModelPrintSettingsViewController.h"
+#import "RJ3150PrintSettings.h"
+
+// This is the DEFAULT popup contentSize for RJ3150PrintSettingsViewController.
+//
+// You can override this by setting the "popoverSize" property (defined in the
+// PrintSettingsViewController superclass) to something different
+// before showing the ViewController.
+//
+// The popoverSize setting will be propagated to all of the "child" ViewControllers
+// of the main ViewController so all of the detail views will be the SAME size as each other.
+//
+// NOTE: iPad1 and iPad2 size = 1024 x 768, iPad3 = 2048 x 1536
+//#define RJ3150POPUPCONTENTSIZE CGSizeMake(400,480)
+#define RJ3150POPUPCONTENTSIZE CGSizeMake(400,548)
+#define RJ3150POPUPCONTENTSIZE_IOS7 CGSizeMake(400,588)
+
+
+/*
+ This class is a subclass of GenericMobileLabelModelPrintSettingsViewController,
+ which implements all the major functionality.
+ 
+  *** SDK Users:  
+ DO NOT INSTANTIATE an instance of GenericMobileLabelModelPrintSettingsViewController.
+ Always instantiate a model-specific class, e.g. RJ3150PrintSettingsViewController
+ */
+
+@interface RJ3150PrintSettingsViewController : GenericMobileLabelModelPrintSettingsViewController
+{
+}
+
+@end
+
+

package/ios/Pods/BRLMPrinterKit/BRLMPrinterKit/BRLMPrinterKit.framework/Headers/RJ4030AiPrintSettings.h

@@ -0,0 +1,103 @@
+//
+//  RJ4030AiPrintSettings.h
+//  BMSPrinterKit
+//
+//  Created by BMS on 2/9/16.
+//  Copyright (c) 2012 Brother Mobile Solutions. All rights reserved.
+//
+
+#import "GenericMobileLabelModelPrintSettings.h"
+
+
+@interface RJ4030AiPrintSettings : GenericMobileLabelModelPrintSettings <PrintSettingsDelegate>
+
+// These definitions are provided for information only. DO NOT MODIFY!
+// spec section 2.3.1 Resolution
+#define RJ4030Ai_RESOLUTION_HORZ 203
+#define RJ4030Ai_RESOLUTION_VERT 203
+// spec section 2.3.5 Raster Line
+#define RJ4030Ai_HEADSIZEDOTS 832
+// spec section "Select compression mode" command
+// NOTE: This should be same as HEADSIZEDOTS/8. And, it should be same as the # of decompressed bytes.
+// NOTE: Previously, this was 162. But, it appears to be an error in the English Command Ref Guide.
+#define RJ4030Ai_MAX_COMPRESS_LENGTH 104
+
+//////////////////////////////////////////////
+// MIN/MAX PAPERWIDTH values are not in spec.
+// Used Windows Printer Driver as reference (which allows 0.47" min and 4.09" max).
+//
+// v1.1.1 UPDATE: According to Ann, MAX_PAPERWIDTH can actually be 4.64" instead of 4.09".
+// However, the printable width can not exceed 832 dots, so setting the paperWidthDots larger than 4.09"
+// will result in the marginWidthDots being increased automatically, but subsequently reducing paperWidthDots
+// will not automatically result in marginWidthDots being decreased back to its previous value.
+// This can be demonstrated using the PrintSettingsViewController.
+//
+// If someone actually has paper that is 4.64" wide, the printed result will NOT BE ANY DIFFERENT whether
+// we allow 4.09" or 4.64" here, because in either case we can't use more than 832 dots, and this will be
+// centered automatically on the wider paper. So, there is no reason to allow 4.64" wide here, since doing so
+// potentially introduces the issue related to marginWidthDots mentioned above.
+// So, let's leave MAX_PAPERWIDTHDOTS at 832 rather than change to (4.64F * RJ4030Ai_RESOLUTION_HORZ)
+//
+// UPDATE2: According to Ann, MIN_PAPERWIDTH is actually 2.00" rather than 0.47".
+// However, in case for some reason someone actually has narrower paper, let's not force this 2" restriction.
+// So, we will keep this value the same as before as well.
+//
+// NOTE: MAXPAPERWIDTH does NOT exceed HEADSIZEDOTS!! (refer to v1.1.1 UPDATE discussion above. This comment
+// here is only relevant in comparison to RJ3 and TD2 models, which are still allowing paper width to EXCEED
+// the headsize, though perhaps we shouldn't allow this for the other models either.)
+#define RJ4030Ai_MIN_PAPERWIDTHDOTS (0.47F * RJ4030Ai_RESOLUTION_HORZ) // 95, was using 203 in 0.9 SDK
+#define RJ4030Ai_MAX_PAPERWIDTHDOTS 832 // NOTE: WinDriver allows 4.09", which is ~832.
+//////////////////////////////////////////////
+
+// spec section 2.3.4 Maximum and Minimum Lengths
+#define RJ4030Ai_MIN_PAPERLENGTHDOTS 203 // NOTE: spec says 204 dots, but 203 seems OK.
+#define RJ4030Ai_MAX_PAPERLENGTHDOTS 24094
+// spec section 2.3.3 Feed Amount
+#ifdef OLD
+// IMPORTANT NOTE: For LABEL papertype ONLY, we allow the MIN marginlengthdots to be set to 0.
+// That is, this MIN value here is ignored when papertype = label is specified.
+// Consider the case of a 1.0x0.5" label. A min margin of 0.12" will take up half of the printable length!!
+// This is why we will allow the margin to be set to 0 in this case.
+// Beware that some labels might clip the top if this is set to 0. But, other settings can be tweaked to
+// make it work (such as by setting a larger paperlength and setting the top margin to non-zero.)
+#define RJ4030Ai_MIN_MARGINLENGTHDOTS 24
+
+#else
+// Allow 0 now for continuous roll too, as the Esc iUw command generated from this can affect AirPrint.
+// (Of course, AirPrint is N/A for the Bluetooth model. But, I am changing this so it behaves consistently.)
+// However, if this is 0, then the Esc id command will send 0 too. And, the printer may not eject the page
+// enough at the end. So, I am introducing the MIN_PAGEFEEDDOTS definition now, so that if current marginLengthDots
+// is LESS than MIN_PAGEFEEDDOTS, we will send Esc id command using the MIN_PAGEFEEDDOTS value instead.
+// Otherwise, the Esc id command will use the marginLengthDots value as it has in the past.
+//
+// NOTE: If this occurs, the final paper length after tear off will be up to 1/4" longer than the
+// specified paperLengthDots, because the print data will be (up to) the entire paper length, and then the
+// PAGEFEEDDOTS will be added to the final paper length. If you need a specific paperlength, then make sure
+// that marginLengthDots is >= MIN_PAGEFEEDDOTS.
+
+#define RJ4030Ai_MIN_MARGINLENGTHDOTS 0
+// v2.3.0 UPDATE: Instead of forcing this MIN_PAGEFEEDDOTS value on EVERY page, which essentially PREVENTS a "no gap"
+// solution if the FW actually supports it, now we only force it on the LAST page, allowing a 0-margin between pages
+// in case the FW allows it. But, we will force this on the LAST page, to assure the FW will eject the page to tear off
+// in case it doesn't automatically behave that way.
+#define RJ4030Ai_MIN_PAGEFEEDDOTS_LASTPAGE 24
+
+#endif
+
+#define RJ4030Ai_MAX_MARGINLENGTHDOTS 1020 // NOTE: was using 1015 in 0.9 SDK
+// Arbitrarily restrict extraFeed to 11" at 203 dpi. There is no reason to be larger.
+#define RJ4030Ai_MAX_EXTRAFEEDDOTS (11*RJ4030Ai_RESOLUTION_VERT)
+
+//*** IMPORTANT ***
+// SDK Users:
+// You should NEVER instantiate an object of the GenericMobileLabelModelPrintSettings class.
+// Instead, you should instantiate one of the model-specific subclasses (i.e. RJ4030AiPrintSettings).
+//
+// For a list of important properties in the settings that your application needs to set,
+// refer to the GenericMobileLabelModelPrintSettings superclass.
+
+// SDK Designers:
+// The GenericMobileLabelModelPrintSettings class handles all the important work.
+// This subclass only needs to provide the model-specific data to the generic class.
+
+@end

package/ios/Pods/BRLMPrinterKit/BRLMPrinterKit/BRLMPrinterKit.framework/Headers/RJ4030AiPrintSettingsViewController.h

@@ -0,0 +1,41 @@
+//
+//  RJ4030AiPrintSettingsViewController.h
+//  BMSPrinterKit
+//
+//  Created by BMS on 2/9/16.
+//  Copyright (c) 2013 Brother Mobile Solutions. All rights reserved.
+//
+
+#import "GenericMobileLabelModelPrintSettingsViewController.h"
+#import "RJ4030AiPrintSettings.h"
+
+// This is the DEFAULT popup contentSize for RJ4030AiPrintSettingsViewController.
+//
+// You can override this by setting the "popoverSize" property (defined in the
+// PrintSettingsViewController superclass) to something different
+// before showing the ViewController.
+//
+// The popoverSize setting will be propagated to all of the "child" ViewControllers
+// of the main ViewController so all of the detail views will be the SAME size as each other.
+//
+// NOTE: iPad1 and iPad2 size = 1024 x 768, iPad3 = 2048 x 1536
+#define RJ4030AiPOPUPCONTENTSIZE CGSizeMake(400,480)
+#define RJ4030AiPOPUPCONTENTSIZE_IOS7 CGSizeMake(400,588)
+
+
+/*
+ This class is a subclass of GenericMobileLabelModelPrintSettingsViewController,
+ which implements all the major functionality.
+ 
+ *** SDK Users:  
+ DO NOT INSTANTIATE an instance of GenericMobileLabelModelPrintSettingsViewController.
+ Always instantiate a model-specific class, e.g. RJ4030AiPrintSettingsViewController
+ */
+
+@interface RJ4030AiPrintSettingsViewController : GenericMobileLabelModelPrintSettingsViewController
+{
+}
+
+@end
+
+