@qwen-code/qwen-code 0.18.5 → 0.19.1

package/bundled/qc-helper/docs/configuration/qwen-ignore.md

@@ -1,33 +1,49 @@
 # Ignoring Files
 
-This document provides an overview of the Qwen Ignore (`.qwenignore`) feature of Qwen Code.
+This document provides an overview of the Qwen Ignore (`.qwenignore`) feature of Qwen Code. Qwen Code also recognizes custom ignore files configured by `context.fileFiltering.customIgnoreFiles`, which defaults to the compatibility files `.agentignore` and `.aiignore`.
 
-Qwen Code includes the ability to automatically ignore files, similar to `.gitignore` (used by Git). Adding paths to your `.qwenignore` file will exclude them from tools that support this feature, although they will still be visible to other services (such as Git).
+Qwen Code includes the ability to automatically ignore files, similar to `.gitignore` (used by Git). Adding paths to `.qwenignore` or a configured custom ignore file will exclude them from tools that support this feature, although they will still be visible to other services (such as Git).
 
 ## How it works
 
-When you add a path to your `.qwenignore` file, tools that respect this file will exclude matching files and directories from their operations. For example, when you use the [`read_many_files`](../../developers/tools/multi-file) command, any paths in your `.qwenignore` file will be automatically excluded.
+When you add a path to one of these ignore files, tools that respect Qwen ignore rules will exclude matching files and directories from their operations. For example, when you use the [`read_many_files`](../../developers/tools/multi-file) command, any paths in `.qwenignore` or configured custom ignore files will be automatically excluded.
 
-For the most part, `.qwenignore` follows the conventions of `.gitignore` files:
+For the most part, these ignore files follow the conventions of `.gitignore` files:
 
 - Blank lines and lines starting with `#` are ignored.
 - Standard glob patterns are supported (such as `*`, `?`, and `[]`).
 - Putting a `/` at the end will only match directories.
-- Putting a `/` at the beginning anchors the path relative to the `.qwenignore` file.
+- Putting a `/` at the beginning anchors the path relative to the ignore file.
 - `!` negates a pattern.
 
-You can update your `.qwenignore` file at any time. To apply the changes, you must restart your Qwen Code session.
+You can update these ignore files at any time. To apply the changes, you must restart your Qwen Code session.
 
-## How to use `.qwenignore`
+## How to use ignore files
 
-| Step                   | Description                                                                            |
-| ---------------------- | -------------------------------------------------------------------------------------- |
-| **Enable .qwenignore** | Create a file named `.qwenignore` in your project root directory                       |
-| **Add ignore rules**   | Open `.qwenignore` file and add paths to ignore, example: `/archive/` or `apikeys.txt` |
+| Step                    | Description                                                                                                                                   |
+| ----------------------- | --------------------------------------------------------------------------------------------------------------------------------------------- |
+| **Enable ignore rules** | Create `.qwenignore`, a default custom file (`.agentignore` / `.aiignore`), or a configured custom ignore file in your project root directory |
+| **Add ignore rules**    | Open the ignore file and add paths to ignore, example: `/archive/` or `apikeys.txt`                                                           |
 
-### `.qwenignore` examples
+By default, Qwen Code reads `.qwenignore`, `.agentignore`, and `.aiignore`.
+To use a different custom ignore file, configure:
 
-You can use `.qwenignore` to ignore directories and files:
+```json
+{
+  "context": {
+    "fileFiltering": {
+      "customIgnoreFiles": [".cursorignore"]
+    }
+  }
+}
+```
+
+`.qwenignore` is always included when `context.fileFiltering.respectQwenIgnore`
+is enabled. Custom ignore file paths are relative to the project root.
+
+### Ignore file examples
+
+You can use any supported ignore file to ignore directories and files:
 
 ```
 # Exclude your /packages/ directory and all subdirectories
@@ -37,7 +53,7 @@ You can use `.qwenignore` to ignore directories and files:
 apikeys.txt
 ```
 
-You can use wildcards in your `.qwenignore` file with `*`:
+You can use wildcards in your ignore file with `*`:
 
 ```
 # Exclude all .md files
@@ -52,4 +68,4 @@ Finally, you can exclude files and directories from exclusion with `!`:
 !README.md
 ```
 
-To remove paths from your `.qwenignore` file, delete the relevant lines.
+To remove paths from an ignore file, delete the relevant lines.

package/bundled/qc-helper/docs/configuration/settings.md

@@ -235,25 +235,26 @@ The `extra_body` field allows you to add custom parameters to the request body s
 
 #### context
 
-| Setting                                                     | Type                       | Description                                                                                                                                                                                                                                                                                                                                                           | Default     |
-| ----------------------------------------------------------- | -------------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ----------- |
-| `context.fileName`                                          | string or array of strings | The name of the context file(s).                                                                                                                                                                                                                                                                                                                                      | `undefined` |
-| `context.importFormat`                                      | string                     | The format to use when importing memory.                                                                                                                                                                                                                                                                                                                              | `undefined` |
-| `context.includeDirectories`                                | array                      | Additional directories to include in the workspace context. Specifies an array of additional absolute or relative paths to include in the workspace context. Missing directories will be skipped with a warning by default. Paths can use `~` to refer to the user's home directory. This setting can be combined with the `--include-directories` command-line flag. | `[]`        |
-| `context.loadFromIncludeDirectories`                        | boolean                    | Controls the behavior of the `/memory refresh` command. If set to `true`, `QWEN.md` files should be loaded from all directories that are added. If set to `false`, `QWEN.md` should only be loaded from the current directory.                                                                                                                                        | `false`     |
-| `context.fileFiltering.respectGitIgnore`                    | boolean                    | Respect .gitignore files when searching.                                                                                                                                                                                                                                                                                                                              | `true`      |
-| `context.fileFiltering.respectQwenIgnore`                   | boolean                    | Respect .qwenignore files when searching.                                                                                                                                                                                                                                                                                                                             | `true`      |
-| `context.fileFiltering.enableRecursiveFileSearch`           | boolean                    | Whether to enable searching recursively for filenames under the current tree when completing `@` prefixes in the prompt.                                                                                                                                                                                                                                              | `true`      |
-| `context.fileFiltering.enableFuzzySearch`                   | boolean                    | When `true`, enables fuzzy search capabilities when searching for files. Set to `false` to improve performance on projects with a large number of files.                                                                                                                                                                                                              | `true`      |
-| `context.clearContextOnIdle.toolResultsThresholdMinutes`    | number                     | Minutes of inactivity before clearing old tool result content. Use `-1` to disable the idle trigger.                                                                                                                                                                                                                                                                  | `60`        |
-| `context.clearContextOnIdle.toolResultsNumToKeep`           | number                     | Number of most-recent compactable tool results to preserve when clearing. Floor at 1.                                                                                                                                                                                                                                                                                 | `5`         |
-| `context.clearContextOnIdle.toolResultsTotalCharsThreshold` | number                     | Total compactable tool result output characters allowed in history before clearing oldest results. Use `-1` to disable the size trigger. This is a soft threshold: protected recent tool results may keep the total above it.                                                                                                                                         | `500000`    |
+| Setting                                                     | Type                       | Description                                                                                                                                                                                                                                                                                                                                                           | Default                         |
+| ----------------------------------------------------------- | -------------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ------------------------------- |
+| `context.fileName`                                          | string or array of strings | The name of the context file(s).                                                                                                                                                                                                                                                                                                                                      | `undefined`                     |
+| `context.importFormat`                                      | string                     | The format to use when importing memory.                                                                                                                                                                                                                                                                                                                              | `undefined`                     |
+| `context.includeDirectories`                                | array                      | Additional directories to include in the workspace context. Specifies an array of additional absolute or relative paths to include in the workspace context. Missing directories will be skipped with a warning by default. Paths can use `~` to refer to the user's home directory. This setting can be combined with the `--include-directories` command-line flag. | `[]`                            |
+| `context.loadFromIncludeDirectories`                        | boolean                    | Controls the behavior of the `/memory refresh` command. If set to `true`, `QWEN.md` files should be loaded from all directories that are added. If set to `false`, `QWEN.md` should only be loaded from the current directory.                                                                                                                                        | `false`                         |
+| `context.fileFiltering.respectGitIgnore`                    | boolean                    | Respect .gitignore files when searching.                                                                                                                                                                                                                                                                                                                              | `true`                          |
+| `context.fileFiltering.respectQwenIgnore`                   | boolean                    | Respect .qwenignore and configured custom ignore files when searching.                                                                                                                                                                                                                                                                                                | `true`                          |
+| `context.fileFiltering.customIgnoreFiles`                   | array                      | Project-root-relative ignore files to use instead of the default compatibility files (`.agentignore`, `.aiignore`) when `respectQwenIgnore` is enabled. `.qwenignore` is always included.                                                                                                                                                                             | `[".agentignore", ".aiignore"]` |
+| `context.fileFiltering.enableRecursiveFileSearch`           | boolean                    | Whether to enable searching recursively for filenames under the current tree when completing `@` prefixes in the prompt.                                                                                                                                                                                                                                              | `true`                          |
+| `context.fileFiltering.enableFuzzySearch`                   | boolean                    | When `true`, enables fuzzy search capabilities when searching for files. Set to `false` to improve performance on projects with a large number of files.                                                                                                                                                                                                              | `true`                          |
+| `context.clearContextOnIdle.toolResultsThresholdMinutes`    | number                     | Minutes of inactivity before clearing old tool result content. Use `-1` to disable the idle trigger.                                                                                                                                                                                                                                                                  | `60`                            |
+| `context.clearContextOnIdle.toolResultsNumToKeep`           | number                     | Number of most-recent compactable tool results to preserve when clearing. Floor at 1.                                                                                                                                                                                                                                                                                 | `5`                             |
+| `context.clearContextOnIdle.toolResultsTotalCharsThreshold` | number                     | Total compactable tool result output characters allowed in history before clearing oldest results. Use `-1` to disable the size trigger. This is a soft threshold: protected recent tool results may keep the total above it.                                                                                                                                         | `500000`                        |
 
 #### Troubleshooting File Search Performance
 
 If you are experiencing performance issues with file searching (e.g., with `@` completions), especially in projects with a very large number of files, here are a few things you can try in order of recommendation:
 
-1. **Use `.qwenignore`:** Create a `.qwenignore` file in your project root to exclude directories that contain a large number of files that you don't need to reference (e.g., build artifacts, logs, `node_modules`). Reducing the total number of files crawled is the most effective way to improve performance.
+1. **Use an ignore file:** Create a `.qwenignore` or configured custom ignore file in your project root to exclude directories that contain a large number of files that you don't need to reference (e.g., build artifacts, logs, `node_modules`). Reducing the total number of files crawled is the most effective way to improve performance.
 2. **Disable Fuzzy Search:** If ignoring files is not enough, you can disable fuzzy search by setting `enableFuzzySearch` to `false` in your `settings.json` file. This will use a simpler, non-fuzzy matching algorithm, which can be faster.
 3. **Disable Recursive File Search:** As a last resort, you can disable recursive file search entirely by setting `enableRecursiveFileSearch` to `false`. This will be the fastest option as it avoids a recursive crawl of your project. However, it means you will need to type the full path to files when using `@` completions.
 

package/bundled/qc-helper/docs/extension/introduction.md

@@ -12,11 +12,11 @@ We offer a suite of extension management tools using both `qwen extensions` CLI
 
 You can manage extensions at runtime within the interactive CLI using `/extensions` slash commands. These commands support hot-reloading, meaning changes take effect immediately without restarting the application.
 
-| Command                               | Description                                                                  |
-| ------------------------------------- | ---------------------------------------------------------------------------- |
-| `/extensions` or `/extensions manage` | Manage all installed extensions                                              |
-| `/extensions install <source>`        | Install an extension from a git URL, local path, npm package, or marketplace |
-| `/extensions explore [source]`        | Open extensions source page(Gemini or ClaudeCode) in your browser            |
+| Command                               | Description                                                                                          |
+| ------------------------------------- | ---------------------------------------------------------------------------------------------------- |
+| `/extensions` or `/extensions manage` | Manage all installed extensions                                                                      |
+| `/extensions install <source>`        | Install an extension from a git URL, local path or archive, archive URL, npm package, or marketplace |
+| `/extensions explore [source]`        | Open extensions source page(Gemini or ClaudeCode) in your browser                                    |
 
 #### The interactive extension manager
 
@@ -141,8 +141,26 @@ This will install the github mcp server extension.
 qwen extensions install /path/to/your/extension
 ```
 
+Local `.zip` and `.tar.gz` archives are also supported:
+
+```bash
+qwen extensions install /path/to/your/extension.zip
+qwen extensions install /path/to/your/extension.tar.gz
+```
+
+The archive must contain a complete extension at its root, or a single top-level directory containing the extension.
+
 Note that we create a copy of the installed extension, so you will need to run `qwen extensions update` to pull in changes from both locally-defined extensions and those on GitHub.
 
+#### From Archive URL
+
+```bash
+qwen extensions install https://example.com/your/extension.zip
+qwen extensions install https://example.com/your/extension.tar.gz
+```
+
+Archive URLs can be updated later as long as the URL continues to point at a newer archive for the same extension.
+
 #### Choosing an install scope
 
 By default, an installed extension is enabled globally (user scope). Pass `--scope project` to enable it only for the current workspace:
@@ -193,7 +211,7 @@ This is useful if you have an extension disabled at the top-level and only enabl
 
 ### Updating an extension
 
-For extensions installed from a local path, a git repository, or an npm registry, you can explicitly update to the latest version with `qwen extensions update extension-name`. For npm extensions installed without a version pin (e.g. `@scope/pkg`), updates check the `latest` dist-tag. For those installed with a specific dist-tag (e.g. `@scope/pkg@beta`), updates track that tag. Extensions pinned to an exact version (e.g. `@scope/pkg@1.2.0`) are always considered up-to-date.
+For extensions installed from a local path or archive, an archive URL, a git repository, or an npm registry, you can explicitly update to the latest version with `qwen extensions update extension-name`. For npm extensions installed without a version pin (e.g. `@scope/pkg`), updates check the `latest` dist-tag. For those installed with a specific dist-tag (e.g. `@scope/pkg@beta`), updates track that tag. Extensions pinned to an exact version (e.g. `@scope/pkg@1.2.0`) are always considered up-to-date.
 
 You can update all extensions with:
 

package/bundled/qc-helper/docs/features/mcp.md

@@ -42,8 +42,8 @@ qwen mcp
 
 Most users only need these two scopes:
 
-- **Project scope (default)**: `.qwen/settings.json` in your project root
-- **User scope**: `~/.qwen/settings.json` across all projects on your machine
+- **User scope (default)**: `~/.qwen/settings.json` across all projects on your machine
+- **Project scope**: `.qwen/settings.json` in your project root
 
 Write to user scope:
 
@@ -94,7 +94,7 @@ JSON (`.qwen/settings.json`):
 }
 ```
 
-CLI (writes to project scope by default):
+CLI (writes to user scope by default):
 
 ```bash
 qwen mcp add pythonTools -e DATABASE_URL=$DB_CONNECTION_STRING -e API_KEY=$EXTERNAL_API_KEY \
@@ -177,8 +177,11 @@ The prompt's messages are sent to the model, which then acts on them.
 
 Resources a server advertises via `resources/list` are discovered per
 server. Open the management dialog with `/mcp` and select a server to see
-its **Resources** count alongside its tools and prompts. As with prompts,
-the `resources` capability is not required to be declared.
+its **Resources** count alongside its tools and prompts. Choose **View
+resources** to browse the server's resource URIs; selecting one shows its
+description and MIME type along with the exact `@server:uri` reference to
+paste into a message. As with prompts, the `resources` capability is not
+required to be declared.
 
 Inject a resource's contents into your message with the `@server:uri`
 syntax — type `@`, then the server name, a colon, and the resource URI:
@@ -187,8 +190,12 @@ syntax — type `@`, then the server name, a colon, and the resource URI:
 summarize @myserver:file:///docs/spec.md and list the open questions
 ```
 
-Typing `@myserver:` shows an autocomplete list of that server's resource
-URIs. On submit, the referenced resource is read and its contents are
+Typing `@myserver:` shows an autocomplete list of that server's resources;
+keep typing to filter, matching (case-insensitively) either the resource URI
+or its friendly name/title. You don't have to know a URI by heart — before
+you reach the colon, typing part of a server name also suggests matching
+servers that expose resources, so you can pick one and drill straight into
+its resource list. On submit, the referenced resource is read and its contents are
 appended to your message (text inline, binary blobs as attachments); the
 `@server:uri` reference is preserved in the prompt so the model knows what
 it is looking at. The `server` prefix must match a configured MCP server —
@@ -447,7 +454,7 @@ qwen mcp add [options] <name> <commandOrUrl> [args...]
 | `<name>`                    | A unique name for the server.                                       | —                                      | `example-server`                                                   |
 | `<commandOrUrl>`            | The command to execute (for `stdio`) or the URL (for `http`/`sse`). | —                                      | `/usr/bin/python` or `http://localhost:8`                          |
 | `[args...]`                 | Optional arguments for a `stdio` command.                           | —                                      | `--port 5000`                                                      |
-| `-s`, `--scope`             | Configuration scope (user or project).                              | `project`                              | `-s user`                                                          |
+| `-s`, `--scope`             | Configuration scope (user or project).                              | `user`                                 | `-s user`                                                          |
 | `-t`, `--transport`         | Transport type (`stdio`, `sse`, `http`).                            | `stdio`                                | `-t sse`                                                           |
 | `-e`, `--env`               | Set environment variables.                                          | —                                      | `-e KEY=value`                                                     |
 | `-H`, `--header`            | Set HTTP headers for SSE and HTTP transports.                       | —                                      | `-H "X-Api-Key: abc123"`                                           |

package/chunks/{agent-2TEY55UD.js → agent-7CZOLKXM.js}

@@ -7,41 +7,43 @@ import {
   hasRebuiltToolRegistry,
   rebuildToolRegistryOnOverride,
   resolveSubagentApprovalMode
-} from "./chunk-VECKCOH6.js";
+} from "./chunk-2X2WXY6L.js";
 import "./chunk-K5PGHDBN.js";
-import "./chunk-XU7BKR3B.js";
-import "./chunk-2O3NAOJG.js";
-import "./chunk-XGU3ETVO.js";
+import "./chunk-TXVGVZYR.js";
+import "./chunk-XU5P23GN.js";
+import "./chunk-2BIF2NVV.js";
+import "./chunk-57XRIZVC.js";
+import "./chunk-255L5QYW.js";
 import "./chunk-2MPVVENX.js";
 import "./chunk-ZTQ26VBE.js";
-import "./chunk-C6MI2ASN.js";
-import "./chunk-LF6BKGZT.js";
-import "./chunk-26ZYKTYZ.js";
+import "./chunk-GZCJS5WH.js";
 import "./chunk-MLZQVCF3.js";
 import "./chunk-LD2XBG6Z.js";
-import "./chunk-ID533GA3.js";
-import "./chunk-KGV3F6UF.js";
-import "./chunk-77WXWU44.js";
-import "./chunk-AE6RQU6F.js";
-import "./chunk-2CNO5W47.js";
+import "./chunk-OTBK43JR.js";
+import "./chunk-HGNSRCRB.js";
+import "./chunk-EEEZIVFJ.js";
+import "./chunk-PRYMDRBV.js";
+import "./chunk-YMBWB67C.js";
 import "./chunk-3PJXIDKI.js";
 import "./chunk-UWCTAVOD.js";
 import "./chunk-OFEVLU4C.js";
 import "./chunk-OMX7CUOE.js";
-import "./chunk-FH4P6RQA.js";
-import "./chunk-CTHZVIMD.js";
-import "./chunk-VKILGMZQ.js";
-import "./chunk-GOMVJKBL.js";
-import "./chunk-MSJ2MXJ6.js";
-import "./chunk-ATLUHLZE.js";
+import "./chunk-BNXANYLH.js";
+import "./chunk-T2VDEFUU.js";
+import "./chunk-PO5LVPK3.js";
+import "./chunk-PLY4F7QW.js";
+import "./chunk-BGUDAULQ.js";
+import "./chunk-EW6C27XX.js";
+import "./chunk-22IFUCVR.js";
 import "./chunk-64WXLC72.js";
-import "./chunk-LTN3VYMZ.js";
-import "./chunk-42HGOMED.js";
-import "./chunk-G4BUMVEY.js";
+import "./chunk-3UALQ56H.js";
+import "./chunk-JDV3VBPY.js";
+import "./chunk-CGEGHF2C.js";
+import "./chunk-EJYJYJZ2.js";
 import "./chunk-55ZMG67I.js";
 import "./chunk-H6BD2ELD.js";
 import "./chunk-5IFG2VC4.js";
-import "./chunk-WE6TNQJU.js";
+import "./chunk-C4K3FEQ2.js";
 import "./chunk-ZERZSAZL.js";
 import "./chunk-QN5NZ3UQ.js";
 import "./chunk-BR4QREVK.js";

package/chunks/{agent-headless-SCUAXEEE.js → agent-headless-K37PBQK5.js}

@@ -4,41 +4,43 @@ import {
   AgentHeadless,
   ContextState,
   templateString
-} from "./chunk-VECKCOH6.js";
+} from "./chunk-2X2WXY6L.js";
 import "./chunk-K5PGHDBN.js";
-import "./chunk-XU7BKR3B.js";
-import "./chunk-2O3NAOJG.js";
-import "./chunk-XGU3ETVO.js";
+import "./chunk-TXVGVZYR.js";
+import "./chunk-XU5P23GN.js";
+import "./chunk-2BIF2NVV.js";
+import "./chunk-57XRIZVC.js";
+import "./chunk-255L5QYW.js";
 import "./chunk-2MPVVENX.js";
 import "./chunk-ZTQ26VBE.js";
-import "./chunk-C6MI2ASN.js";
-import "./chunk-LF6BKGZT.js";
-import "./chunk-26ZYKTYZ.js";
+import "./chunk-GZCJS5WH.js";
 import "./chunk-MLZQVCF3.js";
 import "./chunk-LD2XBG6Z.js";
-import "./chunk-ID533GA3.js";
-import "./chunk-KGV3F6UF.js";
-import "./chunk-77WXWU44.js";
-import "./chunk-AE6RQU6F.js";
-import "./chunk-2CNO5W47.js";
+import "./chunk-OTBK43JR.js";
+import "./chunk-HGNSRCRB.js";
+import "./chunk-EEEZIVFJ.js";
+import "./chunk-PRYMDRBV.js";
+import "./chunk-YMBWB67C.js";
 import "./chunk-3PJXIDKI.js";
 import "./chunk-UWCTAVOD.js";
 import "./chunk-OFEVLU4C.js";
 import "./chunk-OMX7CUOE.js";
-import "./chunk-FH4P6RQA.js";
-import "./chunk-CTHZVIMD.js";
-import "./chunk-VKILGMZQ.js";
-import "./chunk-GOMVJKBL.js";
-import "./chunk-MSJ2MXJ6.js";
-import "./chunk-ATLUHLZE.js";
+import "./chunk-BNXANYLH.js";
+import "./chunk-T2VDEFUU.js";
+import "./chunk-PO5LVPK3.js";
+import "./chunk-PLY4F7QW.js";
+import "./chunk-BGUDAULQ.js";
+import "./chunk-EW6C27XX.js";
+import "./chunk-22IFUCVR.js";
 import "./chunk-64WXLC72.js";
-import "./chunk-LTN3VYMZ.js";
-import "./chunk-42HGOMED.js";
-import "./chunk-G4BUMVEY.js";
+import "./chunk-3UALQ56H.js";
+import "./chunk-JDV3VBPY.js";
+import "./chunk-CGEGHF2C.js";
+import "./chunk-EJYJYJZ2.js";
 import "./chunk-55ZMG67I.js";
 import "./chunk-H6BD2ELD.js";
 import "./chunk-5IFG2VC4.js";
-import "./chunk-WE6TNQJU.js";
+import "./chunk-C4K3FEQ2.js";
 import "./chunk-ZERZSAZL.js";
 import "./chunk-QN5NZ3UQ.js";
 import "./chunk-BR4QREVK.js";

package/chunks/{anthropicContentGenerator-5S4OMMNL.js → anthropicContentGenerator-6MCH4X6S.js}

@@ -3,30 +3,31 @@
 import {
   require_abort_controller,
   require_lib
-} from "./chunk-KQIKOTQJ.js";
+} from "./chunk-RYLJU2DY.js";
 import {
   RequestTokenizer
-} from "./chunk-CX3SGIPK.js";
+} from "./chunk-JRVB4QUY.js";
 import {
   Blob,
   File,
   isFile,
   isFunction
 } from "./chunk-P3MYAZBY.js";
-import {
-  buildRuntimeFetchOptions,
-  redactProxyError
-} from "./chunk-42HGOMED.js";
 import {
   CAPPED_DEFAULT_MAX_TOKENS,
   DEFAULT_TIMEOUT,
-  convertSchema,
+  buildRuntimeFetchOptions,
   hasExplicitOutputLimit,
   parsePositiveIntegerEnvValue,
-  runtimeDiagnostics,
-  safeJsonParse,
+  redactProxyError,
   tokenLimit
-} from "./chunk-G4BUMVEY.js";
+} from "./chunk-JDV3VBPY.js";
+import {
+  convertSchema,
+  runtimeDiagnostics,
+  safeJsonParse
+} from "./chunk-CGEGHF2C.js";
+import "./chunk-EJYJYJZ2.js";
 import {
   FinishReason,
   GenerateContentResponse
@@ -35,7 +36,7 @@ import "./chunk-H6BD2ELD.js";
 import "./chunk-5IFG2VC4.js";
 import {
   createDebugLogger
-} from "./chunk-WE6TNQJU.js";
+} from "./chunk-C4K3FEQ2.js";
 import {
   require_ms
 } from "./chunk-BR4QREVK.js";