@quicknode/sdk 3.1.0-alpha.17 → 3.1.0

package/index.d.ts

@@ -1,109 +1,84 @@
-/* tslint:disable */
-/* eslint-disable */
-
 /* auto-generated by NAPI-RS */
-
-/** A single line item on an invoice. */
-export interface InvoiceLine {
-  /** Human-readable description of the line item. */
-  description: string
-  /** Line item amount in the smallest currency unit. */
-  amount: number
-}
-/** An invoice issued to the account. */
-export interface Invoice {
-  /** Unique invoice identifier. */
-  id: string
-  /** Payment status (e.g. `paid`, `open`). */
-  status: string
-  /** Reason the invoice was generated (e.g. `subscription_cycle`). */
-  billingReason: string
-  /** Line items contributing to the invoice total. */
-  lines: Array<InvoiceLine>
-  /** Amount due in the smallest currency unit. */
-  amountDue: number
-  /** Amount already paid in the smallest currency unit. */
-  amountPaid: number
-  /** Start of the billing period (Unix timestamp). */
-  periodStart: number
-  /** End of the billing period (Unix timestamp). */
-  periodEnd: number
-  /** Timestamp when the invoice was created (Unix timestamp). */
-  created: number
-  /** Subtotal before taxes and adjustments. */
-  subtotal: number
-}
-/** Response from `list_invoices`. */
-export interface ListInvoicesResponse {
-  /** Invoice data payload. */
-  data?: ListInvoicesData
-  /** Error message when the request did not succeed. */
-  error?: string
+/* eslint-disable */
+/** An account-level tag, shared across endpoints. */
+export interface AccountTag {
+  /** Tag identifier. */
+  id: number
+  /** Tag label. */
+  label: string
+  /** Number of endpoints the tag is applied to. */
+  usageCount: number
 }
-/** Invoice list wrapper. */
-export interface ListInvoicesData {
-  /** Invoices on the account. */
-  invoices: Array<Invoice>
+
+/** Parameters for `activate_webhook`. */
+export interface ActivateWebhookParams {
+  /** Position to begin (or resume) delivery from. */
+  startFrom: WebhookStartFrom
 }
-/** A payment recorded on the account. */
-export interface Payment {
-  /** Payment amount as a string in the account's currency. */
-  amount: string
-  /** Last four digits of the card used for the payment. */
-  cardLast4?: string
-  /** Timestamp when the payment was recorded. */
-  createdAt: string
-  /** Currency code (e.g. `usd`). */
-  currency: string
-  /** Payment status. */
-  status: string
-  /** Portion of the payment attributed to marketplace spending. */
-  marketplaceAmount?: string
+
+/** Parameters for `add_list_item`. */
+export interface AddListItemParams {
+  /** Item to append to the list. */
+  item: string
 }
-/** Response from `list_payments`. */
-export interface ListPaymentsResponse {
-  /** Payment data payload. */
-  data?: ListPaymentsData
-  /** Error message when the request did not succeed. */
-  error?: string
+
+/**
+ * Links a stream's filter to an address book so JSON paths resolve against its
+ * managed address set.
+ */
+export interface AddressBookConfig {
+  /** Identifier of the address book to use. */
+  addressBookId: string
+  /** Optional JSON path that resolves to an object whose fields are matched against the book. */
+  objectsFilterPath?: string
+  /** JSON paths whose resolved values are matched against the book's addresses. */
+  elementsFilterPaths: Array<string>
 }
-/** Payment list wrapper. */
-export interface ListPaymentsData {
-  /** Payments on the account. */
-  payments: Array<Payment>
+
+export interface AdminConfig {
+  baseUrl?: string
 }
-/** Parameters for `bulk_update_endpoint_status`. */
-export interface BulkUpdateEndpointStatusRequest {
-  /** Endpoint ids to update. */
-  ids: Array<string>
-  /** Target status (`active` or `paused`). */
-  status: string
+
+/** Configuration for delivering stream batches to Azure Blob Storage. */
+export interface AzureAttributes {
+  /** Azure storage account name. */
+  storageAccount: string
+  /** SAS token used to authorize writes. */
+  sasToken: string
+  /** Container that receives written blobs. */
+  container: string
+  /** Compression applied to written blobs (e.g. `none`, `gzip`). */
+  compression: string
+  /** File format/extension for written blobs (e.g. `.json`). */
+  fileType: string
+  /** Maximum number of retry attempts for a failed write. */
+  maxRetry: number
+  /** Seconds to wait between retry attempts. */
+  retryIntervalSec: number
+  /** Optional name prefix prepended to each written blob. */
+  blobPrefix?: string
 }
-/** Per-endpoint result within a bulk response. */
-export interface BulkOperationResult {
-  /** Endpoint id the result refers to. */
-  id: string
-  /** Whether the operation succeeded for this endpoint. */
-  success: boolean
+
+/** Template arguments for a Bitcoin wallet filter. */
+export interface BitcoinWalletFilterTemplate {
+  /** Bitcoin wallet addresses to match against. */
+  wallets: Array<string>
 }
-/** Summary data for a `bulk_update_endpoint_status` response. */
-export interface BulkUpdateEndpointStatusData {
+
+/** Summary data for a `bulk_add_tag` response. */
+export interface BulkAddTagData {
   /** Total number of endpoints processed. */
   total: number
-  /** Number successfully updated. */
+  /** Number successfully tagged. */
   updatedCount: number
   /** Number that failed. */
   failedCount: number
   /** Per-endpoint outcomes. */
   results: Array<BulkOperationResult>
+  /** The tag that was applied. */
+  tag: BulkTag
 }
-/** Response from `bulk_update_endpoint_status`. */
-export interface BulkUpdateEndpointStatusResponse {
-  /** Bulk update summary. */
-  data?: BulkUpdateEndpointStatusData
-  /** Error message when the request did not succeed. */
-  error?: string
-}
+
 /** Parameters for `bulk_add_tag`. */
 export interface BulkAddTagRequest {
   /** Endpoint ids to tag. */
@@ -111,33 +86,35 @@ export interface BulkAddTagRequest {
   /** Label of the tag to apply (created if it doesn't exist). Maximum 25 characters. */
   label: string
 }
-/** Tag reference returned on bulk tag operations. */
-export interface BulkTag {
-  /** Tag identifier. */
-  tagId: number
-  /** Tag label. */
-  label: string
+
+/** Response from `bulk_add_tag`. */
+export interface BulkAddTagResponse {
+  /** Bulk add-tag summary. */
+  data?: BulkAddTagData
+  /** Error message when the request did not succeed. */
+  error?: string
 }
-/** Summary data for a `bulk_add_tag` response. */
-export interface BulkAddTagData {
+
+/** Per-endpoint result within a bulk response. */
+export interface BulkOperationResult {
+  /** Endpoint id the result refers to. */
+  id: string
+  /** Whether the operation succeeded for this endpoint. */
+  success: boolean
+}
+
+/** Summary data for a `bulk_remove_tag` response. */
+export interface BulkRemoveTagData {
   /** Total number of endpoints processed. */
   total: number
-  /** Number successfully tagged. */
+  /** Number successfully updated. */
   updatedCount: number
   /** Number that failed. */
   failedCount: number
   /** Per-endpoint outcomes. */
   results: Array<BulkOperationResult>
-  /** The tag that was applied. */
-  tag: BulkTag
-}
-/** Response from `bulk_add_tag`. */
-export interface BulkAddTagResponse {
-  /** Bulk add-tag summary. */
-  data?: BulkAddTagData
-  /** Error message when the request did not succeed. */
-  error?: string
 }
+
 /** Parameters for `bulk_remove_tag`. */
 export interface BulkRemoveTagRequest {
   /** Endpoint ids to untag. */
@@ -145,8 +122,33 @@ export interface BulkRemoveTagRequest {
   /** Tag to remove. */
   tagId: number
 }
-/** Summary data for a `bulk_remove_tag` response. */
-export interface BulkRemoveTagData {
+
+/** Response from `bulk_remove_tag`. */
+export interface BulkRemoveTagResponse {
+  /** Bulk remove-tag summary. */
+  data?: BulkRemoveTagData
+  /** Error message when the request did not succeed. */
+  error?: string
+}
+
+/** Parameters for `bulk_sets`. Either or both fields may be supplied. */
+export interface BulkSetsParams {
+  /** Key/value pairs to add. */
+  addSets?: Record<string, string>
+  /** Keys to delete. */
+  deleteSets?: Array<string>
+}
+
+/** Tag reference returned on bulk tag operations. */
+export interface BulkTag {
+  /** Tag identifier. */
+  tagId: number
+  /** Tag label. */
+  label: string
+}
+
+/** Summary data for a `bulk_update_endpoint_status` response. */
+export interface BulkUpdateEndpointStatusData {
   /** Total number of endpoints processed. */
   total: number
   /** Number successfully updated. */
@@ -156,22 +158,23 @@ export interface BulkRemoveTagData {
   /** Per-endpoint outcomes. */
   results: Array<BulkOperationResult>
 }
-/** Response from `bulk_remove_tag`. */
-export interface BulkRemoveTagResponse {
-  /** Bulk remove-tag summary. */
-  data?: BulkRemoveTagData
+
+/** Parameters for `bulk_update_endpoint_status`. */
+export interface BulkUpdateEndpointStatusRequest {
+  /** Endpoint ids to update. */
+  ids: Array<string>
+  /** Target status (`active` or `paused`). */
+  status: string
+}
+
+/** Response from `bulk_update_endpoint_status`. */
+export interface BulkUpdateEndpointStatusResponse {
+  /** Bulk update summary. */
+  data?: BulkUpdateEndpointStatusData
   /** Error message when the request did not succeed. */
   error?: string
 }
-/** A network within a supported chain. */
-export interface ChainNetwork {
-  /** Network slug (e.g. `mainnet`). */
-  slug: string
-  /** Human-readable network name. */
-  name: string
-  /** Numeric chain id, when applicable. */
-  chainId?: number
-}
+
 /** A blockchain supported by Quicknode along with its networks. */
 export interface Chain {
   /** Chain slug (e.g. `ethereum`). */
@@ -181,81 +184,71 @@ export interface Chain {
   /** Whether the chain is shown in selection UIs. */
   isSelectChain?: boolean
 }
-/** Response from `list_chains`. */
-export interface ListChainsResponse {
-  /** Supported chains and their networks. */
-  data: Array<Chain>
-  /** Error message when the request did not succeed. */
-  error?: string
-}
-/** Parameters for `get_endpoint_metrics`. */
-export interface GetEndpointMetricsRequest {
-  /** Time period (`hour`, `day`, `week`, or `month`). */
-  period: string
-  /** Metric name (e.g. `method_calls_over_time`, `response_status_breakdown`). */
-  metric: string
+
+/** A network within a supported chain. */
+export interface ChainNetwork {
+  /** Network slug (e.g. `mainnet`). */
+  slug: string
+  /** Human-readable network name. */
+  name: string
+  /** Numeric chain id, when applicable. */
+  chainId?: number
 }
-/** Parameters for `get_account_metrics`. */
-export interface GetAccountMetricsRequest {
-  /** Time period (`hour`, `day`, `week`, or `month`). */
-  period: string
-  /** Metric name (e.g. `method_calls_over_time`, `credits_over_time`). */
-  metric: string
-  /** Optional percentile for latency metrics (e.g. `p50`, `p95`, `p99`). */
-  percentile?: string
+
+/** Per-chain usage row. */
+export interface ChainUsage {
+  /** Chain name or slug. */
+  name: string
+  /** Credits consumed on the chain. */
+  creditsUsed: number
 }
-/** A single metric series, consisting of a descriptive tag and timestamped data points. */
-export interface EndpointMetric {
-  /** Data points, each as `[timestamp, value]`. */
-  data: Array<Array<number>>
-  /**
-   * Tag identifying the series. Single-axis metrics return a one-element
-   * vector (e.g. `["total"]`, `["p95"]`); multi-axis metrics return the
-   * key/value pair (e.g. `["network", "arbitrum-mainnet"]`).
-   */
-  tag: Array<string>
+
+/** Parameters for `create_domain_mask`. */
+export interface CreateDomainMaskRequest {
+  /** Custom domain that will mask the endpoint's Quicknode URL. */
+  domainMask?: string
 }
-/** Response from `get_endpoint_metrics`. */
-export interface GetEndpointMetricsResponse {
-  /** Metric series returned for the endpoint. */
-  data: Array<EndpointMetric>
-  /** Error message when the request did not succeed. */
-  error?: string
+
+/** Parameters for `create_endpoint`. */
+export interface CreateEndpointRequest {
+  /** Blockchain the endpoint should serve (e.g. `ethereum`). */
+  chain?: string
+  /** Specific network within the chain (e.g. `mainnet`). */
+  network?: string
 }
-/** Response from `get_account_metrics`. */
-export interface GetAccountMetricsResponse {
-  /** Metric series returned for the account. */
-  data: Array<EndpointMetric>
+
+/** Response from `create_endpoint`. */
+export interface CreateEndpointResponse {
+  /** The newly created endpoint. */
+  data: SingleEndpoint
   /** Error message when the request did not succeed. */
   error?: string
 }
-/** A per-method rate limiter configured on an endpoint. */
-export interface MethodRateLimiter {
-  /** Rate limiter identifier. */
-  id: string
-  /** Interval over which the rate applies (e.g. `second`, `minute`). */
-  interval: string
-  /** RPC methods the limiter applies to. */
-  methods: Array<string>
-  /** Maximum number of calls allowed per interval. */
-  rate: number
-  /** Whether the limiter is `enabled` or `disabled`. */
-  status: string
-  /** Creation timestamp. */
-  created: string
+
+/** Parameters for `create_ip`. */
+export interface CreateIpRequest {
+  /** IP address to whitelist. */
+  ip?: string
 }
-/** Inner data for `get_method_rate_limits`. */
-export interface GetMethodRateLimitsData {
-  /** Rate limiters configured on the endpoint. */
-  rateLimiters: Array<MethodRateLimiter>
+
+/** Parameters for `create_jwt`. */
+export interface CreateJwtRequest {
+  /** Public key used to verify signed JWTs. */
+  publicKey?: string
+  /** Key identifier (`kid`) embedded in JWT headers. */
+  kid?: string
+  /** Human-readable name for the JWT configuration. */
+  name?: string
 }
-/** Response from `get_method_rate_limits`. */
-export interface GetMethodRateLimitsResponse {
-  /** Rate limiters payload. */
-  data?: GetMethodRateLimitsData
-  /** Error message when the request did not succeed. */
-  error?: string
+
+/** Parameters for `create_list`. */
+export interface CreateListParams {
+  /** Unique key identifying the list. */
+  key: string
+  /** Initial items inserted into the list. */
+  items: Array<string>
 }
+
 /** Parameters for `create_method_rate_limit`. */
 export interface CreateMethodRateLimitRequest {
   /** Interval over which the rate applies (e.g. `second`). */
@@ -265,6 +258,7 @@ export interface CreateMethodRateLimitRequest {
   /** Maximum number of calls allowed per interval. */
   rate: number
 }
+
 /** Response from `create_method_rate_limit`. */
 export interface CreateMethodRateLimitResponse {
   /** The created rate limiter. */
@@ -272,182 +266,101 @@ export interface CreateMethodRateLimitResponse {
   /** Error message when the request did not succeed. */
   error?: string
 }
-/** Parameters for `update_method_rate_limit`. Only provided fields are changed. */
-export interface UpdateMethodRateLimitRequest {
-  /** New set of RPC methods the limiter applies to. */
-  methods?: Array<string>
-  /** New status (`enabled` or `disabled`). */
-  status?: string
-  /** New rate value. */
-  rate?: number
+
+/** Parameters for `create_or_update_ip_custom_header`. */
+export interface CreateOrUpdateIpCustomHeaderRequest {
+  /** Header name used to identify the client IP (e.g. `X-Forwarded-For`). */
+  headerName: string
 }
-/** Response from `update_method_rate_limit`. */
-export interface UpdateMethodRateLimitResponse {
-  /** The updated rate limiter. */
-  data?: MethodRateLimiter
+
+/** Response from `create_or_update_ip_custom_header`. */
+export interface CreateOrUpdateIpCustomHeaderResponse {
+  /** Stored header configuration. */
+  data?: IpCustomHeaderData
   /** Error message when the request did not succeed. */
   error?: string
 }
-/** Endpoint-wide rate limit settings. */
-export interface RateLimitSettings {
-  /** Requests per second. */
-  rps?: number
-  /** Requests per minute. */
-  rpm?: number
-  /** Requests per day. */
-  rpd?: number
+
+/** Parameters for `create_referrer`. */
+export interface CreateReferrerRequest {
+  /** Allowed referrer URL or domain. */
+  referrer?: string
 }
-/** Parameters for `update_rate_limits`. */
-export interface UpdateRateLimitsRequest {
-  /** Rate limit values to apply. */
-  rateLimits: RateLimitSettings
+
+/** Data wrapper for a created request filter. */
+export interface CreateRequestFilterData {
+  /** Identifier of the newly created request filter. */
+  id: string
 }
-/**
- * A single rate-limit row returned by `get_rate_limits`, identifying the
- * bucket (`rps`/`rpm`/`rpd`), the value enforced, and whether the value comes
- * from the plan default or a user-set override.
- */
-export interface RateLimitEntry {
-  /** Which bucket this row applies to: `rps`, `rpm`, or `rpd`. */
-  bucket: string
-  /** The enforced value for this bucket. */
-  rateLimit: number
-  /** Where the value comes from: `plan_default` or `user_override`. */
-  source: string
-  /**
-   * Row identifier. Present on `user_override` rows — pass it to
-   * `delete_rate_limit_override` to remove the override. May be absent on
-   * `plan_default` rows and cannot be deleted there.
-   */
-  id?: string
+
+/** Parameters for `create_request_filter`. */
+export interface CreateRequestFilterRequest {
+  /** Whitelisted RPC methods; other methods will be blocked. */
+  method?: Array<string>
 }
-/** Inner data for `get_rate_limits`. */
-export interface GetRateLimitsData {
-  /** One row per enforced bucket. */
-  rateLimits: Array<RateLimitEntry>
+
+/** Response from `create_request_filter`. */
+export interface CreateRequestFilterResponse {
+  /** The created filter payload. */
+  data?: CreateRequestFilterData
+  /** Error message when the request did not succeed. */
+  error?: string
 }
-/** Response from `get_rate_limits`. */
-export interface GetRateLimitsResponse {
-  /** Rate-limit rows with their source. */
-  data?: GetRateLimitsData
+
+/** Parameters for `create_set`. */
+export interface CreateSetParams {
+  /** Unique key identifying the set. */
+  key: string
+  /** String value stored under the key. */
+  value: string
+}
+
+/** Parameters for `create_tag` (on a specific endpoint). */
+export interface CreateTagRequest {
+  /** Label for the new tag. Maximum 25 characters. */
+  label?: string
+}
+
+/** Inner data for `create_team` responses. */
+export interface CreateTeamData {
+  /** Team identifier. */
+  id: number
+  /** Team name. */
+  name: string
+  /** Default role for newly invited members. */
+  defaultRole?: string
+  /** Initial member count. */
+  membersCount?: number
+}
+
+/** Parameters for `create_team`. */
+export interface CreateTeamRequest {
+  /** Team name. */
+  name: string
+}
+
+/** Response from `create_team`. */
+export interface CreateTeamResponse {
+  /** The newly created team. */
+  data?: CreateTeamData
   /** Error message when the request did not succeed. */
   error?: string
 }
-/** A single security feature's name, status, and optional value. */
-export interface SecurityOption {
-  /** Name of the security feature (e.g. `tokens`, `jwts`, `ips`). */
-  option: string
-  /** Whether the feature is `enabled` or `disabled`. */
-  status: string
-  /** Optional configuration value associated with the feature. */
-  value?: string
+
+/** Inner data for `delete_account_tag`. */
+export interface DeleteAccountTagData {
+  /** `true` when the tag was deleted. */
+  success: boolean
 }
-/** Response from `get_security_options`. */
-export interface GetSecurityOptionsResponse {
-  /** Security options on the endpoint. */
-  data: Array<SecurityOption>
-  /** Error message when the request did not succeed. */
-  error?: string
-}
-/**
- * Per-feature toggles for `update_security_options`. Each field accepts
- * `enabled` or `disabled`.
- */
-export interface SecurityOptionsUpdate {
-  /** Token authentication toggle. */
-  tokens?: string
-  /** Referrer validation toggle. */
-  referrers?: string
-  /** JWT validation toggle. */
-  jwts?: string
-  /** IP whitelist toggle. */
-  ips?: string
-  /** Domain masking toggle. */
-  domainMasks?: string
-  /** HSTS (HTTP Strict Transport Security) toggle. */
-  hsts?: string
-  /** CORS toggle. */
-  cors?: string
-  /** Request (method) filter toggle. */
-  requestFilters?: string
-  /** Custom IP header toggle. */
-  ipCustomHeader?: string
-}
-/** Parameters for `update_security_options`. */
-export interface UpdateSecurityOptionsRequest {
-  /** Security toggles to apply. */
-  options: SecurityOptionsUpdate
-}
-/** Response from `update_security_options`. */
-export interface UpdateSecurityOptionsResponse {
-  /** Updated security options. */
-  data: Array<SecurityOption>
-  /** Error message when the request did not succeed. */
-  error?: string
-}
-/** Parameters for `create_referrer`. */
-export interface CreateReferrerRequest {
-  /** Allowed referrer URL or domain. */
-  referrer?: string
-}
-/** Parameters for `create_ip`. */
-export interface CreateIpRequest {
-  /** IP address to whitelist. */
-  ip?: string
-}
-/** Parameters for `create_domain_mask`. */
-export interface CreateDomainMaskRequest {
-  /** Custom domain that will mask the endpoint's Quicknode URL. */
-  domainMask?: string
-}
-/** Parameters for `create_jwt`. */
-export interface CreateJwtRequest {
-  /** Public key used to verify signed JWTs. */
-  publicKey?: string
-  /** Key identifier (`kid`) embedded in JWT headers. */
-  kid?: string
-  /** Human-readable name for the JWT configuration. */
-  name?: string
-}
-/** Parameters for `create_request_filter`. */
-export interface CreateRequestFilterRequest {
-  /** Whitelisted RPC methods; other methods will be blocked. */
-  method?: Array<string>
-}
-/** Response from `create_request_filter`. */
-export interface CreateRequestFilterResponse {
-  /** The created filter payload. */
-  data?: CreateRequestFilterData
-  /** Error message when the request did not succeed. */
-  error?: string
-}
-/** Data wrapper for a created request filter. */
-export interface CreateRequestFilterData {
-  /** Identifier of the newly created request filter. */
-  id: string
-}
-/** Parameters for `update_request_filter`. */
-export interface UpdateRequestFilterRequest {
-  /** New set of whitelisted RPC methods. */
-  method?: Array<string>
-}
-/** Parameters for `create_or_update_ip_custom_header`. */
-export interface CreateOrUpdateIpCustomHeaderRequest {
-  /** Header name used to identify the client IP (e.g. `X-Forwarded-For`). */
-  headerName: string
-}
-/** Data wrapper for the IP custom header configuration. */
-export interface IpCustomHeaderData {
-  /** Configured header name. */
-  headerName: string
-}
-/** Response from `create_or_update_ip_custom_header`. */
-export interface CreateOrUpdateIpCustomHeaderResponse {
-  /** Stored header configuration. */
-  data?: IpCustomHeaderData
+
+/** Response from `delete_account_tag`. */
+export interface DeleteAccountTagResponse {
+  /** Deletion result. */
+  data?: DeleteAccountTagData
   /** Error message when the request did not succeed. */
   error?: string
 }
+
 /** Response wrapper for delete operations that return a boolean success flag. */
 export interface DeleteBoolResponse {
   /** `true` when the deletion succeeded. */
@@ -455,77 +368,27 @@ export interface DeleteBoolResponse {
   /** Error message when the request did not succeed. */
   error?: string
 }
-/** HTTP/WSS URL pair for a single network on a multichain endpoint. */
-export interface EndpointUrl {
-  /** HTTP RPC URL. */
-  httpUrl: string
-  /** WebSocket RPC URL, when available. */
-  wssUrl?: string
-}
-/**
- * Inner data for `get_endpoint_urls` — the http/wss URLs for the endpoint and,
- * when the endpoint is multichain, a per-network map of additional URLs.
- */
-export interface GetEndpointUrlsData {
-  /** HTTP RPC URL. */
-  httpUrl: string
-  /** WebSocket RPC URL, when available. */
-  wssUrl?: string
-  /** Per-network URLs for multichain endpoints; `None` for single-chain endpoints. */
-  multichainUrls?: Record<string, EndpointUrl>
-}
-/** Response from `get_endpoint_urls`. */
-export interface GetEndpointUrlsResponse {
-  /** URLs for the endpoint. */
-  data?: GetEndpointUrlsData
-  /** Error message when the request did not succeed. */
-  error?: string
-}
-/** Parameters for `get_endpoints`. */
-export interface GetEndpointsRequest {
-  /** Maximum number of endpoints returned. */
-  limit?: number
-  /** Starting index into the result set. */
-  offset?: number
-  /** Search by subdomain or label. */
-  search?: string
-  /** Field to sort results by. */
-  sortBy?: string
-  /** Sort direction (`asc` or `desc`). */
-  sortDirection?: string
-  /** Filter results to endpoints on these networks. */
-  networks?: Array<string>
-  /** Filter results to endpoints in these statuses. */
-  statuses?: Array<string>
-  /** Filter results by label. */
-  labels?: Array<string>
-  /** When true, return only dedicated endpoints. */
-  dedicated?: boolean
-  /** When true, return only flat-rate endpoints. */
-  isFlatRate?: boolean
-  /** Filter results by associated tag ids. */
-  tagIds?: Array<number>
-  /** Filter results by associated tag labels. */
-  tagLabels?: Array<string>
+
+/** Inner data for `delete_team` responses. */
+export interface DeleteTeamData {
+  /** Human-readable confirmation message. */
+  message?: string
 }
-/** Response from `get_endpoints`. */
-export interface GetEndpointsResponse {
-  /** Endpoints on the current page. */
-  data: Array<Endpoint>
-  /** Pagination metadata for the response. */
-  pagination?: Pagination
+
+/** Response from `delete_team`. */
+export interface DeleteTeamResponse {
+  /** Deletion result payload. */
+  data?: DeleteTeamData
   /** Error message when the request did not succeed. */
   error?: string
 }
-/** Pagination metadata for admin list responses. */
-export interface Pagination {
-  /** Total number of items matching the query across all pages. */
+
+/** Result of `get_enabled_count`. */
+export interface EnabledCountResponse {
+  /** Total count of currently enabled streams. */
   total: number
-  /** Page size used for this response. */
-  limit: number
-  /** Starting index of this page within the full result set. */
-  offset: number
 }
+
 /** Summary representation of an endpoint in list responses. */
 export interface Endpoint {
   /** Unique endpoint identifier. */
@@ -553,65 +416,105 @@ export interface Endpoint {
   /** Whether the endpoint is configured to serve multiple chains/networks. */
   isMultichain: boolean
 }
-/** Tag reference as returned on an endpoint. */
-export interface EndpointTag {
-  /** Tag identifier. */
-  tagId: number
-  /** Tag label. */
-  label: string
+
+/** Domain mask configured on an endpoint. */
+export interface EndpointDomainMask {
+  /** Domain mask identifier. */
+  id: string
+  /** Masking domain. */
+  domain: string
 }
-/** Parameters for `create_endpoint`. */
-export interface CreateEndpointRequest {
-  /** Blockchain the endpoint should serve (e.g. `ethereum`). */
-  chain?: string
-  /** Specific network within the chain (e.g. `mainnet`). */
-  network?: string
+
+/** Whitelisted IP address on an endpoint. */
+export interface EndpointIp {
+  /** IP entry identifier. */
+  id: string
+  /** Whitelisted IP address. */
+  ip: string
 }
-/** Response from `create_endpoint`. */
-export interface CreateEndpointResponse {
-  /** The newly created endpoint. */
-  data: SingleEndpoint
-  /** Error message when the request did not succeed. */
-  error?: string
+
+/** Custom header option value for IP identification. */
+export interface EndpointIpCustomHeaderOption {
+  /** Header name (e.g. `X-Forwarded-For`). */
+  value?: string
 }
-/** Full representation of a single endpoint, including its security and rate limits. */
-export interface SingleEndpoint {
-  /** Unique endpoint identifier. */
+
+/** JWT configured on an endpoint for signed-request authentication. */
+export interface EndpointJwt {
+  /** JWT identifier. */
   id: string
-  /** Human-readable label. */
-  label?: string
-  /** Current operational status. */
-  status?: string
-  /** Blockchain the endpoint serves. */
-  chain: string
-  /** Specific network within the chain. */
-  network: string
-  /** HTTP RPC URL. */
-  httpUrl: string
-  /** WebSocket RPC URL, when available. */
-  wssUrl?: string
-  /** Endpoint security configuration. */
-  security?: EndpointSecurity
-  /** Endpoint rate limits. */
-  rateLimits?: EndpointRateLimits
-  /** Tags applied to the endpoint. */
-  tags: Array<EndpointTag>
-  /** Whether the endpoint is configured to serve multiple chains/networks. */
-  isMultichain: boolean
+  /** Public key used to verify signed JWTs. */
+  publicKey: string
+  /** Key identifier (`kid`) embedded in JWT headers. */
+  kid: string
+  /** Human-readable name. */
+  name: string
 }
-/** Rate limits applied to an endpoint. */
-export interface EndpointRateLimits {
-  /** Whether rate limits are applied per client IP instead of per endpoint. */
-  rateLimitByIp?: boolean
-  /** Account-level rate limit, when applicable. */
-  account?: number
-  /** Requests per second. */
-  rps?: number
+
+/** A single endpoint log entry. */
+export interface EndpointLog {
+  /** Time the request was received. */
+  timestamp: string
+  /** RPC method called (e.g. `eth_blockNumber`). */
+  method?: string
+  /** Network the request was routed to. */
+  network?: string
+  /** HTTP verb (e.g. `POST`). */
+  httpMethod?: string
+  /** Response HTTP status code. */
+  status?: number
+  /** JSON-RPC error code, when present. */
+  errorCode?: number
+  /** Request URL. */
+  url?: string
+  /** Request UUID used to fetch full log details. */
+  requestId?: string
+  /** Full payloads, included when requested. */
+  details?: LogDetails
+}
+
+/** A single metric series, consisting of a descriptive tag and timestamped data points. */
+export interface EndpointMetric {
+  /** Data points, each as `[timestamp, value]`. */
+  data: Array<Array<number>>
+  /**
+   * Tag identifying the series. Single-axis metrics return a one-element
+   * vector (e.g. `["total"]`, `["p95"]`); multi-axis metrics return the
+   * key/value pair (e.g. `["network", "arbitrum-mainnet"]`).
+   */
+  tag: Array<string>
+}
+
+/** Rate limits applied to an endpoint. */
+export interface EndpointRateLimits {
+  /** Whether rate limits are applied per client IP instead of per endpoint. */
+  rateLimitByIp?: boolean
+  /** Account-level rate limit, when applicable. */
+  account?: number
+  /** Requests per second. */
+  rps?: number
   /** Requests per minute. */
   rpm?: number
   /** Requests per day. */
   rpd?: number
 }
+
+/** Allowed referrer entry for request-origin validation. */
+export interface EndpointReferrer {
+  /** Referrer entry identifier. */
+  id: string
+  /** Allowed referrer URL or domain. */
+  referrer?: string
+}
+
+/** Request (method) filter configured on an endpoint. */
+export interface EndpointRequestFilter {
+  /** Filter identifier. */
+  id: string
+  /** Whitelisted RPC methods. */
+  method: Array<string>
+}
+
 /**
  * Security configuration for an endpoint — the aggregate of tokens, JWTs,
  * referrers, domain masks, IPs, and request filters plus their enabled
@@ -633,6 +536,7 @@ export interface EndpointSecurity {
   /** Request (method) filters. */
   requestFilters?: Array<EndpointRequestFilter>
 }
+
 /** Boolean toggles controlling which security features are enabled. */
 export interface EndpointSecurityOptions {
   /** Whether token authentication is enforced. */
@@ -650,11 +554,15 @@ export interface EndpointSecurityOptions {
   /** Custom header used to identify the client IP. */
   ipCustomHeader?: EndpointIpCustomHeaderOption
 }
-/** Custom header option value for IP identification. */
-export interface EndpointIpCustomHeaderOption {
-  /** Header name (e.g. `X-Forwarded-For`). */
-  value?: string
+
+/** Tag reference as returned on an endpoint. */
+export interface EndpointTag {
+  /** Tag identifier. */
+  tagId: number
+  /** Tag label. */
+  label: string
 }
+
 /** Authentication token configured on an endpoint. */
 export interface EndpointToken {
   /** Token identifier. */
@@ -662,81 +570,91 @@ export interface EndpointToken {
   /** Token secret. */
   token: string
 }
-/** JWT configured on an endpoint for signed-request authentication. */
-export interface EndpointJwt {
-  /** JWT identifier. */
-  id: string
-  /** Public key used to verify signed JWTs. */
-  publicKey: string
-  /** Key identifier (`kid`) embedded in JWT headers. */
-  kid: string
-  /** Human-readable name. */
-  name: string
-}
-/** Allowed referrer entry for request-origin validation. */
-export interface EndpointReferrer {
-  /** Referrer entry identifier. */
-  id: string
-  /** Allowed referrer URL or domain. */
-  referrer?: string
-}
-/** Domain mask configured on an endpoint. */
-export interface EndpointDomainMask {
-  /** Domain mask identifier. */
-  id: string
-  /** Masking domain. */
-  domain: string
-}
-/** Whitelisted IP address on an endpoint. */
-export interface EndpointIp {
-  /** IP entry identifier. */
-  id: string
-  /** Whitelisted IP address. */
-  ip: string
+
+/** HTTP/WSS URL pair for a single network on a multichain endpoint. */
+export interface EndpointUrl {
+  /** HTTP RPC URL. */
+  httpUrl: string
+  /** WebSocket RPC URL, when available. */
+  wssUrl?: string
 }
-/** Request (method) filter configured on an endpoint. */
-export interface EndpointRequestFilter {
-  /** Filter identifier. */
-  id: string
-  /** Whitelisted RPC methods. */
-  method: Array<string>
+
+/** Per-endpoint usage row. */
+export interface EndpointUsage {
+  /** Endpoint subdomain. */
+  name: string
+  /** Blockchain the endpoint serves. */
+  chain?: string
+  /** Network within the chain. */
+  network?: string
+  /** Operational status during the window. */
+  status?: string
+  /** Total credits consumed by this endpoint. */
+  creditsUsed: number
+  /** Human-readable label. */
+  label?: string
+  /** Per-method credit breakdown. */
+  methodsBreakdown: Array<MethodUsage>
+  /** Request count during the window. */
+  requests?: number
 }
-/** Response from `show_endpoint`. */
-export interface ShowEndpointResponse {
-  /** The endpoint, when found. */
-  data?: SingleEndpoint
-  /** Error message when the request did not succeed. */
-  error?: string
+
+/**
+ * Template arguments for an EVM ABI filter: decodes and filters events for a
+ * set of contracts using a provided ABI.
+ */
+export interface EvmAbiFilterTemplate {
+  /** JSON-encoded contract ABI used to decode event data. */
+  abi: string
+  /** Contract addresses to watch for events. */
+  contracts: Array<string>
 }
-/** Parameters for `update_endpoint`. */
-export interface UpdateEndpointRequest {
-  /** New human-readable label. */
-  label?: string
+
+/**
+ * Template arguments for filtering EVM contract events, optionally scoped to
+ * a specific set of event topic hashes.
+ */
+export interface EvmContractEventsTemplate {
+  /** Contract addresses to watch for events. */
+  contracts: Array<string>
+  /** Optional list of event topic hashes to restrict the filter to specific events. */
+  eventHashes?: Array<string>
 }
-/** Parameters for `update_endpoint_status`. */
-export interface UpdateEndpointStatusRequest {
-  /** New status (`active` or `paused`). */
-  status: string
+
+/**
+ * Template arguments for an EVM wallet filter: matches activity for a list of
+ * wallet addresses.
+ */
+export interface EvmWalletFilterTemplate {
+  /** Wallet addresses to match against. */
+  wallets: Array<string>
 }
-/** Response from `update_endpoint_status`. */
-export interface UpdateEndpointStatusResponse {
-  /** Confirmation string returned by the API. */
-  data?: string
-  /** Error message when the request did not succeed. */
-  error?: string
+
+/** Language a stream's filter function is written in. */
+export declare const enum FilterLanguage {
+  Javascript = 'Javascript',
+  Go = 'Go',
+  Wasm = 'Wasm'
 }
-/** Parameters for `create_tag` (on a specific endpoint). */
-export interface CreateTagRequest {
-  /** Label for the new tag. Maximum 25 characters. */
-  label?: string
+
+/** Parameters for `get_account_metrics`. */
+export interface GetAccountMetricsRequest {
+  /** Time period (`hour`, `day`, `week`, or `month`). */
+  period: string
+  /** Metric name (e.g. `method_calls_over_time`, `credits_over_time`). */
+  metric: string
+  /** Optional percentile for latency metrics (e.g. `p50`, `p95`, `p99`). */
+  percentile?: string
 }
-/** Response from `get_endpoint_security`. */
-export interface GetEndpointSecurityResponse {
-  /** The endpoint's security configuration. */
-  data?: EndpointSecurity
+
+/** Response from `get_account_metrics`. */
+export interface GetAccountMetricsResponse {
+  /** Metric series returned for the account. */
+  data: Array<EndpointMetric>
   /** Error message when the request did not succeed. */
   error?: string
 }
+
 /** Parameters for `get_endpoint_logs`. */
 export interface GetEndpointLogsRequest {
   /** Start of the query window (timestamp). */
@@ -750,34 +668,7 @@ export interface GetEndpointLogsRequest {
   /** Cursor returned by a previous page; pass to fetch the next page. */
   nextAt?: string
 }
-/** Raw request/response payloads attached to a log entry. */
-export interface LogDetails {
-  /** JSON-encoded request body (truncated at 2KB). */
-  request?: string
-  /** JSON-encoded response body (truncated at 2KB). */
-  response?: string
-}
-/** A single endpoint log entry. */
-export interface EndpointLog {
-  /** Time the request was received. */
-  timestamp: string
-  /** RPC method called (e.g. `eth_blockNumber`). */
-  method?: string
-  /** Network the request was routed to. */
-  network?: string
-  /** HTTP verb (e.g. `POST`). */
-  httpMethod?: string
-  /** Response HTTP status code. */
-  status?: number
-  /** JSON-RPC error code, when present. */
-  errorCode?: number
-  /** Request URL. */
-  url?: string
-  /** Request UUID used to fetch full log details. */
-  requestId?: string
-  /** Full payloads, included when requested. */
-  details?: LogDetails
-}
+
 /** Response from `get_endpoint_logs`. */
 export interface GetEndpointLogsResponse {
   /** Log entries on the current page. */
@@ -785,131 +676,198 @@ export interface GetEndpointLogsResponse {
   /** Cursor for the next page; `None` when there are no more entries. */
   nextAt?: string
 }
-/** Response from `get_log_details`. */
-export interface GetLogDetailsResponse {
-  /** Raw request and response payloads for the log entry. */
-  data?: LogDetails
+
+/** Parameters for `get_endpoint_metrics`. */
+export interface GetEndpointMetricsRequest {
+  /** Time period (`hour`, `day`, `week`, or `month`). */
+  period: string
+  /** Metric name (e.g. `method_calls_over_time`, `response_status_breakdown`). */
+  metric: string
 }
-/** An account-level tag, shared across endpoints. */
-export interface AccountTag {
-  /** Tag identifier. */
-  id: number
-  /** Tag label. */
-  label: string
-  /** Number of endpoints the tag is applied to. */
-  usageCount: number
-}
-/** Inner data wrapper for `list_tags`. */
-export interface ListTagsData {
-  /** Tags on the account. */
-  tags: Array<AccountTag>
+
+/** Response from `get_endpoint_metrics`. */
+export interface GetEndpointMetricsResponse {
+  /** Metric series returned for the endpoint. */
+  data: Array<EndpointMetric>
+  /** Error message when the request did not succeed. */
+  error?: string
 }
-/** Response from `list_tags`. */
-export interface ListTagsResponse {
-  /** Account tags payload. */
-  data?: ListTagsData
+
+/** Response from `get_endpoint_security`. */
+export interface GetEndpointSecurityResponse {
+  /** The endpoint's security configuration. */
+  data?: EndpointSecurity
   /** Error message when the request did not succeed. */
   error?: string
 }
-/** Parameters for `rename_tag`. */
-export interface RenameTagRequest {
-  /** New label for the tag. */
-  label: string
+
+/** Parameters for `get_endpoints`. */
+export interface GetEndpointsRequest {
+  /** Maximum number of endpoints returned. */
+  limit?: number
+  /** Starting index into the result set. */
+  offset?: number
+  /** Search by subdomain or label. */
+  search?: string
+  /** Field to sort results by. */
+  sortBy?: string
+  /** Sort direction (`asc` or `desc`). */
+  sortDirection?: string
+  /** Filter results to endpoints on these networks. */
+  networks?: Array<string>
+  /** Filter results to endpoints in these statuses. */
+  statuses?: Array<string>
+  /** Filter results by label. */
+  labels?: Array<string>
+  /** When true, return only dedicated endpoints. */
+  dedicated?: boolean
+  /** When true, return only flat-rate endpoints. */
+  isFlatRate?: boolean
+  /** Filter results by associated tag ids. */
+  tagIds?: Array<number>
+  /** Filter results by associated tag labels. */
+  tagLabels?: Array<string>
 }
-/** Response from `rename_tag`. */
-export interface RenameTagResponse {
-  /** The renamed tag. */
-  data?: AccountTag
+
+/** Response from `get_endpoints`. */
+export interface GetEndpointsResponse {
+  /** Endpoints on the current page. */
+  data: Array<Endpoint>
+  /** Pagination metadata for the response. */
+  pagination?: Pagination
   /** Error message when the request did not succeed. */
   error?: string
 }
-/** Inner data for `delete_account_tag`. */
-export interface DeleteAccountTagData {
-  /** `true` when the tag was deleted. */
-  success: boolean
+
+/**
+ * Inner data for `get_endpoint_urls` — the http/wss URLs for the endpoint and,
+ * when the endpoint is multichain, a per-network map of additional URLs.
+ */
+export interface GetEndpointUrlsData {
+  /** HTTP RPC URL. */
+  httpUrl: string
+  /** WebSocket RPC URL, when available. */
+  wssUrl?: string
+  /** Per-network URLs for multichain endpoints; `None` for single-chain endpoints. */
+  multichainUrls?: Record<string, EndpointUrl>
 }
-/** Response from `delete_account_tag`. */
-export interface DeleteAccountTagResponse {
-  /** Deletion result. */
-  data?: DeleteAccountTagData
+
+/** Response from `get_endpoint_urls`. */
+export interface GetEndpointUrlsResponse {
+  /** URLs for the endpoint. */
+  data?: GetEndpointUrlsData
   /** Error message when the request did not succeed. */
   error?: string
 }
-/** A team member or pending invitee. */
-export interface TeamUser {
-  /** User identifier. */
-  id: number
-  /** Display name. */
-  fullName?: string
-  /** Email address. */
-  email: string
-  /** Team role (e.g. `admin`, `viewer`, `billing`). */
-  role?: string
-  /** Membership status (e.g. `active`, `pending`). */
-  status?: string
-  /** When the user was added. */
-  createdAt?: string
-  /** Profile photo URL. */
-  photoUrl?: string
-  /** Whether this user is the primary user on the account. */
-  accountPrimaryUser?: boolean
+
+/** Inner data for `get_list` responses. */
+export interface GetListData {
+  /** Items in the list on the current page. */
+  items: Array<string>
 }
-/** Summary representation of a team in list responses. */
-export interface TeamSummary {
-  /** Team identifier. */
-  id: number
-  /** Team name. */
-  name: string
-  /** Current member count. */
-  membersCount?: number
-  /** Active team members. */
-  users: Array<TeamUser>
+
+/** Parameters for `get_list`. */
+export interface GetListParams {
+  /** Maximum number of items returned. */
+  limit?: number
+  /** Cursor returned by a previous page; pass to fetch the next page. */
+  cursor?: string
 }
-/** Full team detail including pending invites. */
-export interface TeamDetail {
-  /** Team identifier. */
-  id: number
-  /** Team name. */
-  name: string
-  /** Default role assigned to newly invited members. */
-  defaultRole?: string
-  /** Current member count. */
-  membersCount?: number
-  /** Active team members. */
-  users: Array<TeamUser>
-  /** Invites that have not yet been accepted. */
-  pendingInvites: Array<TeamUser>
+
+/** Response from `get_list`. */
+export interface GetListResponse {
+  /** Items for the list on the current page. */
+  data: GetListData
+  /** Cursor for the next page; empty string when there are no more pages. */
+  cursor: string
 }
-/** Response from `list_teams`. */
-export interface ListTeamsResponse {
-  /** Teams on the account. */
-  data: Array<TeamSummary>
+
+/** Inner data for `get_lists` responses. */
+export interface GetListsData {
+  /** List keys on the current page. */
+  keys: Array<string>
+}
+
+/** Parameters for `get_lists`. */
+export interface GetListsParams {
+  /** Maximum number of list keys returned. */
+  limit?: number
+  /** Cursor returned by a previous page; pass to fetch the next page. */
+  cursor?: string
+}
+
+/** Response from `get_lists`. */
+export interface GetListsResponse {
+  /** List keys on the current page. */
+  data: GetListsData
+  /** Cursor for the next page; empty string when there are no more pages. */
+  cursor: string
+}
+
+/** Response from `get_log_details`. */
+export interface GetLogDetailsResponse {
+  /** Raw request and response payloads for the log entry. */
+  data?: LogDetails
+}
+
+/** Inner data for `get_method_rate_limits`. */
+export interface GetMethodRateLimitsData {
+  /** Rate limiters configured on the endpoint. */
+  rateLimiters: Array<MethodRateLimiter>
+}
+
+/** Response from `get_method_rate_limits`. */
+export interface GetMethodRateLimitsResponse {
+  /** Rate limiters payload. */
+  data?: GetMethodRateLimitsData
   /** Error message when the request did not succeed. */
   error?: string
 }
-/** Parameters for `create_team`. */
-export interface CreateTeamRequest {
-  /** Team name. */
-  name: string
+
+/** Inner data for `get_rate_limits`. */
+export interface GetRateLimitsData {
+  /** One row per enforced bucket. */
+  rateLimits: Array<RateLimitEntry>
 }
-/** Inner data for `create_team` responses. */
-export interface CreateTeamData {
-  /** Team identifier. */
-  id: number
-  /** Team name. */
-  name: string
-  /** Default role for newly invited members. */
-  defaultRole?: string
-  /** Initial member count. */
-  membersCount?: number
+
+/** Response from `get_rate_limits`. */
+export interface GetRateLimitsResponse {
+  /** Rate-limit rows with their source. */
+  data?: GetRateLimitsData
+  /** Error message when the request did not succeed. */
+  error?: string
 }
-/** Response from `create_team`. */
-export interface CreateTeamResponse {
-  /** The newly created team. */
-  data?: CreateTeamData
+
+/** Response from `get_security_options`. */
+export interface GetSecurityOptionsResponse {
+  /** Security options on the endpoint. */
+  data: Array<SecurityOption>
   /** Error message when the request did not succeed. */
   error?: string
 }
+
+/** Response from `get_set`. */
+export interface GetSetResponse {
+  /** Stored string value. */
+  value: string
+}
+
+/** Parameters for `get_sets`. */
+export interface GetSetsParams {
+  /** Maximum number of entries returned. */
+  limit?: number
+  /** Cursor returned by a previous page; pass to fetch the next page. */
+  cursor?: string
+}
+
+/** Response from `get_sets`. */
+export interface GetSetsResponse {
+  /** Key/value entries on the current page. */
+  data: Array<KvSetEntry>
+  /** Cursor for the next page; empty string when there are no more pages. */
+  cursor: string
+}
+
 /** Response from `get_team`. */
 export interface GetTeamResponse {
   /** The team's full detail. */
@@ -917,53 +875,86 @@ export interface GetTeamResponse {
   /** Error message when the request did not succeed. */
   error?: string
 }
-/** Inner data for `delete_team` responses. */
-export interface DeleteTeamData {
-  /** Human-readable confirmation message. */
-  message?: string
-}
-/** Response from `delete_team`. */
-export interface DeleteTeamResponse {
-  /** Deletion result payload. */
-  data?: DeleteTeamData
+
+/** Response from `get_usage_by_chain`. */
+export interface GetUsageByChainResponse {
+  /** Per-chain usage payload. */
+  data?: UsageByChainData
   /** Error message when the request did not succeed. */
   error?: string
 }
-/** A team's endpoint association. */
-export interface TeamEndpoint {
-  /** Endpoint identifier. */
-  id: number
-  /** Endpoint subdomain. */
-  subdomain: string
-  /** Blockchain the endpoint serves. */
-  chain?: string
-  /** Network within the chain. */
-  network?: string
+
+/** Response from `get_usage_by_endpoint`. */
+export interface GetUsageByEndpointResponse {
+  /** Per-endpoint usage payload. */
+  data?: UsageByEndpointData
+  /** Error message when the request did not succeed. */
+  error?: string
 }
-/** Response from `list_team_endpoints`. */
-export interface ListTeamEndpointsResponse {
-  /** Endpoints accessible to the team. */
-  data: Array<TeamEndpoint>
+
+/** Response from `get_usage_by_method`. */
+export interface GetUsageByMethodResponse {
+  /** Per-method usage payload. */
+  data?: UsageByMethodData
   /** Error message when the request did not succeed. */
   error?: string
 }
-/** Parameters for `update_team_endpoints`. */
-export interface UpdateTeamEndpointsRequest {
-  /** Endpoint ids to associate with the team; pass an empty array to remove all. */
-  endpointIds: Array<string>
+
+/** Response from `get_usage_by_tag`. */
+export interface GetUsageByTagResponse {
+  /** Per-tag usage payload. */
+  data?: UsageByTagData
+  /** Error message when the request did not succeed. */
+  error?: string
 }
-/** Inner data for `update_team_endpoints` responses. */
-export interface UpdateTeamEndpointsData {
-  /** `true` when the association update succeeded. */
-  success?: boolean
+
+/**
+ * Parameters for the account usage methods (`get_usage`, `get_usage_by_*`).
+ * Both bounds are optional; omit for account-to-date totals.
+ */
+export interface GetUsageRequest {
+  /** Start of the query window (Unix timestamp). */
+  startTime?: number
+  /** End of the query window (Unix timestamp). */
+  endTime?: number
 }
-/** Response from `update_team_endpoints`. */
-export interface UpdateTeamEndpointsResponse {
-  /** Update result. */
-  data?: UpdateTeamEndpointsData
+
+/** Response from `get_usage`. */
+export interface GetUsageResponse {
+  /** Aggregate usage payload. */
+  data?: UsageData
   /** Error message when the request did not succeed. */
   error?: string
 }
+
+/** Parameters for `list_webhooks`. */
+export interface GetWebhooksParams {
+  /** Maximum number of webhooks returned. */
+  limit?: number
+  /** Starting index into the result set. */
+  offset?: number
+}
+
+export interface HttpConfig {
+  timeoutSecs?: number
+  poolMaxIdlePerHost?: number
+  /**
+   * Custom HTTP headers added to every outbound request.
+   *
+   * **These headers OVERRIDE any SDK-managed header with the same name**,
+   * including `User-Agent`, `x-api-key`, `Accept`, and `Content-Type`.
+   * Header names are matched case-insensitively. Use this to override the
+   * auto-generated User-Agent or inject correlation IDs, proxy auth, etc.
+   */
+  headers?: Record<string, string>
+}
+
+/** Template arguments for a Hyperliquid wallet-events filter. */
+export interface HyperliquidWalletEventsFilterTemplate {
+  /** Hyperliquid wallet addresses to match against. */
+  wallets: Array<string>
+}
+
 /** Parameters for `invite_team_member`. */
 export interface InviteTeamMemberRequest {
   /** Email address to invite. */
@@ -973,6 +964,7 @@ export interface InviteTeamMemberRequest {
   /** Team role (`admin`, `viewer`, or `billing`); required for new users. */
   role?: string
 }
+
 /** Response from `invite_team_member`. */
 export interface InviteTeamMemberResponse {
   /** The invited user and their invitation status. */
@@ -980,81 +972,205 @@ export interface InviteTeamMemberResponse {
   /** Error message when the request did not succeed. */
   error?: string
 }
-/** Parameters for `remove_team_member`. */
-export interface RemoveTeamMemberRequest {
-  /** When true, also delete the user entirely rather than just removing them from the team. */
-  destroyUser?: boolean
+
+/** An invoice issued to the account. */
+export interface Invoice {
+  /** Unique invoice identifier. */
+  id: string
+  /** Payment status (e.g. `paid`, `open`). */
+  status: string
+  /** Reason the invoice was generated (e.g. `subscription_cycle`). */
+  billingReason: string
+  /** Line items contributing to the invoice total. */
+  lines: Array<InvoiceLine>
+  /** Amount due in the smallest currency unit. */
+  amountDue: number
+  /** Amount already paid in the smallest currency unit. */
+  amountPaid: number
+  /** Start of the billing period (Unix timestamp). */
+  periodStart: number
+  /** End of the billing period (Unix timestamp). */
+  periodEnd: number
+  /** Timestamp when the invoice was created (Unix timestamp). */
+  created: number
+  /** Subtotal before taxes and adjustments. */
+  subtotal: number
 }
-/** Shared message-shaped data wrapper for team operations. */
-export interface TeamMessageData {
-  /** Human-readable confirmation message. */
-  message?: string
+
+/** A single line item on an invoice. */
+export interface InvoiceLine {
+  /** Human-readable description of the line item. */
+  description: string
+  /** Line item amount in the smallest currency unit. */
+  amount: number
 }
-/** Response from `remove_team_member`. */
-export interface RemoveTeamMemberResponse {
-  /** Operation result message. */
-  data?: TeamMessageData
+
+/** Data wrapper for the IP custom header configuration. */
+export interface IpCustomHeaderData {
+  /** Configured header name. */
+  headerName: string
+}
+
+/** Configuration for delivering stream batches to a Kafka topic. */
+export interface KafkaAttributes {
+  /** Comma-separated list of Kafka broker addresses (host:port). */
+  bootstrapServers: string
+  /** Destination topic. */
+  topicName: string
+  /** Compression codec applied to produced messages (e.g. `none`, `gzip`). */
+  compressionType: string
+  /** Maximum number of messages grouped per produce request. */
+  batchSize: number
+  /** Milliseconds the producer waits to batch additional messages. */
+  lingerMs: number
+  /** Maximum size in bytes of a single Kafka message (`max_message_bytes`). */
+  maxMessageBytes: number
+  /** Request timeout in seconds. */
+  timeoutSec: number
+  /** Maximum number of retry attempts for a failed produce. */
+  maxRetry: number
+  /** Seconds to wait between retry attempts. */
+  retryIntervalSec: number
+  /** Optional SASL username. */
+  username?: string
+  /** Optional SASL password. */
+  password?: string
+  /** Optional security protocol (e.g. `SASL_SSL`). */
+  protocol?: string
+  /** Optional SASL mechanism (e.g. `PLAIN`, `SCRAM-SHA-256`). */
+  mechanisms?: string
+}
+
+/** A single key/value entry returned by `get_sets`. */
+export interface KvSetEntry {
+  /** Key identifying the set. */
+  key: string
+  /** Stored string value. */
+  value: string
+}
+
+export interface KvStoreConfig {
+  baseUrl?: string
+}
+
+/** Response from `list_chains`. */
+export interface ListChainsResponse {
+  /** Supported chains and their networks. */
+  data: Array<Chain>
   /** Error message when the request did not succeed. */
   error?: string
 }
-/** Response from `resend_team_invite`. */
-export interface ResendTeamInviteResponse {
-  /** Operation result message. */
-  data?: TeamMessageData
+
+/** Response from `list_contains_item`. */
+export interface ListContainsItemResponse {
+  /** `true` when the item is present in the list. */
+  exists: boolean
+}
+
+/** Invoice list wrapper. */
+export interface ListInvoicesData {
+  /** Invoices on the account. */
+  invoices: Array<Invoice>
+}
+
+/** Response from `list_invoices`. */
+export interface ListInvoicesResponse {
+  /** Invoice data payload. */
+  data?: ListInvoicesData
   /** Error message when the request did not succeed. */
   error?: string
 }
-/**
- * Parameters for the account usage methods (`get_usage`, `get_usage_by_*`).
- * Both bounds are optional; omit for account-to-date totals.
- */
-export interface GetUsageRequest {
-  /** Start of the query window (Unix timestamp). */
-  startTime?: number
-  /** End of the query window (Unix timestamp). */
-  endTime?: number
-}
-/** Aggregate account usage for a time window. */
-export interface UsageData {
-  /** Credits consumed during the window. */
-  creditsUsed: number
-  /** Credits still available, when the plan has a finite limit. */
-  creditsRemaining?: number
-  /** Plan's credit limit, when applicable. */
-  limit?: number
-  /** Credits consumed beyond the plan limit. */
-  overages?: number
-  /** Start of the queried window. */
-  startTime: number
-  /** End of the queried window. */
-  endTime: number
+
+/** Payment list wrapper. */
+export interface ListPaymentsData {
+  /** Payments on the account. */
+  payments: Array<Payment>
 }
-/** Response from `get_usage`. */
-export interface GetUsageResponse {
-  /** Aggregate usage payload. */
-  data?: UsageData
+
+/** Response from `list_payments`. */
+export interface ListPaymentsResponse {
+  /** Payment data payload. */
+  data?: ListPaymentsData
   /** Error message when the request did not succeed. */
   error?: string
 }
-/** Per-endpoint usage row. */
-export interface EndpointUsage {
-  /** Endpoint subdomain. */
-  name: string
-  /** Blockchain the endpoint serves. */
-  chain?: string
-  /** Network within the chain. */
-  network?: string
-  /** Operational status during the window. */
-  status?: string
-  /** Total credits consumed by this endpoint. */
-  creditsUsed: number
-  /** Human-readable label. */
-  label?: string
-  /** Per-method credit breakdown. */
-  methodsBreakdown: Array<MethodUsage>
-  /** Request count during the window. */
-  requests?: number
+
+/** Parameters for `list_streams`. */
+export interface ListStreamsParams {
+  /** Filter results by stream type. */
+  streamType?: string
+  /** Starting index into the result set; defaults to 0. */
+  offset?: number
+  /** Maximum number of streams returned. */
+  limit?: number
+  /** Field to sort results by. */
+  orderBy?: string
+  /** Sort direction (`asc` or `desc`). */
+  orderDirection?: string
+}
+
+/** Inner data wrapper for `list_tags`. */
+export interface ListTagsData {
+  /** Tags on the account. */
+  tags: Array<AccountTag>
+}
+
+/** Response from `list_tags`. */
+export interface ListTagsResponse {
+  /** Account tags payload. */
+  data?: ListTagsData
+  /** Error message when the request did not succeed. */
+  error?: string
+}
+
+/** Response from `list_team_endpoints`. */
+export interface ListTeamEndpointsResponse {
+  /** Endpoints accessible to the team. */
+  data: Array<TeamEndpoint>
+  /** Error message when the request did not succeed. */
+  error?: string
+}
+
+/** Response from `list_teams`. */
+export interface ListTeamsResponse {
+  /** Teams on the account. */
+  data: Array<TeamSummary>
+  /** Error message when the request did not succeed. */
+  error?: string
+}
+
+/** Response from `list_webhooks`. */
+export interface ListWebhooksResponse {
+  /** Webhooks on the current page. */
+  data: Array<Webhook>
+  /** Pagination metadata for the response. */
+  pageInfo: WebhookPageInfo
+}
+
+/** Raw request/response payloads attached to a log entry. */
+export interface LogDetails {
+  /** JSON-encoded request body (truncated at 2KB). */
+  request?: string
+  /** JSON-encoded response body (truncated at 2KB). */
+  response?: string
+}
+
+/** A per-method rate limiter configured on an endpoint. */
+export interface MethodRateLimiter {
+  /** Rate limiter identifier. */
+  id: string
+  /** Interval over which the rate applies (e.g. `second`, `minute`). */
+  interval: string
+  /** RPC methods the limiter applies to. */
+  methods: Array<string>
+  /** Maximum number of calls allowed per interval. */
+  rate: number
+  /** Whether the limiter is `enabled` or `disabled`. */
+  status: string
+  /** Creation timestamp. */
+  created: string
 }
+
 /** Per-method usage row. */
 export interface MethodUsage {
   /** RPC method name. */
@@ -1068,222 +1184,259 @@ export interface MethodUsage {
   /** Chain the calls targeted. */
   chain?: string
 }
-/** Per-chain usage row. */
-export interface ChainUsage {
-  /** Chain name or slug. */
-  name: string
-  /** Credits consumed on the chain. */
-  creditsUsed: number
-}
-/** Inner data for `get_usage_by_endpoint`. */
-export interface UsageByEndpointData {
-  /** Per-endpoint rows. */
-  endpoints: Array<EndpointUsage>
-  /** Start of the queried window. */
-  startTime?: number
-  /** End of the queried window. */
-  endTime?: number
+
+/** Pagination metadata returned alongside a paginated result set. */
+export interface PageInfo {
+  /** Page size used for this response. */
+  limit: number
+  /** Starting index of this page within the full result set. */
+  offset: number
+  /** Total number of items matching the query across all pages. */
+  total: number
 }
-/** Response from `get_usage_by_endpoint`. */
-export interface GetUsageByEndpointResponse {
-  /** Per-endpoint usage payload. */
-  data?: UsageByEndpointData
-  /** Error message when the request did not succeed. */
-  error?: string
+
+/** Pagination metadata for admin list responses. */
+export interface Pagination {
+  /** Total number of items matching the query across all pages. */
+  total: number
+  /** Page size used for this response. */
+  limit: number
+  /** Starting index of this page within the full result set. */
+  offset: number
 }
-/** Inner data for `get_usage_by_method`. */
-export interface UsageByMethodData {
-  /** Per-method rows. */
-  methods: Array<MethodUsage>
-  /** Start of the queried window. */
-  startTime?: number
-  /** End of the queried window. */
-  endTime?: number
+
+/** A payment recorded on the account. */
+export interface Payment {
+  /** Payment amount as a string in the account's currency. */
+  amount: string
+  /** Last four digits of the card used for the payment. */
+  cardLast4?: string
+  /** Timestamp when the payment was recorded. */
+  createdAt: string
+  /** Currency code (e.g. `usd`). */
+  currency: string
+  /** Payment status. */
+  status: string
+  /** Portion of the payment attributed to marketplace spending. */
+  marketplaceAmount?: string
 }
-/** Response from `get_usage_by_method`. */
-export interface GetUsageByMethodResponse {
-  /** Per-method usage payload. */
-  data?: UsageByMethodData
-  /** Error message when the request did not succeed. */
-  error?: string
+
+/** Configuration for delivering stream batches to a PostgreSQL database. */
+export interface PostgresAttributes {
+  /** Database host. */
+  host: string
+  /** Database port. */
+  port: number
+  /** Database name. */
+  database: string
+  /** Username used to authenticate. */
+  username: string
+  /** Password used to authenticate. */
+  password: string
+  /** Destination table for inserted rows. */
+  tableName: string
+  /** Postgres SSL mode. The Quicknode API accepts only `disable` or `require`. */
+  sslmode: string
+  /** Maximum number of retry attempts for a failed write. */
+  maxRetry: number
+  /** Seconds to wait between retry attempts. */
+  retryIntervalSec: number
 }
-/** Inner data for `get_usage_by_chain`. */
-export interface UsageByChainData {
-  /** Per-chain rows. */
-  chains: Array<ChainUsage>
-  /** Start of the queried window. */
-  startTime?: number
-  /** End of the queried window. */
-  endTime?: number
+
+/** Billing product type the stream is associated with. */
+export declare const enum ProductType {
+  Stream = 'Stream',
+  Webhook = 'Webhook'
 }
-/** Response from `get_usage_by_chain`. */
-export interface GetUsageByChainResponse {
-  /** Per-chain usage payload. */
-  data?: UsageByChainData
-  /** Error message when the request did not succeed. */
-  error?: string
+
+/**
+ * A single rate-limit row returned by `get_rate_limits`, identifying the
+ * bucket (`rps`/`rpm`/`rpd`), the value enforced, and whether the value comes
+ * from the plan default or a user-set override.
+ */
+export interface RateLimitEntry {
+  /** Which bucket this row applies to: `rps`, `rpm`, or `rpd`. */
+  bucket: string
+  /** The enforced value for this bucket. */
+  rateLimit: number
+  /** Where the value comes from: `plan_default` or `user_override`. */
+  source: string
+  /**
+   * Row identifier. Present on `user_override` rows — pass it to
+   * `delete_rate_limit_override` to remove the override. May be absent on
+   * `plan_default` rows and cannot be deleted there.
+   */
+  id?: string
 }
-/** Per-tag usage row. */
-export interface TagUsage {
-  /** Tag identifier. */
-  tagId?: number
-  /** Tag label. */
-  label: string
-  /** Credits consumed by endpoints with this tag. */
-  creditsUsed: number
-  /** Request count during the window. */
-  requests: number
+
+/** Endpoint-wide rate limit settings. */
+export interface RateLimitSettings {
+  /** Requests per second. */
+  rps?: number
+  /** Requests per minute. */
+  rpm?: number
+  /** Requests per day. */
+  rpd?: number
 }
-/** Inner data for `get_usage_by_tag`. */
-export interface UsageByTagData {
-  /** Per-tag rows. */
-  tags: Array<TagUsage>
-  /** Start of the queried window. */
-  startTime?: number
-  /** End of the queried window. */
-  endTime?: number
+
+/** Parameters for `remove_team_member`. */
+export interface RemoveTeamMemberRequest {
+  /** When true, also delete the user entirely rather than just removing them from the team. */
+  destroyUser?: boolean
 }
-/** Response from `get_usage_by_tag`. */
-export interface GetUsageByTagResponse {
-  /** Per-tag usage payload. */
-  data?: UsageByTagData
+
+/** Response from `remove_team_member`. */
+export interface RemoveTeamMemberResponse {
+  /** Operation result message. */
+  data?: TeamMessageData
   /** Error message when the request did not succeed. */
   error?: string
 }
-export interface HttpConfig {
-  timeoutSecs?: number
-  poolMaxIdlePerHost?: number
-}
-export interface AdminConfig {
-  baseUrl?: string
-}
-export interface StreamsConfig {
-  baseUrl?: string
-}
-export interface WebhooksConfig {
-  baseUrl?: string
-}
-export interface KvStoreConfig {
-  baseUrl?: string
-}
-export interface SdkFullConfig {
-  apiKey: string
-  http?: HttpConfig
-  admin?: AdminConfig
-  streams?: StreamsConfig
-  webhooks?: WebhooksConfig
-  kvstore?: KvStoreConfig
-}
-/** Parameters for `create_set`. */
-export interface CreateSetParams {
-  /** Unique key identifying the set. */
-  key: string
-  /** String value stored under the key. */
-  value: string
-}
-/** Parameters for `get_sets`. */
-export interface GetSetsParams {
-  /** Maximum number of entries returned. */
-  limit?: number
-  /** Cursor returned by a previous page; pass to fetch the next page. */
-  cursor?: string
-}
-/** Parameters for `bulk_sets`. Either or both fields may be supplied. */
-export interface BulkSetsParams {
-  /** Key/value pairs to add. */
-  addSets?: Record<string, string>
-  /** Keys to delete. */
-  deleteSets?: Array<string>
-}
-/** Parameters for `create_list`. */
-export interface CreateListParams {
-  /** Unique key identifying the list. */
-  key: string
-  /** Initial items inserted into the list. */
-  items: Array<string>
-}
-/** Parameters for `get_lists`. */
-export interface GetListsParams {
-  /** Maximum number of list keys returned. */
-  limit?: number
-  /** Cursor returned by a previous page; pass to fetch the next page. */
-  cursor?: string
-}
-/** Parameters for `get_list`. */
-export interface GetListParams {
-  /** Maximum number of items returned. */
-  limit?: number
-  /** Cursor returned by a previous page; pass to fetch the next page. */
-  cursor?: string
-}
-/** Parameters for `update_list`. Either or both fields may be supplied. */
-export interface UpdateListParams {
-  /** Items to add to the list. */
-  addItems?: Array<string>
-  /** Items to remove from the list. */
-  removeItems?: Array<string>
-}
-/** Parameters for `add_list_item`. */
-export interface AddListItemParams {
-  /** Item to append to the list. */
-  item: string
+
+/** Parameters for `rename_tag`. */
+export interface RenameTagRequest {
+  /** New label for the tag. */
+  label: string
 }
-/** A single key/value entry returned by `get_sets`. */
-export interface KvSetEntry {
-  /** Key identifying the set. */
-  key: string
-  /** Stored string value. */
-  value: string
+
+/** Response from `rename_tag`. */
+export interface RenameTagResponse {
+  /** The renamed tag. */
+  data?: AccountTag
+  /** Error message when the request did not succeed. */
+  error?: string
 }
-/** Response from `get_sets`. */
-export interface GetSetsResponse {
-  /** Key/value entries on the current page. */
-  data: Array<KvSetEntry>
-  /** Cursor for the next page; empty string when there are no more pages. */
-  cursor: string
+
+/** Response from `resend_team_invite`. */
+export interface ResendTeamInviteResponse {
+  /** Operation result message. */
+  data?: TeamMessageData
+  /** Error message when the request did not succeed. */
+  error?: string
 }
-/** Response from `get_set`. */
-export interface GetSetResponse {
-  /** Stored string value. */
-  value: string
+
+/** Configuration for delivering stream batches to an S3-compatible object store. */
+export interface S3Attributes {
+  /** S3 service endpoint (e.g. `s3.amazonaws.com`). */
+  endpoint: string
+  /** Access key used to authenticate with the S3 endpoint. */
+  accessKey: string
+  /** Secret key used to authenticate with the S3 endpoint. */
+  secretKey: string
+  /** Target bucket name. */
+  bucket: string
+  /** Key prefix prepended to each written object. */
+  objectPrefix: string
+  /** Compression applied to written objects (e.g. `none`, `gzip`). */
+  compression: string
+  /** File format/extension for written objects (e.g. `.json`). */
+  fileType: string
+  /** Maximum number of retry attempts for a failed write. */
+  maxRetry: number
+  /** Seconds to wait between retry attempts. */
+  retryIntervalSec: number
+  /** Whether to use TLS when connecting to the endpoint. */
+  useSsl?: boolean
 }
-/** Inner data for `get_lists` responses. */
-export interface GetListsData {
-  /** List keys on the current page. */
-  keys: Array<string>
+
+export interface SdkFullConfig {
+  apiKey: string
+  http?: HttpConfig
+  admin?: AdminConfig
+  streams?: StreamsConfig
+  webhooks?: WebhooksConfig
+  kvstore?: KvStoreConfig
 }
-/** Response from `get_lists`. */
-export interface GetListsResponse {
-  /** List keys on the current page. */
-  data: GetListsData
-  /** Cursor for the next page; empty string when there are no more pages. */
-  cursor: string
+
+/** A single security feature's name, status, and optional value. */
+export interface SecurityOption {
+  /** Name of the security feature (e.g. `tokens`, `jwts`, `ips`). */
+  option: string
+  /** Whether the feature is `enabled` or `disabled`. */
+  status: string
+  /** Optional configuration value associated with the feature. */
+  value?: string
 }
-/** Inner data for `get_list` responses. */
-export interface GetListData {
-  /** Items in the list on the current page. */
-  items: Array<string>
+
+/**
+ * Per-feature toggles for `update_security_options`. Each field accepts
+ * `enabled` or `disabled`.
+ */
+export interface SecurityOptionsUpdate {
+  /** Token authentication toggle. */
+  tokens?: string
+  /** Referrer validation toggle. */
+  referrers?: string
+  /** JWT validation toggle. */
+  jwts?: string
+  /** IP whitelist toggle. */
+  ips?: string
+  /** Domain masking toggle. */
+  domainMasks?: string
+  /** HSTS (HTTP Strict Transport Security) toggle. */
+  hsts?: string
+  /** CORS toggle. */
+  cors?: string
+  /** Request (method) filter toggle. */
+  requestFilters?: string
+  /** Custom IP header toggle. */
+  ipCustomHeader?: string
 }
-/** Response from `get_list`. */
-export interface GetListResponse {
-  /** Items for the list on the current page. */
-  data: GetListData
-  /** Cursor for the next page; empty string when there are no more pages. */
-  cursor: string
+
+/** Response from `show_endpoint`. */
+export interface ShowEndpointResponse {
+  /** The endpoint, when found. */
+  data?: SingleEndpoint
+  /** Error message when the request did not succeed. */
+  error?: string
 }
-/** Response from `list_contains_item`. */
-export interface ListContainsItemResponse {
-  /** `true` when the item is present in the list. */
-  exists: boolean
+
+/** Full representation of a single endpoint, including its security and rate limits. */
+export interface SingleEndpoint {
+  /** Unique endpoint identifier. */
+  id: string
+  /** Human-readable label. */
+  label?: string
+  /** Current operational status. */
+  status?: string
+  /** Blockchain the endpoint serves. */
+  chain: string
+  /** Specific network within the chain. */
+  network: string
+  /** HTTP RPC URL. */
+  httpUrl: string
+  /** WebSocket RPC URL, when available. */
+  wssUrl?: string
+  /** Endpoint security configuration. */
+  security?: EndpointSecurity
+  /** Endpoint rate limits. */
+  rateLimits?: EndpointRateLimits
+  /** Tags applied to the endpoint. */
+  tags: Array<EndpointTag>
+  /** Whether the endpoint is configured to serve multiple chains/networks. */
+  isMultichain: boolean
 }
-/** Geographic region where a stream runs. */
-export const enum StreamRegion {
-  UsaEast = 'UsaEast',
-  EuropeCentral = 'EuropeCentral',
-  AsiaEast = 'AsiaEast'
+
+/**
+ * Template arguments for a Solana wallet filter: matches activity for a list
+ * of Solana account addresses.
+ */
+export interface SolanaWalletFilterTemplate {
+  /** Solana account addresses to match against. */
+  accounts: Array<string>
+}
+
+/**
+ * Template arguments for a Stellar wallet-transactions filter, matching
+ * transactions where the given wallets are the source account.
+ */
+export interface StellarWalletTransactionsFilterTemplate {
+  /** Stellar wallet addresses to match against. */
+  wallets: Array<string>
 }
+
 /** Type of on-chain data a stream delivers (blocks, transactions, logs, etc.). */
-export const enum StreamDataset {
+export declare const enum StreamDataset {
   Block = 'Block',
   BlockWithReceipts = 'BlockWithReceipts',
   Transactions = 'Transactions',
@@ -1303,180 +1456,121 @@ export const enum StreamDataset {
   Twap = 'Twap',
   WriterActions = 'WriterActions'
 }
+
 /** Destination kind a stream delivers to (webhook, S3, Postgres, etc.). */
-export const enum StreamDestination {
+export declare const enum StreamDestination {
   Webhook = 'Webhook',
   S3 = 'S3',
   Azure = 'Azure',
   Postgres = 'Postgres',
   Kafka = 'Kafka'
 }
-/** Language a stream's filter function is written in. */
-export const enum FilterLanguage {
-  Javascript = 'Javascript',
-  Go = 'Go',
-  Wasm = 'Wasm'
-}
+
 /** Where stream metadata is included in delivered payloads. */
-export const enum StreamMetadataLocation {
+export declare const enum StreamMetadataLocation {
   Body = 'Body',
   Header = 'Header',
   None = 'None'
 }
-/** Billing product type the stream is associated with. */
-export const enum ProductType {
-  Stream = 'Stream',
-  Webhook = 'Webhook'
+
+/** Geographic region where a stream runs. */
+export declare const enum StreamRegion {
+  UsaEast = 'UsaEast',
+  EuropeCentral = 'EuropeCentral',
+  AsiaEast = 'AsiaEast'
+}
+
+export interface StreamsConfig {
+  baseUrl?: string
 }
+
 /** Operational state of a stream. */
-export const enum StreamStatus {
+export declare const enum StreamStatus {
   Active = 'Active',
   Paused = 'Paused',
   Terminated = 'Terminated',
   Completed = 'Completed',
   Blocked = 'Blocked'
 }
-/** Configuration for delivering stream batches to an HTTP webhook endpoint. */
-export interface WebhookAttributes {
-  /** Destination URL that receives batched stream payloads. */
-  url: string
-  /** Maximum number of retry attempts for a failed delivery. Must be in the range 1–10. */
-  maxRetry: number
-  /** Seconds to wait between retry attempts. */
-  retryIntervalSec: number
-  /** Timeout in seconds for each POST request. */
-  postTimeoutSec: number
-  /** Optional token included with each request so the receiver can verify authenticity. When supplied, must be at least 32 bytes (256 bits). */
-  securityToken?: string
-  /** Compression applied to the payload (e.g. `none`, `gzip`). When omitted the server defaults to no compression. */
-  compression?: string
-}
-/** Configuration for delivering stream batches to an S3-compatible object store. */
-export interface S3Attributes {
-  /** S3 service endpoint (e.g. `s3.amazonaws.com`). */
-  endpoint: string
-  /** Access key used to authenticate with the S3 endpoint. */
-  accessKey: string
-  /** Secret key used to authenticate with the S3 endpoint. */
-  secretKey: string
-  /** Target bucket name. */
-  bucket: string
-  /** Key prefix prepended to each written object. */
-  objectPrefix: string
-  /** Compression applied to written objects (e.g. `none`, `gzip`). */
-  compression: string
-  /** File format/extension for written objects (e.g. `.json`). */
-  fileType: string
-  /** Maximum number of retry attempts for a failed write. */
-  maxRetry: number
-  /** Seconds to wait between retry attempts. */
-  retryIntervalSec: number
-  /** Whether to use TLS when connecting to the endpoint. */
-  useSsl?: boolean
-}
-/** Configuration for delivering stream batches to Azure Blob Storage. */
-export interface AzureAttributes {
-  /** Azure storage account name. */
-  storageAccount: string
-  /** SAS token used to authorize writes. */
-  sasToken: string
-  /** Container that receives written blobs. */
-  container: string
-  /** Compression applied to written blobs (e.g. `none`, `gzip`). */
-  compression: string
-  /** File format/extension for written blobs (e.g. `.json`). */
-  fileType: string
-  /** Maximum number of retry attempts for a failed write. */
-  maxRetry: number
-  /** Seconds to wait between retry attempts. */
-  retryIntervalSec: number
-  /** Optional name prefix prepended to each written blob. */
-  blobPrefix?: string
+
+/** Per-tag usage row. */
+export interface TagUsage {
+  /** Tag identifier. */
+  tagId?: number
+  /** Tag label. */
+  label: string
+  /** Credits consumed by endpoints with this tag. */
+  creditsUsed: number
+  /** Request count during the window. */
+  requests: number
 }
-/** Configuration for delivering stream batches to a PostgreSQL database. */
-export interface PostgresAttributes {
-  /** Database host. */
-  host: string
-  /** Database port. */
-  port: number
-  /** Database name. */
-  database: string
-  /** Username used to authenticate. */
-  username: string
-  /** Password used to authenticate. */
-  password: string
-  /** Destination table for inserted rows. */
-  tableName: string
-  /** Postgres SSL mode. The Quicknode API accepts only `disable` or `require`. */
-  sslmode: string
-  /** Maximum number of retry attempts for a failed write. */
-  maxRetry: number
-  /** Seconds to wait between retry attempts. */
-  retryIntervalSec: number
+
+/** Full team detail including pending invites. */
+export interface TeamDetail {
+  /** Team identifier. */
+  id: number
+  /** Team name. */
+  name: string
+  /** Default role assigned to newly invited members. */
+  defaultRole?: string
+  /** Current member count. */
+  membersCount?: number
+  /** Active team members. */
+  users: Array<TeamUser>
+  /** Invites that have not yet been accepted. */
+  pendingInvites: Array<TeamUser>
 }
-/** Configuration for delivering stream batches to a Kafka topic. */
-export interface KafkaAttributes {
-  /** Comma-separated list of Kafka broker addresses (host:port). */
-  bootstrapServers: string
-  /** Destination topic. */
-  topicName: string
-  /** Compression codec applied to produced messages (e.g. `none`, `gzip`). */
-  compressionType: string
-  /** Maximum number of messages grouped per produce request. */
-  batchSize: number
-  /** Milliseconds the producer waits to batch additional messages. */
-  lingerMs: number
-  /** Maximum size in bytes of a single Kafka message (`max_message_bytes`). */
-  maxMessageBytes: number
-  /** Request timeout in seconds. */
-  timeoutSec: number
-  /** Maximum number of retry attempts for a failed produce. */
-  maxRetry: number
-  /** Seconds to wait between retry attempts. */
-  retryIntervalSec: number
-  /** Optional SASL username. */
-  username?: string
-  /** Optional SASL password. */
-  password?: string
-  /** Optional security protocol (e.g. `SASL_SSL`). */
-  protocol?: string
-  /** Optional SASL mechanism (e.g. `PLAIN`, `SCRAM-SHA-256`). */
-  mechanisms?: string
+
+/** A team's endpoint association. */
+export interface TeamEndpoint {
+  /** Endpoint identifier. */
+  id: number
+  /** Endpoint subdomain. */
+  subdomain: string
+  /** Blockchain the endpoint serves. */
+  chain?: string
+  /** Network within the chain. */
+  network?: string
 }
-/**
- * Links a stream's filter to an address book so JSON paths resolve against its
- * managed address set.
- */
-export interface AddressBookConfig {
-  /** Identifier of the address book to use. */
-  addressBookId: string
-  /** Optional JSON path that resolves to an object whose fields are matched against the book. */
-  objectsFilterPath?: string
-  /** JSON paths whose resolved values are matched against the book's addresses. */
-  elementsFilterPaths: Array<string>
+
+/** Shared message-shaped data wrapper for team operations. */
+export interface TeamMessageData {
+  /** Human-readable confirmation message. */
+  message?: string
 }
-/** Pagination metadata returned alongside a paginated result set. */
-export interface PageInfo {
-  /** Page size used for this response. */
-  limit: number
-  /** Starting index of this page within the full result set. */
-  offset: number
-  /** Total number of items matching the query across all pages. */
-  total: number
+
+/** Summary representation of a team in list responses. */
+export interface TeamSummary {
+  /** Team identifier. */
+  id: number
+  /** Team name. */
+  name: string
+  /** Current member count. */
+  membersCount?: number
+  /** Active team members. */
+  users: Array<TeamUser>
 }
-/** Parameters for `list_streams`. */
-export interface ListStreamsParams {
-  /** Filter results by stream type. */
-  streamType?: string
-  /** Starting index into the result set; defaults to 0. */
-  offset?: number
-  /** Maximum number of streams returned. */
-  limit?: number
-  /** Field to sort results by. */
-  orderBy?: string
-  /** Sort direction (`asc` or `desc`). */
-  orderDirection?: string
+
+/** A team member or pending invitee. */
+export interface TeamUser {
+  /** User identifier. */
+  id: number
+  /** Display name. */
+  fullName?: string
+  /** Email address. */
+  email: string
+  /** Team role (e.g. `admin`, `viewer`, `billing`). */
+  role?: string
+  /** Membership status (e.g. `active`, `pending`). */
+  status?: string
+  /** When the user was added. */
+  createdAt?: string
+  /** Profile photo URL. */
+  photoUrl?: string
+  /** Whether this user is the primary user on the account. */
+  accountPrimaryUser?: boolean
 }
+
 /** Parameters for `test_filter`. */
 export interface TestFilterParams {
   /** Blockchain network to run the test against (e.g. `ethereum-mainnet`). */
@@ -1492,6 +1586,7 @@ export interface TestFilterParams {
   /** Address book linked to the filter, if any. */
   addressBookConfig?: AddressBookConfig
 }
+
 /** Result of a `test_filter` call. */
 export interface TestFilterResponse {
   /** Filter output as a JSON string. Shape depends on the dataset and the user's filter function. */
@@ -1499,104 +1594,99 @@ export interface TestFilterResponse {
   /** Log lines emitted by the filter function during evaluation. */
   logs: Array<string>
 }
-/** Result of `get_enabled_count`. */
-export interface EnabledCountResponse {
-  /** Total count of currently enabled streams. */
-  total: number
+
+/** Parameters for `update_endpoint`. */
+export interface UpdateEndpointRequest {
+  /** New human-readable label. */
+  label?: string
 }
-/** Identifier of a predefined webhook filter template. */
-export const enum WebhookTemplateId {
-  EvmWalletFilter = 'EvmWalletFilter',
-  EvmContractEvents = 'EvmContractEvents',
-  EvmAbiFilter = 'EvmAbiFilter',
-  SolanaWalletFilter = 'SolanaWalletFilter',
-  BitcoinWalletFilter = 'BitcoinWalletFilter',
-  XrplWalletFilter = 'XrplWalletFilter',
-  HyperliquidWalletEventsFilter = 'HyperliquidWalletEventsFilter',
-  StellarWalletTransactionsSourceAccountFilter = 'StellarWalletTransactionsSourceAccountFilter'
+
+/** Parameters for `update_endpoint_status`. */
+export interface UpdateEndpointStatusRequest {
+  /** New status (`active` or `paused`). */
+  status: string
 }
-/** Position a webhook begins (or resumes) delivering from when activated. */
-export const enum WebhookStartFrom {
-  /** Resume from the last-delivered block. */
-  Last = 'Last',
-  /** Start from the newest available block. */
-  Latest = 'Latest'
+
+/** Response from `update_endpoint_status`. */
+export interface UpdateEndpointStatusResponse {
+  /** Confirmation string returned by the API. */
+  data?: string
+  /** Error message when the request did not succeed. */
+  error?: string
 }
-/**
- * Template arguments for an EVM wallet filter: matches activity for a list of
- * wallet addresses.
- */
-export interface EvmWalletFilterTemplate {
-  /** Wallet addresses to match against. */
-  wallets: Array<string>
+
+/** Parameters for `update_list`. Either or both fields may be supplied. */
+export interface UpdateListParams {
+  /** Items to add to the list. */
+  addItems?: Array<string>
+  /** Items to remove from the list. */
+  removeItems?: Array<string>
 }
-/**
- * Template arguments for filtering EVM contract events, optionally scoped to
- * a specific set of event topic hashes.
- */
-export interface EvmContractEventsTemplate {
-  /** Contract addresses to watch for events. */
-  contracts: Array<string>
-  /** Optional list of event topic hashes to restrict the filter to specific events. */
-  eventHashes?: Array<string>
+
+/** Parameters for `update_method_rate_limit`. Only provided fields are changed. */
+export interface UpdateMethodRateLimitRequest {
+  /** New set of RPC methods the limiter applies to. */
+  methods?: Array<string>
+  /** New status (`enabled` or `disabled`). */
+  status?: string
+  /** New rate value. */
+  rate?: number
 }
-/**
- * Template arguments for an EVM ABI filter: decodes and filters events for a
- * set of contracts using a provided ABI.
- */
-export interface EvmAbiFilterTemplate {
-  /** JSON-encoded contract ABI used to decode event data. */
-  abi: string
-  /** Contract addresses to watch for events. */
-  contracts: Array<string>
+
+/** Response from `update_method_rate_limit`. */
+export interface UpdateMethodRateLimitResponse {
+  /** The updated rate limiter. */
+  data?: MethodRateLimiter
+  /** Error message when the request did not succeed. */
+  error?: string
 }
-/**
- * Template arguments for a Solana wallet filter: matches activity for a list
- * of Solana account addresses.
- */
-export interface SolanaWalletFilterTemplate {
-  /** Solana account addresses to match against. */
-  accounts: Array<string>
+
+/** Parameters for `update_rate_limits`. */
+export interface UpdateRateLimitsRequest {
+  /** Rate limit values to apply. */
+  rateLimits: RateLimitSettings
 }
-/** Template arguments for a Bitcoin wallet filter. */
-export interface BitcoinWalletFilterTemplate {
-  /** Bitcoin wallet addresses to match against. */
-  wallets: Array<string>
+
+/** Parameters for `update_request_filter`. */
+export interface UpdateRequestFilterRequest {
+  /** New set of whitelisted RPC methods. */
+  method?: Array<string>
 }
-/** Template arguments for an XRPL wallet filter. */
-export interface XrplWalletFilterTemplate {
-  /** XRPL wallet addresses to match against. */
-  wallets: Array<string>
+
+/** Parameters for `update_security_options`. */
+export interface UpdateSecurityOptionsRequest {
+  /** Security toggles to apply. */
+  options: SecurityOptionsUpdate
 }
-/** Template arguments for a Hyperliquid wallet-events filter. */
-export interface HyperliquidWalletEventsFilterTemplate {
-  /** Hyperliquid wallet addresses to match against. */
-  wallets: Array<string>
+
+/** Response from `update_security_options`. */
+export interface UpdateSecurityOptionsResponse {
+  /** Updated security options. */
+  data: Array<SecurityOption>
+  /** Error message when the request did not succeed. */
+  error?: string
 }
-/**
- * Template arguments for a Stellar wallet-transactions filter, matching
- * transactions where the given wallets are the source account.
- */
-export interface StellarWalletTransactionsFilterTemplate {
-  /** Stellar wallet addresses to match against. */
-  wallets: Array<string>
+
+/** Inner data for `update_team_endpoints` responses. */
+export interface UpdateTeamEndpointsData {
+  /** `true` when the association update succeeded. */
+  success?: boolean
 }
-/** Destination configuration for a webhook. */
-export interface WebhookDestinationAttributes {
-  /** Target URL that receives webhook payloads. */
-  url: string
-  /** Optional token sent with each payload so the receiver can verify authenticity; generated automatically when omitted. */
-  securityToken?: string
-  /** Optional payload compression (`gzip` or `none`). */
-  compression?: string
+
+/** Parameters for `update_team_endpoints`. */
+export interface UpdateTeamEndpointsRequest {
+  /** Endpoint ids to associate with the team; pass an empty array to remove all. */
+  endpointIds: Array<string>
 }
-/** Parameters for `list_webhooks`. */
-export interface GetWebhooksParams {
-  /** Maximum number of webhooks returned. */
-  limit?: number
-  /** Starting index into the result set. */
-  offset?: number
+
+/** Response from `update_team_endpoints`. */
+export interface UpdateTeamEndpointsResponse {
+  /** Update result. */
+  data?: UpdateTeamEndpointsData
+  /** Error message when the request did not succeed. */
+  error?: string
 }
+
 /**
  * Parameters for `update_webhook`. All fields are optional; only set fields
  * are modified.
@@ -1609,11 +1699,63 @@ export interface UpdateWebhookParams {
   /** New destination configuration. */
   destinationAttributes?: WebhookDestinationAttributes
 }
-/** Parameters for `activate_webhook`. */
-export interface ActivateWebhookParams {
-  /** Position to begin (or resume) delivery from. */
-  startFrom: WebhookStartFrom
+
+/** Inner data for `get_usage_by_chain`. */
+export interface UsageByChainData {
+  /** Per-chain rows. */
+  chains: Array<ChainUsage>
+  /** Start of the queried window. */
+  startTime?: number
+  /** End of the queried window. */
+  endTime?: number
+}
+
+/** Inner data for `get_usage_by_endpoint`. */
+export interface UsageByEndpointData {
+  /** Per-endpoint rows. */
+  endpoints: Array<EndpointUsage>
+  /** Start of the queried window. */
+  startTime?: number
+  /** End of the queried window. */
+  endTime?: number
+}
+
+/** Inner data for `get_usage_by_method`. */
+export interface UsageByMethodData {
+  /** Per-method rows. */
+  methods: Array<MethodUsage>
+  /** Start of the queried window. */
+  startTime?: number
+  /** End of the queried window. */
+  endTime?: number
+}
+
+/** Inner data for `get_usage_by_tag`. */
+export interface UsageByTagData {
+  /** Per-tag rows. */
+  tags: Array<TagUsage>
+  /** Start of the queried window. */
+  startTime?: number
+  /** End of the queried window. */
+  endTime?: number
 }
+
+/** Aggregate account usage for a time window. */
+export interface UsageData {
+  /** Credits consumed during the window. */
+  creditsUsed: number
+  /** Credits still available, when the plan has a finite limit. */
+  creditsRemaining?: number
+  /** Plan's credit limit, when applicable. */
+  limit?: number
+  /** Credits consumed beyond the plan limit. */
+  overages?: number
+  /** Start of the queried window. */
+  startTime: number
+  /** End of the queried window. */
+  endTime: number
+}
+
 /** A webhook's full configuration and current state. */
 export interface Webhook {
   /** Unique webhook identifier. */
@@ -1635,6 +1777,39 @@ export interface Webhook {
   /** Destination-specific configuration as a JSON string. */
   destinationAttributes?: string
 }
+
+/** Configuration for delivering stream batches to an HTTP webhook endpoint. */
+export interface WebhookAttributes {
+  /** Destination URL that receives batched stream payloads. */
+  url: string
+  /** Maximum number of retry attempts for a failed delivery. Must be in the range 1–10. */
+  maxRetry: number
+  /** Seconds to wait between retry attempts. */
+  retryIntervalSec: number
+  /** Timeout in seconds for each POST request. */
+  postTimeoutSec: number
+  /** Optional token included with each request so the receiver can verify authenticity. When supplied, must be at least 32 bytes (256 bits). */
+  securityToken?: string
+  /** Compression applied to the payload (e.g. `none`, `gzip`). When omitted the server defaults to no compression. */
+  compression?: string
+}
+
+/** Destination configuration for a webhook. */
+export interface WebhookDestinationAttributes {
+  /** Target URL that receives webhook payloads. */
+  url: string
+  /** Optional token sent with each payload so the receiver can verify authenticity; generated automatically when omitted. */
+  securityToken?: string
+  /** Optional payload compression (`gzip` or `none`). */
+  compression?: string
+}
+
+/** Response from `get_enabled_count` for webhooks. */
+export interface WebhookEnabledCountResponse {
+  /** Total count of enabled webhooks on the account. */
+  total: number
+}
+
 /** Pagination metadata returned alongside a paginated webhooks list. */
 export interface WebhookPageInfo {
   /** Page size used for this response. */
@@ -1644,136 +1819,35 @@ export interface WebhookPageInfo {
   /** Total number of webhooks matching the query across all pages. */
   total: number
 }
-/** Response from `list_webhooks`. */
-export interface ListWebhooksResponse {
-  /** Webhooks on the current page. */
-  data: Array<Webhook>
-  /** Pagination metadata for the response. */
-  pageInfo: WebhookPageInfo
-}
-/** Response from `get_enabled_count` for webhooks. */
-export interface WebhookEnabledCountResponse {
-  /** Total count of enabled webhooks on the account. */
-  total: number
-}
-export interface CreateStreamParamsNode {
-  name: string
-  region: StreamRegion
-  network: string
-  dataset: StreamDataset
-  startRange: number
-  endRange: number
-  destinationAttributes: any
-  plan?: string
-  thresholdFetchBuffer?: number
-  datasetBatchSize: number
-  maxBatchSize?: number
-  maxBufferRangeSize?: number
-  maxBufferProcessingWorkers?: number
-  keepDistanceFromTip?: number
-  filterFunction?: string
-  filterLanguage?: FilterLanguage
-  addressBookConfig?: AddressBookConfig
-  includeStreamMetadata?: StreamMetadataLocation
-  productType?: ProductType
-  status?: StreamStatus
-  notificationEmail?: string
-  chargeMinCap?: number
-  fixBlockReorgs?: number
-  elasticBatchEnabled: boolean
-  extraDestinations?: Array<any>
-}
-export interface UpdateStreamParamsNode {
-  name?: string
-  region?: StreamRegion
-  network?: string
-  dataset?: StreamDataset
-  startRange?: number
-  endRange?: number
-  destinationAttributes?: any
-  plan?: string
-  thresholdFetchBuffer?: number
-  datasetBatchSize?: number
-  maxBatchSize?: number
-  maxBufferRangeSize?: number
-  maxBufferProcessingWorkers?: number
-  keepDistanceFromTip?: number
-  filterFunction?: string
-  filterLanguage?: FilterLanguage
-  addressBookConfig?: AddressBookConfig
-  includeStreamMetadata?: StreamMetadataLocation
-  notificationEmail?: string
-  chargeMinCap?: number
-  fixBlockReorgs?: number
-  elasticBatchEnabled?: boolean
-  status?: StreamStatus
-  memo?: string
-  extraDestinations?: Array<any>
-}
-export interface StreamNode {
-  id: string
-  name: string
-  status: string
-  createdAt: string
-  updatedAt: string
-  sequence: number
-  network: string
-  dataset: string
-  region: string
-  startRange: number
-  endRange: number
-  plan?: string
-  thresholdFetchBuffer?: number
-  datasetBatchSize?: number
-  maxBatchSize?: number
-  maxBufferRangeSize?: number
-  maxBufferProcessingWorkers?: number
-  keepDistanceFromTip?: number
-  filterFunction?: string
-  filterLanguage?: string
-  includeStreamMetadata?: string
-  productType?: string
-  notificationEmail?: string
-  fixBlockReorgs?: number
-  currentHash?: string
-  destinationAttributes?: any
-  elasticBatchEnabled?: boolean
-  qnAccountId?: string
-  chargeMinCap?: number
-  memo?: string
-  addressBookConfig?: AddressBookConfig
-  extraDestinations?: Array<any>
-}
-export interface ListStreamsResponseNode {
-  data: Array<StreamNode>
-  pageInfo: PageInfo
-}
-export interface CreateWebhookFromTemplateParamsNode {
-  name: string
-  network: string
-  notificationEmail?: string
-  destinationAttributes: WebhookDestinationAttributes
-  templateArgs: any
+
+export interface WebhooksConfig {
+  baseUrl?: string
 }
-export interface UpdateWebhookTemplateParamsNode {
-  name?: string
-  notificationEmail?: string
-  destinationAttributes?: WebhookDestinationAttributes
-  templateArgs: any
+
+/** Position a webhook begins (or resumes) delivering from when activated. */
+export declare const enum WebhookStartFrom {
+  /** Resume from the last-delivered block. */
+  Last = 'Last',
+  /** Start from the newest available block. */
+  Latest = 'Latest'
 }
-export declare class QuicknodeSdk {
-  /** Creates a new SDK instance from an explicit configuration. */
-  constructor(config: SdkFullConfig)
-  /** Returns the admin sub-client. */
-  get admin(): AdminApiClient
-  /** Returns the streams sub-client. */
-  get streams(): StreamsApiClient
-  /** Returns the webhooks sub-client. */
-  get webhooks(): WebhooksApiClient
-  /** Returns the kvstore sub-client. */
-  get kvstore(): KvStoreApiClient
-  /** Creates a new SDK instance using configuration from environment variables. */
-  static fromEnv(): QuicknodeSdk
+
+/** Identifier of a predefined webhook filter template. */
+export declare const enum WebhookTemplateId {
+  EvmWalletFilter = 'EvmWalletFilter',
+  EvmContractEvents = 'EvmContractEvents',
+  EvmAbiFilter = 'EvmAbiFilter',
+  SolanaWalletFilter = 'SolanaWalletFilter',
+  BitcoinWalletFilter = 'BitcoinWalletFilter',
+  XrplWalletFilter = 'XrplWalletFilter',
+  HyperliquidWalletEventsFilter = 'HyperliquidWalletEventsFilter',
+  StellarWalletTransactionsSourceAccountFilter = 'StellarWalletTransactionsSourceAccountFilter'
+}
+
+/** Template arguments for an XRPL wallet filter. */
+export interface XrplWalletFilterTemplate {
+  /** XRPL wallet addresses to match against. */
+  wallets: Array<string>
 }
 export declare class AdminApiClient {
   /**
@@ -2091,6 +2165,66 @@ export declare class AdminApiClient {
    */
   getEndpointSecurity(id: string): Promise<GetEndpointSecurityResponse>
 }
+
+export declare class KvStoreApiClient {
+  /** Creates a new set, storing a single string value under the given key. */
+  createSet(params: CreateSetParams): Promise<void>
+  /**
+   * Returns a paginated page of key/value entries from the store. Use the
+   * response `cursor` to fetch subsequent pages.
+   */
+  getSets(params?: GetSetsParams | undefined | null): Promise<GetSetsResponse>
+  /** Returns the string value stored for a single set by key. */
+  getSet(key: string): Promise<GetSetResponse>
+  /**
+   * Adds and removes multiple sets in a single request. Either `add_sets`,
+   * `delete_sets`, or both may be supplied.
+   */
+  bulkSets(params: BulkSetsParams): Promise<void>
+  /** Removes a single set by key. */
+  deleteSet(key: string): Promise<void>
+  /** Creates a new list under the given key, seeded with the provided items. */
+  createList(params: CreateListParams): Promise<void>
+  /**
+   * Returns a paginated page of list keys from the store. Use the response
+   * `cursor` to fetch subsequent pages.
+   */
+  getLists(params?: GetListsParams | undefined | null): Promise<GetListsResponse>
+  /**
+   * Returns a paginated page of items from the list identified by `key`.
+   * Use the response `cursor` to fetch subsequent pages.
+   */
+  getList(key: string, params?: GetListParams | undefined | null): Promise<GetListResponse>
+  /**
+   * Updates an existing list by adding and/or removing items in a single
+   * operation. Either `add_items`, `remove_items`, or both may be supplied.
+   */
+  updateList(key: string, params: UpdateListParams): Promise<void>
+  /** Appends a single item to the list identified by `key`. */
+  addListItem(key: string, params: AddListItemParams): Promise<void>
+  /** Checks whether the specified list contains the given item. */
+  listContainsItem(key: string, item: string): Promise<ListContainsItemResponse>
+  /** Removes a specific item from the list identified by `key`. */
+  deleteListItem(key: string, item: string): Promise<void>
+  /** Removes a list and all of its items by key. */
+  deleteList(key: string): Promise<void>
+}
+
+export declare class QuicknodeSdk {
+  /** Creates a new SDK instance from an explicit configuration. */
+  constructor(config: SdkFullConfig)
+  /** Returns the admin sub-client. */
+  get admin(): AdminApiClient
+  /** Returns the streams sub-client. */
+  get streams(): StreamsApiClient
+  /** Returns the webhooks sub-client. */
+  get webhooks(): WebhooksApiClient
+  /** Returns the kvstore sub-client. */
+  get kvstore(): KvStoreApiClient
+  /** Creates a new SDK instance using configuration from environment variables. */
+  static fromEnv(): QuicknodeSdk
+}
+
 export declare class StreamsApiClient {
   /**
    * Creates a new Stream on a given blockchain network and dataset, delivering
@@ -2146,6 +2280,7 @@ export declare class StreamsApiClient {
    */
   getEnabledCount(streamType?: string | undefined | null): Promise<EnabledCountResponse>
 }
+
 export declare class WebhooksApiClient {
   /**
    * Returns a paginated list of webhooks on the account. Each entry includes
@@ -2213,46 +2348,114 @@ export declare class WebhooksApiClient {
    */
   updateWebhookTemplate(webhookId: string, params: UpdateWebhookTemplateParamsNode): Promise<Webhook>
 }
-export declare class KvStoreApiClient {
-  /** Creates a new set, storing a single string value under the given key. */
-  createSet(params: CreateSetParams): Promise<void>
-  /**
-   * Returns a paginated page of key/value entries from the store. Use the
-   * response `cursor` to fetch subsequent pages.
-   */
-  getSets(params?: GetSetsParams | undefined | null): Promise<GetSetsResponse>
-  /** Returns the string value stored for a single set by key. */
-  getSet(key: string): Promise<GetSetResponse>
-  /**
-   * Adds and removes multiple sets in a single request. Either `add_sets`,
-   * `delete_sets`, or both may be supplied.
-   */
-  bulkSets(params: BulkSetsParams): Promise<void>
-  /** Removes a single set by key. */
-  deleteSet(key: string): Promise<void>
-  /** Creates a new list under the given key, seeded with the provided items. */
-  createList(params: CreateListParams): Promise<void>
-  /**
-   * Returns a paginated page of list keys from the store. Use the response
-   * `cursor` to fetch subsequent pages.
-   */
-  getLists(params?: GetListsParams | undefined | null): Promise<GetListsResponse>
-  /**
-   * Returns a paginated page of items from the list identified by `key`.
-   * Use the response `cursor` to fetch subsequent pages.
-   */
-  getList(key: string, params?: GetListParams | undefined | null): Promise<GetListResponse>
-  /**
-   * Updates an existing list by adding and/or removing items in a single
-   * operation. Either `add_items`, `remove_items`, or both may be supplied.
-   */
-  updateList(key: string, params: UpdateListParams): Promise<void>
-  /** Appends a single item to the list identified by `key`. */
-  addListItem(key: string, params: AddListItemParams): Promise<void>
-  /** Checks whether the specified list contains the given item. */
-  listContainsItem(key: string, item: string): Promise<ListContainsItemResponse>
-  /** Removes a specific item from the list identified by `key`. */
-  deleteListItem(key: string, item: string): Promise<void>
-  /** Removes a list and all of its items by key. */
-  deleteList(key: string): Promise<void>
+
+export interface CreateStreamParamsNode {
+  name: string
+  region: StreamRegion
+  network: string
+  dataset: StreamDataset
+  startRange: number
+  endRange: number
+  destinationAttributes: any
+  plan?: string
+  thresholdFetchBuffer?: number
+  datasetBatchSize: number
+  maxBatchSize?: number
+  maxBufferRangeSize?: number
+  maxBufferProcessingWorkers?: number
+  keepDistanceFromTip?: number
+  filterFunction?: string
+  filterLanguage?: FilterLanguage
+  addressBookConfig?: AddressBookConfig
+  includeStreamMetadata?: StreamMetadataLocation
+  productType?: ProductType
+  status?: StreamStatus
+  notificationEmail?: string
+  chargeMinCap?: number
+  fixBlockReorgs?: number
+  elasticBatchEnabled: boolean
+  extraDestinations?: Array<any>
+}
+
+export interface CreateWebhookFromTemplateParamsNode {
+  name: string
+  network: string
+  notificationEmail?: string
+  destinationAttributes: WebhookDestinationAttributes
+  templateArgs: any
+}
+
+export interface ListStreamsResponseNode {
+  data: Array<StreamNode>
+  pageInfo: PageInfo
+}
+
+export interface StreamNode {
+  id: string
+  name: string
+  status: string
+  createdAt: string
+  updatedAt: string
+  sequence: number
+  network: string
+  dataset: string
+  region: string
+  startRange: number
+  endRange: number
+  plan?: string
+  thresholdFetchBuffer?: number
+  datasetBatchSize?: number
+  maxBatchSize?: number
+  maxBufferRangeSize?: number
+  maxBufferProcessingWorkers?: number
+  keepDistanceFromTip?: number
+  filterFunction?: string
+  filterLanguage?: string
+  includeStreamMetadata?: string
+  productType?: string
+  notificationEmail?: string
+  fixBlockReorgs?: number
+  currentHash?: string
+  destinationAttributes?: any
+  elasticBatchEnabled?: boolean
+  qnAccountId?: string
+  chargeMinCap?: number
+  memo?: string
+  addressBookConfig?: AddressBookConfig
+  extraDestinations?: Array<any>
+}
+
+export interface UpdateStreamParamsNode {
+  name?: string
+  region?: StreamRegion
+  network?: string
+  dataset?: StreamDataset
+  startRange?: number
+  endRange?: number
+  destinationAttributes?: any
+  plan?: string
+  thresholdFetchBuffer?: number
+  datasetBatchSize?: number
+  maxBatchSize?: number
+  maxBufferRangeSize?: number
+  maxBufferProcessingWorkers?: number
+  keepDistanceFromTip?: number
+  filterFunction?: string
+  filterLanguage?: FilterLanguage
+  addressBookConfig?: AddressBookConfig
+  includeStreamMetadata?: StreamMetadataLocation
+  notificationEmail?: string
+  chargeMinCap?: number
+  fixBlockReorgs?: number
+  elasticBatchEnabled?: boolean
+  status?: StreamStatus
+  memo?: string
+  extraDestinations?: Array<any>
+}
+
+export interface UpdateWebhookTemplateParamsNode {
+  name?: string
+  notificationEmail?: string
+  destinationAttributes?: WebhookDestinationAttributes
+  templateArgs: any
 }