@qaguardian/playwright-score 1.0.0 → 2.0.0

package/CHANGELOG.md

@@ -0,0 +1,689 @@
+# Changelog
+
+All notable changes to this project are documented here. Any change that
+alters what a given suite scores is a new scoring-model version (see
+[METHODOLOGY.md](./METHODOLOGY.md)), not a quiet patch.
+
+## 2.0.0 — 2026-09-23
+
+**Scoring model v4 — `standard` scores change.** Owner direction: public
+scores should reflect quality, full stop, not be softened to avoid moving
+anyone's number ("I don't care who fails"). This supersedes the 1.1.0
+plan of shipping these same rules as report-only under `standard`; 1.1.0
+was never published. See METHODOLOGY.md's "Why v4" for the full
+reasoning and VALIDATION.md for the complete before/after table across
+all 50 corpus repos, including every pass→fail flip.
+
+Corpus expanded from 17 to 50 real public repos (see
+`scripts/validate-corpus.sh`) — every rule below was checked against real
+findings across all 50 before landing, not just the fixtures.
+
+### Scores changed
+`standard` scores are **not** unchanged in this release (that was 1.1.0's
+promise; it's void under v4). Against the last actually-published version
+(1.0.0, model v3, none of these rules): 20/50 corpus repos move. Net
+**+22** across the corpus, but that's almost entirely Flagsmith's `.pw.ts`
+discovery fix alone (+62, previously hard-failed at 0 — its 20-spec suite
+wasn't found at all). Excluding Flagsmith, the other 19 movers are **net
+−40** (mean −2.1/repo) — real, quality-driven drops. Biggest: tldraw −9,
+AFFiNE −5, activepieces −5, microsoft/vscode −4, sencho −2, cal.com −2,
+then thirteen repos at −1. **Three pass→fail flips** at the default
+threshold (80): `payloadcms/payload` (80→79), `microsoft/vscode`
+(81→77), `tldraw/tldraw` (81→72). Pass rate: 37/50 (74%) → 34/50 (68%).
+See VALIDATION.md for the full per-repo table and the "Known
+limitations" this release documents rather than papers over. Two
+acceptance bars now guard against these rules over-correcting: Playwright's
+own official examples must still score >= 90/A (see
+`tests/official-examples.test.ts`, vendored from microsoft/playwright),
+and a hand-written "gold" fixture must still reach exactly 100.
+
+### Added — four rules narrowing the QAG-196 gameability gap (scored under `standard`)
+Narrowing, not closing: each rule matches specific known patterns (see the
+respellings each one closed in this same release), not the general class
+of "code that fakes stability or coverage" — a determined author can
+likely still find an unmatched spelling. Real signal on real code, not a
+guarantee nothing slips through.
+- **`pwscore/no-timer-sleep`** (error) — flags a hard-coded sleep
+  disguised past `playwright/no-wait-for-timeout`: `await new
+  Promise((resolve) => setTimeout(resolve, ms))`, its `globalThis.
+  setTimeout` and wrapped-callback (`setTimeout(() => resolve(), ms)`)
+  respellings, and the unrelated but equally invisible `node:timers/
+  promises` sleep (`await setTimeout(ms)`).
+- **`pwscore/no-coordinate-click`** (**warning**, not error — see below)
+  — flags coordinate-based mouse interaction (`page.mouse.click/dblclick/
+  move/down/up(x, y)`, including a destructured `const { mouse } = page`
+  binding) in place of a locator. **Known false positive, mitigated, not
+  eliminated**: this is also the *correct* way to interact with
+  canvas-based apps (whiteboard/drawing-tool suites with no addressable
+  DOM element) — two infinite-canvas editors in the corpus (tldraw,
+  AFFiNE) account for 428/459 of this rule's hits. Demoted to a
+  warning-level (0.4, not 1.0) demerit rather than skipped for canvas
+  apps by heuristic, which would itself become a new gameability surface
+  — see METHODOLOGY.md's "Why v4" and VALIDATION.md's "Known
+  limitations".
+- **`pwscore/no-trivial-assertion`** (error) — flags an assertion whose
+  subject and matcher combination can only ever pass regardless of
+  anything the app under test does (`expect(true).toBe(true)`,
+  `expect([]).toEqual([])`, `` expect(`x`).toBe(`x`) ``, `expect(1 +
+  1).toBe(2)`). Always passes, satisfies `playwright/expect-expect`,
+  verifies nothing about the app. Never flags a deliberate force-fail
+  assertion that always *fails* (`expect(true).toBe(false)`,
+  `expect(true, msg).toBeFalsy()`).
+- **`pwscore/no-soft-assertion-only-test`** (warning) — flags a test
+  whose every assertion is `expect.soft(...)`, so a failed check never
+  fails the run. `expect.poll(...)` counts as a hard assertion (a failed
+  poll still throws). Soft assertions are a legitimate, deliberate choice
+  (gather every problem in one pass) in many suites, but a warning-level
+  (not error) demerit as the default now that it's scored, not report-
+  only.
+
+### Added — inline `eslint-disable` comments are now a finding, not invisible
+`pwscore/eslint-disable-comment` (warning) flags every ESLint suppression-
+directive comment (`eslint-disable`, `eslint-disable-line`,
+`eslint-disable-next-line`, block or line form) in a scored file — a real
+demerit, same as everything else in this release. **Known limitation**:
+it reports the presence of the comment, not which specific rule or
+finding it silences — see VALIDATION.md.
+
+### Fixed — an inline `eslint-disable` comment could still silence every finding it named
+Found in review, before this ever shipped: adding the finding above was
+not enough on its own — every rule this package enables is an ordinary
+ESLint rule, and ESLint honors an inline disable comment by default, so
+`/* eslint-disable */` on line 1 still silenced everything it named for
+scoring purposes, same as it always had. A 10-test file (a hard wait plus
+a tautological assertion in every test) scored 35/F; the same file with
+that one comment on line 1 scored **99/A** — the new
+`pwscore/eslint-disable-comment` finding was reported, but the four real
+findings it was covering for were simply gone. ESLint 9's flat-config
+`linterOptions.noInlineConfig` (see `eslint-runner.ts`) now makes every
+inline directive comment inert for this package's rule set: the comment
+itself is still scored via `pwscore/eslint-disable-comment`, but it can
+no longer also make the finding it targets disappear. The "Known
+limitation" above is narrower as a result — a disable comment can no
+longer silence anything this package's own rules find, it just isn't
+attributed to which specific rule it named.
+
+### Removed — `strict` profile
+1.1.0 (never published) planned a `strict` profile to gate the four rules
+above and the `eslint-disable-comment` finding behind an opt-in, leaving
+`standard` unchanged. With all of them scored under `standard` directly
+as of v4, `strict` would be byte-for-byte identical to `standard` —
+nothing left to gate. `--profile strict` on the CLI now errors with a
+migration message; the library API degrades a legacy `'strict'` string
+to `standard` weights, same fallback as the `guardian` profile's removal
+in 1.0.0.
+
+### Fixed — `.pw.ts` spec discovery
+Directory/glob discovery now recognizes `*.pw.ts` (joining `.spec.`,
+`.test.`, `.e2e.`, `.e2e-spec.`, `.e2e-test.`) — Flagsmith's entire
+20-spec `frontend/e2e` suite (`billing-test.pw.ts`, `flag-tests.pw.ts`,
+...) previously hard-failed as "no files matched" despite being a fully
+healthy, populated suite, the same failure mode `.e2e.ts`/`.e2e-spec.ts`
+were fixed for in 1.0.0 and its predecessors.
+
+### Added — acceptance bars: official examples score high, 100 is reachable
+`tests/official-examples.test.ts` vendors unmodified (attribution header
+only) specs from microsoft/playwright (Apache-2.0; see
+`fixtures/playwright-official/NOTICE.md`) and asserts each scores >= 90
+and grades A under `standard` — three `examples/todomvc` specs (100/A
+each) and `examples/github-api/tests/test-api.spec.ts` (97/A). Checked
+that the 97, not 100, isn't an unfair penalty: the file's only finding is
+`pwscore/eslint-disable-comment` on its own `/* eslint-disable
+notice/notice */` licence-header lint escape (Playwright's monorepo
+convention, unrelated to Playwright/test quality — see NOTICE.md), −3
+points (structure dimension 100→80, weighted). That's correct, not a
+bug: this project scores every suppression-directive comment as a real,
+unconditional demerit regardless of what it's aimed at (see the "Added —
+inline eslint-disable comments" entry above and VALIDATION.md's Known
+limitations) — a licence-header opt-out is still, mechanically, an
+`eslint-disable` comment. 97/A comfortably clears the >= 90 bar either
+way.
+`examples/svgomg/tests/example.spec.ts` was investigated and excluded
+(79/C, genuine non-idiomatic CSS/text-selector usage predating current
+Playwright locator guidance, not a scorer bug — documented in NOTICE.md).
+A new hand-written `fixtures/gold.spec.ts` scores exactly 100 with zero
+findings, proving 100 is reachable, not just a theoretical ceiling.
+
+## 1.0.0 — 2026-08-28
+
+First stable release. The scoring model (v3), CLI contract, library API,
+and GitHub Action inputs/outputs are now considered stable — breaking
+changes to any of them mean a major version bump from here on.
+
+### Fixed — locator ratio
+- **`getByAltText` and `getByTitle` now count as native locators.** They
+  are part of Playwright's own `getBy*` family but were missing from the
+  native set, so an image-heavy suite using alt/title locators plus a
+  single `.locator()` fallback scored 0/100 on the locators dimension for
+  perfectly idiomatic code. Scores can only improve or stay the same under
+  this fix (the native count grows; raw counting is unchanged). The
+  17-suite validation corpus was re-run — see VALIDATION.md.
+
+### Added — public API for composing layers
+- `getTestSpans` and `attributeFindingScopes` are now exported. A caller
+  layering its own rules on top of `standard` (an extra private dimension,
+  say) can attribute its findings to test/hook/module scope with the exact
+  logic the package uses internally, then score the dimension with the
+  already-exported `ratioDimensionScore` — reused, not reimplemented, so
+  the math can't drift.
+
+## 0.5.0 — 2026-08-27
+
+### Changed — scoring model v3: "the weighted share of your tests that are clean"
+- **The density model is gone.** v1/v2 scored findings per 25 lines of
+  code through an exponential decay with a minimum-slots floor. That was
+  unexplainable ("0.5 penalty units per slot"), structurally lenient on
+  small suites, and gameable — padding a suite with clean lines diluted
+  the penalty. All of it (K, slot divisor, minimum slots, per-rule caps,
+  `e^-x`) is removed.
+- **Model v3**: every finding is attributed to the test it sits in via AST
+  test spans. A test accumulates demerits per dimension (error 1.0,
+  warning 0.4, capped at 1 — a test is at worst fully flawed); findings in
+  before/after hooks demerit every test in the file; module-level findings
+  count once per file. Each dimension is
+  `100 × (1 − demerits/tests)`; locators stays the native/raw usage
+  ratio; final score is the weighted sum (40/25/20/15), unchanged grades.
+- The motivating example (3 tests: two hard waits, two assertion-free, one
+  skipped) scores **53/F** — it was 78/C under v1 density math and 64/D
+  under v2.
+- **In-house acronyms removed**: the score version is now plainly `v3`
+  (JSON `scoreVersion: "v3"`); "sqs-*" no longer appears anywhere in
+  output, docs, or code.
+- `summary.cleanTests` added (tests with no demerit in any dimension);
+  text output now prints `clean tests=N/M`.
+- **Removed exports**: `SQS_V1`, `SQS_V2`, `penaltyDimensionScore`,
+  `applyPerRuleCap` (the density machinery). `MODEL` and
+  `ratioDimensionScore` replace them. Callers composing house rules on
+  top (QA Guardian's `playwright_runner`) should migrate when they bump.
+
+## 0.4.0 — 2026-08-27
+
+### Changed — score version `sqs-v2`
+- **Assertions dimension is now a per-test coverage ratio** instead of a
+  finding-density penalty. sqs-v1's density math misread assertion
+  coverage badly on small suites: 2 of 3 tests asserting nothing scored
+  82/100 on the dimension (and the overall example suite 78/C) because two
+  findings in a tiny file barely register per-SLOC. Whether a test asserts
+  anything is a fraction of tests, not a smell rate — so, like the
+  locators dimension, the primary signal is now
+  `coverage = assertedTests / tests` (an **uncapped** census of
+  `playwright/expect-expect` findings, taken after all delegation
+  resolution), decayed multiplicatively by the density load of the
+  remaining assertion-quality rules (`valid-expect`,
+  `no-standalone-expect`, `prefer-web-first-assertions`). The motivating
+  example now scores the dimension 33 and the suite 64/D.
+- Everything else — weights, hygiene/structure density math, locator
+  ratio, constants, grades — is unchanged. Per METHODOLOGY's change
+  policy this is a new score version: results now report `sqs-v2`.
+- `summary.unassertedTests` added to the JSON output; the text formatter
+  prints `tests asserting=N/M`.
+- `SQS_V1` export is deprecated and aliases `SQS_V2` (identical
+  constants); it will be removed in a future release.
+
+## 0.3.0 — 2026-08-27
+
+### Fixed
+- **Nine documented sqs-v1 rules never ran.** `buildConfig` spread
+  eslint-plugin-playwright's `flat/recommended` config only when it was an
+  array, but the plugin exports a single config object — so the whole
+  recommended set was silently dropped, and every rule that relied on it
+  was inert. Concretely: `no-conditional-in-test`, `no-conditional-expect`,
+  `no-element-handle`, `no-eval`, `no-page-pause`, `no-useless-await`,
+  `valid-expect`, `no-standalone-expect`, and `max-nested-describe` were
+  all mapped to dimensions in `profiles.ts` (and METHODOLOGY.md's hygiene
+  dimension explicitly lists "handles, conditionals") yet could never
+  produce a finding. A spec whose tests were built entirely out of
+  `if (await locator.isVisible())` branches scored a clean 100.
+- The fix enables the intended rule set **explicitly and frozen** in
+  `eslint-runner.ts` rather than re-spreading upstream `recommended`:
+  eslint-plugin-playwright is a `^` range dependency, and inheriting its
+  recommended set at install time would let identical code score
+  differently across installs. Severities mirror upstream flat/recommended
+  (2.x). `require-top-level-describe` remains deliberately disabled
+  (stylistic; not in upstream recommended; would penalize idiomatic
+  describe-less suites).
+
+### Scoring impact
+- The formula, weights, and constants are unchanged — this restores the
+  *documented* sqs-v1 rule inputs, so the score version stays `sqs-v1`.
+  Suites that use conditional test logic, element handles, `page.pause()`,
+  or malformed/standalone `expect` calls will score **lower** than under
+  0.2.0 (which could not see those findings at all). Clean suites are
+  unaffected — all `good-*` fixtures score identically.
+
+## 0.2.0 — 2026-08-19
+
+### Removed
+- **The `guardian` profile.** It was QA Guardian's own internal codegen
+  house-rules layer — arbitrary product-specific conventions (e.g.
+  "timeouts must be exactly 2000 or 20000ms") never claimed as official
+  Playwright doctrine, and not part of this package's actual differentiated
+  value (the aggregate score, locator-ratio tracing, assertion-delegation
+  resolution — all in `standard`). Shipping one company's house rules
+  inside a general-purpose public tool undermined the "this is a neutral
+  community linter" positioning the rest of this project has been built
+  around. `ProfileName` is now `'standard'` only; `--profile guardian` on
+  the CLI now exits 2 with an explicit message pointing here instead of
+  silently doing something unexpected. Passing an unrecognized profile
+  string programmatically (e.g. a caller still pinned to the old contract)
+  falls back to `standard`'s weights rather than throwing — a defensive
+  guard, not an invitation to keep using it.
+  QA Guardian's own `playwright_runner` now runs its private house-rules
+  layer separately, composed with this package's public `standard`
+  profile — verified byte-for-byte identical output to the old built-in
+  `guardian` profile across every fixture and 15 real production specs
+  before cutover. `penaltyDimensionScore`/`applyPerRuleCap` are now
+  exported (they always existed internally) specifically so that
+  composition — or anyone else building a similar house-rules layer on
+  top of `standard` — doesn't have to reimplement the scoring math.
+- `scripts/dogfood.sh` — it reached into a relative sibling-repo path that
+  only exists inside this project's private internal monorepo, and
+  defaulted to the now-removed `guardian` profile. Internal-only tooling
+  that never belonged in a public repo; `scripts/validate-corpus.sh`
+  (real public repos, no internal paths) is the tool for this now.
+
+## 0.1.14 — 2026-08-19
+
+### Fixed
+- **CLI stdout truncation on large output.** `console.log(body)` immediately
+  followed by `process.exit()` raced Node's async pipe write against
+  process termination — for output over ~64KB (a real suite's 1,215-finding
+  JSON report, ~370KB), the write was silently cut at exactly the pipe
+  buffer boundary when stdout wasn't a TTY (piped to `jq`, a CI log
+  processor, anything). No error, just truncated, invalid output. Found
+  while building `scripts/validate-corpus.sh` — reproduced with `--out
+  file.json` (full 376,920 bytes) vs. piped (exactly 65,536 bytes) against
+  the same input. Fixed by using `process.exitCode` instead of
+  `process.exit()` everywhere in the CLI, which lets Node exit naturally
+  once pending I/O actually drains — the standard fix for this class of
+  bug. 3 new tests spawn the real CLI binary as a child process (the only
+  way to reproduce a stdout-pipe bug — the existing suite only ever called
+  `scorePaths()` in-process).
+- **`.e2e-spec.`/`.e2e-test.` naming conventions weren't discovered either**
+  — the same gap as 0.1.13's `.e2e.` fix, one suffix short. Verified
+  against Immich: 13 real Playwright specs named `*.e2e-spec.ts`,
+  previously invisible, sitting alongside 31 *other* files using the
+  identical suffix for `vitest`/`supertest` backend tests — correctly
+  excluded by the existing `looksLikeNonPlaywrightTest` safety net once
+  discovery found them. `SPEC_GLOBS` now also matches
+  `*.e2e-spec.*`/`*.e2e-test.*`.
+
+### Added
+- **`scripts/validate-corpus.sh`** — re-runnable real-world validation:
+  shallow/sparse-clones 17 real public repos fresh and scores each with the
+  local build. See `VALIDATION.md` for the current results and the story
+  behind every fix that came from running it.
+
+## 0.1.13 — 2026-08-19
+
+### Fixed
+- **Directory/glob discovery only matched `*.spec.*`/`*.test.*` — a repo
+  using `.e2e.` to disambiguate end-to-end specs from unit tests scored a
+  hard 0/F ("no files matched") no matter how healthy its suite actually
+  was.** Verified against a real, large, well-known repo (cal.com:
+  `apps/web/playwright/` — 53 real Playwright specs, all named `*.e2e.ts`,
+  zero `*.spec.ts`/`*.test.ts`). `SPEC_GLOBS` now also matches
+  `*.e2e.{ts,tsx,js,jsx}`. Re-scored: 0/F, no files matched → 85/B, PASS,
+  53 files / 278 tests found — and the findings are real (642
+  `no-raw-locators`, spot-checked against the actual source), not noise
+  introduced by the wider glob.
+  `.e2e.` is also Cypress's own scaffolding convention, so
+  `looksLikeNonPlaywrightTest` (the existing safety net for a broad glob
+  sweeping in a different framework's tests) gained an explicit Cypress
+  check — an import from `'cypress'`, or common `cy.*` command usage
+  (`cy.visit`, `cy.get`, `cy.contains`, ...) with no import at all, since
+  Cypress's globals are injected the same way React Testing Library's
+  `screen` often is. Matched on specific command names, not a bare `cy.`
+  prefix, so a Playwright spec with an unrelated local variable named `cy`
+  is never caught by mistake.
+  9 new tests, full real-world corpus re-verified with zero regressions.
+
+## 0.1.12 — 2026-08-19
+
+### Fixed
+- **Assertion-helper delegation was invisible for class-based Page Object
+  Models — `findLocalAssertionHelperNames` only recognized free functions
+  and `const`-bound arrows, never a class method.** Since almost every
+  real-world POM is written as a class, this meant the cross-file
+  assertion-delegation tracing shipped in 0.1.11 didn't actually reach the
+  common case. Now also collects `MethodDefinition` (`kind: 'method'`)
+  candidates.
+- **`.waitFor({ state })` (state defaults to `'visible'`) is now recognized
+  as an assertion equivalent to `expect(...)`.** It exists only to verify
+  a state, unlike an action method that merely throws on failure as a
+  side effect — functionally the same as `expect(locator).toBeVisible()`.
+  Matched on the exact property name `waitFor`, never confused with
+  `waitForEvent`/`waitForURL`/`waitForResponse`/`waitForLoadState`/
+  `waitForTimeout`, none of which are assertions.
+- **Delegation through more than one call is now resolved within a single
+  file** — e.g. a `waitForNotificationAndClose()` method calling
+  `this.waitForNotification()`, which itself calls `.waitFor()`, two
+  calls removed from anything expect-expect could previously see. A
+  bounded fixed-point pass: any candidate calling (by name, any receiver —
+  same matching eslint-plugin-playwright's own `assertFunctionNames`
+  option already uses) something already recognized is added too, until
+  no new names are found.
+  Verified against the real suite this was found in (n8n): its
+  `NotificationsPage.waitForNotificationAndClose` is exactly this shape,
+  two calls deep, defined in the same file as `waitForNotification`. Files
+  with an `expect-expect` finding dropped from ~15 to 5 across n8n's 256
+  specs; the remaining ones are a different, disclosed pattern (some tests
+  signal failure by throwing directly rather than asserting a state —
+  still open, not attempted here). Re-verified against the full real-world
+  corpus (Playwright, Supabase, Storybook, freeCodeCamp, OpenMRS,
+  patient-chart, 15 real Guardian specs) with zero regressions.
+
+## 0.1.11 — 2026-08-17
+
+### Fixed
+- **Page Object Model suites read as 0/100 on the locators dimension even
+  when the suite uses native locators throughout.** A spec file that routes
+  all interaction through an imported class (`canvas.addNode(...)` instead
+  of `page.getByRole(...)` directly) has zero locator calls of its own —
+  the real `getByRole`/`getByTestId`/`.locator()` calls live in a separate
+  page-object file the scorer never looked at. Verified against a real,
+  large suite (n8n's own e2e tests: 256 spec files, 1,046 tests, every one
+  of them at 0 direct locator calls) — it scored 79/C and *failed* the
+  default threshold for this reason alone; the suite's actual page objects
+  use native locators almost exclusively.
+  `src/import-graph.ts` now follows a spec file's *relative* imports
+  (`./`, `../` only — never a bare package specifier, npm dependency, or
+  path alias, which would need a real module resolver to resolve safely)
+  to locate local dependency files within the scanned directory, and folds
+  their locator counts into the suite-level ratio. Dependency files are
+  never linted and never count toward SLOC/tests/findings — only their
+  locator calls are attributed to the suite. Bounded deliberately (depth
+  and file-count capped, confined to the scanned directory) so a large or
+  circular import graph can't blow up cost. Re-scoring n8n's suite with
+  this fix: 79/C (FAIL) → 95/A (PASS).
+  As a byproduct of the same infrastructure, assertion delegated to an
+  *imported* helper function (not just a same-file one, which already
+  worked — see 0.1.7) is now also recognized by `expect-expect`.
+- Fixed a related bug found while building the above: the import-tracing
+  boundary was initially set to the scored spec files' own common
+  ancestor, which is *narrower* than the actual project directory whenever
+  specs live in a dedicated `tests/` folder sibling to `pages/`/
+  `fixtures/` (the normal shape for this pattern) — every import climbing
+  back out of `tests/` was rejected as "outside the boundary." Fixed by
+  widening the boundary to the directory the caller actually pointed the
+  scanner at. Does not apply when every input is an explicit file path
+  with no directory to widen to — see the new regression test documenting
+  that limitation.
+
+## 0.1.10 — 2026-08-15
+
+### Added
+- **Reusable GitHub Action** (`action.yml` at repo root, usable as
+  `qa-guardian/playwright-score@v1`). Runs the scorer, writes a job summary
+  (always — no extra permissions needed), optionally posts/updates a sticky
+  PR comment with the full findings, and gates or warns on the threshold
+  via `mode: gate|warn` (mirrors the existing `SPEC_SCORE_MODE` convention
+  from the QA Guardian integration). Exposes `score`/`grade`/`pass` as step
+  outputs. Not yet published to the Marketplace or exercised in a live
+  workflow — validated locally by running the same commands/JSON parsing
+  the action performs against the built CLI, not by an actual GitHub
+  Actions run.
+- **CI auto-publish** (`.github/workflows/publish.yml`): on push to `main`
+  touching `package.json`, builds, tests, and publishes to npm only if the
+  local version isn't already on the registry. Authenticates via npm's
+  **Trusted Publisher (OIDC)** flow (`id-token: write`, no stored token) —
+  chosen over a classic automation token specifically because npm is
+  restricting 2FA-bypass tokens for direct publishing starting January 2027;
+  OIDC isn't affected and has nothing to rotate or expire. Requires the
+  trusted publisher configured once on npmjs.com (package settings →
+  Trusted Publisher → GitHub Actions → repo `qa-guardian/playwright-score`,
+  workflow `publish.yml`) and npm CLI ≥11.5.1 / Node ≥22.14.0 in the runner
+  (both satisfied by `actions/setup-node@v4` with `node-version: '22'`).
+
+### Chore
+- No functional change beyond the above. Version bump to verify the new
+  CI auto-publish pipeline (`.github/workflows/publish.yml`,
+  Trusted Publisher/OIDC) works end-to-end against the real npm registry.
+
+## 0.1.9 — 2026-08-15
+
+### Fixed
+- **`playwright/prefer-locator` and `playwright/prefer-native-locators` were
+  mapped in `profiles.ts` but never actually enabled — completely inert.**
+  `prefer-locator` specifically catches Playwright's older direct-action API
+  (`page.click('#foo')` instead of a locator or native locator), arguably
+  the single most common raw-selector anti-pattern in naive/AI-generated
+  code. Also extended `countLocators`'s raw/native ratio to recognize this
+  pattern (`click`/`dblclick`/`hover`/`check`/`uncheck`/`tap`/`focus` called
+  with a string selector as the first argument — methods a real `Locator`
+  never accepts a string for, so this is unambiguous regardless of receiver
+  name; `fill`/`type`/`press`/`selectOption` are deliberately excluded since
+  their first argument is legitimately a string on a `Locator` too).
+  Verified manually: a realistic "naive AI-generated" test sample using
+  nothing but `page.click(selector)`/`page.type(selector, ...)` went from a
+  misleading 85/B (PASS) to a correct 65/D (FAIL). Re-validated against the
+  full real-world corpus (~130 files across freeCodeCamp, OpenMRS, patient
+  chart, and Storybook e2e suites, plus 15 real Guardian specs) — no new
+  false positives.
+
+## 0.1.8 — 2026-08-15
+
+### Fixed
+- **Directory/glob scanning did not exclude `node_modules` (or `dist`,
+  `build`, `.next`, `coverage`, and similar vendored/generated
+  directories).** Verified as a real bug: running the CLI against a
+  project root that has any dependency shipping its own `*.spec.ts`/
+  `*.test.ts` files silently swept those in alongside real specs. Every
+  comparable tool in this space (ESLint, Prettier, Jest) default-excludes
+  these directories for the same reason. Re-verified against a real
+  823MB `node_modules` containing 385 spec-like files: now correctly
+  excluded, and fast (glob itself skips traversing into the ignored
+  directories, not just filtering results afterward). An explicit file
+  path always bypasses this, same as the non-Playwright-test filter.
+
+## 0.1.7 — 2026-08-15
+
+Deeper real-world validation: ~10 more single-file pulls (API-only specs,
+mobile device emulation, deeply-chained fixtures, Japanese-language
+content) plus a full clone of freeCodeCamp's e2e suite (89 spec files)
+scored as one directory. No crashes; UTF-8/multi-byte content (Japanese,
+Chinese, emoji seen across this and the previous round) parses and scores
+correctly throughout.
+
+### Fixed
+- **The `assertFunctionPatterns` name-guessing from 0.1.6 was still
+  fundamentally unbounded.** A fourth real production file used yet
+  another naming convention (`alertToBeVisible`, imported from another
+  module) for the exact same assertion-delegation shape, and a fifth
+  (`checkFlashMessageVisibility`) didn't match any reasonable prefix/suffix
+  pattern at all — real codebases name these helpers however they want.
+  Replaced pure name-guessing with `findLocalAssertionHelperNames`: a
+  same-file call-graph pass that discovers any function (declared or
+  const-bound to an arrow/function expression) whose own body actually
+  contains an `expect(...)`-shaped call, regardless of what it's named,
+  and feeds the result into `playwright/expect-expect`'s own
+  `assertFunctionNames` option per run. This is fully name-agnostic for
+  the common (same-file helper) case; the name-pattern list from 0.1.6
+  remains only as a fallback for helpers imported from another file, which
+  can't be resolved without following module specifiers — a narrower,
+  clearly-scoped residual limitation.
+
+## 0.1.6 — 2026-08-15
+
+Further real-world validation: ~45 more spec files across single-file
+pulls (visual regression, accessibility, file upload, iframes, auth
+setup, Storybook) and three fully-cloned real e2e suites (openmrs-esm-core,
+openmrs-esm-patient-chart, storybook) scored as whole directories. No
+crashes across ~100+ real files total (this round plus 0.1.5's); all
+formatters (text/json/markdown/sarif) and `--out` file writing checked at
+that scale too.
+
+### Fixed
+- **`playwright/expect-expect` can only see `expect(...)` calls written
+  directly in a test body — it has no way to trace an assertion made
+  inside a helper function the test calls.** Delegating assertions to a
+  shared helper (e.g. an `audit(page, path)` a11y check reused across many
+  near-identical tests, or an `expectXToBeVisible(page)` helper) is a very
+  common way to dedupe similar specs, and was flagged as "no assertions"
+  at error severity — verified against two real production files (one
+  losing 2 tests' worth of real signal to this). Configured
+  `assertFunctionPatterns` (eslint-plugin-playwright's own documented
+  escape hatch for this) with a conservative, camelCase/exact-anchored
+  pattern set (`assert*`, `verify*`, `validate*`, `audit*`, `expect*`,
+  `checkA11y`, `checkAccessibility`) — anchored so e.g. `checkoutFlow`
+  doesn't collide with a bare `check*` prefix.
+
+## 0.1.5 — 2026-08-15
+
+Validated against ~16 real-world Playwright spec files pulled from public
+GitHub repos (react-joyride, openmrs, rancher-desktop, stylelint-demo,
+Microsoft's own Playwright test suite, and others) plus the sample suites
+already dogfooded internally, in addition to unit/integration coverage.
+Found and fixed three more real false positives this surfaced:
+
+### Fixed
+- **`expect.poll()`/`expect.soft()` assertions weren't recognized as
+  assertions at all.** A source-text-regex check (`metrics/no-empty-test`)
+  only matched a bare `expect(` call, so any file whose only assertion
+  used the poll/soft chained form was flagged at **error** severity as
+  having no assertions — on a real file that unambiguously polls until a
+  condition is true. The AST-based community `playwright/expect-expect`
+  rule (already active) handles this correctly on its own, so the
+  redundant, buggy regex check has been removed rather than patched
+  further.
+- **Playwright's own documented conditional `test.skip(condition, reason)`
+  was flagged identically to an always-skipped test declaration.**
+  `eslint-plugin-playwright`'s `no-skipped-test` doesn't distinguish
+  `test.skip('name', fn)` (a test that never runs — worth flagging) from
+  `test.skip(browserName === 'webkit', 'reason')` (Playwright's documented
+  API for conditionally skipping at runtime — playwright.dev/docs/test-annotations#conditionally-skip-a-test).
+  Verified against a real cross-browser test file where this generated
+  five warnings on entirely idiomatic code. Replaced with
+  `pwscore/no-skipped-test-declaration`, which tells the two apart by
+  whether the trailing argument is a function (a declaration always
+  supplies one; a conditional skip's second argument, if any, is the
+  reason string) — same severity for the real anti-pattern, none for the
+  documented one.
+- **`// eslint-disable-next-line @typescript-eslint/no-unused-vars` (and
+  any other disable comment referencing a rule we don't bundle) produced a
+  confusing non-finding.** We only embed `@typescript-eslint`'s *parser*,
+  not its rule set, so ESLint reports "Definition for rule '...' was not
+  found" for any disable directive targeting one of its rules — a
+  diagnostic about our own rule coverage, not the spec's quality. This
+  pattern is extremely common in real TypeScript code (any repo that also
+  lints with `@typescript-eslint`, react-hooks, import, etc.). These
+  messages are now dropped entirely instead of appearing as a report-only
+  finding.
+
+## 0.1.4 — 2026-08-15
+
+Comprehensive correctness/hardening pass ahead of public launch.
+
+### Fixed
+- **A spec file with a syntax error scored a perfect 100/A.** ESLint
+  reports parse errors as a message with `fatal:true` and `ruleId:null`;
+  those were silently dropped by the same filter that skips harmless
+  "file ignored" notices. A file that isn't even valid JS/TS is now a hard
+  fail (score 0 / grade F) with an explicit `playwright-score/parse-error`
+  finding, instead of the worst possible outcome for a tool whose job is
+  catching bad — including AI-generated — code.
+- **Directory/glob scanning could sweep in unrelated Jest/Vitest/RTL unit
+  tests** sitting next to real Playwright specs (a very common repo
+  layout, e.g. `src/Button.test.tsx` next to `e2e/login.spec.ts`, both
+  matching a broad `*.test.ts`-style glob), silently polluting the
+  aggregate score. Files matched via directory/glob expansion are now
+  skipped when they show positive evidence of a non-Playwright framework
+  (an import from vitest/jest/mocha/jasmine/@testing-library, or RTL's
+  `screen.*`/`toBeInTheDocument()`); reported explicitly via the new
+  `skippedFiles` result field, not silently. Paths passed explicitly are
+  always scored regardless. An earlier version of this check tried to
+  *positively* require Playwright evidence instead and was reverted after
+  it silently skipped 18 of 19 genuine specs in a real production suite —
+  custom Playwright fixtures (`test/expect` re-exported from a project
+  fixtures module) can destructure arbitrarily-named fixtures, not just
+  `page`/`context`/`browser`, so there's no reliable positive signal.
+- **The new AST-based locator counter (added in the previous release)
+  silently returned zero for any `.tsx`/`.jsx` file containing real JSX**
+  (e.g. Playwright component tests), because `@typescript-eslint/parser`
+  doesn't enable JSX parsing by default and the failure was swallowed by
+  the same try/catch that handles genuinely unparseable source. JSX is now
+  enabled based on the file extension.
+- `test.fix(...)` isn't a real Playwright API — the actual modifier is
+  `test.fixme(...)`. Several guardian rules (`one-describe-one-test`,
+  `require-test-step`) and metric heuristics (`countTests`,
+  `findEmptyExpectTests`) checked for the nonexistent `.fix` spelling and
+  so never recognized real `test.fixme(...)` declarations.
+- `guardian/require-expect` only recognized bare `test(...)` calls, so
+  `test.only/skip/fixme/slow(...)` declarations with zero assertions went
+  unflagged by this rule specifically (the community `expect-expect` rule
+  still caught them as a redundant safety net, so real-world impact was
+  partial).
+- `guardian/one-describe-one-test` didn't recognize
+  `test.describe.serial/parallel/only/fixme(...)` as a describe form at
+  all (only bare `test.describe(...)` matched), and flagged
+  `test.describe.serial(...)`'s multiple ordered `test()` calls as
+  "sprawl" — but `describe.serial` is Playwright's own documented
+  mechanism for exactly that one-journey-multiple-ordered-tests pattern.
+- `guardian/no-hardcoded-secrets` matched "auth" as a bare substring, so
+  `authorName`, `isAuthenticated`, and similar common identifiers were
+  flagged as possible secrets. Matching is now whole-word (after
+  camelCase/snake_case splitting), so `authorName` no longer matches while
+  `authToken`/`apiKey`/`Authorization` still do.
+- `guardian/no-generic-long-timeout` flagged *any* object property named
+  `timeout` anywhere in the file — including unrelated business/fixture
+  data like `{ timeout: 1800 }` describing a session-length field — not
+  just `timeout` options passed to a Playwright call. Now scoped to
+  `timeout` properties passed inline as a call argument.
+- `prefer-web-first-assertions` was downgraded to `warn` with no stated
+  reason, softer than eslint-plugin-playwright's own recommended `error`
+  severity for a rule it treats as important. Aligned to match.
+
+### Added
+- `ScoreResult.skippedFiles`, and a summary of skipped files in the text
+  and markdown formatters.
+
+## 0.1.3 — 2026-08-14
+
+### Fixed
+- The `locators` dimension counted native/raw locator calls with a regex
+  anchored to literal `page`/`frame` receivers, undercounting raw locators
+  on any other receiver (e.g. `this.container.locator(...)` in a Page
+  Object Model, or a second `.locator()` chained off a prior locator call).
+  Counting now walks the same AST ESLint already parses, so it can't
+  silently disagree with `no-raw-locators` findings.
+- SARIF output pointed `informationUri` at a URL missing a hyphen
+  (`github.com/qaguardian/...` instead of `qa-guardian`), and
+  `artifactLocation.uri` used absolute filesystem paths, which GitHub code
+  scanning cannot map back to files in a PR diff. `Finding.file` (and so
+  every formatter, not just SARIF) is now relative to the files' common
+  ancestor directory instead of an absolute path.
+- Removed `guardian/prefer-uuid` and `guardian/fixtures-import` from the
+  rule→dimension map: they were referenced but never implemented or
+  enabled, so they could never fire.
+
+### Added
+- Fixture and integration test coverage for the 5 guardian rules that
+  previously had none: `no-hardcoded-secrets`, `no-generic-long-timeout`,
+  `one-describe-one-test`, `require-test-step`, `no-wait-for-load-state`.
+
+## 0.1.2 — 2026-08-14
+
+### Fixed
+- ESLint 9 flat config resolves a `basePath` from the `cwd` passed to it and
+  silently drops (no error, no `ruleId`) any file outside that path.
+  `scorePaths`/`runEslint` now derive the basePath from the common ancestor
+  of the files actually being linted instead of trusting the caller's `cwd`,
+  which is not guaranteed to contain them. Previously, any caller running
+  from an unrelated working directory got zero ESLint-based findings on
+  every file regardless of content.
+
+## 0.1.1 — 2026-08-03
+
+### Fixed
+- Empty file matches now hard-fail with score 0 / grade F instead of
+  reporting a misleadingly healthy ~99 pass.
+
+### Docs
+- Scoped-package CLI invocation docs (`npx -p @qaguardian/playwright-score`).
+- `--version` flag.
+
+## 0.1.0 — 2026-07-30
+
+Initial release. `sqs-v1` scoring: `standard` (community `eslint-plugin-playwright`
++ suite metrics) and `guardian` (house conventions) profiles. CLI with text,
+json, markdown, and sarif output. Library export via `scorePaths`.