@pulumi/kubernetes 3.23.0 → 3.23.1

package/types/networking/v1beta1/output.d.ts

@@ -1,309 +0,0 @@
-import * as outputs from "../../../types/output";
-/**
- * HTTPIngressPath associates a path regex with a backend. Incoming urls matching the path are forwarded to the backend.
- */
-export interface HTTPIngressPath {
-    /**
-     * Backend defines the referenced service endpoint to which the traffic will be forwarded to.
-     */
-    backend: outputs.networking.v1beta1.IngressBackend;
-    /**
-     * Path is an extended POSIX regex as defined by IEEE Std 1003.1, (i.e this follows the egrep/unix syntax, not the perl syntax) matched against the path of an incoming request. Currently it can contain characters disallowed from the conventional "path" part of a URL as defined by RFC 3986. Paths must begin with a '/'. If unspecified, the path defaults to a catch all sending traffic to the backend.
-     */
-    path: string;
-    /**
-     * PathType determines the interpretation of the Path matching. PathType can be one of the following values: * Exact: Matches the URL path exactly. * Prefix: Matches based on a URL path prefix split by '/'. Matching is
-     *   done on a path element by element basis. A path element refers is the
-     *   list of labels in the path split by the '/' separator. A request is a
-     *   match for path p if every p is an element-wise prefix of p of the
-     *   request path. Note that if the last element of the path is a substring
-     *   of the last element in request path, it is not a match (e.g. /foo/bar
-     *   matches /foo/bar/baz, but does not match /foo/barbaz).
-     * * ImplementationSpecific: Interpretation of the Path matching is up to
-     *   the IngressClass. Implementations can treat this as a separate PathType
-     *   or treat it identically to Prefix or Exact path types.
-     * Implementations are required to support all path types. Defaults to ImplementationSpecific.
-     */
-    pathType: string;
-}
-/**
- * HTTPIngressPath associates a path regex with a backend. Incoming urls matching the path are forwarded to the backend.
- */
-export interface HTTPIngressPathPatch {
-    /**
-     * Backend defines the referenced service endpoint to which the traffic will be forwarded to.
-     */
-    backend: outputs.networking.v1beta1.IngressBackendPatch;
-    /**
-     * Path is an extended POSIX regex as defined by IEEE Std 1003.1, (i.e this follows the egrep/unix syntax, not the perl syntax) matched against the path of an incoming request. Currently it can contain characters disallowed from the conventional "path" part of a URL as defined by RFC 3986. Paths must begin with a '/'. If unspecified, the path defaults to a catch all sending traffic to the backend.
-     */
-    path: string;
-    /**
-     * PathType determines the interpretation of the Path matching. PathType can be one of the following values: * Exact: Matches the URL path exactly. * Prefix: Matches based on a URL path prefix split by '/'. Matching is
-     *   done on a path element by element basis. A path element refers is the
-     *   list of labels in the path split by the '/' separator. A request is a
-     *   match for path p if every p is an element-wise prefix of p of the
-     *   request path. Note that if the last element of the path is a substring
-     *   of the last element in request path, it is not a match (e.g. /foo/bar
-     *   matches /foo/bar/baz, but does not match /foo/barbaz).
-     * * ImplementationSpecific: Interpretation of the Path matching is up to
-     *   the IngressClass. Implementations can treat this as a separate PathType
-     *   or treat it identically to Prefix or Exact path types.
-     * Implementations are required to support all path types. Defaults to ImplementationSpecific.
-     */
-    pathType: string;
-}
-/**
- * HTTPIngressRuleValue is a list of http selectors pointing to backends. In the example: http://<host>/<path>?<searchpart> -> backend where where parts of the url correspond to RFC 3986, this resource will be used to match against everything after the last '/' and before the first '?' or '#'.
- */
-export interface HTTPIngressRuleValue {
-    /**
-     * A collection of paths that map requests to backends.
-     */
-    paths: outputs.networking.v1beta1.HTTPIngressPath[];
-}
-/**
- * HTTPIngressRuleValue is a list of http selectors pointing to backends. In the example: http://<host>/<path>?<searchpart> -> backend where where parts of the url correspond to RFC 3986, this resource will be used to match against everything after the last '/' and before the first '?' or '#'.
- */
-export interface HTTPIngressRuleValuePatch {
-    /**
-     * A collection of paths that map requests to backends.
-     */
-    paths: outputs.networking.v1beta1.HTTPIngressPathPatch[];
-}
-/**
- * Ingress is a collection of rules that allow inbound connections to reach the endpoints defined by a backend. An Ingress can be configured to give services externally-reachable urls, load balance traffic, terminate SSL, offer name based virtual hosting etc.
- *
- * This resource waits until its status is ready before registering success
- * for create/update, and populating output properties from the current state of the resource.
- * The following conditions are used to determine whether the resource creation has
- * succeeded or failed:
- *
- * 1.  Ingress object exists.
- * 2.  Endpoint objects exist with matching names for each Ingress path (except when Service
- *     type is ExternalName).
- * 3.  Ingress entry exists for '.status.loadBalancer.ingress'.
- *
- * If the Ingress has not reached a Ready state after 10 minutes, it will
- * time out and mark the resource update as Failed. You can override the default timeout value
- * by setting the 'customTimeouts' option on the resource.
- */
-export interface Ingress {
-    /**
-     * APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
-     */
-    apiVersion: "networking.k8s.io/v1beta1";
-    /**
-     * Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
-     */
-    kind: "Ingress";
-    /**
-     * Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
-     */
-    metadata: outputs.meta.v1.ObjectMeta;
-    /**
-     * Spec is the desired state of the Ingress. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
-     */
-    spec: outputs.networking.v1beta1.IngressSpec;
-    /**
-     * Status is the current state of the Ingress. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
-     */
-    status: outputs.networking.v1beta1.IngressStatus;
-}
-/**
- * IngressBackend describes all endpoints for a given service and port.
- */
-export interface IngressBackend {
-    /**
-     * Resource is an ObjectRef to another Kubernetes resource in the namespace of the Ingress object. If resource is specified, serviceName and servicePort must not be specified.
-     */
-    resource: outputs.core.v1.TypedLocalObjectReference;
-    /**
-     * Specifies the name of the referenced service.
-     */
-    serviceName: string;
-    /**
-     * Specifies the port of the referenced service.
-     */
-    servicePort: number | string;
-}
-/**
- * IngressBackend describes all endpoints for a given service and port.
- */
-export interface IngressBackendPatch {
-    /**
-     * Resource is an ObjectRef to another Kubernetes resource in the namespace of the Ingress object. If resource is specified, serviceName and servicePort must not be specified.
-     */
-    resource: outputs.core.v1.TypedLocalObjectReferencePatch;
-    /**
-     * Specifies the name of the referenced service.
-     */
-    serviceName: string;
-    /**
-     * Specifies the port of the referenced service.
-     */
-    servicePort: number | string;
-}
-/**
- * IngressClass represents the class of the Ingress, referenced by the Ingress Spec. The `ingressclass.kubernetes.io/is-default-class` annotation can be used to indicate that an IngressClass should be considered default. When a single IngressClass resource has this annotation set to true, new Ingress resources without a class specified will be assigned this default class.
- */
-export interface IngressClass {
-    /**
-     * APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
-     */
-    apiVersion: "networking.k8s.io/v1beta1";
-    /**
-     * Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
-     */
-    kind: "IngressClass";
-    /**
-     * Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
-     */
-    metadata: outputs.meta.v1.ObjectMeta;
-    /**
-     * Spec is the desired state of the IngressClass. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
-     */
-    spec: outputs.networking.v1beta1.IngressClassSpec;
-}
-/**
- * IngressClassSpec provides information about the class of an Ingress.
- */
-export interface IngressClassSpec {
-    /**
-     * Controller refers to the name of the controller that should handle this class. This allows for different "flavors" that are controlled by the same controller. For example, you may have different Parameters for the same implementing controller. This should be specified as a domain-prefixed path no more than 250 characters in length, e.g. "acme.io/ingress-controller". This field is immutable.
-     */
-    controller: string;
-    /**
-     * Parameters is a link to a custom resource containing additional configuration for the controller. This is optional if the controller does not require extra parameters.
-     */
-    parameters: outputs.core.v1.TypedLocalObjectReference;
-}
-/**
- * IngressClassSpec provides information about the class of an Ingress.
- */
-export interface IngressClassSpecPatch {
-    /**
-     * Controller refers to the name of the controller that should handle this class. This allows for different "flavors" that are controlled by the same controller. For example, you may have different Parameters for the same implementing controller. This should be specified as a domain-prefixed path no more than 250 characters in length, e.g. "acme.io/ingress-controller". This field is immutable.
-     */
-    controller: string;
-    /**
-     * Parameters is a link to a custom resource containing additional configuration for the controller. This is optional if the controller does not require extra parameters.
-     */
-    parameters: outputs.core.v1.TypedLocalObjectReferencePatch;
-}
-/**
- * IngressRule represents the rules mapping the paths under a specified host to the related backend services. Incoming requests are first evaluated for a host match, then routed to the backend associated with the matching IngressRuleValue.
- */
-export interface IngressRule {
-    /**
-     * Host is the fully qualified domain name of a network host, as defined by RFC 3986. Note the following deviations from the "host" part of the URI as defined in the RFC: 1. IPs are not allowed. Currently an IngressRuleValue can only apply to the
-     * 	  IP in the Spec of the parent Ingress.
-     * 2. The `:` delimiter is not respected because ports are not allowed.
-     * 	  Currently the port of an Ingress is implicitly :80 for http and
-     * 	  :443 for https.
-     * Both these may change in the future. Incoming requests are matched against the host before the IngressRuleValue. If the host is unspecified, the Ingress routes all traffic based on the specified IngressRuleValue.
-     */
-    host: string;
-    http: outputs.networking.v1beta1.HTTPIngressRuleValue;
-}
-/**
- * IngressRule represents the rules mapping the paths under a specified host to the related backend services. Incoming requests are first evaluated for a host match, then routed to the backend associated with the matching IngressRuleValue.
- */
-export interface IngressRulePatch {
-    /**
-     * Host is the fully qualified domain name of a network host, as defined by RFC 3986. Note the following deviations from the "host" part of the URI as defined in the RFC: 1. IPs are not allowed. Currently an IngressRuleValue can only apply to the
-     * 	  IP in the Spec of the parent Ingress.
-     * 2. The `:` delimiter is not respected because ports are not allowed.
-     * 	  Currently the port of an Ingress is implicitly :80 for http and
-     * 	  :443 for https.
-     * Both these may change in the future. Incoming requests are matched against the host before the IngressRuleValue. If the host is unspecified, the Ingress routes all traffic based on the specified IngressRuleValue.
-     */
-    host: string;
-    http: outputs.networking.v1beta1.HTTPIngressRuleValuePatch;
-}
-/**
- * IngressSpec describes the Ingress the user wishes to exist.
- */
-export interface IngressSpec {
-    /**
-     * A default backend capable of servicing requests that don't match any rule. At least one of 'backend' or 'rules' must be specified. This field is optional to allow the loadbalancer controller or defaulting logic to specify a global default.
-     */
-    backend: outputs.networking.v1beta1.IngressBackend;
-    /**
-     * IngressClassName is the name of the IngressClass cluster resource. The associated IngressClass defines which controller will implement the resource. This replaces the deprecated `kubernetes.io/ingress.class` annotation. For backwards compatibility, when that annotation is set, it must be given precedence over this field. The controller may emit a warning if the field and annotation have different values. Implementations of this API should ignore Ingresses without a class specified. An IngressClass resource may be marked as default, which can be used to set a default value for this field. For more information, refer to the IngressClass documentation.
-     */
-    ingressClassName: string;
-    /**
-     * A list of host rules used to configure the Ingress. If unspecified, or no rule matches, all traffic is sent to the default backend.
-     */
-    rules: outputs.networking.v1beta1.IngressRule[];
-    /**
-     * TLS configuration. Currently the Ingress only supports a single TLS port, 443. If multiple members of this list specify different hosts, they will be multiplexed on the same port according to the hostname specified through the SNI TLS extension, if the ingress controller fulfilling the ingress supports SNI.
-     */
-    tls: outputs.networking.v1beta1.IngressTLS[];
-}
-/**
- * IngressSpec describes the Ingress the user wishes to exist.
- */
-export interface IngressSpecPatch {
-    /**
-     * A default backend capable of servicing requests that don't match any rule. At least one of 'backend' or 'rules' must be specified. This field is optional to allow the loadbalancer controller or defaulting logic to specify a global default.
-     */
-    backend: outputs.networking.v1beta1.IngressBackendPatch;
-    /**
-     * IngressClassName is the name of the IngressClass cluster resource. The associated IngressClass defines which controller will implement the resource. This replaces the deprecated `kubernetes.io/ingress.class` annotation. For backwards compatibility, when that annotation is set, it must be given precedence over this field. The controller may emit a warning if the field and annotation have different values. Implementations of this API should ignore Ingresses without a class specified. An IngressClass resource may be marked as default, which can be used to set a default value for this field. For more information, refer to the IngressClass documentation.
-     */
-    ingressClassName: string;
-    /**
-     * A list of host rules used to configure the Ingress. If unspecified, or no rule matches, all traffic is sent to the default backend.
-     */
-    rules: outputs.networking.v1beta1.IngressRulePatch[];
-    /**
-     * TLS configuration. Currently the Ingress only supports a single TLS port, 443. If multiple members of this list specify different hosts, they will be multiplexed on the same port according to the hostname specified through the SNI TLS extension, if the ingress controller fulfilling the ingress supports SNI.
-     */
-    tls: outputs.networking.v1beta1.IngressTLSPatch[];
-}
-/**
- * IngressStatus describe the current state of the Ingress.
- */
-export interface IngressStatus {
-    /**
-     * LoadBalancer contains the current status of the load-balancer.
-     */
-    loadBalancer: outputs.core.v1.LoadBalancerStatus;
-}
-/**
- * IngressStatus describe the current state of the Ingress.
- */
-export interface IngressStatusPatch {
-    /**
-     * LoadBalancer contains the current status of the load-balancer.
-     */
-    loadBalancer: outputs.core.v1.LoadBalancerStatusPatch;
-}
-/**
- * IngressTLS describes the transport layer security associated with an Ingress.
- */
-export interface IngressTLS {
-    /**
-     * Hosts are a list of hosts included in the TLS certificate. The values in this list must match the name/s used in the tlsSecret. Defaults to the wildcard host setting for the loadbalancer controller fulfilling this Ingress, if left unspecified.
-     */
-    hosts: string[];
-    /**
-     * SecretName is the name of the secret used to terminate SSL traffic on 443. Field is left optional to allow SSL routing based on SNI hostname alone. If the SNI host in a listener conflicts with the "Host" header field used by an IngressRule, the SNI host is used for termination and value of the Host header is used for routing.
-     */
-    secretName: string;
-}
-/**
- * IngressTLS describes the transport layer security associated with an Ingress.
- */
-export interface IngressTLSPatch {
-    /**
-     * Hosts are a list of hosts included in the TLS certificate. The values in this list must match the name/s used in the tlsSecret. Defaults to the wildcard host setting for the loadbalancer controller fulfilling this Ingress, if left unspecified.
-     */
-    hosts: string[];
-    /**
-     * SecretName is the name of the secret used to terminate SSL traffic on 443. Field is left optional to allow SSL routing based on SNI hostname alone. If the SNI host in a listener conflicts with the "Host" header field used by an IngressRule, the SNI host is used for termination and value of the Host header is used for routing.
-     */
-    secretName: string;
-}

package/types/networking/v1beta1/output.js

@@ -1,5 +0,0 @@
-"use strict";
-// *** WARNING: this file was generated by pulumigen. ***
-// *** Do not edit by hand unless you're certain you know what you are doing! ***
-Object.defineProperty(exports, "__esModule", { value: true });
-//# sourceMappingURL=output.js.map

package/types/networking/v1beta1/output.js.map

@@ -1 +0,0 @@
-{"version":3,"file":"output.js","sourceRoot":"","sources":["../../../../types/networking/v1beta1/output.ts"],"names":[],"mappings":";AAAA,yDAAyD;AACzD,iFAAiF"}

package/types/node/index.d.ts

@@ -1,3 +0,0 @@
-export * as v1 from "./v1/input";
-export * as v1alpha1 from "./v1alpha1/input";
-export * as v1beta1 from "./v1beta1/input";

package/types/node/index.js

@@ -1,9 +0,0 @@
-"use strict";
-// *** WARNING: this file was generated by pulumigen. ***
-// *** Do not edit by hand unless you're certain you know what you are doing! ***
-Object.defineProperty(exports, "__esModule", { value: true });
-exports.v1beta1 = exports.v1alpha1 = exports.v1 = void 0;
-exports.v1 = require("./v1/input");
-exports.v1alpha1 = require("./v1alpha1/input");
-exports.v1beta1 = require("./v1beta1/input");
-//# sourceMappingURL=index.js.map

package/types/node/index.js.map

@@ -1 +0,0 @@
-{"version":3,"file":"index.js","sourceRoot":"","sources":["../../../types/node/index.ts"],"names":[],"mappings":";AAAA,yDAAyD;AACzD,iFAAiF;;;AAEjF,mCAAiC;AACjC,+CAA6C;AAC7C,6CAA2C"}

package/types/node/input.d.ts

@@ -1,3 +0,0 @@
-export * as v1 from "./v1/input";
-export * as v1alpha1 from "./v1alpha1/input";
-export * as v1beta1 from "./v1beta1/input";

package/types/node/input.js

@@ -1,9 +0,0 @@
-"use strict";
-// *** WARNING: this file was generated by pulumigen. ***
-// *** Do not edit by hand unless you're certain you know what you are doing! ***
-Object.defineProperty(exports, "__esModule", { value: true });
-exports.v1beta1 = exports.v1alpha1 = exports.v1 = void 0;
-exports.v1 = require("./v1/input");
-exports.v1alpha1 = require("./v1alpha1/input");
-exports.v1beta1 = require("./v1beta1/input");
-//# sourceMappingURL=input.js.map

package/types/node/input.js.map

@@ -1 +0,0 @@
-{"version":3,"file":"input.js","sourceRoot":"","sources":["../../../types/node/input.ts"],"names":[],"mappings":";AAAA,yDAAyD;AACzD,iFAAiF;;;AAQjF,mCAAiC;AACjC,+CAA6C;AAC7C,6CAA2C"}

package/types/node/output.d.ts

@@ -1,3 +0,0 @@
-export * as v1 from "./v1/output";
-export * as v1alpha1 from "./v1alpha1/output";
-export * as v1beta1 from "./v1beta1/output";

package/types/node/output.js

@@ -1,9 +0,0 @@
-"use strict";
-// *** WARNING: this file was generated by pulumigen. ***
-// *** Do not edit by hand unless you're certain you know what you are doing! ***
-Object.defineProperty(exports, "__esModule", { value: true });
-exports.v1beta1 = exports.v1alpha1 = exports.v1 = void 0;
-exports.v1 = require("./v1/output");
-exports.v1alpha1 = require("./v1alpha1/output");
-exports.v1beta1 = require("./v1beta1/output");
-//# sourceMappingURL=output.js.map

package/types/node/output.js.map

@@ -1 +0,0 @@
-{"version":3,"file":"output.js","sourceRoot":"","sources":["../../../types/node/output.ts"],"names":[],"mappings":";AAAA,yDAAyD;AACzD,iFAAiF;;;AAQjF,oCAAkC;AAClC,gDAA8C;AAC9C,8CAA4C"}

package/types/node/v1/index.js

@@ -1,4 +0,0 @@
-"use strict";
-// *** WARNING: this file was generated by pulumigen. ***
-// *** Do not edit by hand unless you're certain you know what you are doing! ***
-//# sourceMappingURL=index.js.map

package/types/node/v1/index.js.map

@@ -1 +0,0 @@
-{"version":3,"file":"index.js","sourceRoot":"","sources":["../../../../types/node/v1/index.ts"],"names":[],"mappings":";AAAA,yDAAyD;AACzD,iFAAiF"}

package/types/node/v1/input.d.ts

@@ -1,84 +0,0 @@
-import * as pulumi from "@pulumi/pulumi";
-import * as inputs from "../../../types/input";
-/**
- * Overhead structure represents the resource overhead associated with running a pod.
- */
-export interface Overhead {
-    /**
-     * PodFixed represents the fixed resource overhead associated with running a pod.
-     */
-    podFixed?: pulumi.Input<{
-        [key: string]: pulumi.Input<string>;
-    }>;
-}
-/**
- * Overhead structure represents the resource overhead associated with running a pod.
- */
-export interface OverheadPatch {
-    /**
-     * PodFixed represents the fixed resource overhead associated with running a pod.
-     */
-    podFixed?: pulumi.Input<{
-        [key: string]: pulumi.Input<string>;
-    }>;
-}
-/**
- * RuntimeClass defines a class of container runtime supported in the cluster. The RuntimeClass is used to determine which container runtime is used to run all containers in a pod. RuntimeClasses are manually defined by a user or cluster provisioner, and referenced in the PodSpec. The Kubelet is responsible for resolving the RuntimeClassName reference before running the pod.  For more details, see https://kubernetes.io/docs/concepts/containers/runtime-class/
- */
-export interface RuntimeClass {
-    /**
-     * APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
-     */
-    apiVersion?: pulumi.Input<"node.k8s.io/v1">;
-    /**
-     * Handler specifies the underlying runtime and configuration that the CRI implementation will use to handle pods of this class. The possible values are specific to the node & CRI configuration.  It is assumed that all handlers are available on every node, and handlers of the same name are equivalent on every node. For example, a handler called "runc" might specify that the runc OCI runtime (using native Linux containers) will be used to run the containers in a pod. The Handler must be lowercase, conform to the DNS Label (RFC 1123) requirements, and is immutable.
-     */
-    handler: pulumi.Input<string>;
-    /**
-     * Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
-     */
-    kind?: pulumi.Input<"RuntimeClass">;
-    /**
-     * More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
-     */
-    metadata?: pulumi.Input<inputs.meta.v1.ObjectMeta>;
-    /**
-     * Overhead represents the resource overhead associated with running a pod for a given RuntimeClass. For more details, see
-     *  https://kubernetes.io/docs/concepts/scheduling-eviction/pod-overhead/
-     */
-    overhead?: pulumi.Input<inputs.node.v1.Overhead>;
-    /**
-     * Scheduling holds the scheduling constraints to ensure that pods running with this RuntimeClass are scheduled to nodes that support it. If scheduling is nil, this RuntimeClass is assumed to be supported by all nodes.
-     */
-    scheduling?: pulumi.Input<inputs.node.v1.Scheduling>;
-}
-/**
- * Scheduling specifies the scheduling constraints for nodes supporting a RuntimeClass.
- */
-export interface Scheduling {
-    /**
-     * nodeSelector lists labels that must be present on nodes that support this RuntimeClass. Pods using this RuntimeClass can only be scheduled to a node matched by this selector. The RuntimeClass nodeSelector is merged with a pod's existing nodeSelector. Any conflicts will cause the pod to be rejected in admission.
-     */
-    nodeSelector?: pulumi.Input<{
-        [key: string]: pulumi.Input<string>;
-    }>;
-    /**
-     * tolerations are appended (excluding duplicates) to pods running with this RuntimeClass during admission, effectively unioning the set of nodes tolerated by the pod and the RuntimeClass.
-     */
-    tolerations?: pulumi.Input<pulumi.Input<inputs.core.v1.Toleration>[]>;
-}
-/**
- * Scheduling specifies the scheduling constraints for nodes supporting a RuntimeClass.
- */
-export interface SchedulingPatch {
-    /**
-     * nodeSelector lists labels that must be present on nodes that support this RuntimeClass. Pods using this RuntimeClass can only be scheduled to a node matched by this selector. The RuntimeClass nodeSelector is merged with a pod's existing nodeSelector. Any conflicts will cause the pod to be rejected in admission.
-     */
-    nodeSelector?: pulumi.Input<{
-        [key: string]: pulumi.Input<string>;
-    }>;
-    /**
-     * tolerations are appended (excluding duplicates) to pods running with this RuntimeClass during admission, effectively unioning the set of nodes tolerated by the pod and the RuntimeClass.
-     */
-    tolerations?: pulumi.Input<pulumi.Input<inputs.core.v1.TolerationPatch>[]>;
-}

package/types/node/v1/input.js

@@ -1,5 +0,0 @@
-"use strict";
-// *** WARNING: this file was generated by pulumigen. ***
-// *** Do not edit by hand unless you're certain you know what you are doing! ***
-Object.defineProperty(exports, "__esModule", { value: true });
-//# sourceMappingURL=input.js.map

package/types/node/v1/input.js.map

@@ -1 +0,0 @@
-{"version":3,"file":"input.js","sourceRoot":"","sources":["../../../../types/node/v1/input.ts"],"names":[],"mappings":";AAAA,yDAAyD;AACzD,iFAAiF"}

package/types/node/v1/output.d.ts

@@ -1,83 +0,0 @@
-import * as outputs from "../../../types/output";
-/**
- * Overhead structure represents the resource overhead associated with running a pod.
- */
-export interface Overhead {
-    /**
-     * PodFixed represents the fixed resource overhead associated with running a pod.
-     */
-    podFixed: {
-        [key: string]: string;
-    };
-}
-/**
- * Overhead structure represents the resource overhead associated with running a pod.
- */
-export interface OverheadPatch {
-    /**
-     * PodFixed represents the fixed resource overhead associated with running a pod.
-     */
-    podFixed: {
-        [key: string]: string;
-    };
-}
-/**
- * RuntimeClass defines a class of container runtime supported in the cluster. The RuntimeClass is used to determine which container runtime is used to run all containers in a pod. RuntimeClasses are manually defined by a user or cluster provisioner, and referenced in the PodSpec. The Kubelet is responsible for resolving the RuntimeClassName reference before running the pod.  For more details, see https://kubernetes.io/docs/concepts/containers/runtime-class/
- */
-export interface RuntimeClass {
-    /**
-     * APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
-     */
-    apiVersion: "node.k8s.io/v1";
-    /**
-     * Handler specifies the underlying runtime and configuration that the CRI implementation will use to handle pods of this class. The possible values are specific to the node & CRI configuration.  It is assumed that all handlers are available on every node, and handlers of the same name are equivalent on every node. For example, a handler called "runc" might specify that the runc OCI runtime (using native Linux containers) will be used to run the containers in a pod. The Handler must be lowercase, conform to the DNS Label (RFC 1123) requirements, and is immutable.
-     */
-    handler: string;
-    /**
-     * Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
-     */
-    kind: "RuntimeClass";
-    /**
-     * More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
-     */
-    metadata: outputs.meta.v1.ObjectMeta;
-    /**
-     * Overhead represents the resource overhead associated with running a pod for a given RuntimeClass. For more details, see
-     *  https://kubernetes.io/docs/concepts/scheduling-eviction/pod-overhead/
-     */
-    overhead: outputs.node.v1.Overhead;
-    /**
-     * Scheduling holds the scheduling constraints to ensure that pods running with this RuntimeClass are scheduled to nodes that support it. If scheduling is nil, this RuntimeClass is assumed to be supported by all nodes.
-     */
-    scheduling: outputs.node.v1.Scheduling;
-}
-/**
- * Scheduling specifies the scheduling constraints for nodes supporting a RuntimeClass.
- */
-export interface Scheduling {
-    /**
-     * nodeSelector lists labels that must be present on nodes that support this RuntimeClass. Pods using this RuntimeClass can only be scheduled to a node matched by this selector. The RuntimeClass nodeSelector is merged with a pod's existing nodeSelector. Any conflicts will cause the pod to be rejected in admission.
-     */
-    nodeSelector: {
-        [key: string]: string;
-    };
-    /**
-     * tolerations are appended (excluding duplicates) to pods running with this RuntimeClass during admission, effectively unioning the set of nodes tolerated by the pod and the RuntimeClass.
-     */
-    tolerations: outputs.core.v1.Toleration[];
-}
-/**
- * Scheduling specifies the scheduling constraints for nodes supporting a RuntimeClass.
- */
-export interface SchedulingPatch {
-    /**
-     * nodeSelector lists labels that must be present on nodes that support this RuntimeClass. Pods using this RuntimeClass can only be scheduled to a node matched by this selector. The RuntimeClass nodeSelector is merged with a pod's existing nodeSelector. Any conflicts will cause the pod to be rejected in admission.
-     */
-    nodeSelector: {
-        [key: string]: string;
-    };
-    /**
-     * tolerations are appended (excluding duplicates) to pods running with this RuntimeClass during admission, effectively unioning the set of nodes tolerated by the pod and the RuntimeClass.
-     */
-    tolerations: outputs.core.v1.TolerationPatch[];
-}

package/types/node/v1/output.js

@@ -1,5 +0,0 @@
-"use strict";
-// *** WARNING: this file was generated by pulumigen. ***
-// *** Do not edit by hand unless you're certain you know what you are doing! ***
-Object.defineProperty(exports, "__esModule", { value: true });
-//# sourceMappingURL=output.js.map

package/types/node/v1/output.js.map

@@ -1 +0,0 @@
-{"version":3,"file":"output.js","sourceRoot":"","sources":["../../../../types/node/v1/output.ts"],"names":[],"mappings":";AAAA,yDAAyD;AACzD,iFAAiF"}

package/types/node/v1alpha1/index.js

@@ -1,4 +0,0 @@
-"use strict";
-// *** WARNING: this file was generated by pulumigen. ***
-// *** Do not edit by hand unless you're certain you know what you are doing! ***
-//# sourceMappingURL=index.js.map

package/types/node/v1alpha1/index.js.map

@@ -1 +0,0 @@
-{"version":3,"file":"index.js","sourceRoot":"","sources":["../../../../types/node/v1alpha1/index.ts"],"names":[],"mappings":";AAAA,yDAAyD;AACzD,iFAAiF"}