@pulumi/juniper-mist 0.0.17 → 0.0.18

package/types/input.d.ts

@@ -589,6 +589,9 @@ export declare namespace device {
         mac: pulumi.Input<string>;
     }
     interface GatewayDhcpdConfig {
+        /**
+         * Property key is the network name
+         */
         config?: pulumi.Input<{
             [key: string]: pulumi.Input<inputs.device.GatewayDhcpdConfigConfig>;
         }>;
@@ -920,7 +923,7 @@ export declare namespace device {
          */
         useMgmtVrf?: pulumi.Input<boolean>;
         /**
-         * for host-out traffic (NTP/TACPLUS/RADIUS/SYSLOG/SNMP), if alternative source network/ip is desired,
+         * for host-out traffic (NTP/TACPLUS/RADIUS/SYSLOG/SNMP), if alternative source network/ip is desired
          */
         useMgmtVrfForHostOut?: pulumi.Input<boolean>;
         vlanId?: pulumi.Input<string>;
@@ -989,11 +992,30 @@ export declare namespace device {
          */
         type?: pulumi.Input<string>;
         /**
-         * required when`type`==`tunnel`
+         * optional if `type`==`vpn`
          */
         wanName?: pulumi.Input<string>;
     }
     interface GatewayPortConfig {
+        /**
+         * if `aggregated`==`true`. To disable LCP support for the AE interface
+         */
+        aeDisableLacp?: pulumi.Input<boolean>;
+        /**
+         * if `aggregated`==`true`. Users could force to use the designated AE name (must be an integer between 0 and 127)
+         */
+        aeIdx?: pulumi.Input<string>;
+        /**
+         * For SRX Only, if `aggregated`==`true`.Sets the state of the interface as UP when the peer has limited LACP capability.\n
+         * Use case: When a device connected to this AE port is ZTPing for the first time, it will not have LACP configured on the other end\n
+         * Note: Turning this on will enable force-up on one of the interfaces in the bundle only
+         */
+        aeLacpForceUp?: pulumi.Input<boolean>;
+        aggregated?: pulumi.Input<boolean>;
+        /**
+         * if want to generate port up/down alarm, set it to true
+         */
+        critical?: pulumi.Input<boolean>;
         description?: pulumi.Input<string>;
         disableAutoneg?: pulumi.Input<boolean>;
         /**
@@ -1379,6 +1401,10 @@ export declare namespace device {
          * enum: `active-active`, `active-standby`
          */
         mode?: pulumi.Input<string>;
+        /**
+         * networks reachable via this tunnel
+         */
+        networks?: pulumi.Input<pulumi.Input<string>[]>;
         primary?: pulumi.Input<inputs.device.GatewayTunnelConfigsPrimary>;
         /**
          * Only if `provider`== `custom-ipsec`
@@ -1636,7 +1662,7 @@ export declare namespace device {
          * enum: `allow`, `deny`
          */
         action?: pulumi.Input<string>;
-        dstTag?: pulumi.Input<string>;
+        dstTag: pulumi.Input<string>;
     }
     interface SwitchAclTags {
         /**
@@ -1711,6 +1737,9 @@ export declare namespace device {
         networks?: pulumi.Input<pulumi.Input<string>[]>;
     }
     interface SwitchDhcpdConfig {
+        /**
+         * Property key is the network name
+         */
         config?: pulumi.Input<{
             [key: string]: pulumi.Input<inputs.device.SwitchDhcpdConfigConfig>;
         }>;
@@ -1914,7 +1943,7 @@ export declare namespace device {
          */
         useMgmtVrf?: pulumi.Input<boolean>;
         /**
-         * for host-out traffic (NTP/TACPLUS/RADIUS/SYSLOG/SNMP), if alternative source network/ip is desired,
+         * for host-out traffic (NTP/TACPLUS/RADIUS/SYSLOG/SNMP), if alternative source network/ip is desired
          */
         useMgmtVrfForHostOut?: pulumi.Input<boolean>;
     }
@@ -3319,6 +3348,9 @@ export declare namespace org {
         neighborAs?: pulumi.Input<number>;
     }
     interface DeviceprofileGatewayDhcpdConfig {
+        /**
+         * Property key is the network name
+         */
         config?: pulumi.Input<{
             [key: string]: pulumi.Input<inputs.org.DeviceprofileGatewayDhcpdConfigConfig>;
         }>;
@@ -3643,7 +3675,7 @@ export declare namespace org {
          */
         useMgmtVrf?: pulumi.Input<boolean>;
         /**
-         * for host-out traffic (NTP/TACPLUS/RADIUS/SYSLOG/SNMP), if alternative source network/ip is desired,
+         * for host-out traffic (NTP/TACPLUS/RADIUS/SYSLOG/SNMP), if alternative source network/ip is desired
          */
         useMgmtVrfForHostOut?: pulumi.Input<boolean>;
         vlanId?: pulumi.Input<string>;
@@ -3712,11 +3744,30 @@ export declare namespace org {
          */
         type?: pulumi.Input<string>;
         /**
-         * required when`type`==`tunnel`
+         * optional if `type`==`vpn`
          */
         wanName?: pulumi.Input<string>;
     }
     interface DeviceprofileGatewayPortConfig {
+        /**
+         * if `aggregated`==`true`. To disable LCP support for the AE interface
+         */
+        aeDisableLacp?: pulumi.Input<boolean>;
+        /**
+         * if `aggregated`==`true`. Users could force to use the designated AE name (must be an integer between 0 and 127)
+         */
+        aeIdx?: pulumi.Input<string>;
+        /**
+         * For SRX Only, if `aggregated`==`true`.Sets the state of the interface as UP when the peer has limited LACP capability.\n
+         * Use case: When a device connected to this AE port is ZTPing for the first time, it will not have LACP configured on the other end\n
+         * Note: Turning this on will enable force-up on one of the interfaces in the bundle only
+         */
+        aeLacpForceUp?: pulumi.Input<boolean>;
+        aggregated?: pulumi.Input<boolean>;
+        /**
+         * if want to generate port up/down alarm, set it to true
+         */
+        critical?: pulumi.Input<boolean>;
         description?: pulumi.Input<string>;
         disableAutoneg?: pulumi.Input<boolean>;
         /**
@@ -4092,6 +4143,10 @@ export declare namespace org {
          * enum: `active-active`, `active-standby`
          */
         mode?: pulumi.Input<string>;
+        /**
+         * networks reachable via this tunnel
+         */
+        networks?: pulumi.Input<pulumi.Input<string>[]>;
         primary?: pulumi.Input<inputs.org.DeviceprofileGatewayTunnelConfigsPrimary>;
         /**
          * Only if `provider`== `custom-ipsec`
@@ -4418,6 +4473,9 @@ export declare namespace org {
         neighborAs?: pulumi.Input<number>;
     }
     interface GatewaytemplateDhcpdConfig {
+        /**
+         * Property key is the network name
+         */
         config?: pulumi.Input<{
             [key: string]: pulumi.Input<inputs.org.GatewaytemplateDhcpdConfigConfig>;
         }>;
@@ -4742,7 +4800,7 @@ export declare namespace org {
          */
         useMgmtVrf?: pulumi.Input<boolean>;
         /**
-         * for host-out traffic (NTP/TACPLUS/RADIUS/SYSLOG/SNMP), if alternative source network/ip is desired,
+         * for host-out traffic (NTP/TACPLUS/RADIUS/SYSLOG/SNMP), if alternative source network/ip is desired
          */
         useMgmtVrfForHostOut?: pulumi.Input<boolean>;
         vlanId?: pulumi.Input<string>;
@@ -4811,11 +4869,30 @@ export declare namespace org {
          */
         type?: pulumi.Input<string>;
         /**
-         * required when`type`==`tunnel`
+         * optional if `type`==`vpn`
          */
         wanName?: pulumi.Input<string>;
     }
     interface GatewaytemplatePortConfig {
+        /**
+         * if `aggregated`==`true`. To disable LCP support for the AE interface
+         */
+        aeDisableLacp?: pulumi.Input<boolean>;
+        /**
+         * if `aggregated`==`true`. Users could force to use the designated AE name (must be an integer between 0 and 127)
+         */
+        aeIdx?: pulumi.Input<string>;
+        /**
+         * For SRX Only, if `aggregated`==`true`.Sets the state of the interface as UP when the peer has limited LACP capability.\n
+         * Use case: When a device connected to this AE port is ZTPing for the first time, it will not have LACP configured on the other end\n
+         * Note: Turning this on will enable force-up on one of the interfaces in the bundle only
+         */
+        aeLacpForceUp?: pulumi.Input<boolean>;
+        aggregated?: pulumi.Input<boolean>;
+        /**
+         * if want to generate port up/down alarm, set it to true
+         */
+        critical?: pulumi.Input<boolean>;
         description?: pulumi.Input<string>;
         disableAutoneg?: pulumi.Input<boolean>;
         /**
@@ -5191,6 +5268,10 @@ export declare namespace org {
          * enum: `active-active`, `active-standby`
          */
         mode?: pulumi.Input<string>;
+        /**
+         * networks reachable via this tunnel
+         */
+        networks?: pulumi.Input<pulumi.Input<string>[]>;
         primary?: pulumi.Input<inputs.org.GatewaytemplateTunnelConfigsPrimary>;
         /**
          * Only if `provider`== `custom-ipsec`
@@ -5660,7 +5741,7 @@ export declare namespace org {
          * enum: `allow`, `deny`
          */
         action?: pulumi.Input<string>;
-        dstTag?: pulumi.Input<string>;
+        dstTag: pulumi.Input<string>;
     }
     interface NetworktemplateAclTags {
         /**
@@ -6377,6 +6458,10 @@ export declare namespace org {
          * **Note**: no check is done
          */
         additionalConfigCmds?: pulumi.Input<pulumi.Input<string>[]>;
+        /**
+         * In-Band Management interface configuration
+         */
+        ipConfig?: pulumi.Input<inputs.org.NetworktemplateSwitchMatchingRuleIpConfig>;
         /**
          * role to match
          */
@@ -6387,6 +6472,10 @@ export declare namespace org {
         matchType?: pulumi.Input<string>;
         matchValue?: pulumi.Input<string>;
         name?: pulumi.Input<string>;
+        /**
+         * Out-of-Band Management interface configuration
+         */
+        oobIpConfig?: pulumi.Input<inputs.org.NetworktemplateSwitchMatchingRuleOobIpConfig>;
         /**
          * Propery key is the interface name or interface range
          */
@@ -6401,6 +6490,30 @@ export declare namespace org {
             [key: string]: pulumi.Input<inputs.org.NetworktemplateSwitchMatchingRulePortMirroring>;
         }>;
     }
+    interface NetworktemplateSwitchMatchingRuleIpConfig {
+        /**
+         * VLAN Name for the management interface
+         */
+        network?: pulumi.Input<string>;
+        /**
+         * enum: `dhcp`, `static`
+         */
+        type?: pulumi.Input<string>;
+    }
+    interface NetworktemplateSwitchMatchingRuleOobIpConfig {
+        /**
+         * enum: `dhcp`, `static`
+         */
+        type?: pulumi.Input<string>;
+        /**
+         * f supported on the platform. If enabled, DNS will be using this routing-instance, too
+         */
+        useMgmtVrf?: pulumi.Input<boolean>;
+        /**
+         * for host-out traffic (NTP/TACPLUS/RADIUS/SYSLOG/SNMP), if alternative source network/ip is desired
+         */
+        useMgmtVrfForHostOut?: pulumi.Input<boolean>;
+    }
     interface NetworktemplateSwitchMatchingRulePortConfig {
         /**
          * To disable LACP support for the AE interface
@@ -7949,6 +8062,10 @@ export declare namespace org {
         locales?: pulumi.Input<{
             [key: string]: pulumi.Input<inputs.org.WlanPortalTemplatePortalTemplateLocales>;
         }>;
+        /**
+         * path to the background image file. File must be a `png` image less than 100kB and image dimension must be less 500px x 200px (width x height).
+         */
+        logo?: pulumi.Input<string>;
         message?: pulumi.Input<string>;
         multiAuth?: pulumi.Input<boolean>;
         /**
@@ -8433,10 +8550,6 @@ export declare namespace org {
          * text of the Terms of Service
          */
         tosText?: pulumi.Input<string>;
-        /**
-         * label for Amazon auth button
-         */
-        uthButtonAmazon?: pulumi.Input<string>;
     }
     interface WlanQos {
         /**
@@ -8560,7 +8673,7 @@ export declare namespace site {
          * enum: `allow`, `deny`
          */
         action?: pulumi.Input<string>;
-        dstTag?: pulumi.Input<string>;
+        dstTag: pulumi.Input<string>;
     }
     interface NetworktemplateAclTags {
         /**
@@ -9277,6 +9390,10 @@ export declare namespace site {
          * **Note**: no check is done
          */
         additionalConfigCmds?: pulumi.Input<pulumi.Input<string>[]>;
+        /**
+         * In-Band Management interface configuration
+         */
+        ipConfig?: pulumi.Input<inputs.site.NetworktemplateSwitchMatchingRuleIpConfig>;
         /**
          * role to match
          */
@@ -9287,6 +9404,10 @@ export declare namespace site {
         matchType?: pulumi.Input<string>;
         matchValue?: pulumi.Input<string>;
         name?: pulumi.Input<string>;
+        /**
+         * Out-of-Band Management interface configuration
+         */
+        oobIpConfig?: pulumi.Input<inputs.site.NetworktemplateSwitchMatchingRuleOobIpConfig>;
         /**
          * Propery key is the interface name or interface range
          */
@@ -9301,6 +9422,30 @@ export declare namespace site {
             [key: string]: pulumi.Input<inputs.site.NetworktemplateSwitchMatchingRulePortMirroring>;
         }>;
     }
+    interface NetworktemplateSwitchMatchingRuleIpConfig {
+        /**
+         * VLAN Name for the management interface
+         */
+        network?: pulumi.Input<string>;
+        /**
+         * enum: `dhcp`, `static`
+         */
+        type?: pulumi.Input<string>;
+    }
+    interface NetworktemplateSwitchMatchingRuleOobIpConfig {
+        /**
+         * enum: `dhcp`, `static`
+         */
+        type?: pulumi.Input<string>;
+        /**
+         * f supported on the platform. If enabled, DNS will be using this routing-instance, too
+         */
+        useMgmtVrf?: pulumi.Input<boolean>;
+        /**
+         * for host-out traffic (NTP/TACPLUS/RADIUS/SYSLOG/SNMP), if alternative source network/ip is desired
+         */
+        useMgmtVrfForHostOut?: pulumi.Input<boolean>;
+    }
     interface NetworktemplateSwitchMatchingRulePortConfig {
         /**
          * To disable LACP support for the AE interface
@@ -10775,14 +10920,18 @@ export declare namespace site {
         field4required?: pulumi.Input<boolean>;
         /**
          * Can be used to localize the portal based on the User Agent. Allowed property key values are:
-         *       "ar", "ca-ES", "cs-CZ", "da-DK", "de-DE", "el-GR", "en-GB", "en-US", "es-ES",
-         *       "fi-FI", "fr-FR", "he-IL", "hi-IN", "hr-HR", "hu-HU", "id-ID", "it-IT", "ja-JP",
-         *       "ko-KR", "ms-MY", "nb-NO", "nl-NL", "pl-PL", "pt-BR", "pt-PT", "ro-RO", "ru-RU",
-         *       "sk-SK", "sv-SE", "th-TH", "tr-TR", "uk-UA", "vi-VN", "zh-Hans", "zh-Hant",
+         *   `ar`, `ca-ES`, `cs-CZ`, `da-DK`, `de-DE`, `el-GR`, `en-GB`, `en-US`, `es-ES`, `fi-FI`, `fr-FR`,
+         *   `he-IL`, `hi-IN`, `hr-HR`, `hu-HU`, `id-ID`, `it-IT`, `ja-J^`, `ko-KT`, `ms-MY`, `nb-NO`, `nl-NL`,
+         *   `pl-PL`, `pt-BR`, `pt-PT`, `ro-RO`, `ru-RU`, `sk-SK`, `sv-SE`, `th-TH`, `tr-TR`, `uk-UA`, `vi-VN`,
+         *   `zh-Hans`, `zh-Hant`
          */
         locales?: pulumi.Input<{
             [key: string]: pulumi.Input<inputs.site.WlanPortalTemplatePortalTemplateLocales>;
         }>;
+        /**
+         * path to the background image file. File must be a `png` image`
+         */
+        logo?: pulumi.Input<string>;
         message?: pulumi.Input<string>;
         multiAuth?: pulumi.Input<boolean>;
         /**
@@ -11267,10 +11416,6 @@ export declare namespace site {
          * text of the Terms of Service
          */
         tosText?: pulumi.Input<string>;
-        /**
-         * label for Amazon auth button
-         */
-        uthButtonAmazon?: pulumi.Input<string>;
     }
     interface WlanQos {
         /**