@pulumi/aws 7.8.0-alpha.1758123574 → 7.8.0-alpha.1759505861

package/types/input.d.ts

@@ -1326,6 +1326,10 @@ export interface ProviderEndpoint {
      * Use this to override the default service endpoint URL
      */
     wellarchitected?: pulumi.Input<string>;
+    /**
+     * Use this to override the default service endpoint URL
+     */
+    workmail?: pulumi.Input<string>;
     /**
      * Use this to override the default service endpoint URL
      */
@@ -2890,6 +2894,286 @@ export declare namespace apigatewayv2 {
     }
 }
 export declare namespace appautoscaling {
+    interface PolicyPredictiveScalingPolicyConfiguration {
+        /**
+         * The behavior that should be applied if the forecast capacity approaches or exceeds the maximum capacity. Valid values are `HonorMaxCapacity` and `IncreaseMaxCapacity`.
+         */
+        maxCapacityBreachBehavior?: pulumi.Input<string>;
+        /**
+         * Size of the capacity buffer to use when the forecast capacity is close to or exceeds the maximum capacity. The value is specified as a percentage relative to the forecast capacity. Required if the `maxCapacityBreachBehavior` argument is set to `IncreaseMaxCapacity`, and cannot be used otherwise.
+         */
+        maxCapacityBuffer?: pulumi.Input<number>;
+        /**
+         * Metrics and target utilization to use for predictive scaling. See supported fields below.
+         */
+        metricSpecifications: pulumi.Input<pulumi.Input<inputs.appautoscaling.PolicyPredictiveScalingPolicyConfigurationMetricSpecification>[]>;
+        /**
+         * Predictive scaling mode. Valid values are `ForecastOnly` and `ForecastAndScale`.
+         */
+        mode?: pulumi.Input<string>;
+        /**
+         * Amount of time, in seconds, that the start time can be advanced.
+         */
+        schedulingBufferTime?: pulumi.Input<number>;
+    }
+    interface PolicyPredictiveScalingPolicyConfigurationMetricSpecification {
+        /**
+         * Customized capacity metric specification. See supported fields below.
+         */
+        customizedCapacityMetricSpecification?: pulumi.Input<inputs.appautoscaling.PolicyPredictiveScalingPolicyConfigurationMetricSpecificationCustomizedCapacityMetricSpecification>;
+        /**
+         * Customized load metric specification. See supported fields below.
+         */
+        customizedLoadMetricSpecification?: pulumi.Input<inputs.appautoscaling.PolicyPredictiveScalingPolicyConfigurationMetricSpecificationCustomizedLoadMetricSpecification>;
+        /**
+         * Customized scaling metric specification. See supported fields below.
+         */
+        customizedScalingMetricSpecification?: pulumi.Input<inputs.appautoscaling.PolicyPredictiveScalingPolicyConfigurationMetricSpecificationCustomizedScalingMetricSpecification>;
+        /**
+         * Predefined load metric specification. See supported fields below.
+         */
+        predefinedLoadMetricSpecification?: pulumi.Input<inputs.appautoscaling.PolicyPredictiveScalingPolicyConfigurationMetricSpecificationPredefinedLoadMetricSpecification>;
+        /**
+         * Predefined metric pair specification that determines the appropriate scaling metric and load metric to use. See supported fields below.
+         */
+        predefinedMetricPairSpecification?: pulumi.Input<inputs.appautoscaling.PolicyPredictiveScalingPolicyConfigurationMetricSpecificationPredefinedMetricPairSpecification>;
+        /**
+         * Predefined scaling metric specification. See supported fields below.
+         */
+        predefinedScalingMetricSpecification?: pulumi.Input<inputs.appautoscaling.PolicyPredictiveScalingPolicyConfigurationMetricSpecificationPredefinedScalingMetricSpecification>;
+        /**
+         * Target utilization.
+         */
+        targetValue: pulumi.Input<string>;
+    }
+    interface PolicyPredictiveScalingPolicyConfigurationMetricSpecificationCustomizedCapacityMetricSpecification {
+        /**
+         * One or more metric data queries to provide data points for a metric specification. See supported fields below.
+         */
+        metricDataQueries: pulumi.Input<pulumi.Input<inputs.appautoscaling.PolicyPredictiveScalingPolicyConfigurationMetricSpecificationCustomizedCapacityMetricSpecificationMetricDataQuery>[]>;
+    }
+    interface PolicyPredictiveScalingPolicyConfigurationMetricSpecificationCustomizedCapacityMetricSpecificationMetricDataQuery {
+        /**
+         * Math expression to perform on the returned data, if this object is performing a math expression.
+         */
+        expression?: pulumi.Input<string>;
+        /**
+         * Short name that identifies the object's results in the response.
+         */
+        id: pulumi.Input<string>;
+        /**
+         * Human-readable label for this metric or expression.
+         */
+        label?: pulumi.Input<string>;
+        /**
+         * Information about the metric data to return. See supported fields below.
+         */
+        metricStat?: pulumi.Input<inputs.appautoscaling.PolicyPredictiveScalingPolicyConfigurationMetricSpecificationCustomizedCapacityMetricSpecificationMetricDataQueryMetricStat>;
+        /**
+         * Whether to return the timestamps and raw data values of this metric.
+         */
+        returnData?: pulumi.Input<boolean>;
+    }
+    interface PolicyPredictiveScalingPolicyConfigurationMetricSpecificationCustomizedCapacityMetricSpecificationMetricDataQueryMetricStat {
+        /**
+         * Structure that defines the CloudWatch metric to return, including the metric name, namespace, and dimensions.
+         */
+        metric: pulumi.Input<inputs.appautoscaling.PolicyPredictiveScalingPolicyConfigurationMetricSpecificationCustomizedCapacityMetricSpecificationMetricDataQueryMetricStatMetric>;
+        /**
+         * Statistic of the metrics to return.
+         */
+        stat: pulumi.Input<string>;
+        /**
+         * Unit of the metrics to return.
+         */
+        unit?: pulumi.Input<string>;
+    }
+    interface PolicyPredictiveScalingPolicyConfigurationMetricSpecificationCustomizedCapacityMetricSpecificationMetricDataQueryMetricStatMetric {
+        /**
+         * Dimensions of the metric. See supported fields below.
+         */
+        dimensions?: pulumi.Input<pulumi.Input<inputs.appautoscaling.PolicyPredictiveScalingPolicyConfigurationMetricSpecificationCustomizedCapacityMetricSpecificationMetricDataQueryMetricStatMetricDimension>[]>;
+        /**
+         * Name of the metric.
+         */
+        metricName?: pulumi.Input<string>;
+        /**
+         * Namespace of the metric.
+         */
+        namespace?: pulumi.Input<string>;
+    }
+    interface PolicyPredictiveScalingPolicyConfigurationMetricSpecificationCustomizedCapacityMetricSpecificationMetricDataQueryMetricStatMetricDimension {
+        /**
+         * Name of the dimension.
+         */
+        name: pulumi.Input<string>;
+        /**
+         * Value of the dimension.
+         */
+        value: pulumi.Input<string>;
+    }
+    interface PolicyPredictiveScalingPolicyConfigurationMetricSpecificationCustomizedLoadMetricSpecification {
+        /**
+         * One or more metric data queries to provide data points for a metric specification. See supported fields below.
+         */
+        metricDataQueries: pulumi.Input<pulumi.Input<inputs.appautoscaling.PolicyPredictiveScalingPolicyConfigurationMetricSpecificationCustomizedLoadMetricSpecificationMetricDataQuery>[]>;
+    }
+    interface PolicyPredictiveScalingPolicyConfigurationMetricSpecificationCustomizedLoadMetricSpecificationMetricDataQuery {
+        /**
+         * Math expression to perform on the returned data, if this object is performing a math expression.
+         */
+        expression?: pulumi.Input<string>;
+        /**
+         * Short name that identifies the object's results in the response.
+         */
+        id: pulumi.Input<string>;
+        /**
+         * Human-readable label for this metric or expression.
+         */
+        label?: pulumi.Input<string>;
+        /**
+         * Information about the metric data to return. See supported fields below.
+         */
+        metricStat?: pulumi.Input<inputs.appautoscaling.PolicyPredictiveScalingPolicyConfigurationMetricSpecificationCustomizedLoadMetricSpecificationMetricDataQueryMetricStat>;
+        /**
+         * Whether to return the timestamps and raw data values of this metric.
+         */
+        returnData?: pulumi.Input<boolean>;
+    }
+    interface PolicyPredictiveScalingPolicyConfigurationMetricSpecificationCustomizedLoadMetricSpecificationMetricDataQueryMetricStat {
+        /**
+         * Structure that defines the CloudWatch metric to return, including the metric name, namespace, and dimensions.
+         */
+        metric: pulumi.Input<inputs.appautoscaling.PolicyPredictiveScalingPolicyConfigurationMetricSpecificationCustomizedLoadMetricSpecificationMetricDataQueryMetricStatMetric>;
+        /**
+         * Statistic of the metrics to return.
+         */
+        stat: pulumi.Input<string>;
+        /**
+         * Unit of the metrics to return.
+         */
+        unit?: pulumi.Input<string>;
+    }
+    interface PolicyPredictiveScalingPolicyConfigurationMetricSpecificationCustomizedLoadMetricSpecificationMetricDataQueryMetricStatMetric {
+        /**
+         * Dimensions of the metric. See supported fields below.
+         */
+        dimensions?: pulumi.Input<pulumi.Input<inputs.appautoscaling.PolicyPredictiveScalingPolicyConfigurationMetricSpecificationCustomizedLoadMetricSpecificationMetricDataQueryMetricStatMetricDimension>[]>;
+        /**
+         * Name of the metric.
+         */
+        metricName?: pulumi.Input<string>;
+        /**
+         * Namespace of the metric.
+         */
+        namespace?: pulumi.Input<string>;
+    }
+    interface PolicyPredictiveScalingPolicyConfigurationMetricSpecificationCustomizedLoadMetricSpecificationMetricDataQueryMetricStatMetricDimension {
+        /**
+         * Name of the dimension.
+         */
+        name: pulumi.Input<string>;
+        /**
+         * Value of the dimension.
+         */
+        value: pulumi.Input<string>;
+    }
+    interface PolicyPredictiveScalingPolicyConfigurationMetricSpecificationCustomizedScalingMetricSpecification {
+        /**
+         * One or more metric data queries to provide data points for a metric specification. See supported fields below.
+         */
+        metricDataQueries: pulumi.Input<pulumi.Input<inputs.appautoscaling.PolicyPredictiveScalingPolicyConfigurationMetricSpecificationCustomizedScalingMetricSpecificationMetricDataQuery>[]>;
+    }
+    interface PolicyPredictiveScalingPolicyConfigurationMetricSpecificationCustomizedScalingMetricSpecificationMetricDataQuery {
+        /**
+         * Math expression to perform on the returned data, if this object is performing a math expression.
+         */
+        expression?: pulumi.Input<string>;
+        /**
+         * Short name that identifies the object's results in the response.
+         */
+        id: pulumi.Input<string>;
+        /**
+         * Human-readable label for this metric or expression.
+         */
+        label?: pulumi.Input<string>;
+        /**
+         * Information about the metric data to return. See supported fields below.
+         */
+        metricStat?: pulumi.Input<inputs.appautoscaling.PolicyPredictiveScalingPolicyConfigurationMetricSpecificationCustomizedScalingMetricSpecificationMetricDataQueryMetricStat>;
+        /**
+         * Whether to return the timestamps and raw data values of this metric.
+         */
+        returnData?: pulumi.Input<boolean>;
+    }
+    interface PolicyPredictiveScalingPolicyConfigurationMetricSpecificationCustomizedScalingMetricSpecificationMetricDataQueryMetricStat {
+        /**
+         * Structure that defines the CloudWatch metric to return, including the metric name, namespace, and dimensions.
+         */
+        metric: pulumi.Input<inputs.appautoscaling.PolicyPredictiveScalingPolicyConfigurationMetricSpecificationCustomizedScalingMetricSpecificationMetricDataQueryMetricStatMetric>;
+        /**
+         * Statistic of the metrics to return.
+         */
+        stat: pulumi.Input<string>;
+        /**
+         * Unit of the metrics to return.
+         */
+        unit?: pulumi.Input<string>;
+    }
+    interface PolicyPredictiveScalingPolicyConfigurationMetricSpecificationCustomizedScalingMetricSpecificationMetricDataQueryMetricStatMetric {
+        /**
+         * Dimensions of the metric. See supported fields below.
+         */
+        dimensions?: pulumi.Input<pulumi.Input<inputs.appautoscaling.PolicyPredictiveScalingPolicyConfigurationMetricSpecificationCustomizedScalingMetricSpecificationMetricDataQueryMetricStatMetricDimension>[]>;
+        /**
+         * Name of the metric.
+         */
+        metricName?: pulumi.Input<string>;
+        /**
+         * Namespace of the metric.
+         */
+        namespace?: pulumi.Input<string>;
+    }
+    interface PolicyPredictiveScalingPolicyConfigurationMetricSpecificationCustomizedScalingMetricSpecificationMetricDataQueryMetricStatMetricDimension {
+        /**
+         * Name of the dimension.
+         */
+        name: pulumi.Input<string>;
+        /**
+         * Value of the dimension.
+         */
+        value: pulumi.Input<string>;
+    }
+    interface PolicyPredictiveScalingPolicyConfigurationMetricSpecificationPredefinedLoadMetricSpecification {
+        /**
+         * Metric type.
+         */
+        predefinedMetricType: pulumi.Input<string>;
+        /**
+         * Label that uniquely identifies a target group.
+         */
+        resourceLabel?: pulumi.Input<string>;
+    }
+    interface PolicyPredictiveScalingPolicyConfigurationMetricSpecificationPredefinedMetricPairSpecification {
+        /**
+         * Which metrics to use. There are two different types of metrics for each metric type: one is a load metric and one is a scaling metric.
+         */
+        predefinedMetricType: pulumi.Input<string>;
+        /**
+         * Label that uniquely identifies a specific target group from which to determine the total and average request count.
+         */
+        resourceLabel?: pulumi.Input<string>;
+    }
+    interface PolicyPredictiveScalingPolicyConfigurationMetricSpecificationPredefinedScalingMetricSpecification {
+        /**
+         * Metric type.
+         */
+        predefinedMetricType: pulumi.Input<string>;
+        /**
+         * Label that uniquely identifies a specific target group from which to determine the average request count.
+         */
+        resourceLabel?: pulumi.Input<string>;
+    }
     interface PolicyStepScalingPolicyConfiguration {
         /**
          * Whether the adjustment is an absolute number or a percentage of the current capacity. Valid values are `ChangeInCapacity`, `ExactCapacity`, and `PercentChangeInCapacity`.
@@ -7227,7 +7511,7 @@ export declare namespace appsync {
     }
     interface ApiEventConfigAuthProvider {
         /**
-         * Type of authentication provider. Valid values: `AMAZON_COGNITO_USER_POOLS`, `AWS_LAMBDA`, `OPENID_CONNECT`, `API_KEY`.
+         * Type of authentication provider. Valid values: `API_KEY`, `AWS_IAM`, `AMAZON_COGNITO_USER_POOLS`, `OPENID_CONNECT`, `AWS_LAMBDA`.
          */
         authType: pulumi.Input<string>;
         /**
@@ -8124,7 +8408,7 @@ export declare namespace autoscaling {
          */
         scaleInProtectedInstances?: pulumi.Input<string>;
         /**
-         * Replace instances that already have your desired configuration. Defaults to `false`.
+         * Skip replacing instances that already have your desired configuration. Defaults to `false`.
          */
         skipMatching?: pulumi.Input<boolean>;
         /**
@@ -11934,12 +12218,44 @@ export declare namespace bedrock {
         wordsConfigs?: pulumi.Input<pulumi.Input<inputs.bedrock.GuardrailWordPolicyConfigWordsConfig>[]>;
     }
     interface GuardrailWordPolicyConfigManagedWordListsConfig {
+        /**
+         * Action to take when harmful content is detected in the input. Valid values: `BLOCK`, `NONE`.
+         */
+        inputAction?: pulumi.Input<string>;
+        /**
+         * Whether to enable guardrail evaluation on the input. When disabled, you aren't charged for the evaluation.
+         */
+        inputEnabled?: pulumi.Input<boolean>;
+        /**
+         * Action to take when harmful content is detected in the output. Valid values: `BLOCK`, `NONE`.
+         */
+        outputAction?: pulumi.Input<string>;
+        /**
+         * Whether to enable guardrail evaluation on the output. When disabled, you aren't charged for the evaluation.
+         */
+        outputEnabled?: pulumi.Input<boolean>;
         /**
          * Options for managed words.
          */
         type: pulumi.Input<string>;
     }
     interface GuardrailWordPolicyConfigWordsConfig {
+        /**
+         * Action to take when harmful content is detected in the input. Valid values: `BLOCK`, `NONE`.
+         */
+        inputAction?: pulumi.Input<string>;
+        /**
+         * Whether to enable guardrail evaluation on the input. When disabled, you aren't charged for the evaluation.
+         */
+        inputEnabled?: pulumi.Input<boolean>;
+        /**
+         * Action to take when harmful content is detected in the output. Valid values: `BLOCK`, `NONE`.
+         */
+        outputAction?: pulumi.Input<string>;
+        /**
+         * Whether to enable guardrail evaluation on the output. When disabled, you aren't charged for the evaluation.
+         */
+        outputEnabled?: pulumi.Input<boolean>;
         /**
          * The custom word text.
          */
@@ -12042,6 +12358,8 @@ export declare namespace bedrockmodel {
         keyPrefix?: pulumi.Input<string>;
     }
 }
+export declare namespace billing {
+}
 export declare namespace budgets {
     interface BudgetActionActionThreshold {
         /**
@@ -13564,6 +13882,10 @@ export declare namespace cloudfront {
          * CloudFront Origin Shield configuration information. Using Origin Shield can help reduce the load on your origin. For more information, see [Using Origin Shield](https://docs.aws.amazon.com/AmazonCloudFront/latest/DeveloperGuide/origin-shield.html) in the Amazon CloudFront Developer Guide.
          */
         originShield?: pulumi.Input<inputs.cloudfront.DistributionOriginOriginShield>;
+        /**
+         * Time (in seconds) that a request from CloudFront to the origin can stay open and wait for a response. Must be integer greater than or equal to the value of `originReadTimeout`. If omitted or explicitly set to `0`, no maximum value is enforced.
+         */
+        responseCompletionTimeout?: pulumi.Input<number>;
         /**
          * CloudFront S3 origin configuration information. If a custom origin is required, use `customOriginConfig` instead.
          */
@@ -15782,7 +16104,7 @@ export declare namespace codebuild {
     }
     interface WebhookFilterGroup {
         /**
-         * A webhook filter for the group. Filter blocks are documented below.
+         * A webhook filter for the group. See filter for details.
          */
         filters?: pulumi.Input<pulumi.Input<inputs.codebuild.WebhookFilterGroupFilter>[]>;
     }
@@ -15800,6 +16122,16 @@ export declare namespace codebuild {
          */
         type: pulumi.Input<string>;
     }
+    interface WebhookPullRequestBuildPolicy {
+        /**
+         * List of repository roles that have approval privileges for pull request builds when comment approval is required. This argument must be specified only when `requiresCommentApproval` is not `DISABLED`. See the [AWS documentation](https://docs.aws.amazon.com/codebuild/latest/userguide/pull-request-build-policy.html#pull-request-build-policy.configuration) for valid values and defaults.
+         */
+        approverRoles?: pulumi.Input<pulumi.Input<string>[]>;
+        /**
+         * Specifies when comment-based approval is required before triggering a build on pull requests. Valid values are: `DISABLED`, `ALL_PULL_REQUESTS`, and `FORK_PULL_REQUESTS`.
+         */
+        requiresCommentApproval: pulumi.Input<string>;
+    }
     interface WebhookScopeConfiguration {
         /**
          * The domain of the GitHub Enterprise organization. Required if your project's source type is GITHUB_ENTERPRISE.
@@ -17066,6 +17398,25 @@ export declare namespace cognito {
          */
         bucketArn?: pulumi.Input<string>;
     }
+    interface ManagedLoginBrandingAsset {
+        /**
+         * Image file, in Base64-encoded binary.
+         */
+        bytes?: pulumi.Input<string>;
+        /**
+         * Category that the image corresponds to. See [AWS documentation](https://docs.aws.amazon.com/cognito-user-identity-pools/latest/APIReference/API_AssetType.html#CognitoUserPools-Type-AssetType-Category) for valid values.
+         */
+        category: pulumi.Input<string>;
+        /**
+         * Display-mode target of the asset. Valid values: `LIGHT`, `DARK`, `DYNAMIC`.
+         */
+        colorMode: pulumi.Input<string>;
+        extension: pulumi.Input<string>;
+        /**
+         * Asset ID.
+         */
+        resourceId?: pulumi.Input<string>;
+    }
     interface ManagedUserPoolClientAnalyticsConfiguration {
         /**
          * Application ARN for an Amazon Pinpoint application. It conflicts with `externalId` and `roleArn`.
@@ -18372,6 +18723,30 @@ export declare namespace connect {
     }
 }
 export declare namespace controltower {
+    interface BaselineParameters {
+        /**
+         * The key of the parameter.
+         */
+        key: pulumi.Input<string>;
+        /**
+         * The value of the parameter.
+         */
+        value: pulumi.Input<string>;
+    }
+    interface BaselineTimeouts {
+        /**
+         * A string that can be [parsed as a duration](https://pkg.go.dev/time#ParseDuration) consisting of numbers and unit suffixes, such as "30s" or "2h45m". Valid time units are "s" (seconds), "m" (minutes), "h" (hours).
+         */
+        create?: pulumi.Input<string>;
+        /**
+         * A string that can be [parsed as a duration](https://pkg.go.dev/time#ParseDuration) consisting of numbers and unit suffixes, such as "30s" or "2h45m". Valid time units are "s" (seconds), "m" (minutes), "h" (hours). Setting a timeout for a Delete operation is only applicable if changes are saved into state before the destroy operation occurs.
+         */
+        delete?: pulumi.Input<string>;
+        /**
+         * A string that can be [parsed as a duration](https://pkg.go.dev/time#ParseDuration) consisting of numbers and unit suffixes, such as "30s" or "2h45m". Valid time units are "s" (seconds), "m" (minutes), "h" (hours).
+         */
+        update?: pulumi.Input<string>;
+    }
     interface ControlTowerControlParameter {
         /**
          * The name of the parameter.
@@ -21942,7 +22317,7 @@ export declare namespace dynamodb {
          */
         nonKeyAttributes?: pulumi.Input<pulumi.Input<string>[]>;
         /**
-         * Sets the maximum number of read and write units for the specified on-demand table. See below.
+         * Sets the maximum number of read and write units for the specified on-demand index. See below.
          */
         onDemandThroughput?: pulumi.Input<inputs.dynamodb.TableGlobalSecondaryIndexOnDemandThroughput>;
         /**
@@ -21957,6 +22332,10 @@ export declare namespace dynamodb {
          * Number of read units for this index. Must be set if billingMode is set to PROVISIONED.
          */
         readCapacity?: pulumi.Input<number>;
+        /**
+         * Sets the number of warm read and write units for this index. See below.
+         */
+        warmThroughput?: pulumi.Input<inputs.dynamodb.TableGlobalSecondaryIndexWarmThroughput>;
         /**
          * Number of write units for this index. Must be set if billingMode is set to PROVISIONED.
          */
@@ -21972,6 +22351,16 @@ export declare namespace dynamodb {
          */
         maxWriteRequestUnits?: pulumi.Input<number>;
     }
+    interface TableGlobalSecondaryIndexWarmThroughput {
+        /**
+         * Number of read operations a table or index can instantaneously support. For the base table, decreasing this value will force a new resource. For a global secondary index, this value can be increased or decreased without recreation. Minimum value of `12000` (default).
+         */
+        readUnitsPerSecond?: pulumi.Input<number>;
+        /**
+         * Number of write operations a table or index can instantaneously support. For the base table, decreasing this value will force a new resource. For a global secondary index, this value can be increased or decreased without recreation. Minimum value of `4000` (default).
+         */
+        writeUnitsPerSecond?: pulumi.Input<number>;
+    }
     interface TableImportTable {
         /**
          * Type of compression to be used on the input coming from the imported table.
@@ -22131,6 +22520,16 @@ export declare namespace dynamodb {
          */
         enabled?: pulumi.Input<boolean>;
     }
+    interface TableWarmThroughput {
+        /**
+         * Number of read operations a table or index can instantaneously support. For the base table, decreasing this value will force a new resource. For a global secondary index, this value can be increased or decreased without recreation. Minimum value of `12000` (default).
+         */
+        readUnitsPerSecond?: pulumi.Input<number>;
+        /**
+         * Number of write operations a table or index can instantaneously support. For the base table, decreasing this value will force a new resource. For a global secondary index, this value can be increased or decreased without recreation. Minimum value of `4000` (default).
+         */
+        writeUnitsPerSecond?: pulumi.Input<number>;
+    }
 }
 export declare namespace ebs {
     interface FastSnapshotRestoreTimeouts {
@@ -23201,11 +23600,25 @@ export declare namespace ec2 {
         values: pulumi.Input<pulumi.Input<string>[]>;
     }
     interface GetInstanceFilter {
+        /**
+         * Name of the filter.
+         * For a full reference of filter names, see [describe-instances in the AWS CLI reference][1].
+         */
         name: string;
+        /**
+         * One or more values to match.
+         */
         values: string[];
     }
     interface GetInstanceFilterArgs {
+        /**
+         * Name of the filter.
+         * For a full reference of filter names, see [describe-instances in the AWS CLI reference][1].
+         */
         name: pulumi.Input<string>;
+        /**
+         * One or more values to match.
+         */
         values: pulumi.Input<pulumi.Input<string>[]>;
     }
     interface GetInstanceTypeOfferingFilter {
@@ -23269,11 +23682,25 @@ export declare namespace ec2 {
         values: pulumi.Input<pulumi.Input<string>[]>;
     }
     interface GetInstancesFilter {
+        /**
+         * Name of the filter.
+         * For a full reference of filter names, see [describe-instances in the AWS CLI reference][1].
+         */
         name: string;
+        /**
+         * One or more values to match.
+         */
         values: string[];
     }
     interface GetInstancesFilterArgs {
+        /**
+         * Name of the filter.
+         * For a full reference of filter names, see [describe-instances in the AWS CLI reference][1].
+         */
         name: pulumi.Input<string>;
+        /**
+         * One or more values to match.
+         */
         values: pulumi.Input<pulumi.Input<string>[]>;
     }
     interface GetInternetGatewayFilter {
@@ -25074,7 +25501,11 @@ export declare namespace ec2 {
          */
         availabilityZone?: pulumi.Input<string>;
         /**
-         * The name of the placement group for the instance.
+         * The ID of the placement group for the instance. Conflicts with `groupName`.
+         */
+        groupId?: pulumi.Input<string>;
+        /**
+         * The name of the placement group for the instance. Conflicts with `groupId`.
          */
         groupName?: pulumi.Input<string>;
         /**
@@ -28298,6 +28729,10 @@ export declare namespace ecs {
         strategy?: pulumi.Input<string>;
     }
     interface ServiceDeploymentConfigurationLifecycleHook {
+        /**
+         * Custom parameters that Amazon ECS will pass to the hook target invocations (such as a Lambda function).
+         */
+        hookDetails?: pulumi.Input<string>;
         /**
          * ARN of the Lambda function to invoke for the lifecycle hook.
          */
@@ -32937,6 +33372,10 @@ export declare namespace glue {
          * The number of days that orphan files should be retained before file deletion. Defaults to `3`.
          */
         orphanFileRetentionPeriodInDays?: pulumi.Input<number>;
+        /**
+         * interval in hours between orphan file deletion job runs. Defaults to `24`.
+         */
+        runRateInHours?: pulumi.Input<number>;
     }
     interface CatalogTableOptimizerConfigurationRetentionConfiguration {
         /**
@@ -32953,6 +33392,10 @@ export declare namespace glue {
          * The number of Iceberg snapshots to retain within the retention period. Defaults to `1` or the corresponding Iceberg table configuration field if it exists.
          */
         numberOfSnapshotsToRetain?: pulumi.Input<number>;
+        /**
+         * Interval in hours between retention job runs. Defaults to `24`.
+         */
+        runRateInHours?: pulumi.Input<number>;
         /**
          * The number of days to retain the Iceberg snapshots. Defaults to `5`, or the corresponding Iceberg table configuration field if it exists.
          */
@@ -59491,7 +59934,7 @@ export declare namespace networkfirewall {
     }
     interface RuleGroupRuleGroupRulesSourceStatelessRulesAndCustomActionsStatelessRuleRuleDefinitionMatchAttributesDestination {
         /**
-         * An IP address or a block of IP addresses in CIDR notation. AWS Network Firewall supports all address ranges for IPv4.
+         * An IP address or a block of IP addresses in CIDR notation. AWS Network Firewall supports all address ranges for IPv4 and IPv6.
          */
         addressDefinition: pulumi.Input<string>;
     }
@@ -59507,7 +59950,7 @@ export declare namespace networkfirewall {
     }
     interface RuleGroupRuleGroupRulesSourceStatelessRulesAndCustomActionsStatelessRuleRuleDefinitionMatchAttributesSource {
         /**
-         * An IP address or a block of IP addresses in CIDR notation. AWS Network Firewall supports all address ranges for IPv4.
+         * An IP address or a block of IP addresses in CIDR notation. AWS Network Firewall supports all address ranges for IPv4 and IPv6.
          */
         addressDefinition: pulumi.Input<string>;
     }
@@ -60310,10 +60753,18 @@ export declare namespace networkmanager {
          * Whether to enable appliance mode support. If enabled, traffic flow between a source and destination use the same Availability Zone for the VPC attachment for the lifetime of that flow. If the VPC attachment is pending acceptance, changing this value will recreate the resource.
          */
         applianceModeSupport?: pulumi.Input<boolean>;
+        /**
+         * Whether to enable DNS support. If the VPC attachment is pending acceptance, changing this value will recreate the resource.
+         */
+        dnsSupport?: pulumi.Input<boolean>;
         /**
          * Whether to enable IPv6 support. If the VPC attachment is pending acceptance, changing this value will recreate the resource.
          */
         ipv6Support?: pulumi.Input<boolean>;
+        /**
+         * Whether to enable security group referencing support for this VPC attachment. The default is `true`. However, at the core network policy-level the default is set to `false`. If the VPC attachment is pending acceptance, changing this value will recreate the resource.
+         */
+        securityGroupReferencingSupport?: pulumi.Input<boolean>;
     }
 }
 export declare namespace notifications {
@@ -60352,6 +60803,224 @@ export declare namespace oam {
         filter: pulumi.Input<string>;
     }
 }
+export declare namespace odb {
+    interface CloudAutonomousVmClusterMaintenanceWindow {
+        /**
+         * The days of the week when maintenance can be performed.
+         */
+        daysOfWeeks?: pulumi.Input<pulumi.Input<inputs.odb.CloudAutonomousVmClusterMaintenanceWindowDaysOfWeek>[]>;
+        /**
+         * The hours of the day when maintenance can be performed.
+         */
+        hoursOfDays?: pulumi.Input<pulumi.Input<number>[]>;
+        /**
+         * The lead time in weeks before the maintenance window.
+         */
+        leadTimeInWeeks?: pulumi.Input<number>;
+        /**
+         * The months when maintenance can be performed.
+         */
+        months?: pulumi.Input<pulumi.Input<inputs.odb.CloudAutonomousVmClusterMaintenanceWindowMonth>[]>;
+        /**
+         * The preference for the maintenance window scheduling.
+         */
+        preference: pulumi.Input<string>;
+        /**
+         * Indicates whether to skip release updates during maintenance.
+         */
+        weeksOfMonths?: pulumi.Input<pulumi.Input<number>[]>;
+    }
+    interface CloudAutonomousVmClusterMaintenanceWindowDaysOfWeek {
+        name: pulumi.Input<string>;
+    }
+    interface CloudAutonomousVmClusterMaintenanceWindowMonth {
+        name: pulumi.Input<string>;
+    }
+    interface CloudAutonomousVmClusterTimeouts {
+        /**
+         * A string that can be [parsed as a duration](https://pkg.go.dev/time#ParseDuration) consisting of numbers and unit suffixes, such as "30s" or "2h45m". Valid time units are "s" (seconds), "m" (minutes), "h" (hours).
+         */
+        create?: pulumi.Input<string>;
+        /**
+         * A string that can be [parsed as a duration](https://pkg.go.dev/time#ParseDuration) consisting of numbers and unit suffixes, such as "30s" or "2h45m". Valid time units are "s" (seconds), "m" (minutes), "h" (hours). Setting a timeout for a Delete operation is only applicable if changes are saved into state before the destroy operation occurs.
+         */
+        delete?: pulumi.Input<string>;
+        /**
+         * A string that can be [parsed as a duration](https://pkg.go.dev/time#ParseDuration) consisting of numbers and unit suffixes, such as "30s" or "2h45m". Valid time units are "s" (seconds), "m" (minutes), "h" (hours).
+         */
+        update?: pulumi.Input<string>;
+    }
+    interface CloudExadataInfrastructureCustomerContactsToSendToOci {
+        email: pulumi.Input<string>;
+    }
+    interface CloudExadataInfrastructureMaintenanceWindow {
+        /**
+         * The custom action timeout in minutes for the maintenance window.
+         */
+        customActionTimeoutInMins: pulumi.Input<number>;
+        /**
+         * The days of the week when maintenance can be performed.
+         */
+        daysOfWeeks?: pulumi.Input<pulumi.Input<inputs.odb.CloudExadataInfrastructureMaintenanceWindowDaysOfWeek>[]>;
+        /**
+         * The hours of the day when maintenance can be performed.
+         */
+        hoursOfDays?: pulumi.Input<pulumi.Input<number>[]>;
+        /**
+         * ndicates whether custom action timeout is enabled for the maintenance window.
+         */
+        isCustomActionTimeoutEnabled: pulumi.Input<boolean>;
+        /**
+         * The lead time in weeks before the maintenance window.
+         */
+        leadTimeInWeeks?: pulumi.Input<number>;
+        /**
+         * The months when maintenance can be performed.
+         */
+        months?: pulumi.Input<pulumi.Input<inputs.odb.CloudExadataInfrastructureMaintenanceWindowMonth>[]>;
+        /**
+         * The patching mode for the maintenance window.
+         */
+        patchingMode: pulumi.Input<string>;
+        /**
+         * The preference for the maintenance window scheduling.
+         */
+        preference: pulumi.Input<string>;
+        /**
+         * The weeks of the month when maintenance can be performed.
+         */
+        weeksOfMonths?: pulumi.Input<pulumi.Input<number>[]>;
+    }
+    interface CloudExadataInfrastructureMaintenanceWindowDaysOfWeek {
+        name: pulumi.Input<string>;
+    }
+    interface CloudExadataInfrastructureMaintenanceWindowMonth {
+        name: pulumi.Input<string>;
+    }
+    interface CloudExadataInfrastructureTimeouts {
+        /**
+         * A string that can be [parsed as a duration](https://pkg.go.dev/time#ParseDuration) consisting of numbers and unit suffixes, such as "30s" or "2h45m". Valid time units are "s" (seconds), "m" (minutes), "h" (hours).
+         */
+        create?: pulumi.Input<string>;
+        /**
+         * A string that can be [parsed as a duration](https://pkg.go.dev/time#ParseDuration) consisting of numbers and unit suffixes, such as "30s" or "2h45m". Valid time units are "s" (seconds), "m" (minutes), "h" (hours). Setting a timeout for a Delete operation is only applicable if changes are saved into state before the destroy operation occurs.
+         */
+        delete?: pulumi.Input<string>;
+        /**
+         * A string that can be [parsed as a duration](https://pkg.go.dev/time#ParseDuration) consisting of numbers and unit suffixes, such as "30s" or "2h45m". Valid time units are "s" (seconds), "m" (minutes), "h" (hours).
+         */
+        update?: pulumi.Input<string>;
+    }
+    interface CloudVmClusterDataCollectionOptions {
+        isDiagnosticsEventsEnabled: pulumi.Input<boolean>;
+        isHealthMonitoringEnabled: pulumi.Input<boolean>;
+        isIncidentLogsEnabled: pulumi.Input<boolean>;
+    }
+    interface CloudVmClusterIormConfigCach {
+        dbPlans: pulumi.Input<pulumi.Input<inputs.odb.CloudVmClusterIormConfigCachDbPlan>[]>;
+        lifecycleDetails: pulumi.Input<string>;
+        lifecycleState: pulumi.Input<string>;
+        objective: pulumi.Input<string>;
+    }
+    interface CloudVmClusterIormConfigCachDbPlan {
+        dbName: pulumi.Input<string>;
+        flashCacheLimit: pulumi.Input<string>;
+        share: pulumi.Input<number>;
+    }
+    interface CloudVmClusterTimeouts {
+        /**
+         * A string that can be [parsed as a duration](https://pkg.go.dev/time#ParseDuration) consisting of numbers and unit suffixes, such as "30s" or "2h45m". Valid time units are "s" (seconds), "m" (minutes), "h" (hours).
+         */
+        create?: pulumi.Input<string>;
+        /**
+         * A string that can be [parsed as a duration](https://pkg.go.dev/time#ParseDuration) consisting of numbers and unit suffixes, such as "30s" or "2h45m". Valid time units are "s" (seconds), "m" (minutes), "h" (hours). Setting a timeout for a Delete operation is only applicable if changes are saved into state before the destroy operation occurs.
+         */
+        delete?: pulumi.Input<string>;
+        /**
+         * A string that can be [parsed as a duration](https://pkg.go.dev/time#ParseDuration) consisting of numbers and unit suffixes, such as "30s" or "2h45m". Valid time units are "s" (seconds), "m" (minutes), "h" (hours).
+         */
+        update?: pulumi.Input<string>;
+    }
+    interface NetworkManagedService {
+        managedS3BackupAccesses: pulumi.Input<pulumi.Input<inputs.odb.NetworkManagedServiceManagedS3BackupAccess>[]>;
+        managedServiceIpv4Cidrs: pulumi.Input<pulumi.Input<string>[]>;
+        resourceGatewayArn: pulumi.Input<string>;
+        /**
+         * Specifies the configuration for Amazon S3 access from the ODB network.
+         */
+        s3Accesses: pulumi.Input<pulumi.Input<inputs.odb.NetworkManagedServiceS3Access>[]>;
+        serviceNetworkArn: pulumi.Input<string>;
+        serviceNetworkEndpoints: pulumi.Input<pulumi.Input<inputs.odb.NetworkManagedServiceServiceNetworkEndpoint>[]>;
+        /**
+         * Specifies the configuration for Zero-ETL access from the ODB network.
+         *
+         * The following arguments are optional:
+         */
+        zeroEtlAccesses: pulumi.Input<pulumi.Input<inputs.odb.NetworkManagedServiceZeroEtlAccess>[]>;
+    }
+    interface NetworkManagedServiceManagedS3BackupAccess {
+        ipv4Addresses: pulumi.Input<pulumi.Input<string>[]>;
+        /**
+         * The status of the network resource.
+         */
+        status: pulumi.Input<string>;
+    }
+    interface NetworkManagedServiceS3Access {
+        domainName: pulumi.Input<string>;
+        ipv4Addresses: pulumi.Input<pulumi.Input<string>[]>;
+        /**
+         * Specifies the endpoint policy for Amazon S3 access from the ODB network.
+         */
+        s3PolicyDocument: pulumi.Input<string>;
+        /**
+         * The status of the network resource.
+         */
+        status: pulumi.Input<string>;
+    }
+    interface NetworkManagedServiceServiceNetworkEndpoint {
+        vpcEndpointId: pulumi.Input<string>;
+        vpcEndpointType: pulumi.Input<string>;
+    }
+    interface NetworkManagedServiceZeroEtlAccess {
+        cidr: pulumi.Input<string>;
+        /**
+         * The status of the network resource.
+         */
+        status: pulumi.Input<string>;
+    }
+    interface NetworkOciDnsForwardingConfig {
+        domainName: pulumi.Input<string>;
+        ociDnsListenerIp: pulumi.Input<string>;
+    }
+    interface NetworkPeeringConnectionTimeouts {
+        /**
+         * A string that can be [parsed as a duration](https://pkg.go.dev/time#ParseDuration) consisting of numbers and unit suffixes, such as "30s" or "2h45m". Valid time units are "s" (seconds), "m" (minutes), "h" (hours).
+         */
+        create?: pulumi.Input<string>;
+        /**
+         * A string that can be [parsed as a duration](https://pkg.go.dev/time#ParseDuration) consisting of numbers and unit suffixes, such as "30s" or "2h45m". Valid time units are "s" (seconds), "m" (minutes), "h" (hours). Setting a timeout for a Delete operation is only applicable if changes are saved into state before the destroy operation occurs.
+         */
+        delete?: pulumi.Input<string>;
+        /**
+         * A string that can be [parsed as a duration](https://pkg.go.dev/time#ParseDuration) consisting of numbers and unit suffixes, such as "30s" or "2h45m". Valid time units are "s" (seconds), "m" (minutes), "h" (hours).
+         */
+        update?: pulumi.Input<string>;
+    }
+    interface NetworkTimeouts {
+        /**
+         * A string that can be [parsed as a duration](https://pkg.go.dev/time#ParseDuration) consisting of numbers and unit suffixes, such as "30s" or "2h45m". Valid time units are "s" (seconds), "m" (minutes), "h" (hours).
+         */
+        create?: pulumi.Input<string>;
+        /**
+         * A string that can be [parsed as a duration](https://pkg.go.dev/time#ParseDuration) consisting of numbers and unit suffixes, such as "30s" or "2h45m". Valid time units are "s" (seconds), "m" (minutes), "h" (hours). Setting a timeout for a Delete operation is only applicable if changes are saved into state before the destroy operation occurs.
+         */
+        delete?: pulumi.Input<string>;
+        /**
+         * A string that can be [parsed as a duration](https://pkg.go.dev/time#ParseDuration) consisting of numbers and unit suffixes, such as "30s" or "2h45m". Valid time units are "s" (seconds), "m" (minutes), "h" (hours).
+         */
+        update?: pulumi.Input<string>;
+    }
+}
 export declare namespace opensearch {
     interface AuthorizeVpcEndpointAccessAuthorizedPrincipal {
         /**
@@ -62803,7 +63472,7 @@ export declare namespace quicksight {
     }
     interface DataSetOutputColumn {
         /**
-         * Field folder description.
+         * The description of the column.
          */
         description?: pulumi.Input<string>;
         /**
@@ -62812,6 +63481,9 @@ export declare namespace quicksight {
          * The following arguments are optional:
          */
         name?: pulumi.Input<string>;
+        /**
+         * The data type of the column.
+         */
         type?: pulumi.Input<string>;
     }
     interface DataSetPermission {
@@ -66268,6 +66940,8 @@ export declare namespace s3 {
     interface BucketAclAccessControlPolicyGrantGrantee {
         /**
          * Display name of the owner.
+         *
+         * @deprecated display_name is deprecated. This attribute is no longer returned by AWS and will be removed in a future major version.
          */
         displayName?: pulumi.Input<string>;
         /**
@@ -66290,6 +66964,8 @@ export declare namespace s3 {
     interface BucketAclAccessControlPolicyOwner {
         /**
          * Display name of the owner.
+         *
+         * @deprecated display_name is deprecated. This attribute is no longer returned by AWS and will be removed in a future major version.
          */
         displayName?: pulumi.Input<string>;
         /**
@@ -66320,6 +66996,8 @@ export declare namespace s3 {
     interface BucketAclV2AccessControlPolicyGrantGrantee {
         /**
          * Display name of the owner.
+         *
+         * @deprecated display_name is deprecated. This attribute is no longer returned by AWS and will be removed in a future major version.
          */
         displayName?: pulumi.Input<string>;
         /**
@@ -66342,6 +67020,8 @@ export declare namespace s3 {
     interface BucketAclV2AccessControlPolicyOwner {
         /**
          * Display name of the owner.
+         *
+         * @deprecated display_name is deprecated. This attribute is no longer returned by AWS and will be removed in a future major version.
          */
         displayName?: pulumi.Input<string>;
         /**
@@ -66906,6 +67586,9 @@ export declare namespace s3 {
         permission: pulumi.Input<string>;
     }
     interface BucketLoggingTargetGrantGrantee {
+        /**
+         * @deprecated display_name is deprecated. This attribute is no longer returned by AWS and will be removed in a future major version.
+         */
         displayName?: pulumi.Input<string>;
         /**
          * Email address of the grantee. See [Regions and Endpoints](https://docs.aws.amazon.com/general/latest/gr/rande.html#s3_region) for supported AWS regions where this argument can be specified.
@@ -66953,6 +67636,9 @@ export declare namespace s3 {
         permission: pulumi.Input<string>;
     }
     interface BucketLoggingV2TargetGrantGrantee {
+        /**
+         * @deprecated display_name is deprecated. This attribute is no longer returned by AWS and will be removed in a future major version.
+         */
         displayName?: pulumi.Input<string>;
         /**
          * Email address of the grantee. See [Regions and Endpoints](https://docs.aws.amazon.com/general/latest/gr/rande.html#s3_region) for supported AWS regions where this argument can be specified.
@@ -74186,11 +74872,11 @@ export declare namespace securitylake {
     }
     interface SubscriberSourceAwsLogSourceResource {
         /**
-         * Provides data expiration details of Amazon Security Lake object.
+         * The name for a AWS source. This must be a Regionally unique value. Valid values: `ROUTE53`, `VPC_FLOW`, `SH_FINDINGS`, `CLOUD_TRAIL_MGMT`, `LAMBDA_EXECUTION`, `S3_DATA`, `EKS_AUDIT` and `WAF`.
          */
         sourceName: pulumi.Input<string>;
         /**
-         * Provides data storage transition details of Amazon Security Lake object.
+         * The version for a AWS source. This must be a Regionally unique value.
          */
         sourceVersion?: pulumi.Input<string>;
     }
@@ -75949,6 +76635,10 @@ export declare namespace synthetics {
         environmentVariables?: pulumi.Input<{
             [key: string]: pulumi.Input<string>;
         }>;
+        /**
+         * Amount of ephemeral storage (in MB) allocated for the canary run during execution. Defaults to 1024.
+         */
+        ephemeralStorage?: pulumi.Input<number>;
         /**
          * Maximum amount of memory available to the canary while it is running, in MB. The value you specify must be a multiple of 64.
          */
@@ -75967,6 +76657,16 @@ export declare namespace synthetics {
          * Rate expression or cron expression that defines how often the canary is to run. For rate expression, the syntax is `rate(number unit)`. _unit_ can be `minute`, `minutes`, or `hour`. For cron expression, the syntax is `cron(expression)`. For more information about the syntax for cron expressions, see [Scheduling canary runs using cron](https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/CloudWatch_Synthetics_Canaries_cron.html).
          */
         expression: pulumi.Input<string>;
+        /**
+         * Configuration block for canary retries. Detailed below.
+         */
+        retryConfig?: pulumi.Input<inputs.synthetics.CanaryScheduleRetryConfig>;
+    }
+    interface CanaryScheduleRetryConfig {
+        /**
+         * Maximum number of retries. The value must be less than or equal to `2`. If `maxRetries` is `2`, `run_config.timeout_in_seconds` should be less than 600 seconds. Defaults to `0`.
+         */
+        maxRetries: pulumi.Input<number>;
     }
     interface CanaryTimeline {
         /**
@@ -83021,13 +83721,7 @@ export declare namespace wafv2 {
         responseInspection?: pulumi.Input<inputs.wafv2.WebAclRuleStatementManagedRuleGroupStatementManagedRuleGroupConfigAwsManagedRulesAcfpRuleSetResponseInspection>;
     }
     interface WebAclRuleStatementManagedRuleGroupStatementManagedRuleGroupConfigAwsManagedRulesAcfpRuleSetRequestInspection {
-        /**
-         * The names of the fields in the request payload that contain your customer's primary physical address. See `addressFields` for more details.
-         */
         addressFields?: pulumi.Input<inputs.wafv2.WebAclRuleStatementManagedRuleGroupStatementManagedRuleGroupConfigAwsManagedRulesAcfpRuleSetRequestInspectionAddressFields>;
-        /**
-         * The name of the field in the request payload that contains your customer's email. See `emailField` for more details.
-         */
         emailField?: pulumi.Input<inputs.wafv2.WebAclRuleStatementManagedRuleGroupStatementManagedRuleGroupConfigAwsManagedRulesAcfpRuleSetRequestInspectionEmailField>;
         /**
          * Details about your login page password field. See `passwordField` for more details.
@@ -83037,9 +83731,6 @@ export declare namespace wafv2 {
          * The payload type for your login endpoint, either JSON or form encoded.
          */
         payloadType: pulumi.Input<string>;
-        /**
-         * The names of the fields in the request payload that contain your customer's primary phone number. See `phoneNumberFields` for more details.
-         */
         phoneNumberFields?: pulumi.Input<inputs.wafv2.WebAclRuleStatementManagedRuleGroupStatementManagedRuleGroupConfigAwsManagedRulesAcfpRuleSetRequestInspectionPhoneNumberFields>;
         /**
          * Details about your login page username field. See `usernameField` for more details.