@pulumi/aws 6.6.0 → 6.6.1

package/types/input.d.ts

@@ -959,9 +959,6 @@ export declare namespace alb {
     interface ListenerRuleConditionHostHeader {
         /**
          * List of header value patterns to match. Maximum size of each pattern is 128 characters. Comparison is case insensitive. Wildcard characters supported: * (matches 0 or more characters) and ? (matches exactly 1 character). If the same header appears multiple times in the request they will be searched in order until a match is found. Only one pattern needs to match for the condition to be satisfied. To require that all of the strings are a match, create one condition block per string.
-         *
-         *
-         * Query String Value Blocks (for `query_string.values`) support the following:
          */
         values: pulumi.Input<pulumi.Input<string>[]>;
     }
@@ -978,18 +975,12 @@ export declare namespace alb {
     interface ListenerRuleConditionHttpRequestMethod {
         /**
          * List of header value patterns to match. Maximum size of each pattern is 128 characters. Comparison is case insensitive. Wildcard characters supported: * (matches 0 or more characters) and ? (matches exactly 1 character). If the same header appears multiple times in the request they will be searched in order until a match is found. Only one pattern needs to match for the condition to be satisfied. To require that all of the strings are a match, create one condition block per string.
-         *
-         *
-         * Query String Value Blocks (for `query_string.values`) support the following:
          */
         values: pulumi.Input<pulumi.Input<string>[]>;
     }
     interface ListenerRuleConditionPathPattern {
         /**
          * List of header value patterns to match. Maximum size of each pattern is 128 characters. Comparison is case insensitive. Wildcard characters supported: * (matches 0 or more characters) and ? (matches exactly 1 character). If the same header appears multiple times in the request they will be searched in order until a match is found. Only one pattern needs to match for the condition to be satisfied. To require that all of the strings are a match, create one condition block per string.
-         *
-         *
-         * Query String Value Blocks (for `query_string.values`) support the following:
          */
         values: pulumi.Input<pulumi.Input<string>[]>;
     }
@@ -1006,9 +997,6 @@ export declare namespace alb {
     interface ListenerRuleConditionSourceIp {
         /**
          * List of header value patterns to match. Maximum size of each pattern is 128 characters. Comparison is case insensitive. Wildcard characters supported: * (matches 0 or more characters) and ? (matches exactly 1 character). If the same header appears multiple times in the request they will be searched in order until a match is found. Only one pattern needs to match for the condition to be satisfied. To require that all of the strings are a match, create one condition block per string.
-         *
-         *
-         * Query String Value Blocks (for `query_string.values`) support the following:
          */
         values: pulumi.Input<pulumi.Input<string>[]>;
     }
@@ -1657,7 +1645,7 @@ export declare namespace appautoscaling {
     }
     interface PolicyTargetTrackingScalingPolicyConfigurationCustomizedMetricSpecification {
         /**
-         * Configuration block(s) with the dimensions of the metric if the metric was published with dimensions. Detailed below.
+         * Dimensions of the metric.
          */
         dimensions?: pulumi.Input<pulumi.Input<inputs.appautoscaling.PolicyTargetTrackingScalingPolicyConfigurationCustomizedMetricSpecificationDimension>[]>;
         /**
@@ -1677,7 +1665,7 @@ export declare namespace appautoscaling {
          */
         statistic?: pulumi.Input<string>;
         /**
-         * Unit of the metric.
+         * Unit of the metrics to return.
          */
         unit?: pulumi.Input<string>;
     }
@@ -1723,13 +1711,13 @@ export declare namespace appautoscaling {
          */
         stat: pulumi.Input<string>;
         /**
-         * Unit of the metric.
+         * Unit of the metrics to return.
          */
         unit?: pulumi.Input<string>;
     }
     interface PolicyTargetTrackingScalingPolicyConfigurationCustomizedMetricSpecificationMetricMetricStatMetric {
         /**
-         * Configuration block(s) with the dimensions of the metric if the metric was published with dimensions. Detailed below.
+         * Dimensions of the metric.
          */
         dimensions?: pulumi.Input<pulumi.Input<inputs.appautoscaling.PolicyTargetTrackingScalingPolicyConfigurationCustomizedMetricSpecificationMetricMetricStatMetricDimension>[]>;
         /**
@@ -2684,7 +2672,7 @@ export declare namespace appflow {
          */
         entityName: pulumi.Input<string>;
         /**
-         * Settings that determine how Amazon AppFlow handles an error when placing data in the destination. See Error Handling Config for more details.
+         * Settings that determine how Amazon AppFlow handles an error when placing data in the custom connector as destination. See Error Handling Config for more details.
          */
         errorHandlingConfig?: pulumi.Input<inputs.appflow.FlowDestinationFlowConfigDestinationConnectorPropertiesCustomConnectorErrorHandlingConfig>;
         /**
@@ -2722,7 +2710,7 @@ export declare namespace appflow {
     }
     interface FlowDestinationFlowConfigDestinationConnectorPropertiesEventBridge {
         /**
-         * Settings that determine how Amazon AppFlow handles an error when placing data in the destination. See Error Handling Config for more details.
+         * Settings that determine how Amazon AppFlow handles an error when placing data in the custom connector as destination. See Error Handling Config for more details.
          */
         errorHandlingConfig?: pulumi.Input<inputs.appflow.FlowDestinationFlowConfigDestinationConnectorPropertiesEventBridgeErrorHandlingConfig>;
         /**
@@ -2746,7 +2734,7 @@ export declare namespace appflow {
     }
     interface FlowDestinationFlowConfigDestinationConnectorPropertiesHoneycode {
         /**
-         * Settings that determine how Amazon AppFlow handles an error when placing data in the destination. See Error Handling Config for more details.
+         * Settings that determine how Amazon AppFlow handles an error when placing data in the custom connector as destination. See Error Handling Config for more details.
          */
         errorHandlingConfig?: pulumi.Input<inputs.appflow.FlowDestinationFlowConfigDestinationConnectorPropertiesHoneycodeErrorHandlingConfig>;
         /**
@@ -2772,7 +2760,7 @@ export declare namespace appflow {
     }
     interface FlowDestinationFlowConfigDestinationConnectorPropertiesMarketo {
         /**
-         * Settings that determine how Amazon AppFlow handles an error when placing data in the destination. See Error Handling Config for more details.
+         * Settings that determine how Amazon AppFlow handles an error when placing data in the custom connector as destination. See Error Handling Config for more details.
          */
         errorHandlingConfig?: pulumi.Input<inputs.appflow.FlowDestinationFlowConfigDestinationConnectorPropertiesMarketoErrorHandlingConfig>;
         /**
@@ -2796,11 +2784,11 @@ export declare namespace appflow {
     }
     interface FlowDestinationFlowConfigDestinationConnectorPropertiesRedshift {
         /**
-         * Object key for the bucket in which Amazon AppFlow places the destination files.
+         * Amazon S3 bucket prefix.
          */
         bucketPrefix?: pulumi.Input<string>;
         /**
-         * Settings that determine how Amazon AppFlow handles an error when placing data in the destination. See Error Handling Config for more details.
+         * Settings that determine how Amazon AppFlow handles an error when placing data in the custom connector as destination. See Error Handling Config for more details.
          */
         errorHandlingConfig?: pulumi.Input<inputs.appflow.FlowDestinationFlowConfigDestinationConnectorPropertiesRedshiftErrorHandlingConfig>;
         /**
@@ -2828,11 +2816,11 @@ export declare namespace appflow {
     }
     interface FlowDestinationFlowConfigDestinationConnectorPropertiesS3 {
         /**
-         * Amazon S3 bucket name in which Amazon AppFlow places the transferred data.
+         * Name of the Amazon S3 bucket.
          */
         bucketName: pulumi.Input<string>;
         /**
-         * Object key for the bucket in which Amazon AppFlow places the destination files.
+         * Amazon S3 bucket prefix.
          */
         bucketPrefix?: pulumi.Input<string>;
         /**
@@ -2876,7 +2864,7 @@ export declare namespace appflow {
     }
     interface FlowDestinationFlowConfigDestinationConnectorPropertiesSalesforce {
         /**
-         * Settings that determine how Amazon AppFlow handles an error when placing data in the destination. See Error Handling Config for more details.
+         * Settings that determine how Amazon AppFlow handles an error when placing data in the custom connector as destination. See Error Handling Config for more details.
          */
         errorHandlingConfig?: pulumi.Input<inputs.appflow.FlowDestinationFlowConfigDestinationConnectorPropertiesSalesforceErrorHandlingConfig>;
         /**
@@ -2908,7 +2896,7 @@ export declare namespace appflow {
     }
     interface FlowDestinationFlowConfigDestinationConnectorPropertiesSapoData {
         /**
-         * Settings that determine how Amazon AppFlow handles an error when placing data in the destination. See Error Handling Config for more details.
+         * Settings that determine how Amazon AppFlow handles an error when placing data in the custom connector as destination. See Error Handling Config for more details.
          */
         errorHandlingConfig?: pulumi.Input<inputs.appflow.FlowDestinationFlowConfigDestinationConnectorPropertiesSapoDataErrorHandlingConfig>;
         /**
@@ -2954,11 +2942,11 @@ export declare namespace appflow {
     }
     interface FlowDestinationFlowConfigDestinationConnectorPropertiesSnowflake {
         /**
-         * Object key for the bucket in which Amazon AppFlow places the destination files.
+         * Amazon S3 bucket prefix.
          */
         bucketPrefix?: pulumi.Input<string>;
         /**
-         * Settings that determine how Amazon AppFlow handles an error when placing data in the destination. See Error Handling Config for more details.
+         * Settings that determine how Amazon AppFlow handles an error when placing data in the custom connector as destination. See Error Handling Config for more details.
          */
         errorHandlingConfig?: pulumi.Input<inputs.appflow.FlowDestinationFlowConfigDestinationConnectorPropertiesSnowflakeErrorHandlingConfig>;
         /**
@@ -2986,11 +2974,11 @@ export declare namespace appflow {
     }
     interface FlowDestinationFlowConfigDestinationConnectorPropertiesUpsolver {
         /**
-         * Amazon S3 bucket name in which Amazon AppFlow places the transferred data.
+         * Name of the Amazon S3 bucket.
          */
         bucketName: pulumi.Input<string>;
         /**
-         * Object key for the bucket in which Amazon AppFlow places the destination files.
+         * Amazon S3 bucket prefix.
          */
         bucketPrefix?: pulumi.Input<string>;
         /**
@@ -3030,7 +3018,7 @@ export declare namespace appflow {
     }
     interface FlowDestinationFlowConfigDestinationConnectorPropertiesZendesk {
         /**
-         * Settings that determine how Amazon AppFlow handles an error when placing data in the destination. See Error Handling Config for more details.
+         * Settings that determine how Amazon AppFlow handles an error when placing data in the custom connector as destination. See Error Handling Config for more details.
          */
         errorHandlingConfig?: pulumi.Input<inputs.appflow.FlowDestinationFlowConfigDestinationConnectorPropertiesZendeskErrorHandlingConfig>;
         /**
@@ -3204,11 +3192,11 @@ export declare namespace appflow {
     }
     interface FlowSourceFlowConfigSourceConnectorPropertiesS3 {
         /**
-         * Amazon S3 bucket name in which Amazon AppFlow places the transferred data.
+         * Name of the Amazon S3 bucket.
          */
         bucketName: pulumi.Input<string>;
         /**
-         * Object key for the bucket in which Amazon AppFlow places the destination files.
+         * Amazon S3 bucket prefix.
          */
         bucketPrefix?: pulumi.Input<string>;
         /**
@@ -3497,7 +3485,7 @@ export declare namespace appmesh {
     }
     interface GatewayRouteSpecGrpcRouteMatch {
         /**
-         * The port number that corresponds to the target for Virtual Service provider port. This is required when the provider (router or node) of the Virtual Service has multiple listeners.
+         * The port number to match from the request.
          */
         port?: pulumi.Input<number>;
         /**
@@ -3583,19 +3571,19 @@ export declare namespace appmesh {
          */
         headers?: pulumi.Input<pulumi.Input<inputs.appmesh.GatewayRouteSpecHttp2RouteMatchHeader>[]>;
         /**
-         * Host name to rewrite.
+         * Host name to match on.
          */
         hostname?: pulumi.Input<inputs.appmesh.GatewayRouteSpecHttp2RouteMatchHostname>;
         /**
-         * Exact path to rewrite.
+         * Client request path to match on.
          */
         path?: pulumi.Input<inputs.appmesh.GatewayRouteSpecHttp2RouteMatchPath>;
         /**
-         * The port number that corresponds to the target for Virtual Service provider port. This is required when the provider (router or node) of the Virtual Service has multiple listeners.
+         * The port number to match from the request.
          */
         port?: pulumi.Input<number>;
         /**
-         * Specified beginning characters to rewrite.
+         * Header value sent by the client must begin with the specified characters.
          */
         prefix?: pulumi.Input<string>;
         /**
@@ -3619,11 +3607,11 @@ export declare namespace appmesh {
     }
     interface GatewayRouteSpecHttp2RouteMatchHeaderMatch {
         /**
-         * Value used to replace matched path.
+         * Header value sent by the client must match the specified value exactly.
          */
         exact?: pulumi.Input<string>;
         /**
-         * Specified beginning characters to rewrite.
+         * Header value sent by the client must begin with the specified characters.
          */
         prefix?: pulumi.Input<string>;
         /**
@@ -3681,7 +3669,7 @@ export declare namespace appmesh {
     }
     interface GatewayRouteSpecHttp2RouteMatchQueryParameterMatch {
         /**
-         * Value used to replace matched path.
+         * Header value sent by the client must match the specified value exactly.
          */
         exact?: pulumi.Input<string>;
     }
@@ -3763,19 +3751,19 @@ export declare namespace appmesh {
          */
         headers?: pulumi.Input<pulumi.Input<inputs.appmesh.GatewayRouteSpecHttpRouteMatchHeader>[]>;
         /**
-         * Host name to rewrite.
+         * Host name to match on.
          */
         hostname?: pulumi.Input<inputs.appmesh.GatewayRouteSpecHttpRouteMatchHostname>;
         /**
-         * Exact path to rewrite.
+         * Client request path to match on.
          */
         path?: pulumi.Input<inputs.appmesh.GatewayRouteSpecHttpRouteMatchPath>;
         /**
-         * The port number that corresponds to the target for Virtual Service provider port. This is required when the provider (router or node) of the Virtual Service has multiple listeners.
+         * The port number to match from the request.
          */
         port?: pulumi.Input<number>;
         /**
-         * Specified beginning characters to rewrite.
+         * Header value sent by the client must begin with the specified characters.
          */
         prefix?: pulumi.Input<string>;
         /**
@@ -3799,11 +3787,11 @@ export declare namespace appmesh {
     }
     interface GatewayRouteSpecHttpRouteMatchHeaderMatch {
         /**
-         * Value used to replace matched path.
+         * Header value sent by the client must match the specified value exactly.
          */
         exact?: pulumi.Input<string>;
         /**
-         * Specified beginning characters to rewrite.
+         * Header value sent by the client must begin with the specified characters.
          */
         prefix?: pulumi.Input<string>;
         /**
@@ -3861,7 +3849,7 @@ export declare namespace appmesh {
     }
     interface GatewayRouteSpecHttpRouteMatchQueryParameterMatch {
         /**
-         * Value used to replace matched path.
+         * Header value sent by the client must match the specified value exactly.
          */
         exact?: pulumi.Input<string>;
     }
@@ -3954,8 +3942,7 @@ export declare namespace appmesh {
          */
         port?: pulumi.Input<number>;
         /**
-         * Value sent by the client must begin with the specified characters. Must be between 1 and 255 characters in length.
-         * This parameter must always start with /, which by itself matches all requests to the virtual router service name.
+         * Header value sent by the client must begin with the specified characters.
          */
         prefix?: pulumi.Input<string>;
         /**
@@ -3983,12 +3970,11 @@ export declare namespace appmesh {
          */
         exact?: pulumi.Input<string>;
         /**
-         * Value sent by the client must begin with the specified characters. Must be between 1 and 255 characters in length.
-         * This parameter must always start with /, which by itself matches all requests to the virtual router service name.
+         * Header value sent by the client must begin with the specified characters.
          */
         prefix?: pulumi.Input<string>;
         /**
-         * Object that specifies the range of numbers that the value sent by the client must be included in.
+         * Object that specifies the range of numbers that the header value sent by the client must be included in.
          */
         range?: pulumi.Input<inputs.appmesh.RouteSpecGrpcRouteMatchMetadataMatchRange>;
         /**
@@ -3996,7 +3982,7 @@ export declare namespace appmesh {
          */
         regex?: pulumi.Input<string>;
         /**
-         * Value sent by the client must end with the specified characters. Must be between 1 and 255 characters in length.
+         * Header value sent by the client must end with the specified characters.
          */
         suffix?: pulumi.Input<string>;
     }
@@ -4019,7 +4005,6 @@ export declare namespace appmesh {
         /**
          * List of HTTP retry events.
          * Valid values: `client-error` (HTTP status code 409), `gateway-error` (HTTP status codes 502, 503, and 504), `server-error` (HTTP status codes 500, 501, 502, 503, 504, 505, 506, 507, 508, 510, and 511), `stream-error` (retry on refused stream).
-         * Valid values: `client-error` (HTTP status code 409), `gateway-error` (HTTP status codes 502, 503, and 504), `server-error` (HTTP status codes 500, 501, 502, 503, 504, 505, 506, 507, 508, 510, and 511), `stream-error` (retry on refused stream).
          */
         httpRetryEvents?: pulumi.Input<pulumi.Input<string>[]>;
         /**
@@ -4032,9 +4017,6 @@ export declare namespace appmesh {
         perRetryTimeout: pulumi.Input<inputs.appmesh.RouteSpecGrpcRouteRetryPolicyPerRetryTimeout>;
         /**
          * List of TCP retry events. The only valid value is `connection-error`.
-         *
-         *
-         * You must specify at least one value for `httpRetryEvents`, or at least one value for `tcpRetryEvents`.
          */
         tcpRetryEvents?: pulumi.Input<pulumi.Input<string>[]>;
     }
@@ -4135,8 +4117,7 @@ export declare namespace appmesh {
          */
         port?: pulumi.Input<number>;
         /**
-         * Value sent by the client must begin with the specified characters. Must be between 1 and 255 characters in length.
-         * This parameter must always start with /, which by itself matches all requests to the virtual router service name.
+         * Header value sent by the client must begin with the specified characters.
          */
         prefix?: pulumi.Input<string>;
         /**
@@ -4168,12 +4149,11 @@ export declare namespace appmesh {
          */
         exact?: pulumi.Input<string>;
         /**
-         * Value sent by the client must begin with the specified characters. Must be between 1 and 255 characters in length.
-         * This parameter must always start with /, which by itself matches all requests to the virtual router service name.
+         * Header value sent by the client must begin with the specified characters.
          */
         prefix?: pulumi.Input<string>;
         /**
-         * Object that specifies the range of numbers that the value sent by the client must be included in.
+         * Object that specifies the range of numbers that the header value sent by the client must be included in.
          */
         range?: pulumi.Input<inputs.appmesh.RouteSpecHttp2RouteMatchHeaderMatchRange>;
         /**
@@ -4181,7 +4161,7 @@ export declare namespace appmesh {
          */
         regex?: pulumi.Input<string>;
         /**
-         * Value sent by the client must end with the specified characters. Must be between 1 and 255 characters in length.
+         * Header value sent by the client must end with the specified characters.
          */
         suffix?: pulumi.Input<string>;
     }
@@ -4197,11 +4177,11 @@ export declare namespace appmesh {
     }
     interface RouteSpecHttp2RouteMatchPath {
         /**
-         * Value sent by the client must match the specified value exactly. Must be between 1 and 255 characters in length.
+         * Header value sent by the client must match the specified value exactly.
          */
         exact?: pulumi.Input<string>;
         /**
-         * Value sent by the client must include the specified characters. Must be between 1 and 255 characters in length.
+         * Header value sent by the client must include the specified characters.
          */
         regex?: pulumi.Input<string>;
     }
@@ -4225,7 +4205,6 @@ export declare namespace appmesh {
         /**
          * List of HTTP retry events.
          * Valid values: `client-error` (HTTP status code 409), `gateway-error` (HTTP status codes 502, 503, and 504), `server-error` (HTTP status codes 500, 501, 502, 503, 504, 505, 506, 507, 508, 510, and 511), `stream-error` (retry on refused stream).
-         * Valid values: `client-error` (HTTP status code 409), `gateway-error` (HTTP status codes 502, 503, and 504), `server-error` (HTTP status codes 500, 501, 502, 503, 504, 505, 506, 507, 508, 510, and 511), `stream-error` (retry on refused stream).
          */
         httpRetryEvents?: pulumi.Input<pulumi.Input<string>[]>;
         /**
@@ -4238,9 +4217,6 @@ export declare namespace appmesh {
         perRetryTimeout: pulumi.Input<inputs.appmesh.RouteSpecHttp2RouteRetryPolicyPerRetryTimeout>;
         /**
          * List of TCP retry events. The only valid value is `connection-error`.
-         *
-         *
-         * You must specify at least one value for `httpRetryEvents`, or at least one value for `tcpRetryEvents`.
          */
         tcpRetryEvents?: pulumi.Input<pulumi.Input<string>[]>;
     }
@@ -4341,8 +4317,7 @@ export declare namespace appmesh {
          */
         port?: pulumi.Input<number>;
         /**
-         * Value sent by the client must begin with the specified characters. Must be between 1 and 255 characters in length.
-         * This parameter must always start with /, which by itself matches all requests to the virtual router service name.
+         * Header value sent by the client must begin with the specified characters.
          */
         prefix?: pulumi.Input<string>;
         /**
@@ -4374,12 +4349,11 @@ export declare namespace appmesh {
          */
         exact?: pulumi.Input<string>;
         /**
-         * Value sent by the client must begin with the specified characters. Must be between 1 and 255 characters in length.
-         * This parameter must always start with /, which by itself matches all requests to the virtual router service name.
+         * Header value sent by the client must begin with the specified characters.
          */
         prefix?: pulumi.Input<string>;
         /**
-         * Object that specifies the range of numbers that the value sent by the client must be included in.
+         * Object that specifies the range of numbers that the header value sent by the client must be included in.
          */
         range?: pulumi.Input<inputs.appmesh.RouteSpecHttpRouteMatchHeaderMatchRange>;
         /**
@@ -4387,7 +4361,7 @@ export declare namespace appmesh {
          */
         regex?: pulumi.Input<string>;
         /**
-         * Value sent by the client must end with the specified characters. Must be between 1 and 255 characters in length.
+         * Header value sent by the client must end with the specified characters.
          */
         suffix?: pulumi.Input<string>;
     }
@@ -4403,11 +4377,11 @@ export declare namespace appmesh {
     }
     interface RouteSpecHttpRouteMatchPath {
         /**
-         * Value sent by the client must match the specified value exactly. Must be between 1 and 255 characters in length.
+         * Header value sent by the client must match the specified value exactly.
          */
         exact?: pulumi.Input<string>;
         /**
-         * Value sent by the client must include the specified characters. Must be between 1 and 255 characters in length.
+         * Header value sent by the client must include the specified characters.
          */
         regex?: pulumi.Input<string>;
     }
@@ -4431,7 +4405,6 @@ export declare namespace appmesh {
         /**
          * List of HTTP retry events.
          * Valid values: `client-error` (HTTP status code 409), `gateway-error` (HTTP status codes 502, 503, and 504), `server-error` (HTTP status codes 500, 501, 502, 503, 504, 505, 506, 507, 508, 510, and 511), `stream-error` (retry on refused stream).
-         * Valid values: `client-error` (HTTP status code 409), `gateway-error` (HTTP status codes 502, 503, and 504), `server-error` (HTTP status codes 500, 501, 502, 503, 504, 505, 506, 507, 508, 510, and 511), `stream-error` (retry on refused stream).
          */
         httpRetryEvents?: pulumi.Input<pulumi.Input<string>[]>;
         /**
@@ -4444,9 +4417,6 @@ export declare namespace appmesh {
         perRetryTimeout: pulumi.Input<inputs.appmesh.RouteSpecHttpRouteRetryPolicyPerRetryTimeout>;
         /**
          * List of TCP retry events. The only valid value is `connection-error`.
-         *
-         *
-         * You must specify at least one value for `httpRetryEvents`, or at least one value for `tcpRetryEvents`.
          */
         tcpRetryEvents?: pulumi.Input<pulumi.Input<string>[]>;
     }
@@ -5294,7 +5264,7 @@ export declare namespace appmesh {
          */
         unit: pulumi.Input<string>;
         /**
-         * The specified value for the JSON. Must be between 1 and 100 characters in length.
+         * Number of time units. Minimum value of `0`.
          */
         value: pulumi.Input<number>;
     }
@@ -5352,7 +5322,7 @@ export declare namespace appmesh {
          */
         unit: pulumi.Input<string>;
         /**
-         * The specified value for the JSON. Must be between 1 and 100 characters in length.
+         * Number of time units. Minimum value of `0`.
          */
         value: pulumi.Input<number>;
     }
@@ -5392,7 +5362,7 @@ export declare namespace appmesh {
          */
         unit: pulumi.Input<string>;
         /**
-         * The specified value for the JSON. Must be between 1 and 100 characters in length.
+         * Number of time units. Minimum value of `0`.
          */
         value: pulumi.Input<number>;
     }
@@ -5412,7 +5382,7 @@ export declare namespace appmesh {
          */
         unit: pulumi.Input<string>;
         /**
-         * The specified value for the JSON. Must be between 1 and 100 characters in length.
+         * Number of time units. Minimum value of `0`.
          */
         value: pulumi.Input<number>;
     }
@@ -6783,7 +6753,7 @@ export declare namespace autoscaling {
     }
     interface GroupMixedInstancesPolicyLaunchTemplate {
         /**
-         * Nested argument defines the Launch Template. Defined below.
+         * Override the instance launch template specification in the Launch Template.
          */
         launchTemplateSpecification: pulumi.Input<inputs.autoscaling.GroupMixedInstancesPolicyLaunchTemplateLaunchTemplateSpecification>;
         /**
@@ -6815,7 +6785,7 @@ export declare namespace autoscaling {
          */
         instanceType?: pulumi.Input<string>;
         /**
-         * Nested argument defines the Launch Template. Defined below.
+         * Override the instance launch template specification in the Launch Template.
          */
         launchTemplateSpecification?: pulumi.Input<inputs.autoscaling.GroupMixedInstancesPolicyLaunchTemplateOverrideLaunchTemplateSpecification>;
         /**
@@ -6953,7 +6923,7 @@ export declare namespace autoscaling {
     }
     interface GroupMixedInstancesPolicyLaunchTemplateOverrideInstanceRequirementsAcceleratorCount {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * Maximum.
          */
         max?: pulumi.Input<number>;
         /**
@@ -6963,7 +6933,7 @@ export declare namespace autoscaling {
     }
     interface GroupMixedInstancesPolicyLaunchTemplateOverrideInstanceRequirementsAcceleratorTotalMemoryMib {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * Maximum.
          */
         max?: pulumi.Input<number>;
         /**
@@ -6973,7 +6943,7 @@ export declare namespace autoscaling {
     }
     interface GroupMixedInstancesPolicyLaunchTemplateOverrideInstanceRequirementsBaselineEbsBandwidthMbps {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * Maximum.
          */
         max?: pulumi.Input<number>;
         /**
@@ -6983,7 +6953,7 @@ export declare namespace autoscaling {
     }
     interface GroupMixedInstancesPolicyLaunchTemplateOverrideInstanceRequirementsMemoryGibPerVcpu {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * Maximum.
          */
         max?: pulumi.Input<number>;
         /**
@@ -6993,7 +6963,7 @@ export declare namespace autoscaling {
     }
     interface GroupMixedInstancesPolicyLaunchTemplateOverrideInstanceRequirementsMemoryMib {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * Maximum.
          */
         max?: pulumi.Input<number>;
         /**
@@ -7003,7 +6973,7 @@ export declare namespace autoscaling {
     }
     interface GroupMixedInstancesPolicyLaunchTemplateOverrideInstanceRequirementsNetworkBandwidthGbps {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * Maximum.
          */
         max?: pulumi.Input<number>;
         /**
@@ -7013,7 +6983,7 @@ export declare namespace autoscaling {
     }
     interface GroupMixedInstancesPolicyLaunchTemplateOverrideInstanceRequirementsNetworkInterfaceCount {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * Maximum.
          */
         max?: pulumi.Input<number>;
         /**
@@ -7023,7 +6993,7 @@ export declare namespace autoscaling {
     }
     interface GroupMixedInstancesPolicyLaunchTemplateOverrideInstanceRequirementsTotalLocalStorageGb {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * Maximum.
          */
         max?: pulumi.Input<number>;
         /**
@@ -7033,7 +7003,7 @@ export declare namespace autoscaling {
     }
     interface GroupMixedInstancesPolicyLaunchTemplateOverrideInstanceRequirementsVcpuCount {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * Maximum.
          */
         max?: pulumi.Input<number>;
         /**
@@ -8651,15 +8621,15 @@ export declare namespace chimesdkmediapipelines {
          */
         callAnalyticsStreamCategories?: pulumi.Input<pulumi.Input<string>[]>;
         /**
-         * Labels all personally identifiable information (PII) identified in Utterance events.
+         * Labels all personally identifiable information (PII) identified in Transcript events.
          */
         contentIdentificationType?: pulumi.Input<string>;
         /**
-         * Redacts all personally identifiable information (PII) identified in Utterance events.
+         * Redacts all personally identifiable information (PII) identified in Transcript events.
          */
         contentRedactionType?: pulumi.Input<string>;
         /**
-         * Enables partial result stabilization in Utterance events.
+         * Enables partial result stabilization in Transcript events.
          */
         enablePartialResultsStabilization?: pulumi.Input<boolean>;
         /**
@@ -8679,7 +8649,7 @@ export declare namespace chimesdkmediapipelines {
          */
         partialResultsStability?: pulumi.Input<string>;
         /**
-         * Types of personally identifiable information (PII) to redact from an Utterance event.
+         * Types of personally identifiable information (PII) to redact from a Transcript event.
          */
         piiEntityTypes?: pulumi.Input<string>;
         /**
@@ -8687,15 +8657,15 @@ export declare namespace chimesdkmediapipelines {
          */
         postCallAnalyticsSettings?: pulumi.Input<inputs.chimesdkmediapipelines.MediaInsightsPipelineConfigurationElementAmazonTranscribeCallAnalyticsProcessorConfigurationPostCallAnalyticsSettings>;
         /**
-         * Method for applying a vocabulary filter to Utterance events.
+         * Method for applying a vocabulary filter to Transcript events.
          */
         vocabularyFilterMethod?: pulumi.Input<string>;
         /**
-         * Name of the custom vocabulary filter to use when processing Utterance events.
+         * Name of the custom vocabulary filter to use when processing Transcript events.
          */
         vocabularyFilterName?: pulumi.Input<string>;
         /**
-         * Name of the custom vocabulary to use when processing Utterance events.
+         * Name of the custom vocabulary to use when processing Transcript events.
          */
         vocabularyName?: pulumi.Input<string>;
     }
@@ -8719,15 +8689,15 @@ export declare namespace chimesdkmediapipelines {
     }
     interface MediaInsightsPipelineConfigurationElementAmazonTranscribeProcessorConfiguration {
         /**
-         * Labels all personally identifiable information (PII) identified in Utterance events.
+         * Labels all personally identifiable information (PII) identified in Transcript events.
          */
         contentIdentificationType?: pulumi.Input<string>;
         /**
-         * Redacts all personally identifiable information (PII) identified in Utterance events.
+         * Redacts all personally identifiable information (PII) identified in Transcript events.
          */
         contentRedactionType?: pulumi.Input<string>;
         /**
-         * Enables partial result stabilization in Utterance events.
+         * Enables partial result stabilization in Transcript events.
          */
         enablePartialResultsStabilization?: pulumi.Input<boolean>;
         /**
@@ -8747,7 +8717,7 @@ export declare namespace chimesdkmediapipelines {
          */
         partialResultsStability?: pulumi.Input<string>;
         /**
-         * Types of personally identifiable information (PII) to redact from an Utterance event.
+         * Types of personally identifiable information (PII) to redact from a Transcript event.
          */
         piiEntityTypes?: pulumi.Input<string>;
         /**
@@ -8755,27 +8725,27 @@ export declare namespace chimesdkmediapipelines {
          */
         showSpeakerLabel?: pulumi.Input<boolean>;
         /**
-         * Method for applying a vocabulary filter to Utterance events.
+         * Method for applying a vocabulary filter to Transcript events.
          */
         vocabularyFilterMethod?: pulumi.Input<string>;
         /**
-         * Name of the custom vocabulary filter to use when processing Utterance events.
+         * Name of the custom vocabulary filter to use when processing Transcript events.
          */
         vocabularyFilterName?: pulumi.Input<string>;
         /**
-         * Name of the custom vocabulary to use when processing Utterance events.
+         * Name of the custom vocabulary to use when processing Transcript events.
          */
         vocabularyName?: pulumi.Input<string>;
     }
     interface MediaInsightsPipelineConfigurationElementKinesisDataStreamSinkConfiguration {
         /**
-         * Kinesis Data Stream to deliver results.
+         * SQS queue to deliver results.
          */
         insightsTarget: pulumi.Input<string>;
     }
     interface MediaInsightsPipelineConfigurationElementLambdaFunctionSinkConfiguration {
         /**
-         * Kinesis Data Stream to deliver results.
+         * SQS queue to deliver results.
          */
         insightsTarget: pulumi.Input<string>;
     }
@@ -8787,13 +8757,13 @@ export declare namespace chimesdkmediapipelines {
     }
     interface MediaInsightsPipelineConfigurationElementSnsTopicSinkConfiguration {
         /**
-         * Kinesis Data Stream to deliver results.
+         * SQS queue to deliver results.
          */
         insightsTarget: pulumi.Input<string>;
     }
     interface MediaInsightsPipelineConfigurationElementSqsQueueSinkConfiguration {
         /**
-         * Kinesis Data Stream to deliver results.
+         * SQS queue to deliver results.
          */
         insightsTarget: pulumi.Input<string>;
     }
@@ -9022,6 +8992,9 @@ export declare namespace cloudfront {
         cookies?: pulumi.Input<inputs.cloudfront.CachePolicyParametersInCacheKeyAndForwardedToOriginCookiesConfigCookies>;
     }
     interface CachePolicyParametersInCacheKeyAndForwardedToOriginCookiesConfigCookies {
+        /**
+         * List of item names, such as cookies, headers, or query strings.
+         */
         items?: pulumi.Input<pulumi.Input<string>[]>;
     }
     interface CachePolicyParametersInCacheKeyAndForwardedToOriginHeadersConfig {
@@ -9035,6 +9008,9 @@ export declare namespace cloudfront {
         headers?: pulumi.Input<inputs.cloudfront.CachePolicyParametersInCacheKeyAndForwardedToOriginHeadersConfigHeaders>;
     }
     interface CachePolicyParametersInCacheKeyAndForwardedToOriginHeadersConfigHeaders {
+        /**
+         * List of item names, such as cookies, headers, or query strings.
+         */
         items?: pulumi.Input<pulumi.Input<string>[]>;
     }
     interface CachePolicyParametersInCacheKeyAndForwardedToOriginQueryStringsConfig {
@@ -9048,6 +9024,9 @@ export declare namespace cloudfront {
         queryStrings?: pulumi.Input<inputs.cloudfront.CachePolicyParametersInCacheKeyAndForwardedToOriginQueryStringsConfigQueryStrings>;
     }
     interface CachePolicyParametersInCacheKeyAndForwardedToOriginQueryStringsConfigQueryStrings {
+        /**
+         * List of item names, such as cookies, headers, or query strings.
+         */
         items?: pulumi.Input<pulumi.Input<string>[]>;
     }
     interface ContinuousDeploymentPolicyStagingDistributionDnsNames {
@@ -9426,7 +9405,7 @@ export declare namespace cloudfront {
          */
         originAccessControlId?: pulumi.Input<string>;
         /**
-         * Unique identifier for the origin.
+         * Unique identifier of the member origin.
          */
         originId: pulumi.Input<string>;
         /**
@@ -9482,7 +9461,7 @@ export declare namespace cloudfront {
          */
         members: pulumi.Input<pulumi.Input<inputs.cloudfront.DistributionOriginGroupMember>[]>;
         /**
-         * Unique identifier for the origin.
+         * Unique identifier of the member origin.
          */
         originId: pulumi.Input<string>;
     }
@@ -9494,13 +9473,13 @@ export declare namespace cloudfront {
     }
     interface DistributionOriginGroupMember {
         /**
-         * Unique identifier for the origin.
+         * Unique identifier of the member origin.
          */
         originId: pulumi.Input<string>;
     }
     interface DistributionOriginOriginShield {
         /**
-         * Whether the distribution is enabled to accept end user requests for content.
+         * Whether Origin Shield is enabled.
          */
         enabled: pulumi.Input<boolean>;
         /**
@@ -9529,7 +9508,7 @@ export declare namespace cloudfront {
     }
     interface DistributionTrustedKeyGroup {
         /**
-         * Whether the distribution is enabled to accept end user requests for content.
+         * Whether Origin Shield is enabled.
          */
         enabled?: pulumi.Input<boolean>;
         /**
@@ -9549,7 +9528,7 @@ export declare namespace cloudfront {
     }
     interface DistributionTrustedSigner {
         /**
-         * Whether the distribution is enabled to accept end user requests for content.
+         * Whether Origin Shield is enabled.
          */
         enabled?: pulumi.Input<boolean>;
         /**
@@ -9764,7 +9743,7 @@ export declare namespace cloudfront {
          */
         header: pulumi.Input<string>;
         /**
-         * Whether CloudFront overrides a response header with the same name received from the origin with the header specifies here.
+         * Whether CloudFront overrides the `Content-Security-Policy` HTTP response header received from the origin with the one specified in this response headers policy.
          */
         override: pulumi.Input<boolean>;
         /**
@@ -11062,7 +11041,7 @@ export declare namespace codebuild {
          */
         groupName?: pulumi.Input<string>;
         /**
-         * Current status of logs in CloudWatch Logs for a build project. Valid values: `ENABLED`, `DISABLED`. Defaults to `ENABLED`.
+         * Current status of logs in S3 for a build project. Valid values: `ENABLED`, `DISABLED`. Defaults to `DISABLED`.
          */
         status?: pulumi.Input<string>;
         /**
@@ -11084,7 +11063,7 @@ export declare namespace codebuild {
          */
         location?: pulumi.Input<string>;
         /**
-         * Current status of logs in CloudWatch Logs for a build project. Valid values: `ENABLED`, `DISABLED`. Defaults to `ENABLED`.
+         * Current status of logs in S3 for a build project. Valid values: `ENABLED`, `DISABLED`. Defaults to `DISABLED`.
          */
         status?: pulumi.Input<string>;
     }
@@ -12054,6 +12033,9 @@ export declare namespace cognito {
          * The action to take in response to the account takeover action. Valid values are `BLOCK`, `MFA_IF_CONFIGURED`, `MFA_REQUIRED` and `NO_ACTION`.
          */
         eventAction: pulumi.Input<string>;
+        /**
+         * Whether to send a notification.
+         */
         notify: pulumi.Input<boolean>;
     }
     interface RiskConfigurationAccountTakeoverRiskConfigurationActionsLowAction {
@@ -12061,6 +12043,9 @@ export declare namespace cognito {
          * The action to take in response to the account takeover action. Valid values are `BLOCK`, `MFA_IF_CONFIGURED`, `MFA_REQUIRED` and `NO_ACTION`.
          */
         eventAction: pulumi.Input<string>;
+        /**
+         * Whether to send a notification.
+         */
         notify: pulumi.Input<boolean>;
     }
     interface RiskConfigurationAccountTakeoverRiskConfigurationActionsMediumAction {
@@ -12068,6 +12053,9 @@ export declare namespace cognito {
          * The action to take in response to the account takeover action. Valid values are `BLOCK`, `MFA_IF_CONFIGURED`, `MFA_REQUIRED` and `NO_ACTION`.
          */
         eventAction: pulumi.Input<string>;
+        /**
+         * Whether to send a notification.
+         */
         notify: pulumi.Input<boolean>;
     }
     interface RiskConfigurationAccountTakeoverRiskConfigurationNotifyConfiguration {
@@ -14625,7 +14613,7 @@ export declare namespace dlm {
          */
         eventSource?: pulumi.Input<inputs.dlm.LifecyclePolicyPolicyDetailsEventSource>;
         /**
-         * A set of optional parameters for snapshot and AMI lifecycle policies. See the `parameters` configuration block.
+         * Information about the event. See the `parameters` configuration block.
          */
         parameters?: pulumi.Input<inputs.dlm.LifecyclePolicyPolicyDetailsParameters>;
         /**
@@ -14647,7 +14635,7 @@ export declare namespace dlm {
         /**
          * A map of tag keys and their values. Any resources that match the `resourceTypes` and are tagged with _any_ of these tags will be targeted.
          *
-         * > Note: You cannot have overlapping lifecycle policies that share the same `targetTags`. TODO is unable to detect this at plan time but it will fail during apply.
+         * > Note: You cannot have overlapping lifecycle policies that share the same `targetTags`. Pulumi is unable to detect this at plan time but it will fail during apply.
          */
         targetTags?: pulumi.Input<{
             [key: string]: pulumi.Input<string>;
@@ -14679,11 +14667,11 @@ export declare namespace dlm {
     }
     interface LifecyclePolicyPolicyDetailsActionCrossRegionCopyEncryptionConfiguration {
         /**
-         * The Amazon Resource Name (ARN) of the AWS KMS key to use for EBS encryption. If this parameter is not specified, the default KMS key for the account is used.
+         * The Amazon Resource Name (ARN) of the AWS KMS customer master key (CMK) to use for EBS encryption. If this argument is not specified, the default KMS key for the account is used.
          */
         cmkArn?: pulumi.Input<string>;
         /**
-         * To encrypt a copy of an unencrypted snapshot when encryption by default is not enabled, enable encryption using this parameter. Copies of encrypted snapshots are encrypted, even if this parameter is false or when encryption by default is not enabled.
+         * To encrypt a copy of an unencrypted snapshot if encryption by default is not enabled, enable encryption using this parameter. Copies of encrypted snapshots are encrypted, even if this parameter is false or if encryption by default is not enabled.
          */
         encrypted?: pulumi.Input<boolean>;
     }
@@ -14699,7 +14687,7 @@ export declare namespace dlm {
     }
     interface LifecyclePolicyPolicyDetailsEventSource {
         /**
-         * A set of optional parameters for snapshot and AMI lifecycle policies. See the `parameters` configuration block.
+         * Information about the event. See the `parameters` configuration block.
          */
         parameters: pulumi.Input<inputs.dlm.LifecyclePolicyPolicyDetailsEventSourceParameters>;
         /**
@@ -14733,7 +14721,7 @@ export declare namespace dlm {
     }
     interface LifecyclePolicyPolicyDetailsSchedule {
         /**
-         * Copy all user-defined tags on a source volume to snapshots of the volume created by this policy.
+         * Whether to copy all user-defined tags from the source snapshot to the cross-region snapshot copy.
          */
         copyTags?: pulumi.Input<boolean>;
         /**
@@ -14745,7 +14733,7 @@ export declare namespace dlm {
          */
         crossRegionCopyRules?: pulumi.Input<pulumi.Input<inputs.dlm.LifecyclePolicyPolicyDetailsScheduleCrossRegionCopyRule>[]>;
         /**
-         * See the `deprecateRule` block. Max of 1 per schedule.
+         * The AMI deprecation rule for cross-Region AMI copies created by the rule. See the `deprecateRule` block.
          */
         deprecateRule?: pulumi.Input<inputs.dlm.LifecyclePolicyPolicyDetailsScheduleDeprecateRule>;
         /**
@@ -14801,19 +14789,19 @@ export declare namespace dlm {
     }
     interface LifecyclePolicyPolicyDetailsScheduleCrossRegionCopyRule {
         /**
-         * The Amazon Resource Name (ARN) of the AWS KMS key to use for EBS encryption. If this parameter is not specified, the default KMS key for the account is used.
+         * The Amazon Resource Name (ARN) of the AWS KMS customer master key (CMK) to use for EBS encryption. If this argument is not specified, the default KMS key for the account is used.
          */
         cmkArn?: pulumi.Input<string>;
         /**
-         * Copy all user-defined tags on a source volume to snapshots of the volume created by this policy.
+         * Whether to copy all user-defined tags from the source snapshot to the cross-region snapshot copy.
          */
         copyTags?: pulumi.Input<boolean>;
         /**
-         * See the `deprecateRule` block. Max of 1 per schedule.
+         * The AMI deprecation rule for cross-Region AMI copies created by the rule. See the `deprecateRule` block.
          */
         deprecateRule?: pulumi.Input<inputs.dlm.LifecyclePolicyPolicyDetailsScheduleCrossRegionCopyRuleDeprecateRule>;
         /**
-         * To encrypt a copy of an unencrypted snapshot when encryption by default is not enabled, enable encryption using this parameter. Copies of encrypted snapshots are encrypted, even if this parameter is false or when encryption by default is not enabled.
+         * To encrypt a copy of an unencrypted snapshot if encryption by default is not enabled, enable encryption using this parameter. Copies of encrypted snapshots are encrypted, even if this parameter is false or if encryption by default is not enabled.
          */
         encrypted: pulumi.Input<boolean>;
         /**
@@ -16202,91 +16190,91 @@ export declare namespace ec2 {
     }
     interface FleetLaunchTemplateConfigOverrideInstanceRequirementsAcceleratorCount {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * The maximum number of vCPUs. To specify no maximum limit, omit this parameter.
          */
         max?: pulumi.Input<number>;
         /**
-         * Minimum.
+         * The minimum number of vCPUs. To specify no minimum limit, specify `0`.
          */
         min?: pulumi.Input<number>;
     }
     interface FleetLaunchTemplateConfigOverrideInstanceRequirementsAcceleratorTotalMemoryMib {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * The maximum number of vCPUs. To specify no maximum limit, omit this parameter.
          */
         max?: pulumi.Input<number>;
         /**
-         * Minimum.
+         * The minimum number of vCPUs. To specify no minimum limit, specify `0`.
          */
         min?: pulumi.Input<number>;
     }
     interface FleetLaunchTemplateConfigOverrideInstanceRequirementsBaselineEbsBandwidthMbps {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * The maximum number of vCPUs. To specify no maximum limit, omit this parameter.
          */
         max?: pulumi.Input<number>;
         /**
-         * Minimum.
+         * The minimum number of vCPUs. To specify no minimum limit, specify `0`.
          */
         min?: pulumi.Input<number>;
     }
     interface FleetLaunchTemplateConfigOverrideInstanceRequirementsMemoryGibPerVcpu {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * The maximum number of vCPUs. To specify no maximum limit, omit this parameter.
          */
         max?: pulumi.Input<number>;
         /**
-         * Minimum.
+         * The minimum number of vCPUs. To specify no minimum limit, specify `0`.
          */
         min?: pulumi.Input<number>;
     }
     interface FleetLaunchTemplateConfigOverrideInstanceRequirementsMemoryMib {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * The maximum number of vCPUs. To specify no maximum limit, omit this parameter.
          */
         max?: pulumi.Input<number>;
         /**
-         * Minimum.
+         * The minimum number of vCPUs. To specify no minimum limit, specify `0`.
          */
         min: pulumi.Input<number>;
     }
     interface FleetLaunchTemplateConfigOverrideInstanceRequirementsNetworkBandwidthGbps {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * The maximum number of vCPUs. To specify no maximum limit, omit this parameter.
          */
         max?: pulumi.Input<number>;
         /**
-         * Minimum.
+         * The minimum number of vCPUs. To specify no minimum limit, specify `0`.
          */
         min?: pulumi.Input<number>;
     }
     interface FleetLaunchTemplateConfigOverrideInstanceRequirementsNetworkInterfaceCount {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * The maximum number of vCPUs. To specify no maximum limit, omit this parameter.
          */
         max?: pulumi.Input<number>;
         /**
-         * Minimum.
+         * The minimum number of vCPUs. To specify no minimum limit, specify `0`.
          */
         min?: pulumi.Input<number>;
     }
     interface FleetLaunchTemplateConfigOverrideInstanceRequirementsTotalLocalStorageGb {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * The maximum number of vCPUs. To specify no maximum limit, omit this parameter.
          */
         max?: pulumi.Input<number>;
         /**
-         * Minimum.
+         * The minimum number of vCPUs. To specify no minimum limit, specify `0`.
          */
         min?: pulumi.Input<number>;
     }
     interface FleetLaunchTemplateConfigOverrideInstanceRequirementsVcpuCount {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * The maximum number of vCPUs. To specify no maximum limit, omit this parameter.
          */
         max?: pulumi.Input<number>;
         /**
-         * Minimum.
+         * The minimum number of vCPUs. To specify no minimum limit, specify `0`.
          */
         min: pulumi.Input<number>;
     }
@@ -18112,7 +18100,7 @@ export declare namespace ec2 {
     }
     interface LaunchTemplateInstanceRequirementsAcceleratorCount {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * Maximum.
          */
         max?: pulumi.Input<number>;
         /**
@@ -18122,7 +18110,7 @@ export declare namespace ec2 {
     }
     interface LaunchTemplateInstanceRequirementsAcceleratorTotalMemoryMib {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * Maximum.
          */
         max?: pulumi.Input<number>;
         /**
@@ -18132,7 +18120,7 @@ export declare namespace ec2 {
     }
     interface LaunchTemplateInstanceRequirementsBaselineEbsBandwidthMbps {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * Maximum.
          */
         max?: pulumi.Input<number>;
         /**
@@ -18142,7 +18130,7 @@ export declare namespace ec2 {
     }
     interface LaunchTemplateInstanceRequirementsMemoryGibPerVcpu {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * Maximum.
          */
         max?: pulumi.Input<number>;
         /**
@@ -18152,7 +18140,7 @@ export declare namespace ec2 {
     }
     interface LaunchTemplateInstanceRequirementsMemoryMib {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * Maximum.
          */
         max?: pulumi.Input<number>;
         /**
@@ -18162,7 +18150,7 @@ export declare namespace ec2 {
     }
     interface LaunchTemplateInstanceRequirementsNetworkBandwidthGbps {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * Maximum.
          */
         max?: pulumi.Input<number>;
         /**
@@ -18172,7 +18160,7 @@ export declare namespace ec2 {
     }
     interface LaunchTemplateInstanceRequirementsNetworkInterfaceCount {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * Maximum.
          */
         max?: pulumi.Input<number>;
         /**
@@ -18182,7 +18170,7 @@ export declare namespace ec2 {
     }
     interface LaunchTemplateInstanceRequirementsTotalLocalStorageGb {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * Maximum.
          */
         max?: pulumi.Input<number>;
         /**
@@ -18192,7 +18180,7 @@ export declare namespace ec2 {
     }
     interface LaunchTemplateInstanceRequirementsVcpuCount {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * Maximum.
          */
         max?: pulumi.Input<number>;
         /**
@@ -19663,7 +19651,7 @@ export declare namespace ec2 {
     }
     interface SpotFleetRequestLaunchTemplateConfigOverrideInstanceRequirementsAcceleratorCount {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * Maximum.
          */
         max?: pulumi.Input<number>;
         /**
@@ -19673,7 +19661,7 @@ export declare namespace ec2 {
     }
     interface SpotFleetRequestLaunchTemplateConfigOverrideInstanceRequirementsAcceleratorTotalMemoryMib {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * Maximum.
          */
         max?: pulumi.Input<number>;
         /**
@@ -19683,7 +19671,7 @@ export declare namespace ec2 {
     }
     interface SpotFleetRequestLaunchTemplateConfigOverrideInstanceRequirementsBaselineEbsBandwidthMbps {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * Maximum.
          */
         max?: pulumi.Input<number>;
         /**
@@ -19693,7 +19681,7 @@ export declare namespace ec2 {
     }
     interface SpotFleetRequestLaunchTemplateConfigOverrideInstanceRequirementsMemoryGibPerVcpu {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * Maximum.
          */
         max?: pulumi.Input<number>;
         /**
@@ -19703,7 +19691,7 @@ export declare namespace ec2 {
     }
     interface SpotFleetRequestLaunchTemplateConfigOverrideInstanceRequirementsMemoryMib {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * Maximum.
          */
         max?: pulumi.Input<number>;
         /**
@@ -19713,7 +19701,7 @@ export declare namespace ec2 {
     }
     interface SpotFleetRequestLaunchTemplateConfigOverrideInstanceRequirementsNetworkBandwidthGbps {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * Maximum.
          */
         max?: pulumi.Input<number>;
         /**
@@ -19723,7 +19711,7 @@ export declare namespace ec2 {
     }
     interface SpotFleetRequestLaunchTemplateConfigOverrideInstanceRequirementsNetworkInterfaceCount {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * Maximum.
          */
         max?: pulumi.Input<number>;
         /**
@@ -19733,7 +19721,7 @@ export declare namespace ec2 {
     }
     interface SpotFleetRequestLaunchTemplateConfigOverrideInstanceRequirementsTotalLocalStorageGb {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * Maximum.
          */
         max?: pulumi.Input<number>;
         /**
@@ -19743,7 +19731,7 @@ export declare namespace ec2 {
     }
     interface SpotFleetRequestLaunchTemplateConfigOverrideInstanceRequirementsVcpuCount {
         /**
-         * Maximum. Set to `0` to exclude instance types with accelerators.
+         * Maximum.
          */
         max?: pulumi.Input<number>;
         /**
@@ -25292,11 +25280,11 @@ export declare namespace glue {
     }
     interface CrawlerS3Target {
         /**
-         * The name of the connection to use to connect to the JDBC target.
+         * The name of the connection for an Amazon S3-backed Data Catalog table to be a target of the crawl when using a Catalog connection type paired with a `NETWORK` Connection type.
          */
         connectionName?: pulumi.Input<string>;
         /**
-         * The ARN of the dead-letter SQS queue.
+         * A valid Amazon SQS ARN.
          *
          * > **Note:** `deletionBehavior` of catalog target doesn't support `DEPRECATE_IN_DATABASE`.
          *
@@ -25304,7 +25292,7 @@ export declare namespace glue {
          */
         dlqEventQueueArn?: pulumi.Input<string>;
         /**
-         * The ARN of the SQS queue to receive S3 notifications from.
+         * A valid Amazon SQS ARN.
          */
         eventQueueArn?: pulumi.Input<string>;
         /**
@@ -27315,8 +27303,6 @@ export declare namespace iot {
     interface TopicRuleDynamodbv2PutItem {
         /**
          * The name of the DynamoDB table.
-         *
-         * The `dynamodbv2` object takes the following arguments:
          */
         tableName: pulumi.Input<string>;
     }
@@ -27472,8 +27458,6 @@ export declare namespace iot {
     interface TopicRuleErrorActionDynamodbv2PutItem {
         /**
          * The name of the DynamoDB table.
-         *
-         * The `dynamodbv2` object takes the following arguments:
          */
         tableName: pulumi.Input<string>;
     }
@@ -29156,7 +29140,6 @@ export declare namespace kinesis {
         bufferingInterval?: pulumi.Input<number>;
         /**
          * Buffer incoming data to the specified size, in MBs between 1 to 100, before delivering it to the destination.  The default value is 5MB.
-         * We recommend setting SizeInMBs to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MB/sec set SizeInMBs to be 10 MB or higher.
          */
         bufferingSize?: pulumi.Input<number>;
         /**
@@ -29181,7 +29164,7 @@ export declare namespace kinesis {
          */
         prefix?: pulumi.Input<string>;
         /**
-         * The ARN of the role that provides access to the source Kinesis stream.
+         * The ARN of the role used to access the Amazon MSK cluster.
          */
         roleArn: pulumi.Input<string>;
     }
@@ -29225,7 +29208,6 @@ export declare namespace kinesis {
         bufferingInterval?: pulumi.Input<number>;
         /**
          * Buffer incoming data to the specified size, in MBs between 1 to 100, before delivering it to the destination.  The default value is 5MB.
-         * We recommend setting SizeInMBs to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MB/sec set SizeInMBs to be 10 MB or higher.
          */
         bufferingSize?: pulumi.Input<number>;
         /**
@@ -29262,7 +29244,7 @@ export declare namespace kinesis {
          */
         processingConfiguration?: pulumi.Input<inputs.kinesis.FirehoseDeliveryStreamExtendedS3ConfigurationProcessingConfiguration>;
         /**
-         * The ARN of the role that provides access to the source Kinesis stream.
+         * The ARN of the role used to access the Amazon MSK cluster.
          */
         roleArn: pulumi.Input<string>;
         /**
@@ -29270,7 +29252,7 @@ export declare namespace kinesis {
          */
         s3BackupConfiguration?: pulumi.Input<inputs.kinesis.FirehoseDeliveryStreamExtendedS3ConfigurationS3BackupConfiguration>;
         /**
-         * The Amazon S3 backup mode.  Valid values are `Disabled` and `Enabled`.  Default value is `Disabled`.
+         * Defines how documents should be delivered to Amazon S3.  Valid values are `FailedDocumentsOnly` and `AllDocuments`.  Default value is `FailedDocumentsOnly`.
          */
         s3BackupMode?: pulumi.Input<string>;
     }
@@ -29509,7 +29491,6 @@ export declare namespace kinesis {
         bufferingInterval?: pulumi.Input<number>;
         /**
          * Buffer incoming data to the specified size, in MBs between 1 to 100, before delivering it to the destination.  The default value is 5MB.
-         * We recommend setting SizeInMBs to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MB/sec set SizeInMBs to be 10 MB or higher.
          */
         bufferingSize?: pulumi.Input<number>;
         /**
@@ -29534,7 +29515,7 @@ export declare namespace kinesis {
          */
         prefix?: pulumi.Input<string>;
         /**
-         * The ARN of the role that provides access to the source Kinesis stream.
+         * The ARN of the role used to access the Amazon MSK cluster.
          */
         roleArn: pulumi.Input<string>;
     }
@@ -29679,7 +29660,6 @@ export declare namespace kinesis {
         bufferingInterval?: pulumi.Input<number>;
         /**
          * Buffer incoming data to the specified size, in MBs between 1 to 100, before delivering it to the destination.  The default value is 5MB.
-         * We recommend setting SizeInMBs to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MB/sec set SizeInMBs to be 10 MB or higher.
          */
         bufferingSize?: pulumi.Input<number>;
         /**
@@ -29704,7 +29684,7 @@ export declare namespace kinesis {
          */
         prefix?: pulumi.Input<string>;
         /**
-         * The ARN of the role that provides access to the source Kinesis stream.
+         * The ARN of the role used to access the Amazon MSK cluster.
          */
         roleArn: pulumi.Input<string>;
     }
@@ -29871,7 +29851,6 @@ export declare namespace kinesis {
         bufferingInterval?: pulumi.Input<number>;
         /**
          * Buffer incoming data to the specified size, in MBs between 1 to 100, before delivering it to the destination.  The default value is 5MB.
-         * We recommend setting SizeInMBs to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MB/sec set SizeInMBs to be 10 MB or higher.
          */
         bufferingSize?: pulumi.Input<number>;
         /**
@@ -29896,7 +29875,7 @@ export declare namespace kinesis {
          */
         prefix?: pulumi.Input<string>;
         /**
-         * The ARN of the role that provides access to the source Kinesis stream.
+         * The ARN of the role used to access the Amazon MSK cluster.
          */
         roleArn: pulumi.Input<string>;
     }
@@ -30032,7 +30011,6 @@ export declare namespace kinesis {
         bufferingInterval?: pulumi.Input<number>;
         /**
          * Buffer incoming data to the specified size, in MBs between 1 to 100, before delivering it to the destination.  The default value is 5MB.
-         * We recommend setting SizeInMBs to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MB/sec set SizeInMBs to be 10 MB or higher.
          */
         bufferingSize?: pulumi.Input<number>;
         /**
@@ -30057,7 +30035,7 @@ export declare namespace kinesis {
          */
         prefix?: pulumi.Input<string>;
         /**
-         * The ARN of the role that provides access to the source Kinesis stream.
+         * The ARN of the role used to access the Amazon MSK cluster.
          */
         roleArn: pulumi.Input<string>;
     }
@@ -30201,7 +30179,6 @@ export declare namespace kinesis {
         bufferingInterval?: pulumi.Input<number>;
         /**
          * Buffer incoming data to the specified size, in MBs between 1 to 100, before delivering it to the destination.  The default value is 5MB.
-         * We recommend setting SizeInMBs to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MB/sec set SizeInMBs to be 10 MB or higher.
          */
         bufferingSize?: pulumi.Input<number>;
         /**
@@ -30226,7 +30203,7 @@ export declare namespace kinesis {
          */
         prefix?: pulumi.Input<string>;
         /**
-         * The ARN of the role that provides access to the source Kinesis stream.
+         * The ARN of the role used to access the Amazon MSK cluster.
          */
         roleArn: pulumi.Input<string>;
     }
@@ -30255,7 +30232,6 @@ export declare namespace kinesis {
         bufferingInterval?: pulumi.Input<number>;
         /**
          * Buffer incoming data to the specified size, in MBs between 1 to 100, before delivering it to the destination.  The default value is 5MB.
-         * We recommend setting SizeInMBs to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MB/sec set SizeInMBs to be 10 MB or higher.
          */
         bufferingSize?: pulumi.Input<number>;
         /**
@@ -30280,7 +30256,7 @@ export declare namespace kinesis {
          */
         prefix?: pulumi.Input<string>;
         /**
-         * The ARN of the role that provides access to the source Kinesis stream.
+         * The ARN of the role used to access the Amazon MSK cluster.
          */
         roleArn: pulumi.Input<string>;
     }
@@ -30409,7 +30385,6 @@ export declare namespace kinesis {
         bufferingInterval?: pulumi.Input<number>;
         /**
          * Buffer incoming data to the specified size, in MBs between 1 to 100, before delivering it to the destination.  The default value is 5MB.
-         * We recommend setting SizeInMBs to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MB/sec set SizeInMBs to be 10 MB or higher.
          */
         bufferingSize?: pulumi.Input<number>;
         /**
@@ -30434,7 +30409,7 @@ export declare namespace kinesis {
          */
         prefix?: pulumi.Input<string>;
         /**
-         * The ARN of the role that provides access to the source Kinesis stream.
+         * The ARN of the role used to access the Amazon MSK cluster.
          */
         roleArn: pulumi.Input<string>;
     }
@@ -32115,9 +32090,6 @@ export declare namespace lb {
     interface ListenerRuleConditionHostHeader {
         /**
          * List of header value patterns to match. Maximum size of each pattern is 128 characters. Comparison is case insensitive. Wildcard characters supported: * (matches 0 or more characters) and ? (matches exactly 1 character). If the same header appears multiple times in the request they will be searched in order until a match is found. Only one pattern needs to match for the condition to be satisfied. To require that all of the strings are a match, create one condition block per string.
-         *
-         *
-         * Query String Value Blocks (for `query_string.values`) support the following:
          */
         values: pulumi.Input<pulumi.Input<string>[]>;
     }
@@ -32134,18 +32106,12 @@ export declare namespace lb {
     interface ListenerRuleConditionHttpRequestMethod {
         /**
          * List of header value patterns to match. Maximum size of each pattern is 128 characters. Comparison is case insensitive. Wildcard characters supported: * (matches 0 or more characters) and ? (matches exactly 1 character). If the same header appears multiple times in the request they will be searched in order until a match is found. Only one pattern needs to match for the condition to be satisfied. To require that all of the strings are a match, create one condition block per string.
-         *
-         *
-         * Query String Value Blocks (for `query_string.values`) support the following:
          */
         values: pulumi.Input<pulumi.Input<string>[]>;
     }
     interface ListenerRuleConditionPathPattern {
         /**
          * List of header value patterns to match. Maximum size of each pattern is 128 characters. Comparison is case insensitive. Wildcard characters supported: * (matches 0 or more characters) and ? (matches exactly 1 character). If the same header appears multiple times in the request they will be searched in order until a match is found. Only one pattern needs to match for the condition to be satisfied. To require that all of the strings are a match, create one condition block per string.
-         *
-         *
-         * Query String Value Blocks (for `query_string.values`) support the following:
          */
         values: pulumi.Input<pulumi.Input<string>[]>;
     }
@@ -32162,9 +32128,6 @@ export declare namespace lb {
     interface ListenerRuleConditionSourceIp {
         /**
          * List of header value patterns to match. Maximum size of each pattern is 128 characters. Comparison is case insensitive. Wildcard characters supported: * (matches 0 or more characters) and ? (matches exactly 1 character). If the same header appears multiple times in the request they will be searched in order until a match is found. Only one pattern needs to match for the condition to be satisfied. To require that all of the strings are a match, create one condition block per string.
-         *
-         *
-         * Query String Value Blocks (for `query_string.values`) support the following:
          */
         values: pulumi.Input<pulumi.Input<string>[]>;
     }
@@ -32270,13 +32233,16 @@ export declare namespace lb {
 }
 export declare namespace lex {
     interface BotAbortStatement {
+        /**
+         * A set of messages, each of which provides a message string and its type.
+         * You can specify the message string in plain text or in Speech Synthesis Markup Language (SSML).
+         * Attributes are documented under message.
+         */
         messages: pulumi.Input<pulumi.Input<inputs.lex.BotAbortStatementMessage>[]>;
         /**
          * The response card. Amazon Lex will substitute session attributes and
          * slot values into the response card. For more information, see
          * [Example: Using a Response Card](https://docs.aws.amazon.com/lex/latest/dg/ex-resp-card.html).
-         * slot values into the response card. For more information, see
-         * [Example: Using a Response Card](https://docs.aws.amazon.com/lex/latest/dg/ex-resp-card.html).
          */
         responseCard?: pulumi.Input<string>;
     }
@@ -32332,13 +32298,16 @@ export declare namespace lex {
          * The number of times to prompt the user for information.
          */
         maxAttempts: pulumi.Input<number>;
+        /**
+         * A set of messages, each of which provides a message string and its type.
+         * You can specify the message string in plain text or in Speech Synthesis Markup Language (SSML).
+         * Attributes are documented under message.
+         */
         messages: pulumi.Input<pulumi.Input<inputs.lex.BotClarificationPromptMessage>[]>;
         /**
          * The response card. Amazon Lex will substitute session attributes and
          * slot values into the response card. For more information, see
          * [Example: Using a Response Card](https://docs.aws.amazon.com/lex/latest/dg/ex-resp-card.html).
-         * slot values into the response card. For more information, see
-         * [Example: Using a Response Card](https://docs.aws.amazon.com/lex/latest/dg/ex-resp-card.html).
          */
         responseCard?: pulumi.Input<string>;
     }
@@ -32368,15 +32337,16 @@ export declare namespace lex {
         intentVersion: pulumi.Input<string>;
     }
     interface IntentConclusionStatement {
+        /**
+         * A set of messages, each of which provides a message string and its type.
+         * You can specify the message string in plain text or in Speech Synthesis Markup Language (SSML).
+         * Attributes are documented under message. Must contain between 1 and 15 messages.
+         */
         messages: pulumi.Input<pulumi.Input<inputs.lex.IntentConclusionStatementMessage>[]>;
         /**
          * The response card. Amazon Lex will substitute session attributes and
          * slot values into the response card. For more information, see
          * [Example: Using a Response Card](https://docs.aws.amazon.com/lex/latest/dg/ex-resp-card.html). Must be less than or equal to 50000 characters in length.
-         * slot values into the response card. For more information, see
-         * [Example: Using a Response Card](https://docs.aws.amazon.com/lex/latest/dg/ex-resp-card.html). Must be less than or equal to 50000 characters in length.
-         * slot values into the response card. For more information, see
-         * [Example: Using a Response Card](https://docs.aws.amazon.com/lex/latest/dg/ex-resp-card.html). Must be less than or equal to 50000 characters in length.
          */
         responseCard?: pulumi.Input<string>;
     }
@@ -32400,15 +32370,16 @@ export declare namespace lex {
          * The number of times to prompt the user for information. Must be a number between 1 and 5 (inclusive).
          */
         maxAttempts: pulumi.Input<number>;
+        /**
+         * A set of messages, each of which provides a message string and its type.
+         * You can specify the message string in plain text or in Speech Synthesis Markup Language (SSML).
+         * Attributes are documented under message. Must contain between 1 and 15 messages.
+         */
         messages: pulumi.Input<pulumi.Input<inputs.lex.IntentConfirmationPromptMessage>[]>;
         /**
          * The response card. Amazon Lex will substitute session attributes and
          * slot values into the response card. For more information, see
          * [Example: Using a Response Card](https://docs.aws.amazon.com/lex/latest/dg/ex-resp-card.html). Must be less than or equal to 50000 characters in length.
-         * slot values into the response card. For more information, see
-         * [Example: Using a Response Card](https://docs.aws.amazon.com/lex/latest/dg/ex-resp-card.html). Must be less than or equal to 50000 characters in length.
-         * slot values into the response card. For more information, see
-         * [Example: Using a Response Card](https://docs.aws.amazon.com/lex/latest/dg/ex-resp-card.html). Must be less than or equal to 50000 characters in length.
          */
         responseCard?: pulumi.Input<string>;
     }
@@ -32485,15 +32456,16 @@ export declare namespace lex {
         groupNumber?: pulumi.Input<number>;
     }
     interface IntentFollowUpPromptRejectionStatement {
+        /**
+         * A set of messages, each of which provides a message string and its type.
+         * You can specify the message string in plain text or in Speech Synthesis Markup Language (SSML).
+         * Attributes are documented under message. Must contain between 1 and 15 messages.
+         */
         messages: pulumi.Input<pulumi.Input<inputs.lex.IntentFollowUpPromptRejectionStatementMessage>[]>;
         /**
          * The response card. Amazon Lex will substitute session attributes and
          * slot values into the response card. For more information, see
          * [Example: Using a Response Card](https://docs.aws.amazon.com/lex/latest/dg/ex-resp-card.html). Must be less than or equal to 50000 characters in length.
-         * slot values into the response card. For more information, see
-         * [Example: Using a Response Card](https://docs.aws.amazon.com/lex/latest/dg/ex-resp-card.html). Must be less than or equal to 50000 characters in length.
-         * slot values into the response card. For more information, see
-         * [Example: Using a Response Card](https://docs.aws.amazon.com/lex/latest/dg/ex-resp-card.html). Must be less than or equal to 50000 characters in length.
          */
         responseCard?: pulumi.Input<string>;
     }
@@ -32537,15 +32509,16 @@ export declare namespace lex {
         uri: pulumi.Input<string>;
     }
     interface IntentRejectionStatement {
+        /**
+         * A set of messages, each of which provides a message string and its type.
+         * You can specify the message string in plain text or in Speech Synthesis Markup Language (SSML).
+         * Attributes are documented under message. Must contain between 1 and 15 messages.
+         */
         messages: pulumi.Input<pulumi.Input<inputs.lex.IntentRejectionStatementMessage>[]>;
         /**
          * The response card. Amazon Lex will substitute session attributes and
          * slot values into the response card. For more information, see
          * [Example: Using a Response Card](https://docs.aws.amazon.com/lex/latest/dg/ex-resp-card.html). Must be less than or equal to 50000 characters in length.
-         * slot values into the response card. For more information, see
-         * [Example: Using a Response Card](https://docs.aws.amazon.com/lex/latest/dg/ex-resp-card.html). Must be less than or equal to 50000 characters in length.
-         * slot values into the response card. For more information, see
-         * [Example: Using a Response Card](https://docs.aws.amazon.com/lex/latest/dg/ex-resp-card.html). Must be less than or equal to 50000 characters in length.
          */
         responseCard?: pulumi.Input<string>;
     }
@@ -32616,15 +32589,16 @@ export declare namespace lex {
          * The number of times to prompt the user for information. Must be a number between 1 and 5 (inclusive).
          */
         maxAttempts: pulumi.Input<number>;
+        /**
+         * A set of messages, each of which provides a message string and its type.
+         * You can specify the message string in plain text or in Speech Synthesis Markup Language (SSML).
+         * Attributes are documented under message. Must contain between 1 and 15 messages.
+         */
         messages: pulumi.Input<pulumi.Input<inputs.lex.IntentSlotValueElicitationPromptMessage>[]>;
         /**
          * The response card. Amazon Lex will substitute session attributes and
          * slot values into the response card. For more information, see
          * [Example: Using a Response Card](https://docs.aws.amazon.com/lex/latest/dg/ex-resp-card.html). Must be less than or equal to 50000 characters in length.
-         * slot values into the response card. For more information, see
-         * [Example: Using a Response Card](https://docs.aws.amazon.com/lex/latest/dg/ex-resp-card.html). Must be less than or equal to 50000 characters in length.
-         * slot values into the response card. For more information, see
-         * [Example: Using a Response Card](https://docs.aws.amazon.com/lex/latest/dg/ex-resp-card.html). Must be less than or equal to 50000 characters in length.
          */
         responseCard?: pulumi.Input<string>;
     }
@@ -33192,7 +33166,7 @@ export declare namespace macie2 {
     }
     interface ClassificationJobS3JobDefinitionBucketCriteriaIncludes {
         /**
-         * An array of conditions, one for each condition that determines which S3 buckets to include or exclude from the job. (documented below)
+         * An array of conditions, one for each condition that determines which objects to include or exclude from the job. (documented below)
          */
         ands?: pulumi.Input<pulumi.Input<inputs.macie2.ClassificationJobS3JobDefinitionBucketCriteriaIncludesAnd>[]>;
     }
@@ -33320,7 +33294,7 @@ export declare namespace macie2 {
     }
     interface ClassificationJobS3JobDefinitionScopingIncludes {
         /**
-         * An array of conditions, one for each condition that determines which S3 buckets to include or exclude from the job. (documented below)
+         * An array of conditions, one for each condition that determines which objects to include or exclude from the job. (documented below)
          */
         ands?: pulumi.Input<pulumi.Input<inputs.macie2.ClassificationJobS3JobDefinitionScopingIncludesAnd>[]>;
     }
@@ -34169,7 +34143,7 @@ export declare namespace medialive {
          */
         uri: pulumi.Input<string>;
         /**
-         * Username for destination.
+         * . Username to be used.
          */
         username?: pulumi.Input<string>;
     }
@@ -34478,7 +34452,7 @@ export declare namespace medialive {
          */
         uri: pulumi.Input<string>;
         /**
-         * Username for destination.
+         * . Username to be used.
          */
         username?: pulumi.Input<string>;
     }
@@ -34739,7 +34713,7 @@ export declare namespace medialive {
          */
         uri: pulumi.Input<string>;
         /**
-         * Username for destination.
+         * . Username to be used.
          */
         username?: pulumi.Input<string>;
     }
@@ -35019,7 +34993,7 @@ export declare namespace medialive {
          */
         entropyEncoding?: pulumi.Input<string>;
         /**
-         * Filters to apply to an encode. See H264 Filter Settings for more details.
+         * Filters to apply to an encode. See H265 Filter Settings for more details.
          */
         filterSettings?: pulumi.Input<inputs.medialive.ChannelEncoderSettingsVideoDescriptionCodecSettingsH264SettingsFilterSettings>;
         /**
@@ -35064,7 +35038,7 @@ export declare namespace medialive {
          */
         gopSizeUnits?: pulumi.Input<string>;
         /**
-         * H264 level.
+         * H265 level.
          */
         level?: pulumi.Input<string>;
         /**
@@ -35191,7 +35165,7 @@ export declare namespace medialive {
          */
         colorSpaceSettings?: pulumi.Input<inputs.medialive.ChannelEncoderSettingsVideoDescriptionCodecSettingsH265SettingsColorSpaceSettings>;
         /**
-         * Filters to apply to an encode. See H264 Filter Settings for more details.
+         * Filters to apply to an encode. See H265 Filter Settings for more details.
          */
         filterSettings?: pulumi.Input<inputs.medialive.ChannelEncoderSettingsVideoDescriptionCodecSettingsH265SettingsFilterSettings>;
         /**
@@ -35220,7 +35194,7 @@ export declare namespace medialive {
          */
         gopSizeUnits?: pulumi.Input<string>;
         /**
-         * H264 level.
+         * H265 level.
          */
         level?: pulumi.Input<string>;
         /**
@@ -35402,7 +35376,7 @@ export declare namespace medialive {
     }
     interface ChannelInputAttachmentAutomaticInputFailoverSettingsFailoverConditionFailoverConditionSettingsAudioSilenceSettings {
         /**
-         * The name of the audio selector in the input that MediaLive should monitor to detect silence. Select your most important rendition. If you didn't create an audio selector in this input, leave blank.
+         * The name of the audio selector used as the source for this AudioDescription.
          */
         audioSelectorName: pulumi.Input<string>;
         /**
@@ -36187,11 +36161,11 @@ export declare namespace msk {
     }
     interface ClusterBrokerNodeGroupInfoConnectivityInfoVpcConnectivityClientAuthenticationSasl {
         /**
-         * Enables SASL/IAM authentication for VPC connectivity.
+         * Enables IAM client authentication. Defaults to `false`.
          */
         iam?: pulumi.Input<boolean>;
         /**
-         * Enables SASL/SCRAM authentication for VPC connectivity.
+         * Enables SCRAM client authentication via AWS Secrets Manager. Defaults to `false`.
          */
         scram?: pulumi.Input<boolean>;
     }
@@ -36237,11 +36211,11 @@ export declare namespace msk {
     }
     interface ClusterClientAuthenticationSasl {
         /**
-         * Enables SASL/IAM authentication for VPC connectivity.
+         * Enables IAM client authentication. Defaults to `false`.
          */
         iam?: pulumi.Input<boolean>;
         /**
-         * Enables SASL/SCRAM authentication for VPC connectivity.
+         * Enables SCRAM client authentication via AWS Secrets Manager. Defaults to `false`.
          */
         scram?: pulumi.Input<boolean>;
     }
@@ -36344,13 +36318,13 @@ export declare namespace msk {
     }
     interface ClusterOpenMonitoringPrometheusJmxExporter {
         /**
-         * Indicates whether you want to enable or disable the JMX Exporter.
+         * Indicates whether you want to enable or disable the Node Exporter.
          */
         enabledInBroker: pulumi.Input<boolean>;
     }
     interface ClusterOpenMonitoringPrometheusNodeExporter {
         /**
-         * Indicates whether you want to enable or disable the JMX Exporter.
+         * Indicates whether you want to enable or disable the Node Exporter.
          */
         enabledInBroker: pulumi.Input<boolean>;
     }
@@ -39300,7 +39274,7 @@ export declare namespace pipes {
     }
     interface PipeSourceParametersActivemqBrokerParametersCredentials {
         /**
-         * The ARN of the Secrets Manager secret containing the basic auth credentials.
+         * The ARN of the Secrets Manager secret containing the credentials.
          */
         basicAuth: pulumi.Input<string>;
     }
@@ -39460,7 +39434,7 @@ export declare namespace pipes {
     }
     interface PipeSourceParametersRabbitmqBrokerParametersCredentials {
         /**
-         * The ARN of the Secrets Manager secret containing the basic auth credentials.
+         * The ARN of the Secrets Manager secret containing the credentials.
          */
         basicAuth: pulumi.Input<string>;
     }
@@ -39504,7 +39478,7 @@ export declare namespace pipes {
     }
     interface PipeSourceParametersSelfManagedKafkaParametersCredentials {
         /**
-         * The ARN of the Secrets Manager secret containing the basic auth credentials.
+         * The ARN of the Secrets Manager secret containing the credentials.
          */
         basicAuth: pulumi.Input<string>;
         /**
@@ -39630,11 +39604,11 @@ export declare namespace pipes {
     }
     interface PipeTargetParametersBatchJobParametersContainerOverrides {
         /**
-         * List of commands to send to the container that overrides the default command from the Docker image or the task definition.
+         * List of commands to send to the container that overrides the default command from the Docker image or the task definition. You must also specify a container name.
          */
         commands?: pulumi.Input<pulumi.Input<string>[]>;
         /**
-         * The environment variables to send to the container. You can add new environment variables, which are added to the container at launch, or you can override the existing environment variables from the Docker image or the task definition. Environment variables cannot start with " AWS Batch ". This naming convention is reserved for variables that AWS Batch sets. Detailed below.
+         * The environment variables to send to the container. You can add new environment variables, which are added to the container at launch, or you can override the existing environment variables from the Docker image or the task definition. You must also specify a container name. Detailed below.
          */
         environments?: pulumi.Input<pulumi.Input<inputs.pipes.PipeTargetParametersBatchJobParametersContainerOverridesEnvironment>[]>;
         /**
@@ -39642,7 +39616,7 @@ export declare namespace pipes {
          */
         instanceType?: pulumi.Input<string>;
         /**
-         * The type and amount of resources to assign to a container. This overrides the settings in the job definition. The supported resources include GPU, MEMORY, and VCPU. Detailed below.
+         * The type and amount of a resource to assign to a container, instead of the default value from the task definition. The only supported resource is a GPU. Detailed below.
          */
         resourceRequirements?: pulumi.Input<pulumi.Input<inputs.pipes.PipeTargetParametersBatchJobParametersContainerOverridesResourceRequirement>[]>;
     }
@@ -39652,17 +39626,17 @@ export declare namespace pipes {
          */
         name?: pulumi.Input<string>;
         /**
-         * The value of the key-value pair. For environment variables, this is the value of the environment variable.
+         * Value of parameter to start execution of a SageMaker Model Building Pipeline. Maximum length of 1024.
          */
         value?: pulumi.Input<string>;
     }
     interface PipeTargetParametersBatchJobParametersContainerOverridesResourceRequirement {
         /**
-         * The type of resource to assign to a container. The supported resources include GPU, MEMORY, and VCPU.
+         * The type of placement strategy. The random placement strategy randomly places tasks on available candidates. The spread placement strategy spreads placement across available candidates evenly based on the field parameter. The binpack strategy places tasks on available candidates that have the least available amount of the resource that is specified with the field parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory (but still enough to run the task). Valid Values: random, spread, binpack.
          */
         type: pulumi.Input<string>;
         /**
-         * The value of the key-value pair. For environment variables, this is the value of the environment variable.
+         * Value of parameter to start execution of a SageMaker Model Building Pipeline. Maximum length of 1024.
          */
         value: pulumi.Input<string>;
     }
@@ -39672,7 +39646,7 @@ export declare namespace pipes {
          */
         jobId?: pulumi.Input<string>;
         /**
-         * The type of resource to assign to a container. The supported resources include GPU, MEMORY, and VCPU.
+         * The type of placement strategy. The random placement strategy randomly places tasks on available candidates. The spread placement strategy spreads placement across available candidates evenly based on the field parameter. The binpack strategy places tasks on available candidates that have the least available amount of the resource that is specified with the field parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory (but still enough to run the task). Valid Values: random, spread, binpack.
          */
         type?: pulumi.Input<string>;
     }
@@ -39796,7 +39770,7 @@ export declare namespace pipes {
          */
         containerOverrides?: pulumi.Input<pulumi.Input<inputs.pipes.PipeTargetParametersEcsTaskParametersOverridesContainerOverride>[]>;
         /**
-         * The cpu override for the task.
+         * The number of cpu units reserved for the container, instead of the default value from the task definition. You must also specify a container name.
          */
         cpu?: pulumi.Input<string>;
         /**
@@ -39812,7 +39786,7 @@ export declare namespace pipes {
          */
         inferenceAcceleratorOverrides?: pulumi.Input<pulumi.Input<inputs.pipes.PipeTargetParametersEcsTaskParametersOverridesInferenceAcceleratorOverride>[]>;
         /**
-         * The memory override for the task.
+         * The hard limit (in MiB) of memory to present to the container, instead of the default value from the task definition. If your container attempts to exceed the memory specified here, the container is killed. You must also specify a container name.
          */
         memory?: pulumi.Input<string>;
         /**
@@ -39822,11 +39796,11 @@ export declare namespace pipes {
     }
     interface PipeTargetParametersEcsTaskParametersOverridesContainerOverride {
         /**
-         * List of commands to send to the container that overrides the default command from the Docker image or the task definition.
+         * List of commands to send to the container that overrides the default command from the Docker image or the task definition. You must also specify a container name.
          */
         commands?: pulumi.Input<pulumi.Input<string>[]>;
         /**
-         * The cpu override for the task.
+         * The number of cpu units reserved for the container, instead of the default value from the task definition. You must also specify a container name.
          */
         cpu?: pulumi.Input<number>;
         /**
@@ -39834,11 +39808,11 @@ export declare namespace pipes {
          */
         environmentFiles?: pulumi.Input<pulumi.Input<inputs.pipes.PipeTargetParametersEcsTaskParametersOverridesContainerOverrideEnvironmentFile>[]>;
         /**
-         * The environment variables to send to the container. You can add new environment variables, which are added to the container at launch, or you can override the existing environment variables from the Docker image or the task definition. Environment variables cannot start with " AWS Batch ". This naming convention is reserved for variables that AWS Batch sets. Detailed below.
+         * The environment variables to send to the container. You can add new environment variables, which are added to the container at launch, or you can override the existing environment variables from the Docker image or the task definition. You must also specify a container name. Detailed below.
          */
         environments?: pulumi.Input<pulumi.Input<inputs.pipes.PipeTargetParametersEcsTaskParametersOverridesContainerOverrideEnvironment>[]>;
         /**
-         * The memory override for the task.
+         * The hard limit (in MiB) of memory to present to the container, instead of the default value from the task definition. If your container attempts to exceed the memory specified here, the container is killed. You must also specify a container name.
          */
         memory?: pulumi.Input<number>;
         /**
@@ -39850,7 +39824,7 @@ export declare namespace pipes {
          */
         name?: pulumi.Input<string>;
         /**
-         * The type and amount of resources to assign to a container. This overrides the settings in the job definition. The supported resources include GPU, MEMORY, and VCPU. Detailed below.
+         * The type and amount of a resource to assign to a container, instead of the default value from the task definition. The only supported resource is a GPU. Detailed below.
          */
         resourceRequirements?: pulumi.Input<pulumi.Input<inputs.pipes.PipeTargetParametersEcsTaskParametersOverridesContainerOverrideResourceRequirement>[]>;
     }
@@ -39860,27 +39834,27 @@ export declare namespace pipes {
          */
         name?: pulumi.Input<string>;
         /**
-         * The value of the key-value pair. For environment variables, this is the value of the environment variable.
+         * Value of parameter to start execution of a SageMaker Model Building Pipeline. Maximum length of 1024.
          */
         value?: pulumi.Input<string>;
     }
     interface PipeTargetParametersEcsTaskParametersOverridesContainerOverrideEnvironmentFile {
         /**
-         * The type of resource to assign to a container. The supported resources include GPU, MEMORY, and VCPU.
+         * The type of placement strategy. The random placement strategy randomly places tasks on available candidates. The spread placement strategy spreads placement across available candidates evenly based on the field parameter. The binpack strategy places tasks on available candidates that have the least available amount of the resource that is specified with the field parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory (but still enough to run the task). Valid Values: random, spread, binpack.
          */
         type: pulumi.Input<string>;
         /**
-         * The value of the key-value pair. For environment variables, this is the value of the environment variable.
+         * Value of parameter to start execution of a SageMaker Model Building Pipeline. Maximum length of 1024.
          */
         value: pulumi.Input<string>;
     }
     interface PipeTargetParametersEcsTaskParametersOverridesContainerOverrideResourceRequirement {
         /**
-         * The type of resource to assign to a container. The supported resources include GPU, MEMORY, and VCPU.
+         * The type of placement strategy. The random placement strategy randomly places tasks on available candidates. The spread placement strategy spreads placement across available candidates evenly based on the field parameter. The binpack strategy places tasks on available candidates that have the least available amount of the resource that is specified with the field parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory (but still enough to run the task). Valid Values: random, spread, binpack.
          */
         type: pulumi.Input<string>;
         /**
-         * The value of the key-value pair. For environment variables, this is the value of the environment variable.
+         * Value of parameter to start execution of a SageMaker Model Building Pipeline. Maximum length of 1024.
          */
         value: pulumi.Input<string>;
     }
@@ -39906,7 +39880,7 @@ export declare namespace pipes {
          */
         expression?: pulumi.Input<string>;
         /**
-         * The type of resource to assign to a container. The supported resources include GPU, MEMORY, and VCPU.
+         * The type of placement strategy. The random placement strategy randomly places tasks on available candidates. The spread placement strategy spreads placement across available candidates evenly based on the field parameter. The binpack strategy places tasks on available candidates that have the least available amount of the resource that is specified with the field parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory (but still enough to run the task). Valid Values: random, spread, binpack.
          */
         type?: pulumi.Input<string>;
     }
@@ -39916,7 +39890,7 @@ export declare namespace pipes {
          */
         field?: pulumi.Input<string>;
         /**
-         * The type of resource to assign to a container. The supported resources include GPU, MEMORY, and VCPU.
+         * The type of placement strategy. The random placement strategy randomly places tasks on available candidates. The spread placement strategy spreads placement across available candidates evenly based on the field parameter. The binpack strategy places tasks on available candidates that have the least available amount of the resource that is specified with the field parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory (but still enough to run the task). Valid Values: random, spread, binpack.
          */
         type?: pulumi.Input<string>;
     }
@@ -40010,7 +39984,7 @@ export declare namespace pipes {
          */
         name: pulumi.Input<string>;
         /**
-         * The value of the key-value pair. For environment variables, this is the value of the environment variable.
+         * Value of parameter to start execution of a SageMaker Model Building Pipeline. Maximum length of 1024.
          */
         value: pulumi.Input<string>;
     }
@@ -43114,7 +43088,7 @@ export declare namespace s3 {
          */
         format?: pulumi.Input<string>;
         /**
-         * Object prefix for filtering.
+         * Prefix to append to exported analytics data.
          */
         prefix?: pulumi.Input<string>;
     }
@@ -49168,7 +49142,7 @@ export declare namespace signer {
     }
     interface SigningJobSignedObject {
         /**
-         * A configuration block describing the S3 Source object: See S3 Source below for details.
+         * A configuration block describing the S3 Destination object: See S3 Destination below for details.
          */
         s3s?: pulumi.Input<pulumi.Input<inputs.signer.SigningJobSignedObjectS3>[]>;
     }
@@ -50194,7 +50168,7 @@ export declare namespace transfer {
          */
         tagStepDetails?: pulumi.Input<inputs.transfer.WorkflowOnExceptionStepTagStepDetails>;
         /**
-         * One of the following step types are supported. `COPY`, `CUSTOM`, `DECRYPT`, `DELETE`, and `TAG`.
+         * The type of encryption used. Currently, this value must be `"PGP"`.
          */
         type: pulumi.Input<string>;
     }
@@ -50242,7 +50216,7 @@ export declare namespace transfer {
          */
         bucket?: pulumi.Input<string>;
         /**
-         * The name assigned to the file when it was created in S3. You use the object key to retrieve the object.
+         * The name assigned to the tag that you create.
          */
         key?: pulumi.Input<string>;
     }
@@ -50312,7 +50286,7 @@ export declare namespace transfer {
          */
         bucket?: pulumi.Input<string>;
         /**
-         * The name assigned to the file when it was created in S3. You use the object key to retrieve the object.
+         * The name assigned to the tag that you create.
          */
         key?: pulumi.Input<string>;
     }
@@ -50342,7 +50316,7 @@ export declare namespace transfer {
     }
     interface WorkflowOnExceptionStepTagStepDetailsTag {
         /**
-         * The name assigned to the file when it was created in S3. You use the object key to retrieve the object.
+         * The name assigned to the tag that you create.
          */
         key: pulumi.Input<string>;
         /**
@@ -50372,7 +50346,7 @@ export declare namespace transfer {
          */
         tagStepDetails?: pulumi.Input<inputs.transfer.WorkflowStepTagStepDetails>;
         /**
-         * One of the following step types are supported. `COPY`, `CUSTOM`, `DECRYPT`, `DELETE`, and `TAG`.
+         * The type of encryption used. Currently, this value must be `"PGP"`.
          */
         type: pulumi.Input<string>;
     }
@@ -50420,7 +50394,7 @@ export declare namespace transfer {
          */
         bucket?: pulumi.Input<string>;
         /**
-         * The name assigned to the file when it was created in S3. You use the object key to retrieve the object.
+         * The name assigned to the tag that you create.
          */
         key?: pulumi.Input<string>;
     }
@@ -50490,7 +50464,7 @@ export declare namespace transfer {
          */
         bucket?: pulumi.Input<string>;
         /**
-         * The name assigned to the file when it was created in S3. You use the object key to retrieve the object.
+         * The name assigned to the tag that you create.
          */
         key?: pulumi.Input<string>;
     }
@@ -50520,7 +50494,7 @@ export declare namespace transfer {
     }
     interface WorkflowStepTagStepDetailsTag {
         /**
-         * The name assigned to the file when it was created in S3. You use the object key to retrieve the object.
+         * The name assigned to the tag that you create.
          */
         key: pulumi.Input<string>;
         /**
@@ -51028,13 +51002,13 @@ export declare namespace waf {
          */
         ruleId: pulumi.Input<string>;
         /**
-         * e.g., `BLOCK`, `ALLOW`, or `COUNT`
+         * The rule type, either `REGULAR`, `RATE_BASED`, or `GROUP`. Defaults to `REGULAR`.
          */
         type?: pulumi.Input<string>;
     }
     interface RuleGroupActivatedRuleAction {
         /**
-         * e.g., `BLOCK`, `ALLOW`, or `COUNT`
+         * The rule type, either `REGULAR`, `RATE_BASED`, or `GROUP`. Defaults to `REGULAR`.
          */
         type: pulumi.Input<string>;
     }
@@ -51337,13 +51311,13 @@ export declare namespace wafregional {
          */
         ruleId: pulumi.Input<string>;
         /**
-         * e.g., `BLOCK`, `ALLOW`, or `COUNT`
+         * The rule type, either `REGULAR`, `RATE_BASED`, or `GROUP`. Defaults to `REGULAR`.
          */
         type?: pulumi.Input<string>;
     }
     interface RuleGroupActivatedRuleAction {
         /**
-         * e.g., `BLOCK`, `ALLOW`, or `COUNT`
+         * The rule type, either `REGULAR`, `RATE_BASED`, or `GROUP`. Defaults to `REGULAR`.
          */
         type: pulumi.Input<string>;
     }
@@ -51483,7 +51457,7 @@ export declare namespace wafregional {
     }
     interface WebAclRuleOverrideAction {
         /**
-         * Specifies how you want AWS WAF Regional to respond to requests that match the settings in a ruleE.g., `ALLOW`, `BLOCK` or `COUNT`
+         * Specifies how you want AWS WAF Regional to respond to requests that match the settings in a rule. Valid values for `action` are `ALLOW`, `BLOCK` or `COUNT`. Valid values for `overrideAction` are `COUNT` and `NONE`.
          */
         type: pulumi.Input<string>;
     }
@@ -51843,7 +51817,7 @@ export declare namespace wafv2 {
     }
     interface RuleGroupRuleStatementByteMatchStatementFieldToMatchBody {
         /**
-         * Oversize handling tells AWS WAF what to do with a web request when the request component that the rule inspects is over the limits. Valid values include the following: `CONTINUE`, `MATCH`, `NO_MATCH`. See the AWS [documentation](https://docs.aws.amazon.com/waf/latest/developerguide/waf-rule-statement-oversize-handling.html) for more information.
+         * What AWS WAF should do if the cookies of the request are larger than AWS WAF can inspect. AWS WAF does not support inspecting the entire contents of request cookies when they exceed 8 KB (8192 bytes) or 200 total cookies. The underlying host service forwards a maximum of 200 cookies and at most 8 KB of cookie contents to AWS WAF. Valid values: `CONTINUE`, `MATCH`, `NO_MATCH`
          */
         oversizeHandling?: pulumi.Input<string>;
     }
@@ -52091,16 +52065,6 @@ export declare namespace wafv2 {
          * Text transformations eliminate some of the unusual formatting that attackers use in web requests in an effort to bypass detection.
          * At least one required.
          * See Text Transformation below for details.
-         * At least one required.
-         * See Text Transformation below for details.
-         * At least one required.
-         * See Text Transformation below for details.
-         * At least one required.
-         * See Text Transformation below for details.
-         * At least one required.
-         * See Text Transformation below for details.
-         * At least one required.
-         * See Text Transformation below for details.
          */
         textTransformations: pulumi.Input<pulumi.Input<inputs.wafv2.RuleGroupRuleStatementRateBasedStatementCustomKeyCookieTextTransformation>[]>;
     }
@@ -52125,16 +52089,6 @@ export declare namespace wafv2 {
          * Text transformations eliminate some of the unusual formatting that attackers use in web requests in an effort to bypass detection.
          * At least one required.
          * See Text Transformation below for details.
-         * At least one required.
-         * See Text Transformation below for details.
-         * At least one required.
-         * See Text Transformation below for details.
-         * At least one required.
-         * See Text Transformation below for details.
-         * At least one required.
-         * See Text Transformation below for details.
-         * At least one required.
-         * See Text Transformation below for details.
          */
         textTransformations: pulumi.Input<pulumi.Input<inputs.wafv2.RuleGroupRuleStatementRateBasedStatementCustomKeyHeaderTextTransformation>[]>;
     }
@@ -52167,16 +52121,6 @@ export declare namespace wafv2 {
          * Text transformations eliminate some of the unusual formatting that attackers use in web requests in an effort to bypass detection.
          * At least one required.
          * See Text Transformation below for details.
-         * At least one required.
-         * See Text Transformation below for details.
-         * At least one required.
-         * See Text Transformation below for details.
-         * At least one required.
-         * See Text Transformation below for details.
-         * At least one required.
-         * See Text Transformation below for details.
-         * At least one required.
-         * See Text Transformation below for details.
          */
         textTransformations: pulumi.Input<pulumi.Input<inputs.wafv2.RuleGroupRuleStatementRateBasedStatementCustomKeyQueryArgumentTextTransformation>[]>;
     }
@@ -52195,16 +52139,6 @@ export declare namespace wafv2 {
          * Text transformations eliminate some of the unusual formatting that attackers use in web requests in an effort to bypass detection.
          * At least one required.
          * See Text Transformation below for details.
-         * At least one required.
-         * See Text Transformation below for details.
-         * At least one required.
-         * See Text Transformation below for details.
-         * At least one required.
-         * See Text Transformation below for details.
-         * At least one required.
-         * See Text Transformation below for details.
-         * At least one required.
-         * See Text Transformation below for details.
          */
         textTransformations: pulumi.Input<pulumi.Input<inputs.wafv2.RuleGroupRuleStatementRateBasedStatementCustomKeyQueryStringTextTransformation>[]>;
     }
@@ -52223,16 +52157,6 @@ export declare namespace wafv2 {
          * Text transformations eliminate some of the unusual formatting that attackers use in web requests in an effort to bypass detection.
          * At least one required.
          * See Text Transformation below for details.
-         * At least one required.
-         * See Text Transformation below for details.
-         * At least one required.
-         * See Text Transformation below for details.
-         * At least one required.
-         * See Text Transformation below for details.
-         * At least one required.
-         * See Text Transformation below for details.
-         * At least one required.
-         * See Text Transformation below for details.
          */
         textTransformations: pulumi.Input<pulumi.Input<inputs.wafv2.RuleGroupRuleStatementRateBasedStatementCustomKeyUriPathTextTransformation>[]>;
     }
@@ -52378,7 +52302,7 @@ export declare namespace wafv2 {
     }
     interface RuleGroupRuleStatementRateBasedStatementScopeDownStatementByteMatchStatementFieldToMatchBody {
         /**
-         * Oversize handling tells AWS WAF what to do with a web request when the request component that the rule inspects is over the limits. Valid values include the following: `CONTINUE`, `MATCH`, `NO_MATCH`. See the AWS [documentation](https://docs.aws.amazon.com/waf/latest/developerguide/waf-rule-statement-oversize-handling.html) for more information.
+         * What AWS WAF should do if the cookies of the request are larger than AWS WAF can inspect. AWS WAF does not support inspecting the entire contents of request cookies when they exceed 8 KB (8192 bytes) or 200 total cookies. The underlying host service forwards a maximum of 200 cookies and at most 8 KB of cookie contents to AWS WAF. Valid values: `CONTINUE`, `MATCH`, `NO_MATCH`
          */
         oversizeHandling?: pulumi.Input<string>;
     }
@@ -52619,7 +52543,7 @@ export declare namespace wafv2 {
     }
     interface RuleGroupRuleStatementRateBasedStatementScopeDownStatementRegexMatchStatementFieldToMatchBody {
         /**
-         * Oversize handling tells AWS WAF what to do with a web request when the request component that the rule inspects is over the limits. Valid values include the following: `CONTINUE`, `MATCH`, `NO_MATCH`. See the AWS [documentation](https://docs.aws.amazon.com/waf/latest/developerguide/waf-rule-statement-oversize-handling.html) for more information.
+         * What AWS WAF should do if the cookies of the request are larger than AWS WAF can inspect. AWS WAF does not support inspecting the entire contents of request cookies when they exceed 8 KB (8192 bytes) or 200 total cookies. The underlying host service forwards a maximum of 200 cookies and at most 8 KB of cookie contents to AWS WAF. Valid values: `CONTINUE`, `MATCH`, `NO_MATCH`
          */
         oversizeHandling?: pulumi.Input<string>;
     }
@@ -52794,7 +52718,7 @@ export declare namespace wafv2 {
     }
     interface RuleGroupRuleStatementRateBasedStatementScopeDownStatementRegexPatternSetReferenceStatementFieldToMatchBody {
         /**
-         * Oversize handling tells AWS WAF what to do with a web request when the request component that the rule inspects is over the limits. Valid values include the following: `CONTINUE`, `MATCH`, `NO_MATCH`. See the AWS [documentation](https://docs.aws.amazon.com/waf/latest/developerguide/waf-rule-statement-oversize-handling.html) for more information.
+         * What AWS WAF should do if the cookies of the request are larger than AWS WAF can inspect. AWS WAF does not support inspecting the entire contents of request cookies when they exceed 8 KB (8192 bytes) or 200 total cookies. The underlying host service forwards a maximum of 200 cookies and at most 8 KB of cookie contents to AWS WAF. Valid values: `CONTINUE`, `MATCH`, `NO_MATCH`
          */
         oversizeHandling?: pulumi.Input<string>;
     }
@@ -52973,7 +52897,7 @@ export declare namespace wafv2 {
     }
     interface RuleGroupRuleStatementRateBasedStatementScopeDownStatementSizeConstraintStatementFieldToMatchBody {
         /**
-         * Oversize handling tells AWS WAF what to do with a web request when the request component that the rule inspects is over the limits. Valid values include the following: `CONTINUE`, `MATCH`, `NO_MATCH`. See the AWS [documentation](https://docs.aws.amazon.com/waf/latest/developerguide/waf-rule-statement-oversize-handling.html) for more information.
+         * What AWS WAF should do if the cookies of the request are larger than AWS WAF can inspect. AWS WAF does not support inspecting the entire contents of request cookies when they exceed 8 KB (8192 bytes) or 200 total cookies. The underlying host service forwards a maximum of 200 cookies and at most 8 KB of cookie contents to AWS WAF. Valid values: `CONTINUE`, `MATCH`, `NO_MATCH`
          */
         oversizeHandling?: pulumi.Input<string>;
     }
@@ -53144,7 +53068,7 @@ export declare namespace wafv2 {
     }
     interface RuleGroupRuleStatementRateBasedStatementScopeDownStatementSqliMatchStatementFieldToMatchBody {
         /**
-         * Oversize handling tells AWS WAF what to do with a web request when the request component that the rule inspects is over the limits. Valid values include the following: `CONTINUE`, `MATCH`, `NO_MATCH`. See the AWS [documentation](https://docs.aws.amazon.com/waf/latest/developerguide/waf-rule-statement-oversize-handling.html) for more information.
+         * What AWS WAF should do if the cookies of the request are larger than AWS WAF can inspect. AWS WAF does not support inspecting the entire contents of request cookies when they exceed 8 KB (8192 bytes) or 200 total cookies. The underlying host service forwards a maximum of 200 cookies and at most 8 KB of cookie contents to AWS WAF. Valid values: `CONTINUE`, `MATCH`, `NO_MATCH`
          */
         oversizeHandling?: pulumi.Input<string>;
     }
@@ -53315,7 +53239,7 @@ export declare namespace wafv2 {
     }
     interface RuleGroupRuleStatementRateBasedStatementScopeDownStatementXssMatchStatementFieldToMatchBody {
         /**
-         * Oversize handling tells AWS WAF what to do with a web request when the request component that the rule inspects is over the limits. Valid values include the following: `CONTINUE`, `MATCH`, `NO_MATCH`. See the AWS [documentation](https://docs.aws.amazon.com/waf/latest/developerguide/waf-rule-statement-oversize-handling.html) for more information.
+         * What AWS WAF should do if the cookies of the request are larger than AWS WAF can inspect. AWS WAF does not support inspecting the entire contents of request cookies when they exceed 8 KB (8192 bytes) or 200 total cookies. The underlying host service forwards a maximum of 200 cookies and at most 8 KB of cookie contents to AWS WAF. Valid values: `CONTINUE`, `MATCH`, `NO_MATCH`
          */
         oversizeHandling?: pulumi.Input<string>;
     }
@@ -53490,7 +53414,7 @@ export declare namespace wafv2 {
     }
     interface RuleGroupRuleStatementRegexMatchStatementFieldToMatchBody {
         /**
-         * Oversize handling tells AWS WAF what to do with a web request when the request component that the rule inspects is over the limits. Valid values include the following: `CONTINUE`, `MATCH`, `NO_MATCH`. See the AWS [documentation](https://docs.aws.amazon.com/waf/latest/developerguide/waf-rule-statement-oversize-handling.html) for more information.
+         * What AWS WAF should do if the cookies of the request are larger than AWS WAF can inspect. AWS WAF does not support inspecting the entire contents of request cookies when they exceed 8 KB (8192 bytes) or 200 total cookies. The underlying host service forwards a maximum of 200 cookies and at most 8 KB of cookie contents to AWS WAF. Valid values: `CONTINUE`, `MATCH`, `NO_MATCH`
          */
         oversizeHandling?: pulumi.Input<string>;
     }
@@ -53665,7 +53589,7 @@ export declare namespace wafv2 {
     }
     interface RuleGroupRuleStatementRegexPatternSetReferenceStatementFieldToMatchBody {
         /**
-         * Oversize handling tells AWS WAF what to do with a web request when the request component that the rule inspects is over the limits. Valid values include the following: `CONTINUE`, `MATCH`, `NO_MATCH`. See the AWS [documentation](https://docs.aws.amazon.com/waf/latest/developerguide/waf-rule-statement-oversize-handling.html) for more information.
+         * What AWS WAF should do if the cookies of the request are larger than AWS WAF can inspect. AWS WAF does not support inspecting the entire contents of request cookies when they exceed 8 KB (8192 bytes) or 200 total cookies. The underlying host service forwards a maximum of 200 cookies and at most 8 KB of cookie contents to AWS WAF. Valid values: `CONTINUE`, `MATCH`, `NO_MATCH`
          */
         oversizeHandling?: pulumi.Input<string>;
     }
@@ -53844,7 +53768,7 @@ export declare namespace wafv2 {
     }
     interface RuleGroupRuleStatementSizeConstraintStatementFieldToMatchBody {
         /**
-         * Oversize handling tells AWS WAF what to do with a web request when the request component that the rule inspects is over the limits. Valid values include the following: `CONTINUE`, `MATCH`, `NO_MATCH`. See the AWS [documentation](https://docs.aws.amazon.com/waf/latest/developerguide/waf-rule-statement-oversize-handling.html) for more information.
+         * What AWS WAF should do if the cookies of the request are larger than AWS WAF can inspect. AWS WAF does not support inspecting the entire contents of request cookies when they exceed 8 KB (8192 bytes) or 200 total cookies. The underlying host service forwards a maximum of 200 cookies and at most 8 KB of cookie contents to AWS WAF. Valid values: `CONTINUE`, `MATCH`, `NO_MATCH`
          */
         oversizeHandling?: pulumi.Input<string>;
     }
@@ -54015,7 +53939,7 @@ export declare namespace wafv2 {
     }
     interface RuleGroupRuleStatementSqliMatchStatementFieldToMatchBody {
         /**
-         * Oversize handling tells AWS WAF what to do with a web request when the request component that the rule inspects is over the limits. Valid values include the following: `CONTINUE`, `MATCH`, `NO_MATCH`. See the AWS [documentation](https://docs.aws.amazon.com/waf/latest/developerguide/waf-rule-statement-oversize-handling.html) for more information.
+         * What AWS WAF should do if the cookies of the request are larger than AWS WAF can inspect. AWS WAF does not support inspecting the entire contents of request cookies when they exceed 8 KB (8192 bytes) or 200 total cookies. The underlying host service forwards a maximum of 200 cookies and at most 8 KB of cookie contents to AWS WAF. Valid values: `CONTINUE`, `MATCH`, `NO_MATCH`
          */
         oversizeHandling?: pulumi.Input<string>;
     }
@@ -54186,7 +54110,7 @@ export declare namespace wafv2 {
     }
     interface RuleGroupRuleStatementXssMatchStatementFieldToMatchBody {
         /**
-         * Oversize handling tells AWS WAF what to do with a web request when the request component that the rule inspects is over the limits. Valid values include the following: `CONTINUE`, `MATCH`, `NO_MATCH`. See the AWS [documentation](https://docs.aws.amazon.com/waf/latest/developerguide/waf-rule-statement-oversize-handling.html) for more information.
+         * What AWS WAF should do if the cookies of the request are larger than AWS WAF can inspect. AWS WAF does not support inspecting the entire contents of request cookies when they exceed 8 KB (8192 bytes) or 200 total cookies. The underlying host service forwards a maximum of 200 cookies and at most 8 KB of cookie contents to AWS WAF. Valid values: `CONTINUE`, `MATCH`, `NO_MATCH`
          */
         oversizeHandling?: pulumi.Input<string>;
     }
@@ -55109,7 +55033,7 @@ export declare namespace wafv2 {
     }
     interface WebAclRuleStatementManagedRuleGroupStatementManagedRuleGroupConfigAwsManagedRulesAcfpRuleSetRequestInspectionEmailField {
         /**
-         * The name of the password field.
+         * The identifier for the value to match against in the JSON.
          */
         identifier: pulumi.Input<string>;
     }
@@ -55331,11 +55255,11 @@ export declare namespace wafv2 {
     }
     interface WebAclRuleStatementManagedRuleGroupStatementRuleActionOverrideActionToUse {
         /**
-         * Specifies that AWS WAF should allow requests by default. See `allow` below for details.
+         * Instructs AWS WAF to allow the web request. See `allow` below for details.
          */
         allow?: pulumi.Input<inputs.wafv2.WebAclRuleStatementManagedRuleGroupStatementRuleActionOverrideActionToUseAllow>;
         /**
-         * Specifies that AWS WAF should block requests by default. See `block` below for details.
+         * Instructs AWS WAF to block the web request. See `block` below for details.
          */
         block?: pulumi.Input<inputs.wafv2.WebAclRuleStatementManagedRuleGroupStatementRuleActionOverrideActionToUseBlock>;
         /**
@@ -58343,11 +58267,11 @@ export declare namespace wafv2 {
     }
     interface WebAclRuleStatementRuleGroupReferenceStatementRuleActionOverrideActionToUse {
         /**
-         * Specifies that AWS WAF should allow requests by default. See `allow` below for details.
+         * Instructs AWS WAF to allow the web request. See `allow` below for details.
          */
         allow?: pulumi.Input<inputs.wafv2.WebAclRuleStatementRuleGroupReferenceStatementRuleActionOverrideActionToUseAllow>;
         /**
-         * Specifies that AWS WAF should block requests by default. See `block` below for details.
+         * Instructs AWS WAF to block the web request. See `block` below for details.
          */
         block?: pulumi.Input<inputs.wafv2.WebAclRuleStatementRuleGroupReferenceStatementRuleActionOverrideActionToUseBlock>;
         /**