@pulumi/aws-native 1.16.0-alpha.1734035737 → 1.16.0-alpha.1734380882

package/types/input.d.ts

@@ -6351,22 +6351,27 @@ export declare namespace autoscaling {
          */
         min?: pulumi.Input<number>;
     }
+    /**
+     * ``AvailabilityZoneDistribution`` is a property of the [AWS::AutoScaling::AutoScalingGroup](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-autoscaling-autoscalinggroup.html) resource.
+     */
     interface AutoScalingGroupAvailabilityZoneDistributionArgs {
         /**
-         * If launches fail in an Availability Zone, the following strategies are available. The default is `balanced-best-effort` .
-         *
-         * - `balanced-only` - If launches fail in an Availability Zone, Auto Scaling will continue to attempt to launch in the unhealthy zone to preserve a balanced distribution.
-         * - `balanced-best-effort` - If launches fail in an Availability Zone, Auto Scaling will attempt to launch in another healthy Availability Zone instead.
+         * If launches fail in an Availability Zone, the following strategies are available. The default is ``balanced-best-effort``.
+         *   +   ``balanced-only`` - If launches fail in an Availability Zone, Auto Scaling will continue to attempt to launch in the unhealthy zone to preserve a balanced distribution.
+         *   +   ``balanced-best-effort`` - If launches fail in an Availability Zone, Auto Scaling will attempt to launch in another healthy Availability Zone instead.
          */
         capacityDistributionStrategy?: pulumi.Input<enums.autoscaling.AutoScalingGroupAvailabilityZoneDistributionCapacityDistributionStrategy>;
     }
+    /**
+     * Describes an Availability Zone impairment policy.
+     */
     interface AutoScalingGroupAvailabilityZoneImpairmentPolicyArgs {
         /**
-         * Specifies the health check behavior for the impaired Availability Zone in an active zonal shift. If you select `Replace unhealthy` , instances that appear unhealthy will be replaced in all Availability Zones. If you select `Ignore unhealthy` , instances will not be replaced in the Availability Zone with the active zonal shift. For more information, see [Auto Scaling group zonal shift](https://docs.aws.amazon.com/autoscaling/ec2/userguide/ec2-auto-scaling-zonal-shift.html) in the *Amazon EC2 Auto Scaling User Guide* .
+         * Specifies the health check behavior for the impaired Availability Zone in an active zonal shift. If you select ``Replace unhealthy``, instances that appear unhealthy will be replaced in all Availability Zones. If you select ``Ignore unhealthy``, instances will not be replaced in the Availability Zone with the active zonal shift. For more information, see [Auto Scaling group zonal shift](https://docs.aws.amazon.com/autoscaling/ec2/userguide/ec2-auto-scaling-zonal-shift.html) in the *Amazon EC2 Auto Scaling User Guide*.
          */
         impairedZoneHealthCheckBehavior: pulumi.Input<enums.autoscaling.AutoScalingGroupAvailabilityZoneImpairmentPolicyImpairedZoneHealthCheckBehavior>;
         /**
-         * If `true` , enable zonal shift for your Auto Scaling group.
+         * If ``true``, enable zonal shift for your Auto Scaling group.
          */
         zonalShiftEnabled: pulumi.Input<boolean>;
     }
@@ -8163,16 +8168,6 @@ export declare namespace batch {
          */
         terminateJobsOnUpdate?: pulumi.Input<boolean>;
     }
-    interface JobDefinitionAuthorizationConfigArgs {
-        /**
-         * The Amazon EFS access point ID to use. If an access point is specified, the root directory value specified in the `EFSVolumeConfiguration` must either be omitted or set to `/` which enforces the path set on the EFS access point. If an access point is used, transit encryption must be enabled in the `EFSVolumeConfiguration` . For more information, see [Working with Amazon EFS access points](https://docs.aws.amazon.com/efs/latest/ug/efs-access-points.html) in the *Amazon Elastic File System User Guide* .
-         */
-        accessPointId?: pulumi.Input<string>;
-        /**
-         * Whether or not to use the AWS Batch job IAM role defined in a job definition when mounting the Amazon EFS file system. If enabled, transit encryption must be enabled in the `EFSVolumeConfiguration` . If this parameter is omitted, the default value of `DISABLED` is used. For more information, see [Using Amazon EFS access points](https://docs.aws.amazon.com/batch/latest/userguide/efs-volumes.html#efs-volume-accesspoints) in the *AWS Batch User Guide* . EFS IAM authorization requires that `TransitEncryption` be `ENABLED` and that a `JobRoleArn` is specified.
-         */
-        iam?: pulumi.Input<string>;
-    }
     interface JobDefinitionContainerPropertiesArgs {
         /**
          * The command that's passed to the container. This parameter maps to `Cmd` in the [Create a container](https://docs.aws.amazon.com/https://docs.docker.com/engine/api/v1.23/#create-a-container) section of the [Docker Remote API](https://docs.aws.amazon.com/https://docs.docker.com/engine/api/v1.23/) and the `COMMAND` parameter to [docker run](https://docs.aws.amazon.com/https://docs.docker.com/engine/reference/run/) . For more information, see [https://docs.docker.com/engine/reference/builder/#cmd](https://docs.aws.amazon.com/https://docs.docker.com/engine/reference/builder/#cmd) .
@@ -8195,7 +8190,7 @@ export declare namespace batch {
         /**
          * The platform configuration for jobs that are running on Fargate resources. Jobs that are running on Amazon EC2 resources must not specify this parameter.
          */
-        fargatePlatformConfiguration?: pulumi.Input<inputs.batch.JobDefinitionFargatePlatformConfigurationArgs>;
+        fargatePlatformConfiguration?: pulumi.Input<inputs.batch.JobDefinitionContainerPropertiesFargatePlatformConfigurationPropertiesArgs>;
         /**
          * Required. The image used to start a container. This string is passed directly to the Docker daemon. Images in the Docker Hub registry are available by default. Other repositories are specified with `*repository-url* / *image* : *tag*` . It can be 255 characters long. It can contain uppercase and lowercase letters, numbers, hyphens (-), underscores (_), colons (:), periods (.), forward slashes (/), and number signs (#). This parameter maps to `Image` in the [Create a container](https://docs.aws.amazon.com/https://docs.docker.com/engine/api/v1.23/#create-a-container) section of the [Docker Remote API](https://docs.aws.amazon.com/https://docs.docker.com/engine/api/v1.23/) and the `IMAGE` parameter of [docker run](https://docs.aws.amazon.com/https://docs.docker.com/engine/reference/run/) .
          *
@@ -8208,12 +8203,6 @@ export declare namespace batch {
          * - Images in other online repositories are qualified further by a domain name (for example, `quay.io/assemblyline/ubuntu` ).
          */
         image: pulumi.Input<string>;
-        /**
-         * The instance type to use for a multi-node parallel job. All node groups in a multi-node parallel job must use the same instance type.
-         *
-         * > This parameter isn't applicable to single-node container jobs or jobs that run on Fargate resources, and shouldn't be provided.
-         */
-        instanceType?: pulumi.Input<string>;
         /**
          * The Amazon Resource Name (ARN) of the IAM role that the container can assume for AWS permissions. For more information, see [IAM roles for tasks](https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-iam-roles.html) in the *Amazon Elastic Container Service Developer Guide* .
          */
@@ -8241,7 +8230,7 @@ export declare namespace batch {
         /**
          * The mount points for data volumes in your container. This parameter maps to `Volumes` in the [Create a container](https://docs.aws.amazon.com/https://docs.docker.com/engine/api/v1.23/#create-a-container) section of the [Docker Remote API](https://docs.aws.amazon.com/https://docs.docker.com/engine/api/v1.23/) and the `--volume` option to [docker run](https://docs.aws.amazon.com/https://docs.docker.com/engine/reference/run/) .
          */
-        mountPoints?: pulumi.Input<pulumi.Input<inputs.batch.JobDefinitionMountPointsArgs>[]>;
+        mountPoints?: pulumi.Input<pulumi.Input<inputs.batch.JobDefinitionMountPointArgs>[]>;
         /**
          * The network configuration for jobs that are running on Fargate resources. Jobs that are running on Amazon EC2 resources must not specify this parameter.
          */
@@ -8291,7 +8280,13 @@ export declare namespace batch {
         /**
          * A list of data volumes used in a job.
          */
-        volumes?: pulumi.Input<pulumi.Input<inputs.batch.JobDefinitionVolumesArgs>[]>;
+        volumes?: pulumi.Input<pulumi.Input<inputs.batch.JobDefinitionVolumeArgs>[]>;
+    }
+    /**
+     * The platform configuration for jobs that are running on Fargate resources. Jobs that are running on Amazon EC2 resources must not specify this parameter.
+     */
+    interface JobDefinitionContainerPropertiesFargatePlatformConfigurationPropertiesArgs {
+        platformVersion?: pulumi.Input<string>;
     }
     interface JobDefinitionDeviceArgs {
         /**
@@ -8371,13 +8366,23 @@ export declare namespace batch {
         /**
          * A list of volumes that are associated with the job.
          */
-        volumes?: pulumi.Input<pulumi.Input<inputs.batch.JobDefinitionVolumesArgs>[]>;
+        volumes?: pulumi.Input<pulumi.Input<inputs.batch.JobDefinitionVolumeArgs>[]>;
+    }
+    interface JobDefinitionEfsAuthorizationConfigArgs {
+        /**
+         * The Amazon EFS access point ID to use. If an access point is specified, the root directory value specified in the `EFSVolumeConfiguration` must either be omitted or set to `/` which enforces the path set on the EFS access point. If an access point is used, transit encryption must be enabled in the `EFSVolumeConfiguration` . For more information, see [Working with Amazon EFS access points](https://docs.aws.amazon.com/efs/latest/ug/efs-access-points.html) in the *Amazon Elastic File System User Guide* .
+         */
+        accessPointId?: pulumi.Input<string>;
+        /**
+         * Whether or not to use the AWS Batch job IAM role defined in a job definition when mounting the Amazon EFS file system. If enabled, transit encryption must be enabled in the `EFSVolumeConfiguration` . If this parameter is omitted, the default value of `DISABLED` is used. For more information, see [Using Amazon EFS access points](https://docs.aws.amazon.com/batch/latest/userguide/efs-volumes.html#efs-volume-accesspoints) in the *AWS Batch User Guide* . EFS IAM authorization requires that `TransitEncryption` be `ENABLED` and that a `JobRoleArn` is specified.
+         */
+        iam?: pulumi.Input<string>;
     }
     interface JobDefinitionEfsVolumeConfigurationArgs {
         /**
          * The authorization configuration details for the Amazon EFS file system.
          */
-        authorizationConfig?: pulumi.Input<inputs.batch.JobDefinitionAuthorizationConfigArgs>;
+        authorizationConfig?: pulumi.Input<inputs.batch.JobDefinitionEfsAuthorizationConfigArgs>;
         /**
          * The Amazon EFS file system ID to use.
          */
@@ -8461,7 +8466,9 @@ export declare namespace batch {
          * - **cpu** - The number of CPUs that's reserved for the container. Values must be an even multiple of `0.25` . `cpu` can be specified in `limits` , `requests` , or both. If `cpu` is specified in both places, then the value that's specified in `limits` must be at least as large as the value that's specified in `requests` .
          * - **nvidia.com/gpu** - The number of GPUs that's reserved for the container. Values must be a whole integer. `memory` can be specified in `limits` , `requests` , or both. If `memory` is specified in both places, then the value that's specified in `limits` must be equal to the value that's specified in `requests` .
          */
-        limits?: any;
+        limits?: pulumi.Input<{
+            [key: string]: pulumi.Input<string>;
+        }>;
         /**
          * The type and quantity of the resources to request for the container. The values vary based on the `name` that's specified. Resources can be requested by using either the `limits` or the `requests` objects.
          *
@@ -8471,7 +8478,9 @@ export declare namespace batch {
          * - **cpu** - The number of CPUs that are reserved for the container. Values must be an even multiple of `0.25` . `cpu` can be specified in `limits` , `requests` , or both. If `cpu` is specified in both, then the value that's specified in `limits` must be at least as large as the value that's specified in `requests` .
          * - **nvidia.com/gpu** - The number of GPUs that are reserved for the container. Values must be a whole integer. `nvidia.com/gpu` can be specified in `limits` , `requests` , or both. If `nvidia.com/gpu` is specified in both, then the value that's specified in `limits` must be equal to the value that's specified in `requests` .
          */
-        requests?: any;
+        requests?: pulumi.Input<{
+            [key: string]: pulumi.Input<string>;
+        }>;
     }
     interface JobDefinitionEksContainerSecurityContextArgs {
         /**
@@ -8532,11 +8541,65 @@ export declare namespace batch {
          */
         path?: pulumi.Input<string>;
     }
+    interface JobDefinitionEksMetadataArgs {
+        /**
+         * Key-value pairs used to identify, sort, and organize cube resources. Can contain up to 63 uppercase letters, lowercase letters, numbers, hyphens (-), and underscores (_). Labels can be added or modified at any time. Each resource can have multiple labels, but each key must be unique for a given object.
+         */
+        labels?: pulumi.Input<{
+            [key: string]: pulumi.Input<string>;
+        }>;
+    }
+    interface JobDefinitionEksPodPropertiesArgs {
+        /**
+         * The properties of the container that's used on the Amazon EKS pod.
+         *
+         * > This object is limited to 10 elements.
+         */
+        containers?: pulumi.Input<pulumi.Input<inputs.batch.JobDefinitionEksContainerArgs>[]>;
+        /**
+         * The DNS policy for the pod. The default value is `ClusterFirst` . If the `hostNetwork` parameter is not specified, the default is `ClusterFirstWithHostNet` . `ClusterFirst` indicates that any DNS query that does not match the configured cluster domain suffix is forwarded to the upstream nameserver inherited from the node. For more information, see [Pod's DNS policy](https://docs.aws.amazon.com/https://kubernetes.io/docs/concepts/services-networking/dns-pod-service/#pod-s-dns-policy) in the *Kubernetes documentation* .
+         *
+         * Valid values: `Default` | `ClusterFirst` | `ClusterFirstWithHostNet`
+         */
+        dnsPolicy?: pulumi.Input<string>;
+        /**
+         * Indicates if the pod uses the hosts' network IP address. The default value is `true` . Setting this to `false` enables the Kubernetes pod networking model. Most AWS Batch workloads are egress-only and don't require the overhead of IP allocation for each pod for incoming connections. For more information, see [Host namespaces](https://docs.aws.amazon.com/https://kubernetes.io/docs/concepts/security/pod-security-policy/#host-namespaces) and [Pod networking](https://docs.aws.amazon.com/https://kubernetes.io/docs/concepts/workloads/pods/#pod-networking) in the *Kubernetes documentation* .
+         */
+        hostNetwork?: pulumi.Input<boolean>;
+        /**
+         * References a Kubernetes secret resource. It holds a list of secrets. These secrets help to gain access to pull an images from a private registry.
+         *
+         * `ImagePullSecret$name` is required when this object is used.
+         */
+        imagePullSecrets?: pulumi.Input<pulumi.Input<inputs.batch.JobDefinitionImagePullSecretArgs>[]>;
+        /**
+         * These containers run before application containers, always runs to completion, and must complete successfully before the next container starts. These containers are registered with the Amazon EKS Connector agent and persists the registration information in the Kubernetes backend data store. For more information, see [Init Containers](https://docs.aws.amazon.com/https://kubernetes.io/docs/concepts/workloads/pods/init-containers/) in the *Kubernetes documentation* .
+         *
+         * > This object is limited to 10 elements.
+         */
+        initContainers?: pulumi.Input<pulumi.Input<inputs.batch.JobDefinitionEksContainerArgs>[]>;
+        /**
+         * Metadata about the Kubernetes pod. For more information, see [Understanding Kubernetes Objects](https://docs.aws.amazon.com/https://kubernetes.io/docs/concepts/overview/working-with-objects/kubernetes-objects/) in the *Kubernetes documentation* .
+         */
+        metadata?: pulumi.Input<inputs.batch.JobDefinitionEksMetadataArgs>;
+        /**
+         * The name of the service account that's used to run the pod. For more information, see [Kubernetes service accounts](https://docs.aws.amazon.com/eks/latest/userguide/service-accounts.html) and [Configure a Kubernetes service account to assume an IAM role](https://docs.aws.amazon.com/eks/latest/userguide/associate-service-account-role.html) in the *Amazon EKS User Guide* and [Configure service accounts for pods](https://docs.aws.amazon.com/https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/) in the *Kubernetes documentation* .
+         */
+        serviceAccountName?: pulumi.Input<string>;
+        /**
+         * Indicates if the processes in a container are shared, or visible, to other containers in the same pod. For more information, see [Share Process Namespace between Containers in a Pod](https://docs.aws.amazon.com/https://kubernetes.io/docs/tasks/configure-pod-container/share-process-namespace/) .
+         */
+        shareProcessNamespace?: pulumi.Input<boolean>;
+        /**
+         * Specifies the volumes for a job definition that uses Amazon EKS resources.
+         */
+        volumes?: pulumi.Input<pulumi.Input<inputs.batch.JobDefinitionEksVolumeArgs>[]>;
+    }
     interface JobDefinitionEksPropertiesArgs {
         /**
          * The properties for the Kubernetes pod resources of a job.
          */
-        podProperties?: pulumi.Input<inputs.batch.JobDefinitionPodPropertiesArgs>;
+        podProperties?: pulumi.Input<inputs.batch.JobDefinitionEksPodPropertiesArgs>;
     }
     interface JobDefinitionEksSecretArgs {
         /**
@@ -8602,17 +8665,29 @@ export declare namespace batch {
          */
         onStatusReason?: pulumi.Input<string>;
     }
-    interface JobDefinitionFargatePlatformConfigurationArgs {
+    interface JobDefinitionHostArgs {
         /**
-         * The AWS Fargate platform version where the jobs are running. A platform version is specified only for jobs that are running on Fargate resources. If one isn't specified, the `LATEST` platform version is used by default. This uses a recent, approved version of the AWS Fargate platform for compute resources. For more information, see [AWS Fargate platform versions](https://docs.aws.amazon.com/AmazonECS/latest/developerguide/platform_versions.html) in the *Amazon Elastic Container Service Developer Guide* .
+         * The path on the host container instance that's presented to the container. If this parameter is empty, then the Docker daemon has assigned a host path for you. If this parameter contains a file location, then the data volume persists at the specified location on the host container instance until you delete it manually. If the source path location doesn't exist on the host container instance, the Docker daemon creates it. If the location does exist, the contents of the source path folder are exported.
+         *
+         * > This parameter isn't applicable to jobs that run on Fargate resources. Don't provide this for these jobs.
          */
-        platformVersion?: pulumi.Input<string>;
+        sourcePath?: pulumi.Input<string>;
     }
     interface JobDefinitionImagePullSecretArgs {
         /**
          * Provides a unique identifier for the `ImagePullSecret` . This object is required when `EksPodProperties$imagePullSecrets` is used.
          */
-        name: pulumi.Input<string>;
+        name?: pulumi.Input<string>;
+    }
+    interface JobDefinitionJobTimeoutArgs {
+        /**
+         * The job timeout time (in seconds) that's measured from the job attempt's `startedAt` timestamp. After this time passes, AWS Batch terminates your jobs if they aren't finished. The minimum value for the timeout is 60 seconds.
+         *
+         * For array jobs, the timeout applies to the child jobs, not to the parent array job.
+         *
+         * For multi-node parallel (MNP) jobs, the timeout applies to the whole job, not to the individual nodes.
+         */
+        attemptDurationSeconds?: pulumi.Input<number>;
     }
     interface JobDefinitionLinuxParametersArgs {
         /**
@@ -8684,19 +8759,15 @@ export declare namespace batch {
         /**
          * The configuration options to send to the log driver. This parameter requires version 1.19 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: `sudo docker version | grep "Server API version"`
          */
-        options?: any;
+        options?: pulumi.Input<{
+            [key: string]: pulumi.Input<string>;
+        }>;
         /**
          * The secrets to pass to the log configuration. For more information, see [Specifying sensitive data](https://docs.aws.amazon.com/batch/latest/userguide/specifying-sensitive-data.html) in the *AWS Batch User Guide* .
          */
         secretOptions?: pulumi.Input<pulumi.Input<inputs.batch.JobDefinitionSecretArgs>[]>;
     }
-    interface JobDefinitionMetadataArgs {
-        /**
-         * Key-value pairs used to identify, sort, and organize cube resources. Can contain up to 63 uppercase letters, lowercase letters, numbers, hyphens (-), and underscores (_). Labels can be added or modified at any time. Each resource can have multiple labels, but each key must be unique for a given object.
-         */
-        labels?: any;
-    }
-    interface JobDefinitionMountPointsArgs {
+    interface JobDefinitionMountPointArgs {
         /**
          * The path on the container where the host volume is mounted.
          */
@@ -8710,6 +8781,40 @@ export declare namespace batch {
          */
         sourceVolume?: pulumi.Input<string>;
     }
+    interface JobDefinitionMultiNodeContainerPropertiesArgs {
+        command?: pulumi.Input<pulumi.Input<string>[]>;
+        environment?: pulumi.Input<pulumi.Input<inputs.batch.JobDefinitionEnvironmentArgs>[]>;
+        ephemeralStorage?: pulumi.Input<inputs.batch.JobDefinitionEphemeralStorageArgs>;
+        executionRoleArn?: pulumi.Input<string>;
+        image: pulumi.Input<string>;
+        instanceType?: pulumi.Input<string>;
+        jobRoleArn?: pulumi.Input<string>;
+        linuxParameters?: pulumi.Input<inputs.batch.JobDefinitionLinuxParametersArgs>;
+        logConfiguration?: pulumi.Input<inputs.batch.JobDefinitionLogConfigurationArgs>;
+        memory?: pulumi.Input<number>;
+        mountPoints?: pulumi.Input<pulumi.Input<inputs.batch.JobDefinitionMountPointArgs>[]>;
+        privileged?: pulumi.Input<boolean>;
+        readonlyRootFilesystem?: pulumi.Input<boolean>;
+        repositoryCredentials?: pulumi.Input<inputs.batch.JobDefinitionRepositoryCredentialsArgs>;
+        resourceRequirements?: pulumi.Input<pulumi.Input<inputs.batch.JobDefinitionResourceRequirementArgs>[]>;
+        runtimePlatform?: pulumi.Input<inputs.batch.JobDefinitionRuntimePlatformArgs>;
+        secrets?: pulumi.Input<pulumi.Input<inputs.batch.JobDefinitionSecretArgs>[]>;
+        ulimits?: pulumi.Input<pulumi.Input<inputs.batch.JobDefinitionUlimitArgs>[]>;
+        user?: pulumi.Input<string>;
+        vcpus?: pulumi.Input<number>;
+        volumes?: pulumi.Input<pulumi.Input<inputs.batch.JobDefinitionVolumeArgs>[]>;
+    }
+    interface JobDefinitionMultiNodeEcsPropertiesArgs {
+        taskProperties: pulumi.Input<pulumi.Input<inputs.batch.JobDefinitionMultiNodeEcsTaskPropertiesArgs>[]>;
+    }
+    interface JobDefinitionMultiNodeEcsTaskPropertiesArgs {
+        containers?: pulumi.Input<pulumi.Input<inputs.batch.JobDefinitionTaskContainerPropertiesArgs>[]>;
+        executionRoleArn?: pulumi.Input<string>;
+        ipcMode?: pulumi.Input<string>;
+        pidMode?: pulumi.Input<string>;
+        taskRoleArn?: pulumi.Input<string>;
+        volumes?: pulumi.Input<pulumi.Input<inputs.batch.JobDefinitionVolumeArgs>[]>;
+    }
     interface JobDefinitionNetworkConfigurationArgs {
         /**
          * Indicates whether the job has a public IP address. For a job that's running on Fargate resources in a private subnet to send outbound traffic to the internet (for example, to pull container images), the private subnet requires a NAT gateway be attached to route requests to the internet. For more information, see [Amazon ECS task networking](https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-networking.html) in the *Amazon Elastic Container Service Developer Guide* . The default value is " `DISABLED` ".
@@ -8734,11 +8839,11 @@ export declare namespace batch {
         /**
          * The container details for the node range.
          */
-        container?: pulumi.Input<inputs.batch.JobDefinitionContainerPropertiesArgs>;
+        container?: pulumi.Input<inputs.batch.JobDefinitionMultiNodeContainerPropertiesArgs>;
         /**
          * This is an object that represents the properties of the node range for a multi-node parallel job.
          */
-        ecsProperties?: pulumi.Input<inputs.batch.JobDefinitionEcsPropertiesArgs>;
+        ecsProperties?: pulumi.Input<inputs.batch.JobDefinitionMultiNodeEcsPropertiesArgs>;
         /**
          * This is an object that represents the properties of the node range for a multi-node parallel job.
          */
@@ -8756,47 +8861,6 @@ export declare namespace batch {
          */
         targetNodes: pulumi.Input<string>;
     }
-    interface JobDefinitionPodPropertiesArgs {
-        /**
-         * The properties of the container that's used on the Amazon EKS pod.
-         *
-         * > This object is limited to 10 elements.
-         */
-        containers?: pulumi.Input<pulumi.Input<inputs.batch.JobDefinitionEksContainerArgs>[]>;
-        /**
-         * The DNS policy for the pod. The default value is `ClusterFirst` . If the `hostNetwork` parameter is not specified, the default is `ClusterFirstWithHostNet` . `ClusterFirst` indicates that any DNS query that does not match the configured cluster domain suffix is forwarded to the upstream nameserver inherited from the node. For more information, see [Pod's DNS policy](https://docs.aws.amazon.com/https://kubernetes.io/docs/concepts/services-networking/dns-pod-service/#pod-s-dns-policy) in the *Kubernetes documentation* .
-         *
-         * Valid values: `Default` | `ClusterFirst` | `ClusterFirstWithHostNet`
-         */
-        dnsPolicy?: pulumi.Input<string>;
-        /**
-         * Indicates if the pod uses the hosts' network IP address. The default value is `true` . Setting this to `false` enables the Kubernetes pod networking model. Most AWS Batch workloads are egress-only and don't require the overhead of IP allocation for each pod for incoming connections. For more information, see [Host namespaces](https://docs.aws.amazon.com/https://kubernetes.io/docs/concepts/security/pod-security-policy/#host-namespaces) and [Pod networking](https://docs.aws.amazon.com/https://kubernetes.io/docs/concepts/workloads/pods/#pod-networking) in the *Kubernetes documentation* .
-         */
-        hostNetwork?: pulumi.Input<boolean>;
-        imagePullSecrets?: pulumi.Input<pulumi.Input<inputs.batch.JobDefinitionImagePullSecretArgs>[]>;
-        /**
-         * These containers run before application containers, always runs to completion, and must complete successfully before the next container starts. These containers are registered with the Amazon EKS Connector agent and persists the registration information in the Kubernetes backend data store. For more information, see [Init Containers](https://docs.aws.amazon.com/https://kubernetes.io/docs/concepts/workloads/pods/init-containers/) in the *Kubernetes documentation* .
-         *
-         * > This object is limited to 10 elements.
-         */
-        initContainers?: pulumi.Input<pulumi.Input<inputs.batch.JobDefinitionEksContainerArgs>[]>;
-        /**
-         * Metadata about the Kubernetes pod. For more information, see [Understanding Kubernetes Objects](https://docs.aws.amazon.com/https://kubernetes.io/docs/concepts/overview/working-with-objects/kubernetes-objects/) in the *Kubernetes documentation* .
-         */
-        metadata?: pulumi.Input<inputs.batch.JobDefinitionMetadataArgs>;
-        /**
-         * The name of the service account that's used to run the pod. For more information, see [Kubernetes service accounts](https://docs.aws.amazon.com/eks/latest/userguide/service-accounts.html) and [Configure a Kubernetes service account to assume an IAM role](https://docs.aws.amazon.com/eks/latest/userguide/associate-service-account-role.html) in the *Amazon EKS User Guide* and [Configure service accounts for pods](https://docs.aws.amazon.com/https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/) in the *Kubernetes documentation* .
-         */
-        serviceAccountName?: pulumi.Input<string>;
-        /**
-         * Indicates if the processes in a container are shared, or visible, to other containers in the same pod. For more information, see [Share Process Namespace between Containers in a Pod](https://docs.aws.amazon.com/https://kubernetes.io/docs/tasks/configure-pod-container/share-process-namespace/) .
-         */
-        shareProcessNamespace?: pulumi.Input<boolean>;
-        /**
-         * Specifies the volumes for a job definition that uses Amazon EKS resources.
-         */
-        volumes?: pulumi.Input<pulumi.Input<inputs.batch.JobDefinitionEksVolumeArgs>[]>;
-    }
     interface JobDefinitionRepositoryCredentialsArgs {
         /**
          * The Amazon Resource Name (ARN) of the secret containing the private repository credentials.
@@ -8950,7 +9014,7 @@ export declare namespace batch {
          *
          * Windows containers can mount whole directories on the same drive as `$env:ProgramData` . Windows containers can't mount directories on a different drive, and mount point can't be across drives.
          */
-        mountPoints?: pulumi.Input<pulumi.Input<inputs.batch.JobDefinitionMountPointsArgs>[]>;
+        mountPoints?: pulumi.Input<pulumi.Input<inputs.batch.JobDefinitionMountPointArgs>[]>;
         /**
          * The name of a container. The name can be used as a unique identifier to target your `dependsOn` and `Overrides` objects.
          */
@@ -9007,16 +9071,6 @@ export declare namespace batch {
          */
         user?: pulumi.Input<string>;
     }
-    interface JobDefinitionTimeoutArgs {
-        /**
-         * The job timeout time (in seconds) that's measured from the job attempt's `startedAt` timestamp. After this time passes, AWS Batch terminates your jobs if they aren't finished. The minimum value for the timeout is 60 seconds.
-         *
-         * For array jobs, the timeout applies to the child jobs, not to the parent array job.
-         *
-         * For multi-node parallel (MNP) jobs, the timeout applies to the whole job, not to the individual nodes.
-         */
-        attemptDurationSeconds?: pulumi.Input<number>;
-    }
     interface JobDefinitionTmpfsArgs {
         /**
          * The absolute file path in the container where the `tmpfs` volume is mounted.
@@ -9047,9 +9101,9 @@ export declare namespace batch {
          */
         softLimit: pulumi.Input<number>;
     }
-    interface JobDefinitionVolumesArgs {
+    interface JobDefinitionVolumeArgs {
         /**
-         * This is used when you're using an Amazon Elastic File System file system for job storage. For more information, see [Amazon EFS Volumes](https://docs.aws.amazon.com/batch/latest/userguide/efs-volumes.html) in the *AWS Batch User Guide* .
+         * This parameter is specified when you're using an Amazon Elastic File System file system for job storage. Jobs that are running on Fargate resources must specify a `platformVersion` of at least `1.4.0` .
          */
         efsVolumeConfiguration?: pulumi.Input<inputs.batch.JobDefinitionEfsVolumeConfigurationArgs>;
         /**
@@ -9057,20 +9111,12 @@ export declare namespace batch {
          *
          * > This parameter isn't applicable to jobs that are running on Fargate resources and shouldn't be provided.
          */
-        host?: pulumi.Input<inputs.batch.JobDefinitionVolumesHostArgs>;
+        host?: pulumi.Input<inputs.batch.JobDefinitionHostArgs>;
         /**
          * The name of the volume. It can be up to 255 characters long. It can contain uppercase and lowercase letters, numbers, hyphens (-), and underscores (_). This name is referenced in the `sourceVolume` parameter of container definition `mountPoints` .
          */
         name?: pulumi.Input<string>;
     }
-    interface JobDefinitionVolumesHostArgs {
-        /**
-         * The path on the host container instance that's presented to the container. If this parameter is empty, then the Docker daemon has assigned a host path for you. If this parameter contains a file location, then the data volume persists at the specified location on the host container instance until you delete it manually. If the source path location doesn't exist on the host container instance, the Docker daemon creates it. If the location does exist, the contents of the source path folder are exported.
-         *
-         * > This parameter isn't applicable to jobs that run on Fargate resources. Don't provide this for these jobs.
-         */
-        sourcePath?: pulumi.Input<string>;
-    }
     interface JobQueueComputeEnvironmentOrderArgs {
         /**
          * The Amazon Resource Name (ARN) of the compute environment.
@@ -11206,6 +11252,10 @@ export declare namespace cassandra {
          */
         targetValue: pulumi.Input<number>;
     }
+    interface TypeFieldArgs {
+        fieldName: pulumi.Input<string>;
+        fieldType: pulumi.Input<string>;
+    }
 }
 export declare namespace ce {
     /**
@@ -11470,6 +11520,12 @@ export declare namespace cleanrooms {
     interface ConfiguredTableAssociationAnalysisRulePolicyV12PropertiesArgs {
         custom: pulumi.Input<inputs.cleanrooms.ConfiguredTableAssociationAnalysisRuleCustomArgs>;
     }
+    interface ConfiguredTableAthenaTableReferenceArgs {
+        databaseName: pulumi.Input<string>;
+        outputLocation?: pulumi.Input<string>;
+        tableName: pulumi.Input<string>;
+        workGroup: pulumi.Input<string>;
+    }
     interface ConfiguredTableDifferentialPrivacyArgs {
         columns: pulumi.Input<pulumi.Input<inputs.cleanrooms.ConfiguredTableDifferentialPrivacyColumnArgs>[]>;
     }
@@ -11477,21 +11533,33 @@ export declare namespace cleanrooms {
         name: pulumi.Input<string>;
     }
     interface ConfiguredTableGlueTableReferenceArgs {
-        /**
-         * The name of the database the AWS Glue table belongs to.
-         */
         databaseName: pulumi.Input<string>;
-        /**
-         * The name of the AWS Glue table.
-         */
         tableName: pulumi.Input<string>;
     }
-    interface ConfiguredTableTableReferenceArgs {
-        /**
-         * If present, a reference to the AWS Glue table referred to by this table reference.
-         */
+    interface ConfiguredTableSnowflakeTableReferenceArgs {
+        accountIdentifier: pulumi.Input<string>;
+        databaseName: pulumi.Input<string>;
+        schemaName: pulumi.Input<string>;
+        secretArn: pulumi.Input<string>;
+        tableName: pulumi.Input<string>;
+        tableSchema: pulumi.Input<inputs.cleanrooms.ConfiguredTableSnowflakeTableSchemaPropertiesArgs>;
+    }
+    interface ConfiguredTableSnowflakeTableSchemaPropertiesArgs {
+        v1: pulumi.Input<pulumi.Input<inputs.cleanrooms.ConfiguredTableSnowflakeTableSchemaV1Args>[]>;
+    }
+    interface ConfiguredTableSnowflakeTableSchemaV1Args {
+        columnName: pulumi.Input<string>;
+        columnType: pulumi.Input<string>;
+    }
+    interface ConfiguredTableTableReference0PropertiesArgs {
         glue: pulumi.Input<inputs.cleanrooms.ConfiguredTableGlueTableReferenceArgs>;
     }
+    interface ConfiguredTableTableReference1PropertiesArgs {
+        snowflake: pulumi.Input<inputs.cleanrooms.ConfiguredTableSnowflakeTableReferenceArgs>;
+    }
+    interface ConfiguredTableTableReference2PropertiesArgs {
+        athena: pulumi.Input<inputs.cleanrooms.ConfiguredTableAthenaTableReferenceArgs>;
+    }
     interface IdMappingTableInputReferenceConfigArgs {
         /**
          * The Amazon Resource Name (ARN) of the referenced resource in AWS Entity Resolution . Valid values are ID mapping workflow ARNs.
@@ -11797,15 +11865,15 @@ export declare namespace cloudformation {
          */
         concurrencyMode?: pulumi.Input<enums.cloudformation.StackSetConcurrencyMode>;
         /**
-         * The number of accounts, per Region, for which this operation can fail before AWS CloudFormation stops the operation in that Region. If the operation is stopped in a Region, AWS CloudFormation doesn't attempt the operation in any subsequent Regions.
+         * The number of accounts, per Region, for which this operation can fail before CloudFormation stops the operation in that Region. If the operation is stopped in a Region, CloudFormation doesn't attempt the operation in any subsequent Regions.
          *
          * Conditional: You must specify either `FailureToleranceCount` or `FailureTolerancePercentage` (but not both).
          */
         failureToleranceCount?: pulumi.Input<number>;
         /**
-         * The percentage of accounts, per Region, for which this stack operation can fail before AWS CloudFormation stops the operation in that Region. If the operation is stopped in a Region, AWS CloudFormation doesn't attempt the operation in any subsequent Regions.
+         * The percentage of accounts, per Region, for which this stack operation can fail before CloudFormation stops the operation in that Region. If the operation is stopped in a Region, CloudFormation doesn't attempt the operation in any subsequent Regions.
          *
-         * When calculating the number of accounts based on the specified percentage, AWS CloudFormation rounds *down* to the next whole number.
+         * When calculating the number of accounts based on the specified percentage, CloudFormation rounds *down* to the next whole number.
          *
          * Conditional: You must specify either `FailureToleranceCount` or `FailureTolerancePercentage` , but not both.
          */
@@ -11821,7 +11889,7 @@ export declare namespace cloudformation {
         /**
          * The maximum percentage of accounts in which to perform this operation at one time.
          *
-         * When calculating the number of accounts based on the specified percentage, AWS CloudFormation rounds down to the next whole number. This is true except in cases where rounding down would result is zero. In this case, CloudFormation sets the number as one instead.
+         * When calculating the number of accounts based on the specified percentage, CloudFormation rounds down to the next whole number. This is true except in cases where rounding down would result is zero. In this case, CloudFormation sets the number as one instead.
          *
          * Note that this setting lets you specify the *maximum* for operations. For large deployments, under certain circumstances the actual number of accounts acted upon concurrently may be lower due to service throttling.
          *
@@ -12196,6 +12264,10 @@ export declare namespace cloudfront {
          * A list of CloudFront functions that are associated with this cache behavior. CloudFront functions must be published to the ``LIVE`` stage to associate them with a cache behavior.
          */
         functionAssociations?: pulumi.Input<pulumi.Input<inputs.cloudfront.DistributionFunctionAssociationArgs>[]>;
+        /**
+         * The gRPC configuration for your cache behavior.
+         */
+        grpcConfig?: pulumi.Input<inputs.cloudfront.DistributionGrpcConfigArgs>;
         /**
          * A complex type that contains zero or more Lambda@Edge function associations for a cache behavior.
          */
@@ -12523,6 +12595,10 @@ export declare namespace cloudfront {
          * A list of CloudFront functions that are associated with this cache behavior. Your functions must be published to the ``LIVE`` stage to associate them with a cache behavior.
          */
         functionAssociations?: pulumi.Input<pulumi.Input<inputs.cloudfront.DistributionFunctionAssociationArgs>[]>;
+        /**
+         * The gRPC configuration for your cache behavior.
+         */
+        grpcConfig?: pulumi.Input<inputs.cloudfront.DistributionGrpcConfigArgs>;
         /**
          * A complex type that contains zero or more Lambda@Edge function associations for a cache behavior.
          */
@@ -12652,6 +12728,12 @@ export declare namespace cloudfront {
          */
         restrictionType: pulumi.Input<string>;
     }
+    interface DistributionGrpcConfigArgs {
+        /**
+         * Enables your CloudFront distribution to receive gRPC requests and to proxy them directly to your origins.
+         */
+        enabled: pulumi.Input<boolean>;
+    }
     /**
      * A complex type that contains a Lambda@Edge function association.
      */
@@ -12723,7 +12805,7 @@ export declare namespace cloudfront {
         /**
          * The Amazon S3 bucket to store the access logs in, for example, ``myawslogbucket.s3.amazonaws.com``.
          */
-        bucket: pulumi.Input<string>;
+        bucket?: pulumi.Input<string>;
         /**
          * Specifies whether you want CloudFront to include cookies in access logs, specify ``true`` for ``IncludeCookies``. If you choose to include cookies in logs, CloudFront logs all cookies regardless of how you configure the cache behaviors for this distribution. If you don't want to include cookies when you create a distribution or if you want to disable include cookies for an existing distribution, specify ``false`` for ``IncludeCookies``.
          */
@@ -12827,6 +12909,10 @@ export declare namespace cloudfront {
          * A complex type that contains information about the origins in an origin group.
          */
         members: pulumi.Input<inputs.cloudfront.DistributionOriginGroupMembersArgs>;
+        /**
+         * The selection criteria for the origin group. For more information, see [Create an origin group](https://docs.aws.amazon.com/AmazonCloudFront/latest/DeveloperGuide/high_availability_origin_failover.html#concept_origin_groups.creating) in the *Amazon CloudFront Developer Guide* .
+         */
+        selectionCriteria?: pulumi.Input<enums.cloudfront.DistributionOriginGroupSelectionCriteria>;
     }
     /**
      * A complex data type that includes information about the failover criteria for an origin group, including the status codes for which CloudFront will failover from the primary origin to the second origin.
@@ -15975,8 +16061,17 @@ export declare namespace connect {
      * Overrides attached to the hours of operation.
      */
     interface HoursOfOperationOverrideArgs {
+        /**
+         * The date from which the hours of operation override would be effective.
+         */
         effectiveFrom: pulumi.Input<string>;
+        /**
+         * The date till which the hours of operation override would be effective.
+         */
         effectiveTill: pulumi.Input<string>;
+        /**
+         * The identifier for the hours of operation override.
+         */
         hoursOfOperationOverrideId?: pulumi.Input<string>;
         overrideConfig: pulumi.Input<pulumi.Input<inputs.connect.HoursOfOperationOverrideConfigArgs>[]>;
         overrideDescription?: pulumi.Input<string>;
@@ -16109,6 +16204,15 @@ export declare namespace connect {
          */
         outboundFlowArn?: pulumi.Input<string>;
     }
+    /**
+     * The outbound email address ID.
+     */
+    interface QueueOutboundEmailConfigArgs {
+        /**
+         * The identifier of the email address.
+         */
+        outboundEmailAddressId?: pulumi.Input<string>;
+    }
     /**
      * Configuration settings for the quick connect.
      */
@@ -16228,17 +16332,17 @@ export declare namespace connect {
         queueArn: pulumi.Input<string>;
     }
     /**
-     * The list of actions that will be executed when a rule is triggered.
+     * A list of actions to be run when the rule is triggered.
      */
     interface RuleActionsArgs {
         /**
-         * Information about the contact category action. The syntax can be empty, for example, `{}` .
+         * Information about the contact category action. The syntax can be empty, for example, ``{}``.
          */
         assignContactCategoryActions?: pulumi.Input<pulumi.Input<inputs.connect.RuleAssignContactCategoryActionArgs>[]>;
         createCaseActions?: pulumi.Input<pulumi.Input<inputs.connect.RuleCreateCaseActionArgs>[]>;
         endAssociatedTasksActions?: pulumi.Input<pulumi.Input<inputs.connect.RuleEndAssociatedTasksActionArgs>[]>;
         /**
-         * Information about the EventBridge action.
+         * Information about the EV action.
          */
         eventBridgeActions?: pulumi.Input<pulumi.Input<inputs.connect.RuleEventBridgeActionArgs>[]>;
         /**
@@ -16247,7 +16351,7 @@ export declare namespace connect {
         sendNotificationActions?: pulumi.Input<pulumi.Input<inputs.connect.RuleSendNotificationActionArgs>[]>;
         submitAutoEvaluationActions?: pulumi.Input<pulumi.Input<inputs.connect.RuleSubmitAutoEvaluationActionArgs>[]>;
         /**
-         * Information about the task action. This field is required if `TriggerEventSource` is one of the following values: `OnZendeskTicketCreate` | `OnZendeskTicketStatusUpdate` | `OnSalesforceCaseCreate`
+         * Information about the task action. This field is required if ``TriggerEventSource`` is one of the following values: ``OnZendeskTicketCreate`` | ``OnZendeskTicketStatusUpdate`` | ``OnSalesforceCaseCreate``
          */
         taskActions?: pulumi.Input<pulumi.Input<inputs.connect.RuleTaskActionArgs>[]>;
         updateCaseActions?: pulumi.Input<pulumi.Input<inputs.connect.RuleUpdateCaseActionArgs>[]>;
@@ -16257,14 +16361,8 @@ export declare namespace connect {
      */
     interface RuleAssignContactCategoryActionArgs {
     }
-    /**
-     * The definition for create case action.
-     */
     interface RuleCreateCaseActionArgs {
         fields: pulumi.Input<pulumi.Input<inputs.connect.RuleFieldArgs>[]>;
-        /**
-         * The Id of template.
-         */
         templateId: pulumi.Input<string>;
     }
     /**
@@ -16273,26 +16371,20 @@ export declare namespace connect {
     interface RuleEndAssociatedTasksActionArgs {
     }
     /**
-     * The definition for event bridge action.
+     * The EV action definition.
      */
     interface RuleEventBridgeActionArgs {
         /**
-         * The name of the event bridge action.
+         * The name.
          */
         name: pulumi.Input<string>;
     }
-    /**
-     * The field of the case.
-     */
     interface RuleFieldArgs {
-        /**
-         * The Id of the field
-         */
         id: pulumi.Input<string>;
         value: pulumi.Input<inputs.connect.RuleFieldValueArgs>;
     }
     /**
-     * The value of the field.
+     * Object for case field values.
      */
     interface RuleFieldValueArgs {
         booleanValue?: pulumi.Input<boolean>;
@@ -16305,93 +16397,96 @@ export declare namespace connect {
      */
     interface RuleNotificationRecipientTypeArgs {
         /**
-         * The list of recipients by user arns.
+         * The Amazon Resource Name (ARN) of the user account.
          */
         userArns?: pulumi.Input<pulumi.Input<string>[]>;
         /**
-         * The collection of recipients who are identified by user tags
+         * The tags used to organize, track, or control access for this resource. For example, { "tags": {"key1":"value1", "key2":"value2"} }. CON users with the specified tags will be notified.
          */
         userTags?: pulumi.Input<{
             [key: string]: pulumi.Input<string>;
         }>;
     }
     /**
-     * A contact reference.
+     * Information about the reference when the ``referenceType`` is ``URL``. Otherwise, null. (Supports variable injection in the ``Value`` field.)
      */
     interface RuleReferenceArgs {
+        /**
+         * The type of the reference. ``DATE`` must be of type Epoch timestamp.
+         *   *Allowed values*: ``URL`` | ``ATTACHMENT`` | ``NUMBER`` | ``STRING`` | ``DATE`` | ``EMAIL``
+         */
         type: pulumi.Input<enums.connect.RuleReferenceType>;
+        /**
+         * A valid value for the reference. For example, for a URL reference, a formatted URL that is displayed to an agent in the Contact Control Panel (CCP).
+         */
         value: pulumi.Input<string>;
     }
     /**
-     * The definition for sending notification action.
+     * Information about the send notification action.
      */
     interface RuleSendNotificationActionArgs {
         /**
-         * The content of notification.
+         * Notification content. Supports variable injection. For more information, see [JSONPath reference](https://docs.aws.amazon.com/connect/latest/adminguide/contact-lens-variable-injection.html) in the *Administrators Guide*.
          */
         content: pulumi.Input<string>;
         /**
-         * The type of content.
+         * Content type format.
+         *   *Allowed value*: ``PLAIN_TEXT``
          */
         contentType: pulumi.Input<enums.connect.RuleSendNotificationActionContentType>;
         /**
-         * The means of delivery.
+         * Notification delivery method.
+         *   *Allowed value*: ``EMAIL``
          */
         deliveryMethod: pulumi.Input<enums.connect.RuleSendNotificationActionDeliveryMethod>;
+        /**
+         * Notification recipient.
+         */
         recipient: pulumi.Input<inputs.connect.RuleNotificationRecipientTypeArgs>;
         /**
-         * The subject of notification.
+         * The subject of the email if the delivery method is ``EMAIL``. Supports variable injection. For more information, see [JSONPath reference](https://docs.aws.amazon.com/connect/latest/adminguide/contact-lens-variable-injection.html) in the *Administrators Guide*.
          */
         subject?: pulumi.Input<string>;
     }
-    /**
-     * The definition of submit auto evaluation action.
-     */
     interface RuleSubmitAutoEvaluationActionArgs {
-        /**
-         * The Amazon Resource Name (ARN) of the evaluation form.
-         */
         evaluationFormArn: pulumi.Input<string>;
     }
     /**
-     * The definition of task action.
+     * Information about the task action. This field is required if ``TriggerEventSource`` is one of the following values: ``OnZendeskTicketCreate`` | ``OnZendeskTicketStatusUpdate`` | ``OnSalesforceCaseCreate``
      */
     interface RuleTaskActionArgs {
         /**
-         * The Amazon Resource Name (ARN) of the contact flow.
+         * The Amazon Resource Name (ARN) of the flow.
          */
         contactFlowArn: pulumi.Input<string>;
         /**
-         * The description which appears in the agent's Contact Control Panel (CCP).
+         * The description. Supports variable injection. For more information, see [JSONPath reference](https://docs.aws.amazon.com/connect/latest/adminguide/contact-lens-variable-injection.html) in the *Administrators Guide*.
          */
         description?: pulumi.Input<string>;
         /**
-         * The name which appears in the agent's Contact Control Panel (CCP).
+         * The name. Supports variable injection. For more information, see [JSONPath reference](https://docs.aws.amazon.com/connect/latest/adminguide/contact-lens-variable-injection.html) in the *Administrators Guide*.
          */
         name: pulumi.Input<string>;
         /**
-         * A formatted URL that is shown to an agent in the Contact Control Panel (CCP).
+         * Information about the reference when the ``referenceType`` is ``URL``. Otherwise, null. ``URL`` is the only accepted type. (Supports variable injection in the ``Value`` field.)
          */
         references?: pulumi.Input<{
             [key: string]: pulumi.Input<inputs.connect.RuleReferenceArgs>;
         }>;
     }
     /**
-     * The event source that will trigger the rule.
+     * The name of the event source.
      */
     interface RuleTriggerEventSourceArgs {
         /**
-         * The name of event source.
+         * The name of the event source.
          */
         eventSourceName: pulumi.Input<enums.connect.RuleTriggerEventSourceEventSourceName>;
         /**
-         * The Amazon Resource Name (ARN) for the AppIntegration association.
+         * The Amazon Resource Name (ARN) of the integration association. ``IntegrationAssociationArn`` is required if ``TriggerEventSource`` is one of the following values: ``OnZendeskTicketCreate`` | ``OnZendeskTicketStatusUpdate`` | ``OnSalesforceCaseCreate``
          */
         integrationAssociationArn?: pulumi.Input<string>;
     }
-    /**
-     * The definition for update case action.
-     */
     interface RuleUpdateCaseActionArgs {
         fields: pulumi.Input<pulumi.Input<inputs.connect.RuleFieldArgs>[]>;
     }
@@ -16595,11 +16690,11 @@ export declare namespace connect {
          */
         email?: pulumi.Input<string>;
         /**
-         * The first name. This is required if you are using Amazon Connect or SAML for identity management.
+         * The first name. This is required if you are using Amazon Connect or SAML for identity management. Inputs must be in Unicode Normalization Form C (NFC). Text containing characters in a non-NFC form (for example, decomposed characters or combining marks) are not accepted.
          */
         firstName?: pulumi.Input<string>;
         /**
-         * The last name. This is required if you are using Amazon Connect or SAML for identity management.
+         * The last name. This is required if you are using Amazon Connect or SAML for identity management. Inputs must be in Unicode Normalization Form C (NFC). Text containing characters in a non-NFC form (for example, decomposed characters or combining marks) are not accepted.
          */
         lastName?: pulumi.Input<string>;
         /**
@@ -16884,6 +16979,15 @@ export declare namespace connectcampaignsv2 {
          */
         agentlessConfig?: pulumi.Input<inputs.connectcampaignsv2.CampaignAgentlessConfigArgs>;
     }
+    /**
+     * The event trigger of the campaign
+     */
+    interface CampaignEventTriggerArgs {
+        /**
+         * The Amazon Resource Name (ARN) of the Customer Profiles domain.
+         */
+        customerProfilesDomainArn?: pulumi.Input<string>;
+    }
     /**
      * Local time zone config
      */
@@ -17001,13 +17105,17 @@ export declare namespace connectcampaignsv2 {
         agentlessConfig?: pulumi.Input<inputs.connectcampaignsv2.CampaignAgentlessConfigArgs>;
     }
     /**
-     * The possible types of channel config parameters
+     * The possible source of the campaign
      */
     interface CampaignSourceArgs {
         /**
          * The Amazon Resource Name (ARN) of the Customer Profiles segment.
          */
         customerProfilesSegmentArn?: pulumi.Input<string>;
+        /**
+         * The event trigger of the campaign.
+         */
+        eventTrigger?: pulumi.Input<inputs.connectcampaignsv2.CampaignEventTriggerArgs>;
     }
     /**
      * Telephony Channel Subtype config
@@ -21566,6 +21674,9 @@ export declare namespace ec2 {
         udpTimeout?: pulumi.Input<number>;
     }
     interface LaunchTemplateCpuArgs {
+        /**
+         * The instance family to use as the baseline reference for CPU performance. All instance types that match your specified attributes are compared against the CPU performance of the referenced instance family, regardless of CPU manufacturer or architecture differences.
+         */
         references?: pulumi.Input<pulumi.Input<inputs.ec2.LaunchTemplateReferenceArgs>[]>;
     }
     /**
@@ -21722,6 +21833,7 @@ export declare namespace ec2 {
          * The network interfaces for the instance.
          */
         networkInterfaces?: pulumi.Input<pulumi.Input<inputs.ec2.LaunchTemplateNetworkInterfaceArgs>[]>;
+        networkPerformanceOptions?: any;
         /**
          * The placement for the instance.
          */
@@ -23928,6 +24040,10 @@ export declare namespace ec2 {
          */
         userInfoEndpoint?: pulumi.Input<string>;
     }
+    interface VpcEndpointDnsOptionsSpecificationArgs {
+        dnsRecordIpType?: pulumi.Input<enums.ec2.VpcEndpointDnsOptionsSpecificationDnsRecordIpType>;
+        privateDnsOnlyForInboundResolverEndpoint?: pulumi.Input<enums.ec2.VpcEndpointDnsOptionsSpecificationPrivateDnsOnlyForInboundResolverEndpoint>;
+    }
     /**
      * Options for sending VPN tunnel logs to CloudWatch.
      */
@@ -24454,7 +24570,7 @@ export declare namespace ecs {
      */
     interface ServiceAwsVpcConfigurationArgs {
         /**
-         * Whether the task's elastic network interface receives a public IP address. The default value is ``DISABLED``.
+         * Whether the task's elastic network interface receives a public IP address. The default value is ``ENABLED``.
          */
         assignPublicIp?: pulumi.Input<enums.ecs.ServiceAwsVpcConfigurationAssignPublicIp>;
         /**
@@ -24676,7 +24792,7 @@ export declare namespace ecs {
         minimumHealthyPercent?: pulumi.Input<number>;
     }
     /**
-     * The deployment controller to use for the service. For more information, see [Amazon ECS deployment types](https://docs.aws.amazon.com/AmazonECS/latest/developerguide/deployment-types.html) in the *Amazon Elastic Container Service Developer Guide*.
+     * The deployment controller to use for the service.
      */
     interface ServiceDeploymentControllerArgs {
         /**
@@ -24974,13 +25090,17 @@ export declare namespace ecs {
          */
         name: pulumi.Input<string>;
     }
+    /**
+     * The VPC Lattice configuration for your service that holds the information for the target group(s) Amazon ECS tasks will be registered to.
+     */
     interface ServiceVpcLatticeConfigurationArgs {
         /**
-         * The name of the port mapping to register in the VPC Lattice target group. This is the name of the `portMapping` you defined in your task definition.
+         * The name of the port mapping to register in the VPC Lattice target group. This is the name of the ``portMapping`` you defined in your task definition.
          */
         portName: pulumi.Input<string>;
         /**
-         * The ARN of the IAM role to associate with this VPC Lattice configuration. This is the Amazon ECS infrastructure IAM role that is used to manage your VPC Lattice infrastructure.
+         * The ARN of the IAM role to associate with this VPC Lattice configuration. This is the Amazon ECS
+         *  infrastructure IAM role that is used to manage your VPC Lattice infrastructure.
          */
         roleArn: pulumi.Input<string>;
         /**
@@ -25386,7 +25506,7 @@ export declare namespace ecs {
      */
     interface TaskDefinitionEphemeralStorageArgs {
         /**
-         * The total amount, in GiB, of ephemeral storage to set for the task. The minimum supported value is ``20`` GiB and the maximum supported value is ``200`` GiB.
+         * The total amount, in GiB, of ephemeral storage to set for the task. The minimum supported value is ``21`` GiB and the maximum supported value is ``200`` GiB.
          */
         sizeInGiB?: pulumi.Input<number>;
     }
@@ -27781,6 +27901,19 @@ export declare namespace emrserverless {
         encryptionKeyArn?: pulumi.Input<string>;
         logUri?: pulumi.Input<string>;
     }
+    /**
+     * The scheduler configuration for batch and streaming jobs running on this application. Supported with release labels emr-7.0.0 and above.
+     */
+    interface ApplicationSchedulerConfigurationArgs {
+        /**
+         * The maximum concurrent job runs on this application. If scheduler configuration is enabled on your application, the default value is 15. The valid range is 1 to 1000.
+         */
+        maxConcurrentRuns?: pulumi.Input<number>;
+        /**
+         * The maximum duration in minutes for the job in QUEUED state. If scheduler configuration is enabled on your application, the default value is 360 minutes (6 hours). The valid range is from 15 to 720.
+         */
+        queueTimeoutMinutes?: pulumi.Input<number>;
+    }
     interface ApplicationWorkerConfigurationArgs {
         /**
          * Per worker CPU resource. vCPU is the only supported unit and specifying vCPU is optional.
@@ -28584,17 +28717,17 @@ export declare namespace events {
     }
     interface RuleSageMakerPipelineParameterArgs {
         /**
-         * Name of parameter to start execution of a SageMaker Model Building Pipeline.
+         * Name of parameter to start execution of a SageMaker AI Model Building Pipeline.
          */
         name: pulumi.Input<string>;
         /**
-         * Value of parameter to start execution of a SageMaker Model Building Pipeline.
+         * Value of parameter to start execution of a SageMaker AI Model Building Pipeline.
          */
         value: pulumi.Input<string>;
     }
     interface RuleSageMakerPipelineParametersArgs {
         /**
-         * List of Parameter names and values for SageMaker Model Building Pipeline execution.
+         * List of Parameter names and values for SageMaker AI Model Building Pipeline execution.
          */
         pipelineParameterList?: pulumi.Input<pulumi.Input<inputs.events.RuleSageMakerPipelineParameterArgs>[]>;
     }
@@ -28680,9 +28813,9 @@ export declare namespace events {
          */
         runCommandParameters?: pulumi.Input<inputs.events.RuleRunCommandParametersArgs>;
         /**
-         * Contains the SageMaker Model Building Pipeline parameters to start execution of a SageMaker Model Building Pipeline.
+         * Contains the SageMaker AI Model Building Pipeline parameters to start execution of a SageMaker AI Model Building Pipeline.
          *
-         * If you specify a SageMaker Model Building Pipeline as a target, you can use this to specify parameters to start a pipeline execution based on EventBridge events.
+         * If you specify a SageMaker AI Model Building Pipeline as a target, you can use this to specify parameters to start a pipeline execution based on EventBridge events.
          */
         sageMakerPipelineParameters?: pulumi.Input<inputs.events.RuleSageMakerPipelineParametersArgs>;
         /**
@@ -29050,7 +29183,7 @@ export declare namespace fis {
         /**
          * The data sources for the experiment report.
          */
-        dataSources: pulumi.Input<inputs.fis.ExperimentTemplateExperimentReportConfigurationDataSourcesPropertiesArgs>;
+        dataSources?: pulumi.Input<inputs.fis.ExperimentTemplateExperimentReportConfigurationDataSourcesPropertiesArgs>;
         /**
          * The output destinations of the experiment report.
          */
@@ -43694,6 +43827,305 @@ export declare namespace logs {
          */
         openSearchResourceConfig?: pulumi.Input<inputs.logs.IntegrationOpenSearchResourceConfigArgs>;
     }
+    interface TransformerAddKeyEntryArgs {
+        /**
+         * The key of the new entry to be added to the log event
+         */
+        key: pulumi.Input<string>;
+        /**
+         * Specifies whether to overwrite the value if the key already exists in the log event. If you omit this, the default is `false` .
+         */
+        overwriteIfExists?: pulumi.Input<boolean>;
+        /**
+         * The value of the new entry to be added to the log event
+         */
+        value: pulumi.Input<string>;
+    }
+    interface TransformerCopyValueEntryArgs {
+        overwriteIfExists?: pulumi.Input<boolean>;
+        source: pulumi.Input<string>;
+        target: pulumi.Input<string>;
+    }
+    interface TransformerMoveKeyEntryArgs {
+        overwriteIfExists?: pulumi.Input<boolean>;
+        source: pulumi.Input<string>;
+        target: pulumi.Input<string>;
+    }
+    interface TransformerParseCloudfrontArgs {
+        /**
+         * Omit this parameter and the whole log message will be processed by this processor. No other value than `@message` is allowed for `source` .
+         */
+        source?: pulumi.Input<string>;
+    }
+    interface TransformerParsePostgresArgs {
+        /**
+         * Omit this parameter and the whole log message will be processed by this processor. No other value than `@message` is allowed for `source` .
+         */
+        source?: pulumi.Input<string>;
+    }
+    interface TransformerParseRoute53Args {
+        /**
+         * Omit this parameter and the whole log message will be processed by this processor. No other value than `@message` is allowed for `source` .
+         */
+        source?: pulumi.Input<string>;
+    }
+    interface TransformerParseVpcArgs {
+        /**
+         * Omit this parameter and the whole log message will be processed by this processor. No other value than `@message` is allowed for `source` .
+         */
+        source?: pulumi.Input<string>;
+    }
+    interface TransformerParseWafArgs {
+        /**
+         * Omit this parameter and the whole log message will be processed by this processor. No other value than `@message` is allowed for `source` .
+         */
+        source?: pulumi.Input<string>;
+    }
+    /**
+     * Individual processor configuration
+     */
+    interface TransformerProcessorArgs {
+        /**
+         * Use this parameter to include the [addKeys](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-addKeys) processor in your transformer.
+         */
+        addKeys?: pulumi.Input<inputs.logs.TransformerProcessorAddKeysPropertiesArgs>;
+        /**
+         * Use this parameter to include the [copyValue](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-copyValue) processor in your transformer.
+         */
+        copyValue?: pulumi.Input<inputs.logs.TransformerProcessorCopyValuePropertiesArgs>;
+        /**
+         * Use this parameter to include the [CSV](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-CSV) processor in your transformer.
+         */
+        csv?: pulumi.Input<inputs.logs.TransformerProcessorCsvPropertiesArgs>;
+        /**
+         * Use this parameter to include the [datetimeConverter](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-datetimeConverter) processor in your transformer.
+         */
+        dateTimeConverter?: pulumi.Input<inputs.logs.TransformerProcessorDateTimeConverterPropertiesArgs>;
+        /**
+         * Use this parameter to include the [deleteKeys](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-deleteKeys) processor in your transformer.
+         */
+        deleteKeys?: pulumi.Input<inputs.logs.TransformerProcessorDeleteKeysPropertiesArgs>;
+        /**
+         * Use this parameter to include the [grok](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-grok) processor in your transformer.
+         */
+        grok?: pulumi.Input<inputs.logs.TransformerProcessorGrokPropertiesArgs>;
+        /**
+         * Use this parameter to include the [listToMap](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-listToMap) processor in your transformer.
+         */
+        listToMap?: pulumi.Input<inputs.logs.TransformerProcessorListToMapPropertiesArgs>;
+        /**
+         * Use this parameter to include the [lowerCaseString](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-lowerCaseString) processor in your transformer.
+         */
+        lowerCaseString?: pulumi.Input<inputs.logs.TransformerProcessorLowerCaseStringPropertiesArgs>;
+        /**
+         * Use this parameter to include the [moveKeys](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-moveKeys) processor in your transformer.
+         */
+        moveKeys?: pulumi.Input<inputs.logs.TransformerProcessorMoveKeysPropertiesArgs>;
+        /**
+         * Use this parameter to include the [parseCloudfront](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-parseCloudfront) processor in your transformer.
+         *
+         * If you use this processor, it must be the first processor in your transformer.
+         */
+        parseCloudfront?: pulumi.Input<inputs.logs.TransformerParseCloudfrontArgs>;
+        /**
+         * Use this parameter to include the [parseJSON](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-parseJSON) processor in your transformer.
+         */
+        parseJson?: pulumi.Input<inputs.logs.TransformerProcessorParseJsonPropertiesArgs>;
+        /**
+         * Use this parameter to include the [parseKeyValue](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-parseKeyValue) processor in your transformer.
+         */
+        parseKeyValue?: pulumi.Input<inputs.logs.TransformerProcessorParseKeyValuePropertiesArgs>;
+        /**
+         * Use this parameter to include the [parsePostGres](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-parsePostGres) processor in your transformer.
+         *
+         * If you use this processor, it must be the first processor in your transformer.
+         */
+        parsePostgres?: pulumi.Input<inputs.logs.TransformerParsePostgresArgs>;
+        /**
+         * Use this parameter to include the [parseRoute53](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-parseRoute53) processor in your transformer.
+         *
+         * If you use this processor, it must be the first processor in your transformer.
+         */
+        parseRoute53?: pulumi.Input<inputs.logs.TransformerParseRoute53Args>;
+        /**
+         * Use this parameter to include the [parseVPC](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-parseVPC) processor in your transformer.
+         *
+         * If you use this processor, it must be the first processor in your transformer.
+         */
+        parseVpc?: pulumi.Input<inputs.logs.TransformerParseVpcArgs>;
+        /**
+         * Use this parameter to include the [parseWAF](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-parseWAF) processor in your transformer.
+         *
+         * If you use this processor, it must be the first processor in your transformer.
+         */
+        parseWaf?: pulumi.Input<inputs.logs.TransformerParseWafArgs>;
+        /**
+         * Use this parameter to include the [renameKeys](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-renameKeys) processor in your transformer.
+         */
+        renameKeys?: pulumi.Input<inputs.logs.TransformerProcessorRenameKeysPropertiesArgs>;
+        /**
+         * Use this parameter to include the [splitString](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-splitString) processor in your transformer.
+         */
+        splitString?: pulumi.Input<inputs.logs.TransformerProcessorSplitStringPropertiesArgs>;
+        /**
+         * Use this parameter to include the [substituteString](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-substituteString) processor in your transformer.
+         */
+        substituteString?: pulumi.Input<inputs.logs.TransformerProcessorSubstituteStringPropertiesArgs>;
+        /**
+         * Use this parameter to include the [trimString](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-trimString) processor in your transformer.
+         */
+        trimString?: pulumi.Input<inputs.logs.TransformerProcessorTrimStringPropertiesArgs>;
+        /**
+         * Use this parameter to include the [typeConverter](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-typeConverter) processor in your transformer.
+         */
+        typeConverter?: pulumi.Input<inputs.logs.TransformerProcessorTypeConverterPropertiesArgs>;
+        /**
+         * Use this parameter to include the [upperCaseString](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-upperCaseString) processor in your transformer.
+         */
+        upperCaseString?: pulumi.Input<inputs.logs.TransformerProcessorUpperCaseStringPropertiesArgs>;
+    }
+    /**
+     * Use this parameter to include the [addKeys](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-addKeys) processor in your transformer.
+     */
+    interface TransformerProcessorAddKeysPropertiesArgs {
+        entries: pulumi.Input<pulumi.Input<inputs.logs.TransformerAddKeyEntryArgs>[]>;
+    }
+    /**
+     * Use this parameter to include the [copyValue](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-copyValue) processor in your transformer.
+     */
+    interface TransformerProcessorCopyValuePropertiesArgs {
+        entries: pulumi.Input<pulumi.Input<inputs.logs.TransformerCopyValueEntryArgs>[]>;
+    }
+    /**
+     * Use this parameter to include the [CSV](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-CSV) processor in your transformer.
+     */
+    interface TransformerProcessorCsvPropertiesArgs {
+        columns?: pulumi.Input<pulumi.Input<string>[]>;
+        delimiter?: pulumi.Input<string>;
+        quoteCharacter?: pulumi.Input<string>;
+        source?: pulumi.Input<string>;
+    }
+    /**
+     * Use this parameter to include the [datetimeConverter](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-datetimeConverter) processor in your transformer.
+     */
+    interface TransformerProcessorDateTimeConverterPropertiesArgs {
+        locale?: pulumi.Input<string>;
+        matchPatterns: pulumi.Input<pulumi.Input<string>[]>;
+        source: pulumi.Input<string>;
+        sourceTimezone?: pulumi.Input<string>;
+        target: pulumi.Input<string>;
+        targetFormat?: pulumi.Input<string>;
+        targetTimezone?: pulumi.Input<string>;
+    }
+    /**
+     * Use this parameter to include the [deleteKeys](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-deleteKeys) processor in your transformer.
+     */
+    interface TransformerProcessorDeleteKeysPropertiesArgs {
+        withKeys: pulumi.Input<pulumi.Input<string>[]>;
+    }
+    /**
+     * Use this parameter to include the [grok](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-grok) processor in your transformer.
+     */
+    interface TransformerProcessorGrokPropertiesArgs {
+        match: pulumi.Input<string>;
+        source?: pulumi.Input<string>;
+    }
+    /**
+     * Use this parameter to include the [listToMap](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-listToMap) processor in your transformer.
+     */
+    interface TransformerProcessorListToMapPropertiesArgs {
+        flatten?: pulumi.Input<boolean>;
+        flattenedElement?: pulumi.Input<enums.logs.TransformerProcessorListToMapPropertiesFlattenedElement>;
+        key: pulumi.Input<string>;
+        source: pulumi.Input<string>;
+        target?: pulumi.Input<string>;
+        valueKey?: pulumi.Input<string>;
+    }
+    /**
+     * Use this parameter to include the [lowerCaseString](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-lowerCaseString) processor in your transformer.
+     */
+    interface TransformerProcessorLowerCaseStringPropertiesArgs {
+        withKeys: pulumi.Input<pulumi.Input<string>[]>;
+    }
+    /**
+     * Use this parameter to include the [moveKeys](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-moveKeys) processor in your transformer.
+     */
+    interface TransformerProcessorMoveKeysPropertiesArgs {
+        entries: pulumi.Input<pulumi.Input<inputs.logs.TransformerMoveKeyEntryArgs>[]>;
+    }
+    /**
+     * Use this parameter to include the [parseJSON](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-parseJSON) processor in your transformer.
+     */
+    interface TransformerProcessorParseJsonPropertiesArgs {
+        destination?: pulumi.Input<string>;
+        source?: pulumi.Input<string>;
+    }
+    /**
+     * Use this parameter to include the [parseKeyValue](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-parseKeyValue) processor in your transformer.
+     */
+    interface TransformerProcessorParseKeyValuePropertiesArgs {
+        destination?: pulumi.Input<string>;
+        fieldDelimiter?: pulumi.Input<string>;
+        keyPrefix?: pulumi.Input<string>;
+        keyValueDelimiter?: pulumi.Input<string>;
+        nonMatchValue?: pulumi.Input<string>;
+        overwriteIfExists?: pulumi.Input<boolean>;
+        source?: pulumi.Input<string>;
+    }
+    /**
+     * Use this parameter to include the [renameKeys](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-renameKeys) processor in your transformer.
+     */
+    interface TransformerProcessorRenameKeysPropertiesArgs {
+        entries: pulumi.Input<pulumi.Input<inputs.logs.TransformerRenameKeyEntryArgs>[]>;
+    }
+    /**
+     * Use this parameter to include the [splitString](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-splitString) processor in your transformer.
+     */
+    interface TransformerProcessorSplitStringPropertiesArgs {
+        entries: pulumi.Input<pulumi.Input<inputs.logs.TransformerSplitStringEntryArgs>[]>;
+    }
+    /**
+     * Use this parameter to include the [substituteString](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-substituteString) processor in your transformer.
+     */
+    interface TransformerProcessorSubstituteStringPropertiesArgs {
+        entries: pulumi.Input<pulumi.Input<inputs.logs.TransformerSubstituteStringEntryArgs>[]>;
+    }
+    /**
+     * Use this parameter to include the [trimString](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-trimString) processor in your transformer.
+     */
+    interface TransformerProcessorTrimStringPropertiesArgs {
+        withKeys: pulumi.Input<pulumi.Input<string>[]>;
+    }
+    /**
+     * Use this parameter to include the [typeConverter](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-typeConverter) processor in your transformer.
+     */
+    interface TransformerProcessorTypeConverterPropertiesArgs {
+        entries: pulumi.Input<pulumi.Input<inputs.logs.TransformerTypeConverterEntryArgs>[]>;
+    }
+    /**
+     * Use this parameter to include the [upperCaseString](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatch-Logs-Transformation.html#CloudWatch-Logs-Transformation-upperCaseString) processor in your transformer.
+     */
+    interface TransformerProcessorUpperCaseStringPropertiesArgs {
+        withKeys: pulumi.Input<pulumi.Input<string>[]>;
+    }
+    interface TransformerRenameKeyEntryArgs {
+        key: pulumi.Input<string>;
+        overwriteIfExists?: pulumi.Input<boolean>;
+        renameTo: pulumi.Input<string>;
+    }
+    interface TransformerSplitStringEntryArgs {
+        delimiter: pulumi.Input<string>;
+        source: pulumi.Input<string>;
+    }
+    interface TransformerSubstituteStringEntryArgs {
+        from: pulumi.Input<string>;
+        source: pulumi.Input<string>;
+        to: pulumi.Input<string>;
+    }
+    interface TransformerTypeConverterEntryArgs {
+        key: pulumi.Input<string>;
+        type: pulumi.Input<enums.logs.TransformerTypeConverterEntryType>;
+    }
 }
 export declare namespace lookoutmetrics {
     interface AlertActionArgs {
@@ -47415,6 +47847,53 @@ export declare namespace networkmanager {
          */
         longitude?: pulumi.Input<string>;
     }
+    /**
+     * The attachment to move from one network function group to another.
+     */
+    interface DirectConnectGatewayAttachmentProposedNetworkFunctionGroupChangeArgs {
+        /**
+         * The rule number in the policy document that applies to this change.
+         */
+        attachmentPolicyRuleNumber?: pulumi.Input<number>;
+        /**
+         * The name of the network function group to change.
+         */
+        networkFunctionGroupName?: pulumi.Input<string>;
+        /**
+         * The key-value tags that changed for the network function group.
+         */
+        tags?: pulumi.Input<pulumi.Input<inputs.networkmanager.DirectConnectGatewayAttachmentTagArgs>[]>;
+    }
+    /**
+     * The attachment to move from one segment to another.
+     */
+    interface DirectConnectGatewayAttachmentProposedSegmentChangeArgs {
+        /**
+         * The rule number in the policy document that applies to this change.
+         */
+        attachmentPolicyRuleNumber?: pulumi.Input<number>;
+        /**
+         * The name of the segment to change.
+         */
+        segmentName?: pulumi.Input<string>;
+        /**
+         * The key-value tags that changed for the segment.
+         */
+        tags?: pulumi.Input<pulumi.Input<inputs.networkmanager.DirectConnectGatewayAttachmentTagArgs>[]>;
+    }
+    /**
+     * A key-value pair to associate with a resource.
+     */
+    interface DirectConnectGatewayAttachmentTagArgs {
+        /**
+         * The key name of the tag. You can specify a value that is 1 to 128 Unicode characters in length and cannot be prefixed with aws:. You can use any of the following characters: the set of Unicode letters, digits, whitespace, _, ., /, =, +, and -.
+         */
+        key: pulumi.Input<string>;
+        /**
+         * The value for the tag. You can specify a value that is 0 to 256 Unicode characters in length and cannot be prefixed with aws:. You can use any of the following characters: the set of Unicode letters, digits, whitespace, _, ., /, =, +, and -.
+         */
+        value: pulumi.Input<string>;
+    }
     /**
      * The bandwidth for the link.
      */
@@ -49553,11 +50032,11 @@ export declare namespace pipes {
     }
     interface PipeSageMakerPipelineParameterArgs {
         /**
-         * Name of parameter to start execution of a SageMaker Model Building Pipeline.
+         * Name of parameter to start execution of a SageMaker AI Model Building Pipeline.
          */
         name: pulumi.Input<string>;
         /**
-         * Value of parameter to start execution of a SageMaker Model Building Pipeline.
+         * Value of parameter to start execution of a SageMaker AI Model Building Pipeline.
          */
         value: pulumi.Input<string>;
     }
@@ -50054,7 +50533,7 @@ export declare namespace pipes {
          */
         redshiftDataParameters?: pulumi.Input<inputs.pipes.PipeTargetRedshiftDataParametersArgs>;
         /**
-         * The parameters for using a SageMaker pipeline as a target.
+         * The parameters for using a SageMaker AI pipeline as a target.
          */
         sageMakerPipelineParameters?: pulumi.Input<inputs.pipes.PipeTargetSageMakerPipelineParametersArgs>;
         /**
@@ -50098,7 +50577,7 @@ export declare namespace pipes {
     }
     interface PipeTargetSageMakerPipelineParametersArgs {
         /**
-         * List of Parameter names and values for SageMaker Model Building Pipeline execution.
+         * List of Parameter names and values for SageMaker AI Model Building Pipeline execution.
          */
         pipelineParameterList?: pulumi.Input<pulumi.Input<inputs.pipes.PipeSageMakerPipelineParameterArgs>[]>;
     }
@@ -50218,29 +50697,77 @@ export declare namespace qbusiness {
         qAppsControlMode: pulumi.Input<enums.qbusiness.ApplicationQAppsControlMode>;
     }
     interface ApplicationQuickSightConfigurationArgs {
+        /**
+         * The Amazon QuickSight namespace that is used as the identity provider. For more information about QuickSight namespaces, see [Namespace operations](https://docs.aws.amazon.com/quicksight/latest/developerguide/namespace-operations.html) .
+         */
         clientNamespace: pulumi.Input<string>;
     }
     interface DataAccessorActionConfigurationArgs {
+        /**
+         * The Amazon Q Business action that is allowed.
+         */
         action: pulumi.Input<string>;
+        /**
+         * The filter configuration for the action, if any.
+         */
         filterConfiguration?: pulumi.Input<inputs.qbusiness.DataAccessorActionFilterConfigurationArgs>;
     }
     interface DataAccessorActionFilterConfigurationArgs {
+        /**
+         * Enables filtering of responses based on document attributes or metadata fields.
+         */
         documentAttributeFilter: pulumi.Input<inputs.qbusiness.DataAccessorAttributeFilterArgs>;
     }
     interface DataAccessorAttributeFilterArgs {
+        /**
+         * Performs a logical `AND` operation on all supplied filters.
+         */
         andAllFilters?: pulumi.Input<pulumi.Input<inputs.qbusiness.DataAccessorAttributeFilterArgs>[]>;
+        /**
+         * Returns `true` when a document contains all the specified document attributes or metadata fields. Supported for the following [document attribute value types](https://docs.aws.amazon.com/amazonq/latest/api-reference/API_DocumentAttributeValue.html) : `stringListValue` .
+         */
         containsAll?: pulumi.Input<inputs.qbusiness.DataAccessorDocumentAttributeArgs>;
+        /**
+         * Returns `true` when a document contains any of the specified document attributes or metadata fields. Supported for the following [document attribute value types](https://docs.aws.amazon.com/amazonq/latest/api-reference/API_DocumentAttributeValue.html) : `stringListValue` .
+         */
         containsAny?: pulumi.Input<inputs.qbusiness.DataAccessorDocumentAttributeArgs>;
+        /**
+         * Performs an equals operation on two document attributes or metadata fields. Supported for the following [document attribute value types](https://docs.aws.amazon.com/amazonq/latest/api-reference/API_DocumentAttributeValue.html) : `dateValue` , `longValue` , `stringListValue` and `stringValue` .
+         */
         equalsTo?: pulumi.Input<inputs.qbusiness.DataAccessorDocumentAttributeArgs>;
+        /**
+         * Performs a greater than operation on two document attributes or metadata fields. Supported for the following [document attribute value types](https://docs.aws.amazon.com/amazonq/latest/api-reference/API_DocumentAttributeValue.html) : `dateValue` and `longValue` .
+         */
         greaterThan?: pulumi.Input<inputs.qbusiness.DataAccessorDocumentAttributeArgs>;
+        /**
+         * Performs a greater or equals than operation on two document attributes or metadata fields. Supported for the following [document attribute value types](https://docs.aws.amazon.com/amazonq/latest/api-reference/API_DocumentAttributeValue.html) : `dateValue` and `longValue` .
+         */
         greaterThanOrEquals?: pulumi.Input<inputs.qbusiness.DataAccessorDocumentAttributeArgs>;
+        /**
+         * Performs a less than operation on two document attributes or metadata fields. Supported for the following [document attribute value types](https://docs.aws.amazon.com/amazonq/latest/api-reference/API_DocumentAttributeValue.html) : `dateValue` and `longValue` .
+         */
         lessThan?: pulumi.Input<inputs.qbusiness.DataAccessorDocumentAttributeArgs>;
+        /**
+         * Performs a less than or equals operation on two document attributes or metadata fields.Supported for the following [document attribute value type](https://docs.aws.amazon.com/amazonq/latest/api-reference/API_DocumentAttributeValue.html) : `dateValue` and `longValue` .
+         */
         lessThanOrEquals?: pulumi.Input<inputs.qbusiness.DataAccessorDocumentAttributeArgs>;
+        /**
+         * Performs a logical `NOT` operation on all supplied filters.
+         */
         notFilter?: pulumi.Input<inputs.qbusiness.DataAccessorAttributeFilterArgs>;
+        /**
+         * Performs a logical `OR` operation on all supplied filters.
+         */
         orAllFilters?: pulumi.Input<pulumi.Input<inputs.qbusiness.DataAccessorAttributeFilterArgs>[]>;
     }
     interface DataAccessorDocumentAttributeArgs {
+        /**
+         * The identifier for the attribute.
+         */
         name: pulumi.Input<string>;
+        /**
+         * The value of the attribute.
+         */
         value: pulumi.Input<inputs.qbusiness.DataAccessorDocumentAttributeValue0PropertiesArgs | inputs.qbusiness.DataAccessorDocumentAttributeValue1PropertiesArgs | inputs.qbusiness.DataAccessorDocumentAttributeValue2PropertiesArgs | inputs.qbusiness.DataAccessorDocumentAttributeValue3PropertiesArgs>;
     }
     interface DataAccessorDocumentAttributeValue0PropertiesArgs {
@@ -50338,6 +50865,9 @@ export declare namespace qbusiness {
         s3BucketName?: pulumi.Input<string>;
     }
     interface DataSourceImageExtractionConfigurationArgs {
+        /**
+         * Specify whether to extract semantic meaning from images and visuals from documents.
+         */
         imageExtractionStatus: pulumi.Input<enums.qbusiness.DataSourceImageExtractionStatus>;
     }
     interface DataSourceInlineDocumentEnrichmentConfigurationArgs {
@@ -50355,6 +50885,9 @@ export declare namespace qbusiness {
         target?: pulumi.Input<inputs.qbusiness.DataSourceDocumentAttributeTargetArgs>;
     }
     interface DataSourceMediaExtractionConfigurationArgs {
+        /**
+         * The configuration for extracting semantic meaning from images in documents. For more information, see [Extracting semantic meaning from images and visuals](https://docs.aws.amazon.com/amazonq/latest/qbusiness-ug/extracting-meaning-from-images.html) .
+         */
         imageExtractionConfiguration?: pulumi.Input<inputs.qbusiness.DataSourceImageExtractionConfigurationArgs>;
     }
     interface DataSourceVpcConfigurationArgs {
@@ -50445,9 +50978,21 @@ export declare namespace qbusiness {
         indexId: pulumi.Input<string>;
     }
     interface WebExperienceCustomizationConfigurationArgs {
+        /**
+         * Provides the URL where the custom CSS file is hosted for an Amazon Q web experience.
+         */
         customCssUrl?: pulumi.Input<string>;
+        /**
+         * Provides the URL where the custom favicon file is hosted for an Amazon Q web experience.
+         */
         faviconUrl?: pulumi.Input<string>;
+        /**
+         * Provides the URL where the custom font file is hosted for an Amazon Q web experience.
+         */
         fontUrl?: pulumi.Input<string>;
+        /**
+         * Provides the URL where the custom logo file is hosted for an Amazon Q web experience.
+         */
         logoUrl?: pulumi.Input<string>;
     }
     interface WebExperienceIdentityProviderConfiguration0PropertiesArgs {
@@ -67220,6 +67765,9 @@ export declare namespace quicksight {
          */
         parameterName: pulumi.Input<string>;
     }
+    interface DataSetPerformanceConfigurationArgs {
+        uniqueKeys?: pulumi.Input<pulumi.Input<inputs.quicksight.DataSetUniqueKeyArgs>[]>;
+    }
     /**
      * <p>A view of a data source that contains information about the shape of the data in the
      *             underlying source. This is a variant type structure. For this structure to be valid,
@@ -67503,6 +68051,9 @@ export declare namespace quicksight {
         tagColumnOperation?: pulumi.Input<inputs.quicksight.DataSetTagColumnOperationArgs>;
         untagColumnOperation?: pulumi.Input<inputs.quicksight.DataSetUntagColumnOperationArgs>;
     }
+    interface DataSetUniqueKeyArgs {
+        columnNames: pulumi.Input<pulumi.Input<string>[]>;
+    }
     /**
      * <p>A transform operation that removes tags associated with a column.</p>
      */
@@ -77260,7 +77811,13 @@ export declare namespace redshiftserverless {
         parameterValue?: pulumi.Input<string>;
     }
     interface WorkgroupPerformanceTargetArgs {
+        /**
+         * The target price performance level for the workgroup. Valid values include 1, 25, 50, 75, and 100. These correspond to the price performance levels LOW_COST, ECONOMICAL, BALANCED, RESOURCEFUL, and HIGH_PERFORMANCE.
+         */
         level?: pulumi.Input<number>;
+        /**
+         * Whether the price performance target is enabled for the workgroup.
+         */
         status?: pulumi.Input<enums.redshiftserverless.WorkgroupPerformanceTargetStatus>;
     }
 }
@@ -78758,27 +79315,6 @@ export declare namespace s3 {
          */
         targetObjectKeyFormat?: pulumi.Input<inputs.s3.BucketTargetObjectKeyFormatArgs>;
     }
-    interface BucketMetadataTableConfigurationArgs {
-        /**
-         * Returns the <code>Error</code> value of the GetBucketMetadataTableConfiguration response.
-         */
-        error?: pulumi.Input<inputs.s3.BucketMetadataTableErrorArgs>;
-        s3TablesDestination: pulumi.Input<inputs.s3.BucketS3TablesDestinationArgs>;
-        /**
-         * Returns the <code>Status</code> value of the <code>GetBucketMetadataTableConfigurationResult</code> response. This value indicates the status of the metadata table. The status values are:<br/><code>CREATING</code> - The metadata table is in the process of being created in the specified table bucket.<br/><code>ACTIVE</code> - The metadata table has been created successfully and records are being delivered to the table.<br/><code>FAILED</code> - Amazon S3 is unable to create the metadata table, or Amazon S3 is unable to deliver records.
-         */
-        status?: pulumi.Input<string>;
-    }
-    interface BucketMetadataTableErrorArgs {
-        /**
-         * If the <code>CreateBucketMetadataTableConfiguration</code> request succeeds, but S3 Metadata was unable to create the table, this structure contains the error code. The possible error codes and error messages are as follows:<br/><code>AccessDeniedCreatingResources</code> - You don't have sufficient permissions to create the required resources. Make sure that you have <code>s3tables:CreateNamespace</code>, <code>s3tables:CreateTable</code>, <code>s3tables:GetTable</code> and <code>s3tables:PutTablePolicy</code> permissions, and then try again. To create a new metadata table, you must delete the metadata configuration for this bucket, and then create a new metadata configuration.<br/><code>AccessDeniedWritingToTable</code> - Unable to write to the metadata table because of missing resource permissions. To fix the resource policy, Amazon S3 needs to create a new metadata table. To create a new metadata table, you must delete the metadata configuration for this bucket, and then create a new metadata configuration.<br/><code>DestinationTableNotFound</code> - The destination table doesn't exist. To create a new metadata table, you must delete the metadata configuration for this bucket, and then create a new metadata configuration.<br/><code>ServerInternalError</code> - An internal error has occurred. To create a new metadata table, you must delete the metadata configuration for this bucket, and then create a new metadata configuration.<br/><code>TableAlreadyExists</code> - The table that you specified already exists in the table bucket's namespace. Specify a different table name. To create a new metadata table, you must delete the metadata configuration for this bucket, and then create a new metadata configuration.<br/><code>TableBucketNotFound</code> - The table bucket that you specified doesn't exist in this AWS Region and account. Create or choose a different table bucket. To create a new metadata table, you must delete the metadata configuration for this bucket, and then create a new metadata configuration.
-         */
-        errorCode: pulumi.Input<string>;
-        /**
-         * If the <code>CreateBucketMetadataTableConfiguration</code> request succeeds, but S3 Metadata was unable to create the table, this structure contains the error code. The possible error codes and error messages are as follows:<br/><code>AccessDeniedCreatingResources</code> - You don't have sufficient permissions to create the required resources. Make sure that you have <code>s3tables:CreateNamespace</code>, <code>s3tables:CreateTable</code>, <code>s3tables:GetTable</code> and <code>s3tables:PutTablePolicy</code> permissions, and then try again. To create a new metadata table, you must delete the metadata configuration for this bucket, and then create a new metadata configuration.<br/><code>AccessDeniedWritingToTable</code> - Unable to write to the metadata table because of missing resource permissions. To fix the resource policy, Amazon S3 needs to create a new metadata table. To create a new metadata table, you must delete the metadata configuration for this bucket, and then create a new metadata configuration.<br/><code>DestinationTableNotFound</code> - The destination table doesn't exist. To create a new metadata table, you must delete the metadata configuration for this bucket, and then create a new metadata configuration.<br/><code>ServerInternalError</code> - An internal error has occurred. To create a new metadata table, you must delete the metadata configuration for this bucket, and then create a new metadata configuration.<br/><code>TableAlreadyExists</code> - The table that you specified already exists in the table bucket's namespace. Specify a different table name. To create a new metadata table, you must delete the metadata configuration for this bucket, and then create a new metadata configuration.<br/><code>TableBucketNotFound</code> - The table bucket that you specified doesn't exist in this AWS Region and account. Create or choose a different table bucket. To create a new metadata table, you must delete the metadata configuration for this bucket, and then create a new metadata configuration.
-         */
-        errorMessage: pulumi.Input<string>;
-    }
     /**
      * A container specifying replication metrics-related settings enabling replication metrics and events.
      */
@@ -79274,24 +79810,6 @@ export declare namespace s3 {
          */
         rules: pulumi.Input<pulumi.Input<inputs.s3.BucketFilterRuleArgs>[]>;
     }
-    interface BucketS3TablesDestinationArgs {
-        /**
-         * The Amazon Resource Name (ARN) for the metadata table in the metadata table configuration. The specified metadata table name must be unique within the <code>aws_s3_metadata</code> namespace in the destination table bucket.
-         */
-        tableArn?: pulumi.Input<string>;
-        /**
-         * The Amazon Resource Name (ARN) for the table bucket that's specified as the destination in the metadata table configuration. The destination table bucket must be in the same Region and AWS account as the general purpose bucket.
-         */
-        tableBucketArn: pulumi.Input<string>;
-        /**
-         * The name for the metadata table in your metadata table configuration. The specified metadata table name must be unique within the <code>aws_s3_metadata</code> namespace in the destination table bucket.
-         */
-        tableName: pulumi.Input<string>;
-        /**
-         * The table bucket namespace for the metadata table in your metadata table configuration. This value is always <code>aws_s3_metadata</code>.
-         */
-        tableNamespace?: pulumi.Input<string>;
-    }
     /**
      * Describes the default server-side encryption to apply to new objects in the bucket. If a PUT Object request doesn't specify any server-side encryption, this default encryption will be applied. For more information, see [PutBucketEncryption](https://docs.aws.amazon.com/AmazonS3/latest/API/RESTBucketPUTencryption.html).
      *    +   *General purpose buckets* - If you don't specify a customer managed key at configuration, Amazon S3 automatically creates an AWS KMS key (``aws/s3``) in your AWS account the first time that you add an object encrypted with SSE-KMS to a bucket. By default, Amazon S3 uses this KMS key for SSE-KMS.
@@ -80685,7 +81203,7 @@ export declare namespace sagemaker {
      */
     interface DomainDefaultSpaceSettingsArgs {
         /**
-         * The settings for assigning a custom file system to a domain. Permitted users can access this file system in Amazon SageMaker Studio.
+         * The settings for assigning a custom file system to a domain. Permitted users can access this file system in Amazon SageMaker AI Studio.
          */
         customFileSystemConfigs?: pulumi.Input<pulumi.Input<inputs.sagemaker.DomainCustomFileSystemConfigArgs>[]>;
         /**
@@ -80745,7 +81263,7 @@ export declare namespace sagemaker {
          */
         fileSystemId: pulumi.Input<string>;
         /**
-         * The path to the file system directory that is accessible in Amazon SageMaker Studio. Permitted users can access only this directory and below.
+         * The path to the file system directory that is accessible in Amazon SageMaker AI Studio. Permitted users can access only this directory and below.
          */
         fileSystemPath?: pulumi.Input<string>;
     }
@@ -80949,7 +81467,7 @@ export declare namespace sagemaker {
          */
         codeEditorAppSettings?: pulumi.Input<inputs.sagemaker.DomainCodeEditorAppSettingsArgs>;
         /**
-         * The settings for assigning a custom file system to a user profile. Permitted users can access this file system in Amazon SageMaker Studio.
+         * The settings for assigning a custom file system to a user profile. Permitted users can access this file system in Amazon SageMaker AI Studio.
          *
          * SageMaker applies these settings only to private spaces that the user creates in the domain. SageMaker doesn't apply these settings to shared spaces.
          */
@@ -81286,7 +81804,7 @@ export declare namespace sagemaker {
          */
         container?: pulumi.Input<inputs.sagemaker.InferenceComponentContainerSpecificationArgs>;
         /**
-         * The name of an existing SageMaker model object in your account that you want to deploy with the inference component.
+         * The name of an existing SageMaker AI model object in your account that you want to deploy with the inference component.
          */
         modelName?: pulumi.Input<string>;
         /**
@@ -82099,7 +82617,7 @@ export declare namespace sagemaker {
      */
     interface ModelCardTrainingMetricArgs {
         /**
-         * The name of the result from the SageMaker training job.
+         * The name of the result from the SageMaker AI training job.
          */
         name: pulumi.Input<string>;
         /**
@@ -82107,7 +82625,7 @@ export declare namespace sagemaker {
          */
         notes?: pulumi.Input<string>;
         /**
-         * The value of a result from the SageMaker training job.
+         * The value of a result from the SageMaker AI training job.
          */
         value: pulumi.Input<number>;
     }
@@ -83467,7 +83985,7 @@ export declare namespace sagemaker {
          */
         monitoringAppSpecification: pulumi.Input<inputs.sagemaker.MonitoringScheduleMonitoringAppSpecificationArgs>;
         /**
-         * The array of inputs for the monitoring job. Currently we support monitoring an Amazon SageMaker Endpoint.
+         * The array of inputs for the monitoring job. Currently we support monitoring an Amazon SageMaker AI Endpoint.
          */
         monitoringInputs: pulumi.Input<pulumi.Input<inputs.sagemaker.MonitoringScheduleMonitoringInputArgs>[]>;
         /**
@@ -83857,7 +84375,7 @@ export declare namespace sagemaker {
      */
     interface SpaceJupyterServerAppSettingsArgs {
         /**
-         * The default instance type and the Amazon Resource Name (ARN) of the default SageMaker image used by the JupyterServer app. If you use the `LifecycleConfigArns` parameter, then this parameter is also required.
+         * The default instance type and the Amazon Resource Name (ARN) of the default SageMaker AI image used by the JupyterServer app. If you use the `LifecycleConfigArns` parameter, then this parameter is also required.
          */
         defaultResourceSpec?: pulumi.Input<inputs.sagemaker.SpaceResourceSpecArgs>;
         /**
@@ -83919,7 +84437,7 @@ export declare namespace sagemaker {
          */
         codeEditorAppSettings?: pulumi.Input<inputs.sagemaker.SpaceCodeEditorAppSettingsArgs>;
         /**
-         * A file system, created by you, that you assign to a space for an Amazon SageMaker Domain. Permitted users can access this file system in Amazon SageMaker Studio.
+         * A file system, created by you, that you assign to a space for an Amazon SageMaker AI Domain. Permitted users can access this file system in Amazon SageMaker AI Studio.
          */
         customFileSystems?: pulumi.Input<pulumi.Input<inputs.sagemaker.SpaceCustomFileSystemArgs>[]>;
         /**
@@ -84045,7 +84563,7 @@ export declare namespace sagemaker {
          */
         fileSystemId: pulumi.Input<string>;
         /**
-         * The path to the file system directory that is accessible in Amazon SageMaker Studio. Permitted users can access only this directory and below.
+         * The path to the file system directory that is accessible in Amazon SageMaker AI Studio. Permitted users can access only this directory and below.
          */
         fileSystemPath?: pulumi.Input<string>;
     }
@@ -84194,7 +84712,7 @@ export declare namespace sagemaker {
          */
         codeEditorAppSettings?: pulumi.Input<inputs.sagemaker.UserProfileCodeEditorAppSettingsArgs>;
         /**
-         * The settings for assigning a custom file system to a user profile. Permitted users can access this file system in Amazon SageMaker Studio.
+         * The settings for assigning a custom file system to a user profile. Permitted users can access this file system in Amazon SageMaker AI Studio.
          *
          * SageMaker applies these settings only to private spaces that the user creates in the domain. SageMaker doesn't apply these settings to shared spaces.
          */
@@ -88692,12 +89210,33 @@ export declare namespace vpclattice {
          */
         weight?: pulumi.Input<number>;
     }
+    /**
+     * Identifies the resource configuration in one of the following ways:
+     *
+     * - *Amazon Resource Name (ARN)* - Supported resource-types that are provisioned by AWS services, such as RDS databases, can be identified by their ARN.
+     * - *Domain name* - Any domain name that is publicly resolvable.
+     * - *IP address* - For IPv4 and IPv6, only IP addresses in the VPC are supported.
+     */
     interface ResourceConfigurationDefinition0PropertiesArgs {
         ipResource: pulumi.Input<string>;
     }
+    /**
+     * Identifies the resource configuration in one of the following ways:
+     *
+     * - *Amazon Resource Name (ARN)* - Supported resource-types that are provisioned by AWS services, such as RDS databases, can be identified by their ARN.
+     * - *Domain name* - Any domain name that is publicly resolvable.
+     * - *IP address* - For IPv4 and IPv6, only IP addresses in the VPC are supported.
+     */
     interface ResourceConfigurationDefinition1PropertiesArgs {
         arnResource: pulumi.Input<string>;
     }
+    /**
+     * Identifies the resource configuration in one of the following ways:
+     *
+     * - *Amazon Resource Name (ARN)* - Supported resource-types that are provisioned by AWS services, such as RDS databases, can be identified by their ARN.
+     * - *Domain name* - Any domain name that is publicly resolvable.
+     * - *IP address* - For IPv4 and IPv6, only IP addresses in the VPC are supported.
+     */
     interface ResourceConfigurationDefinition2PropertiesArgs {
         dnsResource: pulumi.Input<inputs.vpclattice.ResourceConfigurationDnsResourceArgs>;
     }
@@ -88828,6 +89367,9 @@ export declare namespace vpclattice {
         hostedZoneId?: pulumi.Input<string>;
     }
     interface ServiceNetworkSharingConfigArgs {
+        /**
+         * Specify if the service network should be enabled for sharing.
+         */
         enabled: pulumi.Input<boolean>;
     }
     interface TargetGroupConfigArgs {
@@ -91832,8 +92374,17 @@ export declare namespace wisdom {
      * Content filter config in content policy.
      */
     interface AiGuardrailGuardrailContentFilterConfigArgs {
+        /**
+         * The strength of the input for the guardrail content filter.
+         */
         inputStrength: pulumi.Input<enums.wisdom.AiGuardrailGuardrailFilterStrength>;
+        /**
+         * The output strength of the guardrail content filter.
+         */
         outputStrength: pulumi.Input<enums.wisdom.AiGuardrailGuardrailFilterStrength>;
+        /**
+         * The type of the guardrail content filter.
+         */
         type: pulumi.Input<enums.wisdom.AiGuardrailGuardrailContentFilterType>;
     }
     /**
@@ -91844,18 +92395,27 @@ export declare namespace wisdom {
          * The threshold for this filter.
          */
         threshold: pulumi.Input<number>;
+        /**
+         * The type of this filter.
+         */
         type: pulumi.Input<enums.wisdom.AiGuardrailGuardrailContextualGroundingFilterType>;
     }
     /**
      * A managed words config.
      */
     interface AiGuardrailGuardrailManagedWordsConfigArgs {
+        /**
+         * The type of guardrail managed words.
+         */
         type: pulumi.Input<enums.wisdom.AiGuardrailGuardrailManagedWordsType>;
     }
     /**
      * Pii entity configuration.
      */
     interface AiGuardrailGuardrailPiiEntityConfigArgs {
+        /**
+         * The action of guardrail PII entity configuration.
+         */
         action: pulumi.Input<enums.wisdom.AiGuardrailGuardrailSensitiveInformationAction>;
         type: pulumi.Input<enums.wisdom.AiGuardrailGuardrailPiiEntityType>;
     }
@@ -91863,6 +92423,9 @@ export declare namespace wisdom {
      * A regex configuration.
      */
     interface AiGuardrailGuardrailRegexConfigArgs {
+        /**
+         * The action of the guardrail regex configuration.
+         */
         action: pulumi.Input<enums.wisdom.AiGuardrailGuardrailSensitiveInformationAction>;
         /**
          * The regex description.
@@ -91893,6 +92456,9 @@ export declare namespace wisdom {
          * Name of topic in topic policy
          */
         name: pulumi.Input<string>;
+        /**
+         * Type of topic in a policy.
+         */
         type: pulumi.Input<enums.wisdom.AiGuardrailGuardrailTopicType>;
     }
     /**
@@ -91923,9 +92489,18 @@ export declare namespace wisdom {
         objectFields?: pulumi.Input<pulumi.Input<string>[]>;
     }
     interface KnowledgeBaseBedrockFoundationModelConfigurationArgs {
+        /**
+         * The model ARN of the Bedrock foundation model.
+         */
         modelArn: pulumi.Input<string>;
+        /**
+         * The parsing prompt of the Bedrock foundation model configuration.
+         */
         parsingPrompt?: pulumi.Input<inputs.wisdom.KnowledgeBaseBedrockFoundationModelConfigurationParsingPromptPropertiesArgs>;
     }
+    /**
+     * The parsing prompt of the Bedrock foundation model configuration.
+     */
     interface KnowledgeBaseBedrockFoundationModelConfigurationParsingPromptPropertiesArgs {
         parsingPromptText: pulumi.Input<string>;
     }