@pulumi/alicloud 3.49.0 → 3.49.1

package/types/output.d.ts

@@ -34693,33 +34693,65 @@ export declare namespace nlb {
          */
         zoneId: string;
     }
+    interface LoadBalancerDeletionProtectionConfig {
+        /**
+         * Delete protection enable.
+         */
+        enabled: boolean;
+        /**
+         * Opening time.
+         */
+        enabledTime: string;
+        /**
+         * Reason for opening.
+         */
+        reason: string;
+    }
+    interface LoadBalancerModificationProtectionConfig {
+        /**
+         * Opening time.
+         */
+        enabledTime: string;
+        /**
+         * Reason for opening.
+         */
+        reason: string;
+        /**
+         * ON.
+         */
+        status: string;
+    }
     interface LoadBalancerZoneMapping {
         /**
-         * The ID of the EIP associated with the Internet-facing NLB instance.
+         * The ID of the elastic IP address.
          */
         allocationId: string;
         /**
-         * The ID of the elastic network interface (ENI).
+         * The ID of ENI.
          */
         eniId: string;
         /**
-         * The IPv6 address of the NLB instance.
+         * The IPv6 address of a network-based server load balancer instance.
          */
         ipv6Address: string;
         /**
-         * The private IPv4 address of the NLB instance.
+         * The private IPv4 address of a network-based server load balancer instance.
          */
         privateIpv4Address: string;
         /**
-         * The public IPv4 address of the NLB instance.
+         * Public IPv4 address of a network-based server load balancer instance.
          */
         publicIpv4Address: string;
         /**
-         * The vSwitch in the zone. You can specify only one vSwitch (subnet) in each zone of an NLB instance.
+         * Zone Status.
+         */
+        status: string;
+        /**
+         * The switch corresponding to the zone. Each zone uses one switch and one subnet by default.
          */
         vswitchId: string;
         /**
-         * The ID of the zone of the NLB instance.
+         * The name of the zone. You can call the DescribeZones operation to obtain the name of the zone.
          */
         zoneId: string;
     }
@@ -47662,23 +47694,27 @@ export declare namespace vpn {
         customerGatewayId: string;
         effectImmediately: boolean;
         /**
-         * Specifies whether to enable the dead peer detection (DPD) feature.
+         * Wether enable Dpd detection.
          */
         enableDpd: boolean;
         /**
-         * Specifies whether to enable NAT traversal.
+         * enable nat traversal.
          */
         enableNatTraversal: boolean;
+        /**
+         * Enable tunnel bgp.
+         */
+        enableTunnelsBgp: boolean;
         /**
          * ID of the VPN connection.
          */
         id: string;
         /**
-         * The configurations of phase-one negotiation.
+         * The ikeConfig mapping supports the following:
          */
         ikeConfigs?: outputs.vpn.GetConnectionsConnectionIkeConfig[];
         /**
-         * The configurations of phase-two negotiation.
+         * The ipsecConfig mapping supports the following:
          */
         ipsecConfigs?: outputs.vpn.GetConnectionsConnectionIpsecConfig[];
         /**
@@ -47697,9 +47733,13 @@ export declare namespace vpn {
          * The negotiation status of the BGP routing protocol. Valid values: `success`, `false`.
          */
         status: string;
+        /**
+         * The tunnelOptionsSpecification supports the following:
+         */
+        tunnelOptionsSpecifications: outputs.vpn.GetConnectionsConnectionTunnelOptionsSpecification[];
         vcoHealthChecks?: outputs.vpn.GetConnectionsConnectionVcoHealthCheck[];
         /**
-         * The configuration information for BGP.
+         * The vpnBgpConfig mapping supports the following:
          */
         vpnBgpConfigs?: outputs.vpn.GetConnectionsConnectionVpnBgpConfig[];
         /**
@@ -47709,15 +47749,15 @@ export declare namespace vpn {
     }
     interface GetConnectionsConnectionIkeConfig {
         /**
-         * The authentication algorithm of phase-one negotiation.
+         * IKE auth Algorithm.
          */
         ikeAuthAlg?: string;
         /**
-         * The encryption algorithm of phase-one negotiation.
+         * IKE encript algorithm.
          */
         ikeEncAlg?: string;
         /**
-         * The SA lifecycle as the result of phase-one negotiation.
+         * IKE lifetime.
          */
         ikeLifetime?: number;
         /**
@@ -47725,11 +47765,11 @@ export declare namespace vpn {
          */
         ikeLocalId?: string;
         /**
-         * The negotiation mode of IKE phase-one.
+         * IKE Mode.
          */
         ikeMode?: string;
         /**
-         * The Diffie-Hellman key exchange algorithm used by phase-one negotiation.
+         * DH Group.
          */
         ikePfs?: string;
         /**
@@ -47737,32 +47777,149 @@ export declare namespace vpn {
          */
         ikeRemoteId?: string;
         /**
-         * The version of the IKE protocol.
+         * IKE Version.
          */
         ikeVersion?: string;
         /**
-         * Used for authentication between the IPsec VPN gateway and the customer gateway.
+         * Preshared secret key.
          */
         psk?: string;
     }
     interface GetConnectionsConnectionIpsecConfig {
         /**
-         * The authentication algorithm of phase-two negotiation.
+         * IPsec Auth algorithm.
          */
         ipsecAuthAlg?: string;
         /**
-         * The encryption algorithm of phase-two negotiation.
+         * IPsec Encript algorithm.
          */
         ipsecEncAlg?: string;
         /**
-         * The SA lifecycle as the result of phase-two negotiation.
+         * IPsec lifetime.
          */
         ipsecLifetime?: number;
         /**
-         * The Diffie-Hellman key exchange algorithm used by phase-two negotiation.
+         * DH Group.
          */
         ipsecPfs?: string;
     }
+    interface GetConnectionsConnectionTunnelOptionsSpecification {
+        /**
+         * Use the VPN customer gateway ID as the search key.
+         */
+        customerGatewayId: string;
+        /**
+         * Wether enable Dpd detection.
+         */
+        enableDpd: boolean;
+        /**
+         * enable nat traversal.
+         */
+        enableNatTraversal: boolean;
+        internetIp: string;
+        /**
+         * The role of Tunnel.
+         */
+        role: string;
+        state: string;
+        /**
+         * The negotiation status of the BGP routing protocol. Valid values: `success`, `false`.
+         */
+        status: string;
+        /**
+         * The bgp config of Tunnel.
+         */
+        tunnelBgpConfig: outputs.vpn.GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfig;
+        tunnelId: string;
+        /**
+         * The configuration of Phase 1 negotiations in Tunnel.
+         */
+        tunnelIkeConfig: outputs.vpn.GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfig;
+        /**
+         * IPsec configuration in Tunnel.
+         */
+        tunnelIpsecConfig: outputs.vpn.GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfig;
+        zoneNo: string;
+    }
+    interface GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfig {
+        bgpStatus: string;
+        /**
+         * Local asn.
+         */
+        localAsn: string;
+        /**
+         * Local bgp IP.
+         */
+        localBgpIp: string;
+        /**
+         * The counterpart autonomous system number.
+         */
+        peerAsn: string;
+        /**
+         * The BGP address on the other side.
+         */
+        peerBgpIp: string;
+        /**
+         * BGP Tunnel CIDR.
+         */
+        tunnelCidr: string;
+    }
+    interface GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfig {
+        /**
+         * IKE auth Algorithm.
+         */
+        ikeAuthAlg: string;
+        /**
+         * IKE encript algorithm.
+         */
+        ikeEncAlg: string;
+        /**
+         * IKE lifetime.
+         */
+        ikeLifetime: number;
+        /**
+         * IKE Mode.
+         */
+        ikeMode: string;
+        /**
+         * DH Group.
+         */
+        ikePfs: string;
+        /**
+         * IKE Version.
+         */
+        ikeVersion: string;
+        /**
+         * The local Id.
+         */
+        localId: string;
+        /**
+         * Preshared secret key.
+         */
+        psk: string;
+        /**
+         * Remote ID.
+         */
+        remoteId: string;
+    }
+    interface GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfig {
+        /**
+         * IPsec Auth algorithm.
+         */
+        ipsecAuthAlg: string;
+        /**
+         * IPsec Encript algorithm.
+         */
+        ipsecEncAlg: string;
+        /**
+         * IPsec lifetime.
+         */
+        ipsecLifetime: number;
+        /**
+         * DH Group.
+         */
+        ipsecPfs: string;
+    }
     interface GetConnectionsConnectionVcoHealthCheck {
         /**
          * The destination ip address.
@@ -47795,11 +47952,11 @@ export declare namespace vpn {
          */
         authKey?: string;
         /**
-         * The ali cloud side autonomous system.
+         * Local asn.
          */
         localAsn?: number;
         /**
-         * The ali cloud side BGP address.
+         * Local bgp IP.
          */
         localBgpIp?: string;
         /**
@@ -47815,7 +47972,7 @@ export declare namespace vpn {
          */
         status?: string;
         /**
-         * The ipsec tunnel segments.
+         * BGP Tunnel CIDR.
          */
         tunnelCidr?: string;
     }
@@ -48080,6 +48237,10 @@ export declare namespace vpn {
          * The description of the VPN
          */
         description: string;
+        /**
+         * - The ID of the backup VSwitch to which the VPN gateway is attached.
+         */
+        disasterRecoveryVswitchId: string;
         /**
          * Indicates whether the IPsec-VPN feature is enabled.
          */
@@ -48112,6 +48273,10 @@ export declare namespace vpn {
          * The network type of the VPN gateway.
          */
         networkType: string;
+        /**
+         * The ID of the resource group.
+         */
+        resourceGroupId: string;
         /**
          * The Specification of the VPN
          */
@@ -48120,14 +48285,32 @@ export declare namespace vpn {
          * Total count of ssl vpn connections.
          */
         sslConnections: number;
+        /**
+         * The IP address of the SSL-VPN connection. This parameter is returned only when the VPN gateway is a public VPN gateway and supports only the single-tunnel mode. In addition, the VPN gateway must have the SSL-VPN feature enabled.
+         */
+        sslVpnInternetIp: string;
         /**
          * Limit search to specific status - valid value is "Init", "Provisioning", "Active", "Updating", "Deleting".
          */
         status: string;
+        /**
+         * The Tag of.
+         */
+        tags: {
+            [key: string]: any;
+        };
         /**
          * Use the VPC ID as the search key.
          */
         vpcId: string;
+        /**
+         * - The VPN gateway type. Value:  Normal (default): Normal type. NationalStandard: National Secret type.
+         */
+        vpnType: string;
+        /**
+         * - The ID of the VSwitch to which the VPN gateway is attached.
+         */
+        vswitchId: string;
     }
     interface IpsecServerIkeConfig {
         /**

package/videosurveillance/systemGroup.d.ts

@@ -28,7 +28,7 @@ import * as pulumi from "@pulumi/pulumi";
  * Video Surveillance System Group can be imported using the id, e.g.
  *
  * ```sh
- *  $ pulumi import alicloud:videosurveillance/systemGroup:SystemGroup example <id>
+ * $ pulumi import alicloud:videosurveillance/systemGroup:SystemGroup example <id>
  * ```
  */
 export declare class SystemGroup extends pulumi.CustomResource {

package/videosurveillance/systemGroup.js

@@ -34,7 +34,7 @@ const utilities = require("../utilities");
  * Video Surveillance System Group can be imported using the id, e.g.
  *
  * ```sh
- *  $ pulumi import alicloud:videosurveillance/systemGroup:SystemGroup example <id>
+ * $ pulumi import alicloud:videosurveillance/systemGroup:SystemGroup example <id>
  * ```
  */
 class SystemGroup extends pulumi.CustomResource {

package/vod/domain.d.ts

@@ -36,7 +36,7 @@ import * as outputs from "../types/output";
  * VOD Domain can be imported using the id, e.g.
  *
  * ```sh
- *  $ pulumi import alicloud:vod/domain:Domain example <domain_name>
+ * $ pulumi import alicloud:vod/domain:Domain example <domain_name>
  * ```
  */
 export declare class Domain extends pulumi.CustomResource {

package/vod/domain.js

@@ -40,7 +40,7 @@ const utilities = require("../utilities");
  * VOD Domain can be imported using the id, e.g.
  *
  * ```sh
- *  $ pulumi import alicloud:vod/domain:Domain example <domain_name>
+ * $ pulumi import alicloud:vod/domain:Domain example <domain_name>
  * ```
  */
 class Domain extends pulumi.CustomResource {

package/vod/editingProject.d.ts

@@ -45,7 +45,7 @@ import * as pulumi from "@pulumi/pulumi";
  * VOD Editing Project can be imported using the id, e.g.
  *
  * ```sh
- *  $ pulumi import alicloud:vod/editingProject:EditingProject example <id>
+ * $ pulumi import alicloud:vod/editingProject:EditingProject example <id>
  * ```
  */
 export declare class EditingProject extends pulumi.CustomResource {

package/vod/editingProject.js

@@ -51,7 +51,7 @@ const utilities = require("../utilities");
  * VOD Editing Project can be imported using the id, e.g.
  *
  * ```sh
- *  $ pulumi import alicloud:vod/editingProject:EditingProject example <id>
+ * $ pulumi import alicloud:vod/editingProject:EditingProject example <id>
  * ```
  */
 class EditingProject extends pulumi.CustomResource {

package/vpc/bgpGroup.d.ts

@@ -50,7 +50,7 @@ import * as pulumi from "@pulumi/pulumi";
  * VPC Bgp Group can be imported using the id, e.g.
  *
  * ```sh
- *  $ pulumi import alicloud:vpc/bgpGroup:BgpGroup example <id>
+ * $ pulumi import alicloud:vpc/bgpGroup:BgpGroup example <id>
  * ```
  */
 export declare class BgpGroup extends pulumi.CustomResource {

package/vpc/bgpGroup.js

@@ -56,7 +56,7 @@ const utilities = require("../utilities");
  * VPC Bgp Group can be imported using the id, e.g.
  *
  * ```sh
- *  $ pulumi import alicloud:vpc/bgpGroup:BgpGroup example <id>
+ * $ pulumi import alicloud:vpc/bgpGroup:BgpGroup example <id>
  * ```
  */
 class BgpGroup extends pulumi.CustomResource {

package/vpc/bgpNetwork.d.ts

@@ -46,7 +46,7 @@ import * as pulumi from "@pulumi/pulumi";
  * VPC Bgp Network can be imported using the id, e.g.
  *
  * ```sh
- *  $ pulumi import alicloud:vpc/bgpNetwork:BgpNetwork example <router_id>:<dst_cidr_block>
+ * $ pulumi import alicloud:vpc/bgpNetwork:BgpNetwork example <router_id>:<dst_cidr_block>
  * ```
  */
 export declare class BgpNetwork extends pulumi.CustomResource {

package/vpc/bgpNetwork.js

@@ -52,7 +52,7 @@ const utilities = require("../utilities");
  * VPC Bgp Network can be imported using the id, e.g.
  *
  * ```sh
- *  $ pulumi import alicloud:vpc/bgpNetwork:BgpNetwork example <router_id>:<dst_cidr_block>
+ * $ pulumi import alicloud:vpc/bgpNetwork:BgpNetwork example <router_id>:<dst_cidr_block>
  * ```
  */
 class BgpNetwork extends pulumi.CustomResource {

package/vpc/bgpPeer.d.ts

@@ -57,7 +57,7 @@ import * as pulumi from "@pulumi/pulumi";
  * VPC Bgp Peer can be imported using the id, e.g.
  *
  * ```sh
- *  $ pulumi import alicloud:vpc/bgpPeer:BgpPeer example <id>
+ * $ pulumi import alicloud:vpc/bgpPeer:BgpPeer example <id>
  * ```
  */
 export declare class BgpPeer extends pulumi.CustomResource {

package/vpc/bgpPeer.js

@@ -63,7 +63,7 @@ const utilities = require("../utilities");
  * VPC Bgp Peer can be imported using the id, e.g.
  *
  * ```sh
- *  $ pulumi import alicloud:vpc/bgpPeer:BgpPeer example <id>
+ * $ pulumi import alicloud:vpc/bgpPeer:BgpPeer example <id>
  * ```
  */
 class BgpPeer extends pulumi.CustomResource {

package/vpc/commonBandwithPackage.d.ts

@@ -5,7 +5,7 @@ import * as pulumi from "@pulumi/pulumi";
  * CBWP Common Bandwidth Package can be imported using the id, e.g.
  *
  * ```sh
- *  $ pulumi import alicloud:vpc/commonBandwithPackage:CommonBandwithPackage example <id>
+ * $ pulumi import alicloud:vpc/commonBandwithPackage:CommonBandwithPackage example <id>
  * ```
  */
 export declare class CommonBandwithPackage extends pulumi.CustomResource {

package/vpc/commonBandwithPackage.js

@@ -11,7 +11,7 @@ const utilities = require("../utilities");
  * CBWP Common Bandwidth Package can be imported using the id, e.g.
  *
  * ```sh
- *  $ pulumi import alicloud:vpc/commonBandwithPackage:CommonBandwithPackage example <id>
+ * $ pulumi import alicloud:vpc/commonBandwithPackage:CommonBandwithPackage example <id>
  * ```
  */
 class CommonBandwithPackage extends pulumi.CustomResource {

package/vpc/commonBandwithPackageAttachment.d.ts

@@ -31,7 +31,7 @@ import * as pulumi from "@pulumi/pulumi";
  * cbwp Common Bandwidth Package Attachment can be imported using the id, e.g.
  *
  * ```sh
- *  $ pulumi import alicloud:vpc/commonBandwithPackageAttachment:CommonBandwithPackageAttachment example <bandwidth_package_id>:<instance_id>
+ * $ pulumi import alicloud:vpc/commonBandwithPackageAttachment:CommonBandwithPackageAttachment example <bandwidth_package_id>:<instance_id>
  * ```
  */
 export declare class CommonBandwithPackageAttachment extends pulumi.CustomResource {

package/vpc/commonBandwithPackageAttachment.js

@@ -37,7 +37,7 @@ const utilities = require("../utilities");
  * cbwp Common Bandwidth Package Attachment can be imported using the id, e.g.
  *
  * ```sh
- *  $ pulumi import alicloud:vpc/commonBandwithPackageAttachment:CommonBandwithPackageAttachment example <bandwidth_package_id>:<instance_id>
+ * $ pulumi import alicloud:vpc/commonBandwithPackageAttachment:CommonBandwithPackageAttachment example <bandwidth_package_id>:<instance_id>
  * ```
  */
 class CommonBandwithPackageAttachment extends pulumi.CustomResource {

package/vpc/dhcpOptionsSet.d.ts

@@ -32,7 +32,7 @@ import * as outputs from "../types/output";
  * VPC Dhcp Options Set can be imported using the id, e.g.
  *
  * ```sh
- *  $ pulumi import alicloud:vpc/dhcpOptionsSet:DhcpOptionsSet example <id>
+ * $ pulumi import alicloud:vpc/dhcpOptionsSet:DhcpOptionsSet example <id>
  * ```
  */
 export declare class DhcpOptionsSet extends pulumi.CustomResource {

package/vpc/dhcpOptionsSet.js

@@ -36,7 +36,7 @@ const utilities = require("../utilities");
  * VPC Dhcp Options Set can be imported using the id, e.g.
  *
  * ```sh
- *  $ pulumi import alicloud:vpc/dhcpOptionsSet:DhcpOptionsSet example <id>
+ * $ pulumi import alicloud:vpc/dhcpOptionsSet:DhcpOptionsSet example <id>
  * ```
  */
 class DhcpOptionsSet extends pulumi.CustomResource {

package/vpc/dhcpOptionsSetAttachment.d.ts

@@ -37,7 +37,7 @@ import * as pulumi from "@pulumi/pulumi";
  * VPC Dhcp Options Set Attachment can be imported using the id, e.g.
  *
  * ```sh
- *  $ pulumi import alicloud:vpc/dhcpOptionsSetAttachment:DhcpOptionsSetAttachment example <id>
+ * $ pulumi import alicloud:vpc/dhcpOptionsSetAttachment:DhcpOptionsSetAttachment example <id>
  * ```
  */
 export declare class DhcpOptionsSetAttachment extends pulumi.CustomResource {

package/vpc/dhcpOptionsSetAttachment.js

@@ -43,7 +43,7 @@ const utilities = require("../utilities");
  * VPC Dhcp Options Set Attachment can be imported using the id, e.g.
  *
  * ```sh
- *  $ pulumi import alicloud:vpc/dhcpOptionsSetAttachment:DhcpOptionsSetAttachment example <id>
+ * $ pulumi import alicloud:vpc/dhcpOptionsSetAttachment:DhcpOptionsSetAttachment example <id>
  * ```
  */
 class DhcpOptionsSetAttachment extends pulumi.CustomResource {

package/vpc/flowLog.d.ts

@@ -11,7 +11,7 @@ import * as pulumi from "@pulumi/pulumi";
  * Vpc Flow Log can be imported using the id, e.g.
  *
  * ```sh
- *  $ pulumi import alicloud:vpc/flowLog:FlowLog example <id>
+ * $ pulumi import alicloud:vpc/flowLog:FlowLog example <id>
  * ```
  */
 export declare class FlowLog extends pulumi.CustomResource {

package/vpc/flowLog.js

@@ -17,7 +17,7 @@ const utilities = require("../utilities");
  * Vpc Flow Log can be imported using the id, e.g.
  *
  * ```sh
- *  $ pulumi import alicloud:vpc/flowLog:FlowLog example <id>
+ * $ pulumi import alicloud:vpc/flowLog:FlowLog example <id>
  * ```
  */
 class FlowLog extends pulumi.CustomResource {

package/vpc/forwardEntry.d.ts

@@ -52,7 +52,7 @@ import * as pulumi from "@pulumi/pulumi";
  * Forward Entry can be imported using the id, e.g.
  *
  * ```sh
- *  $ pulumi import alicloud:vpc/forwardEntry:ForwardEntry foo ftb-1aece3:fwd-232ce2
+ * $ pulumi import alicloud:vpc/forwardEntry:ForwardEntry foo ftb-1aece3:fwd-232ce2
  * ```
  */
 export declare class ForwardEntry extends pulumi.CustomResource {

package/vpc/forwardEntry.js

@@ -58,7 +58,7 @@ const utilities = require("../utilities");
  * Forward Entry can be imported using the id, e.g.
  *
  * ```sh
- *  $ pulumi import alicloud:vpc/forwardEntry:ForwardEntry foo ftb-1aece3:fwd-232ce2
+ * $ pulumi import alicloud:vpc/forwardEntry:ForwardEntry foo ftb-1aece3:fwd-232ce2
  * ```
  */
 class ForwardEntry extends pulumi.CustomResource {

package/vpc/gatewayEndpoint.d.ts

@@ -46,7 +46,7 @@ import * as pulumi from "@pulumi/pulumi";
  * VPC Gateway Endpoint can be imported using the id, e.g.
  *
  * ```sh
- *  $ pulumi import alicloud:vpc/gatewayEndpoint:GatewayEndpoint example <id>
+ * $ pulumi import alicloud:vpc/gatewayEndpoint:GatewayEndpoint example <id>
  * ```
  */
 export declare class GatewayEndpoint extends pulumi.CustomResource {

package/vpc/gatewayEndpoint.js

@@ -52,7 +52,7 @@ const utilities = require("../utilities");
  * VPC Gateway Endpoint can be imported using the id, e.g.
  *
  * ```sh
- *  $ pulumi import alicloud:vpc/gatewayEndpoint:GatewayEndpoint example <id>
+ * $ pulumi import alicloud:vpc/gatewayEndpoint:GatewayEndpoint example <id>
  * ```
  */
 class GatewayEndpoint extends pulumi.CustomResource {

package/vpc/gatewayEndpointRouteTableAttachment.d.ts

@@ -48,7 +48,7 @@ import * as pulumi from "@pulumi/pulumi";
  * VPC Gateway Endpoint Route Table Attachment can be imported using the id, e.g.
  *
  * ```sh
- *  $ pulumi import alicloud:vpc/gatewayEndpointRouteTableAttachment:GatewayEndpointRouteTableAttachment example <gateway_endpoint_id>:<route_table_id>
+ * $ pulumi import alicloud:vpc/gatewayEndpointRouteTableAttachment:GatewayEndpointRouteTableAttachment example <gateway_endpoint_id>:<route_table_id>
  * ```
  */
 export declare class GatewayEndpointRouteTableAttachment extends pulumi.CustomResource {