@pulumi/alicloud 3.44.0 → 3.44.1

package/types/input.d.ts

@@ -303,40 +303,62 @@ export declare namespace alb {
     }
     interface LoadBalancerAccessLogConfig {
         /**
-         * The log service that access logs are shipped to.
+         * This Log Storage Project.
          */
-        logProject?: pulumi.Input<string>;
+        logProject: pulumi.Input<string>;
         /**
-         * The log service that access logs are shipped to.
+         * This Log Storage Method Is Increased.
          */
-        logStore?: pulumi.Input<string>;
+        logStore: pulumi.Input<string>;
     }
     interface LoadBalancerLoadBalancerBillingConfig {
         /**
-         * The billing method of the ALB instance. Valid value: `PayAsYouGo`.
+         * Pay Type.
          */
         payType: pulumi.Input<string>;
     }
     interface LoadBalancerModificationProtectionConfig {
         /**
-         * The reason for modification protection. This parameter must be 2 to 128 characters in length, and can contain letters, digits, periods, underscores, and hyphens. The reason must start with a letter. **Note:** This parameter takes effect only when `status` is set to `ConsoleProtection`.
+         * Managed Instance.
          */
         reason?: pulumi.Input<string>;
         /**
-         * Specifies whether to enable the configuration read-only mode for the ALB instance. Valid values: `NonProtection` and `ConsoleProtection`.
+         * Load Balancing Modify the Protection Status.
          */
         status?: pulumi.Input<string>;
     }
     interface LoadBalancerZoneMapping {
+        /**
+         * The SLB Instance Address.
+         */
+        loadBalancerAddresses?: pulumi.Input<pulumi.Input<inputs.alb.LoadBalancerZoneMappingLoadBalancerAddress>[]>;
         /**
          * The ID of the vSwitch that corresponds to the zone. Each zone can use only one vSwitch and subnet.
          */
         vswitchId: pulumi.Input<string>;
         /**
-         * The ID of the zone to which the ALB instance belongs.
+         * The ID of the zone to which the SLB instance belongs.
          */
         zoneId: pulumi.Input<string>;
     }
+    interface LoadBalancerZoneMappingLoadBalancerAddress {
+        /**
+         * IP Address. The Public IP Address, and Private IP Address from the Address Type.
+         */
+        address?: pulumi.Input<string>;
+        /**
+         * The ID of the EIP instance.
+         */
+        allocationId?: pulumi.Input<string>;
+        /**
+         * The type of the EIP instance.
+         */
+        eipType?: pulumi.Input<string>;
+        /**
+         * Ipv6 address.
+         */
+        ipv6Address?: pulumi.Input<string>;
+    }
     interface RuleRuleAction {
         /**
          * Request forwarding based on CORS. See `corsConfig` below.
@@ -418,7 +440,7 @@ export declare namespace alb {
          */
         contentType?: pulumi.Input<string>;
         /**
-         * The HTTP status code of the response. The code must be an `HTTP_2xx`, `HTTP_4xx` or `HTTP_5xx.x` is a digit.
+         * The redirect method. Valid values: `301`, `302`, `303`, `307`, and `308`.
          */
         httpCode?: pulumi.Input<string>;
     }
@@ -469,15 +491,15 @@ export declare namespace alb {
     }
     interface RuleRuleActionRedirectConfig {
         /**
-         * The host name of the destination to which requests are directed. The host name must meet the following rules:  The host name must be 3 to 128 characters in length, and can contain letters, digits, hyphens (-), periods (.), asterisks (*), and question marks (?). The host name must contain at least one period (.), and cannot start or end with a period (.). The rightmost domain label can contain only letters, asterisks (*) and question marks (?) and cannot contain digits or hyphens (-). Other domain labels cannot start or end with a hyphen (-). You can include asterisks (*) and question marks (?) anywhere in a domain label. Default value: ${host}. You cannot use this value with other characters at the same time.
+         * The host name of the destination to which requests are redirected within ALB. Valid values:  The host name must be 3 to 128 characters in length, and can contain letters, digits, hyphens (-), periods (.), asterisks (*), and question marks (?). The host name must contain at least one period (.), and cannot start or end with a period (.). The rightmost domain label can contain only letters, asterisks (*) and question marks (?) and cannot contain digits or hyphens (-). Other domain labels cannot start or end with a hyphen (-). You can include asterisks (*) and question marks (?) anywhere in a domain label. Default value: ${host}. You cannot use this value with other characters at the same time.
          */
         host?: pulumi.Input<string>;
         /**
-         * The HTTP status code of the response. The code must be an `HTTP_2xx`, `HTTP_4xx` or `HTTP_5xx.x` is a digit.
+         * The redirect method. Valid values: `301`, `302`, `303`, `307`, and `308`.
          */
         httpCode?: pulumi.Input<string>;
         /**
-         * The path of the destination to which requests are directed. Valid values: The path must be 1 to 128 characters in length, and start with a forward slash (/). The path can contain letters, digits, asterisks (*), question marks (?) and the following special characters: $ - _ . + / & ~ @ :. It cannot contain the following special characters: " % # ; ! ( ) [ ] ^ , ”. The path is case-sensitive. Default value: ${path}. You can also reference ${host}, ${protocol}, and ${port}. Each variable can appear at most once. You can use the preceding variables at the same time, or use them with a valid string.
+         * The path to which requests are to be redirected within ALB. Valid values: The path must be 1 to 128 characters in length, and start with a forward slash (/). The path can contain letters, digits, asterisks (*), question marks (?)and the following special characters: $ - _ . + / & ~ @ :. It cannot contain the following special characters: " % # ; ! ( ) [ ] ^ , ”. The path is case-sensitive. Default value: ${path}. This value can be used only once. You can use it with a valid string.
          */
         path?: pulumi.Input<string>;
         /**
@@ -489,21 +511,21 @@ export declare namespace alb {
          */
         protocol?: pulumi.Input<string>;
         /**
-         * The query string of the request to be redirected. The query string must be 1 to 128 characters in length, can contain letters and printable characters. It cannot contain the following special characters: # [ ] { } \ | < > &. Default value: ${query}. You can also reference ${host}, ${protocol}, and ${port}. Each variable can appear at most once. You can use the preceding variables at the same time, or use them together with a valid string.
+         * The query string of the request to be redirected within ALB. The query string must be 1 to 128 characters in length, can contain letters and printable characters. It cannot contain the following special characters: # [ ] { } \ | < > &. Default value: ${query}. This value can be used only once. You can use it with a valid string.
          */
         query?: pulumi.Input<string>;
     }
     interface RuleRuleActionRewriteConfig {
         /**
-         * The host name of the destination to which requests are directed. The host name must meet the following rules:  The host name must be 3 to 128 characters in length, and can contain letters, digits, hyphens (-), periods (.), asterisks (*), and question marks (?). The host name must contain at least one period (.), and cannot start or end with a period (.). The rightmost domain label can contain only letters, asterisks (*) and question marks (?) and cannot contain digits or hyphens (-). Other domain labels cannot start or end with a hyphen (-). You can include asterisks (*) and question marks (?) anywhere in a domain label. Default value: ${host}. You cannot use this value with other characters at the same time.
+         * The host name of the destination to which requests are redirected within ALB. Valid values:  The host name must be 3 to 128 characters in length, and can contain letters, digits, hyphens (-), periods (.), asterisks (*), and question marks (?). The host name must contain at least one period (.), and cannot start or end with a period (.). The rightmost domain label can contain only letters, asterisks (*) and question marks (?) and cannot contain digits or hyphens (-). Other domain labels cannot start or end with a hyphen (-). You can include asterisks (*) and question marks (?) anywhere in a domain label. Default value: ${host}. You cannot use this value with other characters at the same time.
          */
         host?: pulumi.Input<string>;
         /**
-         * The path of the destination to which requests are directed. Valid values: The path must be 1 to 128 characters in length, and start with a forward slash (/). The path can contain letters, digits, asterisks (*), question marks (?) and the following special characters: $ - _ . + / & ~ @ :. It cannot contain the following special characters: " % # ; ! ( ) [ ] ^ , ”. The path is case-sensitive. Default value: ${path}. You can also reference ${host}, ${protocol}, and ${port}. Each variable can appear at most once. You can use the preceding variables at the same time, or use them with a valid string.
+         * The path to which requests are to be redirected within ALB. Valid values: The path must be 1 to 128 characters in length, and start with a forward slash (/). The path can contain letters, digits, asterisks (*), question marks (?)and the following special characters: $ - _ . + / & ~ @ :. It cannot contain the following special characters: " % # ; ! ( ) [ ] ^ , ”. The path is case-sensitive. Default value: ${path}. This value can be used only once. You can use it with a valid string.
          */
         path?: pulumi.Input<string>;
         /**
-         * The query string of the request to be redirected. The query string must be 1 to 128 characters in length, can contain letters and printable characters. It cannot contain the following special characters: # [ ] { } \ | < > &. Default value: ${query}. You can also reference ${host}, ${protocol}, and ${port}. Each variable can appear at most once. You can use the preceding variables at the same time, or use them together with a valid string.
+         * The query string of the request to be redirected within ALB. The query string must be 1 to 128 characters in length, can contain letters and printable characters. It cannot contain the following special characters: # [ ] { } \ | < > &. Default value: ${query}. This value can be used only once. You can use it with a valid string.
          */
         query?: pulumi.Input<string>;
     }
@@ -571,7 +593,7 @@ export declare namespace alb {
     }
     interface RuleRuleConditionCookieConfig {
         /**
-         * The values of the cookie. See `values` below.
+         * Add one or more IP addresses or IP address segments. You can add up to 5 forwarding rules in a SourceIp.
          */
         values?: pulumi.Input<pulumi.Input<inputs.alb.RuleRuleConditionCookieConfigValue>[]>;
     }
@@ -592,31 +614,31 @@ export declare namespace alb {
          */
         key?: pulumi.Input<string>;
         /**
-         * The values of the cookie. See `values` below.
+         * Add one or more IP addresses or IP address segments. You can add up to 5 forwarding rules in a SourceIp.
          */
         values?: pulumi.Input<pulumi.Input<string>[]>;
     }
     interface RuleRuleConditionHostConfig {
         /**
-         * The values of the cookie. See `values` below.
+         * Add one or more IP addresses or IP address segments. You can add up to 5 forwarding rules in a SourceIp.
          */
         values?: pulumi.Input<pulumi.Input<string>[]>;
     }
     interface RuleRuleConditionMethodConfig {
         /**
-         * The values of the cookie. See `values` below.
+         * Add one or more IP addresses or IP address segments. You can add up to 5 forwarding rules in a SourceIp.
          */
         values?: pulumi.Input<pulumi.Input<string>[]>;
     }
     interface RuleRuleConditionPathConfig {
         /**
-         * The values of the cookie. See `values` below.
+         * Add one or more IP addresses or IP address segments. You can add up to 5 forwarding rules in a SourceIp.
          */
         values?: pulumi.Input<pulumi.Input<string>[]>;
     }
     interface RuleRuleConditionQueryStringConfig {
         /**
-         * The values of the cookie. See `values` below.
+         * Add one or more IP addresses or IP address segments. You can add up to 5 forwarding rules in a SourceIp.
          */
         values?: pulumi.Input<pulumi.Input<inputs.alb.RuleRuleConditionQueryStringConfigValue>[]>;
     }
@@ -633,7 +655,7 @@ export declare namespace alb {
     }
     interface RuleRuleConditionSourceIpConfig {
         /**
-         * The values of the cookie. See `values` below.
+         * Add one or more IP addresses or IP address segments. You can add up to 5 forwarding rules in a SourceIp.
          */
         values?: pulumi.Input<pulumi.Input<string>[]>;
     }
@@ -958,7 +980,7 @@ export declare namespace arms {
     }
     interface DispatchRuleLabelMatchExpressionGridLabelMatchExpressionGroupLabelMatchExpression {
         /**
-         * The key of the tag of the dispatch rule. Valud values:
+         * The key of the tag of the dispatch rule. Valid values:
          * * _aliyun_arms_userid: user ID
          * * _aliyun_arms_involvedObject_kind: type of the associated object
          * * _aliyun_arms_involvedObject_id: ID of the associated object
@@ -1749,6 +1771,20 @@ export declare namespace cms {
          */
         tagValueMatchFunction: pulumi.Input<string>;
     }
+    interface EventRuleContactParameter {
+        /**
+         * The name of the alert contact group.
+         */
+        contactGroupName?: pulumi.Input<string>;
+        /**
+         * The ID of the recipient that receives alert notifications.
+         */
+        contactParametersId?: pulumi.Input<string>;
+        /**
+         * The alert level and the corresponding notification methods.
+         */
+        level?: pulumi.Input<string>;
+    }
     interface EventRuleEventPattern {
         /**
          * The type of the event-triggered alert rule. Valid values:
@@ -1771,6 +1807,120 @@ export declare namespace cms {
          */
         sqlFilter?: pulumi.Input<string>;
     }
+    interface EventRuleFcParameter {
+        /**
+         * (Available since v1.211.1) The ARN of the API operation.
+         */
+        arn?: pulumi.Input<string>;
+        /**
+         * The ID of the recipient that receives alert notifications.
+         */
+        fcParametersId?: pulumi.Input<string>;
+        /**
+         * The name of the function.
+         */
+        functionName?: pulumi.Input<string>;
+        /**
+         * The region where Function Compute is deployed.
+         */
+        region?: pulumi.Input<string>;
+        /**
+         * The name of the Function Compute service.
+         */
+        serviceName?: pulumi.Input<string>;
+    }
+    interface EventRuleMnsParameter {
+        /**
+         * (Available since v1.211.1) The ARN of the API operation.
+         */
+        arn?: pulumi.Input<string>;
+        /**
+         * The ID of the recipient that receives alert notifications.
+         */
+        mnsParametersId?: pulumi.Input<string>;
+        /**
+         * The name of the MNS queue.
+         */
+        queue?: pulumi.Input<string>;
+        /**
+         * The region where Message Service (MNS) is deployed.
+         */
+        region?: pulumi.Input<string>;
+        /**
+         * The MNS topic.
+         */
+        topic?: pulumi.Input<string>;
+    }
+    interface EventRuleOpenApiParameter {
+        /**
+         * The API name.
+         */
+        action?: pulumi.Input<string>;
+        /**
+         * (Available since v1.211.1) The ARN of the API operation.
+         */
+        arn?: pulumi.Input<string>;
+        /**
+         * The ID of the recipient that receives alert notifications sent by an API callback.
+         */
+        openApiParametersId?: pulumi.Input<string>;
+        /**
+         * The ID of the cloud service to which the API operation belongs.
+         */
+        product?: pulumi.Input<string>;
+        /**
+         * The region where the resource resides.
+         */
+        region?: pulumi.Input<string>;
+        /**
+         * The name of the role.
+         */
+        role?: pulumi.Input<string>;
+        /**
+         * The version of the API.
+         */
+        version?: pulumi.Input<string>;
+    }
+    interface EventRuleSlsParameter {
+        /**
+         * (Available since v1.211.1) The ARN of the API operation.
+         */
+        arn?: pulumi.Input<string>;
+        /**
+         * The name of the Simple Log Service Logstore.
+         */
+        logStore?: pulumi.Input<string>;
+        /**
+         * The name of the Simple Log Service project.
+         */
+        project?: pulumi.Input<string>;
+        /**
+         * The region where Simple Log Service is deployed.
+         */
+        region?: pulumi.Input<string>;
+        /**
+         * The ID of the recipient that receives alert notifications.
+         */
+        slsParametersId?: pulumi.Input<string>;
+    }
+    interface EventRuleWebhookParameter {
+        /**
+         * The HTTP request method.
+         */
+        method?: pulumi.Input<string>;
+        /**
+         * The name of the protocol.
+         */
+        protocol?: pulumi.Input<string>;
+        /**
+         * The callback URL.
+         */
+        url?: pulumi.Input<string>;
+        /**
+         * The ID of the recipient that receives alert notifications.
+         */
+        webhookParametersId?: pulumi.Input<string>;
+    }
     interface GroupMetricRuleEscalations {
         /**
          * The critical level. See `critical` below.
@@ -1787,55 +1937,55 @@ export declare namespace cms {
     }
     interface GroupMetricRuleEscalationsCritical {
         /**
-         * The comparison operator of the threshold for critical-level alerts.
+         * The comparison operator of the threshold for warn-level alerts.
          */
         comparisonOperator?: pulumi.Input<string>;
         /**
-         * The statistical aggregation method for critical-level alerts.
+         * The statistical aggregation method for warn-level alerts.
          */
         statistics?: pulumi.Input<string>;
         /**
-         * The threshold for critical-level alerts.
+         * The threshold for warn-level alerts.
          */
         threshold?: pulumi.Input<string>;
         /**
-         * The consecutive number of times for which the metric value is measured before a critical-level alert is triggered.
+         * The consecutive number of times for which the metric value is measured before a warn-level alert is triggered.
          */
         times?: pulumi.Input<number>;
     }
     interface GroupMetricRuleEscalationsInfo {
         /**
-         * The comparison operator of the threshold for critical-level alerts.
+         * The comparison operator of the threshold for warn-level alerts.
          */
         comparisonOperator?: pulumi.Input<string>;
         /**
-         * The statistical aggregation method for critical-level alerts.
+         * The statistical aggregation method for warn-level alerts.
          */
         statistics?: pulumi.Input<string>;
         /**
-         * The threshold for critical-level alerts.
+         * The threshold for warn-level alerts.
          */
         threshold?: pulumi.Input<string>;
         /**
-         * The consecutive number of times for which the metric value is measured before a critical-level alert is triggered.
+         * The consecutive number of times for which the metric value is measured before a warn-level alert is triggered.
          */
         times?: pulumi.Input<number>;
     }
     interface GroupMetricRuleEscalationsWarn {
         /**
-         * The comparison operator of the threshold for critical-level alerts.
+         * The comparison operator of the threshold for warn-level alerts.
          */
         comparisonOperator?: pulumi.Input<string>;
         /**
-         * The statistical aggregation method for critical-level alerts.
+         * The statistical aggregation method for warn-level alerts.
          */
         statistics?: pulumi.Input<string>;
         /**
-         * The threshold for critical-level alerts.
+         * The threshold for warn-level alerts.
          */
         threshold?: pulumi.Input<string>;
         /**
-         * The consecutive number of times for which the metric value is measured before a critical-level alert is triggered.
+         * The consecutive number of times for which the metric value is measured before a warn-level alert is triggered.
          */
         times?: pulumi.Input<number>;
     }
@@ -1889,11 +2039,11 @@ export declare namespace cms {
     }
     interface HybridMonitorSlsTaskSlsProcessConfigExpress {
         /**
-         * The alias of the aggregation result.
+         * The alias of the extended field that specifies the result of basic operations that are performed on aggregation results.
          */
         alias?: pulumi.Input<string>;
         /**
-         * The extended fields that specify the results of basic operations that are performed on aggregation results. See `express` below.
+         * The extended field that specifies the result of basic operations that are performed on aggregation results.
          */
         express?: pulumi.Input<string>;
     }
@@ -1913,27 +2063,27 @@ export declare namespace cms {
          */
         operator?: pulumi.Input<string>;
         /**
-         * The name of the key that is used to aggregate logs imported from Log Service.
+         * The name of the key that is used to filter logs imported from Log Service.
          */
         slsKeyName?: pulumi.Input<string>;
         /**
-         * The value of the key that is used to filter logs imported from Log Service.
+         * The tag value of the metric.
          */
         value?: pulumi.Input<string>;
     }
     interface HybridMonitorSlsTaskSlsProcessConfigGroupBy {
         /**
-         * The alias of the aggregation result.
+         * The alias of the extended field that specifies the result of basic operations that are performed on aggregation results.
          */
         alias?: pulumi.Input<string>;
         /**
-         * The name of the key that is used to aggregate logs imported from Log Service.
+         * The name of the key that is used to filter logs imported from Log Service.
          */
         slsKeyName?: pulumi.Input<string>;
     }
     interface HybridMonitorSlsTaskSlsProcessConfigStatistic {
         /**
-         * The alias of the aggregation result.
+         * The alias of the extended field that specifies the result of basic operations that are performed on aggregation results.
          */
         alias?: pulumi.Input<string>;
         /**
@@ -1951,7 +2101,7 @@ export declare namespace cms {
          */
         parameterTwo?: pulumi.Input<string>;
         /**
-         * The name of the key that is used to aggregate logs imported from Log Service.
+         * The name of the key that is used to filter logs imported from Log Service.
          */
         slsKeyName?: pulumi.Input<string>;
     }
@@ -2011,55 +2161,55 @@ export declare namespace cms {
     }
     interface MetricRuleTemplateAlertTemplateEscalationsCritical {
         /**
-         * The comparison operator of the threshold for warn-level alerts. Valid values: `GreaterThanOrEqualToThreshold`, `GreaterThanThreshold`, `LessThanOrEqualToThreshold`, `LessThanThreshold`, `NotEqualToThreshold`, `GreaterThanYesterday`, `LessThanYesterday`, `GreaterThanLastWeek`, `LessThanLastWeek`, `GreaterThanLastPeriod`, `LessThanLastPeriod`.
+         * The comparison operator of the threshold for critical-level alerts. Valid values: `GreaterThanOrEqualToThreshold`, `GreaterThanThreshold`, `LessThanOrEqualToThreshold`, `LessThanThreshold`, `NotEqualToThreshold`, `GreaterThanYesterday`, `LessThanYesterday`, `GreaterThanLastWeek`, `LessThanLastWeek`, `GreaterThanLastPeriod`, `LessThanLastPeriod`.
          */
         comparisonOperator?: pulumi.Input<string>;
         /**
-         * The statistical aggregation method for warn-level alerts.
+         * The statistical aggregation method for critical-level alerts.
          */
         statistics?: pulumi.Input<string>;
         /**
-         * The threshold for warn-level alerts.
+         * The threshold for critical-level alerts.
          */
         threshold?: pulumi.Input<string>;
         /**
-         * The consecutive number of times for which the metric value is measured before a warn-level alert is triggered.
+         * The consecutive number of times for which the metric value is measured before a critical-level alert is triggered.
          */
         times?: pulumi.Input<string>;
     }
     interface MetricRuleTemplateAlertTemplateEscalationsInfo {
         /**
-         * The comparison operator of the threshold for warn-level alerts. Valid values: `GreaterThanOrEqualToThreshold`, `GreaterThanThreshold`, `LessThanOrEqualToThreshold`, `LessThanThreshold`, `NotEqualToThreshold`, `GreaterThanYesterday`, `LessThanYesterday`, `GreaterThanLastWeek`, `LessThanLastWeek`, `GreaterThanLastPeriod`, `LessThanLastPeriod`.
+         * The comparison operator of the threshold for critical-level alerts. Valid values: `GreaterThanOrEqualToThreshold`, `GreaterThanThreshold`, `LessThanOrEqualToThreshold`, `LessThanThreshold`, `NotEqualToThreshold`, `GreaterThanYesterday`, `LessThanYesterday`, `GreaterThanLastWeek`, `LessThanLastWeek`, `GreaterThanLastPeriod`, `LessThanLastPeriod`.
          */
         comparisonOperator?: pulumi.Input<string>;
         /**
-         * The statistical aggregation method for warn-level alerts.
+         * The statistical aggregation method for critical-level alerts.
          */
         statistics?: pulumi.Input<string>;
         /**
-         * The threshold for warn-level alerts.
+         * The threshold for critical-level alerts.
          */
         threshold?: pulumi.Input<string>;
         /**
-         * The consecutive number of times for which the metric value is measured before a warn-level alert is triggered.
+         * The consecutive number of times for which the metric value is measured before a critical-level alert is triggered.
          */
         times?: pulumi.Input<string>;
     }
     interface MetricRuleTemplateAlertTemplateEscalationsWarn {
         /**
-         * The comparison operator of the threshold for warn-level alerts. Valid values: `GreaterThanOrEqualToThreshold`, `GreaterThanThreshold`, `LessThanOrEqualToThreshold`, `LessThanThreshold`, `NotEqualToThreshold`, `GreaterThanYesterday`, `LessThanYesterday`, `GreaterThanLastWeek`, `LessThanLastWeek`, `GreaterThanLastPeriod`, `LessThanLastPeriod`.
+         * The comparison operator of the threshold for critical-level alerts. Valid values: `GreaterThanOrEqualToThreshold`, `GreaterThanThreshold`, `LessThanOrEqualToThreshold`, `LessThanThreshold`, `NotEqualToThreshold`, `GreaterThanYesterday`, `LessThanYesterday`, `GreaterThanLastWeek`, `LessThanLastWeek`, `GreaterThanLastPeriod`, `LessThanLastPeriod`.
          */
         comparisonOperator?: pulumi.Input<string>;
         /**
-         * The statistical aggregation method for warn-level alerts.
+         * The statistical aggregation method for critical-level alerts.
          */
         statistics?: pulumi.Input<string>;
         /**
-         * The threshold for warn-level alerts.
+         * The threshold for critical-level alerts.
          */
         threshold?: pulumi.Input<string>;
         /**
-         * The consecutive number of times for which the metric value is measured before a warn-level alert is triggered.
+         * The consecutive number of times for which the metric value is measured before a critical-level alert is triggered.
          */
         times?: pulumi.Input<string>;
     }
@@ -2384,50 +2534,6 @@ export declare namespace cs {
          */
         privateIp?: pulumi.Input<string>;
     }
-    interface GetKubernetesAddonsAddon {
-        /**
-         * The current custom configuration of the addon. **Note:** Available in v1.166.0+
-         */
-        currentConfig?: string;
-        /**
-         * The current version of addon, if this field is an empty string, it means that the addon is not installed.
-         */
-        currentVersion?: string;
-        /**
-         * The name of addon.
-         */
-        name?: string;
-        /**
-         * The next version of this addon can be upgraded to.
-         */
-        nextVersion?: string;
-        /**
-         * Whether the addon is a system addon.
-         */
-        required?: boolean;
-    }
-    interface GetKubernetesAddonsAddonArgs {
-        /**
-         * The current custom configuration of the addon. **Note:** Available in v1.166.0+
-         */
-        currentConfig?: pulumi.Input<string>;
-        /**
-         * The current version of addon, if this field is an empty string, it means that the addon is not installed.
-         */
-        currentVersion?: pulumi.Input<string>;
-        /**
-         * The name of addon.
-         */
-        name?: pulumi.Input<string>;
-        /**
-         * The next version of this addon can be upgraded to.
-         */
-        nextVersion?: pulumi.Input<string>;
-        /**
-         * Whether the addon is a system addon.
-         */
-        required?: pulumi.Input<boolean>;
-    }
     interface GetKubernetesPermissionPermission {
         /**
          * ndicates whether the permissions are granted to the cluster owner. Valid values `0`, `1`.
@@ -2760,7 +2866,7 @@ export declare namespace cs {
     }
     interface ManagedKubernetesRuntime {
         /**
-         * The kubernetes cluster's name. It is unique in one Alicloud account.
+         * This parameter specifies the name of the component.
          */
         name?: pulumi.Input<string>;
         /**
@@ -2846,7 +2952,7 @@ export declare namespace cs {
          */
         id?: pulumi.Input<string>;
         /**
-         * The kubernetes cluster's name. It is unique in one Alicloud account.
+         * This parameter specifies the name of the component.
          */
         name?: pulumi.Input<string>;
         /**
@@ -2932,7 +3038,7 @@ export declare namespace cs {
          */
         kubeApiQps?: pulumi.Input<string>;
         /**
-         * Same as kubeReserved. The set of ResourceName=ResourceQuantity (e.g. cpu=200m,memory=150G) pairs that describe resources reserved for kubernetes system components. Currently, cpu, memory and local storage for root file system are supported. See [compute resources](http://kubernetes.io/docs/user-guide/compute-resources) for more details.
+         * Same as kubeReserved. The set of ResourceName=ResourceQuantity (e.g. cpu=200m,memory=150G) pairs that describe resources reserved for kubernetes system components. Currently, cpu, memory and local storage for root file system are supported. See [compute resources](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/) for more details.
          */
         kubeReserved?: pulumi.Input<{
             [key: string]: any;
@@ -2950,7 +3056,7 @@ export declare namespace cs {
          */
         serializeImagePulls?: pulumi.Input<string>;
         /**
-         * Same as systemReserved. The set of ResourceName=ResourceQuantity (e.g. cpu=200m,memory=150G) pairs that describe resources reserved for non-kubernetes components. Currently, only cpu and memory are supported. See [compute resources](http://kubernetes.io/docs/user-guide/compute-resources) for more details.
+         * Same as systemReserved. The set of ResourceName=ResourceQuantity (e.g. cpu=200m,memory=150G) pairs that describe resources reserved for non-kubernetes components. Currently, only cpu and memory are supported. See [compute resources](https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/) for more details.
          */
         systemReserved?: pulumi.Input<{
             [key: string]: any;
@@ -4130,7 +4236,7 @@ export declare namespace eci {
          */
         key?: pulumi.Input<string>;
         /**
-         * The variable value of the security context that the container group runs.
+         * The value of the variable. The value can be 0 to 256 characters in length.
          */
         value?: pulumi.Input<string>;
     }
@@ -4170,17 +4276,17 @@ export declare namespace eci {
     }
     interface ContainerGroupContainerLivenessProbeExec {
         /**
-         * The commands run by the init container.
+         * Commands to be executed inside the container when performing health checks using the command line method.
          */
         commands?: pulumi.Input<pulumi.Input<string>[]>;
     }
     interface ContainerGroupContainerLivenessProbeHttpGet {
         /**
-         * The relative file path.
+         * The path of HTTP Get request detection when setting the postStart callback function using the HTTP request method.
          */
         path?: pulumi.Input<string>;
         /**
-         * The port number. Valid values: `1` to `65535`.
+         * When using the HTTP request method for health check, the port number for HTTP Get request detection.
          */
         port?: pulumi.Input<number>;
         /**
@@ -4190,13 +4296,13 @@ export declare namespace eci {
     }
     interface ContainerGroupContainerLivenessProbeTcpSocket {
         /**
-         * The port number. Valid values: `1` to `65535`.
+         * When using the HTTP request method for health check, the port number for HTTP Get request detection.
          */
         port?: pulumi.Input<number>;
     }
     interface ContainerGroupContainerPort {
         /**
-         * The port number. Valid values: `1` to `65535`.
+         * When using the HTTP request method for health check, the port number for HTTP Get request detection.
          */
         port?: pulumi.Input<number>;
         /**
@@ -4240,17 +4346,17 @@ export declare namespace eci {
     }
     interface ContainerGroupContainerReadinessProbeExec {
         /**
-         * The commands run by the init container.
+         * Commands to be executed inside the container when performing health checks using the command line method.
          */
         commands?: pulumi.Input<pulumi.Input<string>[]>;
     }
     interface ContainerGroupContainerReadinessProbeHttpGet {
         /**
-         * The relative file path.
+         * The path of HTTP Get request detection when setting the postStart callback function using the HTTP request method.
          */
         path?: pulumi.Input<string>;
         /**
-         * The port number. Valid values: `1` to `65535`.
+         * When using the HTTP request method for health check, the port number for HTTP Get request detection.
          */
         port?: pulumi.Input<number>;
         /**
@@ -4260,7 +4366,7 @@ export declare namespace eci {
     }
     interface ContainerGroupContainerReadinessProbeTcpSocket {
         /**
-         * The port number. Valid values: `1` to `65535`.
+         * When using the HTTP request method for health check, the port number for HTTP Get request detection.
          */
         port?: pulumi.Input<number>;
     }
@@ -4270,11 +4376,11 @@ export declare namespace eci {
          */
         mountPath?: pulumi.Input<string>;
         /**
-         * The name of the volume.
+         * The name of the mounted volume.
          */
         name?: pulumi.Input<string>;
         /**
-         * Specifies whether the mount path is read-only. Default value: `false`.
+         * Specifies whether the volume is read-only. Default value: `false`.
          */
         readOnly?: pulumi.Input<boolean>;
     }
@@ -4294,11 +4400,11 @@ export declare namespace eci {
     }
     interface ContainerGroupDnsConfigOption {
         /**
-         * The name of the volume.
+         * The name of the mounted volume.
          */
         name?: pulumi.Input<string>;
         /**
-         * The variable value of the security context that the container group runs.
+         * The value of the variable. The value can be 0 to 256 characters in length.
          */
         value?: pulumi.Input<string>;
     }
@@ -4310,11 +4416,11 @@ export declare namespace eci {
     }
     interface ContainerGroupEciSecurityContextSysctl {
         /**
-         * The name of the volume.
+         * The name of the mounted volume.
          */
         name?: pulumi.Input<string>;
         /**
-         * The variable value of the security context that the container group runs.
+         * The value of the variable. The value can be 0 to 256 characters in length.
          */
         value?: pulumi.Input<string>;
     }
@@ -4406,13 +4512,13 @@ export declare namespace eci {
          */
         key?: pulumi.Input<string>;
         /**
-         * The variable value of the security context that the container group runs.
+         * The value of the variable. The value can be 0 to 256 characters in length.
          */
         value?: pulumi.Input<string>;
     }
     interface ContainerGroupInitContainerPort {
         /**
-         * The port number. Valid values: `1` to `65535`.
+         * When using the HTTP request method for health check, the port number for HTTP Get request detection.
          */
         port?: pulumi.Input<number>;
         /**
@@ -4426,11 +4532,11 @@ export declare namespace eci {
          */
         mountPath?: pulumi.Input<string>;
         /**
-         * The name of the volume.
+         * The name of the mounted volume.
          */
         name?: pulumi.Input<string>;
         /**
-         * Specifies whether the mount path is read-only. Default value: `false`.
+         * Specifies whether the volume is read-only. Default value: `false`.
          */
         readOnly?: pulumi.Input<boolean>;
     }
@@ -4487,7 +4593,7 @@ export declare namespace eci {
          */
         content?: pulumi.Input<string>;
         /**
-         * The relative file path.
+         * The path of HTTP Get request detection when setting the postStart callback function using the HTTP request method.
          */
         path?: pulumi.Input<string>;
     }
@@ -4529,10 +4635,25 @@ export declare namespace ecp {
 }
 export declare namespace ecs {
     interface AutoProvisioningGroupLaunchTemplateConfig {
+        /**
+         * The instance type of the Nth extended configurations of the launch template.
+         */
         instanceType?: pulumi.Input<string>;
+        /**
+         * The maximum price of the instance type specified in the Nth extended configurations of the launch template.
+         */
         maxPrice: pulumi.Input<string>;
+        /**
+         * The priority of the instance type specified in the Nth extended configurations of the launch template. A value of 0 indicates the highest priority.
+         */
         priority?: pulumi.Input<string>;
+        /**
+         * The ID of the VSwitch in the Nth extended configurations of the launch template.
+         */
         vswitchId: pulumi.Input<string>;
+        /**
+         * The weight of the instance type specified in the Nth extended configurations of the launch template.
+         */
         weightedCapacity: pulumi.Input<string>;
     }
     interface DedicatedHostNetworkAttribute {
@@ -4621,15 +4742,15 @@ export declare namespace ecs {
     }
     interface EcsLaunchTemplateDataDisk {
         /**
-         * The category of the system disk. System disk type. Valid values: `all`, `cloud`, `ephemeralSsd`, `cloudEssd`, `cloudEfficiency`, `cloudSsd`, `localDisk`.
+         * The category of the disk.
          */
         category?: pulumi.Input<string>;
         /**
-         * Specifies whether to release the system disk when the instance is released. Default to `true`.
+         * Indicates whether the data disk is released with the instance.
          */
         deleteWithInstance?: pulumi.Input<boolean>;
         /**
-         * Description of instance launch template version 1. It can be [2, 256] characters in length. It cannot start with "http://" or "https://". The default value is null.
+         * The description of the data disk.
          */
         description?: pulumi.Input<string>;
         /**
@@ -4637,15 +4758,15 @@ export declare namespace ecs {
          */
         encrypted?: pulumi.Input<boolean>;
         /**
-         * It has been deprecated from version 1.120.0, and use field `launchTemplateName` instead.
+         * The name of the data disk.
          */
         name?: pulumi.Input<string>;
         /**
-         * The performance level of the ESSD used as the system disk. Valid Values: `PL0`, `PL1`, `PL2`, and `PL3`. Default to: `PL0`.
+         * The performance level of the ESSD used as the data disk.
          */
         performanceLevel?: pulumi.Input<string>;
         /**
-         * Size of the system disk, measured in GB. Value range: [20, 500].
+         * The size of the data disk.
          */
         size?: pulumi.Input<number>;
         /**
@@ -4655,11 +4776,11 @@ export declare namespace ecs {
     }
     interface EcsLaunchTemplateNetworkInterfaces {
         /**
-         * Description of instance launch template version 1. It can be [2, 256] characters in length. It cannot start with "http://" or "https://". The default value is null.
+         * The ENI description.
          */
         description?: pulumi.Input<string>;
         /**
-         * It has been deprecated from version 1.120.0, and use field `launchTemplateName` instead.
+         * The ENI name.
          */
         name?: pulumi.Input<string>;
         /**
@@ -4667,11 +4788,11 @@ export declare namespace ecs {
          */
         primaryIp?: pulumi.Input<string>;
         /**
-         * The security group ID.
+         * The security group ID must be one in the same VPC.
          */
         securityGroupId?: pulumi.Input<string>;
         /**
-         * When creating a VPC-Connected instance, you must specify its VSwitch ID.
+         * The VSwitch ID for ENI. The instance must be in the same zone of the same VPC network as the ENI, but they may belong to different VSwitches.
          */
         vswitchId?: pulumi.Input<string>;
     }
@@ -4685,15 +4806,19 @@ export declare namespace ecs {
          */
         deleteWithInstance?: pulumi.Input<boolean>;
         /**
-         * Description of instance launch template version 1. It can be [2, 256] characters in length. It cannot start with "http://" or "https://". The default value is null.
+         * System disk description. It cannot begin with http:// or https://.
          */
         description?: pulumi.Input<string>;
+        /**
+         * Specifies whether the system disk is encrypted.
+         */
+        encrypted?: pulumi.Input<boolean>;
         /**
          * The Iops.
          */
         iops?: pulumi.Input<string>;
         /**
-         * It has been deprecated from version 1.120.0, and use field `launchTemplateName` instead.
+         * System disk name. The name is a string of 2 to 128 characters. It must begin with an English or a Chinese character. It can contain A-Z, a-z, Chinese characters, numbers, periods (.), colons (:), underscores (_), and hyphens (-).
          */
         name?: pulumi.Input<string>;
         /**
@@ -4939,6 +5064,12 @@ export declare namespace ecs {
          * The description of the data disk.
          */
         description?: pulumi.Input<string>;
+        /**
+         * Encrypted the data in this disk.
+         *
+         * Default to false
+         */
+        encrypted?: pulumi.Input<boolean>;
         iops?: pulumi.Input<string>;
         /**
          * The name of the data disk.
@@ -5774,7 +5905,6 @@ export declare namespace ess {
         /**
          * The name of the variable. The name can be 1 to 128 characters in length and can contain letters,
          * digits, and underscores (_). It cannot start with a digit.
-         * digits, and underscores (_). It cannot start with a digit.
          */
         key?: pulumi.Input<string>;
         /**
@@ -5796,11 +5926,10 @@ export declare namespace ess {
         /**
          * The directory of the mounted volume. Data under this directory will be overwritten by the
          * data in the volume.
-         * data in the volume.
          */
         mountPath?: pulumi.Input<string>;
         /**
-         * The name of the volume.
+         * The name of the mounted volume.
          */
         name?: pulumi.Input<string>;
         /**
@@ -5890,7 +6019,6 @@ export declare namespace ess {
         /**
          * The name of the variable. The name can be 1 to 128 characters in length and can contain letters,
          * digits, and underscores (_). It cannot start with a digit.
-         * digits, and underscores (_). It cannot start with a digit.
          */
         key?: pulumi.Input<string>;
         /**
@@ -5912,11 +6040,10 @@ export declare namespace ess {
         /**
          * The directory of the mounted volume. Data under this directory will be overwritten by the
          * data in the volume.
-         * data in the volume.
          */
         mountPath?: pulumi.Input<string>;
         /**
-         * The name of the volume.
+         * The name of the mounted volume.
          */
         name?: pulumi.Input<string>;
         /**
@@ -6201,11 +6328,11 @@ export declare namespace eventbridge {
          */
         isValueSecret?: pulumi.Input<string>;
         /**
-         * The key of the request header.
+         * The key of the request path.
          */
         key?: pulumi.Input<string>;
         /**
-         * The value of the request header.
+         * The key of the request path.
          */
         value?: pulumi.Input<string>;
     }
@@ -6215,11 +6342,11 @@ export declare namespace eventbridge {
          */
         isValueSecret?: pulumi.Input<string>;
         /**
-         * The key of the request header.
+         * The key of the request path.
          */
         key?: pulumi.Input<string>;
         /**
-         * The value of the request header.
+         * The key of the request path.
          */
         value?: pulumi.Input<string>;
     }
@@ -6229,11 +6356,11 @@ export declare namespace eventbridge {
          */
         isValueSecret?: pulumi.Input<string>;
         /**
-         * The key of the request header.
+         * The key of the request path.
          */
         key?: pulumi.Input<string>;
         /**
-         * The value of the request header.
+         * The key of the request path.
          */
         value?: pulumi.Input<string>;
     }
@@ -6696,7 +6823,7 @@ export declare namespace ga {
          */
         ruleActionType: pulumi.Input<string>;
         /**
-         * The value of the forwarding action type. For more information, see [How to use it](https://www.alibabacloud.com/help/en/global-accelerator/latest/api-doc-ga-2019-11-20-api-doc-createforwardingrules).
+         * The value of the forwarding action type. For more information, see [How to use it](https://www.alibabacloud.com/help/en/global-accelerator/latest/api-ga-2019-11-20-createforwardingrules).
          */
         ruleActionValue?: pulumi.Input<string>;
     }
@@ -6728,13 +6855,13 @@ export declare namespace ga {
     }
     interface ForwardingRuleRuleConditionHostConfig {
         /**
-         * The length of the path is 1-128 characters. It must start with a forward slash (/), and can only contain letters, numbers, dollar sign ($), dash (-), and underscores (_) , half width full stop (.), plus sign (+), forward slash (/), and (&), wavy line (~), at (@), half width colon (:), apostrophe ('). It supports asterisk (*) and half width question mark (?) as wildcards.
+         * The domain name is 3-128 characters long, which can contain letters, numbers, dashes (-) and width period (.), and supports the use of asterisk (*) and width question mark (?) as wildcard characters.
          */
         values?: pulumi.Input<pulumi.Input<string>[]>;
     }
     interface ForwardingRuleRuleConditionPathConfig {
         /**
-         * The length of the path is 1-128 characters. It must start with a forward slash (/), and can only contain letters, numbers, dollar sign ($), dash (-), and underscores (_) , half width full stop (.), plus sign (+), forward slash (/), and (&), wavy line (~), at (@), half width colon (:), apostrophe ('). It supports asterisk (*) and half width question mark (?) as wildcards.
+         * The domain name is 3-128 characters long, which can contain letters, numbers, dashes (-) and width period (.), and supports the use of asterisk (*) and width question mark (?) as wildcard characters.
          */
         values?: pulumi.Input<pulumi.Input<string>[]>;
     }
@@ -8046,19 +8173,17 @@ export declare namespace oss {
     }
     interface BucketLifecycleRuleAbortMultipartUpload {
         /**
-         * Specifies the time before which the rules take effect. The date must conform to the ISO8601 format and always be UTC 00:00. For example: 2002-10-11T00:00:00.000Z indicates that objects updated before 2002-10-11T00:00:00.000Z are deleted or converted to another storage class, and objects updated after this time (including this time) are not deleted or converted.
+         * Specifies the time before which the rules take effect. The date must conform to the ISO8601 format and always be UTC 00:00. For example: 2002-10-11T00:00:00.000Z indicates that parts created before 2002-10-11T00:00:00.000Z are deleted, and parts created after this time (including this time) are not deleted.
          */
         createdBeforeDate?: pulumi.Input<string>;
         /**
-         * Specifies the number of days after object creation when the specific rule action takes effect.
-         *
-         * `NOTE`: One and only one of "createdBeforeDate" and "days" can be specified in one abortMultipartUpload configuration.
+         * Specifies the number of days noncurrent object versions transition.
          */
         days?: pulumi.Input<number>;
     }
     interface BucketLifecycleRuleExpiration {
         /**
-         * Specifies the time before which the rules take effect. The date must conform to the ISO8601 format and always be UTC 00:00. For example: 2002-10-11T00:00:00.000Z indicates that objects updated before 2002-10-11T00:00:00.000Z are deleted or converted to another storage class, and objects updated after this time (including this time) are not deleted or converted.
+         * Specifies the time before which the rules take effect. The date must conform to the ISO8601 format and always be UTC 00:00. For example: 2002-10-11T00:00:00.000Z indicates that parts created before 2002-10-11T00:00:00.000Z are deleted, and parts created after this time (including this time) are not deleted.
          */
         createdBeforeDate?: pulumi.Input<string>;
         /**
@@ -8066,9 +8191,7 @@ export declare namespace oss {
          */
         date?: pulumi.Input<string>;
         /**
-         * Specifies the number of days after object creation when the specific rule action takes effect.
-         *
-         * `NOTE`: One and only one of "createdBeforeDate" and "days" can be specified in one abortMultipartUpload configuration.
+         * Specifies the number of days noncurrent object versions transition.
          */
         days?: pulumi.Input<number>;
         /**
@@ -8094,7 +8217,7 @@ export declare namespace oss {
     }
     interface BucketLifecycleRuleFilterNot {
         /**
-         * Object key prefix identifying one or more objects to which the rule applies. Default value is null, the rule applies to all objects in a bucket.
+         * The prefix in the names of the objects to which the lifecycle rule does not apply.
          */
         prefix?: pulumi.Input<string>;
         /**
@@ -8114,17 +8237,13 @@ export declare namespace oss {
     }
     interface BucketLifecycleRuleNoncurrentVersionExpiration {
         /**
-         * Specifies the number of days after object creation when the specific rule action takes effect.
-         *
-         * `NOTE`: One and only one of "createdBeforeDate" and "days" can be specified in one abortMultipartUpload configuration.
+         * Specifies the number of days noncurrent object versions transition.
          */
         days: pulumi.Input<number>;
     }
     interface BucketLifecycleRuleNoncurrentVersionTransition {
         /**
-         * Specifies the number of days after object creation when the specific rule action takes effect.
-         *
-         * `NOTE`: One and only one of "createdBeforeDate" and "days" can be specified in one abortMultipartUpload configuration.
+         * Specifies the number of days noncurrent object versions transition.
          */
         days: pulumi.Input<number>;
         /**
@@ -8133,7 +8252,6 @@ export declare namespace oss {
         isAccessTime?: pulumi.Input<boolean>;
         /**
          * Specifies whether to convert the storage class of non-Standard objects back to Standard after the objects are accessed. It takes effect only when the IsAccessTime parameter is set to true. If set to `true`, converts the storage class of the objects to Standard; if set to `false`, does not convert the storage class of the objects to Standard.
-         * `NOTE`: One and only one of "createdBeforeDate" and "days" can be specified in one transition configuration.
          */
         returnToStdWhenVisit?: pulumi.Input<boolean>;
         /**
@@ -8143,13 +8261,11 @@ export declare namespace oss {
     }
     interface BucketLifecycleRuleTransition {
         /**
-         * Specifies the time before which the rules take effect. The date must conform to the ISO8601 format and always be UTC 00:00. For example: 2002-10-11T00:00:00.000Z indicates that objects updated before 2002-10-11T00:00:00.000Z are deleted or converted to another storage class, and objects updated after this time (including this time) are not deleted or converted.
+         * Specifies the time before which the rules take effect. The date must conform to the ISO8601 format and always be UTC 00:00. For example: 2002-10-11T00:00:00.000Z indicates that parts created before 2002-10-11T00:00:00.000Z are deleted, and parts created after this time (including this time) are not deleted.
          */
         createdBeforeDate?: pulumi.Input<string>;
         /**
-         * Specifies the number of days after object creation when the specific rule action takes effect.
-         *
-         * `NOTE`: One and only one of "createdBeforeDate" and "days" can be specified in one abortMultipartUpload configuration.
+         * Specifies the number of days noncurrent object versions transition.
          */
         days?: pulumi.Input<number>;
         /**
@@ -8158,7 +8274,6 @@ export declare namespace oss {
         isAccessTime?: pulumi.Input<boolean>;
         /**
          * Specifies whether to convert the storage class of non-Standard objects back to Standard after the objects are accessed. It takes effect only when the IsAccessTime parameter is set to true. If set to `true`, converts the storage class of the objects to Standard; if set to `false`, does not convert the storage class of the objects to Standard.
-         * `NOTE`: One and only one of "createdBeforeDate" and "days" can be specified in one transition configuration.
          */
         returnToStdWhenVisit?: pulumi.Input<boolean>;
         /**
@@ -8295,7 +8410,7 @@ export declare namespace ots {
          */
         enableSortAndAgg?: pulumi.Input<boolean>;
         /**
-         * Specifies the name of the field in the search index. The value is used as a column name. A field in a search index can be a primary key column or an attribute column.
+         * The name of the field that is used to sort data. only required if sorterType is FieldSort.
          */
         fieldName: pulumi.Input<string>;
         /**
@@ -8329,7 +8444,7 @@ export declare namespace ots {
     }
     interface SearchIndexSchemaIndexSortSorter {
         /**
-         * Specifies the name of the field in the search index. The value is used as a column name. A field in a search index can be a primary key column or an attribute column.
+         * The name of the field that is used to sort data. only required if sorterType is FieldSort.
          */
         fieldName?: pulumi.Input<string>;
         /**
@@ -8470,8 +8585,6 @@ export declare namespace pvtz {
     interface ZoneAttachmentVpc {
         /**
          * The region of the vpc. If not set, the current region will instead of.
-         *
-         * Recommend to use `vpcs`.
          */
         regionId?: pulumi.Input<string>;
         /**
@@ -9237,7 +9350,7 @@ export declare namespace sae {
          */
         key?: pulumi.Input<string>;
         /**
-         * The path of the container in SAE.
+         * The mount path.
          */
         mountPath?: pulumi.Input<string>;
     }
@@ -9325,7 +9438,7 @@ export declare namespace sae {
          */
         path?: pulumi.Input<string>;
         /**
-         * The port that is used to check the status of TCP connections.
+         * The port.
          */
         port?: pulumi.Input<number>;
         /**
@@ -9335,7 +9448,7 @@ export declare namespace sae {
     }
     interface ApplicationLivenessV2TcpSocket {
         /**
-         * The port that is used to check the status of TCP connections.
+         * The port.
          */
         port?: pulumi.Input<number>;
     }
@@ -9371,11 +9484,11 @@ export declare namespace sae {
          */
         bucketPath?: pulumi.Input<string>;
         /**
-         * The path of the container in SAE.
+         * The mount path.
          */
         mountPath?: pulumi.Input<string>;
         /**
-         * Specifies whether the application can use the container path to read data from or write data to resources in the directory of the OSS bucket. Valid values:
+         * Specifies whether the application can read data from or write data to resources in the directory of the NAS. Valid values: `true` and `false`. If you set `readOnly` to `false`, the application has the read and write permissions.
          */
         readOnly?: pulumi.Input<boolean>;
     }
@@ -9423,7 +9536,7 @@ export declare namespace sae {
     }
     interface ApplicationPvtzDiscoverySvcPortProtocol {
         /**
-         * The port that is used to check the status of TCP connections.
+         * The port.
          */
         port?: pulumi.Input<number>;
         /**
@@ -9477,7 +9590,7 @@ export declare namespace sae {
          */
         path?: pulumi.Input<string>;
         /**
-         * The port that is used to check the status of TCP connections.
+         * The port.
          */
         port?: pulumi.Input<number>;
         /**
@@ -9487,7 +9600,7 @@ export declare namespace sae {
     }
     interface ApplicationReadinessV2TcpSocket {
         /**
-         * The port that is used to check the status of TCP connections.
+         * The port.
          */
         port?: pulumi.Input<number>;
     }
@@ -9601,11 +9714,11 @@ export declare namespace sae {
          */
         atTime?: pulumi.Input<string>;
         /**
-         * Maximum number of instances applied. > **NOTE:** The attribute is valid when the attribute `scalingRuleType` is `mix`.
+         * Maximum number of instances applied.
          */
         maxReplicas?: pulumi.Input<number>;
         /**
-         * Minimum number of instances applied. > **NOTE:** The attribute is valid when the attribute `scalingRuleType` is `mix`.
+         * Minimum number of instances applied.
          */
         minReplicas?: pulumi.Input<number>;
         /**
@@ -9623,7 +9736,7 @@ export declare namespace sae {
          */
         maxThreads?: pulumi.Input<number>;
         /**
-         * The port that is used to check the status of TCP connections.
+         * The port.
          */
         port?: pulumi.Input<number>;
         /**
@@ -9923,125 +10036,137 @@ export declare namespace servicecatalog {
 export declare namespace servicemesh {
     interface ServiceMeshExtraConfiguration {
         /**
-         * Indicates whether the Kubernetes API of clusters on the data plane is used to access Istio resources. A value of `true` indicates that the Kubernetes API is used.
+         * Whether the data plane KubeAPI access capability is enabled. Indicates whether the Kubernetes API of clusters on the data plane is used to access Istio resources. A value of true indicates that the Kubernetes API is used.
          */
         crAggregationEnabled?: pulumi.Input<boolean>;
     }
     interface ServiceMeshLoadBalancer {
         /**
-         * The ID of the SLB instance that is used when the API server is exposed to the Internet.
+         * The IP address of a public network exposed API Server corresponding to the load balancing ID.
          */
         apiServerLoadbalancerId?: pulumi.Input<string>;
         /**
-         * Whether to use the IP address of a public network exposed the API Server.
+         * Indicates whether to use the IP address of a public network exposed API Server.
          */
         apiServerPublicEip?: pulumi.Input<boolean>;
         /**
-         * Whether to use the IP address of a public network exposure the Istio Pilot.
+         * Indicates whether to use the IP address of a public network exposure Istio Pilot.
          */
         pilotPublicEip?: pulumi.Input<boolean>;
         /**
-         * The ID of the Server Load Balancer (SLB) instance that is used when Istio Pilot is exposed to the Internet.
+         * The IP address of a public network exposure Istio Pilot corresponds to the load balancing ID.
          */
         pilotPublicLoadbalancerId?: pulumi.Input<string>;
     }
     interface ServiceMeshMeshConfig {
         /**
-         * The configuration of the access logging. See `accessLog` below.
+         * The access logging configuration. See `mesh_config-access_log` below.
          */
         accessLog?: pulumi.Input<inputs.servicemesh.ServiceMeshMeshConfigAccessLog>;
         /**
-         * The configuration of the audit. See `audit` below.
+         * Audit information. See `mesh_config-audit` below.
          */
         audit?: pulumi.Input<inputs.servicemesh.ServiceMeshMeshConfigAudit>;
         /**
-         * The configuration of the control plane logging. See `controlPlaneLog` below.
+         * Control plane log collection configuration. See `mesh_config-control_plane_log` below.
          */
         controlPlaneLog?: pulumi.Input<inputs.servicemesh.ServiceMeshMeshConfigControlPlaneLog>;
         /**
-         * Whether to enable the use of a custom zipkin.
+         * Whether or not to enable the use of a custom zipkin.
          */
         customizedZipkin?: pulumi.Input<boolean>;
         /**
-         * The enable locality lb.
+         * Whether to enable service can access the service through the nearest node access.
          */
         enableLocalityLb?: pulumi.Input<boolean>;
         /**
-         * The configuration of the Kiali. See `kiali` below.
+         * The IP ADDRESS range.
+         */
+        includeIpRanges?: pulumi.Input<string>;
+        /**
+         * Kiali configuration. See `mesh_config-kiali` below.
          */
         kiali?: pulumi.Input<inputs.servicemesh.ServiceMeshMeshConfigKiali>;
         /**
-         * The open-door policy of agent (OPA) plug-in information. See `opa` below.
+         * The open-door policy of agent (OPA) plug-in information. See `mesh_config-opa` below.
          */
         opa?: pulumi.Input<inputs.servicemesh.ServiceMeshMeshConfigOpa>;
         /**
-         * The policy of the Out to the traffic. Valid values: `ALLOW_ANY` and `REGISTRY_ONLY`.
+         * Out to the traffic policy.
          */
         outboundTrafficPolicy?: pulumi.Input<string>;
         /**
-         * The configuration of the Link trace sampling. See `pilot` below.
+         * Link trace sampling information. See `mesh_config-pilot` below.
          */
         pilot?: pulumi.Input<inputs.servicemesh.ServiceMeshMeshConfigPilot>;
         /**
-         * The configuration of the Proxy. See `proxy` below.
+         * Prometheus configuration.
+         */
+        prometheus?: pulumi.Input<inputs.servicemesh.ServiceMeshMeshConfigPrometheus>;
+        /**
+         * Proxy configuration. See `mesh_config-proxy` below.
          */
         proxy?: pulumi.Input<inputs.servicemesh.ServiceMeshMeshConfigProxy>;
         /**
-         * The configuration of the Sidecar injector. See `sidecarInjector` below.
+         * Sidecar injector configuration. See `mesh_config-sidecar_injector` below.
          */
         sidecarInjector?: pulumi.Input<inputs.servicemesh.ServiceMeshMeshConfigSidecarInjector>;
         /**
-         * Whether to enable acquisition Prometheus metrics it is recommended that you use [Alibaba Cloud Prometheus monitoring](https://arms.console.aliyun.com/).
+         * Whether to enable acquisition Prometheus metrics (it is recommended that you use [Alibaba Cloud Prometheus monitoring](https://arms.console.aliyun.com/).
          */
         telemetry?: pulumi.Input<boolean>;
         /**
-         * Whether to enable link trace you need to have [Alibaba Cloud link tracking service](https://tracing-analysis.console.aliyun.com/).
+         * Whether to enable link trace (you need to have [Alibaba Cloud link tracking service](https://tracing-analysis.console.aliyun.com/).
          */
         tracing?: pulumi.Input<boolean>;
     }
     interface ServiceMeshMeshConfigAccessLog {
         /**
-         * Whether to enable of the access logging. Valid values: `true` and `false`.
+         * Enable CNI.
          */
         enabled?: pulumi.Input<boolean>;
         /**
-         * The SLS Project of the access logging.
+         * The name of the SLS Project to which the control plane logs are collected.
          */
         project?: pulumi.Input<string>;
     }
     interface ServiceMeshMeshConfigAudit {
         /**
-         * Whether to enable of the access logging. Valid values: `true` and `false`.
+         * Enable CNI.
          */
         enabled?: pulumi.Input<boolean>;
         /**
-         * The SLS Project of the access logging.
+         * The name of the SLS Project to which the control plane logs are collected.
          */
         project?: pulumi.Input<string>;
     }
     interface ServiceMeshMeshConfigControlPlaneLog {
         /**
-         * Whether to enable of the access logging. Valid values: `true` and `false`.
+         * Enable CNI.
          */
         enabled?: pulumi.Input<boolean>;
         /**
-         * The SLS Project of the access logging.
+         * The name of the SLS Project to which the control plane logs are collected.
          */
         project?: pulumi.Input<string>;
     }
     interface ServiceMeshMeshConfigKiali {
         /**
-         * Whether to enable of the access logging. Valid values: `true` and `false`.
+         * Enable CNI.
          */
         enabled?: pulumi.Input<boolean>;
+        /**
+         * Grid topology service address.
+         */
+        url?: pulumi.Input<string>;
     }
     interface ServiceMeshMeshConfigOpa {
         /**
-         * Whether to enable of the access logging. Valid values: `true` and `false`.
+         * Enable CNI.
          */
         enabled?: pulumi.Input<boolean>;
         /**
-         * The limit cpu of the Sidecar injector Pods.
+         * Sidecar injector Pods on the throttle.
          */
         limitCpu?: pulumi.Input<string>;
         /**
@@ -10049,15 +10174,15 @@ export declare namespace servicemesh {
          */
         limitMemory?: pulumi.Input<string>;
         /**
-         * The log level of the OPA proxy container .
+         * OPA proxy container log level.
          */
         logLevel?: pulumi.Input<string>;
         /**
-         * The requested cpu the Sidecar injector Pods.
+         * Sidecar injector Pods on the requested resource.
          */
         requestCpu?: pulumi.Input<string>;
         /**
-         * The requested memory the Sidecar injector Pods.
+         * Sidecar injector Pods on the requested resource.
          */
         requestMemory?: pulumi.Input<string>;
     }
@@ -10067,13 +10192,27 @@ export declare namespace servicemesh {
          */
         http10Enabled?: pulumi.Input<boolean>;
         /**
-         * The  percentage of the Link trace sampling.
+         * Link trace sampling percentage.
          */
         traceSampling?: pulumi.Input<number>;
     }
+    interface ServiceMeshMeshConfigPrometheus {
+        /**
+         * Prometheus service addresses (enabled external Prometheus when the system automatically populates).
+         */
+        externalUrl?: pulumi.Input<string>;
+        /**
+         * Whether to enable external Prometheus.
+         */
+        useExternal?: pulumi.Input<boolean>;
+    }
     interface ServiceMeshMeshConfigProxy {
         /**
-         * The limit cpu of the Sidecar injector Pods.
+         * Trust cluster domain.
+         */
+        clusterDomain?: pulumi.Input<string>;
+        /**
+         * Sidecar injector Pods on the throttle.
          */
         limitCpu?: pulumi.Input<string>;
         /**
@@ -10081,11 +10220,11 @@ export declare namespace servicemesh {
          */
         limitMemory?: pulumi.Input<string>;
         /**
-         * The requested cpu the Sidecar injector Pods.
+         * Sidecar injector Pods on the requested resource.
          */
         requestCpu?: pulumi.Input<string>;
         /**
-         * The requested memory the Sidecar injector Pods.
+         * Sidecar injector Pods on the requested resource.
          */
         requestMemory?: pulumi.Input<string>;
     }
@@ -10099,7 +10238,11 @@ export declare namespace servicemesh {
          */
         enableNamespacesByDefault?: pulumi.Input<boolean>;
         /**
-         * The limit cpu of the Sidecar injector Pods.
+         * CNI configuration. See `mesh_config-sidecar_injector-init_cni_configuration` below.
+         */
+        initCniConfiguration?: pulumi.Input<inputs.servicemesh.ServiceMeshMeshConfigSidecarInjectorInitCniConfiguration>;
+        /**
+         * Sidecar injector Pods on the throttle.
          */
         limitCpu?: pulumi.Input<string>;
         /**
@@ -10107,21 +10250,39 @@ export declare namespace servicemesh {
          */
         limitMemory?: pulumi.Input<string>;
         /**
-         * The requested cpu the Sidecar injector Pods.
+         * Sidecar injector Pods on the requested resource.
          */
         requestCpu?: pulumi.Input<string>;
         /**
-         * The requested memory the Sidecar injector Pods.
+         * Sidecar injector Pods on the requested resource.
          */
         requestMemory?: pulumi.Input<string>;
+        /**
+         * Other configurations of automatically injected sidecar (in YAML format).
+         */
+        sidecarInjectorWebhookAsYaml?: pulumi.Input<string>;
+    }
+    interface ServiceMeshMeshConfigSidecarInjectorInitCniConfiguration {
+        /**
+         * Enable CNI.
+         */
+        enabled?: pulumi.Input<boolean>;
+        /**
+         * The excluded namespace.
+         */
+        excludeNamespaces?: pulumi.Input<string>;
     }
     interface ServiceMeshNetwork {
         /**
-         * The ID of the VPC.
+         * Security group ID.
+         */
+        securityGroupId?: pulumi.Input<string>;
+        /**
+         * VPC ID.
          */
         vpcId: pulumi.Input<string>;
         /**
-         * The list of Virtual Switch.
+         * Virtual Switch ID.
          */
         vswitcheList: pulumi.Input<string>;
     }
@@ -10327,7 +10488,7 @@ export declare namespace vpc {
     }
     interface NetworkAclEntriesEgress {
         /**
-         * The description of the ingress entry.
+         * The description of the egress entry.
          */
         description?: pulumi.Input<string>;
         /**
@@ -10335,49 +10496,49 @@ export declare namespace vpc {
          */
         destinationCidrIp?: pulumi.Input<string>;
         /**
-         * The entry type of the ingress entry. It must be `custom` or `system`. Default value is `custom`.
+         * The entry type of the egress entry. It must be `custom` or `system`. Default value is `custom`.
          */
         entryType?: pulumi.Input<string>;
         /**
-         * The name of the ingress entry.
+         * The name of the egress entry.
          */
         name?: pulumi.Input<string>;
         /**
-         * The policy of the ingress entry. It must be `accept` or `drop`.
+         * The policy of the egress entry. It must be `accept` or `drop`.
          */
         policy?: pulumi.Input<string>;
         /**
-         * The port of the ingress entry.
+         * The port of the egress entry.
          */
         port?: pulumi.Input<string>;
         /**
-         * The protocol of the ingress entry.
+         * The protocol of the egress entry.
          */
         protocol?: pulumi.Input<string>;
     }
     interface NetworkAclEntriesIngress {
         /**
-         * The description of the ingress entry.
+         * The description of the egress entry.
          */
         description?: pulumi.Input<string>;
         /**
-         * The entry type of the ingress entry. It must be `custom` or `system`. Default value is `custom`.
+         * The entry type of the egress entry. It must be `custom` or `system`. Default value is `custom`.
          */
         entryType?: pulumi.Input<string>;
         /**
-         * The name of the ingress entry.
+         * The name of the egress entry.
          */
         name?: pulumi.Input<string>;
         /**
-         * The policy of the ingress entry. It must be `accept` or `drop`.
+         * The policy of the egress entry. It must be `accept` or `drop`.
          */
         policy?: pulumi.Input<string>;
         /**
-         * The port of the ingress entry.
+         * The port of the egress entry.
          */
         port?: pulumi.Input<string>;
         /**
-         * The protocol of the ingress entry.
+         * The protocol of the egress entry.
          */
         protocol?: pulumi.Input<string>;
         /**
@@ -10496,8 +10657,6 @@ export declare namespace vpc {
          * Collection strategy for outbound rules. Value:
          * - accept: collects network traffic.
          * - drop: No network traffic is collected.
-         * - accept: collects network traffic.
-         * - drop: No network traffic is collected.
          */
         action: pulumi.Input<string>;
         /**
@@ -10507,7 +10666,6 @@ export declare namespace vpc {
         /**
          * The destination port range of the outbound rule network traffic. The port range is 1 to 65535. Use a forward slash (/) to separate the start port and the end Port. The format is 1/200 and 80/80. Among them, - 1/-1 cannot be set separately, which means that the port is not limited.
          * > **NOTE:**  When egresrules. N.Protocol is set to ALL or ICMP, this parameter does not need to be configured, indicating that the port is not restricted.
-         * > **NOTE:**  When egresrules. N.Protocol is set to ALL or ICMP, this parameter does not need to be configured, indicating that the port is not restricted.
          */
         destinationPortRange?: pulumi.Input<string>;
         /**
@@ -10520,10 +10678,6 @@ export declare namespace vpc {
          * - ICMP: Network Control Message Protocol.
          * - TCP: Transmission Control Protocol.
          * - UDP: User Datagram Protocol.
-         * - ALL: ALL agreements.
-         * - ICMP: Network Control Message Protocol.
-         * - TCP: Transmission Control Protocol.
-         * - UDP: User Datagram Protocol.
          */
         protocol: pulumi.Input<string>;
         /**
@@ -10533,8 +10687,6 @@ export declare namespace vpc {
         /**
          * The source port range of the outbound rule network traffic. The port range is 1 to 65535. Use a forward slash (/) to separate the start port and the end Port. The format is 1/200 and 80/80. Among them, - 1/-1 cannot be set separately, which means that the port is not limited.
          * > **NOTE:**  When egresrules. N.Protocol is set to ALL or ICMP, this parameter does not need to be configured, indicating that the port is not restricted.
-         *
-         * > **NOTE:**  When egresrules. N.Protocol is set to ALL or ICMP, this parameter does not need to be configured, indicating that the port is not restricted.
          */
         sourcePortRange?: pulumi.Input<string>;
         trafficMirrorFilterRuleStatus?: pulumi.Input<string>;
@@ -10544,8 +10696,6 @@ export declare namespace vpc {
          * Collection strategy for outbound rules. Value:
          * - accept: collects network traffic.
          * - drop: No network traffic is collected.
-         * - accept: collects network traffic.
-         * - drop: No network traffic is collected.
          */
         action: pulumi.Input<string>;
         /**
@@ -10555,7 +10705,6 @@ export declare namespace vpc {
         /**
          * The destination port range of the outbound rule network traffic. The port range is 1 to 65535. Use a forward slash (/) to separate the start port and the end Port. The format is 1/200 and 80/80. Among them, - 1/-1 cannot be set separately, which means that the port is not limited.
          * > **NOTE:**  When egresrules. N.Protocol is set to ALL or ICMP, this parameter does not need to be configured, indicating that the port is not restricted.
-         * > **NOTE:**  When egresrules. N.Protocol is set to ALL or ICMP, this parameter does not need to be configured, indicating that the port is not restricted.
          */
         destinationPortRange?: pulumi.Input<string>;
         /**
@@ -10568,10 +10717,6 @@ export declare namespace vpc {
          * - ICMP: Network Control Message Protocol.
          * - TCP: Transmission Control Protocol.
          * - UDP: User Datagram Protocol.
-         * - ALL: ALL agreements.
-         * - ICMP: Network Control Message Protocol.
-         * - TCP: Transmission Control Protocol.
-         * - UDP: User Datagram Protocol.
          */
         protocol: pulumi.Input<string>;
         /**
@@ -10581,8 +10726,6 @@ export declare namespace vpc {
         /**
          * The source port range of the outbound rule network traffic. The port range is 1 to 65535. Use a forward slash (/) to separate the start port and the end Port. The format is 1/200 and 80/80. Among them, - 1/-1 cannot be set separately, which means that the port is not limited.
          * > **NOTE:**  When egresrules. N.Protocol is set to ALL or ICMP, this parameter does not need to be configured, indicating that the port is not restricted.
-         *
-         * > **NOTE:**  When egresrules. N.Protocol is set to ALL or ICMP, this parameter does not need to be configured, indicating that the port is not restricted.
          */
         sourcePortRange?: pulumi.Input<string>;
         trafficMirrorFilterRuleStatus?: pulumi.Input<string>;
@@ -10591,7 +10734,7 @@ export declare namespace vpc {
 export declare namespace vpn {
     interface ConnectionBgpConfig {
         /**
-         * Whether to enable Health Check.
+         * Whether to enable BGP.
          */
         enable?: pulumi.Input<boolean>;
         /**
@@ -10613,7 +10756,7 @@ export declare namespace vpn {
          */
         dip?: pulumi.Input<string>;
         /**
-         * Whether to enable Health Check.
+         * Whether to enable BGP.
          */
         enable?: pulumi.Input<boolean>;
         /**