@psnext/slingcli 3.0.20260820-2 → 3.0.20260827-1

package/node_modules/@types/node/http2.d.ts

@@ -433,7 +433,7 @@ declare module "node:http2" {
          *
          * When the `options.waitForTrailers` option is set, the `'wantTrailers'` event
          * will be emitted immediately after queuing the last chunk of payload data to be
-         * sent. The `http2stream.sendTrailers()` method can then be used to sent trailing
+         * sent. The `http2stream.sendTrailers()` method can then be used to send trailing
          * header fields to the peer.
          *
          * When `options.waitForTrailers` is set, the `Http2Stream` will not automatically
@@ -548,7 +548,7 @@ declare module "node:http2" {
          *
          * When the `options.waitForTrailers` option is set, the `'wantTrailers'` event
          * will be emitted immediately after queuing the last chunk of payload data to be
-         * sent. The `http2stream.sendTrailers()` method can then be used to sent trailing
+         * sent. The `http2stream.sendTrailers()` method can then be used to send trailing
          * header fields to the peer.
          *
          * When `options.waitForTrailers` is set, the `Http2Stream` will not automatically
@@ -840,9 +840,12 @@ declare module "node:http2" {
          * HTTP/2 request to the connected server.
          *
          * When a `ClientHttp2Session` is first created, the socket may not yet be
-         * connected. if `clienthttp2session.request()` is called during this time, the
+         * connected. If `clienthttp2session.request()` is called during this time, the
          * actual request will be deferred until the socket is ready to go.
-         * If the `session` is closed before the actual request be executed, an `ERR_HTTP2_GOAWAY_SESSION` is thrown.
+         *
+         * If the session becomes unavailable before the request can be created, the
+         * returned stream will emit `ERR_HTTP2_GOAWAY_SESSION` or
+         * `ERR_HTTP2_INVALID_SESSION` asynchronously.
          *
          * This method is only available if `http2session.type` is equal to `http2.constants.NGHTTP2_SESSION_CLIENT`.
          *
@@ -1166,6 +1169,11 @@ declare module "node:http2" {
          * @default 128
          */
         maxHeaderListPairs?: number | undefined;
+        /**
+         * Sets the maximum number of uniq origin the sever
+         * can send via ORIGIN frames. **Default:** `128`.
+         */
+        maxOriginSetSize?: number | undefined;
         /**
          * Sets the maximum number of outstanding, unacknowledged pings.
          * @default 10

package/node_modules/@types/node/index.d.ts

@@ -108,6 +108,7 @@
 /// <reference path="util.d.ts" />
 /// <reference path="util/types.d.ts" />
 /// <reference path="v8.d.ts" />
+/// <reference path="vfs.d.ts" />
 /// <reference path="vm.d.ts" />
 /// <reference path="wasi.d.ts" />
 /// <reference path="worker_threads.d.ts" />

package/node_modules/@types/node/inspector.d.ts

@@ -43,7 +43,8 @@ declare module "node:inspector" {
      */
     function open(port?: number, host?: string, wait?: boolean): Disposable;
     /**
-     * Deactivate the inspector. Blocks until there are no active connections.
+     * Deactivates the inspector. If there are active connections, they are forcibly
+     * terminated. Blocks until the inspector server has fully stopped.
      */
     function close(): void;
     /**

package/node_modules/@types/node/net.d.ts

@@ -25,6 +25,7 @@ declare module "node:net" {
         keepAliveInitialDelay?: number | undefined;
         blockList?: BlockList | undefined;
         typeOfService?: number | undefined;
+        handle?: BoundSocket | undefined;
     }
     interface OnReadOpts {
         buffer: Uint8Array | (() => Uint8Array);
@@ -57,6 +58,12 @@ declare module "node:net" {
     }
     type SocketConnectOpts = TcpSocketConnectOpts | IpcSocketConnectOpts;
     type SocketReadyState = "opening" | "open" | "readOnly" | "writeOnly" | "closed";
+    interface SetKeepAliveOptions {
+        enable?: boolean | undefined;
+        initialDelay?: number | undefined;
+        interval?: number | undefined;
+        count?: number | undefined;
+    }
     interface SocketEventMap extends Omit<stream.DuplexEventMap, "close"> {
         "close": [hadError: boolean];
         "connect": [];
@@ -199,25 +206,27 @@ declare module "node:net" {
          */
         setNoDelay(noDelay?: boolean): this;
         /**
-         * Enable/disable keep-alive functionality, and optionally set the initial
-         * delay before the first keepalive probe is sent on an idle socket.
-         *
-         * Set `initialDelay` (in milliseconds) to set the delay between the last
-         * data packet received and the first keepalive probe. Setting `0` for`initialDelay` will leave the value unchanged from the default
-         * (or previous) setting.
-         *
-         * Enabling the keep-alive functionality will set the following socket options:
+         * Configure keep-alive using an options object. See `socket.setKeepAlive()`
+         * for a description of each property.
          *
-         * * `SO_KEEPALIVE=1`
-         * * `TCP_KEEPIDLE=initialDelay`
-         * * `TCP_KEEPCNT=10`
-         * * `TCP_KEEPINTVL=1`
+         * ```js
+         * socket.setKeepAlive({ enable: true, initialDelay: 1000, interval: 1000, count: 10 });
+         * ```
+         * @since v26.4.0
+         * @returns The socket itself.
+         */
+        setKeepAlive(options: SetKeepAliveOptions): this;
+        /**
+         * Configure keep-alive using positional arguments. See
+         * `socket.setKeepAlive()` for a description of each argument.
          * @since v0.1.92
-         * @param [enable=false]
-         * @param [initialDelay=0]
-         * @return The socket itself.
+         * @param enable **Default:** `false`
+         * @param initialDelay **Default:** `0`
+         * @param interval **Default:** `1000`
+         * @param count **Default:** `10`
+         * @returns The socket itself.
          */
-        setKeepAlive(enable?: boolean, initialDelay?: number): this;
+        setKeepAlive(enable?: boolean, initialDelay?: number, interval?: number, count?: number): this;
         /**
          * Returns the current Type of Service (TOS) field for IPv4 packets or Traffic
          * Class for IPv6 packets for this socket.
@@ -442,9 +451,92 @@ declare module "node:net" {
         removeListener(eventName: string | symbol, listener: (...args: any[]) => void): this;
         // #endregion
     }
+    interface BoundSocketOptions {
+        /**
+         * Local address to bind. Must be a numeric IP literal; no DNS
+         * resolution is performed. **Default:** `'0.0.0.0'`, or `'::'` when
+         * `ipv6Only` is `true`.
+         */
+        host?: string | undefined;
+        /**
+         * Local port. `0` requests an OS-assigned ephemeral port.
+         * **Default:** `0`.
+         */
+        port?: number | undefined;
+        /**
+         * Sets `IPV6_V6ONLY`, disabling dual-stack support so the
+         * socket binds IPv6 only. Only meaningful for IPv6 binds. **Default:**
+         * `false`.
+         */
+        ipv6Only?: boolean | undefined;
+        /**
+         * Sets `SO_REUSEPORT`, allowing multiple sockets to bind
+         * the same address and port for kernel-level load balancing. Support is
+         * platform-dependent. **Default:** `false`.
+         */
+        reusePort?: boolean | undefined;
+    }
+    /**
+     * Allows for the synchronous creation of a pre-bound socket, that can be passed
+     * to `listen()` or `new net.Socket()` later on. For `listen()` this enables
+     * synchronous port reservation, while for `new net.Socket()`, it allows control
+     * over the local egress port/IP, via `bind(2)` semantics.
+     *
+     * Adoption transfers ownership of the socket; afterwards `address()` and `close()`
+     * throw `ERR_SOCKET_HANDLE_ADOPTED`. A handle that is never adopted must be
+     * closed to avoid leaking the socket.
+     *
+     * ```js
+     * import net from 'node:net';
+     *
+     * const bound = new net.BoundSocket();
+     * const { port } = bound.address();
+     * console.log(`Reserved port ${port} for server`);
+     *
+     * const server = net.createServer();
+     * server.listen(bound); // Adopt as a server, or pass to new net.Socket() instead.
+     * ```
+     * @since v26.4.0
+     */
+    class BoundSocket {
+        /**
+         * @since v26.4.0
+         */
+        constructor(options?: BoundSocketOptions);
+        /**
+         * Returns the bound local address. When bound with `port: 0`, `port` is the
+         * OS-assigned ephemeral port.
+         * @since v26.4.0
+         * @returns An object with `address`, `family`, and `port` properties,
+         * as `server.address()` returns.
+         */
+        address(): AddressInfo;
+        /**
+         * Returns the file descriptor of the bound socket. Ownership remains with the
+         * `BoundSocket`, so the descriptor must not be closed by the caller. The
+         * descriptor is only available before the handle is adopted; afterwards it belongs
+         * to the adopting `net.Server` or `net.Socket` and `fd()` throws
+         * `ERR_SOCKET_HANDLE_ADOPTED`.
+         * @since v26.4.0
+         * @returns The underlying OS file descriptor, or `-1` on platforms
+         * that do not expose one for sockets (such as Windows).
+         */
+        fd(): number;
+        /**
+         * Releases the bound socket. Only needed when the handle is never adopted.
+         * @since v26.4.0
+         */
+        close(): void;
+        /**
+         * Closes the handle if it has not been adopted or closed; otherwise a no-op.
+         * @since v26.4.0
+         */
+        [Symbol.dispose](): void;
+    }
     interface ListenOptions extends Abortable {
         backlog?: number | undefined;
         exclusive?: boolean | undefined;
+        handle?: BoundSocket | undefined;
         host?: string | undefined;
         /**
          * @default false

package/node_modules/@types/node/package.json

@@ -1,6 +1,6 @@
 {
     "name": "@types/node",
-    "version": "26.2.0",
+    "version": "26.4.0",
     "description": "TypeScript definitions for node",
     "homepage": "https://github.com/DefinitelyTyped/DefinitelyTyped/tree/master/types/node",
     "license": "MIT",
@@ -150,6 +150,6 @@
         "undici-types": "~8.3.0"
     },
     "peerDependencies": {},
-    "typesPublisherContentHash": "e8c7e12bafdd8ff8648e4d416be7af2d4373bffe17a7498d815e251898739e7c",
+    "typesPublisherContentHash": "0793b8d36264e159c56982e4bc1d7024a8a703b13431ee414c7feacfe570e674",
     "typeScriptVersion": "5.6"
 }

package/node_modules/@types/node/process.d.ts

@@ -549,6 +549,58 @@ declare module "node:process" {
                  * @since v20.0.0
                  */
                 has(scope: string, reference?: string): boolean;
+                /**
+                 * Drops the specified permission from the current process. This operation is
+                 * **irreversible** — once a permission is dropped, it cannot be restored through
+                 * any Node.js API.
+                 *
+                 * If no reference is provided, the entire scope is dropped. For example,
+                 * `process.permission.drop('fs.read')` will revoke ALL file system read
+                 * permissions.
+                 *
+                 * When a reference is provided, only the permission for that specific resource
+                 * is dropped. For example, `process.permission.drop('fs.read', '/etc/myapp')`
+                 * will revoke read access to that directory while keeping other read
+                 * permissions intact.
+                 *
+                 * **Important:** You can only drop the exact resource that was explicitly
+                 * granted. The reference passed to `drop()` must match the original grant:
+                 *
+                 * * If a permission was granted using a wildcard (`*`), such as
+                 *   `--allow-fs-read=*`, individual paths cannot be dropped - only the entire
+                 *   scope can be dropped (by calling `drop()` without a reference).
+                 * * If a directory was granted (e.g. `--allow-fs-read=/my/folder`), you cannot
+                 *   drop access to individual files inside it. You must drop the same directory
+                 *   that was granted. Any remaining grants continue to apply.
+                 *
+                 * The available scopes are the same as [`process.permission.has()`][]:
+                 *
+                 *  `fs` - All File System (drops both read and write)
+                 * * `fs.read` - File System read operations
+                 * * `fs.write` - File System write operations
+                 * * `child` - Child process spawning operations
+                 * * `worker` - Worker thread spawning operation
+                 * * `net` - Network operations
+                 * * `inspector` - Inspector operations
+                 * * `wasi` - WASI operations
+                 * * `addon` - Native addon operations
+                 *
+                 * ```js
+                 * const fs = require('node:fs');
+                 *
+                 * // Read configuration during startup
+                 * const config = fs.readFileSync('/etc/myapp/config.json', 'utf8');
+                 *
+                 * // Drop read access to the config directory after initialization
+                 * process.permission.drop('fs.read', '/etc/myapp');
+                 *
+                 * // This will now throw ERR_ACCESS_DENIED
+                 * fs.readFileSync('/etc/myapp/config.json');
+                 * ```
+                 * @since v26.3.0
+                 * @experimental
+                 */
+                drop(scope: string, reference?: string): void;
             }
             interface ProcessReport {
                 /**