@protoboardai/ext-zephyr 0.2.0 → 0.2.2

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
Files changed (2) hide show
  1. package/package.json +13 -2
  2. package/protoboard-extension.json +41 -13
package/package.json CHANGED
@@ -1,7 +1,7 @@
1
1
  {
2
2
  "name": "@protoboardai/ext-zephyr",
3
- "version": "0.2.0",
4
- "description": "Protoboard firmware provider: Zephyr board definitions (devicetree, pinctrl, Kconfig) for nRF52840 modules, from UHD boards",
3
+ "version": "0.2.2",
4
+ "description": "Protoboard extension: Zephyr board definitions for nRF52840 boards.",
5
5
  "license": "Apache-2.0",
6
6
  "author": "Delta Robotics, Inc.",
7
7
  "repository": {
@@ -29,5 +29,16 @@
29
29
  "peerDependencies": {
30
30
  "@protoboardai/core": "^0.2.0",
31
31
  "@deltarobotics/uhd": ">=0.3.0"
32
+ },
33
+ "keywords": [
34
+ "protoboard",
35
+ "hardware",
36
+ "firmware",
37
+ "zephyr",
38
+ "nrf52840"
39
+ ],
40
+ "homepage": "https://protoboard.ai",
41
+ "bugs": {
42
+ "url": "https://github.com/Delta-Robotics-Inc/protoboard-stack/issues"
32
43
  }
33
44
  }
package/protoboard-extension.json CHANGED
@@ -1,7 +1,7 @@
1
1
  {
2
2
  "schema": "protoboard.extension/v0",
3
3
  "id": "@protoboardai/ext-zephyr",
4
- "version": "0.2.0",
4
+ "version": "0.2.2",
5
5
  "description": "firmware provider: Zephyr board definitions for nRF52840 modules (devicetree with pinctrl, buses, devices, buttons, display; Kconfig), every setting citing the UHD facts it comes from.",
6
6
  "compatibility": {
7
7
  "protoboard": "^0.2.0",
@@ -20,20 +20,48 @@
20
20
  "summary": "Zephyr 4.2 board definition (board.yml, Kconfig, defconfig, devicetree, pinctrl) and a Kconfig fragment for an nRF52840 board",
21
21
  "native": "zephyr",
22
22
  "operations": {
23
- "generate": { "entry": "./ops/firmware.ts#generate", "summary": "Read the board into a firmware map, apply the rules, write the board definition and firmware.conf under zephyr/ with the line index" },
24
- "export": { "entry": "./ops/firmware.ts#exportOutputs", "summary": "Copy the generated files to out/config/ and write out/firmware.manifest.json (refuses files edited since generate)" },
25
- "extract": { "entry": "./ops/firmware.ts#extract", "summary": "Artifact references and the pins the devicetree names" },
26
- "check": { "entry": "./ops/firmware.ts#check", "summary": "Pin table, single use, bus functions, I2C addresses, strapping, wake sources, devicetree structure, and drift between the files and the board" }
23
+ "generate": {
24
+ "entry": "./ops/firmware.ts#generate",
25
+ "summary": "Read the board into a firmware map, apply the rules, write the board definition and firmware.conf under zephyr/ with the line index"
26
+ },
27
+ "export": {
28
+ "entry": "./ops/firmware.ts#exportOutputs",
29
+ "summary": "Copy the generated files to out/config/ and write out/firmware.manifest.json (refuses files edited since generate)"
30
+ },
31
+ "extract": {
32
+ "entry": "./ops/firmware.ts#extract",
33
+ "summary": "Artifact references and the pins the devicetree names"
34
+ },
35
+ "check": {
36
+ "entry": "./ops/firmware.ts#check",
37
+ "summary": "Pin table, single use, bus functions, I2C addresses, strapping, wake sources, devicetree structure, and drift between the files and the board"
38
+ }
27
39
  },
28
40
  "constraints": {
29
- "controller": { "description": "instance path of the controller, when the board has more than one microcontroller" },
30
- "board_name": { "description": "Zephyr board name (default: the module id with _ for -)" },
31
- "vendor": { "description": "board vendor folder and compatible prefix (default protoboard)" },
32
- "console": { "description": "UART bus id or UART device instance for zephyr,console" },
33
- "i2c_frequency_hz": { "description": "I2C bus clock: 100000 or 400000 (default: the fastest every device allows)" },
34
- "uart_baud": { "description": "{ <instance>: baud } for UART devices that state no baud_rate" },
35
- "wake": { "description": "[<button or device instance | net>] inputs that wake the chip from System OFF (written as zephyr,user wakeup-gpios)" },
36
- "properties": { "description": "{ <instance>: { <devicetree property>: value } } for what a driver binding requires and the model does not state" }
41
+ "controller": {
42
+ "description": "instance path of the controller, when the board has more than one microcontroller"
43
+ },
44
+ "board_name": {
45
+ "description": "Zephyr board name (default: the module id with _ for -)"
46
+ },
47
+ "vendor": {
48
+ "description": "board vendor folder and compatible prefix (default protoboard)"
49
+ },
50
+ "console": {
51
+ "description": "UART bus id or UART device instance for zephyr,console"
52
+ },
53
+ "i2c_frequency_hz": {
54
+ "description": "I2C bus clock: 100000 or 400000 (default: the fastest every device allows)"
55
+ },
56
+ "uart_baud": {
57
+ "description": "{ <instance>: baud } for UART devices that state no baud_rate"
58
+ },
59
+ "wake": {
60
+ "description": "[<button or device instance | net>] inputs that wake the chip from System OFF (written as zephyr,user wakeup-gpios)"
61
+ },
62
+ "properties": {
63
+ "description": "{ <instance>: { <devicetree property>: value } } for what a driver binding requires and the model does not state"
64
+ }
37
65
  }
38
66
  }
39
67
  ]