@propulsionworks/cloudformation 0.1.30 → 0.1.31

package/out/exports/resources.generated/aws-rds-dbcluster.d.ts

@@ -618,23 +618,19 @@ export type RDSDBClusterProps = {
     /**
      * Specifies whether the DB cluster is publicly accessible.
      *
-     * When the DB cluster is publicly accessible and you connect from outside of the DB cluster's virtual private cloud (VPC), its Domain Name System (DNS) endpoint resolves to the public IP address. When you connect from within the same VPC as the DB cluster, the endpoint resolves to the private IP address. Access to the DB cluster is ultimately controlled by the security group it uses. That public access isn't permitted if the security group assigned to the DB cluster doesn't permit it.
-     *
-     * When the DB cluster isn't publicly accessible, it is an internal DB cluster with a DNS name that resolves to a private IP address.
-     *
      * Valid for Cluster Type: Multi-AZ DB clusters only
      *
-     * Default: The default behavior varies depending on whether `DBSubnetGroupName` is specified.
+     * When the DB cluster is publicly accessible and you connect from outside of the DB cluster's virtual private cloud (VPC), its domain name system (DNS) endpoint resolves to the public IP address. When you connect from within the same VPC as the DB cluster, the endpoint resolves to the private IP address. Access to the DB cluster is controlled by its security group settings.
+     *
+     * When the DB cluster isn't publicly accessible, it is an internal DB cluster with a DNS name that resolves to a private IP address.
      *
-     * If `DBSubnetGroupName` isn't specified, and `PubliclyAccessible` isn't specified, the following applies:
+     * The default behavior when `PubliclyAccessible` is not specified depends on whether a `DBSubnetGroup` is specified.
      *
-     * - If the default VPC in the target Region doesn’t have an internet gateway attached to it, the DB cluster is private.
-     * - If the default VPC in the target Region has an internet gateway attached to it, the DB cluster is public.
+     * If `DBSubnetGroup` isn't specified, `PubliclyAccessible` defaults to `true` .
      *
-     * If `DBSubnetGroupName` is specified, and `PubliclyAccessible` isn't specified, the following applies:
+     * If `DBSubnetGroup` is specified, `PubliclyAccessible` defaults to `false` unless the value of `DBSubnetGroup` is `default` , in which case `PubliclyAccessible` defaults to `true` .
      *
-     * - If the subnets are part of a VPC that doesn’t have an internet gateway attached to it, the DB cluster is private.
-     * - If the subnets are part of a VPC that has an internet gateway attached to it, the DB cluster is public.
+     * If `PubliclyAccessible` is true and the VPC that the `DBSubnetGroup` is in doesn't have an internet gateway attached to it, Amazon RDS returns an error.
      * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-rds-dbcluster.html#cfn-rds-dbcluster-publiclyaccessible}
      */
     PubliclyAccessible?: boolean | undefined;

package/out/exports/resources.generated/aws-sagemaker-app.d.ts

@@ -90,7 +90,7 @@ export type ResourceSpec = {
      * > For *KernelGateway apps* , the `system` value is translated to `ml.t3.medium` . KernelGateway apps also support all other values for available instance types.
      * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-sagemaker-app-resourcespec.html#cfn-sagemaker-app-resourcespec-instancetype}
      */
-    InstanceType?: "system" | "ml.t3.micro" | "ml.t3.small" | "ml.t3.medium" | "ml.t3.large" | "ml.t3.xlarge" | "ml.t3.2xlarge" | "ml.m5.large" | "ml.m5.xlarge" | "ml.m5.2xlarge" | "ml.m5.4xlarge" | "ml.m5.8xlarge" | "ml.m5.12xlarge" | "ml.m5.16xlarge" | "ml.m5.24xlarge" | "ml.c5.large" | "ml.c5.xlarge" | "ml.c5.2xlarge" | "ml.c5.4xlarge" | "ml.c5.9xlarge" | "ml.c5.12xlarge" | "ml.c5.18xlarge" | "ml.c5.24xlarge" | "ml.p3.2xlarge" | "ml.p3.8xlarge" | "ml.p3.16xlarge" | "ml.g4dn.xlarge" | "ml.g4dn.2xlarge" | "ml.g4dn.4xlarge" | "ml.g4dn.8xlarge" | "ml.g4dn.12xlarge" | "ml.g4dn.16xlarge" | "ml.r5.large" | "ml.r5.xlarge" | "ml.r5.2xlarge" | "ml.r5.4xlarge" | "ml.r5.8xlarge" | "ml.r5.12xlarge" | "ml.r5.16xlarge" | "ml.r5.24xlarge" | "ml.p3dn.24xlarge" | "ml.m5d.large" | "ml.m5d.xlarge" | "ml.m5d.2xlarge" | "ml.m5d.4xlarge" | "ml.m5d.8xlarge" | "ml.m5d.12xlarge" | "ml.m5d.16xlarge" | "ml.m5d.24xlarge" | "ml.g5.xlarge" | "ml.g5.2xlarge" | "ml.g5.4xlarge" | "ml.g5.8xlarge" | "ml.g5.12xlarge" | "ml.g5.16xlarge" | "ml.g5.24xlarge" | "ml.g5.48xlarge" | "ml.p4d.24xlarge" | "ml.p4de.24xlarge" | "ml.geospatial.interactive" | "ml.trn1.2xlarge" | "ml.trn1.32xlarge" | "ml.trn1n.32xlarge" | undefined;
+    InstanceType?: "system" | "ml.t3.micro" | "ml.t3.small" | "ml.t3.medium" | "ml.t3.large" | "ml.t3.xlarge" | "ml.t3.2xlarge" | "ml.m5.large" | "ml.m5.xlarge" | "ml.m5.2xlarge" | "ml.m5.4xlarge" | "ml.m5.8xlarge" | "ml.m5.12xlarge" | "ml.m5.16xlarge" | "ml.m5.24xlarge" | "ml.m5d.large" | "ml.m5d.xlarge" | "ml.m5d.2xlarge" | "ml.m5d.4xlarge" | "ml.m5d.8xlarge" | "ml.m5d.12xlarge" | "ml.m5d.16xlarge" | "ml.m5d.24xlarge" | "ml.c5.large" | "ml.c5.xlarge" | "ml.c5.2xlarge" | "ml.c5.4xlarge" | "ml.c5.9xlarge" | "ml.c5.12xlarge" | "ml.c5.18xlarge" | "ml.c5.24xlarge" | "ml.p3.2xlarge" | "ml.p3.8xlarge" | "ml.p3.16xlarge" | "ml.p3dn.24xlarge" | "ml.g4dn.xlarge" | "ml.g4dn.2xlarge" | "ml.g4dn.4xlarge" | "ml.g4dn.8xlarge" | "ml.g4dn.12xlarge" | "ml.g4dn.16xlarge" | "ml.r5.large" | "ml.r5.xlarge" | "ml.r5.2xlarge" | "ml.r5.4xlarge" | "ml.r5.8xlarge" | "ml.r5.12xlarge" | "ml.r5.16xlarge" | "ml.r5.24xlarge" | "ml.g5.xlarge" | "ml.g5.2xlarge" | "ml.g5.4xlarge" | "ml.g5.8xlarge" | "ml.g5.12xlarge" | "ml.g5.16xlarge" | "ml.g5.24xlarge" | "ml.g5.48xlarge" | "ml.g6.xlarge" | "ml.g6.2xlarge" | "ml.g6.4xlarge" | "ml.g6.8xlarge" | "ml.g6.12xlarge" | "ml.g6.16xlarge" | "ml.g6.24xlarge" | "ml.g6.48xlarge" | "ml.g6e.xlarge" | "ml.g6e.2xlarge" | "ml.g6e.4xlarge" | "ml.g6e.8xlarge" | "ml.g6e.12xlarge" | "ml.g6e.16xlarge" | "ml.g6e.24xlarge" | "ml.g6e.48xlarge" | "ml.geospatial.interactive" | "ml.p4d.24xlarge" | "ml.p4de.24xlarge" | "ml.trn1.2xlarge" | "ml.trn1.32xlarge" | "ml.trn1n.32xlarge" | "ml.p5.48xlarge" | "ml.p5e.48xlarge" | "ml.p5en.48xlarge" | "ml.m6i.large" | "ml.m6i.xlarge" | "ml.m6i.2xlarge" | "ml.m6i.4xlarge" | "ml.m6i.8xlarge" | "ml.m6i.12xlarge" | "ml.m6i.16xlarge" | "ml.m6i.24xlarge" | "ml.m6i.32xlarge" | "ml.m7i.large" | "ml.m7i.xlarge" | "ml.m7i.2xlarge" | "ml.m7i.4xlarge" | "ml.m7i.8xlarge" | "ml.m7i.12xlarge" | "ml.m7i.16xlarge" | "ml.m7i.24xlarge" | "ml.m7i.48xlarge" | "ml.c6i.large" | "ml.c6i.xlarge" | "ml.c6i.2xlarge" | "ml.c6i.4xlarge" | "ml.c6i.8xlarge" | "ml.c6i.12xlarge" | "ml.c6i.16xlarge" | "ml.c6i.24xlarge" | "ml.c6i.32xlarge" | "ml.c7i.large" | "ml.c7i.xlarge" | "ml.c7i.2xlarge" | "ml.c7i.4xlarge" | "ml.c7i.8xlarge" | "ml.c7i.12xlarge" | "ml.c7i.16xlarge" | "ml.c7i.24xlarge" | "ml.c7i.48xlarge" | "ml.r6i.large" | "ml.r6i.xlarge" | "ml.r6i.2xlarge" | "ml.r6i.4xlarge" | "ml.r6i.8xlarge" | "ml.r6i.12xlarge" | "ml.r6i.16xlarge" | "ml.r6i.24xlarge" | "ml.r6i.32xlarge" | "ml.r7i.large" | "ml.r7i.xlarge" | "ml.r7i.2xlarge" | "ml.r7i.4xlarge" | "ml.r7i.8xlarge" | "ml.r7i.12xlarge" | "ml.r7i.16xlarge" | "ml.r7i.24xlarge" | "ml.r7i.48xlarge" | "ml.m6id.large" | "ml.m6id.xlarge" | "ml.m6id.2xlarge" | "ml.m6id.4xlarge" | "ml.m6id.8xlarge" | "ml.m6id.12xlarge" | "ml.m6id.16xlarge" | "ml.m6id.24xlarge" | "ml.m6id.32xlarge" | "ml.c6id.large" | "ml.c6id.xlarge" | "ml.c6id.2xlarge" | "ml.c6id.4xlarge" | "ml.c6id.8xlarge" | "ml.c6id.12xlarge" | "ml.c6id.16xlarge" | "ml.c6id.24xlarge" | "ml.c6id.32xlarge" | "ml.r6id.large" | "ml.r6id.xlarge" | "ml.r6id.2xlarge" | "ml.r6id.4xlarge" | "ml.r6id.8xlarge" | "ml.r6id.12xlarge" | "ml.r6id.16xlarge" | "ml.r6id.24xlarge" | "ml.r6id.32xlarge" | undefined;
     /**
      * The Amazon Resource Name (ARN) of the Lifecycle Configuration attached to the Resource.
      * @maxLength 256

package/out/exports/resources.generated/aws-sagemaker-cluster.d.ts

@@ -64,6 +64,10 @@ export type SageMakerClusterProps = {
      * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-sagemaker-cluster.html#cfn-sagemaker-cluster-tags}
      */
     Tags?: Tag[] | undefined;
+    /**
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-sagemaker-cluster.html#cfn-sagemaker-cluster-tieredstorageconfig}
+     */
+    TieredStorageConfig?: TieredStorageConfig | undefined;
     /**
      * Specifies an Amazon Virtual Private Cloud (VPC) that your SageMaker jobs, hosted models, and compute resources have access to. You can control access to and from your resources by configuring a VPC. For more information, see [Give SageMaker Access to Resources in your Amazon VPC](https://docs.aws.amazon.com/sagemaker/latest/dg/infrastructure-give-access.html) .
      * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-sagemaker-cluster.html#cfn-sagemaker-cluster-vpcconfig}
@@ -462,6 +466,22 @@ export type ScheduledUpdateConfig = {
      */
     ScheduleExpression: string;
 };
+/**
+ * Configuration for tiered storage in the SageMaker HyperPod cluster.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-sagemaker-cluster-tieredstorageconfig.html}
+ */
+export type TieredStorageConfig = {
+    /**
+     * The percentage of instance memory to allocate for tiered storage.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-sagemaker-cluster-tieredstorageconfig.html#cfn-sagemaker-cluster-tieredstorageconfig-instancememoryallocationpercentage}
+     */
+    InstanceMemoryAllocationPercentage?: number | undefined;
+    /**
+     * The mode of tiered storage.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-sagemaker-cluster-tieredstorageconfig.html#cfn-sagemaker-cluster-tieredstorageconfig-mode}
+     */
+    Mode: "Enable" | "Disable";
+};
 /**
  * Specifies an Amazon Virtual Private Cloud (VPC) that your SageMaker jobs, hosted models, and compute resources have access to. You can control access to and from your resources by configuring a VPC. For more information, see [Give SageMaker Access to Resources in your Amazon VPC](https://docs.aws.amazon.com/sagemaker/latest/dg/infrastructure-give-access.html) .
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-sagemaker-cluster-vpcconfig.html}

package/out/exports/resources.generated/aws-sagemaker-domain.d.ts

@@ -197,7 +197,7 @@ export type SageMakerDomainAttribs = {
  * The instance type that the image version runs on.
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-sagemaker-domain-appinstancetype.html}
  */
-export type AppInstanceType = "system" | "ml.t3.micro" | "ml.t3.small" | "ml.t3.medium" | "ml.t3.large" | "ml.t3.xlarge" | "ml.t3.2xlarge" | "ml.m5.large" | "ml.m5.xlarge" | "ml.m5.2xlarge" | "ml.m5.4xlarge" | "ml.m5.8xlarge" | "ml.m5.12xlarge" | "ml.m5.16xlarge" | "ml.m5.24xlarge" | "ml.m5d.large" | "ml.m5d.xlarge" | "ml.m5d.2xlarge" | "ml.m5d.4xlarge" | "ml.m5d.8xlarge" | "ml.m5d.12xlarge" | "ml.m5d.16xlarge" | "ml.m5d.24xlarge" | "ml.c5.large" | "ml.c5.xlarge" | "ml.c5.2xlarge" | "ml.c5.4xlarge" | "ml.c5.9xlarge" | "ml.c5.12xlarge" | "ml.c5.18xlarge" | "ml.c5.24xlarge" | "ml.p3.2xlarge" | "ml.p3.8xlarge" | "ml.p3.16xlarge" | "ml.p3dn.24xlarge" | "ml.g4dn.xlarge" | "ml.g4dn.2xlarge" | "ml.g4dn.4xlarge" | "ml.g4dn.8xlarge" | "ml.g4dn.12xlarge" | "ml.g4dn.16xlarge" | "ml.r5.large" | "ml.r5.xlarge" | "ml.r5.2xlarge" | "ml.r5.4xlarge" | "ml.r5.8xlarge" | "ml.r5.12xlarge" | "ml.r5.16xlarge" | "ml.r5.24xlarge" | "ml.g5.xlarge" | "ml.g5.2xlarge" | "ml.g5.4xlarge" | "ml.g5.8xlarge" | "ml.g5.12xlarge" | "ml.g5.16xlarge" | "ml.g5.24xlarge" | "ml.g5.48xlarge" | "ml.g6.xlarge" | "ml.g6.2xlarge" | "ml.g6.4xlarge" | "ml.g6.8xlarge" | "ml.g6.12xlarge" | "ml.g6.16xlarge" | "ml.g6.24xlarge" | "ml.g6.48xlarge" | "ml.g6e.xlarge" | "ml.g6e.2xlarge" | "ml.g6e.4xlarge" | "ml.g6e.8xlarge" | "ml.g6e.12xlarge" | "ml.g6e.16xlarge" | "ml.g6e.24xlarge" | "ml.g6e.48xlarge" | "ml.geospatial.interactive" | "ml.p4d.24xlarge" | "ml.p4de.24xlarge" | "ml.trn1.2xlarge" | "ml.trn1.32xlarge" | "ml.trn1n.32xlarge" | "ml.p5.48xlarge" | "ml.m6i.large" | "ml.m6i.xlarge" | "ml.m6i.2xlarge" | "ml.m6i.4xlarge" | "ml.m6i.8xlarge" | "ml.m6i.12xlarge" | "ml.m6i.16xlarge" | "ml.m6i.24xlarge" | "ml.m6i.32xlarge" | "ml.m7i.large" | "ml.m7i.xlarge" | "ml.m7i.2xlarge" | "ml.m7i.4xlarge" | "ml.m7i.8xlarge" | "ml.m7i.12xlarge" | "ml.m7i.16xlarge" | "ml.m7i.24xlarge" | "ml.m7i.48xlarge" | "ml.c6i.large" | "ml.c6i.xlarge" | "ml.c6i.2xlarge" | "ml.c6i.4xlarge" | "ml.c6i.8xlarge" | "ml.c6i.12xlarge" | "ml.c6i.16xlarge" | "ml.c6i.24xlarge" | "ml.c6i.32xlarge" | "ml.c7i.large" | "ml.c7i.xlarge" | "ml.c7i.2xlarge" | "ml.c7i.4xlarge" | "ml.c7i.8xlarge" | "ml.c7i.12xlarge" | "ml.c7i.16xlarge" | "ml.c7i.24xlarge" | "ml.c7i.48xlarge" | "ml.r6i.large" | "ml.r6i.xlarge" | "ml.r6i.2xlarge" | "ml.r6i.4xlarge" | "ml.r6i.8xlarge" | "ml.r6i.12xlarge" | "ml.r6i.16xlarge" | "ml.r6i.24xlarge" | "ml.r6i.32xlarge" | "ml.r7i.large" | "ml.r7i.xlarge" | "ml.r7i.2xlarge" | "ml.r7i.4xlarge" | "ml.r7i.8xlarge" | "ml.r7i.12xlarge" | "ml.r7i.16xlarge" | "ml.r7i.24xlarge" | "ml.r7i.48xlarge" | "ml.m6id.large" | "ml.m6id.xlarge" | "ml.m6id.2xlarge" | "ml.m6id.4xlarge" | "ml.m6id.8xlarge" | "ml.m6id.12xlarge" | "ml.m6id.16xlarge" | "ml.m6id.24xlarge" | "ml.m6id.32xlarge" | "ml.c6id.large" | "ml.c6id.xlarge" | "ml.c6id.2xlarge" | "ml.c6id.4xlarge" | "ml.c6id.8xlarge" | "ml.c6id.12xlarge" | "ml.c6id.16xlarge" | "ml.c6id.24xlarge" | "ml.c6id.32xlarge" | "ml.r6id.large" | "ml.r6id.xlarge" | "ml.r6id.2xlarge" | "ml.r6id.4xlarge" | "ml.r6id.8xlarge" | "ml.r6id.12xlarge" | "ml.r6id.16xlarge" | "ml.r6id.24xlarge" | "ml.r6id.32xlarge";
+export type AppInstanceType = "system" | "ml.t3.micro" | "ml.t3.small" | "ml.t3.medium" | "ml.t3.large" | "ml.t3.xlarge" | "ml.t3.2xlarge" | "ml.m5.large" | "ml.m5.xlarge" | "ml.m5.2xlarge" | "ml.m5.4xlarge" | "ml.m5.8xlarge" | "ml.m5.12xlarge" | "ml.m5.16xlarge" | "ml.m5.24xlarge" | "ml.m5d.large" | "ml.m5d.xlarge" | "ml.m5d.2xlarge" | "ml.m5d.4xlarge" | "ml.m5d.8xlarge" | "ml.m5d.12xlarge" | "ml.m5d.16xlarge" | "ml.m5d.24xlarge" | "ml.c5.large" | "ml.c5.xlarge" | "ml.c5.2xlarge" | "ml.c5.4xlarge" | "ml.c5.9xlarge" | "ml.c5.12xlarge" | "ml.c5.18xlarge" | "ml.c5.24xlarge" | "ml.p3.2xlarge" | "ml.p3.8xlarge" | "ml.p3.16xlarge" | "ml.p3dn.24xlarge" | "ml.g4dn.xlarge" | "ml.g4dn.2xlarge" | "ml.g4dn.4xlarge" | "ml.g4dn.8xlarge" | "ml.g4dn.12xlarge" | "ml.g4dn.16xlarge" | "ml.r5.large" | "ml.r5.xlarge" | "ml.r5.2xlarge" | "ml.r5.4xlarge" | "ml.r5.8xlarge" | "ml.r5.12xlarge" | "ml.r5.16xlarge" | "ml.r5.24xlarge" | "ml.g5.xlarge" | "ml.g5.2xlarge" | "ml.g5.4xlarge" | "ml.g5.8xlarge" | "ml.g5.12xlarge" | "ml.g5.16xlarge" | "ml.g5.24xlarge" | "ml.g5.48xlarge" | "ml.g6.xlarge" | "ml.g6.2xlarge" | "ml.g6.4xlarge" | "ml.g6.8xlarge" | "ml.g6.12xlarge" | "ml.g6.16xlarge" | "ml.g6.24xlarge" | "ml.g6.48xlarge" | "ml.g6e.xlarge" | "ml.g6e.2xlarge" | "ml.g6e.4xlarge" | "ml.g6e.8xlarge" | "ml.g6e.12xlarge" | "ml.g6e.16xlarge" | "ml.g6e.24xlarge" | "ml.g6e.48xlarge" | "ml.geospatial.interactive" | "ml.p4d.24xlarge" | "ml.p4de.24xlarge" | "ml.trn1.2xlarge" | "ml.trn1.32xlarge" | "ml.trn1n.32xlarge" | "ml.p5.48xlarge" | "ml.p5e.48xlarge" | "ml.p5en.48xlarge" | "ml.m6i.large" | "ml.m6i.xlarge" | "ml.m6i.2xlarge" | "ml.m6i.4xlarge" | "ml.m6i.8xlarge" | "ml.m6i.12xlarge" | "ml.m6i.16xlarge" | "ml.m6i.24xlarge" | "ml.m6i.32xlarge" | "ml.m7i.large" | "ml.m7i.xlarge" | "ml.m7i.2xlarge" | "ml.m7i.4xlarge" | "ml.m7i.8xlarge" | "ml.m7i.12xlarge" | "ml.m7i.16xlarge" | "ml.m7i.24xlarge" | "ml.m7i.48xlarge" | "ml.c6i.large" | "ml.c6i.xlarge" | "ml.c6i.2xlarge" | "ml.c6i.4xlarge" | "ml.c6i.8xlarge" | "ml.c6i.12xlarge" | "ml.c6i.16xlarge" | "ml.c6i.24xlarge" | "ml.c6i.32xlarge" | "ml.c7i.large" | "ml.c7i.xlarge" | "ml.c7i.2xlarge" | "ml.c7i.4xlarge" | "ml.c7i.8xlarge" | "ml.c7i.12xlarge" | "ml.c7i.16xlarge" | "ml.c7i.24xlarge" | "ml.c7i.48xlarge" | "ml.r6i.large" | "ml.r6i.xlarge" | "ml.r6i.2xlarge" | "ml.r6i.4xlarge" | "ml.r6i.8xlarge" | "ml.r6i.12xlarge" | "ml.r6i.16xlarge" | "ml.r6i.24xlarge" | "ml.r6i.32xlarge" | "ml.r7i.large" | "ml.r7i.xlarge" | "ml.r7i.2xlarge" | "ml.r7i.4xlarge" | "ml.r7i.8xlarge" | "ml.r7i.12xlarge" | "ml.r7i.16xlarge" | "ml.r7i.24xlarge" | "ml.r7i.48xlarge" | "ml.m6id.large" | "ml.m6id.xlarge" | "ml.m6id.2xlarge" | "ml.m6id.4xlarge" | "ml.m6id.8xlarge" | "ml.m6id.12xlarge" | "ml.m6id.16xlarge" | "ml.m6id.24xlarge" | "ml.m6id.32xlarge" | "ml.c6id.large" | "ml.c6id.xlarge" | "ml.c6id.2xlarge" | "ml.c6id.4xlarge" | "ml.c6id.8xlarge" | "ml.c6id.12xlarge" | "ml.c6id.16xlarge" | "ml.c6id.24xlarge" | "ml.c6id.32xlarge" | "ml.r6id.large" | "ml.r6id.xlarge" | "ml.r6id.2xlarge" | "ml.r6id.4xlarge" | "ml.r6id.8xlarge" | "ml.r6id.12xlarge" | "ml.r6id.16xlarge" | "ml.r6id.24xlarge" | "ml.r6id.32xlarge";
 /**
  * Settings that are used to configure and manage the lifecycle of Amazon SageMaker Studio applications.
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-sagemaker-domain-applifecyclemanagement.html}
@@ -437,6 +437,11 @@ export type DomainSettings = {
      * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-sagemaker-domain-domainsettings.html#cfn-sagemaker-domain-domainsettings-executionroleidentityconfig}
      */
     ExecutionRoleIdentityConfig?: "USER_PROFILE_NAME" | "DISABLED" | undefined;
+    /**
+     * The IP address type for the domain. Specify `ipv4` for IPv4-only connectivity or `dualstack` for both IPv4 and IPv6 connectivity. When you specify `dualstack` , the subnet must support IPv6 CIDR blocks. If not specified, defaults to `ipv4` .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-sagemaker-domain-domainsettings.html#cfn-sagemaker-domain-domainsettings-ipaddresstype}
+     */
+    IpAddressType?: IpAddressType | undefined;
     /**
      * A collection of settings that configure the `RStudioServerPro` Domain-level app.
      * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-sagemaker-domain-domainsettings.html#cfn-sagemaker-domain-domainsettings-rstudioserverprodomainsettings}
@@ -539,6 +544,11 @@ export type IdleSettings = {
      */
     MinIdleTimeoutInMinutes?: number | undefined;
 };
+/**
+ * A setting to indicate if IPv6 routing should be enabled along with IPv4 or not
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-sagemaker-domain-ipaddresstype.html}
+ */
+export type IpAddressType = "IPV4" | "DUALSTACK";
 /**
  * The settings for the JupyterLab application.
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-sagemaker-domain-jupyterlabappsettings.html}
@@ -713,7 +723,7 @@ export type ResourceSpec = {
      * > For *KernelGateway apps* , the `system` value is translated to `ml.t3.medium` . KernelGateway apps also support all other values for available instance types.
      * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-sagemaker-domain-resourcespec.html#cfn-sagemaker-domain-resourcespec-instancetype}
      */
-    InstanceType?: "system" | "ml.t3.micro" | "ml.t3.small" | "ml.t3.medium" | "ml.t3.large" | "ml.t3.xlarge" | "ml.t3.2xlarge" | "ml.m5.large" | "ml.m5.xlarge" | "ml.m5.2xlarge" | "ml.m5.4xlarge" | "ml.m5.8xlarge" | "ml.m5.12xlarge" | "ml.m5.16xlarge" | "ml.m5.24xlarge" | "ml.c5.large" | "ml.c5.xlarge" | "ml.c5.2xlarge" | "ml.c5.4xlarge" | "ml.c5.9xlarge" | "ml.c5.12xlarge" | "ml.c5.18xlarge" | "ml.c5.24xlarge" | "ml.p3.2xlarge" | "ml.p3.8xlarge" | "ml.p3.16xlarge" | "ml.g4dn.xlarge" | "ml.g4dn.2xlarge" | "ml.g4dn.4xlarge" | "ml.g4dn.8xlarge" | "ml.g4dn.12xlarge" | "ml.g4dn.16xlarge" | "ml.r5.large" | "ml.r5.xlarge" | "ml.r5.2xlarge" | "ml.r5.4xlarge" | "ml.r5.8xlarge" | "ml.r5.12xlarge" | "ml.r5.16xlarge" | "ml.r5.24xlarge" | "ml.p3dn.24xlarge" | "ml.m5d.large" | "ml.m5d.xlarge" | "ml.m5d.2xlarge" | "ml.m5d.4xlarge" | "ml.m5d.8xlarge" | "ml.m5d.12xlarge" | "ml.m5d.16xlarge" | "ml.m5d.24xlarge" | "ml.g5.xlarge" | "ml.g5.2xlarge" | "ml.g5.4xlarge" | "ml.g5.8xlarge" | "ml.g5.12xlarge" | "ml.g5.16xlarge" | "ml.g5.24xlarge" | "ml.g5.48xlarge" | "ml.p4d.24xlarge" | "ml.p4de.24xlarge" | "ml.geospatial.interactive" | "ml.trn1.2xlarge" | "ml.trn1.32xlarge" | "ml.trn1n.32xlarge" | undefined;
+    InstanceType?: AppInstanceType | undefined;
     /**
      * The Amazon Resource Name (ARN) of the Lifecycle Configuration attached to the Resource.
      * @maxLength 256

package/out/exports/resources.generated/aws-sagemaker-userprofile.d.ts

@@ -442,7 +442,7 @@ export type ResourceSpec = {
      * > For *KernelGateway apps* , the `system` value is translated to `ml.t3.medium` . KernelGateway apps also support all other values for available instance types.
      * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-sagemaker-userprofile-resourcespec.html#cfn-sagemaker-userprofile-resourcespec-instancetype}
      */
-    InstanceType?: "system" | "ml.t3.micro" | "ml.t3.small" | "ml.t3.medium" | "ml.t3.large" | "ml.t3.xlarge" | "ml.t3.2xlarge" | "ml.m5.large" | "ml.m5.xlarge" | "ml.m5.2xlarge" | "ml.m5.4xlarge" | "ml.m5.8xlarge" | "ml.m5.12xlarge" | "ml.m5.16xlarge" | "ml.m5.24xlarge" | "ml.c5.large" | "ml.c5.xlarge" | "ml.c5.2xlarge" | "ml.c5.4xlarge" | "ml.c5.9xlarge" | "ml.c5.12xlarge" | "ml.c5.18xlarge" | "ml.c5.24xlarge" | "ml.p3.2xlarge" | "ml.p3.8xlarge" | "ml.p3.16xlarge" | "ml.g4dn.xlarge" | "ml.g4dn.2xlarge" | "ml.g4dn.4xlarge" | "ml.g4dn.8xlarge" | "ml.g4dn.12xlarge" | "ml.g4dn.16xlarge" | "ml.r5.large" | "ml.r5.xlarge" | "ml.r5.2xlarge" | "ml.r5.4xlarge" | "ml.r5.8xlarge" | "ml.r5.12xlarge" | "ml.r5.16xlarge" | "ml.r5.24xlarge" | "ml.p3dn.24xlarge" | "ml.m5d.large" | "ml.m5d.xlarge" | "ml.m5d.2xlarge" | "ml.m5d.4xlarge" | "ml.m5d.8xlarge" | "ml.m5d.12xlarge" | "ml.m5d.16xlarge" | "ml.m5d.24xlarge" | "ml.g5.xlarge" | "ml.g5.2xlarge" | "ml.g5.4xlarge" | "ml.g5.8xlarge" | "ml.g5.12xlarge" | "ml.g5.16xlarge" | "ml.g5.24xlarge" | "ml.g5.48xlarge" | "ml.p4d.24xlarge" | "ml.p4de.24xlarge" | "ml.geospatial.interactive" | "ml.trn1.2xlarge" | "ml.trn1.32xlarge" | "ml.trn1n.32xlarge" | undefined;
+    InstanceType?: "system" | "ml.t3.micro" | "ml.t3.small" | "ml.t3.medium" | "ml.t3.large" | "ml.t3.xlarge" | "ml.t3.2xlarge" | "ml.m5.large" | "ml.m5.xlarge" | "ml.m5.2xlarge" | "ml.m5.4xlarge" | "ml.m5.8xlarge" | "ml.m5.12xlarge" | "ml.m5.16xlarge" | "ml.m5.24xlarge" | "ml.m5d.large" | "ml.m5d.xlarge" | "ml.m5d.2xlarge" | "ml.m5d.4xlarge" | "ml.m5d.8xlarge" | "ml.m5d.12xlarge" | "ml.m5d.16xlarge" | "ml.m5d.24xlarge" | "ml.c5.large" | "ml.c5.xlarge" | "ml.c5.2xlarge" | "ml.c5.4xlarge" | "ml.c5.9xlarge" | "ml.c5.12xlarge" | "ml.c5.18xlarge" | "ml.c5.24xlarge" | "ml.p3.2xlarge" | "ml.p3.8xlarge" | "ml.p3.16xlarge" | "ml.p3dn.24xlarge" | "ml.g4dn.xlarge" | "ml.g4dn.2xlarge" | "ml.g4dn.4xlarge" | "ml.g4dn.8xlarge" | "ml.g4dn.12xlarge" | "ml.g4dn.16xlarge" | "ml.r5.large" | "ml.r5.xlarge" | "ml.r5.2xlarge" | "ml.r5.4xlarge" | "ml.r5.8xlarge" | "ml.r5.12xlarge" | "ml.r5.16xlarge" | "ml.r5.24xlarge" | "ml.g5.xlarge" | "ml.g5.2xlarge" | "ml.g5.4xlarge" | "ml.g5.8xlarge" | "ml.g5.12xlarge" | "ml.g5.16xlarge" | "ml.g5.24xlarge" | "ml.g5.48xlarge" | "ml.g6.xlarge" | "ml.g6.2xlarge" | "ml.g6.4xlarge" | "ml.g6.8xlarge" | "ml.g6.12xlarge" | "ml.g6.16xlarge" | "ml.g6.24xlarge" | "ml.g6.48xlarge" | "ml.g6e.xlarge" | "ml.g6e.2xlarge" | "ml.g6e.4xlarge" | "ml.g6e.8xlarge" | "ml.g6e.12xlarge" | "ml.g6e.16xlarge" | "ml.g6e.24xlarge" | "ml.g6e.48xlarge" | "ml.geospatial.interactive" | "ml.p4d.24xlarge" | "ml.p4de.24xlarge" | "ml.trn1.2xlarge" | "ml.trn1.32xlarge" | "ml.trn1n.32xlarge" | "ml.p5.48xlarge" | "ml.p5e.48xlarge" | "ml.p5en.48xlarge" | "ml.m6i.large" | "ml.m6i.xlarge" | "ml.m6i.2xlarge" | "ml.m6i.4xlarge" | "ml.m6i.8xlarge" | "ml.m6i.12xlarge" | "ml.m6i.16xlarge" | "ml.m6i.24xlarge" | "ml.m6i.32xlarge" | "ml.m7i.large" | "ml.m7i.xlarge" | "ml.m7i.2xlarge" | "ml.m7i.4xlarge" | "ml.m7i.8xlarge" | "ml.m7i.12xlarge" | "ml.m7i.16xlarge" | "ml.m7i.24xlarge" | "ml.m7i.48xlarge" | "ml.c6i.large" | "ml.c6i.xlarge" | "ml.c6i.2xlarge" | "ml.c6i.4xlarge" | "ml.c6i.8xlarge" | "ml.c6i.12xlarge" | "ml.c6i.16xlarge" | "ml.c6i.24xlarge" | "ml.c6i.32xlarge" | "ml.c7i.large" | "ml.c7i.xlarge" | "ml.c7i.2xlarge" | "ml.c7i.4xlarge" | "ml.c7i.8xlarge" | "ml.c7i.12xlarge" | "ml.c7i.16xlarge" | "ml.c7i.24xlarge" | "ml.c7i.48xlarge" | "ml.r6i.large" | "ml.r6i.xlarge" | "ml.r6i.2xlarge" | "ml.r6i.4xlarge" | "ml.r6i.8xlarge" | "ml.r6i.12xlarge" | "ml.r6i.16xlarge" | "ml.r6i.24xlarge" | "ml.r6i.32xlarge" | "ml.r7i.large" | "ml.r7i.xlarge" | "ml.r7i.2xlarge" | "ml.r7i.4xlarge" | "ml.r7i.8xlarge" | "ml.r7i.12xlarge" | "ml.r7i.16xlarge" | "ml.r7i.24xlarge" | "ml.r7i.48xlarge" | "ml.m6id.large" | "ml.m6id.xlarge" | "ml.m6id.2xlarge" | "ml.m6id.4xlarge" | "ml.m6id.8xlarge" | "ml.m6id.12xlarge" | "ml.m6id.16xlarge" | "ml.m6id.24xlarge" | "ml.m6id.32xlarge" | "ml.c6id.large" | "ml.c6id.xlarge" | "ml.c6id.2xlarge" | "ml.c6id.4xlarge" | "ml.c6id.8xlarge" | "ml.c6id.12xlarge" | "ml.c6id.16xlarge" | "ml.c6id.24xlarge" | "ml.c6id.32xlarge" | "ml.r6id.large" | "ml.r6id.xlarge" | "ml.r6id.2xlarge" | "ml.r6id.4xlarge" | "ml.r6id.8xlarge" | "ml.r6id.12xlarge" | "ml.r6id.16xlarge" | "ml.r6id.24xlarge" | "ml.r6id.32xlarge" | undefined;
     /**
      * The Amazon Resource Name (ARN) of the Lifecycle Configuration attached to the Resource.
      * @maxLength 256

package/out/exports/resources.generated/aws-servicecatalog-launchnotificationconstraint.d.ts

@@ -43,6 +43,7 @@ export type ServiceCatalogLaunchNotificationConstraintProps = {
  */
 export type ServiceCatalogLaunchNotificationConstraintAttribs = {
     /**
+     * Unique identifier for the constraint
      * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-launchnotificationconstraint.html#cfn-servicecatalog-launchnotificationconstraint-id}
      */
     Id: string;

package/out/exports/resources.generated/aws-servicecatalog-tagoptionassociation.d.ts

@@ -1,9 +1,9 @@
-import type { ResourceDefinitionWithAttributes } from "../main.ts";
+import type { ResourceDefinition } from "../main.ts";
 /**
  * Associate the specified TagOption with the specified portfolio or product.
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-tagoptionassociation.html}
  */
-export type ServiceCatalogTagOptionAssociation = ResourceDefinitionWithAttributes<"AWS::ServiceCatalog::TagOptionAssociation", ServiceCatalogTagOptionAssociationProps, ServiceCatalogTagOptionAssociationAttribs>;
+export type ServiceCatalogTagOptionAssociation = ResourceDefinition<"AWS::ServiceCatalog::TagOptionAssociation", ServiceCatalogTagOptionAssociationProps>;
 /**
  * Associate the specified TagOption with the specified portfolio or product.
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-tagoptionassociation.html}
@@ -13,20 +13,11 @@ export type ServiceCatalogTagOptionAssociationProps = {
      * The resource identifier.
      * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-tagoptionassociation.html#cfn-servicecatalog-tagoptionassociation-resourceid}
      */
-    ResourceId: string;
+    ResourceId?: string | undefined;
     /**
      * The TagOption identifier.
      * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-tagoptionassociation.html#cfn-servicecatalog-tagoptionassociation-tagoptionid}
      */
-    TagOptionId: string;
-};
-/**
- * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-tagoptionassociation.html#aws-resource-servicecatalog-tagoptionassociation-return-values}
- */
-export type ServiceCatalogTagOptionAssociationAttribs = {
-    /**
-     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-servicecatalog-tagoptionassociation.html#cfn-servicecatalog-tagoptionassociation-id}
-     */
-    Id: string;
+    TagOptionId?: string | undefined;
 };
 //# sourceMappingURL=aws-servicecatalog-tagoptionassociation.d.ts.map

package/out/exports/resources.generated/aws-ssm-patchbaseline.d.ts

@@ -225,6 +225,8 @@ export type Rule = {
     /**
      * The number of days after the release date of each patch matched by the rule that the patch is marked as approved in the patch baseline. For example, a value of `7` means that patches are approved seven days after they are released.
      *
+     * Patch Manager evaluates patch release dates using Coordinated Universal Time (UTC). If the day represented by `7` is `2025-11-16` , patches released between `2025-11-16T00:00:00Z` and `2025-11-16T23:59:59Z` will be included in the approval.
+     *
      * This parameter is marked as `Required: No` , but your request must include a value for either `ApproveAfterDays` or `ApproveUntilDate` .
      *
      * Not supported for Debian Server or Ubuntu Server.
@@ -238,7 +240,9 @@ export type Rule = {
     /**
      * The cutoff date for auto approval of released patches. Any patches released on or before this date are installed automatically.
      *
-     * Enter dates in the format `YYYY-MM-DD` . For example, `2024-12-31` .
+     * Enter dates in the format `YYYY-MM-DD` . For example, `2025-11-16` .
+     *
+     * Patch Manager evaluates patch release dates using Coordinated Universal Time (UTC). If you enter the date `2025-11-16` , patches released between `2025-11-16T00:00:00Z` and `2025-11-16T23:59:59Z` will be included in the approval.
      *
      * This parameter is marked as `Required: No` , but your request must include a value for either `ApproveUntilDate` or `ApproveAfterDays` .
      *

package/out/exports/resources.generated/aws-ssmquicksetup-lifecycleautomation.d.ts

@@ -0,0 +1,52 @@
+import type { ResourceDefinitionWithAttributes } from "../main.ts";
+/**
+ * Creates a lifecycle automation resource that executes SSM Automation documents during AWS CloudFormation stack operations. This resource replaces inline AWS Lambda custom resources and provides a managed way to handle lifecycle events in Quick Setup configurations.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssmquicksetup-lifecycleautomation.html}
+ */
+export type SSMQuickSetupLifecycleAutomation = ResourceDefinitionWithAttributes<"AWS::SSMQuickSetup::LifecycleAutomation", SSMQuickSetupLifecycleAutomationProps, SSMQuickSetupLifecycleAutomationAttribs>;
+/**
+ * Creates a lifecycle automation resource that executes SSM Automation documents during AWS CloudFormation stack operations. This resource replaces inline AWS Lambda custom resources and provides a managed way to handle lifecycle events in Quick Setup configurations.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssmquicksetup-lifecycleautomation.html}
+ */
+export type SSMQuickSetupLifecycleAutomationProps = {
+    /**
+     * The name of the SSM Automation document to execute in response to AWS CloudFormation lifecycle events (CREATE, UPDATE, DELETE).
+     * @minLength 1
+     * @maxLength 500
+     * @pattern ^\S+$
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssmquicksetup-lifecycleautomation.html#cfn-ssmquicksetup-lifecycleautomation-automationdocument}
+     */
+    AutomationDocument: string;
+    /**
+     * A map of key-value parameters passed to the Automation document during execution. Each parameter name maps to a list of values, even for single values. Parameters can include configuration-specific values for your automation workflow.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssmquicksetup-lifecycleautomation.html#cfn-ssmquicksetup-lifecycleautomation-automationparameters}
+     */
+    AutomationParameters: Record<string, string[]>;
+    /**
+     * A unique identifier used for generating the SSM Association name. This ensures uniqueness when multiple lifecycle automation resources exist in the same stack.
+     * @minLength 1
+     * @maxLength 64
+     * @pattern ^[a-zA-Z0-9-]+$
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssmquicksetup-lifecycleautomation.html#cfn-ssmquicksetup-lifecycleautomation-resourcekey}
+     */
+    ResourceKey: string;
+    /**
+     * Tags applied to the underlying SSM Association created by this resource. Tags help identify and organize automation executions.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssmquicksetup-lifecycleautomation.html#cfn-ssmquicksetup-lifecycleautomation-tags}
+     */
+    Tags?: Record<string, string> | undefined;
+};
+/**
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssmquicksetup-lifecycleautomation.html#aws-resource-ssmquicksetup-lifecycleautomation-return-values}
+ */
+export type SSMQuickSetupLifecycleAutomationAttribs = {
+    /**
+     * Returns the ID of the SSM Association created to manage the automation document execution lifecycle.
+     * @minLength 1
+     * @maxLength 64
+     * @pattern ^[a-zA-Z0-9-]+$
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ssmquicksetup-lifecycleautomation.html#cfn-ssmquicksetup-lifecycleautomation-associationid}
+     */
+    AssociationId: string;
+};
+//# sourceMappingURL=aws-ssmquicksetup-lifecycleautomation.d.ts.map

package/out/exports/resources.generated/aws-synthetics-canary.d.ts

@@ -219,6 +219,10 @@ export type BrowserType = "CHROME" | "FIREFOX";
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-synthetics-canary-code.html}
  */
 export type Code = {
+    /**
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-synthetics-canary-code.html#cfn-synthetics-canary-code-blueprinttypes}
+     */
+    BlueprintTypes?: string[] | undefined;
     /**
      * List of Lambda layers to attach to the canary
      * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-synthetics-canary-code.html#cfn-synthetics-canary-code-dependencies}
@@ -250,6 +254,45 @@ export type Code = {
      */
     Script?: string | undefined;
 } | {
+    /**
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-synthetics-canary-code.html#cfn-synthetics-canary-code-blueprinttypes}
+     */
+    BlueprintTypes: string[];
+    /**
+     * List of Lambda layers to attach to the canary
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-synthetics-canary-code.html#cfn-synthetics-canary-code-dependencies}
+     */
+    Dependencies?: Dependency[] | undefined;
+    /**
+     * The entry point to use for the source code when running the canary. For canaries that use the `syn-python-selenium-1.0` runtime or a `syn-nodejs.puppeteer` runtime earlier than `syn-nodejs.puppeteer-3.4` , the handler must be specified as `*fileName* .handler` . For `syn-python-selenium-1.1` , `syn-nodejs.puppeteer-3.4` , and later runtimes, the handler can be specified as `*fileName* . *functionName*` , or you can specify a folder where canary scripts reside as `*folder* / *fileName* . *functionName*` .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-synthetics-canary-code.html#cfn-synthetics-canary-code-handler}
+     */
+    Handler?: string | undefined;
+    /**
+     * If your canary script is located in S3, specify the bucket name here. The bucket must already exist.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-synthetics-canary-code.html#cfn-synthetics-canary-code-s3bucket}
+     */
+    S3Bucket: string;
+    /**
+     * The Amazon S3 key of your script. For more information, see [Working with Amazon S3 Objects](https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingObjects.html) .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-synthetics-canary-code.html#cfn-synthetics-canary-code-s3key}
+     */
+    S3Key: string;
+    /**
+     * The Amazon S3 version ID of your script.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-synthetics-canary-code.html#cfn-synthetics-canary-code-s3objectversion}
+     */
+    S3ObjectVersion?: string | undefined;
+    /**
+     * If you input your canary script directly into the canary instead of referring to an S3 location, the value of this parameter is the script in plain text. It can be up to 5 MB.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-synthetics-canary-code.html#cfn-synthetics-canary-code-script}
+     */
+    Script?: string | undefined;
+} | {
+    /**
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-synthetics-canary-code.html#cfn-synthetics-canary-code-blueprinttypes}
+     */
+    BlueprintTypes?: string[] | undefined;
     /**
      * List of Lambda layers to attach to the canary
      * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-synthetics-canary-code.html#cfn-synthetics-canary-code-dependencies}
@@ -280,6 +323,41 @@ export type Code = {
      * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-synthetics-canary-code.html#cfn-synthetics-canary-code-script}
      */
     Script: string;
+} | {
+    /**
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-synthetics-canary-code.html#cfn-synthetics-canary-code-blueprinttypes}
+     */
+    BlueprintTypes: string[];
+    /**
+     * List of Lambda layers to attach to the canary
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-synthetics-canary-code.html#cfn-synthetics-canary-code-dependencies}
+     */
+    Dependencies?: Dependency[] | undefined;
+    /**
+     * The entry point to use for the source code when running the canary. For canaries that use the `syn-python-selenium-1.0` runtime or a `syn-nodejs.puppeteer` runtime earlier than `syn-nodejs.puppeteer-3.4` , the handler must be specified as `*fileName* .handler` . For `syn-python-selenium-1.1` , `syn-nodejs.puppeteer-3.4` , and later runtimes, the handler can be specified as `*fileName* . *functionName*` , or you can specify a folder where canary scripts reside as `*folder* / *fileName* . *functionName*` .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-synthetics-canary-code.html#cfn-synthetics-canary-code-handler}
+     */
+    Handler?: string | undefined;
+    /**
+     * If your canary script is located in S3, specify the bucket name here. The bucket must already exist.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-synthetics-canary-code.html#cfn-synthetics-canary-code-s3bucket}
+     */
+    S3Bucket?: string | undefined;
+    /**
+     * The Amazon S3 key of your script. For more information, see [Working with Amazon S3 Objects](https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingObjects.html) .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-synthetics-canary-code.html#cfn-synthetics-canary-code-s3key}
+     */
+    S3Key?: string | undefined;
+    /**
+     * The Amazon S3 version ID of your script.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-synthetics-canary-code.html#cfn-synthetics-canary-code-s3objectversion}
+     */
+    S3ObjectVersion?: string | undefined;
+    /**
+     * If you input your canary script directly into the canary instead of referring to an S3 location, the value of this parameter is the script in plain text. It can be up to 5 MB.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-synthetics-canary-code.html#cfn-synthetics-canary-code-script}
+     */
+    Script: string;
 };
 /**
  * A structure that contains information about a dependency for a canary.

package/out/exports/resources.generated/aws-transfer-connector.d.ts

@@ -133,6 +133,8 @@ export type TransferConnectorProps = {
     Tags?: Tag[] | undefined;
     /**
      * The URL of the partner's AS2 or SFTP endpoint.
+     *
+     * When creating AS2 connectors or service-managed SFTP connectors (connectors without egress configuration), you must provide a URL to specify the remote server endpoint. For VPC Lattice type connectors, the URL must be null.
      * @maxLength 255
      * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-transfer-connector.html#cfn-transfer-connector-url}
      */

package/out/exports/resources.generated/aws-transfer-server.d.ts

@@ -361,6 +361,8 @@ export type Protocol = "SFTP" | "FTP" | "FTPS" | "AS2";
 /**
  * The protocol settings that are configured for your server.
  *
+ * > Avoid placing Network Load Balancers (NLBs) or NAT gateways in front of AWS Transfer Family servers, as this increases costs and can cause performance issues, including reduced connection limits for FTPS. For more details, see [Avoid placing NLBs and NATs in front of AWS Transfer Family](https://docs.aws.amazon.com/transfer/latest/userguide/infrastructure-security.html#nlb-considerations) .
+ *
  * - To indicate passive mode (for FTP and FTPS protocols), use the `PassiveIp` parameter. Enter a single dotted-quad IPv4 address, such as the external IP address of a firewall, router, or load balancer.
  * - To ignore the error that is generated when the client attempts to use the `SETSTAT` command on a file that you are uploading to an Amazon S3 bucket, use the `SetStatOption` parameter. To have the AWS Transfer Family server ignore the `SETSTAT` command and upload files without needing to make any changes to your SFTP client, set the value to `ENABLE_NO_OP` . If you set the `SetStatOption` parameter to `ENABLE_NO_OP` , Transfer Family generates a log entry to Amazon CloudWatch Logs, so that you can determine when the client is making a `SETSTAT` call.
  * - To determine whether your AWS Transfer Family server resumes recent, negotiated sessions through a unique session ID, use the `TlsSessionResumptionMode` parameter.
@@ -381,6 +383,8 @@ export type ProtocolDetails = {
      * Replace `0.0.0.0` in the example above with the actual IP address you want to use.
      *
      * > If you change the `PassiveIp` value, you must stop and then restart your Transfer Family server for the change to take effect. For details on using passive mode (PASV) in a NAT environment, see [Configuring your FTPS server behind a firewall or NAT with AWS Transfer Family](https://docs.aws.amazon.com/storage/configuring-your-ftps-server-behind-a-firewall-or-nat-with-aws-transfer-family/) .
+     * >
+     * > Additionally, avoid placing Network Load Balancers (NLBs) or NAT gateways in front of AWS Transfer Family servers. This configuration increases costs and can cause performance issues. When NLBs or NATs are in the communication path, Transfer Family cannot accurately recognize client IP addresses, which impacts connection sharding and limits FTPS servers to only 300 simultaneous connections instead of 10,000. If you must use an NLB, use port 21 for health checks and enable TLS session resumption by setting `TlsSessionResumptionMode = ENFORCED` . For optimal performance, migrate to VPC endpoints with Elastic IP addresses instead of using NLBs. For more details, see [Avoid placing NLBs and NATs in front of AWS Transfer Family](https://docs.aws.amazon.com/transfer/latest/userguide/infrastructure-security.html#nlb-considerations) .
      *
      * *Special values*
      *

package/out/exports/resources.generated/aws-vpclattice-resourcegateway.d.ts

@@ -15,7 +15,7 @@ export type VpcLatticeResourceGatewayProps = {
      */
     IpAddressType?: "IPV4" | "IPV6" | "DUALSTACK" | undefined;
     /**
-     * The number of IPv4 addresses to allocate per ENI for the resource gateway
+     * The number of IPv4 addresses in each ENI for the resource gateway.
      * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-vpclattice-resourcegateway.html#cfn-vpclattice-resourcegateway-ipv4addressespereni}
      */
     Ipv4AddressesPerEni?: number | undefined;

package/out/exports/resources.generated/aws-wisdom-aiprompt.d.ts

@@ -127,7 +127,7 @@ export type AIPromptTemplateType = "TEXT";
 /**
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-wisdom-aiprompt-aiprompttype.html}
  */
-export type AIPromptType = "ANSWER_GENERATION" | "INTENT_LABELING_GENERATION" | "QUERY_REFORMULATION" | "SELF_SERVICE_PRE_PROCESSING" | "SELF_SERVICE_ANSWER_GENERATION";
+export type AIPromptType = "ANSWER_GENERATION" | "INTENT_LABELING_GENERATION" | "QUERY_REFORMULATION" | "SELF_SERVICE_PRE_PROCESSING" | "SELF_SERVICE_ANSWER_GENERATION" | "EMAIL_RESPONSE" | "EMAIL_OVERVIEW" | "EMAIL_GENERATIVE_ANSWER" | "EMAIL_QUERY_REFORMULATION";
 /**
  * The configuration for a prompt template that supports full textual prompt configuration using a YAML prompt.
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-wisdom-aiprompt-textfullaipromptedittemplateconfiguration.html}

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@propulsionworks/cloudformation",
-  "version": "0.1.30",
+  "version": "0.1.31",
   "author": {
     "name": "Gordon Leigh"
   },