@propulsionworks/cloudformation 0.1.0 → 0.1.2

package/out/exports/resources.generated/aws-waf-ipset.d.ts

@@ -1,4 +1,16 @@
 import type { ResourceDefinitionWithAttributes } from "../main.ts";
+/**
+ * > AWS WAF Classic support will end on September 30, 2025.
+ * >
+ * > This is *AWS WAF Classic* documentation. For more information, see [AWS WAF Classic](https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html) in the developer guide.
+ * >
+ * > *For the latest version of AWS WAF* , use the AWS WAF V2 API and see the [AWS WAF Developer Guide](https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html) . With the latest version, AWS WAF has a single set of endpoints for regional and global use.
+ *
+ * Contains one or more IP addresses or blocks of IP addresses specified in Classless Inter-Domain Routing (CIDR) notation. AWS WAF supports IPv4 address ranges: /8 and any range between /16 through /32. AWS WAF supports IPv6 address ranges: /24, /32, /48, /56, /64, and /128.
+ *
+ * To specify an individual IP address, you specify the four-part IP address followed by a `/32` , for example, 192.0.2.0/32. To block a range of IP addresses, you can specify /8 or any range between /16 through /32 (for IPv4) or /24, /32, /48, /56, /64, or /128 (for IPv6). For more information about CIDR notation, see the Wikipedia entry [Classless Inter-Domain Routing](https://docs.aws.amazon.com/https://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing) .
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-ipset.html}
+ */
 export type WAFIPSet = ResourceDefinitionWithAttributes<"AWS::WAF::IPSet", WAFIPSetProps, WAFIPSetAttribs>;
 /**
  * > AWS WAF Classic support will end on September 30, 2025.
@@ -10,18 +22,27 @@ export type WAFIPSet = ResourceDefinitionWithAttributes<"AWS::WAF::IPSet", WAFIP
  * Contains one or more IP addresses or blocks of IP addresses specified in Classless Inter-Domain Routing (CIDR) notation. AWS WAF supports IPv4 address ranges: /8 and any range between /16 through /32. AWS WAF supports IPv6 address ranges: /24, /32, /48, /56, /64, and /128.
  *
  * To specify an individual IP address, you specify the four-part IP address followed by a `/32` , for example, 192.0.2.0/32. To block a range of IP addresses, you can specify /8 or any range between /16 through /32 (for IPv4) or /24, /32, /48, /56, /64, or /128 (for IPv6). For more information about CIDR notation, see the Wikipedia entry [Classless Inter-Domain Routing](https://docs.aws.amazon.com/https://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing) .
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-ipset.html}
  */
 export type WAFIPSetProps = {
     /**
      * The IP address type ( `IPV4` or `IPV6` ) and the IP address range (in CIDR notation) that web requests originate from. If the `WebACL` is associated with an Amazon CloudFront distribution and the viewer did not use an HTTP proxy or a load balancer to send the request, this is the value of the c-ip field in the CloudFront access logs.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-ipset.html#cfn-waf-ipset-ipsetdescriptors}
      */
     IPSetDescriptors?: IPSetDescriptor[] | undefined;
     /**
      * The name of the `IPSet` . You can't change the name of an `IPSet` after you create it.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-ipset.html#cfn-waf-ipset-name}
      */
     Name: string;
 };
+/**
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-ipset.html#aws-resource-waf-ipset-return-values}
+ */
 export type WAFIPSetAttribs = {
+    /**
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-ipset.html#cfn-waf-ipset-id}
+     */
     Id: string;
 };
 /**
@@ -32,10 +53,12 @@ export type WAFIPSetAttribs = {
  * > *For the latest version of AWS WAF* , use the AWS WAF V2 API and see the [AWS WAF Developer Guide](https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html) . With the latest version, AWS WAF has a single set of endpoints for regional and global use.
  *
  * Specifies the IP address type ( `IPV4` or `IPV6` ) and the IP address range (in CIDR format) that web requests originate from.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-ipset-ipsetdescriptor.html}
  */
 export type IPSetDescriptor = {
     /**
      * Specify `IPV4` or `IPV6` .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-ipset-ipsetdescriptor.html#cfn-waf-ipset-ipsetdescriptor-type}
      */
     Type: string;
     /**
@@ -50,6 +73,7 @@ export type IPSetDescriptor = {
      *
      * - To configure AWS WAF to allow, block, or count requests that originated from the IP address 1111:0000:0000:0000:0000:0000:0000:0111, specify `1111:0000:0000:0000:0000:0000:0000:0111/128` .
      * - To configure AWS WAF to allow, block, or count requests that originated from IP addresses 1111:0000:0000:0000:0000:0000:0000:0000 to 1111:0000:0000:0000:ffff:ffff:ffff:ffff, specify `1111:0000:0000:0000:0000:0000:0000:0000/64` .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-ipset-ipsetdescriptor.html#cfn-waf-ipset-ipsetdescriptor-value}
      */
     Value: string;
 };

package/out/exports/resources.generated/aws-waf-rule.d.ts

@@ -1,4 +1,17 @@
 import type { ResourceDefinitionWithAttributes } from "../main.ts";
+/**
+ * > This is *AWS WAF Classic* documentation. For more information, see [AWS WAF Classic](https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html) in the developer guide.
+ * >
+ * > *For the latest version of AWS WAF* , use the AWS WAF V2 API and see the [AWS WAF Developer Guide](https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html) . With the latest version, AWS WAF has a single set of endpoints for regional and global use.
+ *
+ * A combination of `ByteMatchSet` , `IPSet` , and/or `SqlInjectionMatchSet` objects that identify the web requests that you want to allow, block, or count. For example, you might create a `Rule` that includes the following predicates:
+ *
+ * - An `IPSet` that causes AWS WAF to search for web requests that originate from the IP address `192.0.2.44`
+ * - A `ByteMatchSet` that causes AWS WAF to search for web requests for which the value of the `User-Agent` header is `BadBot` .
+ *
+ * To match the settings in this `Rule` , a request must originate from `192.0.2.44` AND include a `User-Agent` header for which the value is `BadBot` .
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-rule.html}
+ */
 export type WAFRule = ResourceDefinitionWithAttributes<"AWS::WAF::Rule", WAFRuleProps, WAFRuleAttribs>;
 /**
  * > This is *AWS WAF Classic* documentation. For more information, see [AWS WAF Classic](https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html) in the developer guide.
@@ -11,40 +24,54 @@ export type WAFRule = ResourceDefinitionWithAttributes<"AWS::WAF::Rule", WAFRule
  * - A `ByteMatchSet` that causes AWS WAF to search for web requests for which the value of the `User-Agent` header is `BadBot` .
  *
  * To match the settings in this `Rule` , a request must originate from `192.0.2.44` AND include a `User-Agent` header for which the value is `BadBot` .
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-rule.html}
  */
 export type WAFRuleProps = {
     /**
      * The name of the metrics for this `Rule` . The name can contain only alphanumeric characters (A-Z, a-z, 0-9), with maximum length 128 and minimum length one. It can't contain whitespace or metric names reserved for AWS WAF , including "All" and "Default_Action." You can't change `MetricName` after you create the `Rule` .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-rule.html#cfn-waf-rule-metricname}
      */
     MetricName: string;
     /**
      * The friendly name or description for the `Rule` . You can't change the name of a `Rule` after you create it.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-rule.html#cfn-waf-rule-name}
      */
     Name: string;
     /**
      * The `Predicates` object contains one `Predicate` element for each `ByteMatchSet` , `IPSet` , or `SqlInjectionMatchSet` object that you want to include in a `Rule` .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-rule.html#cfn-waf-rule-predicates}
      */
     Predicates?: Predicate[] | undefined;
 };
+/**
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-rule.html#aws-resource-waf-rule-return-values}
+ */
 export type WAFRuleAttribs = {
+    /**
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-rule.html#cfn-waf-rule-id}
+     */
     Id: string;
 };
 /**
  * Specifies the `ByteMatchSet` , `IPSet` , `SqlInjectionMatchSet` , `XssMatchSet` , `RegexMatchSet` , `GeoMatchSet` , and `SizeConstraintSet` objects that you want to add to a `Rule` and, for each object, indicates whether you want to negate the settings, for example, requests that do NOT originate from the IP address 192.0.2.44.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-rule-predicate.html}
  */
 export type Predicate = {
     /**
      * A unique identifier for a predicate in a `Rule` , such as `ByteMatchSetId` or `IPSetId` . The ID is returned by the corresponding `Create` or `List` command.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-rule-predicate.html#cfn-waf-rule-predicate-dataid}
      */
     DataId: string;
     /**
      * Set `Negated` to `False` if you want AWS WAF to allow, block, or count requests based on the settings in the specified `ByteMatchSet` , `IPSet` , `SqlInjectionMatchSet` , `XssMatchSet` , `RegexMatchSet` , `GeoMatchSet` , or `SizeConstraintSet` . For example, if an `IPSet` includes the IP address `192.0.2.44` , AWS WAF will allow or block requests based on that IP address.
      *
      * Set `Negated` to `True` if you want AWS WAF to allow or block a request based on the negation of the settings in the `ByteMatchSet` , `IPSet` , `SqlInjectionMatchSet` , `XssMatchSet` , `RegexMatchSet` , `GeoMatchSet` , or `SizeConstraintSet` . For example, if an `IPSet` includes the IP address `192.0.2.44` , AWS WAF will allow, block, or count requests based on all IP addresses *except* `192.0.2.44` .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-rule-predicate.html#cfn-waf-rule-predicate-negated}
      */
     Negated: boolean;
     /**
      * The type of predicate in a `Rule` , such as `ByteMatch` or `IPSet` .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-rule-predicate.html#cfn-waf-rule-predicate-type}
      */
     Type: string;
 };

package/out/exports/resources.generated/aws-waf-sizeconstraintset.d.ts

@@ -1,4 +1,14 @@
 import type { ResourceDefinitionWithAttributes } from "../main.ts";
+/**
+ * > AWS WAF Classic support will end on September 30, 2025.
+ * >
+ * > This is *AWS WAF Classic* documentation. For more information, see [AWS WAF Classic](https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html) in the developer guide.
+ * >
+ * > *For the latest version of AWS WAF* , use the AWS WAF V2 API and see the [AWS WAF Developer Guide](https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html) . With the latest version, AWS WAF has a single set of endpoints for regional and global use.
+ *
+ * A complex type that contains `SizeConstraint` objects, which specify the parts of web requests that you want AWS WAF to inspect the size of. If a `SizeConstraintSet` contains more than one `SizeConstraint` object, a request only needs to match one constraint to be considered a match.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-sizeconstraintset.html}
+ */
 export type WAFSizeConstraintSet = ResourceDefinitionWithAttributes<"AWS::WAF::SizeConstraintSet", WAFSizeConstraintSetProps, WAFSizeConstraintSetAttribs>;
 /**
  * > AWS WAF Classic support will end on September 30, 2025.
@@ -8,22 +18,32 @@ export type WAFSizeConstraintSet = ResourceDefinitionWithAttributes<"AWS::WAF::S
  * > *For the latest version of AWS WAF* , use the AWS WAF V2 API and see the [AWS WAF Developer Guide](https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html) . With the latest version, AWS WAF has a single set of endpoints for regional and global use.
  *
  * A complex type that contains `SizeConstraint` objects, which specify the parts of web requests that you want AWS WAF to inspect the size of. If a `SizeConstraintSet` contains more than one `SizeConstraint` object, a request only needs to match one constraint to be considered a match.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-sizeconstraintset.html}
  */
 export type WAFSizeConstraintSetProps = {
     /**
      * The name, if any, of the `SizeConstraintSet` .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-sizeconstraintset.html#cfn-waf-sizeconstraintset-name}
      */
     Name: string;
     /**
      * The size constraint and the part of the web request to check.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-sizeconstraintset.html#cfn-waf-sizeconstraintset-sizeconstraints}
      */
     SizeConstraints: SizeConstraint[];
 };
+/**
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-sizeconstraintset.html#aws-resource-waf-sizeconstraintset-return-values}
+ */
 export type WAFSizeConstraintSetAttribs = {
+    /**
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-sizeconstraintset.html#cfn-waf-sizeconstraintset-id}
+     */
     Id: string;
 };
 /**
  * The part of a web request that you want to inspect, such as a specified header or a query string.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-sizeconstraintset-fieldtomatch.html}
  */
 export type FieldToMatch = {
     /**
@@ -32,6 +52,7 @@ export type FieldToMatch = {
      * When the value of `Type` is `SINGLE_QUERY_ARG` , enter the name of the parameter that you want AWS WAF to search, for example, `UserName` or `SalesRegion` . The parameter name is not case sensitive.
      *
      * If the value of `Type` is any other value, omit `Data` .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-sizeconstraintset-fieldtomatch.html#cfn-waf-sizeconstraintset-fieldtomatch-data}
      */
     Data?: string | undefined;
     /**
@@ -44,6 +65,7 @@ export type FieldToMatch = {
      * - `BODY` : The part of a request that contains any additional data that you want to send to your web server as the HTTP request body, such as data from a form. The request body immediately follows the request headers. Note that only the first `8192` bytes of the request body are forwarded to AWS WAF for inspection. To allow or block requests based on the length of the body, you can create a size constraint set.
      * - `SINGLE_QUERY_ARG` : The parameter in the query string that you will inspect, such as *UserName* or *SalesRegion* . The maximum length for `SINGLE_QUERY_ARG` is 30 characters.
      * - `ALL_QUERY_ARGS` : Similar to `SINGLE_QUERY_ARG` , but rather than inspecting a single parameter, AWS WAF will inspect all parameters within the query for the value or regex pattern that you specify in `TargetString` .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-sizeconstraintset-fieldtomatch.html#cfn-waf-sizeconstraintset-fieldtomatch-type}
      */
     Type: string;
 };
@@ -55,6 +77,7 @@ export type FieldToMatch = {
  * > *For the latest version of AWS WAF* , use the AWS WAF V2 API and see the [AWS WAF Developer Guide](https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html) . With the latest version, AWS WAF has a single set of endpoints for regional and global use.
  *
  * Specifies a constraint on the size of a part of the web request. AWS WAF uses the `Size` , `ComparisonOperator` , and `FieldToMatch` to build an expression in the form of " `Size` `ComparisonOperator` size in bytes of `FieldToMatch` ". If that expression is true, the `SizeConstraint` is considered to match.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-sizeconstraintset-sizeconstraint.html}
  */
 export type SizeConstraint = {
     /**
@@ -71,10 +94,12 @@ export type SizeConstraint = {
      * *GE* : Used to test if the `Size` is greater than or equal to the size of the `FieldToMatch`
      *
      * *GT* : Used to test if the `Size` is strictly greater than the size of the `FieldToMatch`
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-sizeconstraintset-sizeconstraint.html#cfn-waf-sizeconstraintset-sizeconstraint-comparisonoperator}
      */
     ComparisonOperator: string;
     /**
      * The part of a web request that you want to inspect, such as a specified header or a query string.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-sizeconstraintset-sizeconstraint.html#cfn-waf-sizeconstraintset-sizeconstraint-fieldtomatch}
      */
     FieldToMatch: FieldToMatch;
     /**
@@ -83,6 +108,7 @@ export type SizeConstraint = {
      * Valid values for size are 0 - 21474836480 bytes (0 - 20 GB).
      *
      * If you specify `URI` for the value of `Type` , the / in the URI path that you specify counts as one character. For example, the URI `/logo.jpg` is nine characters long.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-sizeconstraintset-sizeconstraint.html#cfn-waf-sizeconstraintset-sizeconstraint-size}
      */
     Size: number;
     /**
@@ -137,6 +163,7 @@ export type SizeConstraint = {
      * *URL_DECODE*
      *
      * Use this option to decode a URL-encoded value.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-sizeconstraintset-sizeconstraint.html#cfn-waf-sizeconstraintset-sizeconstraint-texttransformation}
      */
     TextTransformation: string;
 };

package/out/exports/resources.generated/aws-waf-sqlinjectionmatchset.d.ts

@@ -1,4 +1,14 @@
 import type { ResourceDefinitionWithAttributes } from "../main.ts";
+/**
+ * > AWS WAF Classic support will end on September 30, 2025.
+ * >
+ * > This is *AWS WAF Classic* documentation. For more information, see [AWS WAF Classic](https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html) in the developer guide.
+ * >
+ * > *For the latest version of AWS WAF* , use the AWS WAF V2 API and see the [AWS WAF Developer Guide](https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html) . With the latest version, AWS WAF has a single set of endpoints for regional and global use.
+ *
+ * A complex type that contains `SqlInjectionMatchTuple` objects, which specify the parts of web requests that you want AWS WAF to inspect for snippets of malicious SQL code and, if you want AWS WAF to inspect a header, the name of the header. If a `SqlInjectionMatchSet` contains more than one `SqlInjectionMatchTuple` object, a request needs to include snippets of SQL code in only one of the specified parts of the request to be considered a match.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-sqlinjectionmatchset.html}
+ */
 export type WAFSqlInjectionMatchSet = ResourceDefinitionWithAttributes<"AWS::WAF::SqlInjectionMatchSet", WAFSqlInjectionMatchSetProps, WAFSqlInjectionMatchSetAttribs>;
 /**
  * > AWS WAF Classic support will end on September 30, 2025.
@@ -8,22 +18,32 @@ export type WAFSqlInjectionMatchSet = ResourceDefinitionWithAttributes<"AWS::WAF
  * > *For the latest version of AWS WAF* , use the AWS WAF V2 API and see the [AWS WAF Developer Guide](https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html) . With the latest version, AWS WAF has a single set of endpoints for regional and global use.
  *
  * A complex type that contains `SqlInjectionMatchTuple` objects, which specify the parts of web requests that you want AWS WAF to inspect for snippets of malicious SQL code and, if you want AWS WAF to inspect a header, the name of the header. If a `SqlInjectionMatchSet` contains more than one `SqlInjectionMatchTuple` object, a request needs to include snippets of SQL code in only one of the specified parts of the request to be considered a match.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-sqlinjectionmatchset.html}
  */
 export type WAFSqlInjectionMatchSetProps = {
     /**
      * The name, if any, of the `SqlInjectionMatchSet` .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-sqlinjectionmatchset.html#cfn-waf-sqlinjectionmatchset-name}
      */
     Name: string;
     /**
      * Specifies the parts of web requests that you want to inspect for snippets of malicious SQL code.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-sqlinjectionmatchset.html#cfn-waf-sqlinjectionmatchset-sqlinjectionmatchtuples}
      */
     SqlInjectionMatchTuples?: SqlInjectionMatchTuple[] | undefined;
 };
+/**
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-sqlinjectionmatchset.html#aws-resource-waf-sqlinjectionmatchset-return-values}
+ */
 export type WAFSqlInjectionMatchSetAttribs = {
+    /**
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-sqlinjectionmatchset.html#cfn-waf-sqlinjectionmatchset-id}
+     */
     Id: string;
 };
 /**
  * The part of a web request that you want to inspect, such as a specified header or a query string.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-sqlinjectionmatchset-fieldtomatch.html}
  */
 export type FieldToMatch = {
     /**
@@ -32,6 +52,7 @@ export type FieldToMatch = {
      * When the value of `Type` is `SINGLE_QUERY_ARG` , enter the name of the parameter that you want AWS WAF to search, for example, `UserName` or `SalesRegion` . The parameter name is not case sensitive.
      *
      * If the value of `Type` is any other value, omit `Data` .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-sqlinjectionmatchset-fieldtomatch.html#cfn-waf-sqlinjectionmatchset-fieldtomatch-data}
      */
     Data?: string | undefined;
     /**
@@ -44,6 +65,7 @@ export type FieldToMatch = {
      * - `BODY` : The part of a request that contains any additional data that you want to send to your web server as the HTTP request body, such as data from a form. The request body immediately follows the request headers. Note that only the first `8192` bytes of the request body are forwarded to AWS WAF for inspection. To allow or block requests based on the length of the body, you can create a size constraint set.
      * - `SINGLE_QUERY_ARG` : The parameter in the query string that you will inspect, such as *UserName* or *SalesRegion* . The maximum length for `SINGLE_QUERY_ARG` is 30 characters.
      * - `ALL_QUERY_ARGS` : Similar to `SINGLE_QUERY_ARG` , but rather than inspecting a single parameter, AWS WAF will inspect all parameters within the query for the value or regex pattern that you specify in `TargetString` .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-sqlinjectionmatchset-fieldtomatch.html#cfn-waf-sqlinjectionmatchset-fieldtomatch-type}
      */
     Type: string;
 };
@@ -55,10 +77,12 @@ export type FieldToMatch = {
  * > *For the latest version of AWS WAF* , use the AWS WAF V2 API and see the [AWS WAF Developer Guide](https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html) . With the latest version, AWS WAF has a single set of endpoints for regional and global use.
  *
  * Specifies the part of a web request that you want AWS WAF to inspect for snippets of malicious SQL code and, if you want AWS WAF to inspect a header, the name of the header.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-sqlinjectionmatchset-sqlinjectionmatchtuple.html}
  */
 export type SqlInjectionMatchTuple = {
     /**
      * The part of a web request that you want to inspect, such as a specified header or a query string.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-sqlinjectionmatchset-sqlinjectionmatchtuple.html#cfn-waf-sqlinjectionmatchset-sqlinjectionmatchtuple-fieldtomatch}
      */
     FieldToMatch: FieldToMatch;
     /**
@@ -111,6 +135,7 @@ export type SqlInjectionMatchTuple = {
      * *NONE*
      *
      * Specify `NONE` if you don't want to perform any text transformations.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-sqlinjectionmatchset-sqlinjectionmatchtuple.html#cfn-waf-sqlinjectionmatchset-sqlinjectionmatchtuple-texttransformation}
      */
     TextTransformation: string;
 };

package/out/exports/resources.generated/aws-waf-webacl.d.ts

@@ -1,4 +1,12 @@
 import type { ResourceDefinitionWithAttributes } from "../main.ts";
+/**
+ * > This is *AWS WAF Classic* documentation. For more information, see [AWS WAF Classic](https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html) in the developer guide.
+ * >
+ * > *For the latest version of AWS WAF* , use the AWS WAF V2 API and see the [AWS WAF Developer Guide](https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html) . With the latest version, AWS WAF has a single set of endpoints for regional and global use.
+ *
+ * Contains the `Rules` that identify the requests that you want to allow, block, or count. In a `WebACL` , you also specify a default action ( `ALLOW` or `BLOCK` ), and the action for each `Rule` that you add to a `WebACL` , for example, block requests from specified IP addresses or block requests from specified referrers. You also associate the `WebACL` with a Amazon CloudFront distribution to identify the requests that you want AWS WAF to filter. If you add more than one `Rule` to a `WebACL` , a request needs to match only one of the specifications to be allowed, blocked, or counted.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-webacl.html}
+ */
 export type WAFWebACL = ResourceDefinitionWithAttributes<"AWS::WAF::WebACL", WAFWebACLProps, WAFWebACLAttribs>;
 /**
  * > This is *AWS WAF Classic* documentation. For more information, see [AWS WAF Classic](https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html) in the developer guide.
@@ -6,32 +14,44 @@ export type WAFWebACL = ResourceDefinitionWithAttributes<"AWS::WAF::WebACL", WAF
  * > *For the latest version of AWS WAF* , use the AWS WAF V2 API and see the [AWS WAF Developer Guide](https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html) . With the latest version, AWS WAF has a single set of endpoints for regional and global use.
  *
  * Contains the `Rules` that identify the requests that you want to allow, block, or count. In a `WebACL` , you also specify a default action ( `ALLOW` or `BLOCK` ), and the action for each `Rule` that you add to a `WebACL` , for example, block requests from specified IP addresses or block requests from specified referrers. You also associate the `WebACL` with a Amazon CloudFront distribution to identify the requests that you want AWS WAF to filter. If you add more than one `Rule` to a `WebACL` , a request needs to match only one of the specifications to be allowed, blocked, or counted.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-webacl.html}
  */
 export type WAFWebACLProps = {
     /**
      * The action to perform if none of the `Rules` contained in the `WebACL` match. The action is specified by the `WafAction` object.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-webacl.html#cfn-waf-webacl-defaultaction}
      */
     DefaultAction: WafAction;
     /**
      * The name of the metrics for this `WebACL` . The name can contain only alphanumeric characters (A-Z, a-z, 0-9), with maximum length 128 and minimum length one. It can't contain whitespace or metric names reserved for AWS WAF , including "All" and "Default_Action." You can't change `MetricName` after you create the `WebACL` .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-webacl.html#cfn-waf-webacl-metricname}
      */
     MetricName: string;
     /**
      * A friendly name or description of the `WebACL` . You can't change the name of a `WebACL` after you create it.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-webacl.html#cfn-waf-webacl-name}
      */
     Name: string;
     /**
      * An array that contains the action for each `Rule` in a `WebACL` , the priority of the `Rule` , and the ID of the `Rule` .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-webacl.html#cfn-waf-webacl-rules}
      */
     Rules?: ActivatedRule[] | undefined;
 };
+/**
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-webacl.html#aws-resource-waf-webacl-return-values}
+ */
 export type WAFWebACLAttribs = {
+    /**
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-webacl.html#cfn-waf-webacl-id}
+     */
     Id: string;
 };
 /**
  * The `ActivatedRule` object in an `UpdateWebACL` request specifies a `Rule` that you want to insert or delete, the priority of the `Rule` in the `WebACL` , and the action that you want AWS WAF to take when a web request matches the `Rule` ( `ALLOW` , `BLOCK` , or `COUNT` ).
  *
  * To specify whether to insert or delete a `Rule` , use the `Action` parameter in the `WebACLUpdate` data type.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-webacl-activatedrule.html}
  */
 export type ActivatedRule = {
     /**
@@ -42,16 +62,19 @@ export type ActivatedRule = {
      * - `COUNT` : AWS WAF increments a counter of requests that match the conditions in the rule and then continues to inspect the web request based on the remaining rules in the web ACL.
      *
      * `ActivatedRule|OverrideAction` applies only when updating or adding a `RuleGroup` to a `WebACL` . In this case, you do not use `ActivatedRule|Action` . For all other update requests, `ActivatedRule|Action` is used instead of `ActivatedRule|OverrideAction` .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-webacl-activatedrule.html#cfn-waf-webacl-activatedrule-action}
      */
     Action?: WafAction | undefined;
     /**
      * Specifies the order in which the `Rules` in a `WebACL` are evaluated. Rules with a lower value for `Priority` are evaluated before `Rules` with a higher value. The value must be a unique integer. If you add multiple `Rules` to a `WebACL` , the values don't need to be consecutive.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-webacl-activatedrule.html#cfn-waf-webacl-activatedrule-priority}
      */
     Priority: number;
     /**
      * The `RuleId` for a `Rule` . You use `RuleId` to get more information about a `Rule` , update a `Rule` , insert a `Rule` into a `WebACL` or delete a one from a `WebACL` , or delete a `Rule` from AWS WAF .
      *
      * `RuleId` is returned by `CreateRule` and by `ListRules` .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-webacl-activatedrule.html#cfn-waf-webacl-activatedrule-ruleid}
      */
     RuleId: string;
 };
@@ -63,6 +86,7 @@ export type ActivatedRule = {
  * > *For the latest version of AWS WAF* , use the AWS WAF V2 API and see the [AWS WAF Developer Guide](https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html) . With the latest version, AWS WAF has a single set of endpoints for regional and global use.
  *
  * For the action that is associated with a rule in a `WebACL` , specifies the action that you want AWS WAF to perform when a web request matches all of the conditions in a rule. For the default action in a `WebACL` , specifies the action that you want AWS WAF to take when a web request doesn't match all of the conditions in any of the rules in a `WebACL` .
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-webacl-wafaction.html}
  */
 export type WafAction = {
     /**
@@ -71,6 +95,7 @@ export type WafAction = {
      * - `ALLOW` : AWS WAF allows requests
      * - `BLOCK` : AWS WAF blocks requests
      * - `COUNT` : AWS WAF increments a counter of the requests that match all of the conditions in the rule. AWS WAF then continues to inspect the web request based on the remaining rules in the web ACL. You can't specify `COUNT` for the default action for a `WebACL` .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-webacl-wafaction.html#cfn-waf-webacl-wafaction-type}
      */
     Type: string;
 };

package/out/exports/resources.generated/aws-waf-xssmatchset.d.ts

@@ -1,4 +1,14 @@
 import type { ResourceDefinitionWithAttributes } from "../main.ts";
+/**
+ * > AWS WAF Classic support will end on September 30, 2025.
+ * >
+ * > This is *AWS WAF Classic* documentation. For more information, see [AWS WAF Classic](https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html) in the developer guide.
+ * >
+ * > *For the latest version of AWS WAF* , use the AWS WAF V2 API and see the [AWS WAF Developer Guide](https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html) . With the latest version, AWS WAF has a single set of endpoints for regional and global use.
+ *
+ * A complex type that contains `XssMatchTuple` objects, which specify the parts of web requests that you want AWS WAF to inspect for cross-site scripting attacks and, if you want AWS WAF to inspect a header, the name of the header. If a `XssMatchSet` contains more than one `XssMatchTuple` object, a request needs to include cross-site scripting attacks in only one of the specified parts of the request to be considered a match.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-xssmatchset.html}
+ */
 export type WAFXssMatchSet = ResourceDefinitionWithAttributes<"AWS::WAF::XssMatchSet", WAFXssMatchSetProps, WAFXssMatchSetAttribs>;
 /**
  * > AWS WAF Classic support will end on September 30, 2025.
@@ -8,22 +18,32 @@ export type WAFXssMatchSet = ResourceDefinitionWithAttributes<"AWS::WAF::XssMatc
  * > *For the latest version of AWS WAF* , use the AWS WAF V2 API and see the [AWS WAF Developer Guide](https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html) . With the latest version, AWS WAF has a single set of endpoints for regional and global use.
  *
  * A complex type that contains `XssMatchTuple` objects, which specify the parts of web requests that you want AWS WAF to inspect for cross-site scripting attacks and, if you want AWS WAF to inspect a header, the name of the header. If a `XssMatchSet` contains more than one `XssMatchTuple` object, a request needs to include cross-site scripting attacks in only one of the specified parts of the request to be considered a match.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-xssmatchset.html}
  */
 export type WAFXssMatchSetProps = {
     /**
      * The name, if any, of the `XssMatchSet` .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-xssmatchset.html#cfn-waf-xssmatchset-name}
      */
     Name: string;
     /**
      * Specifies the parts of web requests that you want to inspect for cross-site scripting attacks.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-xssmatchset.html#cfn-waf-xssmatchset-xssmatchtuples}
      */
     XssMatchTuples: XssMatchTuple[];
 };
+/**
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-xssmatchset.html#aws-resource-waf-xssmatchset-return-values}
+ */
 export type WAFXssMatchSetAttribs = {
+    /**
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-waf-xssmatchset.html#cfn-waf-xssmatchset-id}
+     */
     Id: string;
 };
 /**
  * The part of a web request that you want to inspect, such as a specified header or a query string.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-xssmatchset-fieldtomatch.html}
  */
 export type FieldToMatch = {
     /**
@@ -32,6 +52,7 @@ export type FieldToMatch = {
      * When the value of `Type` is `SINGLE_QUERY_ARG` , enter the name of the parameter that you want AWS WAF to search, for example, `UserName` or `SalesRegion` . The parameter name is not case sensitive.
      *
      * If the value of `Type` is any other value, omit `Data` .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-xssmatchset-fieldtomatch.html#cfn-waf-xssmatchset-fieldtomatch-data}
      */
     Data?: string | undefined;
     /**
@@ -44,6 +65,7 @@ export type FieldToMatch = {
      * - `BODY` : The part of a request that contains any additional data that you want to send to your web server as the HTTP request body, such as data from a form. The request body immediately follows the request headers. Note that only the first `8192` bytes of the request body are forwarded to AWS WAF for inspection. To allow or block requests based on the length of the body, you can create a size constraint set.
      * - `SINGLE_QUERY_ARG` : The parameter in the query string that you will inspect, such as *UserName* or *SalesRegion* . The maximum length for `SINGLE_QUERY_ARG` is 30 characters.
      * - `ALL_QUERY_ARGS` : Similar to `SINGLE_QUERY_ARG` , but rather than inspecting a single parameter, AWS WAF will inspect all parameters within the query for the value or regex pattern that you specify in `TargetString` .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-xssmatchset-fieldtomatch.html#cfn-waf-xssmatchset-fieldtomatch-type}
      */
     Type: string;
 };
@@ -55,10 +77,12 @@ export type FieldToMatch = {
  * > *For the latest version of AWS WAF* , use the AWS WAF V2 API and see the [AWS WAF Developer Guide](https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html) . With the latest version, AWS WAF has a single set of endpoints for regional and global use.
  *
  * Specifies the part of a web request that you want AWS WAF to inspect for cross-site scripting attacks and, if you want AWS WAF to inspect a header, the name of the header.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-xssmatchset-xssmatchtuple.html}
  */
 export type XssMatchTuple = {
     /**
      * The part of a web request that you want to inspect, such as a specified header or a query string.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-xssmatchset-xssmatchtuple.html#cfn-waf-xssmatchset-xssmatchtuple-fieldtomatch}
      */
     FieldToMatch: FieldToMatch;
     /**
@@ -111,6 +135,7 @@ export type XssMatchTuple = {
      * *NONE*
      *
      * Specify `NONE` if you don't want to perform any text transformations.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waf-xssmatchset-xssmatchtuple.html#cfn-waf-xssmatchset-xssmatchtuple-texttransformation}
      */
     TextTransformation: string;
 };

package/out/exports/resources.generated/aws-wafregional-bytematchset.d.ts

@@ -1,4 +1,12 @@
 import type { ResourceDefinitionWithAttributes } from "../main.ts";
+/**
+ * > This is *AWS WAF Classic* documentation. For more information, see [AWS WAF Classic](https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html) in the developer guide.
+ * >
+ * > *For the latest version of AWS WAF* , use the AWS WAF V2 API and see the [AWS WAF Developer Guide](https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html) . With the latest version, AWS WAF has a single set of endpoints for regional and global use.
+ *
+ * The `AWS::WAFRegional::ByteMatchSet` resource creates an AWS WAF `ByteMatchSet` that identifies a part of a web request that you want to inspect.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-wafregional-bytematchset.html}
+ */
 export type WAFRegionalByteMatchSet = ResourceDefinitionWithAttributes<"AWS::WAFRegional::ByteMatchSet", WAFRegionalByteMatchSetProps, WAFRegionalByteMatchSetAttribs>;
 /**
  * > This is *AWS WAF Classic* documentation. For more information, see [AWS WAF Classic](https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html) in the developer guide.
@@ -6,18 +14,27 @@ export type WAFRegionalByteMatchSet = ResourceDefinitionWithAttributes<"AWS::WAF
  * > *For the latest version of AWS WAF* , use the AWS WAF V2 API and see the [AWS WAF Developer Guide](https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html) . With the latest version, AWS WAF has a single set of endpoints for regional and global use.
  *
  * The `AWS::WAFRegional::ByteMatchSet` resource creates an AWS WAF `ByteMatchSet` that identifies a part of a web request that you want to inspect.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-wafregional-bytematchset.html}
  */
 export type WAFRegionalByteMatchSetProps = {
     /**
      * Specifies the bytes (typically a string that corresponds with ASCII characters) that you want AWS WAF to search for in web requests, the location in requests that you want AWS WAF to search, and other settings.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-wafregional-bytematchset.html#cfn-wafregional-bytematchset-bytematchtuples}
      */
     ByteMatchTuples?: ByteMatchTuple[] | undefined;
     /**
      * A friendly name or description of the `ByteMatchSet` . You can't change `Name` after you create a `ByteMatchSet` .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-wafregional-bytematchset.html#cfn-wafregional-bytematchset-name}
      */
     Name: string;
 };
+/**
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-wafregional-bytematchset.html#aws-resource-wafregional-bytematchset-return-values}
+ */
 export type WAFRegionalByteMatchSetAttribs = {
+    /**
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-wafregional-bytematchset.html#cfn-wafregional-bytematchset-id}
+     */
     Id: string;
 };
 /**
@@ -28,10 +45,12 @@ export type WAFRegionalByteMatchSetAttribs = {
  * > *For the latest version of AWS WAF* , use the AWS WAF V2 API and see the [AWS WAF Developer Guide](https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html) . With the latest version, AWS WAF has a single set of endpoints for regional and global use.
  *
  * The bytes (typically a string that corresponds with ASCII characters) that you want AWS WAF to search for in web requests, the location in requests that you want AWS WAF to search, and other settings.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-wafregional-bytematchset-bytematchtuple.html}
  */
 export type ByteMatchTuple = {
     /**
      * The part of a web request that you want AWS WAF to inspect, such as a specific header or a query string.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-wafregional-bytematchset-bytematchtuple.html#cfn-wafregional-bytematchset-bytematchtuple-fieldtomatch}
      */
     FieldToMatch: FieldToMatch;
     /**
@@ -61,6 +80,7 @@ export type ByteMatchTuple = {
      * *ENDS_WITH*
      *
      * The value of `TargetString` must appear at the end of the specified part of the web request.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-wafregional-bytematchset-bytematchtuple.html#cfn-wafregional-bytematchset-bytematchtuple-positionalconstraint}
      */
     PositionalConstraint: string;
     /**
@@ -79,6 +99,7 @@ export type ByteMatchTuple = {
      * - `ALL_QUERY_ARGS` : Similar to `SINGLE_QUERY_ARG` , but instead of inspecting a single parameter, AWS WAF inspects all parameters within the query string for the value or regex pattern that you specify in `TargetString` .
      *
      * If `TargetString` includes alphabetic characters A-Z and a-z, note that the value is case sensitive.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-wafregional-bytematchset-bytematchtuple.html#cfn-wafregional-bytematchset-bytematchtuple-targetstring}
      */
     TargetString?: string | undefined;
     /**
@@ -89,6 +110,7 @@ export type ByteMatchTuple = {
      * AWS WAF searches for this value in a specific part of web requests, which you define in the `FieldToMatch` property.
      *
      * Valid values depend on the Type value in the `FieldToMatch` property. For example, for a `METHOD` type, you must specify HTTP methods such as `DELETE, GET, HEAD, OPTIONS, PATCH, POST` , and `PUT` .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-wafregional-bytematchset-bytematchtuple.html#cfn-wafregional-bytematchset-bytematchtuple-targetstringbase64}
      */
     TargetStringBase64?: string | undefined;
     /**
@@ -141,6 +163,7 @@ export type ByteMatchTuple = {
      * *NONE*
      *
      * Specify `NONE` if you don't want to perform any text transformations.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-wafregional-bytematchset-bytematchtuple.html#cfn-wafregional-bytematchset-bytematchtuple-texttransformation}
      */
     TextTransformation: string;
 };
@@ -152,6 +175,7 @@ export type ByteMatchTuple = {
  * > *For the latest version of AWS WAF* , use the AWS WAF V2 API and see the [AWS WAF Developer Guide](https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html) . With the latest version, AWS WAF has a single set of endpoints for regional and global use.
  *
  * Specifies where in a web request to look for `TargetString` .
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-wafregional-bytematchset-fieldtomatch.html}
  */
 export type FieldToMatch = {
     /**
@@ -160,6 +184,7 @@ export type FieldToMatch = {
      * When the value of `Type` is `SINGLE_QUERY_ARG` , enter the name of the parameter that you want AWS WAF to search, for example, `UserName` or `SalesRegion` . The parameter name is not case sensitive.
      *
      * If the value of `Type` is any other value, omit `Data` .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-wafregional-bytematchset-fieldtomatch.html#cfn-wafregional-bytematchset-fieldtomatch-data}
      */
     Data?: string | undefined;
     /**
@@ -172,6 +197,7 @@ export type FieldToMatch = {
      * - `BODY` : The part of a request that contains any additional data that you want to send to your web server as the HTTP request body, such as data from a form. The request body immediately follows the request headers. Note that only the first `8192` bytes of the request body are forwarded to AWS WAF for inspection. To allow or block requests based on the length of the body, you can create a size constraint set.
      * - `SINGLE_QUERY_ARG` : The parameter in the query string that you will inspect, such as *UserName* or *SalesRegion* . The maximum length for `SINGLE_QUERY_ARG` is 30 characters.
      * - `ALL_QUERY_ARGS` : Similar to `SINGLE_QUERY_ARG` , but rather than inspecting a single parameter, AWS WAF will inspect all parameters within the query for the value or regex pattern that you specify in `TargetString` .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-wafregional-bytematchset-fieldtomatch.html#cfn-wafregional-bytematchset-fieldtomatch-type}
      */
     Type: string;
 };