@propulsionworks/cloudformation 0.0.2 → 0.1.1

package/out/exports/resources.generated/aws-eks-cluster.d.ts

@@ -0,0 +1,556 @@
+import type { ResourceDefinitionWithAttributes, Tag } from "../main.ts";
+/**
+ * Creates an Amazon EKS control plane.
+ *
+ * The Amazon EKS control plane consists of control plane instances that run the Kubernetes software, such as `etcd` and the API server. The control plane runs in an account managed by AWS , and the Kubernetes API is exposed by the Amazon EKS API server endpoint. Each Amazon EKS cluster control plane is single tenant and unique. It runs on its own set of Amazon EC2 instances.
+ *
+ * The cluster control plane is provisioned across multiple Availability Zones and fronted by an Elastic Load Balancing Network Load Balancer. Amazon EKS also provisions elastic network interfaces in your VPC subnets to provide connectivity from the control plane instances to the nodes (for example, to support `kubectl exec` , `logs` , and `proxy` data flows).
+ *
+ * Amazon EKS nodes run in your AWS account and connect to your cluster's control plane over the Kubernetes API server endpoint and a certificate file that is created for your cluster.
+ *
+ * You can use the `endpointPublicAccess` and `endpointPrivateAccess` parameters to enable or disable public and private access to your cluster's Kubernetes API server endpoint. By default, public access is enabled, and private access is disabled. For more information, see [Amazon EKS Cluster Endpoint Access Control](https://docs.aws.amazon.com/eks/latest/userguide/cluster-endpoint.html) in the **Amazon EKS User Guide** .
+ *
+ * You can use the `logging` parameter to enable or disable exporting the Kubernetes control plane logs for your cluster to CloudWatch Logs. By default, cluster control plane logs aren't exported to CloudWatch Logs. For more information, see [Amazon EKS Cluster Control Plane Logs](https://docs.aws.amazon.com/eks/latest/userguide/control-plane-logs.html) in the **Amazon EKS User Guide** .
+ *
+ * > CloudWatch Logs ingestion, archive storage, and data scanning rates apply to exported control plane logs. For more information, see [CloudWatch Pricing](https://docs.aws.amazon.com/cloudwatch/pricing/) .
+ *
+ * In most cases, it takes several minutes to create a cluster. After you create an Amazon EKS cluster, you must configure your Kubernetes tooling to communicate with the API server and launch nodes into your cluster. For more information, see [Allowing users to access your cluster](https://docs.aws.amazon.com/eks/latest/userguide/cluster-auth.html) and [Launching Amazon EKS nodes](https://docs.aws.amazon.com/eks/latest/userguide/launch-workers.html) in the *Amazon EKS User Guide* .
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eks-cluster.html}
+ */
+export type EKSCluster = ResourceDefinitionWithAttributes<"AWS::EKS::Cluster", EKSClusterProps, EKSClusterAttribs>;
+/**
+ * Creates an Amazon EKS control plane.
+ *
+ * The Amazon EKS control plane consists of control plane instances that run the Kubernetes software, such as `etcd` and the API server. The control plane runs in an account managed by AWS , and the Kubernetes API is exposed by the Amazon EKS API server endpoint. Each Amazon EKS cluster control plane is single tenant and unique. It runs on its own set of Amazon EC2 instances.
+ *
+ * The cluster control plane is provisioned across multiple Availability Zones and fronted by an Elastic Load Balancing Network Load Balancer. Amazon EKS also provisions elastic network interfaces in your VPC subnets to provide connectivity from the control plane instances to the nodes (for example, to support `kubectl exec` , `logs` , and `proxy` data flows).
+ *
+ * Amazon EKS nodes run in your AWS account and connect to your cluster's control plane over the Kubernetes API server endpoint and a certificate file that is created for your cluster.
+ *
+ * You can use the `endpointPublicAccess` and `endpointPrivateAccess` parameters to enable or disable public and private access to your cluster's Kubernetes API server endpoint. By default, public access is enabled, and private access is disabled. For more information, see [Amazon EKS Cluster Endpoint Access Control](https://docs.aws.amazon.com/eks/latest/userguide/cluster-endpoint.html) in the **Amazon EKS User Guide** .
+ *
+ * You can use the `logging` parameter to enable or disable exporting the Kubernetes control plane logs for your cluster to CloudWatch Logs. By default, cluster control plane logs aren't exported to CloudWatch Logs. For more information, see [Amazon EKS Cluster Control Plane Logs](https://docs.aws.amazon.com/eks/latest/userguide/control-plane-logs.html) in the **Amazon EKS User Guide** .
+ *
+ * > CloudWatch Logs ingestion, archive storage, and data scanning rates apply to exported control plane logs. For more information, see [CloudWatch Pricing](https://docs.aws.amazon.com/cloudwatch/pricing/) .
+ *
+ * In most cases, it takes several minutes to create a cluster. After you create an Amazon EKS cluster, you must configure your Kubernetes tooling to communicate with the API server and launch nodes into your cluster. For more information, see [Allowing users to access your cluster](https://docs.aws.amazon.com/eks/latest/userguide/cluster-auth.html) and [Launching Amazon EKS nodes](https://docs.aws.amazon.com/eks/latest/userguide/launch-workers.html) in the *Amazon EKS User Guide* .
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eks-cluster.html}
+ */
+export type EKSClusterProps = {
+    /**
+     * The access configuration for the cluster.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eks-cluster.html#cfn-eks-cluster-accessconfig}
+     */
+    AccessConfig?: AccessConfig | undefined;
+    /**
+     * If you set this value to `False` when creating a cluster, the default networking add-ons will not be installed.
+     *
+     * The default networking addons include vpc-cni, coredns, and kube-proxy.
+     *
+     * Use this option when you plan to install third-party alternative add-ons or self-manage the default networking add-ons.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eks-cluster.html#cfn-eks-cluster-bootstrapselfmanagedaddons}
+     */
+    BootstrapSelfManagedAddons?: boolean | undefined;
+    /**
+     * Indicates the current configuration of the compute capability on your EKS Auto Mode cluster. For example, if the capability is enabled or disabled. If the compute capability is enabled, EKS Auto Mode will create and delete EC2 Managed Instances in your AWS account. For more information, see EKS Auto Mode compute capability in the *Amazon EKS User Guide* .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eks-cluster.html#cfn-eks-cluster-computeconfig}
+     */
+    ComputeConfig?: ComputeConfig | undefined;
+    /**
+     * The encryption configuration for the cluster.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eks-cluster.html#cfn-eks-cluster-encryptionconfig}
+     */
+    EncryptionConfig?: EncryptionConfig[] | undefined;
+    /**
+     * Set this value to `true` to override upgrade-blocking readiness checks when updating a cluster.
+     * @default false
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eks-cluster.html#cfn-eks-cluster-force}
+     */
+    Force?: boolean | undefined;
+    /**
+     * The Kubernetes network configuration for the cluster.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eks-cluster.html#cfn-eks-cluster-kubernetesnetworkconfig}
+     */
+    KubernetesNetworkConfig?: KubernetesNetworkConfig | undefined;
+    /**
+     * The logging configuration for your cluster.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eks-cluster.html#cfn-eks-cluster-logging}
+     */
+    Logging?: Logging | undefined;
+    /**
+     * The unique name to give to your cluster. The name can contain only alphanumeric characters (case-sensitive) and hyphens. It must start with an alphanumeric character and can't be longer than 100 characters. The name must be unique within the AWS Region and AWS account that you're creating the cluster in. Note that underscores can't be used in AWS CloudFormation .
+     * @minLength 1
+     * @maxLength 100
+     * @pattern ^[0-9A-Za-z][A-Za-z0-9\-_]*
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eks-cluster.html#cfn-eks-cluster-name}
+     */
+    Name?: string | undefined;
+    /**
+     * An object representing the configuration of your local Amazon EKS cluster on an AWS Outpost. This object isn't available for clusters on the AWS cloud.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eks-cluster.html#cfn-eks-cluster-outpostconfig}
+     */
+    OutpostConfig?: OutpostConfig | undefined;
+    /**
+     * The configuration in the cluster for EKS Hybrid Nodes. You can add, change, or remove this configuration after the cluster is created.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eks-cluster.html#cfn-eks-cluster-remotenetworkconfig}
+     */
+    RemoteNetworkConfig?: RemoteNetworkConfig | undefined;
+    /**
+     * The VPC configuration that's used by the cluster control plane. Amazon EKS VPC resources have specific requirements to work properly with Kubernetes. For more information, see [Cluster VPC Considerations](https://docs.aws.amazon.com/eks/latest/userguide/network_reqs.html) and [Cluster Security Group Considerations](https://docs.aws.amazon.com/eks/latest/userguide/sec-group-reqs.html) in the *Amazon EKS User Guide* . You must specify at least two subnets. You can specify up to five security groups, but we recommend that you use a dedicated security group for your cluster control plane.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eks-cluster.html#cfn-eks-cluster-resourcesvpcconfig}
+     */
+    ResourcesVpcConfig: ResourcesVpcConfig;
+    /**
+     * The Amazon Resource Name (ARN) of the IAM role that provides permissions for the Kubernetes control plane to make calls to AWS API operations on your behalf. For more information, see [Amazon EKS Service IAM Role](https://docs.aws.amazon.com/eks/latest/userguide/service_IAM_role.html) in the **Amazon EKS User Guide** .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eks-cluster.html#cfn-eks-cluster-rolearn}
+     */
+    RoleArn: string;
+    /**
+     * Indicates the current configuration of the block storage capability on your EKS Auto Mode cluster. For example, if the capability is enabled or disabled. If the block storage capability is enabled, EKS Auto Mode will create and delete EBS volumes in your AWS account. For more information, see EKS Auto Mode block storage capability in the *Amazon EKS User Guide* .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eks-cluster.html#cfn-eks-cluster-storageconfig}
+     */
+    StorageConfig?: StorageConfig | undefined;
+    /**
+     * The metadata that you apply to the cluster to assist with categorization and organization. Each tag consists of a key and an optional value, both of which you define. Cluster tags don't propagate to any other resources associated with the cluster.
+     *
+     * > You must have the `eks:TagResource` and `eks:UntagResource` permissions for your [IAM principal](https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_terms-and-concepts.html) to manage the AWS CloudFormation stack. If you don't have these permissions, there might be unexpected behavior with stack-level tags propagating to the resource during resource creation and update.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eks-cluster.html#cfn-eks-cluster-tags}
+     */
+    Tags?: Tag[] | undefined;
+    /**
+     * This value indicates if extended support is enabled or disabled for the cluster.
+     *
+     * [Learn more about EKS Extended Support in the *Amazon EKS User Guide* .](https://docs.aws.amazon.com/eks/latest/userguide/extended-support-control.html)
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eks-cluster.html#cfn-eks-cluster-upgradepolicy}
+     */
+    UpgradePolicy?: UpgradePolicy | undefined;
+    /**
+     * The desired Kubernetes version for your cluster. If you don't specify a value here, the default version available in Amazon EKS is used.
+     *
+     * > The default version might not be the latest version available.
+     * @pattern 1\.\d\d
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eks-cluster.html#cfn-eks-cluster-version}
+     */
+    Version?: string | undefined;
+    /**
+     * The configuration for zonal shift for the cluster.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eks-cluster.html#cfn-eks-cluster-zonalshiftconfig}
+     */
+    ZonalShiftConfig?: ZonalShiftConfig | undefined;
+};
+/**
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eks-cluster.html#aws-resource-eks-cluster-return-values}
+ */
+export type EKSClusterAttribs = {
+    /**
+     * The ARN of the cluster, such as `arn:aws:eks:us-west-2:666666666666:cluster/prod` .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eks-cluster.html#cfn-eks-cluster-arn}
+     */
+    Arn: string;
+    /**
+     * The `certificate-authority-data` for your cluster.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eks-cluster.html#cfn-eks-cluster-certificateauthoritydata}
+     */
+    CertificateAuthorityData: string;
+    /**
+     * The cluster security group that was created by Amazon EKS for the cluster. Managed node groups use this security group for control plane to data plane communication.
+     *
+     * This parameter is only returned by Amazon EKS clusters that support managed node groups. For more information, see [Managed node groups](https://docs.aws.amazon.com/eks/latest/userguide/managed-node-groups.html) in the *Amazon EKS User Guide* .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eks-cluster.html#cfn-eks-cluster-clustersecuritygroupid}
+     */
+    ClusterSecurityGroupId: string;
+    /**
+     * Amazon Resource Name (ARN) or alias of the customer master key (CMK).
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eks-cluster.html#cfn-eks-cluster-encryptionconfigkeyarn}
+     */
+    EncryptionConfigKeyArn: string;
+    /**
+     * The endpoint for your Kubernetes API server, such as `https://5E1D0CEXAMPLEA591B746AFC5AB30262.yl4.us-west-2.eks.amazonaws.com` .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eks-cluster.html#cfn-eks-cluster-endpoint}
+     */
+    Endpoint: string;
+    /**
+     * The ID of your local Amazon EKS cluster on an AWS Outpost. This property isn't available for an Amazon EKS cluster on the AWS cloud.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eks-cluster.html#cfn-eks-cluster-id}
+     */
+    Id: string;
+    /**
+     * The CIDR block that Kubernetes Service IP addresses are assigned from if you created a `1.21` or later cluster with version `>1.10.1` or later of the Amazon VPC CNI add-on and specified `ipv6` for *ipFamily* when you created the cluster. Kubernetes assigns Service addresses from the unique local address range ( `fc00::/7` ) because you can't specify a custom `IPv6` CIDR block when you create the cluster.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-kubernetesnetworkconfig.html#cfn-eks-cluster-kubernetesnetworkconfig-serviceipv6cidr}
+     */
+    "KubernetesNetworkConfig.ServiceIpv6Cidr": string;
+    /**
+     * The issuer URL for the OIDC identity provider of the cluster, such as `https://oidc.eks.us-west-2.amazonaws.com/id/EXAMPLED539D4633E53DE1B716D3041E` . If you need to remove `https://` from this output value, you can include the following code in your template.
+     *
+     * `!Select [1, !Split ["//", !GetAtt EKSCluster.OpenIdConnectIssuerUrl]]`
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eks-cluster.html#cfn-eks-cluster-openidconnectissuerurl}
+     */
+    OpenIdConnectIssuerUrl: string;
+};
+/**
+ * The access configuration for the cluster.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-accessconfig.html}
+ */
+export type AccessConfig = {
+    /**
+     * The desired authentication mode for the cluster. If you create a cluster by using the EKS API, AWS SDKs, or AWS CloudFormation , the default is `CONFIG_MAP` . If you create the cluster by using the AWS Management Console , the default value is `API_AND_CONFIG_MAP` .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-accessconfig.html#cfn-eks-cluster-accessconfig-authenticationmode}
+     */
+    AuthenticationMode?: "CONFIG_MAP" | "API_AND_CONFIG_MAP" | "API" | undefined;
+    /**
+     * Specifies whether or not the cluster creator IAM principal was set as a cluster admin access entry during cluster creation time. The default value is `true` .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-accessconfig.html#cfn-eks-cluster-accessconfig-bootstrapclustercreatoradminpermissions}
+     */
+    BootstrapClusterCreatorAdminPermissions?: boolean | undefined;
+};
+/**
+ * Indicates the current configuration of the block storage capability on your EKS Auto Mode cluster. For example, if the capability is enabled or disabled. If the block storage capability is enabled, EKS Auto Mode will create and delete EBS volumes in your AWS account. For more information, see EKS Auto Mode block storage capability in the *Amazon EKS User Guide* .
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-blockstorage.html}
+ */
+export type BlockStorage = {
+    /**
+     * Indicates if the block storage capability is enabled on your EKS Auto Mode cluster. If the block storage capability is enabled, EKS Auto Mode will create and delete EBS volumes in your AWS account.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-blockstorage.html#cfn-eks-cluster-blockstorage-enabled}
+     */
+    Enabled?: boolean | undefined;
+};
+/**
+ * The cluster control plane logging configuration for your cluster.
+ *
+ * > When updating a resource, you must include this `ClusterLogging` property if the previous CloudFormation template of the resource had it.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-clusterlogging.html}
+ */
+export type ClusterLogging = {
+    /**
+     * The enabled control plane logs for your cluster. All log types are disabled if the array is empty.
+     *
+     * > When updating a resource, you must include this `EnabledTypes` property if the previous CloudFormation template of the resource had it.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-clusterlogging.html#cfn-eks-cluster-clusterlogging-enabledtypes}
+     */
+    EnabledTypes?: LoggingTypeConfig[] | undefined;
+};
+/**
+ * Indicates the current configuration of the compute capability on your EKS Auto Mode cluster. For example, if the capability is enabled or disabled. If the compute capability is enabled, EKS Auto Mode will create and delete EC2 Managed Instances in your AWS account. For more information, see EKS Auto Mode compute capability in the *Amazon EKS User Guide* .
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-computeconfig.html}
+ */
+export type ComputeConfig = {
+    /**
+     * Request to enable or disable the compute capability on your EKS Auto Mode cluster. If the compute capability is enabled, EKS Auto Mode will create and delete EC2 Managed Instances in your AWS account.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-computeconfig.html#cfn-eks-cluster-computeconfig-enabled}
+     */
+    Enabled?: boolean | undefined;
+    /**
+     * Configuration for node pools that defines the compute resources for your EKS Auto Mode cluster. For more information, see EKS Auto Mode Node Pools in the *Amazon EKS User Guide* .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-computeconfig.html#cfn-eks-cluster-computeconfig-nodepools}
+     */
+    NodePools?: string[] | undefined;
+    /**
+     * The ARN of the IAM Role EKS will assign to EC2 Managed Instances in your EKS Auto Mode cluster. This value cannot be changed after the compute capability of EKS Auto Mode is enabled. For more information, see the IAM Reference in the *Amazon EKS User Guide* .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-computeconfig.html#cfn-eks-cluster-computeconfig-noderolearn}
+     */
+    NodeRoleArn?: string | undefined;
+};
+/**
+ * The placement configuration for all the control plane instances of your local Amazon EKS cluster on an AWS Outpost. For more information, see [Capacity considerations](https://docs.aws.amazon.com/eks/latest/userguide/eks-outposts-capacity-considerations.html) in the *Amazon EKS User Guide* .
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-controlplaneplacement.html}
+ */
+export type ControlPlanePlacement = {
+    /**
+     * The name of the placement group for the Kubernetes control plane instances. This property is only used for a local cluster on an AWS Outpost.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-controlplaneplacement.html#cfn-eks-cluster-controlplaneplacement-groupname}
+     */
+    GroupName?: string | undefined;
+};
+/**
+ * Indicates the current configuration of the load balancing capability on your EKS Auto Mode cluster. For example, if the capability is enabled or disabled. For more information, see EKS Auto Mode load balancing capability in the *Amazon EKS User Guide* .
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-elasticloadbalancing.html}
+ */
+export type ElasticLoadBalancing = {
+    /**
+     * Indicates if the load balancing capability is enabled on your EKS Auto Mode cluster. If the load balancing capability is enabled, EKS Auto Mode will create and delete load balancers in your AWS account.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-elasticloadbalancing.html#cfn-eks-cluster-elasticloadbalancing-enabled}
+     */
+    Enabled?: boolean | undefined;
+};
+/**
+ * The encryption configuration for the cluster.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-encryptionconfig.html}
+ */
+export type EncryptionConfig = {
+    /**
+     * The encryption provider for the cluster.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-encryptionconfig.html#cfn-eks-cluster-encryptionconfig-provider}
+     */
+    Provider?: Provider | undefined;
+    /**
+     * Specifies the resources to be encrypted. The only supported value is `secrets` .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-encryptionconfig.html#cfn-eks-cluster-encryptionconfig-resources}
+     */
+    Resources?: string[] | undefined;
+};
+/**
+ * The Kubernetes network configuration for the cluster.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-kubernetesnetworkconfig.html}
+ */
+export type KubernetesNetworkConfig = {
+    /**
+     * Request to enable or disable the load balancing capability on your EKS Auto Mode cluster. For more information, see EKS Auto Mode load balancing capability in the *Amazon EKS User Guide* .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-kubernetesnetworkconfig.html#cfn-eks-cluster-kubernetesnetworkconfig-elasticloadbalancing}
+     */
+    ElasticLoadBalancing?: ElasticLoadBalancing | undefined;
+    /**
+     * Specify which IP family is used to assign Kubernetes pod and service IP addresses. If you don't specify a value, `ipv4` is used by default. You can only specify an IP family when you create a cluster and can't change this value once the cluster is created. If you specify `ipv6` , the VPC and subnets that you specify for cluster creation must have both `IPv4` and `IPv6` CIDR blocks assigned to them. You can't specify `ipv6` for clusters in China Regions.
+     *
+     * You can only specify `ipv6` for `1.21` and later clusters that use version `1.10.1` or later of the Amazon VPC CNI add-on. If you specify `ipv6` , then ensure that your VPC meets the requirements listed in the considerations listed in [Assigning IPv6 addresses to pods and services](https://docs.aws.amazon.com/eks/latest/userguide/cni-ipv6.html) in the *Amazon EKS User Guide* . Kubernetes assigns services `IPv6` addresses from the unique local address range `(fc00::/7)` . You can't specify a custom `IPv6` CIDR block. Pod addresses are assigned from the subnet's `IPv6` CIDR.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-kubernetesnetworkconfig.html#cfn-eks-cluster-kubernetesnetworkconfig-ipfamily}
+     */
+    IpFamily?: "ipv4" | "ipv6" | undefined;
+    /**
+     * Don't specify a value if you select `ipv6` for *ipFamily* . The CIDR block to assign Kubernetes service IP addresses from. If you don't specify a block, Kubernetes assigns addresses from either the `10.100.0.0/16` or `172.20.0.0/16` CIDR blocks. We recommend that you specify a block that does not overlap with resources in other networks that are peered or connected to your VPC. The block must meet the following requirements:
+     *
+     * - Within one of the following private IP address blocks: `10.0.0.0/8` , `172.16.0.0/12` , or `192.168.0.0/16` .
+     * - Doesn't overlap with any CIDR block assigned to the VPC that you selected for VPC.
+     * - Between `/24` and `/12` .
+     *
+     * > You can only specify a custom CIDR block when you create a cluster. You can't change this value after the cluster is created.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-kubernetesnetworkconfig.html#cfn-eks-cluster-kubernetesnetworkconfig-serviceipv4cidr}
+     */
+    ServiceIpv4Cidr?: string | undefined;
+};
+/**
+ * Enable or disable exporting the Kubernetes control plane logs for your cluster to CloudWatch Logs. By default, cluster control plane logs aren't exported to CloudWatch Logs. For more information, see [Amazon EKS Cluster control plane logs](https://docs.aws.amazon.com/eks/latest/userguide/control-plane-logs.html) in the **Amazon EKS User Guide** .
+ *
+ * > When updating a resource, you must include this `Logging` property if the previous CloudFormation template of the resource had it. > CloudWatch Logs ingestion, archive storage, and data scanning rates apply to exported control plane logs. For more information, see [CloudWatch Pricing](https://docs.aws.amazon.com/cloudwatch/pricing/) .
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-logging.html}
+ */
+export type Logging = {
+    /**
+     * The cluster control plane logging configuration for your cluster.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-logging.html#cfn-eks-cluster-logging-clusterlogging}
+     */
+    ClusterLogging?: ClusterLogging | undefined;
+};
+/**
+ * The enabled logging type. For a list of the valid logging types, see the [`types` property of `LogSetup`](https://docs.aws.amazon.com/eks/latest/APIReference/API_LogSetup.html#AmazonEKS-Type-LogSetup-types) in the *Amazon EKS API Reference* .
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-loggingtypeconfig.html}
+ */
+export type LoggingTypeConfig = {
+    /**
+     * The name of the log type.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-loggingtypeconfig.html#cfn-eks-cluster-loggingtypeconfig-type}
+     */
+    Type?: "api" | "audit" | "authenticator" | "controllerManager" | "scheduler" | undefined;
+};
+/**
+ * The configuration of your local Amazon EKS cluster on an AWS Outpost. Before creating a cluster on an Outpost, review [Creating a local cluster on an Outpost](https://docs.aws.amazon.com/eks/latest/userguide/eks-outposts-local-cluster-create.html) in the *Amazon EKS User Guide* . This API isn't available for Amazon EKS clusters on the AWS cloud.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-outpostconfig.html}
+ */
+export type OutpostConfig = {
+    /**
+     * The Amazon EC2 instance type that you want to use for your local Amazon EKS cluster on Outposts. Choose an instance type based on the number of nodes that your cluster will have. For more information, see [Capacity considerations](https://docs.aws.amazon.com/eks/latest/userguide/eks-outposts-capacity-considerations.html) in the *Amazon EKS User Guide* .
+     *
+     * The instance type that you specify is used for all Kubernetes control plane instances. The instance type can't be changed after cluster creation. The control plane is not automatically scaled by Amazon EKS.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-outpostconfig.html#cfn-eks-cluster-outpostconfig-controlplaneinstancetype}
+     */
+    ControlPlaneInstanceType: string;
+    /**
+     * An object representing the placement configuration for all the control plane instances of your local Amazon EKS cluster on an AWS Outpost. For more information, see [Capacity considerations](https://docs.aws.amazon.com/eks/latest/userguide/eks-outposts-capacity-considerations.html) in the *Amazon EKS User Guide* .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-outpostconfig.html#cfn-eks-cluster-outpostconfig-controlplaneplacement}
+     */
+    ControlPlanePlacement?: ControlPlanePlacement | undefined;
+    /**
+     * The ARN of the Outpost that you want to use for your local Amazon EKS cluster on Outposts. Only a single Outpost ARN is supported.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-outpostconfig.html#cfn-eks-cluster-outpostconfig-outpostarns}
+     */
+    OutpostArns: string[];
+};
+/**
+ * Identifies the AWS Key Management Service ( AWS KMS ) key used to encrypt the secrets.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-provider.html}
+ */
+export type Provider = {
+    /**
+     * Amazon Resource Name (ARN) or alias of the KMS key. The KMS key must be symmetric and created in the same AWS Region as the cluster. If the KMS key was created in a different account, the [IAM principal](https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_terms-and-concepts.html) must have access to the KMS key. For more information, see [Allowing users in other accounts to use a KMS key](https://docs.aws.amazon.com/kms/latest/developerguide/key-policy-modifying-external-accounts.html) in the *AWS Key Management Service Developer Guide* .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-provider.html#cfn-eks-cluster-provider-keyarn}
+     */
+    KeyArn?: string | undefined;
+};
+/**
+ * The configuration in the cluster for EKS Hybrid Nodes. You can add, change, or remove this configuration after the cluster is created.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-remotenetworkconfig.html}
+ */
+export type RemoteNetworkConfig = {
+    /**
+     * The list of network CIDRs that can contain hybrid nodes.
+     *
+     * These CIDR blocks define the expected IP address range of the hybrid nodes that join the cluster. These blocks are typically determined by your network administrator.
+     *
+     * Enter one or more IPv4 CIDR blocks in decimal dotted-quad notation (for example, `10.2.0.0/16` ).
+     *
+     * It must satisfy the following requirements:
+     *
+     * - Each block must be within an `IPv4` RFC-1918 network range. Minimum allowed size is /24, maximum allowed size is /8. Publicly-routable addresses aren't supported.
+     * - Each block cannot overlap with the range of the VPC CIDR blocks for your EKS resources, or the block of the Kubernetes service IP range.
+     * - Each block must have a route to the VPC that uses the VPC CIDR blocks, not public IPs or Elastic IPs. There are many options including AWS Transit Gateway , AWS Site-to-Site VPN , or AWS Direct Connect .
+     * - Each host must allow outbound connection to the EKS cluster control plane on TCP ports `443` and `10250` .
+     * - Each host must allow inbound connection from the EKS cluster control plane on TCP port 10250 for logs, exec and port-forward operations.
+     * - Each host must allow TCP and UDP network connectivity to and from other hosts that are running `CoreDNS` on UDP port `53` for service and pod DNS names.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-remotenetworkconfig.html#cfn-eks-cluster-remotenetworkconfig-remotenodenetworks}
+     */
+    RemoteNodeNetworks: RemoteNodeNetwork[];
+    /**
+     * The list of network CIDRs that can contain pods that run Kubernetes webhooks on hybrid nodes.
+     *
+     * These CIDR blocks are determined by configuring your Container Network Interface (CNI) plugin. We recommend the Calico CNI or Cilium CNI. Note that the Amazon VPC CNI plugin for Kubernetes isn't available for on-premises and edge locations.
+     *
+     * Enter one or more IPv4 CIDR blocks in decimal dotted-quad notation (for example, `10.2.0.0/16` ).
+     *
+     * It must satisfy the following requirements:
+     *
+     * - Each block must be within an `IPv4` RFC-1918 network range. Minimum allowed size is /24, maximum allowed size is /8. Publicly-routable addresses aren't supported.
+     * - Each block cannot overlap with the range of the VPC CIDR blocks for your EKS resources, or the block of the Kubernetes service IP range.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-remotenetworkconfig.html#cfn-eks-cluster-remotenetworkconfig-remotepodnetworks}
+     */
+    RemotePodNetworks?: RemotePodNetwork[] | undefined;
+};
+/**
+ * A network CIDR that can contain hybrid nodes.
+ *
+ * These CIDR blocks define the expected IP address range of the hybrid nodes that join the cluster. These blocks are typically determined by your network administrator.
+ *
+ * Enter one or more IPv4 CIDR blocks in decimal dotted-quad notation (for example, `10.2.0.0/16` ).
+ *
+ * It must satisfy the following requirements:
+ *
+ * - Each block must be within an `IPv4` RFC-1918 network range. Minimum allowed size is /24, maximum allowed size is /8. Publicly-routable addresses aren't supported.
+ * - Each block cannot overlap with the range of the VPC CIDR blocks for your EKS resources, or the block of the Kubernetes service IP range.
+ * - Each block must have a route to the VPC that uses the VPC CIDR blocks, not public IPs or Elastic IPs. There are many options including AWS Transit Gateway , AWS Site-to-Site VPN , or AWS Direct Connect .
+ * - Each host must allow outbound connection to the EKS cluster control plane on TCP ports `443` and `10250` .
+ * - Each host must allow inbound connection from the EKS cluster control plane on TCP port 10250 for logs, exec and port-forward operations.
+ * - Each host must allow TCP and UDP network connectivity to and from other hosts that are running `CoreDNS` on UDP port `53` for service and pod DNS names.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-remotenodenetwork.html}
+ */
+export type RemoteNodeNetwork = {
+    /**
+     * A network CIDR that can contain hybrid nodes.
+     *
+     * These CIDR blocks define the expected IP address range of the hybrid nodes that join the cluster. These blocks are typically determined by your network administrator.
+     *
+     * Enter one or more IPv4 CIDR blocks in decimal dotted-quad notation (for example, `10.2.0.0/16` ).
+     *
+     * It must satisfy the following requirements:
+     *
+     * - Each block must be within an `IPv4` RFC-1918 network range. Minimum allowed size is /24, maximum allowed size is /8. Publicly-routable addresses aren't supported.
+     * - Each block cannot overlap with the range of the VPC CIDR blocks for your EKS resources, or the block of the Kubernetes service IP range.
+     * - Each block must have a route to the VPC that uses the VPC CIDR blocks, not public IPs or Elastic IPs. There are many options including AWS Transit Gateway , AWS Site-to-Site VPN , or AWS Direct Connect .
+     * - Each host must allow outbound connection to the EKS cluster control plane on TCP ports `443` and `10250` .
+     * - Each host must allow inbound connection from the EKS cluster control plane on TCP port 10250 for logs, exec and port-forward operations.
+     * - Each host must allow TCP and UDP network connectivity to and from other hosts that are running `CoreDNS` on UDP port `53` for service and pod DNS names.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-remotenodenetwork.html#cfn-eks-cluster-remotenodenetwork-cidrs}
+     */
+    Cidrs: string[];
+};
+/**
+ * A network CIDR that can contain pods that run Kubernetes webhooks on hybrid nodes.
+ *
+ * These CIDR blocks are determined by configuring your Container Network Interface (CNI) plugin. We recommend the Calico CNI or Cilium CNI. Note that the Amazon VPC CNI plugin for Kubernetes isn't available for on-premises and edge locations.
+ *
+ * Enter one or more IPv4 CIDR blocks in decimal dotted-quad notation (for example, `10.2.0.0/16` ).
+ *
+ * It must satisfy the following requirements:
+ *
+ * - Each block must be within an `IPv4` RFC-1918 network range. Minimum allowed size is /24, maximum allowed size is /8. Publicly-routable addresses aren't supported.
+ * - Each block cannot overlap with the range of the VPC CIDR blocks for your EKS resources, or the block of the Kubernetes service IP range.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-remotepodnetwork.html}
+ */
+export type RemotePodNetwork = {
+    /**
+     * A network CIDR that can contain pods that run Kubernetes webhooks on hybrid nodes.
+     *
+     * These CIDR blocks are determined by configuring your Container Network Interface (CNI) plugin. We recommend the Calico CNI or Cilium CNI. Note that the Amazon VPC CNI plugin for Kubernetes isn't available for on-premises and edge locations.
+     *
+     * Enter one or more IPv4 CIDR blocks in decimal dotted-quad notation (for example, `10.2.0.0/16` ).
+     *
+     * It must satisfy the following requirements:
+     *
+     * - Each block must be within an `IPv4` RFC-1918 network range. Minimum allowed size is /24, maximum allowed size is /8. Publicly-routable addresses aren't supported.
+     * - Each block cannot overlap with the range of the VPC CIDR blocks for your EKS resources, or the block of the Kubernetes service IP range.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-remotepodnetwork.html#cfn-eks-cluster-remotepodnetwork-cidrs}
+     */
+    Cidrs: string[];
+};
+/**
+ * An object representing the VPC configuration to use for an Amazon EKS cluster.
+ *
+ * > When updating a resource, you must include these properties if the previous CloudFormation template of the resource had them:
+ * >
+ * > - `EndpointPublicAccess`
+ * > - `EndpointPrivateAccess`
+ * > - `PublicAccessCidrs`
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-resourcesvpcconfig.html}
+ */
+export type ResourcesVpcConfig = {
+    /**
+     * Set this value to `true` to enable private access for your cluster's Kubernetes API server endpoint. If you enable private access, Kubernetes API requests from within your cluster's VPC use the private VPC endpoint. The default value for this parameter is `false` , which disables private access for your Kubernetes API server. If you disable private access and you have nodes or AWS Fargate pods in the cluster, then ensure that `publicAccessCidrs` includes the necessary CIDR blocks for communication with the nodes or Fargate pods. For more information, see [Amazon EKS cluster endpoint access control](https://docs.aws.amazon.com/eks/latest/userguide/cluster-endpoint.html) in the **Amazon EKS User Guide** .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-resourcesvpcconfig.html#cfn-eks-cluster-resourcesvpcconfig-endpointprivateaccess}
+     */
+    EndpointPrivateAccess?: boolean | undefined;
+    /**
+     * Set this value to `false` to disable public access to your cluster's Kubernetes API server endpoint. If you disable public access, your cluster's Kubernetes API server can only receive requests from within the cluster VPC. The default value for this parameter is `true` , which enables public access for your Kubernetes API server. For more information, see [Amazon EKS cluster endpoint access control](https://docs.aws.amazon.com/eks/latest/userguide/cluster-endpoint.html) in the **Amazon EKS User Guide** .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-resourcesvpcconfig.html#cfn-eks-cluster-resourcesvpcconfig-endpointpublicaccess}
+     */
+    EndpointPublicAccess?: boolean | undefined;
+    /**
+     * The CIDR blocks that are allowed access to your cluster's public Kubernetes API server endpoint. Communication to the endpoint from addresses outside of the CIDR blocks that you specify is denied. The default value is `0.0.0.0/0` . If you've disabled private endpoint access, make sure that you specify the necessary CIDR blocks for every node and AWS Fargate `Pod` in the cluster. For more information, see [Amazon EKS cluster endpoint access control](https://docs.aws.amazon.com/eks/latest/userguide/cluster-endpoint.html) in the **Amazon EKS User Guide** .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-resourcesvpcconfig.html#cfn-eks-cluster-resourcesvpcconfig-publicaccesscidrs}
+     */
+    PublicAccessCidrs?: string[] | undefined;
+    /**
+     * Specify one or more security groups for the cross-account elastic network interfaces that Amazon EKS creates to use that allow communication between your nodes and the Kubernetes control plane. If you don't specify any security groups, then familiarize yourself with the difference between Amazon EKS defaults for clusters deployed with Kubernetes. For more information, see [Amazon EKS security group considerations](https://docs.aws.amazon.com/eks/latest/userguide/sec-group-reqs.html) in the **Amazon EKS User Guide** .
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-resourcesvpcconfig.html#cfn-eks-cluster-resourcesvpcconfig-securitygroupids}
+     */
+    SecurityGroupIds?: string[] | undefined;
+    /**
+     * Specify subnets for your Amazon EKS nodes. Amazon EKS creates cross-account elastic network interfaces in these subnets to allow communication between your nodes and the Kubernetes control plane.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-resourcesvpcconfig.html#cfn-eks-cluster-resourcesvpcconfig-subnetids}
+     */
+    SubnetIds: string[];
+};
+/**
+ * Request to update the configuration of the storage capability of your EKS Auto Mode cluster. For example, enable the capability. For more information, see EKS Auto Mode block storage capability in the *Amazon EKS User Guide* .
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-storageconfig.html}
+ */
+export type StorageConfig = {
+    /**
+     * Request to configure EBS Block Storage settings for your EKS Auto Mode cluster.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-storageconfig.html#cfn-eks-cluster-storageconfig-blockstorage}
+     */
+    BlockStorage?: BlockStorage | undefined;
+};
+/**
+ * The support policy to use for the cluster. Extended support allows you to remain on specific Kubernetes versions for longer. Clusters in extended support have higher costs. The default value is `EXTENDED` . Use `STANDARD` to disable extended support.
+ *
+ * [Learn more about EKS Extended Support in the *Amazon EKS User Guide* .](https://docs.aws.amazon.com/eks/latest/userguide/extended-support-control.html)
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-upgradepolicy.html}
+ */
+export type UpgradePolicy = {
+    /**
+     * If the cluster is set to `EXTENDED` , it will enter extended support at the end of standard support. If the cluster is set to `STANDARD` , it will be automatically upgraded at the end of standard support.
+     *
+     * [Learn more about EKS Extended Support in the *Amazon EKS User Guide* .](https://docs.aws.amazon.com/eks/latest/userguide/extended-support-control.html)
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-upgradepolicy.html#cfn-eks-cluster-upgradepolicy-supporttype}
+     */
+    SupportType?: "STANDARD" | "EXTENDED" | undefined;
+};
+/**
+ * The configuration for zonal shift for the cluster.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-zonalshiftconfig.html}
+ */
+export type ZonalShiftConfig = {
+    /**
+     * If zonal shift is enabled, AWS configures zonal autoshift for the cluster.
+     * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-eks-cluster-zonalshiftconfig.html#cfn-eks-cluster-zonalshiftconfig-enabled}
+     */
+    Enabled?: boolean | undefined;
+};
+//# sourceMappingURL=aws-eks-cluster.d.ts.map