@pproenca/ffmpeg-darwin-x64 0.1.7 → 0.1.9

package/include/vpx/vp8cx.h

@@ -1,1118 +0,0 @@
-/*
- *  Copyright (c) 2010 The WebM project authors. All Rights Reserved.
- *
- *  Use of this source code is governed by a BSD-style license
- *  that can be found in the LICENSE file in the root of the source
- *  tree. An additional intellectual property rights grant can be found
- *  in the file PATENTS.  All contributing project authors may
- *  be found in the AUTHORS file in the root of the source tree.
- */
-#ifndef VPX_VPX_VP8CX_H_
-#define VPX_VPX_VP8CX_H_
-
-/*!\defgroup vp8_encoder WebM VP8/VP9 Encoder
- * \ingroup vp8
- *
- * @{
- */
-#include "./vp8.h"
-#include "./vpx_encoder.h"
-#include "./vpx_ext_ratectrl.h"
-
-/*!\file
- * \brief Provides definitions for using VP8 or VP9 encoder algorithm within the
- *        vpx Codec Interface.
- */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*!\name Algorithm interface for VP8
- *
- * This interface provides the capability to encode raw VP8 streams.
- * @{
- */
-
-/*!\brief A single instance of the VP8 encoder.
- *\deprecated This access mechanism is provided for backwards compatibility;
- * prefer vpx_codec_vp8_cx().
- */
-extern vpx_codec_iface_t vpx_codec_vp8_cx_algo;
-
-/*!\brief The interface to the VP8 encoder.
- */
-extern vpx_codec_iface_t *vpx_codec_vp8_cx(void);
-/*!@} - end algorithm interface member group*/
-
-/*!\name Algorithm interface for VP9
- *
- * This interface provides the capability to encode raw VP9 streams.
- * @{
- */
-
-/*!\brief A single instance of the VP9 encoder.
- *\deprecated This access mechanism is provided for backwards compatibility;
- * prefer vpx_codec_vp9_cx().
- */
-extern vpx_codec_iface_t vpx_codec_vp9_cx_algo;
-
-/*!\brief The interface to the VP9 encoder.
- */
-extern vpx_codec_iface_t *vpx_codec_vp9_cx(void);
-/*!@} - end algorithm interface member group*/
-
-/*
- * Algorithm Flags
- */
-
-/*!\brief Don't reference the last frame
- *
- * When this flag is set, the encoder will not use the last frame as a
- * predictor. When not set, the encoder will choose whether to use the
- * last frame or not automatically.
- */
-#define VP8_EFLAG_NO_REF_LAST (1 << 16)
-
-/*!\brief Don't reference the golden frame
- *
- * When this flag is set, the encoder will not use the golden frame as a
- * predictor. When not set, the encoder will choose whether to use the
- * golden frame or not automatically.
- */
-#define VP8_EFLAG_NO_REF_GF (1 << 17)
-
-/*!\brief Don't reference the alternate reference frame
- *
- * When this flag is set, the encoder will not use the alt ref frame as a
- * predictor. When not set, the encoder will choose whether to use the
- * alt ref frame or not automatically.
- */
-#define VP8_EFLAG_NO_REF_ARF (1 << 21)
-
-/*!\brief Don't update the last frame
- *
- * When this flag is set, the encoder will not update the last frame with
- * the contents of the current frame.
- */
-#define VP8_EFLAG_NO_UPD_LAST (1 << 18)
-
-/*!\brief Don't update the golden frame
- *
- * When this flag is set, the encoder will not update the golden frame with
- * the contents of the current frame.
- */
-#define VP8_EFLAG_NO_UPD_GF (1 << 22)
-
-/*!\brief Don't update the alternate reference frame
- *
- * When this flag is set, the encoder will not update the alt ref frame with
- * the contents of the current frame.
- */
-#define VP8_EFLAG_NO_UPD_ARF (1 << 23)
-
-/*!\brief Force golden frame update
- *
- * When this flag is set, the encoder copy the contents of the current frame
- * to the golden frame buffer.
- */
-#define VP8_EFLAG_FORCE_GF (1 << 19)
-
-/*!\brief Force alternate reference frame update
- *
- * When this flag is set, the encoder copy the contents of the current frame
- * to the alternate reference frame buffer.
- */
-#define VP8_EFLAG_FORCE_ARF (1 << 24)
-
-/*!\brief Disable entropy update
- *
- * When this flag is set, the encoder will not update its internal entropy
- * model based on the entropy of this frame.
- */
-#define VP8_EFLAG_NO_UPD_ENTROPY (1 << 20)
-
-/*!\brief VPx encoder control functions
- *
- * This set of macros define the control functions available for VPx
- * encoder interface.
- *
- * \sa #vpx_codec_control
- */
-enum vp8e_enc_control_id {
-  /*!\brief Codec control function to pass an ROI map to encoder.
-   *
-   * Supported in codecs: VP8
-   */
-  VP8E_SET_ROI_MAP = 8,
-
-  /*!\brief Codec control function to pass an Active map to encoder.
-   *
-   * Supported in codecs: VP8, VP9
-   */
-  VP8E_SET_ACTIVEMAP,
-
-  /*!\brief Codec control function to set encoder scaling mode.
-   *
-   * Supported in codecs: VP8, VP9
-   */
-  VP8E_SET_SCALEMODE = 11,
-
-  /*!\brief Codec control function to set encoder internal speed settings.
-   *
-   * Changes in this value influences, among others, the encoder's selection
-   * of motion estimation methods. Values greater than 0 will increase encoder
-   * speed at the expense of quality.
-   *
-   * \note Valid range for VP8: -16..16
-   * \note Valid range for VP9: -9..9
-   * \note A negative value (-n) is treated as its absolute value (n) in VP9.
-   *
-   * Supported in codecs: VP8, VP9
-   */
-  VP8E_SET_CPUUSED = 13,
-
-  /*!\brief Codec control function to enable automatic use of arf frames.
-   *
-   * \note Valid range for VP8: 0..1
-   * \note Valid range for VP9: 0..6
-   *
-   * Supported in codecs: VP8, VP9
-   */
-  VP8E_SET_ENABLEAUTOALTREF,
-
-  /*!\brief control function to set noise sensitivity
-   *
-   * 0: off, 1: OnYOnly, 2: OnYUV,
-   * 3: OnYUVAggressive, 4: Adaptive
-   *
-   * Supported in codecs: VP8
-   */
-  VP8E_SET_NOISE_SENSITIVITY,
-
-  /*!\brief Codec control function to set higher sharpness at the expense
-   * of a lower PSNR.
-   *
-   * \note Valid range: 0..7
-   *
-   * Supported in codecs: VP8, VP9
-   */
-  VP8E_SET_SHARPNESS,
-
-  /*!\brief Codec control function to set the threshold for MBs treated static.
-   *
-   * Supported in codecs: VP8, VP9
-   */
-  VP8E_SET_STATIC_THRESHOLD,
-
-  /*!\brief Codec control function to set the number of token partitions.
-   *
-   * Supported in codecs: VP8
-   */
-  VP8E_SET_TOKEN_PARTITIONS,
-
-  /*!\brief Codec control function to get last quantizer chosen by the encoder.
-   *
-   * Return value uses internal quantizer scale defined by the codec.
-   *
-   * Supported in codecs: VP8, VP9
-   */
-  VP8E_GET_LAST_QUANTIZER,
-
-  /*!\brief Codec control function to get last quantizer chosen by the encoder.
-   *
-   * Return value uses the 0..63 scale as used by the rc_*_quantizer config
-   * parameters.
-   *
-   * Supported in codecs: VP8, VP9
-   */
-  VP8E_GET_LAST_QUANTIZER_64,
-
-  /*!\brief Codec control function to set the max no of frames to create arf.
-   *
-   * Supported in codecs: VP8, VP9
-   */
-  VP8E_SET_ARNR_MAXFRAMES,
-
-  /*!\brief Codec control function to set the filter strength for the arf.
-   *
-   * Supported in codecs: VP8, VP9
-   */
-  VP8E_SET_ARNR_STRENGTH,
-
-  /*!\deprecated control function to set the filter type to use for the arf. */
-  VP8E_SET_ARNR_TYPE,
-
-  /*!\brief Codec control function to set visual tuning.
-   *
-   * Supported in codecs: VP8, VP9
-   */
-  VP8E_SET_TUNING,
-
-  /*!\brief Codec control function to set constrained / constant quality level.
-   *
-   * \attention For this value to be used vpx_codec_enc_cfg_t::rc_end_usage must
-   *            be set to #VPX_CQ or #VPX_Q
-   * \note Valid range: 0..63
-   *
-   * Supported in codecs: VP8, VP9
-   */
-  VP8E_SET_CQ_LEVEL,
-
-  /*!\brief Codec control function to set Max data rate for Intra frames.
-   *
-   * This value controls additional clamping on the maximum size of a
-   * keyframe. It is expressed as a percentage of the average
-   * per-frame bitrate, with the special (and default) value 0 meaning
-   * unlimited, or no additional clamping beyond the codec's built-in
-   * algorithm.
-   *
-   * For example, to allocate no more than 4.5 frames worth of bitrate
-   * to a keyframe, set this to 450.
-   *
-   * Supported in codecs: VP8, VP9
-   */
-  VP8E_SET_MAX_INTRA_BITRATE_PCT,
-
-  /*!\brief Codec control function to set reference and update frame flags.
-   *
-   *  Supported in codecs: VP8
-   */
-  VP8E_SET_FRAME_FLAGS,
-
-  /*!\brief Codec control function to set max data rate for Inter frames.
-   *
-   * This value controls additional clamping on the maximum size of an
-   * inter frame. It is expressed as a percentage of the average
-   * per-frame bitrate, with the special (and default) value 0 meaning
-   * unlimited, or no additional clamping beyond the codec's built-in
-   * algorithm.
-   *
-   * For example, to allow no more than 4.5 frames worth of bitrate
-   * to an inter frame, set this to 450.
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_SET_MAX_INTER_BITRATE_PCT,
-
-  /*!\brief Boost percentage for Golden Frame in CBR mode.
-   *
-   * This value controls the amount of boost given to Golden Frame in
-   * CBR mode. It is expressed as a percentage of the average
-   * per-frame bitrate, with the special (and default) value 0 meaning
-   * the feature is off, i.e., no golden frame boost in CBR mode and
-   * average bitrate target is used.
-   *
-   * For example, to allow 100% more bits, i.e., 2X, in a golden frame
-   * than average frame, set this to 100.
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_SET_GF_CBR_BOOST_PCT,
-
-  /*!\brief Codec control function to set the temporal layer id.
-   *
-   * For temporal scalability: this control allows the application to set the
-   * layer id for each frame to be encoded. Note that this control must be set
-   * for every frame prior to encoding. The usage of this control function
-   * supersedes the internal temporal pattern counter, which is now deprecated.
-   *
-   * Supported in codecs: VP8
-   */
-  VP8E_SET_TEMPORAL_LAYER_ID,
-
-  /*!\brief Codec control function to set encoder screen content mode.
-   *
-   * 0: off, 1: On, 2: On with more aggressive rate control.
-   *
-   * Supported in codecs: VP8
-   */
-  VP8E_SET_SCREEN_CONTENT_MODE,
-
-  /*!\brief Codec control function to set lossless encoding mode.
-   *
-   * VP9 can operate in lossless encoding mode, in which the bitstream
-   * produced will be able to decode and reconstruct a perfect copy of
-   * input source. This control function provides a mean to switch encoder
-   * into lossless coding mode(1) or normal coding mode(0) that may be lossy.
-   *                          0 = lossy coding mode
-   *                          1 = lossless coding mode
-   *
-   *  By default, encoder operates in normal coding mode (maybe lossy).
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_SET_LOSSLESS,
-
-  /*!\brief Codec control function to set number of tile columns.
-   *
-   * In encoding and decoding, VP9 allows an input image frame be partitioned
-   * into separated vertical tile columns, which can be encoded or decoded
-   * independently. This enables easy implementation of parallel encoding and
-   * decoding. This control requests the encoder to use column tiles in
-   * encoding an input frame, with number of tile columns (in Log2 unit) as
-   * the parameter:
-   *             0 = 1 tile column
-   *             1 = 2 tile columns
-   *             2 = 4 tile columns
-   *             .....
-   *             n = 2**n tile columns
-   * The requested tile columns will be capped by the encoder based on image
-   * size limitations (The minimum width of a tile column is 256 pixels, the
-   * maximum is 4096).
-   *
-   * By default, the value is 6, i.e., the maximum number of tiles supported by
-   * the resolution.
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_SET_TILE_COLUMNS,
-
-  /*!\brief Codec control function to set number of tile rows.
-   *
-   * In encoding and decoding, VP9 allows an input image frame be partitioned
-   * into separated horizontal tile rows. Tile rows are encoded or decoded
-   * sequentially. Even though encoding/decoding of later tile rows depends on
-   * earlier ones, this allows the encoder to output data packets for tile rows
-   * prior to completely processing all tile rows in a frame, thereby reducing
-   * the latency in processing between input and output. The parameter
-   * for this control describes the number of tile rows, which has a valid
-   * range [0, 2]:
-   *            0 = 1 tile row
-   *            1 = 2 tile rows
-   *            2 = 4 tile rows
-   *
-   * By default, the value is 0, i.e. one single row tile for entire image.
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_SET_TILE_ROWS,
-
-  /*!\brief Codec control function to enable frame parallel decoding feature.
-   *
-   * VP9 has a bitstream feature to reduce decoding dependency between frames
-   * by turning off backward update of probability context used in encoding
-   * and decoding. This allows staged parallel processing of more than one
-   * video frame in the decoder. This control function provides a means to
-   * turn this feature on or off for bitstreams produced by encoder.
-   *
-   * By default, this feature is on.
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_SET_FRAME_PARALLEL_DECODING,
-
-  /*!\brief Codec control function to set adaptive quantization mode.
-   *
-   * VP9 has a segment based feature that allows encoder to adaptively change
-   * quantization parameter for each segment within a frame to improve the
-   * subjective quality. This control makes encoder operate in one of the
-   * several AQ_modes supported.
-   *
-   * By default, encoder operates with AQ_Mode 0(adaptive quantization off).
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_SET_AQ_MODE,
-
-  /*!\brief Codec control function to enable/disable periodic Q boost.
-   *
-   * One VP9 encoder speed feature is to enable quality boost by lowering
-   * frame level Q periodically. This control function provides a mean to
-   * turn on/off this feature.
-   *               0 = off
-   *               1 = on
-   *
-   * By default, the encoder is allowed to use this feature for appropriate
-   * encoding modes.
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_SET_FRAME_PERIODIC_BOOST,
-
-  /*!\brief Codec control function to set noise sensitivity.
-   *
-   *  0: off, 1: On(YOnly), 2: For SVC only, on top two spatial layers(YOnly)
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_SET_NOISE_SENSITIVITY,
-
-  /*!\brief Codec control function to turn on/off SVC in encoder.
-   * \note Return value is VPX_CODEC_INVALID_PARAM if the encoder does not
-   *       support SVC in its current encoding mode
-   *  0: off, 1: on
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_SET_SVC,
-
-  /*!\brief Codec control function to pass an ROI map to encoder.
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_SET_ROI_MAP,
-
-  /*!\brief Codec control function to set parameters for SVC.
-   * \note Parameters contain min_q, max_q, scaling factor for each of the
-   *       SVC layers.
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_SET_SVC_PARAMETERS,
-
-  /*!\brief Codec control function to set svc layer for spatial and temporal.
-   * \note Valid ranges: 0..#vpx_codec_enc_cfg::ss_number_layers for spatial
-   *                     layer and 0..#vpx_codec_enc_cfg::ts_number_layers for
-   *                     temporal layer.
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_SET_SVC_LAYER_ID,
-
-  /*!\brief Codec control function to set content type.
-   * \note Valid parameter range:
-   *              VP9E_CONTENT_DEFAULT = Regular video content (Default)
-   *              VP9E_CONTENT_SCREEN  = Screen capture content
-   *              VP9E_CONTENT_FILM    = Film content: improves grain retention
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_SET_TUNE_CONTENT,
-
-  /*!\brief Codec control function to get svc layer ID.
-   * \note The layer ID returned is for the data packet from the registered
-   *       callback function.
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_GET_SVC_LAYER_ID,
-
-  /*!\brief Codec control function to register callback to get per layer packet.
-   * \note Parameter for this control function is a structure with a callback
-   *       function and a pointer to private data used by the callback.
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_REGISTER_CX_CALLBACK,
-
-  /*!\brief Codec control function to set color space info.
-   * \note Valid ranges: 0..7, default is "UNKNOWN".
-   *                     0 = UNKNOWN,
-   *                     1 = BT_601
-   *                     2 = BT_709
-   *                     3 = SMPTE_170
-   *                     4 = SMPTE_240
-   *                     5 = BT_2020
-   *                     6 = RESERVED
-   *                     7 = SRGB
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_SET_COLOR_SPACE,
-
-  /*!\brief Codec control function to set minimum interval between GF/ARF frames
-   *
-   * By default the value is set as 4.
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_SET_MIN_GF_INTERVAL = 48,
-
-  /*!\brief Codec control function to set minimum interval between GF/ARF frames
-   *
-   * By default the value is set as 16.
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_SET_MAX_GF_INTERVAL,
-
-  /*!\brief Codec control function to get an Active map back from the encoder.
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_GET_ACTIVEMAP,
-
-  /*!\brief Codec control function to set color range bit.
-   * \note Valid ranges: 0..1, default is 0
-   *                     0 = Limited range (16..235 or HBD equivalent)
-   *                     1 = Full range (0..255 or HBD equivalent)
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_SET_COLOR_RANGE,
-
-  /*!\brief Codec control function to set the frame flags and buffer indices
-   * for spatial layers. The frame flags and buffer indices are set using the
-   * struct #vpx_svc_ref_frame_config defined below.
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_SET_SVC_REF_FRAME_CONFIG,
-
-  /*!\brief Codec control function to set intended rendering image size.
-   *
-   * By default, this is identical to the image size in pixels.
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_SET_RENDER_SIZE,
-
-  /*!\brief Codec control function to set target level.
-   *
-   * 255: off (default); 0: only keep level stats; 10: target for level 1.0;
-   * 11: target for level 1.1; ... 62: target for level 6.2
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_SET_TARGET_LEVEL,
-
-  /*!\brief Codec control function to set row level multi-threading.
-   *
-   * 0 : off, 1 : on
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_SET_ROW_MT,
-
-  /*!\brief Codec control function to get bitstream level.
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_GET_LEVEL,
-
-  /*!\brief Codec control function to enable/disable special mode for altref
-   *        adaptive quantization. You can use it with --aq-mode concurrently.
-   *
-   * Enable special adaptive quantization for altref frames based on their
-   * expected prediction quality for the future frames.
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_SET_ALT_REF_AQ,
-
-  /*!\brief Boost percentage for Golden Frame in CBR mode.
-   *
-   * This value controls the amount of boost given to Golden Frame in
-   * CBR mode. It is expressed as a percentage of the average
-   * per-frame bitrate, with the special (and default) value 0 meaning
-   * the feature is off, i.e., no golden frame boost in CBR mode and
-   * average bitrate target is used.
-   *
-   * For example, to allow 100% more bits, i.e., 2X, in a golden frame
-   * than average frame, set this to 100.
-   *
-   * Supported in codecs: VP8
-   */
-  VP8E_SET_GF_CBR_BOOST_PCT,
-
-  /*!\brief Codec control function to enable the extreme motion vector unit test
-   * in VP9. Please note that this is only used in motion vector unit test.
-   *
-   * 0 : off, 1 : MAX_EXTREME_MV, 2 : MIN_EXTREME_MV
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_ENABLE_MOTION_VECTOR_UNIT_TEST,
-
-  /*!\brief Codec control function to constrain the inter-layer prediction
-   * (prediction of lower spatial resolution) in VP9 SVC.
-   *
-   * 0 : inter-layer prediction on, 1 : off, 2 : off only on non-key frames
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_SET_SVC_INTER_LAYER_PRED,
-
-  /*!\brief Codec control function to set mode and thresholds for frame
-   *  dropping in SVC. Drop frame thresholds are set per-layer. Mode is set as:
-   * 0 : layer-dependent dropping, 1 : constrained dropping, current layer drop
-   * forces drop on all upper layers. Default mode is 0.
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_SET_SVC_FRAME_DROP_LAYER,
-
-  /*!\brief Codec control function to get the refresh and reference flags and
-   * the buffer indices, up to the last encoded spatial layer.
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_GET_SVC_REF_FRAME_CONFIG,
-
-  /*!\brief Codec control function to enable/disable use of golden reference as
-   * a second temporal reference for SVC. Only used when inter-layer prediction
-   * is disabled on INTER frames.
-   *
-   * 0: Off, 1: Enabled (default)
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_SET_SVC_GF_TEMPORAL_REF,
-
-  /*!\brief Codec control function to enable spatial layer sync frame, for any
-   * spatial layer. Enabling it for layer k means spatial layer k will disable
-   * all temporal prediction, but keep the inter-layer prediction. It will
-   * refresh any temporal reference buffer for that layer, and reset the
-   * temporal layer for the superframe to 0. Setting the layer sync for base
-   * spatial layer forces a key frame. Default is off (0) for all spatial
-   * layers. Spatial layer sync flag is reset to 0 after each encoded layer,
-   * so when control is invoked it is only used for the current superframe.
-   *
-   * 0: Off (default), 1: Enabled
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_SET_SVC_SPATIAL_LAYER_SYNC,
-
-  /*!\brief Codec control function to enable temporal dependency model.
-   *
-   * Vp9 allows the encoder to run temporal dependency model and use it to
-   * improve the compression performance. To enable, set this parameter to be
-   * 1. The default value is set to be 1.
-   */
-  VP9E_SET_TPL,
-
-  /*!\brief Codec control function to enable key frame temporal filtering.
-   *
-   * Vp9 allows the encoder to run key frame temporal filtering and use it to
-   * improve the compression performance. To enable, set this parameter to be
-   * 1. The default value is set to be 0.
-   */
-  VP9E_SET_KEY_FRAME_FILTERING,
-
-  /*!\brief Codec control function to enable postencode frame drop.
-   *
-   * This will allow encoder to drop frame after it's encoded.
-   *
-   * 0: Off (default), 1: Enabled
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_SET_POSTENCODE_DROP,
-
-  /*!\brief Codec control function to set delta q for uv.
-   *
-   * Cap it at +/-15.
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_SET_DELTA_Q_UV,
-
-  /*!\brief Codec control function to disable increase Q on overshoot in CBR.
-   *
-   * 0: On (default), 1: Disable.
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_SET_DISABLE_OVERSHOOT_MAXQ_CBR,
-
-  /*!\brief Codec control function to disable loopfilter.
-   *
-   * 0: Loopfilter on all frames, 1: Disable on non reference frames.
-   * 2: Disable on all frames.
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_SET_DISABLE_LOOPFILTER,
-
-  /*!\brief Codec control function to enable external rate control library.
-   *
-   * args[0]: path of the rate control library
-   *
-   * args[1]: private config of the rate control library
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_SET_EXTERNAL_RATE_CONTROL,
-
-  /*!\brief Codec control to disable internal features in rate control.
-   *
-   * This will do 3 things, only for 1 pass:
-   *  - Turn off low motion computation
-   *  - Turn off gf update constraint on key frame frequency
-   *  - Turn off content mode for cyclic refresh
-   *
-   * With those, the rate control is expected to work exactly the same as the
-   * interface provided in ratectrl_rtc.cc/h
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_SET_RTC_EXTERNAL_RATECTRL,
-
-  /*!\brief Codec control function to get loopfilter level in the encoder.
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_GET_LOOPFILTER_LEVEL,
-
-  /*!\brief Codec control to get last quantizers for all spatial layers.
-   *
-   * Return value uses an array of internal quantizers scale defined by the
-   * codec, for all spatial layers.
-   * The size of the array passed in should be #VPX_SS_MAX_LAYERS.
-   *
-   * Supported in codecs: VP9
-   */
-  VP9E_GET_LAST_QUANTIZER_SVC_LAYERS,
-
-  /*!\brief Codec control to disable internal features in rate control.
-   *
-   * This will turn off cyclic refresh for vp8.
-   *
-   * With this, the rate control is expected to work exactly the same as the
-   * interface provided in vp8_ratectrl_rtc.cc/h
-   *
-   * Supported in codecs: VP8
-   */
-  VP8E_SET_RTC_EXTERNAL_RATECTRL,
-
-  /*!\brief Codec control to set quantizer for the next frame.
-   *
-   * This will turn off cyclic refresh. Only applicable to 1-pass without
-   * spatial layers.
-   *
-   * Supported in codecs: VP9
-   *
-   */
-  VP9E_SET_QUANTIZER_ONE_PASS,
-};
-
-/*!\brief vpx 1-D scaling mode
- *
- * This set of constants define 1-D vpx scaling modes
- */
-typedef enum vpx_scaling_mode_1d {
-  VP8E_NORMAL = 0,
-  VP8E_FOURFIVE = 1,
-  VP8E_THREEFIVE = 2,
-  VP8E_ONETWO = 3
-} VPX_SCALING_MODE;
-
-/*!\brief Temporal layering mode enum for VP9 SVC.
- *
- * This set of macros define the different temporal layering modes.
- * Supported codecs: VP9 (in SVC mode)
- *
- */
-typedef enum vp9e_temporal_layering_mode {
-  /*!\brief No temporal layering.
-   * Used when only spatial layering is used.
-   */
-  VP9E_TEMPORAL_LAYERING_MODE_NOLAYERING = 0,
-
-  /*!\brief Bypass mode.
-   * Used when application needs to control temporal layering.
-   * This will only work when the number of spatial layers equals 1.
-   */
-  VP9E_TEMPORAL_LAYERING_MODE_BYPASS = 1,
-
-  /*!\brief 0-1-0-1... temporal layering scheme with two temporal layers.
-   */
-  VP9E_TEMPORAL_LAYERING_MODE_0101 = 2,
-
-  /*!\brief 0-2-1-2... temporal layering scheme with three temporal layers.
-   */
-  VP9E_TEMPORAL_LAYERING_MODE_0212 = 3
-} VP9E_TEMPORAL_LAYERING_MODE;
-
-/*!\brief  vpx region of interest map
- *
- * These defines the data structures for the region of interest map
- *
- */
-
-typedef struct vpx_roi_map {
-  /*! If ROI is enabled. */
-  uint8_t enabled;
-  /*! An id between 0-3 (0-7 for vp9) for each 16x16 (8x8 for VP9)
-   * region within a frame. */
-  unsigned char *roi_map;
-  unsigned int rows; /**< Number of rows. */
-  unsigned int cols; /**< Number of columns. */
-  /*! VP8 only uses the first 4 segments. VP9 uses 8 segments. */
-  int delta_q[8];  /**< Quantizer deltas. Valid range: [-63, 63].*/
-  int delta_lf[8]; /**< Loop filter deltas. Valid range: [-63, 63].*/
-  /*! skip and ref frame segment is only used in VP9. */
-  int skip[8];      /**< Skip this block. */
-  int ref_frame[8]; /**< Reference frame for this block. */
-  /*! Static breakout threshold for each segment. Only used in VP8. */
-  unsigned int static_threshold[4];
-} vpx_roi_map_t;
-
-/*!\brief  vpx active region map
- *
- * These defines the data structures for active region map
- *
- */
-
-typedef struct vpx_active_map {
-  /*!\brief specify an on (1) or off (0) each 16x16 region within a frame */
-  unsigned char *active_map;
-  unsigned int rows; /**< number of rows */
-  unsigned int cols; /**< number of cols */
-} vpx_active_map_t;
-
-/*!\brief  vpx image scaling mode
- *
- * This defines the data structure for image scaling mode
- *
- */
-typedef struct vpx_scaling_mode {
-  VPX_SCALING_MODE h_scaling_mode; /**< horizontal scaling mode */
-  VPX_SCALING_MODE v_scaling_mode; /**< vertical scaling mode   */
-} vpx_scaling_mode_t;
-
-/*!\brief VP8 token partition mode
- *
- * This defines VP8 partitioning mode for compressed data, i.e., the number of
- * sub-streams in the bitstream. Used for parallelized decoding.
- *
- */
-
-typedef enum {
-  VP8_ONE_TOKENPARTITION = 0,
-  VP8_TWO_TOKENPARTITION = 1,
-  VP8_FOUR_TOKENPARTITION = 2,
-  VP8_EIGHT_TOKENPARTITION = 3
-} vp8e_token_partitions;
-
-/*!brief VP9 encoder content type */
-typedef enum {
-  VP9E_CONTENT_DEFAULT,
-  VP9E_CONTENT_SCREEN,
-  VP9E_CONTENT_FILM,
-  VP9E_CONTENT_INVALID
-} vp9e_tune_content;
-
-/*!\brief VP8 model tuning parameters
- *
- * Changes the encoder to tune for certain types of input material.
- *
- */
-typedef enum { VP8_TUNE_PSNR, VP8_TUNE_SSIM } vp8e_tuning;
-
-/*!\brief  vp9 svc layer parameters
- *
- * This defines the spatial and temporal layer id numbers for svc encoding.
- * This is used with the #VP9E_SET_SVC_LAYER_ID control to set the spatial and
- * temporal layer id for the current frame.
- *
- */
-typedef struct vpx_svc_layer_id {
-  int spatial_layer_id; /**< First spatial layer to start encoding. */
-  // TODO(jianj): Deprecated, to be removed.
-  int temporal_layer_id; /**< Temporal layer id number. */
-  int temporal_layer_id_per_spatial[VPX_SS_MAX_LAYERS]; /**< Temp layer id. */
-} vpx_svc_layer_id_t;
-
-/*!\brief vp9 svc frame flag parameters.
- *
- * This defines the frame flags and buffer indices for each spatial layer for
- * svc encoding.
- * This is used with the #VP9E_SET_SVC_REF_FRAME_CONFIG control to set frame
- * flags and buffer indices for each spatial layer for the current (super)frame.
- *
- */
-typedef struct vpx_svc_ref_frame_config {
-  int lst_fb_idx[VPX_SS_MAX_LAYERS];         /**< Last buffer index. */
-  int gld_fb_idx[VPX_SS_MAX_LAYERS];         /**< Golden buffer index. */
-  int alt_fb_idx[VPX_SS_MAX_LAYERS];         /**< Altref buffer index. */
-  int update_buffer_slot[VPX_SS_MAX_LAYERS]; /**< Update reference frames. */
-  // TODO(jianj): Remove update_last/golden/alt_ref, these are deprecated.
-  int update_last[VPX_SS_MAX_LAYERS];       /**< Update last. */
-  int update_golden[VPX_SS_MAX_LAYERS];     /**< Update golden. */
-  int update_alt_ref[VPX_SS_MAX_LAYERS];    /**< Update altref. */
-  int reference_last[VPX_SS_MAX_LAYERS];    /**< Last as reference. */
-  int reference_golden[VPX_SS_MAX_LAYERS];  /**< Golden as reference. */
-  int reference_alt_ref[VPX_SS_MAX_LAYERS]; /**< Altref as reference. */
-  int64_t duration[VPX_SS_MAX_LAYERS];      /**< Duration per spatial layer. */
-} vpx_svc_ref_frame_config_t;
-
-/*!\brief VP9 svc frame dropping mode.
- *
- * This defines the frame drop mode for SVC.
- *
- */
-typedef enum {
-  CONSTRAINED_LAYER_DROP,
-  /**< Upper layers are constrained to drop if current layer drops. */
-  LAYER_DROP,           /**< Any spatial layer can drop. */
-  FULL_SUPERFRAME_DROP, /**< Only full superframe can drop. */
-  CONSTRAINED_FROM_ABOVE_DROP,
-  /**< Lower layers are constrained to drop if current layer drops. */
-} SVC_LAYER_DROP_MODE;
-
-/*!\brief vp9 svc frame dropping parameters.
- *
- * This defines the frame drop thresholds for each spatial layer, and
- * the frame dropping mode: 0 = layer based frame dropping (default),
- * 1 = constrained dropping where current layer drop forces all upper
- * spatial layers to drop.
- */
-typedef struct vpx_svc_frame_drop {
-  int framedrop_thresh[VPX_SS_MAX_LAYERS]; /**< Frame drop thresholds */
-  SVC_LAYER_DROP_MODE
-  framedrop_mode;      /**< Layer-based or constrained dropping. */
-  int max_consec_drop; /**< Maximum consecutive drops, for any layer. */
-} vpx_svc_frame_drop_t;
-
-/*!\brief vp9 svc spatial layer sync parameters.
- *
- * This defines the spatial layer sync flag, defined per spatial layer.
- *
- */
-typedef struct vpx_svc_spatial_layer_sync {
-  int spatial_layer_sync[VPX_SS_MAX_LAYERS]; /**< Sync layer flags */
-  int base_layer_intra_only; /**< Flag for setting Intra-only frame on base */
-} vpx_svc_spatial_layer_sync_t;
-
-/*!\cond */
-/*!\brief VP8 encoder control function parameter type
- *
- * Defines the data types that VP8E control functions take. Note that
- * additional common controls are defined in vp8.h
- *
- */
-
-VPX_CTRL_USE_TYPE(VP8E_SET_ROI_MAP, vpx_roi_map_t *)
-#define VPX_CTRL_VP8E_SET_ROI_MAP
-VPX_CTRL_USE_TYPE(VP8E_SET_ACTIVEMAP, vpx_active_map_t *)
-#define VPX_CTRL_VP8E_SET_ACTIVEMAP
-VPX_CTRL_USE_TYPE(VP8E_SET_SCALEMODE, vpx_scaling_mode_t *)
-#define VPX_CTRL_VP8E_SET_SCALEMODE
-VPX_CTRL_USE_TYPE(VP8E_SET_CPUUSED, int)
-#define VPX_CTRL_VP8E_SET_CPUUSED
-VPX_CTRL_USE_TYPE(VP8E_SET_ENABLEAUTOALTREF, unsigned int)
-#define VPX_CTRL_VP8E_SET_ENABLEAUTOALTREF
-VPX_CTRL_USE_TYPE(VP8E_SET_NOISE_SENSITIVITY, unsigned int)
-#define VPX_CTRL_VP8E_SET_NOISE_SENSITIVITY
-VPX_CTRL_USE_TYPE(VP8E_SET_SHARPNESS, unsigned int)
-#define VPX_CTRL_VP8E_SET_SHARPNESS
-VPX_CTRL_USE_TYPE(VP8E_SET_STATIC_THRESHOLD, unsigned int)
-#define VPX_CTRL_VP8E_SET_STATIC_THRESHOLD
-VPX_CTRL_USE_TYPE(VP8E_SET_TOKEN_PARTITIONS, int) /* vp8e_token_partitions */
-#define VPX_CTRL_VP8E_SET_TOKEN_PARTITIONS
-VPX_CTRL_USE_TYPE(VP8E_GET_LAST_QUANTIZER, int *)
-#define VPX_CTRL_VP8E_GET_LAST_QUANTIZER
-VPX_CTRL_USE_TYPE(VP8E_GET_LAST_QUANTIZER_64, int *)
-#define VPX_CTRL_VP8E_GET_LAST_QUANTIZER_64
-VPX_CTRL_USE_TYPE(VP8E_SET_ARNR_MAXFRAMES, unsigned int)
-#define VPX_CTRL_VP8E_SET_ARNR_MAXFRAMES
-VPX_CTRL_USE_TYPE(VP8E_SET_ARNR_STRENGTH, unsigned int)
-#define VPX_CTRL_VP8E_SET_ARNR_STRENGTH
-VPX_CTRL_USE_TYPE_DEPRECATED(VP8E_SET_ARNR_TYPE, unsigned int)
-#define VPX_CTRL_VP8E_SET_ARNR_TYPE
-VPX_CTRL_USE_TYPE(VP8E_SET_TUNING, int) /* vp8e_tuning */
-#define VPX_CTRL_VP8E_SET_TUNING
-VPX_CTRL_USE_TYPE(VP8E_SET_CQ_LEVEL, unsigned int)
-#define VPX_CTRL_VP8E_SET_CQ_LEVEL
-VPX_CTRL_USE_TYPE(VP8E_SET_MAX_INTRA_BITRATE_PCT, unsigned int)
-#define VPX_CTRL_VP8E_SET_MAX_INTRA_BITRATE_PCT
-VPX_CTRL_USE_TYPE(VP8E_SET_FRAME_FLAGS, int)
-#define VPX_CTRL_VP8E_SET_FRAME_FLAGS
-VPX_CTRL_USE_TYPE(VP9E_SET_MAX_INTER_BITRATE_PCT, unsigned int)
-#define VPX_CTRL_VP9E_SET_MAX_INTER_BITRATE_PCT
-VPX_CTRL_USE_TYPE(VP9E_SET_GF_CBR_BOOST_PCT, unsigned int)
-#define VPX_CTRL_VP9E_SET_GF_CBR_BOOST_PCT
-VPX_CTRL_USE_TYPE(VP8E_SET_TEMPORAL_LAYER_ID, int)
-#define VPX_CTRL_VP8E_SET_TEMPORAL_LAYER_ID
-VPX_CTRL_USE_TYPE(VP8E_SET_SCREEN_CONTENT_MODE, unsigned int)
-#define VPX_CTRL_VP8E_SET_SCREEN_CONTENT_MODE
-VPX_CTRL_USE_TYPE(VP9E_SET_LOSSLESS, unsigned int)
-#define VPX_CTRL_VP9E_SET_LOSSLESS
-VPX_CTRL_USE_TYPE(VP9E_SET_TILE_COLUMNS, int)
-#define VPX_CTRL_VP9E_SET_TILE_COLUMNS
-VPX_CTRL_USE_TYPE(VP9E_SET_TILE_ROWS, int)
-#define VPX_CTRL_VP9E_SET_TILE_ROWS
-VPX_CTRL_USE_TYPE(VP9E_SET_FRAME_PARALLEL_DECODING, unsigned int)
-#define VPX_CTRL_VP9E_SET_FRAME_PARALLEL_DECODING
-VPX_CTRL_USE_TYPE(VP9E_SET_AQ_MODE, unsigned int)
-#define VPX_CTRL_VP9E_SET_AQ_MODE
-VPX_CTRL_USE_TYPE(VP9E_SET_FRAME_PERIODIC_BOOST, unsigned int)
-#define VPX_CTRL_VP9E_SET_FRAME_PERIODIC_BOOST
-VPX_CTRL_USE_TYPE(VP9E_SET_NOISE_SENSITIVITY, unsigned int)
-#define VPX_CTRL_VP9E_SET_NOISE_SENSITIVITY
-VPX_CTRL_USE_TYPE(VP9E_SET_SVC, int)
-#define VPX_CTRL_VP9E_SET_SVC
-VPX_CTRL_USE_TYPE(VP9E_SET_ROI_MAP, vpx_roi_map_t *)
-#define VPX_CTRL_VP9E_SET_ROI_MAP
-VPX_CTRL_USE_TYPE(VP9E_SET_SVC_PARAMETERS, void *)
-#define VPX_CTRL_VP9E_SET_SVC_PARAMETERS
-VPX_CTRL_USE_TYPE(VP9E_SET_SVC_LAYER_ID, vpx_svc_layer_id_t *)
-#define VPX_CTRL_VP9E_SET_SVC_LAYER_ID
-VPX_CTRL_USE_TYPE(VP9E_SET_TUNE_CONTENT, int) /* vp9e_tune_content */
-#define VPX_CTRL_VP9E_SET_TUNE_CONTENT
-VPX_CTRL_USE_TYPE(VP9E_GET_SVC_LAYER_ID, vpx_svc_layer_id_t *)
-#define VPX_CTRL_VP9E_GET_SVC_LAYER_ID
-VPX_CTRL_USE_TYPE(VP9E_REGISTER_CX_CALLBACK, void *)
-#define VPX_CTRL_VP9E_REGISTER_CX_CALLBACK
-VPX_CTRL_USE_TYPE(VP9E_SET_COLOR_SPACE, int)
-#define VPX_CTRL_VP9E_SET_COLOR_SPACE
-VPX_CTRL_USE_TYPE(VP9E_SET_MIN_GF_INTERVAL, unsigned int)
-#define VPX_CTRL_VP9E_SET_MIN_GF_INTERVAL
-VPX_CTRL_USE_TYPE(VP9E_SET_MAX_GF_INTERVAL, unsigned int)
-#define VPX_CTRL_VP9E_SET_MAX_GF_INTERVAL
-VPX_CTRL_USE_TYPE(VP9E_GET_ACTIVEMAP, vpx_active_map_t *)
-#define VPX_CTRL_VP9E_GET_ACTIVEMAP
-VPX_CTRL_USE_TYPE(VP9E_SET_COLOR_RANGE, int)
-#define VPX_CTRL_VP9E_SET_COLOR_RANGE
-VPX_CTRL_USE_TYPE(VP9E_SET_SVC_REF_FRAME_CONFIG, vpx_svc_ref_frame_config_t *)
-#define VPX_CTRL_VP9E_SET_SVC_REF_FRAME_CONFIG
-VPX_CTRL_USE_TYPE(VP9E_SET_RENDER_SIZE, int *)
-#define VPX_CTRL_VP9E_SET_RENDER_SIZE
-VPX_CTRL_USE_TYPE(VP9E_SET_TARGET_LEVEL, unsigned int)
-#define VPX_CTRL_VP9E_SET_TARGET_LEVEL
-VPX_CTRL_USE_TYPE(VP9E_SET_ROW_MT, unsigned int)
-#define VPX_CTRL_VP9E_SET_ROW_MT
-VPX_CTRL_USE_TYPE(VP9E_GET_LEVEL, int *)
-#define VPX_CTRL_VP9E_GET_LEVEL
-VPX_CTRL_USE_TYPE(VP9E_SET_ALT_REF_AQ, int)
-#define VPX_CTRL_VP9E_SET_ALT_REF_AQ
-VPX_CTRL_USE_TYPE(VP8E_SET_GF_CBR_BOOST_PCT, unsigned int)
-#define VPX_CTRL_VP8E_SET_GF_CBR_BOOST_PCT
-VPX_CTRL_USE_TYPE(VP9E_ENABLE_MOTION_VECTOR_UNIT_TEST, unsigned int)
-#define VPX_CTRL_VP9E_ENABLE_MOTION_VECTOR_UNIT_TEST
-VPX_CTRL_USE_TYPE(VP9E_SET_SVC_INTER_LAYER_PRED, unsigned int)
-#define VPX_CTRL_VP9E_SET_SVC_INTER_LAYER_PRED
-VPX_CTRL_USE_TYPE(VP9E_SET_SVC_FRAME_DROP_LAYER, vpx_svc_frame_drop_t *)
-#define VPX_CTRL_VP9E_SET_SVC_FRAME_DROP_LAYER
-VPX_CTRL_USE_TYPE(VP9E_GET_SVC_REF_FRAME_CONFIG, vpx_svc_ref_frame_config_t *)
-#define VPX_CTRL_VP9E_GET_SVC_REF_FRAME_CONFIG
-VPX_CTRL_USE_TYPE(VP9E_SET_SVC_GF_TEMPORAL_REF, unsigned int)
-#define VPX_CTRL_VP9E_SET_SVC_GF_TEMPORAL_REF
-VPX_CTRL_USE_TYPE(VP9E_SET_SVC_SPATIAL_LAYER_SYNC,
-                  vpx_svc_spatial_layer_sync_t *)
-#define VPX_CTRL_VP9E_SET_SVC_SPATIAL_LAYER_SYNC
-VPX_CTRL_USE_TYPE(VP9E_SET_TPL, int)
-#define VPX_CTRL_VP9E_SET_TPL
-VPX_CTRL_USE_TYPE(VP9E_SET_KEY_FRAME_FILTERING, int)
-#define VPX_CTRL_VP9E_SET_KEY_FRAME_FILTERING
-VPX_CTRL_USE_TYPE(VP9E_SET_POSTENCODE_DROP, unsigned int)
-#define VPX_CTRL_VP9E_SET_POSTENCODE_DROP
-VPX_CTRL_USE_TYPE(VP9E_SET_DELTA_Q_UV, int)
-#define VPX_CTRL_VP9E_SET_DELTA_Q_UV
-VPX_CTRL_USE_TYPE(VP9E_SET_DISABLE_OVERSHOOT_MAXQ_CBR, int)
-#define VPX_CTRL_VP9E_SET_DISABLE_OVERSHOOT_MAXQ_CBR
-VPX_CTRL_USE_TYPE(VP9E_SET_DISABLE_LOOPFILTER, int)
-#define VPX_CTRL_VP9E_SET_DISABLE_LOOPFILTER
-VPX_CTRL_USE_TYPE(VP9E_SET_EXTERNAL_RATE_CONTROL, vpx_rc_funcs_t *)
-#define VPX_CTRL_VP9E_SET_EXTERNAL_RATE_CONTROL
-VPX_CTRL_USE_TYPE(VP9E_SET_RTC_EXTERNAL_RATECTRL, int)
-#define VPX_CTRL_VP9E_SET_RTC_EXTERNAL_RATECTRL
-VPX_CTRL_USE_TYPE(VP9E_GET_LOOPFILTER_LEVEL, int *)
-#define VPX_CTRL_VP9E_GET_LOOPFILTER_LEVEL
-VPX_CTRL_USE_TYPE(VP9E_GET_LAST_QUANTIZER_SVC_LAYERS, int *)
-#define VPX_CTRL_VP9E_GET_LAST_QUANTIZER_SVC_LAYERS
-VPX_CTRL_USE_TYPE(VP8E_SET_RTC_EXTERNAL_RATECTRL, int)
-#define VPX_CTRL_VP8E_SET_RTC_EXTERNAL_RATECTRL
-VPX_CTRL_USE_TYPE(VP9E_SET_QUANTIZER_ONE_PASS, int)
-#define VPX_CTRL_VP9E_SET_QUANTIZER_ONE_PASS
-
-/*!\endcond */
-/*! @} - end defgroup vp8_encoder */
-#ifdef __cplusplus
-}  // extern "C"
-#endif
-
-#endif  // VPX_VPX_VP8CX_H_