@pproenca/ffmpeg-darwin-x64-gpl 0.1.7

package/include/aom/aomcx.h

@@ -0,0 +1,2288 @@
+/*
+ * Copyright (c) 2016, Alliance for Open Media. All rights reserved.
+ *
+ * This source code is subject to the terms of the BSD 2 Clause License and
+ * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License
+ * was not distributed with this source code in the LICENSE file, you can
+ * obtain it at www.aomedia.org/license/software. If the Alliance for Open
+ * Media Patent License 1.0 was not distributed with this source code in the
+ * PATENTS file, you can obtain it at www.aomedia.org/license/patent.
+ */
+#ifndef AOM_AOM_AOMCX_H_
+#define AOM_AOM_AOMCX_H_
+
+/*!\defgroup aom_encoder AOMedia AOM/AV1 Encoder
+ * \ingroup aom
+ *
+ * @{
+ */
+#include "aom/aom.h"
+#include "aom/aom_encoder.h"
+#include "aom/aom_external_partition.h"
+
+/*!\file
+ * \brief Provides definitions for using AOM or AV1 encoder algorithm within the
+ *        aom Codec Interface.
+ *
+ * Several interfaces are excluded with CONFIG_REALTIME_ONLY build:
+ * Global motion
+ * Warped motion
+ * OBMC
+ * TPL model
+ * Loop restoration
+ *
+ * The following features are also disabled with CONFIG_REALTIME_ONLY:
+ * AV1E_SET_QUANT_B_ADAPT
+ * CNN
+ * 4X rectangular blocks
+ * 4X rectangular transform in intra prediction
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*!\name Algorithm interface for AV1
+ *
+ * This interface provides the capability to encode raw AV1 streams.
+ *@{
+ */
+
+/*!\brief A single instance of the AV1 encoder.
+ *\deprecated This access mechanism is provided for backwards compatibility;
+ * prefer aom_codec_av1_cx().
+ */
+extern aom_codec_iface_t aom_codec_av1_cx_algo;
+
+/*!\brief The interface to the AV1 encoder.
+ */
+extern aom_codec_iface_t *aom_codec_av1_cx(void);
+/*!@} - end algorithm interface member group */
+
+/*
+ * Algorithm Flags
+ */
+
+/*!\brief Don't reference the last frame
+ *
+ * When this flag is set, the encoder will not use the last frame as a
+ * predictor. When not set, the encoder will choose whether to use the
+ * last frame or not automatically.
+ */
+#define AOM_EFLAG_NO_REF_LAST (1 << 16)
+/*!\brief Don't reference the last2 frame
+ *
+ * When this flag is set, the encoder will not use the last2 frame as a
+ * predictor. When not set, the encoder will choose whether to use the
+ * last2 frame or not automatically.
+ */
+#define AOM_EFLAG_NO_REF_LAST2 (1 << 17)
+/*!\brief Don't reference the last3 frame
+ *
+ * When this flag is set, the encoder will not use the last3 frame as a
+ * predictor. When not set, the encoder will choose whether to use the
+ * last3 frame or not automatically.
+ */
+#define AOM_EFLAG_NO_REF_LAST3 (1 << 18)
+/*!\brief Don't reference the golden frame
+ *
+ * When this flag is set, the encoder will not use the golden frame as a
+ * predictor. When not set, the encoder will choose whether to use the
+ * golden frame or not automatically.
+ */
+#define AOM_EFLAG_NO_REF_GF (1 << 19)
+
+/*!\brief Don't reference the alternate reference frame
+ *
+ * When this flag is set, the encoder will not use the alt ref frame as a
+ * predictor. When not set, the encoder will choose whether to use the
+ * alt ref frame or not automatically.
+ */
+#define AOM_EFLAG_NO_REF_ARF (1 << 20)
+/*!\brief Don't reference the bwd reference frame
+ *
+ * When this flag is set, the encoder will not use the bwd ref frame as a
+ * predictor. When not set, the encoder will choose whether to use the
+ * bwd ref frame or not automatically.
+ */
+#define AOM_EFLAG_NO_REF_BWD (1 << 21)
+/*!\brief Don't reference the alt2 reference frame
+ *
+ * When this flag is set, the encoder will not use the alt2 ref frame as a
+ * predictor. When not set, the encoder will choose whether to use the
+ * alt2 ref frame or not automatically.
+ */
+#define AOM_EFLAG_NO_REF_ARF2 (1 << 22)
+
+/*!\brief Don't update the last frame
+ *
+ * When this flag is set, the encoder will not update the last frame with
+ * the contents of the current frame.
+ */
+#define AOM_EFLAG_NO_UPD_LAST (1 << 23)
+
+/*!\brief Don't update the golden frame
+ *
+ * When this flag is set, the encoder will not update the golden frame with
+ * the contents of the current frame.
+ */
+#define AOM_EFLAG_NO_UPD_GF (1 << 24)
+
+/*!\brief Don't update the alternate reference frame
+ *
+ * When this flag is set, the encoder will not update the alt ref frame with
+ * the contents of the current frame.
+ */
+#define AOM_EFLAG_NO_UPD_ARF (1 << 25)
+/*!\brief Disable entropy update
+ *
+ * When this flag is set, the encoder will not update its internal entropy
+ * model based on the entropy of this frame.
+ */
+#define AOM_EFLAG_NO_UPD_ENTROPY (1 << 26)
+/*!\brief Disable ref frame mvs
+ *
+ * When this flag is set, the encoder will not allow frames to
+ * be encoded using mfmv.
+ */
+#define AOM_EFLAG_NO_REF_FRAME_MVS (1 << 27)
+/*!\brief Enable error resilient frame
+ *
+ * When this flag is set, the encoder will code frames as error
+ * resilient.
+ */
+#define AOM_EFLAG_ERROR_RESILIENT (1 << 28)
+/*!\brief Enable s frame mode
+ *
+ * When this flag is set, the encoder will code frames as an
+ * s frame.
+ */
+#define AOM_EFLAG_SET_S_FRAME (1 << 29)
+/*!\brief Force primary_ref_frame to PRIMARY_REF_NONE
+ *
+ * When this flag is set, the encoder will set a frame's primary_ref_frame
+ * to PRIMARY_REF_NONE
+ */
+#define AOM_EFLAG_SET_PRIMARY_REF_NONE (1 << 30)
+
+/*!\brief AVx encoder control functions
+ *
+ * This set of macros define the control functions available for AVx
+ * encoder interface.
+ * The range of encode control ID is 7-229(max).
+ *
+ * \sa #aom_codec_control(aom_codec_ctx_t *ctx, int ctrl_id, ...)
+ */
+enum aome_enc_control_id {
+  /*!\brief Codec control function to set which reference frame encoder can use,
+   * int parameter.
+   */
+  AOME_USE_REFERENCE = 7,
+
+  /*!\brief Codec control function to pass an ROI map to encoder, aom_roi_map_t*
+   * parameter.
+   */
+  AOME_SET_ROI_MAP = 8,
+
+  /*!\brief Codec control function to pass an Active map to encoder,
+   * aom_active_map_t* parameter.
+   */
+  AOME_SET_ACTIVEMAP = 9,
+
+  /* NOTE: enum 10 unused */
+
+  /*!\brief Codec control function to set encoder scaling mode for the next
+   * frame to be coded, aom_scaling_mode_t* parameter.
+   */
+  AOME_SET_SCALEMODE = 11,
+
+  /*!\brief Codec control function to set encoder spatial layer id, int
+   * parameter.
+   */
+  AOME_SET_SPATIAL_LAYER_ID = 12,
+
+  /*!\brief Codec control function to set encoder internal speed settings,
+   * int parameter
+   *
+   * Changes in this value influences the complexity of algorithms used in
+   * encoding process, values greater than 0 will increase encoder speed at
+   * the expense of quality.
+   *
+   * Valid range: 0..11. 0 runs the slowest, and 11 runs the fastest;
+   * quality improves as speed decreases (since more compression
+   * possibilities are explored).
+   *
+   * NOTE: 10 and 11 are only allowed in AOM_USAGE_REALTIME. In
+   * AOM_USAGE_GOOD_QUALITY and AOM_USAGE_ALL_INTRA, 9 is the highest allowed
+   * value. However, AOM_USAGE_GOOD_QUALITY treats 7..9 the same as 6. Also,
+   * AOM_USAGE_REALTIME treats 0..4 the same as 5.
+   */
+  AOME_SET_CPUUSED = 13,
+
+  /*!\brief Codec control function to enable automatic set and use alf frames,
+   * unsigned int parameter
+   *
+   * - 0 = disable
+   * - 1 = enable (default)
+   */
+  AOME_SET_ENABLEAUTOALTREF = 14,
+
+  /* NOTE: enum 15 unused */
+
+  /*!\brief Codec control function to set the sharpness parameter,
+   * unsigned int parameter.
+   *
+   * This parameter controls the level at which rate-distortion optimization of
+   * transform coefficients favors sharpness in the block.
+   *
+   * Valid range: 0..7. The default is 0.
+   *
+   * Values 1-7 will avoid eob and skip block optimization and will change
+   * rdmult in favor of block sharpness.
+   *
+   * In all-intra mode: it also sets the `loop_filter_sharpness` syntax element
+   * in the bitstream. Larger values increasingly reduce how much the filtering
+   * can change the sample values on block edges to favor perceived sharpness.
+   */
+  AOME_SET_SHARPNESS = AOME_SET_ENABLEAUTOALTREF + 2,  // 16
+
+  /*!\brief Codec control function to set the threshold for MBs treated static,
+   * unsigned int parameter
+   */
+  AOME_SET_STATIC_THRESHOLD = 17,
+
+  /* NOTE: enum 18 unused */
+
+  /*!\brief Codec control function to get last quantizer chosen by the encoder,
+   * int* parameter
+   *
+   * Return value uses internal quantizer scale defined by the codec.
+   */
+  AOME_GET_LAST_QUANTIZER = AOME_SET_STATIC_THRESHOLD + 2,  // 19
+
+  /*!\brief Codec control function to get last quantizer chosen by the encoder,
+   * int* parameter
+   *
+   * Return value uses the 0..63 scale as used by the rc_*_quantizer config
+   * parameters.
+   */
+  AOME_GET_LAST_QUANTIZER_64 = 20,
+
+  /*!\brief Codec control function to set the max no of frames to create arf,
+   * unsigned int parameter
+   */
+  AOME_SET_ARNR_MAXFRAMES = 21,
+
+  /*!\brief Codec control function to set the filter strength for the arf,
+   * unsigned int parameter
+   */
+  AOME_SET_ARNR_STRENGTH = 22,
+
+  /* NOTE: enum 23 unused */
+
+  /*!\brief Codec control function to set visual tuning, aom_tune_metric (int)
+   * parameter
+   *
+   * The default is AOM_TUNE_PSNR.
+   */
+  AOME_SET_TUNING = AOME_SET_ARNR_STRENGTH + 2,  // 24
+
+  /*!\brief Codec control function to set constrained / constant quality level,
+   * unsigned int parameter
+   *
+   * Valid range: 0..63
+   *
+   * \attention For this value to be used aom_codec_enc_cfg_t::rc_end_usage
+   *            must be set to #AOM_CQ or #AOM_Q.
+   */
+  AOME_SET_CQ_LEVEL = 25,
+
+  /*!\brief Codec control function to set max data rate for intra frames,
+   * unsigned int parameter
+   *
+   * This value controls additional clamping on the maximum size of a
+   * keyframe. It is expressed as a percentage of the average
+   * per-frame bitrate, with the special (and default) value 0 meaning
+   * unlimited, or no additional clamping beyond the codec's built-in
+   * algorithm.
+   *
+   * For example, to allocate no more than 4.5 frames worth of bitrate
+   * to a keyframe, set this to 450.
+   */
+  AOME_SET_MAX_INTRA_BITRATE_PCT = 26,
+
+  /*!\brief Codec control function to set number of spatial layers, int
+   * parameter
+   */
+  AOME_SET_NUMBER_SPATIAL_LAYERS = 27,
+
+  /*!\brief Codec control function to set max data rate for inter frames,
+   * unsigned int parameter
+   *
+   * This value controls additional clamping on the maximum size of an
+   * inter frame. It is expressed as a percentage of the average
+   * per-frame bitrate, with the special (and default) value 0 meaning
+   * unlimited, or no additional clamping beyond the codec's built-in
+   * algorithm.
+   *
+   * For example, to allow no more than 4.5 frames worth of bitrate
+   * to an inter frame, set this to 450.
+   */
+  AV1E_SET_MAX_INTER_BITRATE_PCT = AOME_SET_MAX_INTRA_BITRATE_PCT + 2,  // 28
+
+  /*!\brief Boost percentage for Golden Frame in CBR mode, unsigned int
+   * parameter
+   *
+   * This value controls the amount of boost given to Golden Frame in
+   * CBR mode. It is expressed as a percentage of the average
+   * per-frame bitrate, with the special (and default) value 0 meaning
+   * the feature is off, i.e., no golden frame boost in CBR mode and
+   * average bitrate target is used.
+   *
+   * For example, to allow 100% more bits, i.e, 2X, in a golden frame
+   * than average frame, set this to 100.
+   */
+  AV1E_SET_GF_CBR_BOOST_PCT = 29,
+
+  /* NOTE: enum 30 unused */
+
+  /*!\brief Codec control function to set lossless encoding mode, unsigned int
+   * parameter
+   *
+   * AV1 can operate in lossless encoding mode, in which the bitstream
+   * produced will be able to decode and reconstruct a perfect copy of
+   * input source.
+   *
+   * - 0 = normal coding mode, may be lossy (default)
+   * - 1 = lossless coding mode
+   */
+  AV1E_SET_LOSSLESS = AV1E_SET_GF_CBR_BOOST_PCT + 2,  // 31
+
+  /*!\brief Codec control function to enable the row based multi-threading
+   * of the encoder, unsigned int parameter
+   *
+   * - 0 = disable
+   * - 1 = enable (default)
+   */
+  AV1E_SET_ROW_MT = 32,
+
+  /*!\brief Codec control function to set number of tile columns. unsigned int
+   * parameter
+   *
+   * In encoding and decoding, AV1 allows an input image frame be partitioned
+   * into separate vertical tile columns, which can be encoded or decoded
+   * independently. This enables easy implementation of parallel encoding and
+   * decoding. The parameter for this control describes the number of tile
+   * columns (in log2 units), which has a valid range of [0, 6]:
+   * \verbatim
+                 0 = 1 tile column
+                 1 = 2 tile columns
+                 2 = 4 tile columns
+                 .....
+                 n = 2**n tile columns
+     \endverbatim
+   * By default, the value is 0, i.e. one single column tile for entire image.
+   */
+  AV1E_SET_TILE_COLUMNS = 33,
+
+  /*!\brief Codec control function to set number of tile rows, unsigned int
+   * parameter
+   *
+   * In encoding and decoding, AV1 allows an input image frame be partitioned
+   * into separate horizontal tile rows, which can be encoded or decoded
+   * independently. The parameter for this control describes the number of tile
+   * rows (in log2 units), which has a valid range of [0, 6]:
+   * \verbatim
+                0 = 1 tile row
+                1 = 2 tile rows
+                2 = 4 tile rows
+                .....
+                n = 2**n tile rows
+   \endverbatim
+   * By default, the value is 0, i.e. one single row tile for entire image.
+   */
+  AV1E_SET_TILE_ROWS = 34,
+
+  /*!\brief Codec control function to enable RDO modulated by frame temporal
+   * dependency, unsigned int parameter
+   *
+   * - 0 = disable
+   * - 1 = enable (default)
+   *
+   * \note Excluded from CONFIG_REALTIME_ONLY build.
+   */
+  AV1E_SET_ENABLE_TPL_MODEL = 35,
+
+  /*!\brief Codec control function to enable temporal filtering on key frame,
+   * unsigned int parameter
+   *
+   * - 0 = disable
+   * - 1 = enable without overlay (default)
+   * - 2 = enable with overlay
+   */
+  AV1E_SET_ENABLE_KEYFRAME_FILTERING = 36,
+
+  /*!\brief Codec control function to enable frame parallel decoding feature,
+   * unsigned int parameter
+   *
+   * AV1 has a bitstream feature to reduce decoding dependency between frames
+   * by turning off backward update of probability context used in encoding
+   * and decoding. This allows staged parallel processing of more than one
+   * video frames in the decoder. This control function provides a means to
+   * turn this feature on or off for bitstreams produced by encoder.
+   *
+   * - 0 = disable (default)
+   * - 1 = enable
+   */
+  AV1E_SET_FRAME_PARALLEL_DECODING = 37,
+
+  /*!\brief Codec control function to enable error_resilient_mode, int parameter
+   *
+   * AV1 has a bitstream feature to guarantee parsability of a frame
+   * by turning on the error_resilient_decoding mode, even though the
+   * reference buffers are unreliable or not received.
+   *
+   * - 0 = disable (default)
+   * - 1 = enable
+   */
+  AV1E_SET_ERROR_RESILIENT_MODE = 38,
+
+  /*!\brief Codec control function to enable s_frame_mode, int parameter
+   *
+   * AV1 has a bitstream feature to designate certain frames as S-frames,
+   * from where we can switch to a different stream,
+   * even though the reference buffers may not be exactly identical.
+   *
+   * - 0 = disable (default)
+   * - 1 = enable
+   */
+  AV1E_SET_S_FRAME_MODE = 39,
+
+  /*!\brief Codec control function to set adaptive quantization mode, unsigned
+   * int parameter
+   *
+   * AV1 has a segment based feature that allows encoder to adaptively change
+   * quantization parameter for each segment within a frame to improve the
+   * subjective quality. This control makes encoder operate in one of the
+   * several AQ modes supported.
+   *
+   * - 0 = disable (default)
+   * - 1 = variance
+   * - 2 = complexity
+   * - 3 = cyclic refresh
+   */
+  AV1E_SET_AQ_MODE = 40,
+
+  /*!\brief Codec control function to enable/disable periodic Q boost, unsigned
+   * int parameter
+   *
+   * One AV1 encoder speed feature is to enable quality boost by lowering
+   * frame level Q periodically. This control function provides a means to
+   * turn on/off this feature.
+   *
+   * - 0 = disable (default)
+   * - 1 = enable
+   */
+  AV1E_SET_FRAME_PERIODIC_BOOST = 41,
+
+  /*!\brief Codec control function to set noise sensitivity, unsigned int
+   * parameter
+   *
+   * - 0 = disable (default)
+   * - 1 = enable (Y only)
+   */
+  AV1E_SET_NOISE_SENSITIVITY = 42,
+
+  /*!\brief Codec control function to set content type, aom_tune_content
+   * parameter
+   *
+   *  - AOM_CONTENT_DEFAULT = Regular video content (default)
+   *  - AOM_CONTENT_SCREEN  = Screen capture content
+   *  - AOM_CONTENT_FILM = Film content
+   */
+  AV1E_SET_TUNE_CONTENT = 43,
+
+  /*!\brief Codec control function to set CDF update mode, unsigned int
+   * parameter
+   *
+   *  - 0: no update
+   *  - 1: update on every frame (default)
+   *  - 2: selectively update
+   */
+  AV1E_SET_CDF_UPDATE_MODE = 44,
+
+  /*!\brief Codec control function to set color space info, int parameter
+   *
+   *  - 0 = For future use
+   *  - 1 = BT.709
+   *  - 2 = Unspecified (default)
+   *  - 3 = For future use
+   *  - 4 = BT.470 System M (historical)
+   *  - 5 = BT.470 System B, G (historical)
+   *  - 6 = BT.601
+   *  - 7 = SMPTE 240
+   *  - 8 = Generic film (color filters using illuminant C)
+   *  - 9 = BT.2020, BT.2100
+   *  - 10 = SMPTE 428 (CIE 1921 XYZ)
+   *  - 11 = SMPTE RP 431-2
+   *  - 12 = SMPTE EG 432-1
+   *  - 13..21 = For future use
+   *  - 22 = EBU Tech. 3213-E
+   *  - 23 = For future use
+   */
+  AV1E_SET_COLOR_PRIMARIES = 45,
+
+  /*!\brief Codec control function to set transfer function info, int parameter
+   *
+   * - 0 = For future use
+   * - 1 = BT.709
+   * - 2 = Unspecified (default)
+   * - 3 = For future use
+   * - 4 = BT.470 System M (historical)
+   * - 5 = BT.470 System B, G (historical)
+   * - 6 = BT.601
+   * - 7 = SMPTE 240 M
+   * - 8 = Linear
+   * - 9 = Logarithmic (100 : 1 range)
+   * - 10 = Logarithmic (100 * Sqrt(10) : 1 range)
+   * - 11 = IEC 61966-2-4
+   * - 12 = BT.1361
+   * - 13 = sRGB or sYCC
+   * - 14 = BT.2020 10-bit systems
+   * - 15 = BT.2020 12-bit systems
+   * - 16 = SMPTE ST 2084, ITU BT.2100 PQ
+   * - 17 = SMPTE ST 428
+   * - 18 = BT.2100 HLG, ARIB STD-B67
+   * - 19 = For future use
+   */
+  AV1E_SET_TRANSFER_CHARACTERISTICS = 46,
+
+  /*!\brief Codec control function to set transfer function info, int parameter
+   *
+   * - 0 = Identity matrix
+   * - 1 = BT.709
+   * - 2 = Unspecified (default)
+   * - 3 = For future use
+   * - 4 = US FCC 73.628
+   * - 5 = BT.470 System B, G (historical)
+   * - 6 = BT.601
+   * - 7 = SMPTE 240 M
+   * - 8 = YCgCo
+   * - 9 = BT.2020 non-constant luminance, BT.2100 YCbCr
+   * - 10 = BT.2020 constant luminance
+   * - 11 = SMPTE ST 2085 YDzDx
+   * - 12 = Chromaticity-derived non-constant luminance
+   * - 13 = Chromaticity-derived constant luminance
+   * - 14 = BT.2100 ICtCp
+   * - 15 = For future use
+   */
+  AV1E_SET_MATRIX_COEFFICIENTS = 47,
+
+  /*!\brief Codec control function to set chroma 4:2:0 sample position info,
+   * aom_chroma_sample_position_t parameter
+   *
+   * AOM_CSP_UNKNOWN is default
+   */
+  AV1E_SET_CHROMA_SAMPLE_POSITION = 48,
+
+  /*!\brief Codec control function to set minimum interval between GF/ARF
+   * frames, unsigned int parameter
+   *
+   * By default the value is set as 4.
+   */
+  AV1E_SET_MIN_GF_INTERVAL = 49,
+
+  /*!\brief Codec control function to set minimum interval between GF/ARF
+   * frames, unsigned int parameter
+   *
+   * By default the value is set as 16.
+   */
+  AV1E_SET_MAX_GF_INTERVAL = 50,
+
+  /*!\brief Codec control function to get an active map back from the encoder,
+    aom_active_map_t* parameter
+   */
+  AV1E_GET_ACTIVEMAP = 51,
+
+  /*!\brief Codec control function to set color range bit, int parameter
+   *
+   * - 0 = Limited range, 16..235 or HBD equivalent (default)
+   * - 1 = Full range, 0..255 or HBD equivalent
+   */
+  AV1E_SET_COLOR_RANGE = 52,
+
+  /*!\brief Codec control function to set intended rendering image size,
+   * int32_t[2] parameter
+   *
+   * By default, this is identical to the image size in pixels.
+   */
+  AV1E_SET_RENDER_SIZE = 53,
+
+  /*!\brief Control to set target sequence level index for a certain operating
+   * point (OP), int parameter
+   * Possible values are in the form of "ABxy".
+   *  - AB: OP index.
+   *  - xy: Target level index for the OP. Possible values are:
+   *    + 0~27: corresponding to level 2.0 ~ 8.3. Note:
+   *      > Levels 2.2 (2), 2.3 (3), 3.2 (6), 3.3 (7), 4.2 (10) & 4.3 (11) are
+   *        undefined.
+   *      > Levels 7.x and 8.x (20~27) are in draft status, available under the
+   *        config flag CONFIG_CWG_C013.
+   *    + 31: maximum parameters level, no level-based constraints.
+   *    + 32: keep level stats only for level monitoring.
+   *
+   * E.g.:
+   * - "0" means target level index 0 (2.0) for the 0th OP;
+   * - "109" means target level index 9 (4.1) for the 1st OP;
+   * - "1019" means target level index 19 (6.3) for the 10th OP.
+   *
+   * If the target level is not specified for an OP, the maximum parameters
+   * level of 31 is used as default.
+   */
+  AV1E_SET_TARGET_SEQ_LEVEL_IDX = 54,
+
+  /*!\brief Codec control function to get sequence level index for each
+   * operating point. int* parameter. There can be at most 32 operating points.
+   * The results will be written into a provided integer array of sufficient
+   * size.
+   */
+  AV1E_GET_SEQ_LEVEL_IDX = 55,
+
+  /*!\brief Codec control function to set intended superblock size, unsigned int
+   * parameter
+   *
+   * By default, the superblock size is determined separately for each
+   * frame by the encoder.
+   */
+  AV1E_SET_SUPERBLOCK_SIZE = 56,
+
+  /*!\brief Codec control function to enable automatic set and use of
+   * bwd-pred frames, unsigned int parameter
+   *
+   * - 0 = disable (default)
+   * - 1 = enable
+   */
+  AOME_SET_ENABLEAUTOBWDREF = 57,
+
+  /*!\brief Codec control function to encode with CDEF, unsigned int parameter
+   *
+   * CDEF is the constrained directional enhancement filter which is an
+   * in-loop filter aiming to remove coding artifacts
+   *
+   * - 0 = disable
+   * - 1 = enable for all frames (default)
+   * - 2 = disable for non-reference frames
+   * - 3 = enable adaptively based on frame qindex
+   */
+  AV1E_SET_ENABLE_CDEF = 58,
+
+  /*!\brief Codec control function to encode with Loop Restoration Filter,
+   * unsigned int parameter
+   *
+   * - 0 = disable
+   * - 1 = enable (default)
+   *
+   * \note Excluded from CONFIG_REALTIME_ONLY build.
+   */
+  AV1E_SET_ENABLE_RESTORATION = 59,
+
+  /*!\brief Codec control function to force video mode, unsigned int parameter
+   *
+   * - 0 = do not force video mode (default)
+   * - 1 = force video mode even for a single frame
+   */
+  AV1E_SET_FORCE_VIDEO_MODE = 60,
+
+  /*!\brief Codec control function to predict with OBMC mode, unsigned int
+   * parameter
+   *
+   * - 0 = disable
+   * - 1 = enable (default)
+   *
+   * \note Excluded from CONFIG_REALTIME_ONLY build.
+   */
+  AV1E_SET_ENABLE_OBMC = 61,
+
+  /*!\brief Codec control function to encode without trellis quantization,
+   * unsigned int parameter
+   *
+   * - 0 = apply trellis quantization (default)
+   * - 1 = do not apply trellis quantization
+   * - 2 = disable trellis quantization in rd search
+   * - 3 = disable trellis quantization in estimate yrd
+   */
+  AV1E_SET_DISABLE_TRELLIS_QUANT = 62,
+
+  /*!\brief Codec control function to encode with quantisation matrices,
+   * unsigned int parameter
+   *
+   * AOM can operate with default quantisation matrices dependent on
+   * quantisation level and block type.
+   *
+   * - 0 = disable (default)
+   * - 1 = enable
+   */
+  AV1E_SET_ENABLE_QM = 63,
+
+  /*!\brief Codec control function to set the min quant matrix flatness,
+   * unsigned int parameter
+   *
+   * AOM can operate with different ranges of quantisation matrices.
+   * As quantisation levels increase, the matrices get flatter. This
+   * control sets the minimum level of flatness from which the matrices
+   * are determined.
+   *
+   * By default, the encoder sets this minimum at level 5 (4 in all intra
+   * mode).
+   */
+  AV1E_SET_QM_MIN = 64,
+
+  /*!\brief Codec control function to set the max quant matrix flatness,
+   * unsigned int parameter
+   *
+   * AOM can operate with different ranges of quantisation matrices.
+   * As quantisation levels increase, the matrices get flatter. This
+   * control sets the maximum level of flatness possible.
+   *
+   * By default, the encoder sets this maximum at level 9 (10 in all intra
+   * mode)
+   */
+  AV1E_SET_QM_MAX = 65,
+
+  /*!\brief Codec control function to set the min quant matrix flatness,
+   * unsigned int parameter
+   *
+   * AOM can operate with different ranges of quantisation matrices.
+   * As quantisation levels increase, the matrices get flatter. This
+   * control sets the flatness for luma (Y).
+   *
+   * By default, the encoder sets this minimum at half the available
+   * range.
+   */
+  AV1E_SET_QM_Y = 66,
+
+  /*!\brief Codec control function to set the min quant matrix flatness,
+   * unsigned int parameter
+   *
+   * AOM can operate with different ranges of quantisation matrices.
+   * As quantisation levels increase, the matrices get flatter. This
+   * control sets the flatness for chroma (U).
+   *
+   * By default, the encoder sets this minimum at half the available
+   * range.
+   */
+  AV1E_SET_QM_U = 67,
+
+  /*!\brief Codec control function to set the min quant matrix flatness,
+   * unsigned int parameter
+   *
+   * AOM can operate with different ranges of quantisation matrices.
+   * As quantisation levels increase, the matrices get flatter. This
+   * control sets the flatness for chrome (V).
+   *
+   * By default, the encoder sets this minimum at half the available
+   * range.
+   */
+  AV1E_SET_QM_V = 68,
+
+  /* NOTE: enum 69 unused */
+
+  /*!\brief Codec control function to set a maximum number of tile groups,
+   * unsigned int parameter
+   *
+   * This will set the maximum number of tile groups. This will be
+   * overridden if an MTU size is set. The default value is 1.
+   */
+  AV1E_SET_NUM_TG = 70,
+
+  /*!\brief Codec control function to set an MTU size for a tile group, unsigned
+   * int parameter
+   *
+   * This will set the maximum number of bytes in a tile group. This can be
+   * exceeded only if a single tile is larger than this amount.
+   *
+   * By default, the value is 0, in which case a fixed number of tile groups
+   * is used.
+   */
+  AV1E_SET_MTU = 71,
+
+  /* NOTE: enum 72 unused */
+
+  /*!\brief Codec control function to enable/disable rectangular partitions, int
+   * parameter
+   *
+   * - 0 = disable
+   * - 1 = enable (default)
+   */
+  AV1E_SET_ENABLE_RECT_PARTITIONS = 73,
+
+  /*!\brief Codec control function to enable/disable AB partitions, int
+   * parameter
+   *
+   * - 0 = disable
+   * - 1 = enable (default)
+   */
+  AV1E_SET_ENABLE_AB_PARTITIONS = 74,
+
+  /*!\brief Codec control function to enable/disable 1:4 and 4:1 partitions, int
+   * parameter
+   *
+   * - 0 = disable
+   * - 1 = enable (default)
+   */
+  AV1E_SET_ENABLE_1TO4_PARTITIONS = 75,
+
+  /*!\brief Codec control function to set min partition size, int parameter
+   *
+   * min_partition_size is applied to both width and height of the partition.
+   * i.e, both width and height of a partition can not be smaller than
+   * the min_partition_size, except the partition at the picture boundary.
+   *
+   * Valid values: [4, 8, 16, 32, 64, 128]. The default value is 4 for
+   * 4x4.
+   */
+  AV1E_SET_MIN_PARTITION_SIZE = 76,
+
+  /*!\brief Codec control function to set max partition size, int parameter
+   *
+   * max_partition_size is applied to both width and height of the partition.
+   * i.e, both width and height of a partition can not be larger than
+   * the max_partition_size.
+   *
+   * Valid values:[4, 8, 16, 32, 64, 128] The default value is 128 for
+   * 128x128.
+   */
+  AV1E_SET_MAX_PARTITION_SIZE = 77,
+
+  /*!\brief Codec control function to turn on / off intra edge filter
+   * at sequence level, int parameter
+   *
+   * - 0 = disable
+   * - 1 = enable (default)
+   */
+  AV1E_SET_ENABLE_INTRA_EDGE_FILTER = 78,
+
+  /*!\brief Codec control function to turn on / off frame order hint (int
+   * parameter). Affects: joint compound mode, motion field motion vector,
+   * ref frame sign bias
+   *
+   * - 0 = disable
+   * - 1 = enable (default)
+   */
+  AV1E_SET_ENABLE_ORDER_HINT = 79,
+
+  /*!\brief Codec control function to turn on / off 64-length transforms, int
+   * parameter
+   *
+   * This will enable or disable usage of length 64 transforms in any
+   * direction.
+   *
+   * - 0 = disable
+   * - 1 = enable (default)
+   */
+  AV1E_SET_ENABLE_TX64 = 80,
+
+  /*!\brief Codec control function to turn on / off flip and identity
+   * transforms, int parameter
+   *
+   * This will enable or disable usage of flip and identity transform
+   * types in any direction. If enabled, this includes:
+   * - FLIPADST_DCT
+   * - DCT_FLIPADST
+   * - FLIPADST_FLIPADST
+   * - ADST_FLIPADST
+   * - FLIPADST_ADST
+   * - IDTX
+   * - V_DCT
+   * - H_DCT
+   * - V_ADST
+   * - H_ADST
+   * - V_FLIPADST
+   * - H_FLIPADST
+   *
+   * Valid values:
+   * - 0 = disable
+   * - 1 = enable (default)
+   */
+  AV1E_SET_ENABLE_FLIP_IDTX = 81,
+
+  /*!\brief Codec control function to turn on / off rectangular transforms, int
+   * parameter
+   *
+   * This will enable or disable usage of rectangular transforms. NOTE:
+   * Rectangular transforms only enabled when corresponding rectangular
+   * partitions are.
+   *
+   * - 0 = disable
+   * - 1 = enable (default)
+   */
+  AV1E_SET_ENABLE_RECT_TX = 82,
+
+  /*!\brief Codec control function to turn on / off dist-wtd compound mode
+   * at sequence level, int parameter
+   *
+   * This will enable or disable distance-weighted compound mode.
+   * \attention If AV1E_SET_ENABLE_ORDER_HINT is 0, then this flag is forced
+   * to 0.
+   *
+   * - 0 = disable
+   * - 1 = enable (default)
+   */
+  AV1E_SET_ENABLE_DIST_WTD_COMP = 83,
+
+  /*!\brief Codec control function to turn on / off ref frame mvs (mfmv) usage
+   * at sequence level, int parameter
+   *
+   * \attention If AV1E_SET_ENABLE_ORDER_HINT is 0, then this flag is forced
+   * to 0.
+   *
+   * - 0 = disable
+   * - 1 = enable (default)
+   */
+  AV1E_SET_ENABLE_REF_FRAME_MVS = 84,
+
+  /*!\brief Codec control function to set temporal mv prediction
+   * enabling/disabling at frame level, int parameter
+   *
+   * \attention If AV1E_SET_ENABLE_REF_FRAME_MVS is 0, then this flag is
+   * forced to 0.
+   *
+   * - 0 = disable
+   * - 1 = enable (default)
+   */
+  AV1E_SET_ALLOW_REF_FRAME_MVS = 85,
+
+  /*!\brief Codec control function to turn on / off dual interpolation filter
+   * for a sequence, int parameter
+   *
+   * - 0 = disable
+   * - 1 = enable
+   */
+  AV1E_SET_ENABLE_DUAL_FILTER = 86,
+
+  /*!\brief Codec control function to turn on / off delta quantization in chroma
+   * planes for a sequence, int parameter
+   *
+   * - 0 = disable (default)
+   * - 1 = enable
+   */
+  AV1E_SET_ENABLE_CHROMA_DELTAQ = 87,
+
+  /*!\brief Codec control function to turn on / off masked compound usage
+   * (wedge and diff-wtd compound modes) for a sequence, int parameter
+   *
+   * - 0 = disable
+   * - 1 = enable (default)
+   */
+  AV1E_SET_ENABLE_MASKED_COMP = 88,
+
+  /*!\brief Codec control function to turn on / off one sided compound usage
+   * for a sequence, int parameter
+   *
+   * - 0 = disable
+   * - 1 = enable (default)
+   */
+  AV1E_SET_ENABLE_ONESIDED_COMP = 89,
+
+  /*!\brief Codec control function to turn on / off interintra compound
+   * for a sequence, int parameter
+   *
+   * - 0 = disable
+   * - 1 = enable (default)
+   */
+  AV1E_SET_ENABLE_INTERINTRA_COMP = 90,
+
+  /*!\brief Codec control function to turn on / off smooth inter-intra
+   * mode for a sequence, int parameter
+   *
+   * - 0 = disable
+   * - 1 = enable (default)
+   */
+  AV1E_SET_ENABLE_SMOOTH_INTERINTRA = 91,
+
+  /*!\brief Codec control function to turn on / off difference weighted
+   * compound, int parameter
+   *
+   * - 0 = disable
+   * - 1 = enable (default)
+   */
+  AV1E_SET_ENABLE_DIFF_WTD_COMP = 92,
+
+  /*!\brief Codec control function to turn on / off interinter wedge
+   * compound, int parameter
+   *
+   * - 0 = disable
+   * - 1 = enable (default)
+   */
+  AV1E_SET_ENABLE_INTERINTER_WEDGE = 93,
+
+  /*!\brief Codec control function to turn on / off interintra wedge
+   * compound, int parameter
+   *
+   * - 0 = disable
+   * - 1 = enable (default)
+   */
+  AV1E_SET_ENABLE_INTERINTRA_WEDGE = 94,
+
+  /*!\brief Codec control function to turn on / off global motion usage
+   * for a sequence, int parameter
+   *
+   * - 0 = disable
+   * - 1 = enable (default)
+   *
+   * \note Excluded from CONFIG_REALTIME_ONLY build.
+   */
+  AV1E_SET_ENABLE_GLOBAL_MOTION = 95,
+
+  /*!\brief Codec control function to turn on / off warped motion usage
+   * at sequence level, int parameter
+   *
+   * - 0 = disable
+   * - 1 = enable (default)
+   *
+   * \note Excluded from CONFIG_REALTIME_ONLY build.
+   */
+  AV1E_SET_ENABLE_WARPED_MOTION = 96,
+
+  /*!\brief Codec control function to turn on / off warped motion usage
+   * at frame level, int parameter
+   *
+   * \attention If AV1E_SET_ENABLE_WARPED_MOTION is 0, then this flag is
+   * forced to 0.
+   *
+   * - 0 = disable
+   * - 1 = enable (default)
+   *
+   * \note Excluded from CONFIG_REALTIME_ONLY build.
+   */
+  AV1E_SET_ALLOW_WARPED_MOTION = 97,
+
+  /*!\brief Codec control function to turn on / off filter intra usage at
+   * sequence level, int parameter
+   *
+   * - 0 = disable
+   * - 1 = enable (default)
+   */
+  AV1E_SET_ENABLE_FILTER_INTRA = 98,
+
+  /*!\brief Codec control function to turn on / off smooth intra modes usage,
+   * int parameter
+   *
+   * This will enable or disable usage of smooth, smooth_h and smooth_v intra
+   * modes.
+   *
+   * - 0 = disable
+   * - 1 = enable (default)
+   */
+  AV1E_SET_ENABLE_SMOOTH_INTRA = 99,
+
+  /*!\brief Codec control function to turn on / off Paeth intra mode usage, int
+   * parameter
+   *
+   * - 0 = disable
+   * - 1 = enable (default)
+   */
+  AV1E_SET_ENABLE_PAETH_INTRA = 100,
+
+  /*!\brief Codec control function to turn on / off CFL uv intra mode usage, int
+   * parameter
+   *
+   * This will enable or disable usage of chroma-from-luma intra mode.
+   *
+   * - 0 = disable
+   * - 1 = enable (default)
+   */
+  AV1E_SET_ENABLE_CFL_INTRA = 101,
+
+  /*!\brief Codec control function to turn on / off frame superresolution, int
+   * parameter
+   *
+   * - 0 = disable
+   * - 1 = enable (default)
+   */
+  AV1E_SET_ENABLE_SUPERRES = 102,
+
+  /*!\brief Codec control function to turn on / off overlay frames for
+   * filtered ALTREF frames, int parameter
+   *
+   * This will enable or disable coding of overlay frames for filtered ALTREF
+   * frames. When set to 0, overlay frames are not used but show existing frame
+   * is used to display the filtered ALTREF frame as is. As a result the decoded
+   * frame rate remains the same as the display frame rate. The default is 1.
+   */
+  AV1E_SET_ENABLE_OVERLAY = 103,
+
+  /*!\brief Codec control function to turn on/off palette mode, int parameter */
+  AV1E_SET_ENABLE_PALETTE = 104,
+
+  /*!\brief Codec control function to turn on/off intra block copy mode, int
+     parameter */
+  AV1E_SET_ENABLE_INTRABC = 105,
+
+  /*!\brief Codec control function to turn on/off intra angle delta, int
+     parameter */
+  AV1E_SET_ENABLE_ANGLE_DELTA = 106,
+
+  /*!\brief Codec control function to set the delta q mode, unsigned int
+   * parameter
+   *
+   * AV1 supports a delta q mode feature, that allows modulating q per
+   * superblock.
+   *
+   * - 0 = deltaq signaling off
+   * - 1 = use modulation to maximize objective quality (default)
+   * - 2 = use modulation for local test
+   * - 3 = use modulation for key frame perceptual quality optimization
+   * - 4 = use modulation for user rating based perceptual quality optimization
+   * - 5 = use modulation for HDR video
+   * - 6 = use modulation for all intra using Variance Boost
+   */
+  AV1E_SET_DELTAQ_MODE = 107,
+
+  /*!\brief Codec control function to turn on/off loopfilter modulation
+   * when delta q modulation is enabled, unsigned int parameter.
+   *
+   * \attention AV1 only supports loopfilter modulation when delta q
+   * modulation is enabled as well.
+   */
+  AV1E_SET_DELTALF_MODE = 108,
+
+  /*!\brief Codec control function to set the single tile decoding mode,
+   * unsigned int parameter
+   *
+   * \attention Only applicable if large scale tiling is on.
+   *
+   * - 0 = single tile decoding is off
+   * - 1 = single tile decoding is on (default)
+   */
+  AV1E_SET_SINGLE_TILE_DECODING = 109,
+
+  /*!\brief Codec control function to enable the extreme motion vector unit
+   * test, unsigned int parameter
+   *
+   * - 0 = off
+   * - 1 = MAX_EXTREME_MV
+   * - 2 = MIN_EXTREME_MV
+   *
+   * \note This is only used in motion vector unit test.
+   */
+  AV1E_ENABLE_MOTION_VECTOR_UNIT_TEST = 110,
+
+  /*!\brief Codec control function to signal picture timing info in the
+   * bitstream, aom_timing_info_type_t parameter. Default is
+   * AOM_TIMING_UNSPECIFIED.
+   */
+  AV1E_SET_TIMING_INFO_TYPE = 111,
+
+  /*!\brief Codec control function to add film grain parameters (one of several
+   * preset types) info in the bitstream, int parameter
+   *
+   Valid range: 0..16, 0 is unknown, 1..16 are test vectors
+   */
+  AV1E_SET_FILM_GRAIN_TEST_VECTOR = 112,
+
+  /*!\brief Codec control function to set the path to the film grain parameters,
+   * const char* parameter
+   */
+  AV1E_SET_FILM_GRAIN_TABLE = 113,
+
+  /*!\brief Sets the noise level, int parameter */
+  AV1E_SET_DENOISE_NOISE_LEVEL = 114,
+
+  /*!\brief Sets the denoisers block size, unsigned int parameter */
+  AV1E_SET_DENOISE_BLOCK_SIZE = 115,
+
+  /*!\brief Sets the chroma subsampling x value, unsigned int parameter */
+  AV1E_SET_CHROMA_SUBSAMPLING_X = 116,
+
+  /*!\brief Sets the chroma subsampling y value, unsigned int parameter */
+  AV1E_SET_CHROMA_SUBSAMPLING_Y = 117,
+
+  /*!\brief Control to use a reduced tx type set, int parameter */
+  AV1E_SET_REDUCED_TX_TYPE_SET = 118,
+
+  /*!\brief Control to use dct only for intra modes, int parameter */
+  AV1E_SET_INTRA_DCT_ONLY = 119,
+
+  /*!\brief Control to use dct only for inter modes, int parameter */
+  AV1E_SET_INTER_DCT_ONLY = 120,
+
+  /*!\brief Control to use default tx type only for intra modes, int parameter
+   */
+  AV1E_SET_INTRA_DEFAULT_TX_ONLY = 121,
+
+  /*!\brief Control to use adaptive quantize_b, int parameter */
+  AV1E_SET_QUANT_B_ADAPT = 122,
+
+  /*!\brief Control to select maximum height for the GF group pyramid structure,
+   * unsigned int parameter
+   *
+   * Valid range: 0..5
+   */
+  AV1E_SET_GF_MAX_PYRAMID_HEIGHT = 123,
+
+  /*!\brief Control to select maximum reference frames allowed per frame, int
+   * parameter
+   *
+   * Valid range: 3..7
+   */
+  AV1E_SET_MAX_REFERENCE_FRAMES = 124,
+
+  /*!\brief Control to use reduced set of single and compound references, int
+     parameter */
+  AV1E_SET_REDUCED_REFERENCE_SET = 125,
+
+  /*!\brief Control to set frequency of the cost updates for coefficients,
+   * unsigned int parameter
+   *
+   * - 0 = update at SB level (default)
+   * - 1 = update at SB row level in tile
+   * - 2 = update at tile level
+   * - 3 = turn off
+   */
+  AV1E_SET_COEFF_COST_UPD_FREQ = 126,
+
+  /*!\brief Control to set frequency of the cost updates for mode, unsigned int
+   * parameter
+   *
+   * - 0 = update at SB level (default)
+   * - 1 = update at SB row level in tile
+   * - 2 = update at tile level
+   * - 3 = turn off
+   */
+  AV1E_SET_MODE_COST_UPD_FREQ = 127,
+
+  /*!\brief Control to set frequency of the cost updates for motion vectors,
+   * unsigned int parameter
+   *
+   * - 0 = update at SB level (default)
+   * - 1 = update at SB row level in tile
+   * - 2 = update at tile level
+   * - 3 = turn off
+   */
+  AV1E_SET_MV_COST_UPD_FREQ = 128,
+
+  /*!\brief Control to set bit mask that specifies which tier each of the 32
+   * possible operating points conforms to, unsigned int parameter
+   *
+   * - 0 = main tier (default)
+   * - 1 = high tier
+   */
+  AV1E_SET_TIER_MASK = 129,
+
+  /*!\brief Control to set minimum compression ratio, unsigned int parameter
+   * Take integer values. If non-zero, encoder will try to keep the compression
+   * ratio of each frame to be higher than the given value divided by 100.
+   * E.g. 850 means minimum compression ratio of 8.5.
+   */
+  AV1E_SET_MIN_CR = 130,
+
+  /* NOTE: enums 145-149 unused */
+
+  /*!\brief Codec control function to set the layer id, aom_svc_layer_id_t*
+   * parameter
+   */
+  AV1E_SET_SVC_LAYER_ID = 131,
+
+  /*!\brief Codec control function to set SVC parameters, aom_svc_params_t*
+   * parameter
+   */
+  AV1E_SET_SVC_PARAMS = 132,
+
+  /*!\brief Codec control function to set the reference frame config,
+   * aom_svc_ref_frame_config_t* parameter
+   */
+  AV1E_SET_SVC_REF_FRAME_CONFIG = 133,
+
+  /*!\brief Codec control function to set the path to the VMAF model used when
+   * tuning the encoder for VMAF, const char* parameter
+   */
+  AV1E_SET_VMAF_MODEL_PATH = 134,
+
+  /*!\brief Codec control function to enable EXT_TILE_DEBUG in AV1 encoder,
+   * unsigned int parameter
+   *
+   * - 0 = disable (default)
+   * - 1 = enable
+   *
+   * \note This is only used in lightfield example test.
+   */
+  AV1E_ENABLE_EXT_TILE_DEBUG = 135,
+
+  /*!\brief Codec control function to enable the superblock multipass unit test
+   * in AV1 to ensure that the encoder does not leak state between different
+   * passes. unsigned int parameter.
+   *
+   * - 0 = disable (default)
+   * - 1 = enable
+   *
+   * \note This is only used in sb_multipass unit test.
+   */
+  AV1E_ENABLE_SB_MULTIPASS_UNIT_TEST = 136,
+
+  /*!\brief Control to select minimum height for the GF group pyramid structure,
+   * unsigned int parameter
+   *
+   * Valid values: 0..5
+   */
+  AV1E_SET_GF_MIN_PYRAMID_HEIGHT = 137,
+
+  /*!\brief Control to set average complexity of the corpus in the case of
+   * single pass vbr based on LAP, unsigned int parameter
+   */
+  AV1E_SET_VBR_CORPUS_COMPLEXITY_LAP = 138,
+
+  /*!\brief Control to get baseline gf interval
+   */
+  AV1E_GET_BASELINE_GF_INTERVAL = 139,
+
+  /*\brief Control to set encoding the denoised frame from denoise-noise-level
+   *
+   * - 0 = disabled/encode the original frame
+   * - 1 = enabled/encode the denoised frame (default)
+   */
+  AV1E_SET_ENABLE_DNL_DENOISING = 140,
+
+  /*!\brief Codec control function to turn on / off D45 to D203 intra mode
+   * usage, int parameter
+   *
+   * This will enable or disable usage of D45 to D203 intra modes, which are a
+   * subset of directional modes. This control has no effect if directional
+   * modes are disabled (AV1E_SET_ENABLE_DIRECTIONAL_INTRA set to 0).
+   *
+   * - 0 = disable
+   * - 1 = enable (default)
+   */
+  AV1E_SET_ENABLE_DIAGONAL_INTRA = 141,
+
+  /*!\brief Control to set frequency of the cost updates for intrabc motion
+   * vectors, unsigned int parameter
+   *
+   * - 0 = update at SB level (default)
+   * - 1 = update at SB row level in tile
+   * - 2 = update at tile level
+   * - 3 = turn off
+   */
+  AV1E_SET_DV_COST_UPD_FREQ = 142,
+
+  /*!\brief Codec control to set the path for partition stats read and write.
+   * const char * parameter.
+   */
+  AV1E_SET_PARTITION_INFO_PATH = 143,
+
+  /*!\brief Codec control to use an external partition model
+   * A set of callback functions is passed through this control
+   * to let the encoder encode with given partitions.
+   */
+  AV1E_SET_EXTERNAL_PARTITION = 144,
+
+  /*!\brief Codec control function to turn on / off directional intra mode
+   * usage, int parameter
+   *
+   * - 0 = disable
+   * - 1 = enable (default)
+   */
+  AV1E_SET_ENABLE_DIRECTIONAL_INTRA = 145,
+
+  /*!\brief Control to turn on / off transform size search.
+   * Note: it can not work with non RD pick mode in real-time encoding,
+   * where the max transform size is only 16x16.
+   * It will be ignored if non RD pick mode is set.
+   *
+   * - 0 = disable, transforms always have the largest possible size
+   * - 1 = enable, search for the best transform size for each block (default)
+   */
+  AV1E_SET_ENABLE_TX_SIZE_SEARCH = 146,
+
+  /*!\brief Codec control function to set reference frame compound prediction.
+   * aom_svc_ref_frame_comp_pred_t* parameter
+   */
+  AV1E_SET_SVC_REF_FRAME_COMP_PRED = 147,
+
+  /*!\brief Set --deltaq-mode strength.
+   *
+   * Valid range: [0, 1000]
+   */
+  AV1E_SET_DELTAQ_STRENGTH = 148,
+
+  /*!\brief Codec control to control loop filter
+   *
+   * - 0 = Loop filter is disabled for all frames
+   * - 1 = Loop filter is enabled for all frames
+   * - 2 = Loop filter is disabled for non-reference frames
+   * - 3 = Loop filter is disabled for the frames with low motion
+   */
+  AV1E_SET_LOOPFILTER_CONTROL = 149,
+
+  /*!\brief Codec control function to get the loopfilter chosen by the encoder,
+   * int* parameter
+   */
+  AOME_GET_LOOPFILTER_LEVEL = 150,
+
+  /*!\brief Codec control to automatically turn off several intra coding tools,
+   * unsigned int parameter
+   * - 0 = do not use the feature
+   * - 1 = enable the automatic decision to turn off several intra tools
+   */
+  AV1E_SET_AUTO_INTRA_TOOLS_OFF = 151,
+
+  /*!\brief Codec control function to set flag for rate control used by external
+   * encoders.
+   * - 1 = Enable rate control for external encoders. This will disable content
+   * dependency in rate control and cyclic refresh.
+   * - 0 = Default. Disable rate control for external encoders.
+   */
+  AV1E_SET_RTC_EXTERNAL_RC = 152,
+
+  /*!\brief Codec control function to enable frame parallel multi-threading
+   * of the encoder, unsigned int parameter
+   *
+   * - 0 = disable (default)
+   * - 1 = enable
+   */
+  AV1E_SET_FP_MT = 153,
+
+  /*!\brief Codec control to enable actual frame parallel encode or
+   * simulation of frame parallel encode in FPMT unit test, unsigned int
+   * parameter
+   *
+   * - 0 = simulate frame parallel encode
+   * - 1 = actual frame parallel encode (default)
+   *
+   * \note This is only used in FPMT unit test.
+   */
+  AV1E_SET_FP_MT_UNIT_TEST = 154,
+
+  /*!\brief Codec control function to get the target sequence level index for
+   * each operating point. int* parameter. There can be at most 32 operating
+   * points. The results will be written into a provided integer array of
+   * sufficient size. If a target level is not set, the result will be 31.
+   * Please refer to https://aomediacodec.github.io/av1-spec/#levels for more
+   * details on level definitions and indices.
+   */
+  AV1E_GET_TARGET_SEQ_LEVEL_IDX = 155,
+
+  /*!\brief Codec control function to get the number of operating points. int*
+   * parameter.
+   */
+  AV1E_GET_NUM_OPERATING_POINTS = 156,
+
+  /*!\brief Codec control function to skip the application of post-processing
+   * filters on reconstructed frame, unsigned int parameter
+   *
+   * - 0 = disable (default)
+   * - 1 = enable
+   *
+   * \attention For this value to be used aom_codec_enc_cfg_t::g_usage
+   *            must be set to AOM_USAGE_ALL_INTRA.
+   */
+  AV1E_SET_SKIP_POSTPROC_FILTERING = 157,
+
+  /*!\brief Codec control function to enable the superblock level
+   * qp sweep in AV1 to ensure that end-to-end test runs well,
+   * unsigned int parameter.
+   *
+   * - 0 = disable (default)
+   * - 1 = enable
+   *
+   * \note This is only used in sb_qp_sweep unit test.
+   */
+  AV1E_ENABLE_SB_QP_SWEEP = 158,
+
+  /*!\brief Codec control to set quantizer for the next frame, int parameter.
+   *
+   * - Valid range [0, 63]
+   *
+   * This will turn off cyclic refresh. Only applicable to 1-pass.
+   */
+  AV1E_SET_QUANTIZER_ONE_PASS = 159,
+
+  /*!\brief Codec control to enable the rate distribution guided delta
+   * quantization in all intra mode, unsigned int parameter
+   *
+   * - 0 = disable (default)
+   * - 1 = enable
+   *
+   * \attention This feature requires --deltaq-mode=3, also an input file
+   *            which contains rate distribution for each 16x16 block,
+   *            passed in by --rate-distribution-info=rate_distribution.txt.
+   */
+  AV1E_ENABLE_RATE_GUIDE_DELTAQ = 160,
+
+  /*!\brief Codec control to set the input file for rate distribution used
+   * in all intra mode, const char * parameter
+   * The input should be the name of a text file, which
+   * contains (rows x cols) float values separated by space.
+   * Each float value represent the number of bits for each 16x16 block.
+   * rows = (frame_height + 15) / 16
+   * cols = (frame_width + 15) / 16
+   *
+   * \attention This feature requires --enable-rate-guide-deltaq=1.
+   */
+  AV1E_SET_RATE_DISTRIBUTION_INFO = 161,
+
+  /*!\brief Codec control to get the CDEF strength for Y / luma plane,
+   * int * parameter.
+   * Returns an integer array of CDEF_MAX_STRENGTHS elements.
+   */
+  AV1E_GET_LUMA_CDEF_STRENGTH = 162,
+
+  /*!\brief Codec control to set the target bitrate in kilobits per second,
+   * unsigned int parameter. For 1 pass CBR mode, single layer encoding.
+   * This controls replaces the call aom_codec_enc_config_set(&codec, &cfg)
+   * when only target bitrate is changed, and so is much cheaper as it
+   * bypasses a lot of unneeded code checks.
+   */
+  AV1E_SET_BITRATE_ONE_PASS_CBR = 163,
+
+  /*!\brief Codec control to set the maximum number of consecutive frame drops,
+   * in units of frames, allowed for the frame dropper in 1 pass
+   * CBR mode, int parameter. Value of zero has no effect.
+   * \deprecated Use the new control AV1E_SET_MAX_CONSEC_FRAME_DROP_MS_CBR.
+   */
+  AV1E_SET_MAX_CONSEC_FRAME_DROP_CBR = 164,
+
+  /*!\brief Codec control to set the frame drop mode for SVC,
+   * unsigned int parameter. The valid values are constants of the
+   * AOM_SVC_FRAME_DROP_MODE enum: AOM_LAYER_DROP or AOM_FULL_SUPERFRAME_DROP.
+   */
+  AV1E_SET_SVC_FRAME_DROP_MODE = 165,
+
+  /*!\brief Codec control to set auto tiling, unsigned int parameter.
+   * Value of 1 means encoder will set number of tile_columns and tile_rows,
+   * based on the number of threads and resolution. This will override any
+   * settings set via SET_TILE_COLUMNS/ROWS. If the value is 0 no change is
+   * done, the previous setting (if any) for tile_columns/rows is preserved.
+   */
+  AV1E_SET_AUTO_TILES = 166,
+
+  /*!\brief Codec control to get the high motion content flag, used for
+   * screen content realtime (RTC) encoding, int * parameter.
+   * Returns an integer.
+   * 1 means high motion content flag is set to 1, 0 means set to 0.
+   */
+  AV1E_GET_HIGH_MOTION_CONTENT_SCREEN_RTC = 167,
+
+  /*!\brief Codec control to enable post encode frame drop for RTC encoding,
+   * int parameter.
+   *
+   * Value of 1 means encoder will enable post encode drop. Default is 0 (not
+   * enabled). Post encode drop is only allowed when frame dropping is enabled
+   * (aom_codec_enc_cfg::rc_dropframe_thresh > 0).
+   */
+  AV1E_SET_POSTENCODE_DROP_RTC = 168,
+
+  /*!\brief Codec control to set the maximum number of consecutive frame drops,
+   * in units of time (milliseconds), allowed for the frame dropper in 1 pass
+   * CBR mode, int parameter. Value of zero has no effect.
+   */
+  AV1E_SET_MAX_CONSEC_FRAME_DROP_MS_CBR = 169,
+
+  // Any new encoder control IDs should be added above.
+  // Maximum allowed encoder control ID is 229.
+  // No encoder control ID should be added below.
+};
+
+/*!\brief aom 1-D scaling mode
+ *
+ * This set of constants define 1-D aom scaling modes
+ */
+typedef enum aom_scaling_mode_1d {
+  AOME_NORMAL = 0,
+  AOME_FOURFIVE = 1,
+  AOME_THREEFIVE = 2,
+  AOME_THREEFOUR = 3,
+  AOME_ONEFOUR = 4,
+  AOME_ONEEIGHT = 5,
+  AOME_ONETWO = 6,
+  AOME_TWOTHREE = 7,
+  AOME_ONETHREE = 8
+} AOM_SCALING_MODE;
+
+/*!\brief Max number of segments
+ *
+ * This is the limit of number of segments allowed within a frame.
+ *
+ * Currently same as "MAX_SEGMENTS" in AV1, the maximum that AV1 supports.
+ *
+ */
+#define AOM_MAX_SEGMENTS 8
+
+/*!\brief  aom region of interest map
+ *
+ * These defines the data structures for the region of interest map
+ *
+ * TODO(yaowu): create a unit test for ROI map related APIs
+ *
+ */
+typedef struct aom_roi_map {
+  /*! An id between 0 and 7 for each 8x8 region within a frame. */
+  unsigned char *roi_map;
+  unsigned int rows;              /**< Number of rows. */
+  unsigned int cols;              /**< Number of columns. */
+  int delta_q[AOM_MAX_SEGMENTS];  /**< Quantizer deltas. */
+  int delta_lf[AOM_MAX_SEGMENTS]; /**< Loop filter deltas. */
+  /*! Static breakout threshold for each segment. */
+  unsigned int static_threshold[AOM_MAX_SEGMENTS];
+} aom_roi_map_t;
+
+/*!\brief  aom active region map
+ *
+ * These defines the data structures for active region map
+ *
+ */
+
+typedef struct aom_active_map {
+  /*!\brief specify an on (1) or off (0) each 16x16 region within a frame */
+  unsigned char *active_map;
+  unsigned int rows; /**< number of rows */
+  unsigned int cols; /**< number of cols */
+} aom_active_map_t;
+
+/*!\brief  aom image scaling mode
+ *
+ * This defines the data structure for image scaling mode
+ *
+ */
+typedef struct aom_scaling_mode {
+  AOM_SCALING_MODE h_scaling_mode; /**< horizontal scaling mode */
+  AOM_SCALING_MODE v_scaling_mode; /**< vertical scaling mode   */
+} aom_scaling_mode_t;
+
+/*!brief AV1 encoder content type */
+typedef enum {
+  AOM_CONTENT_DEFAULT,
+  AOM_CONTENT_SCREEN,
+  AOM_CONTENT_FILM,
+  AOM_CONTENT_INVALID
+} aom_tune_content;
+
+/*!brief AV1 encoder timing info type signaling */
+typedef enum {
+  AOM_TIMING_UNSPECIFIED,
+  AOM_TIMING_EQUAL,
+  AOM_TIMING_DEC_MODEL
+} aom_timing_info_type_t;
+
+/*!\brief Model tuning parameters
+ *
+ * Changes the encoder to tune for certain types of input material.
+ *
+ * \note
+ * AOM_TUNE_IQ is restricted to all intra mode (AOM_USAGE_ALL_INTRA). Setting
+ * the tuning option to AOM_TUNE_IQ causes the following options to be set
+ * (expressed as command-line options):
+ *   * --enable-qm=1
+ *   * --qm-min=2
+ *   * --qm-max=10
+ *   * --sharpness=7
+ *   * --dist-metric=qm-psnr
+ *   * --enable-cdef=3
+ *   * --enable-chroma-deltaq=1
+ *   * --deltaq-mode=6
+ */
+typedef enum {
+  AOM_TUNE_PSNR = 0,
+  AOM_TUNE_SSIM = 1,
+  /* NOTE: enums 2 and 3 unused */
+  AOM_TUNE_VMAF_WITH_PREPROCESSING = 4,
+  AOM_TUNE_VMAF_WITHOUT_PREPROCESSING = 5,
+  AOM_TUNE_VMAF_MAX_GAIN = 6,
+  AOM_TUNE_VMAF_NEG_MAX_GAIN = 7,
+  AOM_TUNE_BUTTERAUGLI = 8,
+  AOM_TUNE_VMAF_SALIENCY_MAP = 9,
+/*!\brief Allows detection of the presence of AOM_TUNE_IQ at compile time. */
+#define AOM_HAVE_TUNE_IQ 1
+  /* Image quality (or intra quality). Increases image quality and consistency,
+   * guided by the SSIMULACRA 2 metric and subjective quality checks. Shares
+   * the rdmult code with AOM_TUNE_SSIM.
+   */
+  AOM_TUNE_IQ = 10,
+} aom_tune_metric;
+
+/*!\brief Distortion metric to use for RD optimization.
+ *
+ * Changes the encoder to use a different distortion metric for RD search. Note
+ * that this value operates on a "lower level" compared to aom_tune_metric - it
+ * affects the distortion metric inside a block, while aom_tune_metric only
+ * affects RD across blocks.
+ *
+ */
+typedef enum {
+  // Use PSNR for in-block rate-distortion optimization.
+  AOM_DIST_METRIC_PSNR,
+  // Use quantization matrix-weighted PSNR for in-block rate-distortion
+  // optimization. If --enable-qm=1 is not specified, this falls back to
+  // behaving in the same way as AOM_DIST_METRIC_PSNR.
+  AOM_DIST_METRIC_QM_PSNR,
+} aom_dist_metric;
+
+#define AOM_MAX_LAYERS 32   /**< Max number of layers */
+#define AOM_MAX_SS_LAYERS 4 /**< Max number of spatial layers */
+#define AOM_MAX_TS_LAYERS 8 /**< Max number of temporal layers */
+
+/*!brief Struct for spatial and temporal layer ID */
+typedef struct aom_svc_layer_id {
+  int spatial_layer_id;  /**< Spatial layer ID */
+  int temporal_layer_id; /**< Temporal layer ID */
+} aom_svc_layer_id_t;
+
+/*!brief Parameter type for SVC
+ *
+ * In the arrays of size AOM_MAX_LAYERS, the index for spatial layer `sl` and
+ * temporal layer `tl` is sl * number_temporal_layers + tl.
+ *
+ */
+typedef struct aom_svc_params {
+  int number_spatial_layers;                 /**< Number of spatial layers */
+  int number_temporal_layers;                /**< Number of temporal layers */
+  int max_quantizers[AOM_MAX_LAYERS];        /**< Max Q for each layer */
+  int min_quantizers[AOM_MAX_LAYERS];        /**< Min Q for each layer */
+  int scaling_factor_num[AOM_MAX_SS_LAYERS]; /**< Scaling factor-numerator */
+  int scaling_factor_den[AOM_MAX_SS_LAYERS]; /**< Scaling factor-denominator */
+  /*! Target bitrate for each layer, in kilobits per second */
+  int layer_target_bitrate[AOM_MAX_LAYERS];
+  /*! Frame rate factor for each temporal layer */
+  int framerate_factor[AOM_MAX_TS_LAYERS];
+} aom_svc_params_t;
+
+/*!brief Parameters for setting ref frame config */
+typedef struct aom_svc_ref_frame_config {
+  // Three arrays need to be set: reference[], ref_id[], refresh[].
+  // reference[i]: is a boolean flag to indicate which of the 7 possible
+  // references are used for prediction. Values are 0 (not used as reference)
+  // or 1 (use as reference). The index 0 - 6 refers to the references:
+  // last(0), last2(1), last3(2), golden(3), bwdref(4), altref2(5), altref(6).
+  // ref_idx[i]: maps a reference to one of the 8 buffers slots, values are
+  // 0 - 7. The ref_idx for a unused reference (reference[i] = 1, and not used
+  // for refresh, see below) can be set to the ref_idx of the first reference
+  // used (usually LAST).
+  // refresh[i] is a boolean flag to indicate if a buffer is updated/refreshed
+  // with the current encoded frame. Values are 0 (no refresh) or 1 (refresh).
+  // The refresh is done internally by looking at the ref_idx[j], for j = 0 - 6,
+  // so to refresh a buffer slot (i) a reference must be mapped to that slot
+  // (i = ref_idx[j]).
+  // Examples for usage (for RTC encoding) are in: examples/svc_encoder_rtc.c.
+  int reference[7]; /**< Reference flag for each of the 7 references. */
+  /*! Buffer slot index (0..7) for each of 7 references indexed above. */
+  int ref_idx[7];
+  int refresh[8]; /**< Refresh flag for each of the 8 buffer slots. */
+} aom_svc_ref_frame_config_t;
+
+/*!brief Parameters for setting ref frame compound prediction */
+typedef struct aom_svc_ref_frame_comp_pred {
+  // Use compound prediction for the ref_frame pairs GOLDEN_LAST (0),
+  // LAST2_LAST (1), and ALTREF_LAST (2).
+  int use_comp_pred[3]; /**<Compound reference flag. */
+} aom_svc_ref_frame_comp_pred_t;
+
+/*!brief Frame drop modes for spatial/quality layer SVC */
+typedef enum {
+  AOM_LAYER_DROP,           /**< Any spatial layer can drop. */
+  AOM_FULL_SUPERFRAME_DROP, /**< Only full superframe can drop. */
+} AOM_SVC_FRAME_DROP_MODE;
+
+/*!\cond */
+/*!\brief Encoder control function parameter type
+ *
+ * Defines the data types that AOME/AV1E control functions take.
+ *
+ * \note Additional common controls are defined in aom.h.
+ *
+ * \note For each control ID "X", a macro-define of
+ * AOM_CTRL_X is provided. It is used at compile time to determine
+ * if the control ID is supported by the libaom library available,
+ * when the libaom version cannot be controlled.
+ */
+AOM_CTRL_USE_TYPE(AOME_USE_REFERENCE, int)
+#define AOM_CTRL_AOME_USE_REFERENCE
+
+AOM_CTRL_USE_TYPE(AOME_SET_ROI_MAP, aom_roi_map_t *)
+#define AOM_CTRL_AOME_SET_ROI_MAP
+
+AOM_CTRL_USE_TYPE(AOME_SET_ACTIVEMAP, aom_active_map_t *)
+#define AOM_CTRL_AOME_SET_ACTIVEMAP
+
+AOM_CTRL_USE_TYPE(AOME_SET_SCALEMODE, aom_scaling_mode_t *)
+#define AOM_CTRL_AOME_SET_SCALEMODE
+
+AOM_CTRL_USE_TYPE(AOME_SET_SPATIAL_LAYER_ID, int)
+#define AOM_CTRL_AOME_SET_SPATIAL_LAYER_ID
+
+AOM_CTRL_USE_TYPE(AOME_SET_CPUUSED, int)
+#define AOM_CTRL_AOME_SET_CPUUSED
+
+AOM_CTRL_USE_TYPE(AOME_SET_ENABLEAUTOALTREF, unsigned int)
+#define AOM_CTRL_AOME_SET_ENABLEAUTOALTREF
+
+AOM_CTRL_USE_TYPE(AOME_SET_SHARPNESS, unsigned int)
+#define AOM_CTRL_AOME_SET_SHARPNESS
+
+AOM_CTRL_USE_TYPE(AOME_SET_STATIC_THRESHOLD, unsigned int)
+#define AOM_CTRL_AOME_SET_STATIC_THRESHOLD
+
+AOM_CTRL_USE_TYPE(AOME_GET_LAST_QUANTIZER, int *)
+#define AOM_CTRL_AOME_GET_LAST_QUANTIZER
+
+AOM_CTRL_USE_TYPE(AOME_GET_LAST_QUANTIZER_64, int *)
+#define AOM_CTRL_AOME_GET_LAST_QUANTIZER_64
+
+AOM_CTRL_USE_TYPE(AOME_SET_ARNR_MAXFRAMES, unsigned int)
+#define AOM_CTRL_AOME_SET_ARNR_MAXFRAMES
+
+AOM_CTRL_USE_TYPE(AOME_SET_ARNR_STRENGTH, unsigned int)
+#define AOM_CTRL_AOME_SET_ARNR_STRENGTH
+
+AOM_CTRL_USE_TYPE(AOME_SET_TUNING, int) /* aom_tune_metric */
+#define AOM_CTRL_AOME_SET_TUNING
+
+AOM_CTRL_USE_TYPE(AOME_SET_CQ_LEVEL, unsigned int)
+#define AOM_CTRL_AOME_SET_CQ_LEVEL
+
+AOM_CTRL_USE_TYPE(AOME_SET_MAX_INTRA_BITRATE_PCT, unsigned int)
+#define AOM_CTRL_AOME_SET_MAX_INTRA_BITRATE_PCT
+
+AOM_CTRL_USE_TYPE(AOME_SET_NUMBER_SPATIAL_LAYERS, int)
+#define AOM_CTRL_AOME_SET_NUMBER_SPATIAL_LAYERS
+// TODO(aomedia:3231): Deprecated. Remove it.
+#define AOME_CTRL_AOME_SET_NUMBER_SPATIAL_LAYERS
+
+AOM_CTRL_USE_TYPE(AOME_SET_MAX_INTER_BITRATE_PCT, unsigned int)
+#define AOM_CTRL_AV1E_SET_MAX_INTER_BITRATE_PCT
+// TODO(aomedia:3231): Deprecated. Remove it.
+#define AOM_CTRL_AOME_SET_MAX_INTER_BITRATE_PCT
+
+AOM_CTRL_USE_TYPE(AV1E_SET_GF_CBR_BOOST_PCT, unsigned int)
+#define AOM_CTRL_AV1E_SET_GF_CBR_BOOST_PCT
+
+AOM_CTRL_USE_TYPE(AV1E_SET_LOSSLESS, unsigned int)
+#define AOM_CTRL_AV1E_SET_LOSSLESS
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ROW_MT, unsigned int)
+#define AOM_CTRL_AV1E_SET_ROW_MT
+
+AOM_CTRL_USE_TYPE(AV1E_SET_TILE_COLUMNS, unsigned int)
+#define AOM_CTRL_AV1E_SET_TILE_COLUMNS
+
+AOM_CTRL_USE_TYPE(AV1E_SET_TILE_ROWS, unsigned int)
+#define AOM_CTRL_AV1E_SET_TILE_ROWS
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_TPL_MODEL, unsigned int)
+#define AOM_CTRL_AV1E_SET_ENABLE_TPL_MODEL
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_KEYFRAME_FILTERING, unsigned int)
+#define AOM_CTRL_AV1E_SET_ENABLE_KEYFRAME_FILTERING
+
+AOM_CTRL_USE_TYPE(AV1E_SET_FRAME_PARALLEL_DECODING, unsigned int)
+#define AOM_CTRL_AV1E_SET_FRAME_PARALLEL_DECODING
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ERROR_RESILIENT_MODE, int)
+#define AOM_CTRL_AV1E_SET_ERROR_RESILIENT_MODE
+
+AOM_CTRL_USE_TYPE(AV1E_SET_S_FRAME_MODE, int)
+#define AOM_CTRL_AV1E_SET_S_FRAME_MODE
+
+AOM_CTRL_USE_TYPE(AV1E_SET_AQ_MODE, unsigned int)
+#define AOM_CTRL_AV1E_SET_AQ_MODE
+
+AOM_CTRL_USE_TYPE(AV1E_SET_FRAME_PERIODIC_BOOST, unsigned int)
+#define AOM_CTRL_AV1E_SET_FRAME_PERIODIC_BOOST
+
+AOM_CTRL_USE_TYPE(AV1E_SET_NOISE_SENSITIVITY, unsigned int)
+#define AOM_CTRL_AV1E_SET_NOISE_SENSITIVITY
+
+AOM_CTRL_USE_TYPE(AV1E_SET_TUNE_CONTENT, int) /* aom_tune_content */
+#define AOM_CTRL_AV1E_SET_TUNE_CONTENT
+
+AOM_CTRL_USE_TYPE(AV1E_SET_CDF_UPDATE_MODE, unsigned int)
+#define AOM_CTRL_AV1E_SET_CDF_UPDATE_MODE
+
+AOM_CTRL_USE_TYPE(AV1E_SET_COLOR_PRIMARIES, int)
+#define AOM_CTRL_AV1E_SET_COLOR_PRIMARIES
+
+AOM_CTRL_USE_TYPE(AV1E_SET_TRANSFER_CHARACTERISTICS, int)
+#define AOM_CTRL_AV1E_SET_TRANSFER_CHARACTERISTICS
+
+AOM_CTRL_USE_TYPE(AV1E_SET_MATRIX_COEFFICIENTS, int)
+#define AOM_CTRL_AV1E_SET_MATRIX_COEFFICIENTS
+
+AOM_CTRL_USE_TYPE(AV1E_SET_CHROMA_SAMPLE_POSITION, int)
+#define AOM_CTRL_AV1E_SET_CHROMA_SAMPLE_POSITION
+
+AOM_CTRL_USE_TYPE(AV1E_SET_MIN_GF_INTERVAL, unsigned int)
+#define AOM_CTRL_AV1E_SET_MIN_GF_INTERVAL
+
+AOM_CTRL_USE_TYPE(AV1E_SET_MAX_GF_INTERVAL, unsigned int)
+#define AOM_CTRL_AV1E_SET_MAX_GF_INTERVAL
+
+AOM_CTRL_USE_TYPE(AV1E_GET_ACTIVEMAP, aom_active_map_t *)
+#define AOM_CTRL_AV1E_GET_ACTIVEMAP
+
+AOM_CTRL_USE_TYPE(AV1E_SET_COLOR_RANGE, int)
+#define AOM_CTRL_AV1E_SET_COLOR_RANGE
+
+AOM_CTRL_USE_TYPE(AV1E_SET_RENDER_SIZE, int *)
+#define AOM_CTRL_AV1E_SET_RENDER_SIZE
+
+AOM_CTRL_USE_TYPE(AV1E_SET_TARGET_SEQ_LEVEL_IDX, int)
+#define AOM_CTRL_AV1E_SET_TARGET_SEQ_LEVEL_IDX
+
+AOM_CTRL_USE_TYPE(AV1E_GET_SEQ_LEVEL_IDX, int *)
+#define AOM_CTRL_AV1E_GET_SEQ_LEVEL_IDX
+
+AOM_CTRL_USE_TYPE(AV1E_SET_SUPERBLOCK_SIZE, unsigned int)
+#define AOM_CTRL_AV1E_SET_SUPERBLOCK_SIZE
+
+AOM_CTRL_USE_TYPE(AOME_SET_ENABLEAUTOBWDREF, unsigned int)
+#define AOM_CTRL_AOME_SET_ENABLEAUTOBWDREF
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_CDEF, unsigned int)
+#define AOM_CTRL_AV1E_SET_ENABLE_CDEF
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_RESTORATION, unsigned int)
+#define AOM_CTRL_AV1E_SET_ENABLE_RESTORATION
+
+AOM_CTRL_USE_TYPE(AV1E_SET_FORCE_VIDEO_MODE, unsigned int)
+#define AOM_CTRL_AV1E_SET_FORCE_VIDEO_MODE
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_OBMC, unsigned int)
+#define AOM_CTRL_AV1E_SET_ENABLE_OBMC
+
+AOM_CTRL_USE_TYPE(AV1E_SET_DISABLE_TRELLIS_QUANT, unsigned int)
+#define AOM_CTRL_AV1E_SET_DISABLE_TRELLIS_QUANT
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_QM, unsigned int)
+#define AOM_CTRL_AV1E_SET_ENABLE_QM
+
+// TODO(aomedia:3231): Remove these two lines.
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_DIST_8X8, unsigned int)
+#define AOM_CTRL_AV1E_SET_ENABLE_DIST_8X8
+
+AOM_CTRL_USE_TYPE(AV1E_SET_QM_MIN, unsigned int)
+#define AOM_CTRL_AV1E_SET_QM_MIN
+
+AOM_CTRL_USE_TYPE(AV1E_SET_QM_MAX, unsigned int)
+#define AOM_CTRL_AV1E_SET_QM_MAX
+
+AOM_CTRL_USE_TYPE(AV1E_SET_QM_Y, unsigned int)
+#define AOM_CTRL_AV1E_SET_QM_Y
+
+AOM_CTRL_USE_TYPE(AV1E_SET_QM_U, unsigned int)
+#define AOM_CTRL_AV1E_SET_QM_U
+
+AOM_CTRL_USE_TYPE(AV1E_SET_QM_V, unsigned int)
+#define AOM_CTRL_AV1E_SET_QM_V
+
+AOM_CTRL_USE_TYPE(AV1E_SET_NUM_TG, unsigned int)
+#define AOM_CTRL_AV1E_SET_NUM_TG
+
+AOM_CTRL_USE_TYPE(AV1E_SET_MTU, unsigned int)
+#define AOM_CTRL_AV1E_SET_MTU
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_RECT_PARTITIONS, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_RECT_PARTITIONS
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_AB_PARTITIONS, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_AB_PARTITIONS
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_1TO4_PARTITIONS, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_1TO4_PARTITIONS
+
+AOM_CTRL_USE_TYPE(AV1E_SET_MIN_PARTITION_SIZE, int)
+#define AOM_CTRL_AV1E_SET_MIN_PARTITION_SIZE
+
+AOM_CTRL_USE_TYPE(AV1E_SET_MAX_PARTITION_SIZE, int)
+#define AOM_CTRL_AV1E_SET_MAX_PARTITION_SIZE
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_INTRA_EDGE_FILTER, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_INTRA_EDGE_FILTER
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_ORDER_HINT, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_ORDER_HINT
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_TX64, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_TX64
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_FLIP_IDTX, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_FLIP_IDTX
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_RECT_TX, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_RECT_TX
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_DIST_WTD_COMP, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_DIST_WTD_COMP
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_REF_FRAME_MVS, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_REF_FRAME_MVS
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ALLOW_REF_FRAME_MVS, int)
+#define AOM_CTRL_AV1E_SET_ALLOW_REF_FRAME_MVS
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_DUAL_FILTER, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_DUAL_FILTER
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_CHROMA_DELTAQ, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_CHROMA_DELTAQ
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_MASKED_COMP, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_MASKED_COMP
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_ONESIDED_COMP, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_ONESIDED_COMP
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_INTERINTRA_COMP, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_INTERINTRA_COMP
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_SMOOTH_INTERINTRA, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_SMOOTH_INTERINTRA
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_DIFF_WTD_COMP, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_DIFF_WTD_COMP
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_INTERINTER_WEDGE, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_INTERINTER_WEDGE
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_INTERINTRA_WEDGE, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_INTERINTRA_WEDGE
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_GLOBAL_MOTION, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_GLOBAL_MOTION
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_WARPED_MOTION, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_WARPED_MOTION
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ALLOW_WARPED_MOTION, int)
+#define AOM_CTRL_AV1E_SET_ALLOW_WARPED_MOTION
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_FILTER_INTRA, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_FILTER_INTRA
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_SMOOTH_INTRA, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_SMOOTH_INTRA
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_PAETH_INTRA, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_PAETH_INTRA
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_CFL_INTRA, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_CFL_INTRA
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_SUPERRES, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_SUPERRES
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_OVERLAY, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_OVERLAY
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_PALETTE, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_PALETTE
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_INTRABC, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_INTRABC
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_ANGLE_DELTA, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_ANGLE_DELTA
+
+AOM_CTRL_USE_TYPE(AV1E_SET_DELTAQ_MODE, unsigned int)
+#define AOM_CTRL_AV1E_SET_DELTAQ_MODE
+
+AOM_CTRL_USE_TYPE(AV1E_SET_DELTALF_MODE, unsigned int)
+#define AOM_CTRL_AV1E_SET_DELTALF_MODE
+
+AOM_CTRL_USE_TYPE(AV1E_SET_SINGLE_TILE_DECODING, unsigned int)
+#define AOM_CTRL_AV1E_SET_SINGLE_TILE_DECODING
+
+AOM_CTRL_USE_TYPE(AV1E_ENABLE_MOTION_VECTOR_UNIT_TEST, unsigned int)
+#define AOM_CTRL_AV1E_ENABLE_MOTION_VECTOR_UNIT_TEST
+
+AOM_CTRL_USE_TYPE(AV1E_SET_TIMING_INFO_TYPE, int) /* aom_timing_info_type_t */
+#define AOM_CTRL_AV1E_SET_TIMING_INFO_TYPE
+
+AOM_CTRL_USE_TYPE(AV1E_SET_FILM_GRAIN_TEST_VECTOR, int)
+#define AOM_CTRL_AV1E_SET_FILM_GRAIN_TEST_VECTOR
+
+AOM_CTRL_USE_TYPE(AV1E_SET_FILM_GRAIN_TABLE, const char *)
+#define AOM_CTRL_AV1E_SET_FILM_GRAIN_TABLE
+
+AOM_CTRL_USE_TYPE(AV1E_SET_DENOISE_NOISE_LEVEL, int)
+#define AOM_CTRL_AV1E_SET_DENOISE_NOISE_LEVEL
+
+AOM_CTRL_USE_TYPE(AV1E_SET_DENOISE_BLOCK_SIZE, unsigned int)
+#define AOM_CTRL_AV1E_SET_DENOISE_BLOCK_SIZE
+
+AOM_CTRL_USE_TYPE(AV1E_SET_CHROMA_SUBSAMPLING_X, unsigned int)
+#define AOM_CTRL_AV1E_SET_CHROMA_SUBSAMPLING_X
+
+AOM_CTRL_USE_TYPE(AV1E_SET_CHROMA_SUBSAMPLING_Y, unsigned int)
+#define AOM_CTRL_AV1E_SET_CHROMA_SUBSAMPLING_Y
+
+AOM_CTRL_USE_TYPE(AV1E_SET_REDUCED_TX_TYPE_SET, int)
+#define AOM_CTRL_AV1E_SET_REDUCED_TX_TYPE_SET
+
+AOM_CTRL_USE_TYPE(AV1E_SET_INTRA_DCT_ONLY, int)
+#define AOM_CTRL_AV1E_SET_INTRA_DCT_ONLY
+
+AOM_CTRL_USE_TYPE(AV1E_SET_INTER_DCT_ONLY, int)
+#define AOM_CTRL_AV1E_SET_INTER_DCT_ONLY
+
+AOM_CTRL_USE_TYPE(AV1E_SET_INTRA_DEFAULT_TX_ONLY, int)
+#define AOM_CTRL_AV1E_SET_INTRA_DEFAULT_TX_ONLY
+
+AOM_CTRL_USE_TYPE(AV1E_SET_QUANT_B_ADAPT, int)
+#define AOM_CTRL_AV1E_SET_QUANT_B_ADAPT
+
+AOM_CTRL_USE_TYPE(AV1E_SET_GF_MAX_PYRAMID_HEIGHT, unsigned int)
+#define AOM_CTRL_AV1E_SET_GF_MAX_PYRAMID_HEIGHT
+
+AOM_CTRL_USE_TYPE(AV1E_SET_MAX_REFERENCE_FRAMES, int)
+#define AOM_CTRL_AV1E_SET_MAX_REFERENCE_FRAMES
+
+AOM_CTRL_USE_TYPE(AV1E_SET_REDUCED_REFERENCE_SET, int)
+#define AOM_CTRL_AV1E_SET_REDUCED_REFERENCE_SET
+
+AOM_CTRL_USE_TYPE(AV1E_SET_COEFF_COST_UPD_FREQ, unsigned int)
+#define AOM_CTRL_AV1E_SET_COEFF_COST_UPD_FREQ
+
+AOM_CTRL_USE_TYPE(AV1E_SET_MODE_COST_UPD_FREQ, unsigned int)
+#define AOM_CTRL_AV1E_SET_MODE_COST_UPD_FREQ
+
+AOM_CTRL_USE_TYPE(AV1E_SET_MV_COST_UPD_FREQ, unsigned int)
+#define AOM_CTRL_AV1E_SET_MV_COST_UPD_FREQ
+
+AOM_CTRL_USE_TYPE(AV1E_SET_TIER_MASK, unsigned int)
+#define AOM_CTRL_AV1E_SET_TIER_MASK
+
+AOM_CTRL_USE_TYPE(AV1E_SET_MIN_CR, unsigned int)
+#define AOM_CTRL_AV1E_SET_MIN_CR
+
+AOM_CTRL_USE_TYPE(AV1E_SET_SVC_LAYER_ID, aom_svc_layer_id_t *)
+#define AOM_CTRL_AV1E_SET_SVC_LAYER_ID
+// TODO(aomedia:3231): Deprecated. Remove it.
+#define AOME_CTRL_AV1E_SET_SVC_LAYER_ID
+
+AOM_CTRL_USE_TYPE(AV1E_SET_SVC_PARAMS, aom_svc_params_t *)
+#define AOM_CTRL_AV1E_SET_SVC_PARAMS
+// TODO(aomedia:3231): Deprecated. Remove it.
+#define AOME_CTRL_AV1E_SET_SVC_PARAMS
+
+AOM_CTRL_USE_TYPE(AV1E_SET_SVC_REF_FRAME_CONFIG, aom_svc_ref_frame_config_t *)
+#define AOM_CTRL_AV1E_SET_SVC_REF_FRAME_CONFIG
+// TODO(aomedia:3231): Deprecated. Remove it.
+#define AOME_CTRL_AV1E_SET_SVC_REF_FRAME_CONFIG
+
+AOM_CTRL_USE_TYPE(AV1E_SET_VMAF_MODEL_PATH, const char *)
+#define AOM_CTRL_AV1E_SET_VMAF_MODEL_PATH
+
+AOM_CTRL_USE_TYPE(AV1E_ENABLE_EXT_TILE_DEBUG, unsigned int)
+#define AOM_CTRL_AV1E_ENABLE_EXT_TILE_DEBUG
+
+AOM_CTRL_USE_TYPE(AV1E_ENABLE_SB_MULTIPASS_UNIT_TEST, unsigned int)
+#define AOM_CTRL_AV1E_ENABLE_SB_MULTIPASS_UNIT_TEST
+
+AOM_CTRL_USE_TYPE(AV1E_SET_GF_MIN_PYRAMID_HEIGHT, unsigned int)
+#define AOM_CTRL_AV1E_SET_GF_MIN_PYRAMID_HEIGHT
+
+AOM_CTRL_USE_TYPE(AV1E_SET_VBR_CORPUS_COMPLEXITY_LAP, unsigned int)
+#define AOM_CTRL_AV1E_SET_VBR_CORPUS_COMPLEXITY_LAP
+
+AOM_CTRL_USE_TYPE(AV1E_GET_BASELINE_GF_INTERVAL, int *)
+#define AOM_CTRL_AV1E_GET_BASELINE_GF_INTERVAL
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_DNL_DENOISING, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_DNL_DENOISING
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_DIAGONAL_INTRA, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_DIAGONAL_INTRA
+
+AOM_CTRL_USE_TYPE(AV1E_SET_DV_COST_UPD_FREQ, unsigned int)
+#define AOM_CTRL_AV1E_SET_DV_COST_UPD_FREQ
+
+AOM_CTRL_USE_TYPE(AV1E_SET_PARTITION_INFO_PATH, const char *)
+#define AOM_CTRL_AV1E_SET_PARTITION_INFO_PATH
+
+AOM_CTRL_USE_TYPE(AV1E_SET_EXTERNAL_PARTITION, aom_ext_part_funcs_t *)
+#define AOM_CTRL_AV1E_SET_EXTERNAL_PARTITION
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_DIRECTIONAL_INTRA, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_DIRECTIONAL_INTRA
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_TX_SIZE_SEARCH, int)
+#define AOM_CTRL_AV1E_SET_ENABLE_TX_SIZE_SEARCH
+
+AOM_CTRL_USE_TYPE(AV1E_SET_SVC_REF_FRAME_COMP_PRED,
+                  aom_svc_ref_frame_comp_pred_t *)
+#define AOM_CTRL_AV1E_SET_SVC_REF_FRAME_COMP_PRED
+// TODO(aomedia:3231): Deprecated. Remove it.
+#define AOME_CTRL_AV1E_SET_SVC_REF_FRAME_COMP_PRED
+
+AOM_CTRL_USE_TYPE(AV1E_SET_DELTAQ_STRENGTH, unsigned int)
+#define AOM_CTRL_AV1E_SET_DELTAQ_STRENGTH
+
+AOM_CTRL_USE_TYPE(AV1E_SET_LOOPFILTER_CONTROL, int)
+#define AOM_CTRL_AV1E_SET_LOOPFILTER_CONTROL
+
+AOM_CTRL_USE_TYPE(AOME_GET_LOOPFILTER_LEVEL, int *)
+#define AOM_CTRL_AOME_GET_LOOPFILTER_LEVEL
+
+AOM_CTRL_USE_TYPE(AV1E_SET_AUTO_INTRA_TOOLS_OFF, unsigned int)
+#define AOM_CTRL_AV1E_SET_AUTO_INTRA_TOOLS_OFF
+
+AOM_CTRL_USE_TYPE(AV1E_SET_RTC_EXTERNAL_RC, int)
+#define AOM_CTRL_AV1E_SET_RTC_EXTERNAL_RC
+
+AOM_CTRL_USE_TYPE(AV1E_SET_FP_MT, unsigned int)
+#define AOM_CTRL_AV1E_SET_FP_MT
+
+AOM_CTRL_USE_TYPE(AV1E_SET_FP_MT_UNIT_TEST, unsigned int)
+#define AOM_CTRL_AV1E_SET_FP_MT_UNIT_TEST
+
+AOM_CTRL_USE_TYPE(AV1E_GET_TARGET_SEQ_LEVEL_IDX, int *)
+#define AOM_CTRL_AV1E_GET_TARGET_SEQ_LEVEL_IDX
+
+AOM_CTRL_USE_TYPE(AV1E_GET_NUM_OPERATING_POINTS, int *)
+#define AOM_CTRL_AV1E_GET_NUM_OPERATING_POINTS
+
+AOM_CTRL_USE_TYPE(AV1E_SET_SKIP_POSTPROC_FILTERING, unsigned int)
+#define AOM_CTRL_AV1E_SET_SKIP_POSTPROC_FILTERING
+
+AOM_CTRL_USE_TYPE(AV1E_ENABLE_SB_QP_SWEEP, unsigned int)
+#define AOM_CTRL_AV1E_ENABLE_SB_QP_SWEEP
+
+AOM_CTRL_USE_TYPE(AV1E_SET_QUANTIZER_ONE_PASS, int)
+#define AOM_CTRL_AV1E_SET_QUANTIZER_ONE_PASS
+
+AOM_CTRL_USE_TYPE(AV1E_ENABLE_RATE_GUIDE_DELTAQ, unsigned int)
+#define AOM_CTRL_AV1E_ENABLE_RATE_GUIDE_DELTAQ
+
+AOM_CTRL_USE_TYPE(AV1E_SET_RATE_DISTRIBUTION_INFO, const char *)
+#define AOM_CTRL_AV1E_SET_RATE_DISTRIBUTION_INFO
+
+AOM_CTRL_USE_TYPE(AV1E_GET_LUMA_CDEF_STRENGTH, int *)
+#define AOM_CTRL_AV1E_GET_LUMA_CDEF_STRENGTH
+
+AOM_CTRL_USE_TYPE(AV1E_SET_BITRATE_ONE_PASS_CBR, unsigned int)
+#define AOM_CTRL_AV1E_SET_BITRATE_ONE_PASS_CBR
+
+AOM_CTRL_USE_TYPE(AV1E_SET_SVC_FRAME_DROP_MODE, unsigned int)
+#define AOM_CTRL_AV1E_SET_SVC_FRAME_DROP_MODE
+
+AOM_CTRL_USE_TYPE(AV1E_SET_MAX_CONSEC_FRAME_DROP_CBR, int)
+#define AOM_CTRL_AV1E_SET_MAX_CONSEC_FRAME_DROP_CBR
+
+AOM_CTRL_USE_TYPE(AV1E_SET_AUTO_TILES, unsigned int)
+#define AOM_CTRL_AV1E_SET_AUTO_TILES
+
+AOM_CTRL_USE_TYPE(AV1E_GET_HIGH_MOTION_CONTENT_SCREEN_RTC, int *)
+#define AOM_CTRL_AV1E_GET_HIGH_MOTION_CONTENT_SCREEN_RTC
+
+AOM_CTRL_USE_TYPE(AV1E_SET_POSTENCODE_DROP_RTC, int)
+#define AOM_CTRL_AV1E_SET_POSTENCODE_DROP_RTC
+
+AOM_CTRL_USE_TYPE(AV1E_SET_MAX_CONSEC_FRAME_DROP_MS_CBR, int)
+#define AOM_CTRL_AV1E_SET_MAX_CONSEC_FRAME_DROP_MS_CBR
+
+/*!\endcond */
+/*! @} - end defgroup aom_encoder */
+#ifdef __cplusplus
+}  // extern "C"
+#endif
+
+#endif  // AOM_AOM_AOMCX_H_