@portrayal/juniper-mx960 0.0.0-stage → 5.0.2

package/mx960.base.left.elements.json

@@ -0,0 +1 @@
+{"components":{},"config":"base","configs":["ac","base"],"device":"mx960","device-version":"5.0.1","elements":[{"box":{"h":704.9,"w":584.2,"x":0.0,"y":0.0},"class":"chassis","id":"chassis-faceplate","parent":null,"path":"chassis"}],"generator":{"tool":"portrayal-render","version":"0.2.0"},"source-sha256":"e1d027c8ec84333ab12f1762068c1182b8a30e772de600a61c234a6e39e53340","view":"left","viewBox":[0.0,0.0,584.2,704.9]}

package/mx960.base.left.svg

@@ -0,0 +1,48 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg xmlns="http://www.w3.org/2000/svg" width="584.2mm" height="704.9mm" viewBox="0 0 584.2 704.9" data-device="mx960" data-view="left" data-weight-max-kg="169.64" data-power-typical-w="6520" data-power-envelope="unstated" data-power-typical-scope="AC typical power draw from the MX Series family datasheet, which names no configuration, ambient or side; DC 6670 W" data-base-system-w="50" data-cooling-system-w="640 W high-capacity at full speed (450 W typical at normal speed); normal-capacity 600 W (400 W typical) - Table 95" data-max-thermal-output="AC 27,007 BTU/h (7920 W); DC 18,987 BTU/h (5568 W) (Table 84; provisioning ceiling)">
+  <style>
+    [data-path] { cursor: pointer; }
+    .state-on    { --led-color: #22c55e; }
+    .state-up    { --led-color: #22c55e; }
+    /* link and up are the same fact on an Ethernet lamp; see docs/rj45-family-design.md */
+    .state-link  { --led-color: #22c55e; }
+    .state-activity { --led-color: #86efac; }
+    .state-ok    { --led-color: #22c55e; }
+    .state-fault { --led-color: #ef4444; }
+    .state-fail  { --led-color: #ef4444; }
+    .state-locate { --led-color: #3b82f6; }
+    .state-absent { opacity: 0.35; }
+    /* A SWITCHED OUTLET WITH NO LAMP is dimmed when it is off, as absent is but
+       less (docs/pdu-model-design.md section 3.2): every switched PDU in the
+       library has a lamp per outlet, and this is the fallback so the first one
+       without does not invent a lamp. An outlet a lamp is bound to by `for:`
+       carries data-lamped (mark_lamped) and is never dimmed: its lamp says it. */
+    [data-class='inlet'][data-states~='off'].state-off:not([data-lamped]) { opacity: 0.55; }
+    /* A state is a colour AND a behaviour. Solid and blinking of the same colour
+       are different facts on real hardware: on the S9510-28DC a solid green PWR
+       is "system power good" and a blinking green PWR is "power good but BMC
+       power fail". A blinking state that renders solid is the same failure as a
+       state class nothing paints - it looks modelled and is not.
+       blink animates opacity rather than fill, because each skin carries its own
+       unlit colour in the fill fallback and a keyframe cannot name it. alternate
+       animates fill, because two colours is the whole point, and takes its first
+       value from the element's own fill. */
+    @keyframes portrayal-blink {
+      0%, 49.9% { opacity: 1; }
+      50%, 100% { opacity: 0; }
+    }
+    @keyframes portrayal-alternate {
+      0%, 49.9% { fill: var(--led-color, #3a3f44); }
+      50%, 100% { fill: var(--led-color-alt, #3a3f44); }
+    }
+    .portrayal-highlight { filter: drop-shadow(0 0 1.2px #f59e0b) drop-shadow(0 0 0.5px #f59e0b); }
+    .portrayal-dim { opacity: 0.25; }
+    [data-class='region'].portrayal-highlight { stroke: #f59e0b; stroke-width: 0.7; filter: none; }
+    .state-fail[data-class='psu'], .state-fail[data-class='fan'] { filter: drop-shadow(0 0 1.4px #ef4444); }
+</style>
+  <metadata>{"device":"Juniper MX960","device-version":"5.0.1","generator":{"tool":"portrayal-render","version":"0.2.0"},"resolved-components":{},"source-sha256":"e1d027c8ec84333ab12f1762068c1182b8a30e772de600a61c234a6e39e53340","view":"left"}</metadata>
+  <rect id="chassis-faceplate" data-path="chassis" data-class="chassis" data-model="MX960" x="0" y="0" width="584.2" height="704.9" rx="1.2" fill="#3a3e43" stroke="#22262a" stroke-width="0.5" />
+  <g id="--decor" data-class="decor">
+    <rect id="plate-0" data-kind="plate" x="0" y="330" width="584.2" height="30" rx="0.6" fill="#33373c" />
+  </g>
+</svg>

package/mx960.base.rear.elements.json

@@ -0,0 +1 @@
+{"components":{"juniper/mx960-psu-ac@1":"1.0.1","std/c20-inlet@1":"1.4.0"},"config":"base","configs":["ac","base"],"device":"mx960","device-version":"5.0.1","elements":[{"box":{"h":704.9,"w":441.1,"x":0.0,"y":0.0},"class":"chassis","id":"chassis-faceplate","parent":null,"path":"chassis"},{"box":{"h":24.4,"w":32.4,"x":26.0,"y":105.0},"class":"cutout","id":"cutout--inlet-0","parent":"inlet-0","path":"cutout:inlet-0"},{"box":{"h":24.4,"w":32.4,"x":129.0,"y":105.0},"class":"cutout","id":"cutout--inlet-1","parent":"inlet-1","path":"cutout:inlet-1"},{"box":{"h":24.4,"w":32.4,"x":232.0,"y":105.0},"class":"cutout","id":"cutout--inlet-2","parent":"inlet-2","path":"cutout:inlet-2"},{"box":{"h":24.4,"w":32.4,"x":335.0,"y":105.0},"class":"cutout","id":"cutout--inlet-3","parent":"inlet-3","path":"cutout:inlet-3"},{"box":null,"class":"silkscreen","for":["pem0"],"group":"silkscreen","group-role":"marking","parent":"pem0","path":"silk:0"},{"box":null,"class":"silkscreen","for":["pem1"],"group":"silkscreen","group-role":"marking","parent":"pem1","path":"silk:1"},{"box":null,"class":"silkscreen","for":["pem2"],"group":"silkscreen","group-role":"marking","parent":"pem2","path":"silk:2"},{"box":null,"class":"silkscreen","for":["pem3"],"group":"silkscreen","group-role":"marking","parent":"pem3","path":"silk:3"},{"box":{"h":24.4,"w":32.4,"x":26.0,"y":105.0},"class":"inlet","connection-points":{"mate":{"at":[16.2,12.2],"dir":"front","face":[42.2,117.2]}},"for":["pem0"],"group":"inlets","group-role":"service","id":"inlet-0","media":"ac","parent":"pem0","path":"inlet-0","ref":"std/c20-inlet@1:1.4.0","rel-pos":"0"},{"box":{"h":24.4,"w":32.4,"x":26.0,"y":105.0},"class":"cutout","id":"inlet-0--opening","parent":"inlet-0","path":"inlet-0/opening"},{"box":{"h":24.4,"w":32.4,"x":129.0,"y":105.0},"class":"inlet","connection-points":{"mate":{"at":[16.2,12.2],"dir":"front","face":[145.2,117.2]}},"for":["pem1"],"group":"inlets","group-role":"service","id":"inlet-1","media":"ac","parent":"pem1","path":"inlet-1","ref":"std/c20-inlet@1:1.4.0","rel-pos":"1"},{"box":{"h":24.4,"w":32.4,"x":129.0,"y":105.0},"class":"cutout","id":"inlet-1--opening","parent":"inlet-1","path":"inlet-1/opening"},{"box":{"h":24.4,"w":32.4,"x":232.0,"y":105.0},"class":"inlet","connection-points":{"mate":{"at":[16.2,12.2],"dir":"front","face":[248.2,117.2]}},"for":["pem2"],"group":"inlets","group-role":"service","id":"inlet-2","media":"ac","parent":"pem2","path":"inlet-2","ref":"std/c20-inlet@1:1.4.0","rel-pos":"2"},{"box":{"h":24.4,"w":32.4,"x":232.0,"y":105.0},"class":"cutout","id":"inlet-2--opening","parent":"inlet-2","path":"inlet-2/opening"},{"box":{"h":24.4,"w":32.4,"x":335.0,"y":105.0},"class":"inlet","connection-points":{"mate":{"at":[16.2,12.2],"dir":"front","face":[351.2,117.2]}},"for":["pem3"],"group":"inlets","group-role":"service","id":"inlet-3","media":"ac","parent":"pem3","path":"inlet-3","ref":"std/c20-inlet@1:1.4.0","rel-pos":"3"},{"box":{"h":24.4,"w":32.4,"x":335.0,"y":105.0},"class":"cutout","id":"inlet-3--opening","parent":"inlet-3","path":"inlet-3/opening"},{"box":{"h":480.0,"w":103.0,"x":14.5,"y":158.0},"class":"bay","group":"psus","group-role":"service","id":"pem0","parent":null,"path":"pem0","rel-pos":"0"},{"box":{"h":480.0,"w":103.0,"x":14.5,"y":158.0},"class":"psu","id":"pem0--module","parent":"pem0","path":"pem0/module","ref":"juniper/mx960-psu-ac@1:1.0.1","seat":"pem0","states":["ok","fault","absent"]},{"box":{"h":480.0,"w":103.0,"x":117.5,"y":158.0},"class":"bay","group":"psus","group-role":"service","id":"pem1","parent":null,"path":"pem1","rel-pos":"1"},{"box":{"h":480.0,"w":103.0,"x":117.5,"y":158.0},"class":"psu","id":"pem1--module","parent":"pem1","path":"pem1/module","ref":"juniper/mx960-psu-ac@1:1.0.1","seat":"pem1","states":["ok","fault","absent"]},{"box":{"h":480.0,"w":103.0,"x":220.5,"y":158.0},"class":"bay","group":"psus","group-role":"service","id":"pem2","parent":null,"path":"pem2","rel-pos":"2"},{"box":{"h":480.0,"w":103.0,"x":220.5,"y":158.0},"class":"psu","id":"pem2--module","parent":"pem2","path":"pem2/module","ref":"juniper/mx960-psu-ac@1:1.0.1","seat":"pem2","states":["ok","fault","absent"]},{"box":{"h":480.0,"w":103.0,"x":323.5,"y":158.0},"class":"bay","group":"psus","group-role":"service","id":"pem3","parent":null,"path":"pem3","rel-pos":"3"},{"box":{"h":480.0,"w":103.0,"x":323.5,"y":158.0},"class":"psu","id":"pem3--module","parent":"pem3","path":"pem3/module","ref":"juniper/mx960-psu-ac@1:1.0.1","seat":"pem3","states":["ok","fault","absent"]}],"generator":{"tool":"portrayal-render","version":"0.2.0"},"source-sha256":"e1d027c8ec84333ab12f1762068c1182b8a30e772de600a61c234a6e39e53340","view":"rear","viewBox":[0.0,0.0,441.1,704.9]}

package/mx960.base.rear.svg

@@ -0,0 +1,284 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg xmlns="http://www.w3.org/2000/svg" width="441.1mm" height="704.9mm" viewBox="0 0 441.1 704.9" data-device="mx960" data-view="rear" data-weight-max-kg="169.64" data-power-typical-w="6520" data-power-envelope="unstated" data-power-typical-scope="AC typical power draw from the MX Series family datasheet, which names no configuration, ambient or side; DC 6670 W" data-base-system-w="50" data-cooling-system-w="640 W high-capacity at full speed (450 W typical at normal speed); normal-capacity 600 W (400 W typical) - Table 95" data-max-thermal-output="AC 27,007 BTU/h (7920 W); DC 18,987 BTU/h (5568 W) (Table 84; provisioning ceiling)">
+  <style>
+    [data-path] { cursor: pointer; }
+    .state-on    { --led-color: #22c55e; }
+    .state-up    { --led-color: #22c55e; }
+    /* link and up are the same fact on an Ethernet lamp; see docs/rj45-family-design.md */
+    .state-link  { --led-color: #22c55e; }
+    .state-activity { --led-color: #86efac; }
+    .state-ok    { --led-color: #22c55e; }
+    .state-fault { --led-color: #ef4444; }
+    .state-fail  { --led-color: #ef4444; }
+    .state-locate { --led-color: #3b82f6; }
+    .state-absent { opacity: 0.35; }
+    /* A SWITCHED OUTLET WITH NO LAMP is dimmed when it is off, as absent is but
+       less (docs/pdu-model-design.md section 3.2): every switched PDU in the
+       library has a lamp per outlet, and this is the fallback so the first one
+       without does not invent a lamp. An outlet a lamp is bound to by `for:`
+       carries data-lamped (mark_lamped) and is never dimmed: its lamp says it. */
+    [data-class='inlet'][data-states~='off'].state-off:not([data-lamped]) { opacity: 0.55; }
+    /* A state is a colour AND a behaviour. Solid and blinking of the same colour
+       are different facts on real hardware: on the S9510-28DC a solid green PWR
+       is "system power good" and a blinking green PWR is "power good but BMC
+       power fail". A blinking state that renders solid is the same failure as a
+       state class nothing paints - it looks modelled and is not.
+       blink animates opacity rather than fill, because each skin carries its own
+       unlit colour in the fill fallback and a keyframe cannot name it. alternate
+       animates fill, because two colours is the whole point, and takes its first
+       value from the element's own fill. */
+    @keyframes portrayal-blink {
+      0%, 49.9% { opacity: 1; }
+      50%, 100% { opacity: 0; }
+    }
+    @keyframes portrayal-alternate {
+      0%, 49.9% { fill: var(--led-color, #3a3f44); }
+      50%, 100% { fill: var(--led-color-alt, #3a3f44); }
+    }
+    .portrayal-highlight { filter: drop-shadow(0 0 1.2px #f59e0b) drop-shadow(0 0 0.5px #f59e0b); }
+    .portrayal-dim { opacity: 0.25; }
+    [data-class='region'].portrayal-highlight { stroke: #f59e0b; stroke-width: 0.7; filter: none; }
+    .state-fail[data-class='psu'], .state-fail[data-class='fan'] { filter: drop-shadow(0 0 1.4px #ef4444); }
+</style>
+  <metadata>{"device":"Juniper MX960","device-version":"5.0.1","generator":{"tool":"portrayal-render","version":"0.2.0"},"resolved-components":{"juniper/mx960-psu-ac@1":"1.0.1","std/c20-inlet@1":"1.4.0"},"source-sha256":"e1d027c8ec84333ab12f1762068c1182b8a30e772de600a61c234a6e39e53340","view":"rear"}</metadata>
+  <rect id="chassis-faceplate" data-path="chassis" data-class="chassis" data-model="MX960" x="0" y="0" width="441.1" height="704.9" rx="1.2" fill="#3a3e43" stroke="#22262a" stroke-width="0.5" />
+  <defs>
+    <pattern id="portrayal-holes" width="5" height="5" patternUnits="userSpaceOnUse">
+      <circle cx="2.5" cy="2.5" r="1.1" fill="#3c4046" />
+    </pattern>
+  </defs>
+  <g id="--decor" data-class="decor">
+    <rect id="holes-field-0" data-kind="holes-field" x="10" y="4" width="421.1" height="86" rx="0.6" fill="url(#portrayal-holes)" />
+    <rect id="plate-0" data-kind="plate" x="4" y="94" width="433.1" height="42" rx="0.6" fill="#8a8f95" />
+    <rect id="holes-field-1" data-kind="holes-field" x="10" y="138" width="421.1" height="16" rx="0.6" fill="url(#portrayal-holes)" />
+    <rect id="plate-1" data-kind="plate" x="66" y="108" width="16" height="12" rx="1.4" fill="#111214" />
+    <rect id="plate-2" data-kind="plate" x="70.2" y="109.6" width="7.6" height="8.8" rx="1" fill="#565b61" />
+    <rect id="plate-3" data-kind="plate" x="169" y="108" width="16" height="12" rx="1.4" fill="#111214" />
+    <rect id="plate-4" data-kind="plate" x="173.2" y="109.6" width="7.6" height="8.8" rx="1" fill="#565b61" />
+    <rect id="plate-5" data-kind="plate" x="272" y="108" width="16" height="12" rx="1.4" fill="#111214" />
+    <rect id="plate-6" data-kind="plate" x="276.2" y="109.6" width="7.6" height="8.8" rx="1" fill="#565b61" />
+    <rect id="plate-7" data-kind="plate" x="375" y="108" width="16" height="12" rx="1.4" fill="#111214" />
+    <rect id="plate-8" data-kind="plate" x="379.2" y="109.6" width="7.6" height="8.8" rx="1" fill="#565b61" />
+    <rect id="plate-9" data-kind="plate" x="4" y="642" width="433.1" height="58" rx="0.6" fill="#cfc9b8" />
+    <rect id="plate-10" data-kind="plate" x="42" y="656" width="30" height="30" rx="15" fill="#b8b2a0" />
+    <rect id="plate-11" data-kind="plate" x="145" y="656" width="30" height="30" rx="15" fill="#b8b2a0" />
+    <rect id="plate-12" data-kind="plate" x="248" y="656" width="30" height="30" rx="15" fill="#b8b2a0" />
+    <rect id="plate-13" data-kind="plate" x="351" y="656" width="30" height="30" rx="15" fill="#b8b2a0" />
+  </g>
+  <g id="--cutouts" data-class="cutouts">
+    <rect x="26" y="105" width="32.4" height="24.4" fill="#101214" id="cutout--inlet-0" data-path="cutout:inlet-0" data-class="cutout" />
+    <rect x="129" y="105" width="32.4" height="24.4" fill="#101214" id="cutout--inlet-1" data-path="cutout:inlet-1" data-class="cutout" />
+    <rect x="232" y="105" width="32.4" height="24.4" fill="#101214" id="cutout--inlet-2" data-path="cutout:inlet-2" data-class="cutout" />
+    <rect x="335" y="105" width="32.4" height="24.4" fill="#101214" id="cutout--inlet-3" data-path="cutout:inlet-3" data-class="cutout" />
+  </g>
+  <g id="--silkscreen" data-class="silkscreen">
+    <text x="74" y="106.2" font-family="sans-serif" font-size="1.3" text-anchor="middle" fill="#e8eaec" data-path="silk:0" data-class="silkscreen" data-group="silkscreen" data-group-role="marking" data-for="pem0">I / O</text>
+    <text x="177" y="106.2" font-family="sans-serif" font-size="1.3" text-anchor="middle" fill="#e8eaec" data-path="silk:1" data-class="silkscreen" data-group="silkscreen" data-group-role="marking" data-for="pem1">I / O</text>
+    <text x="280" y="106.2" font-family="sans-serif" font-size="1.3" text-anchor="middle" fill="#e8eaec" data-path="silk:2" data-class="silkscreen" data-group="silkscreen" data-group-role="marking" data-for="pem2">I / O</text>
+    <text x="383" y="106.2" font-family="sans-serif" font-size="1.3" text-anchor="middle" fill="#e8eaec" data-path="silk:3" data-class="silkscreen" data-group="silkscreen" data-group-role="marking" data-for="pem3">I / O</text>
+  </g>
+  <g id="inlet-0" data-path="inlet-0" data-class="inlet" data-ref="std/c20-inlet@1:1.4.0" data-depth="19.0" data-wall="#141619" data-cavity="inlet-face" data-function="AC inlet PEM 0" data-input="ac" data-media="ac" data-rel-pos="0" transform="translate(26.0,105.0)" data-group="inlets" data-group-role="service" data-description="the four C20 receptacles at the rear, one per PEM. A separate group from `psus` because they are separate objects - the inlet is the cord's end and stays with the chassis while a PEM comes out - and because sharing `psus` would put two things at every rel-pos 0-3." data-for="pem0">
+    <title>inlet-0</title>
+    <rect id="inlet-0--opening" x="0" y="0" width="32.4" height="24.4" rx="4.5" fill="#17191c" data-path="inlet-0/opening" data-class="cutout" />
+    <rect id="inlet-0--inlet-face" x="1.7" y="1.7" width="29.0" height="21.0" rx="2.2" fill="#0d0f11" />
+    <rect id="inlet-0--pin-earth" x="13.1" y="7.1" width="6.2" height="2.2" rx="0.3" fill="#7a8087" data-z-top="17.0" data-z-color="#c0c5cb" />
+    <rect id="inlet-0--pin-line" x="7.05" y="15.1" width="5.3" height="2.2" rx="0.3" fill="#7a8087" data-z-top="17.0" data-z-color="#c0c5cb" />
+    <rect id="inlet-0--pin-neutral" x="20.05" y="15.1" width="5.3" height="2.2" rx="0.3" fill="#7a8087" data-z-top="17.0" data-z-color="#c0c5cb" />
+    <g data-cp="mate" data-cp-at="16.2 12.2" data-cp-dir="front" />
+  </g>
+  <g id="inlet-1" data-path="inlet-1" data-class="inlet" data-ref="std/c20-inlet@1:1.4.0" data-depth="19.0" data-wall="#141619" data-cavity="inlet-face" data-function="AC inlet PEM 1" data-input="ac" data-media="ac" data-rel-pos="1" transform="translate(129.0,105.0)" data-group="inlets" data-group-role="service" data-description="the four C20 receptacles at the rear, one per PEM. A separate group from `psus` because they are separate objects - the inlet is the cord's end and stays with the chassis while a PEM comes out - and because sharing `psus` would put two things at every rel-pos 0-3." data-for="pem1">
+    <title>inlet-1</title>
+    <rect id="inlet-1--opening" x="0" y="0" width="32.4" height="24.4" rx="4.5" fill="#17191c" data-path="inlet-1/opening" data-class="cutout" />
+    <rect id="inlet-1--inlet-face" x="1.7" y="1.7" width="29.0" height="21.0" rx="2.2" fill="#0d0f11" />
+    <rect id="inlet-1--pin-earth" x="13.1" y="7.1" width="6.2" height="2.2" rx="0.3" fill="#7a8087" data-z-top="17.0" data-z-color="#c0c5cb" />
+    <rect id="inlet-1--pin-line" x="7.05" y="15.1" width="5.3" height="2.2" rx="0.3" fill="#7a8087" data-z-top="17.0" data-z-color="#c0c5cb" />
+    <rect id="inlet-1--pin-neutral" x="20.05" y="15.1" width="5.3" height="2.2" rx="0.3" fill="#7a8087" data-z-top="17.0" data-z-color="#c0c5cb" />
+    <g data-cp="mate" data-cp-at="16.2 12.2" data-cp-dir="front" />
+  </g>
+  <g id="inlet-2" data-path="inlet-2" data-class="inlet" data-ref="std/c20-inlet@1:1.4.0" data-depth="19.0" data-wall="#141619" data-cavity="inlet-face" data-function="AC inlet PEM 2" data-input="ac" data-media="ac" data-rel-pos="2" transform="translate(232.0,105.0)" data-group="inlets" data-group-role="service" data-description="the four C20 receptacles at the rear, one per PEM. A separate group from `psus` because they are separate objects - the inlet is the cord's end and stays with the chassis while a PEM comes out - and because sharing `psus` would put two things at every rel-pos 0-3." data-for="pem2">
+    <title>inlet-2</title>
+    <rect id="inlet-2--opening" x="0" y="0" width="32.4" height="24.4" rx="4.5" fill="#17191c" data-path="inlet-2/opening" data-class="cutout" />
+    <rect id="inlet-2--inlet-face" x="1.7" y="1.7" width="29.0" height="21.0" rx="2.2" fill="#0d0f11" />
+    <rect id="inlet-2--pin-earth" x="13.1" y="7.1" width="6.2" height="2.2" rx="0.3" fill="#7a8087" data-z-top="17.0" data-z-color="#c0c5cb" />
+    <rect id="inlet-2--pin-line" x="7.05" y="15.1" width="5.3" height="2.2" rx="0.3" fill="#7a8087" data-z-top="17.0" data-z-color="#c0c5cb" />
+    <rect id="inlet-2--pin-neutral" x="20.05" y="15.1" width="5.3" height="2.2" rx="0.3" fill="#7a8087" data-z-top="17.0" data-z-color="#c0c5cb" />
+    <g data-cp="mate" data-cp-at="16.2 12.2" data-cp-dir="front" />
+  </g>
+  <g id="inlet-3" data-path="inlet-3" data-class="inlet" data-ref="std/c20-inlet@1:1.4.0" data-depth="19.0" data-wall="#141619" data-cavity="inlet-face" data-function="AC inlet PEM 3" data-input="ac" data-media="ac" data-rel-pos="3" transform="translate(335.0,105.0)" data-group="inlets" data-group-role="service" data-description="the four C20 receptacles at the rear, one per PEM. A separate group from `psus` because they are separate objects - the inlet is the cord's end and stays with the chassis while a PEM comes out - and because sharing `psus` would put two things at every rel-pos 0-3." data-for="pem3">
+    <title>inlet-3</title>
+    <rect id="inlet-3--opening" x="0" y="0" width="32.4" height="24.4" rx="4.5" fill="#17191c" data-path="inlet-3/opening" data-class="cutout" />
+    <rect id="inlet-3--inlet-face" x="1.7" y="1.7" width="29.0" height="21.0" rx="2.2" fill="#0d0f11" />
+    <rect id="inlet-3--pin-earth" x="13.1" y="7.1" width="6.2" height="2.2" rx="0.3" fill="#7a8087" data-z-top="17.0" data-z-color="#c0c5cb" />
+    <rect id="inlet-3--pin-line" x="7.05" y="15.1" width="5.3" height="2.2" rx="0.3" fill="#7a8087" data-z-top="17.0" data-z-color="#c0c5cb" />
+    <rect id="inlet-3--pin-neutral" x="20.05" y="15.1" width="5.3" height="2.2" rx="0.3" fill="#7a8087" data-z-top="17.0" data-z-color="#c0c5cb" />
+    <g data-cp="mate" data-cp-at="16.2 12.2" data-cp-dir="front" />
+  </g>
+  <g id="pem0" data-path="pem0" data-class="bay" data-group="psus" data-group-role="service" data-rel-pos="0">
+    <title>pem0</title>
+    <rect id="pem0--opening" x="14.5" y="158" width="103" height="480" fill="#101214" />
+    <g id="pem0--module" data-path="pem0/module" data-class="psu" data-behaviour="fills" data-ref="juniper/mx960-psu-ac@1:1.0.1" data-inlet="none" data-model="MX960 AC PSU" data-power-output-w="1700" data-redundancy="2+2" data-role="ac-power-supply" data-states="ok fault absent" transform="translate(66,398) translate(-51.5,-240)">
+      <title>pem0--module</title>
+      <rect id="pem0--module--face" x="0" y="0" width="103.0" height="480.0" rx="1.0" fill="#a7abaf" stroke="#8a8f95" stroke-width="0.5" />
+      <g id="pem0--module--up-chip">
+        <rect x="41.0" y="28.0" width="21.0" height="26.0" rx="1.2" fill="#f0f1f2" stroke="#c0c4c8" stroke-width="0.4" />
+        <path d="M 51.5 34.0 l 5.0 8.0 l -3.0 0 l 0 6.0 l -4.0 0 l 0 -6.0 l -3.0 0 Z" fill="#6d7278" />
+        <g id="pem0--module--up-silkscreen">
+          <text x="51.5" y="51.5" font-family="Arial" font-size="3.0" fill="#6d7278" text-anchor="middle">UP</text>
+        </g>
+      </g>
+      <g id="pem0--module--handle">
+        <rect x="41.0" y="230.0" width="21.0" height="42.0" rx="7.0" fill="none" stroke="#565b61" stroke-width="3.2" />
+      </g>
+      <g id="pem0--module--label-patch">
+        <rect x="12.0" y="290.0" width="30.0" height="150.0" rx="1.6" fill="#f0f1f2" stroke="#c0c4c8" stroke-width="0.4" />
+        <rect x="52.0" y="330.0" width="38.0" height="70.0" rx="1.6" fill="#e6e8ea" stroke="#c0c4c8" stroke-width="0.4" />
+      </g>
+      <g id="pem0--module--lamps">
+        <circle id="pem0--module--led-ps-fail" cx="40.0" cy="452.0" r="1.1" fill="#0f1113" stroke="#33373c" stroke-width="0.25" />
+        <circle id="pem0--module--led-dc-ok" cx="50.0" cy="452.0" r="1.1" fill="#0f1113" stroke="#33373c" stroke-width="0.25" />
+        <circle id="pem0--module--led-ac-ok" cx="60.0" cy="452.0" r="1.1" fill="var(--led-color, #3a3f44)" stroke="#33373c" stroke-width="0.25" />
+      </g>
+      <g id="pem0--module--fan">
+        <circle cx="51.5" cy="466.0" r="9.5" fill="#26292d" stroke="#17191c" stroke-width="0.5" />
+        <circle cx="51.5" cy="466.0" r="2.6" fill="#44484d" />
+      </g>
+      <g id="pem0--module--silkscreen">
+        <g id="pem0--module--t89-silkscreen">
+          <text x="40.0" y="448.4" font-family="Arial" font-size="0.9" fill="#3a3e43" text-anchor="middle">PS</text>
+        </g>
+        <g id="pem0--module--t90-silkscreen">
+          <text x="50.0" y="448.4" font-family="Arial" font-size="0.9" fill="#3a3e43" text-anchor="middle">DC</text>
+        </g>
+        <g id="pem0--module--t91-silkscreen">
+          <text x="60.0" y="448.4" font-family="Arial" font-size="0.9" fill="#3a3e43" text-anchor="middle">AC</text>
+        </g>
+      </g>
+    </g>
+  </g>
+  <g id="pem1" data-path="pem1" data-class="bay" data-group="psus" data-group-role="service" data-rel-pos="1">
+    <title>pem1</title>
+    <rect id="pem1--opening" x="117.5" y="158" width="103" height="480" fill="#101214" />
+    <g id="pem1--module" data-path="pem1/module" data-class="psu" data-behaviour="fills" data-ref="juniper/mx960-psu-ac@1:1.0.1" data-inlet="none" data-model="MX960 AC PSU" data-power-output-w="1700" data-redundancy="2+2" data-role="ac-power-supply" data-states="ok fault absent" transform="translate(169,398) translate(-51.5,-240)">
+      <title>pem1--module</title>
+      <rect id="pem1--module--face" x="0" y="0" width="103.0" height="480.0" rx="1.0" fill="#a7abaf" stroke="#8a8f95" stroke-width="0.5" />
+      <g id="pem1--module--up-chip">
+        <rect x="41.0" y="28.0" width="21.0" height="26.0" rx="1.2" fill="#f0f1f2" stroke="#c0c4c8" stroke-width="0.4" />
+        <path d="M 51.5 34.0 l 5.0 8.0 l -3.0 0 l 0 6.0 l -4.0 0 l 0 -6.0 l -3.0 0 Z" fill="#6d7278" />
+        <g id="pem1--module--up-silkscreen">
+          <text x="51.5" y="51.5" font-family="Arial" font-size="3.0" fill="#6d7278" text-anchor="middle">UP</text>
+        </g>
+      </g>
+      <g id="pem1--module--handle">
+        <rect x="41.0" y="230.0" width="21.0" height="42.0" rx="7.0" fill="none" stroke="#565b61" stroke-width="3.2" />
+      </g>
+      <g id="pem1--module--label-patch">
+        <rect x="12.0" y="290.0" width="30.0" height="150.0" rx="1.6" fill="#f0f1f2" stroke="#c0c4c8" stroke-width="0.4" />
+        <rect x="52.0" y="330.0" width="38.0" height="70.0" rx="1.6" fill="#e6e8ea" stroke="#c0c4c8" stroke-width="0.4" />
+      </g>
+      <g id="pem1--module--lamps">
+        <circle id="pem1--module--led-ps-fail" cx="40.0" cy="452.0" r="1.1" fill="#0f1113" stroke="#33373c" stroke-width="0.25" />
+        <circle id="pem1--module--led-dc-ok" cx="50.0" cy="452.0" r="1.1" fill="#0f1113" stroke="#33373c" stroke-width="0.25" />
+        <circle id="pem1--module--led-ac-ok" cx="60.0" cy="452.0" r="1.1" fill="var(--led-color, #3a3f44)" stroke="#33373c" stroke-width="0.25" />
+      </g>
+      <g id="pem1--module--fan">
+        <circle cx="51.5" cy="466.0" r="9.5" fill="#26292d" stroke="#17191c" stroke-width="0.5" />
+        <circle cx="51.5" cy="466.0" r="2.6" fill="#44484d" />
+      </g>
+      <g id="pem1--module--silkscreen">
+        <g id="pem1--module--t89-silkscreen">
+          <text x="40.0" y="448.4" font-family="Arial" font-size="0.9" fill="#3a3e43" text-anchor="middle">PS</text>
+        </g>
+        <g id="pem1--module--t90-silkscreen">
+          <text x="50.0" y="448.4" font-family="Arial" font-size="0.9" fill="#3a3e43" text-anchor="middle">DC</text>
+        </g>
+        <g id="pem1--module--t91-silkscreen">
+          <text x="60.0" y="448.4" font-family="Arial" font-size="0.9" fill="#3a3e43" text-anchor="middle">AC</text>
+        </g>
+      </g>
+    </g>
+  </g>
+  <g id="pem2" data-path="pem2" data-class="bay" data-group="psus" data-group-role="service" data-rel-pos="2">
+    <title>pem2</title>
+    <rect id="pem2--opening" x="220.5" y="158" width="103" height="480" fill="#101214" />
+    <g id="pem2--module" data-path="pem2/module" data-class="psu" data-behaviour="fills" data-ref="juniper/mx960-psu-ac@1:1.0.1" data-inlet="none" data-model="MX960 AC PSU" data-power-output-w="1700" data-redundancy="2+2" data-role="ac-power-supply" data-states="ok fault absent" transform="translate(272,398) translate(-51.5,-240)">
+      <title>pem2--module</title>
+      <rect id="pem2--module--face" x="0" y="0" width="103.0" height="480.0" rx="1.0" fill="#a7abaf" stroke="#8a8f95" stroke-width="0.5" />
+      <g id="pem2--module--up-chip">
+        <rect x="41.0" y="28.0" width="21.0" height="26.0" rx="1.2" fill="#f0f1f2" stroke="#c0c4c8" stroke-width="0.4" />
+        <path d="M 51.5 34.0 l 5.0 8.0 l -3.0 0 l 0 6.0 l -4.0 0 l 0 -6.0 l -3.0 0 Z" fill="#6d7278" />
+        <g id="pem2--module--up-silkscreen">
+          <text x="51.5" y="51.5" font-family="Arial" font-size="3.0" fill="#6d7278" text-anchor="middle">UP</text>
+        </g>
+      </g>
+      <g id="pem2--module--handle">
+        <rect x="41.0" y="230.0" width="21.0" height="42.0" rx="7.0" fill="none" stroke="#565b61" stroke-width="3.2" />
+      </g>
+      <g id="pem2--module--label-patch">
+        <rect x="12.0" y="290.0" width="30.0" height="150.0" rx="1.6" fill="#f0f1f2" stroke="#c0c4c8" stroke-width="0.4" />
+        <rect x="52.0" y="330.0" width="38.0" height="70.0" rx="1.6" fill="#e6e8ea" stroke="#c0c4c8" stroke-width="0.4" />
+      </g>
+      <g id="pem2--module--lamps">
+        <circle id="pem2--module--led-ps-fail" cx="40.0" cy="452.0" r="1.1" fill="#0f1113" stroke="#33373c" stroke-width="0.25" />
+        <circle id="pem2--module--led-dc-ok" cx="50.0" cy="452.0" r="1.1" fill="#0f1113" stroke="#33373c" stroke-width="0.25" />
+        <circle id="pem2--module--led-ac-ok" cx="60.0" cy="452.0" r="1.1" fill="var(--led-color, #3a3f44)" stroke="#33373c" stroke-width="0.25" />
+      </g>
+      <g id="pem2--module--fan">
+        <circle cx="51.5" cy="466.0" r="9.5" fill="#26292d" stroke="#17191c" stroke-width="0.5" />
+        <circle cx="51.5" cy="466.0" r="2.6" fill="#44484d" />
+      </g>
+      <g id="pem2--module--silkscreen">
+        <g id="pem2--module--t89-silkscreen">
+          <text x="40.0" y="448.4" font-family="Arial" font-size="0.9" fill="#3a3e43" text-anchor="middle">PS</text>
+        </g>
+        <g id="pem2--module--t90-silkscreen">
+          <text x="50.0" y="448.4" font-family="Arial" font-size="0.9" fill="#3a3e43" text-anchor="middle">DC</text>
+        </g>
+        <g id="pem2--module--t91-silkscreen">
+          <text x="60.0" y="448.4" font-family="Arial" font-size="0.9" fill="#3a3e43" text-anchor="middle">AC</text>
+        </g>
+      </g>
+    </g>
+  </g>
+  <g id="pem3" data-path="pem3" data-class="bay" data-group="psus" data-group-role="service" data-rel-pos="3">
+    <title>pem3</title>
+    <rect id="pem3--opening" x="323.5" y="158" width="103" height="480" fill="#101214" />
+    <g id="pem3--module" data-path="pem3/module" data-class="psu" data-behaviour="fills" data-ref="juniper/mx960-psu-ac@1:1.0.1" data-inlet="none" data-model="MX960 AC PSU" data-power-output-w="1700" data-redundancy="2+2" data-role="ac-power-supply" data-states="ok fault absent" transform="translate(375,398) translate(-51.5,-240)">
+      <title>pem3--module</title>
+      <rect id="pem3--module--face" x="0" y="0" width="103.0" height="480.0" rx="1.0" fill="#a7abaf" stroke="#8a8f95" stroke-width="0.5" />
+      <g id="pem3--module--up-chip">
+        <rect x="41.0" y="28.0" width="21.0" height="26.0" rx="1.2" fill="#f0f1f2" stroke="#c0c4c8" stroke-width="0.4" />
+        <path d="M 51.5 34.0 l 5.0 8.0 l -3.0 0 l 0 6.0 l -4.0 0 l 0 -6.0 l -3.0 0 Z" fill="#6d7278" />
+        <g id="pem3--module--up-silkscreen">
+          <text x="51.5" y="51.5" font-family="Arial" font-size="3.0" fill="#6d7278" text-anchor="middle">UP</text>
+        </g>
+      </g>
+      <g id="pem3--module--handle">
+        <rect x="41.0" y="230.0" width="21.0" height="42.0" rx="7.0" fill="none" stroke="#565b61" stroke-width="3.2" />
+      </g>
+      <g id="pem3--module--label-patch">
+        <rect x="12.0" y="290.0" width="30.0" height="150.0" rx="1.6" fill="#f0f1f2" stroke="#c0c4c8" stroke-width="0.4" />
+        <rect x="52.0" y="330.0" width="38.0" height="70.0" rx="1.6" fill="#e6e8ea" stroke="#c0c4c8" stroke-width="0.4" />
+      </g>
+      <g id="pem3--module--lamps">
+        <circle id="pem3--module--led-ps-fail" cx="40.0" cy="452.0" r="1.1" fill="#0f1113" stroke="#33373c" stroke-width="0.25" />
+        <circle id="pem3--module--led-dc-ok" cx="50.0" cy="452.0" r="1.1" fill="#0f1113" stroke="#33373c" stroke-width="0.25" />
+        <circle id="pem3--module--led-ac-ok" cx="60.0" cy="452.0" r="1.1" fill="var(--led-color, #3a3f44)" stroke="#33373c" stroke-width="0.25" />
+      </g>
+      <g id="pem3--module--fan">
+        <circle cx="51.5" cy="466.0" r="9.5" fill="#26292d" stroke="#17191c" stroke-width="0.5" />
+        <circle cx="51.5" cy="466.0" r="2.6" fill="#44484d" />
+      </g>
+      <g id="pem3--module--silkscreen">
+        <g id="pem3--module--t89-silkscreen">
+          <text x="40.0" y="448.4" font-family="Arial" font-size="0.9" fill="#3a3e43" text-anchor="middle">PS</text>
+        </g>
+        <g id="pem3--module--t90-silkscreen">
+          <text x="50.0" y="448.4" font-family="Arial" font-size="0.9" fill="#3a3e43" text-anchor="middle">DC</text>
+        </g>
+        <g id="pem3--module--t91-silkscreen">
+          <text x="60.0" y="448.4" font-family="Arial" font-size="0.9" fill="#3a3e43" text-anchor="middle">AC</text>
+        </g>
+      </g>
+    </g>
+  </g>
+</svg>

package/mx960.base.right.elements.json

@@ -0,0 +1 @@
+{"components":{},"config":"base","configs":["ac","base"],"device":"mx960","device-version":"5.0.1","elements":[{"box":{"h":704.9,"w":584.2,"x":0.0,"y":0.0},"class":"chassis","id":"chassis-faceplate","parent":null,"path":"chassis"}],"generator":{"tool":"portrayal-render","version":"0.2.0"},"source-sha256":"e1d027c8ec84333ab12f1762068c1182b8a30e772de600a61c234a6e39e53340","view":"right","viewBox":[0.0,0.0,584.2,704.9]}

package/mx960.base.right.svg

@@ -0,0 +1,48 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg xmlns="http://www.w3.org/2000/svg" width="584.2mm" height="704.9mm" viewBox="0 0 584.2 704.9" data-device="mx960" data-view="right" data-weight-max-kg="169.64" data-power-typical-w="6520" data-power-envelope="unstated" data-power-typical-scope="AC typical power draw from the MX Series family datasheet, which names no configuration, ambient or side; DC 6670 W" data-base-system-w="50" data-cooling-system-w="640 W high-capacity at full speed (450 W typical at normal speed); normal-capacity 600 W (400 W typical) - Table 95" data-max-thermal-output="AC 27,007 BTU/h (7920 W); DC 18,987 BTU/h (5568 W) (Table 84; provisioning ceiling)">
+  <style>
+    [data-path] { cursor: pointer; }
+    .state-on    { --led-color: #22c55e; }
+    .state-up    { --led-color: #22c55e; }
+    /* link and up are the same fact on an Ethernet lamp; see docs/rj45-family-design.md */
+    .state-link  { --led-color: #22c55e; }
+    .state-activity { --led-color: #86efac; }
+    .state-ok    { --led-color: #22c55e; }
+    .state-fault { --led-color: #ef4444; }
+    .state-fail  { --led-color: #ef4444; }
+    .state-locate { --led-color: #3b82f6; }
+    .state-absent { opacity: 0.35; }
+    /* A SWITCHED OUTLET WITH NO LAMP is dimmed when it is off, as absent is but
+       less (docs/pdu-model-design.md section 3.2): every switched PDU in the
+       library has a lamp per outlet, and this is the fallback so the first one
+       without does not invent a lamp. An outlet a lamp is bound to by `for:`
+       carries data-lamped (mark_lamped) and is never dimmed: its lamp says it. */
+    [data-class='inlet'][data-states~='off'].state-off:not([data-lamped]) { opacity: 0.55; }
+    /* A state is a colour AND a behaviour. Solid and blinking of the same colour
+       are different facts on real hardware: on the S9510-28DC a solid green PWR
+       is "system power good" and a blinking green PWR is "power good but BMC
+       power fail". A blinking state that renders solid is the same failure as a
+       state class nothing paints - it looks modelled and is not.
+       blink animates opacity rather than fill, because each skin carries its own
+       unlit colour in the fill fallback and a keyframe cannot name it. alternate
+       animates fill, because two colours is the whole point, and takes its first
+       value from the element's own fill. */
+    @keyframes portrayal-blink {
+      0%, 49.9% { opacity: 1; }
+      50%, 100% { opacity: 0; }
+    }
+    @keyframes portrayal-alternate {
+      0%, 49.9% { fill: var(--led-color, #3a3f44); }
+      50%, 100% { fill: var(--led-color-alt, #3a3f44); }
+    }
+    .portrayal-highlight { filter: drop-shadow(0 0 1.2px #f59e0b) drop-shadow(0 0 0.5px #f59e0b); }
+    .portrayal-dim { opacity: 0.25; }
+    [data-class='region'].portrayal-highlight { stroke: #f59e0b; stroke-width: 0.7; filter: none; }
+    .state-fail[data-class='psu'], .state-fail[data-class='fan'] { filter: drop-shadow(0 0 1.4px #ef4444); }
+</style>
+  <metadata>{"device":"Juniper MX960","device-version":"5.0.1","generator":{"tool":"portrayal-render","version":"0.2.0"},"resolved-components":{},"source-sha256":"e1d027c8ec84333ab12f1762068c1182b8a30e772de600a61c234a6e39e53340","view":"right"}</metadata>
+  <rect id="chassis-faceplate" data-path="chassis" data-class="chassis" data-model="MX960" x="0" y="0" width="584.2" height="704.9" rx="1.2" fill="#3a3e43" stroke="#22262a" stroke-width="0.5" />
+  <g id="--decor" data-class="decor">
+    <rect id="plate-0" data-kind="plate" x="0" y="330" width="584.2" height="30" rx="0.6" fill="#33373c" />
+  </g>
+</svg>

package/mx960.base.top.elements.json

@@ -0,0 +1 @@
+{"components":{},"config":"base","configs":["ac","base"],"device":"mx960","device-version":"5.0.1","elements":[{"box":{"h":584.2,"w":441.1,"x":0.0,"y":0.0},"class":"chassis","id":"chassis-faceplate","parent":null,"path":"chassis"}],"generator":{"tool":"portrayal-render","version":"0.2.0"},"source-sha256":"e1d027c8ec84333ab12f1762068c1182b8a30e772de600a61c234a6e39e53340","view":"top","viewBox":[0.0,0.0,441.1,584.2]}

package/mx960.base.top.svg

@@ -0,0 +1,53 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg xmlns="http://www.w3.org/2000/svg" width="441.1mm" height="584.2mm" viewBox="0 0 441.1 584.2" data-device="mx960" data-view="top" data-weight-max-kg="169.64" data-power-typical-w="6520" data-power-envelope="unstated" data-power-typical-scope="AC typical power draw from the MX Series family datasheet, which names no configuration, ambient or side; DC 6670 W" data-base-system-w="50" data-cooling-system-w="640 W high-capacity at full speed (450 W typical at normal speed); normal-capacity 600 W (400 W typical) - Table 95" data-max-thermal-output="AC 27,007 BTU/h (7920 W); DC 18,987 BTU/h (5568 W) (Table 84; provisioning ceiling)">
+  <style>
+    [data-path] { cursor: pointer; }
+    .state-on    { --led-color: #22c55e; }
+    .state-up    { --led-color: #22c55e; }
+    /* link and up are the same fact on an Ethernet lamp; see docs/rj45-family-design.md */
+    .state-link  { --led-color: #22c55e; }
+    .state-activity { --led-color: #86efac; }
+    .state-ok    { --led-color: #22c55e; }
+    .state-fault { --led-color: #ef4444; }
+    .state-fail  { --led-color: #ef4444; }
+    .state-locate { --led-color: #3b82f6; }
+    .state-absent { opacity: 0.35; }
+    /* A SWITCHED OUTLET WITH NO LAMP is dimmed when it is off, as absent is but
+       less (docs/pdu-model-design.md section 3.2): every switched PDU in the
+       library has a lamp per outlet, and this is the fallback so the first one
+       without does not invent a lamp. An outlet a lamp is bound to by `for:`
+       carries data-lamped (mark_lamped) and is never dimmed: its lamp says it. */
+    [data-class='inlet'][data-states~='off'].state-off:not([data-lamped]) { opacity: 0.55; }
+    /* A state is a colour AND a behaviour. Solid and blinking of the same colour
+       are different facts on real hardware: on the S9510-28DC a solid green PWR
+       is "system power good" and a blinking green PWR is "power good but BMC
+       power fail". A blinking state that renders solid is the same failure as a
+       state class nothing paints - it looks modelled and is not.
+       blink animates opacity rather than fill, because each skin carries its own
+       unlit colour in the fill fallback and a keyframe cannot name it. alternate
+       animates fill, because two colours is the whole point, and takes its first
+       value from the element's own fill. */
+    @keyframes portrayal-blink {
+      0%, 49.9% { opacity: 1; }
+      50%, 100% { opacity: 0; }
+    }
+    @keyframes portrayal-alternate {
+      0%, 49.9% { fill: var(--led-color, #3a3f44); }
+      50%, 100% { fill: var(--led-color-alt, #3a3f44); }
+    }
+    .portrayal-highlight { filter: drop-shadow(0 0 1.2px #f59e0b) drop-shadow(0 0 0.5px #f59e0b); }
+    .portrayal-dim { opacity: 0.25; }
+    [data-class='region'].portrayal-highlight { stroke: #f59e0b; stroke-width: 0.7; filter: none; }
+    .state-fail[data-class='psu'], .state-fail[data-class='fan'] { filter: drop-shadow(0 0 1.4px #ef4444); }
+</style>
+  <metadata>{"device":"Juniper MX960","device-version":"5.0.1","generator":{"tool":"portrayal-render","version":"0.2.0"},"resolved-components":{},"source-sha256":"e1d027c8ec84333ab12f1762068c1182b8a30e772de600a61c234a6e39e53340","view":"top"}</metadata>
+  <rect id="chassis-faceplate" data-path="chassis" data-class="chassis" data-model="MX960" x="0" y="0" width="441.1" height="584.2" rx="1.2" fill="#3a3e43" stroke="#22262a" stroke-width="0.5" />
+  <defs>
+    <pattern id="portrayal-holes" width="5" height="5" patternUnits="userSpaceOnUse">
+      <circle cx="2.5" cy="2.5" r="1.1" fill="#3c4046" />
+    </pattern>
+  </defs>
+  <g id="--decor" data-class="decor">
+    <rect id="holes-field-0" data-kind="holes-field" x="40" y="420" width="361.1" height="140" rx="0.6" fill="url(#portrayal-holes)" />
+  </g>
+</svg>