@portrayal/juniper-mx304 0.0.0-stage → 4.0.2

package/mx304.source.json

@@ -0,0 +1,1290 @@
+{
+ "attrs": {
+  "environmental": {
+   "altitude": "no performance degradation to 1800 m",
+   "humidity": "5-90 percent noncondensing",
+   "operating-temp": "0 C to 40 C",
+   "storage-temp": "-40 C to 70 C in shipping container"
+  },
+  "features": {
+   "macsec": "inline MACsec on all ports at all speeds",
+   "redundancy": "full hardware redundancy - Routing Engines, power supplies and fans",
+   "timing": "1PPS and 10 MHz SMB input and output, ToD and BITS RJ45, GM/PTP SFP (1-GbE/10-GbE); BITS and GM/PTP currently reserved for future use per the guide"
+  },
+  "lifecycle": {
+   "eol": "none-announced"
+  },
+  "performance": {
+   "throughput": "4.8 Tbps system capacity; up to 12x400 Gbps or 48x100 Gbps ports (three LMICs)"
+  },
+  "physical": {
+   "depth-with-brackets": "782 mm over cable-management brackets, air filter and handles (Table 22)",
+   "weight": "32 kg fully loaded (two REs, two LMICs); 16 kg without FRUs (Table 22)"
+  },
+  "platform": {
+   "asic": "Juniper Trio 6 (one YT ASIC per LMIC)"
+  },
+  "power": {
+   "power-envelope": "fully-configured",
+   "power-max-w": 1436,
+   "power-typical-w": 1033
+  }
+ },
+ "chassis": {
+  "color": "#8b8f94",
+  "depth": 610.0,
+  "height": 88.9,
+  "ru": 2,
+  "width": 440.8
+ },
+ "configurations": {
+  "base": {
+   "bays": {
+    "lmic0": "juniper/jnp304-blnk@1",
+    "lmic1": "juniper/jnp304-blnk@1"
+   },
+   "default": true,
+   "description": "Chassis only - what you spec before deciding what goes in it. The 2 slot bays are EMPTY; fans, psus, res are populated. Enough to power on and reach the box, which is the question most people ask first and the one `default` used to answer with whatever the drawing happened to be populated with.",
+   "kind": "base",
+   "source": "derived - built from the group roles rather than from a vendor bundle: every bay whose group is `service` or `management` keeps its seat, every `traffic` bay takes a blank. This vendor publishes no base configuration for this chassis, so the library defines one. Where a vendor DOES publish one, follow it instead and say so here."
+  },
+  "dc": {
+   "bays": {
+    "psu-0": "juniper/mx304-psu-dc@1",
+    "psu-1": "juniper/mx304-psu-dc@1"
+   },
+   "description": "DC-powered chassis - two 2200 W DC PSUs, dual Routing Engines.",
+   "kind": "orderable"
+  },
+  "dual-re-ac": {
+   "description": "Two Routing Engines, two LMIC16s, AC power - the fully redundant configuration the guide photographs. 3.2 Tbps of installed capacity.",
+   "kind": "example"
+  },
+  "hvac-dc": {
+   "bays": {
+    "psu-0": "juniper/mx304-psu-hvacdc@1",
+    "psu-1": "juniper/mx304-psu-hvacdc@1"
+   },
+   "description": "High-voltage AC/DC universal power - two 2200 W HVAC/DC PSUs, dual Routing Engines.",
+   "kind": "orderable"
+  },
+  "one-re-3lmic-ac": {
+   "bays": {
+    "re1-lmic2": "juniper/mx304-lmic16@1"
+   },
+   "description": "One Routing Engine and three LMIC16s (the third in the RE 1/LMIC2 slot) - the maximum-capacity 4.8 Tbps configuration of guide Figure 3.",
+   "kind": "example"
+  }
+ },
+ "datasheet": {
+  "sha256": "baa90891bcc5cc2e6da896b03d52f6c8e7f4f79d94b286720c2d3708e6b74cfc",
+  "title": "Juniper MX304 datasheet"
+ },
+ "description": "Juniper MX304 Universal Routing Platform - a modular 2RU, 4.8 Tbps Trio 6-based edge router. Four half-width front slots take one or two hot-swappable Routing Engines (slot RE 0, and slot RE 1/LMIC2 which also accepts a third line card) and two or three LMIC16 multi-rate line cards (16x100GbE or 4x400GbE each). The rear carries two stacked 2200 W PSUs (AC, DC, or HVAC/DC), a fixed timing strip (1PPS and 10 MHz SMB in/out, ToD, BITS, and a GM/PTP SFP), three fan modules and the earthing terminal.",
+ "format": 1,
+ "gaps": [
+  {
+   "reason": "needs-drawing",
+   "scope": [
+    "res",
+    "lmics",
+    "psus"
+   ],
+   "wanted": "a mechanical drawing resolving the module envelopes against the drawn apertures - Table 22 states 203.5 mm module and 73.5 mm PSU envelopes while the photographed apertures measure 197.6 and 66.0; the bays and module faces are both drawn at the aperture and the envelopes live in each contract's attrs. That reconciliation is a judgement (rails hidden behind the panel), not a measurement, and this gap is its record.",
+   "what": "module-envelope-vs-aperture"
+  },
+  {
+   "reason": "needs-photo",
+   "scope": [
+    "front"
+   ],
+   "wanted": "geometry for the optional JNP-FLTRDR-2RU cover and JNP-AIRFLTR-2RU filter that bolt over the front face (Table 22 gives envelopes; no straight-on image exists in the intake). Not modelled; the bare front is the photographed configuration.",
+   "what": "front-cover-and-air-filter"
+  },
+  {
+   "reason": "sources-disagree",
+   "scope": [
+    "fans"
+   ],
+   "wanted": "a corrected vendor dimension for the fan module - Table 22's row reads 0.31 x 5.62 x 0.31 in, dimensionally impossible for a module holding two 80 mm fans; the model carries the photographed 82.0 x 85.5 aperture and the table's 143 mm depth.",
+   "what": "fan-module-table-error"
+  },
+  {
+   "reason": "vendor-silent",
+   "wanted": "the 400GbE-configuration chassis power totals (guide Table 26) - the rows fell outside the docling text layer; only the 100GbE Table 25 totals are carried.",
+   "what": "table-26-totals"
+  },
+  {
+   "reason": "vendor-silent",
+   "scope": [
+    "lmics",
+    "timing"
+   ],
+   "wanted": "the MX304 transceiver list - the guide points at the external Hardware Compatibility Tool and no document in the intake carries the table.",
+   "what": "supported-optics"
+  },
+  {
+   "reason": "needs-drawing",
+   "scope": [
+    "res",
+    "lmics"
+   ],
+   "wanted": "the removable front brackets carrying the RE 0 / LMIC0 / RE1/LMIC2 / LMIC1 slot legends, should ears-and-brackets modelling ever be wanted; with ears unmodelled the chassis prints no slot names.",
+   "what": "slot-label-brackets"
+  }
+ ],
+ "groups": {
+  "esd": {
+   "description": "the wrist-strap ESD points, on the front badge strip and the rear right (guide Figure 11, ESD Points)",
+   "index-origin": 0,
+   "role": "furniture",
+   "term": "Point"
+  },
+  "fan-leds": {
+   "description": "Table 12 - bicolour fan lamp on the chassis strip beside each bay; green blinking = hardware init complete, green steady = ok, yellow steady = faulty",
+   "index-origin": 0,
+   "role": "indicator",
+   "states": [
+    "off",
+    {
+     "behavior": "blinking",
+     "color": "#22c55e",
+     "name": "init"
+    },
+    {
+     "color": "#22c55e",
+     "name": "ok"
+    },
+    {
+     "color": "#f59e0b",
+     "name": "fault"
+    }
+   ],
+   "term": "LED"
+  },
+  "fans": {
+   "index-origin": 0,
+   "role": "service",
+   "term": "Fan"
+  },
+  "gm-ptp-leds": {
+   "description": "Table 9 - GM port link lamp; off = no transceiver, green steady = link up, blinking = beacon enabled",
+   "index-origin": 0,
+   "role": "indicator",
+   "states": [
+    "off",
+    {
+     "color": "#22c55e",
+     "name": "link"
+    },
+    {
+     "behavior": "blinking",
+     "color": "#22c55e",
+     "name": "beacon"
+    }
+   ],
+   "term": "LED"
+  },
+  "grounding": {
+   "description": "the rear protective-earthing plate, two M6 screws on 5/8 in. centres (guide Figure 28)",
+   "index-origin": 0,
+   "role": "furniture",
+   "term": "Point"
+  },
+  "lmics": {
+   "description": "LMIC slots 0 and 1; a third LMIC seats in the RE 1/LMIC2 slot (see res)",
+   "index-origin": 0,
+   "role": "traffic",
+   "term": "Slot"
+  },
+  "psus": {
+   "attrs": {
+    "redundancy": "1+1",
+    "redundancy-note": "1+1 - Table 5 Power Redundancy gives AC 1+1 and DC 1+1; the router requires two power modules for 1+1 redundancy"
+   },
+   "index-origin": 0,
+   "role": "service",
+   "term": "PSU"
+  },
+  "res": {
+   "attrs": {
+    "redundancy": "1+1",
+    "redundancy-note": "1+1 - mx304 hardware guide, \"MX304 Component Redundancy\": a redundant system has two field-replaceable Routing Engines, one primary and one backup, the backup taking over if the primary or any part of it fails, with the RE in slot 0 primary by default. The form assumes the second bay holds a Routing Engine; on this chassis that bay can instead take a third LMIC, in which case the router runs on one RE and there is no redundancy to state"
+   },
+   "description": "Routing Engine slots - RE 0, and RE 1/LMIC2 which accepts a Routing Engine or a third LMIC. One RE minimum; slot 0 is primary by default",
+   "index-origin": 0,
+   "role": "service",
+   "term": "Slot"
+  },
+  "timing": {
+   "index-origin": 0,
+   "mixed": "the rear timing strip - 1PPS/10 MHz SMB in-out quad, ToD and BITS RJ45s, and the vertical GM/PTP SFP. One job (clock), three media",
+   "role": "management",
+   "term": "Port"
+  }
+ },
+ "kind": "device",
+ "manufacturer": "Juniper",
+ "maturity": "modelled",
+ "model": "MX304",
+ "name": "mx304",
+ "portfolio": {
+  "family": "Universal Routing Platform",
+  "line": "MX Series"
+ },
+ "profile": "networking",
+ "provenance": {
+  "badge-strip": {
+   "note": "photo - the dark strip right of the module columns (402.9-440.8) carries two columns of three square vent apertures, the JUNIPER / MX 304 badge mid-height, and the front ESD socket at its top with the symbol beside it. Positions are photo-fractions, approximate"
+  },
+  "chassis": {
+   "confidence": "datasheet",
+   "note": "datasheet-table - Table 22: chassis 3.5 x 17.36 x 24.01 in (88.9 x 440.8 x 610 mm), 2RU; 78.2 cm deep over cable-management brackets and handles. The chassis-description prose says 17.63 in (44.8 cm) wide - a 0.7 cm disagreement with Table 22; the table is carried and the prose recorded here. Fully loaded 32 kg, bare 16 kg. Ears are NOT MODELLED by project convention; the modelled body is the 440.8 mm between the flange folds, and the slot labels (RE 0, LMIC0, RE1/LMIC2, LMIC1) are printed on the REMOVABLE BRACKETS the photographs show, so they appear nowhere on this body - recorded so their absence is not read as an omission"
+  },
+  "color": {
+   "note": "photo - medium grey chassis (#8b8f94), bright aluminium module plates, pale blue ejector levers, Juniper orange fan furniture"
+  },
+  "esd": {
+   "note": "guide Figure 11 (ESD Points) - one point on the front badge strip top, one on the rear right above the earthing plate. Both are plain sockets in the photographs"
+  },
+  "fan-strips": {
+   "note": "photo - each fan bay's chassis strip to its right prints the fan icon, the bay number and the bicolour status lamp (Table 12: green blinking = hardware init complete, green steady = ok, yellow steady = faulty). The fourth strip position at the far right shares the ground zone"
+  },
+  "front-cover": {
+   "note": "not modelled - the optional front cover with air filter (JNP-FLTRDR-2RU + JNP-AIRFLTR-2RU, Table 22) bolts over the entire front face; the guide documents replacement procedures for both. Modelled configuration is the bare front as photographed; see gaps"
+  },
+  "ground-stud-pitch": {
+   "confidence": "datasheet",
+   "note": "the guide's \"0.63-in. (16-mm) centers\" is the 5/8 in. pattern, 15.875: 0.63 in. is how two-hole lug tables print 5/8 in. (Panduit LCD6-10A-L, a 5/8 in. lug, is listed at 0.63 hole spacing) and 16 mm is the metric rounding of 15.875. A literal 16.0 would be 0.125 off the pitch of every 5/8 in. lug. @1 drew the holes 16.0 apart; they moved symmetrically about the same centre inside the plate, and the plate, its cutout and the earth symbol did not move (#828)"
+  },
+  "ground-stud-size": {
+   "confidence": "datasheet",
+   "note": "the guide: two threaded holes on the rear side fit M6 pan head screws, and the grounding lug is secured with M6 pan head screws: the `stud-size` of the plate's pair. The guide also calls the terminal \"sized for M6 hex screws\""
+  },
+  "grounding": {
+   "note": "guide grounding specifications + photo - two threaded holes for M6 pan-head screws at the rear right, under the earth symbol; the protective earthing terminal bracket attaches here. Modelled as juniper/mx304-ground-plate@2, which presents `stud-pair-5-8`, so one two-hole lug (generic/two-hole-lug-5-8@1) lands across the pair and the ring lug still lands on either screw, `ground-plate/1` and `/2`; a lug's wire leaves downward"
+  },
+  "lifecycle": {
+   "note": "none-announced - searched \"Juniper MX304 end of life end of sale\" 2026-08-26; the third-party EOL trackers list no dates and the 2022 NANOG thread names the MX304 as the successor replacing the MX204 and MX10003. Absence of the announcement is the finding"
+  },
+  "other-faces": {
+   "note": "near-blank by evidence - no source shows the top, bottom or side faces; each carries only an estimated mounting-rail band so the capability chain counts it as drawn, sized from Table 22. Axis conventions per viewer3d.js: LEFT view x = 0 is the REAR, RIGHT view x = 0 is the FRONT, top and bottom y = 0 at the FRONT"
+  },
+  "power": {
+   "note": "guide Table 25, the vendor's own per-module table at two ambients for the 3.2 Tbps two-RE + two-LMIC 100GbE configuration: REs 49/59 W each, SFB+CB+PMB 155/228 (chassis internals, not a FRU here), LMICs 318/410 each with transceivers, fans 48/90 each; total chassis power 1033 W at 25 C and 1436 W at 46 C. Those totals are carried as the device figures with that scope in power-envelope; Table 26 gives the 400GbE configuration and its totals fell outside this extraction's text layer - not carried rather than guessed"
+  },
+  "rear": {
+   "note": "photo (mx304-rear-ac-high) - stacked PSU bays at x 10.9 (PSU 0 above PSU 1, labels printed vertically on the chassis strip right of them), the fixed timing strip at 84-116, three 82.0 mm fan bays EVENLY spaced at x 116.4, 225.4 and 334.5 (26.9 mm label strips between and after, each printing the bay's number, lamp and fan icon), and the earthing plate and rear ESD socket at the right end. A FIRST READING PUT FAN 1 AT 213.4 AND CALLED THE SPACING ASYMMETRIC - it had mis-assigned fan 1's edges to its grille internals; the DC rear photograph (independent shot, same chassis) and a zoom on the strip between fans 1 and 2 both give the even layout, and the reviewer's instinct that routers do not stagger their fans was what triggered the re-measure. The rear drawing (g101368 family) was measured too but its verticals mix module internals at this threshold and were not used for positions"
+  },
+  "scale": {
+   "note": "photo + drawing, cross-anchored per axis - the guide front drawing (g101366) measures aspect 5.58 against the rack face's 5.43 and is internally inconsistent in x by ~1.5%, and the front photograph is ~16% COMPRESSED in y (near-axis studio shot) while consistent in x. So: front x positions come from the photograph at 4.058 px/mm anchored to the 440.8 body, front y positions from the drawing anchored to the 88.9 height. The rear photograph is near-isotropic (3%) and rear positions come from it at 4.236 px/mm (x) / 4.106 (y). Feature sizes come from the registry and Table 22 throughout"
+  },
+  "slots": {
+   "confidence": "drawing",
+   "note": "drawing + photo - four half-width apertures in two columns of two: RE 0 above LMIC 0 on the left, RE 1/LMIC2 above LMIC 1 on the right (guide Figure 2 callouts name all four). Rows y 4.1-43.8 and 44.6-84.3 off the drawing; columns x 1.2-198.8 and 205.3-402.9 off the photograph, separated by the centre rail. A one-RE system may seat a THIRD LMIC in the RE 1/LMIC2 slot (guide Figure 3 shows it; hardware overview text: \"You can also add a third LMIC into one of the Routing Engine slots\"). The 197.6 mm apertures take 203.5 mm module envelopes - the modules carry insert: for the difference"
+  },
+  "sources": {
+   "note": "MX304 Universal Routing Platform Hardware Guide (figures g101366/ g101368/g101334/g101624 among others), MX304 datasheet (mx304-datasheet.pdf), Juniper image-library studio photographs mx304-front-high, mx304-rear-ac-high and mx304-rear-dc-high, and the NetBox devicetype-library MX304 elevations. No mechanical drawing was available"
+  },
+  "timing": {
+   "note": "photo + guide timing topic - SMB quad at x 98.6/107.1, y 11.6/22.2 (rows 10 MHz above 1PPS, columns OUT left / IN right per the rotated legends), BITS RJ45 centred at 101.9, 35.6, ToD at 101.3, 55.4, and the GM/PTP SFP cage VERTICAL at 100.1, 74.9 with its link lamp to the left. The guide NOTE says BITS and GM/PTP are currently unsupported and reserved for future use - carried in attrs. GM/PTP supports 1-GbE and 10-GbE optics per the same topic"
+  }
+ },
+ "references": [
+  {
+   "sha256": "ae71f56cad6311562f9479b91c5346025e7c957b130ba40d172ae26a9ba75279",
+   "title": "Juniper MX304 Universal Routing Platform Hardware Guide"
+  }
+ ],
+ "version": "4.0.2",
+ "views": {
+  "bottom": {
+   "panel": {
+    "decor": [
+     {
+      "at": [
+       0.0,
+       0.0
+      ],
+      "confidence": "estimated",
+      "fill": "#7d8185",
+      "size": [
+       6.0,
+       610.0
+      ],
+      "source": "lower edge of the side rail; mirrored from the top estimate"
+     },
+     {
+      "at": [
+       434.8,
+       0.0
+      ],
+      "confidence": "estimated",
+      "fill": "#7d8185",
+      "size": [
+       6.0,
+       610.0
+      ],
+      "source": "lower edge of the side rail; same estimate"
+     }
+    ]
+   },
+   "size": {
+    "h": 610.0,
+    "w": 440.8
+   }
+  },
+  "front": {
+   "components": {
+    "bays": [
+     {
+      "accepts": [
+       "juniper/jnp304-re@1",
+       "juniper/jnp304-blnk@1"
+      ],
+      "at": [
+       1.2,
+       4.1
+      ],
+      "default": "juniper/jnp304-re@1",
+      "group": "res",
+      "id": "re0",
+      "rel-pos": 0,
+      "size": {
+       "h": 39.7,
+       "w": 197.6
+      }
+     },
+     {
+      "accepts": [
+       "juniper/jnp304-re@1",
+       "juniper/mx304-lmic16@1",
+       "juniper/jnp304-blnk@1"
+      ],
+      "at": [
+       205.3,
+       4.1
+      ],
+      "default": "juniper/jnp304-re@1",
+      "group": "res",
+      "id": "re1-lmic2",
+      "rel-pos": 1,
+      "size": {
+       "h": 39.7,
+       "w": 197.6
+      }
+     },
+     {
+      "accepts": [
+       "juniper/mx304-lmic16@1",
+       "juniper/jnp304-blnk@1"
+      ],
+      "at": [
+       1.2,
+       44.6
+      ],
+      "default": "juniper/mx304-lmic16@1",
+      "group": "lmics",
+      "id": "lmic0",
+      "rel-pos": 0,
+      "size": {
+       "h": 39.7,
+       "w": 197.6
+      }
+     },
+     {
+      "accepts": [
+       "juniper/mx304-lmic16@1",
+       "juniper/jnp304-blnk@1"
+      ],
+      "at": [
+       205.3,
+       44.6
+      ],
+      "default": "juniper/mx304-lmic16@1",
+      "group": "lmics",
+      "id": "lmic1",
+      "rel-pos": 1,
+      "size": {
+       "h": 39.7,
+       "w": 197.6
+      }
+     }
+    ],
+    "placements": [
+     {
+      "at": [
+       430.9,
+       2.3
+      ],
+      "for": "chassis",
+      "group": "esd",
+      "id": "esd-front-jack",
+      "ref": "common/esd-jack@1",
+      "rel-pos": 0
+     }
+    ]
+   },
+   "panel": {
+    "cutouts": [
+     {
+      "at": [
+       431.8,
+       3.2
+      ],
+      "id": "esd-front",
+      "shape": "circle",
+      "size": [
+       4.2,
+       4.2
+      ]
+     }
+    ],
+    "decor": [
+     {
+      "at": [
+       406.5,
+       5.0
+      ],
+      "pattern": "vent",
+      "rx": 1.0,
+      "size": [
+       8.0,
+       8.0
+      ],
+      "vent": 6.0
+     },
+     {
+      "at": [
+       416.5,
+       5.0
+      ],
+      "pattern": "vent",
+      "rx": 1.0,
+      "size": [
+       8.0,
+       8.0
+      ],
+      "vent": 6.0
+     },
+     {
+      "at": [
+       406.5,
+       15.5
+      ],
+      "pattern": "vent",
+      "rx": 1.0,
+      "size": [
+       8.0,
+       8.0
+      ],
+      "vent": 6.0
+     },
+     {
+      "at": [
+       416.5,
+       15.5
+      ],
+      "pattern": "vent",
+      "rx": 1.0,
+      "size": [
+       8.0,
+       8.0
+      ],
+      "vent": 6.0
+     },
+     {
+      "at": [
+       406.5,
+       26.0
+      ],
+      "pattern": "vent",
+      "rx": 1.0,
+      "size": [
+       8.0,
+       8.0
+      ],
+      "vent": 6.0
+     },
+     {
+      "at": [
+       416.5,
+       26.0
+      ],
+      "pattern": "vent",
+      "rx": 1.0,
+      "size": [
+       8.0,
+       8.0
+      ],
+      "vent": 6.0
+     },
+     {
+      "at": [
+       198.8,
+       0.0
+      ],
+      "fill": "#82868b",
+      "rx": 0.0,
+      "size": [
+       6.5,
+       88.9
+      ]
+     },
+     {
+      "at": [
+       402.9,
+       0.0
+      ],
+      "fill": "#3a3d42",
+      "rx": 0.0,
+      "size": [
+       37.9,
+       88.9
+      ]
+     }
+    ]
+   },
+   "silkscreen": [
+    {
+     "at": [
+      427.5,
+      8.2
+     ],
+     "fill": "#c7ccd1",
+     "for": "chassis",
+     "path": "M -1.4 1.2 L 0 -1.2 L 1.4 1.2 Z M -2.1 2.2 L -0.9 2.2 M 0.9 2.2 L 2.1 2.2"
+    },
+    {
+     "anchor": "middle",
+     "at": [
+      421.8,
+      39.5
+     ],
+     "fill": "#e8eaec",
+     "font-size": 3.4,
+     "for": "chassis",
+     "text": "JUNIPER"
+    },
+    {
+     "anchor": "middle",
+     "at": [
+      421.8,
+      41.9
+     ],
+     "fill": "#b9bdc2",
+     "font-size": 1.3,
+     "for": "chassis",
+     "text": "NETWORKS"
+    },
+    {
+     "anchor": "middle",
+     "at": [
+      421.8,
+      46.7
+     ],
+     "fill": "#e8eaec",
+     "font-size": 3.2,
+     "for": "chassis",
+     "text": "MX 304"
+    }
+   ],
+   "size": {
+    "h": 88.9,
+    "w": 440.8
+   }
+  },
+  "left": {
+   "panel": {
+    "decor": [
+     {
+      "at": [
+       0.0,
+       39.0
+      ],
+      "confidence": "estimated",
+      "fill": "#7d8185",
+      "size": [
+       610.0,
+       11.0
+      ],
+      "source": "mounting-rail band along the side (the guide's rack topics show pre-installed brackets); full-length band, height and position estimated - no side drawing exists"
+     }
+    ]
+   },
+   "size": {
+    "h": 88.9,
+    "w": 610.0
+   }
+  },
+  "rear": {
+   "components": {
+    "bays": [
+     {
+      "accepts": [
+       "juniper/mx304-psu-ac@1",
+       "juniper/mx304-psu-dc@1",
+       "juniper/mx304-psu-hvacdc@1"
+      ],
+      "at": [
+       10.9,
+       2.4
+      ],
+      "default": "juniper/mx304-psu-ac@1",
+      "group": "psus",
+      "id": "psu-0",
+      "rel-pos": 0,
+      "size": {
+       "h": 40.1,
+       "w": 66.0
+      }
+     },
+     {
+      "accepts": [
+       "juniper/mx304-psu-ac@1",
+       "juniper/mx304-psu-dc@1",
+       "juniper/mx304-psu-hvacdc@1"
+      ],
+      "at": [
+       10.9,
+       44.4
+      ],
+      "default": "juniper/mx304-psu-ac@1",
+      "group": "psus",
+      "id": "psu-1",
+      "rel-pos": 1,
+      "size": {
+       "h": 40.1,
+       "w": 66.0
+      }
+     },
+     {
+      "accepts": [
+       "juniper/mx304-fan@1"
+      ],
+      "at": [
+       116.4,
+       1.5
+      ],
+      "default": "juniper/mx304-fan@1",
+      "group": "fans",
+      "id": "fan-0",
+      "rel-pos": 0,
+      "size": {
+       "h": 85.5,
+       "w": 82.0
+      }
+     },
+     {
+      "accepts": [
+       "juniper/mx304-fan@1"
+      ],
+      "at": [
+       225.4,
+       1.5
+      ],
+      "default": "juniper/mx304-fan@1",
+      "group": "fans",
+      "id": "fan-1",
+      "rel-pos": 1,
+      "size": {
+       "h": 85.5,
+       "w": 82.0
+      }
+     },
+     {
+      "accepts": [
+       "juniper/mx304-fan@1"
+      ],
+      "at": [
+       334.2,
+       1.5
+      ],
+      "default": "juniper/mx304-fan@1",
+      "group": "fans",
+      "id": "fan-2",
+      "rel-pos": 2,
+      "size": {
+       "h": 85.5,
+       "w": 82.0
+      }
+     }
+    ],
+    "placements": [
+     {
+      "at": [
+       429.1,
+       7.7
+      ],
+      "for": "chassis",
+      "group": "esd",
+      "id": "esd-rear-jack",
+      "ref": "common/esd-jack@1",
+      "rel-pos": 1
+     },
+     {
+      "at": [
+       96.19,
+       9.19
+      ],
+      "attrs": {
+       "function": "10 MHz clock output"
+      },
+      "group": "timing",
+      "id": "clk-10mhz-out",
+      "ref": "std/smb@1",
+      "rel-pos": 0
+     },
+     {
+      "at": [
+       104.69,
+       9.19
+      ],
+      "attrs": {
+       "function": "10 MHz clock input"
+      },
+      "group": "timing",
+      "id": "clk-10mhz-in",
+      "ref": "std/smb@1",
+      "rel-pos": 1
+     },
+     {
+      "at": [
+       96.19,
+       19.79
+      ],
+      "attrs": {
+       "function": "1PPS output"
+      },
+      "group": "timing",
+      "id": "clk-1pps-out",
+      "ref": "std/smb@1",
+      "rel-pos": 2
+     },
+     {
+      "at": [
+       104.69,
+       19.79
+      ],
+      "attrs": {
+       "function": "1PPS input"
+      },
+      "group": "timing",
+      "id": "clk-1pps-in",
+      "ref": "std/smb@1",
+      "rel-pos": 3
+     },
+     {
+      "at": [
+       94,
+       29
+      ],
+      "attrs": {
+       "function": "BITS (reserved for future use per the guide)",
+       "media": "rj48"
+      },
+      "group": "timing",
+      "id": "bits",
+      "ref": "std/rj45@2",
+      "rel-pos": 4
+     },
+     {
+      "at": [
+       93.4,
+       48.8
+      ],
+      "attrs": {
+       "function": "Time of day",
+       "media": "rj45-tod"
+      },
+      "group": "timing",
+      "id": "tod",
+      "ref": "std/rj45@2",
+      "rel-pos": 5
+     },
+     {
+      "at": [
+       92.85,
+       69.9
+      ],
+      "attrs": {
+       "function": "PTP grandmaster clock port",
+       "media": "sfp-plus",
+       "speed": "10g"
+      },
+      "description": "takes 1-GbE and 10-GbE optics per the guide, so its speed is the higher of the two; the same guide says this port is reserved for future use and currently unsupported",
+      "group": "timing",
+      "id": "gm-ptp",
+      "ref": "std/sfp@1",
+      "rel-pos": 6,
+      "rotate": 90
+     },
+     {
+      "at": [
+       92.6,
+       71.8
+      ],
+      "for": "gm-ptp",
+      "group": "gm-ptp-leds",
+      "id": "led-gm-ptp",
+      "ref": "common/led-dot@1",
+      "rel-pos": 0
+     },
+     {
+      "at": [
+       201.6,
+       77.6
+      ],
+      "for": "fan-0",
+      "group": "fan-leds",
+      "id": "led-fan-0",
+      "ref": "common/led-dot@1",
+      "rel-pos": 0
+     },
+     {
+      "at": [
+       310.7,
+       77.6
+      ],
+      "for": "fan-1",
+      "group": "fan-leds",
+      "id": "led-fan-1",
+      "ref": "common/led-dot@1",
+      "rel-pos": 1
+     },
+     {
+      "at": [
+       419.3,
+       77.6
+      ],
+      "for": "fan-2",
+      "group": "fan-leds",
+      "id": "led-fan-2",
+      "ref": "common/led-dot@1",
+      "rel-pos": 2
+     },
+     {
+      "at": [
+       422.4,
+       24.5
+      ],
+      "attrs": {
+       "stud-size": "M6"
+      },
+      "group": "grounding",
+      "id": "ground-plate",
+      "ref": "juniper/mx304-ground-plate@2",
+      "rel-pos": 0
+     }
+    ]
+   },
+   "panel": {
+    "cutouts": [
+     {
+      "at": [
+       96.19,
+       9.19
+      ],
+      "id": "clk-10mhz-out",
+      "shape": "circle",
+      "size": [
+       4.83,
+       4.83
+      ]
+     },
+     {
+      "at": [
+       104.69,
+       9.19
+      ],
+      "id": "clk-10mhz-in",
+      "shape": "circle",
+      "size": [
+       4.83,
+       4.83
+      ]
+     },
+     {
+      "at": [
+       96.19,
+       19.79
+      ],
+      "id": "clk-1pps-out",
+      "shape": "circle",
+      "size": [
+       4.83,
+       4.83
+      ]
+     },
+     {
+      "at": [
+       104.69,
+       19.79
+      ],
+      "id": "clk-1pps-in",
+      "shape": "circle",
+      "size": [
+       4.83,
+       4.83
+      ]
+     },
+     {
+      "at": [
+       94,
+       29
+      ],
+      "id": "bits",
+      "size": [
+       15.8,
+       13.2
+      ]
+     },
+     {
+      "at": [
+       93.4,
+       48.8
+      ],
+      "id": "tod",
+      "size": [
+       15.8,
+       13.2
+      ]
+     },
+     {
+      "at": [
+       95.1,
+       67.65
+      ],
+      "id": "gm-ptp",
+      "size": [
+       10.0,
+       14.5
+      ]
+     },
+     {
+      "at": [
+       92.6,
+       71.8
+      ],
+      "id": "led-gm-ptp",
+      "shape": "circle",
+      "size": [
+       2.0,
+       2.0
+      ]
+     },
+     {
+      "at": [
+       201.6,
+       77.6
+      ],
+      "id": "led-fan-0",
+      "shape": "circle",
+      "size": [
+       2.0,
+       2.0
+      ]
+     },
+     {
+      "at": [
+       310.7,
+       77.6
+      ],
+      "id": "led-fan-1",
+      "shape": "circle",
+      "size": [
+       2.0,
+       2.0
+      ]
+     },
+     {
+      "at": [
+       419.3,
+       77.6
+      ],
+      "id": "led-fan-2",
+      "shape": "circle",
+      "size": [
+       2.0,
+       2.0
+      ]
+     },
+     {
+      "at": [
+       430.0,
+       8.6
+      ],
+      "id": "esd-rear",
+      "shape": "circle",
+      "size": [
+       4.2,
+       4.2
+      ]
+     }
+    ],
+    "decor": [
+     {
+      "at": [
+       77.4,
+       0.0
+      ],
+      "fill": "#82868b",
+      "rx": 0.0,
+      "size": [
+       6.8,
+       88.9
+      ]
+     }
+    ]
+   },
+   "silkscreen": [
+    {
+     "anchor": "middle",
+     "at": [
+      80.9,
+      21.5
+     ],
+     "font-size": 2.0,
+     "for": "psu-0",
+     "rotate": 270,
+     "text": "PSU 0"
+    },
+    {
+     "anchor": "middle",
+     "at": [
+      80.9,
+      63.0
+     ],
+     "font-size": 2.0,
+     "for": "psu-1",
+     "rotate": 270,
+     "text": "PSU 1"
+    },
+    {
+     "anchor": "middle",
+     "at": [
+      93.4,
+      11.6
+     ],
+     "font-size": 1.7,
+     "for": [
+      "clk-10mhz-out",
+      "clk-10mhz-in"
+     ],
+     "rotate": 270,
+     "text": "10Mhz"
+    },
+    {
+     "anchor": "middle",
+     "at": [
+      93.4,
+      22.2
+     ],
+     "font-size": 1.7,
+     "for": [
+      "clk-1pps-out",
+      "clk-1pps-in"
+     ],
+     "rotate": 270,
+     "text": "1PPS"
+    },
+    {
+     "anchor": "middle",
+     "at": [
+      101.6,
+      16.9
+     ],
+     "font-size": 1.5,
+     "for": [
+      "clk-10mhz-out",
+      "clk-1pps-out"
+     ],
+     "rotate": 270,
+     "text": "OUT"
+    },
+    {
+     "anchor": "middle",
+     "at": [
+      110.6,
+      16.9
+     ],
+     "font-size": 1.5,
+     "for": [
+      "clk-10mhz-in",
+      "clk-1pps-in"
+     ],
+     "rotate": 270,
+     "text": "IN"
+    },
+    {
+     "anchor": "middle",
+     "at": [
+      91.4,
+      35.6
+     ],
+     "font-size": 1.7,
+     "for": "bits",
+     "rotate": 270,
+     "text": "BITS"
+    },
+    {
+     "anchor": "middle",
+     "at": [
+      91.4,
+      55.4
+     ],
+     "font-size": 1.7,
+     "for": "tod",
+     "rotate": 270,
+     "text": "ToD"
+    },
+    {
+     "anchor": "middle",
+     "at": [
+      111.8,
+      74.9
+     ],
+     "font-size": 1.7,
+     "for": "gm-ptp",
+     "rotate": 270,
+     "text": "GM/PTP"
+    },
+    {
+     "anchor": "middle",
+     "at": [
+      208.3,
+      76.6
+     ],
+     "font-size": 2.4,
+     "for": "fan-0",
+     "text": "0"
+    },
+    {
+     "at": [
+      211.8,
+      82.2
+     ],
+     "for": "fan-0",
+     "path": "M 0 -1.1 A 1.1 1.1 0 1 0 0.01 -1.1 Z M -1.9 -1.1 A 1.1 1.1 0 1 0 -1.89 -1.1 Z M 1.9 -1.1 A 1.1 1.1 0 1 0 1.91 -1.1 Z M -0.95 0.8 A 1.1 1.1 0 1 0 -0.94 0.8 Z M 0.95 0.8 A 1.1 1.1 0 1 0 0.96 0.8 Z"
+    },
+    {
+     "anchor": "middle",
+     "at": [
+      317.4,
+      76.6
+     ],
+     "font-size": 2.4,
+     "for": "fan-1",
+     "text": "1"
+    },
+    {
+     "at": [
+      320.9,
+      82.2
+     ],
+     "for": "fan-1",
+     "path": "M 0 -1.1 A 1.1 1.1 0 1 0 0.01 -1.1 Z M -1.9 -1.1 A 1.1 1.1 0 1 0 -1.89 -1.1 Z M 1.9 -1.1 A 1.1 1.1 0 1 0 1.91 -1.1 Z M -0.95 0.8 A 1.1 1.1 0 1 0 -0.94 0.8 Z M 0.95 0.8 A 1.1 1.1 0 1 0 0.96 0.8 Z"
+    },
+    {
+     "anchor": "middle",
+     "at": [
+      426.0,
+      76.6
+     ],
+     "font-size": 2.4,
+     "for": "fan-2",
+     "text": "2"
+    },
+    {
+     "at": [
+      429.5,
+      82.2
+     ],
+     "for": "fan-2",
+     "path": "M 0 -1.1 A 1.1 1.1 0 1 0 0.01 -1.1 Z M -1.9 -1.1 A 1.1 1.1 0 1 0 -1.89 -1.1 Z M 1.9 -1.1 A 1.1 1.1 0 1 0 1.91 -1.1 Z M -0.95 0.8 A 1.1 1.1 0 1 0 -0.94 0.8 Z M 0.95 0.8 A 1.1 1.1 0 1 0 0.96 0.8 Z"
+    },
+    {
+     "at": [
+      427.3,
+      66.5
+     ],
+     "fill": "#c7ccd1",
+     "for": "ground-plate",
+     "path": "M 0 -4.2 A 4.2 4.2 0 1 0 0.01 -4.2 Z M -2.4 -1.1 H 2.4 M -1.6 0.5 H 1.6 M -0.7 2.1 H 0.7"
+    },
+    {
+     "at": [
+      423.3,
+      11.2
+     ],
+     "fill": "#c7ccd1",
+     "for": "chassis",
+     "path": "M -1.4 1.2 L 0 -1.2 L 1.4 1.2 Z M -2.1 2.2 L -0.9 2.2 M 0.9 2.2 L 2.1 2.2"
+    }
+   ],
+   "size": {
+    "h": 88.9,
+    "w": 440.8
+   }
+  },
+  "right": {
+   "panel": {
+    "decor": [
+     {
+      "at": [
+       0.0,
+       39.0
+      ],
+      "confidence": "estimated",
+      "fill": "#7d8185",
+      "size": [
+       610.0,
+       11.0
+      ],
+      "source": "mounting-rail band along the side; mirror of the left face band, same estimate"
+     }
+    ]
+   },
+   "size": {
+    "h": 88.9,
+    "w": 610.0
+   }
+  },
+  "top": {
+   "panel": {
+    "decor": [
+     {
+      "at": [
+       0.0,
+       0.0
+      ],
+      "confidence": "estimated",
+      "fill": "#7d8185",
+      "size": [
+       6.0,
+       610.0
+      ],
+      "source": "side rail edge seen from above; width estimated"
+     },
+     {
+      "at": [
+       434.8,
+       0.0
+      ],
+      "confidence": "estimated",
+      "fill": "#7d8185",
+      "size": [
+       6.0,
+       610.0
+      ],
+      "source": "side rail edge seen from above; width estimated"
+     }
+    ]
+   },
+   "size": {
+    "h": 610.0,
+    "w": 440.8
+   }
+  }
+ }
+}