@pompadour/react-native-skia 1.0.0

package/cpp/skia/include/core/SkPath.h

@@ -0,0 +1,1909 @@
+/*
+ * Copyright 2006 The Android Open Source Project
+ *
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ */
+
+#ifndef SkPath_DEFINED
+#define SkPath_DEFINED
+
+#include "include/core/SkMatrix.h"
+#include "include/core/SkPathTypes.h"
+#include "include/core/SkPoint.h"
+#include "include/core/SkRect.h"
+#include "include/core/SkRefCnt.h"
+#include "include/core/SkScalar.h"
+#include "include/core/SkTypes.h"
+#include "include/private/base/SkDebug.h"
+#include "include/private/base/SkTo.h"
+#include "include/private/base/SkTypeTraits.h"
+
+#include <atomic>
+#include <cstddef>
+#include <cstdint>
+#include <initializer_list>
+#include <tuple>
+#include <type_traits>
+
+class SkData;
+class SkPathRef;
+class SkRRect;
+class SkWStream;
+enum class SkPathConvexity;
+enum class SkPathFirstDirection;
+struct SkPathVerbAnalysis;
+
+// WIP -- define this locally, and fix call-sites to use SkPathBuilder (skbug.com/9000)
+//#define SK_HIDE_PATH_EDIT_METHODS
+
+/** \class SkPath
+    SkPath contain geometry. SkPath may be empty, or contain one or more verbs that
+    outline a figure. SkPath always starts with a move verb to a Cartesian coordinate,
+    and may be followed by additional verbs that add lines or curves.
+    Adding a close verb makes the geometry into a continuous loop, a closed contour.
+    SkPath may contain any number of contours, each beginning with a move verb.
+
+    SkPath contours may contain only a move verb, or may also contain lines,
+    quadratic beziers, conics, and cubic beziers. SkPath contours may be open or
+    closed.
+
+    When used to draw a filled area, SkPath describes whether the fill is inside or
+    outside the geometry. SkPath also describes the winding rule used to fill
+    overlapping contours.
+
+    Internally, SkPath lazily computes metrics likes bounds and convexity. Call
+    SkPath::updateBoundsCache to make SkPath thread safe.
+*/
+class SK_API SkPath {
+public:
+    /**
+     *  Create a new path with the specified segments.
+     *
+     *  The points and weights arrays are read in order, based on the sequence of verbs.
+     *
+     *  Move    1 point
+     *  Line    1 point
+     *  Quad    2 points
+     *  Conic   2 points and 1 weight
+     *  Cubic   3 points
+     *  Close   0 points
+     *
+     *  If an illegal sequence of verbs is encountered, or the specified number of points
+     *  or weights is not sufficient given the verbs, an empty Path is returned.
+     *
+     *  A legal sequence of verbs consists of any number of Contours. A contour always begins
+     *  with a Move verb, followed by 0 or more segments: Line, Quad, Conic, Cubic, followed
+     *  by an optional Close.
+     */
+    static SkPath Make(const SkPoint[],  int pointCount,
+                       const uint8_t[],  int verbCount,
+                       const SkScalar[], int conicWeightCount,
+                       SkPathFillType, bool isVolatile = false);
+
+    static SkPath Rect(const SkRect&, SkPathDirection = SkPathDirection::kCW,
+                       unsigned startIndex = 0);
+    static SkPath Oval(const SkRect&, SkPathDirection = SkPathDirection::kCW);
+    static SkPath Oval(const SkRect&, SkPathDirection, unsigned startIndex);
+    static SkPath Circle(SkScalar center_x, SkScalar center_y, SkScalar radius,
+                         SkPathDirection dir = SkPathDirection::kCW);
+    static SkPath RRect(const SkRRect&, SkPathDirection dir = SkPathDirection::kCW);
+    static SkPath RRect(const SkRRect&, SkPathDirection, unsigned startIndex);
+    static SkPath RRect(const SkRect& bounds, SkScalar rx, SkScalar ry,
+                        SkPathDirection dir = SkPathDirection::kCW);
+
+    static SkPath Polygon(const SkPoint pts[], int count, bool isClosed,
+                          SkPathFillType = SkPathFillType::kWinding,
+                          bool isVolatile = false);
+
+    static SkPath Polygon(const std::initializer_list<SkPoint>& list, bool isClosed,
+                          SkPathFillType fillType = SkPathFillType::kWinding,
+                          bool isVolatile = false) {
+        return Polygon(list.begin(), SkToInt(list.size()), isClosed, fillType, isVolatile);
+    }
+
+    static SkPath Line(const SkPoint a, const SkPoint b) {
+        return Polygon({a, b}, false);
+    }
+
+    /** Constructs an empty SkPath. By default, SkPath has no verbs, no SkPoint, and no weights.
+        FillType is set to kWinding.
+
+        @return  empty SkPath
+
+        example: https://fiddle.skia.org/c/@Path_empty_constructor
+    */
+    SkPath();
+
+    /** Constructs a copy of an existing path.
+        Copy constructor makes two paths identical by value. Internally, path and
+        the returned result share pointer values. The underlying verb array, SkPoint array
+        and weights are copied when modified.
+
+        Creating a SkPath copy is very efficient and never allocates memory.
+        SkPath are always copied by value from the interface; the underlying shared
+        pointers are not exposed.
+
+        @param path  SkPath to copy by value
+        @return      copy of SkPath
+
+        example: https://fiddle.skia.org/c/@Path_copy_const_SkPath
+    */
+    SkPath(const SkPath& path);
+
+    /** Releases ownership of any shared data and deletes data if SkPath is sole owner.
+
+        example: https://fiddle.skia.org/c/@Path_destructor
+    */
+    ~SkPath();
+
+    /** Constructs a copy of an existing path.
+        SkPath assignment makes two paths identical by value. Internally, assignment
+        shares pointer values. The underlying verb array, SkPoint array and weights
+        are copied when modified.
+
+        Copying SkPath by assignment is very efficient and never allocates memory.
+        SkPath are always copied by value from the interface; the underlying shared
+        pointers are not exposed.
+
+        @param path  verb array, SkPoint array, weights, and SkPath::FillType to copy
+        @return      SkPath copied by value
+
+        example: https://fiddle.skia.org/c/@Path_copy_operator
+    */
+    SkPath& operator=(const SkPath& path);
+
+    /** Compares a and b; returns true if SkPath::FillType, verb array, SkPoint array, and weights
+        are equivalent.
+
+        @param a  SkPath to compare
+        @param b  SkPath to compare
+        @return   true if SkPath pair are equivalent
+    */
+    friend SK_API bool operator==(const SkPath& a, const SkPath& b);
+
+    /** Compares a and b; returns true if SkPath::FillType, verb array, SkPoint array, and weights
+        are not equivalent.
+
+        @param a  SkPath to compare
+        @param b  SkPath to compare
+        @return   true if SkPath pair are not equivalent
+    */
+    friend bool operator!=(const SkPath& a, const SkPath& b) {
+        return !(a == b);
+    }
+
+    /** Returns true if SkPath contain equal verbs and equal weights.
+        If SkPath contain one or more conics, the weights must match.
+
+        conicTo() may add different verbs depending on conic weight, so it is not
+        trivial to interpolate a pair of SkPath containing conics with different
+        conic weight values.
+
+        @param compare  SkPath to compare
+        @return         true if SkPath verb array and weights are equivalent
+
+        example: https://fiddle.skia.org/c/@Path_isInterpolatable
+    */
+    bool isInterpolatable(const SkPath& compare) const;
+
+    /** Interpolates between SkPath with SkPoint array of equal size.
+        Copy verb array and weights to out, and set out SkPoint array to a weighted
+        average of this SkPoint array and ending SkPoint array, using the formula:
+        (Path Point * weight) + ending Point * (1 - weight).
+
+        weight is most useful when between zero (ending SkPoint array) and
+        one (this Point_Array); will work with values outside of this
+        range.
+
+        interpolate() returns false and leaves out unchanged if SkPoint array is not
+        the same size as ending SkPoint array. Call isInterpolatable() to check SkPath
+        compatibility prior to calling interpolate().
+
+        @param ending  SkPoint array averaged with this SkPoint array
+        @param weight  contribution of this SkPoint array, and
+                       one minus contribution of ending SkPoint array
+        @param out     SkPath replaced by interpolated averages
+        @return        true if SkPath contain same number of SkPoint
+
+        example: https://fiddle.skia.org/c/@Path_interpolate
+    */
+    bool interpolate(const SkPath& ending, SkScalar weight, SkPath* out) const;
+
+    /** Returns SkPathFillType, the rule used to fill SkPath.
+
+        @return  current SkPathFillType setting
+    */
+    SkPathFillType getFillType() const { return (SkPathFillType)fFillType; }
+
+    /** Sets FillType, the rule used to fill SkPath. While there is no check
+        that ft is legal, values outside of FillType are not supported.
+    */
+    void setFillType(SkPathFillType ft) {
+        fFillType = SkToU8(ft);
+    }
+
+    /** Returns if FillType describes area outside SkPath geometry. The inverse fill area
+        extends indefinitely.
+
+        @return  true if FillType is kInverseWinding or kInverseEvenOdd
+    */
+    bool isInverseFillType() const { return SkPathFillType_IsInverse(this->getFillType()); }
+
+    /** Replaces FillType with its inverse. The inverse of FillType describes the area
+        unmodified by the original FillType.
+    */
+    void toggleInverseFillType() {
+        fFillType ^= 2;
+    }
+
+    /** Returns true if the path is convex. If necessary, it will first compute the convexity.
+     */
+    bool isConvex() const;
+
+    /** Returns true if this path is recognized as an oval or circle.
+
+        bounds receives bounds of oval.
+
+        bounds is unmodified if oval is not found.
+
+        @param bounds  storage for bounding SkRect of oval; may be nullptr
+        @return        true if SkPath is recognized as an oval or circle
+
+        example: https://fiddle.skia.org/c/@Path_isOval
+    */
+    bool isOval(SkRect* bounds) const;
+
+    /** Returns true if path is representable as SkRRect.
+        Returns false if path is representable as oval, circle, or SkRect.
+
+        rrect receives bounds of SkRRect.
+
+        rrect is unmodified if SkRRect is not found.
+
+        @param rrect  storage for bounding SkRect of SkRRect; may be nullptr
+        @return       true if SkPath contains only SkRRect
+
+        example: https://fiddle.skia.org/c/@Path_isRRect
+    */
+    bool isRRect(SkRRect* rrect) const;
+
+    /** Sets SkPath to its initial state.
+        Removes verb array, SkPoint array, and weights, and sets FillType to kWinding.
+        Internal storage associated with SkPath is released.
+
+        @return  reference to SkPath
+
+        example: https://fiddle.skia.org/c/@Path_reset
+    */
+    SkPath& reset();
+
+    /** Sets SkPath to its initial state, preserving internal storage.
+        Removes verb array, SkPoint array, and weights, and sets FillType to kWinding.
+        Internal storage associated with SkPath is retained.
+
+        Use rewind() instead of reset() if SkPath storage will be reused and performance
+        is critical.
+
+        @return  reference to SkPath
+
+        example: https://fiddle.skia.org/c/@Path_rewind
+    */
+    SkPath& rewind();
+
+    /** Returns if SkPath is empty.
+        Empty SkPath may have FillType but has no SkPoint, SkPath::Verb, or conic weight.
+        SkPath() constructs empty SkPath; reset() and rewind() make SkPath empty.
+
+        @return  true if the path contains no SkPath::Verb array
+    */
+    bool isEmpty() const;
+
+    /** Returns if contour is closed.
+        Contour is closed if SkPath SkPath::Verb array was last modified by close(). When stroked,
+        closed contour draws SkPaint::Join instead of SkPaint::Cap at first and last SkPoint.
+
+        @return  true if the last contour ends with a kClose_Verb
+
+        example: https://fiddle.skia.org/c/@Path_isLastContourClosed
+    */
+    bool isLastContourClosed() const;
+
+    /** Returns true for finite SkPoint array values between negative SK_ScalarMax and
+        positive SK_ScalarMax. Returns false for any SkPoint array value of
+        SK_ScalarInfinity, SK_ScalarNegativeInfinity, or SK_ScalarNaN.
+
+        @return  true if all SkPoint values are finite
+    */
+    bool isFinite() const;
+
+    /** Returns true if the path is volatile; it will not be altered or discarded
+        by the caller after it is drawn. SkPath by default have volatile set false, allowing
+        SkSurface to attach a cache of data which speeds repeated drawing. If true, SkSurface
+        may not speed repeated drawing.
+
+        @return  true if caller will alter SkPath after drawing
+    */
+    bool isVolatile() const {
+        return SkToBool(fIsVolatile);
+    }
+
+    /** Specifies whether SkPath is volatile; whether it will be altered or discarded
+        by the caller after it is drawn. SkPath by default have volatile set false, allowing
+        Skia to attach a cache of data which speeds repeated drawing.
+
+        Mark temporary paths, discarded or modified after use, as volatile
+        to inform Skia that the path need not be cached.
+
+        Mark animating SkPath volatile to improve performance.
+        Mark unchanging SkPath non-volatile to improve repeated rendering.
+
+        raster surface SkPath draws are affected by volatile for some shadows.
+        GPU surface SkPath draws are affected by volatile for some shadows and concave geometries.
+
+        @param isVolatile  true if caller will alter SkPath after drawing
+        @return            reference to SkPath
+    */
+    SkPath& setIsVolatile(bool isVolatile) {
+        fIsVolatile = isVolatile;
+        return *this;
+    }
+
+    /** Tests if line between SkPoint pair is degenerate.
+        Line with no length or that moves a very short distance is degenerate; it is
+        treated as a point.
+
+        exact changes the equality test. If true, returns true only if p1 equals p2.
+        If false, returns true if p1 equals or nearly equals p2.
+
+        @param p1     line start point
+        @param p2     line end point
+        @param exact  if false, allow nearly equals
+        @return       true if line is degenerate; its length is effectively zero
+
+        example: https://fiddle.skia.org/c/@Path_IsLineDegenerate
+    */
+    static bool IsLineDegenerate(const SkPoint& p1, const SkPoint& p2, bool exact);
+
+    /** Tests if quad is degenerate.
+        Quad with no length or that moves a very short distance is degenerate; it is
+        treated as a point.
+
+        @param p1     quad start point
+        @param p2     quad control point
+        @param p3     quad end point
+        @param exact  if true, returns true only if p1, p2, and p3 are equal;
+                      if false, returns true if p1, p2, and p3 are equal or nearly equal
+        @return       true if quad is degenerate; its length is effectively zero
+    */
+    static bool IsQuadDegenerate(const SkPoint& p1, const SkPoint& p2,
+                                 const SkPoint& p3, bool exact);
+
+    /** Tests if cubic is degenerate.
+        Cubic with no length or that moves a very short distance is degenerate; it is
+        treated as a point.
+
+        @param p1     cubic start point
+        @param p2     cubic control point 1
+        @param p3     cubic control point 2
+        @param p4     cubic end point
+        @param exact  if true, returns true only if p1, p2, p3, and p4 are equal;
+                      if false, returns true if p1, p2, p3, and p4 are equal or nearly equal
+        @return       true if cubic is degenerate; its length is effectively zero
+    */
+    static bool IsCubicDegenerate(const SkPoint& p1, const SkPoint& p2,
+                                  const SkPoint& p3, const SkPoint& p4, bool exact);
+
+    /** Returns true if SkPath contains only one line;
+        SkPath::Verb array has two entries: kMove_Verb, kLine_Verb.
+        If SkPath contains one line and line is not nullptr, line is set to
+        line start point and line end point.
+        Returns false if SkPath is not one line; line is unaltered.
+
+        @param line  storage for line. May be nullptr
+        @return      true if SkPath contains exactly one line
+
+        example: https://fiddle.skia.org/c/@Path_isLine
+    */
+    bool isLine(SkPoint line[2]) const;
+
+    /** Returns the number of points in SkPath.
+        SkPoint count is initially zero.
+
+        @return  SkPath SkPoint array length
+
+        example: https://fiddle.skia.org/c/@Path_countPoints
+    */
+    int countPoints() const;
+
+    /** Returns SkPoint at index in SkPoint array. Valid range for index is
+        0 to countPoints() - 1.
+        Returns (0, 0) if index is out of range.
+
+        @param index  SkPoint array element selector
+        @return       SkPoint array value or (0, 0)
+
+        example: https://fiddle.skia.org/c/@Path_getPoint
+    */
+    SkPoint getPoint(int index) const;
+
+    /** Returns number of points in SkPath. Up to max points are copied.
+        points may be nullptr; then, max must be zero.
+        If max is greater than number of points, excess points storage is unaltered.
+
+        @param points  storage for SkPath SkPoint array. May be nullptr
+        @param max     maximum to copy; must be greater than or equal to zero
+        @return        SkPath SkPoint array length
+
+        example: https://fiddle.skia.org/c/@Path_getPoints
+    */
+    int getPoints(SkPoint points[], int max) const;
+
+    /** Returns the number of verbs: kMove_Verb, kLine_Verb, kQuad_Verb, kConic_Verb,
+        kCubic_Verb, and kClose_Verb; added to SkPath.
+
+        @return  length of verb array
+
+        example: https://fiddle.skia.org/c/@Path_countVerbs
+    */
+    int countVerbs() const;
+
+    /** Returns the number of verbs in the path. Up to max verbs are copied. The
+        verbs are copied as one byte per verb.
+
+        @param verbs  storage for verbs, may be nullptr
+        @param max    maximum number to copy into verbs
+        @return       the actual number of verbs in the path
+
+        example: https://fiddle.skia.org/c/@Path_getVerbs
+    */
+    int getVerbs(uint8_t verbs[], int max) const;
+
+    /** Returns the approximate byte size of the SkPath in memory.
+
+        @return  approximate size
+    */
+    size_t approximateBytesUsed() const;
+
+    /** Exchanges the verb array, SkPoint array, weights, and SkPath::FillType with other.
+        Cached state is also exchanged. swap() internally exchanges pointers, so
+        it is lightweight and does not allocate memory.
+
+        swap() usage has largely been replaced by operator=(const SkPath& path).
+        SkPath do not copy their content on assignment until they are written to,
+        making assignment as efficient as swap().
+
+        @param other  SkPath exchanged by value
+
+        example: https://fiddle.skia.org/c/@Path_swap
+    */
+    void swap(SkPath& other);
+
+    /** Returns minimum and maximum axes values of SkPoint array.
+        Returns (0, 0, 0, 0) if SkPath contains no points. Returned bounds width and height may
+        be larger or smaller than area affected when SkPath is drawn.
+
+        SkRect returned includes all SkPoint added to SkPath, including SkPoint associated with
+        kMove_Verb that define empty contours.
+
+        @return  bounds of all SkPoint in SkPoint array
+    */
+    const SkRect& getBounds() const;
+
+    /** Updates internal bounds so that subsequent calls to getBounds() are instantaneous.
+        Unaltered copies of SkPath may also access cached bounds through getBounds().
+
+        For now, identical to calling getBounds() and ignoring the returned value.
+
+        Call to prepare SkPath subsequently drawn from multiple threads,
+        to avoid a race condition where each draw separately computes the bounds.
+    */
+    void updateBoundsCache() const {
+        // for now, just calling getBounds() is sufficient
+        this->getBounds();
+    }
+
+    /** Returns minimum and maximum axes values of the lines and curves in SkPath.
+        Returns (0, 0, 0, 0) if SkPath contains no points.
+        Returned bounds width and height may be larger or smaller than area affected
+        when SkPath is drawn.
+
+        Includes SkPoint associated with kMove_Verb that define empty
+        contours.
+
+        Behaves identically to getBounds() when SkPath contains
+        only lines. If SkPath contains curves, computed bounds includes
+        the maximum extent of the quad, conic, or cubic; is slower than getBounds();
+        and unlike getBounds(), does not cache the result.
+
+        @return  tight bounds of curves in SkPath
+
+        example: https://fiddle.skia.org/c/@Path_computeTightBounds
+    */
+    SkRect computeTightBounds() const;
+
+    /** Returns true if rect is contained by SkPath.
+        May return false when rect is contained by SkPath.
+
+        For now, only returns true if SkPath has one contour and is convex.
+        rect may share points and edges with SkPath and be contained.
+        Returns true if rect is empty, that is, it has zero width or height; and
+        the SkPoint or line described by rect is contained by SkPath.
+
+        @param rect  SkRect, line, or SkPoint checked for containment
+        @return      true if rect is contained
+
+        example: https://fiddle.skia.org/c/@Path_conservativelyContainsRect
+    */
+    bool conservativelyContainsRect(const SkRect& rect) const;
+
+    /** Grows SkPath verb array and SkPoint array to contain extraPtCount additional SkPoint.
+        May improve performance and use less memory by
+        reducing the number and size of allocations when creating SkPath.
+
+        @param extraPtCount  number of additional SkPoint to allocate
+
+        example: https://fiddle.skia.org/c/@Path_incReserve
+    */
+    void incReserve(int extraPtCount);
+
+#ifdef SK_HIDE_PATH_EDIT_METHODS
+private:
+#endif
+
+    /** Adds beginning of contour at SkPoint (x, y).
+
+        @param x  x-axis value of contour start
+        @param y  y-axis value of contour start
+        @return   reference to SkPath
+
+        example: https://fiddle.skia.org/c/@Path_moveTo
+    */
+    SkPath& moveTo(SkScalar x, SkScalar y);
+
+    /** Adds beginning of contour at SkPoint p.
+
+        @param p  contour start
+        @return   reference to SkPath
+    */
+    SkPath& moveTo(const SkPoint& p) {
+        return this->moveTo(p.fX, p.fY);
+    }
+
+    /** Adds beginning of contour relative to last point.
+        If SkPath is empty, starts contour at (dx, dy).
+        Otherwise, start contour at last point offset by (dx, dy).
+        Function name stands for "relative move to".
+
+        @param dx  offset from last point to contour start on x-axis
+        @param dy  offset from last point to contour start on y-axis
+        @return    reference to SkPath
+
+        example: https://fiddle.skia.org/c/@Path_rMoveTo
+    */
+    SkPath& rMoveTo(SkScalar dx, SkScalar dy);
+
+    /** Adds line from last point to (x, y). If SkPath is empty, or last SkPath::Verb is
+        kClose_Verb, last point is set to (0, 0) before adding line.
+
+        lineTo() appends kMove_Verb to verb array and (0, 0) to SkPoint array, if needed.
+        lineTo() then appends kLine_Verb to verb array and (x, y) to SkPoint array.
+
+        @param x  end of added line on x-axis
+        @param y  end of added line on y-axis
+        @return   reference to SkPath
+
+        example: https://fiddle.skia.org/c/@Path_lineTo
+    */
+    SkPath& lineTo(SkScalar x, SkScalar y);
+
+    /** Adds line from last point to SkPoint p. If SkPath is empty, or last SkPath::Verb is
+        kClose_Verb, last point is set to (0, 0) before adding line.
+
+        lineTo() first appends kMove_Verb to verb array and (0, 0) to SkPoint array, if needed.
+        lineTo() then appends kLine_Verb to verb array and SkPoint p to SkPoint array.
+
+        @param p  end SkPoint of added line
+        @return   reference to SkPath
+    */
+    SkPath& lineTo(const SkPoint& p) {
+        return this->lineTo(p.fX, p.fY);
+    }
+
+    /** Adds line from last point to vector (dx, dy). If SkPath is empty, or last SkPath::Verb is
+        kClose_Verb, last point is set to (0, 0) before adding line.
+
+        Appends kMove_Verb to verb array and (0, 0) to SkPoint array, if needed;
+        then appends kLine_Verb to verb array and line end to SkPoint array.
+        Line end is last point plus vector (dx, dy).
+        Function name stands for "relative line to".
+
+        @param dx  offset from last point to line end on x-axis
+        @param dy  offset from last point to line end on y-axis
+        @return    reference to SkPath
+
+        example: https://fiddle.skia.org/c/@Path_rLineTo
+        example: https://fiddle.skia.org/c/@Quad_a
+        example: https://fiddle.skia.org/c/@Quad_b
+    */
+    SkPath& rLineTo(SkScalar dx, SkScalar dy);
+
+    /** Adds quad from last point towards (x1, y1), to (x2, y2).
+        If SkPath is empty, or last SkPath::Verb is kClose_Verb, last point is set to (0, 0)
+        before adding quad.
+
+        Appends kMove_Verb to verb array and (0, 0) to SkPoint array, if needed;
+        then appends kQuad_Verb to verb array; and (x1, y1), (x2, y2)
+        to SkPoint array.
+
+        @param x1  control SkPoint of quad on x-axis
+        @param y1  control SkPoint of quad on y-axis
+        @param x2  end SkPoint of quad on x-axis
+        @param y2  end SkPoint of quad on y-axis
+        @return    reference to SkPath
+
+        example: https://fiddle.skia.org/c/@Path_quadTo
+    */
+    SkPath& quadTo(SkScalar x1, SkScalar y1, SkScalar x2, SkScalar y2);
+
+    /** Adds quad from last point towards SkPoint p1, to SkPoint p2.
+        If SkPath is empty, or last SkPath::Verb is kClose_Verb, last point is set to (0, 0)
+        before adding quad.
+
+        Appends kMove_Verb to verb array and (0, 0) to SkPoint array, if needed;
+        then appends kQuad_Verb to verb array; and SkPoint p1, p2
+        to SkPoint array.
+
+        @param p1  control SkPoint of added quad
+        @param p2  end SkPoint of added quad
+        @return    reference to SkPath
+    */
+    SkPath& quadTo(const SkPoint& p1, const SkPoint& p2) {
+        return this->quadTo(p1.fX, p1.fY, p2.fX, p2.fY);
+    }
+
+    /** Adds quad from last point towards vector (dx1, dy1), to vector (dx2, dy2).
+        If SkPath is empty, or last SkPath::Verb
+        is kClose_Verb, last point is set to (0, 0) before adding quad.
+
+        Appends kMove_Verb to verb array and (0, 0) to SkPoint array,
+        if needed; then appends kQuad_Verb to verb array; and appends quad
+        control and quad end to SkPoint array.
+        Quad control is last point plus vector (dx1, dy1).
+        Quad end is last point plus vector (dx2, dy2).
+        Function name stands for "relative quad to".
+
+        @param dx1  offset from last point to quad control on x-axis
+        @param dy1  offset from last point to quad control on y-axis
+        @param dx2  offset from last point to quad end on x-axis
+        @param dy2  offset from last point to quad end on y-axis
+        @return     reference to SkPath
+
+        example: https://fiddle.skia.org/c/@Conic_Weight_a
+        example: https://fiddle.skia.org/c/@Conic_Weight_b
+        example: https://fiddle.skia.org/c/@Conic_Weight_c
+        example: https://fiddle.skia.org/c/@Path_rQuadTo
+    */
+    SkPath& rQuadTo(SkScalar dx1, SkScalar dy1, SkScalar dx2, SkScalar dy2);
+
+    /** Adds conic from last point towards (x1, y1), to (x2, y2), weighted by w.
+        If SkPath is empty, or last SkPath::Verb is kClose_Verb, last point is set to (0, 0)
+        before adding conic.
+
+        Appends kMove_Verb to verb array and (0, 0) to SkPoint array, if needed.
+
+        If w is finite and not one, appends kConic_Verb to verb array;
+        and (x1, y1), (x2, y2) to SkPoint array; and w to conic weights.
+
+        If w is one, appends kQuad_Verb to verb array, and
+        (x1, y1), (x2, y2) to SkPoint array.
+
+        If w is not finite, appends kLine_Verb twice to verb array, and
+        (x1, y1), (x2, y2) to SkPoint array.
+
+        @param x1  control SkPoint of conic on x-axis
+        @param y1  control SkPoint of conic on y-axis
+        @param x2  end SkPoint of conic on x-axis
+        @param y2  end SkPoint of conic on y-axis
+        @param w   weight of added conic
+        @return    reference to SkPath
+    */
+    SkPath& conicTo(SkScalar x1, SkScalar y1, SkScalar x2, SkScalar y2,
+                    SkScalar w);
+
+    /** Adds conic from last point towards SkPoint p1, to SkPoint p2, weighted by w.
+        If SkPath is empty, or last SkPath::Verb is kClose_Verb, last point is set to (0, 0)
+        before adding conic.
+
+        Appends kMove_Verb to verb array and (0, 0) to SkPoint array, if needed.
+
+        If w is finite and not one, appends kConic_Verb to verb array;
+        and SkPoint p1, p2 to SkPoint array; and w to conic weights.
+
+        If w is one, appends kQuad_Verb to verb array, and SkPoint p1, p2
+        to SkPoint array.
+
+        If w is not finite, appends kLine_Verb twice to verb array, and
+        SkPoint p1, p2 to SkPoint array.
+
+        @param p1  control SkPoint of added conic
+        @param p2  end SkPoint of added conic
+        @param w   weight of added conic
+        @return    reference to SkPath
+    */
+    SkPath& conicTo(const SkPoint& p1, const SkPoint& p2, SkScalar w) {
+        return this->conicTo(p1.fX, p1.fY, p2.fX, p2.fY, w);
+    }
+
+    /** Adds conic from last point towards vector (dx1, dy1), to vector (dx2, dy2),
+        weighted by w. If SkPath is empty, or last SkPath::Verb
+        is kClose_Verb, last point is set to (0, 0) before adding conic.
+
+        Appends kMove_Verb to verb array and (0, 0) to SkPoint array,
+        if needed.
+
+        If w is finite and not one, next appends kConic_Verb to verb array,
+        and w is recorded as conic weight; otherwise, if w is one, appends
+        kQuad_Verb to verb array; or if w is not finite, appends kLine_Verb
+        twice to verb array.
+
+        In all cases appends SkPoint control and end to SkPoint array.
+        control is last point plus vector (dx1, dy1).
+        end is last point plus vector (dx2, dy2).
+
+        Function name stands for "relative conic to".
+
+        @param dx1  offset from last point to conic control on x-axis
+        @param dy1  offset from last point to conic control on y-axis
+        @param dx2  offset from last point to conic end on x-axis
+        @param dy2  offset from last point to conic end on y-axis
+        @param w    weight of added conic
+        @return     reference to SkPath
+    */
+    SkPath& rConicTo(SkScalar dx1, SkScalar dy1, SkScalar dx2, SkScalar dy2,
+                     SkScalar w);
+
+    /** Adds cubic from last point towards (x1, y1), then towards (x2, y2), ending at
+        (x3, y3). If SkPath is empty, or last SkPath::Verb is kClose_Verb, last point is set to
+        (0, 0) before adding cubic.
+
+        Appends kMove_Verb to verb array and (0, 0) to SkPoint array, if needed;
+        then appends kCubic_Verb to verb array; and (x1, y1), (x2, y2), (x3, y3)
+        to SkPoint array.
+
+        @param x1  first control SkPoint of cubic on x-axis
+        @param y1  first control SkPoint of cubic on y-axis
+        @param x2  second control SkPoint of cubic on x-axis
+        @param y2  second control SkPoint of cubic on y-axis
+        @param x3  end SkPoint of cubic on x-axis
+        @param y3  end SkPoint of cubic on y-axis
+        @return    reference to SkPath
+    */
+    SkPath& cubicTo(SkScalar x1, SkScalar y1, SkScalar x2, SkScalar y2,
+                    SkScalar x3, SkScalar y3);
+
+    /** Adds cubic from last point towards SkPoint p1, then towards SkPoint p2, ending at
+        SkPoint p3. If SkPath is empty, or last SkPath::Verb is kClose_Verb, last point is set to
+        (0, 0) before adding cubic.
+
+        Appends kMove_Verb to verb array and (0, 0) to SkPoint array, if needed;
+        then appends kCubic_Verb to verb array; and SkPoint p1, p2, p3
+        to SkPoint array.
+
+        @param p1  first control SkPoint of cubic
+        @param p2  second control SkPoint of cubic
+        @param p3  end SkPoint of cubic
+        @return    reference to SkPath
+    */
+    SkPath& cubicTo(const SkPoint& p1, const SkPoint& p2, const SkPoint& p3) {
+        return this->cubicTo(p1.fX, p1.fY, p2.fX, p2.fY, p3.fX, p3.fY);
+    }
+
+    /** Adds cubic from last point towards vector (dx1, dy1), then towards
+        vector (dx2, dy2), to vector (dx3, dy3).
+        If SkPath is empty, or last SkPath::Verb
+        is kClose_Verb, last point is set to (0, 0) before adding cubic.
+
+        Appends kMove_Verb to verb array and (0, 0) to SkPoint array,
+        if needed; then appends kCubic_Verb to verb array; and appends cubic
+        control and cubic end to SkPoint array.
+        Cubic control is last point plus vector (dx1, dy1).
+        Cubic end is last point plus vector (dx2, dy2).
+        Function name stands for "relative cubic to".
+
+        @param dx1  offset from last point to first cubic control on x-axis
+        @param dy1  offset from last point to first cubic control on y-axis
+        @param dx2  offset from last point to second cubic control on x-axis
+        @param dy2  offset from last point to second cubic control on y-axis
+        @param dx3  offset from last point to cubic end on x-axis
+        @param dy3  offset from last point to cubic end on y-axis
+        @return    reference to SkPath
+    */
+    SkPath& rCubicTo(SkScalar dx1, SkScalar dy1, SkScalar dx2, SkScalar dy2,
+                     SkScalar dx3, SkScalar dy3);
+
+    /** Appends arc to SkPath. Arc added is part of ellipse
+        bounded by oval, from startAngle through sweepAngle. Both startAngle and
+        sweepAngle are measured in degrees, where zero degrees is aligned with the
+        positive x-axis, and positive sweeps extends arc clockwise.
+
+        arcTo() adds line connecting SkPath last SkPoint to initial arc SkPoint if forceMoveTo
+        is false and SkPath is not empty. Otherwise, added contour begins with first point
+        of arc. Angles greater than -360 and less than 360 are treated modulo 360.
+
+        @param oval         bounds of ellipse containing arc
+        @param startAngle   starting angle of arc in degrees
+        @param sweepAngle   sweep, in degrees. Positive is clockwise; treated modulo 360
+        @param forceMoveTo  true to start a new contour with arc
+        @return             reference to SkPath
+
+        example: https://fiddle.skia.org/c/@Path_arcTo
+    */
+    SkPath& arcTo(const SkRect& oval, SkScalar startAngle, SkScalar sweepAngle, bool forceMoveTo);
+
+    /** Appends arc to SkPath, after appending line if needed. Arc is implemented by conic
+        weighted to describe part of circle. Arc is contained by tangent from
+        last SkPath point to (x1, y1), and tangent from (x1, y1) to (x2, y2). Arc
+        is part of circle sized to radius, positioned so it touches both tangent lines.
+
+        If last Path Point does not start Arc, arcTo appends connecting Line to Path.
+        The length of Vector from (x1, y1) to (x2, y2) does not affect Arc.
+
+        Arc sweep is always less than 180 degrees. If radius is zero, or if
+        tangents are nearly parallel, arcTo appends Line from last Path Point to (x1, y1).
+
+        arcTo appends at most one Line and one conic.
+        arcTo implements the functionality of PostScript arct and HTML Canvas arcTo.
+
+        @param x1      x-axis value common to pair of tangents
+        @param y1      y-axis value common to pair of tangents
+        @param x2      x-axis value end of second tangent
+        @param y2      y-axis value end of second tangent
+        @param radius  distance from arc to circle center
+        @return        reference to SkPath
+
+        example: https://fiddle.skia.org/c/@Path_arcTo_2_a
+        example: https://fiddle.skia.org/c/@Path_arcTo_2_b
+        example: https://fiddle.skia.org/c/@Path_arcTo_2_c
+    */
+    SkPath& arcTo(SkScalar x1, SkScalar y1, SkScalar x2, SkScalar y2, SkScalar radius);
+
+    /** Appends arc to SkPath, after appending line if needed. Arc is implemented by conic
+        weighted to describe part of circle. Arc is contained by tangent from
+        last SkPath point to p1, and tangent from p1 to p2. Arc
+        is part of circle sized to radius, positioned so it touches both tangent lines.
+
+        If last SkPath SkPoint does not start arc, arcTo() appends connecting line to SkPath.
+        The length of vector from p1 to p2 does not affect arc.
+
+        Arc sweep is always less than 180 degrees. If radius is zero, or if
+        tangents are nearly parallel, arcTo() appends line from last SkPath SkPoint to p1.
+
+        arcTo() appends at most one line and one conic.
+        arcTo() implements the functionality of PostScript arct and HTML Canvas arcTo.
+
+        @param p1      SkPoint common to pair of tangents
+        @param p2      end of second tangent
+        @param radius  distance from arc to circle center
+        @return        reference to SkPath
+    */
+    SkPath& arcTo(const SkPoint p1, const SkPoint p2, SkScalar radius) {
+        return this->arcTo(p1.fX, p1.fY, p2.fX, p2.fY, radius);
+    }
+
+    /** \enum SkPath::ArcSize
+        Four oval parts with radii (rx, ry) start at last SkPath SkPoint and ends at (x, y).
+        ArcSize and Direction select one of the four oval parts.
+    */
+    enum ArcSize {
+        kSmall_ArcSize, //!< smaller of arc pair
+        kLarge_ArcSize, //!< larger of arc pair
+    };
+
+    /** Appends arc to SkPath. Arc is implemented by one or more conics weighted to
+        describe part of oval with radii (rx, ry) rotated by xAxisRotate degrees. Arc
+        curves from last SkPath SkPoint to (x, y), choosing one of four possible routes:
+        clockwise or counterclockwise, and smaller or larger.
+
+        Arc sweep is always less than 360 degrees. arcTo() appends line to (x, y) if
+        either radii are zero, or if last SkPath SkPoint equals (x, y). arcTo() scales radii
+        (rx, ry) to fit last SkPath SkPoint and (x, y) if both are greater than zero but
+        too small.
+
+        arcTo() appends up to four conic curves.
+        arcTo() implements the functionality of SVG arc, although SVG sweep-flag value
+        is opposite the integer value of sweep; SVG sweep-flag uses 1 for clockwise,
+        while kCW_Direction cast to int is zero.
+
+        @param rx           radius on x-axis before x-axis rotation
+        @param ry           radius on y-axis before x-axis rotation
+        @param xAxisRotate  x-axis rotation in degrees; positive values are clockwise
+        @param largeArc     chooses smaller or larger arc
+        @param sweep        chooses clockwise or counterclockwise arc
+        @param x            end of arc
+        @param y            end of arc
+        @return             reference to SkPath
+    */
+    SkPath& arcTo(SkScalar rx, SkScalar ry, SkScalar xAxisRotate, ArcSize largeArc,
+                  SkPathDirection sweep, SkScalar x, SkScalar y);
+
+    /** Appends arc to SkPath. Arc is implemented by one or more conic weighted to describe
+        part of oval with radii (r.fX, r.fY) rotated by xAxisRotate degrees. Arc curves
+        from last SkPath SkPoint to (xy.fX, xy.fY), choosing one of four possible routes:
+        clockwise or counterclockwise,
+        and smaller or larger.
+
+        Arc sweep is always less than 360 degrees. arcTo() appends line to xy if either
+        radii are zero, or if last SkPath SkPoint equals (xy.fX, xy.fY). arcTo() scales radii r to
+        fit last SkPath SkPoint and xy if both are greater than zero but too small to describe
+        an arc.
+
+        arcTo() appends up to four conic curves.
+        arcTo() implements the functionality of SVG arc, although SVG sweep-flag value is
+        opposite the integer value of sweep; SVG sweep-flag uses 1 for clockwise, while
+        kCW_Direction cast to int is zero.
+
+        @param r            radii on axes before x-axis rotation
+        @param xAxisRotate  x-axis rotation in degrees; positive values are clockwise
+        @param largeArc     chooses smaller or larger arc
+        @param sweep        chooses clockwise or counterclockwise arc
+        @param xy           end of arc
+        @return             reference to SkPath
+    */
+    SkPath& arcTo(const SkPoint r, SkScalar xAxisRotate, ArcSize largeArc, SkPathDirection sweep,
+               const SkPoint xy) {
+        return this->arcTo(r.fX, r.fY, xAxisRotate, largeArc, sweep, xy.fX, xy.fY);
+    }
+
+    /** Appends arc to SkPath, relative to last SkPath SkPoint. Arc is implemented by one or
+        more conic, weighted to describe part of oval with radii (rx, ry) rotated by
+        xAxisRotate degrees. Arc curves from last SkPath SkPoint to relative end SkPoint:
+        (dx, dy), choosing one of four possible routes: clockwise or
+        counterclockwise, and smaller or larger. If SkPath is empty, the start arc SkPoint
+        is (0, 0).
+
+        Arc sweep is always less than 360 degrees. arcTo() appends line to end SkPoint
+        if either radii are zero, or if last SkPath SkPoint equals end SkPoint.
+        arcTo() scales radii (rx, ry) to fit last SkPath SkPoint and end SkPoint if both are
+        greater than zero but too small to describe an arc.
+
+        arcTo() appends up to four conic curves.
+        arcTo() implements the functionality of svg arc, although SVG "sweep-flag" value is
+        opposite the integer value of sweep; SVG "sweep-flag" uses 1 for clockwise, while
+        kCW_Direction cast to int is zero.
+
+        @param rx           radius before x-axis rotation
+        @param ry           radius before x-axis rotation
+        @param xAxisRotate  x-axis rotation in degrees; positive values are clockwise
+        @param largeArc     chooses smaller or larger arc
+        @param sweep        chooses clockwise or counterclockwise arc
+        @param dx           x-axis offset end of arc from last SkPath SkPoint
+        @param dy           y-axis offset end of arc from last SkPath SkPoint
+        @return             reference to SkPath
+    */
+    SkPath& rArcTo(SkScalar rx, SkScalar ry, SkScalar xAxisRotate, ArcSize largeArc,
+                   SkPathDirection sweep, SkScalar dx, SkScalar dy);
+
+    /** Appends kClose_Verb to SkPath. A closed contour connects the first and last SkPoint
+        with line, forming a continuous loop. Open and closed contour draw the same
+        with SkPaint::kFill_Style. With SkPaint::kStroke_Style, open contour draws
+        SkPaint::Cap at contour start and end; closed contour draws
+        SkPaint::Join at contour start and end.
+
+        close() has no effect if SkPath is empty or last SkPath SkPath::Verb is kClose_Verb.
+
+        @return  reference to SkPath
+
+        example: https://fiddle.skia.org/c/@Path_close
+    */
+    SkPath& close();
+
+#ifdef SK_HIDE_PATH_EDIT_METHODS
+public:
+#endif
+
+    /** Approximates conic with quad array. Conic is constructed from start SkPoint p0,
+        control SkPoint p1, end SkPoint p2, and weight w.
+        Quad array is stored in pts; this storage is supplied by caller.
+        Maximum quad count is 2 to the pow2.
+        Every third point in array shares last SkPoint of previous quad and first SkPoint of
+        next quad. Maximum pts storage size is given by:
+        (1 + 2 * (1 << pow2)) * sizeof(SkPoint).
+
+        Returns quad count used the approximation, which may be smaller
+        than the number requested.
+
+        conic weight determines the amount of influence conic control point has on the curve.
+        w less than one represents an elliptical section. w greater than one represents
+        a hyperbolic section. w equal to one represents a parabolic section.
+
+        Two quad curves are sufficient to approximate an elliptical conic with a sweep
+        of up to 90 degrees; in this case, set pow2 to one.
+
+        @param p0    conic start SkPoint
+        @param p1    conic control SkPoint
+        @param p2    conic end SkPoint
+        @param w     conic weight
+        @param pts   storage for quad array
+        @param pow2  quad count, as power of two, normally 0 to 5 (1 to 32 quad curves)
+        @return      number of quad curves written to pts
+    */
+    static int ConvertConicToQuads(const SkPoint& p0, const SkPoint& p1, const SkPoint& p2,
+                                   SkScalar w, SkPoint pts[], int pow2);
+
+    /** Returns true if SkPath is equivalent to SkRect when filled.
+        If false: rect, isClosed, and direction are unchanged.
+        If true: rect, isClosed, and direction are written to if not nullptr.
+
+        rect may be smaller than the SkPath bounds. SkPath bounds may include kMove_Verb points
+        that do not alter the area drawn by the returned rect.
+
+        @param rect       storage for bounds of SkRect; may be nullptr
+        @param isClosed   storage set to true if SkPath is closed; may be nullptr
+        @param direction  storage set to SkRect direction; may be nullptr
+        @return           true if SkPath contains SkRect
+
+        example: https://fiddle.skia.org/c/@Path_isRect
+    */
+    bool isRect(SkRect* rect, bool* isClosed = nullptr, SkPathDirection* direction = nullptr) const;
+
+#ifdef SK_HIDE_PATH_EDIT_METHODS
+private:
+#endif
+
+    /** Adds a new contour to the path, defined by the rect, and wound in the
+        specified direction. The verbs added to the path will be:
+
+        kMove, kLine, kLine, kLine, kClose
+
+        start specifies which corner to begin the contour:
+            0: upper-left  corner
+            1: upper-right corner
+            2: lower-right corner
+            3: lower-left  corner
+
+        This start point also acts as the implied beginning of the subsequent,
+        contour, if it does not have an explicit moveTo(). e.g.
+
+            path.addRect(...)
+            // if we don't say moveTo() here, we will use the rect's start point
+            path.lineTo(...)
+
+        @param rect   SkRect to add as a closed contour
+        @param dir    SkPath::Direction to orient the new contour
+        @param start  initial corner of SkRect to add
+        @return       reference to SkPath
+
+        example: https://fiddle.skia.org/c/@Path_addRect_2
+     */
+    SkPath& addRect(const SkRect& rect, SkPathDirection dir, unsigned start);
+
+    SkPath& addRect(const SkRect& rect, SkPathDirection dir = SkPathDirection::kCW) {
+        return this->addRect(rect, dir, 0);
+    }
+
+    SkPath& addRect(SkScalar left, SkScalar top, SkScalar right, SkScalar bottom,
+                    SkPathDirection dir = SkPathDirection::kCW) {
+        return this->addRect({left, top, right, bottom}, dir, 0);
+    }
+
+    /** Adds oval to path, appending kMove_Verb, four kConic_Verb, and kClose_Verb.
+        Oval is upright ellipse bounded by SkRect oval with radii equal to half oval width
+        and half oval height. Oval begins at (oval.fRight, oval.centerY()) and continues
+        clockwise if dir is kCW_Direction, counterclockwise if dir is kCCW_Direction.
+
+        @param oval  bounds of ellipse added
+        @param dir   SkPath::Direction to wind ellipse
+        @return      reference to SkPath
+
+        example: https://fiddle.skia.org/c/@Path_addOval
+    */
+    SkPath& addOval(const SkRect& oval, SkPathDirection dir = SkPathDirection::kCW);
+
+    /** Adds oval to SkPath, appending kMove_Verb, four kConic_Verb, and kClose_Verb.
+        Oval is upright ellipse bounded by SkRect oval with radii equal to half oval width
+        and half oval height. Oval begins at start and continues
+        clockwise if dir is kCW_Direction, counterclockwise if dir is kCCW_Direction.
+
+        @param oval   bounds of ellipse added
+        @param dir    SkPath::Direction to wind ellipse
+        @param start  index of initial point of ellipse
+        @return       reference to SkPath
+
+        example: https://fiddle.skia.org/c/@Path_addOval_2
+    */
+    SkPath& addOval(const SkRect& oval, SkPathDirection dir, unsigned start);
+
+    /** Adds circle centered at (x, y) of size radius to SkPath, appending kMove_Verb,
+        four kConic_Verb, and kClose_Verb. Circle begins at: (x + radius, y), continuing
+        clockwise if dir is kCW_Direction, and counterclockwise if dir is kCCW_Direction.
+
+        Has no effect if radius is zero or negative.
+
+        @param x       center of circle
+        @param y       center of circle
+        @param radius  distance from center to edge
+        @param dir     SkPath::Direction to wind circle
+        @return        reference to SkPath
+    */
+    SkPath& addCircle(SkScalar x, SkScalar y, SkScalar radius,
+                      SkPathDirection dir = SkPathDirection::kCW);
+
+    /** Appends arc to SkPath, as the start of new contour. Arc added is part of ellipse
+        bounded by oval, from startAngle through sweepAngle. Both startAngle and
+        sweepAngle are measured in degrees, where zero degrees is aligned with the
+        positive x-axis, and positive sweeps extends arc clockwise.
+
+        If sweepAngle <= -360, or sweepAngle >= 360; and startAngle modulo 90 is nearly
+        zero, append oval instead of arc. Otherwise, sweepAngle values are treated
+        modulo 360, and arc may or may not draw depending on numeric rounding.
+
+        @param oval        bounds of ellipse containing arc
+        @param startAngle  starting angle of arc in degrees
+        @param sweepAngle  sweep, in degrees. Positive is clockwise; treated modulo 360
+        @return            reference to SkPath
+
+        example: https://fiddle.skia.org/c/@Path_addArc
+    */
+    SkPath& addArc(const SkRect& oval, SkScalar startAngle, SkScalar sweepAngle);
+
+    /** Appends SkRRect to SkPath, creating a new closed contour. SkRRect has bounds
+        equal to rect; each corner is 90 degrees of an ellipse with radii (rx, ry). If
+        dir is kCW_Direction, SkRRect starts at top-left of the lower-left corner and
+        winds clockwise. If dir is kCCW_Direction, SkRRect starts at the bottom-left
+        of the upper-left corner and winds counterclockwise.
+
+        If either rx or ry is too large, rx and ry are scaled uniformly until the
+        corners fit. If rx or ry is less than or equal to zero, addRoundRect() appends
+        SkRect rect to SkPath.
+
+        After appending, SkPath may be empty, or may contain: SkRect, oval, or SkRRect.
+
+        @param rect  bounds of SkRRect
+        @param rx    x-axis radius of rounded corners on the SkRRect
+        @param ry    y-axis radius of rounded corners on the SkRRect
+        @param dir   SkPath::Direction to wind SkRRect
+        @return      reference to SkPath
+    */
+    SkPath& addRoundRect(const SkRect& rect, SkScalar rx, SkScalar ry,
+                         SkPathDirection dir = SkPathDirection::kCW);
+
+    /** Appends SkRRect to SkPath, creating a new closed contour. SkRRect has bounds
+        equal to rect; each corner is 90 degrees of an ellipse with radii from the
+        array.
+
+        @param rect   bounds of SkRRect
+        @param radii  array of 8 SkScalar values, a radius pair for each corner
+        @param dir    SkPath::Direction to wind SkRRect
+        @return       reference to SkPath
+    */
+    SkPath& addRoundRect(const SkRect& rect, const SkScalar radii[],
+                         SkPathDirection dir = SkPathDirection::kCW);
+
+    /** Adds rrect to SkPath, creating a new closed contour. If
+        dir is kCW_Direction, rrect starts at top-left of the lower-left corner and
+        winds clockwise. If dir is kCCW_Direction, rrect starts at the bottom-left
+        of the upper-left corner and winds counterclockwise.
+
+        After appending, SkPath may be empty, or may contain: SkRect, oval, or SkRRect.
+
+        @param rrect  bounds and radii of rounded rectangle
+        @param dir    SkPath::Direction to wind SkRRect
+        @return       reference to SkPath
+
+        example: https://fiddle.skia.org/c/@Path_addRRect
+    */
+    SkPath& addRRect(const SkRRect& rrect, SkPathDirection dir = SkPathDirection::kCW);
+
+    /** Adds rrect to SkPath, creating a new closed contour. If dir is kCW_Direction, rrect
+        winds clockwise; if dir is kCCW_Direction, rrect winds counterclockwise.
+        start determines the first point of rrect to add.
+
+        @param rrect  bounds and radii of rounded rectangle
+        @param dir    SkPath::Direction to wind SkRRect
+        @param start  index of initial point of SkRRect
+        @return       reference to SkPath
+
+        example: https://fiddle.skia.org/c/@Path_addRRect_2
+    */
+    SkPath& addRRect(const SkRRect& rrect, SkPathDirection dir, unsigned start);
+
+    /** Adds contour created from line array, adding (count - 1) line segments.
+        Contour added starts at pts[0], then adds a line for every additional SkPoint
+        in pts array. If close is true, appends kClose_Verb to SkPath, connecting
+        pts[count - 1] and pts[0].
+
+        If count is zero, append kMove_Verb to path.
+        Has no effect if count is less than one.
+
+        @param pts    array of line sharing end and start SkPoint
+        @param count  length of SkPoint array
+        @param close  true to add line connecting contour end and start
+        @return       reference to SkPath
+
+        example: https://fiddle.skia.org/c/@Path_addPoly
+    */
+    SkPath& addPoly(const SkPoint pts[], int count, bool close);
+
+    /** Adds contour created from list. Contour added starts at list[0], then adds a line
+        for every additional SkPoint in list. If close is true, appends kClose_Verb to SkPath,
+        connecting last and first SkPoint in list.
+
+        If list is empty, append kMove_Verb to path.
+
+        @param list   array of SkPoint
+        @param close  true to add line connecting contour end and start
+        @return       reference to SkPath
+    */
+    SkPath& addPoly(const std::initializer_list<SkPoint>& list, bool close) {
+        return this->addPoly(list.begin(), SkToInt(list.size()), close);
+    }
+
+#ifdef SK_HIDE_PATH_EDIT_METHODS
+public:
+#endif
+
+    /** \enum SkPath::AddPathMode
+        AddPathMode chooses how addPath() appends. Adding one SkPath to another can extend
+        the last contour or start a new contour.
+    */
+    enum AddPathMode {
+        /** Contours are appended to the destination path as new contours.
+        */
+        kAppend_AddPathMode,
+        /** Extends the last contour of the destination path with the first countour
+            of the source path, connecting them with a line.  If the last contour is
+            closed, a new empty contour starting at its start point is extended instead.
+            If the destination path is empty, the result is the source path.
+            The last path of the result is closed only if the last path of the source is.
+        */
+        kExtend_AddPathMode,
+    };
+
+    /** Appends src to SkPath, offset by (dx, dy).
+
+        If mode is kAppend_AddPathMode, src verb array, SkPoint array, and conic weights are
+        added unaltered. If mode is kExtend_AddPathMode, add line before appending
+        verbs, SkPoint, and conic weights.
+
+        @param src   SkPath verbs, SkPoint, and conic weights to add
+        @param dx    offset added to src SkPoint array x-axis coordinates
+        @param dy    offset added to src SkPoint array y-axis coordinates
+        @param mode  kAppend_AddPathMode or kExtend_AddPathMode
+        @return      reference to SkPath
+    */
+    SkPath& addPath(const SkPath& src, SkScalar dx, SkScalar dy,
+                    AddPathMode mode = kAppend_AddPathMode);
+
+    /** Appends src to SkPath.
+
+        If mode is kAppend_AddPathMode, src verb array, SkPoint array, and conic weights are
+        added unaltered. If mode is kExtend_AddPathMode, add line before appending
+        verbs, SkPoint, and conic weights.
+
+        @param src   SkPath verbs, SkPoint, and conic weights to add
+        @param mode  kAppend_AddPathMode or kExtend_AddPathMode
+        @return      reference to SkPath
+    */
+    SkPath& addPath(const SkPath& src, AddPathMode mode = kAppend_AddPathMode) {
+        SkMatrix m;
+        m.reset();
+        return this->addPath(src, m, mode);
+    }
+
+    /** Appends src to SkPath, transformed by matrix. Transformed curves may have different
+        verbs, SkPoint, and conic weights.
+
+        If mode is kAppend_AddPathMode, src verb array, SkPoint array, and conic weights are
+        added unaltered. If mode is kExtend_AddPathMode, add line before appending
+        verbs, SkPoint, and conic weights.
+
+        @param src     SkPath verbs, SkPoint, and conic weights to add
+        @param matrix  transform applied to src
+        @param mode    kAppend_AddPathMode or kExtend_AddPathMode
+        @return        reference to SkPath
+    */
+    SkPath& addPath(const SkPath& src, const SkMatrix& matrix,
+                    AddPathMode mode = kAppend_AddPathMode);
+
+    /** Appends src to SkPath, from back to front.
+        Reversed src always appends a new contour to SkPath.
+
+        @param src  SkPath verbs, SkPoint, and conic weights to add
+        @return     reference to SkPath
+
+        example: https://fiddle.skia.org/c/@Path_reverseAddPath
+    */
+    SkPath& reverseAddPath(const SkPath& src);
+
+    /** Offsets SkPoint array by (dx, dy). Offset SkPath replaces dst.
+        If dst is nullptr, SkPath is replaced by offset data.
+
+        @param dx   offset added to SkPoint array x-axis coordinates
+        @param dy   offset added to SkPoint array y-axis coordinates
+        @param dst  overwritten, translated copy of SkPath; may be nullptr
+
+        example: https://fiddle.skia.org/c/@Path_offset
+    */
+    void offset(SkScalar dx, SkScalar dy, SkPath* dst) const;
+
+    /** Offsets SkPoint array by (dx, dy). SkPath is replaced by offset data.
+
+        @param dx  offset added to SkPoint array x-axis coordinates
+        @param dy  offset added to SkPoint array y-axis coordinates
+    */
+    void offset(SkScalar dx, SkScalar dy) {
+        this->offset(dx, dy, this);
+    }
+
+    /** Transforms verb array, SkPoint array, and weight by matrix.
+        transform may change verbs and increase their number.
+        Transformed SkPath replaces dst; if dst is nullptr, original data
+        is replaced.
+
+        @param matrix  SkMatrix to apply to SkPath
+        @param dst     overwritten, transformed copy of SkPath; may be nullptr
+        @param pc      whether to apply perspective clipping
+
+        example: https://fiddle.skia.org/c/@Path_transform
+    */
+    void transform(const SkMatrix& matrix, SkPath* dst,
+                   SkApplyPerspectiveClip pc = SkApplyPerspectiveClip::kYes) const;
+
+    /** Transforms verb array, SkPoint array, and weight by matrix.
+        transform may change verbs and increase their number.
+        SkPath is replaced by transformed data.
+
+        @param matrix  SkMatrix to apply to SkPath
+        @param pc      whether to apply perspective clipping
+    */
+    void transform(const SkMatrix& matrix,
+                   SkApplyPerspectiveClip pc = SkApplyPerspectiveClip::kYes) {
+        this->transform(matrix, this, pc);
+    }
+
+    SkPath makeTransform(const SkMatrix& m,
+                         SkApplyPerspectiveClip pc = SkApplyPerspectiveClip::kYes) const {
+        SkPath dst;
+        this->transform(m, &dst, pc);
+        return dst;
+    }
+
+    SkPath makeScale(SkScalar sx, SkScalar sy) {
+        return this->makeTransform(SkMatrix::Scale(sx, sy), SkApplyPerspectiveClip::kNo);
+    }
+
+    /** Returns last point on SkPath in lastPt. Returns false if SkPoint array is empty,
+        storing (0, 0) if lastPt is not nullptr.
+
+        @param lastPt  storage for final SkPoint in SkPoint array; may be nullptr
+        @return        true if SkPoint array contains one or more SkPoint
+
+        example: https://fiddle.skia.org/c/@Path_getLastPt
+    */
+    bool getLastPt(SkPoint* lastPt) const;
+
+    /** Sets last point to (x, y). If SkPoint array is empty, append kMove_Verb to
+        verb array and append (x, y) to SkPoint array.
+
+        @param x  set x-axis value of last point
+        @param y  set y-axis value of last point
+
+        example: https://fiddle.skia.org/c/@Path_setLastPt
+    */
+    void setLastPt(SkScalar x, SkScalar y);
+
+    /** Sets the last point on the path. If SkPoint array is empty, append kMove_Verb to
+        verb array and append p to SkPoint array.
+
+        @param p  set value of last point
+    */
+    void setLastPt(const SkPoint& p) {
+        this->setLastPt(p.fX, p.fY);
+    }
+
+    /** \enum SkPath::SegmentMask
+        SegmentMask constants correspond to each drawing Verb type in SkPath; for
+        instance, if SkPath only contains lines, only the kLine_SegmentMask bit is set.
+    */
+    enum SegmentMask {
+        kLine_SegmentMask  = kLine_SkPathSegmentMask,
+        kQuad_SegmentMask  = kQuad_SkPathSegmentMask,
+        kConic_SegmentMask = kConic_SkPathSegmentMask,
+        kCubic_SegmentMask = kCubic_SkPathSegmentMask,
+    };
+
+    /** Returns a mask, where each set bit corresponds to a SegmentMask constant
+        if SkPath contains one or more verbs of that type.
+        Returns zero if SkPath contains no lines, or curves: quads, conics, or cubics.
+
+        getSegmentMasks() returns a cached result; it is very fast.
+
+        @return  SegmentMask bits or zero
+    */
+    uint32_t getSegmentMasks() const;
+
+    /** \enum SkPath::Verb
+        Verb instructs SkPath how to interpret one or more SkPoint and optional conic weight;
+        manage contour, and terminate SkPath.
+    */
+    enum Verb {
+        kMove_Verb  = static_cast<int>(SkPathVerb::kMove),
+        kLine_Verb  = static_cast<int>(SkPathVerb::kLine),
+        kQuad_Verb  = static_cast<int>(SkPathVerb::kQuad),
+        kConic_Verb = static_cast<int>(SkPathVerb::kConic),
+        kCubic_Verb = static_cast<int>(SkPathVerb::kCubic),
+        kClose_Verb = static_cast<int>(SkPathVerb::kClose),
+        kDone_Verb  = kClose_Verb + 1
+    };
+
+    /** \class SkPath::Iter
+        Iterates through verb array, and associated SkPoint array and conic weight.
+        Provides options to treat open contours as closed, and to ignore
+        degenerate data.
+    */
+    class SK_API Iter {
+    public:
+
+        /** Initializes SkPath::Iter with an empty SkPath. next() on SkPath::Iter returns
+            kDone_Verb.
+            Call setPath to initialize SkPath::Iter at a later time.
+
+            @return  SkPath::Iter of empty SkPath
+
+        example: https://fiddle.skia.org/c/@Path_Iter_Iter
+        */
+        Iter();
+
+        /** Sets SkPath::Iter to return elements of verb array, SkPoint array, and conic weight in
+            path. If forceClose is true, SkPath::Iter will add kLine_Verb and kClose_Verb after each
+            open contour. path is not altered.
+
+            @param path        SkPath to iterate
+            @param forceClose  true if open contours generate kClose_Verb
+            @return            SkPath::Iter of path
+
+        example: https://fiddle.skia.org/c/@Path_Iter_const_SkPath
+        */
+        Iter(const SkPath& path, bool forceClose);
+
+        /** Sets SkPath::Iter to return elements of verb array, SkPoint array, and conic weight in
+            path. If forceClose is true, SkPath::Iter will add kLine_Verb and kClose_Verb after each
+            open contour. path is not altered.
+
+            @param path        SkPath to iterate
+            @param forceClose  true if open contours generate kClose_Verb
+
+        example: https://fiddle.skia.org/c/@Path_Iter_setPath
+        */
+        void setPath(const SkPath& path, bool forceClose);
+
+        /** Returns next SkPath::Verb in verb array, and advances SkPath::Iter.
+            When verb array is exhausted, returns kDone_Verb.
+
+            Zero to four SkPoint are stored in pts, depending on the returned SkPath::Verb.
+
+            @param pts  storage for SkPoint data describing returned SkPath::Verb
+            @return     next SkPath::Verb from verb array
+
+        example: https://fiddle.skia.org/c/@Path_RawIter_next
+        */
+        Verb next(SkPoint pts[4]);
+
+        /** Returns conic weight if next() returned kConic_Verb.
+
+            If next() has not been called, or next() did not return kConic_Verb,
+            result is undefined.
+
+            @return  conic weight for conic SkPoint returned by next()
+        */
+        SkScalar conicWeight() const { return *fConicWeights; }
+
+        /** Returns true if last kLine_Verb returned by next() was generated
+            by kClose_Verb. When true, the end point returned by next() is
+            also the start point of contour.
+
+            If next() has not been called, or next() did not return kLine_Verb,
+            result is undefined.
+
+            @return  true if last kLine_Verb was generated by kClose_Verb
+        */
+        bool isCloseLine() const { return SkToBool(fCloseLine); }
+
+        /** Returns true if subsequent calls to next() return kClose_Verb before returning
+            kMove_Verb. if true, contour SkPath::Iter is processing may end with kClose_Verb, or
+            SkPath::Iter may have been initialized with force close set to true.
+
+            @return  true if contour is closed
+
+        example: https://fiddle.skia.org/c/@Path_Iter_isClosedContour
+        */
+        bool isClosedContour() const;
+
+    private:
+        const SkPoint*  fPts;
+        const uint8_t*  fVerbs;
+        const uint8_t*  fVerbStop;
+        const SkScalar* fConicWeights;
+        SkPoint         fMoveTo;
+        SkPoint         fLastPt;
+        bool            fForceClose;
+        bool            fNeedClose;
+        bool            fCloseLine;
+
+        Verb autoClose(SkPoint pts[2]);
+    };
+
+private:
+    /** \class SkPath::RangeIter
+        Iterates through a raw range of path verbs, points, and conics. All values are returned
+        unaltered.
+
+        NOTE: This class will be moved into SkPathPriv once RangeIter is removed.
+    */
+    class RangeIter {
+    public:
+        RangeIter() = default;
+        RangeIter(const uint8_t* verbs, const SkPoint* points, const SkScalar* weights)
+                : fVerb(verbs), fPoints(points), fWeights(weights) {
+            SkDEBUGCODE(fInitialPoints = fPoints;)
+        }
+        bool operator!=(const RangeIter& that) const {
+            return fVerb != that.fVerb;
+        }
+        bool operator==(const RangeIter& that) const {
+            return fVerb == that.fVerb;
+        }
+        RangeIter& operator++() {
+            auto verb = static_cast<SkPathVerb>(*fVerb++);
+            fPoints += pts_advance_after_verb(verb);
+            if (verb == SkPathVerb::kConic) {
+                ++fWeights;
+            }
+            return *this;
+        }
+        RangeIter operator++(int) {
+            RangeIter copy = *this;
+            this->operator++();
+            return copy;
+        }
+        SkPathVerb peekVerb() const {
+            return static_cast<SkPathVerb>(*fVerb);
+        }
+        std::tuple<SkPathVerb, const SkPoint*, const SkScalar*> operator*() const {
+            SkPathVerb verb = this->peekVerb();
+            // We provide the starting point for beziers by peeking backwards from the current
+            // point, which works fine as long as there is always a kMove before any geometry.
+            // (SkPath::injectMoveToIfNeeded should have guaranteed this to be the case.)
+            int backset = pts_backset_for_verb(verb);
+            SkASSERT(fPoints + backset >= fInitialPoints);
+            return {verb, fPoints + backset, fWeights};
+        }
+    private:
+        constexpr static int pts_advance_after_verb(SkPathVerb verb) {
+            switch (verb) {
+                case SkPathVerb::kMove: return 1;
+                case SkPathVerb::kLine: return 1;
+                case SkPathVerb::kQuad: return 2;
+                case SkPathVerb::kConic: return 2;
+                case SkPathVerb::kCubic: return 3;
+                case SkPathVerb::kClose: return 0;
+            }
+            SkUNREACHABLE;
+        }
+        constexpr static int pts_backset_for_verb(SkPathVerb verb) {
+            switch (verb) {
+                case SkPathVerb::kMove: return 0;
+                case SkPathVerb::kLine: return -1;
+                case SkPathVerb::kQuad: return -1;
+                case SkPathVerb::kConic: return -1;
+                case SkPathVerb::kCubic: return -1;
+                case SkPathVerb::kClose: return -1;
+            }
+            SkUNREACHABLE;
+        }
+        const uint8_t* fVerb = nullptr;
+        const SkPoint* fPoints = nullptr;
+        const SkScalar* fWeights = nullptr;
+        SkDEBUGCODE(const SkPoint* fInitialPoints = nullptr;)
+    };
+public:
+
+    /** \class SkPath::RawIter
+        Use Iter instead. This class will soon be removed and RangeIter will be made private.
+    */
+    class SK_API RawIter {
+    public:
+
+        /** Initializes RawIter with an empty SkPath. next() on RawIter returns kDone_Verb.
+            Call setPath to initialize SkPath::Iter at a later time.
+
+            @return  RawIter of empty SkPath
+        */
+        RawIter() {}
+
+        /** Sets RawIter to return elements of verb array, SkPoint array, and conic weight in path.
+
+            @param path  SkPath to iterate
+            @return      RawIter of path
+        */
+        RawIter(const SkPath& path) {
+            setPath(path);
+        }
+
+        /** Sets SkPath::Iter to return elements of verb array, SkPoint array, and conic weight in
+            path.
+
+            @param path  SkPath to iterate
+        */
+        void setPath(const SkPath&);
+
+        /** Returns next SkPath::Verb in verb array, and advances RawIter.
+            When verb array is exhausted, returns kDone_Verb.
+            Zero to four SkPoint are stored in pts, depending on the returned SkPath::Verb.
+
+            @param pts  storage for SkPoint data describing returned SkPath::Verb
+            @return     next SkPath::Verb from verb array
+        */
+        Verb next(SkPoint[4]);
+
+        /** Returns next SkPath::Verb, but does not advance RawIter.
+
+            @return  next SkPath::Verb from verb array
+        */
+        Verb peek() const {
+            return (fIter != fEnd) ? static_cast<Verb>(std::get<0>(*fIter)) : kDone_Verb;
+        }
+
+        /** Returns conic weight if next() returned kConic_Verb.
+
+            If next() has not been called, or next() did not return kConic_Verb,
+            result is undefined.
+
+            @return  conic weight for conic SkPoint returned by next()
+        */
+        SkScalar conicWeight() const {
+            return fConicWeight;
+        }
+
+    private:
+        RangeIter fIter;
+        RangeIter fEnd;
+        SkScalar fConicWeight = 0;
+        friend class SkPath;
+
+    };
+
+    /** Returns true if the point (x, y) is contained by SkPath, taking into
+        account FillType.
+
+        @param x  x-axis value of containment test
+        @param y  y-axis value of containment test
+        @return   true if SkPoint is in SkPath
+
+        example: https://fiddle.skia.org/c/@Path_contains
+    */
+    bool contains(SkScalar x, SkScalar y) const;
+
+    /** Writes text representation of SkPath to stream. If stream is nullptr, writes to
+        standard output. Set dumpAsHex true to generate exact binary representations
+        of floating point numbers used in SkPoint array and conic weights.
+
+        @param stream      writable SkWStream receiving SkPath text representation; may be nullptr
+        @param dumpAsHex   true if SkScalar values are written as hexadecimal
+
+        example: https://fiddle.skia.org/c/@Path_dump
+    */
+    void dump(SkWStream* stream, bool dumpAsHex) const;
+
+    void dump() const { this->dump(nullptr, false); }
+    void dumpHex() const { this->dump(nullptr, true); }
+
+    // Like dump(), but outputs for the SkPath::Make() factory
+    void dumpArrays(SkWStream* stream, bool dumpAsHex) const;
+    void dumpArrays() const { this->dumpArrays(nullptr, false); }
+
+    /** Writes SkPath to buffer, returning the number of bytes written.
+        Pass nullptr to obtain the storage size.
+
+        Writes SkPath::FillType, verb array, SkPoint array, conic weight, and
+        additionally writes computed information like SkPath::Convexity and bounds.
+
+        Use only be used in concert with readFromMemory();
+        the format used for SkPath in memory is not guaranteed.
+
+        @param buffer  storage for SkPath; may be nullptr
+        @return        size of storage required for SkPath; always a multiple of 4
+
+        example: https://fiddle.skia.org/c/@Path_writeToMemory
+    */
+    size_t writeToMemory(void* buffer) const;
+
+    /** Writes SkPath to buffer, returning the buffer written to, wrapped in SkData.
+
+        serialize() writes SkPath::FillType, verb array, SkPoint array, conic weight, and
+        additionally writes computed information like SkPath::Convexity and bounds.
+
+        serialize() should only be used in concert with readFromMemory().
+        The format used for SkPath in memory is not guaranteed.
+
+        @return  SkPath data wrapped in SkData buffer
+
+        example: https://fiddle.skia.org/c/@Path_serialize
+    */
+    sk_sp<SkData> serialize() const;
+
+    /** Initializes SkPath from buffer of size length. Returns zero if the buffer is
+        data is inconsistent, or the length is too small.
+
+        Reads SkPath::FillType, verb array, SkPoint array, conic weight, and
+        additionally reads computed information like SkPath::Convexity and bounds.
+
+        Used only in concert with writeToMemory();
+        the format used for SkPath in memory is not guaranteed.
+
+        @param buffer  storage for SkPath
+        @param length  buffer size in bytes; must be multiple of 4
+        @return        number of bytes read, or zero on failure
+
+        example: https://fiddle.skia.org/c/@Path_readFromMemory
+    */
+    size_t readFromMemory(const void* buffer, size_t length);
+
+    /** (See Skia bug 1762.)
+        Returns a non-zero, globally unique value. A different value is returned
+        if verb array, SkPoint array, or conic weight changes.
+
+        Setting SkPath::FillType does not change generation identifier.
+
+        Each time the path is modified, a different generation identifier will be returned.
+        SkPath::FillType does affect generation identifier on Android framework.
+
+        @return  non-zero, globally unique value
+
+        example: https://fiddle.skia.org/c/@Path_getGenerationID
+    */
+    uint32_t getGenerationID() const;
+
+    /** Returns if SkPath data is consistent. Corrupt SkPath data is detected if
+        internal values are out of range or internal storage does not match
+        array dimensions.
+
+        @return  true if SkPath data is consistent
+    */
+    bool isValid() const;
+
+    using sk_is_trivially_relocatable = std::true_type;
+
+private:
+    SkPath(sk_sp<SkPathRef>, SkPathFillType, bool isVolatile, SkPathConvexity,
+           SkPathFirstDirection firstDirection);
+
+    sk_sp<SkPathRef>               fPathRef;
+    int                            fLastMoveToIndex;
+    mutable std::atomic<uint8_t>   fConvexity;      // SkPathConvexity
+    mutable std::atomic<uint8_t>   fFirstDirection; // SkPathFirstDirection
+    uint8_t                        fFillType    : 2;
+    uint8_t                        fIsVolatile  : 1;
+
+    static_assert(::sk_is_trivially_relocatable<decltype(fPathRef)>::value);
+
+    /** Resets all fields other than fPathRef to their initial 'empty' values.
+     *  Assumes the caller has already emptied fPathRef.
+     *  On Android increments fGenerationID without reseting it.
+     */
+    void resetFields();
+
+    /** Sets all fields other than fPathRef to the values in 'that'.
+     *  Assumes the caller has already set fPathRef.
+     *  Doesn't change fGenerationID or fSourcePath on Android.
+     */
+    void copyFields(const SkPath& that);
+
+    size_t writeToMemoryAsRRect(void* buffer) const;
+    size_t readAsRRect(const void*, size_t);
+    size_t readFromMemory_EQ4Or5(const void*, size_t);
+
+    friend class Iter;
+    friend class SkPathPriv;
+    friend class SkPathStroker;
+
+    /*  Append, in reverse order, the first contour of path, ignoring path's
+        last point. If no moveTo() call has been made for this contour, the
+        first point is automatically set to (0,0).
+    */
+    SkPath& reversePathTo(const SkPath&);
+
+    // called before we add points for lineTo, quadTo, cubicTo, checking to see
+    // if we need to inject a leading moveTo first
+    //
+    //  SkPath path; path.lineTo(...);   <--- need a leading moveTo(0, 0)
+    // SkPath path; ... path.close(); path.lineTo(...) <-- need a moveTo(previous moveTo)
+    //
+    inline void injectMoveToIfNeeded();
+
+    inline bool hasOnlyMoveTos() const;
+
+    SkPathConvexity computeConvexity() const;
+
+    bool isValidImpl() const;
+    /** Asserts if SkPath data is inconsistent.
+        Debugging check intended for internal use only.
+     */
+#ifdef SK_DEBUG
+    void validate() const;
+    void validateRef() const;
+#endif
+
+    // called by stroker to see if all points (in the last contour) are equal and worthy of a cap
+    bool isZeroLengthSincePoint(int startPtIndex) const;
+
+    /** Returns if the path can return a bound at no cost (true) or will have to
+        perform some computation (false).
+     */
+    bool hasComputedBounds() const;
+
+    // 'rect' needs to be sorted
+    void setBounds(const SkRect& rect);
+
+    void setPt(int index, SkScalar x, SkScalar y);
+
+    SkPath& dirtyAfterEdit();
+
+    // Bottlenecks for working with fConvexity and fFirstDirection.
+    // Notice the setters are const... these are mutable atomic fields.
+    void  setConvexity(SkPathConvexity) const;
+
+    void setFirstDirection(SkPathFirstDirection) const;
+    SkPathFirstDirection getFirstDirection() const;
+
+    /** Returns the comvexity type, computing if needed. Never returns kUnknown.
+        @return  path's convexity type (convex or concave)
+    */
+    SkPathConvexity getConvexity() const;
+
+    SkPathConvexity getConvexityOrUnknown() const;
+
+    // Compares the cached value with a freshly computed one (computeConvexity())
+    bool isConvexityAccurate() const;
+
+    /** Stores a convexity type for this path. This is what will be returned if
+     *  getConvexityOrUnknown() is called. If you pass kUnknown, then if getContexityType()
+     *  is called, the real convexity will be computed.
+     *
+     *  example: https://fiddle.skia.org/c/@Path_setConvexity
+     */
+    void setConvexity(SkPathConvexity convexity);
+
+    /** Shrinks SkPath verb array and SkPoint array storage to discard unused capacity.
+     *  May reduce the heap overhead for SkPath known to be fully constructed.
+     *
+     *  NOTE: This may relocate the underlying buffers, and thus any Iterators referencing
+     *        this path should be discarded after calling shrinkToFit().
+     */
+    void shrinkToFit();
+
+    // Creates a new Path after the supplied arguments have been validated by
+    // sk_path_analyze_verbs().
+    static SkPath MakeInternal(const SkPathVerbAnalysis& analsis,
+                               const SkPoint points[],
+                               const uint8_t verbs[],
+                               int verbCount,
+                               const SkScalar conics[],
+                               SkPathFillType fillType,
+                               bool isVolatile);
+
+    friend class SkAutoPathBoundsUpdate;
+    friend class SkAutoDisableOvalCheck;
+    friend class SkAutoDisableDirectionCheck;
+    friend class SkPathBuilder;
+    friend class SkPathEdgeIter;
+    friend class SkPathWriter;
+    friend class SkOpBuilder;
+    friend class SkBench_AddPathTest; // perf test reversePathTo
+    friend class PathTest_Private; // unit test reversePathTo
+    friend class ForceIsRRect_Private; // unit test isRRect
+    friend class FuzzPath; // for legacy access to validateRef
+};
+
+#endif