@polyjose/node 0.1.1 → 0.1.2

package/README.md

@@ -11,146 +11,89 @@ accepted (RFC 8725).
 npm install @polyjose/node
 ```
 
-npm also installs the matching prebuilt addon, `@polyjose/node-<platform>`, for macOS (x64,
-arm64), Linux glibc and musl (x64, arm64) and Windows (x64, arm64). Each is an optional
-dependency at exactly this package's version, and npm installs only the one for your platform.
-If you install with `--omit=optional`, no addon is installed and the import throws.
-
-### Linux glibc floor
-
-The Linux glibc addons (`linux-x64-gnu`, `linux-arm64-gnu`) need **glibc 2.28 or later**. That is
-also the floor of the official Node.js 22 and later Linux builds, so any glibc system that runs
-official Node 22 can load the addon. They are built in the `manylinux_2_28` images (glibc 2.28),
-and the build fails if an addon needs a newer glibc symbol version.
-
-| Distribution | glibc |
-|---|---|
-| RHEL, AlmaLinux, Rocky Linux 8 | 2.28 |
-| Debian 11 | 2.31 |
-| Ubuntu 20.04 | 2.31 |
-| RHEL, AlmaLinux, Rocky Linux 9 | 2.34 |
-| Amazon Linux 2023, AWS Lambda `nodejs22.x` and `nodejs24.x` | 2.34 |
-| Ubuntu 22.04 | 2.35 |
-| Debian 12 | 2.36 |
-| Ubuntu 24.04 | 2.39 |
-
-Any later release of these works too. Amazon Linux 2 (glibc 2.26) is not supported: it reached its
-end of life on 2026-06-30, and official Node 22 doesn't run on it either. Alpine and other musl
-systems use the `linux-x64-musl` and `linux-arm64-musl` addons instead.
-
-## Module format
-
-- The package is **ESM only** and needs **Node.js 22.12 or later**.
-- CommonJS code can still load it with `require("@polyjose/node")`, through Node's `require(esm)`
-  (unflagged since 22.12).
-- Every operation returns a Promise. The work runs on the libuv thread pool, so it doesn't block
-  the event loop.
-- The API and its TypeScript types are the same as `@polyjose/wasm`, so you can switch between
-  the two packages by changing the import.
+Prebuilt for macOS, Linux (glibc and musl) and Windows, see the docs for
+[platform support](https://polyjose.dev/reference/node/). Needs Node.js 22.12 or later.
+
+## Import
+
+The package is ESM:
+
+```js
+import { jwtSign, jwtVerify } from "@polyjose/node";
+```
+
+CommonJS code can load it too, through Node's `require(esm)`:
+
+```js
+const { jwtSign, jwtVerify } = require("@polyjose/node");
+```
+
+Every function returns a Promise, and the work runs on the libuv thread pool, so it doesn't block
+the event loop. The API is the same as `@polyjose/wasm`'s.
+
+## Quick start
+
+Sign a JWT, then verify it with an explicit algorithm allow-list and the issuer and audience you
+expect. `exp` is required and checked, with 60 seconds of leeway (RFC 8725 §3.8 to §3.10).
+
+```js
+import { jwkGenerateForAlg, jwkToPublic, jwtSign, jwtVerify, PolyjoseError } from "@polyjose/node";
+
+// An ES256 key pair. The verifier needs only the public half.
+const privateKey = await jwkGenerateForAlg("ES256");
+const publicKey = await jwkToPublic(privateKey);
+
+const now = Math.floor(Date.now() / 1000);
+const token = await jwtSign(
+  { iss: "https://issuer.example", sub: "user-123", aud: "https://api.example", exp: now + 300 },
+  privateKey,
+  { alg: "ES256" },
+);
+
+try {
+  const verified = await jwtVerify(token, publicKey, {
+    allowedAlgs: ["ES256"], // never trust the token's own `alg` (RFC 8725 §3.1)
+    issuers: ["https://issuer.example"],
+    audiences: ["https://api.example"],
+  });
+  console.log(verified.claims.sub); // "user-123"
+} catch (err) {
+  if (err instanceof PolyjoseError) console.error(err.code); // e.g. "TokenExpired"
+  else throw err;
+}
+```
+
+Encrypt to a recipient's public key, then decrypt, naming the algorithms you accept:
+
+```js
+import { jweDecryptCompact, jweEncryptCompact, jwkGenerateEc, jwkToPublic } from "@polyjose/node";
+
+const recipientKey = await jwkGenerateEc("P-256");
+const recipientPublicKey = await jwkToPublic(recipientKey);
+
+const jwe = await jweEncryptCompact(new TextEncoder().encode("top secret"), {
+  enc: "A256GCM",
+  recipients: [{ alg: "ECDH-ES+A256KW", key: recipientPublicKey }],
+});
+
+const decrypted = await jweDecryptCompact(jwe, recipientKey, {
+  allowedAlgs: ["ECDH-ES+A256KW"],
+  allowedEnc: ["A256GCM"],
+});
+console.log(new TextDecoder().decode(decrypted.plaintext)); // "top secret"
+decrypted.plaintext.fill(0); // results are plain data: wipe secret bytes, and never log them
+```
 
 ## Documentation
 
-Guides and the API reference are at <https://polyjose.dev>. The Node.js guide is at
-<https://polyjose.dev/start/node/>.
-
-## Loading the addon
-
-The package loads **only the polyjose addon whose SHA-256 it was built with**. Otherwise the
-import throws an `Error` with `code` `ERR_POLYJOSE_ADDON_REFUSED`, and nothing it refused has run.
-
-- **The hash pin.** The package ships `addon-sha256.json`: the SHA-256 of each platform's addon,
-  generated when the package is built. Before anything loads, the package picks the one addon file
-  for your platform, the same one the generated napi-rs loader (`binding.cjs`) would pick:
-  1. the file named by `NAPI_RS_NATIVE_LIBRARY_PATH`, if set (see below);
-  2. else a local `polyjose.<platform>.node` next to the loader;
-  3. else the platform package `@polyjose/node-<platform>`, found through Node's normal module
-     resolution: this package's `node_modules`, then every ancestor `node_modules`, then
-     `NODE_PATH`.
-
-  It hashes that file and refuses it unless the hash is the pinned one. The refusal names the
-  platform, both hashes and where the file came from. There is no fallback to another file. So a
-  substitute is refused wherever it was planted, a native addon as much as a JavaScript file,
-  including when the genuine platform package is missing: after `npm install --omit=optional`, or
-  on a platform polyjose doesn't publish. A package without the map, or without an entry for your
-  platform, loads nothing.
-- **No swap after the check.** The package writes the bytes it checked to a new private directory
-  in `os.tmpdir()` (mode `0700`; on Windows, your own `%TEMP%`), checks the copy again, and has
-  the loader load exactly that copy. Then it deletes the copy; the loaded addon stays in memory.
-  Windows can't delete a loaded DLL, so there each copy (the size of the addon) stays in the
-  temporary directory. The temporary directory must allow loading native code: if yours is
-  mounted `noexec`, point `TMPDIR` (`TEMP` on Windows) at one that does.
-- **Every candidate is native.** Before that, everything the loader could pick must be a native
-  `.node` file. If any candidate resolves to something else, such as a JavaScript
-  `@polyjose/node-<platform>` in a parent folder or on `NODE_PATH`, the import throws before that
-  file runs.
-- **After loading,** the result must be exactly the checked copy, not wrapped by any JavaScript,
-  and its own `version()` must be this package's version. An addon from another polyjose release
-  is refused, whatever `NAPI_RS_ENFORCE_VERSION_CHECK` says.
-- polyjose **never publishes a `wasm32-wasi` package**. The napi-rs loader still has a WASI
-  fallback, tried when the native load fails: `./polyjose.wasi.cjs`, then
-  `@polyjose/node-wasm32-wasi`. The package never reaches it. If either WASI file or package can be
-  found from the loader's directory, the import throws before anything is loaded. If loading the
-  checked copy fails, the import throws "Cannot find native binding". For WebAssembly, use
-  `@polyjose/wasm`.
-
-These checks keep the package from *choosing* a substitute. They can't protect against code that
-already runs in your process, which can change anything.
-
-### Environment variables
-
-| Variable | Effect |
-|---|---|
-| `NAPI_RS_NATIVE_LIBRARY_PATH` | Loads the addon from this path instead of the installed one, **only if its SHA-256 is the pinned one** for your platform (see below). |
-| `NAPI_RS_FORCE_WASI` | **Refused.** If it is set, whatever the value (even `false` or empty), the import throws. |
-| `NAPI_RS_WASI_FLAVOR` | **Refused**, like `NAPI_RS_FORCE_WASI`. |
-| `NAPI_RS_ENFORCE_VERSION_CHECK` | Read by the generated loader only. The package checks the hash and the version anyway (see above). |
-
-**`NAPI_RS_NATIVE_LIBRARY_PATH` is held to the same pin.** It names the file the package checks, so
-it can only relocate polyjose's own addon, for example out of an archive or a bundle. A JavaScript
-file there is refused before it runs; any other native library is refused by its hash. The package
-sets the variable to its private copy while the loader runs and restores your value right after.
-
-### A panic in the addon aborts the process
-
-If the Rust code ever panics, Node.js **aborts the whole process** (SIGABRT). The Promise isn't
-rejected, and no `catch` or `process.on("uncaughtException")` handler runs. This fails closed:
-no partial result is returned, and no memory is corrupted. Today we know of no input that causes a
-panic; the core forbids `panic!`, `unwrap` and `expect`. A server that must survive a panic should
-run polyjose in a worker process it can restart. Turning panics into rejected Promises is planned.
-
-### Side effects of loading
-
-- **Linux:** to tell musl from glibc, the package reads `/usr/bin/ldd`, as the generated loader
-  would. If that fails, it calls `process.report.getReport()`, and before that it sets
-  `process.report.excludeNetwork = true` for the whole process. If there is no report either, the
-  import throws. (The loader's last resort, `ldd --version` in a child process, is never run.)
-- **Windows x64:** an embedder that runs Node as a shared library (`node_target_type` is
-  `shared_library`), or a Node whose `shlib_suffix` is `dll.a`, maps to the `win32-x64-gnu`
-  platform, as in the loader. polyjose doesn't publish that addon, so those hosts can't load the
-  package.
-- **Temporary directory:** each import that loads the addon creates one directory in
-  `os.tmpdir()` (see "No swap after the check").
-- **`__napiBindingTarget`:** the loaded addon has an extra property, `__napiBindingTarget`
-  (`"native"`), set by the loader. The package's own API doesn't export it.
-
-## Secrets in results
-
-Results are plain objects, and their byte fields are plain `Uint8Array`s. So **printing a result
-prints its secret bytes**: `console.log`, `util.inspect`, `JSON.stringify` and error reporters
-show every byte. (The Kotlin and Swift bindings redact these fields when printed; JavaScript keeps
-plain data instead, ADR 0065.)
-
-- Never log a `JwsVerified` or `JweDecrypted` result.
-- Never log the options and records that carry a secret: `JwsVerifyOptions` (`detachedPayload`),
-  `JweEncryptOptions` (`aad`), `JwsSigner` and `JweRecipient` (`key`). Never log a private JWK.
-- The seven secret fields are `JwsSigner.key`, `JweRecipient.key`, `JwsVerified.payload`,
-  `JweDecrypted.plaintext`, `JweDecrypted.aad`, `JweEncryptOptions.aad` and
-  `JwsVerifyOptions.detachedPayload`.
-- When you are done with a returned `Uint8Array`, wipe it with `fill(0)`. JavaScript strings, such
-  as a JWK's text, can't be wiped.
+- Getting started on Node.js: <https://polyjose.dev/start/node/>
+- Platform support, how the addon is loaded, and handling secrets in results:
+  <https://polyjose.dev/reference/node/>
+- Guides (sign and verify, encrypt and decrypt, validate a JWT, keys): <https://polyjose.dev>
+- Error codes: <https://polyjose.dev/concepts/errors/>
+- Source and issues: <https://github.com/bharathkontham/polyjose>
 
 ## License
 
-MIT; see `LICENSE`. `THIRD-PARTY-NOTICES.txt` lists the third-party code this package contains.
-Each platform package carries its own `THIRD-PARTY-NOTICES.txt` for the Rust crates compiled into
-its addon.
+MIT; see [LICENSE](https://github.com/bharathkontham/polyjose/blob/main/LICENSE).
+`THIRD-PARTY-NOTICES.txt` in the package lists the third-party code it contains.